@tscircuit/core 0.0.1925 → 0.0.1927

package/dist/index.d.ts

@@ -1,5 +1,5 @@
 import * as circuit_json from 'circuit-json';
-import { PcbGroup, PcbTraceError, PcbPlacementError, PcbManualEditConflictWarning, PcbViaClearanceError, PcbVia as PcbVia$1, LayerRef, AnyCircuitElement, Size, PcbTrace as PcbTrace$1, PcbTraceRoutePoint, AnySourceComponent, PcbComponent, SchematicPort, SchematicComponent, SimulationVoltageSource, SimulationCurrentSource, PcbSilkscreenGraphic, RouteHintPoint, PcbBoard, SchematicSheet as SchematicSheet$1, SchematicGraphic as SchematicGraphic$1, SimulationExperiment, SimulationParameterSweep, CircuitJson } from 'circuit-json';
+import { PcbGroup, PcbTraceError, PcbPlacementError, PcbManualEditConflictWarning, PcbViaClearanceError, PcbVia as PcbVia$1, LayerRef, AnyCircuitElement, Size, PcbTrace as PcbTrace$1, PcbTraceRoutePoint, AnySourceComponent, PcbComponent, SchematicPort, SchematicComponent, SimulationVoltageSource, SimulationCurrentSource, PcbSilkscreenGraphic, SourceBus, RouteHintPoint, PcbBoard, SchematicSheet as SchematicSheet$1, SchematicGraphic as SchematicGraphic$1, SimulationExperiment, SimulationParameterSweep, CircuitJson } from 'circuit-json';
 import * as _tscircuit_props from '@tscircuit/props';
 import { PlatformConfig, traceProps, netProps, AutoroutingPhaseProps, AutorouterProp, subcircuitGroupProps, AutorouterConfig, PcbSx, portProps, PinAttributeMap, SupplierPartNumbers, CadModelProp, SchematicPortArrangement, groupProps, platedHoleProps, BoardOutlinePoint, boardProps, subcircuitProps, subpanelProps, capacitorProps, antennaProps, chipProps, pinoutProps, diodeProps, fuseProps, jumperProps, interconnectProps, solderjumperProps, ledProps, powerSourceProps, voltageSourceProps, currentSourceProps, ammeterProps, resistorProps, constraintProps, drcCheckProps, autoroutingPhaseProps, fabricationNoteRectProps, fabricationNotePathProps, fabricationNoteTextProps, fabricationNoteDimensionProps, pcbNoteLineProps, pcbNoteRectProps, pcbNoteTextProps, pcbNotePathProps, pcbNoteDimensionProps, footprintProps, breakoutProps, breakoutPointProps, holeProps, pcbKeepoutProps, netLabelProps, cadmodelProps, cadassemblyProps, courtyardCircleProps, courtyardOutlineProps, courtyardRectProps, silkscreenCircleProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, silkscreenLineProps, silkscreenGraphicProps, smtPadProps, fiducialProps, busProps, differentialPairProps, traceHintProps, viaProps, copperPourProps, copperTextProps, cutoutProps, assemblyDeviceProps, enclosureCutoutApertureProps, enclosureFdmBoxProps, batteryProps, pinHeaderProps, resonatorProps, inductorProps, potentiometerProps, pushButtonProps, crystalProps, CrystalPinLabels, transistorProps, mosfetProps, opampProps, OpAmpPinLabels, switchProps, SwitchProps, testpointProps, schematicTextProps, schematicLineProps, schematicRectProps, schematicArcProps, schematicCircleProps, schematicPathProps, schematicBoxProps, schematicSymbolProps, schematicSectionProps, schematicSheetProps, schematicGraphicProps, schematicTableProps, schematicRowProps, schematicCellProps, symbolProps, analogSimulationProps, analogTransientSimulationProps, analogDcOperatingPointSimulationProps, analogDcSweepSimulationProps, analogAcSweepSimulationProps, analogSweepParameterProps, voltageProbeProps, spicemodelProps, AnalogTransientSimulationProps, AnalogDcSweepSimulationProps, AnalogAcSweepSimulationProps, AnalogSweepParameterProps, AssemblyDevicePropsInput, EnclosureCutoutApertureProps, EnclosureFdmBoxProps, CapacitorProps, ChipProps, DiodeProps, ResistorProps, ManualEditEvent, ManualEditsFile, ChipConnections, manual_edits_file } from '@tscircuit/props';
 export { FanoutTracePath, fanoutTracePath, kicadFootprintStrings } from '@tscircuit/props';
@@ -107591,7 +107591,9 @@ declare class Fiducial extends PrimitiveComponent<typeof fiducialProps> {
  * Declares a group of connections that an autorouter should keep together.
  */
 declare class Bus extends PrimitiveComponent<typeof busProps> {
+    source_bus_id?: SourceBus["source_bus_id"];
     get config(): BaseComponentConfig;
+    doInitialSourceAddConnectivityMapKey(): void;
 }
 
 /**
@@ -107651,6 +107653,8 @@ declare const pcbTraceProps: z.ZodObject<{
         is_inside_copper_pour: z.ZodOptional<z.ZodBoolean>;
         hole_diameter: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
         outer_diameter: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+        tented_on_top: z.ZodOptional<z.ZodBoolean>;
+        tented_on_bottom: z.ZodOptional<z.ZodBoolean>;
         from_layer: z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>, z.ZodObject<{
             name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>;
         }, "strip", z.ZodTypeAny, {
@@ -107679,6 +107683,8 @@ declare const pcbTraceProps: z.ZodObject<{
         outer_diameter?: number | undefined;
         copper_pour_id?: string | undefined;
         is_inside_copper_pour?: boolean | undefined;
+        tented_on_top?: boolean | undefined;
+        tented_on_bottom?: boolean | undefined;
     }, {
         x: string | number;
         y: string | number;
@@ -107693,6 +107699,8 @@ declare const pcbTraceProps: z.ZodObject<{
         outer_diameter?: string | number | undefined;
         copper_pour_id?: string | undefined;
         is_inside_copper_pour?: boolean | undefined;
+        tented_on_top?: boolean | undefined;
+        tented_on_bottom?: boolean | undefined;
     }>, z.ZodObject<{
         route_type: z.ZodLiteral<"through_pad">;
         start: z.ZodObject<{
@@ -107793,6 +107801,8 @@ declare const pcbTraceProps: z.ZodObject<{
         outer_diameter?: number | undefined;
         copper_pour_id?: string | undefined;
         is_inside_copper_pour?: boolean | undefined;
+        tented_on_top?: boolean | undefined;
+        tented_on_bottom?: boolean | undefined;
     } | {
         width: number;
         start: {
@@ -107837,6 +107847,8 @@ declare const pcbTraceProps: z.ZodObject<{
         outer_diameter?: string | number | undefined;
         copper_pour_id?: string | undefined;
         is_inside_copper_pour?: boolean | undefined;
+        tented_on_top?: boolean | undefined;
+        tented_on_bottom?: boolean | undefined;
     } | {
         width: string | number;
         start: {
@@ -107913,6 +107925,8 @@ declare class PcbTrace extends PrimitiveComponent<typeof pcbTraceProps> {
                 is_inside_copper_pour: z.ZodOptional<z.ZodBoolean>;
                 hole_diameter: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
                 outer_diameter: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+                tented_on_top: z.ZodOptional<z.ZodBoolean>;
+                tented_on_bottom: z.ZodOptional<z.ZodBoolean>;
                 from_layer: z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>, z.ZodObject<{
                     name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>;
                 }, "strip", z.ZodTypeAny, {
@@ -107941,6 +107955,8 @@ declare class PcbTrace extends PrimitiveComponent<typeof pcbTraceProps> {
                 outer_diameter?: number | undefined;
                 copper_pour_id?: string | undefined;
                 is_inside_copper_pour?: boolean | undefined;
+                tented_on_top?: boolean | undefined;
+                tented_on_bottom?: boolean | undefined;
             }, {
                 x: string | number;
                 y: string | number;
@@ -107955,6 +107971,8 @@ declare class PcbTrace extends PrimitiveComponent<typeof pcbTraceProps> {
                 outer_diameter?: string | number | undefined;
                 copper_pour_id?: string | undefined;
                 is_inside_copper_pour?: boolean | undefined;
+                tented_on_top?: boolean | undefined;
+                tented_on_bottom?: boolean | undefined;
             }>, z.ZodObject<{
                 route_type: z.ZodLiteral<"through_pad">;
                 start: z.ZodObject<{
@@ -108055,6 +108073,8 @@ declare class PcbTrace extends PrimitiveComponent<typeof pcbTraceProps> {
                 outer_diameter?: number | undefined;
                 copper_pour_id?: string | undefined;
                 is_inside_copper_pour?: boolean | undefined;
+                tented_on_top?: boolean | undefined;
+                tented_on_bottom?: boolean | undefined;
             } | {
                 width: number;
                 start: {
@@ -108099,6 +108119,8 @@ declare class PcbTrace extends PrimitiveComponent<typeof pcbTraceProps> {
                 outer_diameter?: string | number | undefined;
                 copper_pour_id?: string | undefined;
                 is_inside_copper_pour?: boolean | undefined;
+                tented_on_top?: boolean | undefined;
+                tented_on_bottom?: boolean | undefined;
             } | {
                 width: string | number;
                 start: {

package/dist/index.js

@@ -53464,15 +53464,72 @@ import {
   getFullConnectivityMapFromCircuitJson as getFullConnectivityMapFromCircuitJson4
 } from "circuit-json-to-connectivity-map";
 
+// lib/utils/autorouting/getBusSourceTraceIdOrThrow.ts
+var getBusSourceTraceIdOrThrow = ({
+  bus,
+  busSourceTraces,
+  traceNameOrPortSelector
+}) => {
+  const sourceTracesWithMatchingName = busSourceTraces.filter(
+    (sourceTrace2) => sourceTrace2.name === traceNameOrPortSelector
+  );
+  const selectedPort = sourceTracesWithMatchingName.length === 0 ? bus.getSubcircuit().selectOne(traceNameOrPortSelector, {
+    type: "port"
+  }) : null;
+  const selectedSourcePortId = selectedPort?.source_port_id ?? void 0;
+  const matchingSourceTraces = selectedSourcePortId ? busSourceTraces.filter(
+    (sourceTrace2) => sourceTrace2.connected_source_port_ids.includes(selectedSourcePortId)
+  ) : sourceTracesWithMatchingName;
+  if (matchingSourceTraces.length === 0) {
+    throw new Error(
+      `Could not find source trace for trace name or port selector "${traceNameOrPortSelector}" in bus "${bus.name}"`
+    );
+  }
+  if (matchingSourceTraces.length > 1) {
+    throw new Error(
+      `Trace name or port selector "${traceNameOrPortSelector}" matches multiple source traces in bus "${bus.name}"`
+    );
+  }
+  const sourceTrace = matchingSourceTraces[0];
+  return sourceTrace.source_trace_id;
+};
+
 // lib/components/primitive-components/Bus.ts
 import { busProps } from "@tscircuit/props";
 var Bus = class extends PrimitiveComponent2 {
+  source_bus_id;
   get config() {
     return {
       componentName: "Bus",
       zodProps: busProps
     };
   }
+  // This phase follows SourceTraceRender for every component, including traces
+  // declared after the bus. It also runs when PCB routing is disabled.
+  doInitialSourceAddConnectivityMapKey() {
+    const { db } = this.root;
+    const subcircuit_id = this.getSubcircuit().subcircuit_id;
+    const busSourceTraces = db.source_trace.list().filter((sourceTrace) => sourceTrace.subcircuit_id === subcircuit_id);
+    const source_trace_ids = this._parsedProps.connections.map(
+      (traceNameOrPortSelector) => getBusSourceTraceIdOrThrow({
+        bus: this,
+        busSourceTraces,
+        traceNameOrPortSelector
+      })
+    );
+    if (new Set(source_trace_ids).size !== source_trace_ids.length) {
+      throw new Error(
+        `Bus "${this.name}" resolves multiple entries to one trace`
+      );
+    }
+    const sourceBus = db.source_bus.insert({
+      name: this._parsedProps.name,
+      source_trace_ids,
+      max_length_skew: this._parsedProps.maxLengthSkew,
+      subcircuit_id
+    });
+    this.source_bus_id = sourceBus.source_bus_id;
+  }
 };
 
 // lib/components/primitive-components/DifferentialPair.ts
@@ -53625,34 +53682,6 @@ var expandSrjBoundsToIncludeConnectionPoints = (input) => {
 };
 
 // lib/utils/autorouting/getBusesForSimpleRouteJson.ts
-var getBusSourceTraceIdOrThrow = ({
-  bus,
-  busSourceTraces,
-  traceNameOrPortSelector
-}) => {
-  const sourceTracesWithMatchingName = busSourceTraces.filter(
-    (sourceTrace2) => sourceTrace2.name === traceNameOrPortSelector
-  );
-  const selectedPort = sourceTracesWithMatchingName.length === 0 ? bus.getSubcircuit().selectOne(traceNameOrPortSelector, {
-    type: "port"
-  }) : null;
-  const selectedSourcePortId = selectedPort?.source_port_id ?? void 0;
-  const matchingSourceTraces = selectedSourcePortId ? busSourceTraces.filter(
-    (sourceTrace2) => sourceTrace2.connected_source_port_ids.includes(selectedSourcePortId)
-  ) : sourceTracesWithMatchingName;
-  if (matchingSourceTraces.length === 0) {
-    throw new Error(
-      `Could not find source trace for trace name or port selector "${traceNameOrPortSelector}" in bus "${bus.name}"`
-    );
-  }
-  if (matchingSourceTraces.length > 1) {
-    throw new Error(
-      `Trace name or port selector "${traceNameOrPortSelector}" matches multiple source traces in bus "${bus.name}"`
-    );
-  }
-  const sourceTrace = matchingSourceTraces[0];
-  return sourceTrace.source_trace_id;
-};
 var getBusSrjConnectionNamesOrThrow = ({
   srjConnections,
   bus,
@@ -63283,7 +63312,7 @@ function Group_getRoutingPhasePlans(group) {
 var package_default = {
   name: "@tscircuit/core",
   type: "module",
-  version: "0.0.1924",
+  version: "0.0.1925",
   types: "dist/index.d.ts",
   main: "dist/index.js",
   module: "dist/index.js",
@@ -63319,7 +63348,7 @@ var package_default = {
     "@tscircuit/bga-fanout-solver": "github:tscircuit/bga-fanout-solver#247c835cb8d69b65e53891dcf869731079415b39",
     "@tscircuit/bus-lanes-solver": "github:tscircuit/bus-lanes-solver#0bc8d071241b18a3e7465a878881abe4998f6384",
     "@tscircuit/capacity-autorouter": "^0.0.900",
-    "@tscircuit/checks": "^0.0.196",
+    "@tscircuit/checks": "^0.0.197",
     "@tscircuit/circuit-json-util": "^0.0.114",
     "@tscircuit/common": "^0.0.20",
     "@tscircuit/copper-pour-solver": "^0.0.54",
@@ -63353,7 +63382,7 @@ var package_default = {
     "bun-match-svg": "0.0.12",
     "calculate-elbow": "^0.0.12",
     "chokidar-cli": "^3.0.0",
-    "circuit-json": "^0.0.489",
+    "circuit-json": "^0.0.492",
     "circuit-json-to-bpc": "^0.0.13",
     "circuit-json-to-connectivity-map": "^0.0.30",
     "circuit-json-to-gltf": "^0.0.128",
@@ -63417,7 +63446,7 @@ var package_default = {
   overrides: {
     "@tscircuit/circuit-json-util": "^0.0.114",
     "@tscircuit/props": "^0.0.660",
-    "circuit-json": "^0.0.489"
+    "circuit-json": "^0.0.492"
   }
 };
 

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@tscircuit/core",
   "type": "module",
-  "version": "0.0.1925",
+  "version": "0.0.1927",
   "types": "dist/index.d.ts",
   "main": "dist/index.js",
   "module": "dist/index.js",
@@ -37,7 +37,7 @@
     "@tscircuit/bga-fanout-solver": "github:tscircuit/bga-fanout-solver#247c835cb8d69b65e53891dcf869731079415b39",
     "@tscircuit/bus-lanes-solver": "github:tscircuit/bus-lanes-solver#0bc8d071241b18a3e7465a878881abe4998f6384",
     "@tscircuit/capacity-autorouter": "^0.0.900",
-    "@tscircuit/checks": "^0.0.196",
+    "@tscircuit/checks": "^0.0.197",
     "@tscircuit/circuit-json-util": "^0.0.114",
     "@tscircuit/common": "^0.0.20",
     "@tscircuit/copper-pour-solver": "^0.0.54",
@@ -71,7 +71,7 @@
     "bun-match-svg": "0.0.12",
     "calculate-elbow": "^0.0.12",
     "chokidar-cli": "^3.0.0",
-    "circuit-json": "^0.0.489",
+    "circuit-json": "^0.0.492",
     "circuit-json-to-bpc": "^0.0.13",
     "circuit-json-to-connectivity-map": "^0.0.30",
     "circuit-json-to-gltf": "^0.0.128",
@@ -135,6 +135,6 @@
   "overrides": {
     "@tscircuit/circuit-json-util": "^0.0.114",
     "@tscircuit/props": "^0.0.660",
-    "circuit-json": "^0.0.489"
+    "circuit-json": "^0.0.492"
   }
 }