@tscircuit/3d-viewer 0.0.440 → 0.0.442

package/dist/index.js

@@ -144,8 +144,8 @@ var require_dist = __commonJS({
           fromValues: (x, y) => [x, y]
         },
         vec3: {
-          create: (x, y, z134) => [x, y, z134],
-          fromValues: (x, y, z134) => [x, y, z134]
+          create: (x, y, z135) => [x, y, z135],
+          fromValues: (x, y, z135) => [x, y, z135]
         }
       },
       geometries: {
@@ -532,29 +532,29 @@ var require_fromRotation = __commonJS({
     var { sin: sin2, cos: cos2 } = require_trigonometry();
     var identity = require_identity();
     var fromRotation = (out, rad, axis) => {
-      let [x, y, z134] = axis;
-      const lengthSquared = x * x + y * y + z134 * z134;
+      let [x, y, z135] = axis;
+      const lengthSquared = x * x + y * y + z135 * z135;
       if (Math.abs(lengthSquared) < EPS) {
         return identity(out);
       }
       const len = 1 / Math.sqrt(lengthSquared);
       x *= len;
       y *= len;
-      z134 *= len;
+      z135 *= len;
       const s = sin2(rad);
       const c = cos2(rad);
       const t = 1 - c;
       out[0] = x * x * t + c;
-      out[1] = y * x * t + z134 * s;
-      out[2] = z134 * x * t - y * s;
+      out[1] = y * x * t + z135 * s;
+      out[2] = z135 * x * t - y * s;
       out[3] = 0;
-      out[4] = x * y * t - z134 * s;
+      out[4] = x * y * t - z135 * s;
       out[5] = y * y * t + c;
-      out[6] = z134 * y * t + x * s;
+      out[6] = z135 * y * t + x * s;
       out[7] = 0;
-      out[8] = x * z134 * t + y * s;
-      out[9] = y * z134 * t - x * s;
-      out[10] = z134 * z134 * t + c;
+      out[8] = x * z135 * t + y * s;
+      out[9] = y * z135 * t - x * s;
+      out[10] = z135 * z135 * t + c;
       out[11] = 0;
       out[12] = 0;
       out[13] = 0;
@@ -808,8 +808,8 @@ var require_distance = __commonJS({
     var distance2 = (a, b) => {
       const x = b[0] - a[0];
       const y = b[1] - a[1];
-      const z134 = b[2] - a[2];
-      return Math.sqrt(x * x + y * y + z134 * z134);
+      const z135 = b[2] - a[2];
+      return Math.sqrt(x * x + y * y + z135 * z135);
     };
     module.exports = distance2;
   }
@@ -857,11 +857,11 @@ var require_fromValues2 = __commonJS({
   "node_modules/@jscad/modeling/src/maths/vec3/fromValues.js"(exports, module) {
     "use strict";
     var create = require_create2();
-    var fromValues = (x, y, z134) => {
+    var fromValues = (x, y, z135) => {
       const out = create();
       out[0] = x;
       out[1] = y;
-      out[2] = z134;
+      out[2] = z135;
       return out;
     };
     module.exports = fromValues;
@@ -872,10 +872,10 @@ var require_fromValues2 = __commonJS({
 var require_fromVec2 = __commonJS({
   "node_modules/@jscad/modeling/src/maths/vec3/fromVec2.js"(exports, module) {
     "use strict";
-    var fromVector2 = (out, vector, z134 = 0) => {
+    var fromVector2 = (out, vector, z135 = 0) => {
       out[0] = vector[0];
       out[1] = vector[1];
-      out[2] = z134;
+      out[2] = z135;
       return out;
     };
     module.exports = fromVector2;
@@ -889,8 +889,8 @@ var require_length = __commonJS({
     var length2 = (vector) => {
       const x = vector[0];
       const y = vector[1];
-      const z134 = vector[2];
-      return Math.sqrt(x * x + y * y + z134 * z134);
+      const z135 = vector[2];
+      return Math.sqrt(x * x + y * y + z135 * z135);
     };
     module.exports = length2;
   }
@@ -973,14 +973,14 @@ var require_normalize = __commonJS({
     var normalize = (out, vector) => {
       const x = vector[0];
       const y = vector[1];
-      const z134 = vector[2];
-      let len = x * x + y * y + z134 * z134;
+      const z135 = vector[2];
+      let len = x * x + y * y + z135 * z135;
       if (len > 0) {
         len = 1 / Math.sqrt(len);
       }
       out[0] = x * len;
       out[1] = y * len;
-      out[2] = z134 * len;
+      out[2] = z135 * len;
       return out;
     };
     module.exports = normalize;
@@ -1104,8 +1104,8 @@ var require_squaredDistance = __commonJS({
     var squaredDistance = (a, b) => {
       const x = b[0] - a[0];
       const y = b[1] - a[1];
-      const z134 = b[2] - a[2];
-      return x * x + y * y + z134 * z134;
+      const z135 = b[2] - a[2];
+      return x * x + y * y + z135 * z135;
     };
     module.exports = squaredDistance;
   }
@@ -1118,8 +1118,8 @@ var require_squaredLength = __commonJS({
     var squaredLength = (vector) => {
       const x = vector[0];
       const y = vector[1];
-      const z134 = vector[2];
-      return x * x + y * y + z134 * z134;
+      const z135 = vector[2];
+      return x * x + y * y + z135 * z135;
     };
     module.exports = squaredLength;
   }
@@ -1155,12 +1155,12 @@ var require_transform = __commonJS({
     var transform2 = (out, vector, matrix) => {
       const x = vector[0];
       const y = vector[1];
-      const z134 = vector[2];
-      let w = matrix[3] * x + matrix[7] * y + matrix[11] * z134 + matrix[15];
+      const z135 = vector[2];
+      let w = matrix[3] * x + matrix[7] * y + matrix[11] * z135 + matrix[15];
       w = w || 1;
-      out[0] = (matrix[0] * x + matrix[4] * y + matrix[8] * z134 + matrix[12]) / w;
-      out[1] = (matrix[1] * x + matrix[5] * y + matrix[9] * z134 + matrix[13]) / w;
-      out[2] = (matrix[2] * x + matrix[6] * y + matrix[10] * z134 + matrix[14]) / w;
+      out[0] = (matrix[0] * x + matrix[4] * y + matrix[8] * z135 + matrix[12]) / w;
+      out[1] = (matrix[1] * x + matrix[5] * y + matrix[9] * z135 + matrix[13]) / w;
+      out[2] = (matrix[2] * x + matrix[6] * y + matrix[10] * z135 + matrix[14]) / w;
       return out;
     };
     module.exports = transform2;
@@ -1362,8 +1362,8 @@ var require_isMirroring = __commonJS({
     var isMirroring = (matrix) => {
       const x = matrix[4] * matrix[9] - matrix[8] * matrix[5];
       const y = matrix[8] * matrix[1] - matrix[0] * matrix[9];
-      const z134 = matrix[0] * matrix[5] - matrix[4] * matrix[1];
-      const d = x * matrix[2] + y * matrix[6] + z134 * matrix[10];
+      const z135 = matrix[0] * matrix[5] - matrix[4] * matrix[1];
+      const d = x * matrix[2] + y * matrix[6] + z135 * matrix[10];
       return d < 0;
     };
     module.exports = isMirroring;
@@ -1464,16 +1464,16 @@ var require_rotate = __commonJS({
     var { EPS } = require_constants();
     var { sin: sin2, cos: cos2 } = require_trigonometry();
     var copy = require_copy();
-    var rotate2 = (out, matrix, radians, axis) => {
-      let [x, y, z134] = axis;
-      const lengthSquared = x * x + y * y + z134 * z134;
+    var rotate3 = (out, matrix, radians, axis) => {
+      let [x, y, z135] = axis;
+      const lengthSquared = x * x + y * y + z135 * z135;
       if (Math.abs(lengthSquared) < EPS) {
         return copy(out, matrix);
       }
       const len = 1 / Math.sqrt(lengthSquared);
       x *= len;
       y *= len;
-      z134 *= len;
+      z135 *= len;
       const s = sin2(radians);
       const c = cos2(radians);
       const t = 1 - c;
@@ -1490,14 +1490,14 @@ var require_rotate = __commonJS({
       const a22 = matrix[10];
       const a23 = matrix[11];
       const b00 = x * x * t + c;
-      const b01 = y * x * t + z134 * s;
-      const b02 = z134 * x * t - y * s;
-      const b10 = x * y * t - z134 * s;
+      const b01 = y * x * t + z135 * s;
+      const b02 = z135 * x * t - y * s;
+      const b10 = x * y * t - z135 * s;
       const b11 = y * y * t + c;
-      const b12 = z134 * y * t + x * s;
-      const b20 = x * z134 * t + y * s;
-      const b21 = y * z134 * t - x * s;
-      const b22 = z134 * z134 * t + c;
+      const b12 = z135 * y * t + x * s;
+      const b20 = x * z135 * t + y * s;
+      const b21 = y * z135 * t - x * s;
+      const b22 = z135 * z135 * t + c;
       out[0] = a00 * b00 + a10 * b01 + a20 * b02;
       out[1] = a01 * b00 + a11 * b01 + a21 * b02;
       out[2] = a02 * b00 + a12 * b01 + a22 * b02;
@@ -1518,7 +1518,7 @@ var require_rotate = __commonJS({
       }
       return out;
     };
-    module.exports = rotate2;
+    module.exports = rotate3;
   }
 });
 
@@ -1649,7 +1649,7 @@ var require_scale2 = __commonJS({
     var scale2 = (out, matrix, dimensions) => {
       const x = dimensions[0];
       const y = dimensions[1];
-      const z134 = dimensions[2];
+      const z135 = dimensions[2];
       out[0] = matrix[0] * x;
       out[1] = matrix[1] * x;
       out[2] = matrix[2] * x;
@@ -1658,10 +1658,10 @@ var require_scale2 = __commonJS({
       out[5] = matrix[5] * y;
       out[6] = matrix[6] * y;
       out[7] = matrix[7] * y;
-      out[8] = matrix[8] * z134;
-      out[9] = matrix[9] * z134;
-      out[10] = matrix[10] * z134;
-      out[11] = matrix[11] * z134;
+      out[8] = matrix[8] * z135;
+      out[9] = matrix[9] * z135;
+      out[10] = matrix[10] * z135;
+      out[11] = matrix[11] * z135;
       out[12] = matrix[12];
       out[13] = matrix[13];
       out[14] = matrix[14];
@@ -1715,7 +1715,7 @@ var require_translate = __commonJS({
     var translate10 = (out, matrix, offsets) => {
       const x = offsets[0];
       const y = offsets[1];
-      const z134 = offsets[2];
+      const z135 = offsets[2];
       let a00;
       let a01;
       let a02;
@@ -1729,10 +1729,10 @@ var require_translate = __commonJS({
       let a22;
       let a23;
       if (matrix === out) {
-        out[12] = matrix[0] * x + matrix[4] * y + matrix[8] * z134 + matrix[12];
-        out[13] = matrix[1] * x + matrix[5] * y + matrix[9] * z134 + matrix[13];
-        out[14] = matrix[2] * x + matrix[6] * y + matrix[10] * z134 + matrix[14];
-        out[15] = matrix[3] * x + matrix[7] * y + matrix[11] * z134 + matrix[15];
+        out[12] = matrix[0] * x + matrix[4] * y + matrix[8] * z135 + matrix[12];
+        out[13] = matrix[1] * x + matrix[5] * y + matrix[9] * z135 + matrix[13];
+        out[14] = matrix[2] * x + matrix[6] * y + matrix[10] * z135 + matrix[14];
+        out[15] = matrix[3] * x + matrix[7] * y + matrix[11] * z135 + matrix[15];
       } else {
         a00 = matrix[0];
         a01 = matrix[1];
@@ -1758,10 +1758,10 @@ var require_translate = __commonJS({
         out[9] = a21;
         out[10] = a22;
         out[11] = a23;
-        out[12] = a00 * x + a10 * y + a20 * z134 + matrix[12];
-        out[13] = a01 * x + a11 * y + a21 * z134 + matrix[13];
-        out[14] = a02 * x + a12 * y + a22 * z134 + matrix[14];
-        out[15] = a03 * x + a13 * y + a23 * z134 + matrix[15];
+        out[12] = a00 * x + a10 * y + a20 * z135 + matrix[12];
+        out[13] = a01 * x + a11 * y + a21 * z135 + matrix[13];
+        out[14] = a02 * x + a12 * y + a22 * z135 + matrix[14];
+        out[15] = a03 * x + a13 * y + a23 * z135 + matrix[15];
       }
       return out;
     };
@@ -2105,7 +2105,7 @@ var require_negate2 = __commonJS({
 var require_rotate2 = __commonJS({
   "node_modules/@jscad/modeling/src/maths/vec2/rotate.js"(exports, module) {
     "use strict";
-    var rotate2 = (out, vector, origin, radians) => {
+    var rotate3 = (out, vector, origin, radians) => {
       const x = vector[0] - origin[0];
       const y = vector[1] - origin[1];
       const c = Math.cos(radians);
@@ -2114,7 +2114,7 @@ var require_rotate2 = __commonJS({
       out[1] = x * s + y * c + origin[1];
       return out;
     };
-    module.exports = rotate2;
+    module.exports = rotate3;
   }
 });
 
@@ -2124,8 +2124,8 @@ var require_normal = __commonJS({
     "use strict";
     var { TAU } = require_constants();
     var create = require_create4();
-    var rotate2 = require_rotate2();
-    var normal = (out, vector) => rotate2(out, vector, create(), TAU / 4);
+    var rotate3 = require_rotate2();
+    var normal = (out, vector) => rotate3(out, vector, create(), TAU / 4);
     module.exports = normal;
   }
 });
@@ -3831,11 +3831,11 @@ var require_fromValues4 = __commonJS({
   "node_modules/@jscad/modeling/src/maths/vec4/fromValues.js"(exports, module) {
     "use strict";
     var create = require_create7();
-    var fromValues = (x, y, z134, w) => {
+    var fromValues = (x, y, z135, w) => {
       const out = create();
       out[0] = x;
       out[1] = y;
-      out[2] = z134;
+      out[2] = z135;
       out[3] = w;
       return out;
     };
@@ -3993,8 +3993,8 @@ var require_projectionOfPoint = __commonJS({
       const a = point2[0] * plane[0] + point2[1] * plane[1] + point2[2] * plane[2] - plane[3];
       const x = point2[0] - a * plane[0];
       const y = point2[1] - a * plane[1];
-      const z134 = point2[2] - a * plane[2];
-      return vec3.fromValues(x, y, z134);
+      const z135 = point2[2] - a * plane[2];
+      return vec3.fromValues(x, y, z135);
     };
     module.exports = projectionOfPoint;
   }
@@ -4298,11 +4298,11 @@ var require_transform5 = __commonJS({
   "node_modules/@jscad/modeling/src/maths/vec4/transform.js"(exports, module) {
     "use strict";
     var transform2 = (out, vector, matrix) => {
-      const [x, y, z134, w] = vector;
-      out[0] = matrix[0] * x + matrix[4] * y + matrix[8] * z134 + matrix[12] * w;
-      out[1] = matrix[1] * x + matrix[5] * y + matrix[9] * z134 + matrix[13] * w;
-      out[2] = matrix[2] * x + matrix[6] * y + matrix[10] * z134 + matrix[14] * w;
-      out[3] = matrix[3] * x + matrix[7] * y + matrix[11] * z134 + matrix[15] * w;
+      const [x, y, z135, w] = vector;
+      out[0] = matrix[0] * x + matrix[4] * y + matrix[8] * z135 + matrix[12] * w;
+      out[1] = matrix[1] * x + matrix[5] * y + matrix[9] * z135 + matrix[13] * w;
+      out[2] = matrix[2] * x + matrix[6] * y + matrix[10] * z135 + matrix[14] * w;
+      out[3] = matrix[3] * x + matrix[7] * y + matrix[11] * z135 + matrix[15] * w;
       return out;
     };
     module.exports = transform2;
@@ -4364,8 +4364,8 @@ var require_measureBoundingSphere = __commonJS({
       out[2] = (minz[2] + maxz[2]) * 0.5;
       const x = out[0] - maxx[0];
       const y = out[1] - maxy[1];
-      const z134 = out[2] - maxz[2];
-      out[3] = Math.sqrt(x * x + y * y + z134 * z134);
+      const z135 = out[2] - maxz[2];
+      out[3] = Math.sqrt(x * x + y * y + z135 * z135);
       cache.set(polygon3, out);
       return out;
     };
@@ -9707,7 +9707,7 @@ var require_rotate3 = __commonJS({
     var geom2 = require_geom2();
     var geom3 = require_geom3();
     var path2 = require_path2();
-    var rotate2 = (angles, ...objects) => {
+    var rotate3 = (angles, ...objects) => {
       if (!Array.isArray(angles)) throw new Error("angles must be an array");
       objects = flatten(objects);
       if (objects.length === 0) throw new Error("wrong number of arguments");
@@ -9725,11 +9725,11 @@ var require_rotate3 = __commonJS({
       });
       return results.length === 1 ? results[0] : results;
     };
-    var rotateX = (angle, ...objects) => rotate2([angle, 0, 0], objects);
-    var rotateY = (angle, ...objects) => rotate2([0, angle, 0], objects);
-    var rotateZ4 = (angle, ...objects) => rotate2([0, 0, angle], objects);
+    var rotateX = (angle, ...objects) => rotate3([angle, 0, 0], objects);
+    var rotateY = (angle, ...objects) => rotate3([0, angle, 0], objects);
+    var rotateZ4 = (angle, ...objects) => rotate3([0, 0, angle], objects);
     module.exports = {
-      rotate: rotate2,
+      rotate: rotate3,
       rotateX,
       rotateY,
       rotateZ: rotateZ4
@@ -9779,7 +9779,7 @@ var require_torus = __commonJS({
     "use strict";
     var { TAU } = require_constants();
     var extrudeRotate = require_extrudeRotate();
-    var { rotate: rotate2 } = require_rotate3();
+    var { rotate: rotate3 } = require_rotate3();
     var { translate: translate10 } = require_translate2();
     var circle2 = require_circle();
     var { isGT, isGTE } = require_commonChecks();
@@ -9803,7 +9803,7 @@ var require_torus = __commonJS({
       if (innerRadius >= outerRadius) throw new Error("inner circle is too large to rotate about the outer circle");
       let innerCircle = circle2({ radius: innerRadius, segments: innerSegments });
       if (innerRotation !== 0) {
-        innerCircle = rotate2([0, 0, innerRotation], innerCircle);
+        innerCircle = rotate3([0, 0, innerRotation], innerCircle);
       }
       innerCircle = translate10([outerRadius, 0], innerCircle);
       const extrudeOptions = {
@@ -14751,7 +14751,7 @@ var import_jscad_planner = __toESM(require_dist(), 1);
 var import_modeling = __toESM(require_src(), 1);
 
 // node_modules/@tscircuit/footprinter/dist/index.js
-import { z as z132 } from "zod";
+import { z as z133 } from "zod";
 
 // node_modules/@tscircuit/mm/dist/index.js
 var unitToMm = {
@@ -14833,9 +14833,9 @@ import { z as z50 } from "zod";
 import { z as z51 } from "zod";
 import { z as z52 } from "zod";
 import { z as z53 } from "zod";
-import { z as z55 } from "zod";
 import { z as z54 } from "zod";
 import { z as z56 } from "zod";
+import { z as z55 } from "zod";
 import { z as z57 } from "zod";
 import { z as z58 } from "zod";
 import { z as z59 } from "zod";
@@ -14911,6 +14911,7 @@ import { z as z128 } from "zod";
 import { z as z129 } from "zod";
 import { z as z130 } from "zod";
 import { z as z131 } from "zod";
+import { z as z132 } from "zod";
 var unitMappings = {
   Hz: {
     baseUnit: "Hz",
@@ -15556,191 +15557,205 @@ var source_manually_placed_via = z44.object({
   source_trace_id: z44.string().optional()
 }).describe("Defines a via that is manually placed in the source domain");
 expectTypesMatch(true);
-var unknown_error_finding_part = z45.object({
-  type: z45.literal("unknown_error_finding_part"),
-  unknown_error_finding_part_id: getZodPrefixedIdWithDefault(
-    "unknown_error_finding_part"
+var source_pin_must_be_connected_error = z45.object({
+  type: z45.literal("source_pin_must_be_connected_error"),
+  source_pin_must_be_connected_error_id: getZodPrefixedIdWithDefault(
+    "source_pin_must_be_connected_error"
   ),
-  error_type: z45.literal("unknown_error_finding_part").default("unknown_error_finding_part"),
+  error_type: z45.literal("source_pin_must_be_connected_error").default("source_pin_must_be_connected_error"),
   message: z45.string(),
-  source_component_id: z45.string().optional(),
+  source_component_id: z45.string(),
+  source_port_id: z45.string(),
   subcircuit_id: z45.string().optional()
+}).describe(
+  "Error emitted when a pin with mustBeConnected attribute is not connected to any trace"
+);
+expectTypesMatch(true);
+var unknown_error_finding_part = z46.object({
+  type: z46.literal("unknown_error_finding_part"),
+  unknown_error_finding_part_id: getZodPrefixedIdWithDefault(
+    "unknown_error_finding_part"
+  ),
+  error_type: z46.literal("unknown_error_finding_part").default("unknown_error_finding_part"),
+  message: z46.string(),
+  source_component_id: z46.string().optional(),
+  subcircuit_id: z46.string().optional()
 }).describe(
   "Error emitted when an unexpected error occurs while finding a part"
 );
 expectTypesMatch(true);
-var schematic_box = z46.object({
-  type: z46.literal("schematic_box"),
-  schematic_component_id: z46.string().optional(),
+var schematic_box = z47.object({
+  type: z47.literal("schematic_box"),
+  schematic_component_id: z47.string().optional(),
   width: distance,
   height: distance,
-  is_dashed: z46.boolean().default(false),
+  is_dashed: z47.boolean().default(false),
   x: distance,
   y: distance,
-  subcircuit_id: z46.string().optional()
+  subcircuit_id: z47.string().optional()
 }).describe("Draws a box on the schematic");
 expectTypesMatch(true);
-var schematic_path = z47.object({
-  type: z47.literal("schematic_path"),
-  schematic_component_id: z47.string(),
-  fill_color: z47.enum(["red", "blue"]).optional(),
-  is_filled: z47.boolean().optional(),
-  points: z47.array(point),
-  subcircuit_id: z47.string().optional()
+var schematic_path = z48.object({
+  type: z48.literal("schematic_path"),
+  schematic_component_id: z48.string(),
+  fill_color: z48.enum(["red", "blue"]).optional(),
+  is_filled: z48.boolean().optional(),
+  points: z48.array(point),
+  subcircuit_id: z48.string().optional()
 });
 expectTypesMatch(true);
-var schematic_pin_styles = z48.record(
-  z48.object({
+var schematic_pin_styles = z49.record(
+  z49.object({
     left_margin: length.optional(),
     right_margin: length.optional(),
     top_margin: length.optional(),
     bottom_margin: length.optional()
   })
 );
-var schematic_component_port_arrangement_by_size = z48.object({
-  left_size: z48.number(),
-  right_size: z48.number(),
-  top_size: z48.number().optional(),
-  bottom_size: z48.number().optional()
+var schematic_component_port_arrangement_by_size = z49.object({
+  left_size: z49.number(),
+  right_size: z49.number(),
+  top_size: z49.number().optional(),
+  bottom_size: z49.number().optional()
 });
 expectTypesMatch(true);
-var schematic_component_port_arrangement_by_sides = z48.object({
-  left_side: z48.object({
-    pins: z48.array(z48.number()),
+var schematic_component_port_arrangement_by_sides = z49.object({
+  left_side: z49.object({
+    pins: z49.array(z49.number()),
     // @ts-ignore
-    direction: z48.enum(["top-to-bottom", "bottom-to-top"]).optional()
+    direction: z49.enum(["top-to-bottom", "bottom-to-top"]).optional()
   }).optional(),
-  right_side: z48.object({
-    pins: z48.array(z48.number()),
+  right_side: z49.object({
+    pins: z49.array(z49.number()),
     // @ts-ignore
-    direction: z48.enum(["top-to-bottom", "bottom-to-top"]).optional()
+    direction: z49.enum(["top-to-bottom", "bottom-to-top"]).optional()
   }).optional(),
-  top_side: z48.object({
-    pins: z48.array(z48.number()),
+  top_side: z49.object({
+    pins: z49.array(z49.number()),
     // @ts-ignore
-    direction: z48.enum(["left-to-right", "right-to-left"]).optional()
+    direction: z49.enum(["left-to-right", "right-to-left"]).optional()
   }).optional(),
-  bottom_side: z48.object({
-    pins: z48.array(z48.number()),
+  bottom_side: z49.object({
+    pins: z49.array(z49.number()),
     // @ts-ignore
-    direction: z48.enum(["left-to-right", "right-to-left"]).optional()
+    direction: z49.enum(["left-to-right", "right-to-left"]).optional()
   }).optional()
 });
 expectTypesMatch(true);
-var port_arrangement = z48.union([
+var port_arrangement = z49.union([
   schematic_component_port_arrangement_by_size,
   schematic_component_port_arrangement_by_sides
 ]);
-var schematic_component = z48.object({
-  type: z48.literal("schematic_component"),
+var schematic_component = z49.object({
+  type: z49.literal("schematic_component"),
   size,
   center: point,
-  source_component_id: z48.string().optional(),
-  schematic_component_id: z48.string(),
+  source_component_id: z49.string().optional(),
+  schematic_component_id: z49.string(),
   pin_spacing: length.optional(),
   pin_styles: schematic_pin_styles.optional(),
   box_width: length.optional(),
-  symbol_name: z48.string().optional(),
+  symbol_name: z49.string().optional(),
   port_arrangement: port_arrangement.optional(),
-  port_labels: z48.record(z48.string()).optional(),
-  symbol_display_value: z48.string().optional(),
-  subcircuit_id: z48.string().optional(),
-  schematic_group_id: z48.string().optional(),
-  is_schematic_group: z48.boolean().optional(),
-  source_group_id: z48.string().optional(),
-  is_box_with_pins: z48.boolean().optional().default(true)
+  port_labels: z49.record(z49.string()).optional(),
+  symbol_display_value: z49.string().optional(),
+  subcircuit_id: z49.string().optional(),
+  schematic_group_id: z49.string().optional(),
+  is_schematic_group: z49.boolean().optional(),
+  source_group_id: z49.string().optional(),
+  is_box_with_pins: z49.boolean().optional().default(true)
 });
 expectTypesMatch(true);
-var schematic_line = z49.object({
-  type: z49.literal("schematic_line"),
+var schematic_line = z50.object({
+  type: z50.literal("schematic_line"),
   schematic_line_id: getZodPrefixedIdWithDefault("schematic_line"),
-  schematic_component_id: z49.string(),
+  schematic_component_id: z50.string(),
   x1: distance,
   y1: distance,
   x2: distance,
   y2: distance,
   stroke_width: distance.nullable().optional(),
-  color: z49.string().default("#000000"),
-  is_dashed: z49.boolean().default(false),
-  subcircuit_id: z49.string().optional()
+  color: z50.string().default("#000000"),
+  is_dashed: z50.boolean().default(false),
+  subcircuit_id: z50.string().optional()
 }).describe("Draws a styled line on the schematic");
 expectTypesMatch(true);
-var schematic_rect = z50.object({
-  type: z50.literal("schematic_rect"),
+var schematic_rect = z51.object({
+  type: z51.literal("schematic_rect"),
   schematic_rect_id: getZodPrefixedIdWithDefault("schematic_rect"),
-  schematic_component_id: z50.string(),
+  schematic_component_id: z51.string(),
   center: point,
   width: distance,
   height: distance,
   rotation: rotation.default(0),
   stroke_width: distance.nullable().optional(),
-  color: z50.string().default("#000000"),
-  is_filled: z50.boolean().default(false),
-  fill_color: z50.string().optional(),
-  is_dashed: z50.boolean().default(false),
-  subcircuit_id: z50.string().optional()
+  color: z51.string().default("#000000"),
+  is_filled: z51.boolean().default(false),
+  fill_color: z51.string().optional(),
+  is_dashed: z51.boolean().default(false),
+  subcircuit_id: z51.string().optional()
 }).describe("Draws a styled rectangle on the schematic");
 expectTypesMatch(true);
-var schematic_circle = z51.object({
-  type: z51.literal("schematic_circle"),
+var schematic_circle = z52.object({
+  type: z52.literal("schematic_circle"),
   schematic_circle_id: getZodPrefixedIdWithDefault("schematic_circle"),
-  schematic_component_id: z51.string(),
+  schematic_component_id: z52.string(),
   center: point,
   radius: distance,
   stroke_width: distance.nullable().optional(),
-  color: z51.string().default("#000000"),
-  is_filled: z51.boolean().default(false),
-  fill_color: z51.string().optional(),
-  is_dashed: z51.boolean().default(false),
-  subcircuit_id: z51.string().optional()
+  color: z52.string().default("#000000"),
+  is_filled: z52.boolean().default(false),
+  fill_color: z52.string().optional(),
+  is_dashed: z52.boolean().default(false),
+  subcircuit_id: z52.string().optional()
 }).describe("Draws a styled circle on the schematic");
 expectTypesMatch(true);
-var schematic_arc = z52.object({
-  type: z52.literal("schematic_arc"),
+var schematic_arc = z53.object({
+  type: z53.literal("schematic_arc"),
   schematic_arc_id: getZodPrefixedIdWithDefault("schematic_arc"),
-  schematic_component_id: z52.string(),
+  schematic_component_id: z53.string(),
   center: point,
   radius: distance,
   start_angle_degrees: rotation,
   end_angle_degrees: rotation,
-  direction: z52.enum(["clockwise", "counterclockwise"]).default("counterclockwise"),
+  direction: z53.enum(["clockwise", "counterclockwise"]).default("counterclockwise"),
   stroke_width: distance.nullable().optional(),
-  color: z52.string().default("#000000"),
-  is_dashed: z52.boolean().default(false),
-  subcircuit_id: z52.string().optional()
+  color: z53.string().default("#000000"),
+  is_dashed: z53.boolean().default(false),
+  subcircuit_id: z53.string().optional()
 }).describe("Draws a styled arc on the schematic");
 expectTypesMatch(true);
-var schematic_trace = z53.object({
-  type: z53.literal("schematic_trace"),
-  schematic_trace_id: z53.string(),
-  source_trace_id: z53.string().optional(),
-  junctions: z53.array(
-    z53.object({
-      x: z53.number(),
-      y: z53.number()
+var schematic_trace = z54.object({
+  type: z54.literal("schematic_trace"),
+  schematic_trace_id: z54.string(),
+  source_trace_id: z54.string().optional(),
+  junctions: z54.array(
+    z54.object({
+      x: z54.number(),
+      y: z54.number()
     })
   ),
-  edges: z53.array(
-    z53.object({
-      from: z53.object({
-        x: z53.number(),
-        y: z53.number()
+  edges: z54.array(
+    z54.object({
+      from: z54.object({
+        x: z54.number(),
+        y: z54.number()
       }),
-      to: z53.object({
-        x: z53.number(),
-        y: z53.number()
+      to: z54.object({
+        x: z54.number(),
+        y: z54.number()
       }),
-      is_crossing: z53.boolean().optional(),
-      from_schematic_port_id: z53.string().optional(),
-      to_schematic_port_id: z53.string().optional()
+      is_crossing: z54.boolean().optional(),
+      from_schematic_port_id: z54.string().optional(),
+      to_schematic_port_id: z54.string().optional()
     })
   ),
-  subcircuit_id: z53.string().optional(),
+  subcircuit_id: z54.string().optional(),
   // TODO: make required in a future release
-  subcircuit_connectivity_map_key: z53.string().optional()
+  subcircuit_connectivity_map_key: z54.string().optional()
 });
 expectTypesMatch(true);
-var fivePointAnchor = z54.enum([
+var fivePointAnchor = z55.enum([
   "center",
   "left",
   "right",
@@ -15748,464 +15763,476 @@ var fivePointAnchor = z54.enum([
   "bottom"
 ]);
 expectTypesMatch(true);
-var schematic_text = z55.object({
-  type: z55.literal("schematic_text"),
-  schematic_component_id: z55.string().optional(),
-  schematic_text_id: z55.string(),
-  text: z55.string(),
-  font_size: z55.number().default(0.18),
-  position: z55.object({
+var schematic_text = z56.object({
+  type: z56.literal("schematic_text"),
+  schematic_component_id: z56.string().optional(),
+  schematic_text_id: z56.string(),
+  text: z56.string(),
+  font_size: z56.number().default(0.18),
+  position: z56.object({
     x: distance,
     y: distance
   }),
-  rotation: z55.number().default(0),
-  anchor: z55.union([fivePointAnchor.describe("legacy"), ninePointAnchor]).default("center"),
-  color: z55.string().default("#000000"),
-  subcircuit_id: z55.string().optional()
+  rotation: z56.number().default(0),
+  anchor: z56.union([fivePointAnchor.describe("legacy"), ninePointAnchor]).default("center"),
+  color: z56.string().default("#000000"),
+  subcircuit_id: z56.string().optional()
 });
 expectTypesMatch(true);
-var schematic_port = z56.object({
-  type: z56.literal("schematic_port"),
-  schematic_port_id: z56.string(),
-  source_port_id: z56.string(),
-  schematic_component_id: z56.string().optional(),
+var schematic_port = z57.object({
+  type: z57.literal("schematic_port"),
+  schematic_port_id: z57.string(),
+  source_port_id: z57.string(),
+  schematic_component_id: z57.string().optional(),
   center: point,
-  facing_direction: z56.enum(["up", "down", "left", "right"]).optional(),
-  distance_from_component_edge: z56.number().optional(),
-  side_of_component: z56.enum(["top", "bottom", "left", "right"]).optional(),
-  true_ccw_index: z56.number().optional(),
-  pin_number: z56.number().optional(),
-  display_pin_label: z56.string().optional(),
-  subcircuit_id: z56.string().optional(),
-  is_connected: z56.boolean().optional(),
-  has_input_arrow: z56.boolean().optional(),
-  has_output_arrow: z56.boolean().optional()
+  facing_direction: z57.enum(["up", "down", "left", "right"]).optional(),
+  distance_from_component_edge: z57.number().optional(),
+  side_of_component: z57.enum(["top", "bottom", "left", "right"]).optional(),
+  true_ccw_index: z57.number().optional(),
+  pin_number: z57.number().optional(),
+  display_pin_label: z57.string().optional(),
+  subcircuit_id: z57.string().optional(),
+  is_connected: z57.boolean().optional(),
+  has_input_arrow: z57.boolean().optional(),
+  has_output_arrow: z57.boolean().optional()
 }).describe("Defines a port on a schematic component");
 expectTypesMatch(true);
-var schematic_net_label = z57.object({
-  type: z57.literal("schematic_net_label"),
+var schematic_net_label = z58.object({
+  type: z58.literal("schematic_net_label"),
   schematic_net_label_id: getZodPrefixedIdWithDefault("schematic_net_label"),
-  schematic_trace_id: z57.string().optional(),
-  source_trace_id: z57.string().optional(),
-  source_net_id: z57.string(),
+  schematic_trace_id: z58.string().optional(),
+  source_trace_id: z58.string().optional(),
+  source_net_id: z58.string(),
   center: point,
   anchor_position: point.optional(),
-  anchor_side: z57.enum(["top", "bottom", "left", "right"]),
-  text: z57.string(),
-  symbol_name: z57.string().optional(),
-  is_movable: z57.boolean().optional(),
-  subcircuit_id: z57.string().optional()
+  anchor_side: z58.enum(["top", "bottom", "left", "right"]),
+  text: z58.string(),
+  symbol_name: z58.string().optional(),
+  is_movable: z58.boolean().optional(),
+  subcircuit_id: z58.string().optional()
 });
 expectTypesMatch(true);
-var schematic_error = z58.object({
-  type: z58.literal("schematic_error"),
-  schematic_error_id: z58.string(),
+var schematic_error = z59.object({
+  type: z59.literal("schematic_error"),
+  schematic_error_id: z59.string(),
   // eventually each error type should be broken out into a dir of files
-  error_type: z58.literal("schematic_port_not_found").default("schematic_port_not_found"),
-  message: z58.string(),
-  subcircuit_id: z58.string().optional()
+  error_type: z59.literal("schematic_port_not_found").default("schematic_port_not_found"),
+  message: z59.string(),
+  subcircuit_id: z59.string().optional()
 }).describe("Defines a schematic error on the schematic");
 expectTypesMatch(true);
-var schematic_layout_error = z59.object({
-  type: z59.literal("schematic_layout_error"),
+var schematic_layout_error = z60.object({
+  type: z60.literal("schematic_layout_error"),
   schematic_layout_error_id: getZodPrefixedIdWithDefault(
     "schematic_layout_error"
   ),
-  error_type: z59.literal("schematic_layout_error").default("schematic_layout_error"),
-  message: z59.string(),
-  source_group_id: z59.string(),
-  schematic_group_id: z59.string(),
-  subcircuit_id: z59.string().optional()
+  error_type: z60.literal("schematic_layout_error").default("schematic_layout_error"),
+  message: z60.string(),
+  source_group_id: z60.string(),
+  schematic_group_id: z60.string(),
+  subcircuit_id: z60.string().optional()
 }).describe("Error emitted when schematic layout fails for a group");
 expectTypesMatch(true);
-var schematic_debug_object_base = z60.object({
-  type: z60.literal("schematic_debug_object"),
-  label: z60.string().optional(),
-  subcircuit_id: z60.string().optional()
+var schematic_debug_object_base = z61.object({
+  type: z61.literal("schematic_debug_object"),
+  label: z61.string().optional(),
+  subcircuit_id: z61.string().optional()
 });
 var schematic_debug_rect = schematic_debug_object_base.extend({
-  shape: z60.literal("rect"),
+  shape: z61.literal("rect"),
   center: point,
   size
 });
 var schematic_debug_line = schematic_debug_object_base.extend({
-  shape: z60.literal("line"),
+  shape: z61.literal("line"),
   start: point,
   end: point
 });
 var schematic_debug_point = schematic_debug_object_base.extend({
-  shape: z60.literal("point"),
+  shape: z61.literal("point"),
   center: point
 });
-var schematic_debug_object = z60.discriminatedUnion("shape", [
+var schematic_debug_object = z61.discriminatedUnion("shape", [
   schematic_debug_rect,
   schematic_debug_line,
   schematic_debug_point
 ]);
 expectTypesMatch(true);
-var schematic_voltage_probe = z61.object({
-  type: z61.literal("schematic_voltage_probe"),
-  schematic_voltage_probe_id: z61.string(),
-  source_component_id: z61.string().optional(),
-  name: z61.string().optional(),
+var schematic_voltage_probe = z62.object({
+  type: z62.literal("schematic_voltage_probe"),
+  schematic_voltage_probe_id: z62.string(),
+  source_component_id: z62.string().optional(),
+  name: z62.string().optional(),
   position: point,
-  schematic_trace_id: z61.string(),
+  schematic_trace_id: z62.string(),
   voltage: voltage.optional(),
-  subcircuit_id: z61.string().optional(),
-  color: z61.string().optional()
+  subcircuit_id: z62.string().optional(),
+  color: z62.string().optional()
 }).describe("Defines a voltage probe measurement point on a schematic trace");
 expectTypesMatch(true);
-var schematic_manual_edit_conflict_warning = z62.object({
-  type: z62.literal("schematic_manual_edit_conflict_warning"),
+var schematic_manual_edit_conflict_warning = z63.object({
+  type: z63.literal("schematic_manual_edit_conflict_warning"),
   schematic_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "schematic_manual_edit_conflict_warning"
   ),
-  warning_type: z62.literal("schematic_manual_edit_conflict_warning").default("schematic_manual_edit_conflict_warning"),
-  message: z62.string(),
-  schematic_component_id: z62.string(),
-  schematic_group_id: z62.string().optional(),
-  subcircuit_id: z62.string().optional(),
-  source_component_id: z62.string()
+  warning_type: z63.literal("schematic_manual_edit_conflict_warning").default("schematic_manual_edit_conflict_warning"),
+  message: z63.string(),
+  schematic_component_id: z63.string(),
+  schematic_group_id: z63.string().optional(),
+  subcircuit_id: z63.string().optional(),
+  source_component_id: z63.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit schX/schY coordinates"
 );
 expectTypesMatch(true);
-var schematic_group = z63.object({
-  type: z63.literal("schematic_group"),
+var schematic_group = z64.object({
+  type: z64.literal("schematic_group"),
   schematic_group_id: getZodPrefixedIdWithDefault("schematic_group"),
-  source_group_id: z63.string(),
-  is_subcircuit: z63.boolean().optional(),
-  subcircuit_id: z63.string().optional(),
+  source_group_id: z64.string(),
+  is_subcircuit: z64.boolean().optional(),
+  subcircuit_id: z64.string().optional(),
   width: length,
   height: length,
   center: point,
-  schematic_component_ids: z63.array(z63.string()),
-  show_as_schematic_box: z63.boolean().optional(),
-  name: z63.string().optional(),
-  description: z63.string().optional()
+  schematic_component_ids: z64.array(z64.string()),
+  show_as_schematic_box: z64.boolean().optional(),
+  name: z64.string().optional(),
+  description: z64.string().optional()
 }).describe("Defines a group of components on the schematic");
 expectTypesMatch(true);
-var schematic_table = z64.object({
-  type: z64.literal("schematic_table"),
+var schematic_table = z65.object({
+  type: z65.literal("schematic_table"),
   schematic_table_id: getZodPrefixedIdWithDefault("schematic_table"),
   anchor_position: point,
-  column_widths: z64.array(distance),
-  row_heights: z64.array(distance),
+  column_widths: z65.array(distance),
+  row_heights: z65.array(distance),
   cell_padding: distance.optional(),
   border_width: distance.optional(),
-  subcircuit_id: z64.string().optional(),
-  schematic_component_id: z64.string().optional(),
+  subcircuit_id: z65.string().optional(),
+  schematic_component_id: z65.string().optional(),
   anchor: ninePointAnchor.optional()
 }).describe("Defines a table on the schematic");
 expectTypesMatch(true);
-var schematic_table_cell = z65.object({
-  type: z65.literal("schematic_table_cell"),
+var schematic_table_cell = z66.object({
+  type: z66.literal("schematic_table_cell"),
   schematic_table_cell_id: getZodPrefixedIdWithDefault(
     "schematic_table_cell"
   ),
-  schematic_table_id: z65.string(),
-  start_row_index: z65.number(),
-  end_row_index: z65.number(),
-  start_column_index: z65.number(),
-  end_column_index: z65.number(),
-  text: z65.string().optional(),
+  schematic_table_id: z66.string(),
+  start_row_index: z66.number(),
+  end_row_index: z66.number(),
+  start_column_index: z66.number(),
+  end_column_index: z66.number(),
+  text: z66.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  horizontal_align: z65.enum(["left", "center", "right"]).optional(),
-  vertical_align: z65.enum(["top", "middle", "bottom"]).optional(),
+  horizontal_align: z66.enum(["left", "center", "right"]).optional(),
+  vertical_align: z66.enum(["top", "middle", "bottom"]).optional(),
   font_size: distance.optional(),
-  subcircuit_id: z65.string().optional()
+  subcircuit_id: z66.string().optional()
 }).describe("Defines a cell within a schematic_table");
 expectTypesMatch(true);
-var schematic_sheet = z66.object({
-  type: z66.literal("schematic_sheet"),
+var schematic_sheet = z67.object({
+  type: z67.literal("schematic_sheet"),
   schematic_sheet_id: getZodPrefixedIdWithDefault("schematic_sheet"),
-  name: z66.string().optional(),
-  subcircuit_id: z66.string().optional()
+  name: z67.string().optional(),
+  subcircuit_id: z67.string().optional()
 }).describe(
   "Defines a schematic sheet or page that components can be placed on"
 );
 expectTypesMatch(true);
-var point_with_bulge = z67.object({
+var point_with_bulge = z68.object({
   x: distance,
   y: distance,
-  bulge: z67.number().optional()
+  bulge: z68.number().optional()
 });
 expectTypesMatch(true);
-var ring = z67.object({
-  vertices: z67.array(point_with_bulge)
+var ring = z68.object({
+  vertices: z68.array(point_with_bulge)
 });
 expectTypesMatch(true);
-var brep_shape = z67.object({
+var brep_shape = z68.object({
   outer_ring: ring,
-  inner_rings: z67.array(ring).default([])
+  inner_rings: z68.array(ring).default([])
 });
 expectTypesMatch(true);
-var pcb_route_hint = z68.object({
+var pcb_route_hint = z69.object({
   x: distance,
   y: distance,
-  via: z68.boolean().optional(),
+  via: z69.boolean().optional(),
   via_to_layer: layer_ref.optional()
 });
-var pcb_route_hints = z68.array(pcb_route_hint);
+var pcb_route_hints = z69.array(pcb_route_hint);
 expectTypesMatch(true);
 expectTypesMatch(true);
-var route_hint_point = z69.object({
+var route_hint_point = z70.object({
   x: distance,
   y: distance,
-  via: z69.boolean().optional(),
+  via: z70.boolean().optional(),
   to_layer: layer_ref.optional(),
   trace_width: distance.optional()
 });
 expectTypesMatch(true);
-var pcb_component = z70.object({
-  type: z70.literal("pcb_component"),
+var pcb_component = z71.object({
+  type: z71.literal("pcb_component"),
   pcb_component_id: getZodPrefixedIdWithDefault("pcb_component"),
-  source_component_id: z70.string(),
+  source_component_id: z71.string(),
   center: point,
   layer: layer_ref,
   rotation,
   width: length,
   height: length,
-  do_not_place: z70.boolean().optional(),
-  subcircuit_id: z70.string().optional(),
-  pcb_group_id: z70.string().optional(),
-  position_mode: z70.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
-  positioned_relative_to_pcb_group_id: z70.string().optional(),
-  obstructs_within_bounds: z70.boolean().default(true).describe(
+  do_not_place: z71.boolean().optional(),
+  subcircuit_id: z71.string().optional(),
+  pcb_group_id: z71.string().optional(),
+  position_mode: z71.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
+  positioned_relative_to_pcb_group_id: z71.string().optional(),
+  obstructs_within_bounds: z71.boolean().default(true).describe(
     "Does this component take up all the space within its bounds on a layer. This is generally true except for when separated pin headers are being represented by a single component (in which case, chips can be placed between the pin headers) or for tall modules where chips fit underneath"
   )
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
-var pcb_hole_circle = z71.object({
-  type: z71.literal("pcb_hole"),
+var pcb_hole_circle = z72.object({
+  type: z72.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
-  hole_shape: z71.literal("circle"),
-  hole_diameter: z71.number(),
+  pcb_group_id: z72.string().optional(),
+  subcircuit_id: z72.string().optional(),
+  hole_shape: z72.literal("circle"),
+  hole_diameter: z72.number(),
   x: distance,
   y: distance,
-  soldermask_margin: z71.number().optional()
+  is_covered_with_solder_mask: z72.boolean().optional(),
+  soldermask_margin: z72.number().optional()
 });
 var pcb_hole_circle_shape = pcb_hole_circle.describe(
   "Defines a circular hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_rect = z71.object({
-  type: z71.literal("pcb_hole"),
+var pcb_hole_rect = z72.object({
+  type: z72.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
-  hole_shape: z71.literal("rect"),
-  hole_width: z71.number(),
-  hole_height: z71.number(),
+  pcb_group_id: z72.string().optional(),
+  subcircuit_id: z72.string().optional(),
+  hole_shape: z72.literal("rect"),
+  hole_width: z72.number(),
+  hole_height: z72.number(),
   x: distance,
   y: distance,
-  soldermask_margin: z71.number().optional()
+  is_covered_with_solder_mask: z72.boolean().optional(),
+  soldermask_margin: z72.number().optional()
 });
 var pcb_hole_rect_shape = pcb_hole_rect.describe(
   "Defines a rectangular (square-capable) hole on the PCB. Use equal width/height for square."
 );
 expectTypesMatch(true);
-var pcb_hole_circle_or_square = z71.object({
-  type: z71.literal("pcb_hole"),
+var pcb_hole_circle_or_square = z72.object({
+  type: z72.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
-  hole_shape: z71.enum(["circle", "square"]),
-  hole_diameter: z71.number(),
+  pcb_group_id: z72.string().optional(),
+  subcircuit_id: z72.string().optional(),
+  hole_shape: z72.enum(["circle", "square"]),
+  hole_diameter: z72.number(),
   x: distance,
   y: distance,
-  soldermask_margin: z71.number().optional()
+  is_covered_with_solder_mask: z72.boolean().optional(),
+  soldermask_margin: z72.number().optional()
 });
 var pcb_hole_circle_or_square_shape = pcb_hole_circle_or_square.describe(
   "Defines a circular or square hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_oval = z71.object({
-  type: z71.literal("pcb_hole"),
+var pcb_hole_oval = z72.object({
+  type: z72.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
-  hole_shape: z71.literal("oval"),
-  hole_width: z71.number(),
-  hole_height: z71.number(),
+  pcb_group_id: z72.string().optional(),
+  subcircuit_id: z72.string().optional(),
+  hole_shape: z72.literal("oval"),
+  hole_width: z72.number(),
+  hole_height: z72.number(),
   x: distance,
   y: distance,
-  soldermask_margin: z71.number().optional()
+  is_covered_with_solder_mask: z72.boolean().optional(),
+  soldermask_margin: z72.number().optional()
 });
 var pcb_hole_oval_shape = pcb_hole_oval.describe(
   "Defines an oval hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_pill = z71.object({
-  type: z71.literal("pcb_hole"),
+var pcb_hole_pill = z72.object({
+  type: z72.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
-  hole_shape: z71.literal("pill"),
-  hole_width: z71.number(),
-  hole_height: z71.number(),
+  pcb_group_id: z72.string().optional(),
+  subcircuit_id: z72.string().optional(),
+  hole_shape: z72.literal("pill"),
+  hole_width: z72.number(),
+  hole_height: z72.number(),
   x: distance,
   y: distance,
-  soldermask_margin: z71.number().optional()
+  is_covered_with_solder_mask: z72.boolean().optional(),
+  soldermask_margin: z72.number().optional()
 });
 var pcb_hole_pill_shape = pcb_hole_pill.describe(
   "Defines a pill-shaped hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_rotated_pill = z71.object({
-  type: z71.literal("pcb_hole"),
+var pcb_hole_rotated_pill = z72.object({
+  type: z72.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
-  hole_shape: z71.literal("rotated_pill"),
-  hole_width: z71.number(),
-  hole_height: z71.number(),
+  pcb_group_id: z72.string().optional(),
+  subcircuit_id: z72.string().optional(),
+  hole_shape: z72.literal("rotated_pill"),
+  hole_width: z72.number(),
+  hole_height: z72.number(),
   x: distance,
   y: distance,
   ccw_rotation: rotation,
-  soldermask_margin: z71.number().optional()
+  is_covered_with_solder_mask: z72.boolean().optional(),
+  soldermask_margin: z72.number().optional()
 });
 var pcb_hole_rotated_pill_shape = pcb_hole_rotated_pill.describe(
   "Defines a rotated pill-shaped hole on the PCB"
 );
 expectTypesMatch(true);
 var pcb_hole = pcb_hole_circle_or_square.or(pcb_hole_oval).or(pcb_hole_pill).or(pcb_hole_rotated_pill).or(pcb_hole_circle).or(pcb_hole_rect);
-var pcb_plated_hole_circle = z72.object({
-  type: z72.literal("pcb_plated_hole"),
-  shape: z72.literal("circle"),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
-  outer_diameter: z72.number(),
-  hole_diameter: z72.number(),
+var pcb_plated_hole_circle = z73.object({
+  type: z73.literal("pcb_plated_hole"),
+  shape: z73.literal("circle"),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
+  outer_diameter: z73.number(),
+  hole_diameter: z73.number(),
   x: distance,
   y: distance,
-  layers: z72.array(layer_ref),
-  port_hints: z72.array(z72.string()).optional(),
-  pcb_component_id: z72.string().optional(),
-  pcb_port_id: z72.string().optional(),
+  layers: z73.array(layer_ref),
+  port_hints: z73.array(z73.string()).optional(),
+  pcb_component_id: z73.string().optional(),
+  pcb_port_id: z73.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z72.number().optional()
+  soldermask_margin: z73.number().optional(),
+  is_covered_with_solder_mask: z73.boolean().optional()
 });
-var pcb_plated_hole_oval = z72.object({
-  type: z72.literal("pcb_plated_hole"),
-  shape: z72.enum(["oval", "pill"]),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
-  outer_width: z72.number(),
-  outer_height: z72.number(),
-  hole_width: z72.number(),
-  hole_height: z72.number(),
+var pcb_plated_hole_oval = z73.object({
+  type: z73.literal("pcb_plated_hole"),
+  shape: z73.enum(["oval", "pill"]),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
+  outer_width: z73.number(),
+  outer_height: z73.number(),
+  hole_width: z73.number(),
+  hole_height: z73.number(),
+  is_covered_with_solder_mask: z73.boolean().optional(),
   x: distance,
   y: distance,
   ccw_rotation: rotation,
-  layers: z72.array(layer_ref),
-  port_hints: z72.array(z72.string()).optional(),
-  pcb_component_id: z72.string().optional(),
-  pcb_port_id: z72.string().optional(),
+  layers: z73.array(layer_ref),
+  port_hints: z73.array(z73.string()).optional(),
+  pcb_component_id: z73.string().optional(),
+  pcb_port_id: z73.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z72.number().optional()
+  soldermask_margin: z73.number().optional()
 });
-var pcb_circular_hole_with_rect_pad = z72.object({
-  type: z72.literal("pcb_plated_hole"),
-  shape: z72.literal("circular_hole_with_rect_pad"),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
-  hole_shape: z72.literal("circle"),
-  pad_shape: z72.literal("rect"),
-  hole_diameter: z72.number(),
-  rect_pad_width: z72.number(),
-  rect_pad_height: z72.number(),
-  rect_border_radius: z72.number().optional(),
+var pcb_circular_hole_with_rect_pad = z73.object({
+  type: z73.literal("pcb_plated_hole"),
+  shape: z73.literal("circular_hole_with_rect_pad"),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
+  hole_shape: z73.literal("circle"),
+  pad_shape: z73.literal("rect"),
+  hole_diameter: z73.number(),
+  rect_pad_width: z73.number(),
+  rect_pad_height: z73.number(),
+  rect_border_radius: z73.number().optional(),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
+  is_covered_with_solder_mask: z73.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z72.array(layer_ref),
-  port_hints: z72.array(z72.string()).optional(),
-  pcb_component_id: z72.string().optional(),
-  pcb_port_id: z72.string().optional(),
+  layers: z73.array(layer_ref),
+  port_hints: z73.array(z73.string()).optional(),
+  pcb_component_id: z73.string().optional(),
+  pcb_port_id: z73.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z72.number().optional()
+  soldermask_margin: z73.number().optional()
 });
-var pcb_pill_hole_with_rect_pad = z72.object({
-  type: z72.literal("pcb_plated_hole"),
-  shape: z72.literal("pill_hole_with_rect_pad"),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
-  hole_shape: z72.literal("pill"),
-  pad_shape: z72.literal("rect"),
-  hole_width: z72.number(),
-  hole_height: z72.number(),
-  rect_pad_width: z72.number(),
-  rect_pad_height: z72.number(),
-  rect_border_radius: z72.number().optional(),
+var pcb_pill_hole_with_rect_pad = z73.object({
+  type: z73.literal("pcb_plated_hole"),
+  shape: z73.literal("pill_hole_with_rect_pad"),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
+  hole_shape: z73.literal("pill"),
+  pad_shape: z73.literal("rect"),
+  hole_width: z73.number(),
+  hole_height: z73.number(),
+  rect_pad_width: z73.number(),
+  rect_pad_height: z73.number(),
+  rect_border_radius: z73.number().optional(),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
+  is_covered_with_solder_mask: z73.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z72.array(layer_ref),
-  port_hints: z72.array(z72.string()).optional(),
-  pcb_component_id: z72.string().optional(),
-  pcb_port_id: z72.string().optional(),
+  layers: z73.array(layer_ref),
+  port_hints: z73.array(z73.string()).optional(),
+  pcb_component_id: z73.string().optional(),
+  pcb_port_id: z73.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z72.number().optional()
+  soldermask_margin: z73.number().optional()
 });
-var pcb_rotated_pill_hole_with_rect_pad = z72.object({
-  type: z72.literal("pcb_plated_hole"),
-  shape: z72.literal("rotated_pill_hole_with_rect_pad"),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
-  hole_shape: z72.literal("rotated_pill"),
-  pad_shape: z72.literal("rect"),
-  hole_width: z72.number(),
-  hole_height: z72.number(),
+var pcb_rotated_pill_hole_with_rect_pad = z73.object({
+  type: z73.literal("pcb_plated_hole"),
+  shape: z73.literal("rotated_pill_hole_with_rect_pad"),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
+  hole_shape: z73.literal("rotated_pill"),
+  pad_shape: z73.literal("rect"),
+  hole_width: z73.number(),
+  hole_height: z73.number(),
   hole_ccw_rotation: rotation,
-  rect_pad_width: z72.number(),
-  rect_pad_height: z72.number(),
-  rect_border_radius: z72.number().optional(),
+  rect_pad_width: z73.number(),
+  rect_pad_height: z73.number(),
+  rect_border_radius: z73.number().optional(),
   rect_ccw_rotation: rotation,
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
+  is_covered_with_solder_mask: z73.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z72.array(layer_ref),
-  port_hints: z72.array(z72.string()).optional(),
-  pcb_component_id: z72.string().optional(),
-  pcb_port_id: z72.string().optional(),
+  layers: z73.array(layer_ref),
+  port_hints: z73.array(z73.string()).optional(),
+  pcb_component_id: z73.string().optional(),
+  pcb_port_id: z73.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z72.number().optional()
+  soldermask_margin: z73.number().optional()
 });
-var pcb_hole_with_polygon_pad = z72.object({
-  type: z72.literal("pcb_plated_hole"),
-  shape: z72.literal("hole_with_polygon_pad"),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
-  hole_shape: z72.enum(["circle", "oval", "pill", "rotated_pill"]),
-  hole_diameter: z72.number().optional(),
-  hole_width: z72.number().optional(),
-  hole_height: z72.number().optional(),
-  pad_outline: z72.array(
-    z72.object({
+var pcb_hole_with_polygon_pad = z73.object({
+  type: z73.literal("pcb_plated_hole"),
+  shape: z73.literal("hole_with_polygon_pad"),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
+  hole_shape: z73.enum(["circle", "oval", "pill", "rotated_pill"]),
+  hole_diameter: z73.number().optional(),
+  hole_width: z73.number().optional(),
+  hole_height: z73.number().optional(),
+  pad_outline: z73.array(
+    z73.object({
       x: distance,
       y: distance
     })
   ).min(3),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
+  is_covered_with_solder_mask: z73.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z72.array(layer_ref),
-  port_hints: z72.array(z72.string()).optional(),
-  pcb_component_id: z72.string().optional(),
-  pcb_port_id: z72.string().optional(),
+  layers: z73.array(layer_ref),
+  port_hints: z73.array(z73.string()).optional(),
+  pcb_component_id: z73.string().optional(),
+  pcb_port_id: z73.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z72.number().optional()
+  soldermask_margin: z73.number().optional()
 });
-var pcb_plated_hole = z72.union([
+var pcb_plated_hole = z73.union([
   pcb_plated_hole_circle,
   pcb_plated_hole_oval,
   pcb_circular_hole_with_rect_pad,
@@ -16221,126 +16248,126 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
-var pcb_port = z73.object({
-  type: z73.literal("pcb_port"),
+var pcb_port = z74.object({
+  type: z74.literal("pcb_port"),
   pcb_port_id: getZodPrefixedIdWithDefault("pcb_port"),
-  pcb_group_id: z73.string().optional(),
-  subcircuit_id: z73.string().optional(),
-  source_port_id: z73.string(),
-  pcb_component_id: z73.string().optional(),
+  pcb_group_id: z74.string().optional(),
+  subcircuit_id: z74.string().optional(),
+  source_port_id: z74.string(),
+  pcb_component_id: z74.string().optional(),
   x: distance,
   y: distance,
-  layers: z73.array(layer_ref),
-  is_board_pinout: z73.boolean().optional()
+  layers: z74.array(layer_ref),
+  is_board_pinout: z74.boolean().optional()
 }).describe("Defines a port on the PCB");
 expectTypesMatch(true);
-var pcb_smtpad_circle = z74.object({
-  type: z74.literal("pcb_smtpad"),
-  shape: z74.literal("circle"),
+var pcb_smtpad_circle = z75.object({
+  type: z75.literal("pcb_smtpad"),
+  shape: z75.literal("circle"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z74.string().optional(),
-  subcircuit_id: z74.string().optional(),
+  pcb_group_id: z75.string().optional(),
+  subcircuit_id: z75.string().optional(),
   x: distance,
   y: distance,
-  radius: z74.number(),
+  radius: z75.number(),
   layer: layer_ref,
-  port_hints: z74.array(z74.string()).optional(),
-  pcb_component_id: z74.string().optional(),
-  pcb_port_id: z74.string().optional(),
-  is_covered_with_solder_mask: z74.boolean().optional(),
-  soldermask_margin: z74.number().optional()
+  port_hints: z75.array(z75.string()).optional(),
+  pcb_component_id: z75.string().optional(),
+  pcb_port_id: z75.string().optional(),
+  is_covered_with_solder_mask: z75.boolean().optional(),
+  soldermask_margin: z75.number().optional()
 });
-var pcb_smtpad_rect = z74.object({
-  type: z74.literal("pcb_smtpad"),
-  shape: z74.literal("rect"),
+var pcb_smtpad_rect = z75.object({
+  type: z75.literal("pcb_smtpad"),
+  shape: z75.literal("rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z74.string().optional(),
-  subcircuit_id: z74.string().optional(),
+  pcb_group_id: z75.string().optional(),
+  subcircuit_id: z75.string().optional(),
   x: distance,
   y: distance,
-  width: z74.number(),
-  height: z74.number(),
-  rect_border_radius: z74.number().optional(),
-  corner_radius: z74.number().optional(),
+  width: z75.number(),
+  height: z75.number(),
+  rect_border_radius: z75.number().optional(),
+  corner_radius: z75.number().optional(),
   layer: layer_ref,
-  port_hints: z74.array(z74.string()).optional(),
-  pcb_component_id: z74.string().optional(),
-  pcb_port_id: z74.string().optional(),
-  is_covered_with_solder_mask: z74.boolean().optional(),
-  soldermask_margin: z74.number().optional()
+  port_hints: z75.array(z75.string()).optional(),
+  pcb_component_id: z75.string().optional(),
+  pcb_port_id: z75.string().optional(),
+  is_covered_with_solder_mask: z75.boolean().optional(),
+  soldermask_margin: z75.number().optional()
 });
-var pcb_smtpad_rotated_rect = z74.object({
-  type: z74.literal("pcb_smtpad"),
-  shape: z74.literal("rotated_rect"),
+var pcb_smtpad_rotated_rect = z75.object({
+  type: z75.literal("pcb_smtpad"),
+  shape: z75.literal("rotated_rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z74.string().optional(),
-  subcircuit_id: z74.string().optional(),
+  pcb_group_id: z75.string().optional(),
+  subcircuit_id: z75.string().optional(),
   x: distance,
   y: distance,
-  width: z74.number(),
-  height: z74.number(),
-  rect_border_radius: z74.number().optional(),
-  corner_radius: z74.number().optional(),
+  width: z75.number(),
+  height: z75.number(),
+  rect_border_radius: z75.number().optional(),
+  corner_radius: z75.number().optional(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z74.array(z74.string()).optional(),
-  pcb_component_id: z74.string().optional(),
-  pcb_port_id: z74.string().optional(),
-  is_covered_with_solder_mask: z74.boolean().optional(),
-  soldermask_margin: z74.number().optional()
+  port_hints: z75.array(z75.string()).optional(),
+  pcb_component_id: z75.string().optional(),
+  pcb_port_id: z75.string().optional(),
+  is_covered_with_solder_mask: z75.boolean().optional(),
+  soldermask_margin: z75.number().optional()
 });
-var pcb_smtpad_pill = z74.object({
-  type: z74.literal("pcb_smtpad"),
-  shape: z74.literal("pill"),
+var pcb_smtpad_pill = z75.object({
+  type: z75.literal("pcb_smtpad"),
+  shape: z75.literal("pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z74.string().optional(),
-  subcircuit_id: z74.string().optional(),
+  pcb_group_id: z75.string().optional(),
+  subcircuit_id: z75.string().optional(),
   x: distance,
   y: distance,
-  width: z74.number(),
-  height: z74.number(),
-  radius: z74.number(),
+  width: z75.number(),
+  height: z75.number(),
+  radius: z75.number(),
   layer: layer_ref,
-  port_hints: z74.array(z74.string()).optional(),
-  pcb_component_id: z74.string().optional(),
-  pcb_port_id: z74.string().optional(),
-  is_covered_with_solder_mask: z74.boolean().optional(),
-  soldermask_margin: z74.number().optional()
+  port_hints: z75.array(z75.string()).optional(),
+  pcb_component_id: z75.string().optional(),
+  pcb_port_id: z75.string().optional(),
+  is_covered_with_solder_mask: z75.boolean().optional(),
+  soldermask_margin: z75.number().optional()
 });
-var pcb_smtpad_rotated_pill = z74.object({
-  type: z74.literal("pcb_smtpad"),
-  shape: z74.literal("rotated_pill"),
+var pcb_smtpad_rotated_pill = z75.object({
+  type: z75.literal("pcb_smtpad"),
+  shape: z75.literal("rotated_pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z74.string().optional(),
-  subcircuit_id: z74.string().optional(),
+  pcb_group_id: z75.string().optional(),
+  subcircuit_id: z75.string().optional(),
   x: distance,
   y: distance,
-  width: z74.number(),
-  height: z74.number(),
-  radius: z74.number(),
+  width: z75.number(),
+  height: z75.number(),
+  radius: z75.number(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z74.array(z74.string()).optional(),
-  pcb_component_id: z74.string().optional(),
-  pcb_port_id: z74.string().optional(),
-  is_covered_with_solder_mask: z74.boolean().optional(),
-  soldermask_margin: z74.number().optional()
+  port_hints: z75.array(z75.string()).optional(),
+  pcb_component_id: z75.string().optional(),
+  pcb_port_id: z75.string().optional(),
+  is_covered_with_solder_mask: z75.boolean().optional(),
+  soldermask_margin: z75.number().optional()
 });
-var pcb_smtpad_polygon = z74.object({
-  type: z74.literal("pcb_smtpad"),
-  shape: z74.literal("polygon"),
+var pcb_smtpad_polygon = z75.object({
+  type: z75.literal("pcb_smtpad"),
+  shape: z75.literal("polygon"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z74.string().optional(),
-  subcircuit_id: z74.string().optional(),
-  points: z74.array(point),
+  pcb_group_id: z75.string().optional(),
+  subcircuit_id: z75.string().optional(),
+  points: z75.array(point),
   layer: layer_ref,
-  port_hints: z74.array(z74.string()).optional(),
-  pcb_component_id: z74.string().optional(),
-  pcb_port_id: z74.string().optional(),
-  is_covered_with_solder_mask: z74.boolean().optional(),
-  soldermask_margin: z74.number().optional()
+  port_hints: z75.array(z75.string()).optional(),
+  pcb_component_id: z75.string().optional(),
+  pcb_port_id: z75.string().optional(),
+  is_covered_with_solder_mask: z75.boolean().optional(),
+  soldermask_margin: z75.number().optional()
 });
-var pcb_smtpad = z74.discriminatedUnion("shape", [
+var pcb_smtpad = z75.discriminatedUnion("shape", [
   pcb_smtpad_circle,
   pcb_smtpad_rect,
   pcb_smtpad_rotated_rect,
@@ -16354,78 +16381,78 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
-var pcb_solder_paste_circle = z75.object({
-  type: z75.literal("pcb_solder_paste"),
-  shape: z75.literal("circle"),
+var pcb_solder_paste_circle = z76.object({
+  type: z76.literal("pcb_solder_paste"),
+  shape: z76.literal("circle"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z75.string().optional(),
-  subcircuit_id: z75.string().optional(),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
   x: distance,
   y: distance,
-  radius: z75.number(),
+  radius: z76.number(),
   layer: layer_ref,
-  pcb_component_id: z75.string().optional(),
-  pcb_smtpad_id: z75.string().optional()
+  pcb_component_id: z76.string().optional(),
+  pcb_smtpad_id: z76.string().optional()
 });
-var pcb_solder_paste_rect = z75.object({
-  type: z75.literal("pcb_solder_paste"),
-  shape: z75.literal("rect"),
+var pcb_solder_paste_rect = z76.object({
+  type: z76.literal("pcb_solder_paste"),
+  shape: z76.literal("rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z75.string().optional(),
-  subcircuit_id: z75.string().optional(),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
   x: distance,
   y: distance,
-  width: z75.number(),
-  height: z75.number(),
+  width: z76.number(),
+  height: z76.number(),
   layer: layer_ref,
-  pcb_component_id: z75.string().optional(),
-  pcb_smtpad_id: z75.string().optional()
+  pcb_component_id: z76.string().optional(),
+  pcb_smtpad_id: z76.string().optional()
 });
-var pcb_solder_paste_pill = z75.object({
-  type: z75.literal("pcb_solder_paste"),
-  shape: z75.literal("pill"),
+var pcb_solder_paste_pill = z76.object({
+  type: z76.literal("pcb_solder_paste"),
+  shape: z76.literal("pill"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z75.string().optional(),
-  subcircuit_id: z75.string().optional(),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
   x: distance,
   y: distance,
-  width: z75.number(),
-  height: z75.number(),
-  radius: z75.number(),
+  width: z76.number(),
+  height: z76.number(),
+  radius: z76.number(),
   layer: layer_ref,
-  pcb_component_id: z75.string().optional(),
-  pcb_smtpad_id: z75.string().optional()
+  pcb_component_id: z76.string().optional(),
+  pcb_smtpad_id: z76.string().optional()
 });
-var pcb_solder_paste_rotated_rect = z75.object({
-  type: z75.literal("pcb_solder_paste"),
-  shape: z75.literal("rotated_rect"),
+var pcb_solder_paste_rotated_rect = z76.object({
+  type: z76.literal("pcb_solder_paste"),
+  shape: z76.literal("rotated_rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z75.string().optional(),
-  subcircuit_id: z75.string().optional(),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
   x: distance,
   y: distance,
-  width: z75.number(),
-  height: z75.number(),
+  width: z76.number(),
+  height: z76.number(),
   ccw_rotation: distance,
   layer: layer_ref,
-  pcb_component_id: z75.string().optional(),
-  pcb_smtpad_id: z75.string().optional()
+  pcb_component_id: z76.string().optional(),
+  pcb_smtpad_id: z76.string().optional()
 });
-var pcb_solder_paste_oval = z75.object({
-  type: z75.literal("pcb_solder_paste"),
-  shape: z75.literal("oval"),
+var pcb_solder_paste_oval = z76.object({
+  type: z76.literal("pcb_solder_paste"),
+  shape: z76.literal("oval"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z75.string().optional(),
-  subcircuit_id: z75.string().optional(),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
   x: distance,
   y: distance,
-  width: z75.number(),
-  height: z75.number(),
+  width: z76.number(),
+  height: z76.number(),
   layer: layer_ref,
-  pcb_component_id: z75.string().optional(),
-  pcb_smtpad_id: z75.string().optional()
+  pcb_component_id: z76.string().optional(),
+  pcb_smtpad_id: z76.string().optional()
 });
-var pcb_solder_paste = z75.union([
+var pcb_solder_paste = z76.union([
   pcb_solder_paste_circle,
   pcb_solder_paste_rect,
   pcb_solder_paste_pill,
@@ -16439,124 +16466,124 @@ expectTypesMatch(
   true
 );
 expectTypesMatch(true);
-var pcb_text = z76.object({
-  type: z76.literal("pcb_text"),
+var pcb_text = z77.object({
+  type: z77.literal("pcb_text"),
   pcb_text_id: getZodPrefixedIdWithDefault("pcb_text"),
-  pcb_group_id: z76.string().optional(),
-  subcircuit_id: z76.string().optional(),
-  text: z76.string(),
+  pcb_group_id: z77.string().optional(),
+  subcircuit_id: z77.string().optional(),
+  text: z77.string(),
   center: point,
   layer: layer_ref,
   width: length,
   height: length,
-  lines: z76.number(),
+  lines: z77.number(),
   // @ts-ignore
-  align: z76.enum(["bottom-left"])
+  align: z77.enum(["bottom-left"])
 }).describe("Defines text on the PCB");
 expectTypesMatch(true);
-var pcb_trace_route_point_wire = z77.object({
-  route_type: z77.literal("wire"),
+var pcb_trace_route_point_wire = z78.object({
+  route_type: z78.literal("wire"),
   x: distance,
   y: distance,
   width: distance,
-  start_pcb_port_id: z77.string().optional(),
-  end_pcb_port_id: z77.string().optional(),
+  start_pcb_port_id: z78.string().optional(),
+  end_pcb_port_id: z78.string().optional(),
   layer: layer_ref
 });
-var pcb_trace_route_point_via = z77.object({
-  route_type: z77.literal("via"),
+var pcb_trace_route_point_via = z78.object({
+  route_type: z78.literal("via"),
   x: distance,
   y: distance,
   hole_diameter: distance.optional(),
   outer_diameter: distance.optional(),
-  from_layer: z77.string(),
-  to_layer: z77.string()
+  from_layer: z78.string(),
+  to_layer: z78.string()
 });
-var pcb_trace_route_point = z77.union([
+var pcb_trace_route_point = z78.union([
   pcb_trace_route_point_wire,
   pcb_trace_route_point_via
 ]);
-var pcb_trace = z77.object({
-  type: z77.literal("pcb_trace"),
-  source_trace_id: z77.string().optional(),
-  pcb_component_id: z77.string().optional(),
+var pcb_trace = z78.object({
+  type: z78.literal("pcb_trace"),
+  source_trace_id: z78.string().optional(),
+  pcb_component_id: z78.string().optional(),
   pcb_trace_id: getZodPrefixedIdWithDefault("pcb_trace"),
-  pcb_group_id: z77.string().optional(),
-  subcircuit_id: z77.string().optional(),
-  route_thickness_mode: z77.enum(["constant", "interpolated"]).default("constant").optional(),
-  route_order_index: z77.number().optional(),
-  should_round_corners: z77.boolean().optional(),
-  trace_length: z77.number().optional(),
-  highlight_color: z77.string().optional(),
-  route: z77.array(pcb_trace_route_point)
+  pcb_group_id: z78.string().optional(),
+  subcircuit_id: z78.string().optional(),
+  route_thickness_mode: z78.enum(["constant", "interpolated"]).default("constant").optional(),
+  route_order_index: z78.number().optional(),
+  should_round_corners: z78.boolean().optional(),
+  trace_length: z78.number().optional(),
+  highlight_color: z78.string().optional(),
+  route: z78.array(pcb_trace_route_point)
 }).describe("Defines a trace on the PCB");
 expectTypesMatch(true);
 expectTypesMatch(true);
-var pcb_trace_error = z78.object({
-  type: z78.literal("pcb_trace_error"),
+var pcb_trace_error = z79.object({
+  type: z79.literal("pcb_trace_error"),
   pcb_trace_error_id: getZodPrefixedIdWithDefault("pcb_trace_error"),
-  error_type: z78.literal("pcb_trace_error").default("pcb_trace_error"),
-  message: z78.string(),
+  error_type: z79.literal("pcb_trace_error").default("pcb_trace_error"),
+  message: z79.string(),
   center: point.optional(),
-  pcb_trace_id: z78.string(),
-  source_trace_id: z78.string(),
-  pcb_component_ids: z78.array(z78.string()),
-  pcb_port_ids: z78.array(z78.string()),
-  subcircuit_id: z78.string().optional()
+  pcb_trace_id: z79.string(),
+  source_trace_id: z79.string(),
+  pcb_component_ids: z79.array(z79.string()),
+  pcb_port_ids: z79.array(z79.string()),
+  subcircuit_id: z79.string().optional()
 }).describe("Defines a trace error on the PCB");
 expectTypesMatch(true);
-var pcb_trace_missing_error = z79.object({
-  type: z79.literal("pcb_trace_missing_error"),
+var pcb_trace_missing_error = z80.object({
+  type: z80.literal("pcb_trace_missing_error"),
   pcb_trace_missing_error_id: getZodPrefixedIdWithDefault(
     "pcb_trace_missing_error"
   ),
-  error_type: z79.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
-  message: z79.string(),
+  error_type: z80.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
+  message: z80.string(),
   center: point.optional(),
-  source_trace_id: z79.string(),
-  pcb_component_ids: z79.array(z79.string()),
-  pcb_port_ids: z79.array(z79.string()),
-  subcircuit_id: z79.string().optional()
+  source_trace_id: z80.string(),
+  pcb_component_ids: z80.array(z80.string()),
+  pcb_port_ids: z80.array(z80.string()),
+  subcircuit_id: z80.string().optional()
 }).describe(
   "Defines an error when a source trace has no corresponding PCB trace"
 );
 expectTypesMatch(true);
-var pcb_port_not_matched_error = z80.object({
-  type: z80.literal("pcb_port_not_matched_error"),
+var pcb_port_not_matched_error = z81.object({
+  type: z81.literal("pcb_port_not_matched_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z80.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
-  message: z80.string(),
-  pcb_component_ids: z80.array(z80.string()),
-  subcircuit_id: z80.string().optional()
+  error_type: z81.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
+  message: z81.string(),
+  pcb_component_ids: z81.array(z81.string()),
+  subcircuit_id: z81.string().optional()
 }).describe("Defines a trace error on the PCB where a port is not matched");
 expectTypesMatch(true);
-var pcb_port_not_connected_error = z81.object({
-  type: z81.literal("pcb_port_not_connected_error"),
+var pcb_port_not_connected_error = z82.object({
+  type: z82.literal("pcb_port_not_connected_error"),
   pcb_port_not_connected_error_id: getZodPrefixedIdWithDefault(
     "pcb_port_not_connected_error"
   ),
-  error_type: z81.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
-  message: z81.string(),
-  pcb_port_ids: z81.array(z81.string()),
-  pcb_component_ids: z81.array(z81.string()),
-  subcircuit_id: z81.string().optional()
+  error_type: z82.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
+  message: z82.string(),
+  pcb_port_ids: z82.array(z82.string()),
+  pcb_component_ids: z82.array(z82.string()),
+  subcircuit_id: z82.string().optional()
 }).describe("Defines an error when a pcb port is not connected to any trace");
 expectTypesMatch(
   true
 );
-var pcb_net = z82.object({
-  type: z82.literal("pcb_net"),
+var pcb_net = z83.object({
+  type: z83.literal("pcb_net"),
   pcb_net_id: getZodPrefixedIdWithDefault("pcb_net"),
-  source_net_id: z82.string().optional(),
-  highlight_color: z82.string().optional()
+  source_net_id: z83.string().optional(),
+  highlight_color: z83.string().optional()
 }).describe("Defines a net on the PCB");
 expectTypesMatch(true);
-var pcb_via = z83.object({
-  type: z83.literal("pcb_via"),
+var pcb_via = z84.object({
+  type: z84.literal("pcb_via"),
   pcb_via_id: getZodPrefixedIdWithDefault("pcb_via"),
-  pcb_group_id: z83.string().optional(),
-  subcircuit_id: z83.string().optional(),
-  subcircuit_connectivity_map_key: z83.string().optional(),
+  pcb_group_id: z84.string().optional(),
+  subcircuit_id: z84.string().optional(),
+  subcircuit_connectivity_map_key: z84.string().optional(),
   x: distance,
   y: distance,
   outer_diameter: distance.default("0.6mm"),
@@ -16565,60 +16592,60 @@ var pcb_via = z83.object({
   from_layer: layer_ref.optional(),
   /** @deprecated */
   to_layer: layer_ref.optional(),
-  layers: z83.array(layer_ref),
-  pcb_trace_id: z83.string().optional(),
-  net_is_assignable: z83.boolean().optional(),
-  net_assigned: z83.boolean().optional()
+  layers: z84.array(layer_ref),
+  pcb_trace_id: z84.string().optional(),
+  net_is_assignable: z84.boolean().optional(),
+  net_assigned: z84.boolean().optional()
 }).describe("Defines a via on the PCB");
 expectTypesMatch(true);
-var pcb_board = z84.object({
-  type: z84.literal("pcb_board"),
+var pcb_board = z85.object({
+  type: z85.literal("pcb_board"),
   pcb_board_id: getZodPrefixedIdWithDefault("pcb_board"),
-  pcb_panel_id: z84.string().optional(),
-  is_subcircuit: z84.boolean().optional(),
-  subcircuit_id: z84.string().optional(),
+  pcb_panel_id: z85.string().optional(),
+  is_subcircuit: z85.boolean().optional(),
+  subcircuit_id: z85.string().optional(),
   width: length.optional(),
   height: length.optional(),
   center: point,
   thickness: length.optional().default(1.4),
-  num_layers: z84.number().optional().default(4),
-  outline: z84.array(point).optional(),
-  shape: z84.enum(["rect", "polygon"]).optional(),
-  material: z84.enum(["fr4", "fr1"]).default("fr4")
+  num_layers: z85.number().optional().default(4),
+  outline: z85.array(point).optional(),
+  shape: z85.enum(["rect", "polygon"]).optional(),
+  material: z85.enum(["fr4", "fr1"]).default("fr4")
 }).describe("Defines the board outline of the PCB");
 expectTypesMatch(true);
-var pcb_panel = z85.object({
-  type: z85.literal("pcb_panel"),
+var pcb_panel = z86.object({
+  type: z86.literal("pcb_panel"),
   pcb_panel_id: getZodPrefixedIdWithDefault("pcb_panel"),
   width: length,
   height: length,
   center: point,
-  covered_with_solder_mask: z85.boolean().optional().default(true)
+  covered_with_solder_mask: z86.boolean().optional().default(true)
 }).describe("Defines a PCB panel that can contain multiple boards");
 expectTypesMatch(true);
-var pcb_placement_error = z86.object({
-  type: z86.literal("pcb_placement_error"),
+var pcb_placement_error = z87.object({
+  type: z87.literal("pcb_placement_error"),
   pcb_placement_error_id: getZodPrefixedIdWithDefault("pcb_placement_error"),
-  error_type: z86.literal("pcb_placement_error").default("pcb_placement_error"),
-  message: z86.string(),
-  subcircuit_id: z86.string().optional()
+  error_type: z87.literal("pcb_placement_error").default("pcb_placement_error"),
+  message: z87.string(),
+  subcircuit_id: z87.string().optional()
 }).describe("Defines a placement error on the PCB");
 expectTypesMatch(true);
-var pcb_trace_hint = z87.object({
-  type: z87.literal("pcb_trace_hint"),
+var pcb_trace_hint = z88.object({
+  type: z88.literal("pcb_trace_hint"),
   pcb_trace_hint_id: getZodPrefixedIdWithDefault("pcb_trace_hint"),
-  pcb_port_id: z87.string(),
-  pcb_component_id: z87.string(),
-  route: z87.array(route_hint_point),
-  subcircuit_id: z87.string().optional()
+  pcb_port_id: z88.string(),
+  pcb_component_id: z88.string(),
+  route: z88.array(route_hint_point),
+  subcircuit_id: z88.string().optional()
 }).describe("A hint that can be used during generation of a PCB trace");
 expectTypesMatch(true);
-var pcb_silkscreen_line = z88.object({
-  type: z88.literal("pcb_silkscreen_line"),
+var pcb_silkscreen_line = z89.object({
+  type: z89.literal("pcb_silkscreen_line"),
   pcb_silkscreen_line_id: getZodPrefixedIdWithDefault("pcb_silkscreen_line"),
-  pcb_component_id: z88.string(),
-  pcb_group_id: z88.string().optional(),
-  subcircuit_id: z88.string().optional(),
+  pcb_component_id: z89.string(),
+  pcb_group_id: z89.string().optional(),
+  subcircuit_id: z89.string().optional(),
   stroke_width: distance.default("0.1mm"),
   x1: distance,
   y1: distance,
@@ -16627,28 +16654,28 @@ var pcb_silkscreen_line = z88.object({
   layer: visible_layer
 }).describe("Defines a silkscreen line on the PCB");
 expectTypesMatch(true);
-var pcb_silkscreen_path = z89.object({
-  type: z89.literal("pcb_silkscreen_path"),
+var pcb_silkscreen_path = z90.object({
+  type: z90.literal("pcb_silkscreen_path"),
   pcb_silkscreen_path_id: getZodPrefixedIdWithDefault("pcb_silkscreen_path"),
-  pcb_component_id: z89.string(),
-  pcb_group_id: z89.string().optional(),
-  subcircuit_id: z89.string().optional(),
+  pcb_component_id: z90.string(),
+  pcb_group_id: z90.string().optional(),
+  subcircuit_id: z90.string().optional(),
   layer: visible_layer,
-  route: z89.array(point),
+  route: z90.array(point),
   stroke_width: length
 }).describe("Defines a silkscreen path on the PCB");
 expectTypesMatch(true);
-var pcb_silkscreen_text = z90.object({
-  type: z90.literal("pcb_silkscreen_text"),
+var pcb_silkscreen_text = z91.object({
+  type: z91.literal("pcb_silkscreen_text"),
   pcb_silkscreen_text_id: getZodPrefixedIdWithDefault("pcb_silkscreen_text"),
-  pcb_group_id: z90.string().optional(),
-  subcircuit_id: z90.string().optional(),
-  font: z90.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z91.string().optional(),
+  subcircuit_id: z91.string().optional(),
+  font: z91.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z90.string(),
-  text: z90.string(),
-  is_knockout: z90.boolean().default(false).optional(),
-  knockout_padding: z90.object({
+  pcb_component_id: z91.string(),
+  text: z91.string(),
+  is_knockout: z91.boolean().default(false).optional(),
+  knockout_padding: z91.object({
     left: length,
     top: length,
     bottom: length,
@@ -16659,24 +16686,24 @@ var pcb_silkscreen_text = z90.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z90.number().optional(),
+  ccw_rotation: z91.number().optional(),
   layer: layer_ref,
-  is_mirrored: z90.boolean().default(false).optional(),
+  is_mirrored: z91.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines silkscreen text on the PCB");
 expectTypesMatch(true);
-var pcb_copper_text = z91.object({
-  type: z91.literal("pcb_copper_text"),
+var pcb_copper_text = z92.object({
+  type: z92.literal("pcb_copper_text"),
   pcb_copper_text_id: getZodPrefixedIdWithDefault("pcb_copper_text"),
-  pcb_group_id: z91.string().optional(),
-  subcircuit_id: z91.string().optional(),
-  font: z91.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z92.string().optional(),
+  subcircuit_id: z92.string().optional(),
+  font: z92.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z91.string(),
-  text: z91.string(),
-  is_knockout: z91.boolean().default(false).optional(),
-  knockout_padding: z91.object({
+  pcb_component_id: z92.string(),
+  text: z92.string(),
+  is_knockout: z92.boolean().default(false).optional(),
+  knockout_padding: z92.object({
     left: length,
     top: length,
     bottom: length,
@@ -16687,273 +16714,273 @@ var pcb_copper_text = z91.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z91.number().optional(),
+  ccw_rotation: z92.number().optional(),
   layer: layer_ref,
-  is_mirrored: z91.boolean().default(false).optional(),
+  is_mirrored: z92.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines copper text on the PCB");
 expectTypesMatch(true);
-var pcb_silkscreen_rect = z92.object({
-  type: z92.literal("pcb_silkscreen_rect"),
+var pcb_silkscreen_rect = z93.object({
+  type: z93.literal("pcb_silkscreen_rect"),
   pcb_silkscreen_rect_id: getZodPrefixedIdWithDefault("pcb_silkscreen_rect"),
-  pcb_component_id: z92.string(),
-  pcb_group_id: z92.string().optional(),
-  subcircuit_id: z92.string().optional(),
+  pcb_component_id: z93.string(),
+  pcb_group_id: z93.string().optional(),
+  subcircuit_id: z93.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: layer_ref,
   stroke_width: length.default("1mm"),
   corner_radius: length.optional(),
-  is_filled: z92.boolean().default(true).optional(),
-  has_stroke: z92.boolean().optional(),
-  is_stroke_dashed: z92.boolean().optional()
+  is_filled: z93.boolean().default(true).optional(),
+  has_stroke: z93.boolean().optional(),
+  is_stroke_dashed: z93.boolean().optional()
 }).describe("Defines a silkscreen rect on the PCB");
 expectTypesMatch(true);
-var pcb_silkscreen_circle = z93.object({
-  type: z93.literal("pcb_silkscreen_circle"),
+var pcb_silkscreen_circle = z94.object({
+  type: z94.literal("pcb_silkscreen_circle"),
   pcb_silkscreen_circle_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_circle"
   ),
-  pcb_component_id: z93.string(),
-  pcb_group_id: z93.string().optional(),
-  subcircuit_id: z93.string().optional(),
+  pcb_component_id: z94.string(),
+  pcb_group_id: z94.string().optional(),
+  subcircuit_id: z94.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
   stroke_width: length.default("1mm")
 }).describe("Defines a silkscreen circle on the PCB");
 expectTypesMatch(true);
-var pcb_silkscreen_oval = z94.object({
-  type: z94.literal("pcb_silkscreen_oval"),
+var pcb_silkscreen_oval = z95.object({
+  type: z95.literal("pcb_silkscreen_oval"),
   pcb_silkscreen_oval_id: getZodPrefixedIdWithDefault("pcb_silkscreen_oval"),
-  pcb_component_id: z94.string(),
-  pcb_group_id: z94.string().optional(),
-  subcircuit_id: z94.string().optional(),
+  pcb_component_id: z95.string(),
+  pcb_group_id: z95.string().optional(),
+  subcircuit_id: z95.string().optional(),
   center: point,
   radius_x: distance,
   radius_y: distance,
   layer: visible_layer
 }).describe("Defines a silkscreen oval on the PCB");
 expectTypesMatch(true);
-var pcb_fabrication_note_text = z95.object({
-  type: z95.literal("pcb_fabrication_note_text"),
+var pcb_fabrication_note_text = z96.object({
+  type: z96.literal("pcb_fabrication_note_text"),
   pcb_fabrication_note_text_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_text"
   ),
-  subcircuit_id: z95.string().optional(),
-  pcb_group_id: z95.string().optional(),
-  font: z95.literal("tscircuit2024").default("tscircuit2024"),
+  subcircuit_id: z96.string().optional(),
+  pcb_group_id: z96.string().optional(),
+  font: z96.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  pcb_component_id: z95.string(),
-  text: z95.string(),
+  pcb_component_id: z96.string(),
+  text: z96.string(),
   layer: visible_layer,
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z95.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z95.string().optional()
+  anchor_alignment: z96.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  color: z96.string().optional()
 }).describe(
   "Defines a fabrication note in text on the PCB, useful for leaving notes for assemblers or fabricators"
 );
 expectTypesMatch(true);
-var pcb_fabrication_note_path = z96.object({
-  type: z96.literal("pcb_fabrication_note_path"),
+var pcb_fabrication_note_path = z97.object({
+  type: z97.literal("pcb_fabrication_note_path"),
   pcb_fabrication_note_path_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_path"
   ),
-  pcb_component_id: z96.string(),
-  subcircuit_id: z96.string().optional(),
+  pcb_component_id: z97.string(),
+  subcircuit_id: z97.string().optional(),
   layer: layer_ref,
-  route: z96.array(point),
+  route: z97.array(point),
   stroke_width: length,
-  color: z96.string().optional()
+  color: z97.string().optional()
 }).describe(
   "Defines a fabrication path on the PCB for fabricators or assemblers"
 );
 expectTypesMatch(true);
-var pcb_fabrication_note_rect = z97.object({
-  type: z97.literal("pcb_fabrication_note_rect"),
+var pcb_fabrication_note_rect = z98.object({
+  type: z98.literal("pcb_fabrication_note_rect"),
   pcb_fabrication_note_rect_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_rect"
   ),
-  pcb_component_id: z97.string(),
-  pcb_group_id: z97.string().optional(),
-  subcircuit_id: z97.string().optional(),
+  pcb_component_id: z98.string(),
+  pcb_group_id: z98.string().optional(),
+  subcircuit_id: z98.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   stroke_width: length.default("0.1mm"),
   corner_radius: length.optional(),
-  is_filled: z97.boolean().optional(),
-  has_stroke: z97.boolean().optional(),
-  is_stroke_dashed: z97.boolean().optional(),
-  color: z97.string().optional()
+  is_filled: z98.boolean().optional(),
+  has_stroke: z98.boolean().optional(),
+  is_stroke_dashed: z98.boolean().optional(),
+  color: z98.string().optional()
 }).describe("Defines a fabrication note rectangle on the PCB");
 expectTypesMatch(true);
-var pcb_fabrication_note_dimension = z98.object({
-  type: z98.literal("pcb_fabrication_note_dimension"),
+var pcb_fabrication_note_dimension = z99.object({
+  type: z99.literal("pcb_fabrication_note_dimension"),
   pcb_fabrication_note_dimension_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_dimension"
   ),
-  pcb_component_id: z98.string(),
-  pcb_group_id: z98.string().optional(),
-  subcircuit_id: z98.string().optional(),
+  pcb_component_id: z99.string(),
+  pcb_group_id: z99.string().optional(),
+  subcircuit_id: z99.string().optional(),
   layer: visible_layer,
   from: point,
   to: point,
-  text: z98.string().optional(),
-  text_ccw_rotation: z98.number().optional(),
+  text: z99.string().optional(),
+  text_ccw_rotation: z99.number().optional(),
   offset: length.optional(),
   offset_distance: length.optional(),
-  offset_direction: z98.object({
-    x: z98.number(),
-    y: z98.number()
+  offset_direction: z99.object({
+    x: z99.number(),
+    y: z99.number()
   }).optional(),
-  font: z98.literal("tscircuit2024").default("tscircuit2024"),
+  font: z99.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
-  color: z98.string().optional(),
+  color: z99.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB fabrication notes");
 expectTypesMatch(true);
-var pcb_note_text = z99.object({
-  type: z99.literal("pcb_note_text"),
+var pcb_note_text = z100.object({
+  type: z100.literal("pcb_note_text"),
   pcb_note_text_id: getZodPrefixedIdWithDefault("pcb_note_text"),
-  pcb_component_id: z99.string().optional(),
-  pcb_group_id: z99.string().optional(),
-  subcircuit_id: z99.string().optional(),
-  name: z99.string().optional(),
-  font: z99.literal("tscircuit2024").default("tscircuit2024"),
-  font_size: distance.default("1mm"),
-  text: z99.string().optional(),
-  anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z99.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z99.string().optional()
-}).describe("Defines a documentation note in text on the PCB");
-expectTypesMatch(true);
-var pcb_note_rect = z100.object({
-  type: z100.literal("pcb_note_rect"),
-  pcb_note_rect_id: getZodPrefixedIdWithDefault("pcb_note_rect"),
   pcb_component_id: z100.string().optional(),
   pcb_group_id: z100.string().optional(),
   subcircuit_id: z100.string().optional(),
   name: z100.string().optional(),
+  font: z100.literal("tscircuit2024").default("tscircuit2024"),
+  font_size: distance.default("1mm"),
   text: z100.string().optional(),
-  center: point,
-  width: length,
-  height: length,
-  stroke_width: length.default("0.1mm"),
-  corner_radius: length.optional(),
-  is_filled: z100.boolean().optional(),
-  has_stroke: z100.boolean().optional(),
-  is_stroke_dashed: z100.boolean().optional(),
+  anchor_position: point.default({ x: 0, y: 0 }),
+  anchor_alignment: z100.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
   color: z100.string().optional()
-}).describe("Defines a rectangular documentation note on the PCB");
+}).describe("Defines a documentation note in text on the PCB");
 expectTypesMatch(true);
-var pcb_note_path = z101.object({
-  type: z101.literal("pcb_note_path"),
-  pcb_note_path_id: getZodPrefixedIdWithDefault("pcb_note_path"),
+var pcb_note_rect = z101.object({
+  type: z101.literal("pcb_note_rect"),
+  pcb_note_rect_id: getZodPrefixedIdWithDefault("pcb_note_rect"),
   pcb_component_id: z101.string().optional(),
   pcb_group_id: z101.string().optional(),
   subcircuit_id: z101.string().optional(),
   name: z101.string().optional(),
   text: z101.string().optional(),
-  route: z101.array(point),
+  center: point,
+  width: length,
+  height: length,
   stroke_width: length.default("0.1mm"),
+  corner_radius: length.optional(),
+  is_filled: z101.boolean().optional(),
+  has_stroke: z101.boolean().optional(),
+  is_stroke_dashed: z101.boolean().optional(),
   color: z101.string().optional()
-}).describe("Defines a polyline documentation note on the PCB");
+}).describe("Defines a rectangular documentation note on the PCB");
 expectTypesMatch(true);
-var pcb_note_line = z102.object({
-  type: z102.literal("pcb_note_line"),
-  pcb_note_line_id: getZodPrefixedIdWithDefault("pcb_note_line"),
+var pcb_note_path = z102.object({
+  type: z102.literal("pcb_note_path"),
+  pcb_note_path_id: getZodPrefixedIdWithDefault("pcb_note_path"),
   pcb_component_id: z102.string().optional(),
   pcb_group_id: z102.string().optional(),
   subcircuit_id: z102.string().optional(),
   name: z102.string().optional(),
   text: z102.string().optional(),
+  route: z102.array(point),
+  stroke_width: length.default("0.1mm"),
+  color: z102.string().optional()
+}).describe("Defines a polyline documentation note on the PCB");
+expectTypesMatch(true);
+var pcb_note_line = z103.object({
+  type: z103.literal("pcb_note_line"),
+  pcb_note_line_id: getZodPrefixedIdWithDefault("pcb_note_line"),
+  pcb_component_id: z103.string().optional(),
+  pcb_group_id: z103.string().optional(),
+  subcircuit_id: z103.string().optional(),
+  name: z103.string().optional(),
+  text: z103.string().optional(),
   x1: distance,
   y1: distance,
   x2: distance,
   y2: distance,
   stroke_width: distance.default("0.1mm"),
-  color: z102.string().optional(),
-  is_dashed: z102.boolean().optional()
+  color: z103.string().optional(),
+  is_dashed: z103.boolean().optional()
 }).describe("Defines a straight documentation note line on the PCB");
 expectTypesMatch(true);
-var pcb_note_dimension = z103.object({
-  type: z103.literal("pcb_note_dimension"),
+var pcb_note_dimension = z104.object({
+  type: z104.literal("pcb_note_dimension"),
   pcb_note_dimension_id: getZodPrefixedIdWithDefault("pcb_note_dimension"),
-  pcb_component_id: z103.string().optional(),
-  pcb_group_id: z103.string().optional(),
-  subcircuit_id: z103.string().optional(),
-  name: z103.string().optional(),
+  pcb_component_id: z104.string().optional(),
+  pcb_group_id: z104.string().optional(),
+  subcircuit_id: z104.string().optional(),
+  name: z104.string().optional(),
   from: point,
   to: point,
-  text: z103.string().optional(),
-  text_ccw_rotation: z103.number().optional(),
+  text: z104.string().optional(),
+  text_ccw_rotation: z104.number().optional(),
   offset_distance: length.optional(),
-  offset_direction: z103.object({
-    x: z103.number(),
-    y: z103.number()
+  offset_direction: z104.object({
+    x: z104.number(),
+    y: z104.number()
   }).optional(),
-  font: z103.literal("tscircuit2024").default("tscircuit2024"),
+  font: z104.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
-  color: z103.string().optional(),
+  color: z104.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB documentation notes");
 expectTypesMatch(true);
-var pcb_footprint_overlap_error = z104.object({
-  type: z104.literal("pcb_footprint_overlap_error"),
+var pcb_footprint_overlap_error = z105.object({
+  type: z105.literal("pcb_footprint_overlap_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z104.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
-  message: z104.string(),
-  pcb_smtpad_ids: z104.array(z104.string()).optional(),
-  pcb_plated_hole_ids: z104.array(z104.string()).optional(),
-  pcb_hole_ids: z104.array(z104.string()).optional(),
-  pcb_keepout_ids: z104.array(z104.string()).optional()
+  error_type: z105.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
+  message: z105.string(),
+  pcb_smtpad_ids: z105.array(z105.string()).optional(),
+  pcb_plated_hole_ids: z105.array(z105.string()).optional(),
+  pcb_hole_ids: z105.array(z105.string()).optional(),
+  pcb_keepout_ids: z105.array(z105.string()).optional()
 }).describe("Error emitted when a pcb footprint overlaps with another element");
 expectTypesMatch(
   true
 );
-var pcb_keepout = z105.object({
-  type: z105.literal("pcb_keepout"),
-  shape: z105.literal("rect"),
-  pcb_group_id: z105.string().optional(),
-  subcircuit_id: z105.string().optional(),
+var pcb_keepout = z106.object({
+  type: z106.literal("pcb_keepout"),
+  shape: z106.literal("rect"),
+  pcb_group_id: z106.string().optional(),
+  subcircuit_id: z106.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  pcb_keepout_id: z105.string(),
-  layers: z105.array(z105.string()),
+  pcb_keepout_id: z106.string(),
+  layers: z106.array(z106.string()),
   // Specify layers where the keepout applies
-  description: z105.string().optional()
+  description: z106.string().optional()
   // Optional description of the keepout
 }).or(
-  z105.object({
-    type: z105.literal("pcb_keepout"),
-    shape: z105.literal("circle"),
-    pcb_group_id: z105.string().optional(),
-    subcircuit_id: z105.string().optional(),
+  z106.object({
+    type: z106.literal("pcb_keepout"),
+    shape: z106.literal("circle"),
+    pcb_group_id: z106.string().optional(),
+    subcircuit_id: z106.string().optional(),
     center: point,
     radius: distance,
-    pcb_keepout_id: z105.string(),
-    layers: z105.array(z105.string()),
+    pcb_keepout_id: z106.string(),
+    layers: z106.array(z106.string()),
     // Specify layers where the keepout applies
-    description: z105.string().optional()
+    description: z106.string().optional()
     // Optional description of the keepout
   })
 );
 expectTypesMatch(true);
-var pcb_cutout_base = z106.object({
-  type: z106.literal("pcb_cutout"),
+var pcb_cutout_base = z107.object({
+  type: z107.literal("pcb_cutout"),
   pcb_cutout_id: getZodPrefixedIdWithDefault("pcb_cutout"),
-  pcb_group_id: z106.string().optional(),
-  subcircuit_id: z106.string().optional(),
-  pcb_board_id: z106.string().optional(),
-  pcb_panel_id: z106.string().optional()
+  pcb_group_id: z107.string().optional(),
+  subcircuit_id: z107.string().optional(),
+  pcb_board_id: z107.string().optional(),
+  pcb_panel_id: z107.string().optional()
 });
 var pcb_cutout_rect = pcb_cutout_base.extend({
-  shape: z106.literal("rect"),
+  shape: z107.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -16962,179 +16989,179 @@ var pcb_cutout_rect = pcb_cutout_base.extend({
 });
 expectTypesMatch(true);
 var pcb_cutout_circle = pcb_cutout_base.extend({
-  shape: z106.literal("circle"),
+  shape: z107.literal("circle"),
   center: point,
   radius: length
 });
 expectTypesMatch(true);
 var pcb_cutout_polygon = pcb_cutout_base.extend({
-  shape: z106.literal("polygon"),
-  points: z106.array(point)
+  shape: z107.literal("polygon"),
+  points: z107.array(point)
 });
 expectTypesMatch(true);
 var pcb_cutout_path = pcb_cutout_base.extend({
-  shape: z106.literal("path"),
-  route: z106.array(point),
+  shape: z107.literal("path"),
+  route: z107.array(point),
   slot_width: length,
   slot_length: length.optional(),
   space_between_slots: length.optional(),
   slot_corner_radius: length.optional()
 });
 expectTypesMatch(true);
-var pcb_cutout = z106.discriminatedUnion("shape", [
+var pcb_cutout = z107.discriminatedUnion("shape", [
   pcb_cutout_rect,
   pcb_cutout_circle,
   pcb_cutout_polygon,
   pcb_cutout_path
 ]).describe("Defines a cutout on the PCB, removing board material.");
 expectTypesMatch(true);
-var pcb_missing_footprint_error = z107.object({
-  type: z107.literal("pcb_missing_footprint_error"),
+var pcb_missing_footprint_error = z108.object({
+  type: z108.literal("pcb_missing_footprint_error"),
   pcb_missing_footprint_error_id: getZodPrefixedIdWithDefault(
     "pcb_missing_footprint_error"
   ),
-  pcb_group_id: z107.string().optional(),
-  subcircuit_id: z107.string().optional(),
-  error_type: z107.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
-  source_component_id: z107.string(),
-  message: z107.string()
+  pcb_group_id: z108.string().optional(),
+  subcircuit_id: z108.string().optional(),
+  error_type: z108.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
+  source_component_id: z108.string(),
+  message: z108.string()
 }).describe("Defines a missing footprint error on the PCB");
 expectTypesMatch(
   true
 );
-var external_footprint_load_error = z108.object({
-  type: z108.literal("external_footprint_load_error"),
+var external_footprint_load_error = z109.object({
+  type: z109.literal("external_footprint_load_error"),
   external_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "external_footprint_load_error"
   ),
-  pcb_component_id: z108.string(),
-  source_component_id: z108.string(),
-  pcb_group_id: z108.string().optional(),
-  subcircuit_id: z108.string().optional(),
-  footprinter_string: z108.string().optional(),
-  error_type: z108.literal("external_footprint_load_error").default("external_footprint_load_error"),
-  message: z108.string()
+  pcb_component_id: z109.string(),
+  source_component_id: z109.string(),
+  pcb_group_id: z109.string().optional(),
+  subcircuit_id: z109.string().optional(),
+  footprinter_string: z109.string().optional(),
+  error_type: z109.literal("external_footprint_load_error").default("external_footprint_load_error"),
+  message: z109.string()
 }).describe("Defines an error when an external footprint fails to load");
 expectTypesMatch(true);
-var circuit_json_footprint_load_error = z109.object({
-  type: z109.literal("circuit_json_footprint_load_error"),
+var circuit_json_footprint_load_error = z110.object({
+  type: z110.literal("circuit_json_footprint_load_error"),
   circuit_json_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "circuit_json_footprint_load_error"
   ),
-  pcb_component_id: z109.string(),
-  source_component_id: z109.string(),
-  pcb_group_id: z109.string().optional(),
-  subcircuit_id: z109.string().optional(),
-  error_type: z109.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
-  message: z109.string(),
-  circuit_json: z109.array(z109.any()).optional()
+  pcb_component_id: z110.string(),
+  source_component_id: z110.string(),
+  pcb_group_id: z110.string().optional(),
+  subcircuit_id: z110.string().optional(),
+  error_type: z110.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
+  message: z110.string(),
+  circuit_json: z110.array(z110.any()).optional()
 }).describe("Defines an error when a circuit JSON footprint fails to load");
 expectTypesMatch(true);
-var pcb_group = z110.object({
-  type: z110.literal("pcb_group"),
+var pcb_group = z111.object({
+  type: z111.literal("pcb_group"),
   pcb_group_id: getZodPrefixedIdWithDefault("pcb_group"),
-  source_group_id: z110.string(),
-  is_subcircuit: z110.boolean().optional(),
-  subcircuit_id: z110.string().optional(),
+  source_group_id: z111.string(),
+  is_subcircuit: z111.boolean().optional(),
+  subcircuit_id: z111.string().optional(),
   width: length.optional(),
   height: length.optional(),
   center: point,
-  outline: z110.array(point).optional(),
+  outline: z111.array(point).optional(),
   anchor_position: point.optional(),
-  anchor_alignment: z110.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).optional(),
-  pcb_component_ids: z110.array(z110.string()),
-  child_layout_mode: z110.enum(["packed", "none"]).optional(),
-  name: z110.string().optional(),
-  description: z110.string().optional(),
-  layout_mode: z110.string().optional(),
-  autorouter_configuration: z110.object({
+  anchor_alignment: z111.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).optional(),
+  pcb_component_ids: z111.array(z111.string()),
+  child_layout_mode: z111.enum(["packed", "none"]).optional(),
+  name: z111.string().optional(),
+  description: z111.string().optional(),
+  layout_mode: z111.string().optional(),
+  autorouter_configuration: z111.object({
     trace_clearance: length
   }).optional(),
-  autorouter_used_string: z110.string().optional()
+  autorouter_used_string: z111.string().optional()
 }).describe("Defines a group of components on the PCB");
 expectTypesMatch(true);
-var pcb_autorouting_error = z111.object({
-  type: z111.literal("pcb_autorouting_error"),
+var pcb_autorouting_error = z112.object({
+  type: z112.literal("pcb_autorouting_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_autorouting_error"),
-  error_type: z111.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
-  message: z111.string(),
-  subcircuit_id: z111.string().optional()
+  error_type: z112.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
+  message: z112.string(),
+  subcircuit_id: z112.string().optional()
 }).describe("The autorouting has failed to route a portion of the board");
 expectTypesMatch(true);
-var pcb_manual_edit_conflict_warning = z112.object({
-  type: z112.literal("pcb_manual_edit_conflict_warning"),
+var pcb_manual_edit_conflict_warning = z113.object({
+  type: z113.literal("pcb_manual_edit_conflict_warning"),
   pcb_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "pcb_manual_edit_conflict_warning"
   ),
-  warning_type: z112.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
-  message: z112.string(),
-  pcb_component_id: z112.string(),
-  pcb_group_id: z112.string().optional(),
-  subcircuit_id: z112.string().optional(),
-  source_component_id: z112.string()
+  warning_type: z113.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
+  message: z113.string(),
+  pcb_component_id: z113.string(),
+  pcb_group_id: z113.string().optional(),
+  subcircuit_id: z113.string().optional(),
+  source_component_id: z113.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit pcbX/pcbY coordinates"
 );
 expectTypesMatch(true);
-var pcb_breakout_point = z113.object({
-  type: z113.literal("pcb_breakout_point"),
+var pcb_breakout_point = z114.object({
+  type: z114.literal("pcb_breakout_point"),
   pcb_breakout_point_id: getZodPrefixedIdWithDefault("pcb_breakout_point"),
-  pcb_group_id: z113.string(),
-  subcircuit_id: z113.string().optional(),
-  source_trace_id: z113.string().optional(),
-  source_port_id: z113.string().optional(),
-  source_net_id: z113.string().optional(),
+  pcb_group_id: z114.string(),
+  subcircuit_id: z114.string().optional(),
+  source_trace_id: z114.string().optional(),
+  source_port_id: z114.string().optional(),
+  source_net_id: z114.string().optional(),
   x: distance,
   y: distance
 }).describe(
   "Defines a routing target within a pcb_group for a source_trace or source_net"
 );
 expectTypesMatch(true);
-var pcb_ground_plane = z114.object({
-  type: z114.literal("pcb_ground_plane"),
+var pcb_ground_plane = z115.object({
+  type: z115.literal("pcb_ground_plane"),
   pcb_ground_plane_id: getZodPrefixedIdWithDefault("pcb_ground_plane"),
-  source_pcb_ground_plane_id: z114.string(),
-  source_net_id: z114.string(),
-  pcb_group_id: z114.string().optional(),
-  subcircuit_id: z114.string().optional()
+  source_pcb_ground_plane_id: z115.string(),
+  source_net_id: z115.string(),
+  pcb_group_id: z115.string().optional(),
+  subcircuit_id: z115.string().optional()
 }).describe("Defines a ground plane on the PCB");
 expectTypesMatch(true);
-var pcb_ground_plane_region = z115.object({
-  type: z115.literal("pcb_ground_plane_region"),
+var pcb_ground_plane_region = z116.object({
+  type: z116.literal("pcb_ground_plane_region"),
   pcb_ground_plane_region_id: getZodPrefixedIdWithDefault(
     "pcb_ground_plane_region"
   ),
-  pcb_ground_plane_id: z115.string(),
-  pcb_group_id: z115.string().optional(),
-  subcircuit_id: z115.string().optional(),
+  pcb_ground_plane_id: z116.string(),
+  pcb_group_id: z116.string().optional(),
+  subcircuit_id: z116.string().optional(),
   layer: layer_ref,
-  points: z115.array(point)
+  points: z116.array(point)
 }).describe("Defines a polygon region of a ground plane");
 expectTypesMatch(true);
-var pcb_thermal_spoke = z116.object({
-  type: z116.literal("pcb_thermal_spoke"),
+var pcb_thermal_spoke = z117.object({
+  type: z117.literal("pcb_thermal_spoke"),
   pcb_thermal_spoke_id: getZodPrefixedIdWithDefault("pcb_thermal_spoke"),
-  pcb_ground_plane_id: z116.string(),
-  shape: z116.string(),
-  spoke_count: z116.number(),
+  pcb_ground_plane_id: z117.string(),
+  shape: z117.string(),
+  spoke_count: z117.number(),
   spoke_thickness: distance,
   spoke_inner_diameter: distance,
   spoke_outer_diameter: distance,
-  pcb_plated_hole_id: z116.string().optional(),
-  subcircuit_id: z116.string().optional()
+  pcb_plated_hole_id: z117.string().optional(),
+  subcircuit_id: z117.string().optional()
 }).describe("Pattern for connecting a ground plane to a plated hole");
 expectTypesMatch(true);
-var pcb_copper_pour_base = z117.object({
-  type: z117.literal("pcb_copper_pour"),
+var pcb_copper_pour_base = z118.object({
+  type: z118.literal("pcb_copper_pour"),
   pcb_copper_pour_id: getZodPrefixedIdWithDefault("pcb_copper_pour"),
-  pcb_group_id: z117.string().optional(),
-  subcircuit_id: z117.string().optional(),
+  pcb_group_id: z118.string().optional(),
+  subcircuit_id: z118.string().optional(),
   layer: layer_ref,
-  source_net_id: z117.string().optional(),
-  covered_with_solder_mask: z117.boolean().optional().default(true)
+  source_net_id: z118.string().optional(),
+  covered_with_solder_mask: z118.boolean().optional().default(true)
 });
 var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
-  shape: z117.literal("rect"),
+  shape: z118.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -17142,140 +17169,140 @@ var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
 });
 expectTypesMatch(true);
 var pcb_copper_pour_brep = pcb_copper_pour_base.extend({
-  shape: z117.literal("brep"),
+  shape: z118.literal("brep"),
   brep_shape
 });
 expectTypesMatch(true);
 var pcb_copper_pour_polygon = pcb_copper_pour_base.extend({
-  shape: z117.literal("polygon"),
-  points: z117.array(point)
+  shape: z118.literal("polygon"),
+  points: z118.array(point)
 });
 expectTypesMatch(true);
-var pcb_copper_pour = z117.discriminatedUnion("shape", [
+var pcb_copper_pour = z118.discriminatedUnion("shape", [
   pcb_copper_pour_rect,
   pcb_copper_pour_brep,
   pcb_copper_pour_polygon
 ]).describe("Defines a copper pour on the PCB.");
 expectTypesMatch(true);
-var pcb_component_outside_board_error = z118.object({
-  type: z118.literal("pcb_component_outside_board_error"),
+var pcb_component_outside_board_error = z119.object({
+  type: z119.literal("pcb_component_outside_board_error"),
   pcb_component_outside_board_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_outside_board_error"
   ),
-  error_type: z118.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
-  message: z118.string(),
-  pcb_component_id: z118.string(),
-  pcb_board_id: z118.string(),
+  error_type: z119.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
+  message: z119.string(),
+  pcb_component_id: z119.string(),
+  pcb_board_id: z119.string(),
   component_center: point,
-  component_bounds: z118.object({
-    min_x: z118.number(),
-    max_x: z118.number(),
-    min_y: z118.number(),
-    max_y: z118.number()
+  component_bounds: z119.object({
+    min_x: z119.number(),
+    max_x: z119.number(),
+    min_y: z119.number(),
+    max_y: z119.number()
   }),
-  subcircuit_id: z118.string().optional(),
-  source_component_id: z118.string().optional()
+  subcircuit_id: z119.string().optional(),
+  source_component_id: z119.string().optional()
 }).describe(
   "Error emitted when a PCB component is placed outside the board boundaries"
 );
 expectTypesMatch(true);
-var pcb_component_invalid_layer_error = z119.object({
-  type: z119.literal("pcb_component_invalid_layer_error"),
+var pcb_component_invalid_layer_error = z120.object({
+  type: z120.literal("pcb_component_invalid_layer_error"),
   pcb_component_invalid_layer_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_invalid_layer_error"
   ),
-  error_type: z119.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
-  message: z119.string(),
-  pcb_component_id: z119.string().optional(),
-  source_component_id: z119.string(),
+  error_type: z120.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
+  message: z120.string(),
+  pcb_component_id: z120.string().optional(),
+  source_component_id: z120.string(),
   layer: layer_ref,
-  subcircuit_id: z119.string().optional()
+  subcircuit_id: z120.string().optional()
 }).describe(
   "Error emitted when a component is placed on an invalid layer (components can only be on 'top' or 'bottom' layers)"
 );
 expectTypesMatch(true);
-var pcb_via_clearance_error = z120.object({
-  type: z120.literal("pcb_via_clearance_error"),
+var pcb_via_clearance_error = z121.object({
+  type: z121.literal("pcb_via_clearance_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z120.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
-  message: z120.string(),
-  pcb_via_ids: z120.array(z120.string()).min(2),
+  error_type: z121.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
+  message: z121.string(),
+  pcb_via_ids: z121.array(z121.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  pcb_center: z120.object({
-    x: z120.number().optional(),
-    y: z120.number().optional()
+  pcb_center: z121.object({
+    x: z121.number().optional(),
+    y: z121.number().optional()
   }).optional(),
-  subcircuit_id: z120.string().optional()
+  subcircuit_id: z121.string().optional()
 }).describe("Error emitted when vias are closer than the allowed clearance");
 expectTypesMatch(true);
-var pcb_courtyard_rect = z121.object({
-  type: z121.literal("pcb_courtyard_rect"),
+var pcb_courtyard_rect = z122.object({
+  type: z122.literal("pcb_courtyard_rect"),
   pcb_courtyard_rect_id: getZodPrefixedIdWithDefault("pcb_courtyard_rect"),
-  pcb_component_id: z121.string(),
-  pcb_group_id: z121.string().optional(),
-  subcircuit_id: z121.string().optional(),
+  pcb_component_id: z122.string(),
+  pcb_group_id: z122.string().optional(),
+  subcircuit_id: z122.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
-  color: z121.string().optional()
+  color: z122.string().optional()
 }).describe("Defines a courtyard rectangle on the PCB");
 expectTypesMatch(true);
-var pcb_courtyard_outline = z122.object({
-  type: z122.literal("pcb_courtyard_outline"),
+var pcb_courtyard_outline = z123.object({
+  type: z123.literal("pcb_courtyard_outline"),
   pcb_courtyard_outline_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_outline"
   ),
-  pcb_component_id: z122.string(),
-  pcb_group_id: z122.string().optional(),
-  subcircuit_id: z122.string().optional(),
+  pcb_component_id: z123.string(),
+  pcb_group_id: z123.string().optional(),
+  subcircuit_id: z123.string().optional(),
   layer: visible_layer,
-  outline: z122.array(point).min(2),
+  outline: z123.array(point).min(2),
   stroke_width: length.default("0.1mm"),
-  is_closed: z122.boolean().optional(),
-  is_stroke_dashed: z122.boolean().optional(),
-  color: z122.string().optional()
+  is_closed: z123.boolean().optional(),
+  is_stroke_dashed: z123.boolean().optional(),
+  color: z123.string().optional()
 }).describe("Defines a courtyard outline on the PCB");
 expectTypesMatch(true);
-var pcb_courtyard_polygon = z123.object({
-  type: z123.literal("pcb_courtyard_polygon"),
+var pcb_courtyard_polygon = z124.object({
+  type: z124.literal("pcb_courtyard_polygon"),
   pcb_courtyard_polygon_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_polygon"
   ),
-  pcb_component_id: z123.string(),
-  pcb_group_id: z123.string().optional(),
-  subcircuit_id: z123.string().optional(),
+  pcb_component_id: z124.string(),
+  pcb_group_id: z124.string().optional(),
+  subcircuit_id: z124.string().optional(),
   layer: visible_layer,
-  points: z123.array(point).min(3),
-  color: z123.string().optional()
+  points: z124.array(point).min(3),
+  color: z124.string().optional()
 }).describe("Defines a courtyard polygon on the PCB");
 expectTypesMatch(true);
-var cad_component = z124.object({
-  type: z124.literal("cad_component"),
-  cad_component_id: z124.string(),
-  pcb_component_id: z124.string(),
-  source_component_id: z124.string(),
+var cad_component = z125.object({
+  type: z125.literal("cad_component"),
+  cad_component_id: z125.string(),
+  pcb_component_id: z125.string(),
+  source_component_id: z125.string(),
   position: point3,
   rotation: point3.optional(),
   size: point3.optional(),
   layer: layer_ref.optional(),
-  subcircuit_id: z124.string().optional(),
+  subcircuit_id: z125.string().optional(),
   // These are all ways to generate/load the 3d model
-  footprinter_string: z124.string().optional(),
-  model_obj_url: z124.string().optional(),
-  model_stl_url: z124.string().optional(),
-  model_3mf_url: z124.string().optional(),
-  model_gltf_url: z124.string().optional(),
-  model_glb_url: z124.string().optional(),
-  model_step_url: z124.string().optional(),
-  model_wrl_url: z124.string().optional(),
-  model_unit_to_mm_scale_factor: z124.number().optional(),
-  model_jscad: z124.any().optional()
+  footprinter_string: z125.string().optional(),
+  model_obj_url: z125.string().optional(),
+  model_stl_url: z125.string().optional(),
+  model_3mf_url: z125.string().optional(),
+  model_gltf_url: z125.string().optional(),
+  model_glb_url: z125.string().optional(),
+  model_step_url: z125.string().optional(),
+  model_wrl_url: z125.string().optional(),
+  model_unit_to_mm_scale_factor: z125.number().optional(),
+  model_jscad: z125.any().optional()
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
-var wave_shape = z125.enum(["sinewave", "square", "triangle", "sawtooth"]);
-var percentage = z125.union([z125.string(), z125.number()]).transform((val) => {
+var wave_shape = z126.enum(["sinewave", "square", "triangle", "sawtooth"]);
+var percentage = z126.union([z126.string(), z126.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -17284,30 +17311,30 @@ var percentage = z125.union([z125.string(), z125.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z125.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z126.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_voltage_source = z125.object({
-  type: z125.literal("simulation_voltage_source"),
+var simulation_dc_voltage_source = z126.object({
+  type: z126.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z125.literal(true).optional().default(true),
-  positive_source_port_id: z125.string().optional(),
-  negative_source_port_id: z125.string().optional(),
-  positive_source_net_id: z125.string().optional(),
-  negative_source_net_id: z125.string().optional(),
+  is_dc_source: z126.literal(true).optional().default(true),
+  positive_source_port_id: z126.string().optional(),
+  negative_source_port_id: z126.string().optional(),
+  positive_source_net_id: z126.string().optional(),
+  negative_source_net_id: z126.string().optional(),
   voltage
 }).describe("Defines a DC voltage source for simulation");
-var simulation_ac_voltage_source = z125.object({
-  type: z125.literal("simulation_voltage_source"),
+var simulation_ac_voltage_source = z126.object({
+  type: z126.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z125.literal(false),
-  terminal1_source_port_id: z125.string().optional(),
-  terminal2_source_port_id: z125.string().optional(),
-  terminal1_source_net_id: z125.string().optional(),
-  terminal2_source_net_id: z125.string().optional(),
+  is_dc_source: z126.literal(false),
+  terminal1_source_port_id: z126.string().optional(),
+  terminal2_source_port_id: z126.string().optional(),
+  terminal1_source_net_id: z126.string().optional(),
+  terminal2_source_net_id: z126.string().optional(),
   voltage: voltage.optional(),
   frequency: frequency.optional(),
   peak_to_peak_voltage: voltage.optional(),
@@ -17315,66 +17342,66 @@ var simulation_ac_voltage_source = z125.object({
   phase: rotation.optional(),
   duty_cycle: percentage.optional()
 }).describe("Defines an AC voltage source for simulation");
-var simulation_voltage_source = z125.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
+var simulation_voltage_source = z126.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
-var experiment_type = z126.union([
-  z126.literal("spice_dc_sweep"),
-  z126.literal("spice_dc_operating_point"),
-  z126.literal("spice_transient_analysis"),
-  z126.literal("spice_ac_analysis")
+var experiment_type = z127.union([
+  z127.literal("spice_dc_sweep"),
+  z127.literal("spice_dc_operating_point"),
+  z127.literal("spice_transient_analysis"),
+  z127.literal("spice_ac_analysis")
 ]);
-var simulation_experiment = z126.object({
-  type: z126.literal("simulation_experiment"),
+var simulation_experiment = z127.object({
+  type: z127.literal("simulation_experiment"),
   simulation_experiment_id: getZodPrefixedIdWithDefault(
     "simulation_experiment"
   ),
-  name: z126.string(),
+  name: z127.string(),
   experiment_type,
   time_per_step: duration_ms.optional(),
   start_time_ms: ms.optional(),
   end_time_ms: ms.optional()
 }).describe("Defines a simulation experiment configuration");
 expectTypesMatch(true);
-var simulation_transient_voltage_graph = z127.object({
-  type: z127.literal("simulation_transient_voltage_graph"),
+var simulation_transient_voltage_graph = z128.object({
+  type: z128.literal("simulation_transient_voltage_graph"),
   simulation_transient_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_voltage_graph"
   ),
-  simulation_experiment_id: z127.string(),
-  timestamps_ms: z127.array(z127.number()).optional(),
-  voltage_levels: z127.array(z127.number()),
-  source_component_id: z127.string().optional(),
-  subcircuit_connectivity_map_key: z127.string().optional(),
+  simulation_experiment_id: z128.string(),
+  timestamps_ms: z128.array(z128.number()).optional(),
+  voltage_levels: z128.array(z128.number()),
+  source_component_id: z128.string().optional(),
+  subcircuit_connectivity_map_key: z128.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z127.string().optional(),
-  color: z127.string().optional()
+  name: z128.string().optional(),
+  color: z128.string().optional()
 }).describe("Stores voltage measurements over time for a simulation");
 expectTypesMatch(true);
-var simulation_switch = z128.object({
-  type: z128.literal("simulation_switch"),
+var simulation_switch = z129.object({
+  type: z129.literal("simulation_switch"),
   simulation_switch_id: getZodPrefixedIdWithDefault("simulation_switch"),
-  source_component_id: z128.string().optional(),
+  source_component_id: z129.string().optional(),
   closes_at: ms.optional(),
   opens_at: ms.optional(),
-  starts_closed: z128.boolean().optional(),
+  starts_closed: z129.boolean().optional(),
   switching_frequency: frequency.optional()
 }).describe("Defines a switch for simulation timing control");
 expectTypesMatch(true);
-var simulation_voltage_probe = z129.object({
-  type: z129.literal("simulation_voltage_probe"),
+var simulation_voltage_probe = z130.object({
+  type: z130.literal("simulation_voltage_probe"),
   simulation_voltage_probe_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_probe"
   ),
-  source_component_id: z129.string().optional(),
-  name: z129.string().optional(),
-  source_port_id: z129.string().optional(),
-  source_net_id: z129.string().optional(),
-  subcircuit_id: z129.string().optional(),
-  color: z129.string().optional()
+  source_component_id: z130.string().optional(),
+  name: z130.string().optional(),
+  source_port_id: z130.string().optional(),
+  source_net_id: z130.string().optional(),
+  subcircuit_id: z130.string().optional(),
+  color: z130.string().optional()
 }).describe(
   "Defines a voltage probe for simulation, connected to a port or a net"
 ).refine(
@@ -17384,18 +17411,18 @@ var simulation_voltage_probe = z129.object({
   }
 );
 expectTypesMatch(true);
-var simulation_unknown_experiment_error = z130.object({
-  type: z130.literal("simulation_unknown_experiment_error"),
+var simulation_unknown_experiment_error = z131.object({
+  type: z131.literal("simulation_unknown_experiment_error"),
   simulation_unknown_experiment_error_id: getZodPrefixedIdWithDefault(
     "simulation_unknown_experiment_error"
   ),
-  error_type: z130.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
-  message: z130.string(),
-  simulation_experiment_id: z130.string().optional(),
-  subcircuit_id: z130.string().optional()
+  error_type: z131.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
+  message: z131.string(),
+  simulation_experiment_id: z131.string().optional(),
+  subcircuit_id: z131.string().optional()
 }).describe("An unknown error occurred during the simulation experiment.");
 expectTypesMatch(true);
-var any_circuit_element = z131.union([
+var any_circuit_element = z132.union([
   source_trace,
   source_port,
   any_source_component,
@@ -17424,6 +17451,7 @@ var any_circuit_element = z131.union([
   source_project_metadata,
   source_trace_not_connected_error,
   source_pin_missing_trace_warning,
+  source_pin_must_be_connected_error,
   unknown_error_finding_part,
   pcb_component,
   pcb_hole,
@@ -17521,7 +17549,7 @@ import { z as z910 } from "zod";
 import "zod";
 import "zod";
 import { z as z1210 } from "zod";
-import { z as z133 } from "zod";
+import { z as z134 } from "zod";
 import { z as z142 } from "zod";
 import { z as z152 } from "zod";
 import { z as z162 } from "zod";
@@ -17696,12 +17724,12 @@ function convertMilToMm(value) {
   }
   return Number(value);
 }
-var lengthInMm = z132.union([z132.string(), z132.number()]).transform((val) => convertMilToMm(val));
-var extendDipDef = (newDefaults) => z132.object({
-  fn: z132.string(),
-  num_pins: z132.number().optional().default(6),
-  wide: z132.boolean().optional(),
-  narrow: z132.boolean().optional(),
+var lengthInMm = z133.union([z133.string(), z133.number()]).transform((val) => convertMilToMm(val));
+var extendDipDef = (newDefaults) => z133.object({
+  fn: z133.string(),
+  num_pins: z133.number().optional().default(6),
+  wide: z133.boolean().optional(),
+  narrow: z133.boolean().optional(),
   w: lengthInMm.optional(),
   p: lengthInMm.default(newDefaults.p ?? "2.54mm"),
   id: lengthInMm.optional(),
@@ -19407,13 +19435,13 @@ var ms013 = (raw_params) => {
     parameters
   };
 };
-var sot723_def = z133.object({
-  fn: z133.string(),
-  num_pins: z133.literal(3).default(3),
-  w: z133.string().default("1.2mm"),
-  h: z133.string().default("1.2mm"),
-  pl: z133.string().default("0.3mm"),
-  pw: z133.string().default("0.32mm")
+var sot723_def = z134.object({
+  fn: z134.string(),
+  num_pins: z134.literal(3).default(3),
+  w: z134.string().default("1.2mm"),
+  h: z134.string().default("1.2mm"),
+  pl: z134.string().default("0.3mm"),
+  pw: z134.string().default("0.32mm")
 });
 var sot723 = (raw_params) => {
   const parameters = sot723_def.parse(raw_params);
@@ -24839,10 +24867,10 @@ var svgPathPoints = normalizeOnY([
 ]);
 var DIP_PIN_HEIGHT = 5.47;
 var heightAboveSurface = 0.5;
-var DipPinLeg = ({ x, y, z: z134 }) => {
+var DipPinLeg = ({ x, y, z: z135 }) => {
   const isRotated = x > 0;
   return /* @__PURE__ */ jsxs(Fragment22, { children: [
-    /* @__PURE__ */ jsx5(Translate, { offset: { x: x + 0.25 / 2, y, z: z134 }, children: /* @__PURE__ */ jsx5(Rotate, { rotation: ["-90deg", 0, "90deg"], children: /* @__PURE__ */ jsx5(ExtrudeLinear, { height: 0.25, children: /* @__PURE__ */ jsx5(
+    /* @__PURE__ */ jsx5(Translate, { offset: { x: x + 0.25 / 2, y, z: z135 }, children: /* @__PURE__ */ jsx5(Rotate, { rotation: ["-90deg", 0, "90deg"], children: /* @__PURE__ */ jsx5(ExtrudeLinear, { height: 0.25, children: /* @__PURE__ */ jsx5(
       Polygon,
       {
         points: svgPathPoints.slice().reverse().map((p) => [p.x, p.y])
@@ -24854,7 +24882,7 @@ var DipPinLeg = ({ x, y, z: z134 }) => {
         offset: {
           x,
           y: y + (isRotated ? 1 : -1),
-          z: z134
+          z: z135
         },
         children: /* @__PURE__ */ jsx5(Rotate, { rotation: ["-90deg", "90deg", isRotated ? "180deg" : "0deg"], children: /* @__PURE__ */ jsx5(ExtrudeLinear, { height: 2, children: /* @__PURE__ */ jsx5(
           Polygon,
@@ -28113,12 +28141,6 @@ var defaultVisibility = {
 var LayerVisibilityContext = createContext3(void 0);
 var LayerVisibilityProvider = ({ children }) => {
   const [visibility, setVisibility] = useState5(defaultVisibility);
-  const toggleLayer = useCallback2((layer) => {
-    setVisibility((prev) => ({
-      ...prev,
-      [layer]: !prev[layer]
-    }));
-  }, []);
   const setLayerVisibility = useCallback2(
     (layer, visible) => {
       setVisibility((prev) => ({
@@ -28134,11 +28156,10 @@ var LayerVisibilityProvider = ({ children }) => {
   const value = useMemo6(
     () => ({
       visibility,
-      toggleLayer,
       setLayerVisibility,
       resetToDefaults
     }),
-    [visibility, toggleLayer, setLayerVisibility, resetToDefaults]
+    [visibility, setLayerVisibility, resetToDefaults]
   );
   return /* @__PURE__ */ jsx8(LayerVisibilityContext.Provider, { value, children });
 };
@@ -28288,7 +28309,7 @@ import * as THREE15 from "three";
 // package.json
 var package_default = {
   name: "@tscircuit/3d-viewer",
-  version: "0.0.439",
+  version: "0.0.441",
   main: "./dist/index.js",
   module: "./dist/index.js",
   type: "module",
@@ -28349,7 +28370,7 @@ var package_default = {
     "@vitejs/plugin-react": "^4.3.4",
     "bun-match-svg": "^0.0.9",
     "bun-types": "1.2.1",
-    "circuit-json": "0.0.317",
+    "circuit-json": "0.0.320",
     "circuit-to-svg": "^0.0.179",
     debug: "^4.4.0",
     "jscad-electronics": "^0.0.89",
@@ -28453,11 +28474,11 @@ var CameraControllerProvider = ({ children, defaultTarget, initialCameraPosition
     new THREE9.Euler(0, 0, 0)
   );
   const baseDistance = useMemo8(() => {
-    const [x, y, z134] = initialCameraPosition ?? [5, -5, 5];
+    const [x, y, z135] = initialCameraPosition ?? [5, -5, 5];
     const distance2 = Math.hypot(
       x - defaultTarget.x,
       y - defaultTarget.y,
-      z134 - defaultTarget.z
+      z135 - defaultTarget.z
     );
     return distance2 > 0 ? distance2 : 5;
   }, [initialCameraPosition, defaultTarget]);
@@ -29842,6 +29863,13 @@ var platedHole = (plated_hole, ctx, options = {}) => {
     return (0, import_colors2.colorize)(colors.copper, (0, import_booleans2.subtract)(finalCopper, drill));
   }
   if (plated_hole.shape === "pill") {
+    const rotationRadians = (plated_hole.ccw_rotation || 0) * Math.PI / 180;
+    const rotateAroundCenter = (geom) => {
+      if (!rotationRadians) return geom;
+      const toOrigin = (0, import_transforms3.translate)([-plated_hole.x, -plated_hole.y, 0], geom);
+      const rotated = (0, import_transforms3.rotate)([0, 0, rotationRadians], toOrigin);
+      return (0, import_transforms3.translate)([plated_hole.x, plated_hole.y, 0], rotated);
+    };
     const shouldRotate = plated_hole.hole_height > plated_hole.hole_width;
     const holeWidth = shouldRotate ? plated_hole.hole_height : plated_hole.hole_width;
     const holeHeight = shouldRotate ? plated_hole.hole_width : plated_hole.hole_height;
@@ -29898,8 +29926,8 @@ var platedHole = (plated_hole, ctx, options = {}) => {
       height: throughDrillHeight
     });
     const drillUnion = (0, import_booleans2.union)(drillRect, drillLeftCap, drillRightCap);
-    const copperSolid = maybeClip(outerBarrel, clipGeom);
-    const drill = drillUnion;
+    const copperSolid = maybeClip(rotateAroundCenter(outerBarrel), clipGeom);
+    const drill = rotateAroundCenter(drillUnion);
     return (0, import_colors2.colorize)(colors.copper, (0, import_booleans2.subtract)(copperSolid, drill));
   }
   if (plated_hole.shape === "pill_hole_with_rect_pad") {
@@ -30170,7 +30198,7 @@ function compose(...matrices) {
 
 // node_modules/transformation-matrix/src/rotate.js
 var { cos, sin, PI } = Math;
-function rotate(angle, cx, cy) {
+function rotate2(angle, cx, cy) {
   const cosAngle = cos(angle);
   const sinAngle = sin(angle);
   const rotationMatrix = {
@@ -30386,7 +30414,7 @@ function createSilkscreenTextGeoms(silkscreenText) {
     const rad = rotationDegrees * Math.PI / 180;
     transforms.push(
       translate4(centerX, centerY),
-      rotate(rad),
+      rotate2(rad),
       translate4(-centerX, -centerY)
     );
   }
@@ -31128,66 +31156,34 @@ var BoardGeomBuilder = class {
         clipGeom: this.boardClipGeom
       });
       this.platedHoleGeoms.push(platedHoleGeom);
-    } else if (ph.shape === "pill" || ph.shape === "pill_hole_with_rect_pad") {
+    } else if (ph.shape === "pill" || ph.shape === "oval") {
       const shouldRotate = ph.hole_height > ph.hole_width;
       const holeWidth = shouldRotate ? ph.hole_height : ph.hole_width;
       const holeHeight = shouldRotate ? ph.hole_width : ph.hole_height;
       const holeRadius = holeHeight / 2;
       const rectLength = Math.abs(holeWidth - holeHeight);
       let pillHole;
-      if (ph.shape === "pill_hole_with_rect_pad") {
-        pillHole = (0, import_booleans6.union)(
-          (0, import_primitives10.cuboid)({
-            center: [
-              ph.x + (ph.hole_offset_x || 0),
-              ph.y + (ph.hole_offset_y || 0),
-              0
-            ],
-            size: shouldRotate ? [holeHeight, rectLength, this.ctx.pcbThickness * 1.5] : [rectLength, holeHeight, this.ctx.pcbThickness * 1.5]
-          }),
-          (0, import_primitives10.cylinder)({
-            center: shouldRotate ? [
-              ph.x + (ph.hole_offset_x || 0),
-              ph.y + (ph.hole_offset_y || 0) - rectLength / 2,
-              0
-            ] : [
-              ph.x + (ph.hole_offset_x || 0) - rectLength / 2,
-              ph.y + (ph.hole_offset_y || 0),
-              0
-            ],
-            radius: holeRadius,
-            height: this.ctx.pcbThickness * 1.5
-          }),
-          (0, import_primitives10.cylinder)({
-            center: shouldRotate ? [
-              ph.x + (ph.hole_offset_x || 0),
-              ph.y + (ph.hole_offset_y || 0) + rectLength / 2,
-              0
-            ] : [
-              ph.x + (ph.hole_offset_x || 0) + rectLength / 2,
-              ph.y + (ph.hole_offset_y || 0),
-              0
-            ],
-            radius: holeRadius,
-            height: this.ctx.pcbThickness * 1.5
-          })
-        );
-      } else {
-        pillHole = (0, import_booleans6.union)(
-          (0, import_primitives10.cuboid)({
-            center: [ph.x, ph.y, 0],
-            size: shouldRotate ? [holeHeight, rectLength, this.ctx.pcbThickness * 1.5] : [rectLength, holeHeight, this.ctx.pcbThickness * 1.5]
-          }),
-          (0, import_primitives10.cylinder)({
-            center: shouldRotate ? [ph.x, ph.y - rectLength / 2, 0] : [ph.x - rectLength / 2, ph.y, 0],
-            radius: holeRadius,
-            height: this.ctx.pcbThickness * 1.5
-          }),
-          (0, import_primitives10.cylinder)({
-            center: shouldRotate ? [ph.x, ph.y + rectLength / 2, 0] : [ph.x + rectLength / 2, ph.y, 0],
-            radius: holeRadius,
-            height: this.ctx.pcbThickness * 1.5
-          })
+      pillHole = (0, import_booleans6.union)(
+        (0, import_primitives10.cuboid)({
+          center: [ph.x, ph.y, 0],
+          size: shouldRotate ? [holeHeight, rectLength, this.ctx.pcbThickness * 1.5] : [rectLength, holeHeight, this.ctx.pcbThickness * 1.5]
+        }),
+        (0, import_primitives10.cylinder)({
+          center: shouldRotate ? [ph.x, ph.y - rectLength / 2, 0] : [ph.x - rectLength / 2, ph.y, 0],
+          radius: holeRadius,
+          height: this.ctx.pcbThickness * 1.5
+        }),
+        (0, import_primitives10.cylinder)({
+          center: shouldRotate ? [ph.x, ph.y + rectLength / 2, 0] : [ph.x + rectLength / 2, ph.y, 0],
+          radius: holeRadius,
+          height: this.ctx.pcbThickness * 1.5
+        })
+      );
+      if (ph.ccw_rotation) {
+        const rotationRadians = ph.ccw_rotation * Math.PI / 180;
+        pillHole = (0, import_transforms8.translate)(
+          [ph.x, ph.y, 0],
+          (0, import_transforms8.rotateZ)(rotationRadians, (0, import_transforms8.translate)([-ph.x, -ph.y, 0], pillHole))
         );
       }
       if (!opts.dontCutBoard) {
@@ -31200,6 +31196,49 @@ var BoardGeomBuilder = class {
         clipGeom: this.boardClipGeom
       });
       this.platedHoleGeoms.push(platedHoleGeom);
+    } else if (ph.shape === "pill_hole_with_rect_pad") {
+      const shouldRotate = ph.hole_height > ph.hole_width;
+      const holeWidth = shouldRotate ? ph.hole_height : ph.hole_width;
+      const holeHeight = shouldRotate ? ph.hole_width : ph.hole_height;
+      const holeRadius = holeHeight / 2;
+      const rectLength = Math.abs(holeWidth - holeHeight);
+      let pillHole;
+      pillHole = (0, import_booleans6.union)(
+        (0, import_primitives10.cuboid)({
+          center: [
+            ph.x + (ph.hole_offset_x || 0),
+            ph.y + (ph.hole_offset_y || 0),
+            0
+          ],
+          size: shouldRotate ? [holeHeight, rectLength, this.ctx.pcbThickness * 1.5] : [rectLength, holeHeight, this.ctx.pcbThickness * 1.5]
+        }),
+        (0, import_primitives10.cylinder)({
+          center: shouldRotate ? [
+            ph.x + (ph.hole_offset_x || 0),
+            ph.y + (ph.hole_offset_y || 0) - rectLength / 2,
+            0
+          ] : [
+            ph.x + (ph.hole_offset_x || 0) - rectLength / 2,
+            ph.y + (ph.hole_offset_y || 0),
+            0
+          ],
+          radius: holeRadius,
+          height: this.ctx.pcbThickness * 1.5
+        }),
+        (0, import_primitives10.cylinder)({
+          center: shouldRotate ? [
+            ph.x + (ph.hole_offset_x || 0),
+            ph.y + (ph.hole_offset_y || 0) + rectLength / 2,
+            0
+          ] : [
+            ph.x + (ph.hole_offset_x || 0) + rectLength / 2,
+            ph.y + (ph.hole_offset_y || 0),
+            0
+          ],
+          radius: holeRadius,
+          height: this.ctx.pcbThickness * 1.5
+        })
+      );
     } else if (ph.shape === "hole_with_polygon_pad") {
       const padOutline = ph.pad_outline;
       if (!Array.isArray(padOutline) || padOutline.length < 3) {
@@ -32435,7 +32474,7 @@ function createSilkscreenTextureForLayer({
       const rad = rotationDeg * Math.PI / 180;
       transformMatrices.push(
         translate4(textCenterX, textCenterY),
-        rotate(rad),
+        rotate2(rad),
         translate4(-textCenterX, -textCenterY)
       );
     }
@@ -34508,23 +34547,26 @@ import { useEffect as useEffect25, useMemo as useMemo21, useRef as useRef11, use
 var hotkeyRegistry = /* @__PURE__ */ new Map();
 var subscribers = /* @__PURE__ */ new Set();
 var isListenerAttached = false;
-var matchesKey = (eventKey, targetKey) => {
-  if (!eventKey || !targetKey) return false;
-  return eventKey.toLowerCase() === targetKey.toLowerCase();
-};
-var matchesModifiers = (event, modifiers) => {
-  if (!modifiers || modifiers.length === 0) {
-    return !event.ctrlKey && !event.metaKey && !event.shiftKey && !event.altKey;
-  }
-  const hasCtrl = modifiers.includes("Ctrl");
-  const hasCmd = modifiers.includes("Cmd");
-  const hasShift = modifiers.includes("Shift");
-  const hasAlt = modifiers.includes("Alt");
-  if (hasCtrl && !event.ctrlKey) return false;
-  if (hasCmd && !event.metaKey) return false;
-  if (hasShift && !event.shiftKey) return false;
-  if (hasAlt && !event.altKey) return false;
-  return true;
+var parseShortcut = (shortcut) => {
+  const parts = shortcut.toLowerCase().split("+");
+  const key = parts[parts.length - 1];
+  const modifierParts = parts.slice(0, -1);
+  return {
+    key,
+    ctrl: modifierParts.includes("ctrl"),
+    cmd: modifierParts.includes("cmd"),
+    shift: modifierParts.includes("shift"),
+    alt: modifierParts.includes("alt")
+  };
+};
+var matchesShortcut = (event, shortcut) => {
+  const parsed = parseShortcut(shortcut);
+  const keyMatches = event.key.toLowerCase() === parsed.key;
+  const ctrlMatches = parsed.ctrl === event.ctrlKey;
+  const cmdMatches = parsed.cmd === event.metaKey;
+  const shiftMatches = parsed.shift === event.shiftKey;
+  const altMatches = parsed.alt === event.altKey;
+  return keyMatches && ctrlMatches && cmdMatches && shiftMatches && altMatches;
 };
 var isEditableTarget = (target) => {
   if (!target || typeof target !== "object") return false;
@@ -34541,7 +34583,7 @@ var handleKeydown = (event) => {
     return;
   }
   hotkeyRegistry.forEach((entry) => {
-    if (matchesKey(event.key, entry.key) && matchesModifiers(event, entry.modifiers)) {
+    if (matchesShortcut(event, entry.shortcut)) {
       event.preventDefault();
       entry.invoke();
     }
@@ -34579,11 +34621,10 @@ var useRegisteredHotkey = (id, handler, metadata) => {
   handlerRef.current = handler;
   const normalizedMetadata = useMemo21(
     () => ({
-      key: metadata.key,
-      description: metadata.description,
-      modifiers: metadata.modifiers
+      shortcut: metadata.shortcut,
+      description: metadata.description
     }),
-    [metadata.key, metadata.description, metadata.modifiers]
+    [metadata.shortcut, metadata.description]
   );
   useEffect25(() => {
     const registration = {
@@ -40065,7 +40106,7 @@ var iconContainerStyles = {
   flexShrink: 0
 };
 var AppearanceMenu = () => {
-  const { visibility, toggleLayer } = useLayerVisibility();
+  const { visibility, setLayerVisibility } = useLayerVisibility();
   const [appearanceSubOpen, setAppearanceSubOpen] = useState33(false);
   const [hoveredItem, setHoveredItem] = useState33(null);
   return /* @__PURE__ */ jsxs7(Fragment9, { children: [
@@ -40116,7 +40157,7 @@ var AppearanceMenu = () => {
                 onSelect: (e) => e.preventDefault(),
                 onPointerDown: (e) => {
                   e.preventDefault();
-                  toggleLayer("boardBody");
+                  setLayerVisibility("boardBody", !visibility.boardBody);
                 },
                 onMouseEnter: () => setHoveredItem("boardBody"),
                 onMouseLeave: () => setHoveredItem(null),
@@ -40137,7 +40178,7 @@ var AppearanceMenu = () => {
                 onSelect: (e) => e.preventDefault(),
                 onPointerDown: (e) => {
                   e.preventDefault();
-                  toggleLayer("topCopper");
+                  setLayerVisibility("topCopper", !visibility.topCopper);
                 },
                 onMouseEnter: () => setHoveredItem("topCopper"),
                 onMouseLeave: () => setHoveredItem(null),
@@ -40158,7 +40199,7 @@ var AppearanceMenu = () => {
                 onSelect: (e) => e.preventDefault(),
                 onPointerDown: (e) => {
                   e.preventDefault();
-                  toggleLayer("bottomCopper");
+                  setLayerVisibility("bottomCopper", !visibility.bottomCopper);
                 },
                 onMouseEnter: () => setHoveredItem("bottomCopper"),
                 onMouseLeave: () => setHoveredItem(null),
@@ -40179,7 +40220,7 @@ var AppearanceMenu = () => {
                 onSelect: (e) => e.preventDefault(),
                 onPointerDown: (e) => {
                   e.preventDefault();
-                  toggleLayer("topSilkscreen");
+                  setLayerVisibility("topSilkscreen", !visibility.topSilkscreen);
                 },
                 onMouseEnter: () => setHoveredItem("topSilkscreen"),
                 onMouseLeave: () => setHoveredItem(null),
@@ -40200,7 +40241,10 @@ var AppearanceMenu = () => {
                 onSelect: (e) => e.preventDefault(),
                 onPointerDown: (e) => {
                   e.preventDefault();
-                  toggleLayer("bottomSilkscreen");
+                  setLayerVisibility(
+                    "bottomSilkscreen",
+                    !visibility.bottomSilkscreen
+                  );
                 },
                 onMouseEnter: () => setHoveredItem("bottomSilkscreen"),
                 onMouseLeave: () => setHoveredItem(null),
@@ -40221,7 +40265,7 @@ var AppearanceMenu = () => {
                 onSelect: (e) => e.preventDefault(),
                 onPointerDown: (e) => {
                   e.preventDefault();
-                  toggleLayer("smtModels");
+                  setLayerVisibility("smtModels", !visibility.smtModels);
                 },
                 onMouseEnter: () => setHoveredItem("smtModels"),
                 onMouseLeave: () => setHoveredItem(null),
@@ -40584,7 +40628,7 @@ var ContextMenu = ({
 
 // src/components/KeyboardShortcutsDialog.tsx
 import { useEffect as useEffect41, useMemo as useMemo27, useRef as useRef25, useState as useState35 } from "react";
-import { Fragment as Fragment10, jsx as jsx35, jsxs as jsxs9 } from "react/jsx-runtime";
+import { jsx as jsx35, jsxs as jsxs9 } from "react/jsx-runtime";
 var KeyboardShortcutsDialog = ({
   open,
   onClose
@@ -40616,7 +40660,7 @@ var KeyboardShortcutsDialog = ({
       return hotkeys;
     }
     return hotkeys.filter((hotkey) => {
-      const haystack = `${hotkey.key} ${hotkey.description}`;
+      const haystack = `${hotkey.shortcut} ${hotkey.description}`;
       return haystack.toLowerCase().includes(normalizedQuery);
     });
   }, [hotkeys, query]);
@@ -40751,12 +40795,10 @@ var KeyboardShortcutsDialog = ({
                               minWidth: 36,
                               padding: "4px 8px",
                               fontFamily: "monospace",
-                              fontSize: "0.95rem"
+                              fontSize: "0.95rem",
+                              textTransform: "capitalize"
                             },
-                            children: hotkey.modifiers?.length ? /* @__PURE__ */ jsxs9(Fragment10, { children: [
-                              hotkey.modifiers.map((mod) => `${mod}+`).join(""),
-                              hotkey.key.toUpperCase()
-                            ] }) : hotkey.key.toUpperCase()
+                            children: hotkey.shortcut
                           }
                         ) }),
                         /* @__PURE__ */ jsx35("td", { style: { padding: "12px 24px" }, children: hotkey.description })
@@ -40790,7 +40832,7 @@ var CadViewerInner = (props) => {
   });
   const [cameraPreset, setCameraPreset] = useState36("Custom");
   const { cameraType, setCameraType } = useCameraController();
-  const { visibility, toggleLayer } = useLayerVisibility();
+  const { visibility, setLayerVisibility } = useLayerVisibility();
   const cameraControllerRef = useRef26(null);
   const externalCameraControllerReady = props.onCameraControllerReady;
   const {
@@ -40849,9 +40891,8 @@ var CadViewerInner = (props) => {
       setIsKeyboardShortcutsDialogOpen(true);
     },
     {
-      key: "?",
-      description: "Open keyboard shortcuts",
-      modifiers: ["Shift"]
+      shortcut: "shift+?",
+      description: "Open keyboard shortcuts"
     }
   );
   useEffect42(() => {