@tscircuit/3d-viewer 0.0.44 → 0.0.46

package/dist/index.js

@@ -313,28 +313,27 @@ var createBoardGeomFromSoup = (soup) => {
   }
   for (const { route: mixedRoute } of traces) {
     if (mixedRoute.length < 2) continue;
-    const subRoutes = mixedRoute.reduce(
-      (c, p) => {
-        const lastLayer = c.current?.[c.current.length - 1]?.layer;
-        if (p.route_type === "via" || p.route_type === "wire" && p.layer !== lastLayer) {
-          if (c.current.length > 2) {
-            c.allPrev.push(c.current);
-          }
-          c.current = p.route_type === "wire" ? [p] : [];
-          return c;
-        }
-        c.current.push(p);
-        return c;
-      },
-      {
-        current: [],
-        allPrev: []
+    const routeSegments = [];
+    let currentSegment = [mixedRoute[0]];
+    let currentLayer = mixedRoute[0].route_type === "wire" ? mixedRoute[0].layer : "top";
+    for (let i = 1; i < mixedRoute.length; i++) {
+      const point = mixedRoute[i];
+      if (point.route_type === "via") {
+        routeSegments.push(currentSegment);
+        currentSegment = [point];
+      } else if (point.route_type === "wire" && point.layer !== currentLayer) {
+        routeSegments.push(currentSegment);
+        currentLayer = point.layer;
+        currentSegment = [point];
+      } else {
+        currentSegment.push(point);
       }
-    );
-    for (const route of subRoutes.allPrev.concat([subRoutes.current])) {
+    }
+    routeSegments.push(currentSegment);
+    for (const route of routeSegments) {
+      if (route.length < 2) continue;
       const linePath = (0, import_primitives3.line)(route.map((p) => [p.x, p.y]));
-      const layer = route[0].route_type === "wire" ? route[0].layer : "top";
-      const layerSign = layer === "top" ? 1 : -1;
+      const layerSign = route[0].route_type === "via" ? route[0].to_layer === "top" ? 1 : -1 : route[0].layer === "top" ? 1 : -1;
       let traceGeom = (0, import_transforms2.translate)(
         [0, 0, layerSign * 1.2 / 2],
         (0, import_extrusions2.extrudeLinear)(
@@ -342,28 +341,21 @@ var createBoardGeomFromSoup = (soup) => {
           (0, import_expansions.expand)({ delta: 0.1, corners: "edge" }, linePath)
         )
       );
-      for (const via of pcb_vias) {
-        traceGeom = (0, import_booleans2.subtract)(
-          traceGeom,
-          (0, import_primitives3.cylinder)({
-            center: [via.x, via.y, 0],
-            radius: via.outer_diameter / 2,
-            height: 5
-          })
-        );
-      }
-      for (const ph of plated_holes) {
-        if (ph.shape === "circle") {
-          traceGeom = (0, import_booleans2.subtract)(
-            traceGeom,
-            (0, import_primitives3.cylinder)({
-              center: [ph.x, ph.y, 0],
-              radius: ph.outer_diameter / 2,
-              height: 5
-            })
-          );
-        }
-      }
+      const viaSubtractions = pcb_vias.map(
+        (via) => (0, import_primitives3.cylinder)({
+          center: [via.x, via.y, 0],
+          radius: via.outer_diameter / 2,
+          height: 5
+        })
+      );
+      const holeSubtractions = plated_holes.filter((ph) => ph.shape === "circle").map(
+        (ph) => (0, import_primitives3.cylinder)({
+          center: [ph.x, ph.y, 0],
+          radius: ph.outer_diameter / 2,
+          height: 5
+        })
+      );
+      traceGeom = (0, import_booleans2.subtract)(traceGeom, ...viaSubtractions, ...holeSubtractions);
       traceGeom = (0, import_colors2.colorize)(colors.fr4GreenSolderWithMask, traceGeom);
       traceGeoms.push(traceGeom);
     }
@@ -459,7 +451,7 @@ var import_fiber3 = require("@react-three/fiber");
 // package.json
 var package_default = {
   name: "@tscircuit/3d-viewer",
-  version: "0.0.43",
+  version: "0.0.45",
   main: "./dist/index.js",
   files: [
     "dist"
@@ -615,6 +607,7 @@ var CubeWithLabeledSides = ({}) => {
 };
 
 // src/CadViewerContainer.tsx
+var import_drei3 = require("@react-three/drei");
 var import_jsx_runtime3 = require("react/jsx-runtime");
 var RotationTracker = () => {
   (0, import_fiber3.useFrame)(({ camera }) => {
@@ -622,7 +615,10 @@ var RotationTracker = () => {
   });
   return /* @__PURE__ */ (0, import_jsx_runtime3.jsx)(import_jsx_runtime3.Fragment, {});
 };
-var CadViewerContainer = ({ children }) => {
+var CadViewerContainer = ({
+  children,
+  hoveredComponent
+}) => {
   return /* @__PURE__ */ (0, import_jsx_runtime3.jsxs)("div", { style: { position: "relative", width: "100%", height: "100%" }, children: [
     /* @__PURE__ */ (0, import_jsx_runtime3.jsx)(
       "div",
@@ -639,8 +635,6 @@ var CadViewerContainer = ({ children }) => {
           {
             camera: {
               up: [0, 0, 1],
-              // rotation: [-Math.PI / 2, 0, 0],
-              // lookAt: new THREE.Vector3(0, 0, 0),
               position: [1, 1, 1]
             },
             style: { zIndex: 10 },
@@ -678,7 +672,22 @@ var CadViewerContainer = ({ children }) => {
               sectionSize: 10
             }
           ),
-          children
+          children,
+          hoveredComponent.id && hoveredComponent.mousePosition && /* @__PURE__ */ (0, import_jsx_runtime3.jsx)(
+            import_drei3.Html,
+            {
+              position: hoveredComponent.mousePosition,
+              style: {
+                fontFamily: "sans-serif",
+                transform: "translate3d(50%, 50%, 0)",
+                backgroundColor: "white",
+                padding: "5px",
+                borderRadius: "3px",
+                pointerEvents: "none"
+              },
+              children: hoveredComponent.name
+            }
+          )
         ]
       }
     ),
@@ -692,9 +701,6 @@ var CadViewerContainer = ({ children }) => {
           fontFamily: "sans-serif",
           color: "white",
           WebkitTextStroke: "0.5px rgba(0, 0, 0, 0.5)",
-          // color: "rgba(255, 255, 255, 0.75)",
-          // textShadow:
-          //   "0px 0px 1px rgba(0, 0, 0, 0.5), 0px 0px 2px rgba(0, 0, 0, 0.5)",
           fontSize: 11
         },
         children: [
@@ -707,8 +713,6 @@ var CadViewerContainer = ({ children }) => {
 };
 
 // src/ContainerWithTooltip.tsx
-var import_drei3 = require("@react-three/drei");
-var import_fiber4 = require("@react-three/fiber");
 var import_react5 = require("react");
 var THREE2 = __toESM(require("three"));
 var import_jsx_runtime4 = require("react/jsx-runtime");
@@ -720,63 +724,39 @@ var ContainerWithTooltip = ({
   name,
   position
 }) => {
-  const [mousePosition, setMousePosition] = (0, import_react5.useState)([
-    0,
-    0,
-    0
-  ]);
-  const { camera } = (0, import_fiber4.useThree)();
-  const mouseRef = (0, import_react5.useRef)(new THREE2.Vector2());
-  (0, import_fiber4.useFrame)(() => {
-    if (isHovered) {
-      const vector = new THREE2.Vector3(
-        mouseRef.current.x,
-        mouseRef.current.y,
-        0.5
-      );
-      vector.unproject(camera);
-      setMousePosition([vector.x, vector.y, vector.z]);
-    }
-  });
-  const groupProps = {
-    onPointerEnter: (e) => {
-      e.stopPropagation();
-      mouseRef.current.set(
-        e.clientX / window.innerWidth * 2 - 1,
-        -(e.clientY / window.innerHeight) * 2 + 1
-      );
-      onHover(componentId);
-    },
-    onPointerMove: (e) => {
+  const lastValidPointRef = (0, import_react5.useRef)(null);
+  const handlePointerEnter = (0, import_react5.useCallback)(
+    (e) => {
       e.stopPropagation();
-      mouseRef.current.set(
-        e.clientX / window.innerWidth * 2 - 1,
-        -(e.clientY / window.innerHeight) * 2 + 1
-      );
+      try {
+        const point = e.point || (e.intersections && e.intersections.length > 0 ? e.intersections[0].point : null) || (position ? new THREE2.Vector3(...position) : null);
+        if (point) {
+          lastValidPointRef.current = point;
+          onHover(componentId, name, [point.x, point.y, point.z]);
+        } else {
+          onHover(componentId, name);
+        }
+      } catch (error) {
+        console.warn("Hover event error:", error);
+        onHover(componentId, name);
+      }
     },
-    onPointerLeave: (e) => {
+    [componentId, name, onHover, position]
+  );
+  const handlePointerLeave = (0, import_react5.useCallback)(
+    (e) => {
       e.stopPropagation();
+      lastValidPointRef.current = null;
       onHover(null);
-    }
+    },
+    [onHover]
+  );
+  const groupProps = {
+    onPointerEnter: handlePointerEnter,
+    onPointerMove: handlePointerEnter,
+    onPointerLeave: handlePointerLeave
   };
-  return /* @__PURE__ */ (0, import_jsx_runtime4.jsxs)("group", { ...groupProps, children: [
-    children,
-    isHovered && /* @__PURE__ */ (0, import_jsx_runtime4.jsx)(
-      import_drei3.Html,
-      {
-        position: mousePosition,
-        style: {
-          fontFamily: "sans-serif",
-          transform: "translate3d(50%, 50%, 0)",
-          backgroundColor: "white",
-          padding: "5px",
-          borderRadius: "3px",
-          pointerEvents: "none"
-        },
-        children: name
-      }
-    )
-  ] });
+  return /* @__PURE__ */ (0, import_jsx_runtime4.jsx)("group", { ...groupProps, children });
 };
 var ContainerWithTooltip_default = ContainerWithTooltip;
 
@@ -1005,7 +985,11 @@ var tuple = (...args) => args;
 // src/CadViewer.tsx
 var import_jsx_runtime8 = require("react/jsx-runtime");
 var CadViewer = ({ soup, children }) => {
-  const [hoveredComponent, setHoveredComponent] = (0, import_react9.useState)(null);
+  const [hoveredComponent, setHoveredComponent] = (0, import_react9.useState)({
+    id: null,
+    name: null,
+    mousePosition: null
+  });
   soup ??= useConvertChildrenToSoup(children, soup);
   if (!soup) return null;
   const boardGeom = (0, import_react9.useMemo)(() => {
@@ -1014,7 +998,14 @@ var CadViewer = ({ soup, children }) => {
   }, [soup]);
   const { stls, loading } = useStlsFromGeom(boardGeom);
   const cad_components = (0, import_soup_util2.su)(soup).cad_component.list();
-  return /* @__PURE__ */ (0, import_jsx_runtime8.jsxs)(CadViewerContainer, { children: [
+  const handleHover = (componentId, componentName, mousePosition) => {
+    setHoveredComponent({
+      id: componentId,
+      name: componentName || null,
+      mousePosition: mousePosition || null
+    });
+  };
+  return /* @__PURE__ */ (0, import_jsx_runtime8.jsxs)(CadViewerContainer, { hoveredComponent, children: [
     stls.map(({ stlUrl, color }, index) => /* @__PURE__ */ (0, import_jsx_runtime8.jsx)(
       STLModel,
       {
@@ -1047,8 +1038,8 @@ var CadViewer = ({ soup, children }) => {
             rotation: rotationOffset,
             componentId: cad_component.cad_component_id,
             name: componentName || cad_component.cad_component_id,
-            onHover: setHoveredComponent,
-            isHovered: hoveredComponent === cad_component.cad_component_id
+            onHover: handleHover,
+            isHovered: hoveredComponent.id === cad_component.cad_component_id
           },
           cad_component.cad_component_id
         );
@@ -1061,8 +1052,8 @@ var CadViewer = ({ soup, children }) => {
             rotationOffset,
             componentId: cad_component.cad_component_id,
             name: componentName || cad_component.cad_component_id,
-            onHover: setHoveredComponent,
-            isHovered: hoveredComponent === cad_component.cad_component_id
+            onHover: handleHover,
+            isHovered: hoveredComponent.id === cad_component.cad_component_id
           },
           cad_component.cad_component_id
         );
@@ -1080,8 +1071,8 @@ var CadViewer = ({ soup, children }) => {
             footprint: cad_component.footprinter_string,
             componentId: cad_component.cad_component_id,
             name: componentName || cad_component.cad_component_id,
-            onHover: setHoveredComponent,
-            isHovered: hoveredComponent === cad_component.cad_component_id
+            onHover: handleHover,
+            isHovered: hoveredComponent.id === cad_component.cad_component_id
           }
         );
       }

package/dist/index.js.map

@@ -1 +1 @@
-{"version":3,"sources":["../src/index.tsx","../src/hooks/use-convert-children-to-soup.ts","../src/CadViewer.tsx","../src/soup-to-3d/index.ts","../src/geoms/plated-hole.ts","../src/geoms/constants.ts","../src/geoms/create-board-with-outline.ts","../src/hooks/use-stls-from-geom.ts","../src/three-components/STLModel.tsx","../src/CadViewerContainer.tsx","../package.json","../src/three-components/cube-with-labeled-sides.tsx","../src/ContainerWithTooltip.tsx","../src/hooks/use-global-obj-loader.ts","../src/three-components/MixedStlModel.tsx","../src/three-components/JscadModel.tsx","../src/three-components/FootprinterModel.tsx","../src/utils/tuple.ts"],"sourcesContent":["export { CadViewer } from \"./CadViewer\"\n","import { Circuit } from \"@tscircuit/core\"\nimport { useMemo } from \"react\"\nimport type { AnyCircuitElement } from \"circuit-json\"\n\nexport const useConvertChildrenToSoup = (\n  children?: any,\n  defaultSoup?: AnyCircuitElement[],\n): AnyCircuitElement[] => {\n  return useMemo(() => {\n    if (!children) return\n    const circuit = new Circuit()\n    circuit.add(children)\n    circuit.render()\n    return circuit.getCircuitJson() as any\n  }, [children])\n}\n","import type { AnySoupElement } from \"@tscircuit/soup\"\nimport { useConvertChildrenToSoup } from \"./hooks/use-convert-children-to-soup\"\nimport { su } from \"@tscircuit/soup-util\"\nimport { useMemo, useState } from \"react\"\nimport { createBoardGeomFromSoup } from \"./soup-to-3d\"\nimport { useStlsFromGeom } from \"./hooks/use-stls-from-geom\"\nimport { STLModel } from \"./three-components/STLModel\"\nimport { CadViewerContainer } from \"./CadViewerContainer\"\nimport { MixedStlModel } from \"./three-components/MixedStlModel\"\nimport { Euler } from \"three\"\nimport { JscadModel } from \"./three-components/JscadModel\"\nimport { Footprinter3d } from \"jscad-electronics\"\nimport { FootprinterModel } from \"./three-components/FootprinterModel\"\nimport { tuple } from \"./utils/tuple\"\n\ninterface Props {\n  soup?: AnySoupElement[]\n  children?: any\n}\n\nexport const CadViewer = ({ soup, children }: Props) => {\n  const [hoveredComponent, setHoveredComponent] = useState<string | null>(null)\n  soup ??= useConvertChildrenToSoup(children, soup) as any\n\n  if (!soup) return null\n\n  const boardGeom = useMemo(() => {\n    if (!soup.some((e) => e.type === \"pcb_board\")) return null\n    return createBoardGeomFromSoup(soup)\n  }, [soup])\n\n  const { stls, loading } = useStlsFromGeom(boardGeom)\n\n  const cad_components = su(soup).cad_component.list()\n\n  // TODO canvas/camera etc.\n  return (\n    <CadViewerContainer>\n      {stls.map(({ stlUrl, color }, index) => (\n        <STLModel\n          key={stlUrl}\n          stlUrl={stlUrl}\n          color={color}\n          opacity={index === 0 ? 0.95 : 1}\n        />\n      ))}\n      {cad_components.map((cad_component) => {\n        const componentName = su(soup).source_component.getUsing({\n          source_component_id: cad_component.source_component_id,\n        })?.name\n        const url = cad_component.model_obj_url ?? cad_component.model_stl_url\n        const rotationOffset = cad_component.rotation\n          ? tuple(\n              (cad_component.rotation.x * Math.PI) / 180,\n              (cad_component.rotation.y * Math.PI) / 180,\n              (cad_component.rotation.z * Math.PI) / 180,\n            )\n          : undefined\n\n        if (url) {\n          return (\n            <MixedStlModel\n              key={cad_component.cad_component_id}\n              url={url}\n              position={\n                cad_component.position\n                  ? [\n                      cad_component.position.x,\n                      cad_component.position.y,\n                      cad_component.position.z,\n                    ]\n                  : undefined\n              }\n              rotation={rotationOffset}\n              componentId={cad_component.cad_component_id}\n              name={componentName || cad_component.cad_component_id}\n              onHover={setHoveredComponent}\n              isHovered={hoveredComponent === cad_component.cad_component_id}\n            />\n          )\n        }\n\n        if (cad_component.model_jscad) {\n          return (\n            <JscadModel\n              key={cad_component.cad_component_id}\n              jscadPlan={cad_component.model_jscad as any}\n              rotationOffset={rotationOffset}\n              componentId={cad_component.cad_component_id}\n              name={componentName || cad_component.cad_component_id}\n              onHover={setHoveredComponent}\n              isHovered={hoveredComponent === cad_component.cad_component_id}\n            />\n          )\n        }\n\n        if (cad_component.footprinter_string) {\n          return (\n            <FootprinterModel\n              positionOffset={\n                cad_component.position\n                  ? [\n                      cad_component.position.x,\n                      cad_component.position.y,\n                      cad_component.position.z,\n                    ]\n                  : undefined\n              }\n              rotationOffset={rotationOffset}\n              footprint={cad_component.footprinter_string}\n              componentId={cad_component.cad_component_id}\n              name={componentName || cad_component.cad_component_id}\n              onHover={setHoveredComponent}\n              isHovered={hoveredComponent === cad_component.cad_component_id}\n            />\n          )\n        }\n      })}\n    </CadViewerContainer>\n  )\n}\n","import type { Geom3 } from \"@jscad/modeling/src/geometries/types\"\nimport type { AnySoupElement, PCBPlatedHole } from \"@tscircuit/soup\"\nimport { su } from \"@tscircuit/soup-util\"\nimport { translate } from \"@jscad/modeling/src/operations/transforms\"\nimport { cuboid, cylinder, line } from \"@jscad/modeling/src/primitives\"\nimport { colorize } from \"@jscad/modeling/src/colors\"\nimport { subtract, union } from \"@jscad/modeling/src/operations/booleans\"\nimport { platedHole } from \"../geoms/plated-hole\"\nimport { M, colors } from \"../geoms/constants\"\nimport { extrudeLinear } from \"@jscad/modeling/src/operations/extrusions\"\nimport { expand } from \"@jscad/modeling/src/operations/expansions\"\nimport { createBoardWithOutline } from \"src/geoms/create-board-with-outline\"\n\nexport const createBoardGeomFromSoup = (soup: AnySoupElement[]): Geom3[] => {\n  const board = su(soup).pcb_board.list()[0]\n  if (!board) {\n    throw new Error(\"No pcb_board found\")\n  }\n  const plated_holes = su(soup).pcb_plated_hole.list()\n  const holes = su(soup).pcb_hole.list()\n  const pads = su(soup).pcb_smtpad.list()\n  const traces = su(soup).pcb_trace.list()\n  const pcb_vias = su(soup).pcb_via.list()\n\n  // PCB Board\n  let boardGeom: Geom3\n  if (board.outline && board.outline.length > 0)\n    boardGeom = createBoardWithOutline(board.outline, 1.2)\n  else boardGeom = cuboid({ size: [board.width, board.height, 1.2] })\n\n  const platedHoleGeoms: Geom3[] = []\n  const holeGeoms: Geom3[] = []\n  const padGeoms: Geom3[] = []\n  const traceGeoms: Geom3[] = []\n  const ctx = {\n    pcbThickness: 1.2,\n  }\n\n  const addPlatedHole = (plated_hole: PCBPlatedHole) => {\n    if (plated_hole.shape === \"circle\") {\n      const cyGeom = cylinder({\n        center: [plated_hole.x, plated_hole.y, 0],\n        radius: plated_hole.hole_diameter / 2 + M,\n      })\n\n      boardGeom = subtract(boardGeom, cyGeom)\n\n      const platedHoleGeom = platedHole(plated_hole, ctx)\n      platedHoleGeoms.push(platedHoleGeom)\n    } else if (plated_hole.shape === \"pill\") {\n      const shouldRotate = plated_hole.hole_height! > plated_hole.hole_width!\n\n      const holeWidth = shouldRotate\n        ? plated_hole.hole_height!\n        : plated_hole.hole_width!\n      const holeHeight = shouldRotate\n        ? plated_hole.hole_width!\n        : plated_hole.hole_height!\n\n      const holeRadius = holeHeight / 2\n      const rectLength = Math.abs(holeWidth - holeHeight)\n\n      const pillHole = union(\n        cuboid({\n          center: [plated_hole.x, plated_hole.y, 0],\n          size: shouldRotate\n            ? [holeHeight, rectLength, 1.5]\n            : [rectLength, holeHeight, 1.5],\n        }),\n        cylinder({\n          center: shouldRotate\n            ? [plated_hole.x, plated_hole.y - rectLength / 2, 0]\n            : [plated_hole.x - rectLength / 2, plated_hole.y, 0],\n          radius: holeRadius,\n          height: 1.5,\n        }),\n        cylinder({\n          center: shouldRotate\n            ? [plated_hole.x, plated_hole.y + rectLength / 2, 0]\n            : [plated_hole.x + rectLength / 2, plated_hole.y, 0],\n          radius: holeRadius,\n          height: 1.5,\n        }),\n      )\n      boardGeom = subtract(boardGeom, pillHole)\n\n      const platedHoleGeom = platedHole(plated_hole, ctx)\n      platedHoleGeoms.push(platedHoleGeom)\n    }\n  }\n\n  for (const plated_hole of plated_holes) {\n    addPlatedHole(plated_hole)\n  }\n\n  for (const hole of holes) {\n    // @ts-expect-error\n    if (hole.hole_shape === \"round\" || hole.hole_shape === \"circle\") {\n      const cyGeom = cylinder({\n        center: [hole.x, hole.y, 0],\n        radius: hole.hole_diameter / 2 + M,\n      })\n      boardGeom = subtract(boardGeom, cyGeom)\n    }\n  }\n\n  for (const pad of pads) {\n    const layerSign = pad.layer === \"bottom\" ? -1 : 1\n    if (pad.shape === \"rect\") {\n      const padGeom = colorize(\n        colors.copper,\n        cuboid({\n          center: [pad.x, pad.y, (layerSign * 1.2) / 2 + layerSign * M],\n          size: [pad.width, pad.height, M],\n        }),\n      )\n      padGeoms.push(padGeom)\n    } else if (pad.shape === \"circle\") {\n      const padGeom = colorize(\n        colors.copper,\n        cylinder({\n          center: [pad.x, pad.y, (layerSign * 1.2) / 2 + layerSign * M],\n          radius: pad.radius,\n          height: M,\n        }),\n      )\n      padGeoms.push(padGeom)\n    }\n  }\n\n  for (const { route: mixedRoute } of traces) {\n    if (mixedRoute.length < 2) continue\n    const subRoutes = mixedRoute.reduce(\n      (c, p) => {\n        // @ts-ignore\n        const lastLayer = c.current?.[c.current.length - 1]?.layer\n        if (\n          p.route_type === \"via\" ||\n          (p.route_type === \"wire\" && p.layer !== lastLayer)\n        ) {\n          if (c.current.length > 2) {\n            c.allPrev.push(c.current)\n          }\n          c.current = p.route_type === \"wire\" ? [p] : []\n          return c\n        }\n        c.current.push(p)\n        return c\n      },\n      {\n        current: [] as typeof mixedRoute,\n        allPrev: [] as Array<typeof mixedRoute>,\n      },\n    )\n    for (const route of subRoutes.allPrev.concat([subRoutes.current])) {\n      // TODO break into segments based on layers\n      const linePath = line(route.map((p) => [p.x, p.y]))\n\n      const layer = route[0]!.route_type === \"wire\" ? route[0]!.layer : \"top\"\n      const layerSign = layer === \"top\" ? 1 : -1\n      // traceGeoms.push(traceGeom)\n      let traceGeom = translate(\n        [0, 0, (layerSign * 1.2) / 2],\n        extrudeLinear(\n          { height: M * layerSign },\n          expand({ delta: 0.1, corners: \"edge\" }, linePath),\n        ),\n      )\n\n      // HACK: Subtract all vias from every trace- this mostly is because the\n      // vias aren't inside the route- we should probably pre-filter to make sure\n      // that vias are only near the route\n      for (const via of pcb_vias) {\n        traceGeom = subtract(\n          traceGeom,\n          cylinder({\n            center: [via.x, via.y, 0],\n            radius: via.outer_diameter / 2,\n            height: 5,\n          }),\n        )\n      }\n      for (const ph of plated_holes) {\n        if (ph.shape === \"circle\") {\n          traceGeom = subtract(\n            traceGeom,\n            cylinder({\n              center: [ph.x, ph.y, 0],\n              radius: ph.outer_diameter / 2,\n              height: 5,\n            }),\n          )\n        }\n      }\n\n      traceGeom = colorize(colors.fr4GreenSolderWithMask, traceGeom)\n\n      traceGeoms.push(traceGeom)\n    }\n  }\n\n  for (const via of pcb_vias) {\n    addPlatedHole({\n      x: via.x,\n      y: via.y,\n      hole_diameter: via.hole_diameter,\n      outer_diameter: via.outer_diameter,\n      shape: \"circle\",\n      layers: [\"top\", \"bottom\"],\n      type: \"pcb_plated_hole\",\n      pcb_plated_hole_id: \"\",\n    })\n  }\n\n  // Colorize to a PCB green color: #05A32E\n  boardGeom = colorize(colors.fr4Green, boardGeom)\n\n  return [boardGeom, ...platedHoleGeoms, ...padGeoms, ...traceGeoms]\n}\n","import type { PCBPlatedHole } from \"@tscircuit/soup\"\nimport type { Geom3 } from \"@jscad/modeling/src/geometries/types\"\nimport { cuboid, cylinder } from \"@jscad/modeling/src/primitives\"\nimport { colorize } from \"@jscad/modeling/src/colors\"\nimport { subtract, union } from \"@jscad/modeling/src/operations/booleans\"\nimport { M, colors } from \"./constants\"\nimport type { GeomContext } from \"../GeomContext\"\n\nexport const platedHole = (\n  plated_hole: PCBPlatedHole,\n  ctx: GeomContext,\n): Geom3 => {\n  if (!(plated_hole as PCBPlatedHole).shape) plated_hole.shape = \"circle\"\n  if (plated_hole.shape === \"circle\") {\n    return colorize(\n      colors.copper,\n      subtract(\n        union(\n          cylinder({\n            center: [plated_hole.x, plated_hole.y, 0],\n            radius: plated_hole.hole_diameter / 2,\n            height: 1.2,\n          }),\n          cylinder({\n            center: [plated_hole.x, plated_hole.y, 1.2 / 2],\n            radius: plated_hole.outer_diameter / 2,\n            height: M,\n          }),\n          cylinder({\n            center: [plated_hole.x, plated_hole.y, -1.2 / 2],\n            radius: plated_hole.outer_diameter / 2,\n            height: M,\n          }),\n        ),\n        cylinder({\n          center: [plated_hole.x, plated_hole.y, 0],\n          radius: plated_hole.hole_diameter / 2 - M,\n          height: 1.5,\n        }),\n      ),\n    )\n  }\n  if (plated_hole.shape === \"pill\") {\n    const shouldRotate = plated_hole.hole_height! > plated_hole.hole_width!\n\n    const holeWidth = shouldRotate\n      ? plated_hole.hole_height!\n      : plated_hole.hole_width!\n    const holeHeight = shouldRotate\n      ? plated_hole.hole_width!\n      : plated_hole.hole_height!\n    const outerHeight = shouldRotate\n      ? plated_hole.outer_width || holeWidth + 0.2\n      : plated_hole.outer_height || holeHeight + 0.2\n\n    const holeRadius = holeHeight / 2\n    const rectLength = Math.abs(holeWidth - holeHeight)\n\n    const mainRect = cuboid({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y, 0]\n        : [plated_hole.x, plated_hole.y, 0],\n      size: shouldRotate\n        ? [holeHeight, rectLength, 1.2]\n        : [rectLength, holeHeight, 1.2],\n    })\n\n    const leftCap = cylinder({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y - rectLength / 2, 0]\n        : [plated_hole.x - rectLength / 2, plated_hole.y, 0],\n      radius: holeRadius,\n      height: 1.2,\n    })\n\n    const rightCap = cylinder({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y + rectLength / 2, 0]\n        : [plated_hole.x + rectLength / 2, plated_hole.y, 0],\n      radius: holeRadius,\n      height: 1.2,\n    })\n\n    const outerMainRect = cuboid({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y, 1.2 / 2]\n        : [plated_hole.x, plated_hole.y, 1.2 / 2],\n      size: shouldRotate\n        ? [outerHeight, rectLength, M]\n        : [rectLength, outerHeight, M],\n    })\n\n    const outerLeftCap = cylinder({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y - rectLength / 2, 1.2 / 2]\n        : [plated_hole.x - rectLength / 2, plated_hole.y, 1.2 / 2],\n      radius: outerHeight / 2,\n      height: M,\n    })\n\n    const outerRightCap = cylinder({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y + rectLength / 2, 1.2 / 2]\n        : [plated_hole.x + rectLength / 2, plated_hole.y, 1.2 / 2],\n      radius: outerHeight / 2,\n      height: M,\n    })\n\n    const bottomMainRect = cuboid({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y, -1.2 / 2]\n        : [plated_hole.x, plated_hole.y, -1.2 / 2],\n      size: shouldRotate\n        ? [outerHeight, rectLength, M]\n        : [rectLength, outerHeight, M],\n    })\n\n    const bottomLeftCap = cylinder({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y - rectLength / 2, -1.2 / 2]\n        : [plated_hole.x - rectLength / 2, plated_hole.y, -1.2 / 2],\n      radius: outerHeight / 2,\n      height: M,\n    })\n\n    const bottomRightCap = cylinder({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y + rectLength / 2, -1.2 / 2]\n        : [plated_hole.x + rectLength / 2, plated_hole.y, -1.2 / 2],\n      radius: outerHeight / 2,\n      height: M,\n    })\n    return colorize(\n      colors.copper,\n      subtract(\n        union(\n          mainRect,\n          leftCap,\n          rightCap,\n          outerMainRect,\n          outerLeftCap,\n          outerRightCap,\n          bottomMainRect,\n          bottomLeftCap,\n          bottomRightCap,\n        ),\n        union(\n          cuboid({\n            center: [plated_hole.x, plated_hole.y, 0],\n            size: shouldRotate\n              ? [holeHeight - M, rectLength, 1.5]\n              : [rectLength, holeHeight - M, 1.5],\n          }),\n          cylinder({\n            center: shouldRotate\n              ? [plated_hole.x, plated_hole.y - rectLength / 2, 0]\n              : [plated_hole.x - rectLength / 2, plated_hole.y, 0],\n            radius: holeRadius - M,\n            height: 1.5,\n          }),\n          cylinder({\n            center: shouldRotate\n              ? [plated_hole.x, plated_hole.y + rectLength / 2, 0]\n              : [plated_hole.x + rectLength / 2, plated_hole.y, 0],\n            radius: holeRadius - M,\n            height: 1.5,\n          }),\n        ),\n      ),\n    )\n    // biome-ignore lint/style/noUselessElse: <explanation>\n  } else {\n    throw new Error(`Unsupported plated hole shape: ${plated_hole.shape}`)\n  }\n}\n","import type { RGB } from \"@jscad/modeling/src/colors\"\n\nexport const M = 0.01\n\nexport const colors = {\n  copper: [0.9, 0.6, 0.2],\n  fr4Green: [0x05 / 255, 0xa3 / 255, 0x2e / 255],\n  fr4GreenSolderWithMask: [0x00 / 255, 0x98 / 255, 0x13 / 255],\n} satisfies Record<string, RGB>\n","import { extrudeLinear } from \"@jscad/modeling/src/operations/extrusions\"\nimport { polygon } from \"@jscad/modeling/src/primitives\"\nimport type { Geom2, Geom3 } from \"@jscad/modeling/src/geometries/types\"\nimport type { Vec2 } from \"@jscad/modeling/src/maths/types\"\nimport type { Point } from \"@tscircuit/soup\"\nimport { translate } from \"@jscad/modeling/src/operations/transforms\"\n\nconst arePointsClockwise = (points: Vec2[]): boolean => {\n  let area = 0\n  for (let i = 0; i < points.length; i++) {\n    const j = (i + 1) % points.length\n    area += points[i]![0] * points[j]![1]\n    area -= points[j]![0] * points[i]![1]\n  }\n  const signedArea = area / 2\n  return signedArea <= 0\n}\n\nexport const createBoardWithOutline = (points: Point[], depth = 1.2): Geom3 => {\n  let outline: Vec2[] = points.map((point) => [point.x, point.y])\n\n  if (arePointsClockwise(outline)) {\n    outline = outline.reverse()\n  }\n\n  const shape: Geom2 = polygon({ points: outline })\n\n  let board: Geom3 = extrudeLinear({ height: depth }, shape)\n\n  board = translate([0, 0, -depth / 2], board)\n\n  return board\n}\n","import { useState, useEffect } from \"react\"\nimport stlSerializer from \"@jscad/stl-serializer\"\nimport { Geom3 } from \"@jscad/modeling/src/geometries/types\"\n\nfunction blobToBase64Url(blob: Blob): Promise<string> {\n  return new Promise((resolve, reject) => {\n    const reader = new FileReader()\n    reader.onload = () => {\n      resolve(reader.result as string)\n    }\n    reader.onerror = reject\n    reader.readAsDataURL(blob)\n  })\n}\n\ntype StlObj = { stlUrl: string; color: number[] }\n\nexport const useStlsFromGeom = (\n  geom: Geom3[] | Geom3 | null,\n): {\n  stls: StlObj[]\n  loading: boolean\n} => {\n  const [stls, setStls] = useState<StlObj[]>([])\n  const [loading, setLoading] = useState(true)\n\n  useEffect(() => {\n    if (!geom) return\n    const generateStls = async () => {\n      setLoading(true)\n      const geometries = Array.isArray(geom) ? geom : [geom]\n\n      const stlPromises = geometries.map(async (g) => {\n        const rawData = stlSerializer.serialize({ binary: true }, [g])\n        const blobData = new Blob(rawData)\n        const stlUrl = await blobToBase64Url(blobData)\n        return { stlUrl, color: g.color! }\n      })\n\n      try {\n        const generatedStls = await Promise.all(stlPromises)\n        setStls(generatedStls)\n      } catch (error) {\n        console.error(\"Error generating STLs:\", error)\n        setStls([])\n      } finally {\n        setLoading(false)\n      }\n    }\n\n    generateStls()\n  }, [geom])\n\n  return { stls, loading }\n}\n","import { useLoader } from \"@react-three/fiber\"\nimport { useRef } from \"react\"\nimport * as THREE from \"three\"\nimport { MTLLoader, OBJLoader, STLLoader } from \"three-stdlib\"\n\nexport function STLModel({\n  stlUrl,\n  mtlUrl,\n  color,\n  opacity = 1,\n}: {\n  stlUrl: string\n  color?: any\n  mtlUrl?: string\n  opacity?: number\n}) {\n  const geom = useLoader(STLLoader, stlUrl)\n  const mesh = useRef<THREE.Mesh>()\n\n  // TODO handle mtl url\n\n  return (\n    <mesh ref={mesh as any}>\n      <primitive object={geom} attach=\"geometry\" />\n      <meshStandardMaterial\n        color={color}\n        transparent={opacity !== 1}\n        opacity={opacity}\n      />\n      {/* <Outlines thickness={0.05} color=\"black\" opacity={0.25} /> */}\n    </mesh>\n  )\n}\n","import { Grid, OrbitControls } from \"@react-three/drei\"\nimport { Canvas, useFrame } from \"@react-three/fiber\"\nimport packageJson from \"../package.json\"\nimport { CubeWithLabeledSides } from \"./three-components/cube-with-labeled-sides\"\n\nexport const RotationTracker = () => {\n  useFrame(({ camera }) => {\n    window.TSCI_MAIN_CAMERA_ROTATION = camera.rotation\n  })\n\n  return <></>\n}\n\nexport const CadViewerContainer = ({ children }: { children: any }) => {\n  return (\n    <div style={{ position: \"relative\", width: \"100%\", height: \"100%\" }}>\n      <div\n        style={{\n          position: \"absolute\",\n          top: 0,\n          left: 0,\n          width: 120,\n          height: 120,\n        }}\n      >\n        <Canvas\n          camera={{\n            up: [0, 0, 1],\n            // rotation: [-Math.PI / 2, 0, 0],\n            // lookAt: new THREE.Vector3(0, 0, 0),\n            position: [1, 1, 1],\n          }}\n          style={{ zIndex: 10 }}\n        >\n          <ambientLight intensity={Math.PI / 2} />\n          <CubeWithLabeledSides />\n        </Canvas>\n      </div>\n      <Canvas\n        scene={{ up: [0, 0, 1] }}\n        camera={{ up: [0, 0, 1], position: [5, 5, 5] }}\n      >\n        <RotationTracker />\n        <OrbitControls autoRotate autoRotateSpeed={1} />\n        <ambientLight intensity={Math.PI / 2} />\n        <pointLight\n          position={[-10, -10, 10]}\n          decay={0}\n          intensity={Math.PI / 4}\n        />\n        <Grid\n          rotation={[Math.PI / 2, 0, 0]}\n          infiniteGrid={true}\n          cellSize={1}\n          sectionSize={10}\n        />\n        {children}\n      </Canvas>\n      <div\n        style={{\n          position: \"absolute\",\n          right: 24,\n          bottom: 24,\n          fontFamily: \"sans-serif\",\n          color: \"white\",\n          WebkitTextStroke: \"0.5px rgba(0, 0, 0, 0.5)\",\n          // color: \"rgba(255, 255, 255, 0.75)\",\n          // textShadow:\n          //   \"0px 0px 1px rgba(0, 0, 0, 0.5), 0px 0px 2px rgba(0, 0, 0, 0.5)\",\n          fontSize: 11,\n        }}\n      >\n        @{packageJson.version}\n      </div>\n    </div>\n  )\n}\n","{\n  \"name\": \"@tscircuit/3d-viewer\",\n  \"version\": \"0.0.43\",\n  \"main\": \"./dist/index.js\",\n  \"files\": [\n    \"dist\"\n  ],\n  \"scripts\": {\n    \"start\": \"bun run storybook\",\n    \"dev:old\": \"bunx --bun vite\",\n    \"build\": \"tsup ./src/index.tsx --dts --sourcemap\",\n    \"prepublish\": \"npm run build\",\n    \"preview\": \"vite preview\",\n    \"storybook\": \"storybook dev -p 6006\",\n    \"build-storybook\": \"storybook build\",\n    \"format\": \"biome format . --write\"\n  },\n  \"dependencies\": {\n    \"@jscad/modeling\": \"^2.12.2\",\n    \"@jscad/regl-renderer\": \"^2.6.9\",\n    \"@jscad/stl-serializer\": \"^2.1.17\",\n    \"@react-three/drei\": \"^9.115.0\",\n    \"@react-three/fiber\": \"^8.16.8\",\n    \"@tscircuit/core\": \"^0.0.136\",\n    \"@tscircuit/react-fiber\": \"^1.1.29\",\n    \"@tscircuit/soup\": \"^0.0.69\",\n    \"@tscircuit/soup-util\": \"^0.0.26\",\n    \"@types/three\": \"^0.165.0\",\n    \"jscad-electronics\": \"^0.0.22\",\n    \"jscad-fiber\": \"^0.0.63\",\n    \"jscad-planner\": \"^0.0.7\",\n    \"react\": \"^18.3.1\",\n    \"react-dom\": \"^18.3.1\",\n    \"react-use-gesture\": \"^9.1.3\",\n    \"three\": \"^0.165.0\",\n    \"three-stdlib\": \"^2.30.3\"\n  },\n  \"devDependencies\": {\n    \"@biomejs/biome\": \"^1.8.3\",\n    \"@chromatic-com/storybook\": \"^1.5.0\",\n    \"@storybook/addon-essentials\": \"^8.1.10\",\n    \"@storybook/addon-interactions\": \"^8.1.10\",\n    \"@storybook/addon-links\": \"^8.1.10\",\n    \"@storybook/addon-onboarding\": \"^8.1.10\",\n    \"@storybook/blocks\": \"^8.1.10\",\n    \"@storybook/builder-vite\": \"^8.1.10\",\n    \"@storybook/react\": \"^8.1.10\",\n    \"@storybook/react-vite\": \"^8.1.10\",\n    \"@storybook/test\": \"^8.1.10\",\n    \"@types/react\": \"^18.3.3\",\n    \"@types/react-dom\": \"^18.3.0\",\n    \"@vitejs/plugin-react\": \"^4.3.1\",\n    \"circuit-json\": \"^0.0.77\",\n    \"storybook\": \"^8.1.10\",\n    \"strip-ansi\": \"^7.1.0\",\n    \"tsup\": \"^8.1.0\",\n    \"typescript\": \"^5.5.3\",\n    \"vite\": \"^5.3.1\",\n    \"vite-tsconfig-paths\": \"^4.3.2\"\n  }\n}\n","import { Text } from \"@react-three/drei\"\nimport { useFrame } from \"@react-three/fiber\"\nimport { useRef } from \"react\"\nimport * as THREE from \"three\"\n\ndeclare global {\n  interface Window {\n    TSCI_MAIN_CAMERA_ROTATION: THREE.Euler\n  }\n}\nif (typeof window !== \"undefined\") {\n  window.TSCI_MAIN_CAMERA_ROTATION = new THREE.Euler(0, 0, 0)\n}\n\nfunction computePointInFront(rotationVector, distance) {\n  // Create a quaternion from the rotation vector\n  const quaternion = new THREE.Quaternion().setFromEuler(\n    new THREE.Euler(rotationVector.x, rotationVector.y, rotationVector.z),\n  )\n\n  // Create a vector pointing forward (along the negative z-axis)\n  const forwardVector = new THREE.Vector3(0, 0, 1)\n\n  // Apply the rotation to the forward vector\n  forwardVector.applyQuaternion(quaternion)\n\n  // Scale the rotated vector by the distance\n  const result = forwardVector.multiplyScalar(distance)\n\n  return result\n}\n\nexport const CubeWithLabeledSides = ({}: any) => {\n  const ref = useRef<THREE.Mesh>()\n  const rotationTrackingRef = useRef({ lastRotation: new THREE.Euler() })\n  useFrame((state, delta) => {\n    if (!ref.current) return\n\n    const mainRot = window.TSCI_MAIN_CAMERA_ROTATION\n\n    // Use window.TSCI_CAMERA_ROTATION to compute the position of the camera\n    const cameraPosition = computePointInFront(mainRot, 2)\n\n    state.camera.position.copy(cameraPosition)\n    state.camera.lookAt(0, 0, 0)\n  })\n  return (\n    <mesh ref={ref as any} rotation={[Math.PI / 2, 0, 0]}>\n      <boxGeometry args={[1, 1, 1]} />\n      <meshStandardMaterial color=\"white\" />\n      <Text position={[0, 0, 0.51]} fontSize={0.25} color=\"black\">\n        Front\n      </Text>\n      <Text\n        position={[0, 0, -0.51]}\n        fontSize={0.25}\n        color=\"black\"\n        rotation={[0, Math.PI, 0]}\n      >\n        Back\n      </Text>\n      <Text\n        position={[0.51, 0, 0]}\n        fontSize={0.25}\n        color=\"black\"\n        rotation={[0, Math.PI / 2, 0]}\n      >\n        Right\n      </Text>\n      <Text\n        position={[-0.51, 0, 0]}\n        fontSize={0.25}\n        color=\"black\"\n        rotation={[0, -Math.PI / 2, 0]}\n      >\n        Left\n      </Text>\n      <Text\n        position={[0, 0.51, 0]}\n        fontSize={0.25}\n        color=\"black\"\n        rotation={[-Math.PI / 2, 0, 0]}\n      >\n        Top\n      </Text>\n      <Text\n        position={[0, -0.51, 0]}\n        fontSize={0.25}\n        color=\"black\"\n        rotation={[Math.PI / 2, 0, 0]}\n      >\n        Bottom\n      </Text>\n      <lineSegments\n        args={[new THREE.EdgesGeometry(new THREE.BoxGeometry(1, 1, 1))]}\n        material={\n          new THREE.LineBasicMaterial({\n            color: 0x000000,\n            linewidth: 2,\n          })\n        }\n      />\n    </mesh>\n  )\n}\n","import { Html } from \"@react-three/drei\"\nimport { GroupProps, useFrame, useThree } from \"@react-three/fiber\"\nimport { useRef, useState } from \"react\"\nimport type { Vector3 } from \"three\"\nimport * as THREE from \"three\"\n\nconst ContainerWithTooltip = ({\n  children,\n  isHovered,\n  onHover,\n  componentId,\n  name,\n  position,\n}: {\n  children: React.ReactNode\n  componentId: string\n  name: string\n  position?: Vector3 | [number, number, number]\n  onHover: (id: string | null) => void\n  isHovered: boolean\n}) => {\n  const [mousePosition, setMousePosition] = useState<[number, number, number]>([\n    0, 0, 0,\n  ])\n  const { camera } = useThree()\n  const mouseRef = useRef(new THREE.Vector2())\n\n  // Update tooltip position on every frame when hovered\n  useFrame(() => {\n    if (isHovered) {\n      // Project the stored mouse coordinates into 3D space\n      const vector = new THREE.Vector3(\n        mouseRef.current.x,\n        mouseRef.current.y,\n        0.5,\n      )\n      vector.unproject(camera)\n      setMousePosition([vector.x, vector.y, vector.z])\n    }\n  })\n\n  const groupProps: GroupProps = {\n    onPointerEnter: (e) => {\n      e.stopPropagation()\n      // Store normalized mouse coordinates\n      mouseRef.current.set(\n        (e.clientX / window.innerWidth) * 2 - 1,\n        -(e.clientY / window.innerHeight) * 2 + 1,\n      )\n      onHover(componentId)\n    },\n    onPointerMove: (e) => {\n      e.stopPropagation()\n      // Update normalized mouse coordinates\n      mouseRef.current.set(\n        (e.clientX / window.innerWidth) * 2 - 1,\n        -(e.clientY / window.innerHeight) * 2 + 1,\n      )\n    },\n    onPointerLeave: (e) => {\n      e.stopPropagation()\n      onHover(null)\n    },\n  }\n\n  return (\n    <group {...groupProps}>\n      {children}\n      {isHovered && (\n        <Html\n          position={mousePosition}\n          style={{\n            fontFamily: \"sans-serif\",\n            transform: \"translate3d(50%, 50%, 0)\",\n            backgroundColor: \"white\",\n            padding: \"5px\",\n            borderRadius: \"3px\",\n            pointerEvents: \"none\",\n          }}\n        >\n          {name}\n        </Html>\n      )}\n    </group>\n  )\n}\n\nexport default ContainerWithTooltip\n","import { useState, useEffect } from \"react\"\nimport type { Group } from \"three\"\nimport { MTLLoader, OBJLoader } from \"three-stdlib\"\n\n// Define the type for our cache\ninterface CacheItem {\n  promise: Promise<any>\n  result: Group | null\n}\n\ndeclare global {\n  interface Window {\n    TSCIRCUIT_OBJ_LOADER_CACHE: Map<string, CacheItem>\n  }\n}\n\n// Ensure the global cache exists\nif (typeof window !== \"undefined\" && !window.TSCIRCUIT_OBJ_LOADER_CACHE) {\n  window.TSCIRCUIT_OBJ_LOADER_CACHE = new Map<string, CacheItem>()\n}\n\nexport function useGlobalObjLoader(url: string | null): Group | null | Error {\n  const [obj, setObj] = useState<Group | null | Error>(null)\n\n  useEffect(() => {\n    if (!url) return\n\n    const cache = window.TSCIRCUIT_OBJ_LOADER_CACHE\n    let hasUrlChanged = false\n\n    async function loadAndParseObj() {\n      try {\n        const response = await fetch(url!)\n        const text = await response.text()\n\n        const mtlContent = text\n          .match(/newmtl[\\s\\S]*?endmtl/g)\n          ?.join(\"\\n\")!\n          .replace(/d 0\\./g, \"d 1.\")!\n        const objContent = text.replace(/newmtl[\\s\\S]*?endmtl/g, \"\")\n\n        const mtlLoader = new MTLLoader()\n        mtlLoader.setMaterialOptions({\n          invertTrProperty: true,\n        })\n        const materials = mtlLoader.parse(\n          mtlContent.replace(\n            /Kd\\s+([\\d.]+)\\s+([\\d.]+)\\s+([\\d.]+)/g,\n            \"Kd $2 $2 $2\",\n          ),\n          \"test.mtl\",\n        )\n\n        const objLoader = new OBJLoader()\n        objLoader.setMaterials(materials)\n        return objLoader.parse(objContent)\n      } catch (error) {\n        return error as Error\n      }\n    }\n\n    function loadUrl() {\n      if (cache.has(url!)) {\n        const cacheItem = cache.get(url!)!\n        if (cacheItem.result) {\n          // If we have a result, clone it\n          return Promise.resolve(cacheItem.result.clone())\n        }\n        // If we're still loading, return the existing promise\n        return cacheItem.promise.then((result) => result.clone())\n      }\n      // If it's not in the cache, create a new promise and cache it\n      const promise = loadAndParseObj().then((result) => {\n        if (result instanceof Error) {\n          // If the result is an Error, return it\n          return result\n        }\n        cache.set(url!, { ...cache.get(url!)!, result })\n        return result\n      })\n      cache.set(url!, { promise, result: null })\n      return promise\n    }\n\n    loadUrl()\n      .then((result) => {\n        if (hasUrlChanged) return\n        setObj(result)\n      })\n      .catch((error) => {\n        console.error(error)\n      })\n\n    return () => {\n      hasUrlChanged = true\n    }\n  }, [url])\n\n  return obj\n}\n","import ContainerWithTooltip from \"src/ContainerWithTooltip\"\nimport { useGlobalObjLoader } from \"src/hooks/use-global-obj-loader\"\nimport type { Euler, Vector3 } from \"three\"\n\nexport function MixedStlModel({\n  url,\n  position,\n  rotation,\n  componentId,\n  name,\n  onHover,\n  isHovered,\n}: {\n  url: string\n  position?: Vector3 | [number, number, number]\n  rotation?: Euler | [number, number, number]\n  componentId: string\n  name: string\n  onHover: (id: string | null) => void\n  isHovered: boolean\n}) {\n  const obj = useGlobalObjLoader(url)\n\n  if (!obj) {\n    return (\n      <ContainerWithTooltip\n        componentId={componentId}\n        name={name}\n        isHovered={isHovered}\n        onHover={onHover}\n      >\n        <mesh position={position}>\n          <boxGeometry args={[0.5, 0.5, 0.5]} />\n          <meshStandardMaterial transparent color=\"red\" opacity={0.25} />\n        </mesh>\n      </ContainerWithTooltip>\n    )\n  }\n\n  // Check if obj is valid before rendering\n  if (obj instanceof Error) {\n    return (\n      <ContainerWithTooltip\n        componentId={componentId}\n        name={name}\n        isHovered={isHovered}\n        onHover={onHover}\n      >\n        <mesh position={position}>\n          <boxGeometry args={[0.5, 0.5, 0.5]} />\n          <meshStandardMaterial transparent color=\"red\" opacity={0.5} />\n          <meshBasicMaterial color=\"red\" />\n        </mesh>\n      </ContainerWithTooltip>\n    )\n  }\n  return (\n    <ContainerWithTooltip\n      componentId={componentId}\n      name={name}\n      isHovered={isHovered}\n      onHover={onHover}\n    >\n      <primitive rotation={rotation} position={position} object={obj} />\n    </ContainerWithTooltip>\n  )\n}\n","import type { JscadOperation } from \"jscad-planner\"\nimport { executeJscadOperations } from \"jscad-planner\"\nimport jscad from \"@jscad/modeling\"\nimport { convertCSGToThreeGeom } from \"jscad-fiber\"\nimport * as THREE from \"three\"\nimport { useMemo } from \"react\"\nimport ContainerWithTooltip from \"src/ContainerWithTooltip\"\n\nexport const JscadModel = ({\n  jscadPlan,\n  positionOffset,\n  rotationOffset,\n  componentId,\n  name,\n  onHover,\n  isHovered,\n}: {\n  jscadPlan: JscadOperation\n  positionOffset?: [number, number, number]\n  rotationOffset?: [number, number, number]\n  componentId: string\n  name: string\n  onHover: (id: string | null) => void\n  isHovered: boolean\n}) => {\n  const { threeGeom, material } = useMemo(() => {\n    const jscadObject = executeJscadOperations(jscad as any, jscadPlan)\n\n    const threeGeom = convertCSGToThreeGeom(jscadObject)\n\n    const material = new THREE.MeshStandardMaterial({\n      vertexColors: true,\n      side: THREE.DoubleSide, // Ensure both sides are visible\n    })\n    return { threeGeom, material }\n  }, [jscadPlan])\n  useMemo(() => {\n    if (isHovered) {\n      const color = new THREE.Color(material.color.getHex())\n      material.emissive.copy(color)\n      material.emissive.setRGB(0, 0, 1)\n      material.emissiveIntensity = 0.2\n    } else {\n      material.emissiveIntensity = 0\n    }\n  }, [isHovered, material])\n  if (!threeGeom) return null\n\n  return (\n    <ContainerWithTooltip\n      componentId={componentId}\n      name={name}\n      isHovered={isHovered}\n      onHover={onHover}\n      position={positionOffset}\n    >\n      <mesh\n        geometry={threeGeom}\n        material={material}\n        position={positionOffset}\n        rotation={rotationOffset}\n      />\n    </ContainerWithTooltip>\n  )\n}\n","import { Footprinter3d } from \"jscad-electronics\"\nimport { createJSCADRenderer } from \"jscad-fiber\"\nimport { jscadPlanner } from \"jscad-planner\"\nimport { useMemo } from \"react\"\nimport { JscadModel } from \"./JscadModel\"\n\nconst { createJSCADRoot } = createJSCADRenderer(jscadPlanner as any)\n\nexport const FootprinterModel = ({\n  positionOffset,\n  footprint,\n  rotationOffset,\n  componentId,\n  name,\n  onHover,\n  isHovered,\n}: {\n  positionOffset: any\n  footprint: string\n  rotationOffset?: [number, number, number]\n  componentId: string\n  name: string\n  onHover: (id: string | null) => void\n  isHovered: boolean\n}) => {\n  // biome-ignore lint/correctness/useExhaustiveDependencies: <explanation>\n  const jscadPlan = useMemo(() => {\n    if (!footprint) return null\n    const jscadPlan: any[] = []\n    const root = createJSCADRoot(jscadPlan)\n    root.render(<Footprinter3d footprint={footprint} />)\n    return jscadPlan\n  }, [footprint])\n\n  if (!jscadPlan) return null\n\n  return (\n    <>\n      {jscadPlan.map((plan, index) => (\n        <JscadModel\n          // biome-ignore lint/suspicious/noArrayIndexKey: <explanation>\n          key={index}\n          positionOffset={positionOffset}\n          rotationOffset={rotationOffset}\n          jscadPlan={plan}\n          componentId={componentId}\n          name={name}\n          onHover={onHover}\n          isHovered={isHovered}\n        />\n      ))}\n    </>\n  )\n}\n","export const tuple = <T extends any[]>(...args: T): T => args\n"],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA;AAAA;AAAA;AAAA;AAAA;;;ACAA,kBAAwB;AACxB,mBAAwB;AAGjB,IAAM,2BAA2B,CACtC,UACA,gBACwB;AACxB,aAAO,sBAAQ,MAAM;AACnB,QAAI,CAAC,SAAU;AACf,UAAM,UAAU,IAAI,oBAAQ;AAC5B,YAAQ,IAAI,QAAQ;AACpB,YAAQ,OAAO;AACf,WAAO,QAAQ,eAAe;AAAA,EAChC,GAAG,CAAC,QAAQ,CAAC;AACf;;;ACbA,IAAAA,oBAAmB;AACnB,IAAAC,gBAAkC;;;ACDlC,uBAAmB;AACnB,IAAAC,qBAA0B;AAC1B,IAAAC,qBAAuC;AACvC,IAAAC,iBAAyB;AACzB,IAAAC,mBAAgC;;;ACJhC,wBAAiC;AACjC,oBAAyB;AACzB,sBAAgC;;;ACFzB,IAAM,IAAI;AAEV,IAAM,SAAS;AAAA,EACpB,QAAQ,CAAC,KAAK,KAAK,GAAG;AAAA,EACtB,UAAU,CAAC,IAAO,KAAK,MAAO,KAAK,KAAO,GAAG;AAAA,EAC7C,wBAAwB,CAAC,IAAO,KAAK,MAAO,KAAK,KAAO,GAAG;AAC7D;;;ADAO,IAAM,aAAa,CACxB,aACA,QACU;AACV,MAAI,CAAE,YAA8B,MAAO,aAAY,QAAQ;AAC/D,MAAI,YAAY,UAAU,UAAU;AAClC,eAAO;AAAA,MACL,OAAO;AAAA,UACP;AAAA,YACE;AAAA,cACE,4BAAS;AAAA,YACP,QAAQ,CAAC,YAAY,GAAG,YAAY,GAAG,CAAC;AAAA,YACxC,QAAQ,YAAY,gBAAgB;AAAA,YACpC,QAAQ;AAAA,UACV,CAAC;AAAA,cACD,4BAAS;AAAA,YACP,QAAQ,CAAC,YAAY,GAAG,YAAY,GAAG,MAAM,CAAC;AAAA,YAC9C,QAAQ,YAAY,iBAAiB;AAAA,YACrC,QAAQ;AAAA,UACV,CAAC;AAAA,cACD,4BAAS;AAAA,YACP,QAAQ,CAAC,YAAY,GAAG,YAAY,GAAG,OAAO,CAAC;AAAA,YAC/C,QAAQ,YAAY,iBAAiB;AAAA,YACrC,QAAQ;AAAA,UACV,CAAC;AAAA,QACH;AAAA,YACA,4BAAS;AAAA,UACP,QAAQ,CAAC,YAAY,GAAG,YAAY,GAAG,CAAC;AAAA,UACxC,QAAQ,YAAY,gBAAgB,IAAI;AAAA,UACxC,QAAQ;AAAA,QACV,CAAC;AAAA,MACH;AAAA,IACF;AAAA,EACF;AACA,MAAI,YAAY,UAAU,QAAQ;AAChC,UAAM,eAAe,YAAY,cAAe,YAAY;AAE5D,UAAM,YAAY,eACd,YAAY,cACZ,YAAY;AAChB,UAAM,aAAa,eACf,YAAY,aACZ,YAAY;AAChB,UAAM,cAAc,eAChB,YAAY,eAAe,YAAY,MACvC,YAAY,gBAAgB,aAAa;AAE7C,UAAM,aAAa,aAAa;AAChC,UAAM,aAAa,KAAK,IAAI,YAAY,UAAU;AAElD,UAAM,eAAW,0BAAO;AAAA,MACtB,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,GAAG,CAAC,IAChC,CAAC,YAAY,GAAG,YAAY,GAAG,CAAC;AAAA,MACpC,MAAM,eACF,CAAC,YAAY,YAAY,GAAG,IAC5B,CAAC,YAAY,YAAY,GAAG;AAAA,IAClC,CAAC;AAED,UAAM,cAAU,4BAAS;AAAA,MACvB,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,CAAC,IACjD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,CAAC;AAAA,MACrD,QAAQ;AAAA,MACR,QAAQ;AAAA,IACV,CAAC;AAED,UAAM,eAAW,4BAAS;AAAA,MACxB,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,CAAC,IACjD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,CAAC;AAAA,MACrD,QAAQ;AAAA,MACR,QAAQ;AAAA,IACV,CAAC;AAED,UAAM,oBAAgB,0BAAO;AAAA,MAC3B,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,GAAG,MAAM,CAAC,IACtC,CAAC,YAAY,GAAG,YAAY,GAAG,MAAM,CAAC;AAAA,MAC1C,MAAM,eACF,CAAC,aAAa,YAAY,CAAC,IAC3B,CAAC,YAAY,aAAa,CAAC;AAAA,IACjC,CAAC;AAED,UAAM,mBAAe,4BAAS;AAAA,MAC5B,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,MAAM,CAAC,IACvD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,MAAM,CAAC;AAAA,MAC3D,QAAQ,cAAc;AAAA,MACtB,QAAQ;AAAA,IACV,CAAC;AAED,UAAM,oBAAgB,4BAAS;AAAA,MAC7B,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,MAAM,CAAC,IACvD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,MAAM,CAAC;AAAA,MAC3D,QAAQ,cAAc;AAAA,MACtB,QAAQ;AAAA,IACV,CAAC;AAED,UAAM,qBAAiB,0BAAO;AAAA,MAC5B,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,GAAG,OAAO,CAAC,IACvC,CAAC,YAAY,GAAG,YAAY,GAAG,OAAO,CAAC;AAAA,MAC3C,MAAM,eACF,CAAC,aAAa,YAAY,CAAC,IAC3B,CAAC,YAAY,aAAa,CAAC;AAAA,IACjC,CAAC;AAED,UAAM,oBAAgB,4BAAS;AAAA,MAC7B,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,OAAO,CAAC,IACxD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,OAAO,CAAC;AAAA,MAC5D,QAAQ,cAAc;AAAA,MACtB,QAAQ;AAAA,IACV,CAAC;AAED,UAAM,qBAAiB,4BAAS;AAAA,MAC9B,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,OAAO,CAAC,IACxD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,OAAO,CAAC;AAAA,MAC5D,QAAQ,cAAc;AAAA,MACtB,QAAQ;AAAA,IACV,CAAC;AACD,eAAO;AAAA,MACL,OAAO;AAAA,UACP;AAAA,YACE;AAAA,UACE;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,QACF;AAAA,YACA;AAAA,cACE,0BAAO;AAAA,YACL,QAAQ,CAAC,YAAY,GAAG,YAAY,GAAG,CAAC;AAAA,YACxC,MAAM,eACF,CAAC,aAAa,GAAG,YAAY,GAAG,IAChC,CAAC,YAAY,aAAa,GAAG,GAAG;AAAA,UACtC,CAAC;AAAA,cACD,4BAAS;AAAA,YACP,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,CAAC,IACjD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,CAAC;AAAA,YACrD,QAAQ,aAAa;AAAA,YACrB,QAAQ;AAAA,UACV,CAAC;AAAA,cACD,4BAAS;AAAA,YACP,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,CAAC,IACjD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,CAAC;AAAA,YACrD,QAAQ,aAAa;AAAA,YACrB,QAAQ;AAAA,UACV,CAAC;AAAA,QACH;AAAA,MACF;AAAA,IACF;AAAA,EAEF,OAAO;AACL,UAAM,IAAI,MAAM,kCAAkC,YAAY,KAAK,EAAE;AAAA,EACvE;AACF;;;ADrKA,IAAAC,qBAA8B;AAC9B,wBAAuB;;;AGVvB,wBAA8B;AAC9B,IAAAC,qBAAwB;AAIxB,wBAA0B;AAE1B,IAAM,qBAAqB,CAAC,WAA4B;AACtD,MAAI,OAAO;AACX,WAAS,IAAI,GAAG,IAAI,OAAO,QAAQ,KAAK;AACtC,UAAM,KAAK,IAAI,KAAK,OAAO;AAC3B,YAAQ,OAAO,CAAC,EAAG,CAAC,IAAI,OAAO,CAAC,EAAG,CAAC;AACpC,YAAQ,OAAO,CAAC,EAAG,CAAC,IAAI,OAAO,CAAC,EAAG,CAAC;AAAA,EACtC;AACA,QAAM,aAAa,OAAO;AAC1B,SAAO,cAAc;AACvB;AAEO,IAAM,yBAAyB,CAAC,QAAiB,QAAQ,QAAe;AAC7E,MAAI,UAAkB,OAAO,IAAI,CAAC,UAAU,CAAC,MAAM,GAAG,MAAM,CAAC,CAAC;AAE9D,MAAI,mBAAmB,OAAO,GAAG;AAC/B,cAAU,QAAQ,QAAQ;AAAA,EAC5B;AAEA,QAAM,YAAe,4BAAQ,EAAE,QAAQ,QAAQ,CAAC;AAEhD,MAAI,YAAe,iCAAc,EAAE,QAAQ,MAAM,GAAG,KAAK;AAEzD,cAAQ,6BAAU,CAAC,GAAG,GAAG,CAAC,QAAQ,CAAC,GAAG,KAAK;AAE3C,SAAO;AACT;;;AHnBO,IAAM,0BAA0B,CAAC,SAAoC;AAC1E,QAAM,YAAQ,qBAAG,IAAI,EAAE,UAAU,KAAK,EAAE,CAAC;AACzC,MAAI,CAAC,OAAO;AACV,UAAM,IAAI,MAAM,oBAAoB;AAAA,EACtC;AACA,QAAM,mBAAe,qBAAG,IAAI,EAAE,gBAAgB,KAAK;AACnD,QAAM,YAAQ,qBAAG,IAAI,EAAE,SAAS,KAAK;AACrC,QAAM,WAAO,qBAAG,IAAI,EAAE,WAAW,KAAK;AACtC,QAAM,aAAS,qBAAG,IAAI,EAAE,UAAU,KAAK;AACvC,QAAM,eAAW,qBAAG,IAAI,EAAE,QAAQ,KAAK;AAGvC,MAAI;AACJ,MAAI,MAAM,WAAW,MAAM,QAAQ,SAAS;AAC1C,gBAAY,uBAAuB,MAAM,SAAS,GAAG;AAAA,MAClD,iBAAY,2BAAO,EAAE,MAAM,CAAC,MAAM,OAAO,MAAM,QAAQ,GAAG,EAAE,CAAC;AAElE,QAAM,kBAA2B,CAAC;AAClC,QAAM,YAAqB,CAAC;AAC5B,QAAM,WAAoB,CAAC;AAC3B,QAAM,aAAsB,CAAC;AAC7B,QAAM,MAAM;AAAA,IACV,cAAc;AAAA,EAChB;AAEA,QAAM,gBAAgB,CAAC,gBAA+B;AACpD,QAAI,YAAY,UAAU,UAAU;AAClC,YAAM,aAAS,6BAAS;AAAA,QACtB,QAAQ,CAAC,YAAY,GAAG,YAAY,GAAG,CAAC;AAAA,QACxC,QAAQ,YAAY,gBAAgB,IAAI;AAAA,MAC1C,CAAC;AAED,sBAAY,2BAAS,WAAW,MAAM;AAEtC,YAAM,iBAAiB,WAAW,aAAa,GAAG;AAClD,sBAAgB,KAAK,cAAc;AAAA,IACrC,WAAW,YAAY,UAAU,QAAQ;AACvC,YAAM,eAAe,YAAY,cAAe,YAAY;AAE5D,YAAM,YAAY,eACd,YAAY,cACZ,YAAY;AAChB,YAAM,aAAa,eACf,YAAY,aACZ,YAAY;AAEhB,YAAM,aAAa,aAAa;AAChC,YAAM,aAAa,KAAK,IAAI,YAAY,UAAU;AAElD,YAAM,eAAW;AAAA,YACf,2BAAO;AAAA,UACL,QAAQ,CAAC,YAAY,GAAG,YAAY,GAAG,CAAC;AAAA,UACxC,MAAM,eACF,CAAC,YAAY,YAAY,GAAG,IAC5B,CAAC,YAAY,YAAY,GAAG;AAAA,QAClC,CAAC;AAAA,YACD,6BAAS;AAAA,UACP,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,CAAC,IACjD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,CAAC;AAAA,UACrD,QAAQ;AAAA,UACR,QAAQ;AAAA,QACV,CAAC;AAAA,YACD,6BAAS;AAAA,UACP,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,CAAC,IACjD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,CAAC;AAAA,UACrD,QAAQ;AAAA,UACR,QAAQ;AAAA,QACV,CAAC;AAAA,MACH;AACA,sBAAY,2BAAS,WAAW,QAAQ;AAExC,YAAM,iBAAiB,WAAW,aAAa,GAAG;AAClD,sBAAgB,KAAK,cAAc;AAAA,IACrC;AAAA,EACF;AAEA,aAAW,eAAe,cAAc;AACtC,kBAAc,WAAW;AAAA,EAC3B;AAEA,aAAW,QAAQ,OAAO;AAExB,QAAI,KAAK,eAAe,WAAW,KAAK,eAAe,UAAU;AAC/D,YAAM,aAAS,6BAAS;AAAA,QACtB,QAAQ,CAAC,KAAK,GAAG,KAAK,GAAG,CAAC;AAAA,QAC1B,QAAQ,KAAK,gBAAgB,IAAI;AAAA,MACnC,CAAC;AACD,sBAAY,2BAAS,WAAW,MAAM;AAAA,IACxC;AAAA,EACF;AAEA,aAAW,OAAO,MAAM;AACtB,UAAM,YAAY,IAAI,UAAU,WAAW,KAAK;AAChD,QAAI,IAAI,UAAU,QAAQ;AACxB,YAAM,cAAU;AAAA,QACd,OAAO;AAAA,YACP,2BAAO;AAAA,UACL,QAAQ,CAAC,IAAI,GAAG,IAAI,GAAI,YAAY,MAAO,IAAI,YAAY,CAAC;AAAA,UAC5D,MAAM,CAAC,IAAI,OAAO,IAAI,QAAQ,CAAC;AAAA,QACjC,CAAC;AAAA,MACH;AACA,eAAS,KAAK,OAAO;AAAA,IACvB,WAAW,IAAI,UAAU,UAAU;AACjC,YAAM,cAAU;AAAA,QACd,OAAO;AAAA,YACP,6BAAS;AAAA,UACP,QAAQ,CAAC,IAAI,GAAG,IAAI,GAAI,YAAY,MAAO,IAAI,YAAY,CAAC;AAAA,UAC5D,QAAQ,IAAI;AAAA,UACZ,QAAQ;AAAA,QACV,CAAC;AAAA,MACH;AACA,eAAS,KAAK,OAAO;AAAA,IACvB;AAAA,EACF;AAEA,aAAW,EAAE,OAAO,WAAW,KAAK,QAAQ;AAC1C,QAAI,WAAW,SAAS,EAAG;AAC3B,UAAM,YAAY,WAAW;AAAA,MAC3B,CAAC,GAAG,MAAM;AAER,cAAM,YAAY,EAAE,UAAU,EAAE,QAAQ,SAAS,CAAC,GAAG;AACrD,YACE,EAAE,eAAe,SAChB,EAAE,eAAe,UAAU,EAAE,UAAU,WACxC;AACA,cAAI,EAAE,QAAQ,SAAS,GAAG;AACxB,cAAE,QAAQ,KAAK,EAAE,OAAO;AAAA,UAC1B;AACA,YAAE,UAAU,EAAE,eAAe,SAAS,CAAC,CAAC,IAAI,CAAC;AAC7C,iBAAO;AAAA,QACT;AACA,UAAE,QAAQ,KAAK,CAAC;AAChB,eAAO;AAAA,MACT;AAAA,MACA;AAAA,QACE,SAAS,CAAC;AAAA,QACV,SAAS,CAAC;AAAA,MACZ;AAAA,IACF;AACA,eAAW,SAAS,UAAU,QAAQ,OAAO,CAAC,UAAU,OAAO,CAAC,GAAG;AAEjE,YAAM,eAAW,yBAAK,MAAM,IAAI,CAAC,MAAM,CAAC,EAAE,GAAG,EAAE,CAAC,CAAC,CAAC;AAElD,YAAM,QAAQ,MAAM,CAAC,EAAG,eAAe,SAAS,MAAM,CAAC,EAAG,QAAQ;AAClE,YAAM,YAAY,UAAU,QAAQ,IAAI;AAExC,UAAI,gBAAY;AAAA,QACd,CAAC,GAAG,GAAI,YAAY,MAAO,CAAC;AAAA,YAC5B;AAAA,UACE,EAAE,QAAQ,IAAI,UAAU;AAAA,cACxB,0BAAO,EAAE,OAAO,KAAK,SAAS,OAAO,GAAG,QAAQ;AAAA,QAClD;AAAA,MACF;AAKA,iBAAW,OAAO,UAAU;AAC1B,wBAAY;AAAA,UACV;AAAA,cACA,6BAAS;AAAA,YACP,QAAQ,CAAC,IAAI,GAAG,IAAI,GAAG,CAAC;AAAA,YACxB,QAAQ,IAAI,iBAAiB;AAAA,YAC7B,QAAQ;AAAA,UACV,CAAC;AAAA,QACH;AAAA,MACF;AACA,iBAAW,MAAM,cAAc;AAC7B,YAAI,GAAG,UAAU,UAAU;AACzB,0BAAY;AAAA,YACV;AAAA,gBACA,6BAAS;AAAA,cACP,QAAQ,CAAC,GAAG,GAAG,GAAG,GAAG,CAAC;AAAA,cACtB,QAAQ,GAAG,iBAAiB;AAAA,cAC5B,QAAQ;AAAA,YACV,CAAC;AAAA,UACH;AAAA,QACF;AAAA,MACF;AAEA,sBAAY,yBAAS,OAAO,wBAAwB,SAAS;AAE7D,iBAAW,KAAK,SAAS;AAAA,IAC3B;AAAA,EACF;AAEA,aAAW,OAAO,UAAU;AAC1B,kBAAc;AAAA,MACZ,GAAG,IAAI;AAAA,MACP,GAAG,IAAI;AAAA,MACP,eAAe,IAAI;AAAA,MACnB,gBAAgB,IAAI;AAAA,MACpB,OAAO;AAAA,MACP,QAAQ,CAAC,OAAO,QAAQ;AAAA,MACxB,MAAM;AAAA,MACN,oBAAoB;AAAA,IACtB,CAAC;AAAA,EACH;AAGA,kBAAY,yBAAS,OAAO,UAAU,SAAS;AAE/C,SAAO,CAAC,WAAW,GAAG,iBAAiB,GAAG,UAAU,GAAG,UAAU;AACnE;;;AI1NA,IAAAC,gBAAoC;AACpC,4BAA0B;AAG1B,SAAS,gBAAgB,MAA6B;AACpD,SAAO,IAAI,QAAQ,CAAC,SAAS,WAAW;AACtC,UAAM,SAAS,IAAI,WAAW;AAC9B,WAAO,SAAS,MAAM;AACpB,cAAQ,OAAO,MAAgB;AAAA,IACjC;AACA,WAAO,UAAU;AACjB,WAAO,cAAc,IAAI;AAAA,EAC3B,CAAC;AACH;AAIO,IAAM,kBAAkB,CAC7B,SAIG;AACH,QAAM,CAAC,MAAM,OAAO,QAAI,wBAAmB,CAAC,CAAC;AAC7C,QAAM,CAAC,SAAS,UAAU,QAAI,wBAAS,IAAI;AAE3C,+BAAU,MAAM;AACd,QAAI,CAAC,KAAM;AACX,UAAM,eAAe,YAAY;AAC/B,iBAAW,IAAI;AACf,YAAM,aAAa,MAAM,QAAQ,IAAI,IAAI,OAAO,CAAC,IAAI;AAErD,YAAM,cAAc,WAAW,IAAI,OAAO,MAAM;AAC9C,cAAM,UAAU,sBAAAC,QAAc,UAAU,EAAE,QAAQ,KAAK,GAAG,CAAC,CAAC,CAAC;AAC7D,cAAM,WAAW,IAAI,KAAK,OAAO;AACjC,cAAM,SAAS,MAAM,gBAAgB,QAAQ;AAC7C,eAAO,EAAE,QAAQ,OAAO,EAAE,MAAO;AAAA,MACnC,CAAC;AAED,UAAI;AACF,cAAM,gBAAgB,MAAM,QAAQ,IAAI,WAAW;AACnD,gBAAQ,aAAa;AAAA,MACvB,SAAS,OAAO;AACd,gBAAQ,MAAM,0BAA0B,KAAK;AAC7C,gBAAQ,CAAC,CAAC;AAAA,MACZ,UAAE;AACA,mBAAW,KAAK;AAAA,MAClB;AAAA,IACF;AAEA,iBAAa;AAAA,EACf,GAAG,CAAC,IAAI,CAAC;AAET,SAAO,EAAE,MAAM,QAAQ;AACzB;;;ACtDA,mBAA0B;AAC1B,IAAAC,gBAAuB;AAEvB,0BAAgD;AAmB5C;AAjBG,SAAS,SAAS;AAAA,EACvB;AAAA,EACA;AAAA,EACA;AAAA,EACA,UAAU;AACZ,GAKG;AACD,QAAM,WAAO,wBAAU,+BAAW,MAAM;AACxC,QAAM,WAAO,sBAAmB;AAIhC,SACE,6CAAC,UAAK,KAAK,MACT;AAAA,gDAAC,eAAU,QAAQ,MAAM,QAAO,YAAW;AAAA,IAC3C;AAAA,MAAC;AAAA;AAAA,QACC;AAAA,QACA,aAAa,YAAY;AAAA,QACzB;AAAA;AAAA,IACF;AAAA,KAEF;AAEJ;;;AChCA,IAAAC,eAAoC;AACpC,IAAAC,gBAAiC;;;ACDjC;AAAA,EACE,MAAQ;AAAA,EACR,SAAW;AAAA,EACX,MAAQ;AAAA,EACR,OAAS;AAAA,IACP;AAAA,EACF;AAAA,EACA,SAAW;AAAA,IACT,OAAS;AAAA,IACT,WAAW;AAAA,IACX,OAAS;AAAA,IACT,YAAc;AAAA,IACd,SAAW;AAAA,IACX,WAAa;AAAA,IACb,mBAAmB;AAAA,IACnB,QAAU;AAAA,EACZ;AAAA,EACA,cAAgB;AAAA,IACd,mBAAmB;AAAA,IACnB,wBAAwB;AAAA,IACxB,yBAAyB;AAAA,IACzB,qBAAqB;AAAA,IACrB,sBAAsB;AAAA,IACtB,mBAAmB;AAAA,IACnB,0BAA0B;AAAA,IAC1B,mBAAmB;AAAA,IACnB,wBAAwB;AAAA,IACxB,gBAAgB;AAAA,IAChB,qBAAqB;AAAA,IACrB,eAAe;AAAA,IACf,iBAAiB;AAAA,IACjB,OAAS;AAAA,IACT,aAAa;AAAA,IACb,qBAAqB;AAAA,IACrB,OAAS;AAAA,IACT,gBAAgB;AAAA,EAClB;AAAA,EACA,iBAAmB;AAAA,IACjB,kBAAkB;AAAA,IAClB,4BAA4B;AAAA,IAC5B,+BAA+B;AAAA,IAC/B,iCAAiC;AAAA,IACjC,0BAA0B;AAAA,IAC1B,+BAA+B;AAAA,IAC/B,qBAAqB;AAAA,IACrB,2BAA2B;AAAA,IAC3B,oBAAoB;AAAA,IACpB,yBAAyB;AAAA,IACzB,mBAAmB;AAAA,IACnB,gBAAgB;AAAA,IAChB,oBAAoB;AAAA,IACpB,wBAAwB;AAAA,IACxB,gBAAgB;AAAA,IAChB,WAAa;AAAA,IACb,cAAc;AAAA,IACd,MAAQ;AAAA,IACR,YAAc;AAAA,IACd,MAAQ;AAAA,IACR,uBAAuB;AAAA,EACzB;AACF;;;AC5DA,kBAAqB;AACrB,IAAAC,gBAAyB;AACzB,IAAAC,gBAAuB;AACvB,YAAuB;AA4CnB,IAAAC,sBAAA;AArCJ,IAAI,OAAO,WAAW,aAAa;AACjC,SAAO,4BAA4B,IAAU,YAAM,GAAG,GAAG,CAAC;AAC5D;AAEA,SAAS,oBAAoB,gBAAgB,UAAU;AAErD,QAAM,aAAa,IAAU,iBAAW,EAAE;AAAA,IACxC,IAAU,YAAM,eAAe,GAAG,eAAe,GAAG,eAAe,CAAC;AAAA,EACtE;AAGA,QAAM,gBAAgB,IAAU,cAAQ,GAAG,GAAG,CAAC;AAG/C,gBAAc,gBAAgB,UAAU;AAGxC,QAAM,SAAS,cAAc,eAAe,QAAQ;AAEpD,SAAO;AACT;AAEO,IAAM,uBAAuB,CAAC,CAAC,MAAW;AAC/C,QAAM,UAAM,sBAAmB;AAC/B,QAAM,0BAAsB,sBAAO,EAAE,cAAc,IAAU,YAAM,EAAE,CAAC;AACtE,8BAAS,CAAC,OAAO,UAAU;AACzB,QAAI,CAAC,IAAI,QAAS;AAElB,UAAM,UAAU,OAAO;AAGvB,UAAM,iBAAiB,oBAAoB,SAAS,CAAC;AAErD,UAAM,OAAO,SAAS,KAAK,cAAc;AACzC,UAAM,OAAO,OAAO,GAAG,GAAG,CAAC;AAAA,EAC7B,CAAC;AACD,SACE,8CAAC,UAAK,KAAiB,UAAU,CAAC,KAAK,KAAK,GAAG,GAAG,CAAC,GACjD;AAAA,iDAAC,iBAAY,MAAM,CAAC,GAAG,GAAG,CAAC,GAAG;AAAA,IAC9B,6CAAC,0BAAqB,OAAM,SAAQ;AAAA,IACpC,6CAAC,oBAAK,UAAU,CAAC,GAAG,GAAG,IAAI,GAAG,UAAU,MAAM,OAAM,SAAQ,mBAE5D;AAAA,IACA;AAAA,MAAC;AAAA;AAAA,QACC,UAAU,CAAC,GAAG,GAAG,KAAK;AAAA,QACtB,UAAU;AAAA,QACV,OAAM;AAAA,QACN,UAAU,CAAC,GAAG,KAAK,IAAI,CAAC;AAAA,QACzB;AAAA;AAAA,IAED;AAAA,IACA;AAAA,MAAC;AAAA;AAAA,QACC,UAAU,CAAC,MAAM,GAAG,CAAC;AAAA,QACrB,UAAU;AAAA,QACV,OAAM;AAAA,QACN,UAAU,CAAC,GAAG,KAAK,KAAK,GAAG,CAAC;AAAA,QAC7B;AAAA;AAAA,IAED;AAAA,IACA;AAAA,MAAC;AAAA;AAAA,QACC,UAAU,CAAC,OAAO,GAAG,CAAC;AAAA,QACtB,UAAU;AAAA,QACV,OAAM;AAAA,QACN,UAAU,CAAC,GAAG,CAAC,KAAK,KAAK,GAAG,CAAC;AAAA,QAC9B;AAAA;AAAA,IAED;AAAA,IACA;AAAA,MAAC;AAAA;AAAA,QACC,UAAU,CAAC,GAAG,MAAM,CAAC;AAAA,QACrB,UAAU;AAAA,QACV,OAAM;AAAA,QACN,UAAU,CAAC,CAAC,KAAK,KAAK,GAAG,GAAG,CAAC;AAAA,QAC9B;AAAA;AAAA,IAED;AAAA,IACA;AAAA,MAAC;AAAA;AAAA,QACC,UAAU,CAAC,GAAG,OAAO,CAAC;AAAA,QACtB,UAAU;AAAA,QACV,OAAM;AAAA,QACN,UAAU,CAAC,KAAK,KAAK,GAAG,GAAG,CAAC;AAAA,QAC7B;AAAA;AAAA,IAED;AAAA,IACA;AAAA,MAAC;AAAA;AAAA,QACC,MAAM,CAAC,IAAU,oBAAc,IAAU,kBAAY,GAAG,GAAG,CAAC,CAAC,CAAC;AAAA,QAC9D,UACE,IAAU,wBAAkB;AAAA,UAC1B,OAAO;AAAA,UACP,WAAW;AAAA,QACb,CAAC;AAAA;AAAA,IAEL;AAAA,KACF;AAEJ;;;AF9FS,IAAAC,sBAAA;AALF,IAAM,kBAAkB,MAAM;AACnC,8BAAS,CAAC,EAAE,OAAO,MAAM;AACvB,WAAO,4BAA4B,OAAO;AAAA,EAC5C,CAAC;AAED,SAAO,6EAAE;AACX;AAEO,IAAM,qBAAqB,CAAC,EAAE,SAAS,MAAyB;AACrE,SACE,8CAAC,SAAI,OAAO,EAAE,UAAU,YAAY,OAAO,QAAQ,QAAQ,OAAO,GAChE;AAAA;AAAA,MAAC;AAAA;AAAA,QACC,OAAO;AAAA,UACL,UAAU;AAAA,UACV,KAAK;AAAA,UACL,MAAM;AAAA,UACN,OAAO;AAAA,UACP,QAAQ;AAAA,QACV;AAAA,QAEA;AAAA,UAAC;AAAA;AAAA,YACC,QAAQ;AAAA,cACN,IAAI,CAAC,GAAG,GAAG,CAAC;AAAA;AAAA;AAAA,cAGZ,UAAU,CAAC,GAAG,GAAG,CAAC;AAAA,YACpB;AAAA,YACA,OAAO,EAAE,QAAQ,GAAG;AAAA,YAEpB;AAAA,2DAAC,kBAAa,WAAW,KAAK,KAAK,GAAG;AAAA,cACtC,6CAAC,wBAAqB;AAAA;AAAA;AAAA,QACxB;AAAA;AAAA,IACF;AAAA,IACA;AAAA,MAAC;AAAA;AAAA,QACC,OAAO,EAAE,IAAI,CAAC,GAAG,GAAG,CAAC,EAAE;AAAA,QACvB,QAAQ,EAAE,IAAI,CAAC,GAAG,GAAG,CAAC,GAAG,UAAU,CAAC,GAAG,GAAG,CAAC,EAAE;AAAA,QAE7C;AAAA,uDAAC,mBAAgB;AAAA,UACjB,6CAAC,8BAAc,YAAU,MAAC,iBAAiB,GAAG;AAAA,UAC9C,6CAAC,kBAAa,WAAW,KAAK,KAAK,GAAG;AAAA,UACtC;AAAA,YAAC;AAAA;AAAA,cACC,UAAU,CAAC,KAAK,KAAK,EAAE;AAAA,cACvB,OAAO;AAAA,cACP,WAAW,KAAK,KAAK;AAAA;AAAA,UACvB;AAAA,UACA;AAAA,YAAC;AAAA;AAAA,cACC,UAAU,CAAC,KAAK,KAAK,GAAG,GAAG,CAAC;AAAA,cAC5B,cAAc;AAAA,cACd,UAAU;AAAA,cACV,aAAa;AAAA;AAAA,UACf;AAAA,UACC;AAAA;AAAA;AAAA,IACH;AAAA,IACA;AAAA,MAAC;AAAA;AAAA,QACC,OAAO;AAAA,UACL,UAAU;AAAA,UACV,OAAO;AAAA,UACP,QAAQ;AAAA,UACR,YAAY;AAAA,UACZ,OAAO;AAAA,UACP,kBAAkB;AAAA;AAAA;AAAA;AAAA,UAIlB,UAAU;AAAA,QACZ;AAAA,QACD;AAAA;AAAA,UACG,gBAAY;AAAA;AAAA;AAAA,IAChB;AAAA,KACF;AAEJ;;;AG5EA,IAAAC,eAAqB;AACrB,IAAAC,gBAA+C;AAC/C,IAAAC,gBAAiC;AAEjC,IAAAC,SAAuB;AA8DnB,IAAAC,sBAAA;AA5DJ,IAAM,uBAAuB,CAAC;AAAA,EAC5B;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,MAOM;AACJ,QAAM,CAAC,eAAe,gBAAgB,QAAI,wBAAmC;AAAA,IAC3E;AAAA,IAAG;AAAA,IAAG;AAAA,EACR,CAAC;AACD,QAAM,EAAE,OAAO,QAAI,wBAAS;AAC5B,QAAM,eAAW,sBAAO,IAAU,eAAQ,CAAC;AAG3C,8BAAS,MAAM;AACb,QAAI,WAAW;AAEb,YAAM,SAAS,IAAU;AAAA,QACvB,SAAS,QAAQ;AAAA,QACjB,SAAS,QAAQ;AAAA,QACjB;AAAA,MACF;AACA,aAAO,UAAU,MAAM;AACvB,uBAAiB,CAAC,OAAO,GAAG,OAAO,GAAG,OAAO,CAAC,CAAC;AAAA,IACjD;AAAA,EACF,CAAC;AAED,QAAM,aAAyB;AAAA,IAC7B,gBAAgB,CAAC,MAAM;AACrB,QAAE,gBAAgB;AAElB,eAAS,QAAQ;AAAA,QACd,EAAE,UAAU,OAAO,aAAc,IAAI;AAAA,QACtC,EAAE,EAAE,UAAU,OAAO,eAAe,IAAI;AAAA,MAC1C;AACA,cAAQ,WAAW;AAAA,IACrB;AAAA,IACA,eAAe,CAAC,MAAM;AACpB,QAAE,gBAAgB;AAElB,eAAS,QAAQ;AAAA,QACd,EAAE,UAAU,OAAO,aAAc,IAAI;AAAA,QACtC,EAAE,EAAE,UAAU,OAAO,eAAe,IAAI;AAAA,MAC1C;AAAA,IACF;AAAA,IACA,gBAAgB,CAAC,MAAM;AACrB,QAAE,gBAAgB;AAClB,cAAQ,IAAI;AAAA,IACd;AAAA,EACF;AAEA,SACE,8CAAC,WAAO,GAAG,YACR;AAAA;AAAA,IACA,aACC;AAAA,MAAC;AAAA;AAAA,QACC,UAAU;AAAA,QACV,OAAO;AAAA,UACL,YAAY;AAAA,UACZ,WAAW;AAAA,UACX,iBAAiB;AAAA,UACjB,SAAS;AAAA,UACT,cAAc;AAAA,UACd,eAAe;AAAA,QACjB;AAAA,QAEC;AAAA;AAAA,IACH;AAAA,KAEJ;AAEJ;AAEA,IAAO,+BAAQ;;;ACvFf,IAAAC,gBAAoC;AAEpC,IAAAC,uBAAqC;AAerC,IAAI,OAAO,WAAW,eAAe,CAAC,OAAO,4BAA4B;AACvE,SAAO,6BAA6B,oBAAI,IAAuB;AACjE;AAEO,SAAS,mBAAmB,KAA0C;AAC3E,QAAM,CAAC,KAAK,MAAM,QAAI,wBAA+B,IAAI;AAEzD,+BAAU,MAAM;AACd,QAAI,CAAC,IAAK;AAEV,UAAM,QAAQ,OAAO;AACrB,QAAI,gBAAgB;AAEpB,mBAAe,kBAAkB;AAC/B,UAAI;AACF,cAAM,WAAW,MAAM,MAAM,GAAI;AACjC,cAAM,OAAO,MAAM,SAAS,KAAK;AAEjC,cAAM,aAAa,KAChB,MAAM,uBAAuB,GAC5B,KAAK,IAAI,EACV,QAAQ,UAAU,MAAM;AAC3B,cAAM,aAAa,KAAK,QAAQ,yBAAyB,EAAE;AAE3D,cAAM,YAAY,IAAI,+BAAU;AAChC,kBAAU,mBAAmB;AAAA,UAC3B,kBAAkB;AAAA,QACpB,CAAC;AACD,cAAM,YAAY,UAAU;AAAA,UAC1B,WAAW;AAAA,YACT;AAAA,YACA;AAAA,UACF;AAAA,UACA;AAAA,QACF;AAEA,cAAM,YAAY,IAAI,+BAAU;AAChC,kBAAU,aAAa,SAAS;AAChC,eAAO,UAAU,MAAM,UAAU;AAAA,MACnC,SAAS,OAAO;AACd,eAAO;AAAA,MACT;AAAA,IACF;AAEA,aAAS,UAAU;AACjB,UAAI,MAAM,IAAI,GAAI,GAAG;AACnB,cAAM,YAAY,MAAM,IAAI,GAAI;AAChC,YAAI,UAAU,QAAQ;AAEpB,iBAAO,QAAQ,QAAQ,UAAU,OAAO,MAAM,CAAC;AAAA,QACjD;AAEA,eAAO,UAAU,QAAQ,KAAK,CAAC,WAAW,OAAO,MAAM,CAAC;AAAA,MAC1D;AAEA,YAAM,UAAU,gBAAgB,EAAE,KAAK,CAAC,WAAW;AACjD,YAAI,kBAAkB,OAAO;AAE3B,iBAAO;AAAA,QACT;AACA,cAAM,IAAI,KAAM,EAAE,GAAG,MAAM,IAAI,GAAI,GAAI,OAAO,CAAC;AAC/C,eAAO;AAAA,MACT,CAAC;AACD,YAAM,IAAI,KAAM,EAAE,SAAS,QAAQ,KAAK,CAAC;AACzC,aAAO;AAAA,IACT;AAEA,YAAQ,EACL,KAAK,CAAC,WAAW;AAChB,UAAI,cAAe;AACnB,aAAO,MAAM;AAAA,IACf,CAAC,EACA,MAAM,CAAC,UAAU;AAChB,cAAQ,MAAM,KAAK;AAAA,IACrB,CAAC;AAEH,WAAO,MAAM;AACX,sBAAgB;AAAA,IAClB;AAAA,EACF,GAAG,CAAC,GAAG,CAAC;AAER,SAAO;AACT;;;ACpEQ,IAAAC,sBAAA;AA3BD,SAAS,cAAc;AAAA,EAC5B;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,GAQG;AACD,QAAM,MAAM,mBAAmB,GAAG;AAElC,MAAI,CAAC,KAAK;AACR,WACE;AAAA,MAAC;AAAA;AAAA,QACC;AAAA,QACA;AAAA,QACA;AAAA,QACA;AAAA,QAEA,wDAAC,UAAK,UACJ;AAAA,uDAAC,iBAAY,MAAM,CAAC,KAAK,KAAK,GAAG,GAAG;AAAA,UACpC,6CAAC,0BAAqB,aAAW,MAAC,OAAM,OAAM,SAAS,MAAM;AAAA,WAC/D;AAAA;AAAA,IACF;AAAA,EAEJ;AAGA,MAAI,eAAe,OAAO;AACxB,WACE;AAAA,MAAC;AAAA;AAAA,QACC;AAAA,QACA;AAAA,QACA;AAAA,QACA;AAAA,QAEA,wDAAC,UAAK,UACJ;AAAA,uDAAC,iBAAY,MAAM,CAAC,KAAK,KAAK,GAAG,GAAG;AAAA,UACpC,6CAAC,0BAAqB,aAAW,MAAC,OAAM,OAAM,SAAS,KAAK;AAAA,UAC5D,6CAAC,uBAAkB,OAAM,OAAM;AAAA,WACjC;AAAA;AAAA,IACF;AAAA,EAEJ;AACA,SACE;AAAA,IAAC;AAAA;AAAA,MACC;AAAA,MACA;AAAA,MACA;AAAA,MACA;AAAA,MAEA,uDAAC,eAAU,UAAoB,UAAoB,QAAQ,KAAK;AAAA;AAAA,EAClE;AAEJ;;;ACjEA,2BAAuC;AACvC,sBAAkB;AAClB,yBAAsC;AACtC,IAAAC,SAAuB;AACvB,IAAAC,gBAAwB;AAmDlB,IAAAC,sBAAA;AAhDC,IAAM,aAAa,CAAC;AAAA,EACzB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,MAQM;AACJ,QAAM,EAAE,WAAW,SAAS,QAAI,uBAAQ,MAAM;AAC5C,UAAM,kBAAc,6CAAuB,gBAAAC,SAAc,SAAS;AAElE,UAAMC,iBAAY,0CAAsB,WAAW;AAEnD,UAAMC,YAAW,IAAU,4BAAqB;AAAA,MAC9C,cAAc;AAAA,MACd,MAAY;AAAA;AAAA,IACd,CAAC;AACD,WAAO,EAAE,WAAAD,YAAW,UAAAC,UAAS;AAAA,EAC/B,GAAG,CAAC,SAAS,CAAC;AACd,6BAAQ,MAAM;AACZ,QAAI,WAAW;AACb,YAAM,QAAQ,IAAU,aAAM,SAAS,MAAM,OAAO,CAAC;AACrD,eAAS,SAAS,KAAK,KAAK;AAC5B,eAAS,SAAS,OAAO,GAAG,GAAG,CAAC;AAChC,eAAS,oBAAoB;AAAA,IAC/B,OAAO;AACL,eAAS,oBAAoB;AAAA,IAC/B;AAAA,EACF,GAAG,CAAC,WAAW,QAAQ,CAAC;AACxB,MAAI,CAAC,UAAW,QAAO;AAEvB,SACE;AAAA,IAAC;AAAA;AAAA,MACC;AAAA,MACA;AAAA,MACA;AAAA,MACA;AAAA,MACA,UAAU;AAAA,MAEV;AAAA,QAAC;AAAA;AAAA,UACC,UAAU;AAAA,UACV;AAAA,UACA,UAAU;AAAA,UACV,UAAU;AAAA;AAAA,MACZ;AAAA;AAAA,EACF;AAEJ;;;AChEA,+BAA8B;AAC9B,IAAAC,sBAAoC;AACpC,IAAAC,wBAA6B;AAC7B,IAAAC,gBAAwB;AA2BR,IAAAC,sBAAA;AAxBhB,IAAM,EAAE,gBAAgB,QAAI,yCAAoB,kCAAmB;AAE5D,IAAM,mBAAmB,CAAC;AAAA,EAC/B;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,MAQM;AAEJ,QAAM,gBAAY,uBAAQ,MAAM;AAC9B,QAAI,CAAC,UAAW,QAAO;AACvB,UAAMC,aAAmB,CAAC;AAC1B,UAAM,OAAO,gBAAgBA,UAAS;AACtC,SAAK,OAAO,6CAAC,0CAAc,WAAsB,CAAE;AACnD,WAAOA;AAAA,EACT,GAAG,CAAC,SAAS,CAAC;AAEd,MAAI,CAAC,UAAW,QAAO;AAEvB,SACE,6EACG,oBAAU,IAAI,CAAC,MAAM,UACpB;AAAA,IAAC;AAAA;AAAA,MAGC;AAAA,MACA;AAAA,MACA,WAAW;AAAA,MACX;AAAA,MACA;AAAA,MACA;AAAA,MACA;AAAA;AAAA,IAPK;AAAA,EAQP,CACD,GACH;AAEJ;;;ACrDO,IAAM,QAAQ,IAAqB,SAAe;;;AfqCrD,IAAAC,sBAAA;AAjBG,IAAM,YAAY,CAAC,EAAE,MAAM,SAAS,MAAa;AACtD,QAAM,CAAC,kBAAkB,mBAAmB,QAAI,wBAAwB,IAAI;AAC5E,WAAS,yBAAyB,UAAU,IAAI;AAEhD,MAAI,CAAC,KAAM,QAAO;AAElB,QAAM,gBAAY,uBAAQ,MAAM;AAC9B,QAAI,CAAC,KAAK,KAAK,CAAC,MAAM,EAAE,SAAS,WAAW,EAAG,QAAO;AACtD,WAAO,wBAAwB,IAAI;AAAA,EACrC,GAAG,CAAC,IAAI,CAAC;AAET,QAAM,EAAE,MAAM,QAAQ,IAAI,gBAAgB,SAAS;AAEnD,QAAM,qBAAiB,sBAAG,IAAI,EAAE,cAAc,KAAK;AAGnD,SACE,8CAAC,sBACE;AAAA,SAAK,IAAI,CAAC,EAAE,QAAQ,MAAM,GAAG,UAC5B;AAAA,MAAC;AAAA;AAAA,QAEC;AAAA,QACA;AAAA,QACA,SAAS,UAAU,IAAI,OAAO;AAAA;AAAA,MAHzB;AAAA,IAIP,CACD;AAAA,IACA,eAAe,IAAI,CAAC,kBAAkB;AACrC,YAAM,oBAAgB,sBAAG,IAAI,EAAE,iBAAiB,SAAS;AAAA,QACvD,qBAAqB,cAAc;AAAA,MACrC,CAAC,GAAG;AACJ,YAAM,MAAM,cAAc,iBAAiB,cAAc;AACzD,YAAM,iBAAiB,cAAc,WACjC;AAAA,QACG,cAAc,SAAS,IAAI,KAAK,KAAM;AAAA,QACtC,cAAc,SAAS,IAAI,KAAK,KAAM;AAAA,QACtC,cAAc,SAAS,IAAI,KAAK,KAAM;AAAA,MACzC,IACA;AAEJ,UAAI,KAAK;AACP,eACE;AAAA,UAAC;AAAA;AAAA,YAEC;AAAA,YACA,UACE,cAAc,WACV;AAAA,cACE,cAAc,SAAS;AAAA,cACvB,cAAc,SAAS;AAAA,cACvB,cAAc,SAAS;AAAA,YACzB,IACA;AAAA,YAEN,UAAU;AAAA,YACV,aAAa,cAAc;AAAA,YAC3B,MAAM,iBAAiB,cAAc;AAAA,YACrC,SAAS;AAAA,YACT,WAAW,qBAAqB,cAAc;AAAA;AAAA,UAfzC,cAAc;AAAA,QAgBrB;AAAA,MAEJ;AAEA,UAAI,cAAc,aAAa;AAC7B,eACE;AAAA,UAAC;AAAA;AAAA,YAEC,WAAW,cAAc;AAAA,YACzB;AAAA,YACA,aAAa,cAAc;AAAA,YAC3B,MAAM,iBAAiB,cAAc;AAAA,YACrC,SAAS;AAAA,YACT,WAAW,qBAAqB,cAAc;AAAA;AAAA,UANzC,cAAc;AAAA,QAOrB;AAAA,MAEJ;AAEA,UAAI,cAAc,oBAAoB;AACpC,eACE;AAAA,UAAC;AAAA;AAAA,YACC,gBACE,cAAc,WACV;AAAA,cACE,cAAc,SAAS;AAAA,cACvB,cAAc,SAAS;AAAA,cACvB,cAAc,SAAS;AAAA,YACzB,IACA;AAAA,YAEN;AAAA,YACA,WAAW,cAAc;AAAA,YACzB,aAAa,cAAc;AAAA,YAC3B,MAAM,iBAAiB,cAAc;AAAA,YACrC,SAAS;AAAA,YACT,WAAW,qBAAqB,cAAc;AAAA;AAAA,QAChD;AAAA,MAEJ;AAAA,IACF,CAAC;AAAA,KACH;AAEJ;","names":["import_soup_util","import_react","import_transforms","import_primitives","import_colors","import_booleans","import_extrusions","import_primitives","import_react","stlSerializer","import_react","import_drei","import_fiber","import_fiber","import_react","import_jsx_runtime","import_jsx_runtime","import_drei","import_fiber","import_react","THREE","import_jsx_runtime","import_react","import_three_stdlib","import_jsx_runtime","THREE","import_react","import_jsx_runtime","jscad","threeGeom","material","import_jscad_fiber","import_jscad_planner","import_react","import_jsx_runtime","jscadPlan","import_jsx_runtime"]}
+{"version":3,"sources":["../src/index.tsx","../src/hooks/use-convert-children-to-soup.ts","../src/CadViewer.tsx","../src/soup-to-3d/index.ts","../src/geoms/plated-hole.ts","../src/geoms/constants.ts","../src/geoms/create-board-with-outline.ts","../src/hooks/use-stls-from-geom.ts","../src/three-components/STLModel.tsx","../src/CadViewerContainer.tsx","../package.json","../src/three-components/cube-with-labeled-sides.tsx","../src/ContainerWithTooltip.tsx","../src/hooks/use-global-obj-loader.ts","../src/three-components/MixedStlModel.tsx","../src/three-components/JscadModel.tsx","../src/three-components/FootprinterModel.tsx","../src/utils/tuple.ts"],"sourcesContent":["export { CadViewer } from \"./CadViewer\"\n","import { Circuit } from \"@tscircuit/core\"\nimport { useMemo } from \"react\"\nimport type { AnyCircuitElement } from \"circuit-json\"\n\nexport const useConvertChildrenToSoup = (\n  children?: any,\n  defaultSoup?: AnyCircuitElement[],\n): AnyCircuitElement[] => {\n  return useMemo(() => {\n    if (!children) return\n    const circuit = new Circuit()\n    circuit.add(children)\n    circuit.render()\n    return circuit.getCircuitJson() as any\n  }, [children])\n}\n","import type { AnySoupElement } from \"@tscircuit/soup\"\nimport { useConvertChildrenToSoup } from \"./hooks/use-convert-children-to-soup\"\nimport { su } from \"@tscircuit/soup-util\"\nimport { useMemo, useState } from \"react\"\nimport { createBoardGeomFromSoup } from \"./soup-to-3d\"\nimport { useStlsFromGeom } from \"./hooks/use-stls-from-geom\"\nimport { STLModel } from \"./three-components/STLModel\"\nimport { CadViewerContainer } from \"./CadViewerContainer\"\nimport { MixedStlModel } from \"./three-components/MixedStlModel\"\nimport { Euler } from \"three\"\nimport { JscadModel } from \"./three-components/JscadModel\"\nimport { Footprinter3d } from \"jscad-electronics\"\nimport { FootprinterModel } from \"./three-components/FootprinterModel\"\nimport { tuple } from \"./utils/tuple\"\n\ninterface Props {\n  soup?: AnySoupElement[]\n  children?: any\n}\n\nexport const CadViewer = ({ soup, children }: Props) => {\n  const [hoveredComponent, setHoveredComponent] = useState<{\n    id: string | null\n    name: string | null\n    mousePosition: [number, number, number] | null\n  }>({\n    id: null,\n    name: null,\n    mousePosition: null,\n  })\n  soup ??= useConvertChildrenToSoup(children, soup) as any\n\n  if (!soup) return null\n\n  const boardGeom = useMemo(() => {\n    if (!soup.some((e) => e.type === \"pcb_board\")) return null\n    return createBoardGeomFromSoup(soup)\n  }, [soup])\n\n  const { stls, loading } = useStlsFromGeom(boardGeom)\n\n  const cad_components = su(soup).cad_component.list()\n\n  const handleHover = (\n    componentId: string | null,\n    componentName?: string,\n    mousePosition?: [number, number, number],\n  ) => {\n    setHoveredComponent({\n      id: componentId,\n      name: componentName || null,\n      mousePosition: mousePosition || null,\n    })\n  }\n\n  return (\n    <CadViewerContainer hoveredComponent={hoveredComponent}>\n      {stls.map(({ stlUrl, color }, index) => (\n        <STLModel\n          key={stlUrl}\n          stlUrl={stlUrl}\n          color={color}\n          opacity={index === 0 ? 0.95 : 1}\n        />\n      ))}\n      {cad_components.map((cad_component) => {\n        const componentName = su(soup).source_component.getUsing({\n          source_component_id: cad_component.source_component_id,\n        })?.name\n        const url = cad_component.model_obj_url ?? cad_component.model_stl_url\n        const rotationOffset = cad_component.rotation\n          ? tuple(\n              (cad_component.rotation.x * Math.PI) / 180,\n              (cad_component.rotation.y * Math.PI) / 180,\n              (cad_component.rotation.z * Math.PI) / 180,\n            )\n          : undefined\n\n        if (url) {\n          return (\n            <MixedStlModel\n              key={cad_component.cad_component_id}\n              url={url}\n              position={\n                cad_component.position\n                  ? [\n                      cad_component.position.x,\n                      cad_component.position.y,\n                      cad_component.position.z,\n                    ]\n                  : undefined\n              }\n              rotation={rotationOffset}\n              componentId={cad_component.cad_component_id}\n              name={componentName || cad_component.cad_component_id}\n              onHover={handleHover}\n              isHovered={hoveredComponent.id === cad_component.cad_component_id}\n            />\n          )\n        }\n\n        if (cad_component.model_jscad) {\n          return (\n            <JscadModel\n              key={cad_component.cad_component_id}\n              jscadPlan={cad_component.model_jscad as any}\n              rotationOffset={rotationOffset}\n              componentId={cad_component.cad_component_id}\n              name={componentName || cad_component.cad_component_id}\n              onHover={handleHover}\n              isHovered={hoveredComponent.id === cad_component.cad_component_id}\n            />\n          )\n        }\n\n        if (cad_component.footprinter_string) {\n          return (\n            <FootprinterModel\n              positionOffset={\n                cad_component.position\n                  ? [\n                      cad_component.position.x,\n                      cad_component.position.y,\n                      cad_component.position.z,\n                    ]\n                  : undefined\n              }\n              rotationOffset={rotationOffset}\n              footprint={cad_component.footprinter_string}\n              componentId={cad_component.cad_component_id}\n              name={componentName || cad_component.cad_component_id}\n              onHover={handleHover}\n              isHovered={hoveredComponent.id === cad_component.cad_component_id}\n            />\n          )\n        }\n      })}\n    </CadViewerContainer>\n  )\n}\n","import type { Geom3 } from \"@jscad/modeling/src/geometries/types\"\nimport type { AnySoupElement, PCBPlatedHole } from \"@tscircuit/soup\"\nimport { su } from \"@tscircuit/soup-util\"\nimport { translate } from \"@jscad/modeling/src/operations/transforms\"\nimport { cuboid, cylinder, line } from \"@jscad/modeling/src/primitives\"\nimport { colorize } from \"@jscad/modeling/src/colors\"\nimport { subtract, union } from \"@jscad/modeling/src/operations/booleans\"\nimport { platedHole } from \"../geoms/plated-hole\"\nimport { M, colors } from \"../geoms/constants\"\nimport { extrudeLinear } from \"@jscad/modeling/src/operations/extrusions\"\nimport { expand } from \"@jscad/modeling/src/operations/expansions\"\nimport { createBoardWithOutline } from \"src/geoms/create-board-with-outline\"\n\nexport const createBoardGeomFromSoup = (soup: AnySoupElement[]): Geom3[] => {\n  const board = su(soup).pcb_board.list()[0]\n  if (!board) {\n    throw new Error(\"No pcb_board found\")\n  }\n  const plated_holes = su(soup).pcb_plated_hole.list()\n  const holes = su(soup).pcb_hole.list()\n  const pads = su(soup).pcb_smtpad.list()\n  const traces = su(soup).pcb_trace.list()\n  const pcb_vias = su(soup).pcb_via.list()\n\n  // PCB Board\n  let boardGeom: Geom3\n  if (board.outline && board.outline.length > 0)\n    boardGeom = createBoardWithOutline(board.outline, 1.2)\n  else boardGeom = cuboid({ size: [board.width, board.height, 1.2] })\n\n  const platedHoleGeoms: Geom3[] = []\n  const holeGeoms: Geom3[] = []\n  const padGeoms: Geom3[] = []\n  const traceGeoms: Geom3[] = []\n  const ctx = {\n    pcbThickness: 1.2,\n  }\n\n  const addPlatedHole = (plated_hole: PCBPlatedHole) => {\n    if (plated_hole.shape === \"circle\") {\n      const cyGeom = cylinder({\n        center: [plated_hole.x, plated_hole.y, 0],\n        radius: plated_hole.hole_diameter / 2 + M,\n      })\n\n      boardGeom = subtract(boardGeom, cyGeom)\n\n      const platedHoleGeom = platedHole(plated_hole, ctx)\n      platedHoleGeoms.push(platedHoleGeom)\n    } else if (plated_hole.shape === \"pill\") {\n      const shouldRotate = plated_hole.hole_height! > plated_hole.hole_width!\n\n      const holeWidth = shouldRotate\n        ? plated_hole.hole_height!\n        : plated_hole.hole_width!\n      const holeHeight = shouldRotate\n        ? plated_hole.hole_width!\n        : plated_hole.hole_height!\n\n      const holeRadius = holeHeight / 2\n      const rectLength = Math.abs(holeWidth - holeHeight)\n\n      const pillHole = union(\n        cuboid({\n          center: [plated_hole.x, plated_hole.y, 0],\n          size: shouldRotate\n            ? [holeHeight, rectLength, 1.5]\n            : [rectLength, holeHeight, 1.5],\n        }),\n        cylinder({\n          center: shouldRotate\n            ? [plated_hole.x, plated_hole.y - rectLength / 2, 0]\n            : [plated_hole.x - rectLength / 2, plated_hole.y, 0],\n          radius: holeRadius,\n          height: 1.5,\n        }),\n        cylinder({\n          center: shouldRotate\n            ? [plated_hole.x, plated_hole.y + rectLength / 2, 0]\n            : [plated_hole.x + rectLength / 2, plated_hole.y, 0],\n          radius: holeRadius,\n          height: 1.5,\n        }),\n      )\n      boardGeom = subtract(boardGeom, pillHole)\n\n      const platedHoleGeom = platedHole(plated_hole, ctx)\n      platedHoleGeoms.push(platedHoleGeom)\n    }\n  }\n\n  for (const plated_hole of plated_holes) {\n    addPlatedHole(plated_hole)\n  }\n\n  for (const hole of holes) {\n    // @ts-expect-error\n    if (hole.hole_shape === \"round\" || hole.hole_shape === \"circle\") {\n      const cyGeom = cylinder({\n        center: [hole.x, hole.y, 0],\n        radius: hole.hole_diameter / 2 + M,\n      })\n      boardGeom = subtract(boardGeom, cyGeom)\n    }\n  }\n\n  for (const pad of pads) {\n    const layerSign = pad.layer === \"bottom\" ? -1 : 1\n    if (pad.shape === \"rect\") {\n      const padGeom = colorize(\n        colors.copper,\n        cuboid({\n          center: [pad.x, pad.y, (layerSign * 1.2) / 2 + layerSign * M],\n          size: [pad.width, pad.height, M],\n        }),\n      )\n      padGeoms.push(padGeom)\n    } else if (pad.shape === \"circle\") {\n      const padGeom = colorize(\n        colors.copper,\n        cylinder({\n          center: [pad.x, pad.y, (layerSign * 1.2) / 2 + layerSign * M],\n          radius: pad.radius,\n          height: M,\n        }),\n      )\n      padGeoms.push(padGeom)\n    }\n  }\n\n  for (const { route: mixedRoute } of traces) {\n    if (mixedRoute.length < 2) continue\n\n    // Group routes by continuous segments\n    const routeSegments: (typeof mixedRoute)[] = []\n    let currentSegment: typeof mixedRoute = [mixedRoute[0]!]\n    let currentLayer =\n      mixedRoute[0]!.route_type === \"wire\" ? mixedRoute[0]!.layer : \"top\"\n\n    for (let i = 1; i < mixedRoute.length; i++) {\n      const point = mixedRoute[i]!\n\n      if (point.route_type === \"via\") {\n        // Complete current segment and start a new one\n        routeSegments.push(currentSegment)\n        currentSegment = [point]\n      } else if (point.route_type === \"wire\" && point.layer !== currentLayer) {\n        // Complete current segment and start a new one on a different layer\n        routeSegments.push(currentSegment)\n        currentLayer = point.layer\n        currentSegment = [point]\n      } else {\n        currentSegment.push(point)\n      }\n    }\n\n    // Add the last segment\n    routeSegments.push(currentSegment)\n\n    // Render each route segment\n    for (const route of routeSegments) {\n      if (route.length < 2) continue\n\n      const linePath = line(route.map((p) => [p.x, p.y]))\n      const layerSign =\n        route[0]!.route_type === \"via\"\n          ? route[0]!.to_layer === \"top\"\n            ? 1\n            : -1\n          : route[0]!.layer === \"top\"\n            ? 1\n            : -1\n\n      let traceGeom = translate(\n        [0, 0, (layerSign * 1.2) / 2],\n        extrudeLinear(\n          { height: M * layerSign },\n          expand({ delta: 0.1, corners: \"edge\" }, linePath),\n        ),\n      )\n\n      // Modify via subtraction to preserve trace geometry\n      const viaSubtractions = pcb_vias.map((via) =>\n        cylinder({\n          center: [via.x, via.y, 0],\n          radius: via.outer_diameter / 2,\n          height: 5,\n        }),\n      )\n\n      const holeSubtractions = plated_holes\n        .filter((ph) => ph.shape === \"circle\")\n        .map((ph) =>\n          cylinder({\n            center: [ph.x, ph.y, 0],\n            radius: ph.outer_diameter / 2,\n            height: 5,\n          }),\n        )\n\n      // Subtract vias and holes without removing entire trace\n      traceGeom = subtract(traceGeom, ...viaSubtractions, ...holeSubtractions)\n\n      traceGeom = colorize(colors.fr4GreenSolderWithMask, traceGeom)\n\n      traceGeoms.push(traceGeom)\n    }\n  }\n\n  for (const via of pcb_vias) {\n    addPlatedHole({\n      x: via.x,\n      y: via.y,\n      hole_diameter: via.hole_diameter,\n      outer_diameter: via.outer_diameter,\n      shape: \"circle\",\n      layers: [\"top\", \"bottom\"],\n      type: \"pcb_plated_hole\",\n      pcb_plated_hole_id: \"\",\n    })\n  }\n\n  // Colorize to a PCB green color: #05A32E\n  boardGeom = colorize(colors.fr4Green, boardGeom)\n\n  return [boardGeom, ...platedHoleGeoms, ...padGeoms, ...traceGeoms]\n}\n","import type { PCBPlatedHole } from \"@tscircuit/soup\"\nimport type { Geom3 } from \"@jscad/modeling/src/geometries/types\"\nimport { cuboid, cylinder } from \"@jscad/modeling/src/primitives\"\nimport { colorize } from \"@jscad/modeling/src/colors\"\nimport { subtract, union } from \"@jscad/modeling/src/operations/booleans\"\nimport { M, colors } from \"./constants\"\nimport type { GeomContext } from \"../GeomContext\"\n\nexport const platedHole = (\n  plated_hole: PCBPlatedHole,\n  ctx: GeomContext,\n): Geom3 => {\n  if (!(plated_hole as PCBPlatedHole).shape) plated_hole.shape = \"circle\"\n  if (plated_hole.shape === \"circle\") {\n    return colorize(\n      colors.copper,\n      subtract(\n        union(\n          cylinder({\n            center: [plated_hole.x, plated_hole.y, 0],\n            radius: plated_hole.hole_diameter / 2,\n            height: 1.2,\n          }),\n          cylinder({\n            center: [plated_hole.x, plated_hole.y, 1.2 / 2],\n            radius: plated_hole.outer_diameter / 2,\n            height: M,\n          }),\n          cylinder({\n            center: [plated_hole.x, plated_hole.y, -1.2 / 2],\n            radius: plated_hole.outer_diameter / 2,\n            height: M,\n          }),\n        ),\n        cylinder({\n          center: [plated_hole.x, plated_hole.y, 0],\n          radius: plated_hole.hole_diameter / 2 - M,\n          height: 1.5,\n        }),\n      ),\n    )\n  }\n  if (plated_hole.shape === \"pill\") {\n    const shouldRotate = plated_hole.hole_height! > plated_hole.hole_width!\n\n    const holeWidth = shouldRotate\n      ? plated_hole.hole_height!\n      : plated_hole.hole_width!\n    const holeHeight = shouldRotate\n      ? plated_hole.hole_width!\n      : plated_hole.hole_height!\n    const outerHeight = shouldRotate\n      ? plated_hole.outer_width || holeWidth + 0.2\n      : plated_hole.outer_height || holeHeight + 0.2\n\n    const holeRadius = holeHeight / 2\n    const rectLength = Math.abs(holeWidth - holeHeight)\n\n    const mainRect = cuboid({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y, 0]\n        : [plated_hole.x, plated_hole.y, 0],\n      size: shouldRotate\n        ? [holeHeight, rectLength, 1.2]\n        : [rectLength, holeHeight, 1.2],\n    })\n\n    const leftCap = cylinder({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y - rectLength / 2, 0]\n        : [plated_hole.x - rectLength / 2, plated_hole.y, 0],\n      radius: holeRadius,\n      height: 1.2,\n    })\n\n    const rightCap = cylinder({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y + rectLength / 2, 0]\n        : [plated_hole.x + rectLength / 2, plated_hole.y, 0],\n      radius: holeRadius,\n      height: 1.2,\n    })\n\n    const outerMainRect = cuboid({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y, 1.2 / 2]\n        : [plated_hole.x, plated_hole.y, 1.2 / 2],\n      size: shouldRotate\n        ? [outerHeight, rectLength, M]\n        : [rectLength, outerHeight, M],\n    })\n\n    const outerLeftCap = cylinder({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y - rectLength / 2, 1.2 / 2]\n        : [plated_hole.x - rectLength / 2, plated_hole.y, 1.2 / 2],\n      radius: outerHeight / 2,\n      height: M,\n    })\n\n    const outerRightCap = cylinder({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y + rectLength / 2, 1.2 / 2]\n        : [plated_hole.x + rectLength / 2, plated_hole.y, 1.2 / 2],\n      radius: outerHeight / 2,\n      height: M,\n    })\n\n    const bottomMainRect = cuboid({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y, -1.2 / 2]\n        : [plated_hole.x, plated_hole.y, -1.2 / 2],\n      size: shouldRotate\n        ? [outerHeight, rectLength, M]\n        : [rectLength, outerHeight, M],\n    })\n\n    const bottomLeftCap = cylinder({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y - rectLength / 2, -1.2 / 2]\n        : [plated_hole.x - rectLength / 2, plated_hole.y, -1.2 / 2],\n      radius: outerHeight / 2,\n      height: M,\n    })\n\n    const bottomRightCap = cylinder({\n      center: shouldRotate\n        ? [plated_hole.x, plated_hole.y + rectLength / 2, -1.2 / 2]\n        : [plated_hole.x + rectLength / 2, plated_hole.y, -1.2 / 2],\n      radius: outerHeight / 2,\n      height: M,\n    })\n    return colorize(\n      colors.copper,\n      subtract(\n        union(\n          mainRect,\n          leftCap,\n          rightCap,\n          outerMainRect,\n          outerLeftCap,\n          outerRightCap,\n          bottomMainRect,\n          bottomLeftCap,\n          bottomRightCap,\n        ),\n        union(\n          cuboid({\n            center: [plated_hole.x, plated_hole.y, 0],\n            size: shouldRotate\n              ? [holeHeight - M, rectLength, 1.5]\n              : [rectLength, holeHeight - M, 1.5],\n          }),\n          cylinder({\n            center: shouldRotate\n              ? [plated_hole.x, plated_hole.y - rectLength / 2, 0]\n              : [plated_hole.x - rectLength / 2, plated_hole.y, 0],\n            radius: holeRadius - M,\n            height: 1.5,\n          }),\n          cylinder({\n            center: shouldRotate\n              ? [plated_hole.x, plated_hole.y + rectLength / 2, 0]\n              : [plated_hole.x + rectLength / 2, plated_hole.y, 0],\n            radius: holeRadius - M,\n            height: 1.5,\n          }),\n        ),\n      ),\n    )\n    // biome-ignore lint/style/noUselessElse: <explanation>\n  } else {\n    throw new Error(`Unsupported plated hole shape: ${plated_hole.shape}`)\n  }\n}\n","import type { RGB } from \"@jscad/modeling/src/colors\"\n\nexport const M = 0.01\n\nexport const colors = {\n  copper: [0.9, 0.6, 0.2],\n  fr4Green: [0x05 / 255, 0xa3 / 255, 0x2e / 255],\n  fr4GreenSolderWithMask: [0x00 / 255, 0x98 / 255, 0x13 / 255],\n} satisfies Record<string, RGB>\n","import { extrudeLinear } from \"@jscad/modeling/src/operations/extrusions\"\nimport { polygon } from \"@jscad/modeling/src/primitives\"\nimport type { Geom2, Geom3 } from \"@jscad/modeling/src/geometries/types\"\nimport type { Vec2 } from \"@jscad/modeling/src/maths/types\"\nimport type { Point } from \"@tscircuit/soup\"\nimport { translate } from \"@jscad/modeling/src/operations/transforms\"\n\nconst arePointsClockwise = (points: Vec2[]): boolean => {\n  let area = 0\n  for (let i = 0; i < points.length; i++) {\n    const j = (i + 1) % points.length\n    area += points[i]![0] * points[j]![1]\n    area -= points[j]![0] * points[i]![1]\n  }\n  const signedArea = area / 2\n  return signedArea <= 0\n}\n\nexport const createBoardWithOutline = (points: Point[], depth = 1.2): Geom3 => {\n  let outline: Vec2[] = points.map((point) => [point.x, point.y])\n\n  if (arePointsClockwise(outline)) {\n    outline = outline.reverse()\n  }\n\n  const shape: Geom2 = polygon({ points: outline })\n\n  let board: Geom3 = extrudeLinear({ height: depth }, shape)\n\n  board = translate([0, 0, -depth / 2], board)\n\n  return board\n}\n","import { useState, useEffect } from \"react\"\nimport stlSerializer from \"@jscad/stl-serializer\"\nimport { Geom3 } from \"@jscad/modeling/src/geometries/types\"\n\nfunction blobToBase64Url(blob: Blob): Promise<string> {\n  return new Promise((resolve, reject) => {\n    const reader = new FileReader()\n    reader.onload = () => {\n      resolve(reader.result as string)\n    }\n    reader.onerror = reject\n    reader.readAsDataURL(blob)\n  })\n}\n\ntype StlObj = { stlUrl: string; color: number[] }\n\nexport const useStlsFromGeom = (\n  geom: Geom3[] | Geom3 | null,\n): {\n  stls: StlObj[]\n  loading: boolean\n} => {\n  const [stls, setStls] = useState<StlObj[]>([])\n  const [loading, setLoading] = useState(true)\n\n  useEffect(() => {\n    if (!geom) return\n    const generateStls = async () => {\n      setLoading(true)\n      const geometries = Array.isArray(geom) ? geom : [geom]\n\n      const stlPromises = geometries.map(async (g) => {\n        const rawData = stlSerializer.serialize({ binary: true }, [g])\n        const blobData = new Blob(rawData)\n        const stlUrl = await blobToBase64Url(blobData)\n        return { stlUrl, color: g.color! }\n      })\n\n      try {\n        const generatedStls = await Promise.all(stlPromises)\n        setStls(generatedStls)\n      } catch (error) {\n        console.error(\"Error generating STLs:\", error)\n        setStls([])\n      } finally {\n        setLoading(false)\n      }\n    }\n\n    generateStls()\n  }, [geom])\n\n  return { stls, loading }\n}\n","import { useLoader } from \"@react-three/fiber\"\nimport { useRef } from \"react\"\nimport * as THREE from \"three\"\nimport { MTLLoader, OBJLoader, STLLoader } from \"three-stdlib\"\n\nexport function STLModel({\n  stlUrl,\n  mtlUrl,\n  color,\n  opacity = 1,\n}: {\n  stlUrl: string\n  color?: any\n  mtlUrl?: string\n  opacity?: number\n}) {\n  const geom = useLoader(STLLoader, stlUrl)\n  const mesh = useRef<THREE.Mesh>()\n\n  // TODO handle mtl url\n\n  return (\n    <mesh ref={mesh as any}>\n      <primitive object={geom} attach=\"geometry\" />\n      <meshStandardMaterial\n        color={color}\n        transparent={opacity !== 1}\n        opacity={opacity}\n      />\n      {/* <Outlines thickness={0.05} color=\"black\" opacity={0.25} /> */}\n    </mesh>\n  )\n}\n","import { Grid, OrbitControls } from \"@react-three/drei\"\nimport { Canvas, useFrame } from \"@react-three/fiber\"\nimport packageJson from \"../package.json\"\nimport { CubeWithLabeledSides } from \"./three-components/cube-with-labeled-sides\"\n\nexport const RotationTracker = () => {\n  useFrame(({ camera }) => {\n    window.TSCI_MAIN_CAMERA_ROTATION = camera.rotation\n  })\n\n  return <></>\n}\n\nimport { Html } from \"@react-three/drei\"\n\nexport const CadViewerContainer = ({\n  children,\n  hoveredComponent,\n}: {\n  children: any\n  hoveredComponent: {\n    id: string | null\n    name: string | null\n    mousePosition: [number, number, number] | null\n  }\n}) => {\n  return (\n    <div style={{ position: \"relative\", width: \"100%\", height: \"100%\" }}>\n      <div\n        style={{\n          position: \"absolute\",\n          top: 0,\n          left: 0,\n          width: 120,\n          height: 120,\n        }}\n      >\n        <Canvas\n          camera={{\n            up: [0, 0, 1],\n            position: [1, 1, 1],\n          }}\n          style={{ zIndex: 10 }}\n        >\n          <ambientLight intensity={Math.PI / 2} />\n          <CubeWithLabeledSides />\n        </Canvas>\n      </div>\n      <Canvas\n        scene={{ up: [0, 0, 1] }}\n        camera={{ up: [0, 0, 1], position: [5, 5, 5] }}\n      >\n        <RotationTracker />\n        <OrbitControls autoRotate autoRotateSpeed={1} />\n        <ambientLight intensity={Math.PI / 2} />\n        <pointLight\n          position={[-10, -10, 10]}\n          decay={0}\n          intensity={Math.PI / 4}\n        />\n        <Grid\n          rotation={[Math.PI / 2, 0, 0]}\n          infiniteGrid={true}\n          cellSize={1}\n          sectionSize={10}\n        />\n        {children}\n        {hoveredComponent.id && hoveredComponent.mousePosition && (\n          <Html\n            position={hoveredComponent.mousePosition}\n            style={{\n              fontFamily: \"sans-serif\",\n              transform: \"translate3d(50%, 50%, 0)\",\n              backgroundColor: \"white\",\n              padding: \"5px\",\n              borderRadius: \"3px\",\n              pointerEvents: \"none\",\n            }}\n          >\n            {hoveredComponent.name}\n          </Html>\n        )}\n      </Canvas>\n      <div\n        style={{\n          position: \"absolute\",\n          right: 24,\n          bottom: 24,\n          fontFamily: \"sans-serif\",\n          color: \"white\",\n          WebkitTextStroke: \"0.5px rgba(0, 0, 0, 0.5)\",\n          fontSize: 11,\n        }}\n      >\n        @{packageJson.version}\n      </div>\n    </div>\n  )\n}\n","{\n  \"name\": \"@tscircuit/3d-viewer\",\n  \"version\": \"0.0.45\",\n  \"main\": \"./dist/index.js\",\n  \"files\": [\n    \"dist\"\n  ],\n  \"scripts\": {\n    \"start\": \"bun run storybook\",\n    \"dev:old\": \"bunx --bun vite\",\n    \"build\": \"tsup ./src/index.tsx --dts --sourcemap\",\n    \"prepublish\": \"npm run build\",\n    \"preview\": \"vite preview\",\n    \"storybook\": \"storybook dev -p 6006\",\n    \"build-storybook\": \"storybook build\",\n    \"format\": \"biome format . --write\"\n  },\n  \"dependencies\": {\n    \"@jscad/modeling\": \"^2.12.2\",\n    \"@jscad/regl-renderer\": \"^2.6.9\",\n    \"@jscad/stl-serializer\": \"^2.1.17\",\n    \"@react-three/drei\": \"^9.115.0\",\n    \"@react-three/fiber\": \"^8.16.8\",\n    \"@tscircuit/core\": \"^0.0.136\",\n    \"@tscircuit/react-fiber\": \"^1.1.29\",\n    \"@tscircuit/soup\": \"^0.0.69\",\n    \"@tscircuit/soup-util\": \"^0.0.26\",\n    \"@types/three\": \"^0.165.0\",\n    \"jscad-electronics\": \"^0.0.22\",\n    \"jscad-fiber\": \"^0.0.63\",\n    \"jscad-planner\": \"^0.0.7\",\n    \"react\": \"^18.3.1\",\n    \"react-dom\": \"^18.3.1\",\n    \"react-use-gesture\": \"^9.1.3\",\n    \"three\": \"^0.165.0\",\n    \"three-stdlib\": \"^2.30.3\"\n  },\n  \"devDependencies\": {\n    \"@biomejs/biome\": \"^1.8.3\",\n    \"@chromatic-com/storybook\": \"^1.5.0\",\n    \"@storybook/addon-essentials\": \"^8.1.10\",\n    \"@storybook/addon-interactions\": \"^8.1.10\",\n    \"@storybook/addon-links\": \"^8.1.10\",\n    \"@storybook/addon-onboarding\": \"^8.1.10\",\n    \"@storybook/blocks\": \"^8.1.10\",\n    \"@storybook/builder-vite\": \"^8.1.10\",\n    \"@storybook/react\": \"^8.1.10\",\n    \"@storybook/react-vite\": \"^8.1.10\",\n    \"@storybook/test\": \"^8.1.10\",\n    \"@types/react\": \"^18.3.3\",\n    \"@types/react-dom\": \"^18.3.0\",\n    \"@vitejs/plugin-react\": \"^4.3.1\",\n    \"circuit-json\": \"^0.0.77\",\n    \"storybook\": \"^8.1.10\",\n    \"strip-ansi\": \"^7.1.0\",\n    \"tsup\": \"^8.1.0\",\n    \"typescript\": \"^5.5.3\",\n    \"vite\": \"^5.3.1\",\n    \"vite-tsconfig-paths\": \"^4.3.2\"\n  }\n}\n","import { Text } from \"@react-three/drei\"\nimport { useFrame } from \"@react-three/fiber\"\nimport { useRef } from \"react\"\nimport * as THREE from \"three\"\n\ndeclare global {\n  interface Window {\n    TSCI_MAIN_CAMERA_ROTATION: THREE.Euler\n  }\n}\nif (typeof window !== \"undefined\") {\n  window.TSCI_MAIN_CAMERA_ROTATION = new THREE.Euler(0, 0, 0)\n}\n\nfunction computePointInFront(rotationVector, distance) {\n  // Create a quaternion from the rotation vector\n  const quaternion = new THREE.Quaternion().setFromEuler(\n    new THREE.Euler(rotationVector.x, rotationVector.y, rotationVector.z),\n  )\n\n  // Create a vector pointing forward (along the negative z-axis)\n  const forwardVector = new THREE.Vector3(0, 0, 1)\n\n  // Apply the rotation to the forward vector\n  forwardVector.applyQuaternion(quaternion)\n\n  // Scale the rotated vector by the distance\n  const result = forwardVector.multiplyScalar(distance)\n\n  return result\n}\n\nexport const CubeWithLabeledSides = ({}: any) => {\n  const ref = useRef<THREE.Mesh>()\n  const rotationTrackingRef = useRef({ lastRotation: new THREE.Euler() })\n  useFrame((state, delta) => {\n    if (!ref.current) return\n\n    const mainRot = window.TSCI_MAIN_CAMERA_ROTATION\n\n    // Use window.TSCI_CAMERA_ROTATION to compute the position of the camera\n    const cameraPosition = computePointInFront(mainRot, 2)\n\n    state.camera.position.copy(cameraPosition)\n    state.camera.lookAt(0, 0, 0)\n  })\n  return (\n    <mesh ref={ref as any} rotation={[Math.PI / 2, 0, 0]}>\n      <boxGeometry args={[1, 1, 1]} />\n      <meshStandardMaterial color=\"white\" />\n      <Text position={[0, 0, 0.51]} fontSize={0.25} color=\"black\">\n        Front\n      </Text>\n      <Text\n        position={[0, 0, -0.51]}\n        fontSize={0.25}\n        color=\"black\"\n        rotation={[0, Math.PI, 0]}\n      >\n        Back\n      </Text>\n      <Text\n        position={[0.51, 0, 0]}\n        fontSize={0.25}\n        color=\"black\"\n        rotation={[0, Math.PI / 2, 0]}\n      >\n        Right\n      </Text>\n      <Text\n        position={[-0.51, 0, 0]}\n        fontSize={0.25}\n        color=\"black\"\n        rotation={[0, -Math.PI / 2, 0]}\n      >\n        Left\n      </Text>\n      <Text\n        position={[0, 0.51, 0]}\n        fontSize={0.25}\n        color=\"black\"\n        rotation={[-Math.PI / 2, 0, 0]}\n      >\n        Top\n      </Text>\n      <Text\n        position={[0, -0.51, 0]}\n        fontSize={0.25}\n        color=\"black\"\n        rotation={[Math.PI / 2, 0, 0]}\n      >\n        Bottom\n      </Text>\n      <lineSegments\n        args={[new THREE.EdgesGeometry(new THREE.BoxGeometry(1, 1, 1))]}\n        material={\n          new THREE.LineBasicMaterial({\n            color: 0x000000,\n            linewidth: 2,\n          })\n        }\n      />\n    </mesh>\n  )\n}\n","import { Html } from \"@react-three/drei\"\nimport { GroupProps, useThree } from \"@react-three/fiber\"\nimport { useRef, useCallback } from \"react\"\nimport type { Vector3 } from \"three\"\nimport * as THREE from \"three\"\n\nconst ContainerWithTooltip = ({\n  children,\n  isHovered,\n  onHover,\n  componentId,\n  name,\n  position,\n}: {\n  children: React.ReactNode\n  componentId: string\n  name: string\n  position?: Vector3 | [number, number, number]\n  onHover: (\n    id: string | null,\n    name?: string,\n    mousePosition?: [number, number, number],\n  ) => void\n  isHovered: boolean\n}) => {\n  const lastValidPointRef = useRef<THREE.Vector3 | null>(null)\n\n  const handlePointerEnter = useCallback(\n    (e: any) => {\n      e.stopPropagation()\n\n      try {\n        // Fallback to event position if raycaster fails\n        const point =\n          e.point ||\n          (e.intersections && e.intersections.length > 0\n            ? e.intersections[0].point\n            : null) ||\n          (position\n            ? new THREE.Vector3(...(position as [number, number, number]))\n            : null)\n\n        if (point) {\n          lastValidPointRef.current = point\n          onHover(componentId, name, [point.x, point.y, point.z])\n        } else {\n          onHover(componentId, name)\n        }\n      } catch (error) {\n        console.warn(\"Hover event error:\", error)\n        onHover(componentId, name)\n      }\n    },\n    [componentId, name, onHover, position],\n  )\n\n  const handlePointerLeave = useCallback(\n    (e: any) => {\n      e.stopPropagation()\n      lastValidPointRef.current = null\n      onHover(null)\n    },\n    [onHover],\n  )\n\n  const groupProps: GroupProps = {\n    onPointerEnter: handlePointerEnter,\n    onPointerMove: handlePointerEnter,\n    onPointerLeave: handlePointerLeave,\n  }\n\n  return <group {...groupProps}>{children}</group>\n}\n\nexport default ContainerWithTooltip\n","import { useState, useEffect } from \"react\"\nimport type { Group } from \"three\"\nimport { MTLLoader, OBJLoader } from \"three-stdlib\"\n\n// Define the type for our cache\ninterface CacheItem {\n  promise: Promise<any>\n  result: Group | null\n}\n\ndeclare global {\n  interface Window {\n    TSCIRCUIT_OBJ_LOADER_CACHE: Map<string, CacheItem>\n  }\n}\n\n// Ensure the global cache exists\nif (typeof window !== \"undefined\" && !window.TSCIRCUIT_OBJ_LOADER_CACHE) {\n  window.TSCIRCUIT_OBJ_LOADER_CACHE = new Map<string, CacheItem>()\n}\n\nexport function useGlobalObjLoader(url: string | null): Group | null | Error {\n  const [obj, setObj] = useState<Group | null | Error>(null)\n\n  useEffect(() => {\n    if (!url) return\n\n    const cache = window.TSCIRCUIT_OBJ_LOADER_CACHE\n    let hasUrlChanged = false\n\n    async function loadAndParseObj() {\n      try {\n        const response = await fetch(url!)\n        const text = await response.text()\n\n        const mtlContent = text\n          .match(/newmtl[\\s\\S]*?endmtl/g)\n          ?.join(\"\\n\")!\n          .replace(/d 0\\./g, \"d 1.\")!\n        const objContent = text.replace(/newmtl[\\s\\S]*?endmtl/g, \"\")\n\n        const mtlLoader = new MTLLoader()\n        mtlLoader.setMaterialOptions({\n          invertTrProperty: true,\n        })\n        const materials = mtlLoader.parse(\n          mtlContent.replace(\n            /Kd\\s+([\\d.]+)\\s+([\\d.]+)\\s+([\\d.]+)/g,\n            \"Kd $2 $2 $2\",\n          ),\n          \"test.mtl\",\n        )\n\n        const objLoader = new OBJLoader()\n        objLoader.setMaterials(materials)\n        return objLoader.parse(objContent)\n      } catch (error) {\n        return error as Error\n      }\n    }\n\n    function loadUrl() {\n      if (cache.has(url!)) {\n        const cacheItem = cache.get(url!)!\n        if (cacheItem.result) {\n          // If we have a result, clone it\n          return Promise.resolve(cacheItem.result.clone())\n        }\n        // If we're still loading, return the existing promise\n        return cacheItem.promise.then((result) => result.clone())\n      }\n      // If it's not in the cache, create a new promise and cache it\n      const promise = loadAndParseObj().then((result) => {\n        if (result instanceof Error) {\n          // If the result is an Error, return it\n          return result\n        }\n        cache.set(url!, { ...cache.get(url!)!, result })\n        return result\n      })\n      cache.set(url!, { promise, result: null })\n      return promise\n    }\n\n    loadUrl()\n      .then((result) => {\n        if (hasUrlChanged) return\n        setObj(result)\n      })\n      .catch((error) => {\n        console.error(error)\n      })\n\n    return () => {\n      hasUrlChanged = true\n    }\n  }, [url])\n\n  return obj\n}\n","import ContainerWithTooltip from \"src/ContainerWithTooltip\"\nimport { useGlobalObjLoader } from \"src/hooks/use-global-obj-loader\"\nimport type { Euler, Vector3 } from \"three\"\n\nexport function MixedStlModel({\n  url,\n  position,\n  rotation,\n  componentId,\n  name,\n  onHover,\n  isHovered,\n}: {\n  url: string\n  position?: Vector3 | [number, number, number]\n  rotation?: Euler | [number, number, number]\n  componentId: string\n  name: string\n  onHover: (id: string | null) => void\n  isHovered: boolean\n}) {\n  const obj = useGlobalObjLoader(url)\n\n  if (!obj) {\n    return (\n      <ContainerWithTooltip\n        componentId={componentId}\n        name={name}\n        isHovered={isHovered}\n        onHover={onHover}\n      >\n        <mesh position={position}>\n          <boxGeometry args={[0.5, 0.5, 0.5]} />\n          <meshStandardMaterial transparent color=\"red\" opacity={0.25} />\n        </mesh>\n      </ContainerWithTooltip>\n    )\n  }\n\n  // Check if obj is valid before rendering\n  if (obj instanceof Error) {\n    return (\n      <ContainerWithTooltip\n        componentId={componentId}\n        name={name}\n        isHovered={isHovered}\n        onHover={onHover}\n      >\n        <mesh position={position}>\n          <boxGeometry args={[0.5, 0.5, 0.5]} />\n          <meshStandardMaterial transparent color=\"red\" opacity={0.5} />\n          <meshBasicMaterial color=\"red\" />\n        </mesh>\n      </ContainerWithTooltip>\n    )\n  }\n  return (\n    <ContainerWithTooltip\n      componentId={componentId}\n      name={name}\n      isHovered={isHovered}\n      onHover={onHover}\n    >\n      <primitive rotation={rotation} position={position} object={obj} />\n    </ContainerWithTooltip>\n  )\n}\n","import type { JscadOperation } from \"jscad-planner\"\nimport { executeJscadOperations } from \"jscad-planner\"\nimport jscad from \"@jscad/modeling\"\nimport { convertCSGToThreeGeom } from \"jscad-fiber\"\nimport * as THREE from \"three\"\nimport { useMemo } from \"react\"\nimport ContainerWithTooltip from \"src/ContainerWithTooltip\"\n\nexport const JscadModel = ({\n  jscadPlan,\n  positionOffset,\n  rotationOffset,\n  componentId,\n  name,\n  onHover,\n  isHovered,\n}: {\n  jscadPlan: JscadOperation\n  positionOffset?: [number, number, number]\n  rotationOffset?: [number, number, number]\n  componentId: string\n  name: string\n  onHover: (id: string | null) => void\n  isHovered: boolean\n}) => {\n  const { threeGeom, material } = useMemo(() => {\n    const jscadObject = executeJscadOperations(jscad as any, jscadPlan)\n\n    const threeGeom = convertCSGToThreeGeom(jscadObject)\n\n    const material = new THREE.MeshStandardMaterial({\n      vertexColors: true,\n      side: THREE.DoubleSide, // Ensure both sides are visible\n    })\n    return { threeGeom, material }\n  }, [jscadPlan])\n  useMemo(() => {\n    if (isHovered) {\n      const color = new THREE.Color(material.color.getHex())\n      material.emissive.copy(color)\n      material.emissive.setRGB(0, 0, 1)\n      material.emissiveIntensity = 0.2\n    } else {\n      material.emissiveIntensity = 0\n    }\n  }, [isHovered, material])\n  if (!threeGeom) return null\n\n  return (\n    <ContainerWithTooltip\n      componentId={componentId}\n      name={name}\n      isHovered={isHovered}\n      onHover={onHover}\n      position={positionOffset}\n    >\n      <mesh\n        geometry={threeGeom}\n        material={material}\n        position={positionOffset}\n        rotation={rotationOffset}\n      />\n    </ContainerWithTooltip>\n  )\n}\n","import { Footprinter3d } from \"jscad-electronics\"\nimport { createJSCADRenderer } from \"jscad-fiber\"\nimport { jscadPlanner } from \"jscad-planner\"\nimport { useMemo } from \"react\"\nimport { JscadModel } from \"./JscadModel\"\n\nconst { createJSCADRoot } = createJSCADRenderer(jscadPlanner as any)\n\nexport const FootprinterModel = ({\n  positionOffset,\n  footprint,\n  rotationOffset,\n  componentId,\n  name,\n  onHover,\n  isHovered,\n}: {\n  positionOffset: any\n  footprint: string\n  rotationOffset?: [number, number, number]\n  componentId: string\n  name: string\n  onHover: (id: string | null) => void\n  isHovered: boolean\n}) => {\n  // biome-ignore lint/correctness/useExhaustiveDependencies: <explanation>\n  const jscadPlan = useMemo(() => {\n    if (!footprint) return null\n    const jscadPlan: any[] = []\n    const root = createJSCADRoot(jscadPlan)\n    root.render(<Footprinter3d footprint={footprint} />)\n    return jscadPlan\n  }, [footprint])\n\n  if (!jscadPlan) return null\n\n  return (\n    <>\n      {jscadPlan.map((plan, index) => (\n        <JscadModel\n          // biome-ignore lint/suspicious/noArrayIndexKey: <explanation>\n          key={index}\n          positionOffset={positionOffset}\n          rotationOffset={rotationOffset}\n          jscadPlan={plan}\n          componentId={componentId}\n          name={name}\n          onHover={onHover}\n          isHovered={isHovered}\n        />\n      ))}\n    </>\n  )\n}\n","export const tuple = <T extends any[]>(...args: T): T => args\n"],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA;AAAA;AAAA;AAAA;AAAA;;;ACAA,kBAAwB;AACxB,mBAAwB;AAGjB,IAAM,2BAA2B,CACtC,UACA,gBACwB;AACxB,aAAO,sBAAQ,MAAM;AACnB,QAAI,CAAC,SAAU;AACf,UAAM,UAAU,IAAI,oBAAQ;AAC5B,YAAQ,IAAI,QAAQ;AACpB,YAAQ,OAAO;AACf,WAAO,QAAQ,eAAe;AAAA,EAChC,GAAG,CAAC,QAAQ,CAAC;AACf;;;ACbA,IAAAA,oBAAmB;AACnB,IAAAC,gBAAkC;;;ACDlC,uBAAmB;AACnB,IAAAC,qBAA0B;AAC1B,IAAAC,qBAAuC;AACvC,IAAAC,iBAAyB;AACzB,IAAAC,mBAAgC;;;ACJhC,wBAAiC;AACjC,oBAAyB;AACzB,sBAAgC;;;ACFzB,IAAM,IAAI;AAEV,IAAM,SAAS;AAAA,EACpB,QAAQ,CAAC,KAAK,KAAK,GAAG;AAAA,EACtB,UAAU,CAAC,IAAO,KAAK,MAAO,KAAK,KAAO,GAAG;AAAA,EAC7C,wBAAwB,CAAC,IAAO,KAAK,MAAO,KAAK,KAAO,GAAG;AAC7D;;;ADAO,IAAM,aAAa,CACxB,aACA,QACU;AACV,MAAI,CAAE,YAA8B,MAAO,aAAY,QAAQ;AAC/D,MAAI,YAAY,UAAU,UAAU;AAClC,eAAO;AAAA,MACL,OAAO;AAAA,UACP;AAAA,YACE;AAAA,cACE,4BAAS;AAAA,YACP,QAAQ,CAAC,YAAY,GAAG,YAAY,GAAG,CAAC;AAAA,YACxC,QAAQ,YAAY,gBAAgB;AAAA,YACpC,QAAQ;AAAA,UACV,CAAC;AAAA,cACD,4BAAS;AAAA,YACP,QAAQ,CAAC,YAAY,GAAG,YAAY,GAAG,MAAM,CAAC;AAAA,YAC9C,QAAQ,YAAY,iBAAiB;AAAA,YACrC,QAAQ;AAAA,UACV,CAAC;AAAA,cACD,4BAAS;AAAA,YACP,QAAQ,CAAC,YAAY,GAAG,YAAY,GAAG,OAAO,CAAC;AAAA,YAC/C,QAAQ,YAAY,iBAAiB;AAAA,YACrC,QAAQ;AAAA,UACV,CAAC;AAAA,QACH;AAAA,YACA,4BAAS;AAAA,UACP,QAAQ,CAAC,YAAY,GAAG,YAAY,GAAG,CAAC;AAAA,UACxC,QAAQ,YAAY,gBAAgB,IAAI;AAAA,UACxC,QAAQ;AAAA,QACV,CAAC;AAAA,MACH;AAAA,IACF;AAAA,EACF;AACA,MAAI,YAAY,UAAU,QAAQ;AAChC,UAAM,eAAe,YAAY,cAAe,YAAY;AAE5D,UAAM,YAAY,eACd,YAAY,cACZ,YAAY;AAChB,UAAM,aAAa,eACf,YAAY,aACZ,YAAY;AAChB,UAAM,cAAc,eAChB,YAAY,eAAe,YAAY,MACvC,YAAY,gBAAgB,aAAa;AAE7C,UAAM,aAAa,aAAa;AAChC,UAAM,aAAa,KAAK,IAAI,YAAY,UAAU;AAElD,UAAM,eAAW,0BAAO;AAAA,MACtB,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,GAAG,CAAC,IAChC,CAAC,YAAY,GAAG,YAAY,GAAG,CAAC;AAAA,MACpC,MAAM,eACF,CAAC,YAAY,YAAY,GAAG,IAC5B,CAAC,YAAY,YAAY,GAAG;AAAA,IAClC,CAAC;AAED,UAAM,cAAU,4BAAS;AAAA,MACvB,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,CAAC,IACjD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,CAAC;AAAA,MACrD,QAAQ;AAAA,MACR,QAAQ;AAAA,IACV,CAAC;AAED,UAAM,eAAW,4BAAS;AAAA,MACxB,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,CAAC,IACjD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,CAAC;AAAA,MACrD,QAAQ;AAAA,MACR,QAAQ;AAAA,IACV,CAAC;AAED,UAAM,oBAAgB,0BAAO;AAAA,MAC3B,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,GAAG,MAAM,CAAC,IACtC,CAAC,YAAY,GAAG,YAAY,GAAG,MAAM,CAAC;AAAA,MAC1C,MAAM,eACF,CAAC,aAAa,YAAY,CAAC,IAC3B,CAAC,YAAY,aAAa,CAAC;AAAA,IACjC,CAAC;AAED,UAAM,mBAAe,4BAAS;AAAA,MAC5B,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,MAAM,CAAC,IACvD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,MAAM,CAAC;AAAA,MAC3D,QAAQ,cAAc;AAAA,MACtB,QAAQ;AAAA,IACV,CAAC;AAED,UAAM,oBAAgB,4BAAS;AAAA,MAC7B,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,MAAM,CAAC,IACvD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,MAAM,CAAC;AAAA,MAC3D,QAAQ,cAAc;AAAA,MACtB,QAAQ;AAAA,IACV,CAAC;AAED,UAAM,qBAAiB,0BAAO;AAAA,MAC5B,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,GAAG,OAAO,CAAC,IACvC,CAAC,YAAY,GAAG,YAAY,GAAG,OAAO,CAAC;AAAA,MAC3C,MAAM,eACF,CAAC,aAAa,YAAY,CAAC,IAC3B,CAAC,YAAY,aAAa,CAAC;AAAA,IACjC,CAAC;AAED,UAAM,oBAAgB,4BAAS;AAAA,MAC7B,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,OAAO,CAAC,IACxD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,OAAO,CAAC;AAAA,MAC5D,QAAQ,cAAc;AAAA,MACtB,QAAQ;AAAA,IACV,CAAC;AAED,UAAM,qBAAiB,4BAAS;AAAA,MAC9B,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,OAAO,CAAC,IACxD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,OAAO,CAAC;AAAA,MAC5D,QAAQ,cAAc;AAAA,MACtB,QAAQ;AAAA,IACV,CAAC;AACD,eAAO;AAAA,MACL,OAAO;AAAA,UACP;AAAA,YACE;AAAA,UACE;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,QACF;AAAA,YACA;AAAA,cACE,0BAAO;AAAA,YACL,QAAQ,CAAC,YAAY,GAAG,YAAY,GAAG,CAAC;AAAA,YACxC,MAAM,eACF,CAAC,aAAa,GAAG,YAAY,GAAG,IAChC,CAAC,YAAY,aAAa,GAAG,GAAG;AAAA,UACtC,CAAC;AAAA,cACD,4BAAS;AAAA,YACP,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,CAAC,IACjD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,CAAC;AAAA,YACrD,QAAQ,aAAa;AAAA,YACrB,QAAQ;AAAA,UACV,CAAC;AAAA,cACD,4BAAS;AAAA,YACP,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,CAAC,IACjD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,CAAC;AAAA,YACrD,QAAQ,aAAa;AAAA,YACrB,QAAQ;AAAA,UACV,CAAC;AAAA,QACH;AAAA,MACF;AAAA,IACF;AAAA,EAEF,OAAO;AACL,UAAM,IAAI,MAAM,kCAAkC,YAAY,KAAK,EAAE;AAAA,EACvE;AACF;;;ADrKA,IAAAC,qBAA8B;AAC9B,wBAAuB;;;AGVvB,wBAA8B;AAC9B,IAAAC,qBAAwB;AAIxB,wBAA0B;AAE1B,IAAM,qBAAqB,CAAC,WAA4B;AACtD,MAAI,OAAO;AACX,WAAS,IAAI,GAAG,IAAI,OAAO,QAAQ,KAAK;AACtC,UAAM,KAAK,IAAI,KAAK,OAAO;AAC3B,YAAQ,OAAO,CAAC,EAAG,CAAC,IAAI,OAAO,CAAC,EAAG,CAAC;AACpC,YAAQ,OAAO,CAAC,EAAG,CAAC,IAAI,OAAO,CAAC,EAAG,CAAC;AAAA,EACtC;AACA,QAAM,aAAa,OAAO;AAC1B,SAAO,cAAc;AACvB;AAEO,IAAM,yBAAyB,CAAC,QAAiB,QAAQ,QAAe;AAC7E,MAAI,UAAkB,OAAO,IAAI,CAAC,UAAU,CAAC,MAAM,GAAG,MAAM,CAAC,CAAC;AAE9D,MAAI,mBAAmB,OAAO,GAAG;AAC/B,cAAU,QAAQ,QAAQ;AAAA,EAC5B;AAEA,QAAM,YAAe,4BAAQ,EAAE,QAAQ,QAAQ,CAAC;AAEhD,MAAI,YAAe,iCAAc,EAAE,QAAQ,MAAM,GAAG,KAAK;AAEzD,cAAQ,6BAAU,CAAC,GAAG,GAAG,CAAC,QAAQ,CAAC,GAAG,KAAK;AAE3C,SAAO;AACT;;;AHnBO,IAAM,0BAA0B,CAAC,SAAoC;AAC1E,QAAM,YAAQ,qBAAG,IAAI,EAAE,UAAU,KAAK,EAAE,CAAC;AACzC,MAAI,CAAC,OAAO;AACV,UAAM,IAAI,MAAM,oBAAoB;AAAA,EACtC;AACA,QAAM,mBAAe,qBAAG,IAAI,EAAE,gBAAgB,KAAK;AACnD,QAAM,YAAQ,qBAAG,IAAI,EAAE,SAAS,KAAK;AACrC,QAAM,WAAO,qBAAG,IAAI,EAAE,WAAW,KAAK;AACtC,QAAM,aAAS,qBAAG,IAAI,EAAE,UAAU,KAAK;AACvC,QAAM,eAAW,qBAAG,IAAI,EAAE,QAAQ,KAAK;AAGvC,MAAI;AACJ,MAAI,MAAM,WAAW,MAAM,QAAQ,SAAS;AAC1C,gBAAY,uBAAuB,MAAM,SAAS,GAAG;AAAA,MAClD,iBAAY,2BAAO,EAAE,MAAM,CAAC,MAAM,OAAO,MAAM,QAAQ,GAAG,EAAE,CAAC;AAElE,QAAM,kBAA2B,CAAC;AAClC,QAAM,YAAqB,CAAC;AAC5B,QAAM,WAAoB,CAAC;AAC3B,QAAM,aAAsB,CAAC;AAC7B,QAAM,MAAM;AAAA,IACV,cAAc;AAAA,EAChB;AAEA,QAAM,gBAAgB,CAAC,gBAA+B;AACpD,QAAI,YAAY,UAAU,UAAU;AAClC,YAAM,aAAS,6BAAS;AAAA,QACtB,QAAQ,CAAC,YAAY,GAAG,YAAY,GAAG,CAAC;AAAA,QACxC,QAAQ,YAAY,gBAAgB,IAAI;AAAA,MAC1C,CAAC;AAED,sBAAY,2BAAS,WAAW,MAAM;AAEtC,YAAM,iBAAiB,WAAW,aAAa,GAAG;AAClD,sBAAgB,KAAK,cAAc;AAAA,IACrC,WAAW,YAAY,UAAU,QAAQ;AACvC,YAAM,eAAe,YAAY,cAAe,YAAY;AAE5D,YAAM,YAAY,eACd,YAAY,cACZ,YAAY;AAChB,YAAM,aAAa,eACf,YAAY,aACZ,YAAY;AAEhB,YAAM,aAAa,aAAa;AAChC,YAAM,aAAa,KAAK,IAAI,YAAY,UAAU;AAElD,YAAM,eAAW;AAAA,YACf,2BAAO;AAAA,UACL,QAAQ,CAAC,YAAY,GAAG,YAAY,GAAG,CAAC;AAAA,UACxC,MAAM,eACF,CAAC,YAAY,YAAY,GAAG,IAC5B,CAAC,YAAY,YAAY,GAAG;AAAA,QAClC,CAAC;AAAA,YACD,6BAAS;AAAA,UACP,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,CAAC,IACjD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,CAAC;AAAA,UACrD,QAAQ;AAAA,UACR,QAAQ;AAAA,QACV,CAAC;AAAA,YACD,6BAAS;AAAA,UACP,QAAQ,eACJ,CAAC,YAAY,GAAG,YAAY,IAAI,aAAa,GAAG,CAAC,IACjD,CAAC,YAAY,IAAI,aAAa,GAAG,YAAY,GAAG,CAAC;AAAA,UACrD,QAAQ;AAAA,UACR,QAAQ;AAAA,QACV,CAAC;AAAA,MACH;AACA,sBAAY,2BAAS,WAAW,QAAQ;AAExC,YAAM,iBAAiB,WAAW,aAAa,GAAG;AAClD,sBAAgB,KAAK,cAAc;AAAA,IACrC;AAAA,EACF;AAEA,aAAW,eAAe,cAAc;AACtC,kBAAc,WAAW;AAAA,EAC3B;AAEA,aAAW,QAAQ,OAAO;AAExB,QAAI,KAAK,eAAe,WAAW,KAAK,eAAe,UAAU;AAC/D,YAAM,aAAS,6BAAS;AAAA,QACtB,QAAQ,CAAC,KAAK,GAAG,KAAK,GAAG,CAAC;AAAA,QAC1B,QAAQ,KAAK,gBAAgB,IAAI;AAAA,MACnC,CAAC;AACD,sBAAY,2BAAS,WAAW,MAAM;AAAA,IACxC;AAAA,EACF;AAEA,aAAW,OAAO,MAAM;AACtB,UAAM,YAAY,IAAI,UAAU,WAAW,KAAK;AAChD,QAAI,IAAI,UAAU,QAAQ;AACxB,YAAM,cAAU;AAAA,QACd,OAAO;AAAA,YACP,2BAAO;AAAA,UACL,QAAQ,CAAC,IAAI,GAAG,IAAI,GAAI,YAAY,MAAO,IAAI,YAAY,CAAC;AAAA,UAC5D,MAAM,CAAC,IAAI,OAAO,IAAI,QAAQ,CAAC;AAAA,QACjC,CAAC;AAAA,MACH;AACA,eAAS,KAAK,OAAO;AAAA,IACvB,WAAW,IAAI,UAAU,UAAU;AACjC,YAAM,cAAU;AAAA,QACd,OAAO;AAAA,YACP,6BAAS;AAAA,UACP,QAAQ,CAAC,IAAI,GAAG,IAAI,GAAI,YAAY,MAAO,IAAI,YAAY,CAAC;AAAA,UAC5D,QAAQ,IAAI;AAAA,UACZ,QAAQ;AAAA,QACV,CAAC;AAAA,MACH;AACA,eAAS,KAAK,OAAO;AAAA,IACvB;AAAA,EACF;AAEA,aAAW,EAAE,OAAO,WAAW,KAAK,QAAQ;AAC1C,QAAI,WAAW,SAAS,EAAG;AAG3B,UAAM,gBAAuC,CAAC;AAC9C,QAAI,iBAAoC,CAAC,WAAW,CAAC,CAAE;AACvD,QAAI,eACF,WAAW,CAAC,EAAG,eAAe,SAAS,WAAW,CAAC,EAAG,QAAQ;AAEhE,aAAS,IAAI,GAAG,IAAI,WAAW,QAAQ,KAAK;AAC1C,YAAM,QAAQ,WAAW,CAAC;AAE1B,UAAI,MAAM,eAAe,OAAO;AAE9B,sBAAc,KAAK,cAAc;AACjC,yBAAiB,CAAC,KAAK;AAAA,MACzB,WAAW,MAAM,eAAe,UAAU,MAAM,UAAU,cAAc;AAEtE,sBAAc,KAAK,cAAc;AACjC,uBAAe,MAAM;AACrB,yBAAiB,CAAC,KAAK;AAAA,MACzB,OAAO;AACL,uBAAe,KAAK,KAAK;AAAA,MAC3B;AAAA,IACF;AAGA,kBAAc,KAAK,cAAc;AAGjC,eAAW,SAAS,eAAe;AACjC,UAAI,MAAM,SAAS,EAAG;AAEtB,YAAM,eAAW,yBAAK,MAAM,IAAI,CAAC,MAAM,CAAC,EAAE,GAAG,EAAE,CAAC,CAAC,CAAC;AAClD,YAAM,YACJ,MAAM,CAAC,EAAG,eAAe,QACrB,MAAM,CAAC,EAAG,aAAa,QACrB,IACA,KACF,MAAM,CAAC,EAAG,UAAU,QAClB,IACA;AAER,UAAI,gBAAY;AAAA,QACd,CAAC,GAAG,GAAI,YAAY,MAAO,CAAC;AAAA,YAC5B;AAAA,UACE,EAAE,QAAQ,IAAI,UAAU;AAAA,cACxB,0BAAO,EAAE,OAAO,KAAK,SAAS,OAAO,GAAG,QAAQ;AAAA,QAClD;AAAA,MACF;AAGA,YAAM,kBAAkB,SAAS;AAAA,QAAI,CAAC,YACpC,6BAAS;AAAA,UACP,QAAQ,CAAC,IAAI,GAAG,IAAI,GAAG,CAAC;AAAA,UACxB,QAAQ,IAAI,iBAAiB;AAAA,UAC7B,QAAQ;AAAA,QACV,CAAC;AAAA,MACH;AAEA,YAAM,mBAAmB,aACtB,OAAO,CAAC,OAAO,GAAG,UAAU,QAAQ,EACpC;AAAA,QAAI,CAAC,WACJ,6BAAS;AAAA,UACP,QAAQ,CAAC,GAAG,GAAG,GAAG,GAAG,CAAC;AAAA,UACtB,QAAQ,GAAG,iBAAiB;AAAA,UAC5B,QAAQ;AAAA,QACV,CAAC;AAAA,MACH;AAGF,sBAAY,2BAAS,WAAW,GAAG,iBAAiB,GAAG,gBAAgB;AAEvE,sBAAY,yBAAS,OAAO,wBAAwB,SAAS;AAE7D,iBAAW,KAAK,SAAS;AAAA,IAC3B;AAAA,EACF;AAEA,aAAW,OAAO,UAAU;AAC1B,kBAAc;AAAA,MACZ,GAAG,IAAI;AAAA,MACP,GAAG,IAAI;AAAA,MACP,eAAe,IAAI;AAAA,MACnB,gBAAgB,IAAI;AAAA,MACpB,OAAO;AAAA,MACP,QAAQ,CAAC,OAAO,QAAQ;AAAA,MACxB,MAAM;AAAA,MACN,oBAAoB;AAAA,IACtB,CAAC;AAAA,EACH;AAGA,kBAAY,yBAAS,OAAO,UAAU,SAAS;AAE/C,SAAO,CAAC,WAAW,GAAG,iBAAiB,GAAG,UAAU,GAAG,UAAU;AACnE;;;AIlOA,IAAAC,gBAAoC;AACpC,4BAA0B;AAG1B,SAAS,gBAAgB,MAA6B;AACpD,SAAO,IAAI,QAAQ,CAAC,SAAS,WAAW;AACtC,UAAM,SAAS,IAAI,WAAW;AAC9B,WAAO,SAAS,MAAM;AACpB,cAAQ,OAAO,MAAgB;AAAA,IACjC;AACA,WAAO,UAAU;AACjB,WAAO,cAAc,IAAI;AAAA,EAC3B,CAAC;AACH;AAIO,IAAM,kBAAkB,CAC7B,SAIG;AACH,QAAM,CAAC,MAAM,OAAO,QAAI,wBAAmB,CAAC,CAAC;AAC7C,QAAM,CAAC,SAAS,UAAU,QAAI,wBAAS,IAAI;AAE3C,+BAAU,MAAM;AACd,QAAI,CAAC,KAAM;AACX,UAAM,eAAe,YAAY;AAC/B,iBAAW,IAAI;AACf,YAAM,aAAa,MAAM,QAAQ,IAAI,IAAI,OAAO,CAAC,IAAI;AAErD,YAAM,cAAc,WAAW,IAAI,OAAO,MAAM;AAC9C,cAAM,UAAU,sBAAAC,QAAc,UAAU,EAAE,QAAQ,KAAK,GAAG,CAAC,CAAC,CAAC;AAC7D,cAAM,WAAW,IAAI,KAAK,OAAO;AACjC,cAAM,SAAS,MAAM,gBAAgB,QAAQ;AAC7C,eAAO,EAAE,QAAQ,OAAO,EAAE,MAAO;AAAA,MACnC,CAAC;AAED,UAAI;AACF,cAAM,gBAAgB,MAAM,QAAQ,IAAI,WAAW;AACnD,gBAAQ,aAAa;AAAA,MACvB,SAAS,OAAO;AACd,gBAAQ,MAAM,0BAA0B,KAAK;AAC7C,gBAAQ,CAAC,CAAC;AAAA,MACZ,UAAE;AACA,mBAAW,KAAK;AAAA,MAClB;AAAA,IACF;AAEA,iBAAa;AAAA,EACf,GAAG,CAAC,IAAI,CAAC;AAET,SAAO,EAAE,MAAM,QAAQ;AACzB;;;ACtDA,mBAA0B;AAC1B,IAAAC,gBAAuB;AAEvB,0BAAgD;AAmB5C;AAjBG,SAAS,SAAS;AAAA,EACvB;AAAA,EACA;AAAA,EACA;AAAA,EACA,UAAU;AACZ,GAKG;AACD,QAAM,WAAO,wBAAU,+BAAW,MAAM;AACxC,QAAM,WAAO,sBAAmB;AAIhC,SACE,6CAAC,UAAK,KAAK,MACT;AAAA,gDAAC,eAAU,QAAQ,MAAM,QAAO,YAAW;AAAA,IAC3C;AAAA,MAAC;AAAA;AAAA,QACC;AAAA,QACA,aAAa,YAAY;AAAA,QACzB;AAAA;AAAA,IACF;AAAA,KAEF;AAEJ;;;AChCA,IAAAC,eAAoC;AACpC,IAAAC,gBAAiC;;;ACDjC;AAAA,EACE,MAAQ;AAAA,EACR,SAAW;AAAA,EACX,MAAQ;AAAA,EACR,OAAS;AAAA,IACP;AAAA,EACF;AAAA,EACA,SAAW;AAAA,IACT,OAAS;AAAA,IACT,WAAW;AAAA,IACX,OAAS;AAAA,IACT,YAAc;AAAA,IACd,SAAW;AAAA,IACX,WAAa;AAAA,IACb,mBAAmB;AAAA,IACnB,QAAU;AAAA,EACZ;AAAA,EACA,cAAgB;AAAA,IACd,mBAAmB;AAAA,IACnB,wBAAwB;AAAA,IACxB,yBAAyB;AAAA,IACzB,qBAAqB;AAAA,IACrB,sBAAsB;AAAA,IACtB,mBAAmB;AAAA,IACnB,0BAA0B;AAAA,IAC1B,mBAAmB;AAAA,IACnB,wBAAwB;AAAA,IACxB,gBAAgB;AAAA,IAChB,qBAAqB;AAAA,IACrB,eAAe;AAAA,IACf,iBAAiB;AAAA,IACjB,OAAS;AAAA,IACT,aAAa;AAAA,IACb,qBAAqB;AAAA,IACrB,OAAS;AAAA,IACT,gBAAgB;AAAA,EAClB;AAAA,EACA,iBAAmB;AAAA,IACjB,kBAAkB;AAAA,IAClB,4BAA4B;AAAA,IAC5B,+BAA+B;AAAA,IAC/B,iCAAiC;AAAA,IACjC,0BAA0B;AAAA,IAC1B,+BAA+B;AAAA,IAC/B,qBAAqB;AAAA,IACrB,2BAA2B;AAAA,IAC3B,oBAAoB;AAAA,IACpB,yBAAyB;AAAA,IACzB,mBAAmB;AAAA,IACnB,gBAAgB;AAAA,IAChB,oBAAoB;AAAA,IACpB,wBAAwB;AAAA,IACxB,gBAAgB;AAAA,IAChB,WAAa;AAAA,IACb,cAAc;AAAA,IACd,MAAQ;AAAA,IACR,YAAc;AAAA,IACd,MAAQ;AAAA,IACR,uBAAuB;AAAA,EACzB;AACF;;;AC5DA,kBAAqB;AACrB,IAAAC,gBAAyB;AACzB,IAAAC,gBAAuB;AACvB,YAAuB;AA4CnB,IAAAC,sBAAA;AArCJ,IAAI,OAAO,WAAW,aAAa;AACjC,SAAO,4BAA4B,IAAU,YAAM,GAAG,GAAG,CAAC;AAC5D;AAEA,SAAS,oBAAoB,gBAAgB,UAAU;AAErD,QAAM,aAAa,IAAU,iBAAW,EAAE;AAAA,IACxC,IAAU,YAAM,eAAe,GAAG,eAAe,GAAG,eAAe,CAAC;AAAA,EACtE;AAGA,QAAM,gBAAgB,IAAU,cAAQ,GAAG,GAAG,CAAC;AAG/C,gBAAc,gBAAgB,UAAU;AAGxC,QAAM,SAAS,cAAc,eAAe,QAAQ;AAEpD,SAAO;AACT;AAEO,IAAM,uBAAuB,CAAC,CAAC,MAAW;AAC/C,QAAM,UAAM,sBAAmB;AAC/B,QAAM,0BAAsB,sBAAO,EAAE,cAAc,IAAU,YAAM,EAAE,CAAC;AACtE,8BAAS,CAAC,OAAO,UAAU;AACzB,QAAI,CAAC,IAAI,QAAS;AAElB,UAAM,UAAU,OAAO;AAGvB,UAAM,iBAAiB,oBAAoB,SAAS,CAAC;AAErD,UAAM,OAAO,SAAS,KAAK,cAAc;AACzC,UAAM,OAAO,OAAO,GAAG,GAAG,CAAC;AAAA,EAC7B,CAAC;AACD,SACE,8CAAC,UAAK,KAAiB,UAAU,CAAC,KAAK,KAAK,GAAG,GAAG,CAAC,GACjD;AAAA,iDAAC,iBAAY,MAAM,CAAC,GAAG,GAAG,CAAC,GAAG;AAAA,IAC9B,6CAAC,0BAAqB,OAAM,SAAQ;AAAA,IACpC,6CAAC,oBAAK,UAAU,CAAC,GAAG,GAAG,IAAI,GAAG,UAAU,MAAM,OAAM,SAAQ,mBAE5D;AAAA,IACA;AAAA,MAAC;AAAA;AAAA,QACC,UAAU,CAAC,GAAG,GAAG,KAAK;AAAA,QACtB,UAAU;AAAA,QACV,OAAM;AAAA,QACN,UAAU,CAAC,GAAG,KAAK,IAAI,CAAC;AAAA,QACzB;AAAA;AAAA,IAED;AAAA,IACA;AAAA,MAAC;AAAA;AAAA,QACC,UAAU,CAAC,MAAM,GAAG,CAAC;AAAA,QACrB,UAAU;AAAA,QACV,OAAM;AAAA,QACN,UAAU,CAAC,GAAG,KAAK,KAAK,GAAG,CAAC;AAAA,QAC7B;AAAA;AAAA,IAED;AAAA,IACA;AAAA,MAAC;AAAA;AAAA,QACC,UAAU,CAAC,OAAO,GAAG,CAAC;AAAA,QACtB,UAAU;AAAA,QACV,OAAM;AAAA,QACN,UAAU,CAAC,GAAG,CAAC,KAAK,KAAK,GAAG,CAAC;AAAA,QAC9B;AAAA;AAAA,IAED;AAAA,IACA;AAAA,MAAC;AAAA;AAAA,QACC,UAAU,CAAC,GAAG,MAAM,CAAC;AAAA,QACrB,UAAU;AAAA,QACV,OAAM;AAAA,QACN,UAAU,CAAC,CAAC,KAAK,KAAK,GAAG,GAAG,CAAC;AAAA,QAC9B;AAAA;AAAA,IAED;AAAA,IACA;AAAA,MAAC;AAAA;AAAA,QACC,UAAU,CAAC,GAAG,OAAO,CAAC;AAAA,QACtB,UAAU;AAAA,QACV,OAAM;AAAA,QACN,UAAU,CAAC,KAAK,KAAK,GAAG,GAAG,CAAC;AAAA,QAC7B;AAAA;AAAA,IAED;AAAA,IACA;AAAA,MAAC;AAAA;AAAA,QACC,MAAM,CAAC,IAAU,oBAAc,IAAU,kBAAY,GAAG,GAAG,CAAC,CAAC,CAAC;AAAA,QAC9D,UACE,IAAU,wBAAkB;AAAA,UAC1B,OAAO;AAAA,UACP,WAAW;AAAA,QACb,CAAC;AAAA;AAAA,IAEL;AAAA,KACF;AAEJ;;;AF3FA,IAAAC,eAAqB;AAHZ,IAAAC,sBAAA;AALF,IAAM,kBAAkB,MAAM;AACnC,8BAAS,CAAC,EAAE,OAAO,MAAM;AACvB,WAAO,4BAA4B,OAAO;AAAA,EAC5C,CAAC;AAED,SAAO,6EAAE;AACX;AAIO,IAAM,qBAAqB,CAAC;AAAA,EACjC;AAAA,EACA;AACF,MAOM;AACJ,SACE,8CAAC,SAAI,OAAO,EAAE,UAAU,YAAY,OAAO,QAAQ,QAAQ,OAAO,GAChE;AAAA;AAAA,MAAC;AAAA;AAAA,QACC,OAAO;AAAA,UACL,UAAU;AAAA,UACV,KAAK;AAAA,UACL,MAAM;AAAA,UACN,OAAO;AAAA,UACP,QAAQ;AAAA,QACV;AAAA,QAEA;AAAA,UAAC;AAAA;AAAA,YACC,QAAQ;AAAA,cACN,IAAI,CAAC,GAAG,GAAG,CAAC;AAAA,cACZ,UAAU,CAAC,GAAG,GAAG,CAAC;AAAA,YACpB;AAAA,YACA,OAAO,EAAE,QAAQ,GAAG;AAAA,YAEpB;AAAA,2DAAC,kBAAa,WAAW,KAAK,KAAK,GAAG;AAAA,cACtC,6CAAC,wBAAqB;AAAA;AAAA;AAAA,QACxB;AAAA;AAAA,IACF;AAAA,IACA;AAAA,MAAC;AAAA;AAAA,QACC,OAAO,EAAE,IAAI,CAAC,GAAG,GAAG,CAAC,EAAE;AAAA,QACvB,QAAQ,EAAE,IAAI,CAAC,GAAG,GAAG,CAAC,GAAG,UAAU,CAAC,GAAG,GAAG,CAAC,EAAE;AAAA,QAE7C;AAAA,uDAAC,mBAAgB;AAAA,UACjB,6CAAC,8BAAc,YAAU,MAAC,iBAAiB,GAAG;AAAA,UAC9C,6CAAC,kBAAa,WAAW,KAAK,KAAK,GAAG;AAAA,UACtC;AAAA,YAAC;AAAA;AAAA,cACC,UAAU,CAAC,KAAK,KAAK,EAAE;AAAA,cACvB,OAAO;AAAA,cACP,WAAW,KAAK,KAAK;AAAA;AAAA,UACvB;AAAA,UACA;AAAA,YAAC;AAAA;AAAA,cACC,UAAU,CAAC,KAAK,KAAK,GAAG,GAAG,CAAC;AAAA,cAC5B,cAAc;AAAA,cACd,UAAU;AAAA,cACV,aAAa;AAAA;AAAA,UACf;AAAA,UACC;AAAA,UACA,iBAAiB,MAAM,iBAAiB,iBACvC;AAAA,YAAC;AAAA;AAAA,cACC,UAAU,iBAAiB;AAAA,cAC3B,OAAO;AAAA,gBACL,YAAY;AAAA,gBACZ,WAAW;AAAA,gBACX,iBAAiB;AAAA,gBACjB,SAAS;AAAA,gBACT,cAAc;AAAA,gBACd,eAAe;AAAA,cACjB;AAAA,cAEC,2BAAiB;AAAA;AAAA,UACpB;AAAA;AAAA;AAAA,IAEJ;AAAA,IACA;AAAA,MAAC;AAAA;AAAA,QACC,OAAO;AAAA,UACL,UAAU;AAAA,UACV,OAAO;AAAA,UACP,QAAQ;AAAA,UACR,YAAY;AAAA,UACZ,OAAO;AAAA,UACP,kBAAkB;AAAA,UAClB,UAAU;AAAA,QACZ;AAAA,QACD;AAAA;AAAA,UACG,gBAAY;AAAA;AAAA;AAAA,IAChB;AAAA,KACF;AAEJ;;;AGhGA,IAAAC,gBAAoC;AAEpC,IAAAC,SAAuB;AAmEd,IAAAC,sBAAA;AAjET,IAAM,uBAAuB,CAAC;AAAA,EAC5B;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,MAWM;AACJ,QAAM,wBAAoB,sBAA6B,IAAI;AAE3D,QAAM,yBAAqB;AAAA,IACzB,CAAC,MAAW;AACV,QAAE,gBAAgB;AAElB,UAAI;AAEF,cAAM,QACJ,EAAE,UACD,EAAE,iBAAiB,EAAE,cAAc,SAAS,IACzC,EAAE,cAAc,CAAC,EAAE,QACnB,UACH,WACG,IAAU,eAAQ,GAAI,QAAqC,IAC3D;AAEN,YAAI,OAAO;AACT,4BAAkB,UAAU;AAC5B,kBAAQ,aAAa,MAAM,CAAC,MAAM,GAAG,MAAM,GAAG,MAAM,CAAC,CAAC;AAAA,QACxD,OAAO;AACL,kBAAQ,aAAa,IAAI;AAAA,QAC3B;AAAA,MACF,SAAS,OAAO;AACd,gBAAQ,KAAK,sBAAsB,KAAK;AACxC,gBAAQ,aAAa,IAAI;AAAA,MAC3B;AAAA,IACF;AAAA,IACA,CAAC,aAAa,MAAM,SAAS,QAAQ;AAAA,EACvC;AAEA,QAAM,yBAAqB;AAAA,IACzB,CAAC,MAAW;AACV,QAAE,gBAAgB;AAClB,wBAAkB,UAAU;AAC5B,cAAQ,IAAI;AAAA,IACd;AAAA,IACA,CAAC,OAAO;AAAA,EACV;AAEA,QAAM,aAAyB;AAAA,IAC7B,gBAAgB;AAAA,IAChB,eAAe;AAAA,IACf,gBAAgB;AAAA,EAClB;AAEA,SAAO,6CAAC,WAAO,GAAG,YAAa,UAAS;AAC1C;AAEA,IAAO,+BAAQ;;;AC1Ef,IAAAC,gBAAoC;AAEpC,IAAAC,uBAAqC;AAerC,IAAI,OAAO,WAAW,eAAe,CAAC,OAAO,4BAA4B;AACvE,SAAO,6BAA6B,oBAAI,IAAuB;AACjE;AAEO,SAAS,mBAAmB,KAA0C;AAC3E,QAAM,CAAC,KAAK,MAAM,QAAI,wBAA+B,IAAI;AAEzD,+BAAU,MAAM;AACd,QAAI,CAAC,IAAK;AAEV,UAAM,QAAQ,OAAO;AACrB,QAAI,gBAAgB;AAEpB,mBAAe,kBAAkB;AAC/B,UAAI;AACF,cAAM,WAAW,MAAM,MAAM,GAAI;AACjC,cAAM,OAAO,MAAM,SAAS,KAAK;AAEjC,cAAM,aAAa,KAChB,MAAM,uBAAuB,GAC5B,KAAK,IAAI,EACV,QAAQ,UAAU,MAAM;AAC3B,cAAM,aAAa,KAAK,QAAQ,yBAAyB,EAAE;AAE3D,cAAM,YAAY,IAAI,+BAAU;AAChC,kBAAU,mBAAmB;AAAA,UAC3B,kBAAkB;AAAA,QACpB,CAAC;AACD,cAAM,YAAY,UAAU;AAAA,UAC1B,WAAW;AAAA,YACT;AAAA,YACA;AAAA,UACF;AAAA,UACA;AAAA,QACF;AAEA,cAAM,YAAY,IAAI,+BAAU;AAChC,kBAAU,aAAa,SAAS;AAChC,eAAO,UAAU,MAAM,UAAU;AAAA,MACnC,SAAS,OAAO;AACd,eAAO;AAAA,MACT;AAAA,IACF;AAEA,aAAS,UAAU;AACjB,UAAI,MAAM,IAAI,GAAI,GAAG;AACnB,cAAM,YAAY,MAAM,IAAI,GAAI;AAChC,YAAI,UAAU,QAAQ;AAEpB,iBAAO,QAAQ,QAAQ,UAAU,OAAO,MAAM,CAAC;AAAA,QACjD;AAEA,eAAO,UAAU,QAAQ,KAAK,CAAC,WAAW,OAAO,MAAM,CAAC;AAAA,MAC1D;AAEA,YAAM,UAAU,gBAAgB,EAAE,KAAK,CAAC,WAAW;AACjD,YAAI,kBAAkB,OAAO;AAE3B,iBAAO;AAAA,QACT;AACA,cAAM,IAAI,KAAM,EAAE,GAAG,MAAM,IAAI,GAAI,GAAI,OAAO,CAAC;AAC/C,eAAO;AAAA,MACT,CAAC;AACD,YAAM,IAAI,KAAM,EAAE,SAAS,QAAQ,KAAK,CAAC;AACzC,aAAO;AAAA,IACT;AAEA,YAAQ,EACL,KAAK,CAAC,WAAW;AAChB,UAAI,cAAe;AACnB,aAAO,MAAM;AAAA,IACf,CAAC,EACA,MAAM,CAAC,UAAU;AAChB,cAAQ,MAAM,KAAK;AAAA,IACrB,CAAC;AAEH,WAAO,MAAM;AACX,sBAAgB;AAAA,IAClB;AAAA,EACF,GAAG,CAAC,GAAG,CAAC;AAER,SAAO;AACT;;;ACpEQ,IAAAC,sBAAA;AA3BD,SAAS,cAAc;AAAA,EAC5B;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,GAQG;AACD,QAAM,MAAM,mBAAmB,GAAG;AAElC,MAAI,CAAC,KAAK;AACR,WACE;AAAA,MAAC;AAAA;AAAA,QACC;AAAA,QACA;AAAA,QACA;AAAA,QACA;AAAA,QAEA,wDAAC,UAAK,UACJ;AAAA,uDAAC,iBAAY,MAAM,CAAC,KAAK,KAAK,GAAG,GAAG;AAAA,UACpC,6CAAC,0BAAqB,aAAW,MAAC,OAAM,OAAM,SAAS,MAAM;AAAA,WAC/D;AAAA;AAAA,IACF;AAAA,EAEJ;AAGA,MAAI,eAAe,OAAO;AACxB,WACE;AAAA,MAAC;AAAA;AAAA,QACC;AAAA,QACA;AAAA,QACA;AAAA,QACA;AAAA,QAEA,wDAAC,UAAK,UACJ;AAAA,uDAAC,iBAAY,MAAM,CAAC,KAAK,KAAK,GAAG,GAAG;AAAA,UACpC,6CAAC,0BAAqB,aAAW,MAAC,OAAM,OAAM,SAAS,KAAK;AAAA,UAC5D,6CAAC,uBAAkB,OAAM,OAAM;AAAA,WACjC;AAAA;AAAA,IACF;AAAA,EAEJ;AACA,SACE;AAAA,IAAC;AAAA;AAAA,MACC;AAAA,MACA;AAAA,MACA;AAAA,MACA;AAAA,MAEA,uDAAC,eAAU,UAAoB,UAAoB,QAAQ,KAAK;AAAA;AAAA,EAClE;AAEJ;;;ACjEA,2BAAuC;AACvC,sBAAkB;AAClB,yBAAsC;AACtC,IAAAC,SAAuB;AACvB,IAAAC,gBAAwB;AAmDlB,IAAAC,sBAAA;AAhDC,IAAM,aAAa,CAAC;AAAA,EACzB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,MAQM;AACJ,QAAM,EAAE,WAAW,SAAS,QAAI,uBAAQ,MAAM;AAC5C,UAAM,kBAAc,6CAAuB,gBAAAC,SAAc,SAAS;AAElE,UAAMC,iBAAY,0CAAsB,WAAW;AAEnD,UAAMC,YAAW,IAAU,4BAAqB;AAAA,MAC9C,cAAc;AAAA,MACd,MAAY;AAAA;AAAA,IACd,CAAC;AACD,WAAO,EAAE,WAAAD,YAAW,UAAAC,UAAS;AAAA,EAC/B,GAAG,CAAC,SAAS,CAAC;AACd,6BAAQ,MAAM;AACZ,QAAI,WAAW;AACb,YAAM,QAAQ,IAAU,aAAM,SAAS,MAAM,OAAO,CAAC;AACrD,eAAS,SAAS,KAAK,KAAK;AAC5B,eAAS,SAAS,OAAO,GAAG,GAAG,CAAC;AAChC,eAAS,oBAAoB;AAAA,IAC/B,OAAO;AACL,eAAS,oBAAoB;AAAA,IAC/B;AAAA,EACF,GAAG,CAAC,WAAW,QAAQ,CAAC;AACxB,MAAI,CAAC,UAAW,QAAO;AAEvB,SACE;AAAA,IAAC;AAAA;AAAA,MACC;AAAA,MACA;AAAA,MACA;AAAA,MACA;AAAA,MACA,UAAU;AAAA,MAEV;AAAA,QAAC;AAAA;AAAA,UACC,UAAU;AAAA,UACV;AAAA,UACA,UAAU;AAAA,UACV,UAAU;AAAA;AAAA,MACZ;AAAA;AAAA,EACF;AAEJ;;;AChEA,+BAA8B;AAC9B,IAAAC,sBAAoC;AACpC,IAAAC,wBAA6B;AAC7B,IAAAC,gBAAwB;AA2BR,IAAAC,sBAAA;AAxBhB,IAAM,EAAE,gBAAgB,QAAI,yCAAoB,kCAAmB;AAE5D,IAAM,mBAAmB,CAAC;AAAA,EAC/B;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,MAQM;AAEJ,QAAM,gBAAY,uBAAQ,MAAM;AAC9B,QAAI,CAAC,UAAW,QAAO;AACvB,UAAMC,aAAmB,CAAC;AAC1B,UAAM,OAAO,gBAAgBA,UAAS;AACtC,SAAK,OAAO,6CAAC,0CAAc,WAAsB,CAAE;AACnD,WAAOA;AAAA,EACT,GAAG,CAAC,SAAS,CAAC;AAEd,MAAI,CAAC,UAAW,QAAO;AAEvB,SACE,6EACG,oBAAU,IAAI,CAAC,MAAM,UACpB;AAAA,IAAC;AAAA;AAAA,MAGC;AAAA,MACA;AAAA,MACA,WAAW;AAAA,MACX;AAAA,MACA;AAAA,MACA;AAAA,MACA;AAAA;AAAA,IAPK;AAAA,EAQP,CACD,GACH;AAEJ;;;ACrDO,IAAM,QAAQ,IAAqB,SAAe;;;AfwDrD,IAAAC,sBAAA;AApCG,IAAM,YAAY,CAAC,EAAE,MAAM,SAAS,MAAa;AACtD,QAAM,CAAC,kBAAkB,mBAAmB,QAAI,wBAI7C;AAAA,IACD,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,eAAe;AAAA,EACjB,CAAC;AACD,WAAS,yBAAyB,UAAU,IAAI;AAEhD,MAAI,CAAC,KAAM,QAAO;AAElB,QAAM,gBAAY,uBAAQ,MAAM;AAC9B,QAAI,CAAC,KAAK,KAAK,CAAC,MAAM,EAAE,SAAS,WAAW,EAAG,QAAO;AACtD,WAAO,wBAAwB,IAAI;AAAA,EACrC,GAAG,CAAC,IAAI,CAAC;AAET,QAAM,EAAE,MAAM,QAAQ,IAAI,gBAAgB,SAAS;AAEnD,QAAM,qBAAiB,sBAAG,IAAI,EAAE,cAAc,KAAK;AAEnD,QAAM,cAAc,CAClB,aACA,eACA,kBACG;AACH,wBAAoB;AAAA,MAClB,IAAI;AAAA,MACJ,MAAM,iBAAiB;AAAA,MACvB,eAAe,iBAAiB;AAAA,IAClC,CAAC;AAAA,EACH;AAEA,SACE,8CAAC,sBAAmB,kBACjB;AAAA,SAAK,IAAI,CAAC,EAAE,QAAQ,MAAM,GAAG,UAC5B;AAAA,MAAC;AAAA;AAAA,QAEC;AAAA,QACA;AAAA,QACA,SAAS,UAAU,IAAI,OAAO;AAAA;AAAA,MAHzB;AAAA,IAIP,CACD;AAAA,IACA,eAAe,IAAI,CAAC,kBAAkB;AACrC,YAAM,oBAAgB,sBAAG,IAAI,EAAE,iBAAiB,SAAS;AAAA,QACvD,qBAAqB,cAAc;AAAA,MACrC,CAAC,GAAG;AACJ,YAAM,MAAM,cAAc,iBAAiB,cAAc;AACzD,YAAM,iBAAiB,cAAc,WACjC;AAAA,QACG,cAAc,SAAS,IAAI,KAAK,KAAM;AAAA,QACtC,cAAc,SAAS,IAAI,KAAK,KAAM;AAAA,QACtC,cAAc,SAAS,IAAI,KAAK,KAAM;AAAA,MACzC,IACA;AAEJ,UAAI,KAAK;AACP,eACE;AAAA,UAAC;AAAA;AAAA,YAEC;AAAA,YACA,UACE,cAAc,WACV;AAAA,cACE,cAAc,SAAS;AAAA,cACvB,cAAc,SAAS;AAAA,cACvB,cAAc,SAAS;AAAA,YACzB,IACA;AAAA,YAEN,UAAU;AAAA,YACV,aAAa,cAAc;AAAA,YAC3B,MAAM,iBAAiB,cAAc;AAAA,YACrC,SAAS;AAAA,YACT,WAAW,iBAAiB,OAAO,cAAc;AAAA;AAAA,UAf5C,cAAc;AAAA,QAgBrB;AAAA,MAEJ;AAEA,UAAI,cAAc,aAAa;AAC7B,eACE;AAAA,UAAC;AAAA;AAAA,YAEC,WAAW,cAAc;AAAA,YACzB;AAAA,YACA,aAAa,cAAc;AAAA,YAC3B,MAAM,iBAAiB,cAAc;AAAA,YACrC,SAAS;AAAA,YACT,WAAW,iBAAiB,OAAO,cAAc;AAAA;AAAA,UAN5C,cAAc;AAAA,QAOrB;AAAA,MAEJ;AAEA,UAAI,cAAc,oBAAoB;AACpC,eACE;AAAA,UAAC;AAAA;AAAA,YACC,gBACE,cAAc,WACV;AAAA,cACE,cAAc,SAAS;AAAA,cACvB,cAAc,SAAS;AAAA,cACvB,cAAc,SAAS;AAAA,YACzB,IACA;AAAA,YAEN;AAAA,YACA,WAAW,cAAc;AAAA,YACzB,aAAa,cAAc;AAAA,YAC3B,MAAM,iBAAiB,cAAc;AAAA,YACrC,SAAS;AAAA,YACT,WAAW,iBAAiB,OAAO,cAAc;AAAA;AAAA,QACnD;AAAA,MAEJ;AAAA,IACF,CAAC;AAAA,KACH;AAEJ;","names":["import_soup_util","import_react","import_transforms","import_primitives","import_colors","import_booleans","import_extrusions","import_primitives","import_react","stlSerializer","import_react","import_drei","import_fiber","import_fiber","import_react","import_jsx_runtime","import_drei","import_jsx_runtime","import_react","THREE","import_jsx_runtime","import_react","import_three_stdlib","import_jsx_runtime","THREE","import_react","import_jsx_runtime","jscad","threeGeom","material","import_jscad_fiber","import_jscad_planner","import_react","import_jsx_runtime","jscadPlan","import_jsx_runtime"]}

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@tscircuit/3d-viewer",
-  "version": "0.0.44",
+  "version": "0.0.46",
   "main": "./dist/index.js",
   "files": [
     "dist"