@tscircuit/3d-viewer 0.0.603 → 0.0.604

package/dist/index.js

@@ -14436,7 +14436,7 @@ import { useCallback as useCallback24, useEffect as useEffect49, useRef as useRe
 import * as THREE51 from "three";
 
 // src/CadViewerJscad.tsx
-import { su as su11 } from "@tscircuit/circuit-json-util";
+import { su as su12 } from "@tscircuit/circuit-json-util";
 import { forwardRef as forwardRef3, useMemo as useMemo22 } from "react";
 
 // src/utils/get-cad-pcb-context.ts
@@ -39243,7 +39243,7 @@ var package_default = {
     "@jscad/regl-renderer": "^2.6.12",
     "@jscad/stl-serializer": "^2.1.20",
     "circuit-json": "^0.0.497",
-    "circuit-to-canvas": "^0.0.123",
+    "circuit-to-canvas": "^0.0.131",
     "react-hot-toast": "^2.6.0",
     three: "^0.165.0",
     "three-stdlib": "^2.36.0",
@@ -39291,7 +39291,7 @@ var package_default = {
     "vite-tsconfig-paths": "^4.3.2",
     "@tscircuit/core": "^0.0.1955",
     "@tscircuit/props": "^0.0.664",
-    "@tscircuit/circuit-json-util": "^0.0.114"
+    "@tscircuit/circuit-json-util": "^0.0.116"
   },
   patchedDependencies: {
     "@tscircuit/fanout-solver@0.0.78": "patches/@tscircuit%2Ffanout-solver@0.0.78.patch"
@@ -41273,7 +41273,7 @@ var import_booleans4 = __toESM(require_booleans(), 1);
 var import_extrusions4 = __toESM(require_extrusions(), 1);
 var import_transforms6 = __toESM(require_transforms(), 1);
 var import_primitives6 = __toESM(require_primitives(), 1);
-import { su as su4 } from "@tscircuit/circuit-json-util";
+import { su as su5 } from "@tscircuit/circuit-json-util";
 
 // src/geoms/create-hole-with-polygon-pad.ts
 var import_primitives3 = __toESM(require_primitives(), 1);
@@ -41933,6 +41933,51 @@ function createViaBoardDrill({
   return drill;
 }
 
+// src/utils/get-pcb-vias.ts
+import { createBoardOwnerMap, su as su4 } from "@tscircuit/circuit-json-util";
+function getPcbVias(circuitJson) {
+  const boardOwnerMap = createBoardOwnerMap(circuitJson);
+  const vias = [...su4(circuitJson).pcb_via.list()];
+  const viasByPosition = /* @__PURE__ */ new Map();
+  for (const via of vias) {
+    const board = boardOwnerMap.get(via.pcb_via_id);
+    const positionKey = `${board?.pcb_board_id ?? ""}:${via.x}:${via.y}`;
+    const viasAtPosition = viasByPosition.get(positionKey) ?? [];
+    viasAtPosition.push(via);
+    viasByPosition.set(positionKey, viasAtPosition);
+  }
+  for (const trace of su4(circuitJson).pcb_trace.list()) {
+    const board = boardOwnerMap.get(trace.pcb_trace_id);
+    for (const [index2, point] of trace.route.entries()) {
+      if (point.route_type !== "via") continue;
+      const positionKey = `${board?.pcb_board_id ?? ""}:${point.x}:${point.y}`;
+      const viasAtPosition = viasByPosition.get(positionKey) ?? [];
+      const hasMatchingVia = viasAtPosition.some(
+        (via2) => via2.layers.includes(point.from_layer) && via2.layers.includes(point.to_layer)
+      );
+      if (hasMatchingVia) continue;
+      const via = {
+        type: "pcb_via",
+        pcb_via_id: `${trace.pcb_trace_id}_route_via_${index2}`,
+        pcb_trace_id: trace.pcb_trace_id,
+        subcircuit_id: trace.subcircuit_id,
+        pcb_group_id: trace.pcb_group_id,
+        x: point.x,
+        y: point.y,
+        layers: [point.from_layer, point.to_layer],
+        hole_diameter: point.hole_diameter ?? board?.min_via_hole_diameter ?? 0.25,
+        outer_diameter: point.outer_diameter ?? board?.min_via_pad_diameter ?? 0.6,
+        tented_on_top: point.tented_on_top,
+        tented_on_bottom: point.tented_on_bottom
+      };
+      vias.push(via);
+      viasAtPosition.push(via);
+      viasByPosition.set(positionKey, viasAtPosition);
+    }
+  }
+  return vias;
+}
+
 // src/BoardGeomBuilder.ts
 var PAD_ROUNDED_SEGMENTS = 64;
 var BOARD_CLIP_Z_MARGIN = 1;
@@ -41967,7 +42012,7 @@ var BoardGeomBuilder = class {
     const panels = circuitJson.filter(
       (e) => e.type === "pcb_panel"
     );
-    const boards = su4(circuitJson).pcb_board.list();
+    const boards = su5(circuitJson).pcb_board.list();
     if (panels.length > 0) {
       const panel = panels[0];
       const firstBoardInPanel = boards.find(
@@ -41988,10 +42033,10 @@ var BoardGeomBuilder = class {
       const boardsNotInPanel = boards.filter((b) => !b.pcb_panel_id);
       this.board = boardsNotInPanel[0];
     }
-    this.plated_holes = su4(circuitJson).pcb_plated_hole.list();
-    this.holes = su4(circuitJson).pcb_hole.list();
-    this.pcb_vias = su4(circuitJson).pcb_via.list();
-    this.pcb_cutouts = su4(circuitJson).pcb_cutout.list();
+    this.plated_holes = su5(circuitJson).pcb_plated_hole.list();
+    this.holes = su5(circuitJson).pcb_hole.list();
+    this.pcb_vias = getPcbVias(circuitJson);
+    this.pcb_cutouts = su5(circuitJson).pcb_cutout.list();
     this.ctx = { pcbThickness: this.board.thickness ?? 1.2 };
     this.initializeBoard();
   }
@@ -42693,7 +42738,7 @@ var ErrorBox = ({ parent }) => {
 };
 
 // src/three-components/JscadBoardTextures.tsx
-import { su as su8 } from "@tscircuit/circuit-json-util";
+import { su as su9 } from "@tscircuit/circuit-json-util";
 import { useEffect as useEffect25, useMemo as useMemo20 } from "react";
 
 // src/textures/create-combined-board-textures.ts
@@ -42750,7 +42795,7 @@ function calculateOutlineBounds(boardData) {
 }
 
 // src/utils/pad-texture.ts
-import { su as su5 } from "@tscircuit/circuit-json-util";
+import { su as su6 } from "@tscircuit/circuit-json-util";
 import { CircuitToCanvasDrawer } from "circuit-to-canvas";
 import * as THREE27 from "three";
 function createPadTextureForLayer({
@@ -42760,13 +42805,13 @@ function createPadTextureForLayer({
   copperColor,
   traceTextureResolution
 }) {
-  const pcbSmtPads = su5(circuitJson).pcb_smtpad.list();
+  const pcbSmtPads = su6(circuitJson).pcb_smtpad.list();
   const smtPadsOnLayer = pcbSmtPads.filter((pad2) => pad2.layer === layer);
   if (smtPadsOnLayer.length === 0) return null;
-  const holes = su5(circuitJson).pcb_hole.list();
-  const platedHolesOnLayer = su5(circuitJson).pcb_plated_hole.list().filter((e) => !Array.isArray(e.layers) || e.layers.includes(layer));
-  const viasOnLayer = su5(circuitJson).pcb_via.list().filter((e) => !Array.isArray(e.layers) || e.layers.includes(layer));
-  const cutouts = su5(circuitJson).pcb_cutout.list();
+  const holes = su6(circuitJson).pcb_hole.list();
+  const platedHolesOnLayer = su6(circuitJson).pcb_plated_hole.list().filter((e) => !Array.isArray(e.layers) || e.layers.includes(layer));
+  const viasOnLayer = su6(circuitJson).pcb_via.list().filter((e) => !Array.isArray(e.layers) || e.layers.includes(layer));
+  const cutouts = su6(circuitJson).pcb_cutout.list();
   const drillElements = [...holes, ...platedHolesOnLayer, ...viasOnLayer];
   const pcbRenderLayer = layer === "top" ? "top_copper" : "bottom_copper";
   const boardOutlineBounds = calculateOutlineBounds(boardData);
@@ -42842,7 +42887,7 @@ function createPadTextureForLayer({
 }
 
 // src/utils/panel-outline-texture.ts
-import { su as su6 } from "@tscircuit/circuit-json-util";
+import { su as su7 } from "@tscircuit/circuit-json-util";
 import * as THREE28 from "three";
 var resolvePanelIdForTexture = (circuitJson) => {
   const panels = circuitJson.filter(
@@ -42861,7 +42906,7 @@ function createPanelOutlineTextureForLayer({
 }) {
   const panelId = resolvePanelIdForTexture(circuitJson);
   if (!panelId) return null;
-  const allBoards = su6(circuitJson).pcb_board.list();
+  const allBoards = su7(circuitJson).pcb_board.list();
   const boardsInPanel = allBoards.filter(
     (b) => b.pcb_panel_id === panelId || b.position_mode === "relative_to_panel_anchor" && !b.pcb_panel_id
   );
@@ -42923,43 +42968,7 @@ function createPanelOutlineTextureForLayer({
 // src/utils/trace-texture.ts
 import * as THREE29 from "three";
 import { CircuitToCanvasDrawer as CircuitToCanvasDrawer2 } from "circuit-to-canvas";
-import { getElementRenderLayers, su as su7 } from "@tscircuit/circuit-json-util";
-
-// src/utils/trace-layer-segments.ts
-function isWireRoutePoint(point) {
-  return point && point.route_type === "wire" && typeof point.layer === "string" && typeof point.width === "number";
-}
-function splitTraceIntoLayerSegments(trace, layer) {
-  const segments = [];
-  let currentRoute = [];
-  const pushCurrentSegment = () => {
-    if (currentRoute.length < 2) {
-      currentRoute = [];
-      return;
-    }
-    segments.push({
-      ...trace,
-      pcb_trace_id: `${trace.pcb_trace_id}_${layer}_${segments.length}`,
-      route: currentRoute
-    });
-    currentRoute = [];
-  };
-  for (const point of trace.route) {
-    if (!isWireRoutePoint(point)) {
-      pushCurrentSegment();
-      continue;
-    }
-    if (point.layer !== layer) {
-      pushCurrentSegment();
-      continue;
-    }
-    currentRoute.push(point);
-  }
-  pushCurrentSegment();
-  return segments;
-}
-
-// src/utils/trace-texture.ts
+import { getElementRenderLayers, su as su8 } from "@tscircuit/circuit-json-util";
 function createTraceTextureForLayer({
   layer,
   circuitJson,
@@ -42967,11 +42976,13 @@ function createTraceTextureForLayer({
   traceColor,
   traceTextureResolution
 }) {
-  const pcbTraces = su7(circuitJson).pcb_trace.list();
-  const pcbVias = su7(circuitJson).pcb_via.list();
-  const pcbPlatedHoles = su7(circuitJson).pcb_plated_hole.list();
+  const pcbTraces = su8(circuitJson).pcb_trace.list();
+  const pcbVias = su8(circuitJson).pcb_via.list();
+  const pcbPlatedHoles = su8(circuitJson).pcb_plated_hole.list();
   const pcbRenderLayer = layer === "top" ? "top_copper" : "bottom_copper";
-  const tracesOnLayer = pcbTraces.filter((trace) => getElementRenderLayers(trace).includes(pcbRenderLayer)).flatMap((trace) => splitTraceIntoLayerSegments(trace, layer));
+  const tracesOnLayer = pcbTraces.filter(
+    (trace) => getElementRenderLayers(trace).includes(pcbRenderLayer)
+  );
   if (tracesOnLayer.length === 0) return null;
   const platedHolesOnLayer = pcbPlatedHoles.filter(
     (hole) => hole.layers.includes(layer)
@@ -43805,6 +43816,22 @@ import * as THREE35 from "three";
 import { CircuitToCanvasDrawer as CircuitToCanvasDrawer8 } from "circuit-to-canvas";
 var FABRICATION_NOTE_COLOR2 = "rgb(255,243,204)";
 var TRANSPARENT3 = "rgba(0,0,0,0)";
+var isViaTented = (via, layer, board) => {
+  const viaTenting = layer === "top" ? via.tented_on_top : via.tented_on_bottom;
+  const legacyTenting = "is_tented" in via ? via.is_tented : void 0;
+  const boardDefault = layer === "top" ? board?.default_via_tented_on_top : board?.default_via_tented_on_bottom;
+  return viaTenting ?? legacyTenting ?? boardDefault ?? false;
+};
+var isOpenSurfaceAperture = (element, layer, board, soldermaskVisible) => {
+  if (element.type === "pcb_cutout") return true;
+  if (element.type === "pcb_via") {
+    return !soldermaskVisible || !isViaTented(element, layer, board);
+  }
+  if (element.type === "pcb_hole" || element.type === "pcb_plated_hole") {
+    return !soldermaskVisible || element.is_covered_with_solder_mask !== true;
+  }
+  return false;
+};
 var setDrawerBounds5 = (drawer, bounds) => {
   drawer.setCameraBounds({
     minX: bounds.minX,
@@ -43818,8 +43845,9 @@ var drawSilkscreenLayer = ({
   layer,
   bounds,
   elements,
-  apertureElements,
-  silkscreenColor
+  circuitJson,
+  silkscreenColor,
+  soldermaskVisible
 }) => {
   const renderLayer = layer === "top" ? "top_silkscreen" : "bottom_silkscreen";
   const drawer = new CircuitToCanvasDrawer8(ctx);
@@ -43869,8 +43897,26 @@ var drawSilkscreenLayer = ({
     }
   });
   setDrawerBounds5(drawer, bounds);
-  drawer.drawElements([...elements, ...apertureElements], {
+  drawer.drawElements(elements, {
     layers: [renderLayer],
+    clipContextElements: circuitJson
+  });
+  const apertureElements = circuitJson.flatMap(
+    (element) => {
+      if (element.type === "pcb_trace") {
+        const board2 = ctx.boardOwnerMap?.get(element.pcb_trace_id);
+        const route = element.route.filter(
+          (point) => point.route_type === "via" && (!soldermaskVisible || !isViaTented(point, layer, board2))
+        );
+        return route.length ? [{ ...element, route }] : [];
+      }
+      const board = element.type === "pcb_via" ? ctx.boardOwnerMap?.get(element.pcb_via_id) : void 0;
+      return isOpenSurfaceAperture(element, layer, board, soldermaskVisible) ? [element] : [];
+    }
+  );
+  drawer.drawElements(apertureElements, {
+    layers: [renderLayer],
+    clipContextElements: circuitJson,
     clearDrillHoles: true
   });
 };
@@ -43881,18 +43927,6 @@ var isSilkscreenElement = (element, layer) => {
   const elementType = element.type;
   return elementType.startsWith("pcb_silkscreen_");
 };
-var isOpenSurfaceAperture = (element, soldermaskVisible, layer) => {
-  if (element.type === "pcb_cutout") return true;
-  if (element.type === "pcb_via") {
-    const legacyTented = element.is_tented;
-    const tented = (layer === "top" ? element.tented_on_top : element.tented_on_bottom) ?? legacyTented;
-    return !soldermaskVisible || tented !== true;
-  }
-  if (element.type === "pcb_hole" || element.type === "pcb_plated_hole") {
-    return !soldermaskVisible || element.is_covered_with_solder_mask !== true;
-  }
-  return false;
-};
 function createSilkscreenTextureForLayer({
   layer,
   circuitJson,
@@ -43905,9 +43939,6 @@ function createSilkscreenTextureForLayer({
     (element) => isSilkscreenElement(element, layer)
   );
   if (elements.length === 0) return null;
-  const apertureElements = circuitJson.filter(
-    (element) => isOpenSurfaceAperture(element, soldermaskVisible, layer)
-  );
   const bounds = getSoldermaskRenderBounds(circuitJson, boardData);
   const canvasWidth = Math.floor(bounds.width * traceTextureResolution);
   const canvasHeight = Math.floor(bounds.height * traceTextureResolution);
@@ -43926,8 +43957,9 @@ function createSilkscreenTextureForLayer({
     layer,
     bounds,
     elements,
-    apertureElements,
-    silkscreenColor
+    circuitJson,
+    silkscreenColor,
+    soldermaskVisible
   });
   const texture = new THREE35.CanvasTexture(canvas);
   texture.generateMipmaps = true;
@@ -44870,7 +44902,7 @@ function JscadBoardTextures({
     const panels = circuitJson.filter(
       (e) => e.type === "pcb_panel"
     );
-    const boards = su8(circuitJson).pcb_board.list();
+    const boards = su9(circuitJson).pcb_board.list();
     if (panels.length > 0) {
       const panel = panels[0];
       const firstBoardInPanel = boards.find(
@@ -45146,16 +45178,16 @@ function VisibleSTLModel({
 }
 
 // src/utils/preprocess-circuit-json.ts
-import { su as su10 } from "@tscircuit/circuit-json-util";
+import { su as su11 } from "@tscircuit/circuit-json-util";
 
 // src/utils/create-faux-board.ts
-import { su as su9, getBoundsOfPcbElements } from "@tscircuit/circuit-json-util";
+import { su as su10, getBoundsOfPcbElements } from "@tscircuit/circuit-json-util";
 function createFauxBoard(circuitJson) {
-  const cadComponents = su9(circuitJson).cad_component.list().filter((cad) => cad.pcb_component_id);
-  const pads = su9(circuitJson).pcb_smtpad.list();
-  const holes = su9(circuitJson).pcb_hole.list();
-  const platedHoles = su9(circuitJson).pcb_plated_hole.list();
-  const vias = su9(circuitJson).pcb_via.list();
+  const cadComponents = su10(circuitJson).cad_component.list().filter((cad) => cad.pcb_component_id);
+  const pads = su10(circuitJson).pcb_smtpad.list();
+  const holes = su10(circuitJson).pcb_hole.list();
+  const platedHoles = su10(circuitJson).pcb_plated_hole.list();
+  const vias = su10(circuitJson).pcb_via.list();
   if (cadComponents.length === 0 && pads.length === 0 && holes.length === 0 && platedHoles.length === 0 && vias.length === 0) {
     return null;
   }
@@ -45204,7 +45236,7 @@ function createFauxBoard(circuitJson) {
 
 // src/utils/preprocess-circuit-json.ts
 function addFauxBoardIfNeeded(circuitJson) {
-  const boards = su10(circuitJson).pcb_board.list();
+  const boards = su11(circuitJson).pcb_board.list();
   if (boards.length > 0) {
     return circuitJson;
   }
@@ -45256,7 +45288,7 @@ var CadViewerJscad = forwardRef3(
     const initialCameraPosition = useMemo22(() => {
       if (!internalCircuitJson) return [5, -5, 5];
       try {
-        const board = su11(internalCircuitJson).pcb_board.list()[0];
+        const board = su12(internalCircuitJson).pcb_board.list()[0];
         if (!board) return [5, -5, 5];
         const { width: width10, height: height10 } = board;
         if (!width10 && !height10) {
@@ -45282,7 +45314,7 @@ var CadViewerJscad = forwardRef3(
     const isFauxBoard = useMemo22(() => {
       if (!internalCircuitJson) return false;
       try {
-        const board = su11(internalCircuitJson).pcb_board.list()[0];
+        const board = su12(internalCircuitJson).pcb_board.list()[0];
         return !!board && board.pcb_board_id === "faux-board";
       } catch (e) {
         return false;
@@ -45291,7 +45323,7 @@ var CadViewerJscad = forwardRef3(
     const boardDimensions = useMemo22(() => {
       if (!internalCircuitJson) return void 0;
       try {
-        const board = su11(internalCircuitJson).pcb_board.list()[0];
+        const board = su12(internalCircuitJson).pcb_board.list()[0];
         if (!board) return void 0;
         const bounds = calculateOutlineBounds(board);
         return { width: bounds.width, height: bounds.height };
@@ -45303,7 +45335,7 @@ var CadViewerJscad = forwardRef3(
     const boardCenter = useMemo22(() => {
       if (!internalCircuitJson) return void 0;
       try {
-        const board = su11(internalCircuitJson).pcb_board.list()[0];
+        const board = su12(internalCircuitJson).pcb_board.list()[0];
         if (!board) return void 0;
         const bounds = calculateOutlineBounds(board);
         return { x: bounds.centerX, y: bounds.centerY };
@@ -45314,7 +45346,7 @@ var CadViewerJscad = forwardRef3(
     }, [internalCircuitJson]);
     const pcbThickness = usePcbThickness(internalCircuitJson);
     const { stls: boardStls, loading } = useStlsFromGeom(boardGeom);
-    const cad_components = su11(internalCircuitJson).cad_component.list();
+    const cad_components = su12(internalCircuitJson).cad_component.list();
     return /* @__PURE__ */ jsxs5(
       CadViewerContainer,
       {
@@ -45437,7 +45469,7 @@ function createManifoldBoard(Manifold, CrossSection, boardData, pcbThickness, ma
 }
 
 // src/utils/manifold/process-cutouts.ts
-import { su as su12 } from "@tscircuit/circuit-json-util";
+import { su as su13 } from "@tscircuit/circuit-json-util";
 
 // src/utils/pad-geoms.ts
 var RECT_PAD_SEGMENTS2 = 64;
@@ -45496,7 +45528,7 @@ var arePointsClockwise3 = (points) => {
 };
 function processCutoutsForManifold(Manifold, CrossSection, circuitJson, pcbThickness, manifoldInstancesForCleanup) {
   const cutoutOps = [];
-  const pcbCutouts = su12(circuitJson).pcb_cutout.list();
+  const pcbCutouts = su13(circuitJson).pcb_cutout.list();
   for (const cutout of pcbCutouts) {
     let cutoutOp;
     const cutoutHeight = pcbThickness * 1.5;
@@ -45591,7 +45623,7 @@ function processCutoutsForManifold(Manifold, CrossSection, circuitJson, pcbThick
 }
 
 // src/utils/manifold/process-non-plated-holes.ts
-import { su as su13 } from "@tscircuit/circuit-json-util";
+import { su as su14 } from "@tscircuit/circuit-json-util";
 
 // src/utils/hole-geoms.ts
 function createCircleHoleDrill({
@@ -45634,7 +45666,7 @@ function createPlatedHoleDrill({
 // src/utils/manifold/process-non-plated-holes.ts
 function processNonPlatedHolesForManifold(Manifold, CrossSection, circuitJson, pcbThickness, manifoldInstancesForCleanup) {
   const nonPlatedHoleBoardDrills = [];
-  const pcbHoles = su13(circuitJson).pcb_hole.list();
+  const pcbHoles = su14(circuitJson).pcb_hole.list();
   const createPillOp = (width10, height10, depth) => {
     const pillOp = createRoundedRectPrism({
       Manifold,
@@ -45724,7 +45756,7 @@ function processNonPlatedHolesForManifold(Manifold, CrossSection, circuitJson, p
 }
 
 // src/utils/manifold/process-plated-holes.ts
-import { su as su14 } from "@tscircuit/circuit-json-util";
+import { su as su15 } from "@tscircuit/circuit-json-util";
 import * as THREE45 from "three";
 
 // src/utils/manifold-mesh-to-three-geometry.ts
@@ -45776,7 +45808,7 @@ var PLATED_HOLE_SURFACE_CLEARANCE = 5e-4;
 var PLATED_HOLE_FILL_CLEARANCE = 4e-3;
 function processPlatedHolesForManifold(Manifold, CrossSection, circuitJson, pcbThickness, manifoldInstancesForCleanup, boardClipVolume) {
   const platedHoleBoardDrills = [];
-  const pcbPlatedHoles = su14(circuitJson).pcb_plated_hole.list();
+  const pcbPlatedHoles = su15(circuitJson).pcb_plated_hole.list();
   const platedHoleCopperGeoms = [];
   const platedHoleCopperOpsForSubtract = [];
   const createPillOp = (width10, height10, depth) => {
@@ -46399,7 +46431,6 @@ function processPlatedHolesForManifold(Manifold, CrossSection, circuitJson, pcbT
 }
 
 // src/utils/manifold/process-vias.ts
-import { su as su15 } from "@tscircuit/circuit-json-util";
 import * as THREE46 from "three";
 
 // src/utils/via-geoms.ts
@@ -46441,7 +46472,7 @@ function createViaCopper2({
 var COPPER_COLOR2 = new THREE46.Color(...colors.copper);
 function processViasForManifold(Manifold, circuitJson, pcbThickness, manifoldInstancesForCleanup, boardClipVolume) {
   const viaBoardDrills = [];
-  const pcbVias = su15(circuitJson).pcb_via.list();
+  const pcbVias = getPcbVias(circuitJson);
   const viaCopperGeoms = [];
   pcbVias.forEach((via, index2) => {
     if (typeof via.hole_diameter === "number") {

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@tscircuit/3d-viewer",
-  "version": "0.0.603",
+  "version": "0.0.604",
   "repository": {
     "type": "git",
     "url": "https://github.com/tscircuit/3d-viewer"
@@ -39,7 +39,7 @@
     "@jscad/regl-renderer": "^2.6.12",
     "@jscad/stl-serializer": "^2.1.20",
     "circuit-json": "^0.0.497",
-    "circuit-to-canvas": "^0.0.123",
+    "circuit-to-canvas": "^0.0.131",
     "react-hot-toast": "^2.6.0",
     "three": "^0.165.0",
     "three-stdlib": "^2.36.0",
@@ -87,7 +87,7 @@
     "vite-tsconfig-paths": "^4.3.2",
     "@tscircuit/core": "^0.0.1955",
     "@tscircuit/props": "^0.0.664",
-    "@tscircuit/circuit-json-util": "^0.0.114"
+    "@tscircuit/circuit-json-util": "^0.0.116"
   },
   "patchedDependencies": {
     "@tscircuit/fanout-solver@0.0.78": "patches/@tscircuit%2Ffanout-solver@0.0.78.patch"