@tscircuit/props 0.0.144 → 0.0.145

package/dist/index.d.ts

@@ -6927,8 +6927,10 @@ declare const resistorProps: z.ZodObject<z.objectUtil.extendShape<z.objectUtil.e
 }>;
 declare const resistorPins: readonly ["pin1", "left", "pin2", "right"];
 
+type PotentiometerPinVariant = "two_pin" | "three_pin";
 interface PotentiometerProps extends CommonComponentProps {
     maxResistance: number | string;
+    pinVariant?: PotentiometerPinVariant;
 }
 declare const potentiometerProps: z.ZodObject<z.objectUtil.extendShape<z.objectUtil.extendShape<z.objectUtil.extendShape<{
     pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
@@ -7188,6 +7190,7 @@ declare const potentiometerProps: z.ZodObject<z.objectUtil.extendShape<z.objectU
     symbolName: z.ZodOptional<z.ZodString>;
 }>, {
     maxResistance: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+    pinVariant: z.ZodOptional<z.ZodEnum<["two_pin", "three_pin"]>>;
 }>, "strip", z.ZodTypeAny, {
     name: string;
     maxResistance: number;
@@ -7256,6 +7259,7 @@ declare const potentiometerProps: z.ZodObject<z.objectUtil.extendShape<z.objectU
     } | undefined;
     children?: any;
     symbolName?: string | undefined;
+    pinVariant?: "two_pin" | "three_pin" | undefined;
 }, {
     name: string;
     maxResistance: string | number;
@@ -7326,8 +7330,8 @@ declare const potentiometerProps: z.ZodObject<z.objectUtil.extendShape<z.objectU
     } | undefined;
     children?: any;
     symbolName?: string | undefined;
+    pinVariant?: "two_pin" | "three_pin" | undefined;
 }>;
-declare const potentiometerPins: readonly ["pin1", "left", "pin2", "right"];
 
 type PinVariant = "2pin" | "4pin";
 interface CrystalProps extends CommonComponentProps {
@@ -14974,4 +14978,4 @@ declare const portProps: z.ZodObject<z.objectUtil.extendShape<{
 }>;
 type PortProps = z.input<typeof portProps>;
 
-export { type AutorouterConfig, type AutorouterProp, type BaseGroupProps, type BaseManualEditEvent, type BaseManualEditEventInput, type BatteryProps, type BoardProps, type CadModelBase, type CadModelJscad, type CadModelObj, type CadModelProp, type CadModelStl, type CapacitorProps, type ChipProps, type CirclePlatedHoleProps, type CircleSmtPadProps, type CircleSolderPasteProps, type CommonComponentProps, type CommonLayoutProps, type ComponentProps, type ConstrainedLayoutProps, type ConstraintProps, type CrystalProps, type DiodeProps, type Direction, type DirectionAlongEdge, type EditPcbComponentLocationEvent, type EditPcbComponentLocationEventInput, type EditSchematicComponentLocationEvent, type EditSchematicComponentLocationEventInput, type EditTraceHintEvent, type EditTraceHintEventInput, type FabricationNotePathProps, type FabricationNoteTextProps, type Footprint, type FootprintProps, type FootprintPropsInput, type FootprintSoupElements, type GroupProps, type HoleProps, type InductorProps, type InferredChipProps, type InferredConstrainedLayoutProps, type InferredHoleProps, type InferredSmtPadProps, type InferredSolderPasteProps, type InferredSwitchProps, type JumperProps, type LedProps, type ManualEditEvent, type ManualEditEventInput, type ManualEditsFile, type ManualEditsFileInput, type ManualPcbPlacement, type ManualPcbPlacementInput, type ManualSchematicPlacement, type ManualSchematicPlacementInput, type ManualTraceHint, type ManualTraceHintInput, type MosfetProps, type NetAliasProps, type NetProps, type NonSubcircuitGroupProps, type OvalPlatedHoleProps, type PartsEngine, type PcbKeepoutProps, type PcbLayoutProps, type PcbRouteCache, type PcbSameXConstraint, type PcbSameYConstraint, type PcbTraceProps, type PcbXDistConstraint, type PcbYDistConstraint, type PillPlatedHoleProps, type PillSmtPadProps, type PinHeaderProps, type PinLabels, type PinSideDefinition, type PinVariant, type PlatedHoleProps, type PortHints, type PortProps, type PotentiometerProps, type PowerSourceProps, type PushButtonProps, type RectSmtPadProps, type RectSolderPasteProps, type ResistorProps, type ResonatorPinVariant, type ResonatorProps, type RotatedRectSmtPadProps, type SchematicBoxProps, type SchematicLineProps, type SchematicPathProps, type SchematicPinArrangement, type SchematicPinArrangementWithPinCounts, type SchematicPinArrangementWithSides, type SchematicPinArrangementWithSizes, type SchematicPinStyle, type SchematicPortArrangement, type SchematicPortArrangementWithPinCounts, type SchematicPortArrangementWithSides, type SchematicPortArrangementWithSizes, type SchematicTextProps, type SilkscreenCircleProps, type SilkscreenLineProps, type SilkscreenPathProps, type SilkscreenRectProps, type SilkscreenTextProps, type SmtPadProps, type SolderPasteProps, type SubcircuitGroupProps, type SubcircuitGroupPropsWithBool, type SubcircuitProps, type SupplierName, type SupplierPartNumbers, type SupplierProps, type SwitchProps, type TraceHintProps, type TraceProps, type TransistorProps, type ViaProps, autorouterConfig, autorouterProp, baseGroupProps, base_manual_edit_event, batteryPins, batteryProps, boardProps, bugProps, cadModelBase, cadModelJscad, cadModelObj, cadModelProp, cadModelStl, capacitorPins, capacitorProps, chipProps, circleSmtPadProps, circleSolderPasteProps, commonComponentProps, commonLayoutProps, componentProps, constrainedLayoutProps, constraintProps, crystalPins, crystalProps, diodePins, diodeProps, direction, directionAlongEdge, distanceOrMultiplier, edit_component_location_event, edit_pcb_component_location_event, edit_schematic_component_location_event, edit_trace_hint_event, explicitPinSideDefinition, fabricationNotePathProps, fabricationNoteTextProps, footprintProp, footprintProps, groupProps, holeProps, inductorPins, inductorProps, jumperProps, ledPins, ledProps, lrPins, lrPolarPins, manual_edit_event, manual_edits_file, manual_pcb_placement, manual_schematic_placement, manual_trace_hint, mosfetPins, mosfetProps, netAliasProps, netProps, pcbKeepoutProps, pcbLayoutProps, pcbSameXConstraintProps, pcbSameYConstraintProps, pcbTraceProps, pcbXDistConstraintProps, pcbYDistConstraintProps, pillSmtPadProps, pinHeaderProps, pinLabelsProp, platedHoleProps, point3, portHints, portProps, portRef, potentiometerPins, potentiometerProps, powerSourceProps, pushButtonProps, rectSmtPadProps, rectSolderPasteProps, resistorPins, resistorProps, resonatorProps, rotatedRectSmtPadProps, rotationPoint3, routeHintPointProps, schematicBoxProps, schematicLineProps, schematicPathProps, schematicPinArrangement, schematicPinStyle, schematicPortArrangement, schematicTextProps, silkscreenCircleProps, silkscreenLineProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, smtPadProps, solderPasteProps, subcircuitGroupProps, subcircuitGroupPropsWithBool, subcircuitProps, supplierProps, switchProps, traceHintProps, traceProps, transistorPins, transistorProps, viaProps };
+export { type AutorouterConfig, type AutorouterProp, type BaseGroupProps, type BaseManualEditEvent, type BaseManualEditEventInput, type BatteryProps, type BoardProps, type CadModelBase, type CadModelJscad, type CadModelObj, type CadModelProp, type CadModelStl, type CapacitorProps, type ChipProps, type CirclePlatedHoleProps, type CircleSmtPadProps, type CircleSolderPasteProps, type CommonComponentProps, type CommonLayoutProps, type ComponentProps, type ConstrainedLayoutProps, type ConstraintProps, type CrystalProps, type DiodeProps, type Direction, type DirectionAlongEdge, type EditPcbComponentLocationEvent, type EditPcbComponentLocationEventInput, type EditSchematicComponentLocationEvent, type EditSchematicComponentLocationEventInput, type EditTraceHintEvent, type EditTraceHintEventInput, type FabricationNotePathProps, type FabricationNoteTextProps, type Footprint, type FootprintProps, type FootprintPropsInput, type FootprintSoupElements, type GroupProps, type HoleProps, type InductorProps, type InferredChipProps, type InferredConstrainedLayoutProps, type InferredHoleProps, type InferredSmtPadProps, type InferredSolderPasteProps, type InferredSwitchProps, type JumperProps, type LedProps, type ManualEditEvent, type ManualEditEventInput, type ManualEditsFile, type ManualEditsFileInput, type ManualPcbPlacement, type ManualPcbPlacementInput, type ManualSchematicPlacement, type ManualSchematicPlacementInput, type ManualTraceHint, type ManualTraceHintInput, type MosfetProps, type NetAliasProps, type NetProps, type NonSubcircuitGroupProps, type OvalPlatedHoleProps, type PartsEngine, type PcbKeepoutProps, type PcbLayoutProps, type PcbRouteCache, type PcbSameXConstraint, type PcbSameYConstraint, type PcbTraceProps, type PcbXDistConstraint, type PcbYDistConstraint, type PillPlatedHoleProps, type PillSmtPadProps, type PinHeaderProps, type PinLabels, type PinSideDefinition, type PinVariant, type PlatedHoleProps, type PortHints, type PortProps, type PotentiometerPinVariant, type PotentiometerProps, type PowerSourceProps, type PushButtonProps, type RectSmtPadProps, type RectSolderPasteProps, type ResistorProps, type ResonatorPinVariant, type ResonatorProps, type RotatedRectSmtPadProps, type SchematicBoxProps, type SchematicLineProps, type SchematicPathProps, type SchematicPinArrangement, type SchematicPinArrangementWithPinCounts, type SchematicPinArrangementWithSides, type SchematicPinArrangementWithSizes, type SchematicPinStyle, type SchematicPortArrangement, type SchematicPortArrangementWithPinCounts, type SchematicPortArrangementWithSides, type SchematicPortArrangementWithSizes, type SchematicTextProps, type SilkscreenCircleProps, type SilkscreenLineProps, type SilkscreenPathProps, type SilkscreenRectProps, type SilkscreenTextProps, type SmtPadProps, type SolderPasteProps, type SubcircuitGroupProps, type SubcircuitGroupPropsWithBool, type SubcircuitProps, type SupplierName, type SupplierPartNumbers, type SupplierProps, type SwitchProps, type TraceHintProps, type TraceProps, type TransistorProps, type ViaProps, autorouterConfig, autorouterProp, baseGroupProps, base_manual_edit_event, batteryPins, batteryProps, boardProps, bugProps, cadModelBase, cadModelJscad, cadModelObj, cadModelProp, cadModelStl, capacitorPins, capacitorProps, chipProps, circleSmtPadProps, circleSolderPasteProps, commonComponentProps, commonLayoutProps, componentProps, constrainedLayoutProps, constraintProps, crystalPins, crystalProps, diodePins, diodeProps, direction, directionAlongEdge, distanceOrMultiplier, edit_component_location_event, edit_pcb_component_location_event, edit_schematic_component_location_event, edit_trace_hint_event, explicitPinSideDefinition, fabricationNotePathProps, fabricationNoteTextProps, footprintProp, footprintProps, groupProps, holeProps, inductorPins, inductorProps, jumperProps, ledPins, ledProps, lrPins, lrPolarPins, manual_edit_event, manual_edits_file, manual_pcb_placement, manual_schematic_placement, manual_trace_hint, mosfetPins, mosfetProps, netAliasProps, netProps, pcbKeepoutProps, pcbLayoutProps, pcbSameXConstraintProps, pcbSameYConstraintProps, pcbTraceProps, pcbXDistConstraintProps, pcbYDistConstraintProps, pillSmtPadProps, pinHeaderProps, pinLabelsProp, platedHoleProps, point3, portHints, portProps, portRef, potentiometerProps, powerSourceProps, pushButtonProps, rectSmtPadProps, rectSolderPasteProps, resistorPins, resistorProps, resonatorProps, rotatedRectSmtPadProps, rotationPoint3, routeHintPointProps, schematicBoxProps, schematicLineProps, schematicPathProps, schematicPinArrangement, schematicPinStyle, schematicPortArrangement, schematicTextProps, silkscreenCircleProps, silkscreenLineProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, smtPadProps, solderPasteProps, subcircuitGroupProps, subcircuitGroupPropsWithBool, subcircuitProps, supplierProps, switchProps, traceHintProps, traceProps, transistorPins, transistorProps, viaProps };

package/dist/index.js

@@ -431,61 +431,62 @@ expectTypesMatch(true);
 
 // lib/components/potentiometer.ts
 import { resistance as resistance2 } from "circuit-json";
+import { z as z25 } from "zod";
 var potentiometerProps = commonComponentProps.extend({
-  maxResistance: resistance2
+  maxResistance: resistance2,
+  pinVariant: z25.enum(["two_pin", "three_pin"]).optional()
 });
-var potentiometerPins = lrPins;
 expectTypesMatch(true);
 
 // lib/components/crystal.ts
 import { frequency, capacitance } from "circuit-json";
-import { z as z25 } from "zod";
+import { z as z26 } from "zod";
 var crystalProps = commonComponentProps.extend({
   frequency,
   loadCapacitance: capacitance,
-  pinVariant: z25.enum(["2pin", "4pin"]).optional()
+  pinVariant: z26.enum(["2pin", "4pin"]).optional()
 });
 var crystalPins = lrPins;
 expectTypesMatch(true);
 
 // lib/components/resonator.ts
 import { frequency as frequency2, capacitance as capacitance2 } from "circuit-json";
-import { z as z26 } from "zod";
+import { z as z27 } from "zod";
 var resonatorProps = commonComponentProps.extend({
   frequency: frequency2,
   loadCapacitance: capacitance2,
-  pinVariant: z26.enum(["no_ground", "ground_pin", "two_ground_pins"]).optional()
+  pinVariant: z27.enum(["no_ground", "ground_pin", "two_ground_pins"]).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/capacitor.ts
 import { capacitance as capacitance3 } from "circuit-json";
-import { z as z27 } from "zod";
+import { z as z28 } from "zod";
 var capacitorProps = commonComponentProps.extend({
   capacitance: capacitance3,
-  polarized: z27.boolean().optional().default(false),
-  decouplingFor: z27.string().optional(),
-  decouplingTo: z27.string().optional(),
-  bypassFor: z27.string().optional(),
-  bypassTo: z27.string().optional(),
-  maxDecouplingTraceLength: z27.number().optional()
+  polarized: z28.boolean().optional().default(false),
+  decouplingFor: z28.string().optional(),
+  decouplingTo: z28.string().optional(),
+  bypassFor: z28.string().optional(),
+  bypassTo: z28.string().optional(),
+  maxDecouplingTraceLength: z28.number().optional()
 });
 var capacitorPins = lrPolarPins;
 expectTypesMatch(true);
 
 // lib/components/net.ts
-import { z as z28 } from "zod";
-var netProps = z28.object({
-  name: z28.string()
+import { z as z29 } from "zod";
+var netProps = z29.object({
+  name: z29.string()
 });
 expectTypesMatch(true);
 
 // lib/components/constrainedlayout.ts
-import { z as z29 } from "zod";
-var constrainedLayoutProps = z29.object({
-  name: z29.string().optional(),
-  pcbOnly: z29.boolean().optional(),
-  schOnly: z29.boolean().optional()
+import { z as z30 } from "zod";
+var constrainedLayoutProps = z30.object({
+  name: z30.string().optional(),
+  pcbOnly: z30.boolean().optional(),
+  schOnly: z30.boolean().optional()
 });
 expectTypesMatch(true);
 
@@ -494,46 +495,46 @@ import "zod";
 import { distance as distance9, length as length2 } from "circuit-json";
 
 // lib/components/constraint.ts
-import { z as z31 } from "zod";
-var pcbXDistConstraintProps = z31.object({
-  pcb: z31.literal(true).optional(),
+import { z as z32 } from "zod";
+var pcbXDistConstraintProps = z32.object({
+  pcb: z32.literal(true).optional(),
   xDist: distance9,
-  left: z31.string(),
-  right: z31.string(),
-  edgeToEdge: z31.literal(true).optional(),
-  centerToCenter: z31.literal(true).optional()
+  left: z32.string(),
+  right: z32.string(),
+  edgeToEdge: z32.literal(true).optional(),
+  centerToCenter: z32.literal(true).optional()
 });
 expectTypesMatch(
   true
 );
-var pcbYDistConstraintProps = z31.object({
-  pcb: z31.literal(true).optional(),
+var pcbYDistConstraintProps = z32.object({
+  pcb: z32.literal(true).optional(),
   yDist: distance9,
-  top: z31.string(),
-  bottom: z31.string(),
-  edgeToEdge: z31.literal(true).optional(),
-  centerToCenter: z31.literal(true).optional()
+  top: z32.string(),
+  bottom: z32.string(),
+  edgeToEdge: z32.literal(true).optional(),
+  centerToCenter: z32.literal(true).optional()
 });
 expectTypesMatch(
   true
 );
-var pcbSameYConstraintProps = z31.object({
-  pcb: z31.literal(true).optional(),
-  sameY: z31.literal(true).optional(),
-  for: z31.array(z31.string())
+var pcbSameYConstraintProps = z32.object({
+  pcb: z32.literal(true).optional(),
+  sameY: z32.literal(true).optional(),
+  for: z32.array(z32.string())
 });
 expectTypesMatch(
   true
 );
-var pcbSameXConstraintProps = z31.object({
-  pcb: z31.literal(true).optional(),
-  sameX: z31.literal(true).optional(),
-  for: z31.array(z31.string())
+var pcbSameXConstraintProps = z32.object({
+  pcb: z32.literal(true).optional(),
+  sameX: z32.literal(true).optional(),
+  for: z32.array(z32.string())
 });
 expectTypesMatch(
   true
 );
-var constraintProps = z31.union([
+var constraintProps = z32.union([
   pcbXDistConstraintProps,
   pcbYDistConstraintProps,
   pcbSameYConstraintProps,
@@ -542,37 +543,37 @@ var constraintProps = z31.union([
 expectTypesMatch(true);
 
 // lib/components/smtpad.ts
-import { z as z32 } from "zod";
+import { z as z33 } from "zod";
 var rectSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  shape: z32.literal("rect"),
+  shape: z33.literal("rect"),
   width: distance9,
   height: distance9,
   portHints: portHints.optional()
 });
 expectTypesMatch(true);
 var rotatedRectSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  shape: z32.literal("rotated_rect"),
+  shape: z33.literal("rotated_rect"),
   width: distance9,
   height: distance9,
-  ccwRotation: z32.number(),
+  ccwRotation: z33.number(),
   portHints: portHints.optional()
 });
 expectTypesMatch(true);
 var circleSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  shape: z32.literal("circle"),
+  shape: z33.literal("circle"),
   radius: distance9,
   portHints: portHints.optional()
 });
 expectTypesMatch(true);
 var pillSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  shape: z32.literal("pill"),
+  shape: z33.literal("pill"),
   width: distance9,
   height: distance9,
   radius: distance9,
   portHints: portHints.optional()
 });
 expectTypesMatch(true);
-var smtPadProps = z32.union([
+var smtPadProps = z33.union([
   circleSmtPadProps,
   rectSmtPadProps,
   rotatedRectSmtPadProps,
@@ -581,28 +582,28 @@ var smtPadProps = z32.union([
 expectTypesMatch(true);
 
 // lib/components/solderpaste.ts
-import { z as z33 } from "zod";
+import { z as z34 } from "zod";
 var rectSolderPasteProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  shape: z33.literal("rect"),
+  shape: z34.literal("rect"),
   width: distance9,
   height: distance9
 });
 expectTypesMatch(true);
 var circleSolderPasteProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  shape: z33.literal("circle"),
+  shape: z34.literal("circle"),
   radius: distance9
 });
 expectTypesMatch(true);
-var solderPasteProps = z33.union([
+var solderPasteProps = z34.union([
   circleSolderPasteProps,
   rectSolderPasteProps
 ]);
 expectTypesMatch(true);
 
 // lib/components/hole.ts
-import { z as z34 } from "zod";
+import { z as z35 } from "zod";
 var holeProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  name: z34.string().optional(),
+  name: z35.string().optional(),
   diameter: distance9.optional(),
   radius: distance9.optional()
 }).transform((d) => ({
@@ -614,24 +615,24 @@ expectTypesMatch(true);
 
 // lib/components/trace.ts
 import { distance as distance10, route_hint_point as route_hint_point3 } from "circuit-json";
-import { z as z35 } from "zod";
-var portRef = z35.union([
-  z35.string(),
-  z35.custom(
+import { z as z36 } from "zod";
+var portRef = z36.union([
+  z36.string(),
+  z36.custom(
     (v) => Boolean(v.getPortSelector)
   )
 ]);
-var baseTraceProps = z35.object({
-  key: z35.string().optional(),
+var baseTraceProps = z36.object({
+  key: z36.string().optional(),
   thickness: distance10.optional(),
-  schematicRouteHints: z35.array(point).optional(),
-  pcbRouteHints: z35.array(route_hint_point3).optional(),
-  schDisplayLabel: z35.string().optional(),
+  schematicRouteHints: z36.array(point).optional(),
+  pcbRouteHints: z36.array(route_hint_point3).optional(),
+  schDisplayLabel: z36.string().optional(),
   maxLength: distance10.optional()
 });
-var traceProps = z35.union([
+var traceProps = z36.union([
   baseTraceProps.extend({
-    path: z35.array(portRef)
+    path: z36.array(portRef)
   }),
   baseTraceProps.extend({
     from: portRef,
@@ -641,15 +642,15 @@ var traceProps = z35.union([
 
 // lib/components/footprint.ts
 import { layer_ref as layer_ref3 } from "circuit-json";
-import { z as z36 } from "zod";
-var footprintProps = z36.object({
+import { z as z37 } from "zod";
+var footprintProps = z37.object({
   originalLayer: layer_ref3.default("top").optional()
 });
 expectTypesMatch(true);
 
 // lib/components/battery.ts
-import { z as z37 } from "zod";
-var capacity = z37.number().or(z37.string().endsWith("mAh")).transform((v) => {
+import { z as z38 } from "zod";
+var capacity = z38.number().or(z38.string().endsWith("mAh")).transform((v) => {
   if (typeof v === "string") {
     const valString = v.replace("mAh", "");
     const num = Number.parseFloat(valString);
@@ -668,37 +669,37 @@ expectTypesMatch(true);
 
 // lib/components/pin-header.ts
 import { distance as distance11 } from "circuit-json";
-import { z as z38 } from "zod";
+import { z as z39 } from "zod";
 var pinHeaderProps = commonComponentProps.extend({
-  pinCount: z38.number(),
+  pinCount: z39.number(),
   pitch: distance11.optional(),
-  schFacingDirection: z38.enum(["up", "down", "left", "right"]).optional(),
-  gender: z38.enum(["male", "female"]).optional().default("male"),
-  showSilkscreenPinLabels: z38.boolean().optional(),
-  doubleRow: z38.boolean().optional(),
+  schFacingDirection: z39.enum(["up", "down", "left", "right"]).optional(),
+  gender: z39.enum(["male", "female"]).optional().default("male"),
+  showSilkscreenPinLabels: z39.boolean().optional(),
+  doubleRow: z39.boolean().optional(),
   holeDiameter: distance11.optional(),
   platedDiameter: distance11.optional(),
-  pinLabels: z38.array(z38.string()).optional(),
-  facingDirection: z38.enum(["left", "right"]).optional()
+  pinLabels: z39.array(z39.string()).optional(),
+  facingDirection: z39.enum(["left", "right"]).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/netalias.ts
-import { z as z39 } from "zod";
+import { z as z40 } from "zod";
 import { rotation as rotation2 } from "circuit-json";
-var netAliasProps = z39.object({
-  net: z39.string().optional(),
+var netAliasProps = z40.object({
+  net: z40.string().optional(),
   schX: distance9.optional(),
   schY: distance9.optional(),
   schRotation: rotation2.optional(),
-  anchorSide: z39.enum(["left", "up", "right", "down"]).optional()
+  anchorSide: z40.enum(["left", "up", "right", "down"]).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/push-button.ts
-import { z as z40 } from "zod";
+import { z as z41 } from "zod";
 var pushButtonProps = commonComponentProps.extend({
-  internallyConnectedPins: z40.array(z40.array(z40.string())).optional()
+  internallyConnectedPins: z41.array(z41.array(z41.string())).optional()
 });
 expectTypesMatch(true);
 
@@ -707,9 +708,9 @@ var subcircuitProps = subcircuitGroupProps;
 expectTypesMatch(true);
 
 // lib/components/transistor.ts
-import { z as z41 } from "zod";
+import { z as z42 } from "zod";
 var transistorProps = commonComponentProps.extend({
-  type: z41.enum(["npn", "pnp", "bjt", "jfet", "mosfet"])
+  type: z42.enum(["npn", "pnp", "bjt", "jfet", "mosfet"])
 });
 var transistorPins = [
   "pin1",
@@ -722,10 +723,10 @@ var transistorPins = [
 expectTypesMatch(true);
 
 // lib/components/mosfet.ts
-import { z as z42 } from "zod";
+import { z as z43 } from "zod";
 var mosfetProps = commonComponentProps.extend({
-  channelType: z42.enum(["n", "p"]),
-  mosfetMode: z42.enum(["enhancement", "depletion"])
+  channelType: z43.enum(["n", "p"]),
+  mosfetMode: z43.enum(["enhancement", "depletion"])
 });
 var mosfetPins = [
   "pin1",
@@ -749,18 +750,18 @@ var diodeProps = commonComponentProps.extend({});
 var diodePins = lrPolarPins;
 
 // lib/components/led.ts
-import { z as z43 } from "zod";
+import { z as z44 } from "zod";
 var ledProps = commonComponentProps.extend({
-  color: z43.string().optional()
+  color: z44.string().optional()
 });
 var ledPins = lrPolarPins;
 
 // lib/components/switch.ts
-import { z as z44 } from "zod";
+import { z as z45 } from "zod";
 var switchProps = commonComponentProps.extend({
-  ftype: z44.literal("switch"),
-  type: z44.enum(["spst", "spdt", "dpst", "dpdt"]).optional(),
-  isNormallyClosed: z44.boolean().optional().default(false)
+  ftype: z45.literal("switch"),
+  type: z45.enum(["spst", "spdt", "dpst", "dpdt"]).optional(),
+  isNormallyClosed: z45.boolean().optional().default(false)
 }).transform((props) => {
   const updatedProps = { ...props };
   switch (updatedProps.type) {
@@ -783,31 +784,31 @@ expectTypesMatch(true);
 
 // lib/components/fabrication-note-text.ts
 import { length as length3 } from "circuit-json";
-import { z as z45 } from "zod";
+import { z as z46 } from "zod";
 var fabricationNoteTextProps = pcbLayoutProps.extend({
-  text: z45.string(),
-  anchorAlignment: z45.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  font: z45.enum(["tscircuit2024"]).optional(),
+  text: z46.string(),
+  anchorAlignment: z46.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  font: z46.enum(["tscircuit2024"]).optional(),
   fontSize: length3.optional(),
-  color: z45.string().optional()
+  color: z46.string().optional()
 });
 
 // lib/components/fabrication-note-path.ts
 import { length as length4, route_hint_point as route_hint_point4 } from "circuit-json";
-import { z as z46 } from "zod";
+import { z as z47 } from "zod";
 var fabricationNotePathProps = pcbLayoutProps.omit({ pcbX: true, pcbY: true, pcbRotation: true }).extend({
-  route: z46.array(route_hint_point4),
+  route: z47.array(route_hint_point4),
   strokeWidth: length4.optional(),
-  color: z46.string().optional()
+  color: z47.string().optional()
 });
 
 // lib/components/pcb-trace.ts
 import { distance as distance12, route_hint_point as route_hint_point5 } from "circuit-json";
-import { z as z47 } from "zod";
-var pcbTraceProps = z47.object({
-  layer: z47.string().optional(),
+import { z as z48 } from "zod";
+var pcbTraceProps = z48.object({
+  layer: z48.string().optional(),
   thickness: distance12.optional(),
-  route: z47.array(route_hint_point5)
+  route: z48.array(route_hint_point5)
 });
 
 // lib/components/via.ts
@@ -821,14 +822,14 @@ var viaProps = commonLayoutProps.extend({
 
 // lib/components/pcb-keepout.ts
 import { distance as distance14 } from "circuit-json";
-import { z as z48 } from "zod";
-var pcbKeepoutProps = z48.union([
+import { z as z49 } from "zod";
+var pcbKeepoutProps = z49.union([
   pcbLayoutProps.omit({ pcbRotation: true }).extend({
-    shape: z48.literal("circle"),
+    shape: z49.literal("circle"),
     radius: distance14
   }),
   pcbLayoutProps.extend({
-    shape: z48.literal("rect"),
+    shape: z49.literal("rect"),
     width: distance14,
     height: distance14
   })
@@ -842,8 +843,8 @@ var powerSourceProps = commonComponentProps.extend({
 
 // lib/components/schematic-box.ts
 import { distance as distance15 } from "circuit-json";
-import { z as z49 } from "zod";
-var schematicBoxProps = z49.object({
+import { z as z50 } from "zod";
+var schematicBoxProps = z50.object({
   schX: distance15,
   schY: distance15,
   width: distance15,
@@ -852,8 +853,8 @@ var schematicBoxProps = z49.object({
 
 // lib/components/schematic-line.ts
 import { distance as distance16 } from "circuit-json";
-import { z as z50 } from "zod";
-var schematicLineProps = z50.object({
+import { z as z51 } from "zod";
+var schematicLineProps = z51.object({
   x1: distance16,
   y1: distance16,
   x2: distance16,
@@ -862,37 +863,37 @@ var schematicLineProps = z50.object({
 
 // lib/components/schematic-text.ts
 import { distance as distance17 } from "circuit-json";
-import { z as z51 } from "zod";
-var schematicTextProps = z51.object({
+import { z as z52 } from "zod";
+var schematicTextProps = z52.object({
   schX: distance17,
   schY: distance17,
-  text: z51.string()
+  text: z52.string()
 });
 
 // lib/components/schematic-path.ts
 import { point as point5 } from "circuit-json";
-import { z as z52 } from "zod";
-var schematicPathProps = z52.object({
-  points: z52.array(point5),
-  isFilled: z52.boolean().optional().default(false),
-  fillColor: z52.enum(["red", "blue"]).optional()
+import { z as z53 } from "zod";
+var schematicPathProps = z53.object({
+  points: z53.array(point5),
+  isFilled: z53.boolean().optional().default(false),
+  fillColor: z53.enum(["red", "blue"]).optional()
 });
 
 // lib/components/silkscreen-text.ts
 import { length as length5 } from "circuit-json";
-import { z as z53 } from "zod";
+import { z as z54 } from "zod";
 var silkscreenTextProps = pcbLayoutProps.extend({
-  text: z53.string(),
-  anchorAlignment: z53.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  font: z53.enum(["tscircuit2024"]).optional(),
+  text: z54.string(),
+  anchorAlignment: z54.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  font: z54.enum(["tscircuit2024"]).optional(),
   fontSize: length5.optional()
 });
 
 // lib/components/silkscreen-path.ts
 import { length as length6, route_hint_point as route_hint_point6 } from "circuit-json";
-import { z as z54 } from "zod";
+import { z as z55 } from "zod";
 var silkscreenPathProps = pcbLayoutProps.omit({ pcbX: true, pcbY: true, pcbRotation: true }).extend({
-  route: z54.array(route_hint_point6),
+  route: z55.array(route_hint_point6),
   strokeWidth: length6.optional()
 });
 
@@ -908,10 +909,10 @@ var silkscreenLineProps = pcbLayoutProps.omit({ pcbX: true, pcbY: true, pcbRotat
 
 // lib/components/silkscreen-rect.ts
 import { distance as distance19 } from "circuit-json";
-import { z as z55 } from "zod";
+import { z as z56 } from "zod";
 var silkscreenRectProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  isFilled: z55.boolean().optional(),
-  isOutline: z55.boolean().optional(),
+  isFilled: z56.boolean().optional(),
+  isOutline: z56.boolean().optional(),
   strokeWidth: distance19.optional(),
   width: distance19,
   height: distance19
@@ -919,39 +920,39 @@ var silkscreenRectProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
 
 // lib/components/silkscreen-circle.ts
 import { distance as distance20 } from "circuit-json";
-import { z as z56 } from "zod";
+import { z as z57 } from "zod";
 var silkscreenCircleProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  isFilled: z56.boolean().optional(),
-  isOutline: z56.boolean().optional(),
+  isFilled: z57.boolean().optional(),
+  isOutline: z57.boolean().optional(),
   strokeWidth: distance20.optional(),
   radius: distance20
 });
 
 // lib/components/trace-hint.ts
 import { distance as distance21, layer_ref as layer_ref5, route_hint_point as route_hint_point7 } from "circuit-json";
-import { z as z57 } from "zod";
-var routeHintPointProps = z57.object({
+import { z as z58 } from "zod";
+var routeHintPointProps = z58.object({
   x: distance21,
   y: distance21,
-  via: z57.boolean().optional(),
+  via: z58.boolean().optional(),
   toLayer: layer_ref5.optional()
 });
-var traceHintProps = z57.object({
-  for: z57.string().optional().describe(
+var traceHintProps = z58.object({
+  for: z58.string().optional().describe(
     "Selector for the port you're targeting, not required if you're inside a trace"
   ),
-  order: z57.number().optional(),
+  order: z58.number().optional(),
   offset: route_hint_point7.or(routeHintPointProps).optional(),
-  offsets: z57.array(route_hint_point7).or(z57.array(routeHintPointProps)).optional(),
-  traceWidth: z57.number().optional()
+  offsets: z58.array(route_hint_point7).or(z58.array(routeHintPointProps)).optional(),
+  traceWidth: z58.number().optional()
 });
 
 // lib/components/port.ts
-import { z as z58 } from "zod";
+import { z as z59 } from "zod";
 var portProps = commonLayoutProps.extend({
-  name: z58.string(),
-  pinNumber: z58.number().optional(),
-  aliases: z58.array(z58.string()).optional(),
+  name: z59.string(),
+  pinNumber: z59.number().optional(),
+  aliases: z59.array(z59.string()).optional(),
   direction
 });
 export {
@@ -1027,7 +1028,6 @@ export {
   portHints,
   portProps,
   portRef,
-  potentiometerPins,
   potentiometerProps,
   powerSourceProps,
   pushButtonProps,

package/dist/index.js.map

@@ -1 +1 @@
-{"version":3,"sources":["../lib/typecheck.ts","../lib/common/direction.ts","../lib/common/portHints.ts","../lib/common/layout.ts","../lib/common/cadModel.ts","../lib/common/point3.ts","../lib/common/footprintProp.ts","../lib/common/schematicPinDefinitions.ts","../lib/common/schematicPinStyle.ts","../lib/components/board.ts","../lib/common/point.ts","../lib/components/group.ts","../lib/manual-edits/manual-edit-events/base_manual_edit_event.ts","../lib/manual-edits/manual-edit-events/edit_pcb_component_location_event.ts","../lib/manual-edits/manual-edit-events/edit_trace_hint_event.ts","../lib/manual-edits/manual-edit-events/edit_schematic_component_location_event.ts","../lib/manual-edits/manual_edit_event.ts","../lib/manual-edits/manual_edits_file.ts","../lib/manual-edits/manual_pcb_placement.ts","../lib/manual-edits/manual_trace_hint.ts","../lib/manual-edits/manual_schematic_placement.ts","../lib/components/chip.ts","../lib/components/jumper.ts","../lib/components/platedhole.ts","../lib/components/resistor.ts","../lib/components/potentiometer.ts","../lib/components/crystal.ts","../lib/components/resonator.ts","../lib/components/capacitor.ts","../lib/components/net.ts","../lib/components/constrainedlayout.ts","../lib/common/distance.ts","../lib/components/constraint.ts","../lib/components/smtpad.ts","../lib/components/solderpaste.ts","../lib/components/hole.ts","../lib/components/trace.ts","../lib/components/footprint.ts","../lib/components/battery.ts","../lib/components/pin-header.ts","../lib/components/netalias.ts","../lib/components/push-button.ts","../lib/components/subcircuit.ts","../lib/components/transistor.ts","../lib/components/mosfet.ts","../lib/components/inductor.ts","../lib/components/diode.ts","../lib/components/led.ts","../lib/components/switch.ts","../lib/components/fabrication-note-text.ts","../lib/components/fabrication-note-path.ts","../lib/components/pcb-trace.ts","../lib/components/via.ts","../lib/components/pcb-keepout.ts","../lib/components/power-source.ts","../lib/components/schematic-box.ts","../lib/components/schematic-line.ts","../lib/components/schematic-text.ts","../lib/components/schematic-path.ts","../lib/components/silkscreen-text.ts","../lib/components/silkscreen-path.ts","../lib/components/silkscreen-line.ts","../lib/components/silkscreen-rect.ts","../lib/components/silkscreen-circle.ts","../lib/components/trace-hint.ts","../lib/components/port.ts"],"sourcesContent":["import type { TypeEqual } from \"ts-expect\"\n\ntype IsNever<T> = [T] extends [never] ? true : false\n\ntype GetMismatchedProps<T1, T2> = {\n  [K in keyof T1 & keyof T2]: T1[K] extends T2[K]\n    ? T2[K] extends T1[K]\n      ? never\n      : K\n    : K\n}[keyof T1 & keyof T2]\n\nexport const expectTypesMatch = <\n  const T1,\n  const T2,\n  T3 = Exclude<keyof T1, keyof T2>,\n  T4 = Exclude<keyof T2, keyof T1>,\n  T5 = GetMismatchedProps<T1, T2>,\n>(\n  shouldBe: IsNever<T3> extends true\n    ? IsNever<T4> extends true\n      ? IsNever<T5> extends true\n        ? TypeEqual<T1, T2>\n        : `property ${T5 extends string ? T5 : \"\"} has mismatched types`\n      : `extra props ${T4 extends string ? T4 : \"\"}`\n    : `missing props ${T3 extends string ? T3 : \"\"}`,\n): void => {}\n\n// ------ TESTS -------\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: number\n    b: number\n  }\n>(\"extra props b\")\n\nexpectTypesMatch<\n  {\n    a: number\n    b: number\n  },\n  {\n    a: number\n  }\n>(\"missing props b\")\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: number\n  }\n>(true)\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: string\n  }\n>(\"property a has mismatched types\")\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nexport const direction = z.enum([\"up\", \"down\", \"left\", \"right\"])\nexport type Direction = \"up\" | \"down\" | \"left\" | \"right\"\n\nexport type DirectionAlongEdge =\n  | \"top-to-bottom\"\n  | \"left-to-right\"\n  | \"bottom-to-top\"\n  | \"right-to-left\"\n\nexport const directionAlongEdge = z.enum([\n  \"top-to-bottom\",\n  \"left-to-right\",\n  \"bottom-to-top\",\n  \"right-to-left\",\n])\n\nexpectTypesMatch<Direction, z.infer<typeof direction>>(true)\nexpectTypesMatch<DirectionAlongEdge, z.infer<typeof directionAlongEdge>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const portHints = z.array(z.string().or(z.number()))\nexport type PortHints = (string | number)[]\n\nexpectTypesMatch<PortHints, z.infer<typeof portHints>>(true)\n","import {\n  type LayerRefInput,\n  distance,\n  layer_ref,\n  rotation,\n  supplier_name,\n} from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport { type CadModelProp, cadModelProp } from \"./cadModel\"\nimport { type Footprint, footprintProp } from \"./footprintProp\"\n\nexport interface PcbLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n  layer?: LayerRefInput\n}\n\nexport interface CommonLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n\n  schX?: string | number\n  schY?: string | number\n  schRotation?: string | number\n\n  layer?: LayerRefInput\n  footprint?: Footprint\n}\n\nexport const pcbLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n})\ntype InferredPcbLayoutProps = z.input<typeof pcbLayoutProps>\nexpectTypesMatch<PcbLayoutProps, InferredPcbLayoutProps>(true)\n\nexport const commonLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n  footprint: footprintProp.optional(),\n})\n\ntype InferredCommonLayoutProps = z.input<typeof commonLayoutProps>\nexpectTypesMatch<CommonLayoutProps, InferredCommonLayoutProps>(true)\n\nexport type SupplierName =\n  | \"jlcpcb\"\n  | \"macrofab\"\n  | \"pcbway\"\n  | \"digikey\"\n  | \"mouser\"\n  | \"lcsc\"\nexport type SupplierPartNumbers = { [k in SupplierName]?: string[] }\nexport interface SupplierProps {\n  supplierPartNumbers?: SupplierPartNumbers\n}\nexport const supplierProps = z.object({\n  supplierPartNumbers: z.record(supplier_name, z.array(z.string())).optional(),\n})\n\nexpectTypesMatch<SupplierProps, z.input<typeof supplierProps>>(true)\n\nexport interface CommonComponentProps extends CommonLayoutProps {\n  key?: any\n  name: string\n  supplierPartNumbers?: SupplierPartNumbers\n  cadModel?: CadModelProp\n  children?: any\n  symbolName?: string\n}\n\nexport const commonComponentProps = commonLayoutProps\n  .merge(supplierProps)\n  .extend({\n    key: z.any().optional(),\n    name: z.string(),\n    cadModel: cadModelProp.optional(),\n    children: z.any().optional(),\n    symbolName: z.string().optional(),\n  })\n\ntype InferredCommonComponentProps = z.input<typeof commonComponentProps>\nexpectTypesMatch<CommonComponentProps, InferredCommonComponentProps>(true)\n\nexport const componentProps = commonComponentProps\nexport type ComponentProps = z.input<typeof componentProps>\n\nexport const lrPins = [\"pin1\", \"left\", \"pin2\", \"right\"] as const\nexport const lrPolarPins = [\n  \"pin1\",\n  \"left\",\n  \"anode\",\n  \"pos\",\n  \"pin2\",\n  \"right\",\n  \"cathode\",\n  \"neg\",\n] as const\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n","import { z } from \"zod\"\nimport { point3 } from \"./point3\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const rotationPoint3 = z.object({\n  x: z.union([z.number(), z.string()]),\n  y: z.union([z.number(), z.string()]),\n  z: z.union([z.number(), z.string()]),\n})\n\nexport interface CadModelBase {\n  rotationOffset?:\n    | number\n    | { x: number | string; y: number | string; z: number | string }\n  positionOffset?: {\n    x: number | string\n    y: number | string\n    z: number | string\n  }\n  size?: { x: number | string; y: number | string; z: number | string }\n}\n\nexport const cadModelBase = z.object({\n  rotationOffset: z.number().or(rotationPoint3).optional(),\n  positionOffset: point3.optional(),\n  size: point3.optional(),\n})\n\nexpectTypesMatch<CadModelBase, z.input<typeof cadModelBase>>(true)\n\nexport interface CadModelStl extends CadModelBase {\n  stlUrl: string\n}\nexport const cadModelStl = cadModelBase.extend({\n  stlUrl: z.string(),\n})\n\nexport interface CadModelObj extends CadModelBase {\n  objUrl: string\n  mtlUrl?: string\n}\nexport const cadModelObj = cadModelBase.extend({\n  objUrl: z.string(),\n  mtlUrl: z.string().optional(),\n})\n\nexport interface CadModelJscad extends CadModelBase {\n  jscad: Record<string, any>\n}\nexport const cadModelJscad = cadModelBase.extend({\n  jscad: z.record(z.any()),\n})\n\nexport type CadModelProp = string | CadModelStl | CadModelObj | CadModelJscad\n\nexport const cadModelProp = z.union([\n  z.string(),\n  cadModelStl,\n  cadModelObj,\n  cadModelJscad,\n])\n\ntype InferredCadModelProp = z.input<typeof cadModelProp>\nexpectTypesMatch<CadModelProp, InferredCadModelProp>(true)\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const point3 = z.object({\n  x: distance,\n  y: distance,\n  z: distance,\n})\n","import type { LayerRef } from \"circuit-json\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\n\n/**\n * This is an abbreviated definition of the soup elements that you can find here:\n * https://docs.tscircuit.com/api-reference/advanced/soup#pcb-smtpad\n */\nexport type FootprintSoupElements = {\n  type: \"pcb_smtpad\" | \"pcb_plated_hole\"\n  x: string | number\n  y: string | number\n  layer?: LayerRef\n  holeDiameter?: string | number\n  outerDiameter?: string | number\n  shape?: \"circle\" | \"rect\"\n  width?: string | number\n  height?: string | number\n  portHints?: string[]\n}\n\nexport type Footprint = string | ReactElement | FootprintSoupElements[]\nexport const footprintProp = z.custom<Footprint>((v) => true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\n/**\n * @deprecated Use SchematicPortArrangementWithPinCounts instead.\n */\nexport interface SchematicPortArrangementWithSizes {\n  leftSize?: number\n  topSize?: number\n  rightSize?: number\n  bottomSize?: number\n}\n\n/**\n * Specifies the number of pins on each side of the schematic box component.\n */\nexport interface SchematicPortArrangementWithPinCounts {\n  leftPinCount?: number\n  topPinCount?: number\n  rightPinCount?: number\n  bottomPinCount?: number\n}\n\nexport interface PinSideDefinition {\n  pins: Array<number | string>\n  direction:\n    | \"top-to-bottom\"\n    | \"left-to-right\"\n    | \"bottom-to-top\"\n    | \"right-to-left\"\n}\n\nexport interface SchematicPortArrangementWithSides {\n  leftSide?: PinSideDefinition\n  topSide?: PinSideDefinition\n  rightSide?: PinSideDefinition\n  bottomSide?: PinSideDefinition\n}\n\nexport interface SchematicPortArrangement\n  extends SchematicPortArrangementWithSizes,\n    SchematicPortArrangementWithSides,\n    SchematicPortArrangementWithPinCounts {}\n\nexport type SchematicPinArrangement = SchematicPortArrangement\nexport type SchematicPinArrangementWithSizes = SchematicPortArrangementWithSizes\nexport type SchematicPinArrangementWithSides = SchematicPortArrangementWithSides\nexport type SchematicPinArrangementWithPinCounts =\n  SchematicPortArrangementWithPinCounts\n\nexport const explicitPinSideDefinition = z.object({\n  pins: z.array(z.union([z.number(), z.string()])),\n  direction: z.union([\n    z.literal(\"top-to-bottom\"),\n    z.literal(\"left-to-right\"),\n    z.literal(\"bottom-to-top\"),\n    z.literal(\"right-to-left\"),\n  ]),\n})\n\n/**\n * @deprecated Use schematicPinArrangement instead.\n */\nexport const schematicPortArrangement = z.object({\n  leftSize: z.number().optional().describe(\"@deprecated, use leftPinCount\"),\n  topSize: z.number().optional().describe(\"@deprecated, use topPinCount\"),\n  rightSize: z.number().optional().describe(\"@deprecated, use rightPinCount\"),\n  bottomSize: z.number().optional().describe(\"@deprecated, use bottomPinCount\"),\n  leftPinCount: z.number().optional(),\n  rightPinCount: z.number().optional(),\n  topPinCount: z.number().optional(),\n  bottomPinCount: z.number().optional(),\n  leftSide: explicitPinSideDefinition.optional(),\n  rightSide: explicitPinSideDefinition.optional(),\n  topSide: explicitPinSideDefinition.optional(),\n  bottomSide: explicitPinSideDefinition.optional(),\n})\n\nexport const schematicPinArrangement = schematicPortArrangement\n\nexpectTypesMatch<\n  SchematicPortArrangement,\n  z.input<typeof schematicPortArrangement>\n>(true)\n","import { distance } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type SchematicPinStyle = Record<\n  string,\n  {\n    marginTop?: number | string\n    marginRight?: number | string\n    marginBottom?: number | string\n    marginLeft?: number | string\n\n    /** @deprecated use marginLeft */\n    leftMargin?: number | string\n    /** @deprecated use marginRight */\n    rightMargin?: number | string\n    /** @deprecated use marginTop */\n    topMargin?: number | string\n    /** @deprecated use marginBottom */\n    bottomMargin?: number | string\n  }\n>\n\nexport const schematicPinStyle = z.record(\n  z.object({\n    marginLeft: distance.optional(),\n    marginRight: distance.optional(),\n    marginTop: distance.optional(),\n    marginBottom: distance.optional(),\n\n    leftMargin: distance.optional(),\n    rightMargin: distance.optional(),\n    topMargin: distance.optional(),\n    bottomMargin: distance.optional(),\n  }),\n)\n\nexpectTypesMatch<SchematicPinStyle, z.input<typeof schematicPinStyle>>(true)\n","import type { LayoutBuilder, ManualEditFile } from \"@tscircuit/layout\"\nimport { distance } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport { type Point, point } from \"lib/common/point\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport { subcircuitGroupProps, type SubcircuitGroupProps } from \"./group\"\n\nexport interface BoardProps extends Omit<SubcircuitGroupProps, \"subcircuit\"> {\n  width?: number | string\n  height?: number | string\n  outline?: Point[]\n  outlineOffsetX?: number | string\n  outlineOffsetY?: number | string\n}\n\nexport const boardProps = subcircuitGroupProps.extend({\n  width: distance.optional(),\n  height: distance.optional(),\n  outline: z.array(point).optional(),\n  outlineOffsetX: distance.optional(),\n  outlineOffsetY: distance.optional(),\n})\n\ntype InferredBoardProps = z.input<typeof boardProps>\nexpectTypesMatch<BoardProps, InferredBoardProps>(true)\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const point = z.object({\n  x: distance,\n  y: distance,\n})\n\nexport type Point = { x: number | string; y: number | string }\n","import type { LayoutBuilder } from \"@tscircuit/layout\"\nimport { length } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport {\n  type CommonLayoutProps,\n  commonLayoutProps,\n  type SupplierPartNumbers,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport type { AnySourceComponent, PcbTrace } from \"circuit-json\"\nimport {\n  manual_edits_file,\n  type ManualEditsFile,\n  type ManualEditsFileInput,\n} from \"lib/manual-edits\"\n\nexport interface BaseGroupProps extends CommonLayoutProps {\n  name?: string\n  key?: any\n  children?: any\n}\n\nexport type PartsEngine = {\n  findPart: (params: {\n    sourceComponent: AnySourceComponent\n    footprinterString?: string\n  }) => Promise<SupplierPartNumbers> | SupplierPartNumbers\n}\n\nexport interface PcbRouteCache {\n  pcbTraces: PcbTrace[]\n  cacheKey: string\n}\n\nexport interface AutorouterConfig {\n  serverUrl?: string\n  inputFormat?: \"simplified\" | \"circuit-json\"\n  serverMode?: \"job\" | \"solve-endpoint\"\n  serverCacheEnabled?: boolean\n  cache?: PcbRouteCache\n  groupMode?: \"sequential-trace\" | \"subcircuit\"\n  local?: boolean\n}\n\nexport type AutorouterProp =\n  | AutorouterConfig\n  | \"sequential-trace\"\n  | \"subcircuit\"\n  | \"auto\"\n  | \"auto-local\"\n  | \"auto-cloud\"\n\nexport const autorouterConfig = z.object({\n  serverUrl: z.string().optional(),\n  inputFormat: z.enum([\"simplified\", \"circuit-json\"]).optional(),\n  serverMode: z.enum([\"job\", \"solve-endpoint\"]).optional(),\n  serverCacheEnabled: z.boolean().optional(),\n  cache: z.custom<PcbRouteCache>((v) => true).optional(),\n  groupMode: z.enum([\"sequential-trace\", \"subcircuit\"]).optional(),\n  local: z.boolean().optional(),\n})\n\nexport const autorouterProp = z.union([\n  autorouterConfig,\n  z.literal(\"sequential-trace\"),\n  z.literal(\"subcircuit\"),\n  z.literal(\"auto\"),\n  z.literal(\"auto-local\"),\n  z.literal(\"auto-cloud\"),\n])\n\nexport interface SubcircuitGroupProps extends BaseGroupProps {\n  layout?: LayoutBuilder\n  manualEdits?: ManualEditsFileInput\n  routingDisabled?: boolean\n  defaultTraceWidth?: Distance\n  minTraceWidth?: Distance\n  pcbRouteCache?: PcbRouteCache\n\n  autorouter?: AutorouterProp\n\n  /**\n   * If true, we'll automatically layout the schematic for this group. Must be\n   * a subcircuit (currently). This is eventually going to be replaced with more\n   * sophisticated layout options/modes and will be enabled by default.\n   */\n  schAutoLayoutEnabled?: boolean\n\n  /**\n   * If true, net labels will automatically be created for complex traces\n   */\n  schTraceAutoLabelEnabled?: boolean\n\n  partsEngine?: PartsEngine\n}\n\nexport interface SubcircuitGroupPropsWithBool extends SubcircuitGroupProps {\n  subcircuit: true\n}\n\nexport interface NonSubcircuitGroupProps extends BaseGroupProps {\n  subcircuit?: false | undefined\n}\n\nexport type GroupProps = SubcircuitGroupPropsWithBool | NonSubcircuitGroupProps\n\nexport const baseGroupProps = commonLayoutProps.extend({\n  name: z.string().optional(),\n  children: z.any().optional(),\n  key: z.any().optional(),\n})\n\nexport const subcircuitGroupProps = baseGroupProps.extend({\n  layout: z.custom<LayoutBuilder>((v) => true).optional(),\n  manualEdits: manual_edits_file.optional(),\n  schAutoLayoutEnabled: z.boolean().optional(),\n  schTraceAutoLabelEnabled: z.boolean().optional(),\n  routingDisabled: z.boolean().optional(),\n  defaultTraceWidth: length.optional(),\n  minTraceWidth: length.optional(),\n  partsEngine: z.custom<PartsEngine>((v) => \"findPart\" in v).optional(),\n  pcbRouteCache: z.custom<PcbRouteCache>((v) => true).optional(),\n  autorouter: autorouterProp.optional(),\n})\n\nexport const subcircuitGroupPropsWithBool = subcircuitGroupProps.extend({\n  subcircuit: z.literal(true),\n})\n\nexport const groupProps = z.discriminatedUnion(\"subcircuit\", [\n  baseGroupProps.extend({ subcircuit: z.literal(false).optional() }),\n  subcircuitGroupPropsWithBool,\n])\n\ntype InferredBaseGroupProps = z.input<typeof baseGroupProps>\ntype InferredSubcircuitGroupPropsWithBool = z.input<\n  typeof subcircuitGroupPropsWithBool\n>\n\nexpectTypesMatch<BaseGroupProps, InferredBaseGroupProps>(true)\nexpectTypesMatch<\n  SubcircuitGroupPropsWithBool,\n  InferredSubcircuitGroupPropsWithBool\n>(true)\n\ntype InferredGroupProps = z.input<typeof groupProps>\nexpectTypesMatch<GroupProps, InferredGroupProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport const base_manual_edit_event = z.object({\n  edit_event_id: z.string(),\n  in_progress: z.boolean().optional(),\n  created_at: z.number(),\n})\n\nexport interface BaseManualEditEvent {\n  edit_event_id: string\n  in_progress?: boolean\n  created_at: number\n}\n\nexport type BaseManualEditEventInput = z.input<typeof base_manual_edit_event>\n\nexpectTypesMatch<BaseManualEditEvent, z.infer<typeof base_manual_edit_event>>(\n  true,\n)\n","import { z } from \"zod\"\nimport {\n  base_manual_edit_event,\n  type BaseManualEditEvent,\n} from \"./base_manual_edit_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const edit_pcb_component_location_event = base_manual_edit_event.extend({\n  pcb_edit_event_type: z\n    .literal(\"edit_component_location\")\n    .describe(\"deprecated\"),\n  edit_event_type: z.literal(\"edit_pcb_component_location\"),\n  pcb_component_id: z.string(),\n  original_center: z.object({ x: z.number(), y: z.number() }),\n  new_center: z.object({ x: z.number(), y: z.number() }),\n})\n\n/** @deprecated use edit_pcb_component_location_event instead */\nexport const edit_component_location_event = edit_pcb_component_location_event\n\nexport interface EditPcbComponentLocationEvent extends BaseManualEditEvent {\n  edit_event_type: \"edit_pcb_component_location\"\n  /** @deprecated */\n  pcb_edit_event_type: \"edit_component_location\"\n  pcb_component_id: string\n  original_center: { x: number; y: number }\n  new_center: { x: number; y: number }\n}\n\nexport type EditPcbComponentLocationEventInput = z.input<\n  typeof edit_pcb_component_location_event\n>\n\nexpectTypesMatch<\n  EditPcbComponentLocationEvent,\n  z.infer<typeof edit_pcb_component_location_event>\n>(true)\n","import { z } from \"zod\"\nimport {\n  base_manual_edit_event,\n  type BaseManualEditEvent,\n} from \"./base_manual_edit_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { route_hint_point } from \"circuit-json\"\n\nexport const edit_trace_hint_event = base_manual_edit_event.extend({\n  pcb_edit_event_type: z.literal(\"edit_trace_hint\").describe(\"deprecated\"),\n  edit_event_type: z.literal(\"edit_pcb_trace_hint\").optional(),\n  pcb_port_id: z.string(),\n  pcb_trace_hint_id: z.string().optional(),\n  route: z.array(\n    z.object({ x: z.number(), y: z.number(), via: z.boolean().optional() }),\n  ),\n})\n\nexport interface EditTraceHintEvent extends BaseManualEditEvent {\n  /** @deprecated */\n  pcb_edit_event_type: \"edit_trace_hint\"\n  edit_event_type?: \"edit_pcb_trace_hint\"\n  pcb_port_id: string\n  pcb_trace_hint_id?: string\n  route: Array<{ x: number; y: number; via?: boolean }>\n}\n\nexport type EditTraceHintEventInput = z.input<typeof edit_trace_hint_event>\n\nexpectTypesMatch<EditTraceHintEvent, z.infer<typeof edit_trace_hint_event>>(\n  true,\n)\n","import { z } from \"zod\"\nimport {\n  base_manual_edit_event,\n  type BaseManualEditEvent,\n} from \"./base_manual_edit_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const edit_schematic_component_location_event =\n  base_manual_edit_event.extend({\n    edit_event_type: z.literal(\"edit_schematic_component_location\"),\n    schematic_component_id: z.string(),\n    original_center: z.object({ x: z.number(), y: z.number() }),\n    new_center: z.object({ x: z.number(), y: z.number() }),\n  })\n\nexport interface EditSchematicComponentLocationEvent\n  extends BaseManualEditEvent {\n  edit_event_type: \"edit_schematic_component_location\"\n  schematic_component_id: string\n  original_center: { x: number; y: number }\n  new_center: { x: number; y: number }\n}\n\nexport type EditSchematicComponentLocationEventInput = z.input<\n  typeof edit_schematic_component_location_event\n>\n\nexpectTypesMatch<\n  EditSchematicComponentLocationEvent,\n  z.infer<typeof edit_schematic_component_location_event>\n>(true)\n","import { z } from \"zod\"\nimport {\n  edit_pcb_component_location_event,\n  type EditPcbComponentLocationEvent,\n} from \"./manual-edit-events/edit_pcb_component_location_event\"\nimport {\n  edit_schematic_component_location_event,\n  type EditSchematicComponentLocationEvent,\n} from \"./manual-edit-events/edit_schematic_component_location_event\"\nimport {\n  edit_trace_hint_event,\n  type EditTraceHintEvent,\n} from \"./manual-edit-events/edit_trace_hint_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type ManualEditEvent =\n  | EditPcbComponentLocationEvent\n  | EditTraceHintEvent\n  | EditSchematicComponentLocationEvent\n\nexport const manual_edit_event = z.union([\n  edit_pcb_component_location_event,\n  edit_trace_hint_event,\n  edit_schematic_component_location_event,\n])\n\nexport type ManualEditEventInput = z.input<typeof manual_edit_event>\ntype InferredManualEditEvent = z.infer<typeof manual_edit_event>\n\nexpectTypesMatch<ManualEditEvent, InferredManualEditEvent>(true)\n","import { z } from \"zod\"\nimport {\n  manual_pcb_placement,\n  type ManualPcbPlacement,\n} from \"./manual_pcb_placement\"\nimport { manual_edit_event } from \"./manual_edit_event\"\nimport { manual_trace_hint, type ManualTraceHint } from \"./manual_trace_hint\"\nimport {\n  manual_schematic_placement,\n  type ManualSchematicPlacement,\n} from \"./manual_schematic_placement\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_edits_file = z.object({\n  pcb_placements: z.array(manual_pcb_placement).optional(),\n  manual_trace_hints: z.array(manual_trace_hint).optional(),\n  schematic_placements: z.array(manual_schematic_placement).optional(),\n})\n\nexport interface ManualEditsFile {\n  pcb_placements?: ManualPcbPlacement[]\n  manual_trace_hints?: ManualTraceHint[]\n  schematic_placements?: ManualSchematicPlacement[]\n}\n\nexport type ManualEditsFileInput = z.input<typeof manual_edits_file>\n\nexpectTypesMatch<ManualEditsFile, z.infer<typeof manual_edits_file>>(true)\n","import { z } from \"zod\"\nimport { point, type Point } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_pcb_placement = z.object({\n  selector: z.string(),\n  relative_to: z\n    .string()\n    .optional()\n    .default(\"group_center\")\n    .describe(\"Can be a selector or 'group_center'\"),\n  center: point,\n})\n\nexport interface ManualPcbPlacement {\n  selector: string\n  relative_to: string\n  center: Point\n}\n\nexport type ManualPcbPlacementInput = z.input<typeof manual_pcb_placement>\ntype InferredManualPcbPlacement = z.infer<typeof manual_pcb_placement>\n\nexpectTypesMatch<ManualPcbPlacement, InferredManualPcbPlacement>(true)\n","import { z } from \"zod\"\nimport { layer_ref, route_hint_point, type RouteHintPoint } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_trace_hint = z.object({\n  pcb_port_selector: z.string(),\n  offsets: z.array(route_hint_point),\n})\n\nexport interface ManualTraceHint {\n  pcb_port_selector: string\n  offsets: Array<RouteHintPoint>\n}\n\nexport type ManualTraceHintInput = z.input<typeof manual_trace_hint>\n\nexpectTypesMatch<ManualTraceHint, z.infer<typeof manual_trace_hint>>(true)\n","import { z } from \"zod\"\nimport { point, type Point } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_schematic_placement = z.object({\n  selector: z.string(),\n  relative_to: z\n    .string()\n    .optional()\n    .default(\"group_center\")\n    .describe(\"Can be a selector or 'group_center'\"),\n  center: point,\n})\n\nexport interface ManualSchematicPlacement {\n  selector: string\n  relative_to: string\n  center: Point\n}\n\nexport type ManualSchematicPlacementInput = z.input<\n  typeof manual_schematic_placement\n>\ntype InferredManualSchematicPlacement = z.infer<\n  typeof manual_schematic_placement\n>\n\nexpectTypesMatch<ManualSchematicPlacement, InferredManualSchematicPlacement>(\n  true,\n)\n","import { distance } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  type SchematicPortArrangement,\n  schematicPortArrangement as schematicPinArrangement,\n} from \"lib/common/schematicPinDefinitions\"\nimport {\n  type SchematicPinStyle,\n  schematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ChipProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string | readonly string[]>\n  schPinArrangement?: SchematicPortArrangement\n  /** @deprecated Use schPinArrangement instead. */\n  schPortArrangement?: SchematicPortArrangement\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: Distance\n  schWidth?: Distance\n  schHeight?: Distance\n  noSchematicRepresentation?: boolean\n  internallyConnectedPins?: string[][]\n  externallyConnectedPins?: string[][]\n}\n\nexport type PinLabels = Record<\n  number | string,\n  string | readonly string[] | string[]\n>\n\nexport const pinLabelsProp = z.record(\n  z.number().or(z.string()),\n  z.string().or(z.array(z.string()).readonly()).or(z.array(z.string())),\n)\n\nexpectTypesMatch<PinLabels, z.input<typeof pinLabelsProp>>(true)\n\nexport const chipProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z\n    .record(\n      z.number().or(z.string()),\n      z.string().or(z.array(z.string()).readonly()),\n    )\n    .optional(),\n  internallyConnectedPins: z.array(z.array(z.string())).optional(),\n  externallyConnectedPins: z.array(z.array(z.string())).optional(),\n  schPinArrangement: schematicPinArrangement.optional(),\n  schPortArrangement: schematicPinArrangement.optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n  noSchematicRepresentation: z.boolean().optional(),\n})\n\n/**\n * @deprecated Use ChipProps instead.\n */\nexport const bugProps = chipProps\nexport type InferredChipProps = z.input<typeof chipProps>\n\nexpectTypesMatch<InferredChipProps, ChipProps>(true)\n","import { distance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  type SchematicPortArrangement,\n  schematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\nimport {\n  type SchematicPinStyle,\n  schematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface JumperProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string | string[]>\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: number | string\n  schWidth?: number | string\n  schHeight?: number | string\n  schDirection?: \"left\" | \"right\"\n  schPortArrangement?: SchematicPortArrangement\n}\n\nexport const jumperProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z\n    .record(z.number().or(z.string()), z.string().or(z.array(z.string())))\n    .optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n  schDirection: z.enum([\"left\", \"right\"]).optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n})\n\ntype InferredJumperProps = z.input<typeof jumperProps>\nexpectTypesMatch<JumperProps, InferredJumperProps>(true)\n","import { distance } from \"circuit-json\"\nimport type { PcbLayoutProps } from \"lib/common/layout\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { type PortHints, portHints } from \"lib/common/portHints\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface CirclePlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"circle\"\n  holeDiameter: number | string\n  outerDiameter: number | string\n  portHints?: PortHints\n}\n\nexport interface OvalPlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"oval\"\n  outerWidth: number | string\n  outerHeight: number | string\n  innerWidth: number | string\n  innerHeight: number | string\n  portHints?: PortHints\n}\n\nexport interface PillPlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"pill\"\n  outerWidth: number | string\n  outerHeight: number | string\n  innerWidth: number | string\n  innerHeight: number | string\n  portHints?: PortHints\n}\n\nexport type PlatedHoleProps =\n  | CirclePlatedHoleProps\n  | OvalPlatedHoleProps\n  | PillPlatedHoleProps\n\nexport const platedHoleProps = z.discriminatedUnion(\"shape\", [\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"circle\"),\n    holeDiameter: distance,\n    outerDiameter: distance,\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"oval\"),\n    outerWidth: distance,\n    outerHeight: distance,\n    innerWidth: distance,\n    innerHeight: distance,\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"pill\"),\n    outerWidth: distance,\n    outerHeight: distance,\n    innerWidth: distance,\n    innerHeight: distance,\n    portHints: portHints.optional(),\n  }),\n])\n\ntype InferredPlatedHoleProps = z.input<typeof platedHoleProps>\nexpectTypesMatch<PlatedHoleProps, InferredPlatedHoleProps>(true)\n","import { resistance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ResistorProps extends CommonComponentProps {\n  resistance: number | string\n  pullupFor?: string\n  pullupTo?: string\n  pulldownFor?: string\n  pulldownTo?: string\n}\n\nexport const resistorProps = commonComponentProps.extend({\n  resistance,\n\n  pullupFor: z.string().optional(),\n  pullupTo: z.string().optional(),\n\n  pulldownFor: z.string().optional(),\n  pulldownTo: z.string().optional(),\n})\nexport const resistorPins = lrPins\n\ntype InferredResistorProps = z.input<typeof resistorProps>\nexpectTypesMatch<ResistorProps, InferredResistorProps>(true)\n","import { resistance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport type { z } from \"zod\"\n\nexport interface PotentiometerProps extends CommonComponentProps {\n  maxResistance: number | string\n}\n\nexport const potentiometerProps = commonComponentProps.extend({\n  maxResistance: resistance,\n})\nexport const potentiometerPins = lrPins\n\ntype InferredPotentiometerProps = z.input<typeof potentiometerProps>\nexpectTypesMatch<PotentiometerProps, InferredPotentiometerProps>(true)\n","import { frequency, capacitance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type PinVariant = \"2pin\" | \"4pin\"\n\nexport interface CrystalProps extends CommonComponentProps {\n  frequency: number | string\n  loadCapacitance: number | string\n  pinVariant?: PinVariant\n}\n\nexport const crystalProps = commonComponentProps.extend({\n  frequency: frequency,\n  loadCapacitance: capacitance,\n  pinVariant: z.enum([\"2pin\", \"4pin\"]).optional(),\n})\nexport const crystalPins = lrPins\n\ntype InferredCrystalProps = z.input<typeof crystalProps>\nexpectTypesMatch<CrystalProps, InferredCrystalProps>(true)\n","import { frequency, capacitance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type ResonatorPinVariant = \"no_ground\" | \"ground_pin\" | \"two_ground_pins\"\n\nexport interface ResonatorProps extends CommonComponentProps {\n  frequency: number | string\n  loadCapacitance: number | string\n  pinVariant?: ResonatorPinVariant\n}\n\nexport const resonatorProps = commonComponentProps.extend({\n  frequency: frequency,\n  loadCapacitance: capacitance,\n  pinVariant: z.enum([\"no_ground\", \"ground_pin\", \"two_ground_pins\"]).optional(),\n})\n\ntype InferredResonatorProps = z.input<typeof resonatorProps>\nexpectTypesMatch<ResonatorProps, InferredResonatorProps>(true)\n","import { capacitance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPolarPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface CapacitorProps extends CommonComponentProps {\n  capacitance: number | string\n  polarized?: boolean\n  decouplingFor?: string\n  decouplingTo?: string\n  bypassFor?: string\n  bypassTo?: string\n  maxDecouplingTraceLength?: number\n}\n\nexport const capacitorProps = commonComponentProps.extend({\n  capacitance,\n  polarized: z.boolean().optional().default(false),\n  decouplingFor: z.string().optional(),\n  decouplingTo: z.string().optional(),\n  bypassFor: z.string().optional(),\n  bypassTo: z.string().optional(),\n  maxDecouplingTraceLength: z.number().optional(),\n})\nexport const capacitorPins = lrPolarPins\n\nexpectTypesMatch<CapacitorProps, z.input<typeof capacitorProps>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface NetProps {\n  name: string\n}\n\nexport const netProps = z.object({\n  name: z.string(),\n})\n\ntype InferredNetProps = z.input<typeof netProps>\nexpectTypesMatch<NetProps, InferredNetProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ConstrainedLayoutProps {\n  name?: string\n  pcbOnly?: boolean\n  schOnly?: boolean\n}\n\nexport const constrainedLayoutProps = z.object({\n  name: z.string().optional(),\n  pcbOnly: z.boolean().optional(),\n  schOnly: z.boolean().optional(),\n})\n\nexport type InferredConstrainedLayoutProps = z.input<\n  typeof constrainedLayoutProps\n>\n\nexpectTypesMatch<InferredConstrainedLayoutProps, ConstrainedLayoutProps>(true)\n","import { z } from \"zod\"\n\nexport type Distance = number | string\n\nexport { distance, length } from \"circuit-json\"\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport type { Distance } from \"lib/common/distance\"\nimport { distance } from \"lib/common/distance\"\nimport { z } from \"zod\"\n\nexport type PcbXDistConstraint = {\n  pcb?: true\n  xDist: Distance\n\n  /**\n   * Selector for left component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  left: string\n\n  /**\n   * Selector for right component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  right: string\n\n  /**\n   * If true, the provided distance is the distance between the closest edges of\n   * the left and right components\n   */\n  edgeToEdge?: true\n\n  /**\n   * If true, the provided distance is the distance between the centers of the\n   * left and right components\n   */\n  centerToCenter?: true\n}\n\nexport type PcbYDistConstraint = {\n  pcb?: true\n  yDist: Distance\n\n  /**\n   * Selector for top component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 topedge\", \".R1 center\"\n   */\n  top: string\n\n  /**\n   * Selector for bottom component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 bottomedge\", \".R1 center\"\n   */\n  bottom: string\n\n  edgeToEdge?: true\n  centerToCenter?: true\n}\n\nexport type PcbSameYConstraint = {\n  pcb?: true\n  sameY?: true\n\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type PcbSameXConstraint = {\n  pcb?: true\n  sameX?: true\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type ConstraintProps =\n  | PcbXDistConstraint\n  | PcbYDistConstraint\n  | PcbSameYConstraint\n  | PcbSameXConstraint\n\n// -----------------------------------------------------------------------------\n// Zod\n// -----------------------------------------------------------------------------\n\nexport const pcbXDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  xDist: distance,\n  left: z.string(),\n  right: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbXDistConstraint, z.input<typeof pcbXDistConstraintProps>>(\n  true,\n)\n\nexport const pcbYDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  yDist: distance,\n  top: z.string(),\n  bottom: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbYDistConstraint, z.input<typeof pcbYDistConstraintProps>>(\n  true,\n)\n\nexport const pcbSameYConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameY: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameYConstraint, z.input<typeof pcbSameYConstraintProps>>(\n  true,\n)\n\nexport const pcbSameXConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameX: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameXConstraint, z.input<typeof pcbSameXConstraintProps>>(\n  true,\n)\n\nexport const constraintProps = z.union([\n  pcbXDistConstraintProps,\n  pcbYDistConstraintProps,\n  pcbSameYConstraintProps,\n  pcbSameXConstraintProps,\n])\n\nexpectTypesMatch<ConstraintProps, z.input<typeof constraintProps>>(true)\n","import {\n  pcbLayoutProps,\n  type CommonLayoutProps,\n  type PcbLayoutProps,\n} from \"lib/common/layout\"\nimport { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { portHints, type PortHints } from \"lib/common/portHints\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n  portHints?: PortHints\n}\n\nexport interface RotatedRectSmtPadProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rotated_rect\"\n  width: Distance\n  height: Distance\n  ccwRotation: number\n  portHints?: PortHints\n}\n\nexport interface CircleSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n  portHints?: PortHints\n}\n\nexport interface PillSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"pill\"\n  width: Distance\n  height: Distance\n  radius: Distance\n  portHints?: PortHints\n}\n\nexport type SmtPadProps =\n  | RectSmtPadProps\n  | CircleSmtPadProps\n  | RotatedRectSmtPadProps\n  | PillSmtPadProps\n\n// ----------------------------------------------------------------------------\n// Zod\n// ----------------------------------------------------------------------------\n\nexport const rectSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredRectSmtPadProps = z.input<typeof rectSmtPadProps>\nexpectTypesMatch<InferredRectSmtPadProps, RectSmtPadProps>(true)\n\nexport const rotatedRectSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rotated_rect\"),\n    width: distance,\n    height: distance,\n    ccwRotation: z.number(),\n    portHints: portHints.optional(),\n  })\ntype InferredRotatedRectSmtPadProps = z.input<typeof rotatedRectSmtPadProps>\nexpectTypesMatch<InferredRotatedRectSmtPadProps, RotatedRectSmtPadProps>(true)\n\nexport const circleSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredCircleSmtPadProps = z.input<typeof circleSmtPadProps>\nexpectTypesMatch<InferredCircleSmtPadProps, CircleSmtPadProps>(true)\n\nexport const pillSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"pill\"),\n    width: distance,\n    height: distance,\n    radius: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredPillSmtPadProps = z.input<typeof pillSmtPadProps>\nexpectTypesMatch<InferredPillSmtPadProps, PillSmtPadProps>(true)\n\nexport const smtPadProps = z.union([\n  circleSmtPadProps,\n  rectSmtPadProps,\n  rotatedRectSmtPadProps,\n  pillSmtPadProps,\n])\n\nexport type InferredSmtPadProps = z.input<typeof smtPadProps>\nexpectTypesMatch<InferredSmtPadProps, SmtPadProps>(true)\n","import { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { boolean, string, z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n}\n\nexport interface CircleSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n}\n\nexport type SolderPasteProps = RectSolderPasteProps | CircleSolderPasteProps\n\n// zod\n\nexport const rectSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  })\ntype InferredRectSolderPasteProps = z.input<typeof rectSolderPasteProps>\nexpectTypesMatch<InferredRectSolderPasteProps, RectSolderPasteProps>(true)\n\nexport const circleSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  })\ntype InferredCircleSolderPasteProps = z.input<typeof circleSolderPasteProps>\nexpectTypesMatch<InferredCircleSolderPasteProps, CircleSolderPasteProps>(true)\n\nexport const solderPasteProps = z.union([\n  circleSolderPasteProps,\n  rectSolderPasteProps,\n])\n\nexport type InferredSolderPasteProps = z.input<typeof solderPasteProps>\nexpectTypesMatch<InferredSolderPasteProps, SolderPasteProps>(true)\n","import { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface HoleProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  name?: string\n  diameter?: Distance\n  radius?: Distance\n}\n\nexport const holeProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    name: z.string().optional(),\n    diameter: distance.optional(),\n    radius: distance.optional(),\n  })\n  .transform((d) => ({\n    ...d,\n    diameter: d.diameter ?? 2 * d.radius!,\n    radius: d.radius ?? d.diameter! / 2,\n  }))\n\nexport type InferredHoleProps = z.input<typeof holeProps>\n\nexpectTypesMatch<HoleProps, InferredHoleProps>(true)\n","import { distance, route_hint_point } from \"circuit-json\"\nimport { z } from \"zod\"\nimport { point } from \"../common/point\"\n\nexport const portRef = z.union([\n  z.string(),\n  z.custom<{ getPortSelector: () => string }>((v) =>\n    Boolean(v.getPortSelector),\n  ),\n])\n\nconst baseTraceProps = z.object({\n  key: z.string().optional(),\n  thickness: distance.optional(),\n  schematicRouteHints: z.array(point).optional(),\n  pcbRouteHints: z.array(route_hint_point).optional(),\n  schDisplayLabel: z.string().optional(),\n  maxLength: distance.optional(),\n})\n\nexport const traceProps = z.union([\n  baseTraceProps.extend({\n    path: z.array(portRef),\n  }),\n  baseTraceProps.extend({\n    from: portRef,\n    to: portRef,\n  }),\n])\n\nexport type TraceProps = z.input<typeof traceProps>\n","import { type LayerRef, layer_ref } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface FootprintProps {\n  /**\n   * The layer that the footprint is designed for. If you set this to \"top\"\n   * then it means the children were intended to represent the top layer. If\n   * the <chip /> with this footprint is moved to the bottom layer, then the\n   * components will be mirrored.\n   *\n   * Generally, you shouldn't set this except where it can help prevent\n   * confusion because you have a complex multi-layer footprint. Default is\n   * \"top\" and this is most intuitive.\n   */\n  originalLayer?: LayerRef\n}\n\nexport const footprintProps = z.object({\n  originalLayer: layer_ref.default(\"top\").optional(),\n})\n\nexport type FootprintPropsInput = z.input<typeof footprintProps>\ntype InferredFootprintProps = z.infer<typeof footprintProps>\nexpectTypesMatch<InferredFootprintProps, FootprintProps>(true)\n","import { z } from \"zod\"\nimport {\n  commonComponentProps,\n  lrPins,\n  lrPolarPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\n/** @deprecated use battery_capacity from circuit-json when circuit-json is updated */\nconst capacity = z\n  .number()\n  .or(z.string().endsWith(\"mAh\"))\n  .transform((v) => {\n    if (typeof v === \"string\") {\n      const valString = v.replace(\"mAh\", \"\")\n      const num = Number.parseFloat(valString)\n      if (Number.isNaN(num)) {\n        throw new Error(\"Invalid capacity\")\n      }\n      return num\n    }\n    return v\n  })\n  .describe(\"Battery capacity in mAh\")\n\nexport interface BatteryProps extends CommonComponentProps {\n  capacity?: number | string\n}\n\nexport const batteryProps = commonComponentProps.extend({\n  capacity: capacity.optional(),\n})\nexport const batteryPins = lrPolarPins\n\nexpectTypesMatch<BatteryProps, z.input<typeof batteryProps>>(true)\n","import { distance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface PinHeaderProps extends CommonComponentProps {\n  /**\n   * Number of pins in the header\n   */\n  pinCount: number\n\n  /**\n   * Distance between pins\n   */\n  pitch?: number | string\n\n  /**\n   * Schematic facing direction\n   */\n  schFacingDirection?: \"up\" | \"down\" | \"left\" | \"right\"\n\n  /**\n   * Whether the header is male or female\n   */\n  gender?: \"male\" | \"female\"\n\n  /**\n   * Whether to show pin labels in silkscreen\n   */\n  showSilkscreenPinLabels?: boolean\n\n  /**\n   * Whether the header has two rows of pins\n   */\n  doubleRow?: boolean\n\n  /**\n   * Diameter of the through-hole for each pin\n   */\n  holeDiameter?: number | string\n\n  /**\n   * Diameter of the plated area around each hole\n   */\n  platedDiameter?: number | string\n\n  /**\n   * Labels for each pin\n   */\n  pinLabels?: string[]\n\n  /**\n   * Direction the header is facing\n   */\n  facingDirection?: \"left\" | \"right\"\n}\n\nexport const pinHeaderProps = commonComponentProps.extend({\n  pinCount: z.number(),\n  pitch: distance.optional(),\n  schFacingDirection: z.enum([\"up\", \"down\", \"left\", \"right\"]).optional(),\n  gender: z.enum([\"male\", \"female\"]).optional().default(\"male\"),\n  showSilkscreenPinLabels: z.boolean().optional(),\n  doubleRow: z.boolean().optional(),\n  holeDiameter: distance.optional(),\n  platedDiameter: distance.optional(),\n  pinLabels: z.array(z.string()).optional(),\n  facingDirection: z.enum([\"left\", \"right\"]).optional(),\n})\n\ntype InferredPinHeaderProps = z.input<typeof pinHeaderProps>\nexpectTypesMatch<PinHeaderProps, InferredPinHeaderProps>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { distance } from \"lib/common/distance\"\nimport { rotation } from \"circuit-json\"\n\nexport interface NetAliasProps {\n  net?: string\n  schX?: number | string\n  schY?: number | string\n  schRotation?: number | string\n  anchorSide?: \"left\" | \"up\" | \"right\" | \"down\"\n}\n\nexport const netAliasProps = z.object({\n  net: z.string().optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  anchorSide: z.enum([\"left\", \"up\", \"right\", \"down\"]).optional(),\n})\n\ntype InferredNetAliasProps = z.input<typeof netAliasProps>\nexpectTypesMatch<NetAliasProps, InferredNetAliasProps>(true)\n","import {\n  commonComponentProps,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface PushButtonProps extends CommonComponentProps {\n  internallyConnectedPins?: string[][]\n}\n\nexport const pushButtonProps = commonComponentProps.extend({\n  internallyConnectedPins: z.array(z.array(z.string())).optional(),\n})\ntype InferredPushButtonProps = z.input<typeof pushButtonProps>\n\nexpectTypesMatch<PushButtonProps, InferredPushButtonProps>(true)\n","import type { SubcircuitGroupProps } from \"./group\"\nimport { subcircuitGroupProps } from \"./group\"\nimport type { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type SubcircuitProps = SubcircuitGroupProps\n\nexport const subcircuitProps = subcircuitGroupProps\n\ntype InferredSubcircuitProps = z.input<typeof subcircuitProps>\nexpectTypesMatch<SubcircuitProps, InferredSubcircuitProps>(true)\n","import {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface TransistorProps extends CommonComponentProps {\n  type: \"npn\" | \"pnp\" | \"bjt\" | \"jfet\" | \"mosfet\"\n}\n\nexport const transistorProps = commonComponentProps.extend({\n  type: z.enum([\"npn\", \"pnp\", \"bjt\", \"jfet\", \"mosfet\"]),\n})\n\nexport const transistorPins = [\n  \"pin1\",\n  \"emitter\",\n  \"pin2\",\n  \"collector\",\n  \"pin3\",\n  \"base\",\n] as const\n\ntype InferredTransistorProps = z.input<typeof transistorProps>\nexpectTypesMatch<TransistorProps, InferredTransistorProps>(true)\n","import {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"../common/layout\"\nimport { expectTypesMatch } from \"../typecheck\"\nimport { z } from \"zod\"\n\nexport interface MosfetProps extends CommonComponentProps {\n  channelType: \"n\" | \"p\"\n  mosfetMode: \"enhancement\" | \"depletion\"\n}\n\nexport const mosfetProps = commonComponentProps.extend({\n  channelType: z.enum([\"n\", \"p\"]),\n  mosfetMode: z.enum([\"enhancement\", \"depletion\"]),\n})\n\nexport const mosfetPins = [\n  \"pin1\",\n  \"drain\",\n  \"pin2\",\n  \"source\",\n  \"pin3\",\n  \"gate\",\n] as const\n\ntype InferredMosfetProps = z.input<typeof mosfetProps>\nexpectTypesMatch<MosfetProps, InferredMosfetProps>(true)\n","import { inductance } from \"circuit-json\"\nimport { commonComponentProps, lrPins } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const inductorProps = commonComponentProps.extend({\n  inductance,\n})\nexport const inductorPins = lrPins\nexport type InductorProps = z.input<typeof inductorProps>\n","import { commonComponentProps, lrPolarPins } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const diodeProps = commonComponentProps.extend({})\nexport const diodePins = lrPolarPins\nexport type DiodeProps = z.input<typeof diodeProps>\n","import { commonComponentProps, lrPolarPins } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const ledProps = commonComponentProps.extend({\n  color: z.string().optional(),\n})\nexport const ledPins = lrPolarPins\nexport type LedProps = z.input<typeof ledProps>\n","import {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nimport { z } from \"zod\"\n\nexport interface SwitchProps extends CommonComponentProps {\n  ftype: \"switch\"\n  type?: \"spst\" | \"spdt\" | \"dpst\" | \"dpdt\"\n  isNormallyClosed?: boolean\n  spdt?: boolean\n  spst?: boolean\n  dpst?: boolean\n  dpdt?: boolean\n}\n\nexport const switchProps = commonComponentProps\n  .extend({\n    ftype: z.literal(\"switch\"),\n    type: z.enum([\"spst\", \"spdt\", \"dpst\", \"dpdt\"]).optional(),\n    isNormallyClosed: z.boolean().optional().default(false),\n  })\n  .transform((props) => {\n    // Add boolean properties based on 'type'\n    const updatedProps: SwitchProps = { ...props }\n    switch (updatedProps.type) {\n      case \"spdt\":\n        updatedProps.spdt = true\n        break\n      case \"spst\":\n        updatedProps.spst = true\n        break\n      case \"dpst\":\n        updatedProps.dpst = true\n        break\n      case \"dpdt\":\n        updatedProps.dpdt = true\n        break\n    }\n\n    return updatedProps\n  })\n\nexport type InferredSwitchProps = z.infer<typeof switchProps>\nexpectTypesMatch<SwitchProps, InferredSwitchProps>(true)\n","import { length } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const fabricationNoteTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n  color: z.string().optional(),\n})\nexport type FabricationNoteTextProps = z.input<typeof fabricationNoteTextProps>\n","import { length, route_hint_point } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const fabricationNotePathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n    color: z.string().optional(),\n  })\nexport type FabricationNotePathProps = z.input<typeof fabricationNotePathProps>\n","import { distance, route_hint_point } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const pcbTraceProps = z.object({\n  layer: z.string().optional(),\n  thickness: distance.optional(),\n  route: z.array(route_hint_point),\n})\nexport type PcbTraceProps = z.input<typeof pcbTraceProps>\n","import { distance, layer_ref } from \"circuit-json\"\nimport { commonLayoutProps } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const viaProps = commonLayoutProps.extend({\n  fromLayer: layer_ref,\n  toLayer: layer_ref,\n  holeDiameter: distance,\n  outerDiameter: distance,\n})\nexport type ViaProps = z.input<typeof viaProps>\n","import { distance } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const pcbKeepoutProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true }).extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  }),\n  pcbLayoutProps.extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  }),\n])\nexport type PcbKeepoutProps = z.input<typeof pcbKeepoutProps>\n","import { voltage } from \"circuit-json\"\nimport { commonComponentProps } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const powerSourceProps = commonComponentProps.extend({\n  voltage,\n})\nexport type PowerSourceProps = z.input<typeof powerSourceProps>\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const schematicBoxProps = z.object({\n  schX: distance,\n  schY: distance,\n  width: distance,\n  height: distance,\n})\nexport type SchematicBoxProps = z.input<typeof schematicBoxProps>\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const schematicLineProps = z.object({\n  x1: distance,\n  y1: distance,\n  x2: distance,\n  y2: distance,\n})\nexport type SchematicLineProps = z.input<typeof schematicLineProps>\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const schematicTextProps = z.object({\n  schX: distance,\n  schY: distance,\n  text: z.string(),\n})\nexport type SchematicTextProps = z.input<typeof schematicTextProps>\n","import { point } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const schematicPathProps = z.object({\n  points: z.array(point),\n  isFilled: z.boolean().optional().default(false),\n  fillColor: z.enum([\"red\", \"blue\"]).optional(),\n})\nexport type SchematicPathProps = z.input<typeof schematicPathProps>\n","import { length } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const silkscreenTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n})\nexport type SilkscreenTextProps = z.input<typeof silkscreenTextProps>\n","import { length, route_hint_point } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const silkscreenPathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n  })\nexport type SilkscreenPathProps = z.input<typeof silkscreenPathProps>\n","import { distance } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const silkscreenLineProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    strokeWidth: distance,\n    x1: distance,\n    y1: distance,\n    x2: distance,\n    y2: distance,\n  })\nexport type SilkscreenLineProps = z.input<typeof silkscreenLineProps>\n","import { distance } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const silkscreenRectProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    width: distance,\n    height: distance,\n  })\nexport type SilkscreenRectProps = z.input<typeof silkscreenRectProps>\n","import { distance } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const silkscreenCircleProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    radius: distance,\n  })\nexport type SilkscreenCircleProps = z.input<typeof silkscreenCircleProps>\n","import { distance, layer_ref, route_hint_point } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const routeHintPointProps = z.object({\n  x: distance,\n  y: distance,\n  via: z.boolean().optional(),\n  toLayer: layer_ref.optional(),\n})\n\nexport const traceHintProps = z.object({\n  for: z\n    .string()\n    .optional()\n    .describe(\n      \"Selector for the port you're targeting, not required if you're inside a trace\",\n    ),\n  order: z.number().optional(),\n  offset: route_hint_point.or(routeHintPointProps).optional(),\n  offsets: z\n    .array(route_hint_point)\n    .or(z.array(routeHintPointProps))\n    .optional(),\n  traceWidth: z.number().optional(),\n})\n\nexport type TraceHintProps = z.input<typeof traceHintProps>\n","import { direction } from \"lib/common/direction\"\nimport { commonLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const portProps = commonLayoutProps.extend({\n  name: z.string(),\n  pinNumber: z.number().optional(),\n  aliases: z.array(z.string()).optional(),\n  direction: direction,\n})\nexport type PortProps = z.input<typeof portProps>\n"],"mappings":";AAYO,IAAM,mBAAmB,CAO9B,aAOS;AAAC;AAIZ,iBAQE,eAAe;AAEjB,iBAQE,iBAAiB;AAEnB,iBAOE,IAAI;AAEN,iBAOE,iCAAiC;;;ACjEnC,SAAS,SAAS;AACX,IAAM,YAAY,EAAE,KAAK,CAAC,MAAM,QAAQ,QAAQ,OAAO,CAAC;AASxD,IAAM,qBAAqB,EAAE,KAAK;AAAA,EACvC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAuD,IAAI;AAC3D,iBAAyE,IAAI;;;ACnB7E,SAAS,KAAAA,UAAS;AAGX,IAAM,YAAYC,GAAE,MAAMA,GAAE,OAAO,EAAE,GAAGA,GAAE,OAAO,CAAC,CAAC;AAG1D,iBAAuD,IAAI;;;ACN3D;AAAA,EAEE,YAAAC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,OACK;AAEP,SAAS,KAAAC,UAAS;;;ACRlB,SAAS,KAAAC,UAAS;;;ACAlB,SAAS,gBAAgB;AACzB,SAAS,KAAAC,UAAS;AAEX,IAAM,SAASA,GAAE,OAAO;AAAA,EAC7B,GAAG;AAAA,EACH,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ADHM,IAAM,iBAAiBC,GAAE,OAAO;AAAA,EACrC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AACrC,CAAC;AAcM,IAAM,eAAeA,GAAE,OAAO;AAAA,EACnC,gBAAgBA,GAAE,OAAO,EAAE,GAAG,cAAc,EAAE,SAAS;AAAA,EACvD,gBAAgB,OAAO,SAAS;AAAA,EAChC,MAAM,OAAO,SAAS;AACxB,CAAC;AAED,iBAA6D,IAAI;AAK1D,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQA,GAAE,OAAO;AACnB,CAAC;AAMM,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQA,GAAE,OAAO;AAAA,EACjB,QAAQA,GAAE,OAAO,EAAE,SAAS;AAC9B,CAAC;AAKM,IAAM,gBAAgB,aAAa,OAAO;AAAA,EAC/C,OAAOA,GAAE,OAAOA,GAAE,IAAI,CAAC;AACzB,CAAC;AAIM,IAAM,eAAeA,GAAE,MAAM;AAAA,EAClCA,GAAE,OAAO;AAAA,EACT;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAqD,IAAI;;;AE7DzD,SAAS,KAAAC,UAAS;AAoBX,IAAM,gBAAgBA,GAAE,OAAkB,CAAC,MAAM,IAAI;;;AHUrD,IAAM,iBAAiBC,GAAE,OAAO;AAAA,EACrC,MAAMC,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,OAAO,UAAU,SAAS;AAC5B,CAAC;AAED,iBAAyD,IAAI;AAEtD,IAAM,oBAAoBD,GAAE,OAAO;AAAA,EACxC,MAAMC,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,MAAMA,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,OAAO,UAAU,SAAS;AAAA,EAC1B,WAAW,cAAc,SAAS;AACpC,CAAC;AAGD,iBAA+D,IAAI;AAa5D,IAAM,gBAAgBD,GAAE,OAAO;AAAA,EACpC,qBAAqBA,GAAE,OAAO,eAAeA,GAAE,MAAMA,GAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAC7E,CAAC;AAED,iBAA+D,IAAI;AAW5D,IAAM,uBAAuB,kBACjC,MAAM,aAAa,EACnB,OAAO;AAAA,EACN,KAAKA,GAAE,IAAI,EAAE,SAAS;AAAA,EACtB,MAAMA,GAAE,OAAO;AAAA,EACf,UAAU,aAAa,SAAS;AAAA,EAChC,UAAUA,GAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,YAAYA,GAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAGH,iBAAqE,IAAI;AAElE,IAAM,iBAAiB;AAGvB,IAAM,SAAS,CAAC,QAAQ,QAAQ,QAAQ,OAAO;AAC/C,IAAM,cAAc;AAAA,EACzB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAEO,IAAM,uBAAuBC,UAAS,GAAGD,GAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;;;AI5G1E,SAAS,KAAAE,UAAS;AAiDX,IAAM,4BAA4BA,GAAE,OAAO;AAAA,EAChD,MAAMA,GAAE,MAAMA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC,CAAC;AAAA,EAC/C,WAAWA,GAAE,MAAM;AAAA,IACjBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,EAC3B,CAAC;AACH,CAAC;AAKM,IAAM,2BAA2BA,GAAE,OAAO;AAAA,EAC/C,UAAUA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,+BAA+B;AAAA,EACxE,SAASA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,8BAA8B;AAAA,EACtE,WAAWA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,gCAAgC;AAAA,EAC1E,YAAYA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,iCAAiC;AAAA,EAC5E,cAAcA,GAAE,OAAO,EAAE,SAAS;AAAA,EAClC,eAAeA,GAAE,OAAO,EAAE,SAAS;AAAA,EACnC,aAAaA,GAAE,OAAO,EAAE,SAAS;AAAA,EACjC,gBAAgBA,GAAE,OAAO,EAAE,SAAS;AAAA,EACpC,UAAU,0BAA0B,SAAS;AAAA,EAC7C,WAAW,0BAA0B,SAAS;AAAA,EAC9C,SAAS,0BAA0B,SAAS;AAAA,EAC5C,YAAY,0BAA0B,SAAS;AACjD,CAAC;AAEM,IAAM,0BAA0B;AAEvC,iBAGE,IAAI;;;ACnFN,SAAS,YAAAC,iBAAgB;AAEzB,SAAS,KAAAC,UAAS;AAqBX,IAAM,oBAAoBA,GAAE;AAAA,EACjCA,GAAE,OAAO;AAAA,IACP,YAAYC,UAAS,SAAS;AAAA,IAC9B,aAAaA,UAAS,SAAS;AAAA,IAC/B,WAAWA,UAAS,SAAS;AAAA,IAC7B,cAAcA,UAAS,SAAS;AAAA,IAEhC,YAAYA,UAAS,SAAS;AAAA,IAC9B,aAAaA,UAAS,SAAS;AAAA,IAC/B,WAAWA,UAAS,SAAS;AAAA,IAC7B,cAAcA,UAAS,SAAS;AAAA,EAClC,CAAC;AACH;AAEA,iBAAuE,IAAI;;;ACpC3E,SAAS,YAAAC,iBAAgB;;;ACDzB,SAAS,YAAAC,iBAAgB;AACzB,SAAS,KAAAC,UAAS;AAEX,IAAM,QAAQA,GAAE,OAAO;AAAA,EAC5B,GAAGD;AAAA,EACH,GAAGA;AACL,CAAC;;;ADDD,SAAS,KAAAE,WAAS;;;AEJlB,SAAS,cAAc;AAQvB,SAAS,KAAAC,WAAS;;;ACRlB,SAAS,KAAAC,WAAS;AAEX,IAAM,yBAAyBA,IAAE,OAAO;AAAA,EAC7C,eAAeA,IAAE,OAAO;AAAA,EACxB,aAAaA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAClC,YAAYA,IAAE,OAAO;AACvB,CAAC;AAUD;AAAA,EACE;AACF;;;ACnBA,SAAS,KAAAC,WAAS;AAOX,IAAM,oCAAoC,uBAAuB,OAAO;AAAA,EAC7E,qBAAqBC,IAClB,QAAQ,yBAAyB,EACjC,SAAS,YAAY;AAAA,EACxB,iBAAiBA,IAAE,QAAQ,6BAA6B;AAAA,EACxD,kBAAkBA,IAAE,OAAO;AAAA,EAC3B,iBAAiBA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AAAA,EAC1D,YAAYA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AACvD,CAAC;AAGM,IAAM,gCAAgC;AAe7C,iBAGE,IAAI;;;ACpCN,SAAS,KAAAC,WAAS;AAMlB,OAAiC;AAE1B,IAAM,wBAAwB,uBAAuB,OAAO;AAAA,EACjE,qBAAqBC,IAAE,QAAQ,iBAAiB,EAAE,SAAS,YAAY;AAAA,EACvE,iBAAiBA,IAAE,QAAQ,qBAAqB,EAAE,SAAS;AAAA,EAC3D,aAAaA,IAAE,OAAO;AAAA,EACtB,mBAAmBA,IAAE,OAAO,EAAE,SAAS;AAAA,EACvC,OAAOA,IAAE;AAAA,IACPA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,GAAG,KAAKA,IAAE,QAAQ,EAAE,SAAS,EAAE,CAAC;AAAA,EACxE;AACF,CAAC;AAaD;AAAA,EACE;AACF;;;AC/BA,SAAS,KAAAC,WAAS;AAOX,IAAM,0CACX,uBAAuB,OAAO;AAAA,EAC5B,iBAAiBC,IAAE,QAAQ,mCAAmC;AAAA,EAC9D,wBAAwBA,IAAE,OAAO;AAAA,EACjC,iBAAiBA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AAAA,EAC1D,YAAYA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AACvD,CAAC;AAcH,iBAGE,IAAI;;;AC9BN,SAAS,KAAAC,WAAS;AAoBX,IAAM,oBAAoBC,IAAE,MAAM;AAAA,EACvC;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAKD,iBAA2D,IAAI;;;AC7B/D,SAAS,KAAAC,WAAS;;;ACAlB,SAAS,KAAAC,WAAS;AAClB,SAAS,SAAAC,cAAyB;AAG3B,IAAM,uBAAuBC,IAAE,OAAO;AAAA,EAC3C,UAAUA,IAAE,OAAO;AAAA,EACnB,aAAaA,IACV,OAAO,EACP,SAAS,EACT,QAAQ,cAAc,EACtB,SAAS,qCAAqC;AAAA,EACjD,QAAQC;AACV,CAAC;AAWD,iBAAiE,IAAI;;;ACvBrE,SAAS,KAAAC,WAAS;AAClB,SAAoB,oBAAAC,yBAA6C;AAG1D,IAAM,oBAAoBC,IAAE,OAAO;AAAA,EACxC,mBAAmBA,IAAE,OAAO;AAAA,EAC5B,SAASA,IAAE,MAAMC,iBAAgB;AACnC,CAAC;AASD,iBAAqE,IAAI;;;AChBzE,SAAS,KAAAC,WAAS;AAClB,SAAS,SAAAC,cAAyB;AAG3B,IAAM,6BAA6BC,IAAE,OAAO;AAAA,EACjD,UAAUA,IAAE,OAAO;AAAA,EACnB,aAAaA,IACV,OAAO,EACP,SAAS,EACT,QAAQ,cAAc,EACtB,SAAS,qCAAqC;AAAA,EACjD,QAAQC;AACV,CAAC;AAeD;AAAA,EACE;AACF;;;AHhBO,IAAM,oBAAoBC,IAAE,OAAO;AAAA,EACxC,gBAAgBA,IAAE,MAAM,oBAAoB,EAAE,SAAS;AAAA,EACvD,oBAAoBA,IAAE,MAAM,iBAAiB,EAAE,SAAS;AAAA,EACxD,sBAAsBA,IAAE,MAAM,0BAA0B,EAAE,SAAS;AACrE,CAAC;AAUD,iBAAqE,IAAI;;;AN0BlE,IAAM,mBAAmBC,IAAE,OAAO;AAAA,EACvC,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,aAAaA,IAAE,KAAK,CAAC,cAAc,cAAc,CAAC,EAAE,SAAS;AAAA,EAC7D,YAAYA,IAAE,KAAK,CAAC,OAAO,gBAAgB,CAAC,EAAE,SAAS;AAAA,EACvD,oBAAoBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EACzC,OAAOA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EACrD,WAAWA,IAAE,KAAK,CAAC,oBAAoB,YAAY,CAAC,EAAE,SAAS;AAAA,EAC/D,OAAOA,IAAE,QAAQ,EAAE,SAAS;AAC9B,CAAC;AAEM,IAAM,iBAAiBA,IAAE,MAAM;AAAA,EACpC;AAAA,EACAA,IAAE,QAAQ,kBAAkB;AAAA,EAC5BA,IAAE,QAAQ,YAAY;AAAA,EACtBA,IAAE,QAAQ,MAAM;AAAA,EAChBA,IAAE,QAAQ,YAAY;AAAA,EACtBA,IAAE,QAAQ,YAAY;AACxB,CAAC;AAqCM,IAAM,iBAAiB,kBAAkB,OAAO;AAAA,EACrD,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAUA,IAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,KAAKA,IAAE,IAAI,EAAE,SAAS;AACxB,CAAC;AAEM,IAAM,uBAAuB,eAAe,OAAO;AAAA,EACxD,QAAQA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EACtD,aAAa,kBAAkB,SAAS;AAAA,EACxC,sBAAsBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC3C,0BAA0BA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC/C,iBAAiBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EACtC,mBAAmB,OAAO,SAAS;AAAA,EACnC,eAAe,OAAO,SAAS;AAAA,EAC/B,aAAaA,IAAE,OAAoB,CAAC,MAAM,cAAc,CAAC,EAAE,SAAS;AAAA,EACpE,eAAeA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EAC7D,YAAY,eAAe,SAAS;AACtC,CAAC;AAEM,IAAM,+BAA+B,qBAAqB,OAAO;AAAA,EACtE,YAAYA,IAAE,QAAQ,IAAI;AAC5B,CAAC;AAEM,IAAM,aAAaA,IAAE,mBAAmB,cAAc;AAAA,EAC3D,eAAe,OAAO,EAAE,YAAYA,IAAE,QAAQ,KAAK,EAAE,SAAS,EAAE,CAAC;AAAA,EACjE;AACF,CAAC;AAOD,iBAAyD,IAAI;AAC7D,iBAGE,IAAI;AAGN,iBAAiD,IAAI;;;AFnI9C,IAAM,aAAa,qBAAqB,OAAO;AAAA,EACpD,OAAOC,UAAS,SAAS;AAAA,EACzB,QAAQA,UAAS,SAAS;AAAA,EAC1B,SAASC,IAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EACjC,gBAAgBD,UAAS,SAAS;AAAA,EAClC,gBAAgBA,UAAS,SAAS;AACpC,CAAC;AAGD,iBAAiD,IAAI;;;AYzBrD,SAAS,YAAAE,iBAAgB;AAezB,SAAS,KAAAC,WAAS;AAsBX,IAAM,gBAAgBA,IAAE;AAAA,EAC7BA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC;AAAA,EACxBA,IAAE,OAAO,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS,CAAC,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC;AACtE;AAEA,iBAA2D,IAAI;AAExD,IAAM,YAAY,qBAAqB,OAAO;AAAA,EACnD,wBAAwBA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAWA,IACR;AAAA,IACCA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC;AAAA,IACxBA,IAAE,OAAO,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS,CAAC;AAAA,EAC9C,EACC,SAAS;AAAA,EACZ,yBAAyBA,IAAE,MAAMA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAAA,EAC/D,yBAAyBA,IAAE,MAAMA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAAA,EAC/D,mBAAmB,yBAAwB,SAAS;AAAA,EACpD,oBAAoB,yBAAwB,SAAS;AAAA,EACrD,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAeC,UAAS,SAAS;AAAA,EACjC,UAAUA,UAAS,SAAS;AAAA,EAC5B,WAAWA,UAAS,SAAS;AAAA,EAC7B,2BAA2BD,IAAE,QAAQ,EAAE,SAAS;AAClD,CAAC;AAKM,IAAM,WAAW;AAGxB,iBAA+C,IAAI;;;ACrEnD,SAAS,YAAAE,iBAAgB;AAczB,SAAS,KAAAC,WAAS;AAaX,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,wBAAwBA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAWA,IACR,OAAOA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC,GAAGA,IAAE,OAAO,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC,CAAC,EACpE,SAAS;AAAA,EACZ,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAeC,UAAS,SAAS;AAAA,EACjC,UAAUA,UAAS,SAAS;AAAA,EAC5B,WAAWA,UAAS,SAAS;AAAA,EAC7B,cAAcD,IAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AAAA,EACjD,oBAAoB,yBAAyB,SAAS;AACxD,CAAC;AAGD,iBAAmD,IAAI;;;ACzCvD,SAAS,YAAAE,iBAAgB;AAKzB,SAAS,KAAAC,WAAS;AAsCX,IAAM,kBAAkBA,IAAE,mBAAmB,SAAS;AAAA,EAC3D,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,QAAQ;AAAA,IACzB,cAAcC;AAAA,IACd,eAAeA;AAAA,IACf,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMD,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,MAAM;AAAA,IACvB,YAAYC;AAAA,IACZ,aAAaA;AAAA,IACb,YAAYA;AAAA,IACZ,aAAaA;AAAA,IACb,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMD,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,MAAM;AAAA,IACvB,YAAYC;AAAA,IACZ,aAAaA;AAAA,IACb,YAAYA;AAAA,IACZ,aAAaA;AAAA,IACb,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AACH,CAAC;AAGD,iBAA2D,IAAI;;;ACxE/D,SAAS,kBAAkB;AAO3B,SAAS,KAAAC,WAAS;AAUX,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AAAA,EAEA,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAUA,IAAE,OAAO,EAAE,SAAS;AAAA,EAE9B,aAAaA,IAAE,OAAO,EAAE,SAAS;AAAA,EACjC,YAAYA,IAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AACM,IAAM,eAAe;AAG5B,iBAAuD,IAAI;;;AC7B3D,SAAS,cAAAC,mBAAkB;AAapB,IAAM,qBAAqB,qBAAqB,OAAO;AAAA,EAC5D,eAAeC;AACjB,CAAC;AACM,IAAM,oBAAoB;AAGjC,iBAAiE,IAAI;;;ACnBrE,SAAS,WAAW,mBAAmB;AAOvC,SAAS,KAAAC,WAAS;AAUX,IAAM,eAAe,qBAAqB,OAAO;AAAA,EACtD;AAAA,EACA,iBAAiB;AAAA,EACjB,YAAYA,IAAE,KAAK,CAAC,QAAQ,MAAM,CAAC,EAAE,SAAS;AAChD,CAAC;AACM,IAAM,cAAc;AAG3B,iBAAqD,IAAI;;;ACzBzD,SAAS,aAAAC,YAAW,eAAAC,oBAAmB;AAMvC,SAAS,KAAAC,WAAS;AAUX,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD,WAAWC;AAAA,EACX,iBAAiBC;AAAA,EACjB,YAAYF,IAAE,KAAK,CAAC,aAAa,cAAc,iBAAiB,CAAC,EAAE,SAAS;AAC9E,CAAC;AAGD,iBAAyD,IAAI;;;ACvB7D,SAAS,eAAAG,oBAAmB;AAO5B,SAAS,KAAAC,WAAS;AAYX,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD,aAAAC;AAAA,EACA,WAAWD,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAC/C,eAAeA,IAAE,OAAO,EAAE,SAAS;AAAA,EACnC,cAAcA,IAAE,OAAO,EAAE,SAAS;AAAA,EAClC,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAUA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC9B,0BAA0BA,IAAE,OAAO,EAAE,SAAS;AAChD,CAAC;AACM,IAAM,gBAAgB;AAE7B,iBAAiE,IAAI;;;AC9BrE,SAAS,KAAAE,WAAS;AAOX,IAAM,WAAWC,IAAE,OAAO;AAAA,EAC/B,MAAMA,IAAE,OAAO;AACjB,CAAC;AAGD,iBAA6C,IAAI;;;ACXjD,SAAS,KAAAC,WAAS;AAQX,IAAM,yBAAyBA,IAAE,OAAO;AAAA,EAC7C,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,SAASA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC9B,SAASA,IAAE,QAAQ,EAAE,SAAS;AAChC,CAAC;AAMD,iBAAyE,IAAI;;;ACnB7E,OAAkB;AAIlB,SAAS,YAAAC,WAAU,UAAAC,eAAc;;;ACDjC,SAAS,KAAAC,WAAS;AAkFX,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOC;AAAA,EACP,MAAMD,IAAE,OAAO;AAAA,EACf,OAAOA,IAAE,OAAO;AAAA,EAEhB,YAAYA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgBA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOC;AAAA,EACP,KAAKD,IAAE,OAAO;AAAA,EACd,QAAQA,IAAE,OAAO;AAAA,EAEjB,YAAYA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgBA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAKA,IAAE,MAAMA,IAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAKA,IAAE,MAAMA,IAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,kBAAkBA,IAAE,MAAM;AAAA,EACrC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAmE,IAAI;;;ACnIvE,SAAS,KAAAE,WAAS;AA6CX,IAAM,kBAAkB,eAC5B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOC,IAAE,QAAQ,MAAM;AAAA,EACvB,OAAOC;AAAA,EACP,QAAQA;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA2D,IAAI;AAExD,IAAM,yBAAyB,eACnC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOD,IAAE,QAAQ,cAAc;AAAA,EAC/B,OAAOC;AAAA,EACP,QAAQA;AAAA,EACR,aAAaD,IAAE,OAAO;AAAA,EACtB,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAAyE,IAAI;AAEtE,IAAM,oBAAoB,eAC9B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOA,IAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQC;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA+D,IAAI;AAE5D,IAAM,kBAAkB,eAC5B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOD,IAAE,QAAQ,MAAM;AAAA,EACvB,OAAOC;AAAA,EACP,QAAQA;AAAA,EACR,QAAQA;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA2D,IAAI;AAExD,IAAM,cAAcD,IAAE,MAAM;AAAA,EACjC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAmD,IAAI;;;ACrGvD,SAA0B,KAAAE,WAAS;AAoB5B,IAAM,uBAAuB,eACjC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOC,IAAE,QAAQ,MAAM;AAAA,EACvB,OAAOC;AAAA,EACP,QAAQA;AACV,CAAC;AAEH,iBAAqE,IAAI;AAElE,IAAM,yBAAyB,eACnC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOD,IAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQC;AACV,CAAC;AAEH,iBAAyE,IAAI;AAEtE,IAAM,mBAAmBD,IAAE,MAAM;AAAA,EACtC;AAAA,EACA;AACF,CAAC;AAGD,iBAA6D,IAAI;;;AC/CjE,SAAS,KAAAE,WAAS;AAWX,IAAM,YAAY,eACtB,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,MAAMC,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAUC,UAAS,SAAS;AAAA,EAC5B,QAAQA,UAAS,SAAS;AAC5B,CAAC,EACA,UAAU,CAAC,OAAO;AAAA,EACjB,GAAG;AAAA,EACH,UAAU,EAAE,YAAY,IAAI,EAAE;AAAA,EAC9B,QAAQ,EAAE,UAAU,EAAE,WAAY;AACpC,EAAE;AAIJ,iBAA+C,IAAI;;;AC1BnD,SAAS,YAAAC,YAAU,oBAAAC,yBAAwB;AAC3C,SAAS,KAAAC,WAAS;AAGX,IAAM,UAAUC,IAAE,MAAM;AAAA,EAC7BA,IAAE,OAAO;AAAA,EACTA,IAAE;AAAA,IAA0C,CAAC,MAC3C,QAAQ,EAAE,eAAe;AAAA,EAC3B;AACF,CAAC;AAED,IAAM,iBAAiBA,IAAE,OAAO;AAAA,EAC9B,KAAKA,IAAE,OAAO,EAAE,SAAS;AAAA,EACzB,WAAWC,WAAS,SAAS;AAAA,EAC7B,qBAAqBD,IAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EAC7C,eAAeA,IAAE,MAAME,iBAAgB,EAAE,SAAS;AAAA,EAClD,iBAAiBF,IAAE,OAAO,EAAE,SAAS;AAAA,EACrC,WAAWC,WAAS,SAAS;AAC/B,CAAC;AAEM,IAAM,aAAaD,IAAE,MAAM;AAAA,EAChC,eAAe,OAAO;AAAA,IACpB,MAAMA,IAAE,MAAM,OAAO;AAAA,EACvB,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,MAAM;AAAA,IACN,IAAI;AAAA,EACN,CAAC;AACH,CAAC;;;AC5BD,SAAwB,aAAAG,kBAAiB;AAEzC,SAAS,KAAAC,WAAS;AAgBX,IAAM,iBAAiBA,IAAE,OAAO;AAAA,EACrC,eAAeC,WAAU,QAAQ,KAAK,EAAE,SAAS;AACnD,CAAC;AAID,iBAAyD,IAAI;;;ACxB7D,SAAS,KAAAC,WAAS;AAUlB,IAAM,WAAWC,IACd,OAAO,EACP,GAAGA,IAAE,OAAO,EAAE,SAAS,KAAK,CAAC,EAC7B,UAAU,CAAC,MAAM;AAChB,MAAI,OAAO,MAAM,UAAU;AACzB,UAAM,YAAY,EAAE,QAAQ,OAAO,EAAE;AACrC,UAAM,MAAM,OAAO,WAAW,SAAS;AACvC,QAAI,OAAO,MAAM,GAAG,GAAG;AACrB,YAAM,IAAI,MAAM,kBAAkB;AAAA,IACpC;AACA,WAAO;AAAA,EACT;AACA,SAAO;AACT,CAAC,EACA,SAAS,yBAAyB;AAM9B,IAAM,eAAe,qBAAqB,OAAO;AAAA,EACtD,UAAU,SAAS,SAAS;AAC9B,CAAC;AACM,IAAM,cAAc;AAE3B,iBAA6D,IAAI;;;ACnCjE,SAAS,YAAAC,kBAAgB;AAMzB,SAAS,KAAAC,WAAS;AAsDX,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD,UAAUA,IAAE,OAAO;AAAA,EACnB,OAAOC,WAAS,SAAS;AAAA,EACzB,oBAAoBD,IAAE,KAAK,CAAC,MAAM,QAAQ,QAAQ,OAAO,CAAC,EAAE,SAAS;AAAA,EACrE,QAAQA,IAAE,KAAK,CAAC,QAAQ,QAAQ,CAAC,EAAE,SAAS,EAAE,QAAQ,MAAM;AAAA,EAC5D,yBAAyBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC9C,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,cAAcC,WAAS,SAAS;AAAA,EAChC,gBAAgBA,WAAS,SAAS;AAAA,EAClC,WAAWD,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACxC,iBAAiBA,IAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AACtD,CAAC;AAGD,iBAAyD,IAAI;;;AC1E7D,SAAS,KAAAE,WAAS;AAGlB,SAAS,YAAAC,iBAAgB;AAUlB,IAAM,gBAAgBC,IAAE,OAAO;AAAA,EACpC,KAAKA,IAAE,OAAO,EAAE,SAAS;AAAA,EACzB,MAAMC,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAaF,UAAS,SAAS;AAAA,EAC/B,YAAYC,IAAE,KAAK,CAAC,QAAQ,MAAM,SAAS,MAAM,CAAC,EAAE,SAAS;AAC/D,CAAC;AAGD,iBAAuD,IAAI;;;ACjB3D,SAAS,KAAAE,WAAS;AAMX,IAAM,kBAAkB,qBAAqB,OAAO;AAAA,EACzD,yBAAyBA,IAAE,MAAMA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AACjE,CAAC;AAGD,iBAA2D,IAAI;;;ACTxD,IAAM,kBAAkB;AAG/B,iBAA2D,IAAI;;;ACL/D,SAAS,KAAAC,WAAS;AAMX,IAAM,kBAAkB,qBAAqB,OAAO;AAAA,EACzD,MAAMA,IAAE,KAAK,CAAC,OAAO,OAAO,OAAO,QAAQ,QAAQ,CAAC;AACtD,CAAC;AAEM,IAAM,iBAAiB;AAAA,EAC5B;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAGA,iBAA2D,IAAI;;;ACpB/D,SAAS,KAAAC,WAAS;AAOX,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,aAAaA,IAAE,KAAK,CAAC,KAAK,GAAG,CAAC;AAAA,EAC9B,YAAYA,IAAE,KAAK,CAAC,eAAe,WAAW,CAAC;AACjD,CAAC;AAEM,IAAM,aAAa;AAAA,EACxB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAGA,iBAAmD,IAAI;;;AC3BvD,SAAS,kBAAkB;AAIpB,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AACF,CAAC;AACM,IAAM,eAAe;;;ACJrB,IAAM,aAAa,qBAAqB,OAAO,CAAC,CAAC;AACjD,IAAM,YAAY;;;ACHzB,SAAS,KAAAC,WAAS;AAEX,IAAM,WAAW,qBAAqB,OAAO;AAAA,EAClD,OAAOA,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AACM,IAAM,UAAU;;;ACAvB,SAAS,KAAAC,WAAS;AAYX,IAAM,cAAc,qBACxB,OAAO;AAAA,EACN,OAAOA,IAAE,QAAQ,QAAQ;AAAA,EACzB,MAAMA,IAAE,KAAK,CAAC,QAAQ,QAAQ,QAAQ,MAAM,CAAC,EAAE,SAAS;AAAA,EACxD,kBAAkBA,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AACxD,CAAC,EACA,UAAU,CAAC,UAAU;AAEpB,QAAM,eAA4B,EAAE,GAAG,MAAM;AAC7C,UAAQ,aAAa,MAAM;AAAA,IACzB,KAAK;AACH,mBAAa,OAAO;AACpB;AAAA,IACF,KAAK;AACH,mBAAa,OAAO;AACpB;AAAA,IACF,KAAK;AACH,mBAAa,OAAO;AACpB;AAAA,IACF,KAAK;AACH,mBAAa,OAAO;AACpB;AAAA,EACJ;AAEA,SAAO;AACT,CAAC;AAGH,iBAAmD,IAAI;;;AC9CvD,SAAS,UAAAC,eAAc;AAEvB,SAAS,KAAAC,WAAS;AAEX,IAAM,2BAA2B,eAAe,OAAO;AAAA,EAC5D,MAAMA,IAAE,OAAO;AAAA,EACf,iBAAiBA,IACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAMA,IAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAUC,QAAO,SAAS;AAAA,EAC1B,OAAOD,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;;;ACZD,SAAS,UAAAE,SAAQ,oBAAAC,yBAAwB;AAEzC,SAAS,KAAAC,WAAS;AAEX,IAAM,2BAA2B,eACrC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAOA,IAAE,MAAMC,iBAAgB;AAAA,EAC/B,aAAaC,QAAO,SAAS;AAAA,EAC7B,OAAOF,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;;;ACVH,SAAS,YAAAG,YAAU,oBAAAC,yBAAwB;AAC3C,SAAS,KAAAC,WAAS;AAEX,IAAM,gBAAgBA,IAAE,OAAO;AAAA,EACpC,OAAOA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,WAAWF,WAAS,SAAS;AAAA,EAC7B,OAAOE,IAAE,MAAMD,iBAAgB;AACjC,CAAC;;;ACPD,SAAS,YAAAE,YAAU,aAAAC,kBAAiB;AAI7B,IAAM,WAAW,kBAAkB,OAAO;AAAA,EAC/C,WAAWC;AAAA,EACX,SAASA;AAAA,EACT,cAAcC;AAAA,EACd,eAAeA;AACjB,CAAC;;;ACTD,SAAS,YAAAC,kBAAgB;AAEzB,SAAS,KAAAC,WAAS;AAEX,IAAM,kBAAkBA,IAAE,MAAM;AAAA,EACrC,eAAe,KAAK,EAAE,aAAa,KAAK,CAAC,EAAE,OAAO;AAAA,IAChD,OAAOA,IAAE,QAAQ,QAAQ;AAAA,IACzB,QAAQC;AAAA,EACV,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,OAAOD,IAAE,QAAQ,MAAM;AAAA,IACvB,OAAOC;AAAA,IACP,QAAQA;AAAA,EACV,CAAC;AACH,CAAC;;;ACdD,SAAS,eAAe;AAIjB,IAAM,mBAAmB,qBAAqB,OAAO;AAAA,EAC1D;AACF,CAAC;;;ACND,SAAS,YAAAC,kBAAgB;AACzB,SAAS,KAAAC,WAAS;AAEX,IAAM,oBAAoBA,IAAE,OAAO;AAAA,EACxC,MAAMD;AAAA,EACN,MAAMA;AAAA,EACN,OAAOA;AAAA,EACP,QAAQA;AACV,CAAC;;;ACRD,SAAS,YAAAE,kBAAgB;AACzB,SAAS,KAAAC,WAAS;AAEX,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EACzC,IAAID;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AACN,CAAC;;;ACRD,SAAS,YAAAE,kBAAgB;AACzB,SAAS,KAAAC,WAAS;AAEX,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EACzC,MAAMD;AAAA,EACN,MAAMA;AAAA,EACN,MAAMC,IAAE,OAAO;AACjB,CAAC;;;ACPD,SAAS,SAAAC,cAAa;AACtB,SAAS,KAAAC,WAAS;AAEX,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EACzC,QAAQA,IAAE,MAAMD,MAAK;AAAA,EACrB,UAAUC,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAC9C,WAAWA,IAAE,KAAK,CAAC,OAAO,MAAM,CAAC,EAAE,SAAS;AAC9C,CAAC;;;ACPD,SAAS,UAAAC,eAAc;AAEvB,SAAS,KAAAC,WAAS;AAEX,IAAM,sBAAsB,eAAe,OAAO;AAAA,EACvD,MAAMA,IAAE,OAAO;AAAA,EACf,iBAAiBA,IACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAMA,IAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAUC,QAAO,SAAS;AAC5B,CAAC;;;ACXD,SAAS,UAAAC,SAAQ,oBAAAC,yBAAwB;AAEzC,SAAS,KAAAC,WAAS;AAEX,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAOA,IAAE,MAAMC,iBAAgB;AAAA,EAC/B,aAAaC,QAAO,SAAS;AAC/B,CAAC;;;ACTH,SAAS,YAAAC,kBAAgB;AAIlB,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,aAAaC;AAAA,EACb,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AACN,CAAC;;;ACZH,SAAS,YAAAC,kBAAgB;AAEzB,SAAS,KAAAC,WAAS;AAEX,IAAM,sBAAsB,eAChC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAUA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAaC,WAAS,SAAS;AAAA,EAC/B,OAAOA;AAAA,EACP,QAAQA;AACV,CAAC;;;ACZH,SAAS,YAAAC,kBAAgB;AAEzB,SAAS,KAAAC,WAAS;AAEX,IAAM,wBAAwB,eAClC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAUA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAaC,WAAS,SAAS;AAAA,EAC/B,QAAQA;AACV,CAAC;;;ACXH,SAAS,YAAAC,YAAU,aAAAC,YAAW,oBAAAC,yBAAwB;AACtD,SAAS,KAAAC,WAAS;AAEX,IAAM,sBAAsBA,IAAE,OAAO;AAAA,EAC1C,GAAGH;AAAA,EACH,GAAGA;AAAA,EACH,KAAKG,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC1B,SAASF,WAAU,SAAS;AAC9B,CAAC;AAEM,IAAM,iBAAiBE,IAAE,OAAO;AAAA,EACrC,KAAKA,IACF,OAAO,EACP,SAAS,EACT;AAAA,IACC;AAAA,EACF;AAAA,EACF,OAAOA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,QAAQD,kBAAiB,GAAG,mBAAmB,EAAE,SAAS;AAAA,EAC1D,SAASC,IACN,MAAMD,iBAAgB,EACtB,GAAGC,IAAE,MAAM,mBAAmB,CAAC,EAC/B,SAAS;AAAA,EACZ,YAAYA,IAAE,OAAO,EAAE,SAAS;AAClC,CAAC;;;ACtBD,SAAS,KAAAC,WAAS;AAEX,IAAM,YAAY,kBAAkB,OAAO;AAAA,EAChD,MAAMA,IAAE,OAAO;AAAA,EACf,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,SAASA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACtC;AACF,CAAC;","names":["z","z","distance","z","z","z","z","z","z","distance","z","distance","z","distance","distance","distance","z","z","z","z","z","z","z","z","z","z","z","z","z","z","point","z","point","z","route_hint_point","z","route_hint_point","z","point","z","point","z","z","distance","z","distance","z","distance","distance","z","distance","distance","z","distance","z","resistance","resistance","z","frequency","capacitance","z","frequency","capacitance","capacitance","z","capacitance","z","z","z","distance","length","z","distance","z","z","distance","z","z","distance","z","z","distance","distance","route_hint_point","z","z","distance","route_hint_point","layer_ref","z","layer_ref","z","z","distance","z","distance","z","rotation","z","distance","z","z","z","z","z","length","z","length","length","route_hint_point","z","route_hint_point","length","distance","route_hint_point","z","distance","layer_ref","layer_ref","distance","distance","z","distance","distance","z","distance","z","distance","z","point","z","length","z","length","length","route_hint_point","z","route_hint_point","length","distance","distance","distance","z","distance","distance","z","distance","distance","layer_ref","route_hint_point","z","z"]}
+{"version":3,"sources":["../lib/typecheck.ts","../lib/common/direction.ts","../lib/common/portHints.ts","../lib/common/layout.ts","../lib/common/cadModel.ts","../lib/common/point3.ts","../lib/common/footprintProp.ts","../lib/common/schematicPinDefinitions.ts","../lib/common/schematicPinStyle.ts","../lib/components/board.ts","../lib/common/point.ts","../lib/components/group.ts","../lib/manual-edits/manual-edit-events/base_manual_edit_event.ts","../lib/manual-edits/manual-edit-events/edit_pcb_component_location_event.ts","../lib/manual-edits/manual-edit-events/edit_trace_hint_event.ts","../lib/manual-edits/manual-edit-events/edit_schematic_component_location_event.ts","../lib/manual-edits/manual_edit_event.ts","../lib/manual-edits/manual_edits_file.ts","../lib/manual-edits/manual_pcb_placement.ts","../lib/manual-edits/manual_trace_hint.ts","../lib/manual-edits/manual_schematic_placement.ts","../lib/components/chip.ts","../lib/components/jumper.ts","../lib/components/platedhole.ts","../lib/components/resistor.ts","../lib/components/potentiometer.ts","../lib/components/crystal.ts","../lib/components/resonator.ts","../lib/components/capacitor.ts","../lib/components/net.ts","../lib/components/constrainedlayout.ts","../lib/common/distance.ts","../lib/components/constraint.ts","../lib/components/smtpad.ts","../lib/components/solderpaste.ts","../lib/components/hole.ts","../lib/components/trace.ts","../lib/components/footprint.ts","../lib/components/battery.ts","../lib/components/pin-header.ts","../lib/components/netalias.ts","../lib/components/push-button.ts","../lib/components/subcircuit.ts","../lib/components/transistor.ts","../lib/components/mosfet.ts","../lib/components/inductor.ts","../lib/components/diode.ts","../lib/components/led.ts","../lib/components/switch.ts","../lib/components/fabrication-note-text.ts","../lib/components/fabrication-note-path.ts","../lib/components/pcb-trace.ts","../lib/components/via.ts","../lib/components/pcb-keepout.ts","../lib/components/power-source.ts","../lib/components/schematic-box.ts","../lib/components/schematic-line.ts","../lib/components/schematic-text.ts","../lib/components/schematic-path.ts","../lib/components/silkscreen-text.ts","../lib/components/silkscreen-path.ts","../lib/components/silkscreen-line.ts","../lib/components/silkscreen-rect.ts","../lib/components/silkscreen-circle.ts","../lib/components/trace-hint.ts","../lib/components/port.ts"],"sourcesContent":["import type { TypeEqual } from \"ts-expect\"\n\ntype IsNever<T> = [T] extends [never] ? true : false\n\ntype GetMismatchedProps<T1, T2> = {\n  [K in keyof T1 & keyof T2]: T1[K] extends T2[K]\n    ? T2[K] extends T1[K]\n      ? never\n      : K\n    : K\n}[keyof T1 & keyof T2]\n\nexport const expectTypesMatch = <\n  const T1,\n  const T2,\n  T3 = Exclude<keyof T1, keyof T2>,\n  T4 = Exclude<keyof T2, keyof T1>,\n  T5 = GetMismatchedProps<T1, T2>,\n>(\n  shouldBe: IsNever<T3> extends true\n    ? IsNever<T4> extends true\n      ? IsNever<T5> extends true\n        ? TypeEqual<T1, T2>\n        : `property ${T5 extends string ? T5 : \"\"} has mismatched types`\n      : `extra props ${T4 extends string ? T4 : \"\"}`\n    : `missing props ${T3 extends string ? T3 : \"\"}`,\n): void => {}\n\n// ------ TESTS -------\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: number\n    b: number\n  }\n>(\"extra props b\")\n\nexpectTypesMatch<\n  {\n    a: number\n    b: number\n  },\n  {\n    a: number\n  }\n>(\"missing props b\")\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: number\n  }\n>(true)\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: string\n  }\n>(\"property a has mismatched types\")\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nexport const direction = z.enum([\"up\", \"down\", \"left\", \"right\"])\nexport type Direction = \"up\" | \"down\" | \"left\" | \"right\"\n\nexport type DirectionAlongEdge =\n  | \"top-to-bottom\"\n  | \"left-to-right\"\n  | \"bottom-to-top\"\n  | \"right-to-left\"\n\nexport const directionAlongEdge = z.enum([\n  \"top-to-bottom\",\n  \"left-to-right\",\n  \"bottom-to-top\",\n  \"right-to-left\",\n])\n\nexpectTypesMatch<Direction, z.infer<typeof direction>>(true)\nexpectTypesMatch<DirectionAlongEdge, z.infer<typeof directionAlongEdge>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const portHints = z.array(z.string().or(z.number()))\nexport type PortHints = (string | number)[]\n\nexpectTypesMatch<PortHints, z.infer<typeof portHints>>(true)\n","import {\n  type LayerRefInput,\n  distance,\n  layer_ref,\n  rotation,\n  supplier_name,\n} from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport { type CadModelProp, cadModelProp } from \"./cadModel\"\nimport { type Footprint, footprintProp } from \"./footprintProp\"\n\nexport interface PcbLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n  layer?: LayerRefInput\n}\n\nexport interface CommonLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n\n  schX?: string | number\n  schY?: string | number\n  schRotation?: string | number\n\n  layer?: LayerRefInput\n  footprint?: Footprint\n}\n\nexport const pcbLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n})\ntype InferredPcbLayoutProps = z.input<typeof pcbLayoutProps>\nexpectTypesMatch<PcbLayoutProps, InferredPcbLayoutProps>(true)\n\nexport const commonLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n  footprint: footprintProp.optional(),\n})\n\ntype InferredCommonLayoutProps = z.input<typeof commonLayoutProps>\nexpectTypesMatch<CommonLayoutProps, InferredCommonLayoutProps>(true)\n\nexport type SupplierName =\n  | \"jlcpcb\"\n  | \"macrofab\"\n  | \"pcbway\"\n  | \"digikey\"\n  | \"mouser\"\n  | \"lcsc\"\nexport type SupplierPartNumbers = { [k in SupplierName]?: string[] }\nexport interface SupplierProps {\n  supplierPartNumbers?: SupplierPartNumbers\n}\nexport const supplierProps = z.object({\n  supplierPartNumbers: z.record(supplier_name, z.array(z.string())).optional(),\n})\n\nexpectTypesMatch<SupplierProps, z.input<typeof supplierProps>>(true)\n\nexport interface CommonComponentProps extends CommonLayoutProps {\n  key?: any\n  name: string\n  supplierPartNumbers?: SupplierPartNumbers\n  cadModel?: CadModelProp\n  children?: any\n  symbolName?: string\n}\n\nexport const commonComponentProps = commonLayoutProps\n  .merge(supplierProps)\n  .extend({\n    key: z.any().optional(),\n    name: z.string(),\n    cadModel: cadModelProp.optional(),\n    children: z.any().optional(),\n    symbolName: z.string().optional(),\n  })\n\ntype InferredCommonComponentProps = z.input<typeof commonComponentProps>\nexpectTypesMatch<CommonComponentProps, InferredCommonComponentProps>(true)\n\nexport const componentProps = commonComponentProps\nexport type ComponentProps = z.input<typeof componentProps>\n\nexport const lrPins = [\"pin1\", \"left\", \"pin2\", \"right\"] as const\nexport const lrPolarPins = [\n  \"pin1\",\n  \"left\",\n  \"anode\",\n  \"pos\",\n  \"pin2\",\n  \"right\",\n  \"cathode\",\n  \"neg\",\n] as const\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n","import { z } from \"zod\"\nimport { point3 } from \"./point3\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const rotationPoint3 = z.object({\n  x: z.union([z.number(), z.string()]),\n  y: z.union([z.number(), z.string()]),\n  z: z.union([z.number(), z.string()]),\n})\n\nexport interface CadModelBase {\n  rotationOffset?:\n    | number\n    | { x: number | string; y: number | string; z: number | string }\n  positionOffset?: {\n    x: number | string\n    y: number | string\n    z: number | string\n  }\n  size?: { x: number | string; y: number | string; z: number | string }\n}\n\nexport const cadModelBase = z.object({\n  rotationOffset: z.number().or(rotationPoint3).optional(),\n  positionOffset: point3.optional(),\n  size: point3.optional(),\n})\n\nexpectTypesMatch<CadModelBase, z.input<typeof cadModelBase>>(true)\n\nexport interface CadModelStl extends CadModelBase {\n  stlUrl: string\n}\nexport const cadModelStl = cadModelBase.extend({\n  stlUrl: z.string(),\n})\n\nexport interface CadModelObj extends CadModelBase {\n  objUrl: string\n  mtlUrl?: string\n}\nexport const cadModelObj = cadModelBase.extend({\n  objUrl: z.string(),\n  mtlUrl: z.string().optional(),\n})\n\nexport interface CadModelJscad extends CadModelBase {\n  jscad: Record<string, any>\n}\nexport const cadModelJscad = cadModelBase.extend({\n  jscad: z.record(z.any()),\n})\n\nexport type CadModelProp = string | CadModelStl | CadModelObj | CadModelJscad\n\nexport const cadModelProp = z.union([\n  z.string(),\n  cadModelStl,\n  cadModelObj,\n  cadModelJscad,\n])\n\ntype InferredCadModelProp = z.input<typeof cadModelProp>\nexpectTypesMatch<CadModelProp, InferredCadModelProp>(true)\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const point3 = z.object({\n  x: distance,\n  y: distance,\n  z: distance,\n})\n","import type { LayerRef } from \"circuit-json\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\n\n/**\n * This is an abbreviated definition of the soup elements that you can find here:\n * https://docs.tscircuit.com/api-reference/advanced/soup#pcb-smtpad\n */\nexport type FootprintSoupElements = {\n  type: \"pcb_smtpad\" | \"pcb_plated_hole\"\n  x: string | number\n  y: string | number\n  layer?: LayerRef\n  holeDiameter?: string | number\n  outerDiameter?: string | number\n  shape?: \"circle\" | \"rect\"\n  width?: string | number\n  height?: string | number\n  portHints?: string[]\n}\n\nexport type Footprint = string | ReactElement | FootprintSoupElements[]\nexport const footprintProp = z.custom<Footprint>((v) => true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\n/**\n * @deprecated Use SchematicPortArrangementWithPinCounts instead.\n */\nexport interface SchematicPortArrangementWithSizes {\n  leftSize?: number\n  topSize?: number\n  rightSize?: number\n  bottomSize?: number\n}\n\n/**\n * Specifies the number of pins on each side of the schematic box component.\n */\nexport interface SchematicPortArrangementWithPinCounts {\n  leftPinCount?: number\n  topPinCount?: number\n  rightPinCount?: number\n  bottomPinCount?: number\n}\n\nexport interface PinSideDefinition {\n  pins: Array<number | string>\n  direction:\n    | \"top-to-bottom\"\n    | \"left-to-right\"\n    | \"bottom-to-top\"\n    | \"right-to-left\"\n}\n\nexport interface SchematicPortArrangementWithSides {\n  leftSide?: PinSideDefinition\n  topSide?: PinSideDefinition\n  rightSide?: PinSideDefinition\n  bottomSide?: PinSideDefinition\n}\n\nexport interface SchematicPortArrangement\n  extends SchematicPortArrangementWithSizes,\n    SchematicPortArrangementWithSides,\n    SchematicPortArrangementWithPinCounts {}\n\nexport type SchematicPinArrangement = SchematicPortArrangement\nexport type SchematicPinArrangementWithSizes = SchematicPortArrangementWithSizes\nexport type SchematicPinArrangementWithSides = SchematicPortArrangementWithSides\nexport type SchematicPinArrangementWithPinCounts =\n  SchematicPortArrangementWithPinCounts\n\nexport const explicitPinSideDefinition = z.object({\n  pins: z.array(z.union([z.number(), z.string()])),\n  direction: z.union([\n    z.literal(\"top-to-bottom\"),\n    z.literal(\"left-to-right\"),\n    z.literal(\"bottom-to-top\"),\n    z.literal(\"right-to-left\"),\n  ]),\n})\n\n/**\n * @deprecated Use schematicPinArrangement instead.\n */\nexport const schematicPortArrangement = z.object({\n  leftSize: z.number().optional().describe(\"@deprecated, use leftPinCount\"),\n  topSize: z.number().optional().describe(\"@deprecated, use topPinCount\"),\n  rightSize: z.number().optional().describe(\"@deprecated, use rightPinCount\"),\n  bottomSize: z.number().optional().describe(\"@deprecated, use bottomPinCount\"),\n  leftPinCount: z.number().optional(),\n  rightPinCount: z.number().optional(),\n  topPinCount: z.number().optional(),\n  bottomPinCount: z.number().optional(),\n  leftSide: explicitPinSideDefinition.optional(),\n  rightSide: explicitPinSideDefinition.optional(),\n  topSide: explicitPinSideDefinition.optional(),\n  bottomSide: explicitPinSideDefinition.optional(),\n})\n\nexport const schematicPinArrangement = schematicPortArrangement\n\nexpectTypesMatch<\n  SchematicPortArrangement,\n  z.input<typeof schematicPortArrangement>\n>(true)\n","import { distance } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type SchematicPinStyle = Record<\n  string,\n  {\n    marginTop?: number | string\n    marginRight?: number | string\n    marginBottom?: number | string\n    marginLeft?: number | string\n\n    /** @deprecated use marginLeft */\n    leftMargin?: number | string\n    /** @deprecated use marginRight */\n    rightMargin?: number | string\n    /** @deprecated use marginTop */\n    topMargin?: number | string\n    /** @deprecated use marginBottom */\n    bottomMargin?: number | string\n  }\n>\n\nexport const schematicPinStyle = z.record(\n  z.object({\n    marginLeft: distance.optional(),\n    marginRight: distance.optional(),\n    marginTop: distance.optional(),\n    marginBottom: distance.optional(),\n\n    leftMargin: distance.optional(),\n    rightMargin: distance.optional(),\n    topMargin: distance.optional(),\n    bottomMargin: distance.optional(),\n  }),\n)\n\nexpectTypesMatch<SchematicPinStyle, z.input<typeof schematicPinStyle>>(true)\n","import type { LayoutBuilder, ManualEditFile } from \"@tscircuit/layout\"\nimport { distance } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport { type Point, point } from \"lib/common/point\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport { subcircuitGroupProps, type SubcircuitGroupProps } from \"./group\"\n\nexport interface BoardProps extends Omit<SubcircuitGroupProps, \"subcircuit\"> {\n  width?: number | string\n  height?: number | string\n  outline?: Point[]\n  outlineOffsetX?: number | string\n  outlineOffsetY?: number | string\n}\n\nexport const boardProps = subcircuitGroupProps.extend({\n  width: distance.optional(),\n  height: distance.optional(),\n  outline: z.array(point).optional(),\n  outlineOffsetX: distance.optional(),\n  outlineOffsetY: distance.optional(),\n})\n\ntype InferredBoardProps = z.input<typeof boardProps>\nexpectTypesMatch<BoardProps, InferredBoardProps>(true)\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const point = z.object({\n  x: distance,\n  y: distance,\n})\n\nexport type Point = { x: number | string; y: number | string }\n","import type { LayoutBuilder } from \"@tscircuit/layout\"\nimport { length } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport {\n  type CommonLayoutProps,\n  commonLayoutProps,\n  type SupplierPartNumbers,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport type { AnySourceComponent, PcbTrace } from \"circuit-json\"\nimport {\n  manual_edits_file,\n  type ManualEditsFile,\n  type ManualEditsFileInput,\n} from \"lib/manual-edits\"\n\nexport interface BaseGroupProps extends CommonLayoutProps {\n  name?: string\n  key?: any\n  children?: any\n}\n\nexport type PartsEngine = {\n  findPart: (params: {\n    sourceComponent: AnySourceComponent\n    footprinterString?: string\n  }) => Promise<SupplierPartNumbers> | SupplierPartNumbers\n}\n\nexport interface PcbRouteCache {\n  pcbTraces: PcbTrace[]\n  cacheKey: string\n}\n\nexport interface AutorouterConfig {\n  serverUrl?: string\n  inputFormat?: \"simplified\" | \"circuit-json\"\n  serverMode?: \"job\" | \"solve-endpoint\"\n  serverCacheEnabled?: boolean\n  cache?: PcbRouteCache\n  groupMode?: \"sequential-trace\" | \"subcircuit\"\n  local?: boolean\n}\n\nexport type AutorouterProp =\n  | AutorouterConfig\n  | \"sequential-trace\"\n  | \"subcircuit\"\n  | \"auto\"\n  | \"auto-local\"\n  | \"auto-cloud\"\n\nexport const autorouterConfig = z.object({\n  serverUrl: z.string().optional(),\n  inputFormat: z.enum([\"simplified\", \"circuit-json\"]).optional(),\n  serverMode: z.enum([\"job\", \"solve-endpoint\"]).optional(),\n  serverCacheEnabled: z.boolean().optional(),\n  cache: z.custom<PcbRouteCache>((v) => true).optional(),\n  groupMode: z.enum([\"sequential-trace\", \"subcircuit\"]).optional(),\n  local: z.boolean().optional(),\n})\n\nexport const autorouterProp = z.union([\n  autorouterConfig,\n  z.literal(\"sequential-trace\"),\n  z.literal(\"subcircuit\"),\n  z.literal(\"auto\"),\n  z.literal(\"auto-local\"),\n  z.literal(\"auto-cloud\"),\n])\n\nexport interface SubcircuitGroupProps extends BaseGroupProps {\n  layout?: LayoutBuilder\n  manualEdits?: ManualEditsFileInput\n  routingDisabled?: boolean\n  defaultTraceWidth?: Distance\n  minTraceWidth?: Distance\n  pcbRouteCache?: PcbRouteCache\n\n  autorouter?: AutorouterProp\n\n  /**\n   * If true, we'll automatically layout the schematic for this group. Must be\n   * a subcircuit (currently). This is eventually going to be replaced with more\n   * sophisticated layout options/modes and will be enabled by default.\n   */\n  schAutoLayoutEnabled?: boolean\n\n  /**\n   * If true, net labels will automatically be created for complex traces\n   */\n  schTraceAutoLabelEnabled?: boolean\n\n  partsEngine?: PartsEngine\n}\n\nexport interface SubcircuitGroupPropsWithBool extends SubcircuitGroupProps {\n  subcircuit: true\n}\n\nexport interface NonSubcircuitGroupProps extends BaseGroupProps {\n  subcircuit?: false | undefined\n}\n\nexport type GroupProps = SubcircuitGroupPropsWithBool | NonSubcircuitGroupProps\n\nexport const baseGroupProps = commonLayoutProps.extend({\n  name: z.string().optional(),\n  children: z.any().optional(),\n  key: z.any().optional(),\n})\n\nexport const subcircuitGroupProps = baseGroupProps.extend({\n  layout: z.custom<LayoutBuilder>((v) => true).optional(),\n  manualEdits: manual_edits_file.optional(),\n  schAutoLayoutEnabled: z.boolean().optional(),\n  schTraceAutoLabelEnabled: z.boolean().optional(),\n  routingDisabled: z.boolean().optional(),\n  defaultTraceWidth: length.optional(),\n  minTraceWidth: length.optional(),\n  partsEngine: z.custom<PartsEngine>((v) => \"findPart\" in v).optional(),\n  pcbRouteCache: z.custom<PcbRouteCache>((v) => true).optional(),\n  autorouter: autorouterProp.optional(),\n})\n\nexport const subcircuitGroupPropsWithBool = subcircuitGroupProps.extend({\n  subcircuit: z.literal(true),\n})\n\nexport const groupProps = z.discriminatedUnion(\"subcircuit\", [\n  baseGroupProps.extend({ subcircuit: z.literal(false).optional() }),\n  subcircuitGroupPropsWithBool,\n])\n\ntype InferredBaseGroupProps = z.input<typeof baseGroupProps>\ntype InferredSubcircuitGroupPropsWithBool = z.input<\n  typeof subcircuitGroupPropsWithBool\n>\n\nexpectTypesMatch<BaseGroupProps, InferredBaseGroupProps>(true)\nexpectTypesMatch<\n  SubcircuitGroupPropsWithBool,\n  InferredSubcircuitGroupPropsWithBool\n>(true)\n\ntype InferredGroupProps = z.input<typeof groupProps>\nexpectTypesMatch<GroupProps, InferredGroupProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport const base_manual_edit_event = z.object({\n  edit_event_id: z.string(),\n  in_progress: z.boolean().optional(),\n  created_at: z.number(),\n})\n\nexport interface BaseManualEditEvent {\n  edit_event_id: string\n  in_progress?: boolean\n  created_at: number\n}\n\nexport type BaseManualEditEventInput = z.input<typeof base_manual_edit_event>\n\nexpectTypesMatch<BaseManualEditEvent, z.infer<typeof base_manual_edit_event>>(\n  true,\n)\n","import { z } from \"zod\"\nimport {\n  base_manual_edit_event,\n  type BaseManualEditEvent,\n} from \"./base_manual_edit_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const edit_pcb_component_location_event = base_manual_edit_event.extend({\n  pcb_edit_event_type: z\n    .literal(\"edit_component_location\")\n    .describe(\"deprecated\"),\n  edit_event_type: z.literal(\"edit_pcb_component_location\"),\n  pcb_component_id: z.string(),\n  original_center: z.object({ x: z.number(), y: z.number() }),\n  new_center: z.object({ x: z.number(), y: z.number() }),\n})\n\n/** @deprecated use edit_pcb_component_location_event instead */\nexport const edit_component_location_event = edit_pcb_component_location_event\n\nexport interface EditPcbComponentLocationEvent extends BaseManualEditEvent {\n  edit_event_type: \"edit_pcb_component_location\"\n  /** @deprecated */\n  pcb_edit_event_type: \"edit_component_location\"\n  pcb_component_id: string\n  original_center: { x: number; y: number }\n  new_center: { x: number; y: number }\n}\n\nexport type EditPcbComponentLocationEventInput = z.input<\n  typeof edit_pcb_component_location_event\n>\n\nexpectTypesMatch<\n  EditPcbComponentLocationEvent,\n  z.infer<typeof edit_pcb_component_location_event>\n>(true)\n","import { z } from \"zod\"\nimport {\n  base_manual_edit_event,\n  type BaseManualEditEvent,\n} from \"./base_manual_edit_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { route_hint_point } from \"circuit-json\"\n\nexport const edit_trace_hint_event = base_manual_edit_event.extend({\n  pcb_edit_event_type: z.literal(\"edit_trace_hint\").describe(\"deprecated\"),\n  edit_event_type: z.literal(\"edit_pcb_trace_hint\").optional(),\n  pcb_port_id: z.string(),\n  pcb_trace_hint_id: z.string().optional(),\n  route: z.array(\n    z.object({ x: z.number(), y: z.number(), via: z.boolean().optional() }),\n  ),\n})\n\nexport interface EditTraceHintEvent extends BaseManualEditEvent {\n  /** @deprecated */\n  pcb_edit_event_type: \"edit_trace_hint\"\n  edit_event_type?: \"edit_pcb_trace_hint\"\n  pcb_port_id: string\n  pcb_trace_hint_id?: string\n  route: Array<{ x: number; y: number; via?: boolean }>\n}\n\nexport type EditTraceHintEventInput = z.input<typeof edit_trace_hint_event>\n\nexpectTypesMatch<EditTraceHintEvent, z.infer<typeof edit_trace_hint_event>>(\n  true,\n)\n","import { z } from \"zod\"\nimport {\n  base_manual_edit_event,\n  type BaseManualEditEvent,\n} from \"./base_manual_edit_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const edit_schematic_component_location_event =\n  base_manual_edit_event.extend({\n    edit_event_type: z.literal(\"edit_schematic_component_location\"),\n    schematic_component_id: z.string(),\n    original_center: z.object({ x: z.number(), y: z.number() }),\n    new_center: z.object({ x: z.number(), y: z.number() }),\n  })\n\nexport interface EditSchematicComponentLocationEvent\n  extends BaseManualEditEvent {\n  edit_event_type: \"edit_schematic_component_location\"\n  schematic_component_id: string\n  original_center: { x: number; y: number }\n  new_center: { x: number; y: number }\n}\n\nexport type EditSchematicComponentLocationEventInput = z.input<\n  typeof edit_schematic_component_location_event\n>\n\nexpectTypesMatch<\n  EditSchematicComponentLocationEvent,\n  z.infer<typeof edit_schematic_component_location_event>\n>(true)\n","import { z } from \"zod\"\nimport {\n  edit_pcb_component_location_event,\n  type EditPcbComponentLocationEvent,\n} from \"./manual-edit-events/edit_pcb_component_location_event\"\nimport {\n  edit_schematic_component_location_event,\n  type EditSchematicComponentLocationEvent,\n} from \"./manual-edit-events/edit_schematic_component_location_event\"\nimport {\n  edit_trace_hint_event,\n  type EditTraceHintEvent,\n} from \"./manual-edit-events/edit_trace_hint_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type ManualEditEvent =\n  | EditPcbComponentLocationEvent\n  | EditTraceHintEvent\n  | EditSchematicComponentLocationEvent\n\nexport const manual_edit_event = z.union([\n  edit_pcb_component_location_event,\n  edit_trace_hint_event,\n  edit_schematic_component_location_event,\n])\n\nexport type ManualEditEventInput = z.input<typeof manual_edit_event>\ntype InferredManualEditEvent = z.infer<typeof manual_edit_event>\n\nexpectTypesMatch<ManualEditEvent, InferredManualEditEvent>(true)\n","import { z } from \"zod\"\nimport {\n  manual_pcb_placement,\n  type ManualPcbPlacement,\n} from \"./manual_pcb_placement\"\nimport { manual_edit_event } from \"./manual_edit_event\"\nimport { manual_trace_hint, type ManualTraceHint } from \"./manual_trace_hint\"\nimport {\n  manual_schematic_placement,\n  type ManualSchematicPlacement,\n} from \"./manual_schematic_placement\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_edits_file = z.object({\n  pcb_placements: z.array(manual_pcb_placement).optional(),\n  manual_trace_hints: z.array(manual_trace_hint).optional(),\n  schematic_placements: z.array(manual_schematic_placement).optional(),\n})\n\nexport interface ManualEditsFile {\n  pcb_placements?: ManualPcbPlacement[]\n  manual_trace_hints?: ManualTraceHint[]\n  schematic_placements?: ManualSchematicPlacement[]\n}\n\nexport type ManualEditsFileInput = z.input<typeof manual_edits_file>\n\nexpectTypesMatch<ManualEditsFile, z.infer<typeof manual_edits_file>>(true)\n","import { z } from \"zod\"\nimport { point, type Point } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_pcb_placement = z.object({\n  selector: z.string(),\n  relative_to: z\n    .string()\n    .optional()\n    .default(\"group_center\")\n    .describe(\"Can be a selector or 'group_center'\"),\n  center: point,\n})\n\nexport interface ManualPcbPlacement {\n  selector: string\n  relative_to: string\n  center: Point\n}\n\nexport type ManualPcbPlacementInput = z.input<typeof manual_pcb_placement>\ntype InferredManualPcbPlacement = z.infer<typeof manual_pcb_placement>\n\nexpectTypesMatch<ManualPcbPlacement, InferredManualPcbPlacement>(true)\n","import { z } from \"zod\"\nimport { layer_ref, route_hint_point, type RouteHintPoint } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_trace_hint = z.object({\n  pcb_port_selector: z.string(),\n  offsets: z.array(route_hint_point),\n})\n\nexport interface ManualTraceHint {\n  pcb_port_selector: string\n  offsets: Array<RouteHintPoint>\n}\n\nexport type ManualTraceHintInput = z.input<typeof manual_trace_hint>\n\nexpectTypesMatch<ManualTraceHint, z.infer<typeof manual_trace_hint>>(true)\n","import { z } from \"zod\"\nimport { point, type Point } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_schematic_placement = z.object({\n  selector: z.string(),\n  relative_to: z\n    .string()\n    .optional()\n    .default(\"group_center\")\n    .describe(\"Can be a selector or 'group_center'\"),\n  center: point,\n})\n\nexport interface ManualSchematicPlacement {\n  selector: string\n  relative_to: string\n  center: Point\n}\n\nexport type ManualSchematicPlacementInput = z.input<\n  typeof manual_schematic_placement\n>\ntype InferredManualSchematicPlacement = z.infer<\n  typeof manual_schematic_placement\n>\n\nexpectTypesMatch<ManualSchematicPlacement, InferredManualSchematicPlacement>(\n  true,\n)\n","import { distance } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  type SchematicPortArrangement,\n  schematicPortArrangement as schematicPinArrangement,\n} from \"lib/common/schematicPinDefinitions\"\nimport {\n  type SchematicPinStyle,\n  schematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ChipProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string | readonly string[]>\n  schPinArrangement?: SchematicPortArrangement\n  /** @deprecated Use schPinArrangement instead. */\n  schPortArrangement?: SchematicPortArrangement\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: Distance\n  schWidth?: Distance\n  schHeight?: Distance\n  noSchematicRepresentation?: boolean\n  internallyConnectedPins?: string[][]\n  externallyConnectedPins?: string[][]\n}\n\nexport type PinLabels = Record<\n  number | string,\n  string | readonly string[] | string[]\n>\n\nexport const pinLabelsProp = z.record(\n  z.number().or(z.string()),\n  z.string().or(z.array(z.string()).readonly()).or(z.array(z.string())),\n)\n\nexpectTypesMatch<PinLabels, z.input<typeof pinLabelsProp>>(true)\n\nexport const chipProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z\n    .record(\n      z.number().or(z.string()),\n      z.string().or(z.array(z.string()).readonly()),\n    )\n    .optional(),\n  internallyConnectedPins: z.array(z.array(z.string())).optional(),\n  externallyConnectedPins: z.array(z.array(z.string())).optional(),\n  schPinArrangement: schematicPinArrangement.optional(),\n  schPortArrangement: schematicPinArrangement.optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n  noSchematicRepresentation: z.boolean().optional(),\n})\n\n/**\n * @deprecated Use ChipProps instead.\n */\nexport const bugProps = chipProps\nexport type InferredChipProps = z.input<typeof chipProps>\n\nexpectTypesMatch<InferredChipProps, ChipProps>(true)\n","import { distance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  type SchematicPortArrangement,\n  schematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\nimport {\n  type SchematicPinStyle,\n  schematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface JumperProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string | string[]>\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: number | string\n  schWidth?: number | string\n  schHeight?: number | string\n  schDirection?: \"left\" | \"right\"\n  schPortArrangement?: SchematicPortArrangement\n}\n\nexport const jumperProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z\n    .record(z.number().or(z.string()), z.string().or(z.array(z.string())))\n    .optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n  schDirection: z.enum([\"left\", \"right\"]).optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n})\n\ntype InferredJumperProps = z.input<typeof jumperProps>\nexpectTypesMatch<JumperProps, InferredJumperProps>(true)\n","import { distance } from \"circuit-json\"\nimport type { PcbLayoutProps } from \"lib/common/layout\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { type PortHints, portHints } from \"lib/common/portHints\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface CirclePlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"circle\"\n  holeDiameter: number | string\n  outerDiameter: number | string\n  portHints?: PortHints\n}\n\nexport interface OvalPlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"oval\"\n  outerWidth: number | string\n  outerHeight: number | string\n  innerWidth: number | string\n  innerHeight: number | string\n  portHints?: PortHints\n}\n\nexport interface PillPlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"pill\"\n  outerWidth: number | string\n  outerHeight: number | string\n  innerWidth: number | string\n  innerHeight: number | string\n  portHints?: PortHints\n}\n\nexport type PlatedHoleProps =\n  | CirclePlatedHoleProps\n  | OvalPlatedHoleProps\n  | PillPlatedHoleProps\n\nexport const platedHoleProps = z.discriminatedUnion(\"shape\", [\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"circle\"),\n    holeDiameter: distance,\n    outerDiameter: distance,\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"oval\"),\n    outerWidth: distance,\n    outerHeight: distance,\n    innerWidth: distance,\n    innerHeight: distance,\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"pill\"),\n    outerWidth: distance,\n    outerHeight: distance,\n    innerWidth: distance,\n    innerHeight: distance,\n    portHints: portHints.optional(),\n  }),\n])\n\ntype InferredPlatedHoleProps = z.input<typeof platedHoleProps>\nexpectTypesMatch<PlatedHoleProps, InferredPlatedHoleProps>(true)\n","import { resistance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ResistorProps extends CommonComponentProps {\n  resistance: number | string\n  pullupFor?: string\n  pullupTo?: string\n  pulldownFor?: string\n  pulldownTo?: string\n}\n\nexport const resistorProps = commonComponentProps.extend({\n  resistance,\n\n  pullupFor: z.string().optional(),\n  pullupTo: z.string().optional(),\n\n  pulldownFor: z.string().optional(),\n  pulldownTo: z.string().optional(),\n})\nexport const resistorPins = lrPins\n\ntype InferredResistorProps = z.input<typeof resistorProps>\nexpectTypesMatch<ResistorProps, InferredResistorProps>(true)\n","import { resistance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type PotentiometerPinVariant = \"two_pin\" | \"three_pin\"\n\nexport interface PotentiometerProps extends CommonComponentProps {\n  maxResistance: number | string\n  pinVariant?: PotentiometerPinVariant\n}\n\nexport const potentiometerProps = commonComponentProps.extend({\n  maxResistance: resistance,\n  pinVariant: z.enum([\"two_pin\", \"three_pin\"]).optional(),\n})\n\ntype InferredPotentiometerProps = z.input<typeof potentiometerProps>\nexpectTypesMatch<PotentiometerProps, InferredPotentiometerProps>(true)\n","import { frequency, capacitance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type PinVariant = \"2pin\" | \"4pin\"\n\nexport interface CrystalProps extends CommonComponentProps {\n  frequency: number | string\n  loadCapacitance: number | string\n  pinVariant?: PinVariant\n}\n\nexport const crystalProps = commonComponentProps.extend({\n  frequency: frequency,\n  loadCapacitance: capacitance,\n  pinVariant: z.enum([\"2pin\", \"4pin\"]).optional(),\n})\nexport const crystalPins = lrPins\n\ntype InferredCrystalProps = z.input<typeof crystalProps>\nexpectTypesMatch<CrystalProps, InferredCrystalProps>(true)\n","import { frequency, capacitance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type ResonatorPinVariant = \"no_ground\" | \"ground_pin\" | \"two_ground_pins\"\n\nexport interface ResonatorProps extends CommonComponentProps {\n  frequency: number | string\n  loadCapacitance: number | string\n  pinVariant?: ResonatorPinVariant\n}\n\nexport const resonatorProps = commonComponentProps.extend({\n  frequency: frequency,\n  loadCapacitance: capacitance,\n  pinVariant: z.enum([\"no_ground\", \"ground_pin\", \"two_ground_pins\"]).optional(),\n})\n\ntype InferredResonatorProps = z.input<typeof resonatorProps>\nexpectTypesMatch<ResonatorProps, InferredResonatorProps>(true)\n","import { capacitance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPolarPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface CapacitorProps extends CommonComponentProps {\n  capacitance: number | string\n  polarized?: boolean\n  decouplingFor?: string\n  decouplingTo?: string\n  bypassFor?: string\n  bypassTo?: string\n  maxDecouplingTraceLength?: number\n}\n\nexport const capacitorProps = commonComponentProps.extend({\n  capacitance,\n  polarized: z.boolean().optional().default(false),\n  decouplingFor: z.string().optional(),\n  decouplingTo: z.string().optional(),\n  bypassFor: z.string().optional(),\n  bypassTo: z.string().optional(),\n  maxDecouplingTraceLength: z.number().optional(),\n})\nexport const capacitorPins = lrPolarPins\n\nexpectTypesMatch<CapacitorProps, z.input<typeof capacitorProps>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface NetProps {\n  name: string\n}\n\nexport const netProps = z.object({\n  name: z.string(),\n})\n\ntype InferredNetProps = z.input<typeof netProps>\nexpectTypesMatch<NetProps, InferredNetProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ConstrainedLayoutProps {\n  name?: string\n  pcbOnly?: boolean\n  schOnly?: boolean\n}\n\nexport const constrainedLayoutProps = z.object({\n  name: z.string().optional(),\n  pcbOnly: z.boolean().optional(),\n  schOnly: z.boolean().optional(),\n})\n\nexport type InferredConstrainedLayoutProps = z.input<\n  typeof constrainedLayoutProps\n>\n\nexpectTypesMatch<InferredConstrainedLayoutProps, ConstrainedLayoutProps>(true)\n","import { z } from \"zod\"\n\nexport type Distance = number | string\n\nexport { distance, length } from \"circuit-json\"\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport type { Distance } from \"lib/common/distance\"\nimport { distance } from \"lib/common/distance\"\nimport { z } from \"zod\"\n\nexport type PcbXDistConstraint = {\n  pcb?: true\n  xDist: Distance\n\n  /**\n   * Selector for left component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  left: string\n\n  /**\n   * Selector for right component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  right: string\n\n  /**\n   * If true, the provided distance is the distance between the closest edges of\n   * the left and right components\n   */\n  edgeToEdge?: true\n\n  /**\n   * If true, the provided distance is the distance between the centers of the\n   * left and right components\n   */\n  centerToCenter?: true\n}\n\nexport type PcbYDistConstraint = {\n  pcb?: true\n  yDist: Distance\n\n  /**\n   * Selector for top component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 topedge\", \".R1 center\"\n   */\n  top: string\n\n  /**\n   * Selector for bottom component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 bottomedge\", \".R1 center\"\n   */\n  bottom: string\n\n  edgeToEdge?: true\n  centerToCenter?: true\n}\n\nexport type PcbSameYConstraint = {\n  pcb?: true\n  sameY?: true\n\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type PcbSameXConstraint = {\n  pcb?: true\n  sameX?: true\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type ConstraintProps =\n  | PcbXDistConstraint\n  | PcbYDistConstraint\n  | PcbSameYConstraint\n  | PcbSameXConstraint\n\n// -----------------------------------------------------------------------------\n// Zod\n// -----------------------------------------------------------------------------\n\nexport const pcbXDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  xDist: distance,\n  left: z.string(),\n  right: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbXDistConstraint, z.input<typeof pcbXDistConstraintProps>>(\n  true,\n)\n\nexport const pcbYDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  yDist: distance,\n  top: z.string(),\n  bottom: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbYDistConstraint, z.input<typeof pcbYDistConstraintProps>>(\n  true,\n)\n\nexport const pcbSameYConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameY: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameYConstraint, z.input<typeof pcbSameYConstraintProps>>(\n  true,\n)\n\nexport const pcbSameXConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameX: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameXConstraint, z.input<typeof pcbSameXConstraintProps>>(\n  true,\n)\n\nexport const constraintProps = z.union([\n  pcbXDistConstraintProps,\n  pcbYDistConstraintProps,\n  pcbSameYConstraintProps,\n  pcbSameXConstraintProps,\n])\n\nexpectTypesMatch<ConstraintProps, z.input<typeof constraintProps>>(true)\n","import {\n  pcbLayoutProps,\n  type CommonLayoutProps,\n  type PcbLayoutProps,\n} from \"lib/common/layout\"\nimport { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { portHints, type PortHints } from \"lib/common/portHints\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n  portHints?: PortHints\n}\n\nexport interface RotatedRectSmtPadProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rotated_rect\"\n  width: Distance\n  height: Distance\n  ccwRotation: number\n  portHints?: PortHints\n}\n\nexport interface CircleSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n  portHints?: PortHints\n}\n\nexport interface PillSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"pill\"\n  width: Distance\n  height: Distance\n  radius: Distance\n  portHints?: PortHints\n}\n\nexport type SmtPadProps =\n  | RectSmtPadProps\n  | CircleSmtPadProps\n  | RotatedRectSmtPadProps\n  | PillSmtPadProps\n\n// ----------------------------------------------------------------------------\n// Zod\n// ----------------------------------------------------------------------------\n\nexport const rectSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredRectSmtPadProps = z.input<typeof rectSmtPadProps>\nexpectTypesMatch<InferredRectSmtPadProps, RectSmtPadProps>(true)\n\nexport const rotatedRectSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rotated_rect\"),\n    width: distance,\n    height: distance,\n    ccwRotation: z.number(),\n    portHints: portHints.optional(),\n  })\ntype InferredRotatedRectSmtPadProps = z.input<typeof rotatedRectSmtPadProps>\nexpectTypesMatch<InferredRotatedRectSmtPadProps, RotatedRectSmtPadProps>(true)\n\nexport const circleSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredCircleSmtPadProps = z.input<typeof circleSmtPadProps>\nexpectTypesMatch<InferredCircleSmtPadProps, CircleSmtPadProps>(true)\n\nexport const pillSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"pill\"),\n    width: distance,\n    height: distance,\n    radius: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredPillSmtPadProps = z.input<typeof pillSmtPadProps>\nexpectTypesMatch<InferredPillSmtPadProps, PillSmtPadProps>(true)\n\nexport const smtPadProps = z.union([\n  circleSmtPadProps,\n  rectSmtPadProps,\n  rotatedRectSmtPadProps,\n  pillSmtPadProps,\n])\n\nexport type InferredSmtPadProps = z.input<typeof smtPadProps>\nexpectTypesMatch<InferredSmtPadProps, SmtPadProps>(true)\n","import { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { boolean, string, z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n}\n\nexport interface CircleSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n}\n\nexport type SolderPasteProps = RectSolderPasteProps | CircleSolderPasteProps\n\n// zod\n\nexport const rectSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  })\ntype InferredRectSolderPasteProps = z.input<typeof rectSolderPasteProps>\nexpectTypesMatch<InferredRectSolderPasteProps, RectSolderPasteProps>(true)\n\nexport const circleSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  })\ntype InferredCircleSolderPasteProps = z.input<typeof circleSolderPasteProps>\nexpectTypesMatch<InferredCircleSolderPasteProps, CircleSolderPasteProps>(true)\n\nexport const solderPasteProps = z.union([\n  circleSolderPasteProps,\n  rectSolderPasteProps,\n])\n\nexport type InferredSolderPasteProps = z.input<typeof solderPasteProps>\nexpectTypesMatch<InferredSolderPasteProps, SolderPasteProps>(true)\n","import { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface HoleProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  name?: string\n  diameter?: Distance\n  radius?: Distance\n}\n\nexport const holeProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    name: z.string().optional(),\n    diameter: distance.optional(),\n    radius: distance.optional(),\n  })\n  .transform((d) => ({\n    ...d,\n    diameter: d.diameter ?? 2 * d.radius!,\n    radius: d.radius ?? d.diameter! / 2,\n  }))\n\nexport type InferredHoleProps = z.input<typeof holeProps>\n\nexpectTypesMatch<HoleProps, InferredHoleProps>(true)\n","import { distance, route_hint_point } from \"circuit-json\"\nimport { z } from \"zod\"\nimport { point } from \"../common/point\"\n\nexport const portRef = z.union([\n  z.string(),\n  z.custom<{ getPortSelector: () => string }>((v) =>\n    Boolean(v.getPortSelector),\n  ),\n])\n\nconst baseTraceProps = z.object({\n  key: z.string().optional(),\n  thickness: distance.optional(),\n  schematicRouteHints: z.array(point).optional(),\n  pcbRouteHints: z.array(route_hint_point).optional(),\n  schDisplayLabel: z.string().optional(),\n  maxLength: distance.optional(),\n})\n\nexport const traceProps = z.union([\n  baseTraceProps.extend({\n    path: z.array(portRef),\n  }),\n  baseTraceProps.extend({\n    from: portRef,\n    to: portRef,\n  }),\n])\n\nexport type TraceProps = z.input<typeof traceProps>\n","import { type LayerRef, layer_ref } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface FootprintProps {\n  /**\n   * The layer that the footprint is designed for. If you set this to \"top\"\n   * then it means the children were intended to represent the top layer. If\n   * the <chip /> with this footprint is moved to the bottom layer, then the\n   * components will be mirrored.\n   *\n   * Generally, you shouldn't set this except where it can help prevent\n   * confusion because you have a complex multi-layer footprint. Default is\n   * \"top\" and this is most intuitive.\n   */\n  originalLayer?: LayerRef\n}\n\nexport const footprintProps = z.object({\n  originalLayer: layer_ref.default(\"top\").optional(),\n})\n\nexport type FootprintPropsInput = z.input<typeof footprintProps>\ntype InferredFootprintProps = z.infer<typeof footprintProps>\nexpectTypesMatch<InferredFootprintProps, FootprintProps>(true)\n","import { z } from \"zod\"\nimport {\n  commonComponentProps,\n  lrPins,\n  lrPolarPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\n/** @deprecated use battery_capacity from circuit-json when circuit-json is updated */\nconst capacity = z\n  .number()\n  .or(z.string().endsWith(\"mAh\"))\n  .transform((v) => {\n    if (typeof v === \"string\") {\n      const valString = v.replace(\"mAh\", \"\")\n      const num = Number.parseFloat(valString)\n      if (Number.isNaN(num)) {\n        throw new Error(\"Invalid capacity\")\n      }\n      return num\n    }\n    return v\n  })\n  .describe(\"Battery capacity in mAh\")\n\nexport interface BatteryProps extends CommonComponentProps {\n  capacity?: number | string\n}\n\nexport const batteryProps = commonComponentProps.extend({\n  capacity: capacity.optional(),\n})\nexport const batteryPins = lrPolarPins\n\nexpectTypesMatch<BatteryProps, z.input<typeof batteryProps>>(true)\n","import { distance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface PinHeaderProps extends CommonComponentProps {\n  /**\n   * Number of pins in the header\n   */\n  pinCount: number\n\n  /**\n   * Distance between pins\n   */\n  pitch?: number | string\n\n  /**\n   * Schematic facing direction\n   */\n  schFacingDirection?: \"up\" | \"down\" | \"left\" | \"right\"\n\n  /**\n   * Whether the header is male or female\n   */\n  gender?: \"male\" | \"female\"\n\n  /**\n   * Whether to show pin labels in silkscreen\n   */\n  showSilkscreenPinLabels?: boolean\n\n  /**\n   * Whether the header has two rows of pins\n   */\n  doubleRow?: boolean\n\n  /**\n   * Diameter of the through-hole for each pin\n   */\n  holeDiameter?: number | string\n\n  /**\n   * Diameter of the plated area around each hole\n   */\n  platedDiameter?: number | string\n\n  /**\n   * Labels for each pin\n   */\n  pinLabels?: string[]\n\n  /**\n   * Direction the header is facing\n   */\n  facingDirection?: \"left\" | \"right\"\n}\n\nexport const pinHeaderProps = commonComponentProps.extend({\n  pinCount: z.number(),\n  pitch: distance.optional(),\n  schFacingDirection: z.enum([\"up\", \"down\", \"left\", \"right\"]).optional(),\n  gender: z.enum([\"male\", \"female\"]).optional().default(\"male\"),\n  showSilkscreenPinLabels: z.boolean().optional(),\n  doubleRow: z.boolean().optional(),\n  holeDiameter: distance.optional(),\n  platedDiameter: distance.optional(),\n  pinLabels: z.array(z.string()).optional(),\n  facingDirection: z.enum([\"left\", \"right\"]).optional(),\n})\n\ntype InferredPinHeaderProps = z.input<typeof pinHeaderProps>\nexpectTypesMatch<PinHeaderProps, InferredPinHeaderProps>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { distance } from \"lib/common/distance\"\nimport { rotation } from \"circuit-json\"\n\nexport interface NetAliasProps {\n  net?: string\n  schX?: number | string\n  schY?: number | string\n  schRotation?: number | string\n  anchorSide?: \"left\" | \"up\" | \"right\" | \"down\"\n}\n\nexport const netAliasProps = z.object({\n  net: z.string().optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  anchorSide: z.enum([\"left\", \"up\", \"right\", \"down\"]).optional(),\n})\n\ntype InferredNetAliasProps = z.input<typeof netAliasProps>\nexpectTypesMatch<NetAliasProps, InferredNetAliasProps>(true)\n","import {\n  commonComponentProps,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface PushButtonProps extends CommonComponentProps {\n  internallyConnectedPins?: string[][]\n}\n\nexport const pushButtonProps = commonComponentProps.extend({\n  internallyConnectedPins: z.array(z.array(z.string())).optional(),\n})\ntype InferredPushButtonProps = z.input<typeof pushButtonProps>\n\nexpectTypesMatch<PushButtonProps, InferredPushButtonProps>(true)\n","import type { SubcircuitGroupProps } from \"./group\"\nimport { subcircuitGroupProps } from \"./group\"\nimport type { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type SubcircuitProps = SubcircuitGroupProps\n\nexport const subcircuitProps = subcircuitGroupProps\n\ntype InferredSubcircuitProps = z.input<typeof subcircuitProps>\nexpectTypesMatch<SubcircuitProps, InferredSubcircuitProps>(true)\n","import {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface TransistorProps extends CommonComponentProps {\n  type: \"npn\" | \"pnp\" | \"bjt\" | \"jfet\" | \"mosfet\"\n}\n\nexport const transistorProps = commonComponentProps.extend({\n  type: z.enum([\"npn\", \"pnp\", \"bjt\", \"jfet\", \"mosfet\"]),\n})\n\nexport const transistorPins = [\n  \"pin1\",\n  \"emitter\",\n  \"pin2\",\n  \"collector\",\n  \"pin3\",\n  \"base\",\n] as const\n\ntype InferredTransistorProps = z.input<typeof transistorProps>\nexpectTypesMatch<TransistorProps, InferredTransistorProps>(true)\n","import {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"../common/layout\"\nimport { expectTypesMatch } from \"../typecheck\"\nimport { z } from \"zod\"\n\nexport interface MosfetProps extends CommonComponentProps {\n  channelType: \"n\" | \"p\"\n  mosfetMode: \"enhancement\" | \"depletion\"\n}\n\nexport const mosfetProps = commonComponentProps.extend({\n  channelType: z.enum([\"n\", \"p\"]),\n  mosfetMode: z.enum([\"enhancement\", \"depletion\"]),\n})\n\nexport const mosfetPins = [\n  \"pin1\",\n  \"drain\",\n  \"pin2\",\n  \"source\",\n  \"pin3\",\n  \"gate\",\n] as const\n\ntype InferredMosfetProps = z.input<typeof mosfetProps>\nexpectTypesMatch<MosfetProps, InferredMosfetProps>(true)\n","import { inductance } from \"circuit-json\"\nimport { commonComponentProps, lrPins } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const inductorProps = commonComponentProps.extend({\n  inductance,\n})\nexport const inductorPins = lrPins\nexport type InductorProps = z.input<typeof inductorProps>\n","import { commonComponentProps, lrPolarPins } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const diodeProps = commonComponentProps.extend({})\nexport const diodePins = lrPolarPins\nexport type DiodeProps = z.input<typeof diodeProps>\n","import { commonComponentProps, lrPolarPins } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const ledProps = commonComponentProps.extend({\n  color: z.string().optional(),\n})\nexport const ledPins = lrPolarPins\nexport type LedProps = z.input<typeof ledProps>\n","import {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nimport { z } from \"zod\"\n\nexport interface SwitchProps extends CommonComponentProps {\n  ftype: \"switch\"\n  type?: \"spst\" | \"spdt\" | \"dpst\" | \"dpdt\"\n  isNormallyClosed?: boolean\n  spdt?: boolean\n  spst?: boolean\n  dpst?: boolean\n  dpdt?: boolean\n}\n\nexport const switchProps = commonComponentProps\n  .extend({\n    ftype: z.literal(\"switch\"),\n    type: z.enum([\"spst\", \"spdt\", \"dpst\", \"dpdt\"]).optional(),\n    isNormallyClosed: z.boolean().optional().default(false),\n  })\n  .transform((props) => {\n    // Add boolean properties based on 'type'\n    const updatedProps: SwitchProps = { ...props }\n    switch (updatedProps.type) {\n      case \"spdt\":\n        updatedProps.spdt = true\n        break\n      case \"spst\":\n        updatedProps.spst = true\n        break\n      case \"dpst\":\n        updatedProps.dpst = true\n        break\n      case \"dpdt\":\n        updatedProps.dpdt = true\n        break\n    }\n\n    return updatedProps\n  })\n\nexport type InferredSwitchProps = z.infer<typeof switchProps>\nexpectTypesMatch<SwitchProps, InferredSwitchProps>(true)\n","import { length } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const fabricationNoteTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n  color: z.string().optional(),\n})\nexport type FabricationNoteTextProps = z.input<typeof fabricationNoteTextProps>\n","import { length, route_hint_point } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const fabricationNotePathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n    color: z.string().optional(),\n  })\nexport type FabricationNotePathProps = z.input<typeof fabricationNotePathProps>\n","import { distance, route_hint_point } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const pcbTraceProps = z.object({\n  layer: z.string().optional(),\n  thickness: distance.optional(),\n  route: z.array(route_hint_point),\n})\nexport type PcbTraceProps = z.input<typeof pcbTraceProps>\n","import { distance, layer_ref } from \"circuit-json\"\nimport { commonLayoutProps } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const viaProps = commonLayoutProps.extend({\n  fromLayer: layer_ref,\n  toLayer: layer_ref,\n  holeDiameter: distance,\n  outerDiameter: distance,\n})\nexport type ViaProps = z.input<typeof viaProps>\n","import { distance } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const pcbKeepoutProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true }).extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  }),\n  pcbLayoutProps.extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  }),\n])\nexport type PcbKeepoutProps = z.input<typeof pcbKeepoutProps>\n","import { voltage } from \"circuit-json\"\nimport { commonComponentProps } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const powerSourceProps = commonComponentProps.extend({\n  voltage,\n})\nexport type PowerSourceProps = z.input<typeof powerSourceProps>\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const schematicBoxProps = z.object({\n  schX: distance,\n  schY: distance,\n  width: distance,\n  height: distance,\n})\nexport type SchematicBoxProps = z.input<typeof schematicBoxProps>\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const schematicLineProps = z.object({\n  x1: distance,\n  y1: distance,\n  x2: distance,\n  y2: distance,\n})\nexport type SchematicLineProps = z.input<typeof schematicLineProps>\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const schematicTextProps = z.object({\n  schX: distance,\n  schY: distance,\n  text: z.string(),\n})\nexport type SchematicTextProps = z.input<typeof schematicTextProps>\n","import { point } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const schematicPathProps = z.object({\n  points: z.array(point),\n  isFilled: z.boolean().optional().default(false),\n  fillColor: z.enum([\"red\", \"blue\"]).optional(),\n})\nexport type SchematicPathProps = z.input<typeof schematicPathProps>\n","import { length } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const silkscreenTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n})\nexport type SilkscreenTextProps = z.input<typeof silkscreenTextProps>\n","import { length, route_hint_point } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const silkscreenPathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n  })\nexport type SilkscreenPathProps = z.input<typeof silkscreenPathProps>\n","import { distance } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport type { z } from \"zod\"\n\nexport const silkscreenLineProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    strokeWidth: distance,\n    x1: distance,\n    y1: distance,\n    x2: distance,\n    y2: distance,\n  })\nexport type SilkscreenLineProps = z.input<typeof silkscreenLineProps>\n","import { distance } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const silkscreenRectProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    width: distance,\n    height: distance,\n  })\nexport type SilkscreenRectProps = z.input<typeof silkscreenRectProps>\n","import { distance } from \"circuit-json\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const silkscreenCircleProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    radius: distance,\n  })\nexport type SilkscreenCircleProps = z.input<typeof silkscreenCircleProps>\n","import { distance, layer_ref, route_hint_point } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const routeHintPointProps = z.object({\n  x: distance,\n  y: distance,\n  via: z.boolean().optional(),\n  toLayer: layer_ref.optional(),\n})\n\nexport const traceHintProps = z.object({\n  for: z\n    .string()\n    .optional()\n    .describe(\n      \"Selector for the port you're targeting, not required if you're inside a trace\",\n    ),\n  order: z.number().optional(),\n  offset: route_hint_point.or(routeHintPointProps).optional(),\n  offsets: z\n    .array(route_hint_point)\n    .or(z.array(routeHintPointProps))\n    .optional(),\n  traceWidth: z.number().optional(),\n})\n\nexport type TraceHintProps = z.input<typeof traceHintProps>\n","import { direction } from \"lib/common/direction\"\nimport { commonLayoutProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const portProps = commonLayoutProps.extend({\n  name: z.string(),\n  pinNumber: z.number().optional(),\n  aliases: z.array(z.string()).optional(),\n  direction: direction,\n})\nexport type PortProps = z.input<typeof portProps>\n"],"mappings":";AAYO,IAAM,mBAAmB,CAO9B,aAOS;AAAC;AAIZ,iBAQE,eAAe;AAEjB,iBAQE,iBAAiB;AAEnB,iBAOE,IAAI;AAEN,iBAOE,iCAAiC;;;ACjEnC,SAAS,SAAS;AACX,IAAM,YAAY,EAAE,KAAK,CAAC,MAAM,QAAQ,QAAQ,OAAO,CAAC;AASxD,IAAM,qBAAqB,EAAE,KAAK;AAAA,EACvC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAuD,IAAI;AAC3D,iBAAyE,IAAI;;;ACnB7E,SAAS,KAAAA,UAAS;AAGX,IAAM,YAAYC,GAAE,MAAMA,GAAE,OAAO,EAAE,GAAGA,GAAE,OAAO,CAAC,CAAC;AAG1D,iBAAuD,IAAI;;;ACN3D;AAAA,EAEE,YAAAC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,OACK;AAEP,SAAS,KAAAC,UAAS;;;ACRlB,SAAS,KAAAC,UAAS;;;ACAlB,SAAS,gBAAgB;AACzB,SAAS,KAAAC,UAAS;AAEX,IAAM,SAASA,GAAE,OAAO;AAAA,EAC7B,GAAG;AAAA,EACH,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ADHM,IAAM,iBAAiBC,GAAE,OAAO;AAAA,EACrC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AACrC,CAAC;AAcM,IAAM,eAAeA,GAAE,OAAO;AAAA,EACnC,gBAAgBA,GAAE,OAAO,EAAE,GAAG,cAAc,EAAE,SAAS;AAAA,EACvD,gBAAgB,OAAO,SAAS;AAAA,EAChC,MAAM,OAAO,SAAS;AACxB,CAAC;AAED,iBAA6D,IAAI;AAK1D,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQA,GAAE,OAAO;AACnB,CAAC;AAMM,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQA,GAAE,OAAO;AAAA,EACjB,QAAQA,GAAE,OAAO,EAAE,SAAS;AAC9B,CAAC;AAKM,IAAM,gBAAgB,aAAa,OAAO;AAAA,EAC/C,OAAOA,GAAE,OAAOA,GAAE,IAAI,CAAC;AACzB,CAAC;AAIM,IAAM,eAAeA,GAAE,MAAM;AAAA,EAClCA,GAAE,OAAO;AAAA,EACT;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAqD,IAAI;;;AE7DzD,SAAS,KAAAC,UAAS;AAoBX,IAAM,gBAAgBA,GAAE,OAAkB,CAAC,MAAM,IAAI;;;AHUrD,IAAM,iBAAiBC,GAAE,OAAO;AAAA,EACrC,MAAMC,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,OAAO,UAAU,SAAS;AAC5B,CAAC;AAED,iBAAyD,IAAI;AAEtD,IAAM,oBAAoBD,GAAE,OAAO;AAAA,EACxC,MAAMC,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,MAAMA,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,OAAO,UAAU,SAAS;AAAA,EAC1B,WAAW,cAAc,SAAS;AACpC,CAAC;AAGD,iBAA+D,IAAI;AAa5D,IAAM,gBAAgBD,GAAE,OAAO;AAAA,EACpC,qBAAqBA,GAAE,OAAO,eAAeA,GAAE,MAAMA,GAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAC7E,CAAC;AAED,iBAA+D,IAAI;AAW5D,IAAM,uBAAuB,kBACjC,MAAM,aAAa,EACnB,OAAO;AAAA,EACN,KAAKA,GAAE,IAAI,EAAE,SAAS;AAAA,EACtB,MAAMA,GAAE,OAAO;AAAA,EACf,UAAU,aAAa,SAAS;AAAA,EAChC,UAAUA,GAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,YAAYA,GAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAGH,iBAAqE,IAAI;AAElE,IAAM,iBAAiB;AAGvB,IAAM,SAAS,CAAC,QAAQ,QAAQ,QAAQ,OAAO;AAC/C,IAAM,cAAc;AAAA,EACzB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAEO,IAAM,uBAAuBC,UAAS,GAAGD,GAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;;;AI5G1E,SAAS,KAAAE,UAAS;AAiDX,IAAM,4BAA4BA,GAAE,OAAO;AAAA,EAChD,MAAMA,GAAE,MAAMA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC,CAAC;AAAA,EAC/C,WAAWA,GAAE,MAAM;AAAA,IACjBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,EAC3B,CAAC;AACH,CAAC;AAKM,IAAM,2BAA2BA,GAAE,OAAO;AAAA,EAC/C,UAAUA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,+BAA+B;AAAA,EACxE,SAASA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,8BAA8B;AAAA,EACtE,WAAWA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,gCAAgC;AAAA,EAC1E,YAAYA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,iCAAiC;AAAA,EAC5E,cAAcA,GAAE,OAAO,EAAE,SAAS;AAAA,EAClC,eAAeA,GAAE,OAAO,EAAE,SAAS;AAAA,EACnC,aAAaA,GAAE,OAAO,EAAE,SAAS;AAAA,EACjC,gBAAgBA,GAAE,OAAO,EAAE,SAAS;AAAA,EACpC,UAAU,0BAA0B,SAAS;AAAA,EAC7C,WAAW,0BAA0B,SAAS;AAAA,EAC9C,SAAS,0BAA0B,SAAS;AAAA,EAC5C,YAAY,0BAA0B,SAAS;AACjD,CAAC;AAEM,IAAM,0BAA0B;AAEvC,iBAGE,IAAI;;;ACnFN,SAAS,YAAAC,iBAAgB;AAEzB,SAAS,KAAAC,UAAS;AAqBX,IAAM,oBAAoBA,GAAE;AAAA,EACjCA,GAAE,OAAO;AAAA,IACP,YAAYC,UAAS,SAAS;AAAA,IAC9B,aAAaA,UAAS,SAAS;AAAA,IAC/B,WAAWA,UAAS,SAAS;AAAA,IAC7B,cAAcA,UAAS,SAAS;AAAA,IAEhC,YAAYA,UAAS,SAAS;AAAA,IAC9B,aAAaA,UAAS,SAAS;AAAA,IAC/B,WAAWA,UAAS,SAAS;AAAA,IAC7B,cAAcA,UAAS,SAAS;AAAA,EAClC,CAAC;AACH;AAEA,iBAAuE,IAAI;;;ACpC3E,SAAS,YAAAC,iBAAgB;;;ACDzB,SAAS,YAAAC,iBAAgB;AACzB,SAAS,KAAAC,UAAS;AAEX,IAAM,QAAQA,GAAE,OAAO;AAAA,EAC5B,GAAGD;AAAA,EACH,GAAGA;AACL,CAAC;;;ADDD,SAAS,KAAAE,WAAS;;;AEJlB,SAAS,cAAc;AAQvB,SAAS,KAAAC,WAAS;;;ACRlB,SAAS,KAAAC,WAAS;AAEX,IAAM,yBAAyBA,IAAE,OAAO;AAAA,EAC7C,eAAeA,IAAE,OAAO;AAAA,EACxB,aAAaA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAClC,YAAYA,IAAE,OAAO;AACvB,CAAC;AAUD;AAAA,EACE;AACF;;;ACnBA,SAAS,KAAAC,WAAS;AAOX,IAAM,oCAAoC,uBAAuB,OAAO;AAAA,EAC7E,qBAAqBC,IAClB,QAAQ,yBAAyB,EACjC,SAAS,YAAY;AAAA,EACxB,iBAAiBA,IAAE,QAAQ,6BAA6B;AAAA,EACxD,kBAAkBA,IAAE,OAAO;AAAA,EAC3B,iBAAiBA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AAAA,EAC1D,YAAYA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AACvD,CAAC;AAGM,IAAM,gCAAgC;AAe7C,iBAGE,IAAI;;;ACpCN,SAAS,KAAAC,WAAS;AAMlB,OAAiC;AAE1B,IAAM,wBAAwB,uBAAuB,OAAO;AAAA,EACjE,qBAAqBC,IAAE,QAAQ,iBAAiB,EAAE,SAAS,YAAY;AAAA,EACvE,iBAAiBA,IAAE,QAAQ,qBAAqB,EAAE,SAAS;AAAA,EAC3D,aAAaA,IAAE,OAAO;AAAA,EACtB,mBAAmBA,IAAE,OAAO,EAAE,SAAS;AAAA,EACvC,OAAOA,IAAE;AAAA,IACPA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,GAAG,KAAKA,IAAE,QAAQ,EAAE,SAAS,EAAE,CAAC;AAAA,EACxE;AACF,CAAC;AAaD;AAAA,EACE;AACF;;;AC/BA,SAAS,KAAAC,WAAS;AAOX,IAAM,0CACX,uBAAuB,OAAO;AAAA,EAC5B,iBAAiBC,IAAE,QAAQ,mCAAmC;AAAA,EAC9D,wBAAwBA,IAAE,OAAO;AAAA,EACjC,iBAAiBA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AAAA,EAC1D,YAAYA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AACvD,CAAC;AAcH,iBAGE,IAAI;;;AC9BN,SAAS,KAAAC,WAAS;AAoBX,IAAM,oBAAoBC,IAAE,MAAM;AAAA,EACvC;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAKD,iBAA2D,IAAI;;;AC7B/D,SAAS,KAAAC,WAAS;;;ACAlB,SAAS,KAAAC,WAAS;AAClB,SAAS,SAAAC,cAAyB;AAG3B,IAAM,uBAAuBC,IAAE,OAAO;AAAA,EAC3C,UAAUA,IAAE,OAAO;AAAA,EACnB,aAAaA,IACV,OAAO,EACP,SAAS,EACT,QAAQ,cAAc,EACtB,SAAS,qCAAqC;AAAA,EACjD,QAAQC;AACV,CAAC;AAWD,iBAAiE,IAAI;;;ACvBrE,SAAS,KAAAC,WAAS;AAClB,SAAoB,oBAAAC,yBAA6C;AAG1D,IAAM,oBAAoBC,IAAE,OAAO;AAAA,EACxC,mBAAmBA,IAAE,OAAO;AAAA,EAC5B,SAASA,IAAE,MAAMC,iBAAgB;AACnC,CAAC;AASD,iBAAqE,IAAI;;;AChBzE,SAAS,KAAAC,WAAS;AAClB,SAAS,SAAAC,cAAyB;AAG3B,IAAM,6BAA6BC,IAAE,OAAO;AAAA,EACjD,UAAUA,IAAE,OAAO;AAAA,EACnB,aAAaA,IACV,OAAO,EACP,SAAS,EACT,QAAQ,cAAc,EACtB,SAAS,qCAAqC;AAAA,EACjD,QAAQC;AACV,CAAC;AAeD;AAAA,EACE;AACF;;;AHhBO,IAAM,oBAAoBC,IAAE,OAAO;AAAA,EACxC,gBAAgBA,IAAE,MAAM,oBAAoB,EAAE,SAAS;AAAA,EACvD,oBAAoBA,IAAE,MAAM,iBAAiB,EAAE,SAAS;AAAA,EACxD,sBAAsBA,IAAE,MAAM,0BAA0B,EAAE,SAAS;AACrE,CAAC;AAUD,iBAAqE,IAAI;;;AN0BlE,IAAM,mBAAmBC,IAAE,OAAO;AAAA,EACvC,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,aAAaA,IAAE,KAAK,CAAC,cAAc,cAAc,CAAC,EAAE,SAAS;AAAA,EAC7D,YAAYA,IAAE,KAAK,CAAC,OAAO,gBAAgB,CAAC,EAAE,SAAS;AAAA,EACvD,oBAAoBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EACzC,OAAOA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EACrD,WAAWA,IAAE,KAAK,CAAC,oBAAoB,YAAY,CAAC,EAAE,SAAS;AAAA,EAC/D,OAAOA,IAAE,QAAQ,EAAE,SAAS;AAC9B,CAAC;AAEM,IAAM,iBAAiBA,IAAE,MAAM;AAAA,EACpC;AAAA,EACAA,IAAE,QAAQ,kBAAkB;AAAA,EAC5BA,IAAE,QAAQ,YAAY;AAAA,EACtBA,IAAE,QAAQ,MAAM;AAAA,EAChBA,IAAE,QAAQ,YAAY;AAAA,EACtBA,IAAE,QAAQ,YAAY;AACxB,CAAC;AAqCM,IAAM,iBAAiB,kBAAkB,OAAO;AAAA,EACrD,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAUA,IAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,KAAKA,IAAE,IAAI,EAAE,SAAS;AACxB,CAAC;AAEM,IAAM,uBAAuB,eAAe,OAAO;AAAA,EACxD,QAAQA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EACtD,aAAa,kBAAkB,SAAS;AAAA,EACxC,sBAAsBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC3C,0BAA0BA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC/C,iBAAiBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EACtC,mBAAmB,OAAO,SAAS;AAAA,EACnC,eAAe,OAAO,SAAS;AAAA,EAC/B,aAAaA,IAAE,OAAoB,CAAC,MAAM,cAAc,CAAC,EAAE,SAAS;AAAA,EACpE,eAAeA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EAC7D,YAAY,eAAe,SAAS;AACtC,CAAC;AAEM,IAAM,+BAA+B,qBAAqB,OAAO;AAAA,EACtE,YAAYA,IAAE,QAAQ,IAAI;AAC5B,CAAC;AAEM,IAAM,aAAaA,IAAE,mBAAmB,cAAc;AAAA,EAC3D,eAAe,OAAO,EAAE,YAAYA,IAAE,QAAQ,KAAK,EAAE,SAAS,EAAE,CAAC;AAAA,EACjE;AACF,CAAC;AAOD,iBAAyD,IAAI;AAC7D,iBAGE,IAAI;AAGN,iBAAiD,IAAI;;;AFnI9C,IAAM,aAAa,qBAAqB,OAAO;AAAA,EACpD,OAAOC,UAAS,SAAS;AAAA,EACzB,QAAQA,UAAS,SAAS;AAAA,EAC1B,SAASC,IAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EACjC,gBAAgBD,UAAS,SAAS;AAAA,EAClC,gBAAgBA,UAAS,SAAS;AACpC,CAAC;AAGD,iBAAiD,IAAI;;;AYzBrD,SAAS,YAAAE,iBAAgB;AAezB,SAAS,KAAAC,WAAS;AAsBX,IAAM,gBAAgBA,IAAE;AAAA,EAC7BA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC;AAAA,EACxBA,IAAE,OAAO,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS,CAAC,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC;AACtE;AAEA,iBAA2D,IAAI;AAExD,IAAM,YAAY,qBAAqB,OAAO;AAAA,EACnD,wBAAwBA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAWA,IACR;AAAA,IACCA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC;AAAA,IACxBA,IAAE,OAAO,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS,CAAC;AAAA,EAC9C,EACC,SAAS;AAAA,EACZ,yBAAyBA,IAAE,MAAMA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAAA,EAC/D,yBAAyBA,IAAE,MAAMA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAAA,EAC/D,mBAAmB,yBAAwB,SAAS;AAAA,EACpD,oBAAoB,yBAAwB,SAAS;AAAA,EACrD,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAeC,UAAS,SAAS;AAAA,EACjC,UAAUA,UAAS,SAAS;AAAA,EAC5B,WAAWA,UAAS,SAAS;AAAA,EAC7B,2BAA2BD,IAAE,QAAQ,EAAE,SAAS;AAClD,CAAC;AAKM,IAAM,WAAW;AAGxB,iBAA+C,IAAI;;;ACrEnD,SAAS,YAAAE,iBAAgB;AAczB,SAAS,KAAAC,WAAS;AAaX,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,wBAAwBA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAWA,IACR,OAAOA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC,GAAGA,IAAE,OAAO,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC,CAAC,EACpE,SAAS;AAAA,EACZ,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAeC,UAAS,SAAS;AAAA,EACjC,UAAUA,UAAS,SAAS;AAAA,EAC5B,WAAWA,UAAS,SAAS;AAAA,EAC7B,cAAcD,IAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AAAA,EACjD,oBAAoB,yBAAyB,SAAS;AACxD,CAAC;AAGD,iBAAmD,IAAI;;;ACzCvD,SAAS,YAAAE,iBAAgB;AAKzB,SAAS,KAAAC,WAAS;AAsCX,IAAM,kBAAkBA,IAAE,mBAAmB,SAAS;AAAA,EAC3D,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,QAAQ;AAAA,IACzB,cAAcC;AAAA,IACd,eAAeA;AAAA,IACf,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMD,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,MAAM;AAAA,IACvB,YAAYC;AAAA,IACZ,aAAaA;AAAA,IACb,YAAYA;AAAA,IACZ,aAAaA;AAAA,IACb,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMD,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,MAAM;AAAA,IACvB,YAAYC;AAAA,IACZ,aAAaA;AAAA,IACb,YAAYA;AAAA,IACZ,aAAaA;AAAA,IACb,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AACH,CAAC;AAGD,iBAA2D,IAAI;;;ACxE/D,SAAS,kBAAkB;AAO3B,SAAS,KAAAC,WAAS;AAUX,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AAAA,EAEA,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAUA,IAAE,OAAO,EAAE,SAAS;AAAA,EAE9B,aAAaA,IAAE,OAAO,EAAE,SAAS;AAAA,EACjC,YAAYA,IAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AACM,IAAM,eAAe;AAG5B,iBAAuD,IAAI;;;AC7B3D,SAAS,cAAAC,mBAAkB;AAO3B,SAAS,KAAAC,WAAS;AASX,IAAM,qBAAqB,qBAAqB,OAAO;AAAA,EAC5D,eAAeC;AAAA,EACf,YAAYD,IAAE,KAAK,CAAC,WAAW,WAAW,CAAC,EAAE,SAAS;AACxD,CAAC;AAGD,iBAAiE,IAAI;;;ACtBrE,SAAS,WAAW,mBAAmB;AAOvC,SAAS,KAAAE,WAAS;AAUX,IAAM,eAAe,qBAAqB,OAAO;AAAA,EACtD;AAAA,EACA,iBAAiB;AAAA,EACjB,YAAYA,IAAE,KAAK,CAAC,QAAQ,MAAM,CAAC,EAAE,SAAS;AAChD,CAAC;AACM,IAAM,cAAc;AAG3B,iBAAqD,IAAI;;;ACzBzD,SAAS,aAAAC,YAAW,eAAAC,oBAAmB;AAMvC,SAAS,KAAAC,WAAS;AAUX,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD,WAAWC;AAAA,EACX,iBAAiBC;AAAA,EACjB,YAAYF,IAAE,KAAK,CAAC,aAAa,cAAc,iBAAiB,CAAC,EAAE,SAAS;AAC9E,CAAC;AAGD,iBAAyD,IAAI;;;ACvB7D,SAAS,eAAAG,oBAAmB;AAO5B,SAAS,KAAAC,WAAS;AAYX,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD,aAAAC;AAAA,EACA,WAAWD,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAC/C,eAAeA,IAAE,OAAO,EAAE,SAAS;AAAA,EACnC,cAAcA,IAAE,OAAO,EAAE,SAAS;AAAA,EAClC,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAUA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC9B,0BAA0BA,IAAE,OAAO,EAAE,SAAS;AAChD,CAAC;AACM,IAAM,gBAAgB;AAE7B,iBAAiE,IAAI;;;AC9BrE,SAAS,KAAAE,WAAS;AAOX,IAAM,WAAWC,IAAE,OAAO;AAAA,EAC/B,MAAMA,IAAE,OAAO;AACjB,CAAC;AAGD,iBAA6C,IAAI;;;ACXjD,SAAS,KAAAC,WAAS;AAQX,IAAM,yBAAyBA,IAAE,OAAO;AAAA,EAC7C,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,SAASA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC9B,SAASA,IAAE,QAAQ,EAAE,SAAS;AAChC,CAAC;AAMD,iBAAyE,IAAI;;;ACnB7E,OAAkB;AAIlB,SAAS,YAAAC,WAAU,UAAAC,eAAc;;;ACDjC,SAAS,KAAAC,WAAS;AAkFX,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOC;AAAA,EACP,MAAMD,IAAE,OAAO;AAAA,EACf,OAAOA,IAAE,OAAO;AAAA,EAEhB,YAAYA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgBA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOC;AAAA,EACP,KAAKD,IAAE,OAAO;AAAA,EACd,QAAQA,IAAE,OAAO;AAAA,EAEjB,YAAYA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgBA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAKA,IAAE,MAAMA,IAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAKA,IAAE,MAAMA,IAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,kBAAkBA,IAAE,MAAM;AAAA,EACrC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAmE,IAAI;;;ACnIvE,SAAS,KAAAE,WAAS;AA6CX,IAAM,kBAAkB,eAC5B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOC,IAAE,QAAQ,MAAM;AAAA,EACvB,OAAOC;AAAA,EACP,QAAQA;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA2D,IAAI;AAExD,IAAM,yBAAyB,eACnC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOD,IAAE,QAAQ,cAAc;AAAA,EAC/B,OAAOC;AAAA,EACP,QAAQA;AAAA,EACR,aAAaD,IAAE,OAAO;AAAA,EACtB,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAAyE,IAAI;AAEtE,IAAM,oBAAoB,eAC9B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOA,IAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQC;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA+D,IAAI;AAE5D,IAAM,kBAAkB,eAC5B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOD,IAAE,QAAQ,MAAM;AAAA,EACvB,OAAOC;AAAA,EACP,QAAQA;AAAA,EACR,QAAQA;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA2D,IAAI;AAExD,IAAM,cAAcD,IAAE,MAAM;AAAA,EACjC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAmD,IAAI;;;ACrGvD,SAA0B,KAAAE,WAAS;AAoB5B,IAAM,uBAAuB,eACjC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOC,IAAE,QAAQ,MAAM;AAAA,EACvB,OAAOC;AAAA,EACP,QAAQA;AACV,CAAC;AAEH,iBAAqE,IAAI;AAElE,IAAM,yBAAyB,eACnC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOD,IAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQC;AACV,CAAC;AAEH,iBAAyE,IAAI;AAEtE,IAAM,mBAAmBD,IAAE,MAAM;AAAA,EACtC;AAAA,EACA;AACF,CAAC;AAGD,iBAA6D,IAAI;;;AC/CjE,SAAS,KAAAE,WAAS;AAWX,IAAM,YAAY,eACtB,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,MAAMC,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAUC,UAAS,SAAS;AAAA,EAC5B,QAAQA,UAAS,SAAS;AAC5B,CAAC,EACA,UAAU,CAAC,OAAO;AAAA,EACjB,GAAG;AAAA,EACH,UAAU,EAAE,YAAY,IAAI,EAAE;AAAA,EAC9B,QAAQ,EAAE,UAAU,EAAE,WAAY;AACpC,EAAE;AAIJ,iBAA+C,IAAI;;;AC1BnD,SAAS,YAAAC,YAAU,oBAAAC,yBAAwB;AAC3C,SAAS,KAAAC,WAAS;AAGX,IAAM,UAAUC,IAAE,MAAM;AAAA,EAC7BA,IAAE,OAAO;AAAA,EACTA,IAAE;AAAA,IAA0C,CAAC,MAC3C,QAAQ,EAAE,eAAe;AAAA,EAC3B;AACF,CAAC;AAED,IAAM,iBAAiBA,IAAE,OAAO;AAAA,EAC9B,KAAKA,IAAE,OAAO,EAAE,SAAS;AAAA,EACzB,WAAWC,WAAS,SAAS;AAAA,EAC7B,qBAAqBD,IAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EAC7C,eAAeA,IAAE,MAAME,iBAAgB,EAAE,SAAS;AAAA,EAClD,iBAAiBF,IAAE,OAAO,EAAE,SAAS;AAAA,EACrC,WAAWC,WAAS,SAAS;AAC/B,CAAC;AAEM,IAAM,aAAaD,IAAE,MAAM;AAAA,EAChC,eAAe,OAAO;AAAA,IACpB,MAAMA,IAAE,MAAM,OAAO;AAAA,EACvB,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,MAAM;AAAA,IACN,IAAI;AAAA,EACN,CAAC;AACH,CAAC;;;AC5BD,SAAwB,aAAAG,kBAAiB;AAEzC,SAAS,KAAAC,WAAS;AAgBX,IAAM,iBAAiBA,IAAE,OAAO;AAAA,EACrC,eAAeC,WAAU,QAAQ,KAAK,EAAE,SAAS;AACnD,CAAC;AAID,iBAAyD,IAAI;;;ACxB7D,SAAS,KAAAC,WAAS;AAUlB,IAAM,WAAWC,IACd,OAAO,EACP,GAAGA,IAAE,OAAO,EAAE,SAAS,KAAK,CAAC,EAC7B,UAAU,CAAC,MAAM;AAChB,MAAI,OAAO,MAAM,UAAU;AACzB,UAAM,YAAY,EAAE,QAAQ,OAAO,EAAE;AACrC,UAAM,MAAM,OAAO,WAAW,SAAS;AACvC,QAAI,OAAO,MAAM,GAAG,GAAG;AACrB,YAAM,IAAI,MAAM,kBAAkB;AAAA,IACpC;AACA,WAAO;AAAA,EACT;AACA,SAAO;AACT,CAAC,EACA,SAAS,yBAAyB;AAM9B,IAAM,eAAe,qBAAqB,OAAO;AAAA,EACtD,UAAU,SAAS,SAAS;AAC9B,CAAC;AACM,IAAM,cAAc;AAE3B,iBAA6D,IAAI;;;ACnCjE,SAAS,YAAAC,kBAAgB;AAMzB,SAAS,KAAAC,WAAS;AAsDX,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD,UAAUA,IAAE,OAAO;AAAA,EACnB,OAAOC,WAAS,SAAS;AAAA,EACzB,oBAAoBD,IAAE,KAAK,CAAC,MAAM,QAAQ,QAAQ,OAAO,CAAC,EAAE,SAAS;AAAA,EACrE,QAAQA,IAAE,KAAK,CAAC,QAAQ,QAAQ,CAAC,EAAE,SAAS,EAAE,QAAQ,MAAM;AAAA,EAC5D,yBAAyBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC9C,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,cAAcC,WAAS,SAAS;AAAA,EAChC,gBAAgBA,WAAS,SAAS;AAAA,EAClC,WAAWD,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACxC,iBAAiBA,IAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AACtD,CAAC;AAGD,iBAAyD,IAAI;;;AC1E7D,SAAS,KAAAE,WAAS;AAGlB,SAAS,YAAAC,iBAAgB;AAUlB,IAAM,gBAAgBC,IAAE,OAAO;AAAA,EACpC,KAAKA,IAAE,OAAO,EAAE,SAAS;AAAA,EACzB,MAAMC,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAaF,UAAS,SAAS;AAAA,EAC/B,YAAYC,IAAE,KAAK,CAAC,QAAQ,MAAM,SAAS,MAAM,CAAC,EAAE,SAAS;AAC/D,CAAC;AAGD,iBAAuD,IAAI;;;ACjB3D,SAAS,KAAAE,WAAS;AAMX,IAAM,kBAAkB,qBAAqB,OAAO;AAAA,EACzD,yBAAyBA,IAAE,MAAMA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AACjE,CAAC;AAGD,iBAA2D,IAAI;;;ACTxD,IAAM,kBAAkB;AAG/B,iBAA2D,IAAI;;;ACL/D,SAAS,KAAAC,WAAS;AAMX,IAAM,kBAAkB,qBAAqB,OAAO;AAAA,EACzD,MAAMA,IAAE,KAAK,CAAC,OAAO,OAAO,OAAO,QAAQ,QAAQ,CAAC;AACtD,CAAC;AAEM,IAAM,iBAAiB;AAAA,EAC5B;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAGA,iBAA2D,IAAI;;;ACpB/D,SAAS,KAAAC,WAAS;AAOX,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,aAAaA,IAAE,KAAK,CAAC,KAAK,GAAG,CAAC;AAAA,EAC9B,YAAYA,IAAE,KAAK,CAAC,eAAe,WAAW,CAAC;AACjD,CAAC;AAEM,IAAM,aAAa;AAAA,EACxB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAGA,iBAAmD,IAAI;;;AC3BvD,SAAS,kBAAkB;AAIpB,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AACF,CAAC;AACM,IAAM,eAAe;;;ACJrB,IAAM,aAAa,qBAAqB,OAAO,CAAC,CAAC;AACjD,IAAM,YAAY;;;ACHzB,SAAS,KAAAC,WAAS;AAEX,IAAM,WAAW,qBAAqB,OAAO;AAAA,EAClD,OAAOA,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AACM,IAAM,UAAU;;;ACAvB,SAAS,KAAAC,WAAS;AAYX,IAAM,cAAc,qBACxB,OAAO;AAAA,EACN,OAAOA,IAAE,QAAQ,QAAQ;AAAA,EACzB,MAAMA,IAAE,KAAK,CAAC,QAAQ,QAAQ,QAAQ,MAAM,CAAC,EAAE,SAAS;AAAA,EACxD,kBAAkBA,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AACxD,CAAC,EACA,UAAU,CAAC,UAAU;AAEpB,QAAM,eAA4B,EAAE,GAAG,MAAM;AAC7C,UAAQ,aAAa,MAAM;AAAA,IACzB,KAAK;AACH,mBAAa,OAAO;AACpB;AAAA,IACF,KAAK;AACH,mBAAa,OAAO;AACpB;AAAA,IACF,KAAK;AACH,mBAAa,OAAO;AACpB;AAAA,IACF,KAAK;AACH,mBAAa,OAAO;AACpB;AAAA,EACJ;AAEA,SAAO;AACT,CAAC;AAGH,iBAAmD,IAAI;;;AC9CvD,SAAS,UAAAC,eAAc;AAEvB,SAAS,KAAAC,WAAS;AAEX,IAAM,2BAA2B,eAAe,OAAO;AAAA,EAC5D,MAAMA,IAAE,OAAO;AAAA,EACf,iBAAiBA,IACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAMA,IAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAUC,QAAO,SAAS;AAAA,EAC1B,OAAOD,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;;;ACZD,SAAS,UAAAE,SAAQ,oBAAAC,yBAAwB;AAEzC,SAAS,KAAAC,WAAS;AAEX,IAAM,2BAA2B,eACrC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAOA,IAAE,MAAMC,iBAAgB;AAAA,EAC/B,aAAaC,QAAO,SAAS;AAAA,EAC7B,OAAOF,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;;;ACVH,SAAS,YAAAG,YAAU,oBAAAC,yBAAwB;AAC3C,SAAS,KAAAC,WAAS;AAEX,IAAM,gBAAgBA,IAAE,OAAO;AAAA,EACpC,OAAOA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,WAAWF,WAAS,SAAS;AAAA,EAC7B,OAAOE,IAAE,MAAMD,iBAAgB;AACjC,CAAC;;;ACPD,SAAS,YAAAE,YAAU,aAAAC,kBAAiB;AAI7B,IAAM,WAAW,kBAAkB,OAAO;AAAA,EAC/C,WAAWC;AAAA,EACX,SAASA;AAAA,EACT,cAAcC;AAAA,EACd,eAAeA;AACjB,CAAC;;;ACTD,SAAS,YAAAC,kBAAgB;AAEzB,SAAS,KAAAC,WAAS;AAEX,IAAM,kBAAkBA,IAAE,MAAM;AAAA,EACrC,eAAe,KAAK,EAAE,aAAa,KAAK,CAAC,EAAE,OAAO;AAAA,IAChD,OAAOA,IAAE,QAAQ,QAAQ;AAAA,IACzB,QAAQC;AAAA,EACV,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,OAAOD,IAAE,QAAQ,MAAM;AAAA,IACvB,OAAOC;AAAA,IACP,QAAQA;AAAA,EACV,CAAC;AACH,CAAC;;;ACdD,SAAS,eAAe;AAIjB,IAAM,mBAAmB,qBAAqB,OAAO;AAAA,EAC1D;AACF,CAAC;;;ACND,SAAS,YAAAC,kBAAgB;AACzB,SAAS,KAAAC,WAAS;AAEX,IAAM,oBAAoBA,IAAE,OAAO;AAAA,EACxC,MAAMD;AAAA,EACN,MAAMA;AAAA,EACN,OAAOA;AAAA,EACP,QAAQA;AACV,CAAC;;;ACRD,SAAS,YAAAE,kBAAgB;AACzB,SAAS,KAAAC,WAAS;AAEX,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EACzC,IAAID;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AACN,CAAC;;;ACRD,SAAS,YAAAE,kBAAgB;AACzB,SAAS,KAAAC,WAAS;AAEX,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EACzC,MAAMD;AAAA,EACN,MAAMA;AAAA,EACN,MAAMC,IAAE,OAAO;AACjB,CAAC;;;ACPD,SAAS,SAAAC,cAAa;AACtB,SAAS,KAAAC,WAAS;AAEX,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EACzC,QAAQA,IAAE,MAAMD,MAAK;AAAA,EACrB,UAAUC,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAC9C,WAAWA,IAAE,KAAK,CAAC,OAAO,MAAM,CAAC,EAAE,SAAS;AAC9C,CAAC;;;ACPD,SAAS,UAAAC,eAAc;AAEvB,SAAS,KAAAC,WAAS;AAEX,IAAM,sBAAsB,eAAe,OAAO;AAAA,EACvD,MAAMA,IAAE,OAAO;AAAA,EACf,iBAAiBA,IACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAMA,IAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAUC,QAAO,SAAS;AAC5B,CAAC;;;ACXD,SAAS,UAAAC,SAAQ,oBAAAC,yBAAwB;AAEzC,SAAS,KAAAC,WAAS;AAEX,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAOA,IAAE,MAAMC,iBAAgB;AAAA,EAC/B,aAAaC,QAAO,SAAS;AAC/B,CAAC;;;ACTH,SAAS,YAAAC,kBAAgB;AAIlB,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,aAAaC;AAAA,EACb,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AACN,CAAC;;;ACZH,SAAS,YAAAC,kBAAgB;AAEzB,SAAS,KAAAC,WAAS;AAEX,IAAM,sBAAsB,eAChC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAUA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAaC,WAAS,SAAS;AAAA,EAC/B,OAAOA;AAAA,EACP,QAAQA;AACV,CAAC;;;ACZH,SAAS,YAAAC,kBAAgB;AAEzB,SAAS,KAAAC,WAAS;AAEX,IAAM,wBAAwB,eAClC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAUA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAaC,WAAS,SAAS;AAAA,EAC/B,QAAQA;AACV,CAAC;;;ACXH,SAAS,YAAAC,YAAU,aAAAC,YAAW,oBAAAC,yBAAwB;AACtD,SAAS,KAAAC,WAAS;AAEX,IAAM,sBAAsBA,IAAE,OAAO;AAAA,EAC1C,GAAGH;AAAA,EACH,GAAGA;AAAA,EACH,KAAKG,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC1B,SAASF,WAAU,SAAS;AAC9B,CAAC;AAEM,IAAM,iBAAiBE,IAAE,OAAO;AAAA,EACrC,KAAKA,IACF,OAAO,EACP,SAAS,EACT;AAAA,IACC;AAAA,EACF;AAAA,EACF,OAAOA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,QAAQD,kBAAiB,GAAG,mBAAmB,EAAE,SAAS;AAAA,EAC1D,SAASC,IACN,MAAMD,iBAAgB,EACtB,GAAGC,IAAE,MAAM,mBAAmB,CAAC,EAC/B,SAAS;AAAA,EACZ,YAAYA,IAAE,OAAO,EAAE,SAAS;AAClC,CAAC;;;ACtBD,SAAS,KAAAC,WAAS;AAEX,IAAM,YAAY,kBAAkB,OAAO;AAAA,EAChD,MAAMA,IAAE,OAAO;AAAA,EACf,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,SAASA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACtC;AACF,CAAC;","names":["z","z","distance","z","z","z","z","z","z","distance","z","distance","z","distance","distance","distance","z","z","z","z","z","z","z","z","z","z","z","z","z","z","point","z","point","z","route_hint_point","z","route_hint_point","z","point","z","point","z","z","distance","z","distance","z","distance","distance","z","distance","distance","z","distance","z","resistance","z","resistance","z","frequency","capacitance","z","frequency","capacitance","capacitance","z","capacitance","z","z","z","distance","length","z","distance","z","z","distance","z","z","distance","z","z","distance","distance","route_hint_point","z","z","distance","route_hint_point","layer_ref","z","layer_ref","z","z","distance","z","distance","z","rotation","z","distance","z","z","z","z","z","length","z","length","length","route_hint_point","z","route_hint_point","length","distance","route_hint_point","z","distance","layer_ref","layer_ref","distance","distance","z","distance","distance","z","distance","z","distance","z","point","z","length","z","length","length","route_hint_point","z","route_hint_point","length","distance","distance","distance","z","distance","distance","z","distance","distance","layer_ref","route_hint_point","z","z"]}

package/lib/components/potentiometer.ts

@@ -5,16 +5,19 @@ import {
   lrPins,
 } from "lib/common/layout"
 import { expectTypesMatch } from "lib/typecheck"
-import type { z } from "zod"
+import { z } from "zod"
+
+export type PotentiometerPinVariant = "two_pin" | "three_pin"
 
 export interface PotentiometerProps extends CommonComponentProps {
   maxResistance: number | string
+  pinVariant?: PotentiometerPinVariant
 }
 
 export const potentiometerProps = commonComponentProps.extend({
   maxResistance: resistance,
+  pinVariant: z.enum(["two_pin", "three_pin"]).optional(),
 })
-export const potentiometerPins = lrPins
 
 type InferredPotentiometerProps = z.input<typeof potentiometerProps>
 expectTypesMatch<PotentiometerProps, InferredPotentiometerProps>(true)

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@tscircuit/props",
-  "version": "0.0.144",
+  "version": "0.0.145",
   "description": "Props for tscircuit builtin component types",
   "main": "dist/index.js",
   "type": "module",