@tscircuit/props 0.0.167 → 0.0.169

package/dist/index.d.ts

@@ -5731,7 +5731,7 @@ type ChipProps<PinLabelMap extends PinLabelsProp | string = string> = ChipPropsS
  *   // MyChipPinLabels is "VCC" | "GND" | "DATA"
  *
  */
-type ChipPinLabels<T extends (props: ChipProps<any>) => any> = T extends (props: infer Props) => any ? Props extends ChipProps<infer PinLabelMap> ? PinLabelMap extends PinLabelsProp ? PinLabelFromPinLabelMap<PinLabelMap> : never : never : never;
+type ChipPinLabels<T extends (props: ChipProps<any>) => any> = T extends (props: infer Props) => any ? Props extends ChipProps<infer PinLabelMap> ? PinLabelMap extends PinLabelsProp ? PinLabelFromPinLabelMap<PinLabelMap> : PinLabelMap extends string ? PinLabelMap : never : never : never;
 /**
  * Get the connection prop type for a component
  *
@@ -7939,6 +7939,10 @@ interface OvalPlatedHoleProps extends Omit<PcbLayoutProps, "pcbRotation" | "laye
     holeWidth: number | string;
     holeHeight: number | string;
     portHints?: PortHints;
+    /** @deprecated use holeWidth */
+    innerWidth?: number | string;
+    /** @deprecated use holeHeight */
+    innerHeight?: number | string;
 }
 interface PillPlatedHoleProps extends Omit<PcbLayoutProps, "pcbRotation" | "layer"> {
     name?: string;
@@ -7947,6 +7951,10 @@ interface PillPlatedHoleProps extends Omit<PcbLayoutProps, "pcbRotation" | "laye
     outerHeight: number | string;
     holeWidth: number | string;
     holeHeight: number | string;
+    /** @deprecated use holeWidth */
+    innerWidth?: number | string;
+    /** @deprecated use holeHeight */
+    innerHeight?: number | string;
     portHints?: PortHints;
 }
 interface CircularHoleWithRectPlatedProps extends Omit<PcbLayoutProps, "pcbRotation" | "layer"> {
@@ -7960,7 +7968,7 @@ interface CircularHoleWithRectPlatedProps extends Omit<PcbLayoutProps, "pcbRotat
     portHints?: PortHints;
 }
 type PlatedHoleProps = CirclePlatedHoleProps | OvalPlatedHoleProps | PillPlatedHoleProps | CircularHoleWithRectPlatedProps;
-declare const platedHoleProps: z.ZodUnion<[z.ZodObject<z.objectUtil.extendShape<Omit<{
+declare const platedHoleProps: z.ZodEffects<z.ZodUnion<[z.ZodObject<z.objectUtil.extendShape<Omit<{
     pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     pcbY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     pcbRotation: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
@@ -8013,19 +8021,23 @@ declare const platedHoleProps: z.ZodUnion<[z.ZodObject<z.objectUtil.extendShape<
     shape: z.ZodLiteral<"oval">;
     outerWidth: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
     outerHeight: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
-    holeWidth: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
-    holeHeight: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+    holeWidth: z.ZodEffects<z.ZodType<string | number, z.ZodTypeDef, string | number>, number | undefined, string | number>;
+    holeHeight: z.ZodEffects<z.ZodType<string | number, z.ZodTypeDef, string | number>, number | undefined, string | number>;
+    innerWidth: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    innerHeight: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     portHints: z.ZodOptional<z.ZodArray<z.ZodUnion<[z.ZodString, z.ZodNumber]>, "many">>;
 }>, "strip", z.ZodTypeAny, {
     shape: "oval";
     outerWidth: number;
     outerHeight: number;
-    holeWidth: number;
-    holeHeight: number;
     pcbX?: number | undefined;
     pcbY?: number | undefined;
     name?: string | undefined;
     portHints?: (string | number)[] | undefined;
+    holeWidth?: number | undefined;
+    holeHeight?: number | undefined;
+    innerWidth?: number | undefined;
+    innerHeight?: number | undefined;
 }, {
     shape: "oval";
     outerWidth: string | number;
@@ -8036,6 +8048,8 @@ declare const platedHoleProps: z.ZodUnion<[z.ZodObject<z.objectUtil.extendShape<
     pcbY?: string | number | undefined;
     name?: string | undefined;
     portHints?: (string | number)[] | undefined;
+    innerWidth?: string | number | undefined;
+    innerHeight?: string | number | undefined;
 }>, z.ZodObject<z.objectUtil.extendShape<Omit<{
     pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     pcbY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
@@ -8054,19 +8068,23 @@ declare const platedHoleProps: z.ZodUnion<[z.ZodObject<z.objectUtil.extendShape<
     shape: z.ZodLiteral<"pill">;
     outerWidth: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
     outerHeight: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
-    holeWidth: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
-    holeHeight: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+    holeWidth: z.ZodEffects<z.ZodType<string | number, z.ZodTypeDef, string | number>, number | undefined, string | number>;
+    holeHeight: z.ZodEffects<z.ZodType<string | number, z.ZodTypeDef, string | number>, number | undefined, string | number>;
+    innerWidth: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    innerHeight: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     portHints: z.ZodOptional<z.ZodArray<z.ZodUnion<[z.ZodString, z.ZodNumber]>, "many">>;
 }>, "strip", z.ZodTypeAny, {
     shape: "pill";
     outerWidth: number;
     outerHeight: number;
-    holeWidth: number;
-    holeHeight: number;
     pcbX?: number | undefined;
     pcbY?: number | undefined;
     name?: string | undefined;
     portHints?: (string | number)[] | undefined;
+    holeWidth?: number | undefined;
+    holeHeight?: number | undefined;
+    innerWidth?: number | undefined;
+    innerHeight?: number | undefined;
 }, {
     shape: "pill";
     outerWidth: string | number;
@@ -8077,6 +8095,8 @@ declare const platedHoleProps: z.ZodUnion<[z.ZodObject<z.objectUtil.extendShape<
     pcbY?: string | number | undefined;
     name?: string | undefined;
     portHints?: (string | number)[] | undefined;
+    innerWidth?: string | number | undefined;
+    innerHeight?: string | number | undefined;
 }>, z.ZodEffects<z.ZodObject<z.objectUtil.extendShape<Omit<{
     pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     pcbY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
@@ -8143,7 +8163,93 @@ declare const platedHoleProps: z.ZodUnion<[z.ZodObject<z.objectUtil.extendShape<
     portHints?: (string | number)[] | undefined;
     holeShape?: "circle" | undefined;
     padShape?: "rect" | undefined;
-}>]>;
+}>]>, {
+    shape: "circle";
+    holeDiameter: number;
+    outerDiameter: number;
+    pcbX?: number | undefined;
+    pcbY?: number | undefined;
+    name?: string | undefined;
+    portHints?: (string | number)[] | undefined;
+} | {
+    shape: "oval";
+    outerWidth: number;
+    outerHeight: number;
+    pcbX?: number | undefined;
+    pcbY?: number | undefined;
+    name?: string | undefined;
+    portHints?: (string | number)[] | undefined;
+    holeWidth?: number | undefined;
+    holeHeight?: number | undefined;
+    innerWidth?: number | undefined;
+    innerHeight?: number | undefined;
+} | {
+    shape: "pill";
+    outerWidth: number;
+    outerHeight: number;
+    pcbX?: number | undefined;
+    pcbY?: number | undefined;
+    name?: string | undefined;
+    portHints?: (string | number)[] | undefined;
+    holeWidth?: number | undefined;
+    holeHeight?: number | undefined;
+    innerWidth?: number | undefined;
+    innerHeight?: number | undefined;
+} | {
+    holeDiameter: number;
+    rectPadWidth: number;
+    rectPadHeight: number;
+    pcbX?: number | undefined;
+    pcbY?: number | undefined;
+    name?: string | undefined;
+    shape?: "circularHoleWithRectPad" | undefined;
+    portHints?: (string | number)[] | undefined;
+    holeShape?: "circle" | undefined;
+    padShape?: "rect" | undefined;
+}, {
+    shape: "circle";
+    holeDiameter: string | number;
+    outerDiameter: string | number;
+    pcbX?: string | number | undefined;
+    pcbY?: string | number | undefined;
+    name?: string | undefined;
+    portHints?: (string | number)[] | undefined;
+} | {
+    shape: "oval";
+    outerWidth: string | number;
+    outerHeight: string | number;
+    holeWidth: string | number;
+    holeHeight: string | number;
+    pcbX?: string | number | undefined;
+    pcbY?: string | number | undefined;
+    name?: string | undefined;
+    portHints?: (string | number)[] | undefined;
+    innerWidth?: string | number | undefined;
+    innerHeight?: string | number | undefined;
+} | {
+    shape: "pill";
+    outerWidth: string | number;
+    outerHeight: string | number;
+    holeWidth: string | number;
+    holeHeight: string | number;
+    pcbX?: string | number | undefined;
+    pcbY?: string | number | undefined;
+    name?: string | undefined;
+    portHints?: (string | number)[] | undefined;
+    innerWidth?: string | number | undefined;
+    innerHeight?: string | number | undefined;
+} | {
+    holeDiameter: string | number;
+    rectPadWidth: string | number;
+    rectPadHeight: string | number;
+    pcbX?: string | number | undefined;
+    pcbY?: string | number | undefined;
+    name?: string | undefined;
+    shape?: "circularHoleWithRectPad" | undefined;
+    portHints?: (string | number)[] | undefined;
+    holeShape?: "circle" | undefined;
+    padShape?: "rect" | undefined;
+}>;
 
 interface ResistorProps extends CommonComponentProps {
     resistance: number | string;

package/dist/index.js

@@ -417,6 +417,11 @@ expectTypesMatch(true);
 // lib/components/platedhole.ts
 import { distance as distance8 } from "circuit-json";
 import { z as z23 } from "zod";
+var distanceHiddenUndefined = z23.custom().transform((a) => {
+  if (a === void 0)
+    return void 0;
+  return distance8.parse(a);
+});
 var platedHoleProps = z23.union([
   pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({
     name: z23.string().optional(),
@@ -430,8 +435,10 @@ var platedHoleProps = z23.union([
     shape: z23.literal("oval"),
     outerWidth: distance8,
     outerHeight: distance8,
-    holeWidth: distance8,
-    holeHeight: distance8,
+    holeWidth: distanceHiddenUndefined,
+    holeHeight: distanceHiddenUndefined,
+    innerWidth: distance8.optional().describe("DEPRECATED use holeWidth"),
+    innerHeight: distance8.optional().describe("DEPRECATED use holeHeight"),
     portHints: portHints.optional()
   }),
   pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({
@@ -439,8 +446,10 @@ var platedHoleProps = z23.union([
     shape: z23.literal("pill"),
     outerWidth: distance8,
     outerHeight: distance8,
-    holeWidth: distance8,
-    holeHeight: distance8,
+    holeWidth: distanceHiddenUndefined,
+    holeHeight: distanceHiddenUndefined,
+    innerWidth: distance8.optional().describe("DEPRECATED use holeWidth"),
+    innerHeight: distance8.optional().describe("DEPRECATED use holeHeight"),
     portHints: portHints.optional()
   }),
   pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({
@@ -460,7 +469,15 @@ var platedHoleProps = z23.union([
       message: "Missing required fields for circularHoleWithRectPad"
     }
   )
-]);
+]).refine((a) => {
+  if ("innerWidth" in a && a.innerWidth !== void 0) {
+    a.holeWidth ??= a.innerWidth;
+  }
+  if ("innerHeight" in a && a.innerHeight !== void 0) {
+    a.holeHeight ??= a.innerHeight;
+  }
+  return a;
+});
 expectTypesMatch(true);
 
 // lib/components/resistor.ts

package/dist/index.js.map

@@ -1 +1 @@
-{"version":3,"sources":["../lib/typecheck.ts","../lib/common/direction.ts","../lib/common/portHints.ts","../lib/common/layout.ts","../lib/common/cadModel.ts","../lib/common/point3.ts","../lib/common/footprintProp.ts","../lib/common/schematicPinDefinitions.ts","../lib/common/schematicPinStyle.ts","../lib/components/board.ts","../lib/common/point.ts","../lib/components/group.ts","../lib/manual-edits/manual-edit-events/base_manual_edit_event.ts","../lib/manual-edits/manual-edit-events/edit_pcb_component_location_event.ts","../lib/manual-edits/manual-edit-events/edit_trace_hint_event.ts","../lib/manual-edits/manual-edit-events/edit_schematic_component_location_event.ts","../lib/manual-edits/manual_edit_event.ts","../lib/manual-edits/manual_edits_file.ts","../lib/manual-edits/manual_pcb_placement.ts","../lib/manual-edits/manual_trace_hint.ts","../lib/manual-edits/manual_schematic_placement.ts","../lib/components/chip.ts","../lib/components/jumper.ts","../lib/components/platedhole.ts","../lib/components/resistor.ts","../lib/components/potentiometer.ts","../lib/components/crystal.ts","../lib/components/resonator.ts","../lib/components/stampboard.ts","../lib/components/capacitor.ts","../lib/components/net.ts","../lib/components/constrainedlayout.ts","../lib/common/distance.ts","../lib/components/constraint.ts","../lib/components/smtpad.ts","../lib/components/solderpaste.ts","../lib/components/hole.ts","../lib/components/trace.ts","../lib/components/footprint.ts","../lib/components/battery.ts","../lib/components/pin-header.ts","../lib/components/netalias.ts","../lib/components/push-button.ts","../lib/components/subcircuit.ts","../lib/components/transistor.ts","../lib/components/mosfet.ts","../lib/components/inductor.ts","../lib/components/diode.ts","../lib/components/led.ts","../lib/components/switch.ts","../lib/components/fabrication-note-text.ts","../lib/components/fabrication-note-path.ts","../lib/components/pcb-trace.ts","../lib/components/via.ts","../lib/components/pcb-keepout.ts","../lib/components/power-source.ts","../lib/components/schematic-box.ts","../lib/components/schematic-line.ts","../lib/components/schematic-text.ts","../lib/components/schematic-path.ts","../lib/components/silkscreen-text.ts","../lib/components/silkscreen-path.ts","../lib/components/silkscreen-line.ts","../lib/components/silkscreen-rect.ts","../lib/components/silkscreen-circle.ts","../lib/components/trace-hint.ts","../lib/components/port.ts","../lib/platformConfig.ts"],"sourcesContent":["import type { TypeEqual } from \"ts-expect\"\n\ntype IsNever<T> = [T] extends [never] ? true : false\n\ntype GetMismatchedProps<T1, T2> = {\n  [K in keyof T1 & keyof T2]: T1[K] extends T2[K]\n    ? T2[K] extends T1[K]\n      ? never\n      : K\n    : K\n}[keyof T1 & keyof T2]\n\nexport const expectTypesMatch = <\n  const T1,\n  const T2,\n  T3 = Exclude<keyof T1, keyof T2>,\n  T4 = Exclude<keyof T2, keyof T1>,\n  T5 = GetMismatchedProps<T1, T2>,\n>(\n  shouldBe: IsNever<T3> extends true\n    ? IsNever<T4> extends true\n      ? IsNever<T5> extends true\n        ? TypeEqual<T1, T2>\n        : `property ${T5 extends string ? T5 : \"\"} has mismatched types`\n      : `extra props ${T4 extends string ? T4 : \"\"}`\n    : `missing props ${T3 extends string ? T3 : \"\"}`,\n): void => {}\n\n// ------ TESTS -------\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: number\n    b: number\n  }\n>(\"extra props b\")\n\nexpectTypesMatch<\n  {\n    a: number\n    b: number\n  },\n  {\n    a: number\n  }\n>(\"missing props b\")\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: number\n  }\n>(true)\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: string\n  }\n>(\"property a has mismatched types\")\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nexport const direction = z.enum([\"up\", \"down\", \"left\", \"right\"])\nexport type Direction = \"up\" | \"down\" | \"left\" | \"right\"\n\nexport type DirectionAlongEdge =\n  | \"top-to-bottom\"\n  | \"left-to-right\"\n  | \"bottom-to-top\"\n  | \"right-to-left\"\n\nexport const directionAlongEdge = z.enum([\n  \"top-to-bottom\",\n  \"left-to-right\",\n  \"bottom-to-top\",\n  \"right-to-left\",\n])\n\nexpectTypesMatch<Direction, z.infer<typeof direction>>(true)\nexpectTypesMatch<DirectionAlongEdge, z.infer<typeof directionAlongEdge>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const portHints = z.array(z.string().or(z.number()))\nexport type PortHints = (string | number)[]\n\nexpectTypesMatch<PortHints, z.infer<typeof portHints>>(true)\n","import {\n  type LayerRefInput,\n  distance,\n  layer_ref,\n  rotation,\n  supplier_name,\n} from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport { type CadModelProp, cadModelProp } from \"./cadModel\"\nimport { type Footprint, footprintProp } from \"./footprintProp\"\n\nexport interface PcbLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n  layer?: LayerRefInput\n}\n\nexport interface CommonLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n\n  schX?: string | number\n  schY?: string | number\n  schRotation?: string | number\n\n  layer?: LayerRefInput\n  footprint?: Footprint\n}\n\nexport const pcbLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n})\ntype InferredPcbLayoutProps = z.input<typeof pcbLayoutProps>\nexpectTypesMatch<PcbLayoutProps, InferredPcbLayoutProps>(true)\n\nexport const commonLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n  footprint: footprintProp.optional(),\n})\n\ntype InferredCommonLayoutProps = z.input<typeof commonLayoutProps>\nexpectTypesMatch<CommonLayoutProps, InferredCommonLayoutProps>(true)\n\nexport type SupplierName =\n  | \"jlcpcb\"\n  | \"macrofab\"\n  | \"pcbway\"\n  | \"digikey\"\n  | \"mouser\"\n  | \"lcsc\"\nexport type SupplierPartNumbers = { [k in SupplierName]?: string[] }\nexport interface SupplierProps {\n  supplierPartNumbers?: SupplierPartNumbers\n}\nexport const supplierProps = z.object({\n  supplierPartNumbers: z.record(supplier_name, z.array(z.string())).optional(),\n})\n\nexpectTypesMatch<SupplierProps, z.input<typeof supplierProps>>(true)\n\nexport interface CommonComponentProps extends CommonLayoutProps {\n  key?: any\n  name: string\n  supplierPartNumbers?: SupplierPartNumbers\n  cadModel?: CadModelProp\n  children?: any\n  symbolName?: string\n}\n\nexport const commonComponentProps = commonLayoutProps\n  .merge(supplierProps)\n  .extend({\n    key: z.any().optional(),\n    name: z.string(),\n    cadModel: cadModelProp.optional(),\n    children: z.any().optional(),\n    symbolName: z.string().optional(),\n  })\n\ntype InferredCommonComponentProps = z.input<typeof commonComponentProps>\nexpectTypesMatch<CommonComponentProps, InferredCommonComponentProps>(true)\n\nexport const componentProps = commonComponentProps\nexport type ComponentProps = z.input<typeof componentProps>\n\nexport const lrPins = [\"pin1\", \"left\", \"pin2\", \"right\"] as const\nexport const lrPolarPins = [\n  \"pin1\",\n  \"left\",\n  \"anode\",\n  \"pos\",\n  \"pin2\",\n  \"right\",\n  \"cathode\",\n  \"neg\",\n] as const\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n","import { z } from \"zod\"\nimport { point3 } from \"./point3\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const rotationPoint3 = z.object({\n  x: z.union([z.number(), z.string()]),\n  y: z.union([z.number(), z.string()]),\n  z: z.union([z.number(), z.string()]),\n})\n\nexport interface CadModelBase {\n  rotationOffset?:\n    | number\n    | { x: number | string; y: number | string; z: number | string }\n  positionOffset?: {\n    x: number | string\n    y: number | string\n    z: number | string\n  }\n  size?: { x: number | string; y: number | string; z: number | string }\n}\n\nexport const cadModelBase = z.object({\n  rotationOffset: z.number().or(rotationPoint3).optional(),\n  positionOffset: point3.optional(),\n  size: point3.optional(),\n})\n\nexpectTypesMatch<CadModelBase, z.input<typeof cadModelBase>>(true)\n\nexport interface CadModelStl extends CadModelBase {\n  stlUrl: string\n}\nexport const cadModelStl = cadModelBase.extend({\n  stlUrl: z.string(),\n})\n\nexport interface CadModelObj extends CadModelBase {\n  objUrl: string\n  mtlUrl?: string\n}\nexport const cadModelObj = cadModelBase.extend({\n  objUrl: z.string(),\n  mtlUrl: z.string().optional(),\n})\n\nexport interface CadModelJscad extends CadModelBase {\n  jscad: Record<string, any>\n}\nexport const cadModelJscad = cadModelBase.extend({\n  jscad: z.record(z.any()),\n})\n\nexport type CadModelProp = string | CadModelStl | CadModelObj | CadModelJscad\n\nexport const cadModelProp = z.union([\n  z.string(),\n  cadModelStl,\n  cadModelObj,\n  cadModelJscad,\n])\n\ntype InferredCadModelProp = z.input<typeof cadModelProp>\nexpectTypesMatch<CadModelProp, InferredCadModelProp>(true)\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const point3 = z.object({\n  x: distance,\n  y: distance,\n  z: distance,\n})\n","import type { LayerRef } from \"circuit-json\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\n\n/**\n * This is an abbreviated definition of the soup elements that you can find here:\n * https://docs.tscircuit.com/api-reference/advanced/soup#pcb-smtpad\n */\nexport type FootprintSoupElements = {\n  type: \"pcb_smtpad\" | \"pcb_plated_hole\"\n  x: string | number\n  y: string | number\n  layer?: LayerRef\n  holeDiameter?: string | number\n  outerDiameter?: string | number\n  shape?: \"circle\" | \"rect\"\n  width?: string | number\n  height?: string | number\n  portHints?: string[]\n}\n\nexport type Footprint = string | ReactElement | FootprintSoupElements[]\nexport const footprintProp = z.custom<Footprint>((v) => true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\n/**\n * @deprecated Use SchematicPortArrangementWithPinCounts instead.\n */\nexport interface SchematicPortArrangementWithSizes {\n  leftSize?: number\n  topSize?: number\n  rightSize?: number\n  bottomSize?: number\n}\n\n/**\n * Specifies the number of pins on each side of the schematic box component.\n */\nexport interface SchematicPortArrangementWithPinCounts {\n  leftPinCount?: number\n  topPinCount?: number\n  rightPinCount?: number\n  bottomPinCount?: number\n}\n\nexport interface PinSideDefinition {\n  pins: Array<number | string>\n  direction:\n    | \"top-to-bottom\"\n    | \"left-to-right\"\n    | \"bottom-to-top\"\n    | \"right-to-left\"\n}\n\nexport interface SchematicPortArrangementWithSides {\n  leftSide?: PinSideDefinition\n  topSide?: PinSideDefinition\n  rightSide?: PinSideDefinition\n  bottomSide?: PinSideDefinition\n}\n\nexport interface SchematicPortArrangement\n  extends SchematicPortArrangementWithSizes,\n    SchematicPortArrangementWithSides,\n    SchematicPortArrangementWithPinCounts {}\n\nexport type SchematicPinArrangement = SchematicPortArrangement\nexport type SchematicPinArrangementWithSizes = SchematicPortArrangementWithSizes\nexport type SchematicPinArrangementWithSides = SchematicPortArrangementWithSides\nexport type SchematicPinArrangementWithPinCounts =\n  SchematicPortArrangementWithPinCounts\n\nexport const explicitPinSideDefinition = z.object({\n  pins: z.array(z.union([z.number(), z.string()])),\n  direction: z.union([\n    z.literal(\"top-to-bottom\"),\n    z.literal(\"left-to-right\"),\n    z.literal(\"bottom-to-top\"),\n    z.literal(\"right-to-left\"),\n  ]),\n})\n\n/**\n * @deprecated Use schematicPinArrangement instead.\n */\nexport const schematicPortArrangement = z.object({\n  leftSize: z.number().optional().describe(\"@deprecated, use leftPinCount\"),\n  topSize: z.number().optional().describe(\"@deprecated, use topPinCount\"),\n  rightSize: z.number().optional().describe(\"@deprecated, use rightPinCount\"),\n  bottomSize: z.number().optional().describe(\"@deprecated, use bottomPinCount\"),\n  leftPinCount: z.number().optional(),\n  rightPinCount: z.number().optional(),\n  topPinCount: z.number().optional(),\n  bottomPinCount: z.number().optional(),\n  leftSide: explicitPinSideDefinition.optional(),\n  rightSide: explicitPinSideDefinition.optional(),\n  topSide: explicitPinSideDefinition.optional(),\n  bottomSide: explicitPinSideDefinition.optional(),\n})\n\nexport const schematicPinArrangement = schematicPortArrangement\n\nexpectTypesMatch<\n  SchematicPortArrangement,\n  z.input<typeof schematicPortArrangement>\n>(true)\n","import { distance } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type SchematicPinStyle = Record<\n  string,\n  {\n    marginTop?: number | string\n    marginRight?: number | string\n    marginBottom?: number | string\n    marginLeft?: number | string\n\n    /** @deprecated use marginLeft */\n    leftMargin?: number | string\n    /** @deprecated use marginRight */\n    rightMargin?: number | string\n    /** @deprecated use marginTop */\n    topMargin?: number | string\n    /** @deprecated use marginBottom */\n    bottomMargin?: number | string\n  }\n>\n\nexport const schematicPinStyle = z.record(\n  z.object({\n    marginLeft: distance.optional(),\n    marginRight: distance.optional(),\n    marginTop: distance.optional(),\n    marginBottom: distance.optional(),\n\n    leftMargin: distance.optional(),\n    rightMargin: distance.optional(),\n    topMargin: distance.optional(),\n    bottomMargin: distance.optional(),\n  }),\n)\n\nexpectTypesMatch<SchematicPinStyle, z.input<typeof schematicPinStyle>>(true)\n","import type { LayoutBuilder, ManualEditFile } from \"@tscircuit/layout\"\nimport { distance } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport { type Point, point } from \"lib/common/point\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport { subcircuitGroupProps, type SubcircuitGroupProps } from \"./group\"\n\nexport interface BoardProps extends Omit<SubcircuitGroupProps, \"subcircuit\"> {\n  width?: number | string\n  height?: number | string\n  outline?: Point[]\n  outlineOffsetX?: number | string\n  outlineOffsetY?: number | string\n}\n\nexport const boardProps = subcircuitGroupProps.extend({\n  width: distance.optional(),\n  height: distance.optional(),\n  outline: z.array(point).optional(),\n  outlineOffsetX: distance.optional(),\n  outlineOffsetY: distance.optional(),\n})\n\ntype InferredBoardProps = z.input<typeof boardProps>\nexpectTypesMatch<BoardProps, InferredBoardProps>(true)\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const point = z.object({\n  x: distance,\n  y: distance,\n})\n\nexport type Point = { x: number | string; y: number | string }\n","import type { LayoutBuilder } from \"@tscircuit/layout\"\nimport { layer_ref, length } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport {\n  type CommonLayoutProps,\n  commonLayoutProps,\n  type SupplierPartNumbers,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport type { AnySourceComponent, PcbTrace } from \"circuit-json\"\nimport {\n  manual_edits_file,\n  type ManualEditsFile,\n  type ManualEditsFileInput,\n} from \"lib/manual-edits\"\n\nexport const layoutConfig = z.object({\n  layoutMode: z.enum([\"grid\", \"flex\", \"none\"]).optional(),\n  position: z.enum([\"absolute\", \"relative\"]).optional(),\n\n  grid: z.boolean().optional(),\n  gridCols: z.number().or(z.string()).optional(),\n  gridRows: z.number().or(z.string()).optional(),\n  gridTemplateRows: z.string().optional(),\n  gridTemplateColumns: z.string().optional(),\n  gridTemplate: z.string().optional(),\n  gridGap: z.number().or(z.string()).optional(),\n\n  flex: z.boolean().or(z.string()).optional(),\n  flexDirection: z.enum([\"row\", \"column\"]).optional(),\n  alignItems: z.enum([\"start\", \"center\", \"end\", \"stretch\"]).optional(),\n  justifyContent: z.enum([\"start\", \"center\", \"end\", \"stretch\"]).optional(),\n  flexRow: z.boolean().optional(),\n  flexColumn: z.boolean().optional(),\n  gap: z.number().or(z.string()).optional(),\n})\n\nexport interface LayoutConfig {\n  layoutMode?: \"grid\" | \"flex\" | \"none\"\n  position?: \"absolute\" | \"relative\"\n\n  grid?: boolean\n  gridCols?: number | string\n  gridRows?: number | string\n  gridTemplateRows?: string\n  gridTemplateColumns?: string\n  gridTemplate?: string\n  gridGap?: number | string\n\n  flex?: boolean | string\n  flexDirection?: \"row\" | \"column\"\n  alignItems?: \"start\" | \"center\" | \"end\" | \"stretch\"\n  justifyContent?: \"start\" | \"center\" | \"end\" | \"stretch\"\n  flexRow?: boolean\n  flexColumn?: boolean\n  gap?: number | string\n}\n\nexpectTypesMatch<LayoutConfig, z.input<typeof layoutConfig>>(true)\n\nexport interface BaseGroupProps extends CommonLayoutProps, LayoutConfig {\n  name?: string\n  key?: any\n  children?: any\n\n  pcbWidth?: Distance\n  pcbHeight?: Distance\n  schWidth?: Distance\n  schHeight?: Distance\n\n  pcbLayout?: LayoutConfig\n  schLayout?: LayoutConfig\n}\n\nexport type PartsEngine = {\n  findPart: (params: {\n    sourceComponent: AnySourceComponent\n    footprinterString?: string\n  }) => Promise<SupplierPartNumbers> | SupplierPartNumbers\n}\n\nexport interface PcbRouteCache {\n  pcbTraces: PcbTrace[]\n  cacheKey: string\n}\n\nexport interface AutorouterConfig {\n  serverUrl?: string\n  inputFormat?: \"simplified\" | \"circuit-json\"\n  serverMode?: \"job\" | \"solve-endpoint\"\n  serverCacheEnabled?: boolean\n  cache?: PcbRouteCache\n  groupMode?: \"sequential-trace\" | \"subcircuit\"\n  local?: boolean\n  algorithmFn?: (simpleRouteJson: any) => Promise<any>\n}\n\nexport type AutorouterProp =\n  | AutorouterConfig\n  | \"sequential-trace\"\n  | \"subcircuit\"\n  | \"auto\"\n  | \"auto-local\"\n  | \"auto-cloud\"\n\nexport const autorouterConfig = z.object({\n  serverUrl: z.string().optional(),\n  inputFormat: z.enum([\"simplified\", \"circuit-json\"]).optional(),\n  serverMode: z.enum([\"job\", \"solve-endpoint\"]).optional(),\n  serverCacheEnabled: z.boolean().optional(),\n  cache: z.custom<PcbRouteCache>((v) => true).optional(),\n  groupMode: z.enum([\"sequential-trace\", \"subcircuit\"]).optional(),\n  algorithmFn: z\n    .custom<(simpleRouteJson: any) => Promise<any>>(\n      (v) => typeof v === \"function\" || v === undefined,\n    )\n    .optional(),\n  local: z.boolean().optional(),\n})\n\nexport const autorouterProp = z.union([\n  autorouterConfig,\n  z.literal(\"sequential-trace\"),\n  z.literal(\"subcircuit\"),\n  z.literal(\"auto\"),\n  z.literal(\"auto-local\"),\n  z.literal(\"auto-cloud\"),\n])\n\nexport interface SubcircuitGroupProps extends BaseGroupProps {\n  layout?: LayoutBuilder\n  manualEdits?: ManualEditsFileInput\n  routingDisabled?: boolean\n  defaultTraceWidth?: Distance\n  minTraceWidth?: Distance\n  pcbRouteCache?: PcbRouteCache\n\n  autorouter?: AutorouterProp\n\n  /**\n   * If true, we'll automatically layout the schematic for this group. Must be\n   * a subcircuit (currently). This is eventually going to be replaced with more\n   * sophisticated layout options/modes and will be enabled by default.\n   */\n  schAutoLayoutEnabled?: boolean\n\n  /**\n   * If true, net labels will automatically be created for complex traces\n   */\n  schTraceAutoLabelEnabled?: boolean\n\n  partsEngine?: PartsEngine\n}\n\nexport interface SubcircuitGroupPropsWithBool extends SubcircuitGroupProps {\n  subcircuit: true\n}\n\nexport interface NonSubcircuitGroupProps extends BaseGroupProps {\n  subcircuit?: false | undefined\n}\n\nexport type GroupProps = SubcircuitGroupPropsWithBool | NonSubcircuitGroupProps\n\nexport const baseGroupProps = commonLayoutProps.extend({\n  name: z.string().optional(),\n  children: z.any().optional(),\n  key: z.any().optional(),\n\n  ...layoutConfig.shape,\n  pcbWidth: length.optional(),\n  pcbHeight: length.optional(),\n  schWidth: length.optional(),\n  schHeight: length.optional(),\n  pcbLayout: layoutConfig.optional(),\n  schLayout: layoutConfig.optional(),\n})\n\nexport const partsEngine = z.custom<PartsEngine>((v) => \"findPart\" in v)\n\nexport const subcircuitGroupProps = baseGroupProps.extend({\n  layout: z.custom<LayoutBuilder>((v) => true).optional(),\n  manualEdits: manual_edits_file.optional(),\n  schAutoLayoutEnabled: z.boolean().optional(),\n  schTraceAutoLabelEnabled: z.boolean().optional(),\n  routingDisabled: z.boolean().optional(),\n  defaultTraceWidth: length.optional(),\n  minTraceWidth: length.optional(),\n  partsEngine: partsEngine.optional(),\n  pcbRouteCache: z.custom<PcbRouteCache>((v) => true).optional(),\n  autorouter: autorouterProp.optional(),\n})\n\nexport const subcircuitGroupPropsWithBool = subcircuitGroupProps.extend({\n  subcircuit: z.literal(true),\n})\n\nexport const groupProps = z.discriminatedUnion(\"subcircuit\", [\n  baseGroupProps.extend({ subcircuit: z.literal(false).optional() }),\n  subcircuitGroupPropsWithBool,\n])\n\ntype InferredBaseGroupProps = z.input<typeof baseGroupProps>\ntype InferredSubcircuitGroupPropsWithBool = z.input<\n  typeof subcircuitGroupPropsWithBool\n>\n\nexpectTypesMatch<BaseGroupProps, InferredBaseGroupProps>(true)\nexpectTypesMatch<\n  SubcircuitGroupPropsWithBool,\n  InferredSubcircuitGroupPropsWithBool\n>(true)\n\ntype InferredGroupProps = z.input<typeof groupProps>\nexpectTypesMatch<GroupProps, InferredGroupProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport const base_manual_edit_event = z.object({\n  edit_event_id: z.string(),\n  in_progress: z.boolean().optional(),\n  created_at: z.number(),\n})\n\nexport interface BaseManualEditEvent {\n  edit_event_id: string\n  in_progress?: boolean\n  created_at: number\n}\n\nexport type BaseManualEditEventInput = z.input<typeof base_manual_edit_event>\n\nexpectTypesMatch<BaseManualEditEvent, z.infer<typeof base_manual_edit_event>>(\n  true,\n)\n","import { z } from \"zod\"\nimport {\n  base_manual_edit_event,\n  type BaseManualEditEvent,\n} from \"./base_manual_edit_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const edit_pcb_component_location_event = base_manual_edit_event.extend({\n  pcb_edit_event_type: z\n    .literal(\"edit_component_location\")\n    .describe(\"deprecated\"),\n  edit_event_type: z.literal(\"edit_pcb_component_location\"),\n  pcb_component_id: z.string(),\n  original_center: z.object({ x: z.number(), y: z.number() }),\n  new_center: z.object({ x: z.number(), y: z.number() }),\n})\n\n/** @deprecated use edit_pcb_component_location_event instead */\nexport const edit_component_location_event = edit_pcb_component_location_event\n\nexport interface EditPcbComponentLocationEvent extends BaseManualEditEvent {\n  edit_event_type: \"edit_pcb_component_location\"\n  /** @deprecated */\n  pcb_edit_event_type: \"edit_component_location\"\n  pcb_component_id: string\n  original_center: { x: number; y: number }\n  new_center: { x: number; y: number }\n}\n\nexport type EditPcbComponentLocationEventInput = z.input<\n  typeof edit_pcb_component_location_event\n>\n\nexpectTypesMatch<\n  EditPcbComponentLocationEvent,\n  z.infer<typeof edit_pcb_component_location_event>\n>(true)\n","import { z } from \"zod\"\nimport {\n  base_manual_edit_event,\n  type BaseManualEditEvent,\n} from \"./base_manual_edit_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { route_hint_point } from \"circuit-json\"\n\nexport const edit_trace_hint_event = base_manual_edit_event.extend({\n  pcb_edit_event_type: z.literal(\"edit_trace_hint\").describe(\"deprecated\"),\n  edit_event_type: z.literal(\"edit_pcb_trace_hint\").optional(),\n  pcb_port_id: z.string(),\n  pcb_trace_hint_id: z.string().optional(),\n  route: z.array(\n    z.object({ x: z.number(), y: z.number(), via: z.boolean().optional() }),\n  ),\n})\n\nexport interface EditTraceHintEvent extends BaseManualEditEvent {\n  /** @deprecated */\n  pcb_edit_event_type: \"edit_trace_hint\"\n  edit_event_type?: \"edit_pcb_trace_hint\"\n  pcb_port_id: string\n  pcb_trace_hint_id?: string\n  route: Array<{ x: number; y: number; via?: boolean }>\n}\n\nexport type EditTraceHintEventInput = z.input<typeof edit_trace_hint_event>\n\nexpectTypesMatch<EditTraceHintEvent, z.infer<typeof edit_trace_hint_event>>(\n  true,\n)\n","import { z } from \"zod\"\nimport {\n  base_manual_edit_event,\n  type BaseManualEditEvent,\n} from \"./base_manual_edit_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const edit_schematic_component_location_event =\n  base_manual_edit_event.extend({\n    edit_event_type: z.literal(\"edit_schematic_component_location\"),\n    schematic_component_id: z.string(),\n    original_center: z.object({ x: z.number(), y: z.number() }),\n    new_center: z.object({ x: z.number(), y: z.number() }),\n  })\n\nexport interface EditSchematicComponentLocationEvent\n  extends BaseManualEditEvent {\n  edit_event_type: \"edit_schematic_component_location\"\n  schematic_component_id: string\n  original_center: { x: number; y: number }\n  new_center: { x: number; y: number }\n}\n\nexport type EditSchematicComponentLocationEventInput = z.input<\n  typeof edit_schematic_component_location_event\n>\n\nexpectTypesMatch<\n  EditSchematicComponentLocationEvent,\n  z.infer<typeof edit_schematic_component_location_event>\n>(true)\n","import { z } from \"zod\"\nimport {\n  edit_pcb_component_location_event,\n  type EditPcbComponentLocationEvent,\n} from \"./manual-edit-events/edit_pcb_component_location_event\"\nimport {\n  edit_schematic_component_location_event,\n  type EditSchematicComponentLocationEvent,\n} from \"./manual-edit-events/edit_schematic_component_location_event\"\nimport {\n  edit_trace_hint_event,\n  type EditTraceHintEvent,\n} from \"./manual-edit-events/edit_trace_hint_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type ManualEditEvent =\n  | EditPcbComponentLocationEvent\n  | EditTraceHintEvent\n  | EditSchematicComponentLocationEvent\n\nexport const manual_edit_event = z.union([\n  edit_pcb_component_location_event,\n  edit_trace_hint_event,\n  edit_schematic_component_location_event,\n])\n\nexport type ManualEditEventInput = z.input<typeof manual_edit_event>\ntype InferredManualEditEvent = z.infer<typeof manual_edit_event>\n\nexpectTypesMatch<ManualEditEvent, InferredManualEditEvent>(true)\n","import { z } from \"zod\"\nimport {\n  manual_pcb_placement,\n  type ManualPcbPlacement,\n} from \"./manual_pcb_placement\"\nimport { manual_edit_event } from \"./manual_edit_event\"\nimport { manual_trace_hint, type ManualTraceHint } from \"./manual_trace_hint\"\nimport {\n  manual_schematic_placement,\n  type ManualSchematicPlacement,\n} from \"./manual_schematic_placement\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_edits_file = z.object({\n  pcb_placements: z.array(manual_pcb_placement).optional(),\n  manual_trace_hints: z.array(manual_trace_hint).optional(),\n  schematic_placements: z.array(manual_schematic_placement).optional(),\n})\n\nexport interface ManualEditsFile {\n  pcb_placements?: ManualPcbPlacement[]\n  manual_trace_hints?: ManualTraceHint[]\n  schematic_placements?: ManualSchematicPlacement[]\n}\n\nexport type ManualEditsFileInput = z.input<typeof manual_edits_file>\n\nexpectTypesMatch<ManualEditsFile, z.infer<typeof manual_edits_file>>(true)\n","import { z } from \"zod\"\nimport { point, type Point } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_pcb_placement = z.object({\n  selector: z.string(),\n  relative_to: z\n    .string()\n    .optional()\n    .default(\"group_center\")\n    .describe(\"Can be a selector or 'group_center'\"),\n  center: point,\n})\n\nexport interface ManualPcbPlacement {\n  selector: string\n  relative_to: string\n  center: Point\n}\n\nexport type ManualPcbPlacementInput = z.input<typeof manual_pcb_placement>\ntype InferredManualPcbPlacement = z.infer<typeof manual_pcb_placement>\n\nexpectTypesMatch<ManualPcbPlacement, InferredManualPcbPlacement>(true)\n","import { z } from \"zod\"\nimport { layer_ref, route_hint_point, type RouteHintPoint } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_trace_hint = z.object({\n  pcb_port_selector: z.string(),\n  offsets: z.array(route_hint_point),\n})\n\nexport interface ManualTraceHint {\n  pcb_port_selector: string\n  offsets: Array<RouteHintPoint>\n}\n\nexport type ManualTraceHintInput = z.input<typeof manual_trace_hint>\n\nexpectTypesMatch<ManualTraceHint, z.infer<typeof manual_trace_hint>>(true)\n","import { z } from \"zod\"\nimport { point, type Point } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_schematic_placement = z.object({\n  selector: z.string(),\n  relative_to: z\n    .string()\n    .optional()\n    .default(\"group_center\")\n    .describe(\"Can be a selector or 'group_center'\"),\n  center: point,\n})\n\nexport interface ManualSchematicPlacement {\n  selector: string\n  relative_to: string\n  center: Point\n}\n\nexport type ManualSchematicPlacementInput = z.input<\n  typeof manual_schematic_placement\n>\ntype InferredManualSchematicPlacement = z.infer<\n  typeof manual_schematic_placement\n>\n\nexpectTypesMatch<ManualSchematicPlacement, InferredManualSchematicPlacement>(\n  true,\n)\n","import { distance } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  type SchematicPortArrangement,\n  schematicPortArrangement as schematicPinArrangement,\n} from \"lib/common/schematicPinDefinitions\"\nimport {\n  type SchematicPinStyle,\n  schematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type ConnectionTarget = string\nexport type Connections<PinLabel extends string = string> = Partial<\n  Record<\n    PinLabel,\n    ConnectionTarget | ConnectionTarget[] | readonly ConnectionTarget[]\n  >\n>\n\nexport type PinLabelsProp<\n  PinNumber extends string = string,\n  PinLabel extends string = string,\n> = Record<PinNumber, PinLabel | readonly PinLabel[] | PinLabel[]>\n\nexport type PinLabelFromPinLabelMap<PinLabelMap extends PinLabelsProp> =\n  PinLabelMap extends PinLabelsProp<infer PinNumber, infer PinLabel>\n    ? PinLabel\n    : never\n\nexport interface ChipPropsSU<PinLabel extends string = string>\n  extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: PinLabelsProp<string, PinLabel>\n  schPinArrangement?: SchematicPortArrangement\n  /** @deprecated Use schPinArrangement instead. */\n  schPortArrangement?: SchematicPortArrangement\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: Distance\n  schWidth?: Distance\n  schHeight?: Distance\n  noSchematicRepresentation?: boolean\n  internallyConnectedPins?: string[][]\n  externallyConnectedPins?: string[][]\n  connections?: Connections<PinLabel>\n}\n\nexport type ChipProps<PinLabelMap extends PinLabelsProp | string = string> =\n  ChipPropsSU<\n    PinLabelMap extends PinLabelsProp\n      ? PinLabelFromPinLabelMap<PinLabelMap>\n      : PinLabelMap\n  >\n\n/**\n * Get the pin labels for a component\n *\n *   const pinLabels = { pin1: \"VCC\", pin2: \"GND\", pin3: \"DATA\" } as const\n *   export const MyChip = (props: ChipProps<typeof pinLabels>) => {\n *     // ...\n *   }\n *   type MyChipPinLabels = ChipPinLabels<typeof MyChip>\n *   // MyChipPinLabels is \"VCC\" | \"GND\" | \"DATA\"\n *\n */\nexport type ChipPinLabels<T extends (props: ChipProps<any>) => any> =\n  T extends (props: infer Props) => any\n    ? Props extends ChipProps<infer PinLabelMap>\n      ? PinLabelMap extends PinLabelsProp\n        ? PinLabelFromPinLabelMap<PinLabelMap>\n        : never\n      : never\n    : never\n\n/**\n * Get the connection prop type for a component\n *\n *   const pinLabels = { pin1: \"VCC\", pin2: \"GND\", pin3: \"DATA\" } as const\n *   export const MyChip = (props: ChipProps<typeof pinLabels>) => {\n *     // ...\n *   }\n *   const connections: ChipConnections<typeof MyChip> = {\n *     VCC: \"...\",\n *     GND: \"...\",\n *     DATA: \"...\",\n *   }\n *\n */\nexport type ChipConnections<T extends (props: ChipProps<any>) => any> = {\n  [K in ChipPinLabels<T>]: string\n}\n\nconst connectionTarget = z\n  .string()\n  .or(z.array(z.string()).readonly())\n  .or(z.array(z.string()))\n\nconst connectionsProp = z\n  .custom<Connections>()\n  .pipe(z.record(z.string(), connectionTarget))\n\nexport const pinLabelsProp = z.record(\n  z.string(),\n  z.string().or(z.array(z.string()).readonly()).or(z.array(z.string())),\n)\n\nexpectTypesMatch<PinLabelsProp, z.input<typeof pinLabelsProp>>(true)\n\nexport const chipProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: pinLabelsProp.optional(),\n  internallyConnectedPins: z.array(z.array(z.string())).optional(),\n  externallyConnectedPins: z.array(z.array(z.string())).optional(),\n  schPinArrangement: schematicPinArrangement.optional(),\n  schPortArrangement: schematicPinArrangement.optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n  noSchematicRepresentation: z.boolean().optional(),\n  connections: connectionsProp.optional(),\n})\n\n/**\n * @deprecated Use ChipProps instead.\n */\nexport const bugProps = chipProps\nexport type InferredChipProps = z.input<typeof chipProps>\n\n// Chip props are too complex to match up with zod types, we typecheck\n// them separately in the test files\nexpectTypesMatch<InferredChipProps, ChipPropsSU<string>>(true)\n","import { distance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  type SchematicPortArrangement,\n  schematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\nimport {\n  type SchematicPinStyle,\n  schematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface JumperProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string | string[]>\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: number | string\n  schWidth?: number | string\n  schHeight?: number | string\n  schDirection?: \"left\" | \"right\"\n  schPortArrangement?: SchematicPortArrangement\n}\n\nexport const jumperProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z\n    .record(z.number().or(z.string()), z.string().or(z.array(z.string())))\n    .optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n  schDirection: z.enum([\"left\", \"right\"]).optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n})\n\ntype InferredJumperProps = z.input<typeof jumperProps>\nexpectTypesMatch<JumperProps, InferredJumperProps>(true)\n","import { distance } from \"circuit-json\"\nimport type { PcbLayoutProps } from \"lib/common/layout\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { type PortHints, portHints } from \"lib/common/portHints\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface CirclePlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"circle\"\n  holeDiameter: number | string\n  outerDiameter: number | string\n  portHints?: PortHints\n}\n\nexport interface OvalPlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"oval\"\n  outerWidth: number | string\n  outerHeight: number | string\n  holeWidth: number | string\n  holeHeight: number | string\n  portHints?: PortHints\n}\n\nexport interface PillPlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"pill\"\n  outerWidth: number | string\n  outerHeight: number | string\n  holeWidth: number | string\n  holeHeight: number | string\n  portHints?: PortHints\n}\n\nexport interface CircularHoleWithRectPlatedProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  holeDiameter: number | string\n  rectPadWidth: number | string\n  rectPadHeight: number | string\n  holeShape?: \"circle\"\n  padShape?: \"rect\"\n  shape?: \"circularHoleWithRectPad\"\n  portHints?: PortHints\n}\n\nexport type PlatedHoleProps =\n  | CirclePlatedHoleProps\n  | OvalPlatedHoleProps\n  | PillPlatedHoleProps\n  | CircularHoleWithRectPlatedProps\n\nexport const platedHoleProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"circle\"),\n    holeDiameter: distance,\n    outerDiameter: distance,\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"oval\"),\n    outerWidth: distance,\n    outerHeight: distance,\n    holeWidth: distance,\n    holeHeight: distance,\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"pill\"),\n    outerWidth: distance,\n    outerHeight: distance,\n    holeWidth: distance,\n    holeHeight: distance,\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps\n    .omit({ pcbRotation: true, layer: true })\n    .extend({\n      name: z.string().optional(),\n      holeDiameter: distance,\n      rectPadWidth: distance,\n      rectPadHeight: distance,\n      holeShape: z.literal(\"circle\").optional(),\n      padShape: z.literal(\"rect\").optional(),\n      shape: z.literal(\"circularHoleWithRectPad\").optional(),\n      portHints: portHints.optional(),\n    })\n    .refine(\n      (prop) => {\n        return prop.shape === \"circularHoleWithRectPad\"\n          ? prop.holeDiameter && prop.rectPadWidth && prop.rectPadHeight\n          : true\n      },\n      {\n        message: \"Missing required fields for circularHoleWithRectPad\",\n      },\n    ),\n])\n\ntype InferredPlatedHoleProps = z.input<typeof platedHoleProps>\n\nexpectTypesMatch<PlatedHoleProps, InferredPlatedHoleProps>(true)\n","import { resistance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ResistorProps extends CommonComponentProps {\n  resistance: number | string\n  pullupFor?: string\n  pullupTo?: string\n  pulldownFor?: string\n  pulldownTo?: string\n}\n\nexport const resistorProps = commonComponentProps.extend({\n  resistance,\n\n  pullupFor: z.string().optional(),\n  pullupTo: z.string().optional(),\n\n  pulldownFor: z.string().optional(),\n  pulldownTo: z.string().optional(),\n})\nexport const resistorPins = lrPins\n\ntype InferredResistorProps = z.input<typeof resistorProps>\nexpectTypesMatch<ResistorProps, InferredResistorProps>(true)\n","import { resistance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type PotentiometerPinVariant = \"two_pin\" | \"three_pin\"\n\nexport interface PotentiometerProps extends CommonComponentProps {\n  maxResistance: number | string\n  pinVariant?: PotentiometerPinVariant\n}\n\nexport const potentiometerProps = commonComponentProps.extend({\n  maxResistance: resistance,\n  pinVariant: z.enum([\"two_pin\", \"three_pin\"]).optional(),\n})\n\ntype InferredPotentiometerProps = z.input<typeof potentiometerProps>\nexpectTypesMatch<PotentiometerProps, InferredPotentiometerProps>(true)\n","import { frequency, capacitance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type PinVariant = \"two_pin\" | \"four_pin\"\n\nexport interface CrystalProps extends CommonComponentProps {\n  frequency: number | string\n  loadCapacitance: number | string\n  pinVariant?: PinVariant\n}\n\nexport const crystalProps = commonComponentProps.extend({\n  frequency: frequency,\n  loadCapacitance: capacitance,\n  pinVariant: z.enum([\"two_pin\", \"four_pin\"]).optional(),\n})\nexport const crystalPins = lrPins\n\ntype InferredCrystalProps = z.input<typeof crystalProps>\nexpectTypesMatch<CrystalProps, InferredCrystalProps>(true)\n","import { frequency, capacitance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type ResonatorPinVariant = \"no_ground\" | \"ground_pin\" | \"two_ground_pins\"\n\nexport interface ResonatorProps extends CommonComponentProps {\n  frequency: number | string\n  loadCapacitance: number | string\n  pinVariant?: ResonatorPinVariant\n}\n\nexport const resonatorProps = commonComponentProps.extend({\n  frequency: frequency,\n  loadCapacitance: capacitance,\n  pinVariant: z.enum([\"no_ground\", \"ground_pin\", \"two_ground_pins\"]).optional(),\n})\n\ntype InferredResonatorProps = z.input<typeof resonatorProps>\nexpectTypesMatch<ResonatorProps, InferredResonatorProps>(true)\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { boardProps, type BoardProps } from \"lib/components/board\"\n\nexport interface StampboardProps extends BoardProps {\n  leftPinCount?: number\n  rightPinCount?: number\n  topPinCount?: number\n  bottomPinCount?: number\n  leftPins?: string[]\n  rightPins?: string[]\n  topPins?: string[]\n  bottomPins?: string[]\n  pinPitch?: number | string\n  innerHoles?: boolean\n}\n\nexport const stampboardProps = boardProps.extend({\n  leftPinCount: z.number().optional(),\n  rightPinCount: z.number().optional(),\n  topPinCount: z.number().optional(),\n  bottomPinCount: z.number().optional(),\n  leftPins: z.array(z.string()).optional(),\n  rightPins: z.array(z.string()).optional(),\n  topPins: z.array(z.string()).optional(),\n  bottomPins: z.array(z.string()).optional(),\n  pinPitch: distance.optional(),\n  innerHoles: z.boolean().optional(),\n})\n\ntype InferredStampboardProps = z.input<typeof stampboardProps>\nexpectTypesMatch<StampboardProps, InferredStampboardProps>(true)\n","import { capacitance, voltage } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPolarPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface CapacitorProps extends CommonComponentProps {\n  capacitance: number | string\n  maxVoltageRating?: number | string\n  schShowRatings?: boolean\n  polarized?: boolean\n  decouplingFor?: string\n  decouplingTo?: string\n  bypassFor?: string\n  bypassTo?: string\n  maxDecouplingTraceLength?: number\n}\n\nexport const capacitorProps = commonComponentProps.extend({\n  capacitance,\n  maxVoltageRating: voltage.optional(),\n  schShowRatings: z.boolean().optional().default(false),\n  polarized: z.boolean().optional().default(false),\n  decouplingFor: z.string().optional(),\n  decouplingTo: z.string().optional(),\n  bypassFor: z.string().optional(),\n  bypassTo: z.string().optional(),\n  maxDecouplingTraceLength: z.number().optional(),\n})\nexport const capacitorPins = lrPolarPins\n\nexpectTypesMatch<CapacitorProps, z.input<typeof capacitorProps>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface NetProps {\n  name: string\n}\n\nexport const netProps = z.object({\n  name: z.string(),\n})\n\ntype InferredNetProps = z.input<typeof netProps>\nexpectTypesMatch<NetProps, InferredNetProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ConstrainedLayoutProps {\n  name?: string\n  pcbOnly?: boolean\n  schOnly?: boolean\n}\n\nexport const constrainedLayoutProps = z.object({\n  name: z.string().optional(),\n  pcbOnly: z.boolean().optional(),\n  schOnly: z.boolean().optional(),\n})\n\nexport type InferredConstrainedLayoutProps = z.input<\n  typeof constrainedLayoutProps\n>\n\nexpectTypesMatch<InferredConstrainedLayoutProps, ConstrainedLayoutProps>(true)\n","import { z } from \"zod\"\n\nexport type Distance = number | string\n\nexport { distance, length } from \"circuit-json\"\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport type { Distance } from \"lib/common/distance\"\nimport { distance } from \"lib/common/distance\"\nimport { z } from \"zod\"\n\nexport type PcbXDistConstraint = {\n  pcb?: true\n  xDist: Distance\n\n  /**\n   * Selector for left component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  left: string\n\n  /**\n   * Selector for right component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  right: string\n\n  /**\n   * If true, the provided distance is the distance between the closest edges of\n   * the left and right components\n   */\n  edgeToEdge?: true\n\n  /**\n   * If true, the provided distance is the distance between the centers of the\n   * left and right components\n   */\n  centerToCenter?: true\n}\n\nexport type PcbYDistConstraint = {\n  pcb?: true\n  yDist: Distance\n\n  /**\n   * Selector for top component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 topedge\", \".R1 center\"\n   */\n  top: string\n\n  /**\n   * Selector for bottom component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 bottomedge\", \".R1 center\"\n   */\n  bottom: string\n\n  edgeToEdge?: true\n  centerToCenter?: true\n}\n\nexport type PcbSameYConstraint = {\n  pcb?: true\n  sameY?: true\n\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type PcbSameXConstraint = {\n  pcb?: true\n  sameX?: true\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type ConstraintProps =\n  | PcbXDistConstraint\n  | PcbYDistConstraint\n  | PcbSameYConstraint\n  | PcbSameXConstraint\n\n// -----------------------------------------------------------------------------\n// Zod\n// -----------------------------------------------------------------------------\n\nexport const pcbXDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  xDist: distance,\n  left: z.string(),\n  right: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbXDistConstraint, z.input<typeof pcbXDistConstraintProps>>(\n  true,\n)\n\nexport const pcbYDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  yDist: distance,\n  top: z.string(),\n  bottom: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbYDistConstraint, z.input<typeof pcbYDistConstraintProps>>(\n  true,\n)\n\nexport const pcbSameYConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameY: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameYConstraint, z.input<typeof pcbSameYConstraintProps>>(\n  true,\n)\n\nexport const pcbSameXConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameX: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameXConstraint, z.input<typeof pcbSameXConstraintProps>>(\n  true,\n)\n\nexport const constraintProps = z.union([\n  pcbXDistConstraintProps,\n  pcbYDistConstraintProps,\n  pcbSameYConstraintProps,\n  pcbSameXConstraintProps,\n])\n\nexpectTypesMatch<ConstraintProps, z.input<typeof constraintProps>>(true)\n","import {\n  pcbLayoutProps,\n  type CommonLayoutProps,\n  type PcbLayoutProps,\n} from \"lib/common/layout\"\nimport { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { portHints, type PortHints } from \"lib/common/portHints\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n  portHints?: PortHints\n}\n\nexport interface RotatedRectSmtPadProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rotated_rect\"\n  width: Distance\n  height: Distance\n  ccwRotation: number\n  portHints?: PortHints\n}\n\nexport interface CircleSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n  portHints?: PortHints\n}\n\nexport interface PillSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"pill\"\n  width: Distance\n  height: Distance\n  radius: Distance\n  portHints?: PortHints\n}\n\nexport type SmtPadProps =\n  | RectSmtPadProps\n  | CircleSmtPadProps\n  | RotatedRectSmtPadProps\n  | PillSmtPadProps\n\n// ----------------------------------------------------------------------------\n// Zod\n// ----------------------------------------------------------------------------\n\nexport const rectSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredRectSmtPadProps = z.input<typeof rectSmtPadProps>\nexpectTypesMatch<InferredRectSmtPadProps, RectSmtPadProps>(true)\n\nexport const rotatedRectSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rotated_rect\"),\n    width: distance,\n    height: distance,\n    ccwRotation: z.number(),\n    portHints: portHints.optional(),\n  })\ntype InferredRotatedRectSmtPadProps = z.input<typeof rotatedRectSmtPadProps>\nexpectTypesMatch<InferredRotatedRectSmtPadProps, RotatedRectSmtPadProps>(true)\n\nexport const circleSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredCircleSmtPadProps = z.input<typeof circleSmtPadProps>\nexpectTypesMatch<InferredCircleSmtPadProps, CircleSmtPadProps>(true)\n\nexport const pillSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"pill\"),\n    width: distance,\n    height: distance,\n    radius: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredPillSmtPadProps = z.input<typeof pillSmtPadProps>\nexpectTypesMatch<InferredPillSmtPadProps, PillSmtPadProps>(true)\n\nexport const smtPadProps = z.union([\n  circleSmtPadProps,\n  rectSmtPadProps,\n  rotatedRectSmtPadProps,\n  pillSmtPadProps,\n])\n\nexport type InferredSmtPadProps = z.input<typeof smtPadProps>\nexpectTypesMatch<InferredSmtPadProps, SmtPadProps>(true)\n","import { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { boolean, string, z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n}\n\nexport interface CircleSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n}\n\nexport type SolderPasteProps = RectSolderPasteProps | CircleSolderPasteProps\n\n// zod\n\nexport const rectSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  })\ntype InferredRectSolderPasteProps = z.input<typeof rectSolderPasteProps>\nexpectTypesMatch<InferredRectSolderPasteProps, RectSolderPasteProps>(true)\n\nexport const circleSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  })\ntype InferredCircleSolderPasteProps = z.input<typeof circleSolderPasteProps>\nexpectTypesMatch<InferredCircleSolderPasteProps, CircleSolderPasteProps>(true)\n\nexport const solderPasteProps = z.union([\n  circleSolderPasteProps,\n  rectSolderPasteProps,\n])\n\nexport type InferredSolderPasteProps = z.input<typeof solderPasteProps>\nexpectTypesMatch<InferredSolderPasteProps, SolderPasteProps>(true)\n","import { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface HoleProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  name?: string\n  diameter?: Distance\n  radius?: Distance\n}\n\nexport const holeProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    name: z.string().optional(),\n    diameter: distance.optional(),\n    radius: distance.optional(),\n  })\n  .transform((d) => ({\n    ...d,\n    diameter: d.diameter ?? 2 * d.radius!,\n    radius: d.radius ?? d.diameter! / 2,\n  }))\n\nexport type InferredHoleProps = z.input<typeof holeProps>\n\nexpectTypesMatch<HoleProps, InferredHoleProps>(true)\n","import { distance, route_hint_point } from \"circuit-json\"\nimport { z } from \"zod\"\nimport { point } from \"../common/point\"\n\nexport const portRef = z.union([\n  z.string(),\n  z.custom<{ getPortSelector: () => string }>((v) =>\n    Boolean(v.getPortSelector),\n  ),\n])\n\nconst baseTraceProps = z.object({\n  key: z.string().optional(),\n  thickness: distance.optional(),\n  schematicRouteHints: z.array(point).optional(),\n  pcbRouteHints: z.array(route_hint_point).optional(),\n  schDisplayLabel: z.string().optional(),\n  maxLength: distance.optional(),\n})\n\nexport const traceProps = z.union([\n  baseTraceProps.extend({\n    path: z.array(portRef),\n  }),\n  baseTraceProps.extend({\n    from: portRef,\n    to: portRef,\n  }),\n])\n\nexport type TraceProps = z.input<typeof traceProps>\n","import { type LayerRef, layer_ref } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface FootprintProps {\n  /**\n   * The layer that the footprint is designed for. If you set this to \"top\"\n   * then it means the children were intended to represent the top layer. If\n   * the <chip /> with this footprint is moved to the bottom layer, then the\n   * components will be mirrored.\n   *\n   * Generally, you shouldn't set this except where it can help prevent\n   * confusion because you have a complex multi-layer footprint. Default is\n   * \"top\" and this is most intuitive.\n   */\n  originalLayer?: LayerRef\n}\n\nexport const footprintProps = z.object({\n  originalLayer: layer_ref.default(\"top\").optional(),\n})\n\nexport type FootprintPropsInput = z.input<typeof footprintProps>\ntype InferredFootprintProps = z.infer<typeof footprintProps>\nexpectTypesMatch<InferredFootprintProps, FootprintProps>(true)\n","import { z } from \"zod\"\nimport {\n  commonComponentProps,\n  lrPins,\n  lrPolarPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\n/** @deprecated use battery_capacity from circuit-json when circuit-json is updated */\nconst capacity = z\n  .number()\n  .or(z.string().endsWith(\"mAh\"))\n  .transform((v) => {\n    if (typeof v === \"string\") {\n      const valString = v.replace(\"mAh\", \"\")\n      const num = Number.parseFloat(valString)\n      if (Number.isNaN(num)) {\n        throw new Error(\"Invalid capacity\")\n      }\n      return num\n    }\n    return v\n  })\n  .describe(\"Battery capacity in mAh\")\n\nexport interface BatteryProps extends CommonComponentProps {\n  capacity?: number | string\n}\n\nexport const batteryProps = commonComponentProps.extend({\n  capacity: capacity.optional(),\n})\nexport const batteryPins = lrPolarPins\n\nexpectTypesMatch<BatteryProps, z.input<typeof batteryProps>>(true)\n","import { distance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface PinHeaderProps extends CommonComponentProps {\n  /**\n   * Number of pins in the header\n   */\n  pinCount: number\n\n  /**\n   * Distance between pins\n   */\n  pitch?: number | string\n\n  /**\n   * Schematic facing direction\n   */\n  schFacingDirection?: \"up\" | \"down\" | \"left\" | \"right\"\n\n  /**\n   * Whether the header is male or female\n   */\n  gender?: \"male\" | \"female\"\n\n  /**\n   * Whether to show pin labels in silkscreen\n   */\n  showSilkscreenPinLabels?: boolean\n\n  /**\n   * Whether the header has two rows of pins\n   */\n  doubleRow?: boolean\n\n  /**\n   * Diameter of the through-hole for each pin\n   */\n  holeDiameter?: number | string\n\n  /**\n   * Diameter of the plated area around each hole\n   */\n  platedDiameter?: number | string\n\n  /**\n   * Labels for each pin\n   */\n  pinLabels?: string[]\n\n  /**\n   * Direction the header is facing\n   */\n  facingDirection?: \"left\" | \"right\"\n}\n\nexport const pinHeaderProps = commonComponentProps.extend({\n  pinCount: z.number(),\n  pitch: distance.optional(),\n  schFacingDirection: z.enum([\"up\", \"down\", \"left\", \"right\"]).optional(),\n  gender: z.enum([\"male\", \"female\"]).optional().default(\"male\"),\n  showSilkscreenPinLabels: z.boolean().optional(),\n  doubleRow: z.boolean().optional(),\n  holeDiameter: distance.optional(),\n  platedDiameter: distance.optional(),\n  pinLabels: z.array(z.string()).optional(),\n  facingDirection: z.enum([\"left\", \"right\"]).optional(),\n})\n\ntype InferredPinHeaderProps = z.input<typeof pinHeaderProps>\nexpectTypesMatch<PinHeaderProps, InferredPinHeaderProps>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { distance } from \"lib/common/distance\"\nimport { rotation } from \"circuit-json\"\n\nexport interface NetAliasProps {\n  net?: string\n  schX?: number | string\n  schY?: number | string\n  schRotation?: number | string\n  anchorSide?: \"left\" | \"up\" | \"right\" | \"down\"\n}\n\nexport const netAliasProps = z.object({\n  net: z.string().optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  anchorSide: z.enum([\"left\", \"up\", \"right\", \"down\"]).optional(),\n})\n\ntype InferredNetAliasProps = z.input<typeof netAliasProps>\nexpectTypesMatch<NetAliasProps, InferredNetAliasProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport { chipProps, type ChipProps, type PinLabelsProp } from \"./chip\"\n\nexport type PushButtonProps<T extends PinLabelsProp | string = string> =\n  ChipProps<T>\n\nexport const pushButtonProps = chipProps.extend({})\n\nexpectTypesMatch<PushButtonProps, z.input<typeof pushButtonProps>>(true)\n","import type { SubcircuitGroupProps } from \"./group\"\nimport { subcircuitGroupProps } from \"./group\"\nimport type { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type SubcircuitProps = SubcircuitGroupProps\n\nexport const subcircuitProps = subcircuitGroupProps\n\ntype InferredSubcircuitProps = z.input<typeof subcircuitProps>\nexpectTypesMatch<SubcircuitProps, InferredSubcircuitProps>(true)\n","import {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface TransistorProps extends CommonComponentProps {\n  type: \"npn\" | \"pnp\" | \"bjt\" | \"jfet\" | \"mosfet\"\n}\n\nexport const transistorProps = commonComponentProps.extend({\n  type: z.enum([\"npn\", \"pnp\", \"bjt\", \"jfet\", \"mosfet\"]),\n})\n\nexport const transistorPins = [\n  \"pin1\",\n  \"emitter\",\n  \"pin2\",\n  \"collector\",\n  \"pin3\",\n  \"base\",\n] as const\n\ntype InferredTransistorProps = z.input<typeof transistorProps>\nexpectTypesMatch<TransistorProps, InferredTransistorProps>(true)\n","import {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"../common/layout\"\nimport { expectTypesMatch } from \"../typecheck\"\nimport { z } from \"zod\"\n\nexport interface MosfetProps extends CommonComponentProps {\n  channelType: \"n\" | \"p\"\n  mosfetMode: \"enhancement\" | \"depletion\"\n}\n\nexport const mosfetProps = commonComponentProps.extend({\n  channelType: z.enum([\"n\", \"p\"]),\n  mosfetMode: z.enum([\"enhancement\", \"depletion\"]),\n})\n\nexport const mosfetPins = [\n  \"pin1\",\n  \"drain\",\n  \"pin2\",\n  \"source\",\n  \"pin3\",\n  \"gate\",\n] as const\n\ntype InferredMosfetProps = z.input<typeof mosfetProps>\nexpectTypesMatch<MosfetProps, InferredMosfetProps>(true)\n","import { inductance } from \"circuit-json\"\nimport { commonComponentProps, lrPins } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const inductorProps = commonComponentProps.extend({\n  inductance,\n})\nexport const inductorPins = lrPins\nexport type InductorProps = z.input<typeof inductorProps>\n","import {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPolarPins,\n} from \"lib/common/layout\"\nimport { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nconst diodeConnectionKeys = z.enum([\n  \"anode\",\n  \"cathode\",\n  \"pin1\",\n  \"pin2\",\n  \"pos\",\n  \"neg\",\n])\n\nconst connectionTarget = z\n  .string()\n  .or(z.array(z.string()).readonly())\n  .or(z.array(z.string()))\n\nconst connectionsProp = z.record(diodeConnectionKeys, connectionTarget)\n\nexport const diodeProps = commonComponentProps.extend({\n  connections: connectionsProp.optional(),\n})\n\nexport const diodePins = lrPolarPins\n\nexport interface DiodeProps extends CommonComponentProps {\n  connections?: {\n    anode?: string | string[] | readonly string[]\n    cathode?: string | string[] | readonly string[]\n    pin1?: string | string[] | readonly string[]\n    pin2?: string | string[] | readonly string[]\n    pos?: string | string[] | readonly string[]\n    neg?: string | string[] | readonly string[]\n  }\n}\n\nexport type InferredDiodeProps = z.input<typeof diodeProps>\nexpectTypesMatch<InferredDiodeProps, DiodeProps>(true)\n","import { commonComponentProps, lrPolarPins } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const ledProps = commonComponentProps.extend({\n  color: z.string().optional(),\n})\nexport const ledPins = lrPolarPins\nexport type LedProps = z.input<typeof ledProps>\n","import {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nimport { z } from \"zod\"\n\nexport interface SwitchProps extends CommonComponentProps {\n  type?: \"spst\" | \"spdt\" | \"dpst\" | \"dpdt\"\n  isNormallyClosed?: boolean\n  spdt?: boolean\n  spst?: boolean\n  dpst?: boolean\n  dpdt?: boolean\n}\n\nexport const switchProps = commonComponentProps\n  .extend({\n    type: z.enum([\"spst\", \"spdt\", \"dpst\", \"dpdt\"]).optional(),\n    isNormallyClosed: z.boolean().optional().default(false),\n    spst: z.boolean().optional(),\n    spdt: z.boolean().optional(),\n    dpst: z.boolean().optional(),\n    dpdt: z.boolean().optional(),\n  })\n  .transform((props) => {\n    const updatedProps: SwitchProps = { ...props }\n\n    if (updatedProps.dpdt) {\n      updatedProps.type = \"dpdt\"\n    } else if (updatedProps.spst) {\n      updatedProps.type = \"spst\"\n    } else if (updatedProps.spdt) {\n      updatedProps.type = \"spdt\"\n    } else if (updatedProps.dpst) {\n      updatedProps.type = \"dpst\"\n    }\n\n    switch (updatedProps.type) {\n      case \"spdt\":\n        updatedProps.spdt = true\n        break\n      case \"spst\":\n        updatedProps.spst = true\n        break\n      case \"dpst\":\n        updatedProps.dpst = true\n        break\n      case \"dpdt\":\n        updatedProps.dpdt = true\n        break\n    }\n\n    return updatedProps\n  })\n\nexport type InferredSwitchProps = z.infer<typeof switchProps>\nexpectTypesMatch<SwitchProps, InferredSwitchProps>(true)\n","import { length } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const fabricationNoteTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n  color: z.string().optional(),\n})\nexport type FabricationNoteTextProps = z.input<typeof fabricationNoteTextProps>\n","import { length, route_hint_point } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const fabricationNotePathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n    color: z.string().optional(),\n  })\nexport type FabricationNotePathProps = z.input<typeof fabricationNotePathProps>\n","import { distance, route_hint_point } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const pcbTraceProps = z.object({\n  layer: z.string().optional(),\n  thickness: distance.optional(),\n  route: z.array(route_hint_point),\n})\nexport type PcbTraceProps = z.input<typeof pcbTraceProps>\n","import { distance, layer_ref } from \"circuit-json\"\nimport { commonLayoutProps } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const viaProps = commonLayoutProps.extend({\n  fromLayer: layer_ref,\n  toLayer: layer_ref,\n  holeDiameter: distance,\n  outerDiameter: distance,\n})\nexport type ViaProps = z.input<typeof viaProps>\n","import { distance } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const pcbKeepoutProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true }).extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  }),\n  pcbLayoutProps.extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  }),\n])\nexport type PcbKeepoutProps = z.input<typeof pcbKeepoutProps>\n","import { voltage } from \"circuit-json\"\nimport { commonComponentProps } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const powerSourceProps = commonComponentProps.extend({\n  voltage,\n})\nexport type PowerSourceProps = z.input<typeof powerSourceProps>\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const schematicBoxProps = z.object({\n  schX: distance,\n  schY: distance,\n  width: distance,\n  height: distance,\n})\nexport type SchematicBoxProps = z.input<typeof schematicBoxProps>\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const schematicLineProps = z.object({\n  x1: distance,\n  y1: distance,\n  x2: distance,\n  y2: distance,\n})\nexport type SchematicLineProps = z.input<typeof schematicLineProps>\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const schematicTextProps = z.object({\n  schX: distance,\n  schY: distance,\n  text: z.string(),\n})\nexport type SchematicTextProps = z.input<typeof schematicTextProps>\n","import { point } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const schematicPathProps = z.object({\n  points: z.array(point),\n  isFilled: z.boolean().optional().default(false),\n  fillColor: z.enum([\"red\", \"blue\"]).optional(),\n})\nexport type SchematicPathProps = z.input<typeof schematicPathProps>\n","import { length } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const silkscreenTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n})\nexport type SilkscreenTextProps = z.input<typeof silkscreenTextProps>\n","import { length, route_hint_point } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const silkscreenPathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n  })\nexport type SilkscreenPathProps = z.input<typeof silkscreenPathProps>\n","import { distance } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const silkscreenLineProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    strokeWidth: distance,\n    x1: distance,\n    y1: distance,\n    x2: distance,\n    y2: distance,\n  })\nexport type SilkscreenLineProps = z.input<typeof silkscreenLineProps>\n","import { distance } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const silkscreenRectProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    width: distance,\n    height: distance,\n  })\nexport type SilkscreenRectProps = z.input<typeof silkscreenRectProps>\n","import { distance } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const silkscreenCircleProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    radius: distance,\n  })\nexport type SilkscreenCircleProps = z.input<typeof silkscreenCircleProps>\n","import { distance, layer_ref, route_hint_point } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const routeHintPointProps = z.object({\n  x: distance,\n  y: distance,\n  via: z.boolean().optional(),\n  toLayer: layer_ref.optional(),\n})\n\nexport const traceHintProps = z.object({\n  for: z\n    .string()\n    .optional()\n    .describe(\n      \"Selector for the port you're targeting, not required if you're inside a trace\",\n    ),\n  order: z.number().optional(),\n  offset: route_hint_point.or(routeHintPointProps).optional(),\n  offsets: z\n    .array(route_hint_point)\n    .or(z.array(routeHintPointProps))\n    .optional(),\n  traceWidth: z.number().optional(),\n})\n\nexport type TraceHintProps = z.input<typeof traceHintProps>\n","import { direction } from \"lib/common/direction\"\nimport { commonLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const portProps = commonLayoutProps.extend({\n  name: z.string(),\n  pinNumber: z.number().optional(),\n  aliases: z.array(z.string()).optional(),\n  direction: direction,\n})\nexport type PortProps = z.input<typeof portProps>\n","import {\n  autorouterProp,\n  type AutorouterProp,\n  type PartsEngine,\n  partsEngine,\n} from \"./components/group\"\nimport { expectTypesMatch } from \"./typecheck\"\nimport { z } from \"zod\"\n\nexport interface PlatformConfig {\n  partsEngine?: PartsEngine\n\n  autorouter?: AutorouterProp\n\n  registryApiUrl?: string\n\n  cloudAutorouterUrl?: string\n}\n\nexport const platformConfig = z.object({\n  partsEngine: partsEngine.optional(),\n  autorouter: autorouterProp.optional(),\n  registryApiUrl: z.string().optional(),\n  cloudAutorouterUrl: z.string().optional(),\n})\n\nexpectTypesMatch<PlatformConfig, z.infer<typeof platformConfig>>(true)\n"],"mappings":";AAYO,IAAM,mBAAmB,CAO9B,aAOS;AAAC;AAIZ,iBAQE,eAAe;AAEjB,iBAQE,iBAAiB;AAEnB,iBAOE,IAAI;AAEN,iBAOE,iCAAiC;;;ACjEnC,SAAS,SAAS;AACX,IAAM,YAAY,EAAE,KAAK,CAAC,MAAM,QAAQ,QAAQ,OAAO,CAAC;AASxD,IAAM,qBAAqB,EAAE,KAAK;AAAA,EACvC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAuD,IAAI;AAC3D,iBAAyE,IAAI;;;ACnB7E,SAAS,KAAAA,UAAS;AAGX,IAAM,YAAYC,GAAE,MAAMA,GAAE,OAAO,EAAE,GAAGA,GAAE,OAAO,CAAC,CAAC;AAG1D,iBAAuD,IAAI;;;ACN3D;AAAA,EAEE,YAAAC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,OACK;AAEP,SAAS,KAAAC,UAAS;;;ACRlB,SAAS,KAAAC,UAAS;;;ACAlB,SAAS,gBAAgB;AACzB,SAAS,KAAAC,UAAS;AAEX,IAAM,SAASA,GAAE,OAAO;AAAA,EAC7B,GAAG;AAAA,EACH,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ADHM,IAAM,iBAAiBC,GAAE,OAAO;AAAA,EACrC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AACrC,CAAC;AAcM,IAAM,eAAeA,GAAE,OAAO;AAAA,EACnC,gBAAgBA,GAAE,OAAO,EAAE,GAAG,cAAc,EAAE,SAAS;AAAA,EACvD,gBAAgB,OAAO,SAAS;AAAA,EAChC,MAAM,OAAO,SAAS;AACxB,CAAC;AAED,iBAA6D,IAAI;AAK1D,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQA,GAAE,OAAO;AACnB,CAAC;AAMM,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQA,GAAE,OAAO;AAAA,EACjB,QAAQA,GAAE,OAAO,EAAE,SAAS;AAC9B,CAAC;AAKM,IAAM,gBAAgB,aAAa,OAAO;AAAA,EAC/C,OAAOA,GAAE,OAAOA,GAAE,IAAI,CAAC;AACzB,CAAC;AAIM,IAAM,eAAeA,GAAE,MAAM;AAAA,EAClCA,GAAE,OAAO;AAAA,EACT;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAqD,IAAI;;;AE7DzD,SAAS,KAAAC,UAAS;AAoBX,IAAM,gBAAgBA,GAAE,OAAkB,CAAC,MAAM,IAAI;;;AHUrD,IAAM,iBAAiBC,GAAE,OAAO;AAAA,EACrC,MAAMC,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,OAAO,UAAU,SAAS;AAC5B,CAAC;AAED,iBAAyD,IAAI;AAEtD,IAAM,oBAAoBD,GAAE,OAAO;AAAA,EACxC,MAAMC,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,MAAMA,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,OAAO,UAAU,SAAS;AAAA,EAC1B,WAAW,cAAc,SAAS;AACpC,CAAC;AAGD,iBAA+D,IAAI;AAa5D,IAAM,gBAAgBD,GAAE,OAAO;AAAA,EACpC,qBAAqBA,GAAE,OAAO,eAAeA,GAAE,MAAMA,GAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAC7E,CAAC;AAED,iBAA+D,IAAI;AAW5D,IAAM,uBAAuB,kBACjC,MAAM,aAAa,EACnB,OAAO;AAAA,EACN,KAAKA,GAAE,IAAI,EAAE,SAAS;AAAA,EACtB,MAAMA,GAAE,OAAO;AAAA,EACf,UAAU,aAAa,SAAS;AAAA,EAChC,UAAUA,GAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,YAAYA,GAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAGH,iBAAqE,IAAI;AAElE,IAAM,iBAAiB;AAGvB,IAAM,SAAS,CAAC,QAAQ,QAAQ,QAAQ,OAAO;AAC/C,IAAM,cAAc;AAAA,EACzB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAEO,IAAM,uBAAuBC,UAAS,GAAGD,GAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;;;AI5G1E,SAAS,KAAAE,UAAS;AAiDX,IAAM,4BAA4BA,GAAE,OAAO;AAAA,EAChD,MAAMA,GAAE,MAAMA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC,CAAC;AAAA,EAC/C,WAAWA,GAAE,MAAM;AAAA,IACjBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,EAC3B,CAAC;AACH,CAAC;AAKM,IAAM,2BAA2BA,GAAE,OAAO;AAAA,EAC/C,UAAUA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,+BAA+B;AAAA,EACxE,SAASA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,8BAA8B;AAAA,EACtE,WAAWA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,gCAAgC;AAAA,EAC1E,YAAYA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,iCAAiC;AAAA,EAC5E,cAAcA,GAAE,OAAO,EAAE,SAAS;AAAA,EAClC,eAAeA,GAAE,OAAO,EAAE,SAAS;AAAA,EACnC,aAAaA,GAAE,OAAO,EAAE,SAAS;AAAA,EACjC,gBAAgBA,GAAE,OAAO,EAAE,SAAS;AAAA,EACpC,UAAU,0BAA0B,SAAS;AAAA,EAC7C,WAAW,0BAA0B,SAAS;AAAA,EAC9C,SAAS,0BAA0B,SAAS;AAAA,EAC5C,YAAY,0BAA0B,SAAS;AACjD,CAAC;AAEM,IAAM,0BAA0B;AAEvC,iBAGE,IAAI;;;ACnFN,SAAS,YAAAC,iBAAgB;AAEzB,SAAS,KAAAC,UAAS;AAqBX,IAAM,oBAAoBA,GAAE;AAAA,EACjCA,GAAE,OAAO;AAAA,IACP,YAAYC,UAAS,SAAS;AAAA,IAC9B,aAAaA,UAAS,SAAS;AAAA,IAC/B,WAAWA,UAAS,SAAS;AAAA,IAC7B,cAAcA,UAAS,SAAS;AAAA,IAEhC,YAAYA,UAAS,SAAS;AAAA,IAC9B,aAAaA,UAAS,SAAS;AAAA,IAC/B,WAAWA,UAAS,SAAS;AAAA,IAC7B,cAAcA,UAAS,SAAS;AAAA,EAClC,CAAC;AACH;AAEA,iBAAuE,IAAI;;;ACpC3E,SAAS,YAAAC,iBAAgB;;;ACDzB,SAAS,YAAAC,iBAAgB;AACzB,SAAS,KAAAC,UAAS;AAEX,IAAM,QAAQA,GAAE,OAAO;AAAA,EAC5B,GAAGD;AAAA,EACH,GAAGA;AACL,CAAC;;;ADDD,SAAS,KAAAE,WAAS;;;AEJlB,SAAoB,cAAc;AAQlC,SAAS,KAAAC,WAAS;;;ACRlB,SAAS,KAAAC,WAAS;AAEX,IAAM,yBAAyBA,IAAE,OAAO;AAAA,EAC7C,eAAeA,IAAE,OAAO;AAAA,EACxB,aAAaA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAClC,YAAYA,IAAE,OAAO;AACvB,CAAC;AAUD;AAAA,EACE;AACF;;;ACnBA,SAAS,KAAAC,WAAS;AAOX,IAAM,oCAAoC,uBAAuB,OAAO;AAAA,EAC7E,qBAAqBC,IAClB,QAAQ,yBAAyB,EACjC,SAAS,YAAY;AAAA,EACxB,iBAAiBA,IAAE,QAAQ,6BAA6B;AAAA,EACxD,kBAAkBA,IAAE,OAAO;AAAA,EAC3B,iBAAiBA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AAAA,EAC1D,YAAYA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AACvD,CAAC;AAGM,IAAM,gCAAgC;AAe7C,iBAGE,IAAI;;;ACpCN,SAAS,KAAAC,WAAS;AAMlB,OAAiC;AAE1B,IAAM,wBAAwB,uBAAuB,OAAO;AAAA,EACjE,qBAAqBC,IAAE,QAAQ,iBAAiB,EAAE,SAAS,YAAY;AAAA,EACvE,iBAAiBA,IAAE,QAAQ,qBAAqB,EAAE,SAAS;AAAA,EAC3D,aAAaA,IAAE,OAAO;AAAA,EACtB,mBAAmBA,IAAE,OAAO,EAAE,SAAS;AAAA,EACvC,OAAOA,IAAE;AAAA,IACPA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,GAAG,KAAKA,IAAE,QAAQ,EAAE,SAAS,EAAE,CAAC;AAAA,EACxE;AACF,CAAC;AAaD;AAAA,EACE;AACF;;;AC/BA,SAAS,KAAAC,WAAS;AAOX,IAAM,0CACX,uBAAuB,OAAO;AAAA,EAC5B,iBAAiBC,IAAE,QAAQ,mCAAmC;AAAA,EAC9D,wBAAwBA,IAAE,OAAO;AAAA,EACjC,iBAAiBA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AAAA,EAC1D,YAAYA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AACvD,CAAC;AAcH,iBAGE,IAAI;;;AC9BN,SAAS,KAAAC,WAAS;AAoBX,IAAM,oBAAoBC,IAAE,MAAM;AAAA,EACvC;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAKD,iBAA2D,IAAI;;;AC7B/D,SAAS,KAAAC,WAAS;;;ACAlB,SAAS,KAAAC,WAAS;AAClB,SAAS,SAAAC,cAAyB;AAG3B,IAAM,uBAAuBC,IAAE,OAAO;AAAA,EAC3C,UAAUA,IAAE,OAAO;AAAA,EACnB,aAAaA,IACV,OAAO,EACP,SAAS,EACT,QAAQ,cAAc,EACtB,SAAS,qCAAqC;AAAA,EACjD,QAAQC;AACV,CAAC;AAWD,iBAAiE,IAAI;;;ACvBrE,SAAS,KAAAC,WAAS;AAClB,SAAoB,oBAAAC,yBAA6C;AAG1D,IAAM,oBAAoBC,IAAE,OAAO;AAAA,EACxC,mBAAmBA,IAAE,OAAO;AAAA,EAC5B,SAASA,IAAE,MAAMC,iBAAgB;AACnC,CAAC;AASD,iBAAqE,IAAI;;;AChBzE,SAAS,KAAAC,WAAS;AAClB,SAAS,SAAAC,cAAyB;AAG3B,IAAM,6BAA6BC,IAAE,OAAO;AAAA,EACjD,UAAUA,IAAE,OAAO;AAAA,EACnB,aAAaA,IACV,OAAO,EACP,SAAS,EACT,QAAQ,cAAc,EACtB,SAAS,qCAAqC;AAAA,EACjD,QAAQC;AACV,CAAC;AAeD;AAAA,EACE;AACF;;;AHhBO,IAAM,oBAAoBC,IAAE,OAAO;AAAA,EACxC,gBAAgBA,IAAE,MAAM,oBAAoB,EAAE,SAAS;AAAA,EACvD,oBAAoBA,IAAE,MAAM,iBAAiB,EAAE,SAAS;AAAA,EACxD,sBAAsBA,IAAE,MAAM,0BAA0B,EAAE,SAAS;AACrE,CAAC;AAUD,iBAAqE,IAAI;;;ANVlE,IAAM,eAAeC,IAAE,OAAO;AAAA,EACnC,YAAYA,IAAE,KAAK,CAAC,QAAQ,QAAQ,MAAM,CAAC,EAAE,SAAS;AAAA,EACtD,UAAUA,IAAE,KAAK,CAAC,YAAY,UAAU,CAAC,EAAE,SAAS;AAAA,EAEpD,MAAMA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC3B,UAAUA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EAC7C,UAAUA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EAC7C,kBAAkBA,IAAE,OAAO,EAAE,SAAS;AAAA,EACtC,qBAAqBA,IAAE,OAAO,EAAE,SAAS;AAAA,EACzC,cAAcA,IAAE,OAAO,EAAE,SAAS;AAAA,EAClC,SAASA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EAE5C,MAAMA,IAAE,QAAQ,EAAE,GAAGA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EAC1C,eAAeA,IAAE,KAAK,CAAC,OAAO,QAAQ,CAAC,EAAE,SAAS;AAAA,EAClD,YAAYA,IAAE,KAAK,CAAC,SAAS,UAAU,OAAO,SAAS,CAAC,EAAE,SAAS;AAAA,EACnE,gBAAgBA,IAAE,KAAK,CAAC,SAAS,UAAU,OAAO,SAAS,CAAC,EAAE,SAAS;AAAA,EACvE,SAASA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC9B,YAAYA,IAAE,QAAQ,EAAE,SAAS;AAAA,EACjC,KAAKA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC,EAAE,SAAS;AAC1C,CAAC;AAuBD,iBAA6D,IAAI;AA+C1D,IAAM,mBAAmBA,IAAE,OAAO;AAAA,EACvC,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,aAAaA,IAAE,KAAK,CAAC,cAAc,cAAc,CAAC,EAAE,SAAS;AAAA,EAC7D,YAAYA,IAAE,KAAK,CAAC,OAAO,gBAAgB,CAAC,EAAE,SAAS;AAAA,EACvD,oBAAoBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EACzC,OAAOA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EACrD,WAAWA,IAAE,KAAK,CAAC,oBAAoB,YAAY,CAAC,EAAE,SAAS;AAAA,EAC/D,aAAaA,IACV;AAAA,IACC,CAAC,MAAM,OAAO,MAAM,cAAc,MAAM;AAAA,EAC1C,EACC,SAAS;AAAA,EACZ,OAAOA,IAAE,QAAQ,EAAE,SAAS;AAC9B,CAAC;AAEM,IAAM,iBAAiBA,IAAE,MAAM;AAAA,EACpC;AAAA,EACAA,IAAE,QAAQ,kBAAkB;AAAA,EAC5BA,IAAE,QAAQ,YAAY;AAAA,EACtBA,IAAE,QAAQ,MAAM;AAAA,EAChBA,IAAE,QAAQ,YAAY;AAAA,EACtBA,IAAE,QAAQ,YAAY;AACxB,CAAC;AAqCM,IAAM,iBAAiB,kBAAkB,OAAO;AAAA,EACrD,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAUA,IAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,KAAKA,IAAE,IAAI,EAAE,SAAS;AAAA,EAEtB,GAAG,aAAa;AAAA,EAChB,UAAU,OAAO,SAAS;AAAA,EAC1B,WAAW,OAAO,SAAS;AAAA,EAC3B,UAAU,OAAO,SAAS;AAAA,EAC1B,WAAW,OAAO,SAAS;AAAA,EAC3B,WAAW,aAAa,SAAS;AAAA,EACjC,WAAW,aAAa,SAAS;AACnC,CAAC;AAEM,IAAM,cAAcA,IAAE,OAAoB,CAAC,MAAM,cAAc,CAAC;AAEhE,IAAM,uBAAuB,eAAe,OAAO;AAAA,EACxD,QAAQA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EACtD,aAAa,kBAAkB,SAAS;AAAA,EACxC,sBAAsBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC3C,0BAA0BA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC/C,iBAAiBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EACtC,mBAAmB,OAAO,SAAS;AAAA,EACnC,eAAe,OAAO,SAAS;AAAA,EAC/B,aAAa,YAAY,SAAS;AAAA,EAClC,eAAeA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EAC7D,YAAY,eAAe,SAAS;AACtC,CAAC;AAEM,IAAM,+BAA+B,qBAAqB,OAAO;AAAA,EACtE,YAAYA,IAAE,QAAQ,IAAI;AAC5B,CAAC;AAEM,IAAM,aAAaA,IAAE,mBAAmB,cAAc;AAAA,EAC3D,eAAe,OAAO,EAAE,YAAYA,IAAE,QAAQ,KAAK,EAAE,SAAS,EAAE,CAAC;AAAA,EACjE;AACF,CAAC;AAOD,iBAAyD,IAAI;AAC7D,iBAGE,IAAI;AAGN,iBAAiD,IAAI;;;AFvM9C,IAAM,aAAa,qBAAqB,OAAO;AAAA,EACpD,OAAOC,UAAS,SAAS;AAAA,EACzB,QAAQA,UAAS,SAAS;AAAA,EAC1B,SAASC,IAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EACjC,gBAAgBD,UAAS,SAAS;AAAA,EAClC,gBAAgBA,UAAS,SAAS;AACpC,CAAC;AAGD,iBAAiD,IAAI;;;AYzBrD,SAAS,YAAAE,iBAAgB;AAezB,SAAS,KAAAC,WAAS;AAkFlB,IAAM,mBAAmBA,IACtB,OAAO,EACP,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS,CAAC,EACjC,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC;AAEzB,IAAM,kBAAkBA,IACrB,OAAoB,EACpB,KAAKA,IAAE,OAAOA,IAAE,OAAO,GAAG,gBAAgB,CAAC;AAEvC,IAAM,gBAAgBA,IAAE;AAAA,EAC7BA,IAAE,OAAO;AAAA,EACTA,IAAE,OAAO,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS,CAAC,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC;AACtE;AAEA,iBAA+D,IAAI;AAE5D,IAAM,YAAY,qBAAqB,OAAO;AAAA,EACnD,wBAAwBA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAW,cAAc,SAAS;AAAA,EAClC,yBAAyBA,IAAE,MAAMA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAAA,EAC/D,yBAAyBA,IAAE,MAAMA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAAA,EAC/D,mBAAmB,yBAAwB,SAAS;AAAA,EACpD,oBAAoB,yBAAwB,SAAS;AAAA,EACrD,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAeC,UAAS,SAAS;AAAA,EACjC,UAAUA,UAAS,SAAS;AAAA,EAC5B,WAAWA,UAAS,SAAS;AAAA,EAC7B,2BAA2BD,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChD,aAAa,gBAAgB,SAAS;AACxC,CAAC;AAKM,IAAM,WAAW;AAKxB,iBAAyD,IAAI;;;ACxI7D,SAAS,YAAAE,iBAAgB;AAczB,SAAS,KAAAC,WAAS;AAaX,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,wBAAwBA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAWA,IACR,OAAOA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC,GAAGA,IAAE,OAAO,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC,CAAC,EACpE,SAAS;AAAA,EACZ,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAeC,UAAS,SAAS;AAAA,EACjC,UAAUA,UAAS,SAAS;AAAA,EAC5B,WAAWA,UAAS,SAAS;AAAA,EAC7B,cAAcD,IAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AAAA,EACjD,oBAAoB,yBAAyB,SAAS;AACxD,CAAC;AAGD,iBAAmD,IAAI;;;ACzCvD,SAAS,YAAAE,iBAAgB;AAKzB,SAAS,KAAAC,WAAS;AAmDX,IAAM,kBAAkBA,IAAE,MAAM;AAAA,EACrC,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,QAAQ;AAAA,IACzB,cAAcC;AAAA,IACd,eAAeA;AAAA,IACf,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMD,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,MAAM;AAAA,IACvB,YAAYC;AAAA,IACZ,aAAaA;AAAA,IACb,WAAWA;AAAA,IACX,YAAYA;AAAA,IACZ,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMD,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,MAAM;AAAA,IACvB,YAAYC;AAAA,IACZ,aAAaA;AAAA,IACb,WAAWA;AAAA,IACX,YAAYA;AAAA,IACZ,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eACG,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EACvC,OAAO;AAAA,IACN,MAAMD,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,cAAcC;AAAA,IACd,cAAcA;AAAA,IACd,eAAeA;AAAA,IACf,WAAWD,IAAE,QAAQ,QAAQ,EAAE,SAAS;AAAA,IACxC,UAAUA,IAAE,QAAQ,MAAM,EAAE,SAAS;AAAA,IACrC,OAAOA,IAAE,QAAQ,yBAAyB,EAAE,SAAS;AAAA,IACrD,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC,EACA;AAAA,IACC,CAAC,SAAS;AACR,aAAO,KAAK,UAAU,4BAClB,KAAK,gBAAgB,KAAK,gBAAgB,KAAK,gBAC/C;AAAA,IACN;AAAA,IACA;AAAA,MACE,SAAS;AAAA,IACX;AAAA,EACF;AACJ,CAAC;AAID,iBAA2D,IAAI;;;AC5G/D,SAAS,kBAAkB;AAO3B,SAAS,KAAAE,WAAS;AAUX,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AAAA,EAEA,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAUA,IAAE,OAAO,EAAE,SAAS;AAAA,EAE9B,aAAaA,IAAE,OAAO,EAAE,SAAS;AAAA,EACjC,YAAYA,IAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AACM,IAAM,eAAe;AAG5B,iBAAuD,IAAI;;;AC7B3D,SAAS,cAAAC,mBAAkB;AAO3B,SAAS,KAAAC,WAAS;AASX,IAAM,qBAAqB,qBAAqB,OAAO;AAAA,EAC5D,eAAeC;AAAA,EACf,YAAYD,IAAE,KAAK,CAAC,WAAW,WAAW,CAAC,EAAE,SAAS;AACxD,CAAC;AAGD,iBAAiE,IAAI;;;ACtBrE,SAAS,WAAW,mBAAmB;AAOvC,SAAS,KAAAE,WAAS;AAUX,IAAM,eAAe,qBAAqB,OAAO;AAAA,EACtD;AAAA,EACA,iBAAiB;AAAA,EACjB,YAAYA,IAAE,KAAK,CAAC,WAAW,UAAU,CAAC,EAAE,SAAS;AACvD,CAAC;AACM,IAAM,cAAc;AAG3B,iBAAqD,IAAI;;;ACzBzD,SAAS,aAAAC,YAAW,eAAAC,oBAAmB;AAMvC,SAAS,KAAAC,WAAS;AAUX,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD,WAAWC;AAAA,EACX,iBAAiBC;AAAA,EACjB,YAAYF,IAAE,KAAK,CAAC,aAAa,cAAc,iBAAiB,CAAC,EAAE,SAAS;AAC9E,CAAC;AAGD,iBAAyD,IAAI;;;ACvB7D,SAAS,YAAAG,iBAAgB;AACzB,SAAS,KAAAC,WAAS;AAiBX,IAAM,kBAAkB,WAAW,OAAO;AAAA,EAC/C,cAAcC,IAAE,OAAO,EAAE,SAAS;AAAA,EAClC,eAAeA,IAAE,OAAO,EAAE,SAAS;AAAA,EACnC,aAAaA,IAAE,OAAO,EAAE,SAAS;AAAA,EACjC,gBAAgBA,IAAE,OAAO,EAAE,SAAS;AAAA,EACpC,UAAUA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACvC,WAAWA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACxC,SAASA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACtC,YAAYA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACzC,UAAUC,UAAS,SAAS;AAAA,EAC5B,YAAYD,IAAE,QAAQ,EAAE,SAAS;AACnC,CAAC;AAGD,iBAA2D,IAAI;;;AChC/D,SAAS,eAAAE,cAAa,eAAe;AAOrC,SAAS,KAAAC,WAAS;AAcX,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD,aAAAC;AAAA,EACA,kBAAkB,QAAQ,SAAS;AAAA,EACnC,gBAAgBD,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EACpD,WAAWA,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAC/C,eAAeA,IAAE,OAAO,EAAE,SAAS;AAAA,EACnC,cAAcA,IAAE,OAAO,EAAE,SAAS;AAAA,EAClC,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAUA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC9B,0BAA0BA,IAAE,OAAO,EAAE,SAAS;AAChD,CAAC;AACM,IAAM,gBAAgB;AAE7B,iBAAiE,IAAI;;;AClCrE,SAAS,KAAAE,WAAS;AAOX,IAAM,WAAWC,IAAE,OAAO;AAAA,EAC/B,MAAMA,IAAE,OAAO;AACjB,CAAC;AAGD,iBAA6C,IAAI;;;ACXjD,SAAS,KAAAC,WAAS;AAQX,IAAM,yBAAyBA,IAAE,OAAO;AAAA,EAC7C,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,SAASA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC9B,SAASA,IAAE,QAAQ,EAAE,SAAS;AAChC,CAAC;AAMD,iBAAyE,IAAI;;;ACnB7E,OAAkB;AAIlB,SAAS,YAAAC,YAAU,UAAAC,eAAc;;;ACDjC,SAAS,KAAAC,WAAS;AAkFX,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOC;AAAA,EACP,MAAMD,IAAE,OAAO;AAAA,EACf,OAAOA,IAAE,OAAO;AAAA,EAEhB,YAAYA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgBA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOC;AAAA,EACP,KAAKD,IAAE,OAAO;AAAA,EACd,QAAQA,IAAE,OAAO;AAAA,EAEjB,YAAYA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgBA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAKA,IAAE,MAAMA,IAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAKA,IAAE,MAAMA,IAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,kBAAkBA,IAAE,MAAM;AAAA,EACrC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAmE,IAAI;;;ACnIvE,SAAS,KAAAE,WAAS;AA6CX,IAAM,kBAAkB,eAC5B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOC,IAAE,QAAQ,MAAM;AAAA,EACvB,OAAOC;AAAA,EACP,QAAQA;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA2D,IAAI;AAExD,IAAM,yBAAyB,eACnC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOD,IAAE,QAAQ,cAAc;AAAA,EAC/B,OAAOC;AAAA,EACP,QAAQA;AAAA,EACR,aAAaD,IAAE,OAAO;AAAA,EACtB,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAAyE,IAAI;AAEtE,IAAM,oBAAoB,eAC9B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOA,IAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQC;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA+D,IAAI;AAE5D,IAAM,kBAAkB,eAC5B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOD,IAAE,QAAQ,MAAM;AAAA,EACvB,OAAOC;AAAA,EACP,QAAQA;AAAA,EACR,QAAQA;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA2D,IAAI;AAExD,IAAM,cAAcD,IAAE,MAAM;AAAA,EACjC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAmD,IAAI;;;ACrGvD,SAA0B,KAAAE,WAAS;AAoB5B,IAAM,uBAAuB,eACjC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOC,IAAE,QAAQ,MAAM;AAAA,EACvB,OAAOC;AAAA,EACP,QAAQA;AACV,CAAC;AAEH,iBAAqE,IAAI;AAElE,IAAM,yBAAyB,eACnC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOD,IAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQC;AACV,CAAC;AAEH,iBAAyE,IAAI;AAEtE,IAAM,mBAAmBD,IAAE,MAAM;AAAA,EACtC;AAAA,EACA;AACF,CAAC;AAGD,iBAA6D,IAAI;;;AC/CjE,SAAS,KAAAE,WAAS;AAWX,IAAM,YAAY,eACtB,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,MAAMC,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAUC,WAAS,SAAS;AAAA,EAC5B,QAAQA,WAAS,SAAS;AAC5B,CAAC,EACA,UAAU,CAAC,OAAO;AAAA,EACjB,GAAG;AAAA,EACH,UAAU,EAAE,YAAY,IAAI,EAAE;AAAA,EAC9B,QAAQ,EAAE,UAAU,EAAE,WAAY;AACpC,EAAE;AAIJ,iBAA+C,IAAI;;;AC1BnD,SAAS,YAAAC,YAAU,oBAAAC,yBAAwB;AAC3C,SAAS,KAAAC,WAAS;AAGX,IAAM,UAAUC,IAAE,MAAM;AAAA,EAC7BA,IAAE,OAAO;AAAA,EACTA,IAAE;AAAA,IAA0C,CAAC,MAC3C,QAAQ,EAAE,eAAe;AAAA,EAC3B;AACF,CAAC;AAED,IAAM,iBAAiBA,IAAE,OAAO;AAAA,EAC9B,KAAKA,IAAE,OAAO,EAAE,SAAS;AAAA,EACzB,WAAWC,WAAS,SAAS;AAAA,EAC7B,qBAAqBD,IAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EAC7C,eAAeA,IAAE,MAAME,iBAAgB,EAAE,SAAS;AAAA,EAClD,iBAAiBF,IAAE,OAAO,EAAE,SAAS;AAAA,EACrC,WAAWC,WAAS,SAAS;AAC/B,CAAC;AAEM,IAAM,aAAaD,IAAE,MAAM;AAAA,EAChC,eAAe,OAAO;AAAA,IACpB,MAAMA,IAAE,MAAM,OAAO;AAAA,EACvB,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,MAAM;AAAA,IACN,IAAI;AAAA,EACN,CAAC;AACH,CAAC;;;AC5BD,SAAwB,aAAAG,kBAAiB;AAEzC,SAAS,KAAAC,WAAS;AAgBX,IAAM,iBAAiBA,IAAE,OAAO;AAAA,EACrC,eAAeC,WAAU,QAAQ,KAAK,EAAE,SAAS;AACnD,CAAC;AAID,iBAAyD,IAAI;;;ACxB7D,SAAS,KAAAC,WAAS;AAUlB,IAAM,WAAWC,IACd,OAAO,EACP,GAAGA,IAAE,OAAO,EAAE,SAAS,KAAK,CAAC,EAC7B,UAAU,CAAC,MAAM;AAChB,MAAI,OAAO,MAAM,UAAU;AACzB,UAAM,YAAY,EAAE,QAAQ,OAAO,EAAE;AACrC,UAAM,MAAM,OAAO,WAAW,SAAS;AACvC,QAAI,OAAO,MAAM,GAAG,GAAG;AACrB,YAAM,IAAI,MAAM,kBAAkB;AAAA,IACpC;AACA,WAAO;AAAA,EACT;AACA,SAAO;AACT,CAAC,EACA,SAAS,yBAAyB;AAM9B,IAAM,eAAe,qBAAqB,OAAO;AAAA,EACtD,UAAU,SAAS,SAAS;AAC9B,CAAC;AACM,IAAM,cAAc;AAE3B,iBAA6D,IAAI;;;ACnCjE,SAAS,YAAAC,kBAAgB;AAMzB,SAAS,KAAAC,WAAS;AAsDX,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD,UAAUA,IAAE,OAAO;AAAA,EACnB,OAAOC,WAAS,SAAS;AAAA,EACzB,oBAAoBD,IAAE,KAAK,CAAC,MAAM,QAAQ,QAAQ,OAAO,CAAC,EAAE,SAAS;AAAA,EACrE,QAAQA,IAAE,KAAK,CAAC,QAAQ,QAAQ,CAAC,EAAE,SAAS,EAAE,QAAQ,MAAM;AAAA,EAC5D,yBAAyBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC9C,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,cAAcC,WAAS,SAAS;AAAA,EAChC,gBAAgBA,WAAS,SAAS;AAAA,EAClC,WAAWD,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACxC,iBAAiBA,IAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AACtD,CAAC;AAGD,iBAAyD,IAAI;;;AC1E7D,SAAS,KAAAE,WAAS;AAGlB,SAAS,YAAAC,iBAAgB;AAUlB,IAAM,gBAAgBC,IAAE,OAAO;AAAA,EACpC,KAAKA,IAAE,OAAO,EAAE,SAAS;AAAA,EACzB,MAAMC,WAAS,SAAS;AAAA,EACxB,MAAMA,WAAS,SAAS;AAAA,EACxB,aAAaF,UAAS,SAAS;AAAA,EAC/B,YAAYC,IAAE,KAAK,CAAC,QAAQ,MAAM,SAAS,MAAM,CAAC,EAAE,SAAS;AAC/D,CAAC;AAGD,iBAAuD,IAAI;;;ACrB3D,OAAkB;AAMX,IAAM,kBAAkB,UAAU,OAAO,CAAC,CAAC;AAElD,iBAAmE,IAAI;;;ACFhE,IAAM,kBAAkB;AAG/B,iBAA2D,IAAI;;;ACL/D,SAAS,KAAAE,WAAS;AAMX,IAAM,kBAAkB,qBAAqB,OAAO;AAAA,EACzD,MAAMA,IAAE,KAAK,CAAC,OAAO,OAAO,OAAO,QAAQ,QAAQ,CAAC;AACtD,CAAC;AAEM,IAAM,iBAAiB;AAAA,EAC5B;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAGA,iBAA2D,IAAI;;;ACpB/D,SAAS,KAAAC,WAAS;AAOX,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,aAAaA,IAAE,KAAK,CAAC,KAAK,GAAG,CAAC;AAAA,EAC9B,YAAYA,IAAE,KAAK,CAAC,eAAe,WAAW,CAAC;AACjD,CAAC;AAEM,IAAM,aAAa;AAAA,EACxB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAGA,iBAAmD,IAAI;;;AC3BvD,SAAS,kBAAkB;AAIpB,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AACF,CAAC;AACM,IAAM,eAAe;;;ACF5B,SAAS,KAAAC,WAAS;AAGlB,IAAM,sBAAsBC,IAAE,KAAK;AAAA,EACjC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,IAAMC,oBAAmBD,IACtB,OAAO,EACP,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS,CAAC,EACjC,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC;AAEzB,IAAME,mBAAkBF,IAAE,OAAO,qBAAqBC,iBAAgB;AAE/D,IAAM,aAAa,qBAAqB,OAAO;AAAA,EACpD,aAAaC,iBAAgB,SAAS;AACxC,CAAC;AAEM,IAAM,YAAY;AAczB,iBAAiD,IAAI;;;ACzCrD,SAAS,KAAAC,WAAS;AAEX,IAAM,WAAW,qBAAqB,OAAO;AAAA,EAClD,OAAOA,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AACM,IAAM,UAAU;;;ACAvB,SAAS,KAAAC,WAAS;AAWX,IAAM,cAAc,qBACxB,OAAO;AAAA,EACN,MAAMA,IAAE,KAAK,CAAC,QAAQ,QAAQ,QAAQ,MAAM,CAAC,EAAE,SAAS;AAAA,EACxD,kBAAkBA,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EACtD,MAAMA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC3B,MAAMA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC3B,MAAMA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC3B,MAAMA,IAAE,QAAQ,EAAE,SAAS;AAC7B,CAAC,EACA,UAAU,CAAC,UAAU;AACpB,QAAM,eAA4B,EAAE,GAAG,MAAM;AAE7C,MAAI,aAAa,MAAM;AACrB,iBAAa,OAAO;AAAA,EACtB,WAAW,aAAa,MAAM;AAC5B,iBAAa,OAAO;AAAA,EACtB,WAAW,aAAa,MAAM;AAC5B,iBAAa,OAAO;AAAA,EACtB,WAAW,aAAa,MAAM;AAC5B,iBAAa,OAAO;AAAA,EACtB;AAEA,UAAQ,aAAa,MAAM;AAAA,IACzB,KAAK;AACH,mBAAa,OAAO;AACpB;AAAA,IACF,KAAK;AACH,mBAAa,OAAO;AACpB;AAAA,IACF,KAAK;AACH,mBAAa,OAAO;AACpB;AAAA,IACF,KAAK;AACH,mBAAa,OAAO;AACpB;AAAA,EACJ;AAEA,SAAO;AACT,CAAC;AAGH,iBAAmD,IAAI;;;AC1DvD,SAAS,UAAAC,eAAc;AAEvB,SAAS,KAAAC,WAAS;AAEX,IAAM,2BAA2B,eAAe,OAAO;AAAA,EAC5D,MAAMA,IAAE,OAAO;AAAA,EACf,iBAAiBA,IACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAMA,IAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAUC,QAAO,SAAS;AAAA,EAC1B,OAAOD,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;;;ACZD,SAAS,UAAAE,SAAQ,oBAAAC,yBAAwB;AAEzC,SAAS,KAAAC,WAAS;AAEX,IAAM,2BAA2B,eACrC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAOA,IAAE,MAAMC,iBAAgB;AAAA,EAC/B,aAAaC,QAAO,SAAS;AAAA,EAC7B,OAAOF,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;;;ACVH,SAAS,YAAAG,YAAU,oBAAAC,yBAAwB;AAC3C,SAAS,KAAAC,WAAS;AAEX,IAAM,gBAAgBA,IAAE,OAAO;AAAA,EACpC,OAAOA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,WAAWF,WAAS,SAAS;AAAA,EAC7B,OAAOE,IAAE,MAAMD,iBAAgB;AACjC,CAAC;;;ACPD,SAAS,YAAAE,YAAU,aAAAC,kBAAiB;AAI7B,IAAM,WAAW,kBAAkB,OAAO;AAAA,EAC/C,WAAWC;AAAA,EACX,SAASA;AAAA,EACT,cAAcC;AAAA,EACd,eAAeA;AACjB,CAAC;;;ACTD,SAAS,YAAAC,kBAAgB;AAEzB,SAAS,KAAAC,WAAS;AAEX,IAAM,kBAAkBA,IAAE,MAAM;AAAA,EACrC,eAAe,KAAK,EAAE,aAAa,KAAK,CAAC,EAAE,OAAO;AAAA,IAChD,OAAOA,IAAE,QAAQ,QAAQ;AAAA,IACzB,QAAQC;AAAA,EACV,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,OAAOD,IAAE,QAAQ,MAAM;AAAA,IACvB,OAAOC;AAAA,IACP,QAAQA;AAAA,EACV,CAAC;AACH,CAAC;;;ACdD,SAAS,WAAAC,gBAAe;AAIjB,IAAM,mBAAmB,qBAAqB,OAAO;AAAA,EAC1D,SAAAC;AACF,CAAC;;;ACND,SAAS,YAAAC,kBAAgB;AACzB,SAAS,KAAAC,WAAS;AAEX,IAAM,oBAAoBA,IAAE,OAAO;AAAA,EACxC,MAAMD;AAAA,EACN,MAAMA;AAAA,EACN,OAAOA;AAAA,EACP,QAAQA;AACV,CAAC;;;ACRD,SAAS,YAAAE,kBAAgB;AACzB,SAAS,KAAAC,WAAS;AAEX,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EACzC,IAAID;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AACN,CAAC;;;ACRD,SAAS,YAAAE,kBAAgB;AACzB,SAAS,KAAAC,WAAS;AAEX,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EACzC,MAAMD;AAAA,EACN,MAAMA;AAAA,EACN,MAAMC,IAAE,OAAO;AACjB,CAAC;;;ACPD,SAAS,SAAAC,cAAa;AACtB,SAAS,KAAAC,WAAS;AAEX,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EACzC,QAAQA,IAAE,MAAMD,MAAK;AAAA,EACrB,UAAUC,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAC9C,WAAWA,IAAE,KAAK,CAAC,OAAO,MAAM,CAAC,EAAE,SAAS;AAC9C,CAAC;;;ACPD,SAAS,UAAAC,eAAc;AAEvB,SAAS,KAAAC,WAAS;AAEX,IAAM,sBAAsB,eAAe,OAAO;AAAA,EACvD,MAAMA,IAAE,OAAO;AAAA,EACf,iBAAiBA,IACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAMA,IAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAUC,QAAO,SAAS;AAC5B,CAAC;;;ACXD,SAAS,UAAAC,SAAQ,oBAAAC,yBAAwB;AAEzC,SAAS,KAAAC,WAAS;AAEX,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAOA,IAAE,MAAMC,iBAAgB;AAAA,EAC/B,aAAaC,QAAO,SAAS;AAC/B,CAAC;;;ACTH,SAAS,YAAAC,kBAAgB;AAIlB,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,aAAaC;AAAA,EACb,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AACN,CAAC;;;ACZH,SAAS,YAAAC,kBAAgB;AAEzB,SAAS,KAAAC,WAAS;AAEX,IAAM,sBAAsB,eAChC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAUA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAaC,WAAS,SAAS;AAAA,EAC/B,OAAOA;AAAA,EACP,QAAQA;AACV,CAAC;;;ACZH,SAAS,YAAAC,kBAAgB;AAEzB,SAAS,KAAAC,WAAS;AAEX,IAAM,wBAAwB,eAClC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAUA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAaC,WAAS,SAAS;AAAA,EAC/B,QAAQA;AACV,CAAC;;;ACXH,SAAS,YAAAC,YAAU,aAAAC,YAAW,oBAAAC,yBAAwB;AACtD,SAAS,KAAAC,WAAS;AAEX,IAAM,sBAAsBA,IAAE,OAAO;AAAA,EAC1C,GAAGH;AAAA,EACH,GAAGA;AAAA,EACH,KAAKG,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC1B,SAASF,WAAU,SAAS;AAC9B,CAAC;AAEM,IAAM,iBAAiBE,IAAE,OAAO;AAAA,EACrC,KAAKA,IACF,OAAO,EACP,SAAS,EACT;AAAA,IACC;AAAA,EACF;AAAA,EACF,OAAOA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,QAAQD,kBAAiB,GAAG,mBAAmB,EAAE,SAAS;AAAA,EAC1D,SAASC,IACN,MAAMD,iBAAgB,EACtB,GAAGC,IAAE,MAAM,mBAAmB,CAAC,EAC/B,SAAS;AAAA,EACZ,YAAYA,IAAE,OAAO,EAAE,SAAS;AAClC,CAAC;;;ACtBD,SAAS,KAAAC,WAAS;AAEX,IAAM,YAAY,kBAAkB,OAAO;AAAA,EAChD,MAAMA,IAAE,OAAO;AAAA,EACf,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,SAASA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACtC;AACF,CAAC;;;ACFD,SAAS,KAAAC,WAAS;AAYX,IAAM,iBAAiBA,IAAE,OAAO;AAAA,EACrC,aAAa,YAAY,SAAS;AAAA,EAClC,YAAY,eAAe,SAAS;AAAA,EACpC,gBAAgBA,IAAE,OAAO,EAAE,SAAS;AAAA,EACpC,oBAAoBA,IAAE,OAAO,EAAE,SAAS;AAC1C,CAAC;AAED,iBAAiE,IAAI;","names":["z","z","distance","z","z","z","z","z","z","distance","z","distance","z","distance","distance","distance","z","z","z","z","z","z","z","z","z","z","z","z","z","z","point","z","point","z","route_hint_point","z","route_hint_point","z","point","z","point","z","z","distance","z","distance","z","distance","distance","z","distance","distance","z","distance","z","resistance","z","resistance","z","frequency","capacitance","z","frequency","capacitance","distance","z","z","distance","capacitance","z","capacitance","z","z","z","distance","length","z","distance","z","z","distance","z","z","distance","z","z","distance","distance","route_hint_point","z","z","distance","route_hint_point","layer_ref","z","layer_ref","z","z","distance","z","distance","z","rotation","z","distance","z","z","z","z","connectionTarget","connectionsProp","z","z","length","z","length","length","route_hint_point","z","route_hint_point","length","distance","route_hint_point","z","distance","layer_ref","layer_ref","distance","distance","z","distance","voltage","voltage","distance","z","distance","z","distance","z","point","z","length","z","length","length","route_hint_point","z","route_hint_point","length","distance","distance","distance","z","distance","distance","z","distance","distance","layer_ref","route_hint_point","z","z","z"]}
+{"version":3,"sources":["../lib/typecheck.ts","../lib/common/direction.ts","../lib/common/portHints.ts","../lib/common/layout.ts","../lib/common/cadModel.ts","../lib/common/point3.ts","../lib/common/footprintProp.ts","../lib/common/schematicPinDefinitions.ts","../lib/common/schematicPinStyle.ts","../lib/components/board.ts","../lib/common/point.ts","../lib/components/group.ts","../lib/manual-edits/manual-edit-events/base_manual_edit_event.ts","../lib/manual-edits/manual-edit-events/edit_pcb_component_location_event.ts","../lib/manual-edits/manual-edit-events/edit_trace_hint_event.ts","../lib/manual-edits/manual-edit-events/edit_schematic_component_location_event.ts","../lib/manual-edits/manual_edit_event.ts","../lib/manual-edits/manual_edits_file.ts","../lib/manual-edits/manual_pcb_placement.ts","../lib/manual-edits/manual_trace_hint.ts","../lib/manual-edits/manual_schematic_placement.ts","../lib/components/chip.ts","../lib/components/jumper.ts","../lib/components/platedhole.ts","../lib/components/resistor.ts","../lib/components/potentiometer.ts","../lib/components/crystal.ts","../lib/components/resonator.ts","../lib/components/stampboard.ts","../lib/components/capacitor.ts","../lib/components/net.ts","../lib/components/constrainedlayout.ts","../lib/common/distance.ts","../lib/components/constraint.ts","../lib/components/smtpad.ts","../lib/components/solderpaste.ts","../lib/components/hole.ts","../lib/components/trace.ts","../lib/components/footprint.ts","../lib/components/battery.ts","../lib/components/pin-header.ts","../lib/components/netalias.ts","../lib/components/push-button.ts","../lib/components/subcircuit.ts","../lib/components/transistor.ts","../lib/components/mosfet.ts","../lib/components/inductor.ts","../lib/components/diode.ts","../lib/components/led.ts","../lib/components/switch.ts","../lib/components/fabrication-note-text.ts","../lib/components/fabrication-note-path.ts","../lib/components/pcb-trace.ts","../lib/components/via.ts","../lib/components/pcb-keepout.ts","../lib/components/power-source.ts","../lib/components/schematic-box.ts","../lib/components/schematic-line.ts","../lib/components/schematic-text.ts","../lib/components/schematic-path.ts","../lib/components/silkscreen-text.ts","../lib/components/silkscreen-path.ts","../lib/components/silkscreen-line.ts","../lib/components/silkscreen-rect.ts","../lib/components/silkscreen-circle.ts","../lib/components/trace-hint.ts","../lib/components/port.ts","../lib/platformConfig.ts"],"sourcesContent":["import type { TypeEqual } from \"ts-expect\"\n\ntype IsNever<T> = [T] extends [never] ? true : false\n\ntype GetMismatchedProps<T1, T2> = {\n  [K in keyof T1 & keyof T2]: T1[K] extends T2[K]\n    ? T2[K] extends T1[K]\n      ? never\n      : K\n    : K\n}[keyof T1 & keyof T2]\n\nexport const expectTypesMatch = <\n  const T1,\n  const T2,\n  T3 = Exclude<keyof T1, keyof T2>,\n  T4 = Exclude<keyof T2, keyof T1>,\n  T5 = GetMismatchedProps<T1, T2>,\n>(\n  shouldBe: IsNever<T3> extends true\n    ? IsNever<T4> extends true\n      ? IsNever<T5> extends true\n        ? TypeEqual<T1, T2>\n        : `property ${T5 extends string ? T5 : \"\"} has mismatched types`\n      : `extra props ${T4 extends string ? T4 : \"\"}`\n    : `missing props ${T3 extends string ? T3 : \"\"}`,\n): void => {}\n\n// ------ TESTS -------\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: number\n    b: number\n  }\n>(\"extra props b\")\n\nexpectTypesMatch<\n  {\n    a: number\n    b: number\n  },\n  {\n    a: number\n  }\n>(\"missing props b\")\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: number\n  }\n>(true)\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: string\n  }\n>(\"property a has mismatched types\")\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nexport const direction = z.enum([\"up\", \"down\", \"left\", \"right\"])\nexport type Direction = \"up\" | \"down\" | \"left\" | \"right\"\n\nexport type DirectionAlongEdge =\n  | \"top-to-bottom\"\n  | \"left-to-right\"\n  | \"bottom-to-top\"\n  | \"right-to-left\"\n\nexport const directionAlongEdge = z.enum([\n  \"top-to-bottom\",\n  \"left-to-right\",\n  \"bottom-to-top\",\n  \"right-to-left\",\n])\n\nexpectTypesMatch<Direction, z.infer<typeof direction>>(true)\nexpectTypesMatch<DirectionAlongEdge, z.infer<typeof directionAlongEdge>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const portHints = z.array(z.string().or(z.number()))\nexport type PortHints = (string | number)[]\n\nexpectTypesMatch<PortHints, z.infer<typeof portHints>>(true)\n","import {\n  type LayerRefInput,\n  distance,\n  layer_ref,\n  rotation,\n  supplier_name,\n} from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport { type CadModelProp, cadModelProp } from \"./cadModel\"\nimport { type Footprint, footprintProp } from \"./footprintProp\"\n\nexport interface PcbLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n  layer?: LayerRefInput\n}\n\nexport interface CommonLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n\n  schX?: string | number\n  schY?: string | number\n  schRotation?: string | number\n\n  layer?: LayerRefInput\n  footprint?: Footprint\n}\n\nexport const pcbLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n})\ntype InferredPcbLayoutProps = z.input<typeof pcbLayoutProps>\nexpectTypesMatch<PcbLayoutProps, InferredPcbLayoutProps>(true)\n\nexport const commonLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n  footprint: footprintProp.optional(),\n})\n\ntype InferredCommonLayoutProps = z.input<typeof commonLayoutProps>\nexpectTypesMatch<CommonLayoutProps, InferredCommonLayoutProps>(true)\n\nexport type SupplierName =\n  | \"jlcpcb\"\n  | \"macrofab\"\n  | \"pcbway\"\n  | \"digikey\"\n  | \"mouser\"\n  | \"lcsc\"\nexport type SupplierPartNumbers = { [k in SupplierName]?: string[] }\nexport interface SupplierProps {\n  supplierPartNumbers?: SupplierPartNumbers\n}\nexport const supplierProps = z.object({\n  supplierPartNumbers: z.record(supplier_name, z.array(z.string())).optional(),\n})\n\nexpectTypesMatch<SupplierProps, z.input<typeof supplierProps>>(true)\n\nexport interface CommonComponentProps extends CommonLayoutProps {\n  key?: any\n  name: string\n  supplierPartNumbers?: SupplierPartNumbers\n  cadModel?: CadModelProp\n  children?: any\n  symbolName?: string\n}\n\nexport const commonComponentProps = commonLayoutProps\n  .merge(supplierProps)\n  .extend({\n    key: z.any().optional(),\n    name: z.string(),\n    cadModel: cadModelProp.optional(),\n    children: z.any().optional(),\n    symbolName: z.string().optional(),\n  })\n\ntype InferredCommonComponentProps = z.input<typeof commonComponentProps>\nexpectTypesMatch<CommonComponentProps, InferredCommonComponentProps>(true)\n\nexport const componentProps = commonComponentProps\nexport type ComponentProps = z.input<typeof componentProps>\n\nexport const lrPins = [\"pin1\", \"left\", \"pin2\", \"right\"] as const\nexport const lrPolarPins = [\n  \"pin1\",\n  \"left\",\n  \"anode\",\n  \"pos\",\n  \"pin2\",\n  \"right\",\n  \"cathode\",\n  \"neg\",\n] as const\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n","import { z } from \"zod\"\nimport { point3 } from \"./point3\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const rotationPoint3 = z.object({\n  x: z.union([z.number(), z.string()]),\n  y: z.union([z.number(), z.string()]),\n  z: z.union([z.number(), z.string()]),\n})\n\nexport interface CadModelBase {\n  rotationOffset?:\n    | number\n    | { x: number | string; y: number | string; z: number | string }\n  positionOffset?: {\n    x: number | string\n    y: number | string\n    z: number | string\n  }\n  size?: { x: number | string; y: number | string; z: number | string }\n}\n\nexport const cadModelBase = z.object({\n  rotationOffset: z.number().or(rotationPoint3).optional(),\n  positionOffset: point3.optional(),\n  size: point3.optional(),\n})\n\nexpectTypesMatch<CadModelBase, z.input<typeof cadModelBase>>(true)\n\nexport interface CadModelStl extends CadModelBase {\n  stlUrl: string\n}\nexport const cadModelStl = cadModelBase.extend({\n  stlUrl: z.string(),\n})\n\nexport interface CadModelObj extends CadModelBase {\n  objUrl: string\n  mtlUrl?: string\n}\nexport const cadModelObj = cadModelBase.extend({\n  objUrl: z.string(),\n  mtlUrl: z.string().optional(),\n})\n\nexport interface CadModelJscad extends CadModelBase {\n  jscad: Record<string, any>\n}\nexport const cadModelJscad = cadModelBase.extend({\n  jscad: z.record(z.any()),\n})\n\nexport type CadModelProp = string | CadModelStl | CadModelObj | CadModelJscad\n\nexport const cadModelProp = z.union([\n  z.string(),\n  cadModelStl,\n  cadModelObj,\n  cadModelJscad,\n])\n\ntype InferredCadModelProp = z.input<typeof cadModelProp>\nexpectTypesMatch<CadModelProp, InferredCadModelProp>(true)\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const point3 = z.object({\n  x: distance,\n  y: distance,\n  z: distance,\n})\n","import type { LayerRef } from \"circuit-json\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\n\n/**\n * This is an abbreviated definition of the soup elements that you can find here:\n * https://docs.tscircuit.com/api-reference/advanced/soup#pcb-smtpad\n */\nexport type FootprintSoupElements = {\n  type: \"pcb_smtpad\" | \"pcb_plated_hole\"\n  x: string | number\n  y: string | number\n  layer?: LayerRef\n  holeDiameter?: string | number\n  outerDiameter?: string | number\n  shape?: \"circle\" | \"rect\"\n  width?: string | number\n  height?: string | number\n  portHints?: string[]\n}\n\nexport type Footprint = string | ReactElement | FootprintSoupElements[]\nexport const footprintProp = z.custom<Footprint>((v) => true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\n/**\n * @deprecated Use SchematicPortArrangementWithPinCounts instead.\n */\nexport interface SchematicPortArrangementWithSizes {\n  leftSize?: number\n  topSize?: number\n  rightSize?: number\n  bottomSize?: number\n}\n\n/**\n * Specifies the number of pins on each side of the schematic box component.\n */\nexport interface SchematicPortArrangementWithPinCounts {\n  leftPinCount?: number\n  topPinCount?: number\n  rightPinCount?: number\n  bottomPinCount?: number\n}\n\nexport interface PinSideDefinition {\n  pins: Array<number | string>\n  direction:\n    | \"top-to-bottom\"\n    | \"left-to-right\"\n    | \"bottom-to-top\"\n    | \"right-to-left\"\n}\n\nexport interface SchematicPortArrangementWithSides {\n  leftSide?: PinSideDefinition\n  topSide?: PinSideDefinition\n  rightSide?: PinSideDefinition\n  bottomSide?: PinSideDefinition\n}\n\nexport interface SchematicPortArrangement\n  extends SchematicPortArrangementWithSizes,\n    SchematicPortArrangementWithSides,\n    SchematicPortArrangementWithPinCounts {}\n\nexport type SchematicPinArrangement = SchematicPortArrangement\nexport type SchematicPinArrangementWithSizes = SchematicPortArrangementWithSizes\nexport type SchematicPinArrangementWithSides = SchematicPortArrangementWithSides\nexport type SchematicPinArrangementWithPinCounts =\n  SchematicPortArrangementWithPinCounts\n\nexport const explicitPinSideDefinition = z.object({\n  pins: z.array(z.union([z.number(), z.string()])),\n  direction: z.union([\n    z.literal(\"top-to-bottom\"),\n    z.literal(\"left-to-right\"),\n    z.literal(\"bottom-to-top\"),\n    z.literal(\"right-to-left\"),\n  ]),\n})\n\n/**\n * @deprecated Use schematicPinArrangement instead.\n */\nexport const schematicPortArrangement = z.object({\n  leftSize: z.number().optional().describe(\"@deprecated, use leftPinCount\"),\n  topSize: z.number().optional().describe(\"@deprecated, use topPinCount\"),\n  rightSize: z.number().optional().describe(\"@deprecated, use rightPinCount\"),\n  bottomSize: z.number().optional().describe(\"@deprecated, use bottomPinCount\"),\n  leftPinCount: z.number().optional(),\n  rightPinCount: z.number().optional(),\n  topPinCount: z.number().optional(),\n  bottomPinCount: z.number().optional(),\n  leftSide: explicitPinSideDefinition.optional(),\n  rightSide: explicitPinSideDefinition.optional(),\n  topSide: explicitPinSideDefinition.optional(),\n  bottomSide: explicitPinSideDefinition.optional(),\n})\n\nexport const schematicPinArrangement = schematicPortArrangement\n\nexpectTypesMatch<\n  SchematicPortArrangement,\n  z.input<typeof schematicPortArrangement>\n>(true)\n","import { distance } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type SchematicPinStyle = Record<\n  string,\n  {\n    marginTop?: number | string\n    marginRight?: number | string\n    marginBottom?: number | string\n    marginLeft?: number | string\n\n    /** @deprecated use marginLeft */\n    leftMargin?: number | string\n    /** @deprecated use marginRight */\n    rightMargin?: number | string\n    /** @deprecated use marginTop */\n    topMargin?: number | string\n    /** @deprecated use marginBottom */\n    bottomMargin?: number | string\n  }\n>\n\nexport const schematicPinStyle = z.record(\n  z.object({\n    marginLeft: distance.optional(),\n    marginRight: distance.optional(),\n    marginTop: distance.optional(),\n    marginBottom: distance.optional(),\n\n    leftMargin: distance.optional(),\n    rightMargin: distance.optional(),\n    topMargin: distance.optional(),\n    bottomMargin: distance.optional(),\n  }),\n)\n\nexpectTypesMatch<SchematicPinStyle, z.input<typeof schematicPinStyle>>(true)\n","import type { LayoutBuilder, ManualEditFile } from \"@tscircuit/layout\"\nimport { distance } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport { type Point, point } from \"lib/common/point\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport { subcircuitGroupProps, type SubcircuitGroupProps } from \"./group\"\n\nexport interface BoardProps extends Omit<SubcircuitGroupProps, \"subcircuit\"> {\n  width?: number | string\n  height?: number | string\n  outline?: Point[]\n  outlineOffsetX?: number | string\n  outlineOffsetY?: number | string\n}\n\nexport const boardProps = subcircuitGroupProps.extend({\n  width: distance.optional(),\n  height: distance.optional(),\n  outline: z.array(point).optional(),\n  outlineOffsetX: distance.optional(),\n  outlineOffsetY: distance.optional(),\n})\n\ntype InferredBoardProps = z.input<typeof boardProps>\nexpectTypesMatch<BoardProps, InferredBoardProps>(true)\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const point = z.object({\n  x: distance,\n  y: distance,\n})\n\nexport type Point = { x: number | string; y: number | string }\n","import type { LayoutBuilder } from \"@tscircuit/layout\"\nimport { layer_ref, length } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport {\n  type CommonLayoutProps,\n  commonLayoutProps,\n  type SupplierPartNumbers,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport type { AnySourceComponent, PcbTrace } from \"circuit-json\"\nimport {\n  manual_edits_file,\n  type ManualEditsFile,\n  type ManualEditsFileInput,\n} from \"lib/manual-edits\"\n\nexport const layoutConfig = z.object({\n  layoutMode: z.enum([\"grid\", \"flex\", \"none\"]).optional(),\n  position: z.enum([\"absolute\", \"relative\"]).optional(),\n\n  grid: z.boolean().optional(),\n  gridCols: z.number().or(z.string()).optional(),\n  gridRows: z.number().or(z.string()).optional(),\n  gridTemplateRows: z.string().optional(),\n  gridTemplateColumns: z.string().optional(),\n  gridTemplate: z.string().optional(),\n  gridGap: z.number().or(z.string()).optional(),\n\n  flex: z.boolean().or(z.string()).optional(),\n  flexDirection: z.enum([\"row\", \"column\"]).optional(),\n  alignItems: z.enum([\"start\", \"center\", \"end\", \"stretch\"]).optional(),\n  justifyContent: z.enum([\"start\", \"center\", \"end\", \"stretch\"]).optional(),\n  flexRow: z.boolean().optional(),\n  flexColumn: z.boolean().optional(),\n  gap: z.number().or(z.string()).optional(),\n})\n\nexport interface LayoutConfig {\n  layoutMode?: \"grid\" | \"flex\" | \"none\"\n  position?: \"absolute\" | \"relative\"\n\n  grid?: boolean\n  gridCols?: number | string\n  gridRows?: number | string\n  gridTemplateRows?: string\n  gridTemplateColumns?: string\n  gridTemplate?: string\n  gridGap?: number | string\n\n  flex?: boolean | string\n  flexDirection?: \"row\" | \"column\"\n  alignItems?: \"start\" | \"center\" | \"end\" | \"stretch\"\n  justifyContent?: \"start\" | \"center\" | \"end\" | \"stretch\"\n  flexRow?: boolean\n  flexColumn?: boolean\n  gap?: number | string\n}\n\nexpectTypesMatch<LayoutConfig, z.input<typeof layoutConfig>>(true)\n\nexport interface BaseGroupProps extends CommonLayoutProps, LayoutConfig {\n  name?: string\n  key?: any\n  children?: any\n\n  pcbWidth?: Distance\n  pcbHeight?: Distance\n  schWidth?: Distance\n  schHeight?: Distance\n\n  pcbLayout?: LayoutConfig\n  schLayout?: LayoutConfig\n}\n\nexport type PartsEngine = {\n  findPart: (params: {\n    sourceComponent: AnySourceComponent\n    footprinterString?: string\n  }) => Promise<SupplierPartNumbers> | SupplierPartNumbers\n}\n\nexport interface PcbRouteCache {\n  pcbTraces: PcbTrace[]\n  cacheKey: string\n}\n\nexport interface AutorouterConfig {\n  serverUrl?: string\n  inputFormat?: \"simplified\" | \"circuit-json\"\n  serverMode?: \"job\" | \"solve-endpoint\"\n  serverCacheEnabled?: boolean\n  cache?: PcbRouteCache\n  groupMode?: \"sequential-trace\" | \"subcircuit\"\n  local?: boolean\n  algorithmFn?: (simpleRouteJson: any) => Promise<any>\n}\n\nexport type AutorouterProp =\n  | AutorouterConfig\n  | \"sequential-trace\"\n  | \"subcircuit\"\n  | \"auto\"\n  | \"auto-local\"\n  | \"auto-cloud\"\n\nexport const autorouterConfig = z.object({\n  serverUrl: z.string().optional(),\n  inputFormat: z.enum([\"simplified\", \"circuit-json\"]).optional(),\n  serverMode: z.enum([\"job\", \"solve-endpoint\"]).optional(),\n  serverCacheEnabled: z.boolean().optional(),\n  cache: z.custom<PcbRouteCache>((v) => true).optional(),\n  groupMode: z.enum([\"sequential-trace\", \"subcircuit\"]).optional(),\n  algorithmFn: z\n    .custom<(simpleRouteJson: any) => Promise<any>>(\n      (v) => typeof v === \"function\" || v === undefined,\n    )\n    .optional(),\n  local: z.boolean().optional(),\n})\n\nexport const autorouterProp = z.union([\n  autorouterConfig,\n  z.literal(\"sequential-trace\"),\n  z.literal(\"subcircuit\"),\n  z.literal(\"auto\"),\n  z.literal(\"auto-local\"),\n  z.literal(\"auto-cloud\"),\n])\n\nexport interface SubcircuitGroupProps extends BaseGroupProps {\n  layout?: LayoutBuilder\n  manualEdits?: ManualEditsFileInput\n  routingDisabled?: boolean\n  defaultTraceWidth?: Distance\n  minTraceWidth?: Distance\n  pcbRouteCache?: PcbRouteCache\n\n  autorouter?: AutorouterProp\n\n  /**\n   * If true, we'll automatically layout the schematic for this group. Must be\n   * a subcircuit (currently). This is eventually going to be replaced with more\n   * sophisticated layout options/modes and will be enabled by default.\n   */\n  schAutoLayoutEnabled?: boolean\n\n  /**\n   * If true, net labels will automatically be created for complex traces\n   */\n  schTraceAutoLabelEnabled?: boolean\n\n  partsEngine?: PartsEngine\n}\n\nexport interface SubcircuitGroupPropsWithBool extends SubcircuitGroupProps {\n  subcircuit: true\n}\n\nexport interface NonSubcircuitGroupProps extends BaseGroupProps {\n  subcircuit?: false | undefined\n}\n\nexport type GroupProps = SubcircuitGroupPropsWithBool | NonSubcircuitGroupProps\n\nexport const baseGroupProps = commonLayoutProps.extend({\n  name: z.string().optional(),\n  children: z.any().optional(),\n  key: z.any().optional(),\n\n  ...layoutConfig.shape,\n  pcbWidth: length.optional(),\n  pcbHeight: length.optional(),\n  schWidth: length.optional(),\n  schHeight: length.optional(),\n  pcbLayout: layoutConfig.optional(),\n  schLayout: layoutConfig.optional(),\n})\n\nexport const partsEngine = z.custom<PartsEngine>((v) => \"findPart\" in v)\n\nexport const subcircuitGroupProps = baseGroupProps.extend({\n  layout: z.custom<LayoutBuilder>((v) => true).optional(),\n  manualEdits: manual_edits_file.optional(),\n  schAutoLayoutEnabled: z.boolean().optional(),\n  schTraceAutoLabelEnabled: z.boolean().optional(),\n  routingDisabled: z.boolean().optional(),\n  defaultTraceWidth: length.optional(),\n  minTraceWidth: length.optional(),\n  partsEngine: partsEngine.optional(),\n  pcbRouteCache: z.custom<PcbRouteCache>((v) => true).optional(),\n  autorouter: autorouterProp.optional(),\n})\n\nexport const subcircuitGroupPropsWithBool = subcircuitGroupProps.extend({\n  subcircuit: z.literal(true),\n})\n\nexport const groupProps = z.discriminatedUnion(\"subcircuit\", [\n  baseGroupProps.extend({ subcircuit: z.literal(false).optional() }),\n  subcircuitGroupPropsWithBool,\n])\n\ntype InferredBaseGroupProps = z.input<typeof baseGroupProps>\ntype InferredSubcircuitGroupPropsWithBool = z.input<\n  typeof subcircuitGroupPropsWithBool\n>\n\nexpectTypesMatch<BaseGroupProps, InferredBaseGroupProps>(true)\nexpectTypesMatch<\n  SubcircuitGroupPropsWithBool,\n  InferredSubcircuitGroupPropsWithBool\n>(true)\n\ntype InferredGroupProps = z.input<typeof groupProps>\nexpectTypesMatch<GroupProps, InferredGroupProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport const base_manual_edit_event = z.object({\n  edit_event_id: z.string(),\n  in_progress: z.boolean().optional(),\n  created_at: z.number(),\n})\n\nexport interface BaseManualEditEvent {\n  edit_event_id: string\n  in_progress?: boolean\n  created_at: number\n}\n\nexport type BaseManualEditEventInput = z.input<typeof base_manual_edit_event>\n\nexpectTypesMatch<BaseManualEditEvent, z.infer<typeof base_manual_edit_event>>(\n  true,\n)\n","import { z } from \"zod\"\nimport {\n  base_manual_edit_event,\n  type BaseManualEditEvent,\n} from \"./base_manual_edit_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const edit_pcb_component_location_event = base_manual_edit_event.extend({\n  pcb_edit_event_type: z\n    .literal(\"edit_component_location\")\n    .describe(\"deprecated\"),\n  edit_event_type: z.literal(\"edit_pcb_component_location\"),\n  pcb_component_id: z.string(),\n  original_center: z.object({ x: z.number(), y: z.number() }),\n  new_center: z.object({ x: z.number(), y: z.number() }),\n})\n\n/** @deprecated use edit_pcb_component_location_event instead */\nexport const edit_component_location_event = edit_pcb_component_location_event\n\nexport interface EditPcbComponentLocationEvent extends BaseManualEditEvent {\n  edit_event_type: \"edit_pcb_component_location\"\n  /** @deprecated */\n  pcb_edit_event_type: \"edit_component_location\"\n  pcb_component_id: string\n  original_center: { x: number; y: number }\n  new_center: { x: number; y: number }\n}\n\nexport type EditPcbComponentLocationEventInput = z.input<\n  typeof edit_pcb_component_location_event\n>\n\nexpectTypesMatch<\n  EditPcbComponentLocationEvent,\n  z.infer<typeof edit_pcb_component_location_event>\n>(true)\n","import { z } from \"zod\"\nimport {\n  base_manual_edit_event,\n  type BaseManualEditEvent,\n} from \"./base_manual_edit_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { route_hint_point } from \"circuit-json\"\n\nexport const edit_trace_hint_event = base_manual_edit_event.extend({\n  pcb_edit_event_type: z.literal(\"edit_trace_hint\").describe(\"deprecated\"),\n  edit_event_type: z.literal(\"edit_pcb_trace_hint\").optional(),\n  pcb_port_id: z.string(),\n  pcb_trace_hint_id: z.string().optional(),\n  route: z.array(\n    z.object({ x: z.number(), y: z.number(), via: z.boolean().optional() }),\n  ),\n})\n\nexport interface EditTraceHintEvent extends BaseManualEditEvent {\n  /** @deprecated */\n  pcb_edit_event_type: \"edit_trace_hint\"\n  edit_event_type?: \"edit_pcb_trace_hint\"\n  pcb_port_id: string\n  pcb_trace_hint_id?: string\n  route: Array<{ x: number; y: number; via?: boolean }>\n}\n\nexport type EditTraceHintEventInput = z.input<typeof edit_trace_hint_event>\n\nexpectTypesMatch<EditTraceHintEvent, z.infer<typeof edit_trace_hint_event>>(\n  true,\n)\n","import { z } from \"zod\"\nimport {\n  base_manual_edit_event,\n  type BaseManualEditEvent,\n} from \"./base_manual_edit_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const edit_schematic_component_location_event =\n  base_manual_edit_event.extend({\n    edit_event_type: z.literal(\"edit_schematic_component_location\"),\n    schematic_component_id: z.string(),\n    original_center: z.object({ x: z.number(), y: z.number() }),\n    new_center: z.object({ x: z.number(), y: z.number() }),\n  })\n\nexport interface EditSchematicComponentLocationEvent\n  extends BaseManualEditEvent {\n  edit_event_type: \"edit_schematic_component_location\"\n  schematic_component_id: string\n  original_center: { x: number; y: number }\n  new_center: { x: number; y: number }\n}\n\nexport type EditSchematicComponentLocationEventInput = z.input<\n  typeof edit_schematic_component_location_event\n>\n\nexpectTypesMatch<\n  EditSchematicComponentLocationEvent,\n  z.infer<typeof edit_schematic_component_location_event>\n>(true)\n","import { z } from \"zod\"\nimport {\n  edit_pcb_component_location_event,\n  type EditPcbComponentLocationEvent,\n} from \"./manual-edit-events/edit_pcb_component_location_event\"\nimport {\n  edit_schematic_component_location_event,\n  type EditSchematicComponentLocationEvent,\n} from \"./manual-edit-events/edit_schematic_component_location_event\"\nimport {\n  edit_trace_hint_event,\n  type EditTraceHintEvent,\n} from \"./manual-edit-events/edit_trace_hint_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type ManualEditEvent =\n  | EditPcbComponentLocationEvent\n  | EditTraceHintEvent\n  | EditSchematicComponentLocationEvent\n\nexport const manual_edit_event = z.union([\n  edit_pcb_component_location_event,\n  edit_trace_hint_event,\n  edit_schematic_component_location_event,\n])\n\nexport type ManualEditEventInput = z.input<typeof manual_edit_event>\ntype InferredManualEditEvent = z.infer<typeof manual_edit_event>\n\nexpectTypesMatch<ManualEditEvent, InferredManualEditEvent>(true)\n","import { z } from \"zod\"\nimport {\n  manual_pcb_placement,\n  type ManualPcbPlacement,\n} from \"./manual_pcb_placement\"\nimport { manual_edit_event } from \"./manual_edit_event\"\nimport { manual_trace_hint, type ManualTraceHint } from \"./manual_trace_hint\"\nimport {\n  manual_schematic_placement,\n  type ManualSchematicPlacement,\n} from \"./manual_schematic_placement\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_edits_file = z.object({\n  pcb_placements: z.array(manual_pcb_placement).optional(),\n  manual_trace_hints: z.array(manual_trace_hint).optional(),\n  schematic_placements: z.array(manual_schematic_placement).optional(),\n})\n\nexport interface ManualEditsFile {\n  pcb_placements?: ManualPcbPlacement[]\n  manual_trace_hints?: ManualTraceHint[]\n  schematic_placements?: ManualSchematicPlacement[]\n}\n\nexport type ManualEditsFileInput = z.input<typeof manual_edits_file>\n\nexpectTypesMatch<ManualEditsFile, z.infer<typeof manual_edits_file>>(true)\n","import { z } from \"zod\"\nimport { point, type Point } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_pcb_placement = z.object({\n  selector: z.string(),\n  relative_to: z\n    .string()\n    .optional()\n    .default(\"group_center\")\n    .describe(\"Can be a selector or 'group_center'\"),\n  center: point,\n})\n\nexport interface ManualPcbPlacement {\n  selector: string\n  relative_to: string\n  center: Point\n}\n\nexport type ManualPcbPlacementInput = z.input<typeof manual_pcb_placement>\ntype InferredManualPcbPlacement = z.infer<typeof manual_pcb_placement>\n\nexpectTypesMatch<ManualPcbPlacement, InferredManualPcbPlacement>(true)\n","import { z } from \"zod\"\nimport { layer_ref, route_hint_point, type RouteHintPoint } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_trace_hint = z.object({\n  pcb_port_selector: z.string(),\n  offsets: z.array(route_hint_point),\n})\n\nexport interface ManualTraceHint {\n  pcb_port_selector: string\n  offsets: Array<RouteHintPoint>\n}\n\nexport type ManualTraceHintInput = z.input<typeof manual_trace_hint>\n\nexpectTypesMatch<ManualTraceHint, z.infer<typeof manual_trace_hint>>(true)\n","import { z } from \"zod\"\nimport { point, type Point } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_schematic_placement = z.object({\n  selector: z.string(),\n  relative_to: z\n    .string()\n    .optional()\n    .default(\"group_center\")\n    .describe(\"Can be a selector or 'group_center'\"),\n  center: point,\n})\n\nexport interface ManualSchematicPlacement {\n  selector: string\n  relative_to: string\n  center: Point\n}\n\nexport type ManualSchematicPlacementInput = z.input<\n  typeof manual_schematic_placement\n>\ntype InferredManualSchematicPlacement = z.infer<\n  typeof manual_schematic_placement\n>\n\nexpectTypesMatch<ManualSchematicPlacement, InferredManualSchematicPlacement>(\n  true,\n)\n","import { distance } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  type SchematicPortArrangement,\n  schematicPortArrangement as schematicPinArrangement,\n} from \"lib/common/schematicPinDefinitions\"\nimport {\n  type SchematicPinStyle,\n  schematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type ConnectionTarget = string\nexport type Connections<PinLabel extends string = string> = Partial<\n  Record<\n    PinLabel,\n    ConnectionTarget | ConnectionTarget[] | readonly ConnectionTarget[]\n  >\n>\n\nexport type PinLabelsProp<\n  PinNumber extends string = string,\n  PinLabel extends string = string,\n> = Record<PinNumber, PinLabel | readonly PinLabel[] | PinLabel[]>\n\nexport type PinLabelFromPinLabelMap<PinLabelMap extends PinLabelsProp> =\n  PinLabelMap extends PinLabelsProp<infer PinNumber, infer PinLabel>\n    ? PinLabel\n    : never\n\nexport interface ChipPropsSU<PinLabel extends string = string>\n  extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: PinLabelsProp<string, PinLabel>\n  schPinArrangement?: SchematicPortArrangement\n  /** @deprecated Use schPinArrangement instead. */\n  schPortArrangement?: SchematicPortArrangement\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: Distance\n  schWidth?: Distance\n  schHeight?: Distance\n  noSchematicRepresentation?: boolean\n  internallyConnectedPins?: string[][]\n  externallyConnectedPins?: string[][]\n  connections?: Connections<PinLabel>\n}\n\nexport type ChipProps<PinLabelMap extends PinLabelsProp | string = string> =\n  ChipPropsSU<\n    PinLabelMap extends PinLabelsProp\n      ? PinLabelFromPinLabelMap<PinLabelMap>\n      : PinLabelMap\n  >\n\n/**\n * Get the pin labels for a component\n *\n *   const pinLabels = { pin1: \"VCC\", pin2: \"GND\", pin3: \"DATA\" } as const\n *   export const MyChip = (props: ChipProps<typeof pinLabels>) => {\n *     // ...\n *   }\n *   type MyChipPinLabels = ChipPinLabels<typeof MyChip>\n *   // MyChipPinLabels is \"VCC\" | \"GND\" | \"DATA\"\n *\n */\nexport type ChipPinLabels<T extends (props: ChipProps<any>) => any> =\n  T extends (props: infer Props) => any\n    ? Props extends ChipProps<infer PinLabelMap>\n      ? PinLabelMap extends PinLabelsProp\n        ? PinLabelFromPinLabelMap<PinLabelMap>\n        : PinLabelMap extends string\n          ? PinLabelMap\n          : never\n      : never\n    : never\n\n/**\n * Get the connection prop type for a component\n *\n *   const pinLabels = { pin1: \"VCC\", pin2: \"GND\", pin3: \"DATA\" } as const\n *   export const MyChip = (props: ChipProps<typeof pinLabels>) => {\n *     // ...\n *   }\n *   const connections: ChipConnections<typeof MyChip> = {\n *     VCC: \"...\",\n *     GND: \"...\",\n *     DATA: \"...\",\n *   }\n *\n */\nexport type ChipConnections<T extends (props: ChipProps<any>) => any> = {\n  [K in ChipPinLabels<T>]: string\n}\n\nconst connectionTarget = z\n  .string()\n  .or(z.array(z.string()).readonly())\n  .or(z.array(z.string()))\n\nconst connectionsProp = z\n  .custom<Connections>()\n  .pipe(z.record(z.string(), connectionTarget))\n\nexport const pinLabelsProp = z.record(\n  z.string(),\n  z.string().or(z.array(z.string()).readonly()).or(z.array(z.string())),\n)\n\nexpectTypesMatch<PinLabelsProp, z.input<typeof pinLabelsProp>>(true)\n\nexport const chipProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: pinLabelsProp.optional(),\n  internallyConnectedPins: z.array(z.array(z.string())).optional(),\n  externallyConnectedPins: z.array(z.array(z.string())).optional(),\n  schPinArrangement: schematicPinArrangement.optional(),\n  schPortArrangement: schematicPinArrangement.optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n  noSchematicRepresentation: z.boolean().optional(),\n  connections: connectionsProp.optional(),\n})\n\n/**\n * @deprecated Use ChipProps instead.\n */\nexport const bugProps = chipProps\nexport type InferredChipProps = z.input<typeof chipProps>\n\n// Chip props are too complex to match up with zod types, we typecheck\n// them separately in the test files\nexpectTypesMatch<InferredChipProps, ChipPropsSU<string>>(true)\n","import { distance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  type SchematicPortArrangement,\n  schematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\nimport {\n  type SchematicPinStyle,\n  schematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface JumperProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string | string[]>\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: number | string\n  schWidth?: number | string\n  schHeight?: number | string\n  schDirection?: \"left\" | \"right\"\n  schPortArrangement?: SchematicPortArrangement\n}\n\nexport const jumperProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z\n    .record(z.number().or(z.string()), z.string().or(z.array(z.string())))\n    .optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n  schDirection: z.enum([\"left\", \"right\"]).optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n})\n\ntype InferredJumperProps = z.input<typeof jumperProps>\nexpectTypesMatch<JumperProps, InferredJumperProps>(true)\n","import { distance } from \"circuit-json\"\nimport type { PcbLayoutProps } from \"lib/common/layout\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { type PortHints, portHints } from \"lib/common/portHints\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface CirclePlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"circle\"\n  holeDiameter: number | string\n  outerDiameter: number | string\n  portHints?: PortHints\n}\n\nexport interface OvalPlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"oval\"\n  outerWidth: number | string\n  outerHeight: number | string\n  holeWidth: number | string\n  holeHeight: number | string\n  portHints?: PortHints\n\n  /** @deprecated use holeWidth */\n  innerWidth?: number | string\n  /** @deprecated use holeHeight */\n  innerHeight?: number | string\n}\n\nexport interface PillPlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"pill\"\n  outerWidth: number | string\n  outerHeight: number | string\n  holeWidth: number | string\n  holeHeight: number | string\n\n  /** @deprecated use holeWidth */\n  innerWidth?: number | string\n  /** @deprecated use holeHeight */\n  innerHeight?: number | string\n\n  portHints?: PortHints\n}\n\nexport interface CircularHoleWithRectPlatedProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  holeDiameter: number | string\n  rectPadWidth: number | string\n  rectPadHeight: number | string\n  holeShape?: \"circle\"\n  padShape?: \"rect\"\n  shape?: \"circularHoleWithRectPad\"\n  portHints?: PortHints\n}\n\nexport type PlatedHoleProps =\n  | CirclePlatedHoleProps\n  | OvalPlatedHoleProps\n  | PillPlatedHoleProps\n  | CircularHoleWithRectPlatedProps\n\nconst distanceHiddenUndefined = z\n  .custom<z.input<typeof distance>>()\n  .transform((a) => {\n    if (a === undefined) return undefined\n    return distance.parse(a)\n  })\n\nexport const platedHoleProps = z\n  .union([\n    pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n      name: z.string().optional(),\n      shape: z.literal(\"circle\"),\n      holeDiameter: distance,\n      outerDiameter: distance,\n      portHints: portHints.optional(),\n    }),\n    pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n      name: z.string().optional(),\n      shape: z.literal(\"oval\"),\n      outerWidth: distance,\n      outerHeight: distance,\n      holeWidth: distanceHiddenUndefined,\n      holeHeight: distanceHiddenUndefined,\n      innerWidth: distance.optional().describe(\"DEPRECATED use holeWidth\"),\n      innerHeight: distance.optional().describe(\"DEPRECATED use holeHeight\"),\n      portHints: portHints.optional(),\n    }),\n    pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n      name: z.string().optional(),\n      shape: z.literal(\"pill\"),\n      outerWidth: distance,\n      outerHeight: distance,\n      holeWidth: distanceHiddenUndefined,\n      holeHeight: distanceHiddenUndefined,\n      innerWidth: distance.optional().describe(\"DEPRECATED use holeWidth\"),\n      innerHeight: distance.optional().describe(\"DEPRECATED use holeHeight\"),\n      portHints: portHints.optional(),\n    }),\n    pcbLayoutProps\n      .omit({ pcbRotation: true, layer: true })\n      .extend({\n        name: z.string().optional(),\n        holeDiameter: distance,\n        rectPadWidth: distance,\n        rectPadHeight: distance,\n        holeShape: z.literal(\"circle\").optional(),\n        padShape: z.literal(\"rect\").optional(),\n        shape: z.literal(\"circularHoleWithRectPad\").optional(),\n        portHints: portHints.optional(),\n      })\n      .refine(\n        (prop) => {\n          return prop.shape === \"circularHoleWithRectPad\"\n            ? prop.holeDiameter && prop.rectPadWidth && prop.rectPadHeight\n            : true\n        },\n        {\n          message: \"Missing required fields for circularHoleWithRectPad\",\n        },\n      ),\n  ])\n  .refine((a) => {\n    if (\"innerWidth\" in a && a.innerWidth !== undefined) {\n      a.holeWidth ??= a.innerWidth\n    }\n    if (\"innerHeight\" in a && a.innerHeight !== undefined) {\n      a.holeHeight ??= a.innerHeight\n    }\n    return a\n  })\n\ntype InferredPlatedHoleProps = z.input<typeof platedHoleProps>\n\nexpectTypesMatch<PlatedHoleProps, InferredPlatedHoleProps>(true)\n","import { resistance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ResistorProps extends CommonComponentProps {\n  resistance: number | string\n  pullupFor?: string\n  pullupTo?: string\n  pulldownFor?: string\n  pulldownTo?: string\n}\n\nexport const resistorProps = commonComponentProps.extend({\n  resistance,\n\n  pullupFor: z.string().optional(),\n  pullupTo: z.string().optional(),\n\n  pulldownFor: z.string().optional(),\n  pulldownTo: z.string().optional(),\n})\nexport const resistorPins = lrPins\n\ntype InferredResistorProps = z.input<typeof resistorProps>\nexpectTypesMatch<ResistorProps, InferredResistorProps>(true)\n","import { resistance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type PotentiometerPinVariant = \"two_pin\" | \"three_pin\"\n\nexport interface PotentiometerProps extends CommonComponentProps {\n  maxResistance: number | string\n  pinVariant?: PotentiometerPinVariant\n}\n\nexport const potentiometerProps = commonComponentProps.extend({\n  maxResistance: resistance,\n  pinVariant: z.enum([\"two_pin\", \"three_pin\"]).optional(),\n})\n\ntype InferredPotentiometerProps = z.input<typeof potentiometerProps>\nexpectTypesMatch<PotentiometerProps, InferredPotentiometerProps>(true)\n","import { frequency, capacitance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type PinVariant = \"two_pin\" | \"four_pin\"\n\nexport interface CrystalProps extends CommonComponentProps {\n  frequency: number | string\n  loadCapacitance: number | string\n  pinVariant?: PinVariant\n}\n\nexport const crystalProps = commonComponentProps.extend({\n  frequency: frequency,\n  loadCapacitance: capacitance,\n  pinVariant: z.enum([\"two_pin\", \"four_pin\"]).optional(),\n})\nexport const crystalPins = lrPins\n\ntype InferredCrystalProps = z.input<typeof crystalProps>\nexpectTypesMatch<CrystalProps, InferredCrystalProps>(true)\n","import { frequency, capacitance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type ResonatorPinVariant = \"no_ground\" | \"ground_pin\" | \"two_ground_pins\"\n\nexport interface ResonatorProps extends CommonComponentProps {\n  frequency: number | string\n  loadCapacitance: number | string\n  pinVariant?: ResonatorPinVariant\n}\n\nexport const resonatorProps = commonComponentProps.extend({\n  frequency: frequency,\n  loadCapacitance: capacitance,\n  pinVariant: z.enum([\"no_ground\", \"ground_pin\", \"two_ground_pins\"]).optional(),\n})\n\ntype InferredResonatorProps = z.input<typeof resonatorProps>\nexpectTypesMatch<ResonatorProps, InferredResonatorProps>(true)\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { boardProps, type BoardProps } from \"lib/components/board\"\n\nexport interface StampboardProps extends BoardProps {\n  leftPinCount?: number\n  rightPinCount?: number\n  topPinCount?: number\n  bottomPinCount?: number\n  leftPins?: string[]\n  rightPins?: string[]\n  topPins?: string[]\n  bottomPins?: string[]\n  pinPitch?: number | string\n  innerHoles?: boolean\n}\n\nexport const stampboardProps = boardProps.extend({\n  leftPinCount: z.number().optional(),\n  rightPinCount: z.number().optional(),\n  topPinCount: z.number().optional(),\n  bottomPinCount: z.number().optional(),\n  leftPins: z.array(z.string()).optional(),\n  rightPins: z.array(z.string()).optional(),\n  topPins: z.array(z.string()).optional(),\n  bottomPins: z.array(z.string()).optional(),\n  pinPitch: distance.optional(),\n  innerHoles: z.boolean().optional(),\n})\n\ntype InferredStampboardProps = z.input<typeof stampboardProps>\nexpectTypesMatch<StampboardProps, InferredStampboardProps>(true)\n","import { capacitance, voltage } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPolarPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface CapacitorProps extends CommonComponentProps {\n  capacitance: number | string\n  maxVoltageRating?: number | string\n  schShowRatings?: boolean\n  polarized?: boolean\n  decouplingFor?: string\n  decouplingTo?: string\n  bypassFor?: string\n  bypassTo?: string\n  maxDecouplingTraceLength?: number\n}\n\nexport const capacitorProps = commonComponentProps.extend({\n  capacitance,\n  maxVoltageRating: voltage.optional(),\n  schShowRatings: z.boolean().optional().default(false),\n  polarized: z.boolean().optional().default(false),\n  decouplingFor: z.string().optional(),\n  decouplingTo: z.string().optional(),\n  bypassFor: z.string().optional(),\n  bypassTo: z.string().optional(),\n  maxDecouplingTraceLength: z.number().optional(),\n})\nexport const capacitorPins = lrPolarPins\n\nexpectTypesMatch<CapacitorProps, z.input<typeof capacitorProps>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface NetProps {\n  name: string\n}\n\nexport const netProps = z.object({\n  name: z.string(),\n})\n\ntype InferredNetProps = z.input<typeof netProps>\nexpectTypesMatch<NetProps, InferredNetProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ConstrainedLayoutProps {\n  name?: string\n  pcbOnly?: boolean\n  schOnly?: boolean\n}\n\nexport const constrainedLayoutProps = z.object({\n  name: z.string().optional(),\n  pcbOnly: z.boolean().optional(),\n  schOnly: z.boolean().optional(),\n})\n\nexport type InferredConstrainedLayoutProps = z.input<\n  typeof constrainedLayoutProps\n>\n\nexpectTypesMatch<InferredConstrainedLayoutProps, ConstrainedLayoutProps>(true)\n","import { z } from \"zod\"\n\nexport type Distance = number | string\n\nexport { distance, length } from \"circuit-json\"\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport type { Distance } from \"lib/common/distance\"\nimport { distance } from \"lib/common/distance\"\nimport { z } from \"zod\"\n\nexport type PcbXDistConstraint = {\n  pcb?: true\n  xDist: Distance\n\n  /**\n   * Selector for left component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  left: string\n\n  /**\n   * Selector for right component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  right: string\n\n  /**\n   * If true, the provided distance is the distance between the closest edges of\n   * the left and right components\n   */\n  edgeToEdge?: true\n\n  /**\n   * If true, the provided distance is the distance between the centers of the\n   * left and right components\n   */\n  centerToCenter?: true\n}\n\nexport type PcbYDistConstraint = {\n  pcb?: true\n  yDist: Distance\n\n  /**\n   * Selector for top component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 topedge\", \".R1 center\"\n   */\n  top: string\n\n  /**\n   * Selector for bottom component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 bottomedge\", \".R1 center\"\n   */\n  bottom: string\n\n  edgeToEdge?: true\n  centerToCenter?: true\n}\n\nexport type PcbSameYConstraint = {\n  pcb?: true\n  sameY?: true\n\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type PcbSameXConstraint = {\n  pcb?: true\n  sameX?: true\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type ConstraintProps =\n  | PcbXDistConstraint\n  | PcbYDistConstraint\n  | PcbSameYConstraint\n  | PcbSameXConstraint\n\n// -----------------------------------------------------------------------------\n// Zod\n// -----------------------------------------------------------------------------\n\nexport const pcbXDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  xDist: distance,\n  left: z.string(),\n  right: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbXDistConstraint, z.input<typeof pcbXDistConstraintProps>>(\n  true,\n)\n\nexport const pcbYDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  yDist: distance,\n  top: z.string(),\n  bottom: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbYDistConstraint, z.input<typeof pcbYDistConstraintProps>>(\n  true,\n)\n\nexport const pcbSameYConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameY: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameYConstraint, z.input<typeof pcbSameYConstraintProps>>(\n  true,\n)\n\nexport const pcbSameXConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameX: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameXConstraint, z.input<typeof pcbSameXConstraintProps>>(\n  true,\n)\n\nexport const constraintProps = z.union([\n  pcbXDistConstraintProps,\n  pcbYDistConstraintProps,\n  pcbSameYConstraintProps,\n  pcbSameXConstraintProps,\n])\n\nexpectTypesMatch<ConstraintProps, z.input<typeof constraintProps>>(true)\n","import {\n  pcbLayoutProps,\n  type CommonLayoutProps,\n  type PcbLayoutProps,\n} from \"lib/common/layout\"\nimport { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { portHints, type PortHints } from \"lib/common/portHints\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n  portHints?: PortHints\n}\n\nexport interface RotatedRectSmtPadProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rotated_rect\"\n  width: Distance\n  height: Distance\n  ccwRotation: number\n  portHints?: PortHints\n}\n\nexport interface CircleSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n  portHints?: PortHints\n}\n\nexport interface PillSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"pill\"\n  width: Distance\n  height: Distance\n  radius: Distance\n  portHints?: PortHints\n}\n\nexport type SmtPadProps =\n  | RectSmtPadProps\n  | CircleSmtPadProps\n  | RotatedRectSmtPadProps\n  | PillSmtPadProps\n\n// ----------------------------------------------------------------------------\n// Zod\n// ----------------------------------------------------------------------------\n\nexport const rectSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredRectSmtPadProps = z.input<typeof rectSmtPadProps>\nexpectTypesMatch<InferredRectSmtPadProps, RectSmtPadProps>(true)\n\nexport const rotatedRectSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rotated_rect\"),\n    width: distance,\n    height: distance,\n    ccwRotation: z.number(),\n    portHints: portHints.optional(),\n  })\ntype InferredRotatedRectSmtPadProps = z.input<typeof rotatedRectSmtPadProps>\nexpectTypesMatch<InferredRotatedRectSmtPadProps, RotatedRectSmtPadProps>(true)\n\nexport const circleSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredCircleSmtPadProps = z.input<typeof circleSmtPadProps>\nexpectTypesMatch<InferredCircleSmtPadProps, CircleSmtPadProps>(true)\n\nexport const pillSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"pill\"),\n    width: distance,\n    height: distance,\n    radius: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredPillSmtPadProps = z.input<typeof pillSmtPadProps>\nexpectTypesMatch<InferredPillSmtPadProps, PillSmtPadProps>(true)\n\nexport const smtPadProps = z.union([\n  circleSmtPadProps,\n  rectSmtPadProps,\n  rotatedRectSmtPadProps,\n  pillSmtPadProps,\n])\n\nexport type InferredSmtPadProps = z.input<typeof smtPadProps>\nexpectTypesMatch<InferredSmtPadProps, SmtPadProps>(true)\n","import { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { boolean, string, z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n}\n\nexport interface CircleSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n}\n\nexport type SolderPasteProps = RectSolderPasteProps | CircleSolderPasteProps\n\n// zod\n\nexport const rectSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  })\ntype InferredRectSolderPasteProps = z.input<typeof rectSolderPasteProps>\nexpectTypesMatch<InferredRectSolderPasteProps, RectSolderPasteProps>(true)\n\nexport const circleSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  })\ntype InferredCircleSolderPasteProps = z.input<typeof circleSolderPasteProps>\nexpectTypesMatch<InferredCircleSolderPasteProps, CircleSolderPasteProps>(true)\n\nexport const solderPasteProps = z.union([\n  circleSolderPasteProps,\n  rectSolderPasteProps,\n])\n\nexport type InferredSolderPasteProps = z.input<typeof solderPasteProps>\nexpectTypesMatch<InferredSolderPasteProps, SolderPasteProps>(true)\n","import { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface HoleProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  name?: string\n  diameter?: Distance\n  radius?: Distance\n}\n\nexport const holeProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    name: z.string().optional(),\n    diameter: distance.optional(),\n    radius: distance.optional(),\n  })\n  .transform((d) => ({\n    ...d,\n    diameter: d.diameter ?? 2 * d.radius!,\n    radius: d.radius ?? d.diameter! / 2,\n  }))\n\nexport type InferredHoleProps = z.input<typeof holeProps>\n\nexpectTypesMatch<HoleProps, InferredHoleProps>(true)\n","import { distance, route_hint_point } from \"circuit-json\"\nimport { z } from \"zod\"\nimport { point } from \"../common/point\"\n\nexport const portRef = z.union([\n  z.string(),\n  z.custom<{ getPortSelector: () => string }>((v) =>\n    Boolean(v.getPortSelector),\n  ),\n])\n\nconst baseTraceProps = z.object({\n  key: z.string().optional(),\n  thickness: distance.optional(),\n  schematicRouteHints: z.array(point).optional(),\n  pcbRouteHints: z.array(route_hint_point).optional(),\n  schDisplayLabel: z.string().optional(),\n  maxLength: distance.optional(),\n})\n\nexport const traceProps = z.union([\n  baseTraceProps.extend({\n    path: z.array(portRef),\n  }),\n  baseTraceProps.extend({\n    from: portRef,\n    to: portRef,\n  }),\n])\n\nexport type TraceProps = z.input<typeof traceProps>\n","import { type LayerRef, layer_ref } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface FootprintProps {\n  /**\n   * The layer that the footprint is designed for. If you set this to \"top\"\n   * then it means the children were intended to represent the top layer. If\n   * the <chip /> with this footprint is moved to the bottom layer, then the\n   * components will be mirrored.\n   *\n   * Generally, you shouldn't set this except where it can help prevent\n   * confusion because you have a complex multi-layer footprint. Default is\n   * \"top\" and this is most intuitive.\n   */\n  originalLayer?: LayerRef\n}\n\nexport const footprintProps = z.object({\n  originalLayer: layer_ref.default(\"top\").optional(),\n})\n\nexport type FootprintPropsInput = z.input<typeof footprintProps>\ntype InferredFootprintProps = z.infer<typeof footprintProps>\nexpectTypesMatch<InferredFootprintProps, FootprintProps>(true)\n","import { z } from \"zod\"\nimport {\n  commonComponentProps,\n  lrPins,\n  lrPolarPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\n/** @deprecated use battery_capacity from circuit-json when circuit-json is updated */\nconst capacity = z\n  .number()\n  .or(z.string().endsWith(\"mAh\"))\n  .transform((v) => {\n    if (typeof v === \"string\") {\n      const valString = v.replace(\"mAh\", \"\")\n      const num = Number.parseFloat(valString)\n      if (Number.isNaN(num)) {\n        throw new Error(\"Invalid capacity\")\n      }\n      return num\n    }\n    return v\n  })\n  .describe(\"Battery capacity in mAh\")\n\nexport interface BatteryProps extends CommonComponentProps {\n  capacity?: number | string\n}\n\nexport const batteryProps = commonComponentProps.extend({\n  capacity: capacity.optional(),\n})\nexport const batteryPins = lrPolarPins\n\nexpectTypesMatch<BatteryProps, z.input<typeof batteryProps>>(true)\n","import { distance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface PinHeaderProps extends CommonComponentProps {\n  /**\n   * Number of pins in the header\n   */\n  pinCount: number\n\n  /**\n   * Distance between pins\n   */\n  pitch?: number | string\n\n  /**\n   * Schematic facing direction\n   */\n  schFacingDirection?: \"up\" | \"down\" | \"left\" | \"right\"\n\n  /**\n   * Whether the header is male or female\n   */\n  gender?: \"male\" | \"female\"\n\n  /**\n   * Whether to show pin labels in silkscreen\n   */\n  showSilkscreenPinLabels?: boolean\n\n  /**\n   * Whether the header has two rows of pins\n   */\n  doubleRow?: boolean\n\n  /**\n   * Diameter of the through-hole for each pin\n   */\n  holeDiameter?: number | string\n\n  /**\n   * Diameter of the plated area around each hole\n   */\n  platedDiameter?: number | string\n\n  /**\n   * Labels for each pin\n   */\n  pinLabels?: string[]\n\n  /**\n   * Direction the header is facing\n   */\n  facingDirection?: \"left\" | \"right\"\n}\n\nexport const pinHeaderProps = commonComponentProps.extend({\n  pinCount: z.number(),\n  pitch: distance.optional(),\n  schFacingDirection: z.enum([\"up\", \"down\", \"left\", \"right\"]).optional(),\n  gender: z.enum([\"male\", \"female\"]).optional().default(\"male\"),\n  showSilkscreenPinLabels: z.boolean().optional(),\n  doubleRow: z.boolean().optional(),\n  holeDiameter: distance.optional(),\n  platedDiameter: distance.optional(),\n  pinLabels: z.array(z.string()).optional(),\n  facingDirection: z.enum([\"left\", \"right\"]).optional(),\n})\n\ntype InferredPinHeaderProps = z.input<typeof pinHeaderProps>\nexpectTypesMatch<PinHeaderProps, InferredPinHeaderProps>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { distance } from \"lib/common/distance\"\nimport { rotation } from \"circuit-json\"\n\nexport interface NetAliasProps {\n  net?: string\n  schX?: number | string\n  schY?: number | string\n  schRotation?: number | string\n  anchorSide?: \"left\" | \"up\" | \"right\" | \"down\"\n}\n\nexport const netAliasProps = z.object({\n  net: z.string().optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  anchorSide: z.enum([\"left\", \"up\", \"right\", \"down\"]).optional(),\n})\n\ntype InferredNetAliasProps = z.input<typeof netAliasProps>\nexpectTypesMatch<NetAliasProps, InferredNetAliasProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport { chipProps, type ChipProps, type PinLabelsProp } from \"./chip\"\n\nexport type PushButtonProps<T extends PinLabelsProp | string = string> =\n  ChipProps<T>\n\nexport const pushButtonProps = chipProps.extend({})\n\nexpectTypesMatch<PushButtonProps, z.input<typeof pushButtonProps>>(true)\n","import type { SubcircuitGroupProps } from \"./group\"\nimport { subcircuitGroupProps } from \"./group\"\nimport type { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type SubcircuitProps = SubcircuitGroupProps\n\nexport const subcircuitProps = subcircuitGroupProps\n\ntype InferredSubcircuitProps = z.input<typeof subcircuitProps>\nexpectTypesMatch<SubcircuitProps, InferredSubcircuitProps>(true)\n","import {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface TransistorProps extends CommonComponentProps {\n  type: \"npn\" | \"pnp\" | \"bjt\" | \"jfet\" | \"mosfet\"\n}\n\nexport const transistorProps = commonComponentProps.extend({\n  type: z.enum([\"npn\", \"pnp\", \"bjt\", \"jfet\", \"mosfet\"]),\n})\n\nexport const transistorPins = [\n  \"pin1\",\n  \"emitter\",\n  \"pin2\",\n  \"collector\",\n  \"pin3\",\n  \"base\",\n] as const\n\ntype InferredTransistorProps = z.input<typeof transistorProps>\nexpectTypesMatch<TransistorProps, InferredTransistorProps>(true)\n","import {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"../common/layout\"\nimport { expectTypesMatch } from \"../typecheck\"\nimport { z } from \"zod\"\n\nexport interface MosfetProps extends CommonComponentProps {\n  channelType: \"n\" | \"p\"\n  mosfetMode: \"enhancement\" | \"depletion\"\n}\n\nexport const mosfetProps = commonComponentProps.extend({\n  channelType: z.enum([\"n\", \"p\"]),\n  mosfetMode: z.enum([\"enhancement\", \"depletion\"]),\n})\n\nexport const mosfetPins = [\n  \"pin1\",\n  \"drain\",\n  \"pin2\",\n  \"source\",\n  \"pin3\",\n  \"gate\",\n] as const\n\ntype InferredMosfetProps = z.input<typeof mosfetProps>\nexpectTypesMatch<MosfetProps, InferredMosfetProps>(true)\n","import { inductance } from \"circuit-json\"\nimport { commonComponentProps, lrPins } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const inductorProps = commonComponentProps.extend({\n  inductance,\n})\nexport const inductorPins = lrPins\nexport type InductorProps = z.input<typeof inductorProps>\n","import {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPolarPins,\n} from \"lib/common/layout\"\nimport { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nconst diodeConnectionKeys = z.enum([\n  \"anode\",\n  \"cathode\",\n  \"pin1\",\n  \"pin2\",\n  \"pos\",\n  \"neg\",\n])\n\nconst connectionTarget = z\n  .string()\n  .or(z.array(z.string()).readonly())\n  .or(z.array(z.string()))\n\nconst connectionsProp = z.record(diodeConnectionKeys, connectionTarget)\n\nexport const diodeProps = commonComponentProps.extend({\n  connections: connectionsProp.optional(),\n})\n\nexport const diodePins = lrPolarPins\n\nexport interface DiodeProps extends CommonComponentProps {\n  connections?: {\n    anode?: string | string[] | readonly string[]\n    cathode?: string | string[] | readonly string[]\n    pin1?: string | string[] | readonly string[]\n    pin2?: string | string[] | readonly string[]\n    pos?: string | string[] | readonly string[]\n    neg?: string | string[] | readonly string[]\n  }\n}\n\nexport type InferredDiodeProps = z.input<typeof diodeProps>\nexpectTypesMatch<InferredDiodeProps, DiodeProps>(true)\n","import { commonComponentProps, lrPolarPins } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const ledProps = commonComponentProps.extend({\n  color: z.string().optional(),\n})\nexport const ledPins = lrPolarPins\nexport type LedProps = z.input<typeof ledProps>\n","import {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nimport { z } from \"zod\"\n\nexport interface SwitchProps extends CommonComponentProps {\n  type?: \"spst\" | \"spdt\" | \"dpst\" | \"dpdt\"\n  isNormallyClosed?: boolean\n  spdt?: boolean\n  spst?: boolean\n  dpst?: boolean\n  dpdt?: boolean\n}\n\nexport const switchProps = commonComponentProps\n  .extend({\n    type: z.enum([\"spst\", \"spdt\", \"dpst\", \"dpdt\"]).optional(),\n    isNormallyClosed: z.boolean().optional().default(false),\n    spst: z.boolean().optional(),\n    spdt: z.boolean().optional(),\n    dpst: z.boolean().optional(),\n    dpdt: z.boolean().optional(),\n  })\n  .transform((props) => {\n    const updatedProps: SwitchProps = { ...props }\n\n    if (updatedProps.dpdt) {\n      updatedProps.type = \"dpdt\"\n    } else if (updatedProps.spst) {\n      updatedProps.type = \"spst\"\n    } else if (updatedProps.spdt) {\n      updatedProps.type = \"spdt\"\n    } else if (updatedProps.dpst) {\n      updatedProps.type = \"dpst\"\n    }\n\n    switch (updatedProps.type) {\n      case \"spdt\":\n        updatedProps.spdt = true\n        break\n      case \"spst\":\n        updatedProps.spst = true\n        break\n      case \"dpst\":\n        updatedProps.dpst = true\n        break\n      case \"dpdt\":\n        updatedProps.dpdt = true\n        break\n    }\n\n    return updatedProps\n  })\n\nexport type InferredSwitchProps = z.infer<typeof switchProps>\nexpectTypesMatch<SwitchProps, InferredSwitchProps>(true)\n","import { length } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const fabricationNoteTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n  color: z.string().optional(),\n})\nexport type FabricationNoteTextProps = z.input<typeof fabricationNoteTextProps>\n","import { length, route_hint_point } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const fabricationNotePathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n    color: z.string().optional(),\n  })\nexport type FabricationNotePathProps = z.input<typeof fabricationNotePathProps>\n","import { distance, route_hint_point } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const pcbTraceProps = z.object({\n  layer: z.string().optional(),\n  thickness: distance.optional(),\n  route: z.array(route_hint_point),\n})\nexport type PcbTraceProps = z.input<typeof pcbTraceProps>\n","import { distance, layer_ref } from \"circuit-json\"\nimport { commonLayoutProps } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const viaProps = commonLayoutProps.extend({\n  fromLayer: layer_ref,\n  toLayer: layer_ref,\n  holeDiameter: distance,\n  outerDiameter: distance,\n})\nexport type ViaProps = z.input<typeof viaProps>\n","import { distance } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const pcbKeepoutProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true }).extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  }),\n  pcbLayoutProps.extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  }),\n])\nexport type PcbKeepoutProps = z.input<typeof pcbKeepoutProps>\n","import { voltage } from \"circuit-json\"\nimport { commonComponentProps } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const powerSourceProps = commonComponentProps.extend({\n  voltage,\n})\nexport type PowerSourceProps = z.input<typeof powerSourceProps>\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const schematicBoxProps = z.object({\n  schX: distance,\n  schY: distance,\n  width: distance,\n  height: distance,\n})\nexport type SchematicBoxProps = z.input<typeof schematicBoxProps>\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const schematicLineProps = z.object({\n  x1: distance,\n  y1: distance,\n  x2: distance,\n  y2: distance,\n})\nexport type SchematicLineProps = z.input<typeof schematicLineProps>\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const schematicTextProps = z.object({\n  schX: distance,\n  schY: distance,\n  text: z.string(),\n})\nexport type SchematicTextProps = z.input<typeof schematicTextProps>\n","import { point } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const schematicPathProps = z.object({\n  points: z.array(point),\n  isFilled: z.boolean().optional().default(false),\n  fillColor: z.enum([\"red\", \"blue\"]).optional(),\n})\nexport type SchematicPathProps = z.input<typeof schematicPathProps>\n","import { length } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const silkscreenTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n})\nexport type SilkscreenTextProps = z.input<typeof silkscreenTextProps>\n","import { length, route_hint_point } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const silkscreenPathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n  })\nexport type SilkscreenPathProps = z.input<typeof silkscreenPathProps>\n","import { distance } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const silkscreenLineProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    strokeWidth: distance,\n    x1: distance,\n    y1: distance,\n    x2: distance,\n    y2: distance,\n  })\nexport type SilkscreenLineProps = z.input<typeof silkscreenLineProps>\n","import { distance } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const silkscreenRectProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    width: distance,\n    height: distance,\n  })\nexport type SilkscreenRectProps = z.input<typeof silkscreenRectProps>\n","import { distance } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const silkscreenCircleProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    radius: distance,\n  })\nexport type SilkscreenCircleProps = z.input<typeof silkscreenCircleProps>\n","import { distance, layer_ref, route_hint_point } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const routeHintPointProps = z.object({\n  x: distance,\n  y: distance,\n  via: z.boolean().optional(),\n  toLayer: layer_ref.optional(),\n})\n\nexport const traceHintProps = z.object({\n  for: z\n    .string()\n    .optional()\n    .describe(\n      \"Selector for the port you're targeting, not required if you're inside a trace\",\n    ),\n  order: z.number().optional(),\n  offset: route_hint_point.or(routeHintPointProps).optional(),\n  offsets: z\n    .array(route_hint_point)\n    .or(z.array(routeHintPointProps))\n    .optional(),\n  traceWidth: z.number().optional(),\n})\n\nexport type TraceHintProps = z.input<typeof traceHintProps>\n","import { direction } from \"lib/common/direction\"\nimport { commonLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const portProps = commonLayoutProps.extend({\n  name: z.string(),\n  pinNumber: z.number().optional(),\n  aliases: z.array(z.string()).optional(),\n  direction: direction,\n})\nexport type PortProps = z.input<typeof portProps>\n","import {\n  autorouterProp,\n  type AutorouterProp,\n  type PartsEngine,\n  partsEngine,\n} from \"./components/group\"\nimport { expectTypesMatch } from \"./typecheck\"\nimport { z } from \"zod\"\n\nexport interface PlatformConfig {\n  partsEngine?: PartsEngine\n\n  autorouter?: AutorouterProp\n\n  registryApiUrl?: string\n\n  cloudAutorouterUrl?: string\n}\n\nexport const platformConfig = z.object({\n  partsEngine: partsEngine.optional(),\n  autorouter: autorouterProp.optional(),\n  registryApiUrl: z.string().optional(),\n  cloudAutorouterUrl: z.string().optional(),\n})\n\nexpectTypesMatch<PlatformConfig, z.infer<typeof platformConfig>>(true)\n"],"mappings":";AAYO,IAAM,mBAAmB,CAO9B,aAOS;AAAC;AAIZ,iBAQE,eAAe;AAEjB,iBAQE,iBAAiB;AAEnB,iBAOE,IAAI;AAEN,iBAOE,iCAAiC;;;ACjEnC,SAAS,SAAS;AACX,IAAM,YAAY,EAAE,KAAK,CAAC,MAAM,QAAQ,QAAQ,OAAO,CAAC;AASxD,IAAM,qBAAqB,EAAE,KAAK;AAAA,EACvC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAuD,IAAI;AAC3D,iBAAyE,IAAI;;;ACnB7E,SAAS,KAAAA,UAAS;AAGX,IAAM,YAAYC,GAAE,MAAMA,GAAE,OAAO,EAAE,GAAGA,GAAE,OAAO,CAAC,CAAC;AAG1D,iBAAuD,IAAI;;;ACN3D;AAAA,EAEE,YAAAC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,OACK;AAEP,SAAS,KAAAC,UAAS;;;ACRlB,SAAS,KAAAC,UAAS;;;ACAlB,SAAS,gBAAgB;AACzB,SAAS,KAAAC,UAAS;AAEX,IAAM,SAASA,GAAE,OAAO;AAAA,EAC7B,GAAG;AAAA,EACH,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ADHM,IAAM,iBAAiBC,GAAE,OAAO;AAAA,EACrC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AACrC,CAAC;AAcM,IAAM,eAAeA,GAAE,OAAO;AAAA,EACnC,gBAAgBA,GAAE,OAAO,EAAE,GAAG,cAAc,EAAE,SAAS;AAAA,EACvD,gBAAgB,OAAO,SAAS;AAAA,EAChC,MAAM,OAAO,SAAS;AACxB,CAAC;AAED,iBAA6D,IAAI;AAK1D,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQA,GAAE,OAAO;AACnB,CAAC;AAMM,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQA,GAAE,OAAO;AAAA,EACjB,QAAQA,GAAE,OAAO,EAAE,SAAS;AAC9B,CAAC;AAKM,IAAM,gBAAgB,aAAa,OAAO;AAAA,EAC/C,OAAOA,GAAE,OAAOA,GAAE,IAAI,CAAC;AACzB,CAAC;AAIM,IAAM,eAAeA,GAAE,MAAM;AAAA,EAClCA,GAAE,OAAO;AAAA,EACT;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAqD,IAAI;;;AE7DzD,SAAS,KAAAC,UAAS;AAoBX,IAAM,gBAAgBA,GAAE,OAAkB,CAAC,MAAM,IAAI;;;AHUrD,IAAM,iBAAiBC,GAAE,OAAO;AAAA,EACrC,MAAMC,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,OAAO,UAAU,SAAS;AAC5B,CAAC;AAED,iBAAyD,IAAI;AAEtD,IAAM,oBAAoBD,GAAE,OAAO;AAAA,EACxC,MAAMC,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,MAAMA,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,OAAO,UAAU,SAAS;AAAA,EAC1B,WAAW,cAAc,SAAS;AACpC,CAAC;AAGD,iBAA+D,IAAI;AAa5D,IAAM,gBAAgBD,GAAE,OAAO;AAAA,EACpC,qBAAqBA,GAAE,OAAO,eAAeA,GAAE,MAAMA,GAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAC7E,CAAC;AAED,iBAA+D,IAAI;AAW5D,IAAM,uBAAuB,kBACjC,MAAM,aAAa,EACnB,OAAO;AAAA,EACN,KAAKA,GAAE,IAAI,EAAE,SAAS;AAAA,EACtB,MAAMA,GAAE,OAAO;AAAA,EACf,UAAU,aAAa,SAAS;AAAA,EAChC,UAAUA,GAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,YAAYA,GAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAGH,iBAAqE,IAAI;AAElE,IAAM,iBAAiB;AAGvB,IAAM,SAAS,CAAC,QAAQ,QAAQ,QAAQ,OAAO;AAC/C,IAAM,cAAc;AAAA,EACzB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAEO,IAAM,uBAAuBC,UAAS,GAAGD,GAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;;;AI5G1E,SAAS,KAAAE,UAAS;AAiDX,IAAM,4BAA4BA,GAAE,OAAO;AAAA,EAChD,MAAMA,GAAE,MAAMA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC,CAAC;AAAA,EAC/C,WAAWA,GAAE,MAAM;AAAA,IACjBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,EAC3B,CAAC;AACH,CAAC;AAKM,IAAM,2BAA2BA,GAAE,OAAO;AAAA,EAC/C,UAAUA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,+BAA+B;AAAA,EACxE,SAASA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,8BAA8B;AAAA,EACtE,WAAWA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,gCAAgC;AAAA,EAC1E,YAAYA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,iCAAiC;AAAA,EAC5E,cAAcA,GAAE,OAAO,EAAE,SAAS;AAAA,EAClC,eAAeA,GAAE,OAAO,EAAE,SAAS;AAAA,EACnC,aAAaA,GAAE,OAAO,EAAE,SAAS;AAAA,EACjC,gBAAgBA,GAAE,OAAO,EAAE,SAAS;AAAA,EACpC,UAAU,0BAA0B,SAAS;AAAA,EAC7C,WAAW,0BAA0B,SAAS;AAAA,EAC9C,SAAS,0BAA0B,SAAS;AAAA,EAC5C,YAAY,0BAA0B,SAAS;AACjD,CAAC;AAEM,IAAM,0BAA0B;AAEvC,iBAGE,IAAI;;;ACnFN,SAAS,YAAAC,iBAAgB;AAEzB,SAAS,KAAAC,UAAS;AAqBX,IAAM,oBAAoBA,GAAE;AAAA,EACjCA,GAAE,OAAO;AAAA,IACP,YAAYC,UAAS,SAAS;AAAA,IAC9B,aAAaA,UAAS,SAAS;AAAA,IAC/B,WAAWA,UAAS,SAAS;AAAA,IAC7B,cAAcA,UAAS,SAAS;AAAA,IAEhC,YAAYA,UAAS,SAAS;AAAA,IAC9B,aAAaA,UAAS,SAAS;AAAA,IAC/B,WAAWA,UAAS,SAAS;AAAA,IAC7B,cAAcA,UAAS,SAAS;AAAA,EAClC,CAAC;AACH;AAEA,iBAAuE,IAAI;;;ACpC3E,SAAS,YAAAC,iBAAgB;;;ACDzB,SAAS,YAAAC,iBAAgB;AACzB,SAAS,KAAAC,UAAS;AAEX,IAAM,QAAQA,GAAE,OAAO;AAAA,EAC5B,GAAGD;AAAA,EACH,GAAGA;AACL,CAAC;;;ADDD,SAAS,KAAAE,WAAS;;;AEJlB,SAAoB,cAAc;AAQlC,SAAS,KAAAC,WAAS;;;ACRlB,SAAS,KAAAC,WAAS;AAEX,IAAM,yBAAyBA,IAAE,OAAO;AAAA,EAC7C,eAAeA,IAAE,OAAO;AAAA,EACxB,aAAaA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAClC,YAAYA,IAAE,OAAO;AACvB,CAAC;AAUD;AAAA,EACE;AACF;;;ACnBA,SAAS,KAAAC,WAAS;AAOX,IAAM,oCAAoC,uBAAuB,OAAO;AAAA,EAC7E,qBAAqBC,IAClB,QAAQ,yBAAyB,EACjC,SAAS,YAAY;AAAA,EACxB,iBAAiBA,IAAE,QAAQ,6BAA6B;AAAA,EACxD,kBAAkBA,IAAE,OAAO;AAAA,EAC3B,iBAAiBA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AAAA,EAC1D,YAAYA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AACvD,CAAC;AAGM,IAAM,gCAAgC;AAe7C,iBAGE,IAAI;;;ACpCN,SAAS,KAAAC,WAAS;AAMlB,OAAiC;AAE1B,IAAM,wBAAwB,uBAAuB,OAAO;AAAA,EACjE,qBAAqBC,IAAE,QAAQ,iBAAiB,EAAE,SAAS,YAAY;AAAA,EACvE,iBAAiBA,IAAE,QAAQ,qBAAqB,EAAE,SAAS;AAAA,EAC3D,aAAaA,IAAE,OAAO;AAAA,EACtB,mBAAmBA,IAAE,OAAO,EAAE,SAAS;AAAA,EACvC,OAAOA,IAAE;AAAA,IACPA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,GAAG,KAAKA,IAAE,QAAQ,EAAE,SAAS,EAAE,CAAC;AAAA,EACxE;AACF,CAAC;AAaD;AAAA,EACE;AACF;;;AC/BA,SAAS,KAAAC,WAAS;AAOX,IAAM,0CACX,uBAAuB,OAAO;AAAA,EAC5B,iBAAiBC,IAAE,QAAQ,mCAAmC;AAAA,EAC9D,wBAAwBA,IAAE,OAAO;AAAA,EACjC,iBAAiBA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AAAA,EAC1D,YAAYA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AACvD,CAAC;AAcH,iBAGE,IAAI;;;AC9BN,SAAS,KAAAC,WAAS;AAoBX,IAAM,oBAAoBC,IAAE,MAAM;AAAA,EACvC;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAKD,iBAA2D,IAAI;;;AC7B/D,SAAS,KAAAC,WAAS;;;ACAlB,SAAS,KAAAC,WAAS;AAClB,SAAS,SAAAC,cAAyB;AAG3B,IAAM,uBAAuBC,IAAE,OAAO;AAAA,EAC3C,UAAUA,IAAE,OAAO;AAAA,EACnB,aAAaA,IACV,OAAO,EACP,SAAS,EACT,QAAQ,cAAc,EACtB,SAAS,qCAAqC;AAAA,EACjD,QAAQC;AACV,CAAC;AAWD,iBAAiE,IAAI;;;ACvBrE,SAAS,KAAAC,WAAS;AAClB,SAAoB,oBAAAC,yBAA6C;AAG1D,IAAM,oBAAoBC,IAAE,OAAO;AAAA,EACxC,mBAAmBA,IAAE,OAAO;AAAA,EAC5B,SAASA,IAAE,MAAMC,iBAAgB;AACnC,CAAC;AASD,iBAAqE,IAAI;;;AChBzE,SAAS,KAAAC,WAAS;AAClB,SAAS,SAAAC,cAAyB;AAG3B,IAAM,6BAA6BC,IAAE,OAAO;AAAA,EACjD,UAAUA,IAAE,OAAO;AAAA,EACnB,aAAaA,IACV,OAAO,EACP,SAAS,EACT,QAAQ,cAAc,EACtB,SAAS,qCAAqC;AAAA,EACjD,QAAQC;AACV,CAAC;AAeD;AAAA,EACE;AACF;;;AHhBO,IAAM,oBAAoBC,IAAE,OAAO;AAAA,EACxC,gBAAgBA,IAAE,MAAM,oBAAoB,EAAE,SAAS;AAAA,EACvD,oBAAoBA,IAAE,MAAM,iBAAiB,EAAE,SAAS;AAAA,EACxD,sBAAsBA,IAAE,MAAM,0BAA0B,EAAE,SAAS;AACrE,CAAC;AAUD,iBAAqE,IAAI;;;ANVlE,IAAM,eAAeC,IAAE,OAAO;AAAA,EACnC,YAAYA,IAAE,KAAK,CAAC,QAAQ,QAAQ,MAAM,CAAC,EAAE,SAAS;AAAA,EACtD,UAAUA,IAAE,KAAK,CAAC,YAAY,UAAU,CAAC,EAAE,SAAS;AAAA,EAEpD,MAAMA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC3B,UAAUA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EAC7C,UAAUA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EAC7C,kBAAkBA,IAAE,OAAO,EAAE,SAAS;AAAA,EACtC,qBAAqBA,IAAE,OAAO,EAAE,SAAS;AAAA,EACzC,cAAcA,IAAE,OAAO,EAAE,SAAS;AAAA,EAClC,SAASA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EAE5C,MAAMA,IAAE,QAAQ,EAAE,GAAGA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EAC1C,eAAeA,IAAE,KAAK,CAAC,OAAO,QAAQ,CAAC,EAAE,SAAS;AAAA,EAClD,YAAYA,IAAE,KAAK,CAAC,SAAS,UAAU,OAAO,SAAS,CAAC,EAAE,SAAS;AAAA,EACnE,gBAAgBA,IAAE,KAAK,CAAC,SAAS,UAAU,OAAO,SAAS,CAAC,EAAE,SAAS;AAAA,EACvE,SAASA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC9B,YAAYA,IAAE,QAAQ,EAAE,SAAS;AAAA,EACjC,KAAKA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC,EAAE,SAAS;AAC1C,CAAC;AAuBD,iBAA6D,IAAI;AA+C1D,IAAM,mBAAmBA,IAAE,OAAO;AAAA,EACvC,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,aAAaA,IAAE,KAAK,CAAC,cAAc,cAAc,CAAC,EAAE,SAAS;AAAA,EAC7D,YAAYA,IAAE,KAAK,CAAC,OAAO,gBAAgB,CAAC,EAAE,SAAS;AAAA,EACvD,oBAAoBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EACzC,OAAOA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EACrD,WAAWA,IAAE,KAAK,CAAC,oBAAoB,YAAY,CAAC,EAAE,SAAS;AAAA,EAC/D,aAAaA,IACV;AAAA,IACC,CAAC,MAAM,OAAO,MAAM,cAAc,MAAM;AAAA,EAC1C,EACC,SAAS;AAAA,EACZ,OAAOA,IAAE,QAAQ,EAAE,SAAS;AAC9B,CAAC;AAEM,IAAM,iBAAiBA,IAAE,MAAM;AAAA,EACpC;AAAA,EACAA,IAAE,QAAQ,kBAAkB;AAAA,EAC5BA,IAAE,QAAQ,YAAY;AAAA,EACtBA,IAAE,QAAQ,MAAM;AAAA,EAChBA,IAAE,QAAQ,YAAY;AAAA,EACtBA,IAAE,QAAQ,YAAY;AACxB,CAAC;AAqCM,IAAM,iBAAiB,kBAAkB,OAAO;AAAA,EACrD,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAUA,IAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,KAAKA,IAAE,IAAI,EAAE,SAAS;AAAA,EAEtB,GAAG,aAAa;AAAA,EAChB,UAAU,OAAO,SAAS;AAAA,EAC1B,WAAW,OAAO,SAAS;AAAA,EAC3B,UAAU,OAAO,SAAS;AAAA,EAC1B,WAAW,OAAO,SAAS;AAAA,EAC3B,WAAW,aAAa,SAAS;AAAA,EACjC,WAAW,aAAa,SAAS;AACnC,CAAC;AAEM,IAAM,cAAcA,IAAE,OAAoB,CAAC,MAAM,cAAc,CAAC;AAEhE,IAAM,uBAAuB,eAAe,OAAO;AAAA,EACxD,QAAQA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EACtD,aAAa,kBAAkB,SAAS;AAAA,EACxC,sBAAsBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC3C,0BAA0BA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC/C,iBAAiBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EACtC,mBAAmB,OAAO,SAAS;AAAA,EACnC,eAAe,OAAO,SAAS;AAAA,EAC/B,aAAa,YAAY,SAAS;AAAA,EAClC,eAAeA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EAC7D,YAAY,eAAe,SAAS;AACtC,CAAC;AAEM,IAAM,+BAA+B,qBAAqB,OAAO;AAAA,EACtE,YAAYA,IAAE,QAAQ,IAAI;AAC5B,CAAC;AAEM,IAAM,aAAaA,IAAE,mBAAmB,cAAc;AAAA,EAC3D,eAAe,OAAO,EAAE,YAAYA,IAAE,QAAQ,KAAK,EAAE,SAAS,EAAE,CAAC;AAAA,EACjE;AACF,CAAC;AAOD,iBAAyD,IAAI;AAC7D,iBAGE,IAAI;AAGN,iBAAiD,IAAI;;;AFvM9C,IAAM,aAAa,qBAAqB,OAAO;AAAA,EACpD,OAAOC,UAAS,SAAS;AAAA,EACzB,QAAQA,UAAS,SAAS;AAAA,EAC1B,SAASC,IAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EACjC,gBAAgBD,UAAS,SAAS;AAAA,EAClC,gBAAgBA,UAAS,SAAS;AACpC,CAAC;AAGD,iBAAiD,IAAI;;;AYzBrD,SAAS,YAAAE,iBAAgB;AAezB,SAAS,KAAAC,WAAS;AAoFlB,IAAM,mBAAmBA,IACtB,OAAO,EACP,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS,CAAC,EACjC,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC;AAEzB,IAAM,kBAAkBA,IACrB,OAAoB,EACpB,KAAKA,IAAE,OAAOA,IAAE,OAAO,GAAG,gBAAgB,CAAC;AAEvC,IAAM,gBAAgBA,IAAE;AAAA,EAC7BA,IAAE,OAAO;AAAA,EACTA,IAAE,OAAO,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS,CAAC,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC;AACtE;AAEA,iBAA+D,IAAI;AAE5D,IAAM,YAAY,qBAAqB,OAAO;AAAA,EACnD,wBAAwBA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAW,cAAc,SAAS;AAAA,EAClC,yBAAyBA,IAAE,MAAMA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAAA,EAC/D,yBAAyBA,IAAE,MAAMA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAAA,EAC/D,mBAAmB,yBAAwB,SAAS;AAAA,EACpD,oBAAoB,yBAAwB,SAAS;AAAA,EACrD,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAeC,UAAS,SAAS;AAAA,EACjC,UAAUA,UAAS,SAAS;AAAA,EAC5B,WAAWA,UAAS,SAAS;AAAA,EAC7B,2BAA2BD,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChD,aAAa,gBAAgB,SAAS;AACxC,CAAC;AAKM,IAAM,WAAW;AAKxB,iBAAyD,IAAI;;;AC1I7D,SAAS,YAAAE,iBAAgB;AAczB,SAAS,KAAAC,WAAS;AAaX,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,wBAAwBA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAWA,IACR,OAAOA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC,GAAGA,IAAE,OAAO,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC,CAAC,EACpE,SAAS;AAAA,EACZ,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAeC,UAAS,SAAS;AAAA,EACjC,UAAUA,UAAS,SAAS;AAAA,EAC5B,WAAWA,UAAS,SAAS;AAAA,EAC7B,cAAcD,IAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AAAA,EACjD,oBAAoB,yBAAyB,SAAS;AACxD,CAAC;AAGD,iBAAmD,IAAI;;;ACzCvD,SAAS,YAAAE,iBAAgB;AAKzB,SAAS,KAAAC,WAAS;AA8DlB,IAAM,0BAA0BA,IAC7B,OAAiC,EACjC,UAAU,CAAC,MAAM;AAChB,MAAI,MAAM;AAAW,WAAO;AAC5B,SAAOC,UAAS,MAAM,CAAC;AACzB,CAAC;AAEI,IAAM,kBAAkBD,IAC5B,MAAM;AAAA,EACL,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,QAAQ;AAAA,IACzB,cAAcC;AAAA,IACd,eAAeA;AAAA,IACf,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMD,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,MAAM;AAAA,IACvB,YAAYC;AAAA,IACZ,aAAaA;AAAA,IACb,WAAW;AAAA,IACX,YAAY;AAAA,IACZ,YAAYA,UAAS,SAAS,EAAE,SAAS,0BAA0B;AAAA,IACnE,aAAaA,UAAS,SAAS,EAAE,SAAS,2BAA2B;AAAA,IACrE,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMD,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,MAAM;AAAA,IACvB,YAAYC;AAAA,IACZ,aAAaA;AAAA,IACb,WAAW;AAAA,IACX,YAAY;AAAA,IACZ,YAAYA,UAAS,SAAS,EAAE,SAAS,0BAA0B;AAAA,IACnE,aAAaA,UAAS,SAAS,EAAE,SAAS,2BAA2B;AAAA,IACrE,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eACG,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EACvC,OAAO;AAAA,IACN,MAAMD,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,cAAcC;AAAA,IACd,cAAcA;AAAA,IACd,eAAeA;AAAA,IACf,WAAWD,IAAE,QAAQ,QAAQ,EAAE,SAAS;AAAA,IACxC,UAAUA,IAAE,QAAQ,MAAM,EAAE,SAAS;AAAA,IACrC,OAAOA,IAAE,QAAQ,yBAAyB,EAAE,SAAS;AAAA,IACrD,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC,EACA;AAAA,IACC,CAAC,SAAS;AACR,aAAO,KAAK,UAAU,4BAClB,KAAK,gBAAgB,KAAK,gBAAgB,KAAK,gBAC/C;AAAA,IACN;AAAA,IACA;AAAA,MACE,SAAS;AAAA,IACX;AAAA,EACF;AACJ,CAAC,EACA,OAAO,CAAC,MAAM;AACb,MAAI,gBAAgB,KAAK,EAAE,eAAe,QAAW;AACnD,MAAE,cAAc,EAAE;AAAA,EACpB;AACA,MAAI,iBAAiB,KAAK,EAAE,gBAAgB,QAAW;AACrD,MAAE,eAAe,EAAE;AAAA,EACrB;AACA,SAAO;AACT,CAAC;AAIH,iBAA2D,IAAI;;;AC5I/D,SAAS,kBAAkB;AAO3B,SAAS,KAAAE,WAAS;AAUX,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AAAA,EAEA,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAUA,IAAE,OAAO,EAAE,SAAS;AAAA,EAE9B,aAAaA,IAAE,OAAO,EAAE,SAAS;AAAA,EACjC,YAAYA,IAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AACM,IAAM,eAAe;AAG5B,iBAAuD,IAAI;;;AC7B3D,SAAS,cAAAC,mBAAkB;AAO3B,SAAS,KAAAC,WAAS;AASX,IAAM,qBAAqB,qBAAqB,OAAO;AAAA,EAC5D,eAAeC;AAAA,EACf,YAAYD,IAAE,KAAK,CAAC,WAAW,WAAW,CAAC,EAAE,SAAS;AACxD,CAAC;AAGD,iBAAiE,IAAI;;;ACtBrE,SAAS,WAAW,mBAAmB;AAOvC,SAAS,KAAAE,WAAS;AAUX,IAAM,eAAe,qBAAqB,OAAO;AAAA,EACtD;AAAA,EACA,iBAAiB;AAAA,EACjB,YAAYA,IAAE,KAAK,CAAC,WAAW,UAAU,CAAC,EAAE,SAAS;AACvD,CAAC;AACM,IAAM,cAAc;AAG3B,iBAAqD,IAAI;;;ACzBzD,SAAS,aAAAC,YAAW,eAAAC,oBAAmB;AAMvC,SAAS,KAAAC,WAAS;AAUX,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD,WAAWC;AAAA,EACX,iBAAiBC;AAAA,EACjB,YAAYF,IAAE,KAAK,CAAC,aAAa,cAAc,iBAAiB,CAAC,EAAE,SAAS;AAC9E,CAAC;AAGD,iBAAyD,IAAI;;;ACvB7D,SAAS,YAAAG,iBAAgB;AACzB,SAAS,KAAAC,WAAS;AAiBX,IAAM,kBAAkB,WAAW,OAAO;AAAA,EAC/C,cAAcC,IAAE,OAAO,EAAE,SAAS;AAAA,EAClC,eAAeA,IAAE,OAAO,EAAE,SAAS;AAAA,EACnC,aAAaA,IAAE,OAAO,EAAE,SAAS;AAAA,EACjC,gBAAgBA,IAAE,OAAO,EAAE,SAAS;AAAA,EACpC,UAAUA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACvC,WAAWA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACxC,SAASA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACtC,YAAYA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACzC,UAAUC,UAAS,SAAS;AAAA,EAC5B,YAAYD,IAAE,QAAQ,EAAE,SAAS;AACnC,CAAC;AAGD,iBAA2D,IAAI;;;AChC/D,SAAS,eAAAE,cAAa,eAAe;AAOrC,SAAS,KAAAC,WAAS;AAcX,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD,aAAAC;AAAA,EACA,kBAAkB,QAAQ,SAAS;AAAA,EACnC,gBAAgBD,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EACpD,WAAWA,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAC/C,eAAeA,IAAE,OAAO,EAAE,SAAS;AAAA,EACnC,cAAcA,IAAE,OAAO,EAAE,SAAS;AAAA,EAClC,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAUA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC9B,0BAA0BA,IAAE,OAAO,EAAE,SAAS;AAChD,CAAC;AACM,IAAM,gBAAgB;AAE7B,iBAAiE,IAAI;;;AClCrE,SAAS,KAAAE,WAAS;AAOX,IAAM,WAAWC,IAAE,OAAO;AAAA,EAC/B,MAAMA,IAAE,OAAO;AACjB,CAAC;AAGD,iBAA6C,IAAI;;;ACXjD,SAAS,KAAAC,WAAS;AAQX,IAAM,yBAAyBA,IAAE,OAAO;AAAA,EAC7C,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,SAASA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC9B,SAASA,IAAE,QAAQ,EAAE,SAAS;AAChC,CAAC;AAMD,iBAAyE,IAAI;;;ACnB7E,OAAkB;AAIlB,SAAS,YAAAC,YAAU,UAAAC,eAAc;;;ACDjC,SAAS,KAAAC,WAAS;AAkFX,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOC;AAAA,EACP,MAAMD,IAAE,OAAO;AAAA,EACf,OAAOA,IAAE,OAAO;AAAA,EAEhB,YAAYA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgBA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOC;AAAA,EACP,KAAKD,IAAE,OAAO;AAAA,EACd,QAAQA,IAAE,OAAO;AAAA,EAEjB,YAAYA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgBA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAKA,IAAE,MAAMA,IAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAKA,IAAE,MAAMA,IAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,kBAAkBA,IAAE,MAAM;AAAA,EACrC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAmE,IAAI;;;ACnIvE,SAAS,KAAAE,WAAS;AA6CX,IAAM,kBAAkB,eAC5B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOC,IAAE,QAAQ,MAAM;AAAA,EACvB,OAAOC;AAAA,EACP,QAAQA;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA2D,IAAI;AAExD,IAAM,yBAAyB,eACnC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOD,IAAE,QAAQ,cAAc;AAAA,EAC/B,OAAOC;AAAA,EACP,QAAQA;AAAA,EACR,aAAaD,IAAE,OAAO;AAAA,EACtB,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAAyE,IAAI;AAEtE,IAAM,oBAAoB,eAC9B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOA,IAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQC;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA+D,IAAI;AAE5D,IAAM,kBAAkB,eAC5B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOD,IAAE,QAAQ,MAAM;AAAA,EACvB,OAAOC;AAAA,EACP,QAAQA;AAAA,EACR,QAAQA;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA2D,IAAI;AAExD,IAAM,cAAcD,IAAE,MAAM;AAAA,EACjC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAmD,IAAI;;;ACrGvD,SAA0B,KAAAE,WAAS;AAoB5B,IAAM,uBAAuB,eACjC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOC,IAAE,QAAQ,MAAM;AAAA,EACvB,OAAOC;AAAA,EACP,QAAQA;AACV,CAAC;AAEH,iBAAqE,IAAI;AAElE,IAAM,yBAAyB,eACnC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOD,IAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQC;AACV,CAAC;AAEH,iBAAyE,IAAI;AAEtE,IAAM,mBAAmBD,IAAE,MAAM;AAAA,EACtC;AAAA,EACA;AACF,CAAC;AAGD,iBAA6D,IAAI;;;AC/CjE,SAAS,KAAAE,WAAS;AAWX,IAAM,YAAY,eACtB,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,MAAMC,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAUC,WAAS,SAAS;AAAA,EAC5B,QAAQA,WAAS,SAAS;AAC5B,CAAC,EACA,UAAU,CAAC,OAAO;AAAA,EACjB,GAAG;AAAA,EACH,UAAU,EAAE,YAAY,IAAI,EAAE;AAAA,EAC9B,QAAQ,EAAE,UAAU,EAAE,WAAY;AACpC,EAAE;AAIJ,iBAA+C,IAAI;;;AC1BnD,SAAS,YAAAC,YAAU,oBAAAC,yBAAwB;AAC3C,SAAS,KAAAC,WAAS;AAGX,IAAM,UAAUC,IAAE,MAAM;AAAA,EAC7BA,IAAE,OAAO;AAAA,EACTA,IAAE;AAAA,IAA0C,CAAC,MAC3C,QAAQ,EAAE,eAAe;AAAA,EAC3B;AACF,CAAC;AAED,IAAM,iBAAiBA,IAAE,OAAO;AAAA,EAC9B,KAAKA,IAAE,OAAO,EAAE,SAAS;AAAA,EACzB,WAAWC,WAAS,SAAS;AAAA,EAC7B,qBAAqBD,IAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EAC7C,eAAeA,IAAE,MAAME,iBAAgB,EAAE,SAAS;AAAA,EAClD,iBAAiBF,IAAE,OAAO,EAAE,SAAS;AAAA,EACrC,WAAWC,WAAS,SAAS;AAC/B,CAAC;AAEM,IAAM,aAAaD,IAAE,MAAM;AAAA,EAChC,eAAe,OAAO;AAAA,IACpB,MAAMA,IAAE,MAAM,OAAO;AAAA,EACvB,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,MAAM;AAAA,IACN,IAAI;AAAA,EACN,CAAC;AACH,CAAC;;;AC5BD,SAAwB,aAAAG,kBAAiB;AAEzC,SAAS,KAAAC,WAAS;AAgBX,IAAM,iBAAiBA,IAAE,OAAO;AAAA,EACrC,eAAeC,WAAU,QAAQ,KAAK,EAAE,SAAS;AACnD,CAAC;AAID,iBAAyD,IAAI;;;ACxB7D,SAAS,KAAAC,WAAS;AAUlB,IAAM,WAAWC,IACd,OAAO,EACP,GAAGA,IAAE,OAAO,EAAE,SAAS,KAAK,CAAC,EAC7B,UAAU,CAAC,MAAM;AAChB,MAAI,OAAO,MAAM,UAAU;AACzB,UAAM,YAAY,EAAE,QAAQ,OAAO,EAAE;AACrC,UAAM,MAAM,OAAO,WAAW,SAAS;AACvC,QAAI,OAAO,MAAM,GAAG,GAAG;AACrB,YAAM,IAAI,MAAM,kBAAkB;AAAA,IACpC;AACA,WAAO;AAAA,EACT;AACA,SAAO;AACT,CAAC,EACA,SAAS,yBAAyB;AAM9B,IAAM,eAAe,qBAAqB,OAAO;AAAA,EACtD,UAAU,SAAS,SAAS;AAC9B,CAAC;AACM,IAAM,cAAc;AAE3B,iBAA6D,IAAI;;;ACnCjE,SAAS,YAAAC,kBAAgB;AAMzB,SAAS,KAAAC,WAAS;AAsDX,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD,UAAUA,IAAE,OAAO;AAAA,EACnB,OAAOC,WAAS,SAAS;AAAA,EACzB,oBAAoBD,IAAE,KAAK,CAAC,MAAM,QAAQ,QAAQ,OAAO,CAAC,EAAE,SAAS;AAAA,EACrE,QAAQA,IAAE,KAAK,CAAC,QAAQ,QAAQ,CAAC,EAAE,SAAS,EAAE,QAAQ,MAAM;AAAA,EAC5D,yBAAyBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC9C,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,cAAcC,WAAS,SAAS;AAAA,EAChC,gBAAgBA,WAAS,SAAS;AAAA,EAClC,WAAWD,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACxC,iBAAiBA,IAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AACtD,CAAC;AAGD,iBAAyD,IAAI;;;AC1E7D,SAAS,KAAAE,WAAS;AAGlB,SAAS,YAAAC,iBAAgB;AAUlB,IAAM,gBAAgBC,IAAE,OAAO;AAAA,EACpC,KAAKA,IAAE,OAAO,EAAE,SAAS;AAAA,EACzB,MAAMC,WAAS,SAAS;AAAA,EACxB,MAAMA,WAAS,SAAS;AAAA,EACxB,aAAaF,UAAS,SAAS;AAAA,EAC/B,YAAYC,IAAE,KAAK,CAAC,QAAQ,MAAM,SAAS,MAAM,CAAC,EAAE,SAAS;AAC/D,CAAC;AAGD,iBAAuD,IAAI;;;ACrB3D,OAAkB;AAMX,IAAM,kBAAkB,UAAU,OAAO,CAAC,CAAC;AAElD,iBAAmE,IAAI;;;ACFhE,IAAM,kBAAkB;AAG/B,iBAA2D,IAAI;;;ACL/D,SAAS,KAAAE,WAAS;AAMX,IAAM,kBAAkB,qBAAqB,OAAO;AAAA,EACzD,MAAMA,IAAE,KAAK,CAAC,OAAO,OAAO,OAAO,QAAQ,QAAQ,CAAC;AACtD,CAAC;AAEM,IAAM,iBAAiB;AAAA,EAC5B;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAGA,iBAA2D,IAAI;;;ACpB/D,SAAS,KAAAC,WAAS;AAOX,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,aAAaA,IAAE,KAAK,CAAC,KAAK,GAAG,CAAC;AAAA,EAC9B,YAAYA,IAAE,KAAK,CAAC,eAAe,WAAW,CAAC;AACjD,CAAC;AAEM,IAAM,aAAa;AAAA,EACxB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAGA,iBAAmD,IAAI;;;AC3BvD,SAAS,kBAAkB;AAIpB,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AACF,CAAC;AACM,IAAM,eAAe;;;ACF5B,SAAS,KAAAC,WAAS;AAGlB,IAAM,sBAAsBC,IAAE,KAAK;AAAA,EACjC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,IAAMC,oBAAmBD,IACtB,OAAO,EACP,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS,CAAC,EACjC,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC;AAEzB,IAAME,mBAAkBF,IAAE,OAAO,qBAAqBC,iBAAgB;AAE/D,IAAM,aAAa,qBAAqB,OAAO;AAAA,EACpD,aAAaC,iBAAgB,SAAS;AACxC,CAAC;AAEM,IAAM,YAAY;AAczB,iBAAiD,IAAI;;;ACzCrD,SAAS,KAAAC,WAAS;AAEX,IAAM,WAAW,qBAAqB,OAAO;AAAA,EAClD,OAAOA,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AACM,IAAM,UAAU;;;ACAvB,SAAS,KAAAC,WAAS;AAWX,IAAM,cAAc,qBACxB,OAAO;AAAA,EACN,MAAMA,IAAE,KAAK,CAAC,QAAQ,QAAQ,QAAQ,MAAM,CAAC,EAAE,SAAS;AAAA,EACxD,kBAAkBA,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EACtD,MAAMA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC3B,MAAMA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC3B,MAAMA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC3B,MAAMA,IAAE,QAAQ,EAAE,SAAS;AAC7B,CAAC,EACA,UAAU,CAAC,UAAU;AACpB,QAAM,eAA4B,EAAE,GAAG,MAAM;AAE7C,MAAI,aAAa,MAAM;AACrB,iBAAa,OAAO;AAAA,EACtB,WAAW,aAAa,MAAM;AAC5B,iBAAa,OAAO;AAAA,EACtB,WAAW,aAAa,MAAM;AAC5B,iBAAa,OAAO;AAAA,EACtB,WAAW,aAAa,MAAM;AAC5B,iBAAa,OAAO;AAAA,EACtB;AAEA,UAAQ,aAAa,MAAM;AAAA,IACzB,KAAK;AACH,mBAAa,OAAO;AACpB;AAAA,IACF,KAAK;AACH,mBAAa,OAAO;AACpB;AAAA,IACF,KAAK;AACH,mBAAa,OAAO;AACpB;AAAA,IACF,KAAK;AACH,mBAAa,OAAO;AACpB;AAAA,EACJ;AAEA,SAAO;AACT,CAAC;AAGH,iBAAmD,IAAI;;;AC1DvD,SAAS,UAAAC,eAAc;AAEvB,SAAS,KAAAC,WAAS;AAEX,IAAM,2BAA2B,eAAe,OAAO;AAAA,EAC5D,MAAMA,IAAE,OAAO;AAAA,EACf,iBAAiBA,IACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAMA,IAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAUC,QAAO,SAAS;AAAA,EAC1B,OAAOD,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;;;ACZD,SAAS,UAAAE,SAAQ,oBAAAC,yBAAwB;AAEzC,SAAS,KAAAC,WAAS;AAEX,IAAM,2BAA2B,eACrC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAOA,IAAE,MAAMC,iBAAgB;AAAA,EAC/B,aAAaC,QAAO,SAAS;AAAA,EAC7B,OAAOF,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;;;ACVH,SAAS,YAAAG,YAAU,oBAAAC,yBAAwB;AAC3C,SAAS,KAAAC,WAAS;AAEX,IAAM,gBAAgBA,IAAE,OAAO;AAAA,EACpC,OAAOA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,WAAWF,WAAS,SAAS;AAAA,EAC7B,OAAOE,IAAE,MAAMD,iBAAgB;AACjC,CAAC;;;ACPD,SAAS,YAAAE,YAAU,aAAAC,kBAAiB;AAI7B,IAAM,WAAW,kBAAkB,OAAO;AAAA,EAC/C,WAAWC;AAAA,EACX,SAASA;AAAA,EACT,cAAcC;AAAA,EACd,eAAeA;AACjB,CAAC;;;ACTD,SAAS,YAAAC,kBAAgB;AAEzB,SAAS,KAAAC,WAAS;AAEX,IAAM,kBAAkBA,IAAE,MAAM;AAAA,EACrC,eAAe,KAAK,EAAE,aAAa,KAAK,CAAC,EAAE,OAAO;AAAA,IAChD,OAAOA,IAAE,QAAQ,QAAQ;AAAA,IACzB,QAAQC;AAAA,EACV,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,OAAOD,IAAE,QAAQ,MAAM;AAAA,IACvB,OAAOC;AAAA,IACP,QAAQA;AAAA,EACV,CAAC;AACH,CAAC;;;ACdD,SAAS,WAAAC,gBAAe;AAIjB,IAAM,mBAAmB,qBAAqB,OAAO;AAAA,EAC1D,SAAAC;AACF,CAAC;;;ACND,SAAS,YAAAC,kBAAgB;AACzB,SAAS,KAAAC,WAAS;AAEX,IAAM,oBAAoBA,IAAE,OAAO;AAAA,EACxC,MAAMD;AAAA,EACN,MAAMA;AAAA,EACN,OAAOA;AAAA,EACP,QAAQA;AACV,CAAC;;;ACRD,SAAS,YAAAE,kBAAgB;AACzB,SAAS,KAAAC,WAAS;AAEX,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EACzC,IAAID;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AACN,CAAC;;;ACRD,SAAS,YAAAE,kBAAgB;AACzB,SAAS,KAAAC,WAAS;AAEX,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EACzC,MAAMD;AAAA,EACN,MAAMA;AAAA,EACN,MAAMC,IAAE,OAAO;AACjB,CAAC;;;ACPD,SAAS,SAAAC,cAAa;AACtB,SAAS,KAAAC,WAAS;AAEX,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EACzC,QAAQA,IAAE,MAAMD,MAAK;AAAA,EACrB,UAAUC,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAC9C,WAAWA,IAAE,KAAK,CAAC,OAAO,MAAM,CAAC,EAAE,SAAS;AAC9C,CAAC;;;ACPD,SAAS,UAAAC,eAAc;AAEvB,SAAS,KAAAC,WAAS;AAEX,IAAM,sBAAsB,eAAe,OAAO;AAAA,EACvD,MAAMA,IAAE,OAAO;AAAA,EACf,iBAAiBA,IACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAMA,IAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAUC,QAAO,SAAS;AAC5B,CAAC;;;ACXD,SAAS,UAAAC,SAAQ,oBAAAC,yBAAwB;AAEzC,SAAS,KAAAC,WAAS;AAEX,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAOA,IAAE,MAAMC,iBAAgB;AAAA,EAC/B,aAAaC,QAAO,SAAS;AAC/B,CAAC;;;ACTH,SAAS,YAAAC,kBAAgB;AAIlB,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,aAAaC;AAAA,EACb,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AACN,CAAC;;;ACZH,SAAS,YAAAC,kBAAgB;AAEzB,SAAS,KAAAC,WAAS;AAEX,IAAM,sBAAsB,eAChC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAUA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAaC,WAAS,SAAS;AAAA,EAC/B,OAAOA;AAAA,EACP,QAAQA;AACV,CAAC;;;ACZH,SAAS,YAAAC,kBAAgB;AAEzB,SAAS,KAAAC,WAAS;AAEX,IAAM,wBAAwB,eAClC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAUA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAaC,WAAS,SAAS;AAAA,EAC/B,QAAQA;AACV,CAAC;;;ACXH,SAAS,YAAAC,YAAU,aAAAC,YAAW,oBAAAC,yBAAwB;AACtD,SAAS,KAAAC,WAAS;AAEX,IAAM,sBAAsBA,IAAE,OAAO;AAAA,EAC1C,GAAGH;AAAA,EACH,GAAGA;AAAA,EACH,KAAKG,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC1B,SAASF,WAAU,SAAS;AAC9B,CAAC;AAEM,IAAM,iBAAiBE,IAAE,OAAO;AAAA,EACrC,KAAKA,IACF,OAAO,EACP,SAAS,EACT;AAAA,IACC;AAAA,EACF;AAAA,EACF,OAAOA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,QAAQD,kBAAiB,GAAG,mBAAmB,EAAE,SAAS;AAAA,EAC1D,SAASC,IACN,MAAMD,iBAAgB,EACtB,GAAGC,IAAE,MAAM,mBAAmB,CAAC,EAC/B,SAAS;AAAA,EACZ,YAAYA,IAAE,OAAO,EAAE,SAAS;AAClC,CAAC;;;ACtBD,SAAS,KAAAC,WAAS;AAEX,IAAM,YAAY,kBAAkB,OAAO;AAAA,EAChD,MAAMA,IAAE,OAAO;AAAA,EACf,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,SAASA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACtC;AACF,CAAC;;;ACFD,SAAS,KAAAC,WAAS;AAYX,IAAM,iBAAiBA,IAAE,OAAO;AAAA,EACrC,aAAa,YAAY,SAAS;AAAA,EAClC,YAAY,eAAe,SAAS;AAAA,EACpC,gBAAgBA,IAAE,OAAO,EAAE,SAAS;AAAA,EACpC,oBAAoBA,IAAE,OAAO,EAAE,SAAS;AAC1C,CAAC;AAED,iBAAiE,IAAI;","names":["z","z","distance","z","z","z","z","z","z","distance","z","distance","z","distance","distance","distance","z","z","z","z","z","z","z","z","z","z","z","z","z","z","point","z","point","z","route_hint_point","z","route_hint_point","z","point","z","point","z","z","distance","z","distance","z","distance","distance","z","distance","distance","z","distance","z","resistance","z","resistance","z","frequency","capacitance","z","frequency","capacitance","distance","z","z","distance","capacitance","z","capacitance","z","z","z","distance","length","z","distance","z","z","distance","z","z","distance","z","z","distance","distance","route_hint_point","z","z","distance","route_hint_point","layer_ref","z","layer_ref","z","z","distance","z","distance","z","rotation","z","distance","z","z","z","z","connectionTarget","connectionsProp","z","z","length","z","length","length","route_hint_point","z","route_hint_point","length","distance","route_hint_point","z","distance","layer_ref","layer_ref","distance","distance","z","distance","voltage","voltage","distance","z","distance","z","distance","z","point","z","length","z","length","length","route_hint_point","z","route_hint_point","length","distance","distance","distance","z","distance","distance","z","distance","distance","layer_ref","route_hint_point","z","z","z"]}

package/lib/components/chip.ts

@@ -73,7 +73,9 @@ export type ChipPinLabels<T extends (props: ChipProps<any>) => any> =
     ? Props extends ChipProps<infer PinLabelMap>
       ? PinLabelMap extends PinLabelsProp
         ? PinLabelFromPinLabelMap<PinLabelMap>
-        : never
+        : PinLabelMap extends string
+          ? PinLabelMap
+          : never
       : never
     : never
 

package/lib/components/platedhole.ts

@@ -23,6 +23,11 @@ export interface OvalPlatedHoleProps
   holeWidth: number | string
   holeHeight: number | string
   portHints?: PortHints
+
+  /** @deprecated use holeWidth */
+  innerWidth?: number | string
+  /** @deprecated use holeHeight */
+  innerHeight?: number | string
 }
 
 export interface PillPlatedHoleProps
@@ -33,6 +38,12 @@ export interface PillPlatedHoleProps
   outerHeight: number | string
   holeWidth: number | string
   holeHeight: number | string
+
+  /** @deprecated use holeWidth */
+  innerWidth?: number | string
+  /** @deprecated use holeHeight */
+  innerHeight?: number | string
+
   portHints?: PortHints
 }
 
@@ -54,55 +65,76 @@ export type PlatedHoleProps =
   | PillPlatedHoleProps
   | CircularHoleWithRectPlatedProps
 
-export const platedHoleProps = z.union([
-  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({
-    name: z.string().optional(),
-    shape: z.literal("circle"),
-    holeDiameter: distance,
-    outerDiameter: distance,
-    portHints: portHints.optional(),
-  }),
-  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({
-    name: z.string().optional(),
-    shape: z.literal("oval"),
-    outerWidth: distance,
-    outerHeight: distance,
-    holeWidth: distance,
-    holeHeight: distance,
-    portHints: portHints.optional(),
-  }),
-  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({
-    name: z.string().optional(),
-    shape: z.literal("pill"),
-    outerWidth: distance,
-    outerHeight: distance,
-    holeWidth: distance,
-    holeHeight: distance,
-    portHints: portHints.optional(),
-  }),
-  pcbLayoutProps
-    .omit({ pcbRotation: true, layer: true })
-    .extend({
+const distanceHiddenUndefined = z
+  .custom<z.input<typeof distance>>()
+  .transform((a) => {
+    if (a === undefined) return undefined
+    return distance.parse(a)
+  })
+
+export const platedHoleProps = z
+  .union([
+    pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({
       name: z.string().optional(),
+      shape: z.literal("circle"),
       holeDiameter: distance,
-      rectPadWidth: distance,
-      rectPadHeight: distance,
-      holeShape: z.literal("circle").optional(),
-      padShape: z.literal("rect").optional(),
-      shape: z.literal("circularHoleWithRectPad").optional(),
+      outerDiameter: distance,
+      portHints: portHints.optional(),
+    }),
+    pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({
+      name: z.string().optional(),
+      shape: z.literal("oval"),
+      outerWidth: distance,
+      outerHeight: distance,
+      holeWidth: distanceHiddenUndefined,
+      holeHeight: distanceHiddenUndefined,
+      innerWidth: distance.optional().describe("DEPRECATED use holeWidth"),
+      innerHeight: distance.optional().describe("DEPRECATED use holeHeight"),
+      portHints: portHints.optional(),
+    }),
+    pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({
+      name: z.string().optional(),
+      shape: z.literal("pill"),
+      outerWidth: distance,
+      outerHeight: distance,
+      holeWidth: distanceHiddenUndefined,
+      holeHeight: distanceHiddenUndefined,
+      innerWidth: distance.optional().describe("DEPRECATED use holeWidth"),
+      innerHeight: distance.optional().describe("DEPRECATED use holeHeight"),
       portHints: portHints.optional(),
-    })
-    .refine(
-      (prop) => {
-        return prop.shape === "circularHoleWithRectPad"
-          ? prop.holeDiameter && prop.rectPadWidth && prop.rectPadHeight
-          : true
-      },
-      {
-        message: "Missing required fields for circularHoleWithRectPad",
-      },
-    ),
-])
+    }),
+    pcbLayoutProps
+      .omit({ pcbRotation: true, layer: true })
+      .extend({
+        name: z.string().optional(),
+        holeDiameter: distance,
+        rectPadWidth: distance,
+        rectPadHeight: distance,
+        holeShape: z.literal("circle").optional(),
+        padShape: z.literal("rect").optional(),
+        shape: z.literal("circularHoleWithRectPad").optional(),
+        portHints: portHints.optional(),
+      })
+      .refine(
+        (prop) => {
+          return prop.shape === "circularHoleWithRectPad"
+            ? prop.holeDiameter && prop.rectPadWidth && prop.rectPadHeight
+            : true
+        },
+        {
+          message: "Missing required fields for circularHoleWithRectPad",
+        },
+      ),
+  ])
+  .refine((a) => {
+    if ("innerWidth" in a && a.innerWidth !== undefined) {
+      a.holeWidth ??= a.innerWidth
+    }
+    if ("innerHeight" in a && a.innerHeight !== undefined) {
+      a.holeHeight ??= a.innerHeight
+    }
+    return a
+  })
 
 type InferredPlatedHoleProps = z.input<typeof platedHoleProps>
 

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@tscircuit/props",
-  "version": "0.0.167",
+  "version": "0.0.169",
   "description": "Props for tscircuit builtin component types",
   "main": "dist/index.js",
   "type": "module",