@tscircuit/core 0.0.1902 → 0.0.1904

package/dist/index.d.ts

@@ -138,11 +138,13 @@ type SimplifiedPcbTrace = Omit<SimplifiedPcbTrace$1, "connection_name" | "route"
 };
 /** A connection identifier in Simple Route JSON. */
 type SrjConnectionName = string;
-type SimpleRoutePoint = {
+/** Core emits fixed-layer routing terminals, not multilayer connection points. */
+type SingleLayerConnectionPoint = {
     x: number;
     y: number;
     layer: string;
-    layers?: string[];
+    /** Reject mixed layer/layers objects even when assigned through a variable. */
+    layers?: never;
     pointId?: string;
     pcb_port_id?: string;
     /** Stable semantic selector for the source port, e.g. `U1.USB_DM`. */
@@ -152,6 +154,8 @@ type SimpleRoutePoint = {
         viaDiameter?: number;
     };
 };
+/** Backward-compatible name for core's single-layer routing terminals. */
+type SimpleRoutePoint = SingleLayerConnectionPoint;
 type SimpleRouteConnection = {
     name: SrjConnectionName;
     routingPcbGroupId?: PcbGroupId;
@@ -163,7 +167,7 @@ type SimpleRouteConnection = {
     nominalTraceWidth?: number;
     /** @deprecated Use `nominalTraceWidth` instead. */
     width?: number;
-    pointsToConnect: SimpleRoutePoint[];
+    pointsToConnect: SingleLayerConnectionPoint[];
     /** @deprecated DO NOT USE **/
     externallyConnectedPointIds?: string[][];
 };
@@ -193707,4 +193711,4 @@ declare module "react/jsx-runtime" {
     }
 }
 
-export { Ammeter, AnalogAcSweepSimulation, AnalogAnalysisSimulation, AnalogDcOperatingPointSimulation, AnalogDcSweepSimulation, AnalogSimulation, AnalogSweepParameter, AnalogTransientSimulation, Antenna, AssemblyDevice, type AssemblyDeviceJsxProps, type AsyncEffect, type AutorouterCompleteEvent, type AutorouterErrorEvent, type AutorouterEvent, type AutorouterProgressEvent, type AutoroutingCacheDisabledReason, type AutoroutingCacheStatus, type AutoroutingEndEvent, type AutoroutingErrorEvent, type AutoroutingExecutionMetadata, AutoroutingPhase, type AutoroutingProgressEvent, type AutoroutingStartEvent, Battery, Board, Breakout, BreakoutPoint, Bus, CadAssembly, CadModel, Capacitor, Chip, Circuit, type CircuitJsonMetadata, type ComponentWithPins, Connector, Constraint, CopperPour, CopperText, CourtyardCircle, CourtyardOutline, CourtyardRect, Crystal, CurrentSource, Cutout, type DebugLogOutputEvent, DifferentialPair, Diode, DrcCheck, EnclosureCutoutAperture, EnclosureFdmBox, FabricationNoteDimension, FabricationNotePath, FabricationNoteRect, FabricationNoteText, Breakout as Fanout, BreakoutPoint as FanoutPoint, Fiducial, Footprint, Fuse, type GenericConnectionsAndSelectorsSel, type GenericLocalAutorouter, Group, Hole, type IIsolatedCircuit, type IRenderable, type IRootCircuit, Inductor, Interconnect, IsolatedCircuit, Jumper, Keepout, Led, type LocalCacheEngine, Mosfet, MountedBoard, Net, NetLabel, NormalComponent, type Obstacle, OpAmp, type PackingEndEvent, type PackingErrorEvent, type PackingStartEvent, Panel, type PcbGroupId, PcbNoteDimension, PcbNoteLine, PcbNotePath, PcbNoteRect, PcbNoteText, PcbTrace, PcbVia, PinHeader, type PinLabelSpec, Pinout, PlatedHole, Port, Potentiometer, PowerSource, PrimitiveComponent, Project, PushButton, type RenderPhase, type RenderPhaseFn, type RenderPhaseFunctions, type RenderPhaseStates, Renderable, Resistor, Resonator, RootCircuit, type RootCircuitEventName, SOLVERS, SchematicArc, SchematicBox, SchematicCell, SchematicCircle, SchematicGraphic, SchematicLine, SchematicPath, SchematicRect, SchematicRow, SchematicSection, SchematicSheet, SchematicSymbol, SchematicTable, SchematicText, type Sel, SilkscreenCircle, SilkscreenGraphic, SilkscreenLine, SilkscreenPath, SilkscreenRect, SilkscreenText, type SimpleRouteBounds, type SimpleRouteBus, type SimpleRouteBusTermination, type SimpleRouteConnection, type SimpleRouteDifferentialPair, type SimpleRouteJson, type SimpleRoutePoint, type SimplifiedPcbTrace, SmtPad, SolderJumper, type SolverEndedEvent, type SolverName, type SolverStartedEvent, SpiceModel, type SrjConnectionName, Subcircuit, Subpanel, Switch, SymbolComponent as Symbol, TestPoint, Trace, TraceHint, Transistor, Via, VoltageProbe, VoltageSource, analog, applyEditEvents, applyEditEventsToManualEditsFile, applyPcbEditEventsToManualEditsFile, applySchematicEditEventsToManualEditsFile, assembly, createUseComponent, enclosure, getPhaseTimingsFromRenderEvents, getSimpleRouteJsonFromCircuitJson, normalizePinLabels, orderedRenderPhases, renderPhaseIndexMap, resolveStaticFileImport, sel, unrouteCircuitJson, useCapacitor, useChip, useDiode, useLed, useRenderedCircuit, useResistor };
+export { Ammeter, AnalogAcSweepSimulation, AnalogAnalysisSimulation, AnalogDcOperatingPointSimulation, AnalogDcSweepSimulation, AnalogSimulation, AnalogSweepParameter, AnalogTransientSimulation, Antenna, AssemblyDevice, type AssemblyDeviceJsxProps, type AsyncEffect, type AutorouterCompleteEvent, type AutorouterErrorEvent, type AutorouterEvent, type AutorouterProgressEvent, type AutoroutingCacheDisabledReason, type AutoroutingCacheStatus, type AutoroutingEndEvent, type AutoroutingErrorEvent, type AutoroutingExecutionMetadata, AutoroutingPhase, type AutoroutingProgressEvent, type AutoroutingStartEvent, Battery, Board, Breakout, BreakoutPoint, Bus, CadAssembly, CadModel, Capacitor, Chip, Circuit, type CircuitJsonMetadata, type ComponentWithPins, Connector, Constraint, CopperPour, CopperText, CourtyardCircle, CourtyardOutline, CourtyardRect, Crystal, CurrentSource, Cutout, type DebugLogOutputEvent, DifferentialPair, Diode, DrcCheck, EnclosureCutoutAperture, EnclosureFdmBox, FabricationNoteDimension, FabricationNotePath, FabricationNoteRect, FabricationNoteText, Breakout as Fanout, BreakoutPoint as FanoutPoint, Fiducial, Footprint, Fuse, type GenericConnectionsAndSelectorsSel, type GenericLocalAutorouter, Group, Hole, type IIsolatedCircuit, type IRenderable, type IRootCircuit, Inductor, Interconnect, IsolatedCircuit, Jumper, Keepout, Led, type LocalCacheEngine, Mosfet, MountedBoard, Net, NetLabel, NormalComponent, type Obstacle, OpAmp, type PackingEndEvent, type PackingErrorEvent, type PackingStartEvent, Panel, type PcbGroupId, PcbNoteDimension, PcbNoteLine, PcbNotePath, PcbNoteRect, PcbNoteText, PcbTrace, PcbVia, PinHeader, type PinLabelSpec, Pinout, PlatedHole, Port, Potentiometer, PowerSource, PrimitiveComponent, Project, PushButton, type RenderPhase, type RenderPhaseFn, type RenderPhaseFunctions, type RenderPhaseStates, Renderable, Resistor, Resonator, RootCircuit, type RootCircuitEventName, SOLVERS, SchematicArc, SchematicBox, SchematicCell, SchematicCircle, SchematicGraphic, SchematicLine, SchematicPath, SchematicRect, SchematicRow, SchematicSection, SchematicSheet, SchematicSymbol, SchematicTable, SchematicText, type Sel, SilkscreenCircle, SilkscreenGraphic, SilkscreenLine, SilkscreenPath, SilkscreenRect, SilkscreenText, type SimpleRouteBounds, type SimpleRouteBus, type SimpleRouteBusTermination, type SimpleRouteConnection, type SimpleRouteDifferentialPair, type SimpleRouteJson, type SimpleRoutePoint, type SimplifiedPcbTrace, type SingleLayerConnectionPoint, SmtPad, SolderJumper, type SolverEndedEvent, type SolverName, type SolverStartedEvent, SpiceModel, type SrjConnectionName, Subcircuit, Subpanel, Switch, SymbolComponent as Symbol, TestPoint, Trace, TraceHint, Transistor, Via, VoltageProbe, VoltageSource, analog, applyEditEvents, applyEditEventsToManualEditsFile, applyPcbEditEventsToManualEditsFile, applySchematicEditEventsToManualEditsFile, assembly, createUseComponent, enclosure, getPhaseTimingsFromRenderEvents, getSimpleRouteJsonFromCircuitJson, normalizePinLabels, orderedRenderPhases, renderPhaseIndexMap, resolveStaticFileImport, sel, unrouteCircuitJson, useCapacitor, useChip, useDiode, useLed, useRenderedCircuit, useResistor };

package/dist/index.js

@@ -61218,7 +61218,7 @@ import { getBoundsFromPoints as getBoundsFromPoints8 } from "@tscircuit/math-uti
 
 // lib/components/primitive-components/Group/get-saved-autorouting-phase-traces.ts
 import { applyToPoint as applyToPoint30, compose as compose12, translate as translate12 } from "transformation-matrix";
-var touchesEndpoint = (point6, endpoint) => Math.hypot(point6.x - endpoint.x, point6.y - endpoint.y) < 1e-4 && (point6.layers ?? [point6.layer]).includes(endpoint.layer);
+var touchesEndpoint = (point6, endpoint) => Math.hypot(point6.x - endpoint.x, point6.y - endpoint.y) < 1e-4 && point6.layer === endpoint.layer;
 function getSavedAutoroutingPhaseTraces(phase, input, isFanout) {
   const group = phase.getGroup();
   const transformBeforeLayout = group._computePcbGlobalTransformBeforeLayout();
@@ -61314,7 +61314,6 @@ function getSavedAutoroutingPhaseTraces(phase, input, isFanout) {
         x: last.x,
         y: last.y,
         layer: lastLayer,
-        layers: [lastLayer],
         pointId: `${pcbTraceId}_exit`
       };
     }
@@ -61598,7 +61597,7 @@ function getSavedFanoutTraces(breakout, input) {
       ];
       if (connection.pointsToConnect.some(
         (point6) => !endpoints.some(
-          (endpoint) => Math.hypot(point6.x - endpoint.x, point6.y - endpoint.y) < 1e-4 && (point6.layers ?? [point6.layer]).includes(endpoint.layer)
+          (endpoint) => Math.hypot(point6.x - endpoint.x, point6.y - endpoint.y) < 1e-4 && point6.layer === endpoint.layer
         )
       ))
         throw new Error(
@@ -62036,7 +62035,7 @@ function Group_getRoutingPhasePlans(group) {
 var package_default = {
   name: "@tscircuit/core",
   type: "module",
-  version: "0.0.1901",
+  version: "0.0.1903",
   types: "dist/index.d.ts",
   main: "dist/index.js",
   module: "dist/index.js",
@@ -62108,7 +62107,7 @@ var package_default = {
     "circuit-json": "^0.0.487",
     "circuit-json-to-bpc": "^0.0.13",
     "circuit-json-to-connectivity-map": "^0.0.30",
-    "circuit-json-to-gltf": "^0.0.124",
+    "circuit-json-to-gltf": "^0.0.125",
     "circuit-json-to-spice": "^0.0.45",
     "circuit-to-svg": "^0.0.416",
     concurrently: "^9.1.2",
@@ -62122,7 +62121,7 @@ var package_default = {
     "live-server": "^1.2.2",
     minicssgrid: "^0.0.9",
     "pkg-pr-new": "^0.0.37",
-    poppygl: "^0.0.27",
+    poppygl: "^0.0.29",
     react: "^19.1.0",
     "react-dom": "^19.1.0",
     "schematic-symbols": "^0.0.244",
@@ -62514,7 +62513,6 @@ function Group_syncFanoutExitsWithGlobalConnections({
       previousPoint
     } of globalPointMatches) {
       const {
-        layers: _previousLayers,
         terminalVia: _previousTerminalVia,
         ...previousPointWithoutLayerOverrides
       } = previousPoint;
@@ -62523,7 +62521,6 @@ function Group_syncFanoutExitsWithGlobalConnections({
         x: fanoutExitPoint.x,
         y: fanoutExitPoint.y,
         layer: fanoutExitPoint.layer,
-        ...fanoutExitPoint.layers ? { layers: [...fanoutExitPoint.layers] } : {},
         ...fanoutExitPoint.terminalVia ? { terminalVia: { ...fanoutExitPoint.terminalVia } } : {}
       };
       globalConnection.pointsToConnect[pointIndex] = synchronizedGlobalPoint;

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@tscircuit/core",
   "type": "module",
-  "version": "0.0.1902",
+  "version": "0.0.1904",
   "types": "dist/index.d.ts",
   "main": "dist/index.js",
   "module": "dist/index.js",
@@ -73,7 +73,7 @@
     "circuit-json": "^0.0.487",
     "circuit-json-to-bpc": "^0.0.13",
     "circuit-json-to-connectivity-map": "^0.0.30",
-    "circuit-json-to-gltf": "^0.0.124",
+    "circuit-json-to-gltf": "^0.0.125",
     "circuit-json-to-spice": "^0.0.45",
     "circuit-to-svg": "^0.0.416",
     "concurrently": "^9.1.2",
@@ -87,7 +87,7 @@
     "live-server": "^1.2.2",
     "minicssgrid": "^0.0.9",
     "pkg-pr-new": "^0.0.37",
-    "poppygl": "^0.0.27",
+    "poppygl": "^0.0.29",
     "react": "^19.1.0",
     "react-dom": "^19.1.0",
     "schematic-symbols": "^0.0.244",