@tscircuit/props 0.0.111 → 0.0.112

package/dist/index.d.ts

@@ -1,5 +1,5 @@
 import { z } from 'zod';
-import { LayerRef, LayerRefInput, AnySourceComponent, PcbTrace, RouteHintPoint } from 'circuit-json';
+import { LayerRef, LayerRefInput, AnySourceComponent, PcbTrace, Point as Point$1, RouteHintPoint } from 'circuit-json';
 import { ReactElement } from 'react';
 import * as _tscircuit_layout from '@tscircuit/layout';
 import { LayoutBuilder, ManualEditFile } from '@tscircuit/layout';
@@ -7787,12 +7787,73 @@ interface BaseManualEditEvent {
 }
 type BaseManualEditEventInput = z.input<typeof base_manual_edit_event>;
 
+declare const edit_pcb_component_location_event: z.ZodObject<z.objectUtil.extendShape<{
+    edit_event_id: z.ZodString;
+    in_progress: z.ZodOptional<z.ZodBoolean>;
+    created_at: z.ZodNumber;
+}, {
+    pcb_edit_event_type: z.ZodLiteral<"edit_component_location">;
+    edit_event_type: z.ZodLiteral<"edit_pcb_component_location">;
+    pcb_component_id: z.ZodString;
+    original_center: z.ZodObject<{
+        x: z.ZodNumber;
+        y: z.ZodNumber;
+    }, "strip", z.ZodTypeAny, {
+        x: number;
+        y: number;
+    }, {
+        x: number;
+        y: number;
+    }>;
+    new_center: z.ZodObject<{
+        x: z.ZodNumber;
+        y: z.ZodNumber;
+    }, "strip", z.ZodTypeAny, {
+        x: number;
+        y: number;
+    }, {
+        x: number;
+        y: number;
+    }>;
+}>, "strip", z.ZodTypeAny, {
+    edit_event_id: string;
+    created_at: number;
+    pcb_edit_event_type: "edit_component_location";
+    edit_event_type: "edit_pcb_component_location";
+    pcb_component_id: string;
+    original_center: {
+        x: number;
+        y: number;
+    };
+    new_center: {
+        x: number;
+        y: number;
+    };
+    in_progress?: boolean | undefined;
+}, {
+    edit_event_id: string;
+    created_at: number;
+    pcb_edit_event_type: "edit_component_location";
+    edit_event_type: "edit_pcb_component_location";
+    pcb_component_id: string;
+    original_center: {
+        x: number;
+        y: number;
+    };
+    new_center: {
+        x: number;
+        y: number;
+    };
+    in_progress?: boolean | undefined;
+}>;
+/** @deprecated use edit_pcb_component_location_event instead */
 declare const edit_component_location_event: z.ZodObject<z.objectUtil.extendShape<{
     edit_event_id: z.ZodString;
     in_progress: z.ZodOptional<z.ZodBoolean>;
     created_at: z.ZodNumber;
 }, {
     pcb_edit_event_type: z.ZodLiteral<"edit_component_location">;
+    edit_event_type: z.ZodLiteral<"edit_pcb_component_location">;
     pcb_component_id: z.ZodString;
     original_center: z.ZodObject<{
         x: z.ZodNumber;
@@ -7818,6 +7879,7 @@ declare const edit_component_location_event: z.ZodObject<z.objectUtil.extendShap
     edit_event_id: string;
     created_at: number;
     pcb_edit_event_type: "edit_component_location";
+    edit_event_type: "edit_pcb_component_location";
     pcb_component_id: string;
     original_center: {
         x: number;
@@ -7832,6 +7894,7 @@ declare const edit_component_location_event: z.ZodObject<z.objectUtil.extendShap
     edit_event_id: string;
     created_at: number;
     pcb_edit_event_type: "edit_component_location";
+    edit_event_type: "edit_pcb_component_location";
     pcb_component_id: string;
     original_center: {
         x: number;
@@ -7843,7 +7906,9 @@ declare const edit_component_location_event: z.ZodObject<z.objectUtil.extendShap
     };
     in_progress?: boolean | undefined;
 }>;
-interface EditComponentLocationEvent extends BaseManualEditEvent {
+interface EditPcbComponentLocationEvent extends BaseManualEditEvent {
+    edit_event_type: "edit_pcb_component_location";
+    /** @deprecated */
     pcb_edit_event_type: "edit_component_location";
     pcb_component_id: string;
     original_center: {
@@ -7855,7 +7920,7 @@ interface EditComponentLocationEvent extends BaseManualEditEvent {
         y: number;
     };
 }
-type EditComponentLocationEventInput = z.input<typeof edit_component_location_event>;
+type EditPcbComponentLocationEventInput = z.input<typeof edit_pcb_component_location_event>;
 
 declare const edit_trace_hint_event: z.ZodObject<z.objectUtil.extendShape<{
     edit_event_id: z.ZodString;
@@ -7915,6 +7980,76 @@ interface EditTraceHintEvent extends BaseManualEditEvent {
 }
 type EditTraceHintEventInput = z.input<typeof edit_trace_hint_event>;
 
+declare const edit_schematic_component_location_event: z.ZodObject<z.objectUtil.extendShape<{
+    edit_event_id: z.ZodString;
+    in_progress: z.ZodOptional<z.ZodBoolean>;
+    created_at: z.ZodNumber;
+}, {
+    edit_event_type: z.ZodLiteral<"edit_schematic_component_location">;
+    schematic_component_id: z.ZodString;
+    original_center: z.ZodObject<{
+        x: z.ZodNumber;
+        y: z.ZodNumber;
+    }, "strip", z.ZodTypeAny, {
+        x: number;
+        y: number;
+    }, {
+        x: number;
+        y: number;
+    }>;
+    new_center: z.ZodObject<{
+        x: z.ZodNumber;
+        y: z.ZodNumber;
+    }, "strip", z.ZodTypeAny, {
+        x: number;
+        y: number;
+    }, {
+        x: number;
+        y: number;
+    }>;
+}>, "strip", z.ZodTypeAny, {
+    edit_event_id: string;
+    created_at: number;
+    edit_event_type: "edit_schematic_component_location";
+    original_center: {
+        x: number;
+        y: number;
+    };
+    new_center: {
+        x: number;
+        y: number;
+    };
+    schematic_component_id: string;
+    in_progress?: boolean | undefined;
+}, {
+    edit_event_id: string;
+    created_at: number;
+    edit_event_type: "edit_schematic_component_location";
+    original_center: {
+        x: number;
+        y: number;
+    };
+    new_center: {
+        x: number;
+        y: number;
+    };
+    schematic_component_id: string;
+    in_progress?: boolean | undefined;
+}>;
+interface EditSchematicComponentLocationEvent extends BaseManualEditEvent {
+    edit_event_type: "edit_schematic_component_location";
+    schematic_component_id: string;
+    original_center: {
+        x: number;
+        y: number;
+    };
+    new_center: {
+        x: number;
+        y: number;
+    };
+}
+type EditSchematicComponentLocationEventInput = z.input<typeof edit_schematic_component_location_event>;
+
 declare const manual_edit_file: z.ZodObject<{
     pcb_placements: z.ZodOptional<z.ZodArray<z.ZodObject<{
         selector: z.ZodString;
@@ -7996,6 +8131,34 @@ declare const manual_edit_file: z.ZodObject<{
         }[];
         pcb_port_selector: string;
     }>, "many">>;
+    schematic_placements: z.ZodOptional<z.ZodArray<z.ZodObject<{
+        selector: z.ZodString;
+        relative_to: z.ZodDefault<z.ZodOptional<z.ZodString>>;
+        center: z.ZodObject<{
+            x: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+            y: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+        }, "strip", z.ZodTypeAny, {
+            x: number;
+            y: number;
+        }, {
+            x: string | number;
+            y: string | number;
+        }>;
+    }, "strip", z.ZodTypeAny, {
+        center: {
+            x: number;
+            y: number;
+        };
+        selector: string;
+        relative_to: string;
+    }, {
+        center: {
+            x: string | number;
+            y: string | number;
+        };
+        selector: string;
+        relative_to?: string | undefined;
+    }>, "many">>;
 }, "strip", z.ZodTypeAny, {
     pcb_placements?: {
         center: {
@@ -8015,6 +8178,14 @@ declare const manual_edit_file: z.ZodObject<{
         }[];
         pcb_port_selector: string;
     }[] | undefined;
+    schematic_placements?: {
+        center: {
+            x: number;
+            y: number;
+        };
+        selector: string;
+        relative_to: string;
+    }[] | undefined;
 }, {
     pcb_placements?: {
         center: {
@@ -8036,6 +8207,14 @@ declare const manual_edit_file: z.ZodObject<{
         }[];
         pcb_port_selector: string;
     }[] | undefined;
+    schematic_placements?: {
+        center: {
+            x: string | number;
+            y: string | number;
+        };
+        selector: string;
+        relative_to?: string | undefined;
+    }[] | undefined;
 }>;
 
 declare const manual_pcb_placement: z.ZodObject<{
@@ -8066,8 +8245,47 @@ declare const manual_pcb_placement: z.ZodObject<{
     selector: string;
     relative_to?: string | undefined;
 }>;
-type ManualPcbPosition = z.infer<typeof manual_pcb_placement>;
-type ManualPcbPositionInput = z.input<typeof manual_pcb_placement>;
+interface ManualPcbPlacement {
+    selector: string;
+    relative_to: string;
+    center: Point$1;
+}
+type ManualPcbPlacementInput = z.input<typeof manual_pcb_placement>;
+
+declare const manual_schematic_placement: z.ZodObject<{
+    selector: z.ZodString;
+    relative_to: z.ZodDefault<z.ZodOptional<z.ZodString>>;
+    center: z.ZodObject<{
+        x: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+        y: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+    }, "strip", z.ZodTypeAny, {
+        x: number;
+        y: number;
+    }, {
+        x: string | number;
+        y: string | number;
+    }>;
+}, "strip", z.ZodTypeAny, {
+    center: {
+        x: number;
+        y: number;
+    };
+    selector: string;
+    relative_to: string;
+}, {
+    center: {
+        x: string | number;
+        y: string | number;
+    };
+    selector: string;
+    relative_to?: string | undefined;
+}>;
+interface ManualSchematicPlacement {
+    selector: string;
+    relative_to: string;
+    center: Point$1;
+}
+type ManualSchematicPlacementInput = z.input<typeof manual_schematic_placement>;
 
 declare const manual_trace_hint: z.ZodObject<{
     pcb_port_selector: z.ZodString;
@@ -11388,4 +11606,4 @@ declare const fabricationNotePathProps: z.ZodObject<z.objectUtil.extendShape<Omi
 }>;
 type FabricationNotePathProps = z.input<typeof fabricationNotePathProps>;
 
-export { type AutorouterConfig, type AutorouterProp, type BaseGroupProps, type BaseManualEditEvent, type BaseManualEditEventInput, type BatteryProps, type BoardProps, type CadModelBase, type CadModelJscad, type CadModelObj, type CadModelProp, type CadModelStl, type CapacitorProps, type ChipProps, type CirclePlatedHoleProps, type CircleSmtPadProps, type CircleSolderPasteProps, type CommonComponentProps, type CommonLayoutProps, type ComponentProps, type ConstrainedLayoutProps, type ConstraintProps, type CrystalProps, type DiodeProps, type Direction, type DirectionAlongEdge, type EditComponentLocationEvent, type EditComponentLocationEventInput, type EditTraceHintEvent, type EditTraceHintEventInput, type FabricationNotePathProps, type FabricationNoteTextProps, type Footprint, type FootprintProps, type FootprintPropsInput, type FootprintSoupElements, type GroupProps, type HoleProps, type InductorProps, type InferredChipProps, type InferredConstrainedLayoutProps, type InferredHoleProps, type InferredSmtPadProps, type InferredSolderPasteProps, type JumperProps, type LedProps, type ManualPcbPosition, type ManualPcbPositionInput, type ManualTraceHint, type ManualTraceHintInput, type NetAliasProps, type NetProps, type NonSubcircuitGroupProps, type OvalPlatedHoleProps, type PartsEngine, type PcbKeepoutProps, type PcbLayoutProps, type PcbRouteCache, type PcbSameXConstraint, type PcbSameYConstraint, type PcbTraceProps, type PcbXDistConstraint, type PcbYDistConstraint, type PillPlatedHoleProps, type PinHeaderProps, type PinLabels, type PinSideDefinition, type PinVariant, type PlatedHoleProps, type PortHints, type PortProps, type PotentiometerProps, type PowerSourceProps, type PushButtonProps, type RectSmtPadProps, type RectSolderPasteProps, type ResistorProps, type RotatedRectSmtPadProps, type SchematicBoxProps, type SchematicLineProps, type SchematicPathProps, type SchematicPinStyle, type SchematicPortArrangement, type SchematicPortArrangementWithPinCounts, type SchematicPortArrangementWithSides, type SchematicPortArrangementWithSizes, type SchematicTextProps, type SilkscreenCircleProps, type SilkscreenLineProps, type SilkscreenPathProps, type SilkscreenRectProps, type SilkscreenTextProps, type SmtPadProps, type SolderPasteProps, type SubcircuitGroupProps, type SubcircuitGroupPropsWithBool, type SubcircuitProps, type SupplierName, type SupplierPartNumbers, type SupplierProps, type SwitchProps, type TraceHintProps, type TraceProps, type ViaProps, autorouterConfig, autorouterProp, baseGroupProps, base_manual_edit_event, batteryPins, batteryProps, boardProps, bugProps, cadModelBase, cadModelJscad, cadModelObj, cadModelProp, cadModelStl, capacitorPins, capacitorProps, chipProps, circleSmtPadProps, circleSolderPasteProps, commonComponentProps, commonLayoutProps, componentProps, constrainedLayoutProps, constraintProps, crystalPins, crystalProps, diodePins, diodeProps, direction, directionAlongEdge, distanceOrMultiplier, edit_component_location_event, edit_trace_hint_event, explicitPinSideDefinition, fabricationNotePathProps, fabricationNoteTextProps, footprintProp, footprintProps, groupProps, holeProps, inductorPins, inductorProps, jumperProps, ledPins, ledProps, lrPins, lrPolarPins, manual_edit_file, manual_pcb_placement, manual_trace_hint, netAliasProps, netProps, pcbKeepoutProps, pcbLayoutProps, pcbSameXConstraintProps, pcbSameYConstraintProps, pcbTraceProps, pcbXDistConstraintProps, pcbYDistConstraintProps, pinHeaderProps, pinLabelsProp, platedHoleProps, point3, portHints, portProps, portRef, potentiometerPins, potentiometerProps, powerSourceProps, pushButtonProps, rectSmtPadProps, rectSolderPasteProps, resistorPins, resistorProps, rotatedRectSmtPadProps, rotationPoint3, routeHintPointProps, schematicBoxProps, schematicLineProps, schematicPathProps, schematicPinStyle, schematicPortArrangement, schematicTextProps, silkscreenCircleProps, silkscreenLineProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, smtPadProps, solderPasteProps, subcircuitGroupProps, subcircuitGroupPropsWithBool, subcircuitProps, supplierProps, switchProps, traceHintProps, traceProps, viaProps };
+export { type AutorouterConfig, type AutorouterProp, type BaseGroupProps, type BaseManualEditEvent, type BaseManualEditEventInput, type BatteryProps, type BoardProps, type CadModelBase, type CadModelJscad, type CadModelObj, type CadModelProp, type CadModelStl, type CapacitorProps, type ChipProps, type CirclePlatedHoleProps, type CircleSmtPadProps, type CircleSolderPasteProps, type CommonComponentProps, type CommonLayoutProps, type ComponentProps, type ConstrainedLayoutProps, type ConstraintProps, type CrystalProps, type DiodeProps, type Direction, type DirectionAlongEdge, type EditPcbComponentLocationEvent, type EditPcbComponentLocationEventInput, type EditSchematicComponentLocationEvent, type EditSchematicComponentLocationEventInput, type EditTraceHintEvent, type EditTraceHintEventInput, type FabricationNotePathProps, type FabricationNoteTextProps, type Footprint, type FootprintProps, type FootprintPropsInput, type FootprintSoupElements, type GroupProps, type HoleProps, type InductorProps, type InferredChipProps, type InferredConstrainedLayoutProps, type InferredHoleProps, type InferredSmtPadProps, type InferredSolderPasteProps, type JumperProps, type LedProps, type ManualPcbPlacement, type ManualPcbPlacementInput, type ManualSchematicPlacement, type ManualSchematicPlacementInput, type ManualTraceHint, type ManualTraceHintInput, type NetAliasProps, type NetProps, type NonSubcircuitGroupProps, type OvalPlatedHoleProps, type PartsEngine, type PcbKeepoutProps, type PcbLayoutProps, type PcbRouteCache, type PcbSameXConstraint, type PcbSameYConstraint, type PcbTraceProps, type PcbXDistConstraint, type PcbYDistConstraint, type PillPlatedHoleProps, type PinHeaderProps, type PinLabels, type PinSideDefinition, type PinVariant, type PlatedHoleProps, type PortHints, type PortProps, type PotentiometerProps, type PowerSourceProps, type PushButtonProps, type RectSmtPadProps, type RectSolderPasteProps, type ResistorProps, type RotatedRectSmtPadProps, type SchematicBoxProps, type SchematicLineProps, type SchematicPathProps, type SchematicPinStyle, type SchematicPortArrangement, type SchematicPortArrangementWithPinCounts, type SchematicPortArrangementWithSides, type SchematicPortArrangementWithSizes, type SchematicTextProps, type SilkscreenCircleProps, type SilkscreenLineProps, type SilkscreenPathProps, type SilkscreenRectProps, type SilkscreenTextProps, type SmtPadProps, type SolderPasteProps, type SubcircuitGroupProps, type SubcircuitGroupPropsWithBool, type SubcircuitProps, type SupplierName, type SupplierPartNumbers, type SupplierProps, type SwitchProps, type TraceHintProps, type TraceProps, type ViaProps, autorouterConfig, autorouterProp, baseGroupProps, base_manual_edit_event, batteryPins, batteryProps, boardProps, bugProps, cadModelBase, cadModelJscad, cadModelObj, cadModelProp, cadModelStl, capacitorPins, capacitorProps, chipProps, circleSmtPadProps, circleSolderPasteProps, commonComponentProps, commonLayoutProps, componentProps, constrainedLayoutProps, constraintProps, crystalPins, crystalProps, diodePins, diodeProps, direction, directionAlongEdge, distanceOrMultiplier, edit_component_location_event, edit_pcb_component_location_event, edit_schematic_component_location_event, edit_trace_hint_event, explicitPinSideDefinition, fabricationNotePathProps, fabricationNoteTextProps, footprintProp, footprintProps, groupProps, holeProps, inductorPins, inductorProps, jumperProps, ledPins, ledProps, lrPins, lrPolarPins, manual_edit_file, manual_pcb_placement, manual_schematic_placement, manual_trace_hint, netAliasProps, netProps, pcbKeepoutProps, pcbLayoutProps, pcbSameXConstraintProps, pcbSameYConstraintProps, pcbTraceProps, pcbXDistConstraintProps, pcbYDistConstraintProps, pinHeaderProps, pinLabelsProp, platedHoleProps, point3, portHints, portProps, portRef, potentiometerPins, potentiometerProps, powerSourceProps, pushButtonProps, rectSmtPadProps, rectSolderPasteProps, resistorPins, resistorProps, rotatedRectSmtPadProps, rotationPoint3, routeHintPointProps, schematicBoxProps, schematicLineProps, schematicPathProps, schematicPinStyle, schematicPortArrangement, schematicTextProps, silkscreenCircleProps, silkscreenLineProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, smtPadProps, solderPasteProps, subcircuitGroupProps, subcircuitGroupPropsWithBool, subcircuitProps, supplierProps, switchProps, traceHintProps, traceProps, viaProps };

package/dist/index.js

@@ -4,11 +4,11 @@ import {
   inductance,
   layer_ref as layer_ref4,
   length as length3,
-  point as point4,
+  point as point5,
   route_hint_point as route_hint_point4,
   voltage
 } from "circuit-json";
-import { z as z38 } from "zod";
+import { z as z40 } from "zod";
 
 // lib/typecheck.ts
 var expectTypesMatch = (shouldBe) => {
@@ -585,14 +585,16 @@ expectTypesMatch(
   true
 );
 
-// lib/manual-edits/manual-edit-events/edit_component_location_event.ts
+// lib/manual-edits/manual-edit-events/edit_pcb_component_location_event.ts
 import { z as z32 } from "zod";
-var edit_component_location_event = base_manual_edit_event.extend({
-  pcb_edit_event_type: z32.literal("edit_component_location"),
+var edit_pcb_component_location_event = base_manual_edit_event.extend({
+  pcb_edit_event_type: z32.literal("edit_component_location").describe("deprecated"),
+  edit_event_type: z32.literal("edit_pcb_component_location"),
   pcb_component_id: z32.string(),
   original_center: z32.object({ x: z32.number(), y: z32.number() }),
   new_center: z32.object({ x: z32.number(), y: z32.number() })
 });
+var edit_component_location_event = edit_pcb_component_location_event;
 expectTypesMatch(true);
 
 // lib/manual-edits/manual-edit-events/edit_trace_hint_event.ts
@@ -610,39 +612,63 @@ expectTypesMatch(
   true
 );
 
+// lib/manual-edits/manual-edit-events/edit_schematic_component_location_event.ts
+import { z as z34 } from "zod";
+var edit_schematic_component_location_event = base_manual_edit_event.extend({
+  edit_event_type: z34.literal("edit_schematic_component_location"),
+  schematic_component_id: z34.string(),
+  original_center: z34.object({ x: z34.number(), y: z34.number() }),
+  new_center: z34.object({ x: z34.number(), y: z34.number() })
+});
+expectTypesMatch(true);
+
 // lib/manual-edits/manual_edit_file.ts
-import { z as z37 } from "zod";
+import { z as z39 } from "zod";
 
-// lib/manual-edits/manual_pcb_position.ts
-import { z as z34 } from "zod";
+// lib/manual-edits/manual_pcb_placement.ts
+import { z as z35 } from "zod";
 import { point as point2 } from "circuit-json";
-var manual_pcb_placement = z34.object({
-  selector: z34.string(),
-  relative_to: z34.string().optional().default("group_center").describe("Can be a selector or 'group_center'"),
+var manual_pcb_placement = z35.object({
+  selector: z35.string(),
+  relative_to: z35.string().optional().default("group_center").describe("Can be a selector or 'group_center'"),
   center: point2
 });
+expectTypesMatch(true);
 
 // lib/manual-edits/manual_edit_event.ts
-import { z as z35 } from "zod";
-var manual_edit_event = z35.union([
+import { z as z36 } from "zod";
+var manual_edit_event = z36.union([
   edit_component_location_event,
   edit_trace_hint_event
 ]);
 expectTypesMatch(true);
 
 // lib/manual-edits/manual_trace_hint.ts
-import { z as z36 } from "zod";
+import { z as z37 } from "zod";
 import { route_hint_point as route_hint_point3 } from "circuit-json";
-var manual_trace_hint = z36.object({
-  pcb_port_selector: z36.string(),
-  offsets: z36.array(route_hint_point3)
+var manual_trace_hint = z37.object({
+  pcb_port_selector: z37.string(),
+  offsets: z37.array(route_hint_point3)
 });
 expectTypesMatch(true);
 
+// lib/manual-edits/manual_schematic_placement.ts
+import { z as z38 } from "zod";
+import { point as point4 } from "circuit-json";
+var manual_schematic_placement = z38.object({
+  selector: z38.string(),
+  relative_to: z38.string().optional().default("group_center").describe("Can be a selector or 'group_center'"),
+  center: point4
+});
+expectTypesMatch(
+  true
+);
+
 // lib/manual-edits/manual_edit_file.ts
-var manual_edit_file = z37.object({
-  pcb_placements: z37.array(manual_pcb_placement).optional(),
-  manual_trace_hints: z37.array(manual_trace_hint).optional()
+var manual_edit_file = z39.object({
+  pcb_placements: z39.array(manual_pcb_placement).optional(),
+  manual_trace_hints: z39.array(manual_trace_hint).optional(),
+  schematic_placements: z39.array(manual_schematic_placement).optional()
 });
 
 // lib/index.ts
@@ -653,72 +679,72 @@ var inductorPins = lrPins;
 var diodeProps = commonComponentProps.extend({});
 var diodePins = lrPolarPins;
 var ledProps = commonComponentProps.extend({
-  color: z38.string().optional()
+  color: z40.string().optional()
 });
 var ledPins = lrPolarPins;
 var switchProps = commonComponentProps.extend({
-  ftype: z38.literal("switch"),
-  switchType: z38.enum(["spst"]).default("spst"),
-  isNormallyClosed: z38.boolean().default(false)
+  ftype: z40.literal("switch"),
+  switchType: z40.enum(["spst"]).default("spst"),
+  isNormallyClosed: z40.boolean().default(false)
 });
-var distanceOrMultiplier2 = distance12.or(z38.enum(["2x", "3x", "4x"]));
+var distanceOrMultiplier2 = distance12.or(z40.enum(["2x", "3x", "4x"]));
 var viaProps = commonLayoutProps.extend({
   fromLayer: layer_ref4,
   toLayer: layer_ref4,
   holeDiameter: distance12,
   outerDiameter: distance12
 });
-var pcbKeepoutProps = z38.union([
+var pcbKeepoutProps = z40.union([
   pcbLayoutProps.omit({ pcbRotation: true }).extend({
-    shape: z38.literal("circle"),
+    shape: z40.literal("circle"),
     radius: distance12
   }),
   pcbLayoutProps.extend({
-    shape: z38.literal("rect"),
+    shape: z40.literal("rect"),
     width: distance12,
     height: distance12
   })
 ]);
-var schematicBoxProps = z38.object({
+var schematicBoxProps = z40.object({
   schX: distance12,
   schY: distance12,
   width: distance12,
   height: distance12
 });
-var schematicTextProps = z38.object({
+var schematicTextProps = z40.object({
   schX: distance12,
   schY: distance12,
-  text: z38.string()
+  text: z40.string()
 });
-var schematicLineProps = z38.object({
+var schematicLineProps = z40.object({
   x1: distance12,
   y1: distance12,
   x2: distance12,
   y2: distance12
 });
-var schematicPathProps = z38.object({
-  points: z38.array(point4),
-  isFilled: z38.boolean().optional().default(false),
-  fillColor: z38.enum(["red", "blue"]).optional()
+var schematicPathProps = z40.object({
+  points: z40.array(point5),
+  isFilled: z40.boolean().optional().default(false),
+  fillColor: z40.enum(["red", "blue"]).optional()
 });
 var componentProps = commonComponentProps;
 var powerSourceProps = commonComponentProps.extend({
   voltage
 });
 var portProps = commonLayoutProps.extend({
-  name: z38.string(),
-  pinNumber: z38.number().optional(),
-  aliases: z38.array(z38.string()).optional(),
+  name: z40.string(),
+  pinNumber: z40.number().optional(),
+  aliases: z40.array(z40.string()).optional(),
   direction
 });
 var silkscreenTextProps = pcbLayoutProps.extend({
-  text: z38.string(),
-  anchorAlignment: z38.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  font: z38.enum(["tscircuit2024"]).optional(),
+  text: z40.string(),
+  anchorAlignment: z40.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  font: z40.enum(["tscircuit2024"]).optional(),
   fontSize: length3.optional()
 });
 var silkscreenPathProps = pcbLayoutProps.omit({ pcbX: true, pcbY: true, pcbRotation: true }).extend({
-  route: z38.array(route_hint_point4),
+  route: z40.array(route_hint_point4),
   strokeWidth: length3.optional()
 });
 var silkscreenLineProps = pcbLayoutProps.omit({ pcbX: true, pcbY: true, pcbRotation: true }).extend({
@@ -729,49 +755,49 @@ var silkscreenLineProps = pcbLayoutProps.omit({ pcbX: true, pcbY: true, pcbRotat
   y2: distance12
 });
 var silkscreenRectProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  isFilled: z38.boolean().optional(),
-  isOutline: z38.boolean().optional(),
+  isFilled: z40.boolean().optional(),
+  isOutline: z40.boolean().optional(),
   strokeWidth: distance12.optional(),
   width: distance12,
   height: distance12
 });
 var silkscreenCircleProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  isFilled: z38.boolean().optional(),
-  isOutline: z38.boolean().optional(),
+  isFilled: z40.boolean().optional(),
+  isOutline: z40.boolean().optional(),
   strokeWidth: distance12.optional(),
   radius: distance12
 });
-var routeHintPointProps = z38.object({
+var routeHintPointProps = z40.object({
   x: distance12,
   y: distance12,
-  via: z38.boolean().optional(),
+  via: z40.boolean().optional(),
   toLayer: layer_ref4.optional()
 });
-var traceHintProps = z38.object({
-  for: z38.string().optional().describe(
+var traceHintProps = z40.object({
+  for: z40.string().optional().describe(
     "Selector for the port you're targeting, not required if you're inside a trace"
   ),
-  order: z38.number().optional(),
+  order: z40.number().optional(),
   offset: route_hint_point4.or(routeHintPointProps).optional(),
-  offsets: z38.array(route_hint_point4).or(z38.array(routeHintPointProps)).optional(),
-  traceWidth: z38.number().optional()
+  offsets: z40.array(route_hint_point4).or(z40.array(routeHintPointProps)).optional(),
+  traceWidth: z40.number().optional()
 });
-var pcbTraceProps = z38.object({
-  layer: z38.string().optional(),
+var pcbTraceProps = z40.object({
+  layer: z40.string().optional(),
   thickness: distance12.optional(),
-  route: z38.array(route_hint_point4)
+  route: z40.array(route_hint_point4)
 });
 var fabricationNoteTextProps = pcbLayoutProps.extend({
-  text: z38.string(),
-  anchorAlignment: z38.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  font: z38.enum(["tscircuit2024"]).optional(),
+  text: z40.string(),
+  anchorAlignment: z40.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  font: z40.enum(["tscircuit2024"]).optional(),
   fontSize: length3.optional(),
-  color: z38.string().optional()
+  color: z40.string().optional()
 });
 var fabricationNotePathProps = pcbLayoutProps.omit({ pcbX: true, pcbY: true, pcbRotation: true }).extend({
-  route: z38.array(route_hint_point4),
+  route: z40.array(route_hint_point4),
   strokeWidth: length3.optional(),
-  color: z38.string().optional()
+  color: z40.string().optional()
 });
 export {
   autorouterConfig,
@@ -805,6 +831,8 @@ export {
   directionAlongEdge,
   distanceOrMultiplier2 as distanceOrMultiplier,
   edit_component_location_event,
+  edit_pcb_component_location_event,
+  edit_schematic_component_location_event,
   edit_trace_hint_event,
   explicitPinSideDefinition,
   fabricationNotePathProps,
@@ -822,6 +850,7 @@ export {
   lrPolarPins,
   manual_edit_file,
   manual_pcb_placement,
+  manual_schematic_placement,
   manual_trace_hint,
   netAliasProps,
   netProps,

package/dist/index.js.map

@@ -1 +1 @@
-{"version":3,"sources":["../lib/index.ts","../lib/typecheck.ts","../lib/common/direction.ts","../lib/common/portHints.ts","../lib/common/layout.ts","../lib/common/cadModel.ts","../lib/common/point3.ts","../lib/common/footprintProp.ts","../lib/common/schematicPinDefinitions.ts","../lib/common/schematicPinStyle.ts","../lib/components/board.ts","../lib/common/point.ts","../lib/components/group.ts","../lib/components/chip.ts","../lib/components/jumper.ts","../lib/components/platedhole.ts","../lib/components/resistor.ts","../lib/components/potentiometer.ts","../lib/components/crystal.ts","../lib/components/capacitor.ts","../lib/components/net.ts","../lib/components/constrainedlayout.ts","../lib/common/distance.ts","../lib/components/constraint.ts","../lib/components/smtpad.ts","../lib/components/solderpaste.ts","../lib/components/hole.ts","../lib/components/trace.ts","../lib/components/footprint.ts","../lib/components/battery.ts","../lib/components/pin-header.ts","../lib/components/netalias.ts","../lib/components/push-button.ts","../lib/components/subcircuit.ts","../lib/manual-edits/manual-edit-events/base_manual_edit_event.ts","../lib/manual-edits/manual-edit-events/edit_component_location_event.ts","../lib/manual-edits/manual-edit-events/edit_trace_hint_event.ts","../lib/manual-edits/manual_edit_file.ts","../lib/manual-edits/manual_pcb_position.ts","../lib/manual-edits/manual_edit_event.ts","../lib/manual-edits/manual_trace_hint.ts"],"sourcesContent":["/**\n * THINKING ABOUT ADDING SOMETHING TO THIS FILE?\n *\n * THINK AGAIN!\n *\n * This file is TOO BIG! Create files using the pattern in the surrounding\n * directories, then export from this file.\n */\nimport type { LayoutBuilder } from \"@tscircuit/layout\"\nimport {\n  type AnySoupElementInput,\n  capacitance,\n  distance,\n  inductance,\n  layer_ref,\n  length,\n  type PCBPlatedHoleInput,\n  type PCBSMTPadInput,\n  point,\n  resistance,\n  rotation,\n  route_hint_point,\n  supplier_name,\n  voltage,\n} from \"circuit-json\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\nimport { direction } from \"./common/direction\"\nimport { portHints } from \"./common/portHints\"\nimport {\n  commonComponentProps,\n  commonLayoutProps,\n  lrPins,\n  lrPolarPins,\n  pcbLayoutProps,\n} from \"./common/layout\"\nimport { explicitPinSideDefinition } from \"./common/schematicPinDefinitions\"\n\nexport * from \"./common/direction\"\nexport * from \"./common/portHints\"\nexport * from \"./common/layout\"\nexport * from \"./common/point3\"\nexport * from \"./common/portHints\"\nexport * from \"./common/footprintProp\"\nexport * from \"./common/schematicPinDefinitions\"\nexport * from \"./common/schematicPinStyle\"\nexport * from \"./common/cadModel\"\n\nexport * from \"./components/board\"\nexport * from \"./components/chip\"\nexport * from \"./components/jumper\"\nexport * from \"./components/platedhole\"\n\nexport * from \"./components/resistor\"\nexport * from \"./components/potentiometer\"\nexport * from \"./components/crystal\"\nexport * from \"./components/capacitor\"\nexport * from \"./components/group\"\nexport * from \"./components/net\"\nexport * from \"./components/constrainedlayout\"\nexport * from \"./components/constraint\"\nexport * from \"./components/smtpad\"\nexport * from \"./components/solderpaste\"\nexport * from \"./components/hole\"\nexport * from \"./components/trace\"\nexport * from \"./components/footprint\"\nexport * from \"./components/battery\"\nexport * from \"./components/pin-header\"\nexport * from \"./components/netalias\"\nexport * from \"./components/push-button\"\nexport * from \"./components/subcircuit\"\nexport * from \"./manual-edits\"\n\nexport const inductorProps = commonComponentProps.extend({\n  inductance,\n})\nexport const inductorPins = lrPins\nexport type InductorProps = z.input<typeof inductorProps>\n\nexport const diodeProps = commonComponentProps.extend({})\nexport const diodePins = lrPolarPins\nexport type DiodeProps = z.input<typeof diodeProps>\n\nexport const ledProps = commonComponentProps.extend({\n  color: z.string().optional(),\n})\nexport const ledPins = lrPolarPins\nexport type LedProps = z.input<typeof ledProps>\n\nexport const switchProps = commonComponentProps.extend({\n  ftype: z.literal(\"switch\"),\n  switchType: z.enum([\"spst\"]).default(\"spst\"),\n  isNormallyClosed: z.boolean().default(false),\n})\nexport type SwitchProps = z.input<typeof switchProps>\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n\nexport const viaProps = commonLayoutProps.extend({\n  fromLayer: layer_ref,\n  toLayer: layer_ref,\n  holeDiameter: distance,\n  outerDiameter: distance,\n})\nexport type ViaProps = z.input<typeof viaProps>\n\nexport const pcbKeepoutProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true }).extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  }),\n  pcbLayoutProps.extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  }),\n])\nexport type PcbKeepoutProps = z.input<typeof pcbKeepoutProps>\n\nexport const schematicBoxProps = z.object({\n  schX: distance,\n  schY: distance,\n  width: distance,\n  height: distance,\n})\nexport type SchematicBoxProps = z.input<typeof schematicBoxProps>\n\nexport const schematicTextProps = z.object({\n  schX: distance,\n  schY: distance,\n  text: z.string(),\n})\nexport type SchematicTextProps = z.input<typeof schematicTextProps>\n\nexport const schematicLineProps = z.object({\n  x1: distance,\n  y1: distance,\n  x2: distance,\n  y2: distance,\n})\nexport type SchematicLineProps = z.input<typeof schematicLineProps>\n\nexport const schematicPathProps = z.object({\n  points: z.array(point),\n  isFilled: z.boolean().optional().default(false),\n  fillColor: z.enum([\"red\", \"blue\"]).optional(),\n})\nexport type SchematicPathProps = z.input<typeof schematicPathProps>\n\nexport const componentProps = commonComponentProps\nexport type ComponentProps = z.input<typeof componentProps>\n\nexport const powerSourceProps = commonComponentProps.extend({\n  voltage,\n})\nexport type PowerSourceProps = z.input<typeof powerSourceProps>\n\nexport const portProps = commonLayoutProps.extend({\n  name: z.string(),\n  pinNumber: z.number().optional(),\n  aliases: z.array(z.string()).optional(),\n  direction: direction,\n})\nexport type PortProps = z.input<typeof portProps>\n\nexport const silkscreenTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n})\nexport type SilkscreenTextProps = z.input<typeof silkscreenTextProps>\n\nexport const silkscreenPathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n  })\nexport type SilkscreenPathProps = z.input<typeof silkscreenPathProps>\n\nexport const silkscreenLineProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    strokeWidth: distance,\n    x1: distance,\n    y1: distance,\n    x2: distance,\n    y2: distance,\n  })\nexport type SilkscreenLineProps = z.input<typeof silkscreenLineProps>\n\nexport const silkscreenRectProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    width: distance,\n    height: distance,\n  })\nexport type SilkscreenRectProps = z.input<typeof silkscreenRectProps>\n\nexport const silkscreenCircleProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    radius: distance,\n  })\nexport type SilkscreenCircleProps = z.input<typeof silkscreenCircleProps>\n\nexport const routeHintPointProps = z.object({\n  x: distance,\n  y: distance,\n  via: z.boolean().optional(),\n  toLayer: layer_ref.optional(),\n})\n\nexport const traceHintProps = z.object({\n  for: z\n    .string()\n    .optional()\n    .describe(\n      \"Selector for the port you're targeting, not required if you're inside a trace\",\n    ),\n  order: z.number().optional(),\n  offset: route_hint_point.or(routeHintPointProps).optional(),\n  offsets: z\n    .array(route_hint_point)\n    .or(z.array(routeHintPointProps))\n    .optional(),\n  traceWidth: z.number().optional(),\n})\n\nexport type TraceHintProps = z.input<typeof traceHintProps>\n\nexport const pcbTraceProps = z.object({\n  layer: z.string().optional(),\n  thickness: distance.optional(),\n  route: z.array(route_hint_point),\n})\nexport type PcbTraceProps = z.input<typeof pcbTraceProps>\n\nexport const fabricationNoteTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n  color: z.string().optional(),\n})\nexport type FabricationNoteTextProps = z.input<typeof fabricationNoteTextProps>\n\nexport const fabricationNotePathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n    color: z.string().optional(),\n  })\nexport type FabricationNotePathProps = z.input<typeof fabricationNotePathProps>\n","import type { TypeEqual } from \"ts-expect\"\n\ntype IsNever<T> = [T] extends [never] ? true : false\n\ntype GetMismatchedProps<T1, T2> = {\n  [K in keyof T1 & keyof T2]: T1[K] extends T2[K]\n    ? T2[K] extends T1[K]\n      ? never\n      : K\n    : K\n}[keyof T1 & keyof T2]\n\nexport const expectTypesMatch = <\n  const T1,\n  const T2,\n  T3 = Exclude<keyof T1, keyof T2>,\n  T4 = Exclude<keyof T2, keyof T1>,\n  T5 = GetMismatchedProps<T1, T2>,\n>(\n  shouldBe: IsNever<T3> extends true\n    ? IsNever<T4> extends true\n      ? IsNever<T5> extends true\n        ? TypeEqual<T1, T2>\n        : `property ${T5 extends string ? T5 : \"\"} has mismatched types`\n      : `extra props ${T4 extends string ? T4 : \"\"}`\n    : `missing props ${T3 extends string ? T3 : \"\"}`,\n): void => {}\n\n// ------ TESTS -------\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: number\n    b: number\n  }\n>(\"extra props b\")\n\nexpectTypesMatch<\n  {\n    a: number\n    b: number\n  },\n  {\n    a: number\n  }\n>(\"missing props b\")\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: number\n  }\n>(true)\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: string\n  }\n>(\"property a has mismatched types\")\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nexport const direction = z.enum([\"up\", \"down\", \"left\", \"right\"])\nexport type Direction = \"up\" | \"down\" | \"left\" | \"right\"\n\nexport type DirectionAlongEdge =\n  | \"top-to-bottom\"\n  | \"left-to-right\"\n  | \"bottom-to-top\"\n  | \"right-to-left\"\n\nexport const directionAlongEdge = z.enum([\n  \"top-to-bottom\",\n  \"left-to-right\",\n  \"bottom-to-top\",\n  \"right-to-left\",\n])\n\nexpectTypesMatch<Direction, z.infer<typeof direction>>(true)\nexpectTypesMatch<DirectionAlongEdge, z.infer<typeof directionAlongEdge>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const portHints = z.array(z.string().or(z.number()))\nexport type PortHints = (string | number)[]\n\nexpectTypesMatch<PortHints, z.infer<typeof portHints>>(true)\n","import {\n  type LayerRefInput,\n  distance,\n  layer_ref,\n  rotation,\n  supplier_name,\n} from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport { type CadModelProp, cadModelProp } from \"./cadModel\"\nimport { type Footprint, footprintProp } from \"./footprintProp\"\n\nexport interface PcbLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n  layer?: LayerRefInput\n}\n\nexport interface CommonLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n\n  schX?: string | number\n  schY?: string | number\n  schRotation?: string | number\n\n  layer?: LayerRefInput\n  footprint?: Footprint\n}\n\nexport const pcbLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n})\ntype InferredPcbLayoutProps = z.input<typeof pcbLayoutProps>\nexpectTypesMatch<PcbLayoutProps, InferredPcbLayoutProps>(true)\n\nexport const commonLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n  footprint: footprintProp.optional(),\n})\n\ntype InferredCommonLayoutProps = z.input<typeof commonLayoutProps>\nexpectTypesMatch<CommonLayoutProps, InferredCommonLayoutProps>(true)\n\nexport type SupplierName =\n  | \"jlcpcb\"\n  | \"macrofab\"\n  | \"pcbway\"\n  | \"digikey\"\n  | \"mouser\"\n  | \"lcsc\"\nexport type SupplierPartNumbers = { [k in SupplierName]?: string[] }\nexport interface SupplierProps {\n  supplierPartNumbers?: SupplierPartNumbers\n}\nexport const supplierProps = z.object({\n  supplierPartNumbers: z.record(supplier_name, z.array(z.string())).optional(),\n})\n\nexpectTypesMatch<SupplierProps, z.input<typeof supplierProps>>(true)\n\nexport interface CommonComponentProps extends CommonLayoutProps {\n  key?: any\n  name: string\n  supplierPartNumbers?: SupplierPartNumbers\n  cadModel?: CadModelProp\n  children?: any\n  symbolName?: string\n}\n\nexport const commonComponentProps = commonLayoutProps\n  .merge(supplierProps)\n  .extend({\n    key: z.any().optional(),\n    name: z.string(),\n    cadModel: cadModelProp.optional(),\n    children: z.any().optional(),\n    symbolName: z.string().optional(),\n  })\n\ntype InferredCommonComponentProps = z.input<typeof commonComponentProps>\nexpectTypesMatch<CommonComponentProps, InferredCommonComponentProps>(true)\n\nexport const lrPins = [\"pin1\", \"left\", \"pin2\", \"right\"] as const\nexport const lrPolarPins = [\n  \"pin1\",\n  \"left\",\n  \"anode\",\n  \"pos\",\n  \"pin2\",\n  \"right\",\n  \"cathode\",\n  \"neg\",\n] as const\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n","import { z } from \"zod\"\nimport { point3 } from \"./point3\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const rotationPoint3 = z.object({\n  x: z.union([z.number(), z.string()]),\n  y: z.union([z.number(), z.string()]),\n  z: z.union([z.number(), z.string()]),\n})\n\nexport interface CadModelBase {\n  rotationOffset?:\n    | number\n    | { x: number | string; y: number | string; z: number | string }\n  positionOffset?: {\n    x: number | string\n    y: number | string\n    z: number | string\n  }\n  size?: { x: number | string; y: number | string; z: number | string }\n}\n\nexport const cadModelBase = z.object({\n  rotationOffset: z.number().or(rotationPoint3).optional(),\n  positionOffset: point3.optional(),\n  size: point3.optional(),\n})\n\nexpectTypesMatch<CadModelBase, z.input<typeof cadModelBase>>(true)\n\nexport interface CadModelStl extends CadModelBase {\n  stlUrl: string\n}\nexport const cadModelStl = cadModelBase.extend({\n  stlUrl: z.string(),\n})\n\nexport interface CadModelObj extends CadModelBase {\n  objUrl: string\n  mtlUrl?: string\n}\nexport const cadModelObj = cadModelBase.extend({\n  objUrl: z.string(),\n  mtlUrl: z.string().optional(),\n})\n\nexport interface CadModelJscad extends CadModelBase {\n  jscad: Record<string, any>\n}\nexport const cadModelJscad = cadModelBase.extend({\n  jscad: z.record(z.any()),\n})\n\nexport type CadModelProp = string | CadModelStl | CadModelObj | CadModelJscad\n\nexport const cadModelProp = z.union([\n  z.string(),\n  cadModelStl,\n  cadModelObj,\n  cadModelJscad,\n])\n\ntype InferredCadModelProp = z.input<typeof cadModelProp>\nexpectTypesMatch<CadModelProp, InferredCadModelProp>(true)\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const point3 = z.object({\n  x: distance,\n  y: distance,\n  z: distance,\n})\n","import type { LayerRef } from \"circuit-json\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\n\n/**\n * This is an abbreviated definition of the soup elements that you can find here:\n * https://docs.tscircuit.com/api-reference/advanced/soup#pcb-smtpad\n */\nexport type FootprintSoupElements = {\n  type: \"pcb_smtpad\" | \"pcb_plated_hole\"\n  x: string | number\n  y: string | number\n  layer?: LayerRef\n  holeDiameter?: string | number\n  outerDiameter?: string | number\n  shape?: \"circle\" | \"rect\"\n  width?: string | number\n  height?: string | number\n  portHints?: string[]\n}\n\nexport type Footprint = string | ReactElement | FootprintSoupElements[]\nexport const footprintProp = z.custom<Footprint>((v) => true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\n/**\n * @deprecated Use SchematicPortArrangementWithPinCounts instead.\n */\nexport interface SchematicPortArrangementWithSizes {\n  leftSize?: number\n  topSize?: number\n  rightSize?: number\n  bottomSize?: number\n}\n\n/**\n * Specifies the number of pins on each side of the schematic box component.\n */\nexport interface SchematicPortArrangementWithPinCounts {\n  leftPinCount?: number\n  topPinCount?: number\n  rightPinCount?: number\n  bottomPinCount?: number\n}\n\nexport interface PinSideDefinition {\n  pins: Array<number | string>\n  direction:\n    | \"top-to-bottom\"\n    | \"left-to-right\"\n    | \"bottom-to-top\"\n    | \"right-to-left\"\n}\n\nexport interface SchematicPortArrangementWithSides {\n  leftSide?: PinSideDefinition\n  topSide?: PinSideDefinition\n  rightSide?: PinSideDefinition\n  bottomSide?: PinSideDefinition\n}\n\nexport interface SchematicPortArrangement\n  extends SchematicPortArrangementWithSizes,\n    SchematicPortArrangementWithSides,\n    SchematicPortArrangementWithPinCounts {}\n\nexport const explicitPinSideDefinition = z.object({\n  pins: z.array(z.union([z.number(), z.string()])),\n  direction: z.union([\n    z.literal(\"top-to-bottom\"),\n    z.literal(\"left-to-right\"),\n    z.literal(\"bottom-to-top\"),\n    z.literal(\"right-to-left\"),\n  ]),\n})\n\nexport const schematicPortArrangement = z.object({\n  leftSize: z.number().optional().describe(\"@deprecated, use leftPinCount\"),\n  topSize: z.number().optional().describe(\"@deprecated, use topPinCount\"),\n  rightSize: z.number().optional().describe(\"@deprecated, use rightPinCount\"),\n  bottomSize: z.number().optional().describe(\"@deprecated, use bottomPinCount\"),\n  leftPinCount: z.number().optional(),\n  rightPinCount: z.number().optional(),\n  topPinCount: z.number().optional(),\n  bottomPinCount: z.number().optional(),\n  leftSide: explicitPinSideDefinition.optional(),\n  rightSide: explicitPinSideDefinition.optional(),\n  topSide: explicitPinSideDefinition.optional(),\n  bottomSide: explicitPinSideDefinition.optional(),\n})\n\nexpectTypesMatch<\n  SchematicPortArrangement,\n  z.input<typeof schematicPortArrangement>\n>(true)\n","import { distance } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type SchematicPinStyle = Record<\n  string,\n  {\n    leftMargin?: number | string\n    rightMargin?: number | string\n    topMargin?: number | string\n    bottomMargin?: number | string\n  }\n>\n\nexport const schematicPinStyle = z.record(\n  z.object({\n    leftMargin: distance.optional(),\n    rightMargin: distance.optional(),\n    topMargin: distance.optional(),\n    bottomMargin: distance.optional(),\n  }),\n)\n\nexpectTypesMatch<SchematicPinStyle, z.input<typeof schematicPinStyle>>(true)\n","import type { LayoutBuilder, ManualEditFile } from \"@tscircuit/layout\"\nimport { distance } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport { type Point, point } from \"lib/common/point\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport { subcircuitGroupProps, type SubcircuitGroupProps } from \"./group\"\n\nexport interface BoardProps extends Omit<SubcircuitGroupProps, \"subcircuit\"> {\n  width?: number | string\n  height?: number | string\n  outline?: Point[]\n}\n\nexport const boardProps = subcircuitGroupProps.extend({\n  width: distance.optional(),\n  height: distance.optional(),\n  outline: z.array(point).optional(),\n})\n\ntype InferredBoardProps = z.input<typeof boardProps>\nexpectTypesMatch<BoardProps, InferredBoardProps>(true)\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const point = z.object({\n  x: distance,\n  y: distance,\n})\n\nexport type Point = { x: number | string; y: number | string }\n","import type { LayoutBuilder, ManualEditFile } from \"@tscircuit/layout\"\nimport { length } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport {\n  type CommonLayoutProps,\n  commonLayoutProps,\n  type SupplierPartNumbers,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport type { AnySourceComponent, PcbTrace } from \"circuit-json\"\n\nexport interface BaseGroupProps extends CommonLayoutProps {\n  name?: string\n  children?: any\n}\n\nexport type PartsEngine = {\n  findPart: (params: {\n    sourceComponent: AnySourceComponent\n    footprinterString?: string\n  }) => Promise<SupplierPartNumbers> | SupplierPartNumbers\n}\n\nexport interface PcbRouteCache {\n  pcbTraces: PcbTrace[]\n  cacheKey: string\n}\n\nexport interface AutorouterConfig {\n  serverUrl?: string\n  inputFormat?: \"simplified\" | \"circuit-json\"\n  serverMode?: \"job\" | \"solve-endpoint\"\n  cache?: PcbRouteCache\n}\n\nexport type AutorouterProp =\n  | AutorouterConfig\n  | \"sequential-trace\"\n  | \"subcircuit\"\n  | \"auto\"\n  | \"auto-local\"\n  | \"auto-cloud\"\n\nexport const autorouterConfig = z.object({\n  serverUrl: z.string().optional(),\n  inputFormat: z.enum([\"simplified\", \"circuit-json\"]).optional(),\n  serverMode: z.enum([\"job\", \"solve-endpoint\"]).optional(),\n  cache: z.custom<PcbRouteCache>((v) => true).optional(),\n})\n\nexport const autorouterProp = z.union([\n  autorouterConfig,\n  z.literal(\"sequential-trace\"),\n  z.literal(\"subcircuit\"),\n  z.literal(\"auto\"),\n  z.literal(\"auto-local\"),\n  z.literal(\"auto-cloud\"),\n])\n\nexport interface SubcircuitGroupProps extends BaseGroupProps {\n  layout?: LayoutBuilder\n  manualEdits?: ManualEditFile\n  routingDisabled?: boolean\n  defaultTraceWidth?: Distance\n  minTraceWidth?: Distance\n  pcbRouteCache?: PcbRouteCache\n\n  autorouter?: AutorouterProp\n\n  /**\n   * If true, we'll automatically layout the schematic for this group. Must be\n   * a subcircuit (currently). This is eventually going to be replaced with more\n   * sophisticated layout options/modes and will be enabled by default.\n   */\n  schAutoLayoutEnabled?: boolean\n\n  partsEngine?: PartsEngine\n}\n\nexport interface SubcircuitGroupPropsWithBool extends SubcircuitGroupProps {\n  subcircuit: true\n}\n\nexport interface NonSubcircuitGroupProps extends BaseGroupProps {\n  subcircuit?: false | undefined\n}\n\nexport type GroupProps = SubcircuitGroupPropsWithBool | NonSubcircuitGroupProps\n\nexport const baseGroupProps = commonLayoutProps.extend({\n  name: z.string().optional(),\n  children: z.any().optional(),\n})\n\nexport const subcircuitGroupProps = baseGroupProps.extend({\n  layout: z.custom<LayoutBuilder>((v) => true).optional(),\n  manualEdits: z.custom<ManualEditFile>((v) => true).optional(),\n  schAutoLayoutEnabled: z.boolean().optional(),\n  routingDisabled: z.boolean().optional(),\n  defaultTraceWidth: length.optional(),\n  minTraceWidth: length.optional(),\n  partsEngine: z.custom<PartsEngine>((v) => \"findPart\" in v).optional(),\n  pcbRouteCache: z.custom<PcbRouteCache>((v) => true).optional(),\n  autorouter: autorouterProp.optional(),\n})\n\nexport const subcircuitGroupPropsWithBool = subcircuitGroupProps.extend({\n  subcircuit: z.literal(true),\n})\n\nexport const groupProps = z.discriminatedUnion(\"subcircuit\", [\n  baseGroupProps.extend({ subcircuit: z.literal(false).optional() }),\n  subcircuitGroupPropsWithBool,\n])\n\ntype InferredBaseGroupProps = z.input<typeof baseGroupProps>\ntype InferredSubcircuitGroupPropsWithBool = z.input<\n  typeof subcircuitGroupPropsWithBool\n>\n\nexpectTypesMatch<BaseGroupProps, InferredBaseGroupProps>(true)\nexpectTypesMatch<\n  SubcircuitGroupPropsWithBool,\n  InferredSubcircuitGroupPropsWithBool\n>(true)\n\ntype InferredGroupProps = z.input<typeof groupProps>\nexpectTypesMatch<GroupProps, InferredGroupProps>(true)\n","import { distance } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  type SchematicPortArrangement,\n  schematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\nimport {\n  type SchematicPinStyle,\n  schematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ChipProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string | readonly string[]>\n  schPortArrangement?: SchematicPortArrangement\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: Distance\n  schWidth?: Distance\n  schHeight?: Distance\n}\n\nexport type PinLabels = Record<\n  number | string,\n  string | readonly string[] | string[]\n>\n\nexport const pinLabelsProp = z.record(\n  z.number().or(z.string()),\n  z.string().or(z.array(z.string()).readonly()).or(z.array(z.string())),\n)\n\nexpectTypesMatch<PinLabels, z.input<typeof pinLabelsProp>>(true)\n\nexport const chipProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z\n    .record(\n      z.number().or(z.string()),\n      z.string().or(z.array(z.string()).readonly()),\n    )\n    .optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n})\n\n/**\n * @deprecated Use ChipProps instead.\n */\nexport const bugProps = chipProps\nexport type InferredChipProps = z.input<typeof chipProps>\n\nexpectTypesMatch<InferredChipProps, ChipProps>(true)\n","import { distance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  type SchematicPortArrangement,\n  schematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\nimport {\n  type SchematicPinStyle,\n  schematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface JumperProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string | string[]>\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: number | string\n  schWidth?: number | string\n  schHeight?: number | string\n  schDirection?: \"left\" | \"right\"\n  schPortArrangement?: SchematicPortArrangement\n}\n\nexport const jumperProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z\n    .record(z.number().or(z.string()), z.string().or(z.array(z.string())))\n    .optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n  schDirection: z.enum([\"left\", \"right\"]).optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n})\n\ntype InferredJumperProps = z.input<typeof jumperProps>\nexpectTypesMatch<JumperProps, InferredJumperProps>(true)\n","import { distance } from \"circuit-json\"\nimport type { PcbLayoutProps } from \"lib/common/layout\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { type PortHints, portHints } from \"lib/common/portHints\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface CirclePlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"circle\"\n  holeDiameter: number | string\n  outerDiameter: number | string\n  portHints?: PortHints\n}\n\nexport interface OvalPlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"oval\"\n  outerWidth: number | string\n  outerHeight: number | string\n  innerWidth: number | string\n  innerHeight: number | string\n  portHints?: PortHints\n}\n\nexport interface PillPlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"pill\"\n  outerWidth: number | string\n  outerHeight: number | string\n  innerWidth: number | string\n  innerHeight: number | string\n  portHints?: PortHints\n}\n\nexport type PlatedHoleProps =\n  | CirclePlatedHoleProps\n  | OvalPlatedHoleProps\n  | PillPlatedHoleProps\n\nexport const platedHoleProps = z.discriminatedUnion(\"shape\", [\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"circle\"),\n    holeDiameter: distance,\n    outerDiameter: distance,\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"oval\"),\n    outerWidth: distance,\n    outerHeight: distance,\n    innerWidth: distance,\n    innerHeight: distance,\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"pill\"),\n    outerWidth: distance,\n    outerHeight: distance,\n    innerWidth: distance,\n    innerHeight: distance,\n    portHints: portHints.optional(),\n  }),\n])\n\ntype InferredPlatedHoleProps = z.input<typeof platedHoleProps>\nexpectTypesMatch<PlatedHoleProps, InferredPlatedHoleProps>(true)\n","import { resistance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ResistorProps extends CommonComponentProps {\n  resistance: number | string\n  pullupFor?: string\n  pullupTo?: string\n  pulldownFor?: string\n  pulldownTo?: string\n}\n\nexport const resistorProps = commonComponentProps.extend({\n  resistance,\n\n  pullupFor: z.string().optional(),\n  pullupTo: z.string().optional(),\n\n  pulldownFor: z.string().optional(),\n  pulldownTo: z.string().optional(),\n})\nexport const resistorPins = lrPins\n\ntype InferredResistorProps = z.input<typeof resistorProps>\nexpectTypesMatch<ResistorProps, InferredResistorProps>(true)\n","import { resistance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport type { z } from \"zod\"\n\nexport interface PotentiometerProps extends CommonComponentProps {\n  maxResistance: number | string\n}\n\nexport const potentiometerProps = commonComponentProps.extend({\n  maxResistance: resistance,\n})\nexport const potentiometerPins = lrPins\n\ntype InferredPotentiometerProps = z.input<typeof potentiometerProps>\nexpectTypesMatch<PotentiometerProps, InferredPotentiometerProps>(true)\n","import { frequency, capacitance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type PinVariant = \"2pin\" | \"4pin\"\n\nexport interface CrystalProps extends CommonComponentProps {\n  frequency: number | string\n  loadCapacitance: number | string\n  pinVariant?: PinVariant\n}\n\nexport const crystalProps = commonComponentProps.extend({\n  frequency: frequency,\n  loadCapacitance: capacitance,\n  pinVariant: z.enum([\"2pin\", \"4pin\"]).optional(),\n})\nexport const crystalPins = lrPins\n\ntype InferredCrystalProps = z.input<typeof crystalProps>\nexpectTypesMatch<CrystalProps, InferredCrystalProps>(true)\n","import { capacitance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPolarPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface CapacitorProps extends CommonComponentProps {\n  capacitance: number | string\n  polarized?: boolean\n\n  decouplingFor?: string\n  decouplingTo?: string\n\n  bypassFor?: string\n  bypassTo?: string\n}\n\nexport const capacitorProps = commonComponentProps.extend({\n  capacitance,\n\n  polarized: z.boolean().optional().default(false),\n\n  decouplingFor: z.string().optional(),\n  decouplingTo: z.string().optional(),\n\n  bypassFor: z.string().optional(),\n  bypassTo: z.string().optional(),\n})\nexport const capacitorPins = lrPolarPins\n\nexpectTypesMatch<CapacitorProps, z.input<typeof capacitorProps>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface NetProps {\n  name: string\n}\n\nexport const netProps = z.object({\n  name: z.string(),\n})\n\ntype InferredNetProps = z.input<typeof netProps>\nexpectTypesMatch<NetProps, InferredNetProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ConstrainedLayoutProps {\n  name?: string\n  pcbOnly?: boolean\n  schOnly?: boolean\n}\n\nexport const constrainedLayoutProps = z.object({\n  name: z.string().optional(),\n  pcbOnly: z.boolean().optional(),\n  schOnly: z.boolean().optional(),\n})\n\nexport type InferredConstrainedLayoutProps = z.input<\n  typeof constrainedLayoutProps\n>\n\nexpectTypesMatch<InferredConstrainedLayoutProps, ConstrainedLayoutProps>(true)\n","import { z } from \"zod\"\n\nexport type Distance = number | string\n\nexport { distance, length } from \"circuit-json\"\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport type { Distance } from \"lib/common/distance\"\nimport { distance } from \"lib/common/distance\"\nimport { z } from \"zod\"\n\nexport type PcbXDistConstraint = {\n  pcb?: true\n  xDist: Distance\n\n  /**\n   * Selector for left component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  left: string\n\n  /**\n   * Selector for right component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  right: string\n\n  /**\n   * If true, the provided distance is the distance between the closest edges of\n   * the left and right components\n   */\n  edgeToEdge?: true\n\n  /**\n   * If true, the provided distance is the distance between the centers of the\n   * left and right components\n   */\n  centerToCenter?: true\n}\n\nexport type PcbYDistConstraint = {\n  pcb?: true\n  yDist: Distance\n\n  /**\n   * Selector for top component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 topedge\", \".R1 center\"\n   */\n  top: string\n\n  /**\n   * Selector for bottom component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 bottomedge\", \".R1 center\"\n   */\n  bottom: string\n\n  edgeToEdge?: true\n  centerToCenter?: true\n}\n\nexport type PcbSameYConstraint = {\n  pcb?: true\n  sameY?: true\n\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type PcbSameXConstraint = {\n  pcb?: true\n  sameX?: true\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type ConstraintProps =\n  | PcbXDistConstraint\n  | PcbYDistConstraint\n  | PcbSameYConstraint\n  | PcbSameXConstraint\n\n// -----------------------------------------------------------------------------\n// Zod\n// -----------------------------------------------------------------------------\n\nexport const pcbXDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  xDist: distance,\n  left: z.string(),\n  right: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbXDistConstraint, z.input<typeof pcbXDistConstraintProps>>(\n  true,\n)\n\nexport const pcbYDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  yDist: distance,\n  top: z.string(),\n  bottom: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbYDistConstraint, z.input<typeof pcbYDistConstraintProps>>(\n  true,\n)\n\nexport const pcbSameYConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameY: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameYConstraint, z.input<typeof pcbSameYConstraintProps>>(\n  true,\n)\n\nexport const pcbSameXConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameX: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameXConstraint, z.input<typeof pcbSameXConstraintProps>>(\n  true,\n)\n\nexport const constraintProps = z.union([\n  pcbXDistConstraintProps,\n  pcbYDistConstraintProps,\n  pcbSameYConstraintProps,\n  pcbSameXConstraintProps,\n])\n\nexpectTypesMatch<ConstraintProps, z.input<typeof constraintProps>>(true)\n","import {\n  pcbLayoutProps,\n  type CommonLayoutProps,\n  type PcbLayoutProps,\n} from \"lib/common/layout\"\nimport { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { portHints, type PortHints } from \"lib/common/portHints\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n  portHints?: PortHints\n}\n\nexport interface RotatedRectSmtPadProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rotated_rect\"\n  width: Distance\n  height: Distance\n  ccwRotation: number\n  portHints?: PortHints\n}\n\nexport interface CircleSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n  portHints?: PortHints\n}\n\nexport type SmtPadProps =\n  | RectSmtPadProps\n  | CircleSmtPadProps\n  | RotatedRectSmtPadProps\n\n// ----------------------------------------------------------------------------\n// Zod\n// ----------------------------------------------------------------------------\n\nexport const rectSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredRectSmtPadProps = z.input<typeof rectSmtPadProps>\nexpectTypesMatch<InferredRectSmtPadProps, RectSmtPadProps>(true)\n\nexport const rotatedRectSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rotated_rect\"),\n    width: distance,\n    height: distance,\n    ccwRotation: z.number(),\n    portHints: portHints.optional(),\n  })\ntype InferredRotatedRectSmtPadProps = z.input<typeof rotatedRectSmtPadProps>\nexpectTypesMatch<InferredRotatedRectSmtPadProps, RotatedRectSmtPadProps>(true)\n\nexport const circleSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredCircleSmtPadProps = z.input<typeof circleSmtPadProps>\nexpectTypesMatch<InferredCircleSmtPadProps, CircleSmtPadProps>(true)\n\nexport const smtPadProps = z.union([\n  circleSmtPadProps,\n  rectSmtPadProps,\n  rotatedRectSmtPadProps,\n])\n\nexport type InferredSmtPadProps = z.input<typeof smtPadProps>\nexpectTypesMatch<InferredSmtPadProps, SmtPadProps>(true)\n","import { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { boolean, string, z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n}\n\nexport interface CircleSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n}\n\nexport type SolderPasteProps = RectSolderPasteProps | CircleSolderPasteProps\n\n// zod\n\nexport const rectSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  })\ntype InferredRectSolderPasteProps = z.input<typeof rectSolderPasteProps>\nexpectTypesMatch<InferredRectSolderPasteProps, RectSolderPasteProps>(true)\n\nexport const circleSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  })\ntype InferredCircleSolderPasteProps = z.input<typeof circleSolderPasteProps>\nexpectTypesMatch<InferredCircleSolderPasteProps, CircleSolderPasteProps>(true)\n\nexport const solderPasteProps = z.union([\n  circleSolderPasteProps,\n  rectSolderPasteProps,\n])\n\nexport type InferredSolderPasteProps = z.input<typeof solderPasteProps>\nexpectTypesMatch<InferredSolderPasteProps, SolderPasteProps>(true)\n","import { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface HoleProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  name?: string\n  diameter?: Distance\n  radius?: Distance\n}\n\nexport const holeProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    name: z.string().optional(),\n    diameter: distance.optional(),\n    radius: distance.optional(),\n  })\n  .transform((d) => ({\n    ...d,\n    diameter: d.diameter ?? 2 * d.radius!,\n    radius: d.radius ?? d.diameter! / 2,\n  }))\n\nexport type InferredHoleProps = z.input<typeof holeProps>\n\nexpectTypesMatch<HoleProps, InferredHoleProps>(true)\n","import { distance, route_hint_point } from \"circuit-json\"\nimport { z } from \"zod\"\nimport { point } from \"../common/point\"\n\nexport const portRef = z.union([\n  z.string(),\n  z.custom<{ getPortSelector: () => string }>((v) =>\n    Boolean(v.getPortSelector),\n  ),\n])\n\nconst baseTraceProps = z.object({\n  key: z.string().optional(),\n  thickness: distance.optional(),\n  schematicRouteHints: z.array(point).optional(),\n  pcbRouteHints: z.array(route_hint_point).optional(),\n  schDisplayLabel: z.string().optional(),\n})\n\nexport const traceProps = z.union([\n  baseTraceProps.extend({\n    path: z.array(portRef),\n  }),\n  baseTraceProps.extend({\n    from: portRef,\n    to: portRef,\n  }),\n])\n\nexport type TraceProps = z.input<typeof traceProps>\n","import { type LayerRef, layer_ref } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface FootprintProps {\n  /**\n   * The layer that the footprint is designed for. If you set this to \"top\"\n   * then it means the children were intended to represent the top layer. If\n   * the <chip /> with this footprint is moved to the bottom layer, then the\n   * components will be mirrored.\n   *\n   * Generally, you shouldn't set this except where it can help prevent\n   * confusion because you have a complex multi-layer footprint. Default is\n   * \"top\" and this is most intuitive.\n   */\n  originalLayer?: LayerRef\n}\n\nexport const footprintProps = z.object({\n  originalLayer: layer_ref.default(\"top\").optional(),\n})\n\nexport type FootprintPropsInput = z.input<typeof footprintProps>\ntype InferredFootprintProps = z.infer<typeof footprintProps>\nexpectTypesMatch<InferredFootprintProps, FootprintProps>(true)\n","import { z } from \"zod\"\nimport {\n  commonComponentProps,\n  lrPins,\n  lrPolarPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\n/** @deprecated use battery_capacity from circuit-json when circuit-json is updated */\nconst capacity = z\n  .number()\n  .or(z.string().endsWith(\"mAh\"))\n  .transform((v) => {\n    if (typeof v === \"string\") {\n      const valString = v.replace(\"mAh\", \"\")\n      const num = Number.parseFloat(valString)\n      if (Number.isNaN(num)) {\n        throw new Error(\"Invalid capacity\")\n      }\n      return num\n    }\n    return v\n  })\n  .describe(\"Battery capacity in mAh\")\n\nexport interface BatteryProps extends CommonComponentProps {\n  capacity?: number | string\n}\n\nexport const batteryProps = commonComponentProps.extend({\n  capacity: capacity.optional(),\n})\nexport const batteryPins = lrPolarPins\n\nexpectTypesMatch<BatteryProps, z.input<typeof batteryProps>>(true)\n","import { distance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface PinHeaderProps extends CommonComponentProps {\n  /**\n   * Number of pins in the header\n   */\n  pinCount: number\n\n  /**\n   * Distance between pins\n   */\n  pitch?: number | string\n\n  /**\n   * Whether the header is male or female\n   */\n  gender?: \"male\" | \"female\"\n\n  /**\n   * Whether to show pin labels in silkscreen\n   */\n  showSilkscreenPinLabels?: boolean\n\n  /**\n   * Whether the header has two rows of pins\n   */\n  doubleRow?: boolean\n\n  /**\n   * Diameter of the through-hole for each pin\n   */\n  holeDiameter?: number | string\n\n  /**\n   * Diameter of the plated area around each hole\n   */\n  platedDiameter?: number | string\n\n  /**\n   * Labels for each pin\n   */\n  pinLabels?: string[]\n\n  /**\n   * Direction the header is facing\n   */\n  facingDirection?: \"left\" | \"right\"\n}\n\nexport const pinHeaderProps = commonComponentProps.extend({\n  pinCount: z.number(),\n  pitch: distance.optional(),\n  gender: z.enum([\"male\", \"female\"]).optional().default(\"male\"),\n  showSilkscreenPinLabels: z.boolean().optional(),\n  doubleRow: z.boolean().optional(),\n  holeDiameter: distance.optional(),\n  platedDiameter: distance.optional(),\n  pinLabels: z.array(z.string()).optional(),\n  facingDirection: z.enum([\"left\", \"right\"]).optional(),\n})\n\ntype InferredPinHeaderProps = z.input<typeof pinHeaderProps>\nexpectTypesMatch<PinHeaderProps, InferredPinHeaderProps>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { distance } from \"lib/common/distance\"\nimport { rotation } from \"circuit-json\"\n\nexport interface NetAliasProps {\n  net?: string\n  schX?: number | string\n  schY?: number | string\n  schRotation?: number | string\n  anchorSide?: \"left\" | \"up\" | \"right\" | \"down\"\n}\n\nexport const netAliasProps = z.object({\n  net: z.string().optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  anchorSide: z.enum([\"left\", \"up\", \"right\", \"down\"]).optional(),\n})\n\ntype InferredNetAliasProps = z.input<typeof netAliasProps>\nexpectTypesMatch<NetAliasProps, InferredNetAliasProps>(true)\n","import { commonComponentProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const pushButtonProps = commonComponentProps.extend({})\nexport type PushButtonProps = z.input<typeof pushButtonProps>\n","import type { SubcircuitGroupProps } from \"./group\"\nimport { subcircuitGroupProps } from \"./group\"\nimport type { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type SubcircuitProps = SubcircuitGroupProps\n\nexport const subcircuitProps = subcircuitGroupProps\n\ntype InferredSubcircuitProps = z.input<typeof subcircuitProps>\nexpectTypesMatch<SubcircuitProps, InferredSubcircuitProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport const base_manual_edit_event = z.object({\n  edit_event_id: z.string(),\n  in_progress: z.boolean().optional(),\n  created_at: z.number(),\n})\n\nexport interface BaseManualEditEvent {\n  edit_event_id: string\n  in_progress?: boolean\n  created_at: number\n}\n\nexport type BaseManualEditEventInput = z.input<typeof base_manual_edit_event>\n\nexpectTypesMatch<BaseManualEditEvent, z.infer<typeof base_manual_edit_event>>(\n  true,\n)\n","import { z } from \"zod\"\nimport {\n  base_manual_edit_event,\n  type BaseManualEditEvent,\n} from \"./base_manual_edit_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const edit_component_location_event = base_manual_edit_event.extend({\n  pcb_edit_event_type: z.literal(\"edit_component_location\"),\n  pcb_component_id: z.string(),\n  original_center: z.object({ x: z.number(), y: z.number() }),\n  new_center: z.object({ x: z.number(), y: z.number() }),\n})\n\nexport interface EditComponentLocationEvent extends BaseManualEditEvent {\n  pcb_edit_event_type: \"edit_component_location\"\n  pcb_component_id: string\n  original_center: { x: number; y: number }\n  new_center: { x: number; y: number }\n}\n\nexport type EditComponentLocationEventInput = z.input<\n  typeof edit_component_location_event\n>\n\nexpectTypesMatch<\n  EditComponentLocationEvent,\n  z.infer<typeof edit_component_location_event>\n>(true)\n","import { z } from \"zod\"\nimport {\n  base_manual_edit_event,\n  type BaseManualEditEvent,\n} from \"./base_manual_edit_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { route_hint_point } from \"circuit-json\"\n\nexport const edit_trace_hint_event = base_manual_edit_event.extend({\n  pcb_edit_event_type: z.literal(\"edit_trace_hint\"),\n  pcb_port_id: z.string(),\n  pcb_trace_hint_id: z.string().optional(),\n  route: z.array(\n    z.object({ x: z.number(), y: z.number(), via: z.boolean().optional() }),\n  ),\n})\n\nexport interface EditTraceHintEvent extends BaseManualEditEvent {\n  pcb_edit_event_type: \"edit_trace_hint\"\n  pcb_port_id: string\n  pcb_trace_hint_id?: string\n  route: Array<{ x: number; y: number; via?: boolean }>\n}\n\nexport type EditTraceHintEventInput = z.input<typeof edit_trace_hint_event>\n\nexpectTypesMatch<EditTraceHintEvent, z.infer<typeof edit_trace_hint_event>>(\n  true,\n)\n","import { z } from \"zod\"\nimport { manual_pcb_placement } from \"./manual_pcb_position\"\nimport { manual_edit_event } from \"./manual_edit_event\"\nimport { manual_trace_hint } from \"./manual_trace_hint\"\n\nexport const manual_edit_file = z.object({\n  pcb_placements: z.array(manual_pcb_placement).optional(),\n  manual_trace_hints: z.array(manual_trace_hint).optional(),\n})\n","import { z } from \"zod\"\nimport { point } from \"circuit-json\"\n\nexport const manual_pcb_placement = z.object({\n  selector: z.string(),\n  relative_to: z\n    .string()\n    .optional()\n    .default(\"group_center\")\n    .describe(\"Can be a selector or 'group_center'\"),\n  center: point,\n})\n\nexport type ManualPcbPosition = z.infer<typeof manual_pcb_placement>\nexport type ManualPcbPositionInput = z.input<typeof manual_pcb_placement>\n","import { z } from \"zod\"\nimport {\n  edit_component_location_event,\n  type EditComponentLocationEvent,\n} from \"./manual-edit-events/edit_component_location_event\"\nimport {\n  edit_trace_hint_event,\n  type EditTraceHintEvent,\n} from \"./manual-edit-events/edit_trace_hint_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type ManualEditEvent = EditComponentLocationEvent | EditTraceHintEvent\n\nexport const manual_edit_event = z.union([\n  edit_component_location_event,\n  edit_trace_hint_event,\n])\n\nexport type ManualEditEventInput = z.input<typeof manual_edit_event>\n\nexpectTypesMatch<ManualEditEvent, z.infer<typeof manual_edit_event>>(true)\n","import { z } from \"zod\"\nimport { layer_ref, route_hint_point, type RouteHintPoint } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_trace_hint = z.object({\n  pcb_port_selector: z.string(),\n  offsets: z.array(route_hint_point),\n})\n\nexport interface ManualTraceHint {\n  pcb_port_selector: string\n  offsets: Array<RouteHintPoint>\n}\n\nexport type ManualTraceHintInput = z.input<typeof manual_trace_hint>\n\nexpectTypesMatch<ManualTraceHint, z.infer<typeof manual_trace_hint>>(true)\n"],"mappings":";AASA;AAAA,EAGE,YAAAA;AAAA,EACA;AAAA,EACA,aAAAC;AAAA,EACA,UAAAC;AAAA,EAGA,SAAAC;AAAA,EAGA,oBAAAC;AAAA,EAEA;AAAA,OACK;AAEP,SAAS,KAAAC,WAAS;;;ACdX,IAAM,mBAAmB,CAO9B,aAOS;AAAC;AAIZ,iBAQE,eAAe;AAEjB,iBAQE,iBAAiB;AAEnB,iBAOE,IAAI;AAEN,iBAOE,iCAAiC;;;ACjEnC,SAAS,SAAS;AACX,IAAM,YAAY,EAAE,KAAK,CAAC,MAAM,QAAQ,QAAQ,OAAO,CAAC;AASxD,IAAM,qBAAqB,EAAE,KAAK;AAAA,EACvC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAuD,IAAI;AAC3D,iBAAyE,IAAI;;;ACnB7E,SAAS,KAAAC,UAAS;AAGX,IAAM,YAAYC,GAAE,MAAMA,GAAE,OAAO,EAAE,GAAGA,GAAE,OAAO,CAAC,CAAC;AAG1D,iBAAuD,IAAI;;;ACN3D;AAAA,EAEE,YAAAC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,OACK;AAEP,SAAS,KAAAC,UAAS;;;ACRlB,SAAS,KAAAC,UAAS;;;ACAlB,SAAS,gBAAgB;AACzB,SAAS,KAAAC,UAAS;AAEX,IAAM,SAASA,GAAE,OAAO;AAAA,EAC7B,GAAG;AAAA,EACH,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ADHM,IAAM,iBAAiBC,GAAE,OAAO;AAAA,EACrC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AACrC,CAAC;AAcM,IAAM,eAAeA,GAAE,OAAO;AAAA,EACnC,gBAAgBA,GAAE,OAAO,EAAE,GAAG,cAAc,EAAE,SAAS;AAAA,EACvD,gBAAgB,OAAO,SAAS;AAAA,EAChC,MAAM,OAAO,SAAS;AACxB,CAAC;AAED,iBAA6D,IAAI;AAK1D,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQA,GAAE,OAAO;AACnB,CAAC;AAMM,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQA,GAAE,OAAO;AAAA,EACjB,QAAQA,GAAE,OAAO,EAAE,SAAS;AAC9B,CAAC;AAKM,IAAM,gBAAgB,aAAa,OAAO;AAAA,EAC/C,OAAOA,GAAE,OAAOA,GAAE,IAAI,CAAC;AACzB,CAAC;AAIM,IAAM,eAAeA,GAAE,MAAM;AAAA,EAClCA,GAAE,OAAO;AAAA,EACT;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAqD,IAAI;;;AE7DzD,SAAS,KAAAC,UAAS;AAoBX,IAAM,gBAAgBA,GAAE,OAAkB,CAAC,MAAM,IAAI;;;AHUrD,IAAM,iBAAiBC,GAAE,OAAO;AAAA,EACrC,MAAMC,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,OAAO,UAAU,SAAS;AAC5B,CAAC;AAED,iBAAyD,IAAI;AAEtD,IAAM,oBAAoBD,GAAE,OAAO;AAAA,EACxC,MAAMC,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,MAAMA,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,OAAO,UAAU,SAAS;AAAA,EAC1B,WAAW,cAAc,SAAS;AACpC,CAAC;AAGD,iBAA+D,IAAI;AAa5D,IAAM,gBAAgBD,GAAE,OAAO;AAAA,EACpC,qBAAqBA,GAAE,OAAO,eAAeA,GAAE,MAAMA,GAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAC7E,CAAC;AAED,iBAA+D,IAAI;AAW5D,IAAM,uBAAuB,kBACjC,MAAM,aAAa,EACnB,OAAO;AAAA,EACN,KAAKA,GAAE,IAAI,EAAE,SAAS;AAAA,EACtB,MAAMA,GAAE,OAAO;AAAA,EACf,UAAU,aAAa,SAAS;AAAA,EAChC,UAAUA,GAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,YAAYA,GAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAGH,iBAAqE,IAAI;AAElE,IAAM,SAAS,CAAC,QAAQ,QAAQ,QAAQ,OAAO;AAC/C,IAAM,cAAc;AAAA,EACzB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAEO,IAAM,uBAAuBC,UAAS,GAAGD,GAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;;;AIzG1E,SAAS,KAAAE,UAAS;AA2CX,IAAM,4BAA4BA,GAAE,OAAO;AAAA,EAChD,MAAMA,GAAE,MAAMA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC,CAAC;AAAA,EAC/C,WAAWA,GAAE,MAAM;AAAA,IACjBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,EAC3B,CAAC;AACH,CAAC;AAEM,IAAM,2BAA2BA,GAAE,OAAO;AAAA,EAC/C,UAAUA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,+BAA+B;AAAA,EACxE,SAASA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,8BAA8B;AAAA,EACtE,WAAWA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,gCAAgC;AAAA,EAC1E,YAAYA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,iCAAiC;AAAA,EAC5E,cAAcA,GAAE,OAAO,EAAE,SAAS;AAAA,EAClC,eAAeA,GAAE,OAAO,EAAE,SAAS;AAAA,EACnC,aAAaA,GAAE,OAAO,EAAE,SAAS;AAAA,EACjC,gBAAgBA,GAAE,OAAO,EAAE,SAAS;AAAA,EACpC,UAAU,0BAA0B,SAAS;AAAA,EAC7C,WAAW,0BAA0B,SAAS;AAAA,EAC9C,SAAS,0BAA0B,SAAS;AAAA,EAC5C,YAAY,0BAA0B,SAAS;AACjD,CAAC;AAED,iBAGE,IAAI;;;ACxEN,SAAS,YAAAC,iBAAgB;AAEzB,SAAS,KAAAC,UAAS;AAYX,IAAM,oBAAoBA,GAAE;AAAA,EACjCA,GAAE,OAAO;AAAA,IACP,YAAYC,UAAS,SAAS;AAAA,IAC9B,aAAaA,UAAS,SAAS;AAAA,IAC/B,WAAWA,UAAS,SAAS;AAAA,IAC7B,cAAcA,UAAS,SAAS;AAAA,EAClC,CAAC;AACH;AAEA,iBAAuE,IAAI;;;ACtB3E,SAAS,YAAAC,iBAAgB;;;ACDzB,SAAS,YAAAC,iBAAgB;AACzB,SAAS,KAAAC,UAAS;AAEX,IAAM,QAAQA,GAAE,OAAO;AAAA,EAC5B,GAAGD;AAAA,EACH,GAAGA;AACL,CAAC;;;ADDD,SAAS,KAAAE,WAAS;;;AEJlB,SAAS,cAAc;AAQvB,SAAS,KAAAC,WAAS;AAmCX,IAAM,mBAAmBA,IAAE,OAAO;AAAA,EACvC,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,aAAaA,IAAE,KAAK,CAAC,cAAc,cAAc,CAAC,EAAE,SAAS;AAAA,EAC7D,YAAYA,IAAE,KAAK,CAAC,OAAO,gBAAgB,CAAC,EAAE,SAAS;AAAA,EACvD,OAAOA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AACvD,CAAC;AAEM,IAAM,iBAAiBA,IAAE,MAAM;AAAA,EACpC;AAAA,EACAA,IAAE,QAAQ,kBAAkB;AAAA,EAC5BA,IAAE,QAAQ,YAAY;AAAA,EACtBA,IAAE,QAAQ,MAAM;AAAA,EAChBA,IAAE,QAAQ,YAAY;AAAA,EACtBA,IAAE,QAAQ,YAAY;AACxB,CAAC;AAgCM,IAAM,iBAAiB,kBAAkB,OAAO;AAAA,EACrD,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAUA,IAAE,IAAI,EAAE,SAAS;AAC7B,CAAC;AAEM,IAAM,uBAAuB,eAAe,OAAO;AAAA,EACxD,QAAQA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EACtD,aAAaA,IAAE,OAAuB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EAC5D,sBAAsBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC3C,iBAAiBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EACtC,mBAAmB,OAAO,SAAS;AAAA,EACnC,eAAe,OAAO,SAAS;AAAA,EAC/B,aAAaA,IAAE,OAAoB,CAAC,MAAM,cAAc,CAAC,EAAE,SAAS;AAAA,EACpE,eAAeA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EAC7D,YAAY,eAAe,SAAS;AACtC,CAAC;AAEM,IAAM,+BAA+B,qBAAqB,OAAO;AAAA,EACtE,YAAYA,IAAE,QAAQ,IAAI;AAC5B,CAAC;AAEM,IAAM,aAAaA,IAAE,mBAAmB,cAAc;AAAA,EAC3D,eAAe,OAAO,EAAE,YAAYA,IAAE,QAAQ,KAAK,EAAE,SAAS,EAAE,CAAC;AAAA,EACjE;AACF,CAAC;AAOD,iBAAyD,IAAI;AAC7D,iBAGE,IAAI;AAGN,iBAAiD,IAAI;;;AFlH9C,IAAM,aAAa,qBAAqB,OAAO;AAAA,EACpD,OAAOC,UAAS,SAAS;AAAA,EACzB,QAAQA,UAAS,SAAS;AAAA,EAC1B,SAASC,IAAE,MAAM,KAAK,EAAE,SAAS;AACnC,CAAC;AAGD,iBAAiD,IAAI;;;AGrBrD,SAAS,YAAAC,iBAAgB;AAezB,SAAS,KAAAC,WAAS;AAiBX,IAAM,gBAAgBA,IAAE;AAAA,EAC7BA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC;AAAA,EACxBA,IAAE,OAAO,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS,CAAC,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC;AACtE;AAEA,iBAA2D,IAAI;AAExD,IAAM,YAAY,qBAAqB,OAAO;AAAA,EACnD,wBAAwBA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAWA,IACR;AAAA,IACCA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC;AAAA,IACxBA,IAAE,OAAO,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS,CAAC;AAAA,EAC9C,EACC,SAAS;AAAA,EACZ,oBAAoB,yBAAyB,SAAS;AAAA,EACtD,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAeC,UAAS,SAAS;AAAA,EACjC,UAAUA,UAAS,SAAS;AAAA,EAC5B,WAAWA,UAAS,SAAS;AAC/B,CAAC;AAKM,IAAM,WAAW;AAGxB,iBAA+C,IAAI;;;AC5DnD,SAAS,YAAAC,iBAAgB;AAczB,SAAS,KAAAC,WAAS;AAaX,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,wBAAwBA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAWA,IACR,OAAOA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC,GAAGA,IAAE,OAAO,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC,CAAC,EACpE,SAAS;AAAA,EACZ,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAeC,UAAS,SAAS;AAAA,EACjC,UAAUA,UAAS,SAAS;AAAA,EAC5B,WAAWA,UAAS,SAAS;AAAA,EAC7B,cAAcD,IAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AAAA,EACjD,oBAAoB,yBAAyB,SAAS;AACxD,CAAC;AAGD,iBAAmD,IAAI;;;ACzCvD,SAAS,YAAAE,iBAAgB;AAKzB,SAAS,KAAAC,WAAS;AAsCX,IAAM,kBAAkBA,IAAE,mBAAmB,SAAS;AAAA,EAC3D,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,QAAQ;AAAA,IACzB,cAAcC;AAAA,IACd,eAAeA;AAAA,IACf,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMD,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,MAAM;AAAA,IACvB,YAAYC;AAAA,IACZ,aAAaA;AAAA,IACb,YAAYA;AAAA,IACZ,aAAaA;AAAA,IACb,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMD,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,MAAM;AAAA,IACvB,YAAYC;AAAA,IACZ,aAAaA;AAAA,IACb,YAAYA;AAAA,IACZ,aAAaA;AAAA,IACb,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AACH,CAAC;AAGD,iBAA2D,IAAI;;;ACxE/D,SAAS,kBAAkB;AAO3B,SAAS,KAAAC,WAAS;AAUX,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AAAA,EAEA,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAUA,IAAE,OAAO,EAAE,SAAS;AAAA,EAE9B,aAAaA,IAAE,OAAO,EAAE,SAAS;AAAA,EACjC,YAAYA,IAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AACM,IAAM,eAAe;AAG5B,iBAAuD,IAAI;;;AC7B3D,SAAS,cAAAC,mBAAkB;AAapB,IAAM,qBAAqB,qBAAqB,OAAO;AAAA,EAC5D,eAAeC;AACjB,CAAC;AACM,IAAM,oBAAoB;AAGjC,iBAAiE,IAAI;;;ACnBrE,SAAS,WAAW,mBAAmB;AAOvC,SAAS,KAAAC,WAAS;AAUX,IAAM,eAAe,qBAAqB,OAAO;AAAA,EACtD;AAAA,EACA,iBAAiB;AAAA,EACjB,YAAYA,IAAE,KAAK,CAAC,QAAQ,MAAM,CAAC,EAAE,SAAS;AAChD,CAAC;AACM,IAAM,cAAc;AAG3B,iBAAqD,IAAI;;;ACzBzD,SAAS,eAAAC,oBAAmB;AAO5B,SAAS,KAAAC,WAAS;AAaX,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD,aAAAC;AAAA,EAEA,WAAWD,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAE/C,eAAeA,IAAE,OAAO,EAAE,SAAS;AAAA,EACnC,cAAcA,IAAE,OAAO,EAAE,SAAS;AAAA,EAElC,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAUA,IAAE,OAAO,EAAE,SAAS;AAChC,CAAC;AACM,IAAM,gBAAgB;AAE7B,iBAAiE,IAAI;;;ACjCrE,SAAS,KAAAE,WAAS;AAOX,IAAM,WAAWC,IAAE,OAAO;AAAA,EAC/B,MAAMA,IAAE,OAAO;AACjB,CAAC;AAGD,iBAA6C,IAAI;;;ACXjD,SAAS,KAAAC,WAAS;AAQX,IAAM,yBAAyBA,IAAE,OAAO;AAAA,EAC7C,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,SAASA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC9B,SAASA,IAAE,QAAQ,EAAE,SAAS;AAChC,CAAC;AAMD,iBAAyE,IAAI;;;ACnB7E,OAAkB;AAIlB,SAAS,YAAAC,WAAU,UAAAC,eAAc;;;ACDjC,SAAS,KAAAC,WAAS;AAkFX,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOC;AAAA,EACP,MAAMD,IAAE,OAAO;AAAA,EACf,OAAOA,IAAE,OAAO;AAAA,EAEhB,YAAYA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgBA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOC;AAAA,EACP,KAAKD,IAAE,OAAO;AAAA,EACd,QAAQA,IAAE,OAAO;AAAA,EAEjB,YAAYA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgBA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAKA,IAAE,MAAMA,IAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAKA,IAAE,MAAMA,IAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,kBAAkBA,IAAE,MAAM;AAAA,EACrC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAmE,IAAI;;;ACnIvE,SAAS,KAAAE,WAAS;AAoCX,IAAM,kBAAkB,eAC5B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOC,IAAE,QAAQ,MAAM;AAAA,EACvB,OAAOC;AAAA,EACP,QAAQA;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA2D,IAAI;AAExD,IAAM,yBAAyB,eACnC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOD,IAAE,QAAQ,cAAc;AAAA,EAC/B,OAAOC;AAAA,EACP,QAAQA;AAAA,EACR,aAAaD,IAAE,OAAO;AAAA,EACtB,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAAyE,IAAI;AAEtE,IAAM,oBAAoB,eAC9B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOA,IAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQC;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA+D,IAAI;AAE5D,IAAM,cAAcD,IAAE,MAAM;AAAA,EACjC;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAmD,IAAI;;;AC/EvD,SAA0B,KAAAE,WAAS;AAoB5B,IAAM,uBAAuB,eACjC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOC,IAAE,QAAQ,MAAM;AAAA,EACvB,OAAOC;AAAA,EACP,QAAQA;AACV,CAAC;AAEH,iBAAqE,IAAI;AAElE,IAAM,yBAAyB,eACnC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOD,IAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQC;AACV,CAAC;AAEH,iBAAyE,IAAI;AAEtE,IAAM,mBAAmBD,IAAE,MAAM;AAAA,EACtC;AAAA,EACA;AACF,CAAC;AAGD,iBAA6D,IAAI;;;AC/CjE,SAAS,KAAAE,WAAS;AAWX,IAAM,YAAY,eACtB,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,MAAMC,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAUC,UAAS,SAAS;AAAA,EAC5B,QAAQA,UAAS,SAAS;AAC5B,CAAC,EACA,UAAU,CAAC,OAAO;AAAA,EACjB,GAAG;AAAA,EACH,UAAU,EAAE,YAAY,IAAI,EAAE;AAAA,EAC9B,QAAQ,EAAE,UAAU,EAAE,WAAY;AACpC,EAAE;AAIJ,iBAA+C,IAAI;;;AC1BnD,SAAS,YAAAC,YAAU,wBAAwB;AAC3C,SAAS,KAAAC,WAAS;AAGX,IAAM,UAAUC,IAAE,MAAM;AAAA,EAC7BA,IAAE,OAAO;AAAA,EACTA,IAAE;AAAA,IAA0C,CAAC,MAC3C,QAAQ,EAAE,eAAe;AAAA,EAC3B;AACF,CAAC;AAED,IAAM,iBAAiBA,IAAE,OAAO;AAAA,EAC9B,KAAKA,IAAE,OAAO,EAAE,SAAS;AAAA,EACzB,WAAWC,WAAS,SAAS;AAAA,EAC7B,qBAAqBD,IAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EAC7C,eAAeA,IAAE,MAAM,gBAAgB,EAAE,SAAS;AAAA,EAClD,iBAAiBA,IAAE,OAAO,EAAE,SAAS;AACvC,CAAC;AAEM,IAAM,aAAaA,IAAE,MAAM;AAAA,EAChC,eAAe,OAAO;AAAA,IACpB,MAAMA,IAAE,MAAM,OAAO;AAAA,EACvB,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,MAAM;AAAA,IACN,IAAI;AAAA,EACN,CAAC;AACH,CAAC;;;AC3BD,SAAwB,aAAAE,kBAAiB;AAEzC,SAAS,KAAAC,WAAS;AAgBX,IAAM,iBAAiBA,IAAE,OAAO;AAAA,EACrC,eAAeC,WAAU,QAAQ,KAAK,EAAE,SAAS;AACnD,CAAC;AAID,iBAAyD,IAAI;;;ACxB7D,SAAS,KAAAC,WAAS;AAUlB,IAAM,WAAWC,IACd,OAAO,EACP,GAAGA,IAAE,OAAO,EAAE,SAAS,KAAK,CAAC,EAC7B,UAAU,CAAC,MAAM;AAChB,MAAI,OAAO,MAAM,UAAU;AACzB,UAAM,YAAY,EAAE,QAAQ,OAAO,EAAE;AACrC,UAAM,MAAM,OAAO,WAAW,SAAS;AACvC,QAAI,OAAO,MAAM,GAAG,GAAG;AACrB,YAAM,IAAI,MAAM,kBAAkB;AAAA,IACpC;AACA,WAAO;AAAA,EACT;AACA,SAAO;AACT,CAAC,EACA,SAAS,yBAAyB;AAM9B,IAAM,eAAe,qBAAqB,OAAO;AAAA,EACtD,UAAU,SAAS,SAAS;AAC9B,CAAC;AACM,IAAM,cAAc;AAE3B,iBAA6D,IAAI;;;ACnCjE,SAAS,YAAAC,kBAAgB;AAMzB,SAAS,KAAAC,WAAS;AAiDX,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD,UAAUA,IAAE,OAAO;AAAA,EACnB,OAAOC,WAAS,SAAS;AAAA,EACzB,QAAQD,IAAE,KAAK,CAAC,QAAQ,QAAQ,CAAC,EAAE,SAAS,EAAE,QAAQ,MAAM;AAAA,EAC5D,yBAAyBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC9C,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,cAAcC,WAAS,SAAS;AAAA,EAChC,gBAAgBA,WAAS,SAAS;AAAA,EAClC,WAAWD,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACxC,iBAAiBA,IAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AACtD,CAAC;AAGD,iBAAyD,IAAI;;;ACpE7D,SAAS,KAAAE,WAAS;AAGlB,SAAS,YAAAC,iBAAgB;AAUlB,IAAM,gBAAgBC,IAAE,OAAO;AAAA,EACpC,KAAKA,IAAE,OAAO,EAAE,SAAS;AAAA,EACzB,MAAMC,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAaF,UAAS,SAAS;AAAA,EAC/B,YAAYC,IAAE,KAAK,CAAC,QAAQ,MAAM,SAAS,MAAM,CAAC,EAAE,SAAS;AAC/D,CAAC;AAGD,iBAAuD,IAAI;;;ACrB3D,OAAkB;AAEX,IAAM,kBAAkB,qBAAqB,OAAO,CAAC,CAAC;;;ACItD,IAAM,kBAAkB;AAG/B,iBAA2D,IAAI;;;ACT/D,SAAS,KAAAE,WAAS;AAEX,IAAM,yBAAyBA,IAAE,OAAO;AAAA,EAC7C,eAAeA,IAAE,OAAO;AAAA,EACxB,aAAaA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAClC,YAAYA,IAAE,OAAO;AACvB,CAAC;AAUD;AAAA,EACE;AACF;;;ACnBA,SAAS,KAAAC,WAAS;AAOX,IAAM,gCAAgC,uBAAuB,OAAO;AAAA,EACzE,qBAAqBC,IAAE,QAAQ,yBAAyB;AAAA,EACxD,kBAAkBA,IAAE,OAAO;AAAA,EAC3B,iBAAiBA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AAAA,EAC1D,YAAYA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AACvD,CAAC;AAaD,iBAGE,IAAI;;;AC5BN,SAAS,KAAAC,WAAS;AAMlB,OAAiC;AAE1B,IAAM,wBAAwB,uBAAuB,OAAO;AAAA,EACjE,qBAAqBC,IAAE,QAAQ,iBAAiB;AAAA,EAChD,aAAaA,IAAE,OAAO;AAAA,EACtB,mBAAmBA,IAAE,OAAO,EAAE,SAAS;AAAA,EACvC,OAAOA,IAAE;AAAA,IACPA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,GAAG,KAAKA,IAAE,QAAQ,EAAE,SAAS,EAAE,CAAC;AAAA,EACxE;AACF,CAAC;AAWD;AAAA,EACE;AACF;;;AC5BA,SAAS,KAAAC,WAAS;;;ACAlB,SAAS,KAAAC,WAAS;AAClB,SAAS,SAAAC,cAAa;AAEf,IAAM,uBAAuBD,IAAE,OAAO;AAAA,EAC3C,UAAUA,IAAE,OAAO;AAAA,EACnB,aAAaA,IACV,OAAO,EACP,SAAS,EACT,QAAQ,cAAc,EACtB,SAAS,qCAAqC;AAAA,EACjD,QAAQC;AACV,CAAC;;;ACXD,SAAS,KAAAC,WAAS;AAaX,IAAM,oBAAoBC,IAAE,MAAM;AAAA,EACvC;AAAA,EACA;AACF,CAAC;AAID,iBAAqE,IAAI;;;ACpBzE,SAAS,KAAAC,WAAS;AAClB,SAAoB,oBAAAC,yBAA6C;AAG1D,IAAM,oBAAoBC,IAAE,OAAO;AAAA,EACxC,mBAAmBA,IAAE,OAAO;AAAA,EAC5B,SAASA,IAAE,MAAMC,iBAAgB;AACnC,CAAC;AASD,iBAAqE,IAAI;;;AHXlE,IAAM,mBAAmBC,IAAE,OAAO;AAAA,EACvC,gBAAgBA,IAAE,MAAM,oBAAoB,EAAE,SAAS;AAAA,EACvD,oBAAoBA,IAAE,MAAM,iBAAiB,EAAE,SAAS;AAC1D,CAAC;;;ArCiEM,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AACF,CAAC;AACM,IAAM,eAAe;AAGrB,IAAM,aAAa,qBAAqB,OAAO,CAAC,CAAC;AACjD,IAAM,YAAY;AAGlB,IAAM,WAAW,qBAAqB,OAAO;AAAA,EAClD,OAAOC,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AACM,IAAM,UAAU;AAGhB,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,OAAOA,IAAE,QAAQ,QAAQ;AAAA,EACzB,YAAYA,IAAE,KAAK,CAAC,MAAM,CAAC,EAAE,QAAQ,MAAM;AAAA,EAC3C,kBAAkBA,IAAE,QAAQ,EAAE,QAAQ,KAAK;AAC7C,CAAC;AAGM,IAAMC,wBAAuBC,WAAS,GAAGF,IAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;AAEnE,IAAM,WAAW,kBAAkB,OAAO;AAAA,EAC/C,WAAWG;AAAA,EACX,SAASA;AAAA,EACT,cAAcD;AAAA,EACd,eAAeA;AACjB,CAAC;AAGM,IAAM,kBAAkBF,IAAE,MAAM;AAAA,EACrC,eAAe,KAAK,EAAE,aAAa,KAAK,CAAC,EAAE,OAAO;AAAA,IAChD,OAAOA,IAAE,QAAQ,QAAQ;AAAA,IACzB,QAAQE;AAAA,EACV,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,OAAOF,IAAE,QAAQ,MAAM;AAAA,IACvB,OAAOE;AAAA,IACP,QAAQA;AAAA,EACV,CAAC;AACH,CAAC;AAGM,IAAM,oBAAoBF,IAAE,OAAO;AAAA,EACxC,MAAME;AAAA,EACN,MAAMA;AAAA,EACN,OAAOA;AAAA,EACP,QAAQA;AACV,CAAC;AAGM,IAAM,qBAAqBF,IAAE,OAAO;AAAA,EACzC,MAAME;AAAA,EACN,MAAMA;AAAA,EACN,MAAMF,IAAE,OAAO;AACjB,CAAC;AAGM,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EACzC,IAAIE;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AACN,CAAC;AAGM,IAAM,qBAAqBF,IAAE,OAAO;AAAA,EACzC,QAAQA,IAAE,MAAMI,MAAK;AAAA,EACrB,UAAUJ,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAC9C,WAAWA,IAAE,KAAK,CAAC,OAAO,MAAM,CAAC,EAAE,SAAS;AAC9C,CAAC;AAGM,IAAM,iBAAiB;AAGvB,IAAM,mBAAmB,qBAAqB,OAAO;AAAA,EAC1D;AACF,CAAC;AAGM,IAAM,YAAY,kBAAkB,OAAO;AAAA,EAChD,MAAMA,IAAE,OAAO;AAAA,EACf,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,SAASA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACtC;AACF,CAAC;AAGM,IAAM,sBAAsB,eAAe,OAAO;AAAA,EACvD,MAAMA,IAAE,OAAO;AAAA,EACf,iBAAiBA,IACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAMA,IAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAUK,QAAO,SAAS;AAC5B,CAAC;AAGM,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAOL,IAAE,MAAMM,iBAAgB;AAAA,EAC/B,aAAaD,QAAO,SAAS;AAC/B,CAAC;AAGI,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,aAAaH;AAAA,EACb,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AACN,CAAC;AAGI,IAAM,sBAAsB,eAChC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAUF,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAaE,WAAS,SAAS;AAAA,EAC/B,OAAOA;AAAA,EACP,QAAQA;AACV,CAAC;AAGI,IAAM,wBAAwB,eAClC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAUF,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAaE,WAAS,SAAS;AAAA,EAC/B,QAAQA;AACV,CAAC;AAGI,IAAM,sBAAsBF,IAAE,OAAO;AAAA,EAC1C,GAAGE;AAAA,EACH,GAAGA;AAAA,EACH,KAAKF,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC1B,SAASG,WAAU,SAAS;AAC9B,CAAC;AAEM,IAAM,iBAAiBH,IAAE,OAAO;AAAA,EACrC,KAAKA,IACF,OAAO,EACP,SAAS,EACT;AAAA,IACC;AAAA,EACF;AAAA,EACF,OAAOA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,QAAQM,kBAAiB,GAAG,mBAAmB,EAAE,SAAS;AAAA,EAC1D,SAASN,IACN,MAAMM,iBAAgB,EACtB,GAAGN,IAAE,MAAM,mBAAmB,CAAC,EAC/B,SAAS;AAAA,EACZ,YAAYA,IAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAIM,IAAM,gBAAgBA,IAAE,OAAO;AAAA,EACpC,OAAOA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,WAAWE,WAAS,SAAS;AAAA,EAC7B,OAAOF,IAAE,MAAMM,iBAAgB;AACjC,CAAC;AAGM,IAAM,2BAA2B,eAAe,OAAO;AAAA,EAC5D,MAAMN,IAAE,OAAO;AAAA,EACf,iBAAiBA,IACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAMA,IAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAUK,QAAO,SAAS;AAAA,EAC1B,OAAOL,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AAGM,IAAM,2BAA2B,eACrC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAOA,IAAE,MAAMM,iBAAgB;AAAA,EAC/B,aAAaD,QAAO,SAAS;AAAA,EAC7B,OAAOL,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;","names":["distance","layer_ref","length","point","route_hint_point","z","z","z","distance","z","z","z","z","z","z","distance","z","distance","z","distance","distance","distance","z","z","z","distance","z","distance","z","distance","distance","z","distance","distance","z","distance","z","resistance","resistance","z","capacitance","z","capacitance","z","z","z","distance","length","z","distance","z","z","distance","z","z","distance","z","z","distance","distance","z","z","distance","layer_ref","z","layer_ref","z","z","distance","z","distance","z","rotation","z","distance","z","z","z","z","z","z","z","point","z","z","z","route_hint_point","z","route_hint_point","z","z","distanceOrMultiplier","distance","layer_ref","point","length","route_hint_point"]}
+{"version":3,"sources":["../lib/index.ts","../lib/typecheck.ts","../lib/common/direction.ts","../lib/common/portHints.ts","../lib/common/layout.ts","../lib/common/cadModel.ts","../lib/common/point3.ts","../lib/common/footprintProp.ts","../lib/common/schematicPinDefinitions.ts","../lib/common/schematicPinStyle.ts","../lib/components/board.ts","../lib/common/point.ts","../lib/components/group.ts","../lib/components/chip.ts","../lib/components/jumper.ts","../lib/components/platedhole.ts","../lib/components/resistor.ts","../lib/components/potentiometer.ts","../lib/components/crystal.ts","../lib/components/capacitor.ts","../lib/components/net.ts","../lib/components/constrainedlayout.ts","../lib/common/distance.ts","../lib/components/constraint.ts","../lib/components/smtpad.ts","../lib/components/solderpaste.ts","../lib/components/hole.ts","../lib/components/trace.ts","../lib/components/footprint.ts","../lib/components/battery.ts","../lib/components/pin-header.ts","../lib/components/netalias.ts","../lib/components/push-button.ts","../lib/components/subcircuit.ts","../lib/manual-edits/manual-edit-events/base_manual_edit_event.ts","../lib/manual-edits/manual-edit-events/edit_pcb_component_location_event.ts","../lib/manual-edits/manual-edit-events/edit_trace_hint_event.ts","../lib/manual-edits/manual-edit-events/edit_schematic_component_location_event.ts","../lib/manual-edits/manual_edit_file.ts","../lib/manual-edits/manual_pcb_placement.ts","../lib/manual-edits/manual_edit_event.ts","../lib/manual-edits/manual_trace_hint.ts","../lib/manual-edits/manual_schematic_placement.ts"],"sourcesContent":["/**\n * THINKING ABOUT ADDING SOMETHING TO THIS FILE?\n *\n * THINK AGAIN!\n *\n * This file is TOO BIG! Create files using the pattern in the surrounding\n * directories, then export from this file.\n */\nimport type { LayoutBuilder } from \"@tscircuit/layout\"\nimport {\n  type AnySoupElementInput,\n  capacitance,\n  distance,\n  inductance,\n  layer_ref,\n  length,\n  type PCBPlatedHoleInput,\n  type PCBSMTPadInput,\n  point,\n  resistance,\n  rotation,\n  route_hint_point,\n  supplier_name,\n  voltage,\n} from \"circuit-json\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\nimport { direction } from \"./common/direction\"\nimport { portHints } from \"./common/portHints\"\nimport {\n  commonComponentProps,\n  commonLayoutProps,\n  lrPins,\n  lrPolarPins,\n  pcbLayoutProps,\n} from \"./common/layout\"\nimport { explicitPinSideDefinition } from \"./common/schematicPinDefinitions\"\n\nexport * from \"./common/direction\"\nexport * from \"./common/portHints\"\nexport * from \"./common/layout\"\nexport * from \"./common/point3\"\nexport * from \"./common/portHints\"\nexport * from \"./common/footprintProp\"\nexport * from \"./common/schematicPinDefinitions\"\nexport * from \"./common/schematicPinStyle\"\nexport * from \"./common/cadModel\"\n\nexport * from \"./components/board\"\nexport * from \"./components/chip\"\nexport * from \"./components/jumper\"\nexport * from \"./components/platedhole\"\n\nexport * from \"./components/resistor\"\nexport * from \"./components/potentiometer\"\nexport * from \"./components/crystal\"\nexport * from \"./components/capacitor\"\nexport * from \"./components/group\"\nexport * from \"./components/net\"\nexport * from \"./components/constrainedlayout\"\nexport * from \"./components/constraint\"\nexport * from \"./components/smtpad\"\nexport * from \"./components/solderpaste\"\nexport * from \"./components/hole\"\nexport * from \"./components/trace\"\nexport * from \"./components/footprint\"\nexport * from \"./components/battery\"\nexport * from \"./components/pin-header\"\nexport * from \"./components/netalias\"\nexport * from \"./components/push-button\"\nexport * from \"./components/subcircuit\"\nexport * from \"./manual-edits\"\n\nexport const inductorProps = commonComponentProps.extend({\n  inductance,\n})\nexport const inductorPins = lrPins\nexport type InductorProps = z.input<typeof inductorProps>\n\nexport const diodeProps = commonComponentProps.extend({})\nexport const diodePins = lrPolarPins\nexport type DiodeProps = z.input<typeof diodeProps>\n\nexport const ledProps = commonComponentProps.extend({\n  color: z.string().optional(),\n})\nexport const ledPins = lrPolarPins\nexport type LedProps = z.input<typeof ledProps>\n\nexport const switchProps = commonComponentProps.extend({\n  ftype: z.literal(\"switch\"),\n  switchType: z.enum([\"spst\"]).default(\"spst\"),\n  isNormallyClosed: z.boolean().default(false),\n})\nexport type SwitchProps = z.input<typeof switchProps>\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n\nexport const viaProps = commonLayoutProps.extend({\n  fromLayer: layer_ref,\n  toLayer: layer_ref,\n  holeDiameter: distance,\n  outerDiameter: distance,\n})\nexport type ViaProps = z.input<typeof viaProps>\n\nexport const pcbKeepoutProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true }).extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  }),\n  pcbLayoutProps.extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  }),\n])\nexport type PcbKeepoutProps = z.input<typeof pcbKeepoutProps>\n\nexport const schematicBoxProps = z.object({\n  schX: distance,\n  schY: distance,\n  width: distance,\n  height: distance,\n})\nexport type SchematicBoxProps = z.input<typeof schematicBoxProps>\n\nexport const schematicTextProps = z.object({\n  schX: distance,\n  schY: distance,\n  text: z.string(),\n})\nexport type SchematicTextProps = z.input<typeof schematicTextProps>\n\nexport const schematicLineProps = z.object({\n  x1: distance,\n  y1: distance,\n  x2: distance,\n  y2: distance,\n})\nexport type SchematicLineProps = z.input<typeof schematicLineProps>\n\nexport const schematicPathProps = z.object({\n  points: z.array(point),\n  isFilled: z.boolean().optional().default(false),\n  fillColor: z.enum([\"red\", \"blue\"]).optional(),\n})\nexport type SchematicPathProps = z.input<typeof schematicPathProps>\n\nexport const componentProps = commonComponentProps\nexport type ComponentProps = z.input<typeof componentProps>\n\nexport const powerSourceProps = commonComponentProps.extend({\n  voltage,\n})\nexport type PowerSourceProps = z.input<typeof powerSourceProps>\n\nexport const portProps = commonLayoutProps.extend({\n  name: z.string(),\n  pinNumber: z.number().optional(),\n  aliases: z.array(z.string()).optional(),\n  direction: direction,\n})\nexport type PortProps = z.input<typeof portProps>\n\nexport const silkscreenTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n})\nexport type SilkscreenTextProps = z.input<typeof silkscreenTextProps>\n\nexport const silkscreenPathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n  })\nexport type SilkscreenPathProps = z.input<typeof silkscreenPathProps>\n\nexport const silkscreenLineProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    strokeWidth: distance,\n    x1: distance,\n    y1: distance,\n    x2: distance,\n    y2: distance,\n  })\nexport type SilkscreenLineProps = z.input<typeof silkscreenLineProps>\n\nexport const silkscreenRectProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    width: distance,\n    height: distance,\n  })\nexport type SilkscreenRectProps = z.input<typeof silkscreenRectProps>\n\nexport const silkscreenCircleProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    radius: distance,\n  })\nexport type SilkscreenCircleProps = z.input<typeof silkscreenCircleProps>\n\nexport const routeHintPointProps = z.object({\n  x: distance,\n  y: distance,\n  via: z.boolean().optional(),\n  toLayer: layer_ref.optional(),\n})\n\nexport const traceHintProps = z.object({\n  for: z\n    .string()\n    .optional()\n    .describe(\n      \"Selector for the port you're targeting, not required if you're inside a trace\",\n    ),\n  order: z.number().optional(),\n  offset: route_hint_point.or(routeHintPointProps).optional(),\n  offsets: z\n    .array(route_hint_point)\n    .or(z.array(routeHintPointProps))\n    .optional(),\n  traceWidth: z.number().optional(),\n})\n\nexport type TraceHintProps = z.input<typeof traceHintProps>\n\nexport const pcbTraceProps = z.object({\n  layer: z.string().optional(),\n  thickness: distance.optional(),\n  route: z.array(route_hint_point),\n})\nexport type PcbTraceProps = z.input<typeof pcbTraceProps>\n\nexport const fabricationNoteTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n  color: z.string().optional(),\n})\nexport type FabricationNoteTextProps = z.input<typeof fabricationNoteTextProps>\n\nexport const fabricationNotePathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n    color: z.string().optional(),\n  })\nexport type FabricationNotePathProps = z.input<typeof fabricationNotePathProps>\n","import type { TypeEqual } from \"ts-expect\"\n\ntype IsNever<T> = [T] extends [never] ? true : false\n\ntype GetMismatchedProps<T1, T2> = {\n  [K in keyof T1 & keyof T2]: T1[K] extends T2[K]\n    ? T2[K] extends T1[K]\n      ? never\n      : K\n    : K\n}[keyof T1 & keyof T2]\n\nexport const expectTypesMatch = <\n  const T1,\n  const T2,\n  T3 = Exclude<keyof T1, keyof T2>,\n  T4 = Exclude<keyof T2, keyof T1>,\n  T5 = GetMismatchedProps<T1, T2>,\n>(\n  shouldBe: IsNever<T3> extends true\n    ? IsNever<T4> extends true\n      ? IsNever<T5> extends true\n        ? TypeEqual<T1, T2>\n        : `property ${T5 extends string ? T5 : \"\"} has mismatched types`\n      : `extra props ${T4 extends string ? T4 : \"\"}`\n    : `missing props ${T3 extends string ? T3 : \"\"}`,\n): void => {}\n\n// ------ TESTS -------\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: number\n    b: number\n  }\n>(\"extra props b\")\n\nexpectTypesMatch<\n  {\n    a: number\n    b: number\n  },\n  {\n    a: number\n  }\n>(\"missing props b\")\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: number\n  }\n>(true)\n\nexpectTypesMatch<\n  {\n    a: number\n  },\n  {\n    a: string\n  }\n>(\"property a has mismatched types\")\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nexport const direction = z.enum([\"up\", \"down\", \"left\", \"right\"])\nexport type Direction = \"up\" | \"down\" | \"left\" | \"right\"\n\nexport type DirectionAlongEdge =\n  | \"top-to-bottom\"\n  | \"left-to-right\"\n  | \"bottom-to-top\"\n  | \"right-to-left\"\n\nexport const directionAlongEdge = z.enum([\n  \"top-to-bottom\",\n  \"left-to-right\",\n  \"bottom-to-top\",\n  \"right-to-left\",\n])\n\nexpectTypesMatch<Direction, z.infer<typeof direction>>(true)\nexpectTypesMatch<DirectionAlongEdge, z.infer<typeof directionAlongEdge>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const portHints = z.array(z.string().or(z.number()))\nexport type PortHints = (string | number)[]\n\nexpectTypesMatch<PortHints, z.infer<typeof portHints>>(true)\n","import {\n  type LayerRefInput,\n  distance,\n  layer_ref,\n  rotation,\n  supplier_name,\n} from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport { type CadModelProp, cadModelProp } from \"./cadModel\"\nimport { type Footprint, footprintProp } from \"./footprintProp\"\n\nexport interface PcbLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n  layer?: LayerRefInput\n}\n\nexport interface CommonLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n\n  schX?: string | number\n  schY?: string | number\n  schRotation?: string | number\n\n  layer?: LayerRefInput\n  footprint?: Footprint\n}\n\nexport const pcbLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n})\ntype InferredPcbLayoutProps = z.input<typeof pcbLayoutProps>\nexpectTypesMatch<PcbLayoutProps, InferredPcbLayoutProps>(true)\n\nexport const commonLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n  footprint: footprintProp.optional(),\n})\n\ntype InferredCommonLayoutProps = z.input<typeof commonLayoutProps>\nexpectTypesMatch<CommonLayoutProps, InferredCommonLayoutProps>(true)\n\nexport type SupplierName =\n  | \"jlcpcb\"\n  | \"macrofab\"\n  | \"pcbway\"\n  | \"digikey\"\n  | \"mouser\"\n  | \"lcsc\"\nexport type SupplierPartNumbers = { [k in SupplierName]?: string[] }\nexport interface SupplierProps {\n  supplierPartNumbers?: SupplierPartNumbers\n}\nexport const supplierProps = z.object({\n  supplierPartNumbers: z.record(supplier_name, z.array(z.string())).optional(),\n})\n\nexpectTypesMatch<SupplierProps, z.input<typeof supplierProps>>(true)\n\nexport interface CommonComponentProps extends CommonLayoutProps {\n  key?: any\n  name: string\n  supplierPartNumbers?: SupplierPartNumbers\n  cadModel?: CadModelProp\n  children?: any\n  symbolName?: string\n}\n\nexport const commonComponentProps = commonLayoutProps\n  .merge(supplierProps)\n  .extend({\n    key: z.any().optional(),\n    name: z.string(),\n    cadModel: cadModelProp.optional(),\n    children: z.any().optional(),\n    symbolName: z.string().optional(),\n  })\n\ntype InferredCommonComponentProps = z.input<typeof commonComponentProps>\nexpectTypesMatch<CommonComponentProps, InferredCommonComponentProps>(true)\n\nexport const lrPins = [\"pin1\", \"left\", \"pin2\", \"right\"] as const\nexport const lrPolarPins = [\n  \"pin1\",\n  \"left\",\n  \"anode\",\n  \"pos\",\n  \"pin2\",\n  \"right\",\n  \"cathode\",\n  \"neg\",\n] as const\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n","import { z } from \"zod\"\nimport { point3 } from \"./point3\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const rotationPoint3 = z.object({\n  x: z.union([z.number(), z.string()]),\n  y: z.union([z.number(), z.string()]),\n  z: z.union([z.number(), z.string()]),\n})\n\nexport interface CadModelBase {\n  rotationOffset?:\n    | number\n    | { x: number | string; y: number | string; z: number | string }\n  positionOffset?: {\n    x: number | string\n    y: number | string\n    z: number | string\n  }\n  size?: { x: number | string; y: number | string; z: number | string }\n}\n\nexport const cadModelBase = z.object({\n  rotationOffset: z.number().or(rotationPoint3).optional(),\n  positionOffset: point3.optional(),\n  size: point3.optional(),\n})\n\nexpectTypesMatch<CadModelBase, z.input<typeof cadModelBase>>(true)\n\nexport interface CadModelStl extends CadModelBase {\n  stlUrl: string\n}\nexport const cadModelStl = cadModelBase.extend({\n  stlUrl: z.string(),\n})\n\nexport interface CadModelObj extends CadModelBase {\n  objUrl: string\n  mtlUrl?: string\n}\nexport const cadModelObj = cadModelBase.extend({\n  objUrl: z.string(),\n  mtlUrl: z.string().optional(),\n})\n\nexport interface CadModelJscad extends CadModelBase {\n  jscad: Record<string, any>\n}\nexport const cadModelJscad = cadModelBase.extend({\n  jscad: z.record(z.any()),\n})\n\nexport type CadModelProp = string | CadModelStl | CadModelObj | CadModelJscad\n\nexport const cadModelProp = z.union([\n  z.string(),\n  cadModelStl,\n  cadModelObj,\n  cadModelJscad,\n])\n\ntype InferredCadModelProp = z.input<typeof cadModelProp>\nexpectTypesMatch<CadModelProp, InferredCadModelProp>(true)\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const point3 = z.object({\n  x: distance,\n  y: distance,\n  z: distance,\n})\n","import type { LayerRef } from \"circuit-json\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\n\n/**\n * This is an abbreviated definition of the soup elements that you can find here:\n * https://docs.tscircuit.com/api-reference/advanced/soup#pcb-smtpad\n */\nexport type FootprintSoupElements = {\n  type: \"pcb_smtpad\" | \"pcb_plated_hole\"\n  x: string | number\n  y: string | number\n  layer?: LayerRef\n  holeDiameter?: string | number\n  outerDiameter?: string | number\n  shape?: \"circle\" | \"rect\"\n  width?: string | number\n  height?: string | number\n  portHints?: string[]\n}\n\nexport type Footprint = string | ReactElement | FootprintSoupElements[]\nexport const footprintProp = z.custom<Footprint>((v) => true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\n/**\n * @deprecated Use SchematicPortArrangementWithPinCounts instead.\n */\nexport interface SchematicPortArrangementWithSizes {\n  leftSize?: number\n  topSize?: number\n  rightSize?: number\n  bottomSize?: number\n}\n\n/**\n * Specifies the number of pins on each side of the schematic box component.\n */\nexport interface SchematicPortArrangementWithPinCounts {\n  leftPinCount?: number\n  topPinCount?: number\n  rightPinCount?: number\n  bottomPinCount?: number\n}\n\nexport interface PinSideDefinition {\n  pins: Array<number | string>\n  direction:\n    | \"top-to-bottom\"\n    | \"left-to-right\"\n    | \"bottom-to-top\"\n    | \"right-to-left\"\n}\n\nexport interface SchematicPortArrangementWithSides {\n  leftSide?: PinSideDefinition\n  topSide?: PinSideDefinition\n  rightSide?: PinSideDefinition\n  bottomSide?: PinSideDefinition\n}\n\nexport interface SchematicPortArrangement\n  extends SchematicPortArrangementWithSizes,\n    SchematicPortArrangementWithSides,\n    SchematicPortArrangementWithPinCounts {}\n\nexport const explicitPinSideDefinition = z.object({\n  pins: z.array(z.union([z.number(), z.string()])),\n  direction: z.union([\n    z.literal(\"top-to-bottom\"),\n    z.literal(\"left-to-right\"),\n    z.literal(\"bottom-to-top\"),\n    z.literal(\"right-to-left\"),\n  ]),\n})\n\nexport const schematicPortArrangement = z.object({\n  leftSize: z.number().optional().describe(\"@deprecated, use leftPinCount\"),\n  topSize: z.number().optional().describe(\"@deprecated, use topPinCount\"),\n  rightSize: z.number().optional().describe(\"@deprecated, use rightPinCount\"),\n  bottomSize: z.number().optional().describe(\"@deprecated, use bottomPinCount\"),\n  leftPinCount: z.number().optional(),\n  rightPinCount: z.number().optional(),\n  topPinCount: z.number().optional(),\n  bottomPinCount: z.number().optional(),\n  leftSide: explicitPinSideDefinition.optional(),\n  rightSide: explicitPinSideDefinition.optional(),\n  topSide: explicitPinSideDefinition.optional(),\n  bottomSide: explicitPinSideDefinition.optional(),\n})\n\nexpectTypesMatch<\n  SchematicPortArrangement,\n  z.input<typeof schematicPortArrangement>\n>(true)\n","import { distance } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type SchematicPinStyle = Record<\n  string,\n  {\n    leftMargin?: number | string\n    rightMargin?: number | string\n    topMargin?: number | string\n    bottomMargin?: number | string\n  }\n>\n\nexport const schematicPinStyle = z.record(\n  z.object({\n    leftMargin: distance.optional(),\n    rightMargin: distance.optional(),\n    topMargin: distance.optional(),\n    bottomMargin: distance.optional(),\n  }),\n)\n\nexpectTypesMatch<SchematicPinStyle, z.input<typeof schematicPinStyle>>(true)\n","import type { LayoutBuilder, ManualEditFile } from \"@tscircuit/layout\"\nimport { distance } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport { type Point, point } from \"lib/common/point\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport { subcircuitGroupProps, type SubcircuitGroupProps } from \"./group\"\n\nexport interface BoardProps extends Omit<SubcircuitGroupProps, \"subcircuit\"> {\n  width?: number | string\n  height?: number | string\n  outline?: Point[]\n}\n\nexport const boardProps = subcircuitGroupProps.extend({\n  width: distance.optional(),\n  height: distance.optional(),\n  outline: z.array(point).optional(),\n})\n\ntype InferredBoardProps = z.input<typeof boardProps>\nexpectTypesMatch<BoardProps, InferredBoardProps>(true)\n","import { distance } from \"circuit-json\"\nimport { z } from \"zod\"\n\nexport const point = z.object({\n  x: distance,\n  y: distance,\n})\n\nexport type Point = { x: number | string; y: number | string }\n","import type { LayoutBuilder, ManualEditFile } from \"@tscircuit/layout\"\nimport { length } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport {\n  type CommonLayoutProps,\n  commonLayoutProps,\n  type SupplierPartNumbers,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nimport type { AnySourceComponent, PcbTrace } from \"circuit-json\"\n\nexport interface BaseGroupProps extends CommonLayoutProps {\n  name?: string\n  children?: any\n}\n\nexport type PartsEngine = {\n  findPart: (params: {\n    sourceComponent: AnySourceComponent\n    footprinterString?: string\n  }) => Promise<SupplierPartNumbers> | SupplierPartNumbers\n}\n\nexport interface PcbRouteCache {\n  pcbTraces: PcbTrace[]\n  cacheKey: string\n}\n\nexport interface AutorouterConfig {\n  serverUrl?: string\n  inputFormat?: \"simplified\" | \"circuit-json\"\n  serverMode?: \"job\" | \"solve-endpoint\"\n  cache?: PcbRouteCache\n}\n\nexport type AutorouterProp =\n  | AutorouterConfig\n  | \"sequential-trace\"\n  | \"subcircuit\"\n  | \"auto\"\n  | \"auto-local\"\n  | \"auto-cloud\"\n\nexport const autorouterConfig = z.object({\n  serverUrl: z.string().optional(),\n  inputFormat: z.enum([\"simplified\", \"circuit-json\"]).optional(),\n  serverMode: z.enum([\"job\", \"solve-endpoint\"]).optional(),\n  cache: z.custom<PcbRouteCache>((v) => true).optional(),\n})\n\nexport const autorouterProp = z.union([\n  autorouterConfig,\n  z.literal(\"sequential-trace\"),\n  z.literal(\"subcircuit\"),\n  z.literal(\"auto\"),\n  z.literal(\"auto-local\"),\n  z.literal(\"auto-cloud\"),\n])\n\nexport interface SubcircuitGroupProps extends BaseGroupProps {\n  layout?: LayoutBuilder\n  manualEdits?: ManualEditFile\n  routingDisabled?: boolean\n  defaultTraceWidth?: Distance\n  minTraceWidth?: Distance\n  pcbRouteCache?: PcbRouteCache\n\n  autorouter?: AutorouterProp\n\n  /**\n   * If true, we'll automatically layout the schematic for this group. Must be\n   * a subcircuit (currently). This is eventually going to be replaced with more\n   * sophisticated layout options/modes and will be enabled by default.\n   */\n  schAutoLayoutEnabled?: boolean\n\n  partsEngine?: PartsEngine\n}\n\nexport interface SubcircuitGroupPropsWithBool extends SubcircuitGroupProps {\n  subcircuit: true\n}\n\nexport interface NonSubcircuitGroupProps extends BaseGroupProps {\n  subcircuit?: false | undefined\n}\n\nexport type GroupProps = SubcircuitGroupPropsWithBool | NonSubcircuitGroupProps\n\nexport const baseGroupProps = commonLayoutProps.extend({\n  name: z.string().optional(),\n  children: z.any().optional(),\n})\n\nexport const subcircuitGroupProps = baseGroupProps.extend({\n  layout: z.custom<LayoutBuilder>((v) => true).optional(),\n  manualEdits: z.custom<ManualEditFile>((v) => true).optional(),\n  schAutoLayoutEnabled: z.boolean().optional(),\n  routingDisabled: z.boolean().optional(),\n  defaultTraceWidth: length.optional(),\n  minTraceWidth: length.optional(),\n  partsEngine: z.custom<PartsEngine>((v) => \"findPart\" in v).optional(),\n  pcbRouteCache: z.custom<PcbRouteCache>((v) => true).optional(),\n  autorouter: autorouterProp.optional(),\n})\n\nexport const subcircuitGroupPropsWithBool = subcircuitGroupProps.extend({\n  subcircuit: z.literal(true),\n})\n\nexport const groupProps = z.discriminatedUnion(\"subcircuit\", [\n  baseGroupProps.extend({ subcircuit: z.literal(false).optional() }),\n  subcircuitGroupPropsWithBool,\n])\n\ntype InferredBaseGroupProps = z.input<typeof baseGroupProps>\ntype InferredSubcircuitGroupPropsWithBool = z.input<\n  typeof subcircuitGroupPropsWithBool\n>\n\nexpectTypesMatch<BaseGroupProps, InferredBaseGroupProps>(true)\nexpectTypesMatch<\n  SubcircuitGroupPropsWithBool,\n  InferredSubcircuitGroupPropsWithBool\n>(true)\n\ntype InferredGroupProps = z.input<typeof groupProps>\nexpectTypesMatch<GroupProps, InferredGroupProps>(true)\n","import { distance } from \"circuit-json\"\nimport type { Distance } from \"lib/common/distance\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  type SchematicPortArrangement,\n  schematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\nimport {\n  type SchematicPinStyle,\n  schematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ChipProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string | readonly string[]>\n  schPortArrangement?: SchematicPortArrangement\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: Distance\n  schWidth?: Distance\n  schHeight?: Distance\n}\n\nexport type PinLabels = Record<\n  number | string,\n  string | readonly string[] | string[]\n>\n\nexport const pinLabelsProp = z.record(\n  z.number().or(z.string()),\n  z.string().or(z.array(z.string()).readonly()).or(z.array(z.string())),\n)\n\nexpectTypesMatch<PinLabels, z.input<typeof pinLabelsProp>>(true)\n\nexport const chipProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z\n    .record(\n      z.number().or(z.string()),\n      z.string().or(z.array(z.string()).readonly()),\n    )\n    .optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n})\n\n/**\n * @deprecated Use ChipProps instead.\n */\nexport const bugProps = chipProps\nexport type InferredChipProps = z.input<typeof chipProps>\n\nexpectTypesMatch<InferredChipProps, ChipProps>(true)\n","import { distance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  type SchematicPortArrangement,\n  schematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\nimport {\n  type SchematicPinStyle,\n  schematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface JumperProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string | string[]>\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: number | string\n  schWidth?: number | string\n  schHeight?: number | string\n  schDirection?: \"left\" | \"right\"\n  schPortArrangement?: SchematicPortArrangement\n}\n\nexport const jumperProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z\n    .record(z.number().or(z.string()), z.string().or(z.array(z.string())))\n    .optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n  schDirection: z.enum([\"left\", \"right\"]).optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n})\n\ntype InferredJumperProps = z.input<typeof jumperProps>\nexpectTypesMatch<JumperProps, InferredJumperProps>(true)\n","import { distance } from \"circuit-json\"\nimport type { PcbLayoutProps } from \"lib/common/layout\"\nimport { pcbLayoutProps } from \"lib/common/layout\"\nimport { type PortHints, portHints } from \"lib/common/portHints\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface CirclePlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"circle\"\n  holeDiameter: number | string\n  outerDiameter: number | string\n  portHints?: PortHints\n}\n\nexport interface OvalPlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"oval\"\n  outerWidth: number | string\n  outerHeight: number | string\n  innerWidth: number | string\n  innerHeight: number | string\n  portHints?: PortHints\n}\n\nexport interface PillPlatedHoleProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\" | \"layer\"> {\n  name?: string\n  shape: \"pill\"\n  outerWidth: number | string\n  outerHeight: number | string\n  innerWidth: number | string\n  innerHeight: number | string\n  portHints?: PortHints\n}\n\nexport type PlatedHoleProps =\n  | CirclePlatedHoleProps\n  | OvalPlatedHoleProps\n  | PillPlatedHoleProps\n\nexport const platedHoleProps = z.discriminatedUnion(\"shape\", [\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"circle\"),\n    holeDiameter: distance,\n    outerDiameter: distance,\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"oval\"),\n    outerWidth: distance,\n    outerHeight: distance,\n    innerWidth: distance,\n    innerHeight: distance,\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"pill\"),\n    outerWidth: distance,\n    outerHeight: distance,\n    innerWidth: distance,\n    innerHeight: distance,\n    portHints: portHints.optional(),\n  }),\n])\n\ntype InferredPlatedHoleProps = z.input<typeof platedHoleProps>\nexpectTypesMatch<PlatedHoleProps, InferredPlatedHoleProps>(true)\n","import { resistance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ResistorProps extends CommonComponentProps {\n  resistance: number | string\n  pullupFor?: string\n  pullupTo?: string\n  pulldownFor?: string\n  pulldownTo?: string\n}\n\nexport const resistorProps = commonComponentProps.extend({\n  resistance,\n\n  pullupFor: z.string().optional(),\n  pullupTo: z.string().optional(),\n\n  pulldownFor: z.string().optional(),\n  pulldownTo: z.string().optional(),\n})\nexport const resistorPins = lrPins\n\ntype InferredResistorProps = z.input<typeof resistorProps>\nexpectTypesMatch<ResistorProps, InferredResistorProps>(true)\n","import { resistance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport type { z } from \"zod\"\n\nexport interface PotentiometerProps extends CommonComponentProps {\n  maxResistance: number | string\n}\n\nexport const potentiometerProps = commonComponentProps.extend({\n  maxResistance: resistance,\n})\nexport const potentiometerPins = lrPins\n\ntype InferredPotentiometerProps = z.input<typeof potentiometerProps>\nexpectTypesMatch<PotentiometerProps, InferredPotentiometerProps>(true)\n","import { frequency, capacitance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport type PinVariant = \"2pin\" | \"4pin\"\n\nexport interface CrystalProps extends CommonComponentProps {\n  frequency: number | string\n  loadCapacitance: number | string\n  pinVariant?: PinVariant\n}\n\nexport const crystalProps = commonComponentProps.extend({\n  frequency: frequency,\n  loadCapacitance: capacitance,\n  pinVariant: z.enum([\"2pin\", \"4pin\"]).optional(),\n})\nexport const crystalPins = lrPins\n\ntype InferredCrystalProps = z.input<typeof crystalProps>\nexpectTypesMatch<CrystalProps, InferredCrystalProps>(true)\n","import { capacitance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n  lrPolarPins,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface CapacitorProps extends CommonComponentProps {\n  capacitance: number | string\n  polarized?: boolean\n\n  decouplingFor?: string\n  decouplingTo?: string\n\n  bypassFor?: string\n  bypassTo?: string\n}\n\nexport const capacitorProps = commonComponentProps.extend({\n  capacitance,\n\n  polarized: z.boolean().optional().default(false),\n\n  decouplingFor: z.string().optional(),\n  decouplingTo: z.string().optional(),\n\n  bypassFor: z.string().optional(),\n  bypassTo: z.string().optional(),\n})\nexport const capacitorPins = lrPolarPins\n\nexpectTypesMatch<CapacitorProps, z.input<typeof capacitorProps>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface NetProps {\n  name: string\n}\n\nexport const netProps = z.object({\n  name: z.string(),\n})\n\ntype InferredNetProps = z.input<typeof netProps>\nexpectTypesMatch<NetProps, InferredNetProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ConstrainedLayoutProps {\n  name?: string\n  pcbOnly?: boolean\n  schOnly?: boolean\n}\n\nexport const constrainedLayoutProps = z.object({\n  name: z.string().optional(),\n  pcbOnly: z.boolean().optional(),\n  schOnly: z.boolean().optional(),\n})\n\nexport type InferredConstrainedLayoutProps = z.input<\n  typeof constrainedLayoutProps\n>\n\nexpectTypesMatch<InferredConstrainedLayoutProps, ConstrainedLayoutProps>(true)\n","import { z } from \"zod\"\n\nexport type Distance = number | string\n\nexport { distance, length } from \"circuit-json\"\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport type { Distance } from \"lib/common/distance\"\nimport { distance } from \"lib/common/distance\"\nimport { z } from \"zod\"\n\nexport type PcbXDistConstraint = {\n  pcb?: true\n  xDist: Distance\n\n  /**\n   * Selector for left component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  left: string\n\n  /**\n   * Selector for right component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  right: string\n\n  /**\n   * If true, the provided distance is the distance between the closest edges of\n   * the left and right components\n   */\n  edgeToEdge?: true\n\n  /**\n   * If true, the provided distance is the distance between the centers of the\n   * left and right components\n   */\n  centerToCenter?: true\n}\n\nexport type PcbYDistConstraint = {\n  pcb?: true\n  yDist: Distance\n\n  /**\n   * Selector for top component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 topedge\", \".R1 center\"\n   */\n  top: string\n\n  /**\n   * Selector for bottom component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 bottomedge\", \".R1 center\"\n   */\n  bottom: string\n\n  edgeToEdge?: true\n  centerToCenter?: true\n}\n\nexport type PcbSameYConstraint = {\n  pcb?: true\n  sameY?: true\n\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type PcbSameXConstraint = {\n  pcb?: true\n  sameX?: true\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type ConstraintProps =\n  | PcbXDistConstraint\n  | PcbYDistConstraint\n  | PcbSameYConstraint\n  | PcbSameXConstraint\n\n// -----------------------------------------------------------------------------\n// Zod\n// -----------------------------------------------------------------------------\n\nexport const pcbXDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  xDist: distance,\n  left: z.string(),\n  right: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbXDistConstraint, z.input<typeof pcbXDistConstraintProps>>(\n  true,\n)\n\nexport const pcbYDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  yDist: distance,\n  top: z.string(),\n  bottom: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbYDistConstraint, z.input<typeof pcbYDistConstraintProps>>(\n  true,\n)\n\nexport const pcbSameYConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameY: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameYConstraint, z.input<typeof pcbSameYConstraintProps>>(\n  true,\n)\n\nexport const pcbSameXConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameX: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameXConstraint, z.input<typeof pcbSameXConstraintProps>>(\n  true,\n)\n\nexport const constraintProps = z.union([\n  pcbXDistConstraintProps,\n  pcbYDistConstraintProps,\n  pcbSameYConstraintProps,\n  pcbSameXConstraintProps,\n])\n\nexpectTypesMatch<ConstraintProps, z.input<typeof constraintProps>>(true)\n","import {\n  pcbLayoutProps,\n  type CommonLayoutProps,\n  type PcbLayoutProps,\n} from \"lib/common/layout\"\nimport { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { portHints, type PortHints } from \"lib/common/portHints\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n  portHints?: PortHints\n}\n\nexport interface RotatedRectSmtPadProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rotated_rect\"\n  width: Distance\n  height: Distance\n  ccwRotation: number\n  portHints?: PortHints\n}\n\nexport interface CircleSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n  portHints?: PortHints\n}\n\nexport type SmtPadProps =\n  | RectSmtPadProps\n  | CircleSmtPadProps\n  | RotatedRectSmtPadProps\n\n// ----------------------------------------------------------------------------\n// Zod\n// ----------------------------------------------------------------------------\n\nexport const rectSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredRectSmtPadProps = z.input<typeof rectSmtPadProps>\nexpectTypesMatch<InferredRectSmtPadProps, RectSmtPadProps>(true)\n\nexport const rotatedRectSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rotated_rect\"),\n    width: distance,\n    height: distance,\n    ccwRotation: z.number(),\n    portHints: portHints.optional(),\n  })\ntype InferredRotatedRectSmtPadProps = z.input<typeof rotatedRectSmtPadProps>\nexpectTypesMatch<InferredRotatedRectSmtPadProps, RotatedRectSmtPadProps>(true)\n\nexport const circleSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredCircleSmtPadProps = z.input<typeof circleSmtPadProps>\nexpectTypesMatch<InferredCircleSmtPadProps, CircleSmtPadProps>(true)\n\nexport const smtPadProps = z.union([\n  circleSmtPadProps,\n  rectSmtPadProps,\n  rotatedRectSmtPadProps,\n])\n\nexport type InferredSmtPadProps = z.input<typeof smtPadProps>\nexpectTypesMatch<InferredSmtPadProps, SmtPadProps>(true)\n","import { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { boolean, string, z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n}\n\nexport interface CircleSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n}\n\nexport type SolderPasteProps = RectSolderPasteProps | CircleSolderPasteProps\n\n// zod\n\nexport const rectSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  })\ntype InferredRectSolderPasteProps = z.input<typeof rectSolderPasteProps>\nexpectTypesMatch<InferredRectSolderPasteProps, RectSolderPasteProps>(true)\n\nexport const circleSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  })\ntype InferredCircleSolderPasteProps = z.input<typeof circleSolderPasteProps>\nexpectTypesMatch<InferredCircleSolderPasteProps, CircleSolderPasteProps>(true)\n\nexport const solderPasteProps = z.union([\n  circleSolderPasteProps,\n  rectSolderPasteProps,\n])\n\nexport type InferredSolderPasteProps = z.input<typeof solderPasteProps>\nexpectTypesMatch<InferredSolderPasteProps, SolderPasteProps>(true)\n","import { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface HoleProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  name?: string\n  diameter?: Distance\n  radius?: Distance\n}\n\nexport const holeProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    name: z.string().optional(),\n    diameter: distance.optional(),\n    radius: distance.optional(),\n  })\n  .transform((d) => ({\n    ...d,\n    diameter: d.diameter ?? 2 * d.radius!,\n    radius: d.radius ?? d.diameter! / 2,\n  }))\n\nexport type InferredHoleProps = z.input<typeof holeProps>\n\nexpectTypesMatch<HoleProps, InferredHoleProps>(true)\n","import { distance, route_hint_point } from \"circuit-json\"\nimport { z } from \"zod\"\nimport { point } from \"../common/point\"\n\nexport const portRef = z.union([\n  z.string(),\n  z.custom<{ getPortSelector: () => string }>((v) =>\n    Boolean(v.getPortSelector),\n  ),\n])\n\nconst baseTraceProps = z.object({\n  key: z.string().optional(),\n  thickness: distance.optional(),\n  schematicRouteHints: z.array(point).optional(),\n  pcbRouteHints: z.array(route_hint_point).optional(),\n  schDisplayLabel: z.string().optional(),\n})\n\nexport const traceProps = z.union([\n  baseTraceProps.extend({\n    path: z.array(portRef),\n  }),\n  baseTraceProps.extend({\n    from: portRef,\n    to: portRef,\n  }),\n])\n\nexport type TraceProps = z.input<typeof traceProps>\n","import { type LayerRef, layer_ref } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface FootprintProps {\n  /**\n   * The layer that the footprint is designed for. If you set this to \"top\"\n   * then it means the children were intended to represent the top layer. If\n   * the <chip /> with this footprint is moved to the bottom layer, then the\n   * components will be mirrored.\n   *\n   * Generally, you shouldn't set this except where it can help prevent\n   * confusion because you have a complex multi-layer footprint. Default is\n   * \"top\" and this is most intuitive.\n   */\n  originalLayer?: LayerRef\n}\n\nexport const footprintProps = z.object({\n  originalLayer: layer_ref.default(\"top\").optional(),\n})\n\nexport type FootprintPropsInput = z.input<typeof footprintProps>\ntype InferredFootprintProps = z.infer<typeof footprintProps>\nexpectTypesMatch<InferredFootprintProps, FootprintProps>(true)\n","import { z } from \"zod\"\nimport {\n  commonComponentProps,\n  lrPins,\n  lrPolarPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\n/** @deprecated use battery_capacity from circuit-json when circuit-json is updated */\nconst capacity = z\n  .number()\n  .or(z.string().endsWith(\"mAh\"))\n  .transform((v) => {\n    if (typeof v === \"string\") {\n      const valString = v.replace(\"mAh\", \"\")\n      const num = Number.parseFloat(valString)\n      if (Number.isNaN(num)) {\n        throw new Error(\"Invalid capacity\")\n      }\n      return num\n    }\n    return v\n  })\n  .describe(\"Battery capacity in mAh\")\n\nexport interface BatteryProps extends CommonComponentProps {\n  capacity?: number | string\n}\n\nexport const batteryProps = commonComponentProps.extend({\n  capacity: capacity.optional(),\n})\nexport const batteryPins = lrPolarPins\n\nexpectTypesMatch<BatteryProps, z.input<typeof batteryProps>>(true)\n","import { distance } from \"circuit-json\"\nimport {\n  type CommonComponentProps,\n  commonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface PinHeaderProps extends CommonComponentProps {\n  /**\n   * Number of pins in the header\n   */\n  pinCount: number\n\n  /**\n   * Distance between pins\n   */\n  pitch?: number | string\n\n  /**\n   * Whether the header is male or female\n   */\n  gender?: \"male\" | \"female\"\n\n  /**\n   * Whether to show pin labels in silkscreen\n   */\n  showSilkscreenPinLabels?: boolean\n\n  /**\n   * Whether the header has two rows of pins\n   */\n  doubleRow?: boolean\n\n  /**\n   * Diameter of the through-hole for each pin\n   */\n  holeDiameter?: number | string\n\n  /**\n   * Diameter of the plated area around each hole\n   */\n  platedDiameter?: number | string\n\n  /**\n   * Labels for each pin\n   */\n  pinLabels?: string[]\n\n  /**\n   * Direction the header is facing\n   */\n  facingDirection?: \"left\" | \"right\"\n}\n\nexport const pinHeaderProps = commonComponentProps.extend({\n  pinCount: z.number(),\n  pitch: distance.optional(),\n  gender: z.enum([\"male\", \"female\"]).optional().default(\"male\"),\n  showSilkscreenPinLabels: z.boolean().optional(),\n  doubleRow: z.boolean().optional(),\n  holeDiameter: distance.optional(),\n  platedDiameter: distance.optional(),\n  pinLabels: z.array(z.string()).optional(),\n  facingDirection: z.enum([\"left\", \"right\"]).optional(),\n})\n\ntype InferredPinHeaderProps = z.input<typeof pinHeaderProps>\nexpectTypesMatch<PinHeaderProps, InferredPinHeaderProps>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { distance } from \"lib/common/distance\"\nimport { rotation } from \"circuit-json\"\n\nexport interface NetAliasProps {\n  net?: string\n  schX?: number | string\n  schY?: number | string\n  schRotation?: number | string\n  anchorSide?: \"left\" | \"up\" | \"right\" | \"down\"\n}\n\nexport const netAliasProps = z.object({\n  net: z.string().optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  anchorSide: z.enum([\"left\", \"up\", \"right\", \"down\"]).optional(),\n})\n\ntype InferredNetAliasProps = z.input<typeof netAliasProps>\nexpectTypesMatch<NetAliasProps, InferredNetAliasProps>(true)\n","import { commonComponentProps } from \"lib/common/layout\"\nimport { z } from \"zod\"\n\nexport const pushButtonProps = commonComponentProps.extend({})\nexport type PushButtonProps = z.input<typeof pushButtonProps>\n","import type { SubcircuitGroupProps } from \"./group\"\nimport { subcircuitGroupProps } from \"./group\"\nimport type { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type SubcircuitProps = SubcircuitGroupProps\n\nexport const subcircuitProps = subcircuitGroupProps\n\ntype InferredSubcircuitProps = z.input<typeof subcircuitProps>\nexpectTypesMatch<SubcircuitProps, InferredSubcircuitProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport const base_manual_edit_event = z.object({\n  edit_event_id: z.string(),\n  in_progress: z.boolean().optional(),\n  created_at: z.number(),\n})\n\nexport interface BaseManualEditEvent {\n  edit_event_id: string\n  in_progress?: boolean\n  created_at: number\n}\n\nexport type BaseManualEditEventInput = z.input<typeof base_manual_edit_event>\n\nexpectTypesMatch<BaseManualEditEvent, z.infer<typeof base_manual_edit_event>>(\n  true,\n)\n","import { z } from \"zod\"\nimport {\n  base_manual_edit_event,\n  type BaseManualEditEvent,\n} from \"./base_manual_edit_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const edit_pcb_component_location_event = base_manual_edit_event.extend({\n  pcb_edit_event_type: z\n    .literal(\"edit_component_location\")\n    .describe(\"deprecated\"),\n  edit_event_type: z.literal(\"edit_pcb_component_location\"),\n  pcb_component_id: z.string(),\n  original_center: z.object({ x: z.number(), y: z.number() }),\n  new_center: z.object({ x: z.number(), y: z.number() }),\n})\n\n/** @deprecated use edit_pcb_component_location_event instead */\nexport const edit_component_location_event = edit_pcb_component_location_event\n\nexport interface EditPcbComponentLocationEvent extends BaseManualEditEvent {\n  edit_event_type: \"edit_pcb_component_location\"\n  /** @deprecated */\n  pcb_edit_event_type: \"edit_component_location\"\n  pcb_component_id: string\n  original_center: { x: number; y: number }\n  new_center: { x: number; y: number }\n}\n\nexport type EditPcbComponentLocationEventInput = z.input<\n  typeof edit_pcb_component_location_event\n>\n\nexpectTypesMatch<\n  EditPcbComponentLocationEvent,\n  z.infer<typeof edit_pcb_component_location_event>\n>(true)\n","import { z } from \"zod\"\nimport {\n  base_manual_edit_event,\n  type BaseManualEditEvent,\n} from \"./base_manual_edit_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { route_hint_point } from \"circuit-json\"\n\nexport const edit_trace_hint_event = base_manual_edit_event.extend({\n  pcb_edit_event_type: z.literal(\"edit_trace_hint\"),\n  pcb_port_id: z.string(),\n  pcb_trace_hint_id: z.string().optional(),\n  route: z.array(\n    z.object({ x: z.number(), y: z.number(), via: z.boolean().optional() }),\n  ),\n})\n\nexport interface EditTraceHintEvent extends BaseManualEditEvent {\n  pcb_edit_event_type: \"edit_trace_hint\"\n  pcb_port_id: string\n  pcb_trace_hint_id?: string\n  route: Array<{ x: number; y: number; via?: boolean }>\n}\n\nexport type EditTraceHintEventInput = z.input<typeof edit_trace_hint_event>\n\nexpectTypesMatch<EditTraceHintEvent, z.infer<typeof edit_trace_hint_event>>(\n  true,\n)\n","import { z } from \"zod\"\nimport {\n  base_manual_edit_event,\n  type BaseManualEditEvent,\n} from \"./base_manual_edit_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const edit_schematic_component_location_event =\n  base_manual_edit_event.extend({\n    edit_event_type: z.literal(\"edit_schematic_component_location\"),\n    schematic_component_id: z.string(),\n    original_center: z.object({ x: z.number(), y: z.number() }),\n    new_center: z.object({ x: z.number(), y: z.number() }),\n  })\n\nexport interface EditSchematicComponentLocationEvent\n  extends BaseManualEditEvent {\n  edit_event_type: \"edit_schematic_component_location\"\n  schematic_component_id: string\n  original_center: { x: number; y: number }\n  new_center: { x: number; y: number }\n}\n\nexport type EditSchematicComponentLocationEventInput = z.input<\n  typeof edit_schematic_component_location_event\n>\n\nexpectTypesMatch<\n  EditSchematicComponentLocationEvent,\n  z.infer<typeof edit_schematic_component_location_event>\n>(true)\n","import { z } from \"zod\"\nimport { manual_pcb_placement } from \"./manual_pcb_placement\"\nimport { manual_edit_event } from \"./manual_edit_event\"\nimport { manual_trace_hint } from \"./manual_trace_hint\"\nimport { manual_schematic_placement } from \"./manual_schematic_placement\"\n\nexport const manual_edit_file = z.object({\n  pcb_placements: z.array(manual_pcb_placement).optional(),\n  manual_trace_hints: z.array(manual_trace_hint).optional(),\n  schematic_placements: z.array(manual_schematic_placement).optional(),\n})\n","import { z } from \"zod\"\nimport { point, type Point } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_pcb_placement = z.object({\n  selector: z.string(),\n  relative_to: z\n    .string()\n    .optional()\n    .default(\"group_center\")\n    .describe(\"Can be a selector or 'group_center'\"),\n  center: point,\n})\n\nexport interface ManualPcbPlacement {\n  selector: string\n  relative_to: string\n  center: Point\n}\n\nexport type ManualPcbPlacementInput = z.input<typeof manual_pcb_placement>\ntype InferredManualPcbPlacement = z.infer<typeof manual_pcb_placement>\n\nexpectTypesMatch<ManualPcbPlacement, InferredManualPcbPlacement>(true)\n","import { z } from \"zod\"\nimport {\n  edit_component_location_event,\n  type EditPcbComponentLocationEvent,\n} from \"./manual-edit-events/edit_pcb_component_location_event\"\nimport {\n  edit_trace_hint_event,\n  type EditTraceHintEvent,\n} from \"./manual-edit-events/edit_trace_hint_event\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type ManualEditEvent = EditPcbComponentLocationEvent | EditTraceHintEvent\n\nexport const manual_edit_event = z.union([\n  edit_component_location_event,\n  edit_trace_hint_event,\n])\n\nexport type ManualEditEventInput = z.input<typeof manual_edit_event>\ntype InferredManualEditEvent = z.infer<typeof manual_edit_event>\n\nexpectTypesMatch<ManualEditEvent, InferredManualEditEvent>(true)\n","import { z } from \"zod\"\nimport { layer_ref, route_hint_point, type RouteHintPoint } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_trace_hint = z.object({\n  pcb_port_selector: z.string(),\n  offsets: z.array(route_hint_point),\n})\n\nexport interface ManualTraceHint {\n  pcb_port_selector: string\n  offsets: Array<RouteHintPoint>\n}\n\nexport type ManualTraceHintInput = z.input<typeof manual_trace_hint>\n\nexpectTypesMatch<ManualTraceHint, z.infer<typeof manual_trace_hint>>(true)\n","import { z } from \"zod\"\nimport { point, type Point } from \"circuit-json\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const manual_schematic_placement = z.object({\n  selector: z.string(),\n  relative_to: z\n    .string()\n    .optional()\n    .default(\"group_center\")\n    .describe(\"Can be a selector or 'group_center'\"),\n  center: point,\n})\n\nexport interface ManualSchematicPlacement {\n  selector: string\n  relative_to: string\n  center: Point\n}\n\nexport type ManualSchematicPlacementInput = z.input<\n  typeof manual_schematic_placement\n>\ntype InferredManualSchematicPlacement = z.infer<\n  typeof manual_schematic_placement\n>\n\nexpectTypesMatch<ManualSchematicPlacement, InferredManualSchematicPlacement>(\n  true,\n)\n"],"mappings":";AASA;AAAA,EAGE,YAAAA;AAAA,EACA;AAAA,EACA,aAAAC;AAAA,EACA,UAAAC;AAAA,EAGA,SAAAC;AAAA,EAGA,oBAAAC;AAAA,EAEA;AAAA,OACK;AAEP,SAAS,KAAAC,WAAS;;;ACdX,IAAM,mBAAmB,CAO9B,aAOS;AAAC;AAIZ,iBAQE,eAAe;AAEjB,iBAQE,iBAAiB;AAEnB,iBAOE,IAAI;AAEN,iBAOE,iCAAiC;;;ACjEnC,SAAS,SAAS;AACX,IAAM,YAAY,EAAE,KAAK,CAAC,MAAM,QAAQ,QAAQ,OAAO,CAAC;AASxD,IAAM,qBAAqB,EAAE,KAAK;AAAA,EACvC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAuD,IAAI;AAC3D,iBAAyE,IAAI;;;ACnB7E,SAAS,KAAAC,UAAS;AAGX,IAAM,YAAYC,GAAE,MAAMA,GAAE,OAAO,EAAE,GAAGA,GAAE,OAAO,CAAC,CAAC;AAG1D,iBAAuD,IAAI;;;ACN3D;AAAA,EAEE,YAAAC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,OACK;AAEP,SAAS,KAAAC,UAAS;;;ACRlB,SAAS,KAAAC,UAAS;;;ACAlB,SAAS,gBAAgB;AACzB,SAAS,KAAAC,UAAS;AAEX,IAAM,SAASA,GAAE,OAAO;AAAA,EAC7B,GAAG;AAAA,EACH,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ADHM,IAAM,iBAAiBC,GAAE,OAAO;AAAA,EACrC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAGA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC;AACrC,CAAC;AAcM,IAAM,eAAeA,GAAE,OAAO;AAAA,EACnC,gBAAgBA,GAAE,OAAO,EAAE,GAAG,cAAc,EAAE,SAAS;AAAA,EACvD,gBAAgB,OAAO,SAAS;AAAA,EAChC,MAAM,OAAO,SAAS;AACxB,CAAC;AAED,iBAA6D,IAAI;AAK1D,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQA,GAAE,OAAO;AACnB,CAAC;AAMM,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQA,GAAE,OAAO;AAAA,EACjB,QAAQA,GAAE,OAAO,EAAE,SAAS;AAC9B,CAAC;AAKM,IAAM,gBAAgB,aAAa,OAAO;AAAA,EAC/C,OAAOA,GAAE,OAAOA,GAAE,IAAI,CAAC;AACzB,CAAC;AAIM,IAAM,eAAeA,GAAE,MAAM;AAAA,EAClCA,GAAE,OAAO;AAAA,EACT;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAqD,IAAI;;;AE7DzD,SAAS,KAAAC,UAAS;AAoBX,IAAM,gBAAgBA,GAAE,OAAkB,CAAC,MAAM,IAAI;;;AHUrD,IAAM,iBAAiBC,GAAE,OAAO;AAAA,EACrC,MAAMC,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,OAAO,UAAU,SAAS;AAC5B,CAAC;AAED,iBAAyD,IAAI;AAEtD,IAAM,oBAAoBD,GAAE,OAAO;AAAA,EACxC,MAAMC,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,MAAMA,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAa,SAAS,SAAS;AAAA,EAC/B,OAAO,UAAU,SAAS;AAAA,EAC1B,WAAW,cAAc,SAAS;AACpC,CAAC;AAGD,iBAA+D,IAAI;AAa5D,IAAM,gBAAgBD,GAAE,OAAO;AAAA,EACpC,qBAAqBA,GAAE,OAAO,eAAeA,GAAE,MAAMA,GAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAC7E,CAAC;AAED,iBAA+D,IAAI;AAW5D,IAAM,uBAAuB,kBACjC,MAAM,aAAa,EACnB,OAAO;AAAA,EACN,KAAKA,GAAE,IAAI,EAAE,SAAS;AAAA,EACtB,MAAMA,GAAE,OAAO;AAAA,EACf,UAAU,aAAa,SAAS;AAAA,EAChC,UAAUA,GAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,YAAYA,GAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAGH,iBAAqE,IAAI;AAElE,IAAM,SAAS,CAAC,QAAQ,QAAQ,QAAQ,OAAO;AAC/C,IAAM,cAAc;AAAA,EACzB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAEO,IAAM,uBAAuBC,UAAS,GAAGD,GAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;;;AIzG1E,SAAS,KAAAE,UAAS;AA2CX,IAAM,4BAA4BA,GAAE,OAAO;AAAA,EAChD,MAAMA,GAAE,MAAMA,GAAE,MAAM,CAACA,GAAE,OAAO,GAAGA,GAAE,OAAO,CAAC,CAAC,CAAC;AAAA,EAC/C,WAAWA,GAAE,MAAM;AAAA,IACjBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,IACzBA,GAAE,QAAQ,eAAe;AAAA,EAC3B,CAAC;AACH,CAAC;AAEM,IAAM,2BAA2BA,GAAE,OAAO;AAAA,EAC/C,UAAUA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,+BAA+B;AAAA,EACxE,SAASA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,8BAA8B;AAAA,EACtE,WAAWA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,gCAAgC;AAAA,EAC1E,YAAYA,GAAE,OAAO,EAAE,SAAS,EAAE,SAAS,iCAAiC;AAAA,EAC5E,cAAcA,GAAE,OAAO,EAAE,SAAS;AAAA,EAClC,eAAeA,GAAE,OAAO,EAAE,SAAS;AAAA,EACnC,aAAaA,GAAE,OAAO,EAAE,SAAS;AAAA,EACjC,gBAAgBA,GAAE,OAAO,EAAE,SAAS;AAAA,EACpC,UAAU,0BAA0B,SAAS;AAAA,EAC7C,WAAW,0BAA0B,SAAS;AAAA,EAC9C,SAAS,0BAA0B,SAAS;AAAA,EAC5C,YAAY,0BAA0B,SAAS;AACjD,CAAC;AAED,iBAGE,IAAI;;;ACxEN,SAAS,YAAAC,iBAAgB;AAEzB,SAAS,KAAAC,UAAS;AAYX,IAAM,oBAAoBA,GAAE;AAAA,EACjCA,GAAE,OAAO;AAAA,IACP,YAAYC,UAAS,SAAS;AAAA,IAC9B,aAAaA,UAAS,SAAS;AAAA,IAC/B,WAAWA,UAAS,SAAS;AAAA,IAC7B,cAAcA,UAAS,SAAS;AAAA,EAClC,CAAC;AACH;AAEA,iBAAuE,IAAI;;;ACtB3E,SAAS,YAAAC,iBAAgB;;;ACDzB,SAAS,YAAAC,iBAAgB;AACzB,SAAS,KAAAC,UAAS;AAEX,IAAM,QAAQA,GAAE,OAAO;AAAA,EAC5B,GAAGD;AAAA,EACH,GAAGA;AACL,CAAC;;;ADDD,SAAS,KAAAE,WAAS;;;AEJlB,SAAS,cAAc;AAQvB,SAAS,KAAAC,WAAS;AAmCX,IAAM,mBAAmBA,IAAE,OAAO;AAAA,EACvC,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,aAAaA,IAAE,KAAK,CAAC,cAAc,cAAc,CAAC,EAAE,SAAS;AAAA,EAC7D,YAAYA,IAAE,KAAK,CAAC,OAAO,gBAAgB,CAAC,EAAE,SAAS;AAAA,EACvD,OAAOA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AACvD,CAAC;AAEM,IAAM,iBAAiBA,IAAE,MAAM;AAAA,EACpC;AAAA,EACAA,IAAE,QAAQ,kBAAkB;AAAA,EAC5BA,IAAE,QAAQ,YAAY;AAAA,EACtBA,IAAE,QAAQ,MAAM;AAAA,EAChBA,IAAE,QAAQ,YAAY;AAAA,EACtBA,IAAE,QAAQ,YAAY;AACxB,CAAC;AAgCM,IAAM,iBAAiB,kBAAkB,OAAO;AAAA,EACrD,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAUA,IAAE,IAAI,EAAE,SAAS;AAC7B,CAAC;AAEM,IAAM,uBAAuB,eAAe,OAAO;AAAA,EACxD,QAAQA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EACtD,aAAaA,IAAE,OAAuB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EAC5D,sBAAsBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC3C,iBAAiBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EACtC,mBAAmB,OAAO,SAAS;AAAA,EACnC,eAAe,OAAO,SAAS;AAAA,EAC/B,aAAaA,IAAE,OAAoB,CAAC,MAAM,cAAc,CAAC,EAAE,SAAS;AAAA,EACpE,eAAeA,IAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EAC7D,YAAY,eAAe,SAAS;AACtC,CAAC;AAEM,IAAM,+BAA+B,qBAAqB,OAAO;AAAA,EACtE,YAAYA,IAAE,QAAQ,IAAI;AAC5B,CAAC;AAEM,IAAM,aAAaA,IAAE,mBAAmB,cAAc;AAAA,EAC3D,eAAe,OAAO,EAAE,YAAYA,IAAE,QAAQ,KAAK,EAAE,SAAS,EAAE,CAAC;AAAA,EACjE;AACF,CAAC;AAOD,iBAAyD,IAAI;AAC7D,iBAGE,IAAI;AAGN,iBAAiD,IAAI;;;AFlH9C,IAAM,aAAa,qBAAqB,OAAO;AAAA,EACpD,OAAOC,UAAS,SAAS;AAAA,EACzB,QAAQA,UAAS,SAAS;AAAA,EAC1B,SAASC,IAAE,MAAM,KAAK,EAAE,SAAS;AACnC,CAAC;AAGD,iBAAiD,IAAI;;;AGrBrD,SAAS,YAAAC,iBAAgB;AAezB,SAAS,KAAAC,WAAS;AAiBX,IAAM,gBAAgBA,IAAE;AAAA,EAC7BA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC;AAAA,EACxBA,IAAE,OAAO,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS,CAAC,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC;AACtE;AAEA,iBAA2D,IAAI;AAExD,IAAM,YAAY,qBAAqB,OAAO;AAAA,EACnD,wBAAwBA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAWA,IACR;AAAA,IACCA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC;AAAA,IACxBA,IAAE,OAAO,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS,CAAC;AAAA,EAC9C,EACC,SAAS;AAAA,EACZ,oBAAoB,yBAAyB,SAAS;AAAA,EACtD,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAeC,UAAS,SAAS;AAAA,EACjC,UAAUA,UAAS,SAAS;AAAA,EAC5B,WAAWA,UAAS,SAAS;AAC/B,CAAC;AAKM,IAAM,WAAW;AAGxB,iBAA+C,IAAI;;;AC5DnD,SAAS,YAAAC,iBAAgB;AAczB,SAAS,KAAAC,WAAS;AAaX,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,wBAAwBA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAWA,IACR,OAAOA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,CAAC,GAAGA,IAAE,OAAO,EAAE,GAAGA,IAAE,MAAMA,IAAE,OAAO,CAAC,CAAC,CAAC,EACpE,SAAS;AAAA,EACZ,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAeC,UAAS,SAAS;AAAA,EACjC,UAAUA,UAAS,SAAS;AAAA,EAC5B,WAAWA,UAAS,SAAS;AAAA,EAC7B,cAAcD,IAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AAAA,EACjD,oBAAoB,yBAAyB,SAAS;AACxD,CAAC;AAGD,iBAAmD,IAAI;;;ACzCvD,SAAS,YAAAE,iBAAgB;AAKzB,SAAS,KAAAC,WAAS;AAsCX,IAAM,kBAAkBA,IAAE,mBAAmB,SAAS;AAAA,EAC3D,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,QAAQ;AAAA,IACzB,cAAcC;AAAA,IACd,eAAeA;AAAA,IACf,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMD,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,MAAM;AAAA,IACvB,YAAYC;AAAA,IACZ,aAAaA;AAAA,IACb,YAAYA;AAAA,IACZ,aAAaA;AAAA,IACb,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAMD,IAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAOA,IAAE,QAAQ,MAAM;AAAA,IACvB,YAAYC;AAAA,IACZ,aAAaA;AAAA,IACb,YAAYA;AAAA,IACZ,aAAaA;AAAA,IACb,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AACH,CAAC;AAGD,iBAA2D,IAAI;;;ACxE/D,SAAS,kBAAkB;AAO3B,SAAS,KAAAC,WAAS;AAUX,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AAAA,EAEA,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAUA,IAAE,OAAO,EAAE,SAAS;AAAA,EAE9B,aAAaA,IAAE,OAAO,EAAE,SAAS;AAAA,EACjC,YAAYA,IAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AACM,IAAM,eAAe;AAG5B,iBAAuD,IAAI;;;AC7B3D,SAAS,cAAAC,mBAAkB;AAapB,IAAM,qBAAqB,qBAAqB,OAAO;AAAA,EAC5D,eAAeC;AACjB,CAAC;AACM,IAAM,oBAAoB;AAGjC,iBAAiE,IAAI;;;ACnBrE,SAAS,WAAW,mBAAmB;AAOvC,SAAS,KAAAC,WAAS;AAUX,IAAM,eAAe,qBAAqB,OAAO;AAAA,EACtD;AAAA,EACA,iBAAiB;AAAA,EACjB,YAAYA,IAAE,KAAK,CAAC,QAAQ,MAAM,CAAC,EAAE,SAAS;AAChD,CAAC;AACM,IAAM,cAAc;AAG3B,iBAAqD,IAAI;;;ACzBzD,SAAS,eAAAC,oBAAmB;AAO5B,SAAS,KAAAC,WAAS;AAaX,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD,aAAAC;AAAA,EAEA,WAAWD,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAE/C,eAAeA,IAAE,OAAO,EAAE,SAAS;AAAA,EACnC,cAAcA,IAAE,OAAO,EAAE,SAAS;AAAA,EAElC,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAUA,IAAE,OAAO,EAAE,SAAS;AAChC,CAAC;AACM,IAAM,gBAAgB;AAE7B,iBAAiE,IAAI;;;ACjCrE,SAAS,KAAAE,WAAS;AAOX,IAAM,WAAWC,IAAE,OAAO;AAAA,EAC/B,MAAMA,IAAE,OAAO;AACjB,CAAC;AAGD,iBAA6C,IAAI;;;ACXjD,SAAS,KAAAC,WAAS;AAQX,IAAM,yBAAyBA,IAAE,OAAO;AAAA,EAC7C,MAAMA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,SAASA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC9B,SAASA,IAAE,QAAQ,EAAE,SAAS;AAChC,CAAC;AAMD,iBAAyE,IAAI;;;ACnB7E,OAAkB;AAIlB,SAAS,YAAAC,WAAU,UAAAC,eAAc;;;ACDjC,SAAS,KAAAC,WAAS;AAkFX,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOC;AAAA,EACP,MAAMD,IAAE,OAAO;AAAA,EACf,OAAOA,IAAE,OAAO;AAAA,EAEhB,YAAYA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgBA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOC;AAAA,EACP,KAAKD,IAAE,OAAO;AAAA,EACd,QAAQA,IAAE,OAAO;AAAA,EAEjB,YAAYA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgBA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAKA,IAAE,MAAMA,IAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0BA,IAAE,OAAO;AAAA,EAC9C,KAAKA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAOA,IAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAKA,IAAE,MAAMA,IAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,kBAAkBA,IAAE,MAAM;AAAA,EACrC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAmE,IAAI;;;ACnIvE,SAAS,KAAAE,WAAS;AAoCX,IAAM,kBAAkB,eAC5B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOC,IAAE,QAAQ,MAAM;AAAA,EACvB,OAAOC;AAAA,EACP,QAAQA;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA2D,IAAI;AAExD,IAAM,yBAAyB,eACnC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOD,IAAE,QAAQ,cAAc;AAAA,EAC/B,OAAOC;AAAA,EACP,QAAQA;AAAA,EACR,aAAaD,IAAE,OAAO;AAAA,EACtB,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAAyE,IAAI;AAEtE,IAAM,oBAAoB,eAC9B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOA,IAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQC;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA+D,IAAI;AAE5D,IAAM,cAAcD,IAAE,MAAM;AAAA,EACjC;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAmD,IAAI;;;AC/EvD,SAA0B,KAAAE,WAAS;AAoB5B,IAAM,uBAAuB,eACjC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOC,IAAE,QAAQ,MAAM;AAAA,EACvB,OAAOC;AAAA,EACP,QAAQA;AACV,CAAC;AAEH,iBAAqE,IAAI;AAElE,IAAM,yBAAyB,eACnC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAOD,IAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQC;AACV,CAAC;AAEH,iBAAyE,IAAI;AAEtE,IAAM,mBAAmBD,IAAE,MAAM;AAAA,EACtC;AAAA,EACA;AACF,CAAC;AAGD,iBAA6D,IAAI;;;AC/CjE,SAAS,KAAAE,WAAS;AAWX,IAAM,YAAY,eACtB,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,MAAMC,IAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAUC,UAAS,SAAS;AAAA,EAC5B,QAAQA,UAAS,SAAS;AAC5B,CAAC,EACA,UAAU,CAAC,OAAO;AAAA,EACjB,GAAG;AAAA,EACH,UAAU,EAAE,YAAY,IAAI,EAAE;AAAA,EAC9B,QAAQ,EAAE,UAAU,EAAE,WAAY;AACpC,EAAE;AAIJ,iBAA+C,IAAI;;;AC1BnD,SAAS,YAAAC,YAAU,wBAAwB;AAC3C,SAAS,KAAAC,WAAS;AAGX,IAAM,UAAUC,IAAE,MAAM;AAAA,EAC7BA,IAAE,OAAO;AAAA,EACTA,IAAE;AAAA,IAA0C,CAAC,MAC3C,QAAQ,EAAE,eAAe;AAAA,EAC3B;AACF,CAAC;AAED,IAAM,iBAAiBA,IAAE,OAAO;AAAA,EAC9B,KAAKA,IAAE,OAAO,EAAE,SAAS;AAAA,EACzB,WAAWC,WAAS,SAAS;AAAA,EAC7B,qBAAqBD,IAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EAC7C,eAAeA,IAAE,MAAM,gBAAgB,EAAE,SAAS;AAAA,EAClD,iBAAiBA,IAAE,OAAO,EAAE,SAAS;AACvC,CAAC;AAEM,IAAM,aAAaA,IAAE,MAAM;AAAA,EAChC,eAAe,OAAO;AAAA,IACpB,MAAMA,IAAE,MAAM,OAAO;AAAA,EACvB,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,MAAM;AAAA,IACN,IAAI;AAAA,EACN,CAAC;AACH,CAAC;;;AC3BD,SAAwB,aAAAE,kBAAiB;AAEzC,SAAS,KAAAC,WAAS;AAgBX,IAAM,iBAAiBA,IAAE,OAAO;AAAA,EACrC,eAAeC,WAAU,QAAQ,KAAK,EAAE,SAAS;AACnD,CAAC;AAID,iBAAyD,IAAI;;;ACxB7D,SAAS,KAAAC,WAAS;AAUlB,IAAM,WAAWC,IACd,OAAO,EACP,GAAGA,IAAE,OAAO,EAAE,SAAS,KAAK,CAAC,EAC7B,UAAU,CAAC,MAAM;AAChB,MAAI,OAAO,MAAM,UAAU;AACzB,UAAM,YAAY,EAAE,QAAQ,OAAO,EAAE;AACrC,UAAM,MAAM,OAAO,WAAW,SAAS;AACvC,QAAI,OAAO,MAAM,GAAG,GAAG;AACrB,YAAM,IAAI,MAAM,kBAAkB;AAAA,IACpC;AACA,WAAO;AAAA,EACT;AACA,SAAO;AACT,CAAC,EACA,SAAS,yBAAyB;AAM9B,IAAM,eAAe,qBAAqB,OAAO;AAAA,EACtD,UAAU,SAAS,SAAS;AAC9B,CAAC;AACM,IAAM,cAAc;AAE3B,iBAA6D,IAAI;;;ACnCjE,SAAS,YAAAC,kBAAgB;AAMzB,SAAS,KAAAC,WAAS;AAiDX,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD,UAAUA,IAAE,OAAO;AAAA,EACnB,OAAOC,WAAS,SAAS;AAAA,EACzB,QAAQD,IAAE,KAAK,CAAC,QAAQ,QAAQ,CAAC,EAAE,SAAS,EAAE,QAAQ,MAAM;AAAA,EAC5D,yBAAyBA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC9C,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,cAAcC,WAAS,SAAS;AAAA,EAChC,gBAAgBA,WAAS,SAAS;AAAA,EAClC,WAAWD,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACxC,iBAAiBA,IAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AACtD,CAAC;AAGD,iBAAyD,IAAI;;;ACpE7D,SAAS,KAAAE,WAAS;AAGlB,SAAS,YAAAC,iBAAgB;AAUlB,IAAM,gBAAgBC,IAAE,OAAO;AAAA,EACpC,KAAKA,IAAE,OAAO,EAAE,SAAS;AAAA,EACzB,MAAMC,UAAS,SAAS;AAAA,EACxB,MAAMA,UAAS,SAAS;AAAA,EACxB,aAAaF,UAAS,SAAS;AAAA,EAC/B,YAAYC,IAAE,KAAK,CAAC,QAAQ,MAAM,SAAS,MAAM,CAAC,EAAE,SAAS;AAC/D,CAAC;AAGD,iBAAuD,IAAI;;;ACrB3D,OAAkB;AAEX,IAAM,kBAAkB,qBAAqB,OAAO,CAAC,CAAC;;;ACItD,IAAM,kBAAkB;AAG/B,iBAA2D,IAAI;;;ACT/D,SAAS,KAAAE,WAAS;AAEX,IAAM,yBAAyBA,IAAE,OAAO;AAAA,EAC7C,eAAeA,IAAE,OAAO;AAAA,EACxB,aAAaA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAClC,YAAYA,IAAE,OAAO;AACvB,CAAC;AAUD;AAAA,EACE;AACF;;;ACnBA,SAAS,KAAAC,WAAS;AAOX,IAAM,oCAAoC,uBAAuB,OAAO;AAAA,EAC7E,qBAAqBC,IAClB,QAAQ,yBAAyB,EACjC,SAAS,YAAY;AAAA,EACxB,iBAAiBA,IAAE,QAAQ,6BAA6B;AAAA,EACxD,kBAAkBA,IAAE,OAAO;AAAA,EAC3B,iBAAiBA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AAAA,EAC1D,YAAYA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AACvD,CAAC;AAGM,IAAM,gCAAgC;AAe7C,iBAGE,IAAI;;;ACpCN,SAAS,KAAAC,WAAS;AAMlB,OAAiC;AAE1B,IAAM,wBAAwB,uBAAuB,OAAO;AAAA,EACjE,qBAAqBC,IAAE,QAAQ,iBAAiB;AAAA,EAChD,aAAaA,IAAE,OAAO;AAAA,EACtB,mBAAmBA,IAAE,OAAO,EAAE,SAAS;AAAA,EACvC,OAAOA,IAAE;AAAA,IACPA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,GAAG,KAAKA,IAAE,QAAQ,EAAE,SAAS,EAAE,CAAC;AAAA,EACxE;AACF,CAAC;AAWD;AAAA,EACE;AACF;;;AC5BA,SAAS,KAAAC,WAAS;AAOX,IAAM,0CACX,uBAAuB,OAAO;AAAA,EAC5B,iBAAiBC,IAAE,QAAQ,mCAAmC;AAAA,EAC9D,wBAAwBA,IAAE,OAAO;AAAA,EACjC,iBAAiBA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AAAA,EAC1D,YAAYA,IAAE,OAAO,EAAE,GAAGA,IAAE,OAAO,GAAG,GAAGA,IAAE,OAAO,EAAE,CAAC;AACvD,CAAC;AAcH,iBAGE,IAAI;;;AC9BN,SAAS,KAAAC,WAAS;;;ACAlB,SAAS,KAAAC,WAAS;AAClB,SAAS,SAAAC,cAAyB;AAG3B,IAAM,uBAAuBC,IAAE,OAAO;AAAA,EAC3C,UAAUA,IAAE,OAAO;AAAA,EACnB,aAAaA,IACV,OAAO,EACP,SAAS,EACT,QAAQ,cAAc,EACtB,SAAS,qCAAqC;AAAA,EACjD,QAAQC;AACV,CAAC;AAWD,iBAAiE,IAAI;;;ACvBrE,SAAS,KAAAC,WAAS;AAaX,IAAM,oBAAoBC,IAAE,MAAM;AAAA,EACvC;AAAA,EACA;AACF,CAAC;AAKD,iBAA2D,IAAI;;;ACrB/D,SAAS,KAAAC,WAAS;AAClB,SAAoB,oBAAAC,yBAA6C;AAG1D,IAAM,oBAAoBC,IAAE,OAAO;AAAA,EACxC,mBAAmBA,IAAE,OAAO;AAAA,EAC5B,SAASA,IAAE,MAAMC,iBAAgB;AACnC,CAAC;AASD,iBAAqE,IAAI;;;AChBzE,SAAS,KAAAC,WAAS;AAClB,SAAS,SAAAC,cAAyB;AAG3B,IAAM,6BAA6BC,IAAE,OAAO;AAAA,EACjD,UAAUA,IAAE,OAAO;AAAA,EACnB,aAAaA,IACV,OAAO,EACP,SAAS,EACT,QAAQ,cAAc,EACtB,SAAS,qCAAqC;AAAA,EACjD,QAAQC;AACV,CAAC;AAeD;AAAA,EACE;AACF;;;AJvBO,IAAM,mBAAmBC,IAAE,OAAO;AAAA,EACvC,gBAAgBA,IAAE,MAAM,oBAAoB,EAAE,SAAS;AAAA,EACvD,oBAAoBA,IAAE,MAAM,iBAAiB,EAAE,SAAS;AAAA,EACxD,sBAAsBA,IAAE,MAAM,0BAA0B,EAAE,SAAS;AACrE,CAAC;;;AtC+DM,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AACF,CAAC;AACM,IAAM,eAAe;AAGrB,IAAM,aAAa,qBAAqB,OAAO,CAAC,CAAC;AACjD,IAAM,YAAY;AAGlB,IAAM,WAAW,qBAAqB,OAAO;AAAA,EAClD,OAAOC,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AACM,IAAM,UAAU;AAGhB,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,OAAOA,IAAE,QAAQ,QAAQ;AAAA,EACzB,YAAYA,IAAE,KAAK,CAAC,MAAM,CAAC,EAAE,QAAQ,MAAM;AAAA,EAC3C,kBAAkBA,IAAE,QAAQ,EAAE,QAAQ,KAAK;AAC7C,CAAC;AAGM,IAAMC,wBAAuBC,WAAS,GAAGF,IAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;AAEnE,IAAM,WAAW,kBAAkB,OAAO;AAAA,EAC/C,WAAWG;AAAA,EACX,SAASA;AAAA,EACT,cAAcD;AAAA,EACd,eAAeA;AACjB,CAAC;AAGM,IAAM,kBAAkBF,IAAE,MAAM;AAAA,EACrC,eAAe,KAAK,EAAE,aAAa,KAAK,CAAC,EAAE,OAAO;AAAA,IAChD,OAAOA,IAAE,QAAQ,QAAQ;AAAA,IACzB,QAAQE;AAAA,EACV,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,OAAOF,IAAE,QAAQ,MAAM;AAAA,IACvB,OAAOE;AAAA,IACP,QAAQA;AAAA,EACV,CAAC;AACH,CAAC;AAGM,IAAM,oBAAoBF,IAAE,OAAO;AAAA,EACxC,MAAME;AAAA,EACN,MAAMA;AAAA,EACN,OAAOA;AAAA,EACP,QAAQA;AACV,CAAC;AAGM,IAAM,qBAAqBF,IAAE,OAAO;AAAA,EACzC,MAAME;AAAA,EACN,MAAMA;AAAA,EACN,MAAMF,IAAE,OAAO;AACjB,CAAC;AAGM,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EACzC,IAAIE;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AACN,CAAC;AAGM,IAAM,qBAAqBF,IAAE,OAAO;AAAA,EACzC,QAAQA,IAAE,MAAMI,MAAK;AAAA,EACrB,UAAUJ,IAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAC9C,WAAWA,IAAE,KAAK,CAAC,OAAO,MAAM,CAAC,EAAE,SAAS;AAC9C,CAAC;AAGM,IAAM,iBAAiB;AAGvB,IAAM,mBAAmB,qBAAqB,OAAO;AAAA,EAC1D;AACF,CAAC;AAGM,IAAM,YAAY,kBAAkB,OAAO;AAAA,EAChD,MAAMA,IAAE,OAAO;AAAA,EACf,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,SAASA,IAAE,MAAMA,IAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACtC;AACF,CAAC;AAGM,IAAM,sBAAsB,eAAe,OAAO;AAAA,EACvD,MAAMA,IAAE,OAAO;AAAA,EACf,iBAAiBA,IACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAMA,IAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAUK,QAAO,SAAS;AAC5B,CAAC;AAGM,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAOL,IAAE,MAAMM,iBAAgB;AAAA,EAC/B,aAAaD,QAAO,SAAS;AAC/B,CAAC;AAGI,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,aAAaH;AAAA,EACb,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AAAA,EACJ,IAAIA;AACN,CAAC;AAGI,IAAM,sBAAsB,eAChC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAUF,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAaE,WAAS,SAAS;AAAA,EAC/B,OAAOA;AAAA,EACP,QAAQA;AACV,CAAC;AAGI,IAAM,wBAAwB,eAClC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAUF,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAWA,IAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAaE,WAAS,SAAS;AAAA,EAC/B,QAAQA;AACV,CAAC;AAGI,IAAM,sBAAsBF,IAAE,OAAO;AAAA,EAC1C,GAAGE;AAAA,EACH,GAAGA;AAAA,EACH,KAAKF,IAAE,QAAQ,EAAE,SAAS;AAAA,EAC1B,SAASG,WAAU,SAAS;AAC9B,CAAC;AAEM,IAAM,iBAAiBH,IAAE,OAAO;AAAA,EACrC,KAAKA,IACF,OAAO,EACP,SAAS,EACT;AAAA,IACC;AAAA,EACF;AAAA,EACF,OAAOA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,QAAQM,kBAAiB,GAAG,mBAAmB,EAAE,SAAS;AAAA,EAC1D,SAASN,IACN,MAAMM,iBAAgB,EACtB,GAAGN,IAAE,MAAM,mBAAmB,CAAC,EAC/B,SAAS;AAAA,EACZ,YAAYA,IAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAIM,IAAM,gBAAgBA,IAAE,OAAO;AAAA,EACpC,OAAOA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,WAAWE,WAAS,SAAS;AAAA,EAC7B,OAAOF,IAAE,MAAMM,iBAAgB;AACjC,CAAC;AAGM,IAAM,2BAA2B,eAAe,OAAO;AAAA,EAC5D,MAAMN,IAAE,OAAO;AAAA,EACf,iBAAiBA,IACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAMA,IAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAUK,QAAO,SAAS;AAAA,EAC1B,OAAOL,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AAGM,IAAM,2BAA2B,eACrC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAOA,IAAE,MAAMM,iBAAgB;AAAA,EAC/B,aAAaD,QAAO,SAAS;AAAA,EAC7B,OAAOL,IAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;","names":["distance","layer_ref","length","point","route_hint_point","z","z","z","distance","z","z","z","z","z","z","distance","z","distance","z","distance","distance","distance","z","z","z","distance","z","distance","z","distance","distance","z","distance","distance","z","distance","z","resistance","resistance","z","capacitance","z","capacitance","z","z","z","distance","length","z","distance","z","z","distance","z","z","distance","z","z","distance","distance","z","z","distance","layer_ref","z","layer_ref","z","z","distance","z","distance","z","rotation","z","distance","z","z","z","z","z","z","z","z","z","point","z","point","z","z","z","route_hint_point","z","route_hint_point","z","point","z","point","z","z","distanceOrMultiplier","distance","layer_ref","point","length","route_hint_point"]}

package/lib/manual-edits/index.ts

@@ -1,4 +1,5 @@
 export * from "./manual-edit-events"
 export * from "./manual_edit_file"
-export * from "./manual_pcb_position"
+export * from "./manual_pcb_placement"
+export * from "./manual_schematic_placement"
 export * from "./manual_trace_hint"

package/lib/manual-edits/manual-edit-events/edit_pcb_component_location_event.ts

@@ -0,0 +1,37 @@
+import { z } from "zod"
+import {
+  base_manual_edit_event,
+  type BaseManualEditEvent,
+} from "./base_manual_edit_event"
+import { expectTypesMatch } from "lib/typecheck"
+
+export const edit_pcb_component_location_event = base_manual_edit_event.extend({
+  pcb_edit_event_type: z
+    .literal("edit_component_location")
+    .describe("deprecated"),
+  edit_event_type: z.literal("edit_pcb_component_location"),
+  pcb_component_id: z.string(),
+  original_center: z.object({ x: z.number(), y: z.number() }),
+  new_center: z.object({ x: z.number(), y: z.number() }),
+})
+
+/** @deprecated use edit_pcb_component_location_event instead */
+export const edit_component_location_event = edit_pcb_component_location_event
+
+export interface EditPcbComponentLocationEvent extends BaseManualEditEvent {
+  edit_event_type: "edit_pcb_component_location"
+  /** @deprecated */
+  pcb_edit_event_type: "edit_component_location"
+  pcb_component_id: string
+  original_center: { x: number; y: number }
+  new_center: { x: number; y: number }
+}
+
+export type EditPcbComponentLocationEventInput = z.input<
+  typeof edit_pcb_component_location_event
+>
+
+expectTypesMatch<
+  EditPcbComponentLocationEvent,
+  z.infer<typeof edit_pcb_component_location_event>
+>(true)

package/lib/manual-edits/manual-edit-events/edit_schematic_component_location_event.ts

@@ -0,0 +1,31 @@
+import { z } from "zod"
+import {
+  base_manual_edit_event,
+  type BaseManualEditEvent,
+} from "./base_manual_edit_event"
+import { expectTypesMatch } from "lib/typecheck"
+
+export const edit_schematic_component_location_event =
+  base_manual_edit_event.extend({
+    edit_event_type: z.literal("edit_schematic_component_location"),
+    schematic_component_id: z.string(),
+    original_center: z.object({ x: z.number(), y: z.number() }),
+    new_center: z.object({ x: z.number(), y: z.number() }),
+  })
+
+export interface EditSchematicComponentLocationEvent
+  extends BaseManualEditEvent {
+  edit_event_type: "edit_schematic_component_location"
+  schematic_component_id: string
+  original_center: { x: number; y: number }
+  new_center: { x: number; y: number }
+}
+
+export type EditSchematicComponentLocationEventInput = z.input<
+  typeof edit_schematic_component_location_event
+>
+
+expectTypesMatch<
+  EditSchematicComponentLocationEvent,
+  z.infer<typeof edit_schematic_component_location_event>
+>(true)

package/lib/manual-edits/manual-edit-events/index.ts

@@ -1,3 +1,4 @@
 export * from "./base_manual_edit_event"
-export * from "./edit_component_location_event"
+export * from "./edit_pcb_component_location_event"
 export * from "./edit_trace_hint_event"
+export * from "./edit_schematic_component_location_event"

package/lib/manual-edits/manual_edit_event.ts

@@ -1,15 +1,15 @@
 import { z } from "zod"
 import {
   edit_component_location_event,
-  type EditComponentLocationEvent,
-} from "./manual-edit-events/edit_component_location_event"
+  type EditPcbComponentLocationEvent,
+} from "./manual-edit-events/edit_pcb_component_location_event"
 import {
   edit_trace_hint_event,
   type EditTraceHintEvent,
 } from "./manual-edit-events/edit_trace_hint_event"
 import { expectTypesMatch } from "lib/typecheck"
 
-export type ManualEditEvent = EditComponentLocationEvent | EditTraceHintEvent
+export type ManualEditEvent = EditPcbComponentLocationEvent | EditTraceHintEvent
 
 export const manual_edit_event = z.union([
   edit_component_location_event,
@@ -17,5 +17,6 @@ export const manual_edit_event = z.union([
 ])
 
 export type ManualEditEventInput = z.input<typeof manual_edit_event>
+type InferredManualEditEvent = z.infer<typeof manual_edit_event>
 
-expectTypesMatch<ManualEditEvent, z.infer<typeof manual_edit_event>>(true)
+expectTypesMatch<ManualEditEvent, InferredManualEditEvent>(true)

package/lib/manual-edits/manual_edit_file.ts

@@ -1,9 +1,11 @@
 import { z } from "zod"
-import { manual_pcb_placement } from "./manual_pcb_position"
+import { manual_pcb_placement } from "./manual_pcb_placement"
 import { manual_edit_event } from "./manual_edit_event"
 import { manual_trace_hint } from "./manual_trace_hint"
+import { manual_schematic_placement } from "./manual_schematic_placement"
 
 export const manual_edit_file = z.object({
   pcb_placements: z.array(manual_pcb_placement).optional(),
   manual_trace_hints: z.array(manual_trace_hint).optional(),
+  schematic_placements: z.array(manual_schematic_placement).optional(),
 })

package/lib/manual-edits/manual_pcb_placement.ts

@@ -0,0 +1,24 @@
+import { z } from "zod"
+import { point, type Point } from "circuit-json"
+import { expectTypesMatch } from "lib/typecheck"
+
+export const manual_pcb_placement = z.object({
+  selector: z.string(),
+  relative_to: z
+    .string()
+    .optional()
+    .default("group_center")
+    .describe("Can be a selector or 'group_center'"),
+  center: point,
+})
+
+export interface ManualPcbPlacement {
+  selector: string
+  relative_to: string
+  center: Point
+}
+
+export type ManualPcbPlacementInput = z.input<typeof manual_pcb_placement>
+type InferredManualPcbPlacement = z.infer<typeof manual_pcb_placement>
+
+expectTypesMatch<ManualPcbPlacement, InferredManualPcbPlacement>(true)

package/lib/manual-edits/manual_schematic_placement.ts

@@ -0,0 +1,30 @@
+import { z } from "zod"
+import { point, type Point } from "circuit-json"
+import { expectTypesMatch } from "lib/typecheck"
+
+export const manual_schematic_placement = z.object({
+  selector: z.string(),
+  relative_to: z
+    .string()
+    .optional()
+    .default("group_center")
+    .describe("Can be a selector or 'group_center'"),
+  center: point,
+})
+
+export interface ManualSchematicPlacement {
+  selector: string
+  relative_to: string
+  center: Point
+}
+
+export type ManualSchematicPlacementInput = z.input<
+  typeof manual_schematic_placement
+>
+type InferredManualSchematicPlacement = z.infer<
+  typeof manual_schematic_placement
+>
+
+expectTypesMatch<ManualSchematicPlacement, InferredManualSchematicPlacement>(
+  true,
+)

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@tscircuit/props",
-  "version": "0.0.111",
+  "version": "0.0.112",
   "description": "Props for tscircuit builtin component types",
   "main": "dist/index.js",
   "type": "module",

package/lib/manual-edits/manual-edit-events/edit_component_location_event.ts

@@ -1,29 +0,0 @@
-import { z } from "zod"
-import {
-  base_manual_edit_event,
-  type BaseManualEditEvent,
-} from "./base_manual_edit_event"
-import { expectTypesMatch } from "lib/typecheck"
-
-export const edit_component_location_event = base_manual_edit_event.extend({
-  pcb_edit_event_type: z.literal("edit_component_location"),
-  pcb_component_id: z.string(),
-  original_center: z.object({ x: z.number(), y: z.number() }),
-  new_center: z.object({ x: z.number(), y: z.number() }),
-})
-
-export interface EditComponentLocationEvent extends BaseManualEditEvent {
-  pcb_edit_event_type: "edit_component_location"
-  pcb_component_id: string
-  original_center: { x: number; y: number }
-  new_center: { x: number; y: number }
-}
-
-export type EditComponentLocationEventInput = z.input<
-  typeof edit_component_location_event
->
-
-expectTypesMatch<
-  EditComponentLocationEvent,
-  z.infer<typeof edit_component_location_event>
->(true)

package/lib/manual-edits/manual_pcb_position.ts

@@ -1,15 +0,0 @@
-import { z } from "zod"
-import { point } from "circuit-json"
-
-export const manual_pcb_placement = z.object({
-  selector: z.string(),
-  relative_to: z
-    .string()
-    .optional()
-    .default("group_center")
-    .describe("Can be a selector or 'group_center'"),
-  center: point,
-})
-
-export type ManualPcbPosition = z.infer<typeof manual_pcb_placement>
-export type ManualPcbPositionInput = z.input<typeof manual_pcb_placement>