@tscircuit/footprinter 0.0.163 → 0.0.165

package/dist/index.js

@@ -2903,11 +2903,19 @@ var pad = (params) => {
 };
 
 // src/fn/to92.ts
-import {
-  length as length15
-} from "circuit-json";
 import { z as z21 } from "zod";
-var generate_semicircle = (centerX, centerY, radius) => {
+var to92_def = z21.object({
+  fn: z21.string(),
+  num_pins: z21.union([z21.literal(3), z21.literal(2)]).default(3),
+  p: z21.string().default("1.27mm"),
+  id: z21.string().default("0.72mm"),
+  od: z21.string().default("0.95mm"),
+  w: z21.string().default("4.5mm"),
+  h: z21.string().default("4.5mm"),
+  inline: z21.boolean().default(false),
+  string: z21.string().optional()
+});
+var generateSemicircle = (centerX, centerY, radius) => {
   return Array.from({ length: 25 }, (_, i) => {
     const theta = i / 24 * Math.PI;
     return {
@@ -2916,30 +2924,43 @@ var generate_semicircle = (centerX, centerY, radius) => {
     };
   });
 };
-var to92_def = z21.object({
-  fn: z21.string(),
-  p: length15.optional().default("1.27mm"),
-  id: length15.optional().default("0.72mm"),
-  od: length15.optional().default(".95mm"),
-  w: length15.optional().default("4.5mm"),
-  h: length15.optional().default("4.5mm"),
-  inline: z21.boolean().optional().default(false)
-});
+var to92_2 = (parameters) => {
+  const { p, id, od, h } = parameters;
+  const holeY = Number.parseFloat(h) / 2;
+  const padSpacing = Number.parseFloat(p);
+  return [
+    platedhole(1, -padSpacing, holeY - padSpacing, id, od),
+    platedhole(2, padSpacing, holeY - padSpacing, id, od)
+  ];
+};
 var to92 = (raw_params) => {
-  const parameters = to92_def.parse(raw_params);
+  const match = raw_params.string?.match(/^to92_(\d+)/);
+  const numPins = match ? Number.parseInt(match[1], 10) : 3;
+  const parameters = to92_def.parse({
+    ...raw_params,
+    num_pins: numPins
+  });
   const { p, id, od, w, h, inline } = parameters;
-  const radius = w / 2;
-  const holeY = h / 2;
-  const plated_holes = inline ? [
-    platedhole(1, -p, holeY - p, id, od),
-    platedhole(2, 0, holeY - p, id, od),
-    platedhole(3, p, holeY - p, id, od)
-  ] : [
-    platedhole(1, 0, holeY, id, od),
-    platedhole(2, -p, holeY - p, id, od),
-    platedhole(3, p, holeY - p, id, od)
-  ];
-  const semicircle = generate_semicircle(0, h / 2, radius);
+  const holeY = Number.parseFloat(h) / 2;
+  const padSpacing = Number.parseFloat(p);
+  let platedHoles = [];
+  if (parameters.num_pins === 3) {
+    platedHoles = inline ? [
+      platedhole(1, -padSpacing, holeY - padSpacing, id, od),
+      platedhole(2, 0, holeY - padSpacing, id, od),
+      platedhole(3, padSpacing, holeY - padSpacing, id, od)
+    ] : [
+      platedhole(1, 0, holeY, id, od),
+      platedhole(2, -padSpacing, holeY - padSpacing, id, od),
+      platedhole(3, padSpacing, holeY - padSpacing, id, od)
+    ];
+  } else if (parameters.num_pins === 2) {
+    platedHoles = to92_2(parameters);
+  } else {
+    throw new Error("Invalid number of pins for TO-92");
+  }
+  const radius = Number.parseFloat(w) / 2;
+  const semicircle = generateSemicircle(0, holeY, radius);
   const silkscreenBody = {
     type: "pcb_silkscreen_path",
     layer: "top",
@@ -2953,10 +2974,10 @@ var to92 = (raw_params) => {
     stroke_width: 0.1,
     pcb_silkscreen_path_id: ""
   };
-  const silkscreenRefText = silkscreenRef(0, h / 2 + 1, 0.5);
+  const silkscreenRefText = silkscreenRef(0, holeY + 1, 0.5);
   return {
     circuitJson: [
-      ...plated_holes,
+      ...platedHoles,
       silkscreenBody,
       silkscreenRefText
     ],
@@ -2966,7 +2987,7 @@ var to92 = (raw_params) => {
 
 // src/fn/sod523.ts
 import { z as z22 } from "zod";
-import { length as length16 } from "circuit-json";
+import { length as length15 } from "circuit-json";
 var sod_def2 = z22.object({
   fn: z22.string(),
   num_pins: z22.literal(2).default(2),
@@ -2980,7 +3001,7 @@ var sod523 = (raw_params) => {
   const parameters = sod_def2.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length16.parse(parameters.h),
+    length15.parse(parameters.h),
     0.3
   );
   const silkscreenLine = {
@@ -2989,20 +3010,20 @@ var sod523 = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length16.parse(parameters.p) / 2,
-        y: length16.parse(parameters.h) / 2
+        x: length15.parse(parameters.p) / 2,
+        y: length15.parse(parameters.h) / 2
       },
       {
-        x: -length16.parse(parameters.w) / 2 - 0.2,
-        y: length16.parse(parameters.h) / 2
+        x: -length15.parse(parameters.w) / 2 - 0.2,
+        y: length15.parse(parameters.h) / 2
       },
       {
-        x: -length16.parse(parameters.w) / 2 - 0.2,
-        y: -length16.parse(parameters.h) / 2
+        x: -length15.parse(parameters.w) / 2 - 0.2,
+        y: -length15.parse(parameters.h) / 2
       },
       {
-        x: length16.parse(parameters.p) / 2,
-        y: -length16.parse(parameters.h) / 2
+        x: length15.parse(parameters.p) / 2,
+        y: -length15.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -3091,7 +3112,7 @@ var sop8 = (raw_params) => {
 
 // src/fn/sod80.ts
 import { z as z23 } from "zod";
-import { length as length17 } from "circuit-json";
+import { length as length16 } from "circuit-json";
 var sod80_def = z23.object({
   fn: z23.string(),
   num_pins: z23.literal(2).default(2),
@@ -3105,7 +3126,7 @@ var sod80 = (raw_params) => {
   const parameters = sod80_def.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length17.parse(parameters.h) / 2 + 1,
+    length16.parse(parameters.h) / 2 + 1,
     0.3
   );
   const silkscreenLine = {
@@ -3114,20 +3135,20 @@ var sod80 = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length17.parse(parameters.p) / 2 + 0.5,
-        y: length17.parse(parameters.h) / 2 + 0.5
+        x: length16.parse(parameters.p) / 2 + 0.5,
+        y: length16.parse(parameters.h) / 2 + 0.5
       },
       {
-        x: -length17.parse(parameters.w) / 2 - 0.5,
-        y: length17.parse(parameters.h) / 2 + 0.5
+        x: -length16.parse(parameters.w) / 2 - 0.5,
+        y: length16.parse(parameters.h) / 2 + 0.5
       },
       {
-        x: -length17.parse(parameters.w) / 2 - 0.5,
-        y: -length17.parse(parameters.h) / 2 - 0.5
+        x: -length16.parse(parameters.w) / 2 - 0.5,
+        y: -length16.parse(parameters.h) / 2 - 0.5
       },
       {
-        x: length17.parse(parameters.p) / 2 + 0.5,
-        y: -length17.parse(parameters.h) / 2 - 0.5
+        x: length16.parse(parameters.p) / 2 + 0.5,
+        y: -length16.parse(parameters.h) / 2 - 0.5
       }
     ],
     stroke_width: 0.1,
@@ -3167,7 +3188,7 @@ var sod80WithoutParsing = (parameters) => {
 
 // src/fn/sod123w.ts
 import { z as z24 } from "zod";
-import { length as length18 } from "circuit-json";
+import { length as length17 } from "circuit-json";
 var sod_def3 = z24.object({
   fn: z24.string(),
   num_pins: z24.literal(2).default(2),
@@ -3181,7 +3202,7 @@ var sod123w = (raw_params) => {
   const parameters = sod_def3.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length18.parse(parameters.h) - 0.5,
+    length17.parse(parameters.h) - 0.5,
     0.3
   );
   const silkscreenLine = {
@@ -3190,20 +3211,20 @@ var sod123w = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length18.parse(parameters.p) / 2,
-        y: length18.parse(parameters.h) / 2
+        x: length17.parse(parameters.p) / 2,
+        y: length17.parse(parameters.h) / 2
       },
       {
-        x: -length18.parse(parameters.w) / 2 - 0.2,
-        y: length18.parse(parameters.h) / 2
+        x: -length17.parse(parameters.w) / 2 - 0.2,
+        y: length17.parse(parameters.h) / 2
       },
       {
-        x: -length18.parse(parameters.w) / 2 - 0.2,
-        y: -length18.parse(parameters.h) / 2
+        x: -length17.parse(parameters.w) / 2 - 0.2,
+        y: -length17.parse(parameters.h) / 2
       },
       {
-        x: length18.parse(parameters.p) / 2,
-        y: -length18.parse(parameters.h) / 2
+        x: length17.parse(parameters.p) / 2,
+        y: -length17.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -3246,7 +3267,7 @@ var sodWithoutParsing3 = (parameters) => {
 
 // src/fn/sod323.ts
 import { z as z25 } from "zod";
-import { length as length19 } from "circuit-json";
+import { length as length18 } from "circuit-json";
 var sod_def4 = z25.object({
   fn: z25.string(),
   num_pins: z25.literal(2).default(2),
@@ -3260,7 +3281,7 @@ var sod323 = (raw_params) => {
   const parameters = sod_def4.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length19.parse(parameters.h) - 0.5,
+    length18.parse(parameters.h) - 0.5,
     0.3
   );
   const silkscreenLine = {
@@ -3269,20 +3290,20 @@ var sod323 = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length19.parse(parameters.p) / 2,
-        y: length19.parse(parameters.h) / 2
+        x: length18.parse(parameters.p) / 2,
+        y: length18.parse(parameters.h) / 2
       },
       {
-        x: -length19.parse(parameters.w) / 2,
-        y: length19.parse(parameters.h) / 2
+        x: -length18.parse(parameters.w) / 2,
+        y: length18.parse(parameters.h) / 2
       },
       {
-        x: -length19.parse(parameters.w) / 2,
-        y: -length19.parse(parameters.h) / 2
+        x: -length18.parse(parameters.w) / 2,
+        y: -length18.parse(parameters.h) / 2
       },
       {
-        x: length19.parse(parameters.p) / 2,
-        y: -length19.parse(parameters.h) / 2
+        x: length18.parse(parameters.p) / 2,
+        y: -length18.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -3325,7 +3346,7 @@ var sodWithoutParsing4 = (parameters) => {
 
 // src/fn/sod923.ts
 import { z as z26 } from "zod";
-import { length as length20 } from "circuit-json";
+import { length as length19 } from "circuit-json";
 var sod_def5 = z26.object({
   fn: z26.string(),
   num_pins: z26.literal(2).default(2),
@@ -3339,7 +3360,7 @@ var sod923 = (raw_params) => {
   const parameters = sod_def5.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length20.parse(parameters.h),
+    length19.parse(parameters.h),
     0.3
   );
   const silkscreenLine = {
@@ -3348,20 +3369,20 @@ var sod923 = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length20.parse(parameters.p) / 2 + 0.15,
-        y: length20.parse(parameters.h) / 2
+        x: length19.parse(parameters.p) / 2 + 0.15,
+        y: length19.parse(parameters.h) / 2
       },
       {
-        x: -length20.parse(parameters.w) / 2 - 0.4,
-        y: length20.parse(parameters.h) / 2
+        x: -length19.parse(parameters.w) / 2 - 0.4,
+        y: length19.parse(parameters.h) / 2
       },
       {
-        x: -length20.parse(parameters.w) / 2 - 0.4,
-        y: -length20.parse(parameters.h) / 2
+        x: -length19.parse(parameters.w) / 2 - 0.4,
+        y: -length19.parse(parameters.h) / 2
       },
       {
-        x: length20.parse(parameters.p) / 2 + 0.15,
-        y: -length20.parse(parameters.h) / 2
+        x: length19.parse(parameters.p) / 2 + 0.15,
+        y: -length19.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -3405,7 +3426,7 @@ var sodWithoutParsing5 = (parameters) => {
 
 // src/fn/sod882.ts
 import { z as z27 } from "zod";
-import { length as length21 } from "circuit-json";
+import { length as length20 } from "circuit-json";
 var sod_def6 = z27.object({
   fn: z27.string(),
   num_pins: z27.literal(2).default(2),
@@ -3419,7 +3440,7 @@ var sod882 = (raw_params) => {
   const parameters = sod_def6.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length21.parse(parameters.h) + 0.1,
+    length20.parse(parameters.h) + 0.1,
     0.3
   );
   const silkscreenLine = {
@@ -3428,20 +3449,20 @@ var sod882 = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length21.parse(parameters.p) / 2 + 0.2,
-        y: length21.parse(parameters.h) / 2 + 0.2
+        x: length20.parse(parameters.p) / 2 + 0.2,
+        y: length20.parse(parameters.h) / 2 + 0.2
       },
       {
-        x: -length21.parse(parameters.w) / 2 - 0.2,
-        y: length21.parse(parameters.h) / 2 + 0.2
+        x: -length20.parse(parameters.w) / 2 - 0.2,
+        y: length20.parse(parameters.h) / 2 + 0.2
       },
       {
-        x: -length21.parse(parameters.w) / 2 - 0.2,
-        y: -length21.parse(parameters.h) / 2 - 0.2
+        x: -length20.parse(parameters.w) / 2 - 0.2,
+        y: -length20.parse(parameters.h) / 2 - 0.2
       },
       {
-        x: length21.parse(parameters.p) / 2 + 0.2,
-        y: -length21.parse(parameters.h) / 2 - 0.2
+        x: length20.parse(parameters.p) / 2 + 0.2,
+        y: -length20.parse(parameters.h) / 2 - 0.2
       }
     ],
     stroke_width: 0.1,
@@ -3485,7 +3506,7 @@ var sodWithoutParsing6 = (parameters) => {
 
 // src/fn/sod323f.ts
 import { z as z28 } from "zod";
-import { length as length22 } from "circuit-json";
+import { length as length21 } from "circuit-json";
 var sod_def7 = z28.object({
   fn: z28.string(),
   num_pins: z28.literal(2).default(2),
@@ -3499,7 +3520,7 @@ var sod323f = (raw_params) => {
   const parameters = sod_def7.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length22.parse(parameters.h),
+    length21.parse(parameters.h),
     0.3
   );
   const silkscreenLine = {
@@ -3508,20 +3529,20 @@ var sod323f = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length22.parse(parameters.pad_spacing) / 2,
-        y: length22.parse(parameters.h) / 2
+        x: length21.parse(parameters.pad_spacing) / 2,
+        y: length21.parse(parameters.h) / 2
       },
       {
-        x: -length22.parse(parameters.w) / 2 - 0.2,
-        y: length22.parse(parameters.h) / 2
+        x: -length21.parse(parameters.w) / 2 - 0.2,
+        y: length21.parse(parameters.h) / 2
       },
       {
-        x: -length22.parse(parameters.w) / 2 - 0.2,
-        y: -length22.parse(parameters.h) / 2
+        x: -length21.parse(parameters.w) / 2 - 0.2,
+        y: -length21.parse(parameters.h) / 2
       },
       {
-        x: length22.parse(parameters.pad_spacing) / 2,
-        y: -length22.parse(parameters.h) / 2
+        x: length21.parse(parameters.pad_spacing) / 2,
+        y: -length21.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -3565,7 +3586,7 @@ var sodWithoutParsing7 = (parameters) => {
 
 // src/fn/sod123f.ts
 import { z as z29 } from "zod";
-import { length as length23 } from "circuit-json";
+import { length as length22 } from "circuit-json";
 var sod_def8 = z29.object({
   fn: z29.string(),
   num_pins: z29.literal(2).default(2),
@@ -3579,7 +3600,7 @@ var sod123f = (raw_params) => {
   const parameters = sod_def8.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length23.parse(parameters.h),
+    length22.parse(parameters.h),
     0.3
   );
   const silkscreenLine = {
@@ -3588,20 +3609,20 @@ var sod123f = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length23.parse(parameters.p) / 2,
-        y: length23.parse(parameters.h) / 2
+        x: length22.parse(parameters.p) / 2,
+        y: length22.parse(parameters.h) / 2
       },
       {
-        x: -length23.parse(parameters.w) / 2 - 0.2,
-        y: length23.parse(parameters.h) / 2
+        x: -length22.parse(parameters.w) / 2 - 0.2,
+        y: length22.parse(parameters.h) / 2
       },
       {
-        x: -length23.parse(parameters.w) / 2 - 0.2,
-        y: -length23.parse(parameters.h) / 2
+        x: -length22.parse(parameters.w) / 2 - 0.2,
+        y: -length22.parse(parameters.h) / 2
       },
       {
-        x: length23.parse(parameters.p) / 2,
-        y: -length23.parse(parameters.h) / 2
+        x: length22.parse(parameters.p) / 2,
+        y: -length22.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -3645,7 +3666,7 @@ var sodWithoutParsing8 = (parameters) => {
 
 // src/fn/sod123fl.ts
 import { z as z30 } from "zod";
-import { length as length24 } from "circuit-json";
+import { length as length23 } from "circuit-json";
 var sod123FL_def = z30.object({
   fn: z30.string(),
   num_pins: z30.literal(2).default(2),
@@ -3659,7 +3680,7 @@ var sod123fl = (raw_params) => {
   const parameters = sod123FL_def.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length24.parse(parameters.h),
+    length23.parse(parameters.h),
     0.3
   );
   const silkscreenLine = {
@@ -3668,20 +3689,20 @@ var sod123fl = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length24.parse(parameters.p) / 2,
-        y: length24.parse(parameters.h) / 2
+        x: length23.parse(parameters.p) / 2,
+        y: length23.parse(parameters.h) / 2
       },
       {
-        x: -length24.parse(parameters.w) / 2 - 0.2,
-        y: length24.parse(parameters.h) / 2
+        x: -length23.parse(parameters.w) / 2 - 0.2,
+        y: length23.parse(parameters.h) / 2
       },
       {
-        x: -length24.parse(parameters.w) / 2 - 0.2,
-        y: -length24.parse(parameters.h) / 2
+        x: -length23.parse(parameters.w) / 2 - 0.2,
+        y: -length23.parse(parameters.h) / 2
       },
       {
-        x: length24.parse(parameters.p) / 2,
-        y: -length24.parse(parameters.h) / 2
+        x: length23.parse(parameters.p) / 2,
+        y: -length23.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -3725,7 +3746,7 @@ var sodWithoutParsing9 = (parameters) => {
 
 // src/fn/sod723.ts
 import { z as z31 } from "zod";
-import { length as length25 } from "circuit-json";
+import { length as length24 } from "circuit-json";
 var sod_def9 = z31.object({
   fn: z31.string(),
   num_pins: z31.literal(2).default(2),
@@ -3739,7 +3760,7 @@ var sod723 = (raw_params) => {
   const parameters = sod_def9.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length25.parse(parameters.h),
+    length24.parse(parameters.h),
     0.3
   );
   const silkscreenLine = {
@@ -3748,20 +3769,20 @@ var sod723 = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length25.parse(parameters.p) / 2,
-        y: length25.parse(parameters.h) / 2
+        x: length24.parse(parameters.p) / 2,
+        y: length24.parse(parameters.h) / 2
       },
       {
-        x: -length25.parse(parameters.w) / 2 - 0.1,
-        y: length25.parse(parameters.h) / 2
+        x: -length24.parse(parameters.w) / 2 - 0.1,
+        y: length24.parse(parameters.h) / 2
       },
       {
-        x: -length25.parse(parameters.w) / 2 - 0.1,
-        y: -length25.parse(parameters.h) / 2
+        x: -length24.parse(parameters.w) / 2 - 0.1,
+        y: -length24.parse(parameters.h) / 2
       },
       {
-        x: length25.parse(parameters.p) / 2,
-        y: -length25.parse(parameters.h) / 2
+        x: length24.parse(parameters.p) / 2,
+        y: -length24.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -3805,7 +3826,7 @@ var sodWithoutParsing10 = (parameters) => {
 
 // src/fn/sod128.ts
 import { z as z32 } from "zod";
-import { length as length26 } from "circuit-json";
+import { length as length25 } from "circuit-json";
 var sod_def10 = z32.object({
   fn: z32.string(),
   num_pins: z32.literal(2).default(2),
@@ -3819,7 +3840,7 @@ var sod128 = (raw_params) => {
   const parameters = sod_def10.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length26.parse(parameters.h) / 2 + 0.4,
+    length25.parse(parameters.h) / 2 + 0.4,
     0.3
   );
   const silkscreenLine = {
@@ -3828,20 +3849,20 @@ var sod128 = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length26.parse(parameters.p) / 2,
-        y: length26.parse(parameters.h) / 2
+        x: length25.parse(parameters.p) / 2,
+        y: length25.parse(parameters.h) / 2
       },
       {
-        x: -length26.parse(parameters.w) / 2 - 0.2,
-        y: length26.parse(parameters.h) / 2
+        x: -length25.parse(parameters.w) / 2 - 0.2,
+        y: length25.parse(parameters.h) / 2
       },
       {
-        x: -length26.parse(parameters.w) / 2 - 0.2,
-        y: -length26.parse(parameters.h) / 2
+        x: -length25.parse(parameters.w) / 2 - 0.2,
+        y: -length25.parse(parameters.h) / 2
       },
       {
-        x: length26.parse(parameters.p) / 2,
-        y: -length26.parse(parameters.h) / 2
+        x: length25.parse(parameters.p) / 2,
+        y: -length25.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -3899,12 +3920,12 @@ var sot89_3 = (parameters) => {
   const pads = [];
   const padGap = Number.parseFloat(parameters.p);
   const padWidth = Number.parseFloat(parameters.pw);
-  const length45 = Number.parseFloat(parameters.w);
+  const length44 = Number.parseFloat(parameters.w);
   const padHeight = Number.parseFloat(parameters.pl);
   pads.push(
-    rectpad(1, -length45 / 2, padGap, padHeight, padWidth),
-    rectpad(2, -length45 / 2 + (1.5 - 1.3) / 2, 0, 1.5, padWidth),
-    rectpad(3, -length45 / 2, -padGap, padHeight, padWidth)
+    rectpad(1, -length44 / 2, padGap, padHeight, padWidth),
+    rectpad(2, -length44 / 2 + (1.5 - 1.3) / 2, 0, 1.5, padWidth),
+    rectpad(3, -length44 / 2, -padGap, padHeight, padWidth)
   );
   const silkscreenRefText = silkscreenRef(0, 0, 0.3);
   const width = Number.parseFloat(parameters.w) / 2 - 1;
@@ -3944,7 +3965,7 @@ var sot89_5 = (parameters) => {
   const pads = [];
   const padGap = Number.parseFloat(parameters.p);
   const padWidth = Number.parseFloat(parameters.pw);
-  const length45 = Number.parseFloat(parameters.w);
+  const length44 = Number.parseFloat(parameters.w);
   pads.push(
     rectpad(1, -1.85, -1.5, 1.5, 0.7),
     rectpad(2, -1.85, 1.5, 1.5, 0.7),
@@ -4012,16 +4033,16 @@ var sot89 = (raw_params) => {
 
 // src/fn/to220.ts
 import {
-  length as length27
+  length as length26
 } from "circuit-json";
 import { z as z34 } from "zod";
 var to220_def = z34.object({
   fn: z34.string(),
-  p: length27.optional().default("5.0mm"),
-  id: length27.optional().default("1.0mm"),
-  od: length27.optional().default("1.9mm"),
-  w: length27.optional().default("13mm"),
-  h: length27.optional().default("7mm"),
+  p: length26.optional().default("5.0mm"),
+  id: length26.optional().default("1.0mm"),
+  od: length26.optional().default("1.9mm"),
+  w: length26.optional().default("13mm"),
+  h: length26.optional().default("7mm"),
   num_pins: z34.number().optional(),
   string: z34.string().optional()
 });
@@ -4104,7 +4125,7 @@ var to220 = (raw_params) => {
 
 // src/fn/minimelf.ts
 import { z as z35 } from "zod";
-import { length as length28 } from "circuit-json";
+import { length as length27 } from "circuit-json";
 var minimelf_def = z35.object({
   fn: z35.string(),
   num_pins: z35.literal(2).default(2),
@@ -4118,7 +4139,7 @@ var minimelf = (raw_params) => {
   const parameters = minimelf_def.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length28.parse(parameters.h) / 2 + 0.4,
+    length27.parse(parameters.h) / 2 + 0.4,
     0.3
   );
   const silkscreenLine = {
@@ -4127,20 +4148,20 @@ var minimelf = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length28.parse(parameters.p) / 2,
-        y: length28.parse(parameters.h) / 2
+        x: length27.parse(parameters.p) / 2,
+        y: length27.parse(parameters.h) / 2
       },
       {
-        x: -length28.parse(parameters.w) / 2,
-        y: length28.parse(parameters.h) / 2
+        x: -length27.parse(parameters.w) / 2,
+        y: length27.parse(parameters.h) / 2
       },
       {
-        x: -length28.parse(parameters.w) / 2,
-        y: -length28.parse(parameters.h) / 2
+        x: -length27.parse(parameters.w) / 2,
+        y: -length27.parse(parameters.h) / 2
       },
       {
-        x: length28.parse(parameters.p) / 2,
-        y: -length28.parse(parameters.h) / 2
+        x: length27.parse(parameters.p) / 2,
+        y: -length27.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -4180,7 +4201,7 @@ var miniMelfWithoutParsing = (parameters) => {
 
 // src/fn/sod882d.ts
 import { z as z36 } from "zod";
-import { length as length29 } from "circuit-json";
+import { length as length28 } from "circuit-json";
 var sod_def11 = z36.object({
   fn: z36.string(),
   num_pins: z36.literal(2).default(2),
@@ -4194,7 +4215,7 @@ var sod882d = (raw_params) => {
   const parameters = sod_def11.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length29.parse(parameters.h) + 0.1,
+    length28.parse(parameters.h) + 0.1,
     0.3
   );
   const silkscreenLine = {
@@ -4203,20 +4224,20 @@ var sod882d = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length29.parse(parameters.p) / 2 + 0.1,
-        y: length29.parse(parameters.h) / 2
+        x: length28.parse(parameters.p) / 2 + 0.1,
+        y: length28.parse(parameters.h) / 2
       },
       {
-        x: -length29.parse(parameters.w) / 2,
-        y: length29.parse(parameters.h) / 2
+        x: -length28.parse(parameters.w) / 2,
+        y: length28.parse(parameters.h) / 2
       },
       {
-        x: -length29.parse(parameters.w) / 2,
-        y: -length29.parse(parameters.h) / 2
+        x: -length28.parse(parameters.w) / 2,
+        y: -length28.parse(parameters.h) / 2
       },
       {
-        x: length29.parse(parameters.p) / 2 + 0.1,
-        y: -length29.parse(parameters.h) / 2
+        x: length28.parse(parameters.p) / 2 + 0.1,
+        y: -length28.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -4260,7 +4281,7 @@ var sodWithoutParsing12 = (parameters) => {
 
 // src/fn/melf.ts
 import { z as z37 } from "zod";
-import { length as length30 } from "circuit-json";
+import { length as length29 } from "circuit-json";
 var melf_def = z37.object({
   fn: z37.string(),
   num_pins: z37.literal(2).default(2),
@@ -4274,7 +4295,7 @@ var melf = (raw_params) => {
   const parameters = melf_def.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length30.parse(parameters.h),
+    length29.parse(parameters.h),
     0.3
   );
   const silkscreenLine = {
@@ -4283,20 +4304,20 @@ var melf = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length30.parse(parameters.p) / 2,
-        y: length30.parse(parameters.h) / 2
+        x: length29.parse(parameters.p) / 2,
+        y: length29.parse(parameters.h) / 2
       },
       {
-        x: -length30.parse(parameters.w) / 2,
-        y: length30.parse(parameters.h) / 2
+        x: -length29.parse(parameters.w) / 2,
+        y: length29.parse(parameters.h) / 2
       },
       {
-        x: -length30.parse(parameters.w) / 2,
-        y: -length30.parse(parameters.h) / 2
+        x: -length29.parse(parameters.w) / 2,
+        y: -length29.parse(parameters.h) / 2
       },
       {
-        x: length30.parse(parameters.p) / 2,
-        y: -length30.parse(parameters.h) / 2
+        x: length29.parse(parameters.p) / 2,
+        y: -length29.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -4340,7 +4361,7 @@ var melfWithoutParsing = (parameters) => {
 
 // src/fn/micromelf.ts
 import { z as z38 } from "zod";
-import { length as length31 } from "circuit-json";
+import { length as length30 } from "circuit-json";
 var micromelf_def = z38.object({
   fn: z38.string(),
   num_pins: z38.literal(2).default(2),
@@ -4354,7 +4375,7 @@ var micromelf = (raw_params) => {
   const parameters = micromelf_def.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length31.parse(parameters.h),
+    length30.parse(parameters.h),
     0.3
   );
   const silkscreenLine = {
@@ -4363,20 +4384,20 @@ var micromelf = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length31.parse(parameters.p) / 2,
-        y: length31.parse(parameters.h) / 2
+        x: length30.parse(parameters.p) / 2,
+        y: length30.parse(parameters.h) / 2
       },
       {
-        x: -length31.parse(parameters.w) / 2 - 0.1,
-        y: length31.parse(parameters.h) / 2
+        x: -length30.parse(parameters.w) / 2 - 0.1,
+        y: length30.parse(parameters.h) / 2
       },
       {
-        x: -length31.parse(parameters.w) / 2 - 0.1,
-        y: -length31.parse(parameters.h) / 2
+        x: -length30.parse(parameters.w) / 2 - 0.1,
+        y: -length30.parse(parameters.h) / 2
       },
       {
-        x: length31.parse(parameters.p) / 2,
-        y: -length31.parse(parameters.h) / 2
+        x: length30.parse(parameters.p) / 2,
+        y: -length30.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -4420,7 +4441,7 @@ var microMelfWithoutParsing = (parameters) => {
 
 // src/fn/sma.ts
 import { z as z39 } from "zod";
-import { length as length32 } from "circuit-json";
+import { length as length31 } from "circuit-json";
 var sma_def = z39.object({
   fn: z39.string(),
   num_pins: z39.literal(2).default(2),
@@ -4434,7 +4455,7 @@ var sma = (raw_params) => {
   const parameters = sma_def.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length32.parse(parameters.h) / 2 + 0.5,
+    length31.parse(parameters.h) / 2 + 0.5,
     0.3
   );
   const silkscreenLine = {
@@ -4443,20 +4464,20 @@ var sma = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length32.parse(parameters.p) / 2,
-        y: length32.parse(parameters.h) / 2
+        x: length31.parse(parameters.p) / 2,
+        y: length31.parse(parameters.h) / 2
       },
       {
-        x: -length32.parse(parameters.w) / 2 - 0.5,
-        y: length32.parse(parameters.h) / 2
+        x: -length31.parse(parameters.w) / 2 - 0.5,
+        y: length31.parse(parameters.h) / 2
       },
       {
-        x: -length32.parse(parameters.w) / 2 - 0.5,
-        y: -length32.parse(parameters.h) / 2
+        x: -length31.parse(parameters.w) / 2 - 0.5,
+        y: -length31.parse(parameters.h) / 2
       },
       {
-        x: length32.parse(parameters.p) / 2,
-        y: -length32.parse(parameters.h) / 2
+        x: length31.parse(parameters.p) / 2,
+        y: -length31.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -4499,7 +4520,7 @@ var smaWithoutParsing = (parameters) => {
 
 // src/fn/smf.ts
 import { z as z40 } from "zod";
-import { length as length33 } from "circuit-json";
+import { length as length32 } from "circuit-json";
 var smf_def = z40.object({
   fn: z40.string(),
   num_pins: z40.literal(2).default(2),
@@ -4513,7 +4534,7 @@ var smf = (raw_params) => {
   const parameters = smf_def.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length33.parse(parameters.h) - 0.5,
+    length32.parse(parameters.h) - 0.5,
     0.3
   );
   const silkscreenLine = {
@@ -4522,20 +4543,20 @@ var smf = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length33.parse(parameters.p) / 2,
-        y: length33.parse(parameters.h) / 2
+        x: length32.parse(parameters.p) / 2,
+        y: length32.parse(parameters.h) / 2
       },
       {
-        x: -length33.parse(parameters.w) / 2,
-        y: length33.parse(parameters.h) / 2
+        x: -length32.parse(parameters.w) / 2,
+        y: length32.parse(parameters.h) / 2
       },
       {
-        x: -length33.parse(parameters.w) / 2,
-        y: -length33.parse(parameters.h) / 2
+        x: -length32.parse(parameters.w) / 2,
+        y: -length32.parse(parameters.h) / 2
       },
       {
-        x: length33.parse(parameters.p) / 2,
-        y: -length33.parse(parameters.h) / 2
+        x: length32.parse(parameters.p) / 2,
+        y: -length32.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -4579,7 +4600,7 @@ var smfWithoutParsing = (parameters) => {
 
 // src/fn/smb.ts
 import { z as z41 } from "zod";
-import { length as length34 } from "circuit-json";
+import { length as length33 } from "circuit-json";
 var smb_def = z41.object({
   fn: z41.string(),
   num_pins: z41.literal(2).default(2),
@@ -4593,7 +4614,7 @@ var smb = (raw_params) => {
   const parameters = smb_def.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length34.parse(parameters.h) / 2 + 0.5,
+    length33.parse(parameters.h) / 2 + 0.5,
     0.3
   );
   const silkscreenLine = {
@@ -4602,20 +4623,20 @@ var smb = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length34.parse(parameters.p) / 2,
-        y: length34.parse(parameters.h) / 2
+        x: length33.parse(parameters.p) / 2,
+        y: length33.parse(parameters.h) / 2
       },
       {
-        x: -length34.parse(parameters.w) / 2 - 0.1,
-        y: length34.parse(parameters.h) / 2
+        x: -length33.parse(parameters.w) / 2 - 0.1,
+        y: length33.parse(parameters.h) / 2
       },
       {
-        x: -length34.parse(parameters.w) / 2 - 0.1,
-        y: -length34.parse(parameters.h) / 2
+        x: -length33.parse(parameters.w) / 2 - 0.1,
+        y: -length33.parse(parameters.h) / 2
       },
       {
-        x: length34.parse(parameters.p) / 2,
-        y: -length34.parse(parameters.h) / 2
+        x: length33.parse(parameters.p) / 2,
+        y: -length33.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -4659,7 +4680,7 @@ var smbWithoutParsing = (parameters) => {
 
 // src/fn/smc.ts
 import { z as z42 } from "zod";
-import { length as length35 } from "circuit-json";
+import { length as length34 } from "circuit-json";
 var smc_def = z42.object({
   fn: z42.string(),
   num_pins: z42.literal(2).default(2),
@@ -4678,20 +4699,20 @@ var smc = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length35.parse(parameters.p) / 2,
-        y: length35.parse(parameters.h) / 2 - 0.8
+        x: length34.parse(parameters.p) / 2,
+        y: length34.parse(parameters.h) / 2 - 0.8
       },
       {
-        x: -length35.parse(parameters.w) / 2 - 0.8,
-        y: length35.parse(parameters.h) / 2 - 0.8
+        x: -length34.parse(parameters.w) / 2 - 0.8,
+        y: length34.parse(parameters.h) / 2 - 0.8
       },
       {
-        x: -length35.parse(parameters.w) / 2 - 0.8,
-        y: -length35.parse(parameters.h) / 2 + 0.8
+        x: -length34.parse(parameters.w) / 2 - 0.8,
+        y: -length34.parse(parameters.h) / 2 + 0.8
       },
       {
-        x: length35.parse(parameters.p) / 2,
-        y: -length35.parse(parameters.h) / 2 + 0.8
+        x: length34.parse(parameters.p) / 2,
+        y: -length34.parse(parameters.h) / 2 + 0.8
       }
     ],
     stroke_width: 0.1,
@@ -5161,17 +5182,17 @@ var to92s = (raw_params) => {
 
 // src/fn/jst.ts
 import {
-  length as length36
+  length as length35
 } from "circuit-json";
 import { z as z46 } from "zod";
 var jst_def = z46.object({
   fn: z46.string(),
-  p: length36.optional().default("2.2mm"),
-  id: length36.optional().default("0.70mm"),
-  pw: length36.optional().default("1.20mm"),
-  pl: length36.optional().default("1.20mm"),
-  w: length36.optional().default("6mm"),
-  h: length36.optional().default("5mm")
+  p: length35.optional().default("2.2mm"),
+  id: length35.optional().default("0.70mm"),
+  pw: length35.optional().default("1.20mm"),
+  pl: length35.optional().default("1.20mm"),
+  w: length35.optional().default("6mm"),
+  h: length35.optional().default("5mm")
 });
 var jst = (raw_params) => {
   const parameters = jst_def.parse(raw_params);
@@ -5208,7 +5229,7 @@ var jst = (raw_params) => {
 
 // src/fn/sod110.ts
 import { z as z47 } from "zod";
-import { length as length37 } from "circuit-json";
+import { length as length36 } from "circuit-json";
 var sod_def12 = z47.object({
   fn: z47.string(),
   num_pins: z47.literal(2).default(2),
@@ -5222,7 +5243,7 @@ var sod110 = (raw_params) => {
   const parameters = sod_def12.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length37.parse(parameters.h) / 2 + 0.5,
+    length36.parse(parameters.h) / 2 + 0.5,
     0.3
   );
   const silkscreenLine = {
@@ -5231,20 +5252,20 @@ var sod110 = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length37.parse(parameters.p) / 2,
-        y: length37.parse(parameters.h) / 2
+        x: length36.parse(parameters.p) / 2,
+        y: length36.parse(parameters.h) / 2
       },
       {
-        x: -length37.parse(parameters.w) / 2,
-        y: length37.parse(parameters.h) / 2
+        x: -length36.parse(parameters.w) / 2,
+        y: length36.parse(parameters.h) / 2
       },
       {
-        x: -length37.parse(parameters.w) / 2,
-        y: -length37.parse(parameters.h) / 2
+        x: -length36.parse(parameters.w) / 2,
+        y: -length36.parse(parameters.h) / 2
       },
       {
-        x: length37.parse(parameters.p) / 2,
-        y: -length37.parse(parameters.h) / 2
+        x: length36.parse(parameters.p) / 2,
+        y: -length36.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -5287,7 +5308,7 @@ var sodWithoutParsing13 = (parameters) => {
 
 // src/fn/vssop.ts
 import { z as z48 } from "zod";
-import { length as length38 } from "circuit-json";
+import { length as length37 } from "circuit-json";
 var getDefaultValues = (num_pins) => {
   switch (num_pins) {
     case 8:
@@ -5329,11 +5350,11 @@ var vssop_def = z48.object({
 var vssop = (raw_params) => {
   const parameters = vssop_def.parse(raw_params);
   const defaults = getDefaultValues(parameters.num_pins);
-  const w = length38.parse(parameters.w || defaults.w);
-  const h = length38.parse(parameters.h || defaults.h);
-  const p = length38.parse(parameters.p || defaults.p);
-  const pl = length38.parse(parameters.pl || defaults.pl);
-  const pw = length38.parse(parameters.pw || defaults.pw);
+  const w = length37.parse(parameters.w || defaults.w);
+  const h = length37.parse(parameters.h || defaults.h);
+  const p = length37.parse(parameters.p || defaults.p);
+  const pl = length37.parse(parameters.pl || defaults.pl);
+  const pw = length37.parse(parameters.pw || defaults.pw);
   const pads = [];
   for (let i = 0; i < parameters.num_pins; i++) {
     const { x, y } = getVssopPadCoord(parameters.num_pins, i + 1, w, p);
@@ -5408,14 +5429,14 @@ var getVssopPadCoord = (pinCount, pn, w, p) => {
   const col = pn <= half ? -1 : 1;
   const row = (half - 1) / 2 - rowIndex;
   return {
-    x: col * length38.parse(pinCount === 8 ? "1.8mm" : "2.2mm"),
+    x: col * length37.parse(pinCount === 8 ? "1.8mm" : "2.2mm"),
     y: row * p
   };
 };
 
 // src/fn/msop.ts
 import { z as z49 } from "zod";
-import { length as length39 } from "circuit-json";
+import { length as length38 } from "circuit-json";
 var getDefaultValues2 = (num_pins) => {
   switch (num_pins) {
     case 10:
@@ -5468,18 +5489,18 @@ var getMsopCoords = (pinCount, pn, w, p) => {
   const col = pn <= half ? -1 : 1;
   const row = (half - 1) / 2 - rowIndex;
   return {
-    x: col * length39.parse("2mm"),
+    x: col * length38.parse("2mm"),
     y: row * p
   };
 };
 var msop = (raw_params) => {
   const parameters = msop_def.parse(raw_params);
   const defaults = getDefaultValues2(parameters.num_pins);
-  const w = length39.parse(parameters.w || defaults.w);
-  const h = length39.parse(parameters.h || defaults.h);
-  const p = length39.parse(parameters.p || defaults.p);
-  const pl = length39.parse(parameters.pl || defaults.pl);
-  const pw = length39.parse(parameters.pw || defaults.pw);
+  const w = length38.parse(parameters.w || defaults.w);
+  const h = length38.parse(parameters.h || defaults.h);
+  const p = length38.parse(parameters.p || defaults.p);
+  const pl = length38.parse(parameters.pl || defaults.pl);
+  const pw = length38.parse(parameters.pw || defaults.pw);
   const pads = [];
   for (let i = 0; i < parameters.num_pins; i++) {
     const { x, y } = getMsopCoords(parameters.num_pins, i + 1, w, p);
@@ -5551,7 +5572,7 @@ var msop = (raw_params) => {
 
 // src/fn/sod323w.ts
 import { z as z50 } from "zod";
-import { length as length40 } from "circuit-json";
+import { length as length39 } from "circuit-json";
 var sod323w_def = z50.object({
   fn: z50.string(),
   num_pins: z50.literal(2).default(2),
@@ -5565,7 +5586,7 @@ var sod323w = (raw_params) => {
   const parameters = sod323w_def.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length40.parse(parameters.h),
+    length39.parse(parameters.h),
     0.3
   );
   const silkscreenLine = {
@@ -5574,20 +5595,20 @@ var sod323w = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length40.parse(parameters.pad_spacing) / 2,
-        y: length40.parse(parameters.h) / 2
+        x: length39.parse(parameters.pad_spacing) / 2,
+        y: length39.parse(parameters.h) / 2
       },
       {
-        x: -length40.parse(parameters.w) / 2 - 0.2,
-        y: length40.parse(parameters.h) / 2
+        x: -length39.parse(parameters.w) / 2 - 0.2,
+        y: length39.parse(parameters.h) / 2
       },
       {
-        x: -length40.parse(parameters.w) / 2 - 0.2,
-        y: -length40.parse(parameters.h) / 2
+        x: -length39.parse(parameters.w) / 2 - 0.2,
+        y: -length39.parse(parameters.h) / 2
       },
       {
-        x: length40.parse(parameters.pad_spacing) / 2,
-        y: -length40.parse(parameters.h) / 2
+        x: length39.parse(parameters.pad_spacing) / 2,
+        y: -length39.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -5631,7 +5652,7 @@ var sodWithoutParsing14 = (parameters) => {
 
 // src/fn/sod323fl.ts
 import { z as z51 } from "zod";
-import { length as length41 } from "circuit-json";
+import { length as length40 } from "circuit-json";
 var sod323FL_def = z51.object({
   fn: z51.string(),
   num_pins: z51.literal(2).default(2),
@@ -5645,7 +5666,7 @@ var sod323fl = (raw_params) => {
   const parameters = sod323FL_def.parse(raw_params);
   const silkscreenRefText = silkscreenRef(
     0,
-    length41.parse(parameters.h),
+    length40.parse(parameters.h),
     0.3
   );
   const silkscreenLine = {
@@ -5654,20 +5675,20 @@ var sod323fl = (raw_params) => {
     pcb_component_id: "",
     route: [
       {
-        x: length41.parse(parameters.pad_spacing) / 2,
-        y: length41.parse(parameters.h) / 2
+        x: length40.parse(parameters.pad_spacing) / 2,
+        y: length40.parse(parameters.h) / 2
       },
       {
-        x: -length41.parse(parameters.w) / 2 - 0.2,
-        y: length41.parse(parameters.h) / 2
+        x: -length40.parse(parameters.w) / 2 - 0.2,
+        y: length40.parse(parameters.h) / 2
       },
       {
-        x: -length41.parse(parameters.w) / 2 - 0.2,
-        y: -length41.parse(parameters.h) / 2
+        x: -length40.parse(parameters.w) / 2 - 0.2,
+        y: -length40.parse(parameters.h) / 2
       },
       {
-        x: length41.parse(parameters.pad_spacing) / 2,
-        y: -length41.parse(parameters.h) / 2
+        x: length40.parse(parameters.pad_spacing) / 2,
+        y: -length40.parse(parameters.h) / 2
       }
     ],
     stroke_width: 0.1,
@@ -5711,7 +5732,7 @@ var sodWithoutParsing15 = (parameters) => {
 
 // src/fn/son.ts
 import { z as z52 } from "zod";
-import { length as length42 } from "circuit-json";
+import { length as length41 } from "circuit-json";
 var son_def = z52.object({
   fn: z52.string(),
   num_pins: z52.literal(8).default(8),
@@ -5730,13 +5751,13 @@ var son = (raw_params) => {
     raw_params.ep = true;
   }
   const parameters = son_def.parse(raw_params);
-  const w = length42.parse(parameters.w);
-  const h = length42.parse(parameters.h);
-  const p = length42.parse(parameters.p);
-  const pl = length42.parse(parameters.pl);
-  const pw = length42.parse(parameters.pw);
-  const epw = length42.parse(parameters.epw);
-  const eph = length42.parse(parameters.eph);
+  const w = length41.parse(parameters.w);
+  const h = length41.parse(parameters.h);
+  const p = length41.parse(parameters.p);
+  const pl = length41.parse(parameters.pl);
+  const pw = length41.parse(parameters.pw);
+  const epw = length41.parse(parameters.epw);
+  const eph = length41.parse(parameters.eph);
   const pads = [];
   for (let i = 0; i < parameters.num_pins; i++) {
     const { x, y } = getSonPadCoord(parameters.num_pins, i + 1, w, p);
@@ -5814,18 +5835,18 @@ var getSonPadCoord = (num_pins, pn, w, p) => {
   const col = pn <= half ? -1 : 1;
   const row = (half - 1) / 2 - rowIndex;
   return {
-    x: col * length42.parse("1.4mm"),
+    x: col * length41.parse("1.4mm"),
     y: row * p
   };
 };
 
 // src/fn/solderjumper.ts
-import { length as length43 } from "circuit-json";
+import { length as length42 } from "circuit-json";
 var solderjumper = (params) => {
   const { num_pins, bridged, p = 2.54, pw = 1.5, ph = 1.5 } = params;
-  const padSpacing = length43.parse(p);
-  const padWidth = length43.parse(pw);
-  const padHeight = length43.parse(ph);
+  const padSpacing = length42.parse(p);
+  const padWidth = length42.parse(pw);
+  const padHeight = length42.parse(ph);
   const traceWidth = Math.min(padHeight / 4, 0.5);
   const pads = [];
   for (let i = 0; i < num_pins; i++) {
@@ -5992,15 +6013,15 @@ var potentiometer = (raw_params) => {
 
 // src/fn/electrolytic.ts
 import {
-  length as length44
+  length as length43
 } from "circuit-json";
 import { z as z54 } from "zod";
 var electrolytic_def = z54.object({
   fn: z54.string(),
-  p: length44.optional().default("7.5mm"),
-  id: length44.optional().default("1mm"),
-  od: length44.optional().default("2mm"),
-  d: length44.optional().default("10.5mm")
+  p: length43.optional().default("7.5mm"),
+  id: length43.optional().default("1mm"),
+  od: length43.optional().default("2mm"),
+  d: length43.optional().default("10.5mm")
 });
 var generate_circle_arcs = (centerX, centerY, radius, cut, cutHeight) => {
   const topArc = [];