@tscircuit/core 0.0.2119 → 0.0.2120

package/dist/index.d.ts

@@ -1,7 +1,7 @@
 import * as circuit_json from 'circuit-json';
 import { PcbGroup, PcbTraceError, PcbPlacementError, PcbManualEditConflictWarning, PcbViaClearanceError, PcbVia as PcbVia$1, LayerRef, AnyCircuitElement, Size, PcbTrace as PcbTrace$1, PcbTraceRoutePoint, AnySourceComponent, SourcePort, PcbComponent, SchematicPort, SchematicComponent, SimulationVoltageSource, SimulationCurrentSource, PcbSilkscreenGraphic, PcbSolderPastePolygon, SourceBus, RouteHintPoint, PcbBoard, SchematicSheet as SchematicSheet$1, SchematicGraphic as SchematicGraphic$1, SimulationExperiment, SimulationParameterSweep, PcbBend as PcbBend$1, PcbStiffener as PcbStiffener$1, PcbSoldermaskOpening as PcbSoldermaskOpening$1, CircuitJson } from 'circuit-json';
 import * as _tscircuit_props from '@tscircuit/props';
-import { FanoutTracePath, PlatformConfig, autoroutingPhaseProps, traceProps, netProps, AutoroutingPhaseProps, AutorouterProp, subcircuitGroupProps, AutorouterConfig, PcbSx, portProps, PinAttributeMap, SupplierPartNumbers, CadModelProp, SchematicPortArrangement, groupProps, platedHoleProps, BoardOutlinePoint, boardProps, subcircuitProps, subpanelProps, capacitorProps, antennaProps, chipProps, pinoutProps, diodeProps, fuseProps, jumperProps, interconnectProps, solderjumperProps, ledProps, powerSourceProps, voltageSourceProps, currentSourceProps, ammeterProps, resistorProps, constraintProps, drcCheckProps, fabricationNoteRectProps, fabricationNotePathProps, fabricationNoteTextProps, fabricationNoteDimensionProps, pcbNoteLineProps, pcbNoteRectProps, pcbNoteTextProps, pcbNotePathProps, pcbNoteDimensionProps, footprintProps, breakoutProps, breakoutPointProps, holeProps, pcbKeepoutProps, netLabelProps, cadmodelProps, cadassemblyProps, courtyardCircleProps, courtyardOutlineProps, courtyardRectProps, silkscreenCircleProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, silkscreenLineProps, silkscreenGraphicProps, smtPadProps, fiducialProps, busProps, differentialPairProps, traceHintProps, viaProps, copperPourProps, copperTextProps, cutoutProps, assemblyDeviceProps, assemblyMotorProps, assemblyScreenProps, assemblySubassemblyProps, assemblyPartProps, assemblyReferenceSurfaceProps, enclosureCutoutApertureProps, enclosureFdmBoxProps, batteryProps, pinHeaderProps, resonatorProps, inductorProps, potentiometerProps, pushButtonProps, crystalProps, CrystalPinLabels, transistorProps, mosfetProps, opampProps, OpAmpPinLabels, switchProps, SwitchProps, testpointProps, schematicTextProps, schematicLineProps, schematicRectProps, schematicArcProps, schematicCircleProps, schematicPathProps, schematicBoxProps, schematicSymbolProps, schematicSectionProps, schematicSheetProps, schematicGraphicProps, schematicTableProps, schematicRowProps, schematicCellProps, symbolProps, analogSimulationProps, analogTransientSimulationProps, analogDcOperatingPointSimulationProps, analogDcSweepSimulationProps, analogAcSweepSimulationProps, analogSweepParameterProps, voltageProbeProps, spicemodelProps, pcbBendProps, pcbStiffenerProps, pcbSoldermaskOpeningProps, assemblyPrintedPartProps, assemblyCableProps, AnalogTransientSimulationProps, AnalogDcSweepSimulationProps, AnalogAcSweepSimulationProps, AnalogSweepParameterProps, AssemblyCablePropsInput, AssemblySubassemblyPropsInput, AssemblyDevicePropsInput, AssemblyMotorPropsInput, AssemblyPartPropsInput, AssemblyPrintedPartPropsInput, AssemblyScreenPropsInput, EnclosureCutoutApertureProps, EnclosureFdmBoxProps, CapacitorProps, ChipProps, DiodeProps, ResistorProps, ManualEditEvent, ManualEditsFile, ChipConnections, manual_edits_file } from '@tscircuit/props';
+import { FanoutTracePath, PlatformConfig, autoroutingPhaseProps, traceProps, netProps, AutoroutingPhaseProps, AutorouterProp, subcircuitGroupProps, AutorouterConfig, PcbSx, portProps, PinAttributeMap, SupplierPartNumbers, CadModelProp, SchematicPortArrangement, groupProps, platedHoleProps, BoardOutlinePoint, boardProps, subcircuitProps, subpanelProps, capacitorProps, antennaProps, chipProps, pinoutProps, diodeProps, fuseProps, jumperProps, interconnectProps, solderjumperProps, ledProps, powerSourceProps, voltageSourceProps, currentSourceProps, ammeterProps, resistorProps, constraintProps, drcCheckProps, fabricationNoteRectProps, fabricationNotePathProps, fabricationNoteTextProps, fabricationNoteDimensionProps, pcbNoteLineProps, pcbNoteRectProps, pcbNoteTextProps, pcbNotePathProps, pcbNoteDimensionProps, footprintProps, breakoutProps, breakoutPointProps, holeProps, pcbKeepoutProps, netLabelProps, cadmodelProps, cadassemblyProps, courtyardCircleProps, courtyardOutlineProps, courtyardRectProps, silkscreenCircleProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, silkscreenLineProps, silkscreenGraphicProps, smtPadProps, fiducialProps, busProps, differentialPairProps, traceHintProps, viaProps, copperPourProps, copperTextProps, cutoutProps, assemblyDeviceProps, assemblyMotorProps, assemblyScreenProps, assemblySubassemblyProps, assemblyPartProps, assemblyReferenceSurfaceProps, enclosureCutoutApertureProps, enclosureFdmBoxProps, batteryProps, pinHeaderProps, resonatorProps, inductorProps, potentiometerProps, pushButtonProps, crystalProps, CrystalPinLabels, transistorProps, mosfetProps, opampProps, OpAmpPinLabels, switchProps, SwitchProps, testpointProps, schematicTextProps, schematicLineProps, schematicRectProps, schematicArcProps, schematicCircleProps, schematicPathProps, schematicBoxProps, schematicSymbolProps, schematicSectionProps, schematicSheetProps, schematicGraphicProps, schematicTableProps, schematicRowProps, schematicCellProps, symbolProps, analogSimulationProps, analogTransientSimulationProps, analogDcOperatingPointSimulationProps, analogDcSweepSimulationProps, analogAcSweepSimulationProps, analogSweepParameterProps, pcbReturnCurrentSimulationProps, voltageProbeProps, spicemodelProps, pcbBendProps, pcbStiffenerProps, pcbSoldermaskOpeningProps, assemblyPrintedPartProps, assemblyCableProps, AnalogTransientSimulationProps, AnalogDcSweepSimulationProps, AnalogAcSweepSimulationProps, AnalogSweepParameterProps, AssemblyCablePropsInput, AssemblySubassemblyPropsInput, AssemblyDevicePropsInput, AssemblyMotorPropsInput, AssemblyPartPropsInput, AssemblyPrintedPartPropsInput, AssemblyScreenPropsInput, EnclosureCutoutApertureProps, EnclosureFdmBoxProps, PcbReturnCurrentSimulationProps, CapacitorProps, ChipProps, DiodeProps, ResistorProps, ManualEditEvent, ManualEditsFile, ChipConnections, manual_edits_file } from '@tscircuit/props';
 export { FanoutTracePath, fanoutTracePath, kicadFootprintStrings } from '@tscircuit/props';
 import * as react from 'react';
 import react__default, { ReactElement, ReactNode, Attributes } from 'react';
@@ -194771,9 +194771,9 @@ declare class AnalogSimulation extends PrimitiveComponent<typeof analogSimulatio
     doInitialSimulationRender(): void;
 }
 
-type SimulationExperimentId = SimulationExperiment["simulation_experiment_id"];
+type SimulationExperimentId$1 = SimulationExperiment["simulation_experiment_id"];
 declare abstract class AnalogAnalysisSimulation<PropsSchema extends ZodType> extends PrimitiveComponent<PropsSchema> {
-    simulation_experiment_id: SimulationExperimentId | null;
+    simulation_experiment_id: SimulationExperimentId$1 | null;
     protected abstract insertSimulationExperiment(): SimulationExperiment | null;
     getSpiceEngineName(): string | undefined;
     usesIndependentGraphAxes(): boolean;
@@ -195421,6 +195421,28 @@ declare class AnalogSweepParameter extends PrimitiveComponent<typeof analogSweep
     doInitialSimulationRender(): void;
 }
 
+type SimulationExperimentId = SimulationExperiment["simulation_experiment_id"];
+/** Declares a pending experiment; running an EM solver is a separate operation. */
+declare class PcbReturnCurrentSimulation extends PrimitiveComponent<typeof pcbReturnCurrentSimulationProps> {
+    simulation_experiment_id: SimulationExperimentId | null;
+    get config(): {
+        componentName: string;
+        zodProps: zod.ZodObject<{
+            name: zod.ZodOptional<zod.ZodString>;
+            children: zod.ZodOptional<zod.ZodType<react.ReactNode, zod.ZodTypeDef, react.ReactNode>>;
+        }, "strict", zod.ZodTypeAny, {
+            name?: string | undefined;
+            children?: react.ReactNode;
+        }, {
+            name?: string | undefined;
+            children?: react.ReactNode;
+        }>;
+    };
+    doInitialSimulationRender(): void;
+    updateSimulationRender(): void;
+    removeSimulationRender(): void;
+}
+
 declare class VoltageProbe extends PrimitiveComponent<typeof voltageProbeProps> {
     simulation_voltage_probe_id: string | null;
     schematic_voltage_probe_id: string | null;
@@ -204277,6 +204299,10 @@ declare const enclosure: {
     };
 };
 
+declare const simulation: {
+    readonly pcbreturncurrentsimulation: react.FunctionComponent<PcbReturnCurrentSimulationProps>;
+};
+
 declare function resolveStaticFileImport(path: string, platform?: PlatformConfig): Promise<string>;
 
 declare class RootCircuit extends IsolatedCircuit {
@@ -206014,6 +206040,7 @@ interface TscircuitElements {
     analogdcsweepsimulation: _tscircuit_props.AnalogDcSweepSimulationProps;
     analogacsweepsimulation: _tscircuit_props.AnalogAcSweepSimulationProps;
     analogsweepparameter: _tscircuit_props.AnalogSweepParameterProps;
+    pcbreturncurrentsimulation: _tscircuit_props.PcbReturnCurrentSimulationProps;
     spicemodel: _tscircuit_props.SpiceModelProps;
     fiducial: _tscircuit_props.FiducialProps;
     jscad: any;
@@ -206036,4 +206063,4 @@ declare module "react/jsx-runtime" {
     }
 }
 
-export { Ammeter, AnalogAcSweepSimulation, AnalogAnalysisSimulation, AnalogDcOperatingPointSimulation, AnalogDcSweepSimulation, AnalogSimulation, AnalogSweepParameter, AnalogTransientSimulation, Antenna, AssemblyCable, type AssemblyCableJsxProps, type AssemblyCadAssemblyJsxProps, AssemblyDevice, type AssemblyDeviceJsxProps, AssemblyMotor, type AssemblyMotorJsxProps, AssemblyPart, type AssemblyPartJsxProps, AssemblyPrintedPart, type AssemblyPrintedPartJsxProps, AssemblyReferenceSurface, AssemblyScreen, type AssemblyScreenJsxProps, AssemblySubassembly, type AssemblySubassemblyJsxProps, type AsyncEffect, type AutorouterCompleteEvent, type AutorouterErrorEvent, type AutorouterEvent, type AutorouterProgressEvent, type AutoroutingCacheDisabledReason, type AutoroutingCacheStatus, type AutoroutingEndEvent, type AutoroutingErrorEvent, type AutoroutingExecutionMetadata, AutoroutingPhase, type AutoroutingProgressEvent, type AutoroutingStartEvent, Battery, Board, Breakout, BreakoutPoint, Bus, CadAssembly, CadModel, Capacitor, Chip, Circuit, type CircuitJsonMetadata, type ComponentWithPins, Connector, Constraint, CopperPour, CopperText, CourtyardCircle, CourtyardOutline, CourtyardRect, Crystal, CurrentSource, Cutout, type DebugLogOutputEvent, DifferentialPair, Diode, DrcCheck, EnclosureCutoutAperture, EnclosureFdmBox, FabricationNoteDimension, FabricationNotePath, FabricationNoteRect, FabricationNoteText, Breakout as Fanout, BreakoutPoint as FanoutPoint, Fiducial, Footprint, Fuse, type GenericConnectionsAndSelectorsSel, type GenericLocalAutorouter, Group, Hole, type IIsolatedCircuit, type IRenderable, type IRootCircuit, Inductor, Interconnect, IsolatedCircuit, Jumper, Keepout, Led, type LocalCacheEngine, Mosfet, MountedBoard, Net, NetLabel, NormalComponent, type Obstacle, OpAmp, type PackingEndEvent, type PackingErrorEvent, type PackingStartEvent, Panel, PcbBend, type PcbGroupId, PcbNoteDimension, PcbNoteLine, PcbNotePath, PcbNoteRect, PcbNoteText, PcbSoldermaskOpening, PcbStiffener, PcbTrace, PcbVia, PinHeader, type PinLabelSpec, Pinout, PlatedHole, Port, Potentiometer, PowerSource, PrimitiveComponent, Project, PushButton, type RenderPhase, type RenderPhaseFn, type RenderPhaseFunctions, type RenderPhaseStates, Renderable, Resistor, Resonator, RootCircuit, type RootCircuitEventName, SOLVERS, SchematicArc, SchematicBox, SchematicCell, SchematicCircle, SchematicGraphic, SchematicLine, SchematicPath, SchematicRect, SchematicRow, SchematicSection, SchematicSheet, SchematicSymbol, SchematicTable, SchematicText, type Sel, SilkscreenCircle, SilkscreenGraphic, SilkscreenLine, SilkscreenPath, SilkscreenRect, SilkscreenText, type SimpleRouteBounds, type SimpleRouteBus, type SimpleRouteBusTermination, type SimpleRouteConnection, type SimpleRouteDifferentialPair, type SimpleRouteJson, type SimpleRoutePoint, type SimplifiedPcbTrace, type SingleLayerConnectionPoint, SmtPad, SolderJumper, type SolverEndedEvent, type SolverName, type SolverStartedEvent, SpiceModel, type SrjConnectionName, Subcircuit, Subpanel, Switch, SymbolComponent as Symbol, TestPoint, Trace, TraceHint, Transistor, Via, VoltageProbe, VoltageSource, analog, applyEditEvents, applyEditEventsToManualEditsFile, applyPcbEditEventsToManualEditsFile, applySchematicEditEventsToManualEditsFile, assembly, createUseComponent, enclosure, getPhaseTimingsFromRenderEvents, getSimpleRouteJsonFromCircuitJson, normalizePinLabels, orderedRenderPhases, renderPhaseIndexMap, resolveStaticFileImport, sel, unrouteCircuitJson, useCapacitor, useChip, useDiode, useLed, useRenderedCircuit, useResistor };
+export { Ammeter, AnalogAcSweepSimulation, AnalogAnalysisSimulation, AnalogDcOperatingPointSimulation, AnalogDcSweepSimulation, AnalogSimulation, AnalogSweepParameter, AnalogTransientSimulation, Antenna, AssemblyCable, type AssemblyCableJsxProps, type AssemblyCadAssemblyJsxProps, AssemblyDevice, type AssemblyDeviceJsxProps, AssemblyMotor, type AssemblyMotorJsxProps, AssemblyPart, type AssemblyPartJsxProps, AssemblyPrintedPart, type AssemblyPrintedPartJsxProps, AssemblyReferenceSurface, AssemblyScreen, type AssemblyScreenJsxProps, AssemblySubassembly, type AssemblySubassemblyJsxProps, type AsyncEffect, type AutorouterCompleteEvent, type AutorouterErrorEvent, type AutorouterEvent, type AutorouterProgressEvent, type AutoroutingCacheDisabledReason, type AutoroutingCacheStatus, type AutoroutingEndEvent, type AutoroutingErrorEvent, type AutoroutingExecutionMetadata, AutoroutingPhase, type AutoroutingProgressEvent, type AutoroutingStartEvent, Battery, Board, Breakout, BreakoutPoint, Bus, CadAssembly, CadModel, Capacitor, Chip, Circuit, type CircuitJsonMetadata, type ComponentWithPins, Connector, Constraint, CopperPour, CopperText, CourtyardCircle, CourtyardOutline, CourtyardRect, Crystal, CurrentSource, Cutout, type DebugLogOutputEvent, DifferentialPair, Diode, DrcCheck, EnclosureCutoutAperture, EnclosureFdmBox, FabricationNoteDimension, FabricationNotePath, FabricationNoteRect, FabricationNoteText, Breakout as Fanout, BreakoutPoint as FanoutPoint, Fiducial, Footprint, Fuse, type GenericConnectionsAndSelectorsSel, type GenericLocalAutorouter, Group, Hole, type IIsolatedCircuit, type IRenderable, type IRootCircuit, Inductor, Interconnect, IsolatedCircuit, Jumper, Keepout, Led, type LocalCacheEngine, Mosfet, MountedBoard, Net, NetLabel, NormalComponent, type Obstacle, OpAmp, type PackingEndEvent, type PackingErrorEvent, type PackingStartEvent, Panel, PcbBend, type PcbGroupId, PcbNoteDimension, PcbNoteLine, PcbNotePath, PcbNoteRect, PcbNoteText, PcbReturnCurrentSimulation, PcbSoldermaskOpening, PcbStiffener, PcbTrace, PcbVia, PinHeader, type PinLabelSpec, Pinout, PlatedHole, Port, Potentiometer, PowerSource, PrimitiveComponent, Project, PushButton, type RenderPhase, type RenderPhaseFn, type RenderPhaseFunctions, type RenderPhaseStates, Renderable, Resistor, Resonator, RootCircuit, type RootCircuitEventName, SOLVERS, SchematicArc, SchematicBox, SchematicCell, SchematicCircle, SchematicGraphic, SchematicLine, SchematicPath, SchematicRect, SchematicRow, SchematicSection, SchematicSheet, SchematicSymbol, SchematicTable, SchematicText, type Sel, SilkscreenCircle, SilkscreenGraphic, SilkscreenLine, SilkscreenPath, SilkscreenRect, SilkscreenText, type SimpleRouteBounds, type SimpleRouteBus, type SimpleRouteBusTermination, type SimpleRouteConnection, type SimpleRouteDifferentialPair, type SimpleRouteJson, type SimpleRoutePoint, type SimplifiedPcbTrace, type SingleLayerConnectionPoint, SmtPad, SolderJumper, type SolverEndedEvent, type SolverName, type SolverStartedEvent, SpiceModel, type SrjConnectionName, Subcircuit, Subpanel, Switch, SymbolComponent as Symbol, TestPoint, Trace, TraceHint, Transistor, Via, VoltageProbe, VoltageSource, analog, applyEditEvents, applyEditEventsToManualEditsFile, applyPcbEditEventsToManualEditsFile, applySchematicEditEventsToManualEditsFile, assembly, createUseComponent, enclosure, getPhaseTimingsFromRenderEvents, getSimpleRouteJsonFromCircuitJson, normalizePinLabels, orderedRenderPhases, renderPhaseIndexMap, resolveStaticFileImport, sel, simulation, unrouteCircuitJson, useCapacitor, useChip, useDiode, useLed, useRenderedCircuit, useResistor };

package/dist/index.js

@@ -84,6 +84,7 @@ __export(components_exports, {
   PcbNotePath: () => PcbNotePath,
   PcbNoteRect: () => PcbNoteRect,
   PcbNoteText: () => PcbNoteText,
+  PcbReturnCurrentSimulation: () => PcbReturnCurrentSimulation,
   PcbSoldermaskOpening: () => PcbSoldermaskOpening,
   PcbStiffener: () => PcbStiffener,
   PcbTrace: () => PcbTrace,
@@ -118340,7 +118341,7 @@ function Group_getRoutingPhasePlans(group) {
 var package_default = {
   name: "@tscircuit/core",
   type: "module",
-  version: "0.0.2118",
+  version: "0.0.2119",
   types: "dist/index.d.ts",
   main: "dist/index.js",
   module: "dist/index.js",
@@ -118399,7 +118400,7 @@ var package_default = {
     "@tscircuit/miniflex": "^0.0.4",
     "@tscircuit/modelprinter": "^0.0.18",
     "@tscircuit/ngspice-spice-engine": "^0.0.20",
-    "@tscircuit/props": "^0.0.697",
+    "@tscircuit/props": "^0.0.698",
     "@tscircuit/schematic-match-adapt": "^0.0.18",
     "@tscircuit/schematic-trace-solver": "https://jscdn.tscircuit.com/@tscircuit/schematic-trace-solver/0.0.230.tgz",
     "@tscircuit/solver-utils": "^0.0.16",
@@ -118483,7 +118484,7 @@ var package_default = {
   },
   overrides: {
     "@tscircuit/circuit-json-util": "^0.0.119",
-    "@tscircuit/props": "^0.0.697",
+    "@tscircuit/props": "^0.0.698",
     "circuit-json": "^0.0.525",
     "@tscircuit/cableprinter": "^0.0.6"
   }
@@ -133090,6 +133091,49 @@ var AnalogSweepParameter = class extends PrimitiveComponent2 {
   }
 };
 
+// lib/components/primitive-components/PcbReturnCurrentSimulation.ts
+import { pcbReturnCurrentSimulationProps } from "@tscircuit/props";
+var PcbReturnCurrentSimulation = class extends PrimitiveComponent2 {
+  simulation_experiment_id = null;
+  get config() {
+    return {
+      componentName: "PcbReturnCurrentSimulation",
+      zodProps: pcbReturnCurrentSimulationProps
+    };
+  }
+  doInitialSimulationRender() {
+    if (this.root?.pcbDisabled) return;
+    if (this.parent?.componentName === "PcbReturnCurrentSimulation") {
+      this.renderError(
+        "A PCB return-current simulation cannot contain another simulation."
+      );
+    }
+    if (this.children.some(
+      (child) => child.componentName !== "PcbReturnCurrentExcitation"
+    )) {
+      this.renderError(
+        "A PCB return-current simulation can contain only return-current excitations."
+      );
+    }
+    const experiment = this.root.db.simulation_experiment.insert({
+      name: this._parsedProps.name ?? "PCB return current",
+      experiment_type: "pcb_return_current"
+    });
+    this.simulation_experiment_id = experiment.simulation_experiment_id;
+  }
+  updateSimulationRender() {
+    if (!this.simulation_experiment_id) return;
+    this.root.db.simulation_experiment.update(this.simulation_experiment_id, {
+      name: this._parsedProps.name ?? "PCB return current"
+    });
+  }
+  removeSimulationRender() {
+    if (!this.simulation_experiment_id) return;
+    this.root.db.simulation_experiment.delete(this.simulation_experiment_id);
+    this.simulation_experiment_id = null;
+  }
+};
+
 // lib/components/primitive-components/VoltageProbe.ts
 import { voltageProbeProps } from "@tscircuit/props";
 
@@ -134544,6 +134588,13 @@ var enclosure = {
   }
 };
 
+// lib/namespaced-elements/simulation.ts
+var simulation = {
+  pcbreturncurrentsimulation: createNamespacedElement(
+    "pcbreturncurrentsimulation"
+  )
+};
+
 // lib/RootCircuit.ts
 var RootCircuit = class extends IsolatedCircuit {
   isRootCircuit = true;
@@ -134861,6 +134912,7 @@ export {
   PcbNotePath,
   PcbNoteRect,
   PcbNoteText,
+  PcbReturnCurrentSimulation,
   PcbSoldermaskOpening,
   PcbStiffener,
   PcbTrace,
@@ -134932,6 +134984,7 @@ export {
   renderPhaseIndexMap,
   resolveStaticFileImport,
   sel,
+  simulation,
   unrouteCircuitJson,
   useCapacitor,
   useChip,

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@tscircuit/core",
   "type": "module",
-  "version": "0.0.2119",
+  "version": "0.0.2120",
   "types": "dist/index.d.ts",
   "main": "dist/index.js",
   "module": "dist/index.js",
@@ -60,7 +60,7 @@
     "@tscircuit/miniflex": "^0.0.4",
     "@tscircuit/modelprinter": "^0.0.18",
     "@tscircuit/ngspice-spice-engine": "^0.0.20",
-    "@tscircuit/props": "^0.0.697",
+    "@tscircuit/props": "^0.0.698",
     "@tscircuit/schematic-match-adapt": "^0.0.18",
     "@tscircuit/schematic-trace-solver": "https://jscdn.tscircuit.com/@tscircuit/schematic-trace-solver/0.0.230.tgz",
     "@tscircuit/solver-utils": "^0.0.16",
@@ -144,7 +144,7 @@
   },
   "overrides": {
     "@tscircuit/circuit-json-util": "^0.0.119",
-    "@tscircuit/props": "^0.0.697",
+    "@tscircuit/props": "^0.0.698",
     "circuit-json": "^0.0.525",
     "@tscircuit/cableprinter": "^0.0.6"
   }