@tscircuit/footprinter 0.0.181 → 0.0.182

package/dist/index.d.ts

@@ -1026,6 +1026,92 @@ declare const any_footprinter_def: z.ZodUnion<[z.ZodObject<{
 }, {
     w: string | number;
     h: string | number;
+}>, z.ZodEffects<z.ZodObject<{
+    fn: z.ZodString;
+    circle: z.ZodOptional<z.ZodBoolean>;
+    rect: z.ZodOptional<z.ZodBoolean>;
+    square: z.ZodOptional<z.ZodBoolean>;
+    d: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    pd: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    diameter: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    r: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    pr: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    radius: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    w: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    pw: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    width: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    h: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    ph: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    height: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    s: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    size: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    string: z.ZodOptional<z.ZodString>;
+}, "strip", z.ZodTypeAny, {
+    fn: string;
+    string?: string | undefined;
+    circle?: boolean | undefined;
+    w?: number | undefined;
+    rect?: boolean | undefined;
+    width?: number | undefined;
+    height?: number | undefined;
+    radius?: number | undefined;
+    pw?: number | undefined;
+    ph?: number | undefined;
+    h?: number | undefined;
+    square?: boolean | undefined;
+    d?: number | undefined;
+    pd?: number | undefined;
+    diameter?: number | undefined;
+    r?: number | undefined;
+    pr?: number | undefined;
+    s?: number | undefined;
+    size?: number | undefined;
+}, {
+    fn: string;
+    string?: string | undefined;
+    circle?: boolean | undefined;
+    w?: string | number | undefined;
+    rect?: boolean | undefined;
+    width?: string | number | undefined;
+    height?: string | number | undefined;
+    radius?: string | number | undefined;
+    pw?: string | number | undefined;
+    ph?: string | number | undefined;
+    h?: string | number | undefined;
+    square?: boolean | undefined;
+    d?: string | number | undefined;
+    pd?: string | number | undefined;
+    diameter?: string | number | undefined;
+    r?: string | number | undefined;
+    pr?: string | number | undefined;
+    s?: string | number | undefined;
+    size?: string | number | undefined;
+}>, {
+    fn: string;
+    shape: "circle" | "rect" | "square";
+    radius: number | undefined;
+    width: number | undefined;
+    height: number | undefined;
+}, {
+    fn: string;
+    string?: string | undefined;
+    circle?: boolean | undefined;
+    w?: string | number | undefined;
+    rect?: boolean | undefined;
+    width?: string | number | undefined;
+    height?: string | number | undefined;
+    radius?: string | number | undefined;
+    pw?: string | number | undefined;
+    ph?: string | number | undefined;
+    h?: string | number | undefined;
+    square?: boolean | undefined;
+    d?: string | number | undefined;
+    pd?: string | number | undefined;
+    diameter?: string | number | undefined;
+    r?: string | number | undefined;
+    pr?: string | number | undefined;
+    s?: string | number | undefined;
+    size?: string | number | undefined;
 }>]>;
 type AnyFootprinterDefinitionOutput = z.infer<typeof any_footprinter_def>;
 
@@ -1111,6 +1197,11 @@ type Footprinter = {
     stampboard: () => FootprinterParamsBuilder<"w" | "h" | "left" | "right" | "top" | "bottom" | "p" | "pw" | "pl" | "innerhole" | "innerholeedgedistance">;
     stampreceiver: () => FootprinterParamsBuilder<"w" | "h" | "left" | "right" | "top" | "bottom" | "p" | "pw" | "pl" | "innerhole" | "innerholeedgedistance">;
     breakoutheaders: () => FootprinterParamsBuilder<"w" | "h" | "left" | "right" | "top" | "bottom" | "p" | "id" | "od">;
+    smtpad: () => FootprinterParamsBuilder<"circle" | "rect" | "square" | "d" | "pd" | "diameter" | "r" | "pr" | "radius" | "w" | "pw" | "width" | "h" | "ph" | "height" | "s" | "size"> & {
+        params: () => any;
+        soup: () => AnySoupElement[];
+        circuitJson: () => AnyCircuitElement[];
+    };
     pad: () => FootprinterParamsBuilder<"w" | "h"> & {
         params: () => any;
         soup: () => AnySoupElement[];

package/dist/index.js

@@ -40,6 +40,7 @@ __export(fn_exports, {
   smbf: () => smbf,
   smc: () => smc,
   smf: () => smf,
+  smtpad: () => smtpad,
   sod110: () => sod110,
   sod123: () => sod123,
   sod123f: () => sod123f,
@@ -4041,12 +4042,12 @@ var sot89_3 = (parameters) => {
   const pads = [];
   const padGap = Number.parseFloat(parameters.p);
   const padWidth = Number.parseFloat(parameters.pw);
-  const length46 = Number.parseFloat(parameters.w);
+  const length47 = Number.parseFloat(parameters.w);
   const padHeight = Number.parseFloat(parameters.pl);
   pads.push(
-    rectpad(1, -length46 / 2, padGap, padHeight, padWidth),
-    rectpad(2, -length46 / 2 + (1.5 - 1.3) / 2, 0, 1.5, padWidth),
-    rectpad(3, -length46 / 2, -padGap, padHeight, padWidth)
+    rectpad(1, -length47 / 2, padGap, padHeight, padWidth),
+    rectpad(2, -length47 / 2 + (1.5 - 1.3) / 2, 0, 1.5, padWidth),
+    rectpad(3, -length47 / 2, -padGap, padHeight, padWidth)
   );
   const silkscreenRefText = silkscreenRef(0, 0, 0.3);
   const width = Number.parseFloat(parameters.w) / 2 - 1;
@@ -4086,7 +4087,7 @@ var sot89_5 = (parameters) => {
   const pads = [];
   const padGap = Number.parseFloat(parameters.p);
   const padWidth = Number.parseFloat(parameters.pw);
-  const length46 = Number.parseFloat(parameters.w);
+  const length47 = Number.parseFloat(parameters.w);
   pads.push(
     rectpad(1, -1.85, -1.5, 1.5, 0.7),
     rectpad(2, -1.85, 1.5, 1.5, 0.7),
@@ -6613,29 +6614,121 @@ var sot323_3 = (parameters) => {
   ];
 };
 
-// src/fn/platedhole.ts
+// src/fn/smtpad.ts
 import { z as z58 } from "zod";
 import { length as length45 } from "circuit-json";
+
+// src/helpers/circlepad.ts
+var circlepad = (pn, { x, y, radius }) => {
+  return {
+    type: "pcb_smtpad",
+    x,
+    y,
+    radius,
+    layer: "top",
+    shape: "circle",
+    pcb_smtpad_id: "",
+    port_hints: Array.isArray(pn) ? pn.map((item) => item.toString()) : [pn.toString()]
+  };
+};
+
+// src/fn/smtpad.ts
 import { mm as mm6 } from "@tscircuit/mm";
-var platedhole_def = z58.object({
+var smtpad_def = z58.object({
   fn: z58.string(),
+  circle: z58.boolean().optional(),
+  rect: z58.boolean().optional(),
+  square: z58.boolean().optional(),
   d: length45.optional(),
-  hd: length45.optional(),
-  r: length45.optional(),
-  hr: length45.optional(),
   pd: length45.optional(),
+  diameter: length45.optional(),
+  r: length45.optional(),
   pr: length45.optional(),
-  squarepad: z58.boolean().optional().default(false)
+  radius: length45.optional(),
+  w: length45.optional(),
+  pw: length45.optional(),
+  width: length45.optional(),
+  h: length45.optional(),
+  ph: length45.optional(),
+  height: length45.optional(),
+  s: length45.optional(),
+  size: length45.optional(),
+  string: z58.string().optional()
+}).transform((v) => {
+  let shape = "rect";
+  if (v.circle) shape = "circle";
+  if (v.square) shape = "square";
+  if (v.rect) shape = "rect";
+  let radius;
+  let width;
+  let height;
+  if (shape === "circle") {
+    if (v.r !== void 0) radius = mm6(v.r);
+    else if (v.pr !== void 0) radius = mm6(v.pr);
+    else if (v.radius !== void 0) radius = mm6(v.radius);
+    else if (v.d !== void 0) radius = mm6(v.d) / 2;
+    else if (v.pd !== void 0) radius = mm6(v.pd) / 2;
+    else if (v.diameter !== void 0) radius = mm6(v.diameter) / 2;
+    else radius = mm6("1mm") / 2;
+  } else {
+    if (v.w !== void 0) width = mm6(v.w);
+    else if (v.pw !== void 0) width = mm6(v.pw);
+    else if (v.width !== void 0) width = mm6(v.width);
+    else if (v.s !== void 0) width = mm6(v.s);
+    else if (v.size !== void 0) width = mm6(v.size);
+    else width = mm6("1mm");
+    if (v.h !== void 0) height = mm6(v.h);
+    else if (v.ph !== void 0) height = mm6(v.ph);
+    else if (v.height !== void 0) height = mm6(v.height);
+    else height = width;
+  }
+  return {
+    fn: v.fn,
+    shape,
+    radius,
+    width,
+    height
+  };
+});
+var smtpad = (raw_params) => {
+  const params = smtpad_def.parse(raw_params);
+  const { shape, radius, width, height } = params;
+  return {
+    circuitJson: [
+      shape === "circle" ? circlepad(1, { x: 0, y: 0, radius }) : rectpad(1, 0, 0, width, height),
+      silkscreenRef(
+        0,
+        shape === "circle" ? radius + 0.5 : height / 2 + 0.5,
+        0.2
+      )
+    ],
+    parameters: params
+  };
+};
+
+// src/fn/platedhole.ts
+import { z as z59 } from "zod";
+import { length as length46 } from "circuit-json";
+import { mm as mm7 } from "@tscircuit/mm";
+var platedhole_def = z59.object({
+  fn: z59.string(),
+  d: length46.optional(),
+  hd: length46.optional(),
+  r: length46.optional(),
+  hr: length46.optional(),
+  pd: length46.optional(),
+  pr: length46.optional(),
+  squarepad: z59.boolean().optional().default(false)
 }).transform((v) => {
   let holeD;
-  if (v.d !== void 0) holeD = mm6(v.d);
-  else if (v.hd !== void 0) holeD = mm6(v.hd);
-  else if (v.r !== void 0) holeD = mm6(v.r) * 2;
-  else if (v.hr !== void 0) holeD = mm6(v.hr) * 2;
-  else holeD = mm6("1mm");
+  if (v.d !== void 0) holeD = mm7(v.d);
+  else if (v.hd !== void 0) holeD = mm7(v.hd);
+  else if (v.r !== void 0) holeD = mm7(v.r) * 2;
+  else if (v.hr !== void 0) holeD = mm7(v.hr) * 2;
+  else holeD = mm7("1mm");
   let padD;
-  if (v.pd !== void 0) padD = mm6(v.pd);
-  else if (v.pr !== void 0) padD = mm6(v.pr) * 2;
+  if (v.pd !== void 0) padD = mm7(v.pd);
+  else if (v.pr !== void 0) padD = mm7(v.pr) * 2;
   else padD = holeD * (1.5 / 1);
   return {
     fn: v.fn,
@@ -6657,14 +6750,14 @@ var platedhole3 = (raw_params) => {
 };
 
 // src/fn/sot.ts
-import { z as z59 } from "zod";
-var sot_def = z59.object({
-  fn: z59.string(),
-  num_pins: z59.literal(6).default(6),
-  h: z59.string().default("1.6mm"),
-  pl: z59.string().default("1mm"),
-  pw: z59.string().default("0.7mm"),
-  p: z59.string().default("0.95mm")
+import { z as z60 } from "zod";
+var sot_def = z60.object({
+  fn: z60.string(),
+  num_pins: z60.literal(6).default(6),
+  h: z60.string().default("1.6mm"),
+  pl: z60.string().default("1mm"),
+  pw: z60.string().default("0.7mm"),
+  p: z60.string().default("0.95mm")
 });
 var sot = (raw_params) => {
   const parameters = sot_def.parse(raw_params);