@tscircuit/core 0.0.364 → 0.0.366

package/dist/index.d.ts

@@ -1,5 +1,5 @@
 import * as _tscircuit_props from '@tscircuit/props';
-import { subcircuitGroupProps, AutorouterConfig, traceProps, SupplierPartNumbers, SchematicPortArrangement, groupProps, boardProps, capacitorProps, chipProps, diodeProps, jumperProps, ledProps, powerSourceProps, resistorProps, constraintProps, fabricationNotePathProps, fabricationNoteTextProps, footprintProps, subcircuitProps, holeProps, pcbKeepoutProps, netAliasProps, platedHoleProps, silkscreenCircleProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, silkscreenLineProps, smtPadProps, traceHintProps, viaProps, batteryProps, pinHeaderProps, resonatorProps, inductorProps, potentiometerProps, pushButtonProps, crystalProps, transistorProps, mosfetProps, switchProps, CapacitorProps, ChipProps, DiodeProps, ResistorProps, ManualEditEvent, manual_edits_file, ChipConnections } from '@tscircuit/props';
+import { subcircuitGroupProps, AutorouterConfig, traceProps, SupplierPartNumbers, SchematicPortArrangement, groupProps, boardProps, capacitorProps, chipProps, diodeProps, jumperProps, ledProps, powerSourceProps, resistorProps, constraintProps, fabricationNotePathProps, fabricationNoteTextProps, footprintProps, subcircuitProps, holeProps, pcbKeepoutProps, netAliasProps, platedHoleProps, silkscreenCircleProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, silkscreenLineProps, smtPadProps, traceHintProps, viaProps, batteryProps, pinHeaderProps, resonatorProps, inductorProps, potentiometerProps, pushButtonProps, crystalProps, transistorProps, mosfetProps, switchProps, CapacitorProps, ChipProps, DiodeProps, ResistorProps, ManualEditEvent, ManualEditsFile, ChipConnections, manual_edits_file } from '@tscircuit/props';
 import React, { ReactElement, DetailedHTMLProps, SVGProps } from 'react';
 export { createElement } from 'react';
 import * as zod from 'zod';
@@ -5596,7 +5596,7 @@ declare class PlatedHole extends PrimitiveComponent<typeof platedHoleProps> {
     isPcbPrimitive: boolean;
     get config(): {
         componentName: string;
-        zodProps: zod.ZodUnion<[zod.ZodObject<zod.objectUtil.extendShape<Omit<{
+        zodProps: zod.ZodEffects<zod.ZodUnion<[zod.ZodObject<zod.objectUtil.extendShape<Omit<{
             pcbX: zod.ZodOptional<zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>>;
             pcbY: zod.ZodOptional<zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>>;
             pcbRotation: zod.ZodOptional<zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>>;
@@ -5649,19 +5649,23 @@ declare class PlatedHole extends PrimitiveComponent<typeof platedHoleProps> {
             shape: zod.ZodLiteral<"oval">;
             outerWidth: zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>;
             outerHeight: zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>;
-            holeWidth: zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>;
-            holeHeight: zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>;
+            holeWidth: zod.ZodEffects<zod.ZodType<string | number, zod.ZodTypeDef, string | number>, number | undefined, string | number>;
+            holeHeight: zod.ZodEffects<zod.ZodType<string | number, zod.ZodTypeDef, string | number>, number | undefined, string | number>;
+            innerWidth: zod.ZodOptional<zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>>;
+            innerHeight: zod.ZodOptional<zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>>;
             portHints: zod.ZodOptional<zod.ZodArray<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, "many">>;
         }>, "strip", zod.ZodTypeAny, {
             shape: "oval";
             outerWidth: number;
             outerHeight: number;
-            holeWidth: number;
-            holeHeight: number;
             pcbX?: number | undefined;
             pcbY?: number | undefined;
             name?: string | undefined;
             portHints?: (string | number)[] | undefined;
+            holeWidth?: number | undefined;
+            holeHeight?: number | undefined;
+            innerWidth?: number | undefined;
+            innerHeight?: number | undefined;
         }, {
             shape: "oval";
             outerWidth: string | number;
@@ -5672,6 +5676,8 @@ declare class PlatedHole extends PrimitiveComponent<typeof platedHoleProps> {
             pcbY?: string | number | undefined;
             name?: string | undefined;
             portHints?: (string | number)[] | undefined;
+            innerWidth?: string | number | undefined;
+            innerHeight?: string | number | undefined;
         }>, zod.ZodObject<zod.objectUtil.extendShape<Omit<{
             pcbX: zod.ZodOptional<zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>>;
             pcbY: zod.ZodOptional<zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>>;
@@ -5690,19 +5696,23 @@ declare class PlatedHole extends PrimitiveComponent<typeof platedHoleProps> {
             shape: zod.ZodLiteral<"pill">;
             outerWidth: zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>;
             outerHeight: zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>;
-            holeWidth: zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>;
-            holeHeight: zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>;
+            holeWidth: zod.ZodEffects<zod.ZodType<string | number, zod.ZodTypeDef, string | number>, number | undefined, string | number>;
+            holeHeight: zod.ZodEffects<zod.ZodType<string | number, zod.ZodTypeDef, string | number>, number | undefined, string | number>;
+            innerWidth: zod.ZodOptional<zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>>;
+            innerHeight: zod.ZodOptional<zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>>;
             portHints: zod.ZodOptional<zod.ZodArray<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, "many">>;
         }>, "strip", zod.ZodTypeAny, {
             shape: "pill";
             outerWidth: number;
             outerHeight: number;
-            holeWidth: number;
-            holeHeight: number;
             pcbX?: number | undefined;
             pcbY?: number | undefined;
             name?: string | undefined;
             portHints?: (string | number)[] | undefined;
+            holeWidth?: number | undefined;
+            holeHeight?: number | undefined;
+            innerWidth?: number | undefined;
+            innerHeight?: number | undefined;
         }, {
             shape: "pill";
             outerWidth: string | number;
@@ -5713,6 +5723,8 @@ declare class PlatedHole extends PrimitiveComponent<typeof platedHoleProps> {
             pcbY?: string | number | undefined;
             name?: string | undefined;
             portHints?: (string | number)[] | undefined;
+            innerWidth?: string | number | undefined;
+            innerHeight?: string | number | undefined;
         }>, zod.ZodEffects<zod.ZodObject<zod.objectUtil.extendShape<Omit<{
             pcbX: zod.ZodOptional<zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>>;
             pcbY: zod.ZodOptional<zod.ZodEffects<zod.ZodUnion<[zod.ZodString, zod.ZodNumber]>, number, string | number>>;
@@ -5779,7 +5791,93 @@ declare class PlatedHole extends PrimitiveComponent<typeof platedHoleProps> {
             portHints?: (string | number)[] | undefined;
             holeShape?: "circle" | undefined;
             padShape?: "rect" | undefined;
-        }>]>;
+        }>]>, {
+            shape: "circle";
+            holeDiameter: number;
+            outerDiameter: number;
+            pcbX?: number | undefined;
+            pcbY?: number | undefined;
+            name?: string | undefined;
+            portHints?: (string | number)[] | undefined;
+        } | {
+            shape: "oval";
+            outerWidth: number;
+            outerHeight: number;
+            pcbX?: number | undefined;
+            pcbY?: number | undefined;
+            name?: string | undefined;
+            portHints?: (string | number)[] | undefined;
+            holeWidth?: number | undefined;
+            holeHeight?: number | undefined;
+            innerWidth?: number | undefined;
+            innerHeight?: number | undefined;
+        } | {
+            shape: "pill";
+            outerWidth: number;
+            outerHeight: number;
+            pcbX?: number | undefined;
+            pcbY?: number | undefined;
+            name?: string | undefined;
+            portHints?: (string | number)[] | undefined;
+            holeWidth?: number | undefined;
+            holeHeight?: number | undefined;
+            innerWidth?: number | undefined;
+            innerHeight?: number | undefined;
+        } | {
+            holeDiameter: number;
+            rectPadWidth: number;
+            rectPadHeight: number;
+            pcbX?: number | undefined;
+            pcbY?: number | undefined;
+            name?: string | undefined;
+            shape?: "circularHoleWithRectPad" | undefined;
+            portHints?: (string | number)[] | undefined;
+            holeShape?: "circle" | undefined;
+            padShape?: "rect" | undefined;
+        }, {
+            shape: "circle";
+            holeDiameter: string | number;
+            outerDiameter: string | number;
+            pcbX?: string | number | undefined;
+            pcbY?: string | number | undefined;
+            name?: string | undefined;
+            portHints?: (string | number)[] | undefined;
+        } | {
+            shape: "oval";
+            outerWidth: string | number;
+            outerHeight: string | number;
+            holeWidth: string | number;
+            holeHeight: string | number;
+            pcbX?: string | number | undefined;
+            pcbY?: string | number | undefined;
+            name?: string | undefined;
+            portHints?: (string | number)[] | undefined;
+            innerWidth?: string | number | undefined;
+            innerHeight?: string | number | undefined;
+        } | {
+            shape: "pill";
+            outerWidth: string | number;
+            outerHeight: string | number;
+            holeWidth: string | number;
+            holeHeight: string | number;
+            pcbX?: string | number | undefined;
+            pcbY?: string | number | undefined;
+            name?: string | undefined;
+            portHints?: (string | number)[] | undefined;
+            innerWidth?: string | number | undefined;
+            innerHeight?: string | number | undefined;
+        } | {
+            holeDiameter: string | number;
+            rectPadWidth: string | number;
+            rectPadHeight: string | number;
+            pcbX?: string | number | undefined;
+            pcbY?: string | number | undefined;
+            name?: string | undefined;
+            shape?: "circularHoleWithRectPad" | undefined;
+            portHints?: (string | number)[] | undefined;
+            holeShape?: "circle" | undefined;
+            padShape?: "rect" | undefined;
+        }>;
     };
     getAvailablePcbLayers(): string[];
     getPcbSize(): {
@@ -11322,8 +11420,8 @@ declare const useResistor: <PropsFromHook extends Omit<ResistorProps, "name"> |
 declare const applyEditEventsToManualEditsFile: ({ circuitJson, editEvents, manualEditsFile, }: {
     circuitJson: CircuitJson;
     editEvents: ManualEditEvent[];
-    manualEditsFile: z.infer<typeof manual_edits_file>;
-}) => z.infer<typeof manual_edits_file>;
+    manualEditsFile: ManualEditsFile;
+}) => ManualEditsFile;
 
 /**
  * This function can only be called in the PcbTraceRender phase or later
@@ -11382,18 +11480,24 @@ type PolarizedSel = Record<`C${Nums40}` | `L${Nums40}` | `LED${Nums40}` | `D${Nu
 }>;
 type CommonNetNames = "VCC" | "GND" | "VDD" | "PWR" | "V5" | "V3_3";
 type TransistorSel = Record<`Q${Nums40}`, Record<TransistorPinNames, string>>;
-type JumperSel = Record<`J${Nums40}`, Record<PinNumbers100 | CommonPinNames, string>>;
+type JumperSel = Record<`J${Nums40}` | `CN${Nums40}`, Record<PinNumbers100 | CommonPinNames, string>>;
 type ChipSel = Record<`U${Nums40}`, Record<CommonPinNames, string> & ChipFnSel>;
 type NetSel = Record<"net", Record<CommonNetNames, string>>;
-type ConnectionSel = Record<`CN${Nums40}`, Record<CommonPinNames, string>>;
-type SubcircuitSel = Record<"subcircuit", Record<`S${Nums40}`, SelWithoutSubcircuit>>;
-type SelWithoutSubcircuit = NonPolarizedSel & PolarizedSel & TransistorSel & JumperSel & ChipSel & SwSel & NetSel & ConnectionSel;
+type ExplicitModuleSel = Record<"subcircuit" | "module" | "group", Record<`S${Nums40}` | `M${Nums40}` | `G${Nums40}`, SelWithoutSubcircuit>>;
+type GenericConnectionsAndSelectorsSel = Record<string, <CMP_FN extends (props: any) => any>(component: CMP_FN) => CMP_FN extends (props: infer P) => any ? P extends {
+    connections: infer CN;
+} ? CN : P extends {
+    selectors: infer SEL;
+} ? SEL extends Record<string, Record<string, string>> ? {
+    [K in keyof SEL]: SEL[K] extends Record<string, string> ? SEL[K] : never;
+} : never : never : never>;
+type SelWithoutSubcircuit = NonPolarizedSel & PolarizedSel & TransistorSel & JumperSel & ChipSel & SwSel & NetSel & GenericConnectionsAndSelectorsSel;
 type UnionToIntersection<U> = (U extends any ? (x: U) => void : never) extends (x: infer I) => void ? I : never;
 type ChipFn<T extends ChipProps<any>> = (props: T) => any;
 type ChipFnSel = <T extends ChipFn<any> | string>(chipFn?: T) => UnionToIntersection<T extends ChipFn<any> ? ChipConnections<T> : T extends string ? {
     [K in T]: string;
 } : never>;
-type Sel = SubcircuitSel & SelWithoutSubcircuit;
+type Sel = ExplicitModuleSel & SelWithoutSubcircuit;
 declare const sel: Sel;
 
 type AutorouterCompleteEvent = {
@@ -11501,4 +11605,4 @@ declare module "react/jsx-runtime" {
     }
 }
 
-export { type AsyncEffect, type AutorouterCompleteEvent, type AutorouterErrorEvent, type AutorouterEvent, type AutorouterProgressEvent, type AutoroutingEndEvent, type AutoroutingErrorEvent, type AutoroutingProgressEvent, type AutoroutingStartEvent, Battery, Board, Capacitor, Chip, Circuit, type ComponentWithPins, Constraint, Crystal, Diode, FabricationNotePath, FabricationNoteText, Footprint, type GenericLocalAutorouter, Group, Hole, type IRenderable, Inductor, Jumper, Keepout, Led, Mosfet, Net, NetAlias, NormalComponent, type Obstacle, PinHeader, type PinLabelSpec, PlatedHole, Port, Potentiometer, PowerSource, PrimitiveComponent, Project, PushButton, type RenderPhase, type RenderPhaseFn, type RenderPhaseFunctions, type RenderPhaseStates, Renderable, Resistor, Resonator, RootCircuit, type RootCircuitEventName, type Sel, SilkscreenCircle, SilkscreenLine, SilkscreenPath, SilkscreenRect, SilkscreenText, type SimpleRouteConnection, type SimpleRouteJson, type SimplifiedPcbTrace, SmtPad, Subcircuit, Switch, Trace, TraceHint, Transistor, Via, applyEditEventsToManualEditsFile, applyPcbEditEventsToManualEditsFile, applySchematicEditEventsToManualEditsFile, createUseComponent, getPhaseTimingsFromRenderEvents, getSimpleRouteJsonFromCircuitJson, orderedRenderPhases, sel, useCapacitor, useChip, useDiode, useLed, useRenderedCircuit, useResistor };
+export { type AsyncEffect, type AutorouterCompleteEvent, type AutorouterErrorEvent, type AutorouterEvent, type AutorouterProgressEvent, type AutoroutingEndEvent, type AutoroutingErrorEvent, type AutoroutingProgressEvent, type AutoroutingStartEvent, Battery, Board, Capacitor, Chip, Circuit, type ComponentWithPins, Constraint, Crystal, Diode, FabricationNotePath, FabricationNoteText, Footprint, type GenericConnectionsAndSelectorsSel, type GenericLocalAutorouter, Group, Hole, type IRenderable, Inductor, Jumper, Keepout, Led, Mosfet, Net, NetAlias, NormalComponent, type Obstacle, PinHeader, type PinLabelSpec, PlatedHole, Port, Potentiometer, PowerSource, PrimitiveComponent, Project, PushButton, type RenderPhase, type RenderPhaseFn, type RenderPhaseFunctions, type RenderPhaseStates, Renderable, Resistor, Resonator, RootCircuit, type RootCircuitEventName, type Sel, SilkscreenCircle, SilkscreenLine, SilkscreenPath, SilkscreenRect, SilkscreenText, type SimpleRouteConnection, type SimpleRouteJson, type SimplifiedPcbTrace, SmtPad, Subcircuit, Switch, Trace, TraceHint, Transistor, Via, applyEditEventsToManualEditsFile, applyPcbEditEventsToManualEditsFile, applySchematicEditEventsToManualEditsFile, createUseComponent, getPhaseTimingsFromRenderEvents, getSimpleRouteJsonFromCircuitJson, orderedRenderPhases, sel, useCapacitor, useChip, useDiode, useLed, useRenderedCircuit, useResistor };

package/dist/index.js

@@ -5404,10 +5404,49 @@ var TraceHint = class extends PrimitiveComponent {
   }
 };
 
-// lib/utils/edit-events/apply-edit-events-to-manual-edits-file.ts
+// lib/utils/edit-events/apply-pcb-edit-events-to-manual-edits-file.ts
 import "zod";
 import { su } from "@tscircuit/soup-util";
-var applyEditEventsToManualEditsFile = ({
+var applyPcbEditEventsToManualEditsFile = ({
+  circuitJson,
+  editEvents,
+  manualEditsFile
+}) => {
+  const updatedManualEditsFile = {
+    ...manualEditsFile,
+    pcb_placements: [...manualEditsFile.pcb_placements ?? []]
+  };
+  for (const editEvent of editEvents) {
+    if (editEvent.edit_event_type === "edit_pcb_component_location") {
+      const { pcb_component_id, new_center } = editEvent;
+      const pcb_component = su(circuitJson).pcb_component.get(pcb_component_id);
+      if (!pcb_component) continue;
+      const source_component = su(circuitJson).source_component.get(
+        pcb_component.source_component_id
+      );
+      if (!source_component) continue;
+      const existingPlacementIndex = updatedManualEditsFile.pcb_placements?.findIndex(
+        (p) => p.selector === source_component.name
+      );
+      const newPlacement = {
+        selector: source_component.name,
+        center: new_center,
+        relative_to: "group_center"
+      };
+      if (existingPlacementIndex >= 0) {
+        updatedManualEditsFile.pcb_placements[existingPlacementIndex] = newPlacement;
+      } else {
+        updatedManualEditsFile.pcb_placements.push(newPlacement);
+      }
+    }
+  }
+  return updatedManualEditsFile;
+};
+
+// lib/utils/edit-events/apply-schematic-edit-events-to-manual-edits-file.ts
+import { su as su2 } from "@tscircuit/soup-util";
+import "zod";
+var applySchematicEditEventsToManualEditsFile = ({
   circuitJson,
   editEvents,
   manualEditsFile
@@ -5419,11 +5458,11 @@ var applyEditEventsToManualEditsFile = ({
   for (const editEvent of editEvents) {
     if (editEvent.edit_event_type === "edit_schematic_component_location") {
       const { schematic_component_id, new_center } = editEvent;
-      const schematic_component2 = su(circuitJson).schematic_component.get(
+      const schematic_component2 = su2(circuitJson).schematic_component.get(
         schematic_component_id
       );
       if (!schematic_component2) continue;
-      const source_component = su(circuitJson).source_component.get(
+      const source_component = su2(circuitJson).source_component.get(
         schematic_component2.source_component_id
       );
       if (!source_component) continue;
@@ -5445,9 +5484,39 @@ var applyEditEventsToManualEditsFile = ({
   return updatedManualEditsFile;
 };
 
+// lib/utils/edit-events/apply-edit-events-to-manual-edits-file.ts
+var applyEditEventsToManualEditsFile = ({
+  circuitJson,
+  editEvents,
+  manualEditsFile
+}) => {
+  const schematicEditEvents = editEvents.filter(
+    (event) => event.edit_event_type === "edit_schematic_component_location"
+  );
+  const pcbEditEvents = editEvents.filter(
+    (event) => event.edit_event_type === "edit_pcb_component_location"
+  );
+  let updatedManualEditsFile = manualEditsFile;
+  if (schematicEditEvents.length > 0) {
+    updatedManualEditsFile = applySchematicEditEventsToManualEditsFile({
+      circuitJson,
+      editEvents: schematicEditEvents,
+      manualEditsFile: updatedManualEditsFile
+    });
+  }
+  if (pcbEditEvents.length > 0) {
+    updatedManualEditsFile = applyPcbEditEventsToManualEditsFile({
+      circuitJson,
+      editEvents: pcbEditEvents,
+      manualEditsFile: updatedManualEditsFile
+    });
+  }
+  return updatedManualEditsFile;
+};
+
 // lib/utils/autorouting/getSimpleRouteJsonFromCircuitJson.ts
 import { getObstaclesFromSoup as getObstaclesFromSoup2 } from "@tscircuit/infgrid-ijump-astar";
-import { su as su2 } from "@tscircuit/soup-util";
+import { su as su3 } from "@tscircuit/soup-util";
 import {
   getFullConnectivityMapFromCircuitJson as getFullConnectivityMapFromCircuitJson2
 } from "circuit-json-to-connectivity-map";
@@ -5479,7 +5548,7 @@ var getSimpleRouteJsonFromCircuitJson = ({
   minTraceWidth = 0.1
 }) => {
   if (!db && circuitJson) {
-    db = su2(circuitJson);
+    db = su3(circuitJson);
   }
   if (!db) {
     throw new Error("db or circuitJson is required");
@@ -5498,7 +5567,7 @@ var getSimpleRouteJsonFromCircuitJson = ({
     (e) => !subcircuit_id || "subcircuit_id" in e && relevantSubcircuitIds.has(e.subcircuit_id)
   );
   const board = db.pcb_board.list()[0];
-  db = su2(subcircuitElements);
+  db = su3(subcircuitElements);
   const connMap = getFullConnectivityMapFromCircuitJson2(subcircuitElements);
   const obstacles = getObstaclesFromSoup2(
     [
@@ -7354,7 +7423,7 @@ var Switch = class extends NormalComponent {
 };
 
 // lib/RootCircuit.ts
-import { su as su3 } from "@tscircuit/soup-util";
+import { su as su4 } from "@tscircuit/soup-util";
 import { isValidElement as isValidElement2 } from "react";
 import { identity as identity4 } from "transformation-matrix";
 
@@ -7362,7 +7431,7 @@ import { identity as identity4 } from "transformation-matrix";
 var package_default = {
   name: "@tscircuit/core",
   type: "module",
-  version: "0.0.363",
+  version: "0.0.365",
   types: "dist/index.d.ts",
   main: "dist/index.js",
   module: "dist/index.js",
@@ -7419,7 +7488,7 @@ var package_default = {
     "@tscircuit/circuit-json-util": "^0.0.45",
     "@tscircuit/infgrid-ijump-astar": "^0.0.33",
     "@tscircuit/math-utils": "^0.0.12",
-    "@tscircuit/props": "^0.0.167",
+    "@tscircuit/props": "^0.0.170",
     "@tscircuit/schematic-autolayout": "^0.0.6",
     "@tscircuit/soup-util": "^0.0.41",
     "circuit-json": "^0.0.153",
@@ -7454,7 +7523,7 @@ var RootCircuit = class {
   _hasRenderedAtleastOnce = false;
   constructor() {
     this.children = [];
-    this.db = su3([]);
+    this.db = su4([]);
     this.root = this;
   }
   add(componentOrElm) {
@@ -7752,13 +7821,27 @@ var sel = new Proxy(
           }
           return `.${prop1} > .${prop2}`;
         },
-        // This handles function calls like sel.U1(MyChip)
+        // This handles function calls like...
+        // - sel.U1(MyChip)
+        // - sel.U1(({ selectors: { U1: { GND: "GND", VCC: "VCC" } } }) => ...)
+        // - sel.U1(({ connections: { GND: "GND", VCC: "VCC" } }) => ...)
         apply: (target, _2, args) => {
           return new Proxy(
             {},
             {
-              get: (_3, pinName) => {
-                return `.${prop1} > .${pinName}`;
+              get: (_3, pinOrSubComponentName) => {
+                const pinResult = `.${prop1} > .${pinOrSubComponentName}`;
+                if (prop1.startsWith("U")) {
+                  return pinResult;
+                }
+                return new Proxy(new String(pinResult), {
+                  get: (_4, nestedProp) => {
+                    if (typeof nestedProp === "symbol" || nestedProp === "toString") {
+                      return () => pinResult;
+                    }
+                    return `.${prop1} > .${pinOrSubComponentName} > .${nestedProp}`;
+                  }
+                });
               }
             }
           );
@@ -7768,86 +7851,6 @@ var sel = new Proxy(
   }
 );
 
-// lib/utils/edit-events/apply-pcb-edit-events-to-manual-edits-file.ts
-import "zod";
-import { su as su4 } from "@tscircuit/soup-util";
-var applyPcbEditEventsToManualEditsFile = ({
-  circuitJson,
-  editEvents,
-  manualEditsFile
-}) => {
-  const updatedManualEditsFile = {
-    ...manualEditsFile,
-    pcb_placements: [...manualEditsFile.pcb_placements ?? []]
-  };
-  for (const editEvent of editEvents) {
-    if (editEvent.edit_event_type === "edit_pcb_component_location") {
-      const { pcb_component_id, new_center } = editEvent;
-      const pcb_component = su4(circuitJson).pcb_component.get(pcb_component_id);
-      if (!pcb_component) continue;
-      const source_component = su4(circuitJson).source_component.get(
-        pcb_component.source_component_id
-      );
-      if (!source_component) continue;
-      const existingPlacementIndex = updatedManualEditsFile.pcb_placements?.findIndex(
-        (p) => p.selector === source_component.name
-      );
-      const newPlacement = {
-        selector: source_component.name,
-        center: new_center,
-        relative_to: "group_center"
-      };
-      if (existingPlacementIndex >= 0) {
-        updatedManualEditsFile.pcb_placements[existingPlacementIndex] = newPlacement;
-      } else {
-        updatedManualEditsFile.pcb_placements.push(newPlacement);
-      }
-    }
-  }
-  return updatedManualEditsFile;
-};
-
-// lib/utils/edit-events/apply-schematic-edit-events-to-manual-edits-file.ts
-import { su as su5 } from "@tscircuit/soup-util";
-import "zod";
-var applySchematicEditEventsToManualEditsFile = ({
-  circuitJson,
-  editEvents,
-  manualEditsFile
-}) => {
-  const updatedManualEditsFile = {
-    ...manualEditsFile,
-    schematic_placements: [...manualEditsFile.schematic_placements ?? []]
-  };
-  for (const editEvent of editEvents) {
-    if (editEvent.edit_event_type === "edit_schematic_component_location") {
-      const { schematic_component_id, new_center } = editEvent;
-      const schematic_component2 = su5(circuitJson).schematic_component.get(
-        schematic_component_id
-      );
-      if (!schematic_component2) continue;
-      const source_component = su5(circuitJson).source_component.get(
-        schematic_component2.source_component_id
-      );
-      if (!source_component) continue;
-      const existingPlacementIndex = updatedManualEditsFile.schematic_placements?.findIndex(
-        (p) => p.selector === source_component.name
-      );
-      const newPlacement = {
-        selector: source_component.name,
-        center: new_center,
-        relative_to: "group_center"
-      };
-      if (existingPlacementIndex >= 0) {
-        updatedManualEditsFile.schematic_placements[existingPlacementIndex] = newPlacement;
-      } else {
-        updatedManualEditsFile.schematic_placements.push(newPlacement);
-      }
-    }
-  }
-  return updatedManualEditsFile;
-};
-
 // lib/index.ts
 import { createElement } from "react";
 

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@tscircuit/core",
   "type": "module",
-  "version": "0.0.364",
+  "version": "0.0.366",
   "types": "dist/index.d.ts",
   "main": "dist/index.js",
   "module": "dist/index.js",
@@ -58,7 +58,7 @@
     "@tscircuit/circuit-json-util": "^0.0.45",
     "@tscircuit/infgrid-ijump-astar": "^0.0.33",
     "@tscircuit/math-utils": "^0.0.12",
-    "@tscircuit/props": "^0.0.167",
+    "@tscircuit/props": "^0.0.170",
     "@tscircuit/schematic-autolayout": "^0.0.6",
     "@tscircuit/soup-util": "^0.0.41",
     "circuit-json": "^0.0.153",