@tscircuit/core 0.0.2162 → 0.0.2163

package/dist/index.js

@@ -3666,53 +3666,6 @@ function fillPolygonWithRects(polygon, options = {}) {
   return rects;
 }
 
-// lib/utils/obstacles/generateApproximatingRects.ts
-function generateApproximatingRects(rotatedRect, numRects = 2) {
-  const { center, width, height, rotation: rotation5 } = rotatedRect;
-  const rects = [];
-  const angleRad = rotation5 * Math.PI / 180;
-  const cosAngle = Math.cos(angleRad);
-  const sinAngle = Math.sin(angleRad);
-  const normalizedRotation = (rotation5 % 360 + 360) % 360;
-  const sliceAlongWidth = height <= width ? normalizedRotation >= 45 && normalizedRotation < 135 || normalizedRotation >= 225 && normalizedRotation < 315 : normalizedRotation >= 135 && normalizedRotation < 225 || normalizedRotation >= 315 || normalizedRotation < 45;
-  if (sliceAlongWidth) {
-    const sliceWidth = width / numRects;
-    for (let i2 = 0; i2 < numRects; i2++) {
-      const x2 = (i2 - numRects / 2 + 0.5) * sliceWidth;
-      const rotatedX = -x2 * cosAngle;
-      const rotatedY = -x2 * sinAngle;
-      const coverageWidth = sliceWidth * 1.1;
-      const coverageHeight = Math.abs(height * cosAngle) + Math.abs(sliceWidth * sinAngle);
-      rects.push({
-        center: {
-          x: center.x + rotatedX,
-          y: center.y + rotatedY
-        },
-        width: coverageWidth,
-        height: coverageHeight
-      });
-    }
-  } else {
-    const sliceHeight = height / numRects;
-    for (let i2 = 0; i2 < numRects; i2++) {
-      const y2 = (i2 - numRects / 2 + 0.5) * sliceHeight;
-      const rotatedX = -y2 * sinAngle;
-      const rotatedY = y2 * cosAngle;
-      const coverageWidth = Math.abs(width * cosAngle) + Math.abs(sliceHeight * sinAngle);
-      const coverageHeight = sliceHeight * 1.1;
-      rects.push({
-        center: {
-          x: center.x + rotatedX,
-          y: center.y + rotatedY
-        },
-        width: coverageWidth,
-        height: coverageHeight
-      });
-    }
-  }
-  return rects;
-}
-
 // lib/utils/obstacles/getAxisAlignedRectFromPolygon.ts
 var AXIS_ALIGNED_RECT_TOLERANCE_MM = 1e-3;
 var getAxisAlignedRectFromPolygon = (points) => {
@@ -3822,43 +3775,34 @@ var getObstaclesFromPcbKeepoutOutline = (keepout, componentId) => {
     const deltaY = end.y - start.y;
     const segmentLength = Math.hypot(deltaX, deltaY);
     if (!Number.isFinite(segmentLength) || segmentLength === 0) continue;
-    const approximatingRects = generateApproximatingRects({
+    obstacles.push({
+      obstacleId: `${keepout.pcb_keepout_id}_segment_${segmentIndex}`,
+      componentId,
+      type: "rect",
+      layers: keepout.layers,
       center: {
         x: (start.x + end.x) / 2,
         y: (start.y + end.y) / 2
       },
       width: segmentLength,
       height: stroke_width,
-      rotation: Math.atan2(deltaY, deltaX) * 180 / Math.PI
+      ccwRotationDegrees: Math.atan2(deltaY, deltaX) * 180 / Math.PI,
+      connectedTo: []
     });
-    for (const [approximationIndex, rect] of approximatingRects.entries()) {
-      obstacles.push({
-        obstacleId: `${keepout.pcb_keepout_id}_segment_${segmentIndex}_rect_${approximationIndex}`,
-        componentId,
-        type: "rect",
-        layers: keepout.layers,
-        ...rect,
-        connectedTo: []
-      });
-    }
   }
   const isClosed = outline.length > 1 && outline[0].x === outline.at(-1)?.x && outline[0].y === outline.at(-1)?.y;
   const joinPoints = isClosed ? outline.slice(0, -1) : outline;
   for (const [joinIndex, point6] of joinPoints.entries()) {
-    const approximatingRects = fillCircleWithRects(
-      { center: point6, radius: stroke_width / 2 },
-      { rectHeight: stroke_width / 4 }
-    );
-    for (const [approximationIndex, rect] of approximatingRects.entries()) {
-      obstacles.push({
-        obstacleId: `${keepout.pcb_keepout_id}_join_${joinIndex}_rect_${approximationIndex}`,
-        componentId,
-        type: "rect",
-        layers: keepout.layers,
-        ...rect,
-        connectedTo: []
-      });
-    }
+    obstacles.push({
+      obstacleId: `${keepout.pcb_keepout_id}_join_${joinIndex}`,
+      componentId,
+      type: "rect",
+      layers: keepout.layers,
+      center: point6,
+      width: stroke_width,
+      height: stroke_width,
+      connectedTo: []
+    });
   }
   return obstacles;
 };
@@ -119177,7 +119121,7 @@ var RoutingPhasePreparationError = class extends Error {
 var package_default = {
   name: "@tscircuit/core",
   type: "module",
-  version: "0.0.2161",
+  version: "0.0.2162",
   types: "dist/index.d.ts",
   main: "dist/index.js",
   module: "dist/index.js",
@@ -119214,7 +119158,7 @@ var package_default = {
     "@tscircuit/bga-fanout-solver": "github:tscircuit/bga-fanout-solver#247c835cb8d69b65e53891dcf869731079415b39",
     "@tscircuit/bus-lanes-solver": "https://jscdn.tscircuit.com/@tscircuit/bus-lanes-solver/0.0.21.tgz",
     "@tscircuit/cableprinter": "^0.0.6",
-    "@tscircuit/capacity-autorouter": "^0.0.982",
+    "@tscircuit/capacity-autorouter": "^0.0.985",
     "@tscircuit/checks": "^0.0.256",
     "@tscircuit/circuit-json-util": "^0.0.122",
     "@tscircuit/common": "^0.0.20",

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@tscircuit/core",
   "type": "module",
-  "version": "0.0.2162",
+  "version": "0.0.2163",
   "types": "dist/index.d.ts",
   "main": "dist/index.js",
   "module": "dist/index.js",
@@ -38,7 +38,7 @@
     "@tscircuit/bga-fanout-solver": "github:tscircuit/bga-fanout-solver#247c835cb8d69b65e53891dcf869731079415b39",
     "@tscircuit/bus-lanes-solver": "https://jscdn.tscircuit.com/@tscircuit/bus-lanes-solver/0.0.21.tgz",
     "@tscircuit/cableprinter": "^0.0.6",
-    "@tscircuit/capacity-autorouter": "^0.0.982",
+    "@tscircuit/capacity-autorouter": "^0.0.985",
     "@tscircuit/checks": "^0.0.256",
     "@tscircuit/circuit-json-util": "^0.0.122",
     "@tscircuit/common": "^0.0.20",