@tscircuit/core 0.0.1233 → 0.0.1235

package/dist/index.d.ts

@@ -1,5 +1,5 @@
 import * as circuit_json from 'circuit-json';
-import { PcbTraceError, PcbPlacementError, PcbManualEditConflictWarning, PcbViaClearanceError, LayerRef, AnyCircuitElement, Size, PcbTraceRoutePoint, AnySourceComponent, PcbComponent, PcbTrace as PcbTrace$1, PcbVia, SchematicPort, SchematicComponent, RouteHintPoint, CircuitJson } from 'circuit-json';
+import { PcbTraceError, PcbPlacementError, PcbManualEditConflictWarning, PcbViaClearanceError, LayerRef, AnyCircuitElement, Size, PcbTrace as PcbTrace$1, PcbTraceRoutePoint, AnySourceComponent, PcbComponent, PcbVia, SchematicPort, SchematicComponent, RouteHintPoint, CircuitJson } from 'circuit-json';
 import * as _tscircuit_props from '@tscircuit/props';
 import { PlatformConfig, traceProps, netProps, AutorouterProp, AutoroutingPhaseProps, subcircuitGroupProps, AutorouterConfig, PcbSx, portProps, SupplierPartNumbers, CadModelProp, SchematicPortArrangement, groupProps, boardProps, subcircuitProps, subpanelProps, capacitorProps, chipProps, pinoutProps, diodeProps, fuseProps, jumperProps, interconnectProps, solderjumperProps, ledProps, powerSourceProps, voltageSourceProps, currentSourceProps, resistorProps, constraintProps, autoroutingPhaseProps, fabricationNoteRectProps, fabricationNotePathProps, fabricationNoteTextProps, fabricationNoteDimensionProps, pcbNoteLineProps, pcbNoteRectProps, pcbNoteTextProps, pcbNotePathProps, pcbNoteDimensionProps, footprintProps, breakoutProps, breakoutPointProps, holeProps, pcbKeepoutProps, netLabelProps, cadmodelProps, cadassemblyProps, platedHoleProps, courtyardCircleProps, courtyardOutlineProps, courtyardRectProps, silkscreenCircleProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, silkscreenLineProps, smtPadProps, fiducialProps, traceHintProps, viaProps, copperPourProps, copperTextProps, cutoutProps, batteryProps, pinHeaderProps, resonatorProps, inductorProps, potentiometerProps, pushButtonProps, crystalProps, transistorProps, mosfetProps, opampProps, OpAmpPinLabels, switchProps, SwitchProps, testpointProps, schematicTextProps, schematicLineProps, schematicRectProps, schematicArcProps, schematicCircleProps, schematicPathProps, schematicBoxProps, schematicSectionProps, schematicTableProps, schematicRowProps, schematicCellProps, symbolProps, analogSimulationProps, voltageProbeProps, CapacitorProps, ChipProps, DiodeProps, ResistorProps, ManualEditEvent, ManualEditsFile, ChipConnections, manual_edits_file } from '@tscircuit/props';
 export { kicadFootprintStrings } from '@tscircuit/props';
@@ -458,6 +458,7 @@ declare class Trace extends PrimitiveComponent<typeof traceProps> implements Tra
     source_trace_id: string | null;
     pcb_trace_id: string | null;
     schematic_trace_id: string | null;
+    _inflatedPcbTrace?: PcbTrace$1;
     _portsRoutedOnPcb: Port[];
     subcircuit_connectivity_map_key: string | null;
     _traceConnectionHash: string | null;

package/dist/index.js

@@ -4541,7 +4541,8 @@ function Trace_doInitialPcbManualTraceRender(trace) {
   const subcircuit = trace.getSubcircuit();
   const hasPcbPath = props.pcbPath !== void 0;
   const wantsStraightLine = Boolean(props.pcbStraightLine);
-  if (!hasPcbPath && !wantsStraightLine) return;
+  const inflatedPcbTrace = trace._inflatedPcbTrace;
+  if (!hasPcbPath && !wantsStraightLine && !inflatedPcbTrace) return;
   let allPortsFound;
   let ports;
   let portsWithSelectors;
@@ -4594,6 +4595,49 @@ function Trace_doInitialPcbManualTraceRender(trace) {
     return;
   }
   const width = trace._getExplicitTraceThickness() ?? trace.getSubcircuit()._parsedProps.minTraceWidth ?? jlcMinTolerances.min_trace_width;
+  if (inflatedPcbTrace) {
+    const { maybeFlipLayer } = trace._getPcbPrimitiveFlippedHelpers();
+    const transform2 = trace._computePcbGlobalTransformBeforeLayout();
+    const transformedRoute = inflatedPcbTrace.route.map((point6) => {
+      const { x, y, ...restOfPoint } = point6;
+      const transformedPoint = applyToPoint2(transform2, { x, y });
+      if (point6.route_type === "wire" && point6.layer) {
+        return {
+          ...transformedPoint,
+          ...restOfPoint,
+          layer: maybeFlipLayer(point6.layer)
+        };
+      }
+      return { ...transformedPoint, ...restOfPoint };
+    });
+    const pcb_trace2 = db.pcb_trace.insert({
+      ...inflatedPcbTrace,
+      route: transformedRoute,
+      source_trace_id: trace.source_trace_id,
+      subcircuit_id: subcircuit?.subcircuit_id ?? void 0,
+      pcb_group_id: trace.getGroup()?.pcb_group_id ?? void 0
+    });
+    const pcbStyle2 = trace.getInheritedMergedProperty("pcbStyle");
+    const { holeDiameter: holeDiameter2, padDiameter: padDiameter2 } = getViaDiameterDefaults(pcbStyle2);
+    for (const point6 of transformedRoute) {
+      if (point6.route_type === "via") {
+        db.pcb_via.insert({
+          pcb_trace_id: pcb_trace2.pcb_trace_id,
+          x: point6.x,
+          y: point6.y,
+          hole_diameter: holeDiameter2,
+          outer_diameter: padDiameter2,
+          layers: [point6.from_layer, point6.to_layer],
+          from_layer: point6.from_layer,
+          to_layer: point6.to_layer
+        });
+      }
+    }
+    trace._portsRoutedOnPcb = ports;
+    trace.pcb_trace_id = pcb_trace2.pcb_trace_id;
+    trace._insertErrorIfTraceIsOutsideBoard(pcb_trace2.route, ports);
+    return;
+  }
   if (wantsStraightLine && !hasPcbPath) {
     if (!ports || ports.length < 2) {
       trace.renderError("pcbStraightLine requires exactly two connected ports");
@@ -4960,6 +5004,7 @@ var Trace3 = class extends PrimitiveComponent2 {
   source_trace_id = null;
   pcb_trace_id = null;
   schematic_trace_id = null;
+  _inflatedPcbTrace;
   _portsRoutedOnPcb;
   subcircuit_connectivity_map_key = null;
   _traceConnectionHash = null;
@@ -11419,7 +11464,7 @@ var NormalComponent3 = class extends PrimitiveComponent2 {
   }
   _addChildrenFromStringFootprint() {
     const { pcbRotation, pinLabels, pcbPinLabels } = this.props;
-    let { footprint } = this.props;
+    let footprint = this._parsedProps.footprint ?? this.props.footprint;
     footprint ??= this._getImpliedFootprintString?.();
     if (!footprint) return;
     if (typeof footprint === "string") {
@@ -20541,10 +20586,11 @@ function inflateSourceTrace(sourceTrace, inflatorContext) {
   }
   if (pcbPath && pcbPath.length > 0) {
     traceProps2.pcbPath = pcbPath;
-  } else if (pcbTrace) {
+  } else if (!pcbTrace && sourceTrace.connected_source_port_ids.length === 2 && sourceTrace.connected_source_net_ids.length === 0) {
     traceProps2.pcbStraightLine = true;
   }
   const trace = new Trace3(traceProps2);
+  trace._inflatedPcbTrace = pcbTrace ?? void 0;
   subcircuit.add(trace);
 }
 
@@ -20755,7 +20801,7 @@ import { identity as identity5 } from "transformation-matrix";
 var package_default = {
   name: "@tscircuit/core",
   type: "module",
-  version: "0.0.1232",
+  version: "0.0.1234",
   types: "dist/index.d.ts",
   main: "dist/index.js",
   module: "dist/index.js",
@@ -20792,7 +20838,7 @@ var package_default = {
     "@tscircuit/circuit-json-util": "^0.0.94",
     "@tscircuit/common": "^0.0.20",
     "@tscircuit/copper-pour-solver": "^0.0.29",
-    "@tscircuit/footprinter": "^0.0.351",
+    "@tscircuit/footprinter": "^0.0.357",
     "@tscircuit/infer-cable-insertion-point": "^0.0.2",
     "@tscircuit/infgrid-ijump-astar": "^0.0.35",
     "@tscircuit/jlcpcb-manufacturing-specs": "git+https://github.com/tscircuit/jlcpcb-manufacturing-specs#e08af159db01a37db007e33f0a7268d0e4a279a5",

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@tscircuit/core",
   "type": "module",
-  "version": "0.0.1233",
+  "version": "0.0.1235",
   "types": "dist/index.d.ts",
   "main": "dist/index.js",
   "module": "dist/index.js",
@@ -38,7 +38,7 @@
     "@tscircuit/circuit-json-util": "^0.0.94",
     "@tscircuit/common": "^0.0.20",
     "@tscircuit/copper-pour-solver": "^0.0.29",
-    "@tscircuit/footprinter": "^0.0.351",
+    "@tscircuit/footprinter": "^0.0.357",
     "@tscircuit/infer-cable-insertion-point": "^0.0.2",
     "@tscircuit/infgrid-ijump-astar": "^0.0.35",
     "@tscircuit/jlcpcb-manufacturing-specs": "git+https://github.com/tscircuit/jlcpcb-manufacturing-specs#e08af159db01a37db007e33f0a7268d0e4a279a5",