@tscircuit/footprinter 0.0.337 → 0.0.339

package/dist/index.js

@@ -1313,22 +1313,33 @@ var soicWithoutParsing = (parameters) => {
       { x: -sw / 2, y: -sh / 2 }
     ]
   };
-  const courtyardPadding = 0.25;
-  const silkXs = silkscreenBorder.route.map((pt) => pt.x);
-  const silkYs = silkscreenBorder.route.map((pt) => pt.y);
-  const padXExtent = parameters.legsoutside ? parameters.w / 2 + parameters.pl : parameters.w / 2;
-  const crtMinX = Math.min(-padXExtent, ...silkXs) - courtyardPadding;
-  const crtMaxX = Math.max(padXExtent, ...silkXs) + courtyardPadding;
-  const crtMinY = Math.min(...silkYs) - courtyardPadding;
-  const crtMaxY = Math.max(...silkYs) + courtyardPadding;
+  const roundToCourtyardGrid = (value) => Math.round(value / 0.01) * 0.01;
+  const pinRowSpanY = (parameters.num_pins / 2 - 1) * parameters.p + parameters.pw;
+  const courtyardStepInnerHalfX = roundToCourtyardGrid(parameters.w / 2 + 0.25);
+  const courtyardStepOuterHalfX = roundToCourtyardGrid(
+    courtyardStepInnerHalfX + 1.93
+  );
+  const courtyardStepInnerHalfY = roundToCourtyardGrid(pinRowSpanY / 2 + 0.27);
+  const courtyardStepOuterHalfY = roundToCourtyardGrid(pinRowSpanY / 2 + 0.63);
   const courtyard = {
-    type: "pcb_courtyard_rect",
-    pcb_courtyard_rect_id: "",
+    type: "pcb_courtyard_outline",
+    pcb_courtyard_outline_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
-    layer: "top"
+    layer: "top",
+    outline: [
+      { x: -courtyardStepOuterHalfX, y: courtyardStepInnerHalfY },
+      { x: -courtyardStepInnerHalfX, y: courtyardStepInnerHalfY },
+      { x: -courtyardStepInnerHalfX, y: courtyardStepOuterHalfY },
+      { x: courtyardStepInnerHalfX, y: courtyardStepOuterHalfY },
+      { x: courtyardStepInnerHalfX, y: courtyardStepInnerHalfY },
+      { x: courtyardStepOuterHalfX, y: courtyardStepInnerHalfY },
+      { x: courtyardStepOuterHalfX, y: -courtyardStepInnerHalfY },
+      { x: courtyardStepInnerHalfX, y: -courtyardStepInnerHalfY },
+      { x: courtyardStepInnerHalfX, y: -courtyardStepOuterHalfY },
+      { x: -courtyardStepInnerHalfX, y: -courtyardStepOuterHalfY },
+      { x: -courtyardStepInnerHalfX, y: -courtyardStepInnerHalfY },
+      { x: -courtyardStepOuterHalfX, y: -courtyardStepInnerHalfY }
+    ]
   };
   return [
     ...pads,
@@ -2018,6 +2029,20 @@ var tssop = (raw_params) => {
 // src/fn/sot363.ts
 import { z as z18 } from "zod";
 import { length as length13 } from "circuit-json";
+var sot363CourtyardOutline = [
+  { x: -1.45, y: 0.93 },
+  { x: -0.73, y: 0.93 },
+  { x: -0.73, y: 1.1 },
+  { x: 0.73, y: 1.1 },
+  { x: 0.73, y: 0.93 },
+  { x: 1.45, y: 0.93 },
+  { x: 1.45, y: -0.93 },
+  { x: 0.73, y: -0.93 },
+  { x: 0.73, y: -1.1 },
+  { x: -0.73, y: -1.1 },
+  { x: -0.73, y: -0.93 },
+  { x: -1.45, y: -0.93 }
+];
 var sot363_def = base_def.extend({
   fn: z18.string(),
   num_pins: z18.literal(6).default(6),
@@ -2077,18 +2102,11 @@ var sot363 = (raw_params) => {
     pcb_silkscreen_path_id: "pin_marker_1"
   };
   const silkscreenRefText = silkscreenRef(0, h / 2 + 0.4, 0.25);
-  const courtyardPadding = 0.25;
-  const crtMinX = -(0.84 + pl / 2) - courtyardPadding;
-  const crtMaxX = 0.84 + pl / 2 + courtyardPadding;
-  const crtMinY = -(h / 2 + 0.1) - courtyardPadding;
-  const crtMaxY = h / 2 + 0.1 + courtyardPadding;
   const courtyard = {
-    type: "pcb_courtyard_rect",
-    pcb_courtyard_rect_id: "",
+    type: "pcb_courtyard_outline",
+    pcb_courtyard_outline_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    outline: sot363CourtyardOutline,
     layer: "top"
   };
   return {
@@ -2114,6 +2132,12 @@ var getSot363PadCoord = (pn, w, p, pl) => {
 // src/fn/sot886.ts
 import { z as z19 } from "zod";
 import { length as length14 } from "circuit-json";
+var sot886CourtyardOutline = [
+  { x: -0.75, y: 1 },
+  { x: -0.75, y: -1 },
+  { x: 0.75, y: -1 },
+  { x: 0.75, y: 1 }
+];
 var sot886_def = base_def.extend({
   fn: z19.string(),
   num_pins: z19.literal(6).default(6),
@@ -2173,18 +2197,11 @@ var sot886 = (raw_params) => {
     pcb_silkscreen_path_id: "pin_marker_1"
   };
   const silkscreenRefText = silkscreenRef(0, h / 2 + 0.4, 0.25);
-  const courtyardPadding = 0.25;
-  const crtMinX = -w / 2 - courtyardPadding;
-  const crtMaxX = w / 2 + courtyardPadding;
-  const crtMinY = -h / 2 - courtyardPadding;
-  const crtMaxY = h / 2 + courtyardPadding;
   const courtyard = {
-    type: "pcb_courtyard_rect",
-    pcb_courtyard_rect_id: "",
+    type: "pcb_courtyard_outline",
+    pcb_courtyard_outline_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    outline: sot886CourtyardOutline,
     layer: "top"
   };
   return {
@@ -2209,6 +2226,42 @@ var getSot886PadCoord = (pn, w, p, pl) => {
 
 // src/fn/sot23.ts
 import { z as z20 } from "zod";
+var sot23_3CourtyardOutline = [
+  { x: -2.05, y: 1.5 },
+  { x: -1.05, y: 1.5 },
+  { x: -1.05, y: 1.7 },
+  { x: 1.05, y: 1.7 },
+  { x: 1.05, y: 0.55 },
+  { x: 2.05, y: 0.55 },
+  { x: 2.05, y: -0.55 },
+  { x: 1.05, y: -0.55 },
+  { x: 1.05, y: -1.7 },
+  { x: -1.05, y: -1.7 },
+  { x: -1.05, y: -1.5 },
+  { x: -2.05, y: -1.5 },
+  { x: -2.05, y: -0.39 },
+  { x: -1.05, y: -0.39 },
+  { x: -1.05, y: 0.39 },
+  { x: -2.05, y: 0.39 }
+];
+var sot23_5CourtyardOutline = [
+  { x: -2.05, y: 1.5 },
+  { x: -1.05, y: 1.5 },
+  { x: -1.05, y: 1.7 },
+  { x: 1.05, y: 1.7 },
+  { x: 1.05, y: 1.5 },
+  { x: 2.05, y: 1.5 },
+  { x: 2.05, y: 0.39 },
+  { x: 1.05, y: 0.39 },
+  { x: 1.05, y: -0.39 },
+  { x: 2.05, y: -0.39 },
+  { x: 2.05, y: -1.5 },
+  { x: 1.05, y: -1.5 },
+  { x: 1.05, y: -1.7 },
+  { x: -1.05, y: -1.7 },
+  { x: -1.05, y: -1.5 },
+  { x: -2.05, y: -1.5 }
+];
 var sot23_def = base_def.extend({
   fn: z20.string(),
   num_pins: z20.number().default(3),
@@ -2291,21 +2344,11 @@ var sot23_3 = (parameters) => {
     Number.parseInt(parameters.h),
     0.3
   );
-  const courtyardPadding = 0.25;
-  const pl_val = Number.parseFloat(parameters.pl);
-  const pw_val = Number.parseFloat(parameters.pw);
-  const p_val = Number.parseFloat(parameters.p);
-  const crtMinX = -1.1375 - pl_val / 2 - courtyardPadding;
-  const crtMaxX = 1.1375 + pl_val / 2 + courtyardPadding;
-  const crtMinY = -(p_val + pw_val / 2) - courtyardPadding;
-  const crtMaxY = p_val + pw_val / 2 + courtyardPadding;
   const courtyard = {
-    type: "pcb_courtyard_rect",
-    pcb_courtyard_rect_id: "",
+    type: "pcb_courtyard_outline",
+    pcb_courtyard_outline_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    outline: sot23_3CourtyardOutline,
     layer: "top"
   };
   return [...pads, silkscreenRefText, courtyard];
@@ -2409,24 +2452,11 @@ var sot23_5 = (parameters) => {
     ],
     stroke_width: 0.05
   };
-  const courtyardPadding = 0.25;
-  const pl_val = Number.parseFloat(parameters.pl);
-  const pw_val = Number.parseFloat(parameters.pw);
-  const p_val = Number.parseFloat(parameters.p);
-  const silkY = height / 2 + p_val / 1.3;
-  const padYExtent = p_val + pw_val / 2;
-  const padXExtent = 1.1375 + pl_val / 2;
-  const crtMinX = -padXExtent - courtyardPadding;
-  const crtMaxX = padXExtent + courtyardPadding;
-  const crtMinY = -Math.max(silkY, padYExtent) - courtyardPadding;
-  const crtMaxY = Math.max(silkY, padYExtent) + courtyardPadding;
   const courtyard = {
-    type: "pcb_courtyard_rect",
-    pcb_courtyard_rect_id: "",
+    type: "pcb_courtyard_outline",
+    pcb_courtyard_outline_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    outline: sot23_5CourtyardOutline,
     layer: "top"
   };
   return [
@@ -2534,18 +2564,17 @@ var dfn = (raw_params) => {
     sh / 2 + 0.4,
     sh / 12
   );
-  const courtyardPadding = 0.25;
-  const crtMinX = -sw / 2 - courtyardPadding;
-  const crtMaxX = sw / 2 + courtyardPadding;
-  const crtMinY = -sh / 2 - courtyardPadding;
-  const crtMaxY = sh / 2 + courtyardPadding;
+  const roundUpToCourtyardGrid = (value) => Math.ceil(value / 0.05) * 0.05;
+  const pinRowSpanY = (parameters.num_pins / 2 - 1) * parameters.p + parameters.pw;
+  const courtyardHalfWidthMm = roundUpToCourtyardGrid(parameters.w / 2 + 0.25);
+  const courtyardHalfHeightMm = roundUpToCourtyardGrid(pinRowSpanY / 2 + 0.45);
   const courtyard = {
     type: "pcb_courtyard_rect",
     pcb_courtyard_rect_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    center: { x: 0, y: 0 },
+    width: courtyardHalfWidthMm * 2,
+    height: courtyardHalfHeightMm * 2,
     layer: "top"
   };
   return {
@@ -2940,6 +2969,20 @@ var pinrow = (raw_params) => {
 // src/fn/sot563.ts
 import { z as z24 } from "zod";
 import { length as length16 } from "circuit-json";
+var sot563CourtyardOutline = [
+  { x: -1.2, y: 0.83 },
+  { x: -0.75, y: 0.83 },
+  { x: -0.75, y: 0.95 },
+  { x: 0.75, y: 0.95 },
+  { x: 0.75, y: 0.83 },
+  { x: 1.2, y: 0.83 },
+  { x: 1.2, y: -0.83 },
+  { x: 0.75, y: -0.83 },
+  { x: 0.75, y: -0.95 },
+  { x: -0.75, y: -0.95 },
+  { x: -0.75, y: -0.83 },
+  { x: -1.2, y: -0.83 }
+];
 var sot563_def = base_def.extend({
   fn: z24.string(),
   num_pins: z24.literal(6).default(6),
@@ -2999,18 +3042,11 @@ var sot563 = (raw_params) => {
     pcb_silkscreen_path_id: "pin_marker_1"
   };
   const silkscreenRefText = silkscreenRef(0, h / 2 + 0.4, 0.25);
-  const courtyardPadding = 0.25;
-  const crtMinX = -w / 2 - courtyardPadding;
-  const crtMaxX = w / 2 + courtyardPadding;
-  const crtMinY = -h / 2 - courtyardPadding;
-  const crtMaxY = h / 2 + courtyardPadding;
   const courtyard = {
-    type: "pcb_courtyard_rect",
-    pcb_courtyard_rect_id: "",
+    type: "pcb_courtyard_outline",
+    pcb_courtyard_outline_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    outline: sot563CourtyardOutline,
     layer: "top"
   };
   return {
@@ -3083,22 +3119,18 @@ var sot723 = (raw_params) => {
     length17.parse(parameters.h),
     0.2
   );
-  const p_val = length17.parse(parameters.p);
-  const pl_val = length17.parse(parameters.pl);
-  const pw_val = length17.parse(parameters.pw);
-  const h_val = length17.parse(parameters.h);
-  const courtyardPadding = 0.25;
-  const crtMinX = -(p_val + pl_val / 2 + courtyardPadding);
-  const crtMaxX = p_val + pl_val / 2 + courtyardPadding;
-  const crtMinY = -(Math.max(h_val / 2, 0.4 + pw_val / 2) + courtyardPadding);
-  const crtMaxY = Math.max(h_val / 2, 0.4 + pw_val / 2) + courtyardPadding;
+  const courtyardWidthMm = 1.8;
+  const courtyardHeightMm = 1.8;
   const courtyard = {
-    type: "pcb_courtyard_rect",
-    pcb_courtyard_rect_id: "",
+    type: "pcb_courtyard_outline",
+    pcb_courtyard_outline_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    outline: [
+      { x: -courtyardWidthMm / 2, y: courtyardHeightMm / 2 },
+      { x: courtyardWidthMm / 2, y: courtyardHeightMm / 2 },
+      { x: courtyardWidthMm / 2, y: -courtyardHeightMm / 2 },
+      { x: -courtyardWidthMm / 2, y: -courtyardHeightMm / 2 }
+    ],
     layer: "top"
   };
   return {
@@ -3392,18 +3424,13 @@ var radial = (raw_params) => {
   if (hasPolarity) {
     circuitJson.push(plusHoriz, plusVert);
   }
-  const courtyardPadding = 0.25;
-  const crtMinX = hasPolarity ? plusX - plusSize - courtyardPadding : -(bodyR + courtyardPadding);
-  const crtMaxX = bodyR + courtyardPadding;
-  const crtMinY = -(bodyR + courtyardPadding);
-  const crtMaxY = bodyR + courtyardPadding;
+  const courtyardRadiusMm = p + 0.25;
   const courtyard = {
-    type: "pcb_courtyard_rect",
-    pcb_courtyard_rect_id: "",
+    type: "pcb_courtyard_circle",
+    pcb_courtyard_circle_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: 0 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    center: { x: 0, y: 0 },
+    radius: courtyardRadiusMm,
     layer: "top"
   };
   circuitJson.push(courtyard);
@@ -4560,6 +4587,12 @@ var platedHolePill = (pn, x, y, holeDiameter, outerWidth, outerHeight) => {
 };
 
 // src/fn/to92.ts
+var to92CourtyardOutline = [
+  { x: -2.73, y: 3.71 },
+  { x: -2.73, y: -1.03 },
+  { x: 2.73, y: -1.03 },
+  { x: 2.73, y: 3.71 }
+];
 var to92_def = base_def.extend({
   fn: z35.string(),
   num_pins: z35.union([z35.literal(3), z35.literal(2)]).default(3),
@@ -4668,18 +4701,11 @@ var to92 = (raw_params) => {
     pcb_silkscreen_path_id: ""
   };
   const silkscreenRefText = silkscreenRef(0, holeY + 1, 0.5);
-  const courtyardPadding = 0.25;
-  const crtMinX = -(radius + courtyardPadding);
-  const crtMaxX = radius + courtyardPadding;
-  const crtMaxY = holeY + radius + courtyardPadding;
-  const crtMinY = -courtyardPadding;
   const courtyard = {
-    type: "pcb_courtyard_rect",
-    pcb_courtyard_rect_id: "",
+    type: "pcb_courtyard_outline",
+    pcb_courtyard_outline_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    outline: to92CourtyardOutline,
     layer: "top"
   };
   return {
@@ -5762,6 +5788,18 @@ var sodWithoutParsing11 = (parameters) => {
 
 // src/fn/sot89.ts
 import { z as z47 } from "zod";
+var sot89_3CourtyardOutline = [
+  { x: -3.0875, y: -2.5 },
+  { x: -3.0875, y: 2.5 },
+  { x: 2.0125, y: 2.5 },
+  { x: 2.0125, y: -2.5 }
+];
+var sot89_5CourtyardOutline = [
+  { x: -2.85, y: -2.5 },
+  { x: -2.85, y: 2.5 },
+  { x: 2.85, y: 2.5 },
+  { x: 2.85, y: -2.5 }
+];
 var sot89_def = base_def.extend({
   fn: z47.string(),
   num_pins: z47.union([z47.literal(3), z47.literal(5)]).default(3),
@@ -5812,19 +5850,11 @@ var sot89_3 = (parameters) => {
     type: "pcb_silkscreen_path",
     stroke_width: 0.1
   };
-  const courtyardPadding = 0.25;
-  const padOuterX = length63 / 2 + (padHeight + centerExtra) / 2;
-  const crtMinX = -(padOuterX + courtyardPadding);
-  const crtMaxX = length63 / 2 - 1 + courtyardPadding;
-  const crtMinY = -(height + courtyardPadding);
-  const crtMaxY = height + courtyardPadding;
   const courtyard = {
-    type: "pcb_courtyard_rect",
-    pcb_courtyard_rect_id: "",
+    type: "pcb_courtyard_outline",
+    pcb_courtyard_outline_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    outline: sot89_3CourtyardOutline,
     layer: "top"
   };
   return [
@@ -5876,18 +5906,11 @@ var sot89_5 = (parameters) => {
     type: "pcb_silkscreen_path",
     stroke_width: 0.1
   };
-  const courtyardPadding = 0.25;
-  const crtMinX = -(2.6 + courtyardPadding);
-  const crtMaxX = 2.6 + courtyardPadding;
-  const crtMinY = -(height + courtyardPadding);
-  const crtMaxY = height + courtyardPadding;
   const courtyard = {
-    type: "pcb_courtyard_rect",
-    pcb_courtyard_rect_id: "",
+    type: "pcb_courtyard_outline",
+    pcb_courtyard_outline_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    outline: sot89_5CourtyardOutline,
     layer: "top"
   };
   return [
@@ -6132,23 +6155,15 @@ var minimelf = (raw_params) => {
     stroke_width: 0.1,
     pcb_silkscreen_path_id: ""
   };
-  const p_v = length40.parse(parameters.p);
-  const pl_v = length40.parse(parameters.pl);
-  const pw_v = length40.parse(parameters.pw);
-  const h_v = length40.parse(parameters.h);
-  const w_v = length40.parse(parameters.w);
-  const courtyardPadding = 0.25;
-  const crtMinX = -(Math.max(w_v / 2, p_v / 2 + pl_v / 2) + courtyardPadding);
-  const crtMaxX = p_v / 2 + pl_v / 2 + courtyardPadding;
-  const crtMinY = -(Math.max(h_v / 2, pw_v / 2) + courtyardPadding);
-  const crtMaxY = Math.max(h_v / 2, pw_v / 2) + courtyardPadding;
+  const courtyardWidthMm = 5.3;
+  const courtyardHeightMm = 2.2;
   const courtyard = {
     type: "pcb_courtyard_rect",
     pcb_courtyard_rect_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    center: { x: 0, y: 0 },
+    width: courtyardWidthMm,
+    height: courtyardHeightMm,
     layer: "top"
   };
   return {
@@ -6320,23 +6335,15 @@ var melf = (raw_params) => {
     stroke_width: 0.1,
     pcb_silkscreen_path_id: ""
   };
-  const p_v = length42.parse(parameters.p);
-  const pl_v = length42.parse(parameters.pl);
-  const pw_v = length42.parse(parameters.pw);
-  const h_v = length42.parse(parameters.h);
-  const w_v = length42.parse(parameters.w);
-  const courtyardPadding = 0.25;
-  const crtMinX = -(Math.max(w_v / 2, p_v / 2 + pl_v / 2) + courtyardPadding);
-  const crtMaxX = p_v / 2 + pl_v / 2 + courtyardPadding;
-  const crtMinY = -(Math.max(h_v / 2, pw_v / 2) + courtyardPadding);
-  const crtMaxY = Math.max(h_v / 2, pw_v / 2) + courtyardPadding;
+  const courtyardWidthMm = 6.8;
+  const courtyardHeightMm = 3.2;
   const courtyard = {
     type: "pcb_courtyard_rect",
     pcb_courtyard_rect_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    center: { x: 0, y: 0 },
+    width: courtyardWidthMm,
+    height: courtyardHeightMm,
     layer: "top"
   };
   return {
@@ -6420,23 +6427,15 @@ var micromelf = (raw_params) => {
     stroke_width: 0.1,
     pcb_silkscreen_path_id: ""
   };
-  const p_v = length43.parse(parameters.p);
-  const pl_v = length43.parse(parameters.pl);
-  const pw_v = length43.parse(parameters.pw);
-  const h_v = length43.parse(parameters.h);
-  const w_v = length43.parse(parameters.w);
-  const courtyardPadding = 0.25;
-  const crtMinX = -(Math.max(w_v / 2 + 0.1, p_v / 2 + pl_v / 2) + courtyardPadding);
-  const crtMaxX = p_v / 2 + pl_v / 2 + courtyardPadding;
-  const crtMinY = -(Math.max(h_v / 2, pw_v / 2) + courtyardPadding);
-  const crtMaxY = Math.max(h_v / 2, pw_v / 2) + courtyardPadding;
+  const courtyardWidthMm = 2.9;
+  const courtyardHeightMm = 1.7;
   const courtyard = {
     type: "pcb_courtyard_rect",
     pcb_courtyard_rect_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    center: { x: 0, y: 0 },
+    width: courtyardWidthMm,
+    height: courtyardHeightMm,
     layer: "top"
   };
   return {
@@ -7969,20 +7968,33 @@ var msop = (raw_params) => {
     silkscreenBoxHeight / 2 + 0.5,
     0.3
   );
-  const courtyardPadding = 0.25;
-  const padCenterX = length51.parse("2mm");
-  const crtMinX = -(padCenterX + pl / 2) - courtyardPadding;
-  const crtMaxX = padCenterX + pl / 2 + courtyardPadding;
-  const crtMinY = -silkscreenBoxHeight / 2 - courtyardPadding;
-  const crtMaxY = silkscreenBoxHeight / 2 + courtyardPadding;
+  const roundToCourtyardGrid = (value) => Math.round(value / 0.01) * 0.01;
+  const pinRowSpanY = (parameters.num_pins / 2 - 1) * p + pw;
+  const courtyardStepInnerHalfX = roundToCourtyardGrid(w / 2 + 0.25);
+  const courtyardStepOuterHalfX = roundToCourtyardGrid(
+    courtyardStepInnerHalfX + 1.43
+  );
+  const courtyardStepInnerHalfY = roundToCourtyardGrid(pinRowSpanY / 2 + 0.255);
+  const courtyardStepOuterHalfY = roundToCourtyardGrid(h / 2 + 0.25);
   const courtyard = {
-    type: "pcb_courtyard_rect",
-    pcb_courtyard_rect_id: "",
+    type: "pcb_courtyard_outline",
+    pcb_courtyard_outline_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
-    layer: "top"
+    layer: "top",
+    outline: [
+      { x: -courtyardStepOuterHalfX, y: courtyardStepInnerHalfY },
+      { x: -courtyardStepInnerHalfX, y: courtyardStepInnerHalfY },
+      { x: -courtyardStepInnerHalfX, y: courtyardStepOuterHalfY },
+      { x: courtyardStepInnerHalfX, y: courtyardStepOuterHalfY },
+      { x: courtyardStepInnerHalfX, y: courtyardStepInnerHalfY },
+      { x: courtyardStepOuterHalfX, y: courtyardStepInnerHalfY },
+      { x: courtyardStepOuterHalfX, y: -courtyardStepInnerHalfY },
+      { x: courtyardStepInnerHalfX, y: -courtyardStepInnerHalfY },
+      { x: courtyardStepInnerHalfX, y: -courtyardStepOuterHalfY },
+      { x: -courtyardStepInnerHalfX, y: -courtyardStepOuterHalfY },
+      { x: -courtyardStepInnerHalfX, y: -courtyardStepInnerHalfY },
+      { x: -courtyardStepOuterHalfX, y: -courtyardStepInnerHalfY }
+    ]
   };
   return {
     circuitJson: [
@@ -8745,6 +8757,12 @@ var sot457 = (rawParams) => {
 // src/fn/sot963.ts
 import { z as z70 } from "zod";
 import { length as length57 } from "circuit-json";
+var sot963CourtyardOutline = [
+  { x: -0.8, y: 0.75 },
+  { x: 0.8, y: 0.75 },
+  { x: 0.8, y: -0.75 },
+  { x: -0.8, y: -0.75 }
+];
 var sot963_def = base_def.extend({
   fn: z70.string(),
   num_pins: z70.literal(6).default(6),
@@ -8804,18 +8822,11 @@ var sot963 = (raw_params) => {
     pcb_silkscreen_path_id: "pin_marker_1"
   };
   const silkscreenRefText = silkscreenRef(0, h / 2 + 0.4, 0.25);
-  const courtyardPadding = 0.25;
-  const crtMinX = -(w / 2 + courtyardPadding);
-  const crtMaxX = w / 2 + courtyardPadding;
-  const crtMinY = -(Math.max(h / 2, p + pw / 2) + courtyardPadding);
-  const crtMaxY = Math.max(h / 2, p + pw / 2) + courtyardPadding;
   const courtyard = {
-    type: "pcb_courtyard_rect",
-    pcb_courtyard_rect_id: "",
+    type: "pcb_courtyard_outline",
+    pcb_courtyard_outline_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    outline: sot963CourtyardOutline,
     layer: "top"
   };
   return {
@@ -9159,6 +9170,24 @@ var smbfWithoutParsing = (parameters) => {
 
 // src/fn/sot323.ts
 import { z as z74 } from "zod";
+var sot323CourtyardOutline = [
+  { x: -1.45, y: 0.98 },
+  { x: -0.73, y: 0.98 },
+  { x: -0.73, y: 1.1 },
+  { x: 0.73, y: 1.1 },
+  { x: 0.73, y: 0.33 },
+  { x: 1.45, y: 0.33 },
+  { x: 1.45, y: -0.33 },
+  { x: 0.73, y: -0.33 },
+  { x: 0.73, y: -1.1 },
+  { x: -0.73, y: -1.1 },
+  { x: -0.73, y: -0.98 },
+  { x: -1.45, y: -0.98 },
+  { x: -1.45, y: -0.32 },
+  { x: -0.73, y: -0.32 },
+  { x: -0.73, y: 0.32 },
+  { x: -1.45, y: 0.32 }
+];
 var sot323_def = base_def.extend({
   fn: z74.string(),
   num_pins: z74.number().default(3),
@@ -9246,22 +9275,11 @@ var sot323_3 = (parameters) => {
     type: "pcb_silkscreen_path",
     stroke_width: 0.1
   };
-  const p = Number.parseFloat(parameters.p);
-  const pl = Number.parseFloat(parameters.pl);
-  const pw = Number.parseFloat(parameters.pw);
-  const h = Number.parseFloat(parameters.h);
-  const courtyardPadding = 0.25;
-  const crtMinX = -(p + pl / 2 + courtyardPadding);
-  const crtMaxX = p + pl / 2 + courtyardPadding;
-  const crtMinY = -(Math.max(h / 2 + 0.3, 0.65 + pw / 2) + courtyardPadding);
-  const crtMaxY = Math.max(h / 2 + 0.3, 0.65 + pw / 2) + courtyardPadding;
   const courtyard = {
-    type: "pcb_courtyard_rect",
-    pcb_courtyard_rect_id: "",
+    type: "pcb_courtyard_outline",
+    pcb_courtyard_outline_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    outline: sot323CourtyardOutline,
     layer: "top"
   };
   return [
@@ -9559,6 +9577,20 @@ var sotWithoutParsing = (parameters) => {
 
 // src/fn/sot343.ts
 import { z as z78 } from "zod";
+var sot343CourtyardOutline = [
+  { x: -1.703, y: 0.98 },
+  { x: -0.983, y: 0.98 },
+  { x: -0.983, y: 1.1 },
+  { x: 0.477, y: 1.1 },
+  { x: 0.477, y: 0.98 },
+  { x: 1.197, y: 0.98 },
+  { x: 1.197, y: -0.98 },
+  { x: 0.477, y: -0.98 },
+  { x: 0.477, y: -1.1 },
+  { x: -0.983, y: -1.1 },
+  { x: -0.983, y: -0.98 },
+  { x: -1.703, y: -0.98 }
+];
 var sot343_def = base_def.extend({
   fn: z78.string(),
   num_pins: z78.number().default(4),
@@ -9653,18 +9685,11 @@ var sot343_4 = (parameters) => {
     type: "pcb_silkscreen_path",
     stroke_width: 0.1
   };
-  const courtyardPadding = 0.25;
-  const crtMinX = minX - pl / 2 - courtyardPadding;
-  const crtMaxX = maxX + pl / 2 + courtyardPadding;
-  const crtMinY = -(offsetY + courtyardPadding);
-  const crtMaxY = offsetY + courtyardPadding;
   const courtyard = {
-    type: "pcb_courtyard_rect",
-    pcb_courtyard_rect_id: "",
+    type: "pcb_courtyard_outline",
+    pcb_courtyard_outline_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    outline: sot343CourtyardOutline,
     layer: "top"
   };
   return [
@@ -10278,6 +10303,18 @@ var mountedpcbmodule = (raw_params) => {
 
 // src/fn/to92l.ts
 import { z as z81 } from "zod";
+var to92lCourtyardOutline = [
+  { x: -1.45, y: 2.75 },
+  { x: -1.45, y: -1.85 },
+  { x: 4.05, y: -1.85 },
+  { x: 4.05, y: 2.75 }
+];
+var to92lInlineCourtyardOutline = [
+  { x: -1.55, y: 2.75 },
+  { x: -1.55, y: -1.85 },
+  { x: 3.95, y: -1.85 },
+  { x: 3.95, y: 2.75 }
+];
 var to92l_def = base_def.extend({
   fn: z81.string(),
   num_pins: z81.number().default(3),
@@ -10336,18 +10373,11 @@ var to92l = (raw_params) => {
     cy + radius + 1,
     0.5
   );
-  const courtyardPadding = 0.25;
-  const crtMinX = cx - radius - courtyardPadding;
-  const crtMaxX = cx + radius + courtyardPadding;
-  const crtMaxY = cy + radius + courtyardPadding;
-  const crtMinY = y_bottom - courtyardPadding;
   const courtyard = {
-    type: "pcb_courtyard_rect",
-    pcb_courtyard_rect_id: "",
+    type: "pcb_courtyard_outline",
+    pcb_courtyard_outline_id: "",
     pcb_component_id: "",
-    center: { x: (crtMinX + crtMaxX) / 2, y: (crtMinY + crtMaxY) / 2 },
-    width: crtMaxX - crtMinX,
-    height: crtMaxY - crtMinY,
+    outline: parameters.inline ? to92lInlineCourtyardOutline : to92lCourtyardOutline,
     layer: "top"
   };
   return {