@tscircuit/checks 0.0.195 → 0.0.197

package/README.md

@@ -31,6 +31,7 @@ and output an array of arrays for any issues found.
 | [`checkSourceTracesHavePcbTraces`](./lib/check-source-traces-have-pcb-traces.ts) | Returns `pcb_trace_error` when source traces are missing corresponding `pcb_trace` routes. |
 | [`checkTracesAreContiguous`](./lib/check-traces-are-contiguous/check-traces-are-contiguous.ts) | Returns `pcb_trace_error` when trace endpoints are floating or do not connect as expected. |
 | [`checkViasOffBoard`](./lib/check-pcb-components-out-of-board/checkViasOffBoard.ts) | Returns `pcb_placement_error` if any PCB via lies outside or crosses the board boundary. |
+| [`checkCopperPourShorts`](./lib/check-copper-pour-shorts.ts) | Detects copper-pour contact with different-net traces, pads, plated holes, vias, and pours, respecting layers and BRep cutouts. Included in routing checks. |
 | [`checkCopperToBoardEdgeClearance`](./lib/check-copper-to-board-edge-clearance.ts) | Checks via, SMT-pad, plated-hole, and copper-pour geometry against the polygon board outline and required edge clearance. |
 
 ## Aggregate check runner functions
@@ -41,7 +42,7 @@ and output an array of arrays for any issues found.
 | [`runAllNetlistChecks`](./lib/run-all-checks.ts) | Runs netlist connectivity checks (currently `checkPinMustBeConnected`). |
 | [`runAllPinSpecificationChecks`](./lib/run-all-checks.ts) | Runs pin specification checks (e.g. `checkAllPinsInComponentAreUnderspecified`, `checkNoPowerPinDefined`, and `checkNoGroundPinDefined`). |
 | [`runAllSchematicChecks`](./lib/run-all-checks.ts) | Runs schematic-layout checks (`checkSchematicComponentExcessiveVerticalPadding`, `checkSchematicComponentMissingReferenceDesignatorText`, and `checkSchematicComponentPortsOutsideBody`). |
-| [`runAllRoutingChecks`](./lib/run-all-checks.ts) | Runs all routing checks currently enabled (`checkEachPcbPortConnectedToPcbTraces`, `checkSourceTracesHavePcbTraces`, `checkEachPcbTraceNonOverlapping`, `checkPadTraceClearance`, `checkViaTraceClearance`, same/different net via spacing, and `checkPcbTracesOutOfBoard`). Trace-obstacle pairs are classified before aggregation, so each pair produces one overlap or clearance diagnostic, never both. |
+| [`runAllRoutingChecks`](./lib/run-all-checks.ts) | Runs all routing checks currently enabled (`checkEachPcbPortConnectedToPcbTraces`, `checkSourceTracesHavePcbTraces`, `checkEachPcbTraceNonOverlapping`, `checkCopperPourShorts`, `checkPadTraceClearance`, `checkViaTraceClearance`, same/different net via spacing, and `checkPcbTracesOutOfBoard`). Trace-obstacle pairs are classified before aggregation, so each pair produces one overlap or clearance diagnostic, never both. |
 | [`runAllChecks`](./lib/run-all-checks.ts) | Runs placement, schematic, netlist, pin specification, and routing checks and returns a combined list of issues. |
 
 ## Consolidated placement overlaps

package/dist/index.d.ts

@@ -1,7 +1,10 @@
 import * as circuit_json from 'circuit-json';
-import { AnyCircuitElement, PcbPortNotConnectedError, PcbTraceError, PcbPlacementError, PcbComponentOutsideBoardError, PcbViaClearanceError, PcbTraceWarning, PcbTraceMissingError, PcbFootprintOverlapError, PcbPadPadClearanceError, PcbCourtyardOverlapError, PcbComponentMissingCourtyardWarning, PcbTraceTooLongWarning, PcbPadTraceClearanceError, PcbViaTraceClearanceError, SourceComponentMisconfiguredError, SourceComponentPinsUnderspecifiedWarning, SourceNoPowerPinDefinedWarning, SourceNoGroundPinDefinedWarning, SchematicComponentStylingWarning, PcbConnectorNotInAccessibleOrientationWarning, SourceConfusingNetNameWarning } from 'circuit-json';
+import { AnyCircuitElement, PcbPlacementError, PcbPortNotConnectedError, PcbTraceError, PcbComponentOutsideBoardError, PcbViaClearanceError, PcbTraceWarning, PcbTraceMissingError, PcbFootprintOverlapError, PcbPadPadClearanceError, PcbCourtyardOverlapError, PcbComponentMissingCourtyardWarning, PcbTraceTooLongWarning, PcbPadTraceClearanceError, PcbViaTraceClearanceError, SourceComponentMisconfiguredError, SourceComponentPinsUnderspecifiedWarning, SourceNoPowerPinDefinedWarning, SourceNoGroundPinDefinedWarning, SchematicComponentStylingWarning, PcbConnectorNotInAccessibleOrientationWarning, SourceConfusingNetNameWarning } from 'circuit-json';
 import { ConnectivityMap } from 'circuit-json-to-connectivity-map';
 
+/** Detect accidental copper contact, rather than enforcing a clearance margin. */
+declare function checkCopperPourShorts(circuitJson: AnyCircuitElement[]): PcbPlacementError[];
+
 declare function checkEachPcbPortConnectedToPcbTraces(circuitJson: AnyCircuitElement[]): PcbPortNotConnectedError[];
 
 declare function checkEachPcbTraceNonOverlapping(circuitJson: AnyCircuitElement[], { connMap, minClearance, }?: {
@@ -213,8 +216,8 @@ declare function runAllNetlistChecks(circuitJson: AnyCircuitElement[]): Promise<
 } | circuit_json.SourceComponentMisconfiguredError | circuit_json.SourceConfusingNetNameWarning)[]>;
 declare function runAllSchematicChecks(circuitJson: AnyCircuitElement[]): Promise<circuit_json.SchematicComponentStylingWarning[]>;
 declare function runAllPinSpecificationChecks(circuitJson: AnyCircuitElement[]): Promise<(circuit_json.SourceComponentPinsUnderspecifiedWarning | circuit_json.SourceNoPowerPinDefinedWarning | circuit_json.SourceNoGroundPinDefinedWarning)[]>;
-declare function runAllRoutingChecks(circuitJson: AnyCircuitElement[]): Promise<(circuit_json.PcbPortNotConnectedError | circuit_json.PcbTraceError | circuit_json.PcbViaClearanceError | circuit_json.PcbTraceMissingError | circuit_json.PcbPadPadClearanceError | circuit_json.PcbTraceTooLongWarning | circuit_json.PcbPadTraceClearanceError | circuit_json.PcbViaTraceClearanceError)[]>;
-declare function runAllChecks(circuitJson: AnyCircuitElement[]): Promise<(circuit_json.PcbPortNotConnectedError | circuit_json.PcbTraceError | circuit_json.PcbPlacementError | circuit_json.PcbComponentOutsideBoardError | circuit_json.PcbViaClearanceError | circuit_json.PcbTraceMissingError | PcbComponentOverlapError | circuit_json.PcbPadPadClearanceError | circuit_json.PcbCourtyardOverlapError | circuit_json.PcbComponentMissingCourtyardWarning | circuit_json.PcbTraceTooLongWarning | circuit_json.PcbPadTraceClearanceError | circuit_json.PcbViaTraceClearanceError | {
+declare function runAllRoutingChecks(circuitJson: AnyCircuitElement[]): Promise<(circuit_json.PcbPlacementError | circuit_json.PcbPortNotConnectedError | circuit_json.PcbTraceError | circuit_json.PcbViaClearanceError | circuit_json.PcbTraceMissingError | circuit_json.PcbPadPadClearanceError | circuit_json.PcbTraceTooLongWarning | circuit_json.PcbPadTraceClearanceError | circuit_json.PcbViaTraceClearanceError)[]>;
+declare function runAllChecks(circuitJson: AnyCircuitElement[]): Promise<(circuit_json.PcbPlacementError | circuit_json.PcbPortNotConnectedError | circuit_json.PcbTraceError | circuit_json.PcbComponentOutsideBoardError | circuit_json.PcbViaClearanceError | circuit_json.PcbTraceMissingError | PcbComponentOverlapError | circuit_json.PcbPadPadClearanceError | circuit_json.PcbCourtyardOverlapError | circuit_json.PcbComponentMissingCourtyardWarning | circuit_json.PcbTraceTooLongWarning | circuit_json.PcbPadTraceClearanceError | circuit_json.PcbViaTraceClearanceError | {
     type: "source_pin_must_be_connected_error";
     source_pin_must_be_connected_error_id: string;
     error_type: "source_pin_must_be_connected_error";
@@ -236,4 +239,4 @@ declare function checkTestPointAccessibility(circuitJson: AnyCircuitElement[]):
 /** Warn once per name when its source nets belong to multiple electrical islands. */
 declare function checkSameNameNetsAreConnected(circuitJson: AnyCircuitElement[]): SourceConfusingNetNameWarning[];
 
-export { NetManager, type PcbComponentOverlapError, checkAllPinsInComponentAreUnderspecified, checkConnectorAccessibleOrientation, checkCopperToBoardEdgeClearance, checkDifferentNetViaSpacing, checkEachPcbPortConnectedToPcbTraces, checkEachPcbTraceNonOverlapping, checkNoGroundPinDefined, checkNoPowerPinDefined, checkPadPadClearance, checkPadTraceClearance, checkPcbComponentOverCutout, checkPcbComponentOverlap, checkPcbComponentsMissingCourtyard, checkPcbComponentsOutOfBoard, checkPcbCopperOverKeepout, checkPcbTraceLengths, checkPcbTraceViaCounts, checkPcbTracesOutOfBoard, checkPinMustBeConnected, checkSameNameNetsAreConnected, checkSameNetViaSpacing, checkSchematicComponentExcessiveVerticalPadding, checkSchematicComponentMissingReferenceDesignatorText, checkSchematicComponentPortsOutsideBody, checkSourceTracesHavePcbTraces, checkSourceTracesMatchPcbTraceThickness, checkTestPointAccessibility, checkTracesAreContiguous, checkTwoTerminalSwitchContactsOnDifferentNets, checkViaPadClearance, checkViaTraceClearance, checkViasInPads, checkViasOffBoard, consolidatePcbOverlapErrors, dedupePcbDrcErrors, runAllChecks, runAllNetlistChecks, runAllPinSpecificationChecks, runAllPlacementChecks, runAllRoutingChecks, runAllSchematicChecks };
+export { NetManager, type PcbComponentOverlapError, checkAllPinsInComponentAreUnderspecified, checkConnectorAccessibleOrientation, checkCopperPourShorts, checkCopperToBoardEdgeClearance, checkDifferentNetViaSpacing, checkEachPcbPortConnectedToPcbTraces, checkEachPcbTraceNonOverlapping, checkNoGroundPinDefined, checkNoPowerPinDefined, checkPadPadClearance, checkPadTraceClearance, checkPcbComponentOverCutout, checkPcbComponentOverlap, checkPcbComponentsMissingCourtyard, checkPcbComponentsOutOfBoard, checkPcbCopperOverKeepout, checkPcbTraceLengths, checkPcbTraceViaCounts, checkPcbTracesOutOfBoard, checkPinMustBeConnected, checkSameNameNetsAreConnected, checkSameNetViaSpacing, checkSchematicComponentExcessiveVerticalPadding, checkSchematicComponentMissingReferenceDesignatorText, checkSchematicComponentPortsOutsideBody, checkSourceTracesHavePcbTraces, checkSourceTracesMatchPcbTraceThickness, checkTestPointAccessibility, checkTracesAreContiguous, checkTwoTerminalSwitchContactsOnDifferentNets, checkViaPadClearance, checkViaTraceClearance, checkViasInPads, checkViasOffBoard, consolidatePcbOverlapErrors, dedupePcbDrcErrors, runAllChecks, runAllNetlistChecks, runAllPinSpecificationChecks, runAllPlacementChecks, runAllRoutingChecks, runAllSchematicChecks };