@tscircuit/3d-viewer 0.0.424 → 0.0.425

package/dist/index.js

@@ -144,8 +144,8 @@ var require_dist = __commonJS({
           fromValues: (x, y) => [x, y]
         },
         vec3: {
-          create: (x, y, z126) => [x, y, z126],
-          fromValues: (x, y, z126) => [x, y, z126]
+          create: (x, y, z133) => [x, y, z133],
+          fromValues: (x, y, z133) => [x, y, z133]
         }
       },
       geometries: {
@@ -532,29 +532,29 @@ var require_fromRotation = __commonJS({
     var { sin: sin2, cos: cos2 } = require_trigonometry();
     var identity = require_identity();
     var fromRotation = (out, rad, axis) => {
-      let [x, y, z126] = axis;
-      const lengthSquared = x * x + y * y + z126 * z126;
+      let [x, y, z133] = axis;
+      const lengthSquared = x * x + y * y + z133 * z133;
       if (Math.abs(lengthSquared) < EPS) {
         return identity(out);
       }
       const len = 1 / Math.sqrt(lengthSquared);
       x *= len;
       y *= len;
-      z126 *= len;
+      z133 *= len;
       const s = sin2(rad);
       const c = cos2(rad);
       const t = 1 - c;
       out[0] = x * x * t + c;
-      out[1] = y * x * t + z126 * s;
-      out[2] = z126 * x * t - y * s;
+      out[1] = y * x * t + z133 * s;
+      out[2] = z133 * x * t - y * s;
       out[3] = 0;
-      out[4] = x * y * t - z126 * s;
+      out[4] = x * y * t - z133 * s;
       out[5] = y * y * t + c;
-      out[6] = z126 * y * t + x * s;
+      out[6] = z133 * y * t + x * s;
       out[7] = 0;
-      out[8] = x * z126 * t + y * s;
-      out[9] = y * z126 * t - x * s;
-      out[10] = z126 * z126 * t + c;
+      out[8] = x * z133 * t + y * s;
+      out[9] = y * z133 * t - x * s;
+      out[10] = z133 * z133 * t + c;
       out[11] = 0;
       out[12] = 0;
       out[13] = 0;
@@ -808,8 +808,8 @@ var require_distance = __commonJS({
     var distance2 = (a, b) => {
       const x = b[0] - a[0];
       const y = b[1] - a[1];
-      const z126 = b[2] - a[2];
-      return Math.sqrt(x * x + y * y + z126 * z126);
+      const z133 = b[2] - a[2];
+      return Math.sqrt(x * x + y * y + z133 * z133);
     };
     module.exports = distance2;
   }
@@ -857,11 +857,11 @@ var require_fromValues2 = __commonJS({
   "node_modules/@jscad/modeling/src/maths/vec3/fromValues.js"(exports, module) {
     "use strict";
     var create = require_create2();
-    var fromValues = (x, y, z126) => {
+    var fromValues = (x, y, z133) => {
       const out = create();
       out[0] = x;
       out[1] = y;
-      out[2] = z126;
+      out[2] = z133;
       return out;
     };
     module.exports = fromValues;
@@ -872,10 +872,10 @@ var require_fromValues2 = __commonJS({
 var require_fromVec2 = __commonJS({
   "node_modules/@jscad/modeling/src/maths/vec3/fromVec2.js"(exports, module) {
     "use strict";
-    var fromVector2 = (out, vector, z126 = 0) => {
+    var fromVector2 = (out, vector, z133 = 0) => {
       out[0] = vector[0];
       out[1] = vector[1];
-      out[2] = z126;
+      out[2] = z133;
       return out;
     };
     module.exports = fromVector2;
@@ -889,8 +889,8 @@ var require_length = __commonJS({
     var length2 = (vector) => {
       const x = vector[0];
       const y = vector[1];
-      const z126 = vector[2];
-      return Math.sqrt(x * x + y * y + z126 * z126);
+      const z133 = vector[2];
+      return Math.sqrt(x * x + y * y + z133 * z133);
     };
     module.exports = length2;
   }
@@ -973,14 +973,14 @@ var require_normalize = __commonJS({
     var normalize = (out, vector) => {
       const x = vector[0];
       const y = vector[1];
-      const z126 = vector[2];
-      let len = x * x + y * y + z126 * z126;
+      const z133 = vector[2];
+      let len = x * x + y * y + z133 * z133;
       if (len > 0) {
         len = 1 / Math.sqrt(len);
       }
       out[0] = x * len;
       out[1] = y * len;
-      out[2] = z126 * len;
+      out[2] = z133 * len;
       return out;
     };
     module.exports = normalize;
@@ -1104,8 +1104,8 @@ var require_squaredDistance = __commonJS({
     var squaredDistance = (a, b) => {
       const x = b[0] - a[0];
       const y = b[1] - a[1];
-      const z126 = b[2] - a[2];
-      return x * x + y * y + z126 * z126;
+      const z133 = b[2] - a[2];
+      return x * x + y * y + z133 * z133;
     };
     module.exports = squaredDistance;
   }
@@ -1118,8 +1118,8 @@ var require_squaredLength = __commonJS({
     var squaredLength = (vector) => {
       const x = vector[0];
       const y = vector[1];
-      const z126 = vector[2];
-      return x * x + y * y + z126 * z126;
+      const z133 = vector[2];
+      return x * x + y * y + z133 * z133;
     };
     module.exports = squaredLength;
   }
@@ -1155,12 +1155,12 @@ var require_transform = __commonJS({
     var transform2 = (out, vector, matrix) => {
       const x = vector[0];
       const y = vector[1];
-      const z126 = vector[2];
-      let w = matrix[3] * x + matrix[7] * y + matrix[11] * z126 + matrix[15];
+      const z133 = vector[2];
+      let w = matrix[3] * x + matrix[7] * y + matrix[11] * z133 + matrix[15];
       w = w || 1;
-      out[0] = (matrix[0] * x + matrix[4] * y + matrix[8] * z126 + matrix[12]) / w;
-      out[1] = (matrix[1] * x + matrix[5] * y + matrix[9] * z126 + matrix[13]) / w;
-      out[2] = (matrix[2] * x + matrix[6] * y + matrix[10] * z126 + matrix[14]) / w;
+      out[0] = (matrix[0] * x + matrix[4] * y + matrix[8] * z133 + matrix[12]) / w;
+      out[1] = (matrix[1] * x + matrix[5] * y + matrix[9] * z133 + matrix[13]) / w;
+      out[2] = (matrix[2] * x + matrix[6] * y + matrix[10] * z133 + matrix[14]) / w;
       return out;
     };
     module.exports = transform2;
@@ -1362,8 +1362,8 @@ var require_isMirroring = __commonJS({
     var isMirroring = (matrix) => {
       const x = matrix[4] * matrix[9] - matrix[8] * matrix[5];
       const y = matrix[8] * matrix[1] - matrix[0] * matrix[9];
-      const z126 = matrix[0] * matrix[5] - matrix[4] * matrix[1];
-      const d = x * matrix[2] + y * matrix[6] + z126 * matrix[10];
+      const z133 = matrix[0] * matrix[5] - matrix[4] * matrix[1];
+      const d = x * matrix[2] + y * matrix[6] + z133 * matrix[10];
       return d < 0;
     };
     module.exports = isMirroring;
@@ -1465,15 +1465,15 @@ var require_rotate = __commonJS({
     var { sin: sin2, cos: cos2 } = require_trigonometry();
     var copy = require_copy();
     var rotate2 = (out, matrix, radians, axis) => {
-      let [x, y, z126] = axis;
-      const lengthSquared = x * x + y * y + z126 * z126;
+      let [x, y, z133] = axis;
+      const lengthSquared = x * x + y * y + z133 * z133;
       if (Math.abs(lengthSquared) < EPS) {
         return copy(out, matrix);
       }
       const len = 1 / Math.sqrt(lengthSquared);
       x *= len;
       y *= len;
-      z126 *= len;
+      z133 *= len;
       const s = sin2(radians);
       const c = cos2(radians);
       const t = 1 - c;
@@ -1490,14 +1490,14 @@ var require_rotate = __commonJS({
       const a22 = matrix[10];
       const a23 = matrix[11];
       const b00 = x * x * t + c;
-      const b01 = y * x * t + z126 * s;
-      const b02 = z126 * x * t - y * s;
-      const b10 = x * y * t - z126 * s;
+      const b01 = y * x * t + z133 * s;
+      const b02 = z133 * x * t - y * s;
+      const b10 = x * y * t - z133 * s;
       const b11 = y * y * t + c;
-      const b12 = z126 * y * t + x * s;
-      const b20 = x * z126 * t + y * s;
-      const b21 = y * z126 * t - x * s;
-      const b22 = z126 * z126 * t + c;
+      const b12 = z133 * y * t + x * s;
+      const b20 = x * z133 * t + y * s;
+      const b21 = y * z133 * t - x * s;
+      const b22 = z133 * z133 * t + c;
       out[0] = a00 * b00 + a10 * b01 + a20 * b02;
       out[1] = a01 * b00 + a11 * b01 + a21 * b02;
       out[2] = a02 * b00 + a12 * b01 + a22 * b02;
@@ -1649,7 +1649,7 @@ var require_scale2 = __commonJS({
     var scale2 = (out, matrix, dimensions) => {
       const x = dimensions[0];
       const y = dimensions[1];
-      const z126 = dimensions[2];
+      const z133 = dimensions[2];
       out[0] = matrix[0] * x;
       out[1] = matrix[1] * x;
       out[2] = matrix[2] * x;
@@ -1658,10 +1658,10 @@ var require_scale2 = __commonJS({
       out[5] = matrix[5] * y;
       out[6] = matrix[6] * y;
       out[7] = matrix[7] * y;
-      out[8] = matrix[8] * z126;
-      out[9] = matrix[9] * z126;
-      out[10] = matrix[10] * z126;
-      out[11] = matrix[11] * z126;
+      out[8] = matrix[8] * z133;
+      out[9] = matrix[9] * z133;
+      out[10] = matrix[10] * z133;
+      out[11] = matrix[11] * z133;
       out[12] = matrix[12];
       out[13] = matrix[13];
       out[14] = matrix[14];
@@ -1715,7 +1715,7 @@ var require_translate = __commonJS({
     var translate8 = (out, matrix, offsets) => {
       const x = offsets[0];
       const y = offsets[1];
-      const z126 = offsets[2];
+      const z133 = offsets[2];
       let a00;
       let a01;
       let a02;
@@ -1729,10 +1729,10 @@ var require_translate = __commonJS({
       let a22;
       let a23;
       if (matrix === out) {
-        out[12] = matrix[0] * x + matrix[4] * y + matrix[8] * z126 + matrix[12];
-        out[13] = matrix[1] * x + matrix[5] * y + matrix[9] * z126 + matrix[13];
-        out[14] = matrix[2] * x + matrix[6] * y + matrix[10] * z126 + matrix[14];
-        out[15] = matrix[3] * x + matrix[7] * y + matrix[11] * z126 + matrix[15];
+        out[12] = matrix[0] * x + matrix[4] * y + matrix[8] * z133 + matrix[12];
+        out[13] = matrix[1] * x + matrix[5] * y + matrix[9] * z133 + matrix[13];
+        out[14] = matrix[2] * x + matrix[6] * y + matrix[10] * z133 + matrix[14];
+        out[15] = matrix[3] * x + matrix[7] * y + matrix[11] * z133 + matrix[15];
       } else {
         a00 = matrix[0];
         a01 = matrix[1];
@@ -1758,10 +1758,10 @@ var require_translate = __commonJS({
         out[9] = a21;
         out[10] = a22;
         out[11] = a23;
-        out[12] = a00 * x + a10 * y + a20 * z126 + matrix[12];
-        out[13] = a01 * x + a11 * y + a21 * z126 + matrix[13];
-        out[14] = a02 * x + a12 * y + a22 * z126 + matrix[14];
-        out[15] = a03 * x + a13 * y + a23 * z126 + matrix[15];
+        out[12] = a00 * x + a10 * y + a20 * z133 + matrix[12];
+        out[13] = a01 * x + a11 * y + a21 * z133 + matrix[13];
+        out[14] = a02 * x + a12 * y + a22 * z133 + matrix[14];
+        out[15] = a03 * x + a13 * y + a23 * z133 + matrix[15];
       }
       return out;
     };
@@ -3831,11 +3831,11 @@ var require_fromValues4 = __commonJS({
   "node_modules/@jscad/modeling/src/maths/vec4/fromValues.js"(exports, module) {
     "use strict";
     var create = require_create7();
-    var fromValues = (x, y, z126, w) => {
+    var fromValues = (x, y, z133, w) => {
       const out = create();
       out[0] = x;
       out[1] = y;
-      out[2] = z126;
+      out[2] = z133;
       out[3] = w;
       return out;
     };
@@ -3993,8 +3993,8 @@ var require_projectionOfPoint = __commonJS({
       const a = point2[0] * plane[0] + point2[1] * plane[1] + point2[2] * plane[2] - plane[3];
       const x = point2[0] - a * plane[0];
       const y = point2[1] - a * plane[1];
-      const z126 = point2[2] - a * plane[2];
-      return vec3.fromValues(x, y, z126);
+      const z133 = point2[2] - a * plane[2];
+      return vec3.fromValues(x, y, z133);
     };
     module.exports = projectionOfPoint;
   }
@@ -4298,11 +4298,11 @@ var require_transform5 = __commonJS({
   "node_modules/@jscad/modeling/src/maths/vec4/transform.js"(exports, module) {
     "use strict";
     var transform2 = (out, vector, matrix) => {
-      const [x, y, z126, w] = vector;
-      out[0] = matrix[0] * x + matrix[4] * y + matrix[8] * z126 + matrix[12] * w;
-      out[1] = matrix[1] * x + matrix[5] * y + matrix[9] * z126 + matrix[13] * w;
-      out[2] = matrix[2] * x + matrix[6] * y + matrix[10] * z126 + matrix[14] * w;
-      out[3] = matrix[3] * x + matrix[7] * y + matrix[11] * z126 + matrix[15] * w;
+      const [x, y, z133, w] = vector;
+      out[0] = matrix[0] * x + matrix[4] * y + matrix[8] * z133 + matrix[12] * w;
+      out[1] = matrix[1] * x + matrix[5] * y + matrix[9] * z133 + matrix[13] * w;
+      out[2] = matrix[2] * x + matrix[6] * y + matrix[10] * z133 + matrix[14] * w;
+      out[3] = matrix[3] * x + matrix[7] * y + matrix[11] * z133 + matrix[15] * w;
       return out;
     };
     module.exports = transform2;
@@ -4364,8 +4364,8 @@ var require_measureBoundingSphere = __commonJS({
       out[2] = (minz[2] + maxz[2]) * 0.5;
       const x = out[0] - maxx[0];
       const y = out[1] - maxy[1];
-      const z126 = out[2] - maxz[2];
-      out[3] = Math.sqrt(x * x + y * y + z126 * z126);
+      const z133 = out[2] - maxz[2];
+      out[3] = Math.sqrt(x * x + y * y + z133 * z133);
       cache.set(polygon3, out);
       return out;
     };
@@ -14750,7 +14750,7 @@ var import_jscad_planner = __toESM(require_dist(), 1);
 var import_modeling = __toESM(require_src(), 1);
 
 // node_modules/@tscircuit/footprinter/dist/index.js
-import { z as z124 } from "zod";
+import { z as z131 } from "zod";
 
 // node_modules/@tscircuit/mm/dist/index.js
 var unitToMm = {
@@ -14830,9 +14830,9 @@ import { z as z48 } from "zod";
 import { z as z49 } from "zod";
 import { z as z50 } from "zod";
 import { z as z51 } from "zod";
-import { z as z53 } from "zod";
 import { z as z52 } from "zod";
 import { z as z54 } from "zod";
+import { z as z53 } from "zod";
 import { z as z55 } from "zod";
 import { z as z56 } from "zod";
 import { z as z57 } from "zod";
@@ -14902,6 +14902,13 @@ import { z as z120 } from "zod";
 import { z as z121 } from "zod";
 import { z as z122 } from "zod";
 import { z as z123 } from "zod";
+import { z as z124 } from "zod";
+import { z as z125 } from "zod";
+import { z as z126 } from "zod";
+import { z as z127 } from "zod";
+import { z as z128 } from "zod";
+import { z as z129 } from "zod";
+import { z as z130 } from "zod";
 var unitMappings = {
   Hz: {
     baseUnit: "Hz",
@@ -15448,7 +15455,8 @@ var source_port = z36.object({
   port_hints: z36.array(z36.string()).optional(),
   name: z36.string(),
   source_port_id: z36.string(),
-  source_component_id: z36.string(),
+  source_component_id: z36.string().optional(),
+  source_group_id: z36.string().optional(),
   subcircuit_id: z36.string().optional(),
   subcircuit_connectivity_map_key: z36.string().optional()
 });
@@ -15539,178 +15547,191 @@ var source_manually_placed_via = z43.object({
   source_trace_id: z43.string().optional()
 }).describe("Defines a via that is manually placed in the source domain");
 expectTypesMatch(true);
-var schematic_box = z44.object({
-  type: z44.literal("schematic_box"),
-  schematic_component_id: z44.string().optional(),
+var unknown_error_finding_part = z44.object({
+  type: z44.literal("unknown_error_finding_part"),
+  unknown_error_finding_part_id: getZodPrefixedIdWithDefault(
+    "unknown_error_finding_part"
+  ),
+  error_type: z44.literal("unknown_error_finding_part").default("unknown_error_finding_part"),
+  message: z44.string(),
+  source_component_id: z44.string().optional(),
+  subcircuit_id: z44.string().optional()
+}).describe(
+  "Error emitted when an unexpected error occurs while finding a part"
+);
+expectTypesMatch(true);
+var schematic_box = z45.object({
+  type: z45.literal("schematic_box"),
+  schematic_component_id: z45.string().optional(),
   width: distance,
   height: distance,
-  is_dashed: z44.boolean().default(false),
+  is_dashed: z45.boolean().default(false),
   x: distance,
   y: distance,
-  subcircuit_id: z44.string().optional()
+  subcircuit_id: z45.string().optional()
 }).describe("Draws a box on the schematic");
 expectTypesMatch(true);
-var schematic_path = z45.object({
-  type: z45.literal("schematic_path"),
-  schematic_component_id: z45.string(),
-  fill_color: z45.enum(["red", "blue"]).optional(),
-  is_filled: z45.boolean().optional(),
-  points: z45.array(point),
-  subcircuit_id: z45.string().optional()
+var schematic_path = z46.object({
+  type: z46.literal("schematic_path"),
+  schematic_component_id: z46.string(),
+  fill_color: z46.enum(["red", "blue"]).optional(),
+  is_filled: z46.boolean().optional(),
+  points: z46.array(point),
+  subcircuit_id: z46.string().optional()
 });
 expectTypesMatch(true);
-var schematic_pin_styles = z46.record(
-  z46.object({
+var schematic_pin_styles = z47.record(
+  z47.object({
     left_margin: length.optional(),
     right_margin: length.optional(),
     top_margin: length.optional(),
     bottom_margin: length.optional()
   })
 );
-var schematic_component_port_arrangement_by_size = z46.object({
-  left_size: z46.number(),
-  right_size: z46.number(),
-  top_size: z46.number().optional(),
-  bottom_size: z46.number().optional()
+var schematic_component_port_arrangement_by_size = z47.object({
+  left_size: z47.number(),
+  right_size: z47.number(),
+  top_size: z47.number().optional(),
+  bottom_size: z47.number().optional()
 });
 expectTypesMatch(true);
-var schematic_component_port_arrangement_by_sides = z46.object({
-  left_side: z46.object({
-    pins: z46.array(z46.number()),
+var schematic_component_port_arrangement_by_sides = z47.object({
+  left_side: z47.object({
+    pins: z47.array(z47.number()),
     // @ts-ignore
-    direction: z46.enum(["top-to-bottom", "bottom-to-top"]).optional()
+    direction: z47.enum(["top-to-bottom", "bottom-to-top"]).optional()
   }).optional(),
-  right_side: z46.object({
-    pins: z46.array(z46.number()),
+  right_side: z47.object({
+    pins: z47.array(z47.number()),
     // @ts-ignore
-    direction: z46.enum(["top-to-bottom", "bottom-to-top"]).optional()
+    direction: z47.enum(["top-to-bottom", "bottom-to-top"]).optional()
   }).optional(),
-  top_side: z46.object({
-    pins: z46.array(z46.number()),
+  top_side: z47.object({
+    pins: z47.array(z47.number()),
     // @ts-ignore
-    direction: z46.enum(["left-to-right", "right-to-left"]).optional()
+    direction: z47.enum(["left-to-right", "right-to-left"]).optional()
   }).optional(),
-  bottom_side: z46.object({
-    pins: z46.array(z46.number()),
+  bottom_side: z47.object({
+    pins: z47.array(z47.number()),
     // @ts-ignore
-    direction: z46.enum(["left-to-right", "right-to-left"]).optional()
+    direction: z47.enum(["left-to-right", "right-to-left"]).optional()
   }).optional()
 });
 expectTypesMatch(true);
-var port_arrangement = z46.union([
+var port_arrangement = z47.union([
   schematic_component_port_arrangement_by_size,
   schematic_component_port_arrangement_by_sides
 ]);
-var schematic_component = z46.object({
-  type: z46.literal("schematic_component"),
+var schematic_component = z47.object({
+  type: z47.literal("schematic_component"),
   size,
   center: point,
-  source_component_id: z46.string().optional(),
-  schematic_component_id: z46.string(),
+  source_component_id: z47.string().optional(),
+  schematic_component_id: z47.string(),
   pin_spacing: length.optional(),
   pin_styles: schematic_pin_styles.optional(),
   box_width: length.optional(),
-  symbol_name: z46.string().optional(),
+  symbol_name: z47.string().optional(),
   port_arrangement: port_arrangement.optional(),
-  port_labels: z46.record(z46.string()).optional(),
-  symbol_display_value: z46.string().optional(),
-  subcircuit_id: z46.string().optional(),
-  schematic_group_id: z46.string().optional(),
-  is_schematic_group: z46.boolean().optional(),
-  source_group_id: z46.string().optional(),
-  is_box_with_pins: z46.boolean().optional().default(true)
+  port_labels: z47.record(z47.string()).optional(),
+  symbol_display_value: z47.string().optional(),
+  subcircuit_id: z47.string().optional(),
+  schematic_group_id: z47.string().optional(),
+  is_schematic_group: z47.boolean().optional(),
+  source_group_id: z47.string().optional(),
+  is_box_with_pins: z47.boolean().optional().default(true)
 });
 expectTypesMatch(true);
-var schematic_line = z47.object({
-  type: z47.literal("schematic_line"),
+var schematic_line = z48.object({
+  type: z48.literal("schematic_line"),
   schematic_line_id: getZodPrefixedIdWithDefault("schematic_line"),
-  schematic_component_id: z47.string(),
+  schematic_component_id: z48.string(),
   x1: distance,
   y1: distance,
   x2: distance,
   y2: distance,
   stroke_width: distance.nullable().optional(),
-  color: z47.string().default("#000000"),
-  is_dashed: z47.boolean().default(false),
-  subcircuit_id: z47.string().optional()
+  color: z48.string().default("#000000"),
+  is_dashed: z48.boolean().default(false),
+  subcircuit_id: z48.string().optional()
 }).describe("Draws a styled line on the schematic");
 expectTypesMatch(true);
-var schematic_rect = z48.object({
-  type: z48.literal("schematic_rect"),
+var schematic_rect = z49.object({
+  type: z49.literal("schematic_rect"),
   schematic_rect_id: getZodPrefixedIdWithDefault("schematic_rect"),
-  schematic_component_id: z48.string(),
+  schematic_component_id: z49.string(),
   center: point,
   width: distance,
   height: distance,
   rotation: rotation.default(0),
   stroke_width: distance.nullable().optional(),
-  color: z48.string().default("#000000"),
-  is_filled: z48.boolean().default(false),
-  fill_color: z48.string().optional(),
-  is_dashed: z48.boolean().default(false),
-  subcircuit_id: z48.string().optional()
+  color: z49.string().default("#000000"),
+  is_filled: z49.boolean().default(false),
+  fill_color: z49.string().optional(),
+  is_dashed: z49.boolean().default(false),
+  subcircuit_id: z49.string().optional()
 }).describe("Draws a styled rectangle on the schematic");
 expectTypesMatch(true);
-var schematic_circle = z49.object({
-  type: z49.literal("schematic_circle"),
+var schematic_circle = z50.object({
+  type: z50.literal("schematic_circle"),
   schematic_circle_id: getZodPrefixedIdWithDefault("schematic_circle"),
-  schematic_component_id: z49.string(),
+  schematic_component_id: z50.string(),
   center: point,
   radius: distance,
   stroke_width: distance.nullable().optional(),
-  color: z49.string().default("#000000"),
-  is_filled: z49.boolean().default(false),
-  fill_color: z49.string().optional(),
-  is_dashed: z49.boolean().default(false),
-  subcircuit_id: z49.string().optional()
+  color: z50.string().default("#000000"),
+  is_filled: z50.boolean().default(false),
+  fill_color: z50.string().optional(),
+  is_dashed: z50.boolean().default(false),
+  subcircuit_id: z50.string().optional()
 }).describe("Draws a styled circle on the schematic");
 expectTypesMatch(true);
-var schematic_arc = z50.object({
-  type: z50.literal("schematic_arc"),
+var schematic_arc = z51.object({
+  type: z51.literal("schematic_arc"),
   schematic_arc_id: getZodPrefixedIdWithDefault("schematic_arc"),
-  schematic_component_id: z50.string(),
+  schematic_component_id: z51.string(),
   center: point,
   radius: distance,
   start_angle_degrees: rotation,
   end_angle_degrees: rotation,
-  direction: z50.enum(["clockwise", "counterclockwise"]).default("counterclockwise"),
+  direction: z51.enum(["clockwise", "counterclockwise"]).default("counterclockwise"),
   stroke_width: distance.nullable().optional(),
-  color: z50.string().default("#000000"),
-  is_dashed: z50.boolean().default(false),
-  subcircuit_id: z50.string().optional()
+  color: z51.string().default("#000000"),
+  is_dashed: z51.boolean().default(false),
+  subcircuit_id: z51.string().optional()
 }).describe("Draws a styled arc on the schematic");
 expectTypesMatch(true);
-var schematic_trace = z51.object({
-  type: z51.literal("schematic_trace"),
-  schematic_trace_id: z51.string(),
-  source_trace_id: z51.string().optional(),
-  junctions: z51.array(
-    z51.object({
-      x: z51.number(),
-      y: z51.number()
+var schematic_trace = z52.object({
+  type: z52.literal("schematic_trace"),
+  schematic_trace_id: z52.string(),
+  source_trace_id: z52.string().optional(),
+  junctions: z52.array(
+    z52.object({
+      x: z52.number(),
+      y: z52.number()
     })
   ),
-  edges: z51.array(
-    z51.object({
-      from: z51.object({
-        x: z51.number(),
-        y: z51.number()
+  edges: z52.array(
+    z52.object({
+      from: z52.object({
+        x: z52.number(),
+        y: z52.number()
       }),
-      to: z51.object({
-        x: z51.number(),
-        y: z51.number()
+      to: z52.object({
+        x: z52.number(),
+        y: z52.number()
       }),
-      is_crossing: z51.boolean().optional(),
-      from_schematic_port_id: z51.string().optional(),
-      to_schematic_port_id: z51.string().optional()
+      is_crossing: z52.boolean().optional(),
+      from_schematic_port_id: z52.string().optional(),
+      to_schematic_port_id: z52.string().optional()
     })
   ),
-  subcircuit_id: z51.string().optional(),
+  subcircuit_id: z52.string().optional(),
   // TODO: make required in a future release
-  subcircuit_connectivity_map_key: z51.string().optional()
+  subcircuit_connectivity_map_key: z52.string().optional()
 });
 expectTypesMatch(true);
-var fivePointAnchor = z52.enum([
+var fivePointAnchor = z53.enum([
   "center",
   "left",
   "right",
@@ -15718,229 +15739,238 @@ var fivePointAnchor = z52.enum([
   "bottom"
 ]);
 expectTypesMatch(true);
-var schematic_text = z53.object({
-  type: z53.literal("schematic_text"),
-  schematic_component_id: z53.string().optional(),
-  schematic_text_id: z53.string(),
-  text: z53.string(),
-  font_size: z53.number().default(0.18),
-  position: z53.object({
+var schematic_text = z54.object({
+  type: z54.literal("schematic_text"),
+  schematic_component_id: z54.string().optional(),
+  schematic_text_id: z54.string(),
+  text: z54.string(),
+  font_size: z54.number().default(0.18),
+  position: z54.object({
     x: distance,
     y: distance
   }),
-  rotation: z53.number().default(0),
-  anchor: z53.union([fivePointAnchor.describe("legacy"), ninePointAnchor]).default("center"),
-  color: z53.string().default("#000000"),
-  subcircuit_id: z53.string().optional()
+  rotation: z54.number().default(0),
+  anchor: z54.union([fivePointAnchor.describe("legacy"), ninePointAnchor]).default("center"),
+  color: z54.string().default("#000000"),
+  subcircuit_id: z54.string().optional()
 });
 expectTypesMatch(true);
-var schematic_port = z54.object({
-  type: z54.literal("schematic_port"),
-  schematic_port_id: z54.string(),
-  source_port_id: z54.string(),
-  schematic_component_id: z54.string().optional(),
+var schematic_port = z55.object({
+  type: z55.literal("schematic_port"),
+  schematic_port_id: z55.string(),
+  source_port_id: z55.string(),
+  schematic_component_id: z55.string().optional(),
   center: point,
-  facing_direction: z54.enum(["up", "down", "left", "right"]).optional(),
-  distance_from_component_edge: z54.number().optional(),
-  side_of_component: z54.enum(["top", "bottom", "left", "right"]).optional(),
-  true_ccw_index: z54.number().optional(),
-  pin_number: z54.number().optional(),
-  display_pin_label: z54.string().optional(),
-  subcircuit_id: z54.string().optional(),
-  is_connected: z54.boolean().optional(),
-  has_input_arrow: z54.boolean().optional(),
-  has_output_arrow: z54.boolean().optional()
+  facing_direction: z55.enum(["up", "down", "left", "right"]).optional(),
+  distance_from_component_edge: z55.number().optional(),
+  side_of_component: z55.enum(["top", "bottom", "left", "right"]).optional(),
+  true_ccw_index: z55.number().optional(),
+  pin_number: z55.number().optional(),
+  display_pin_label: z55.string().optional(),
+  subcircuit_id: z55.string().optional(),
+  is_connected: z55.boolean().optional(),
+  has_input_arrow: z55.boolean().optional(),
+  has_output_arrow: z55.boolean().optional()
 }).describe("Defines a port on a schematic component");
 expectTypesMatch(true);
-var schematic_net_label = z55.object({
-  type: z55.literal("schematic_net_label"),
+var schematic_net_label = z56.object({
+  type: z56.literal("schematic_net_label"),
   schematic_net_label_id: getZodPrefixedIdWithDefault("schematic_net_label"),
-  schematic_trace_id: z55.string().optional(),
-  source_trace_id: z55.string().optional(),
-  source_net_id: z55.string(),
+  schematic_trace_id: z56.string().optional(),
+  source_trace_id: z56.string().optional(),
+  source_net_id: z56.string(),
   center: point,
   anchor_position: point.optional(),
-  anchor_side: z55.enum(["top", "bottom", "left", "right"]),
-  text: z55.string(),
-  symbol_name: z55.string().optional(),
-  is_movable: z55.boolean().optional(),
-  subcircuit_id: z55.string().optional()
+  anchor_side: z56.enum(["top", "bottom", "left", "right"]),
+  text: z56.string(),
+  symbol_name: z56.string().optional(),
+  is_movable: z56.boolean().optional(),
+  subcircuit_id: z56.string().optional()
 });
 expectTypesMatch(true);
-var schematic_error = z56.object({
-  type: z56.literal("schematic_error"),
-  schematic_error_id: z56.string(),
+var schematic_error = z57.object({
+  type: z57.literal("schematic_error"),
+  schematic_error_id: z57.string(),
   // eventually each error type should be broken out into a dir of files
-  error_type: z56.literal("schematic_port_not_found").default("schematic_port_not_found"),
-  message: z56.string(),
-  subcircuit_id: z56.string().optional()
+  error_type: z57.literal("schematic_port_not_found").default("schematic_port_not_found"),
+  message: z57.string(),
+  subcircuit_id: z57.string().optional()
 }).describe("Defines a schematic error on the schematic");
 expectTypesMatch(true);
-var schematic_layout_error = z57.object({
-  type: z57.literal("schematic_layout_error"),
+var schematic_layout_error = z58.object({
+  type: z58.literal("schematic_layout_error"),
   schematic_layout_error_id: getZodPrefixedIdWithDefault(
     "schematic_layout_error"
   ),
-  error_type: z57.literal("schematic_layout_error").default("schematic_layout_error"),
-  message: z57.string(),
-  source_group_id: z57.string(),
-  schematic_group_id: z57.string(),
-  subcircuit_id: z57.string().optional()
+  error_type: z58.literal("schematic_layout_error").default("schematic_layout_error"),
+  message: z58.string(),
+  source_group_id: z58.string(),
+  schematic_group_id: z58.string(),
+  subcircuit_id: z58.string().optional()
 }).describe("Error emitted when schematic layout fails for a group");
 expectTypesMatch(true);
-var schematic_debug_object_base = z58.object({
-  type: z58.literal("schematic_debug_object"),
-  label: z58.string().optional(),
-  subcircuit_id: z58.string().optional()
+var schematic_debug_object_base = z59.object({
+  type: z59.literal("schematic_debug_object"),
+  label: z59.string().optional(),
+  subcircuit_id: z59.string().optional()
 });
 var schematic_debug_rect = schematic_debug_object_base.extend({
-  shape: z58.literal("rect"),
+  shape: z59.literal("rect"),
   center: point,
   size
 });
 var schematic_debug_line = schematic_debug_object_base.extend({
-  shape: z58.literal("line"),
+  shape: z59.literal("line"),
   start: point,
   end: point
 });
 var schematic_debug_point = schematic_debug_object_base.extend({
-  shape: z58.literal("point"),
+  shape: z59.literal("point"),
   center: point
 });
-var schematic_debug_object = z58.discriminatedUnion("shape", [
+var schematic_debug_object = z59.discriminatedUnion("shape", [
   schematic_debug_rect,
   schematic_debug_line,
   schematic_debug_point
 ]);
 expectTypesMatch(true);
-var schematic_voltage_probe = z59.object({
-  type: z59.literal("schematic_voltage_probe"),
-  schematic_voltage_probe_id: z59.string(),
+var schematic_voltage_probe = z60.object({
+  type: z60.literal("schematic_voltage_probe"),
+  schematic_voltage_probe_id: z60.string(),
   position: point,
-  schematic_trace_id: z59.string(),
+  schematic_trace_id: z60.string(),
   voltage: voltage.optional(),
-  subcircuit_id: z59.string().optional()
+  subcircuit_id: z60.string().optional()
 }).describe("Defines a voltage probe measurement point on a schematic trace");
 expectTypesMatch(true);
-var schematic_manual_edit_conflict_warning = z60.object({
-  type: z60.literal("schematic_manual_edit_conflict_warning"),
+var schematic_manual_edit_conflict_warning = z61.object({
+  type: z61.literal("schematic_manual_edit_conflict_warning"),
   schematic_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "schematic_manual_edit_conflict_warning"
   ),
-  warning_type: z60.literal("schematic_manual_edit_conflict_warning").default("schematic_manual_edit_conflict_warning"),
-  message: z60.string(),
-  schematic_component_id: z60.string(),
-  schematic_group_id: z60.string().optional(),
-  subcircuit_id: z60.string().optional(),
-  source_component_id: z60.string()
+  warning_type: z61.literal("schematic_manual_edit_conflict_warning").default("schematic_manual_edit_conflict_warning"),
+  message: z61.string(),
+  schematic_component_id: z61.string(),
+  schematic_group_id: z61.string().optional(),
+  subcircuit_id: z61.string().optional(),
+  source_component_id: z61.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit schX/schY coordinates"
 );
 expectTypesMatch(true);
-var schematic_group = z61.object({
-  type: z61.literal("schematic_group"),
+var schematic_group = z62.object({
+  type: z62.literal("schematic_group"),
   schematic_group_id: getZodPrefixedIdWithDefault("schematic_group"),
-  source_group_id: z61.string(),
-  is_subcircuit: z61.boolean().optional(),
-  subcircuit_id: z61.string().optional(),
+  source_group_id: z62.string(),
+  is_subcircuit: z62.boolean().optional(),
+  subcircuit_id: z62.string().optional(),
   width: length,
   height: length,
   center: point,
-  schematic_component_ids: z61.array(z61.string()),
-  show_as_schematic_box: z61.boolean().optional(),
-  name: z61.string().optional(),
-  description: z61.string().optional()
+  schematic_component_ids: z62.array(z62.string()),
+  show_as_schematic_box: z62.boolean().optional(),
+  name: z62.string().optional(),
+  description: z62.string().optional()
 }).describe("Defines a group of components on the schematic");
 expectTypesMatch(true);
-var schematic_table = z62.object({
-  type: z62.literal("schematic_table"),
+var schematic_table = z63.object({
+  type: z63.literal("schematic_table"),
   schematic_table_id: getZodPrefixedIdWithDefault("schematic_table"),
   anchor_position: point,
-  column_widths: z62.array(distance),
-  row_heights: z62.array(distance),
+  column_widths: z63.array(distance),
+  row_heights: z63.array(distance),
   cell_padding: distance.optional(),
   border_width: distance.optional(),
-  subcircuit_id: z62.string().optional(),
-  schematic_component_id: z62.string().optional(),
+  subcircuit_id: z63.string().optional(),
+  schematic_component_id: z63.string().optional(),
   anchor: ninePointAnchor.optional()
 }).describe("Defines a table on the schematic");
 expectTypesMatch(true);
-var schematic_table_cell = z63.object({
-  type: z63.literal("schematic_table_cell"),
+var schematic_table_cell = z64.object({
+  type: z64.literal("schematic_table_cell"),
   schematic_table_cell_id: getZodPrefixedIdWithDefault(
     "schematic_table_cell"
   ),
-  schematic_table_id: z63.string(),
-  start_row_index: z63.number(),
-  end_row_index: z63.number(),
-  start_column_index: z63.number(),
-  end_column_index: z63.number(),
-  text: z63.string().optional(),
+  schematic_table_id: z64.string(),
+  start_row_index: z64.number(),
+  end_row_index: z64.number(),
+  start_column_index: z64.number(),
+  end_column_index: z64.number(),
+  text: z64.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  horizontal_align: z63.enum(["left", "center", "right"]).optional(),
-  vertical_align: z63.enum(["top", "middle", "bottom"]).optional(),
+  horizontal_align: z64.enum(["left", "center", "right"]).optional(),
+  vertical_align: z64.enum(["top", "middle", "bottom"]).optional(),
   font_size: distance.optional(),
-  subcircuit_id: z63.string().optional()
+  subcircuit_id: z64.string().optional()
 }).describe("Defines a cell within a schematic_table");
 expectTypesMatch(true);
-var point_with_bulge = z64.object({
+var schematic_sheet = z65.object({
+  type: z65.literal("schematic_sheet"),
+  schematic_sheet_id: getZodPrefixedIdWithDefault("schematic_sheet"),
+  name: z65.string().optional(),
+  subcircuit_id: z65.string().optional()
+}).describe(
+  "Defines a schematic sheet or page that components can be placed on"
+);
+expectTypesMatch(true);
+var point_with_bulge = z66.object({
   x: distance,
   y: distance,
-  bulge: z64.number().optional()
+  bulge: z66.number().optional()
 });
 expectTypesMatch(true);
-var ring = z64.object({
-  vertices: z64.array(point_with_bulge)
+var ring = z66.object({
+  vertices: z66.array(point_with_bulge)
 });
 expectTypesMatch(true);
-var brep_shape = z64.object({
+var brep_shape = z66.object({
   outer_ring: ring,
-  inner_rings: z64.array(ring).default([])
+  inner_rings: z66.array(ring).default([])
 });
 expectTypesMatch(true);
-var pcb_route_hint = z65.object({
+var pcb_route_hint = z67.object({
   x: distance,
   y: distance,
-  via: z65.boolean().optional(),
+  via: z67.boolean().optional(),
   via_to_layer: layer_ref.optional()
 });
-var pcb_route_hints = z65.array(pcb_route_hint);
+var pcb_route_hints = z67.array(pcb_route_hint);
 expectTypesMatch(true);
 expectTypesMatch(true);
-var route_hint_point = z66.object({
+var route_hint_point = z68.object({
   x: distance,
   y: distance,
-  via: z66.boolean().optional(),
+  via: z68.boolean().optional(),
   to_layer: layer_ref.optional(),
   trace_width: distance.optional()
 });
 expectTypesMatch(true);
-var pcb_component = z67.object({
-  type: z67.literal("pcb_component"),
+var pcb_component = z69.object({
+  type: z69.literal("pcb_component"),
   pcb_component_id: getZodPrefixedIdWithDefault("pcb_component"),
-  source_component_id: z67.string(),
+  source_component_id: z69.string(),
   center: point,
   layer: layer_ref,
   rotation,
   width: length,
   height: length,
-  do_not_place: z67.boolean().optional(),
-  subcircuit_id: z67.string().optional(),
-  pcb_group_id: z67.string().optional(),
-  obstructs_within_bounds: z67.boolean().default(true).describe(
+  do_not_place: z69.boolean().optional(),
+  subcircuit_id: z69.string().optional(),
+  pcb_group_id: z69.string().optional(),
+  obstructs_within_bounds: z69.boolean().default(true).describe(
     "Does this component take up all the space within its bounds on a layer. This is generally true except for when separated pin headers are being represented by a single component (in which case, chips can be placed between the pin headers) or for tall modules where chips fit underneath"
   )
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
-var pcb_hole_circle_or_square = z68.object({
-  type: z68.literal("pcb_hole"),
+var pcb_hole_circle_or_square = z70.object({
+  type: z70.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z68.string().optional(),
-  subcircuit_id: z68.string().optional(),
-  hole_shape: z68.enum(["circle", "square"]),
-  hole_diameter: z68.number(),
+  pcb_group_id: z70.string().optional(),
+  subcircuit_id: z70.string().optional(),
+  hole_shape: z70.enum(["circle", "square"]),
+  hole_diameter: z70.number(),
   x: distance,
   y: distance
 });
@@ -15948,14 +15978,14 @@ var pcb_hole_circle_or_square_shape = pcb_hole_circle_or_square.describe(
   "Defines a circular or square hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_oval = z68.object({
-  type: z68.literal("pcb_hole"),
+var pcb_hole_oval = z70.object({
+  type: z70.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z68.string().optional(),
-  subcircuit_id: z68.string().optional(),
-  hole_shape: z68.literal("oval"),
-  hole_width: z68.number(),
-  hole_height: z68.number(),
+  pcb_group_id: z70.string().optional(),
+  subcircuit_id: z70.string().optional(),
+  hole_shape: z70.literal("oval"),
+  hole_width: z70.number(),
+  hole_height: z70.number(),
   x: distance,
   y: distance
 });
@@ -15963,14 +15993,14 @@ var pcb_hole_oval_shape = pcb_hole_oval.describe(
   "Defines an oval hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_pill = z68.object({
-  type: z68.literal("pcb_hole"),
+var pcb_hole_pill = z70.object({
+  type: z70.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z68.string().optional(),
-  subcircuit_id: z68.string().optional(),
-  hole_shape: z68.literal("pill"),
-  hole_width: z68.number(),
-  hole_height: z68.number(),
+  pcb_group_id: z70.string().optional(),
+  subcircuit_id: z70.string().optional(),
+  hole_shape: z70.literal("pill"),
+  hole_width: z70.number(),
+  hole_height: z70.number(),
   x: distance,
   y: distance
 });
@@ -15978,14 +16008,14 @@ var pcb_hole_pill_shape = pcb_hole_pill.describe(
   "Defines a pill-shaped hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_rotated_pill = z68.object({
-  type: z68.literal("pcb_hole"),
+var pcb_hole_rotated_pill = z70.object({
+  type: z70.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z68.string().optional(),
-  subcircuit_id: z68.string().optional(),
-  hole_shape: z68.literal("rotated_pill"),
-  hole_width: z68.number(),
-  hole_height: z68.number(),
+  pcb_group_id: z70.string().optional(),
+  subcircuit_id: z70.string().optional(),
+  hole_shape: z70.literal("rotated_pill"),
+  hole_width: z70.number(),
+  hole_height: z70.number(),
   x: distance,
   y: distance,
   ccw_rotation: rotation
@@ -15995,107 +16025,107 @@ var pcb_hole_rotated_pill_shape = pcb_hole_rotated_pill.describe(
 );
 expectTypesMatch(true);
 var pcb_hole = pcb_hole_circle_or_square.or(pcb_hole_oval).or(pcb_hole_pill).or(pcb_hole_rotated_pill);
-var pcb_plated_hole_circle = z69.object({
-  type: z69.literal("pcb_plated_hole"),
-  shape: z69.literal("circle"),
-  pcb_group_id: z69.string().optional(),
-  subcircuit_id: z69.string().optional(),
-  outer_diameter: z69.number(),
-  hole_diameter: z69.number(),
+var pcb_plated_hole_circle = z71.object({
+  type: z71.literal("pcb_plated_hole"),
+  shape: z71.literal("circle"),
+  pcb_group_id: z71.string().optional(),
+  subcircuit_id: z71.string().optional(),
+  outer_diameter: z71.number(),
+  hole_diameter: z71.number(),
   x: distance,
   y: distance,
-  layers: z69.array(layer_ref),
-  port_hints: z69.array(z69.string()).optional(),
-  pcb_component_id: z69.string().optional(),
-  pcb_port_id: z69.string().optional(),
+  layers: z71.array(layer_ref),
+  port_hints: z71.array(z71.string()).optional(),
+  pcb_component_id: z71.string().optional(),
+  pcb_port_id: z71.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_plated_hole_oval = z69.object({
-  type: z69.literal("pcb_plated_hole"),
-  shape: z69.enum(["oval", "pill"]),
-  pcb_group_id: z69.string().optional(),
-  subcircuit_id: z69.string().optional(),
-  outer_width: z69.number(),
-  outer_height: z69.number(),
-  hole_width: z69.number(),
-  hole_height: z69.number(),
+var pcb_plated_hole_oval = z71.object({
+  type: z71.literal("pcb_plated_hole"),
+  shape: z71.enum(["oval", "pill"]),
+  pcb_group_id: z71.string().optional(),
+  subcircuit_id: z71.string().optional(),
+  outer_width: z71.number(),
+  outer_height: z71.number(),
+  hole_width: z71.number(),
+  hole_height: z71.number(),
   x: distance,
   y: distance,
   ccw_rotation: rotation,
-  layers: z69.array(layer_ref),
-  port_hints: z69.array(z69.string()).optional(),
-  pcb_component_id: z69.string().optional(),
-  pcb_port_id: z69.string().optional(),
+  layers: z71.array(layer_ref),
+  port_hints: z71.array(z71.string()).optional(),
+  pcb_component_id: z71.string().optional(),
+  pcb_port_id: z71.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_circular_hole_with_rect_pad = z69.object({
-  type: z69.literal("pcb_plated_hole"),
-  shape: z69.literal("circular_hole_with_rect_pad"),
-  pcb_group_id: z69.string().optional(),
-  subcircuit_id: z69.string().optional(),
-  hole_shape: z69.literal("circle"),
-  pad_shape: z69.literal("rect"),
-  hole_diameter: z69.number(),
-  rect_pad_width: z69.number(),
-  rect_pad_height: z69.number(),
-  rect_border_radius: z69.number().optional(),
+var pcb_circular_hole_with_rect_pad = z71.object({
+  type: z71.literal("pcb_plated_hole"),
+  shape: z71.literal("circular_hole_with_rect_pad"),
+  pcb_group_id: z71.string().optional(),
+  subcircuit_id: z71.string().optional(),
+  hole_shape: z71.literal("circle"),
+  pad_shape: z71.literal("rect"),
+  hole_diameter: z71.number(),
+  rect_pad_width: z71.number(),
+  rect_pad_height: z71.number(),
+  rect_border_radius: z71.number().optional(),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
   x: distance,
   y: distance,
-  layers: z69.array(layer_ref),
-  port_hints: z69.array(z69.string()).optional(),
-  pcb_component_id: z69.string().optional(),
-  pcb_port_id: z69.string().optional(),
+  layers: z71.array(layer_ref),
+  port_hints: z71.array(z71.string()).optional(),
+  pcb_component_id: z71.string().optional(),
+  pcb_port_id: z71.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_pill_hole_with_rect_pad = z69.object({
-  type: z69.literal("pcb_plated_hole"),
-  shape: z69.literal("pill_hole_with_rect_pad"),
-  pcb_group_id: z69.string().optional(),
-  subcircuit_id: z69.string().optional(),
-  hole_shape: z69.literal("pill"),
-  pad_shape: z69.literal("rect"),
-  hole_width: z69.number(),
-  hole_height: z69.number(),
-  rect_pad_width: z69.number(),
-  rect_pad_height: z69.number(),
-  rect_border_radius: z69.number().optional(),
+var pcb_pill_hole_with_rect_pad = z71.object({
+  type: z71.literal("pcb_plated_hole"),
+  shape: z71.literal("pill_hole_with_rect_pad"),
+  pcb_group_id: z71.string().optional(),
+  subcircuit_id: z71.string().optional(),
+  hole_shape: z71.literal("pill"),
+  pad_shape: z71.literal("rect"),
+  hole_width: z71.number(),
+  hole_height: z71.number(),
+  rect_pad_width: z71.number(),
+  rect_pad_height: z71.number(),
+  rect_border_radius: z71.number().optional(),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
   x: distance,
   y: distance,
-  layers: z69.array(layer_ref),
-  port_hints: z69.array(z69.string()).optional(),
-  pcb_component_id: z69.string().optional(),
-  pcb_port_id: z69.string().optional(),
+  layers: z71.array(layer_ref),
+  port_hints: z71.array(z71.string()).optional(),
+  pcb_component_id: z71.string().optional(),
+  pcb_port_id: z71.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_rotated_pill_hole_with_rect_pad = z69.object({
-  type: z69.literal("pcb_plated_hole"),
-  shape: z69.literal("rotated_pill_hole_with_rect_pad"),
-  pcb_group_id: z69.string().optional(),
-  subcircuit_id: z69.string().optional(),
-  hole_shape: z69.literal("rotated_pill"),
-  pad_shape: z69.literal("rect"),
-  hole_width: z69.number(),
-  hole_height: z69.number(),
+var pcb_rotated_pill_hole_with_rect_pad = z71.object({
+  type: z71.literal("pcb_plated_hole"),
+  shape: z71.literal("rotated_pill_hole_with_rect_pad"),
+  pcb_group_id: z71.string().optional(),
+  subcircuit_id: z71.string().optional(),
+  hole_shape: z71.literal("rotated_pill"),
+  pad_shape: z71.literal("rect"),
+  hole_width: z71.number(),
+  hole_height: z71.number(),
   hole_ccw_rotation: rotation,
-  rect_pad_width: z69.number(),
-  rect_pad_height: z69.number(),
-  rect_border_radius: z69.number().optional(),
+  rect_pad_width: z71.number(),
+  rect_pad_height: z71.number(),
+  rect_border_radius: z71.number().optional(),
   rect_ccw_rotation: rotation,
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
   x: distance,
   y: distance,
-  layers: z69.array(layer_ref),
-  port_hints: z69.array(z69.string()).optional(),
-  pcb_component_id: z69.string().optional(),
-  pcb_port_id: z69.string().optional(),
+  layers: z71.array(layer_ref),
+  port_hints: z71.array(z71.string()).optional(),
+  pcb_component_id: z71.string().optional(),
+  pcb_port_id: z71.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_plated_hole = z69.union([
+var pcb_plated_hole = z71.union([
   pcb_plated_hole_circle,
   pcb_plated_hole_oval,
   pcb_circular_hole_with_rect_pad,
@@ -16109,118 +16139,120 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
-var pcb_port = z70.object({
-  type: z70.literal("pcb_port"),
+var pcb_port = z72.object({
+  type: z72.literal("pcb_port"),
   pcb_port_id: getZodPrefixedIdWithDefault("pcb_port"),
-  pcb_group_id: z70.string().optional(),
-  subcircuit_id: z70.string().optional(),
-  source_port_id: z70.string(),
-  pcb_component_id: z70.string(),
+  pcb_group_id: z72.string().optional(),
+  subcircuit_id: z72.string().optional(),
+  source_port_id: z72.string(),
+  pcb_component_id: z72.string().optional(),
   x: distance,
   y: distance,
-  layers: z70.array(layer_ref),
-  is_board_pinout: z70.boolean().optional()
+  layers: z72.array(layer_ref),
+  is_board_pinout: z72.boolean().optional()
 }).describe("Defines a port on the PCB");
 expectTypesMatch(true);
-var pcb_smtpad_circle = z71.object({
-  type: z71.literal("pcb_smtpad"),
-  shape: z71.literal("circle"),
+var pcb_smtpad_circle = z73.object({
+  type: z73.literal("pcb_smtpad"),
+  shape: z73.literal("circle"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
   x: distance,
   y: distance,
-  radius: z71.number(),
+  radius: z73.number(),
   layer: layer_ref,
-  port_hints: z71.array(z71.string()).optional(),
-  pcb_component_id: z71.string().optional(),
-  pcb_port_id: z71.string().optional(),
-  is_covered_with_solder_mask: z71.boolean().optional()
-});
-var pcb_smtpad_rect = z71.object({
-  type: z71.literal("pcb_smtpad"),
-  shape: z71.literal("rect"),
+  port_hints: z73.array(z73.string()).optional(),
+  pcb_component_id: z73.string().optional(),
+  pcb_port_id: z73.string().optional(),
+  is_covered_with_solder_mask: z73.boolean().optional()
+});
+var pcb_smtpad_rect = z73.object({
+  type: z73.literal("pcb_smtpad"),
+  shape: z73.literal("rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
   x: distance,
   y: distance,
-  width: z71.number(),
-  height: z71.number(),
-  rect_border_radius: z71.number().optional(),
+  width: z73.number(),
+  height: z73.number(),
+  rect_border_radius: z73.number().optional(),
+  corner_radius: z73.number().optional(),
   layer: layer_ref,
-  port_hints: z71.array(z71.string()).optional(),
-  pcb_component_id: z71.string().optional(),
-  pcb_port_id: z71.string().optional(),
-  is_covered_with_solder_mask: z71.boolean().optional()
-});
-var pcb_smtpad_rotated_rect = z71.object({
-  type: z71.literal("pcb_smtpad"),
-  shape: z71.literal("rotated_rect"),
+  port_hints: z73.array(z73.string()).optional(),
+  pcb_component_id: z73.string().optional(),
+  pcb_port_id: z73.string().optional(),
+  is_covered_with_solder_mask: z73.boolean().optional()
+});
+var pcb_smtpad_rotated_rect = z73.object({
+  type: z73.literal("pcb_smtpad"),
+  shape: z73.literal("rotated_rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
   x: distance,
   y: distance,
-  width: z71.number(),
-  height: z71.number(),
-  rect_border_radius: z71.number().optional(),
+  width: z73.number(),
+  height: z73.number(),
+  rect_border_radius: z73.number().optional(),
+  corner_radius: z73.number().optional(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z71.array(z71.string()).optional(),
-  pcb_component_id: z71.string().optional(),
-  pcb_port_id: z71.string().optional(),
-  is_covered_with_solder_mask: z71.boolean().optional()
-});
-var pcb_smtpad_pill = z71.object({
-  type: z71.literal("pcb_smtpad"),
-  shape: z71.literal("pill"),
+  port_hints: z73.array(z73.string()).optional(),
+  pcb_component_id: z73.string().optional(),
+  pcb_port_id: z73.string().optional(),
+  is_covered_with_solder_mask: z73.boolean().optional()
+});
+var pcb_smtpad_pill = z73.object({
+  type: z73.literal("pcb_smtpad"),
+  shape: z73.literal("pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
   x: distance,
   y: distance,
-  width: z71.number(),
-  height: z71.number(),
-  radius: z71.number(),
+  width: z73.number(),
+  height: z73.number(),
+  radius: z73.number(),
   layer: layer_ref,
-  port_hints: z71.array(z71.string()).optional(),
-  pcb_component_id: z71.string().optional(),
-  pcb_port_id: z71.string().optional(),
-  is_covered_with_solder_mask: z71.boolean().optional()
-});
-var pcb_smtpad_rotated_pill = z71.object({
-  type: z71.literal("pcb_smtpad"),
-  shape: z71.literal("rotated_pill"),
+  port_hints: z73.array(z73.string()).optional(),
+  pcb_component_id: z73.string().optional(),
+  pcb_port_id: z73.string().optional(),
+  is_covered_with_solder_mask: z73.boolean().optional()
+});
+var pcb_smtpad_rotated_pill = z73.object({
+  type: z73.literal("pcb_smtpad"),
+  shape: z73.literal("rotated_pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
   x: distance,
   y: distance,
-  width: z71.number(),
-  height: z71.number(),
-  radius: z71.number(),
+  width: z73.number(),
+  height: z73.number(),
+  radius: z73.number(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z71.array(z71.string()).optional(),
-  pcb_component_id: z71.string().optional(),
-  pcb_port_id: z71.string().optional(),
-  is_covered_with_solder_mask: z71.boolean().optional()
-});
-var pcb_smtpad_polygon = z71.object({
-  type: z71.literal("pcb_smtpad"),
-  shape: z71.literal("polygon"),
+  port_hints: z73.array(z73.string()).optional(),
+  pcb_component_id: z73.string().optional(),
+  pcb_port_id: z73.string().optional(),
+  is_covered_with_solder_mask: z73.boolean().optional()
+});
+var pcb_smtpad_polygon = z73.object({
+  type: z73.literal("pcb_smtpad"),
+  shape: z73.literal("polygon"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
-  points: z71.array(point),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
+  points: z73.array(point),
   layer: layer_ref,
-  port_hints: z71.array(z71.string()).optional(),
-  pcb_component_id: z71.string().optional(),
-  pcb_port_id: z71.string().optional(),
-  is_covered_with_solder_mask: z71.boolean().optional()
+  port_hints: z73.array(z73.string()).optional(),
+  pcb_component_id: z73.string().optional(),
+  pcb_port_id: z73.string().optional(),
+  is_covered_with_solder_mask: z73.boolean().optional()
 });
-var pcb_smtpad = z71.discriminatedUnion("shape", [
+var pcb_smtpad = z73.discriminatedUnion("shape", [
   pcb_smtpad_circle,
   pcb_smtpad_rect,
   pcb_smtpad_rotated_rect,
@@ -16234,78 +16266,78 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
-var pcb_solder_paste_circle = z72.object({
-  type: z72.literal("pcb_solder_paste"),
-  shape: z72.literal("circle"),
+var pcb_solder_paste_circle = z74.object({
+  type: z74.literal("pcb_solder_paste"),
+  shape: z74.literal("circle"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
+  pcb_group_id: z74.string().optional(),
+  subcircuit_id: z74.string().optional(),
   x: distance,
   y: distance,
-  radius: z72.number(),
+  radius: z74.number(),
   layer: layer_ref,
-  pcb_component_id: z72.string().optional(),
-  pcb_smtpad_id: z72.string().optional()
+  pcb_component_id: z74.string().optional(),
+  pcb_smtpad_id: z74.string().optional()
 });
-var pcb_solder_paste_rect = z72.object({
-  type: z72.literal("pcb_solder_paste"),
-  shape: z72.literal("rect"),
+var pcb_solder_paste_rect = z74.object({
+  type: z74.literal("pcb_solder_paste"),
+  shape: z74.literal("rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
+  pcb_group_id: z74.string().optional(),
+  subcircuit_id: z74.string().optional(),
   x: distance,
   y: distance,
-  width: z72.number(),
-  height: z72.number(),
+  width: z74.number(),
+  height: z74.number(),
   layer: layer_ref,
-  pcb_component_id: z72.string().optional(),
-  pcb_smtpad_id: z72.string().optional()
+  pcb_component_id: z74.string().optional(),
+  pcb_smtpad_id: z74.string().optional()
 });
-var pcb_solder_paste_pill = z72.object({
-  type: z72.literal("pcb_solder_paste"),
-  shape: z72.literal("pill"),
+var pcb_solder_paste_pill = z74.object({
+  type: z74.literal("pcb_solder_paste"),
+  shape: z74.literal("pill"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
+  pcb_group_id: z74.string().optional(),
+  subcircuit_id: z74.string().optional(),
   x: distance,
   y: distance,
-  width: z72.number(),
-  height: z72.number(),
-  radius: z72.number(),
+  width: z74.number(),
+  height: z74.number(),
+  radius: z74.number(),
   layer: layer_ref,
-  pcb_component_id: z72.string().optional(),
-  pcb_smtpad_id: z72.string().optional()
+  pcb_component_id: z74.string().optional(),
+  pcb_smtpad_id: z74.string().optional()
 });
-var pcb_solder_paste_rotated_rect = z72.object({
-  type: z72.literal("pcb_solder_paste"),
-  shape: z72.literal("rotated_rect"),
+var pcb_solder_paste_rotated_rect = z74.object({
+  type: z74.literal("pcb_solder_paste"),
+  shape: z74.literal("rotated_rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
+  pcb_group_id: z74.string().optional(),
+  subcircuit_id: z74.string().optional(),
   x: distance,
   y: distance,
-  width: z72.number(),
-  height: z72.number(),
+  width: z74.number(),
+  height: z74.number(),
   ccw_rotation: distance,
   layer: layer_ref,
-  pcb_component_id: z72.string().optional(),
-  pcb_smtpad_id: z72.string().optional()
+  pcb_component_id: z74.string().optional(),
+  pcb_smtpad_id: z74.string().optional()
 });
-var pcb_solder_paste_oval = z72.object({
-  type: z72.literal("pcb_solder_paste"),
-  shape: z72.literal("oval"),
+var pcb_solder_paste_oval = z74.object({
+  type: z74.literal("pcb_solder_paste"),
+  shape: z74.literal("oval"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
+  pcb_group_id: z74.string().optional(),
+  subcircuit_id: z74.string().optional(),
   x: distance,
   y: distance,
-  width: z72.number(),
-  height: z72.number(),
+  width: z74.number(),
+  height: z74.number(),
   layer: layer_ref,
-  pcb_component_id: z72.string().optional(),
-  pcb_smtpad_id: z72.string().optional()
+  pcb_component_id: z74.string().optional(),
+  pcb_smtpad_id: z74.string().optional()
 });
-var pcb_solder_paste = z72.union([
+var pcb_solder_paste = z74.union([
   pcb_solder_paste_circle,
   pcb_solder_paste_rect,
   pcb_solder_paste_pill,
@@ -16319,123 +16351,123 @@ expectTypesMatch(
   true
 );
 expectTypesMatch(true);
-var pcb_text = z73.object({
-  type: z73.literal("pcb_text"),
+var pcb_text = z75.object({
+  type: z75.literal("pcb_text"),
   pcb_text_id: getZodPrefixedIdWithDefault("pcb_text"),
-  pcb_group_id: z73.string().optional(),
-  subcircuit_id: z73.string().optional(),
-  text: z73.string(),
+  pcb_group_id: z75.string().optional(),
+  subcircuit_id: z75.string().optional(),
+  text: z75.string(),
   center: point,
   layer: layer_ref,
   width: length,
   height: length,
-  lines: z73.number(),
+  lines: z75.number(),
   // @ts-ignore
-  align: z73.enum(["bottom-left"])
+  align: z75.enum(["bottom-left"])
 }).describe("Defines text on the PCB");
 expectTypesMatch(true);
-var pcb_trace_route_point_wire = z74.object({
-  route_type: z74.literal("wire"),
+var pcb_trace_route_point_wire = z76.object({
+  route_type: z76.literal("wire"),
   x: distance,
   y: distance,
   width: distance,
-  start_pcb_port_id: z74.string().optional(),
-  end_pcb_port_id: z74.string().optional(),
+  start_pcb_port_id: z76.string().optional(),
+  end_pcb_port_id: z76.string().optional(),
   layer: layer_ref
 });
-var pcb_trace_route_point_via = z74.object({
-  route_type: z74.literal("via"),
+var pcb_trace_route_point_via = z76.object({
+  route_type: z76.literal("via"),
   x: distance,
   y: distance,
   hole_diameter: distance.optional(),
   outer_diameter: distance.optional(),
-  from_layer: z74.string(),
-  to_layer: z74.string()
+  from_layer: z76.string(),
+  to_layer: z76.string()
 });
-var pcb_trace_route_point = z74.union([
+var pcb_trace_route_point = z76.union([
   pcb_trace_route_point_wire,
   pcb_trace_route_point_via
 ]);
-var pcb_trace = z74.object({
-  type: z74.literal("pcb_trace"),
-  source_trace_id: z74.string().optional(),
-  pcb_component_id: z74.string().optional(),
+var pcb_trace = z76.object({
+  type: z76.literal("pcb_trace"),
+  source_trace_id: z76.string().optional(),
+  pcb_component_id: z76.string().optional(),
   pcb_trace_id: getZodPrefixedIdWithDefault("pcb_trace"),
-  pcb_group_id: z74.string().optional(),
-  subcircuit_id: z74.string().optional(),
-  route_thickness_mode: z74.enum(["constant", "interpolated"]).default("constant").optional(),
-  route_order_index: z74.number().optional(),
-  should_round_corners: z74.boolean().optional(),
-  trace_length: z74.number().optional(),
-  highlight_color: z74.string().optional(),
-  route: z74.array(pcb_trace_route_point)
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
+  route_thickness_mode: z76.enum(["constant", "interpolated"]).default("constant").optional(),
+  route_order_index: z76.number().optional(),
+  should_round_corners: z76.boolean().optional(),
+  trace_length: z76.number().optional(),
+  highlight_color: z76.string().optional(),
+  route: z76.array(pcb_trace_route_point)
 }).describe("Defines a trace on the PCB");
 expectTypesMatch(true);
 expectTypesMatch(true);
-var pcb_trace_error = z75.object({
-  type: z75.literal("pcb_trace_error"),
+var pcb_trace_error = z77.object({
+  type: z77.literal("pcb_trace_error"),
   pcb_trace_error_id: getZodPrefixedIdWithDefault("pcb_trace_error"),
-  error_type: z75.literal("pcb_trace_error").default("pcb_trace_error"),
-  message: z75.string(),
+  error_type: z77.literal("pcb_trace_error").default("pcb_trace_error"),
+  message: z77.string(),
   center: point.optional(),
-  pcb_trace_id: z75.string(),
-  source_trace_id: z75.string(),
-  pcb_component_ids: z75.array(z75.string()),
-  pcb_port_ids: z75.array(z75.string()),
-  subcircuit_id: z75.string().optional()
+  pcb_trace_id: z77.string(),
+  source_trace_id: z77.string(),
+  pcb_component_ids: z77.array(z77.string()),
+  pcb_port_ids: z77.array(z77.string()),
+  subcircuit_id: z77.string().optional()
 }).describe("Defines a trace error on the PCB");
 expectTypesMatch(true);
-var pcb_trace_missing_error = z76.object({
-  type: z76.literal("pcb_trace_missing_error"),
+var pcb_trace_missing_error = z78.object({
+  type: z78.literal("pcb_trace_missing_error"),
   pcb_trace_missing_error_id: getZodPrefixedIdWithDefault(
     "pcb_trace_missing_error"
   ),
-  error_type: z76.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
-  message: z76.string(),
+  error_type: z78.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
+  message: z78.string(),
   center: point.optional(),
-  source_trace_id: z76.string(),
-  pcb_component_ids: z76.array(z76.string()),
-  pcb_port_ids: z76.array(z76.string()),
-  subcircuit_id: z76.string().optional()
+  source_trace_id: z78.string(),
+  pcb_component_ids: z78.array(z78.string()),
+  pcb_port_ids: z78.array(z78.string()),
+  subcircuit_id: z78.string().optional()
 }).describe(
   "Defines an error when a source trace has no corresponding PCB trace"
 );
 expectTypesMatch(true);
-var pcb_port_not_matched_error = z77.object({
-  type: z77.literal("pcb_port_not_matched_error"),
+var pcb_port_not_matched_error = z79.object({
+  type: z79.literal("pcb_port_not_matched_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z77.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
-  message: z77.string(),
-  pcb_component_ids: z77.array(z77.string()),
-  subcircuit_id: z77.string().optional()
+  error_type: z79.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
+  message: z79.string(),
+  pcb_component_ids: z79.array(z79.string()),
+  subcircuit_id: z79.string().optional()
 }).describe("Defines a trace error on the PCB where a port is not matched");
 expectTypesMatch(true);
-var pcb_port_not_connected_error = z78.object({
-  type: z78.literal("pcb_port_not_connected_error"),
+var pcb_port_not_connected_error = z80.object({
+  type: z80.literal("pcb_port_not_connected_error"),
   pcb_port_not_connected_error_id: getZodPrefixedIdWithDefault(
     "pcb_port_not_connected_error"
   ),
-  error_type: z78.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
-  message: z78.string(),
-  pcb_port_ids: z78.array(z78.string()),
-  pcb_component_ids: z78.array(z78.string()),
-  subcircuit_id: z78.string().optional()
+  error_type: z80.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
+  message: z80.string(),
+  pcb_port_ids: z80.array(z80.string()),
+  pcb_component_ids: z80.array(z80.string()),
+  subcircuit_id: z80.string().optional()
 }).describe("Defines an error when a pcb port is not connected to any trace");
 expectTypesMatch(
   true
 );
-var pcb_net = z79.object({
-  type: z79.literal("pcb_net"),
+var pcb_net = z81.object({
+  type: z81.literal("pcb_net"),
   pcb_net_id: getZodPrefixedIdWithDefault("pcb_net"),
-  source_net_id: z79.string().optional(),
-  highlight_color: z79.string().optional()
+  source_net_id: z81.string().optional(),
+  highlight_color: z81.string().optional()
 }).describe("Defines a net on the PCB");
 expectTypesMatch(true);
-var pcb_via = z80.object({
-  type: z80.literal("pcb_via"),
+var pcb_via = z82.object({
+  type: z82.literal("pcb_via"),
   pcb_via_id: getZodPrefixedIdWithDefault("pcb_via"),
-  pcb_group_id: z80.string().optional(),
-  subcircuit_id: z80.string().optional(),
+  pcb_group_id: z82.string().optional(),
+  subcircuit_id: z82.string().optional(),
   x: distance,
   y: distance,
   outer_diameter: distance.default("0.6mm"),
@@ -16444,47 +16476,58 @@ var pcb_via = z80.object({
   from_layer: layer_ref.optional(),
   /** @deprecated */
   to_layer: layer_ref.optional(),
-  layers: z80.array(layer_ref),
-  pcb_trace_id: z80.string().optional()
+  layers: z82.array(layer_ref),
+  pcb_trace_id: z82.string().optional(),
+  net_is_assignable: z82.boolean().optional(),
+  net_assigned: z82.boolean().optional()
 }).describe("Defines a via on the PCB");
 expectTypesMatch(true);
-var pcb_board = z81.object({
-  type: z81.literal("pcb_board"),
+var pcb_board = z83.object({
+  type: z83.literal("pcb_board"),
   pcb_board_id: getZodPrefixedIdWithDefault("pcb_board"),
-  is_subcircuit: z81.boolean().optional(),
-  subcircuit_id: z81.string().optional(),
+  pcb_panel_id: z83.string().optional(),
+  is_subcircuit: z83.boolean().optional(),
+  subcircuit_id: z83.string().optional(),
   width: length,
   height: length,
   center: point,
   thickness: length.optional().default(1.4),
-  num_layers: z81.number().optional().default(4),
-  outline: z81.array(point).optional(),
-  material: z81.enum(["fr4", "fr1"]).default("fr4")
+  num_layers: z83.number().optional().default(4),
+  outline: z83.array(point).optional(),
+  material: z83.enum(["fr4", "fr1"]).default("fr4")
 }).describe("Defines the board outline of the PCB");
 expectTypesMatch(true);
-var pcb_placement_error = z82.object({
-  type: z82.literal("pcb_placement_error"),
+var pcb_panel = z84.object({
+  type: z84.literal("pcb_panel"),
+  pcb_panel_id: getZodPrefixedIdWithDefault("pcb_panel"),
+  width: length,
+  height: length,
+  covered_with_solder_mask: z84.boolean().optional().default(true)
+}).describe("Defines a PCB panel that can contain multiple boards");
+expectTypesMatch(true);
+var pcb_placement_error = z85.object({
+  type: z85.literal("pcb_placement_error"),
   pcb_placement_error_id: getZodPrefixedIdWithDefault("pcb_placement_error"),
-  error_type: z82.literal("pcb_placement_error").default("pcb_placement_error"),
-  message: z82.string(),
-  subcircuit_id: z82.string().optional()
+  error_type: z85.literal("pcb_placement_error").default("pcb_placement_error"),
+  message: z85.string(),
+  subcircuit_id: z85.string().optional()
 }).describe("Defines a placement error on the PCB");
 expectTypesMatch(true);
-var pcb_trace_hint = z83.object({
-  type: z83.literal("pcb_trace_hint"),
+var pcb_trace_hint = z86.object({
+  type: z86.literal("pcb_trace_hint"),
   pcb_trace_hint_id: getZodPrefixedIdWithDefault("pcb_trace_hint"),
-  pcb_port_id: z83.string(),
-  pcb_component_id: z83.string(),
-  route: z83.array(route_hint_point),
-  subcircuit_id: z83.string().optional()
+  pcb_port_id: z86.string(),
+  pcb_component_id: z86.string(),
+  route: z86.array(route_hint_point),
+  subcircuit_id: z86.string().optional()
 }).describe("A hint that can be used during generation of a PCB trace");
 expectTypesMatch(true);
-var pcb_silkscreen_line = z84.object({
-  type: z84.literal("pcb_silkscreen_line"),
+var pcb_silkscreen_line = z87.object({
+  type: z87.literal("pcb_silkscreen_line"),
   pcb_silkscreen_line_id: getZodPrefixedIdWithDefault("pcb_silkscreen_line"),
-  pcb_component_id: z84.string(),
-  pcb_group_id: z84.string().optional(),
-  subcircuit_id: z84.string().optional(),
+  pcb_component_id: z87.string(),
+  pcb_group_id: z87.string().optional(),
+  subcircuit_id: z87.string().optional(),
   stroke_width: distance.default("0.1mm"),
   x1: distance,
   y1: distance,
@@ -16493,28 +16536,28 @@ var pcb_silkscreen_line = z84.object({
   layer: visible_layer
 }).describe("Defines a silkscreen line on the PCB");
 expectTypesMatch(true);
-var pcb_silkscreen_path = z85.object({
-  type: z85.literal("pcb_silkscreen_path"),
+var pcb_silkscreen_path = z88.object({
+  type: z88.literal("pcb_silkscreen_path"),
   pcb_silkscreen_path_id: getZodPrefixedIdWithDefault("pcb_silkscreen_path"),
-  pcb_component_id: z85.string(),
-  pcb_group_id: z85.string().optional(),
-  subcircuit_id: z85.string().optional(),
+  pcb_component_id: z88.string(),
+  pcb_group_id: z88.string().optional(),
+  subcircuit_id: z88.string().optional(),
   layer: visible_layer,
-  route: z85.array(point),
+  route: z88.array(point),
   stroke_width: length
 }).describe("Defines a silkscreen path on the PCB");
 expectTypesMatch(true);
-var pcb_silkscreen_text = z86.object({
-  type: z86.literal("pcb_silkscreen_text"),
+var pcb_silkscreen_text = z89.object({
+  type: z89.literal("pcb_silkscreen_text"),
   pcb_silkscreen_text_id: getZodPrefixedIdWithDefault("pcb_silkscreen_text"),
-  pcb_group_id: z86.string().optional(),
-  subcircuit_id: z86.string().optional(),
-  font: z86.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z89.string().optional(),
+  subcircuit_id: z89.string().optional(),
+  font: z89.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z86.string(),
-  text: z86.string(),
-  is_knockout: z86.boolean().default(false).optional(),
-  knockout_padding: z86.object({
+  pcb_component_id: z89.string(),
+  text: z89.string(),
+  is_knockout: z89.boolean().default(false).optional(),
+  knockout_padding: z89.object({
     left: length,
     top: length,
     bottom: length,
@@ -16525,248 +16568,299 @@ var pcb_silkscreen_text = z86.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z86.number().optional(),
+  ccw_rotation: z89.number().optional(),
   layer: layer_ref,
-  is_mirrored: z86.boolean().default(false).optional(),
+  is_mirrored: z89.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines silkscreen text on the PCB");
 expectTypesMatch(true);
-var pcb_silkscreen_rect = z87.object({
-  type: z87.literal("pcb_silkscreen_rect"),
+var pcb_copper_text = z90.object({
+  type: z90.literal("pcb_copper_text"),
+  pcb_copper_text_id: getZodPrefixedIdWithDefault("pcb_copper_text"),
+  pcb_group_id: z90.string().optional(),
+  subcircuit_id: z90.string().optional(),
+  font: z90.literal("tscircuit2024").default("tscircuit2024"),
+  font_size: distance.default("0.2mm"),
+  pcb_component_id: z90.string(),
+  text: z90.string(),
+  is_knockout: z90.boolean().default(false).optional(),
+  knockout_padding: z90.object({
+    left: length,
+    top: length,
+    bottom: length,
+    right: length
+  }).default({
+    left: "0.2mm",
+    top: "0.2mm",
+    bottom: "0.2mm",
+    right: "0.2mm"
+  }).optional(),
+  ccw_rotation: z90.number().optional(),
+  layer: layer_ref,
+  is_mirrored: z90.boolean().default(false).optional(),
+  anchor_position: point.default({ x: 0, y: 0 }),
+  anchor_alignment: ninePointAnchor.default("center")
+}).describe("Defines copper text on the PCB");
+expectTypesMatch(true);
+var pcb_silkscreen_rect = z91.object({
+  type: z91.literal("pcb_silkscreen_rect"),
   pcb_silkscreen_rect_id: getZodPrefixedIdWithDefault("pcb_silkscreen_rect"),
-  pcb_component_id: z87.string(),
-  pcb_group_id: z87.string().optional(),
-  subcircuit_id: z87.string().optional(),
+  pcb_component_id: z91.string(),
+  pcb_group_id: z91.string().optional(),
+  subcircuit_id: z91.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: layer_ref,
   stroke_width: length.default("1mm"),
-  is_filled: z87.boolean().default(true).optional(),
-  has_stroke: z87.boolean().optional(),
-  is_stroke_dashed: z87.boolean().optional()
+  corner_radius: length.optional(),
+  is_filled: z91.boolean().default(true).optional(),
+  has_stroke: z91.boolean().optional(),
+  is_stroke_dashed: z91.boolean().optional()
 }).describe("Defines a silkscreen rect on the PCB");
 expectTypesMatch(true);
-var pcb_silkscreen_circle = z88.object({
-  type: z88.literal("pcb_silkscreen_circle"),
+var pcb_silkscreen_circle = z92.object({
+  type: z92.literal("pcb_silkscreen_circle"),
   pcb_silkscreen_circle_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_circle"
   ),
-  pcb_component_id: z88.string(),
-  pcb_group_id: z88.string().optional(),
-  subcircuit_id: z88.string().optional(),
+  pcb_component_id: z92.string(),
+  pcb_group_id: z92.string().optional(),
+  subcircuit_id: z92.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
   stroke_width: length.default("1mm")
 }).describe("Defines a silkscreen circle on the PCB");
 expectTypesMatch(true);
-var pcb_silkscreen_oval = z89.object({
-  type: z89.literal("pcb_silkscreen_oval"),
+var pcb_silkscreen_oval = z93.object({
+  type: z93.literal("pcb_silkscreen_oval"),
   pcb_silkscreen_oval_id: getZodPrefixedIdWithDefault("pcb_silkscreen_oval"),
-  pcb_component_id: z89.string(),
-  pcb_group_id: z89.string().optional(),
-  subcircuit_id: z89.string().optional(),
+  pcb_component_id: z93.string(),
+  pcb_group_id: z93.string().optional(),
+  subcircuit_id: z93.string().optional(),
   center: point,
   radius_x: distance,
   radius_y: distance,
   layer: visible_layer
 }).describe("Defines a silkscreen oval on the PCB");
 expectTypesMatch(true);
-var pcb_fabrication_note_text = z90.object({
-  type: z90.literal("pcb_fabrication_note_text"),
+var pcb_fabrication_note_text = z94.object({
+  type: z94.literal("pcb_fabrication_note_text"),
   pcb_fabrication_note_text_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_text"
   ),
-  subcircuit_id: z90.string().optional(),
-  pcb_group_id: z90.string().optional(),
-  font: z90.literal("tscircuit2024").default("tscircuit2024"),
+  subcircuit_id: z94.string().optional(),
+  pcb_group_id: z94.string().optional(),
+  font: z94.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  pcb_component_id: z90.string(),
-  text: z90.string(),
+  pcb_component_id: z94.string(),
+  text: z94.string(),
   layer: visible_layer,
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z90.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z90.string().optional()
+  anchor_alignment: z94.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  color: z94.string().optional()
 }).describe(
   "Defines a fabrication note in text on the PCB, useful for leaving notes for assemblers or fabricators"
 );
 expectTypesMatch(true);
-var pcb_fabrication_note_path = z91.object({
-  type: z91.literal("pcb_fabrication_note_path"),
+var pcb_fabrication_note_path = z95.object({
+  type: z95.literal("pcb_fabrication_note_path"),
   pcb_fabrication_note_path_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_path"
   ),
-  pcb_component_id: z91.string(),
-  subcircuit_id: z91.string().optional(),
+  pcb_component_id: z95.string(),
+  subcircuit_id: z95.string().optional(),
   layer: layer_ref,
-  route: z91.array(point),
+  route: z95.array(point),
   stroke_width: length,
-  color: z91.string().optional()
+  color: z95.string().optional()
 }).describe(
   "Defines a fabrication path on the PCB for fabricators or assemblers"
 );
 expectTypesMatch(true);
-var pcb_fabrication_note_rect = z92.object({
-  type: z92.literal("pcb_fabrication_note_rect"),
+var pcb_fabrication_note_rect = z96.object({
+  type: z96.literal("pcb_fabrication_note_rect"),
   pcb_fabrication_note_rect_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_rect"
   ),
-  pcb_component_id: z92.string(),
-  pcb_group_id: z92.string().optional(),
-  subcircuit_id: z92.string().optional(),
+  pcb_component_id: z96.string(),
+  pcb_group_id: z96.string().optional(),
+  subcircuit_id: z96.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   stroke_width: length.default("0.1mm"),
-  is_filled: z92.boolean().optional(),
-  has_stroke: z92.boolean().optional(),
-  is_stroke_dashed: z92.boolean().optional(),
-  color: z92.string().optional()
+  corner_radius: length.optional(),
+  is_filled: z96.boolean().optional(),
+  has_stroke: z96.boolean().optional(),
+  is_stroke_dashed: z96.boolean().optional(),
+  color: z96.string().optional()
 }).describe("Defines a fabrication note rectangle on the PCB");
 expectTypesMatch(true);
-var pcb_fabrication_note_dimension = z93.object({
-  type: z93.literal("pcb_fabrication_note_dimension"),
+var pcb_fabrication_note_dimension = z97.object({
+  type: z97.literal("pcb_fabrication_note_dimension"),
   pcb_fabrication_note_dimension_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_dimension"
   ),
-  pcb_component_id: z93.string(),
-  pcb_group_id: z93.string().optional(),
-  subcircuit_id: z93.string().optional(),
+  pcb_component_id: z97.string(),
+  pcb_group_id: z97.string().optional(),
+  subcircuit_id: z97.string().optional(),
   layer: visible_layer,
   from: point,
   to: point,
-  text: z93.string().optional(),
+  text: z97.string().optional(),
+  text_ccw_rotation: z97.number().optional(),
   offset: length.optional(),
-  font: z93.literal("tscircuit2024").default("tscircuit2024"),
+  offset_distance: length.optional(),
+  offset_direction: z97.object({
+    x: z97.number(),
+    y: z97.number()
+  }).optional(),
+  font: z97.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
-  color: z93.string().optional(),
+  color: z97.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB fabrication notes");
 expectTypesMatch(true);
-var pcb_note_text = z94.object({
-  type: z94.literal("pcb_note_text"),
+var pcb_note_text = z98.object({
+  type: z98.literal("pcb_note_text"),
   pcb_note_text_id: getZodPrefixedIdWithDefault("pcb_note_text"),
-  pcb_component_id: z94.string().optional(),
-  pcb_group_id: z94.string().optional(),
-  subcircuit_id: z94.string().optional(),
-  font: z94.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_component_id: z98.string().optional(),
+  pcb_group_id: z98.string().optional(),
+  subcircuit_id: z98.string().optional(),
+  name: z98.string().optional(),
+  font: z98.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  text: z94.string(),
+  text: z98.string().optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z94.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z94.string().optional()
+  anchor_alignment: z98.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  color: z98.string().optional()
 }).describe("Defines a documentation note in text on the PCB");
 expectTypesMatch(true);
-var pcb_note_rect = z95.object({
-  type: z95.literal("pcb_note_rect"),
+var pcb_note_rect = z99.object({
+  type: z99.literal("pcb_note_rect"),
   pcb_note_rect_id: getZodPrefixedIdWithDefault("pcb_note_rect"),
-  pcb_component_id: z95.string().optional(),
-  pcb_group_id: z95.string().optional(),
-  subcircuit_id: z95.string().optional(),
+  pcb_component_id: z99.string().optional(),
+  pcb_group_id: z99.string().optional(),
+  subcircuit_id: z99.string().optional(),
+  name: z99.string().optional(),
+  text: z99.string().optional(),
   center: point,
   width: length,
   height: length,
   stroke_width: length.default("0.1mm"),
-  is_filled: z95.boolean().optional(),
-  has_stroke: z95.boolean().optional(),
-  is_stroke_dashed: z95.boolean().optional(),
-  color: z95.string().optional()
+  corner_radius: length.optional(),
+  is_filled: z99.boolean().optional(),
+  has_stroke: z99.boolean().optional(),
+  is_stroke_dashed: z99.boolean().optional(),
+  color: z99.string().optional()
 }).describe("Defines a rectangular documentation note on the PCB");
 expectTypesMatch(true);
-var pcb_note_path = z96.object({
-  type: z96.literal("pcb_note_path"),
+var pcb_note_path = z100.object({
+  type: z100.literal("pcb_note_path"),
   pcb_note_path_id: getZodPrefixedIdWithDefault("pcb_note_path"),
-  pcb_component_id: z96.string().optional(),
-  pcb_group_id: z96.string().optional(),
-  subcircuit_id: z96.string().optional(),
-  route: z96.array(point),
+  pcb_component_id: z100.string().optional(),
+  pcb_group_id: z100.string().optional(),
+  subcircuit_id: z100.string().optional(),
+  name: z100.string().optional(),
+  text: z100.string().optional(),
+  route: z100.array(point),
   stroke_width: length.default("0.1mm"),
-  color: z96.string().optional()
+  color: z100.string().optional()
 }).describe("Defines a polyline documentation note on the PCB");
 expectTypesMatch(true);
-var pcb_note_line = z97.object({
-  type: z97.literal("pcb_note_line"),
+var pcb_note_line = z101.object({
+  type: z101.literal("pcb_note_line"),
   pcb_note_line_id: getZodPrefixedIdWithDefault("pcb_note_line"),
-  pcb_component_id: z97.string().optional(),
-  pcb_group_id: z97.string().optional(),
-  subcircuit_id: z97.string().optional(),
+  pcb_component_id: z101.string().optional(),
+  pcb_group_id: z101.string().optional(),
+  subcircuit_id: z101.string().optional(),
+  name: z101.string().optional(),
+  text: z101.string().optional(),
   x1: distance,
   y1: distance,
   x2: distance,
   y2: distance,
   stroke_width: distance.default("0.1mm"),
-  color: z97.string().optional(),
-  is_dashed: z97.boolean().optional()
+  color: z101.string().optional(),
+  is_dashed: z101.boolean().optional()
 }).describe("Defines a straight documentation note line on the PCB");
 expectTypesMatch(true);
-var pcb_note_dimension = z98.object({
-  type: z98.literal("pcb_note_dimension"),
+var pcb_note_dimension = z102.object({
+  type: z102.literal("pcb_note_dimension"),
   pcb_note_dimension_id: getZodPrefixedIdWithDefault("pcb_note_dimension"),
-  pcb_component_id: z98.string().optional(),
-  pcb_group_id: z98.string().optional(),
-  subcircuit_id: z98.string().optional(),
+  pcb_component_id: z102.string().optional(),
+  pcb_group_id: z102.string().optional(),
+  subcircuit_id: z102.string().optional(),
+  name: z102.string().optional(),
   from: point,
   to: point,
-  text: z98.string().optional(),
-  font: z98.literal("tscircuit2024").default("tscircuit2024"),
+  text: z102.string().optional(),
+  text_ccw_rotation: z102.number().optional(),
+  offset_distance: length.optional(),
+  offset_direction: z102.object({
+    x: z102.number(),
+    y: z102.number()
+  }).optional(),
+  font: z102.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
-  color: z98.string().optional(),
+  color: z102.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB documentation notes");
 expectTypesMatch(true);
-var pcb_footprint_overlap_error = z99.object({
-  type: z99.literal("pcb_footprint_overlap_error"),
+var pcb_footprint_overlap_error = z103.object({
+  type: z103.literal("pcb_footprint_overlap_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z99.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
-  message: z99.string(),
-  pcb_smtpad_ids: z99.array(z99.string()).optional(),
-  pcb_plated_hole_ids: z99.array(z99.string()).optional(),
-  pcb_hole_ids: z99.array(z99.string()).optional(),
-  pcb_keepout_ids: z99.array(z99.string()).optional()
+  error_type: z103.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
+  message: z103.string(),
+  pcb_smtpad_ids: z103.array(z103.string()).optional(),
+  pcb_plated_hole_ids: z103.array(z103.string()).optional(),
+  pcb_hole_ids: z103.array(z103.string()).optional(),
+  pcb_keepout_ids: z103.array(z103.string()).optional()
 }).describe("Error emitted when a pcb footprint overlaps with another element");
 expectTypesMatch(
   true
 );
-var pcb_keepout = z100.object({
-  type: z100.literal("pcb_keepout"),
-  shape: z100.literal("rect"),
-  pcb_group_id: z100.string().optional(),
-  subcircuit_id: z100.string().optional(),
+var pcb_keepout = z104.object({
+  type: z104.literal("pcb_keepout"),
+  shape: z104.literal("rect"),
+  pcb_group_id: z104.string().optional(),
+  subcircuit_id: z104.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  pcb_keepout_id: z100.string(),
-  layers: z100.array(z100.string()),
+  pcb_keepout_id: z104.string(),
+  layers: z104.array(z104.string()),
   // Specify layers where the keepout applies
-  description: z100.string().optional()
+  description: z104.string().optional()
   // Optional description of the keepout
 }).or(
-  z100.object({
-    type: z100.literal("pcb_keepout"),
-    shape: z100.literal("circle"),
-    pcb_group_id: z100.string().optional(),
-    subcircuit_id: z100.string().optional(),
+  z104.object({
+    type: z104.literal("pcb_keepout"),
+    shape: z104.literal("circle"),
+    pcb_group_id: z104.string().optional(),
+    subcircuit_id: z104.string().optional(),
     center: point,
     radius: distance,
-    pcb_keepout_id: z100.string(),
-    layers: z100.array(z100.string()),
+    pcb_keepout_id: z104.string(),
+    layers: z104.array(z104.string()),
     // Specify layers where the keepout applies
-    description: z100.string().optional()
+    description: z104.string().optional()
     // Optional description of the keepout
   })
 );
 expectTypesMatch(true);
-var pcb_cutout_base = z101.object({
-  type: z101.literal("pcb_cutout"),
+var pcb_cutout_base = z105.object({
+  type: z105.literal("pcb_cutout"),
   pcb_cutout_id: getZodPrefixedIdWithDefault("pcb_cutout"),
-  pcb_group_id: z101.string().optional(),
-  subcircuit_id: z101.string().optional()
+  pcb_group_id: z105.string().optional(),
+  subcircuit_id: z105.string().optional()
 });
 var pcb_cutout_rect = pcb_cutout_base.extend({
-  shape: z101.literal("rect"),
+  shape: z105.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -16774,164 +16868,168 @@ var pcb_cutout_rect = pcb_cutout_base.extend({
 });
 expectTypesMatch(true);
 var pcb_cutout_circle = pcb_cutout_base.extend({
-  shape: z101.literal("circle"),
+  shape: z105.literal("circle"),
   center: point,
   radius: length
 });
 expectTypesMatch(true);
 var pcb_cutout_polygon = pcb_cutout_base.extend({
-  shape: z101.literal("polygon"),
-  points: z101.array(point)
+  shape: z105.literal("polygon"),
+  points: z105.array(point)
 });
 expectTypesMatch(true);
-var pcb_cutout = z101.discriminatedUnion("shape", [
+var pcb_cutout = z105.discriminatedUnion("shape", [
   pcb_cutout_rect,
   pcb_cutout_circle,
   pcb_cutout_polygon
 ]).describe("Defines a cutout on the PCB, removing board material.");
 expectTypesMatch(true);
-var pcb_missing_footprint_error = z102.object({
-  type: z102.literal("pcb_missing_footprint_error"),
+var pcb_missing_footprint_error = z106.object({
+  type: z106.literal("pcb_missing_footprint_error"),
   pcb_missing_footprint_error_id: getZodPrefixedIdWithDefault(
     "pcb_missing_footprint_error"
   ),
-  pcb_group_id: z102.string().optional(),
-  subcircuit_id: z102.string().optional(),
-  error_type: z102.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
-  source_component_id: z102.string(),
-  message: z102.string()
+  pcb_group_id: z106.string().optional(),
+  subcircuit_id: z106.string().optional(),
+  error_type: z106.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
+  source_component_id: z106.string(),
+  message: z106.string()
 }).describe("Defines a missing footprint error on the PCB");
 expectTypesMatch(
   true
 );
-var external_footprint_load_error = z103.object({
-  type: z103.literal("external_footprint_load_error"),
+var external_footprint_load_error = z107.object({
+  type: z107.literal("external_footprint_load_error"),
   external_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "external_footprint_load_error"
   ),
-  pcb_component_id: z103.string(),
-  source_component_id: z103.string(),
-  pcb_group_id: z103.string().optional(),
-  subcircuit_id: z103.string().optional(),
-  footprinter_string: z103.string().optional(),
-  error_type: z103.literal("external_footprint_load_error").default("external_footprint_load_error"),
-  message: z103.string()
+  pcb_component_id: z107.string(),
+  source_component_id: z107.string(),
+  pcb_group_id: z107.string().optional(),
+  subcircuit_id: z107.string().optional(),
+  footprinter_string: z107.string().optional(),
+  error_type: z107.literal("external_footprint_load_error").default("external_footprint_load_error"),
+  message: z107.string()
 }).describe("Defines an error when an external footprint fails to load");
 expectTypesMatch(true);
-var circuit_json_footprint_load_error = z104.object({
-  type: z104.literal("circuit_json_footprint_load_error"),
+var circuit_json_footprint_load_error = z108.object({
+  type: z108.literal("circuit_json_footprint_load_error"),
   circuit_json_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "circuit_json_footprint_load_error"
   ),
-  pcb_component_id: z104.string(),
-  source_component_id: z104.string(),
-  pcb_group_id: z104.string().optional(),
-  subcircuit_id: z104.string().optional(),
-  error_type: z104.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
-  message: z104.string(),
-  circuit_json: z104.array(z104.any()).optional()
+  pcb_component_id: z108.string(),
+  source_component_id: z108.string(),
+  pcb_group_id: z108.string().optional(),
+  subcircuit_id: z108.string().optional(),
+  error_type: z108.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
+  message: z108.string(),
+  circuit_json: z108.array(z108.any()).optional()
 }).describe("Defines an error when a circuit JSON footprint fails to load");
 expectTypesMatch(true);
-var pcb_group = z105.object({
-  type: z105.literal("pcb_group"),
+var pcb_group = z109.object({
+  type: z109.literal("pcb_group"),
   pcb_group_id: getZodPrefixedIdWithDefault("pcb_group"),
-  source_group_id: z105.string(),
-  is_subcircuit: z105.boolean().optional(),
-  subcircuit_id: z105.string().optional(),
-  width: length,
-  height: length,
+  source_group_id: z109.string(),
+  is_subcircuit: z109.boolean().optional(),
+  subcircuit_id: z109.string().optional(),
+  width: length.optional(),
+  height: length.optional(),
   center: point,
-  pcb_component_ids: z105.array(z105.string()),
-  name: z105.string().optional(),
-  description: z105.string().optional(),
-  layout_mode: z105.string().optional(),
-  autorouter_configuration: z105.object({
+  outline: z109.array(point).optional(),
+  anchor_position: point.optional(),
+  anchor_alignment: z109.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).optional(),
+  pcb_component_ids: z109.array(z109.string()),
+  name: z109.string().optional(),
+  description: z109.string().optional(),
+  layout_mode: z109.string().optional(),
+  autorouter_configuration: z109.object({
     trace_clearance: length
   }).optional(),
-  autorouter_used_string: z105.string().optional()
+  autorouter_used_string: z109.string().optional()
 }).describe("Defines a group of components on the PCB");
 expectTypesMatch(true);
-var pcb_autorouting_error = z106.object({
-  type: z106.literal("pcb_autorouting_error"),
+var pcb_autorouting_error = z110.object({
+  type: z110.literal("pcb_autorouting_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_autorouting_error"),
-  error_type: z106.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
-  message: z106.string(),
-  subcircuit_id: z106.string().optional()
+  error_type: z110.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
+  message: z110.string(),
+  subcircuit_id: z110.string().optional()
 }).describe("The autorouting has failed to route a portion of the board");
 expectTypesMatch(true);
-var pcb_manual_edit_conflict_warning = z107.object({
-  type: z107.literal("pcb_manual_edit_conflict_warning"),
+var pcb_manual_edit_conflict_warning = z111.object({
+  type: z111.literal("pcb_manual_edit_conflict_warning"),
   pcb_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "pcb_manual_edit_conflict_warning"
   ),
-  warning_type: z107.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
-  message: z107.string(),
-  pcb_component_id: z107.string(),
-  pcb_group_id: z107.string().optional(),
-  subcircuit_id: z107.string().optional(),
-  source_component_id: z107.string()
+  warning_type: z111.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
+  message: z111.string(),
+  pcb_component_id: z111.string(),
+  pcb_group_id: z111.string().optional(),
+  subcircuit_id: z111.string().optional(),
+  source_component_id: z111.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit pcbX/pcbY coordinates"
 );
 expectTypesMatch(true);
-var pcb_breakout_point = z108.object({
-  type: z108.literal("pcb_breakout_point"),
+var pcb_breakout_point = z112.object({
+  type: z112.literal("pcb_breakout_point"),
   pcb_breakout_point_id: getZodPrefixedIdWithDefault("pcb_breakout_point"),
-  pcb_group_id: z108.string(),
-  subcircuit_id: z108.string().optional(),
-  source_trace_id: z108.string().optional(),
-  source_port_id: z108.string().optional(),
-  source_net_id: z108.string().optional(),
+  pcb_group_id: z112.string(),
+  subcircuit_id: z112.string().optional(),
+  source_trace_id: z112.string().optional(),
+  source_port_id: z112.string().optional(),
+  source_net_id: z112.string().optional(),
   x: distance,
   y: distance
 }).describe(
   "Defines a routing target within a pcb_group for a source_trace or source_net"
 );
 expectTypesMatch(true);
-var pcb_ground_plane = z109.object({
-  type: z109.literal("pcb_ground_plane"),
+var pcb_ground_plane = z113.object({
+  type: z113.literal("pcb_ground_plane"),
   pcb_ground_plane_id: getZodPrefixedIdWithDefault("pcb_ground_plane"),
-  source_pcb_ground_plane_id: z109.string(),
-  source_net_id: z109.string(),
-  pcb_group_id: z109.string().optional(),
-  subcircuit_id: z109.string().optional()
+  source_pcb_ground_plane_id: z113.string(),
+  source_net_id: z113.string(),
+  pcb_group_id: z113.string().optional(),
+  subcircuit_id: z113.string().optional()
 }).describe("Defines a ground plane on the PCB");
 expectTypesMatch(true);
-var pcb_ground_plane_region = z110.object({
-  type: z110.literal("pcb_ground_plane_region"),
+var pcb_ground_plane_region = z114.object({
+  type: z114.literal("pcb_ground_plane_region"),
   pcb_ground_plane_region_id: getZodPrefixedIdWithDefault(
     "pcb_ground_plane_region"
   ),
-  pcb_ground_plane_id: z110.string(),
-  pcb_group_id: z110.string().optional(),
-  subcircuit_id: z110.string().optional(),
+  pcb_ground_plane_id: z114.string(),
+  pcb_group_id: z114.string().optional(),
+  subcircuit_id: z114.string().optional(),
   layer: layer_ref,
-  points: z110.array(point)
+  points: z114.array(point)
 }).describe("Defines a polygon region of a ground plane");
 expectTypesMatch(true);
-var pcb_thermal_spoke = z111.object({
-  type: z111.literal("pcb_thermal_spoke"),
+var pcb_thermal_spoke = z115.object({
+  type: z115.literal("pcb_thermal_spoke"),
   pcb_thermal_spoke_id: getZodPrefixedIdWithDefault("pcb_thermal_spoke"),
-  pcb_ground_plane_id: z111.string(),
-  shape: z111.string(),
-  spoke_count: z111.number(),
+  pcb_ground_plane_id: z115.string(),
+  shape: z115.string(),
+  spoke_count: z115.number(),
   spoke_thickness: distance,
   spoke_inner_diameter: distance,
   spoke_outer_diameter: distance,
-  pcb_plated_hole_id: z111.string().optional(),
-  subcircuit_id: z111.string().optional()
+  pcb_plated_hole_id: z115.string().optional(),
+  subcircuit_id: z115.string().optional()
 }).describe("Pattern for connecting a ground plane to a plated hole");
 expectTypesMatch(true);
-var pcb_copper_pour_base = z112.object({
-  type: z112.literal("pcb_copper_pour"),
+var pcb_copper_pour_base = z116.object({
+  type: z116.literal("pcb_copper_pour"),
   pcb_copper_pour_id: getZodPrefixedIdWithDefault("pcb_copper_pour"),
-  pcb_group_id: z112.string().optional(),
-  subcircuit_id: z112.string().optional(),
+  pcb_group_id: z116.string().optional(),
+  subcircuit_id: z116.string().optional(),
   layer: layer_ref,
-  source_net_id: z112.string().optional()
+  source_net_id: z116.string().optional(),
+  covered_with_solder_mask: z116.boolean().optional().default(true)
 });
 var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
-  shape: z112.literal("rect"),
+  shape: z116.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -16939,116 +17037,140 @@ var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
 });
 expectTypesMatch(true);
 var pcb_copper_pour_brep = pcb_copper_pour_base.extend({
-  shape: z112.literal("brep"),
+  shape: z116.literal("brep"),
   brep_shape
 });
 expectTypesMatch(true);
 var pcb_copper_pour_polygon = pcb_copper_pour_base.extend({
-  shape: z112.literal("polygon"),
-  points: z112.array(point)
+  shape: z116.literal("polygon"),
+  points: z116.array(point)
 });
 expectTypesMatch(true);
-var pcb_copper_pour = z112.discriminatedUnion("shape", [
+var pcb_copper_pour = z116.discriminatedUnion("shape", [
   pcb_copper_pour_rect,
   pcb_copper_pour_brep,
   pcb_copper_pour_polygon
 ]).describe("Defines a copper pour on the PCB.");
 expectTypesMatch(true);
-var pcb_component_outside_board_error = z113.object({
-  type: z113.literal("pcb_component_outside_board_error"),
+var pcb_component_outside_board_error = z117.object({
+  type: z117.literal("pcb_component_outside_board_error"),
   pcb_component_outside_board_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_outside_board_error"
   ),
-  error_type: z113.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
-  message: z113.string(),
-  pcb_component_id: z113.string(),
-  pcb_board_id: z113.string(),
+  error_type: z117.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
+  message: z117.string(),
+  pcb_component_id: z117.string(),
+  pcb_board_id: z117.string(),
   component_center: point,
-  component_bounds: z113.object({
-    min_x: z113.number(),
-    max_x: z113.number(),
-    min_y: z113.number(),
-    max_y: z113.number()
+  component_bounds: z117.object({
+    min_x: z117.number(),
+    max_x: z117.number(),
+    min_y: z117.number(),
+    max_y: z117.number()
   }),
-  subcircuit_id: z113.string().optional(),
-  source_component_id: z113.string().optional()
+  subcircuit_id: z117.string().optional(),
+  source_component_id: z117.string().optional()
 }).describe(
   "Error emitted when a PCB component is placed outside the board boundaries"
 );
 expectTypesMatch(true);
-var pcb_via_clearance_error = z114.object({
-  type: z114.literal("pcb_via_clearance_error"),
+var pcb_component_invalid_layer_error = z118.object({
+  type: z118.literal("pcb_component_invalid_layer_error"),
+  pcb_component_invalid_layer_error_id: getZodPrefixedIdWithDefault(
+    "pcb_component_invalid_layer_error"
+  ),
+  error_type: z118.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
+  message: z118.string(),
+  pcb_component_id: z118.string().optional(),
+  source_component_id: z118.string(),
+  layer: layer_ref,
+  subcircuit_id: z118.string().optional()
+}).describe(
+  "Error emitted when a component is placed on an invalid layer (components can only be on 'top' or 'bottom' layers)"
+);
+expectTypesMatch(true);
+var pcb_via_clearance_error = z119.object({
+  type: z119.literal("pcb_via_clearance_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z114.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
-  message: z114.string(),
-  pcb_via_ids: z114.array(z114.string()).min(2),
+  error_type: z119.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
+  message: z119.string(),
+  pcb_via_ids: z119.array(z119.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  pcb_center: z114.object({
-    x: z114.number().optional(),
-    y: z114.number().optional()
+  pcb_center: z119.object({
+    x: z119.number().optional(),
+    y: z119.number().optional()
   }).optional(),
-  subcircuit_id: z114.string().optional()
+  subcircuit_id: z119.string().optional()
 }).describe("Error emitted when vias are closer than the allowed clearance");
 expectTypesMatch(true);
-var pcb_courtyard_rect = z115.object({
-  type: z115.literal("pcb_courtyard_rect"),
+var pcb_courtyard_rect = z120.object({
+  type: z120.literal("pcb_courtyard_rect"),
   pcb_courtyard_rect_id: getZodPrefixedIdWithDefault("pcb_courtyard_rect"),
-  pcb_component_id: z115.string(),
-  pcb_group_id: z115.string().optional(),
-  subcircuit_id: z115.string().optional(),
+  pcb_component_id: z120.string(),
+  pcb_group_id: z120.string().optional(),
+  subcircuit_id: z120.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
-  stroke_width: length.default("0.1mm"),
-  is_filled: z115.boolean().optional(),
-  has_stroke: z115.boolean().optional(),
-  is_stroke_dashed: z115.boolean().optional(),
-  color: z115.string().optional()
+  color: z120.string().optional()
 }).describe("Defines a courtyard rectangle on the PCB");
 expectTypesMatch(true);
-var pcb_courtyard_outline = z116.object({
-  type: z116.literal("pcb_courtyard_outline"),
+var pcb_courtyard_outline = z121.object({
+  type: z121.literal("pcb_courtyard_outline"),
   pcb_courtyard_outline_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_outline"
   ),
-  pcb_component_id: z116.string(),
-  pcb_group_id: z116.string().optional(),
-  subcircuit_id: z116.string().optional(),
+  pcb_component_id: z121.string(),
+  pcb_group_id: z121.string().optional(),
+  subcircuit_id: z121.string().optional(),
   layer: visible_layer,
-  outline: z116.array(point).min(2),
+  outline: z121.array(point).min(2),
   stroke_width: length.default("0.1mm"),
-  is_closed: z116.boolean().optional(),
-  is_stroke_dashed: z116.boolean().optional(),
-  color: z116.string().optional()
+  is_closed: z121.boolean().optional(),
+  is_stroke_dashed: z121.boolean().optional(),
+  color: z121.string().optional()
 }).describe("Defines a courtyard outline on the PCB");
 expectTypesMatch(true);
-var cad_component = z117.object({
-  type: z117.literal("cad_component"),
-  cad_component_id: z117.string(),
-  pcb_component_id: z117.string(),
-  source_component_id: z117.string(),
+var pcb_courtyard_polygon = z122.object({
+  type: z122.literal("pcb_courtyard_polygon"),
+  pcb_courtyard_polygon_id: getZodPrefixedIdWithDefault(
+    "pcb_courtyard_polygon"
+  ),
+  pcb_component_id: z122.string(),
+  pcb_group_id: z122.string().optional(),
+  subcircuit_id: z122.string().optional(),
+  layer: visible_layer,
+  points: z122.array(point).min(3),
+  color: z122.string().optional()
+}).describe("Defines a courtyard polygon on the PCB");
+expectTypesMatch(true);
+var cad_component = z123.object({
+  type: z123.literal("cad_component"),
+  cad_component_id: z123.string(),
+  pcb_component_id: z123.string(),
+  source_component_id: z123.string(),
   position: point3,
   rotation: point3.optional(),
   size: point3.optional(),
   layer: layer_ref.optional(),
-  subcircuit_id: z117.string().optional(),
+  subcircuit_id: z123.string().optional(),
   // These are all ways to generate/load the 3d model
-  footprinter_string: z117.string().optional(),
-  model_obj_url: z117.string().optional(),
-  model_stl_url: z117.string().optional(),
-  model_3mf_url: z117.string().optional(),
-  model_gltf_url: z117.string().optional(),
-  model_glb_url: z117.string().optional(),
-  model_step_url: z117.string().optional(),
-  model_wrl_url: z117.string().optional(),
-  model_unit_to_mm_scale_factor: z117.number().optional(),
-  model_jscad: z117.any().optional()
+  footprinter_string: z123.string().optional(),
+  model_obj_url: z123.string().optional(),
+  model_stl_url: z123.string().optional(),
+  model_3mf_url: z123.string().optional(),
+  model_gltf_url: z123.string().optional(),
+  model_glb_url: z123.string().optional(),
+  model_step_url: z123.string().optional(),
+  model_wrl_url: z123.string().optional(),
+  model_unit_to_mm_scale_factor: z123.number().optional(),
+  model_jscad: z123.any().optional()
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
-var wave_shape = z118.enum(["sinewave", "square", "triangle", "sawtooth"]);
-var percentage = z118.union([z118.string(), z118.number()]).transform((val) => {
+var wave_shape = z124.enum(["sinewave", "square", "triangle", "sawtooth"]);
+var percentage = z124.union([z124.string(), z124.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -17057,30 +17179,30 @@ var percentage = z118.union([z118.string(), z118.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z118.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z124.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_voltage_source = z118.object({
-  type: z118.literal("simulation_voltage_source"),
+var simulation_dc_voltage_source = z124.object({
+  type: z124.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z118.literal(true).optional().default(true),
-  positive_source_port_id: z118.string().optional(),
-  negative_source_port_id: z118.string().optional(),
-  positive_source_net_id: z118.string().optional(),
-  negative_source_net_id: z118.string().optional(),
+  is_dc_source: z124.literal(true).optional().default(true),
+  positive_source_port_id: z124.string().optional(),
+  negative_source_port_id: z124.string().optional(),
+  positive_source_net_id: z124.string().optional(),
+  negative_source_net_id: z124.string().optional(),
   voltage
 }).describe("Defines a DC voltage source for simulation");
-var simulation_ac_voltage_source = z118.object({
-  type: z118.literal("simulation_voltage_source"),
+var simulation_ac_voltage_source = z124.object({
+  type: z124.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z118.literal(false),
-  terminal1_source_port_id: z118.string().optional(),
-  terminal2_source_port_id: z118.string().optional(),
-  terminal1_source_net_id: z118.string().optional(),
-  terminal2_source_net_id: z118.string().optional(),
+  is_dc_source: z124.literal(false),
+  terminal1_source_port_id: z124.string().optional(),
+  terminal2_source_port_id: z124.string().optional(),
+  terminal1_source_net_id: z124.string().optional(),
+  terminal2_source_net_id: z124.string().optional(),
   voltage: voltage.optional(),
   frequency: frequency.optional(),
   peak_to_peak_voltage: voltage.optional(),
@@ -17088,62 +17210,64 @@ var simulation_ac_voltage_source = z118.object({
   phase: rotation.optional(),
   duty_cycle: percentage.optional()
 }).describe("Defines an AC voltage source for simulation");
-var simulation_voltage_source = z118.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
+var simulation_voltage_source = z124.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
-var experiment_type = z119.union([
-  z119.literal("spice_dc_sweep"),
-  z119.literal("spice_dc_operating_point"),
-  z119.literal("spice_transient_analysis"),
-  z119.literal("spice_ac_analysis")
+var experiment_type = z125.union([
+  z125.literal("spice_dc_sweep"),
+  z125.literal("spice_dc_operating_point"),
+  z125.literal("spice_transient_analysis"),
+  z125.literal("spice_ac_analysis")
 ]);
-var simulation_experiment = z119.object({
-  type: z119.literal("simulation_experiment"),
+var simulation_experiment = z125.object({
+  type: z125.literal("simulation_experiment"),
   simulation_experiment_id: getZodPrefixedIdWithDefault(
     "simulation_experiment"
   ),
-  name: z119.string(),
+  name: z125.string(),
   experiment_type,
   time_per_step: duration_ms.optional(),
   start_time_ms: ms.optional(),
   end_time_ms: ms.optional()
 }).describe("Defines a simulation experiment configuration");
 expectTypesMatch(true);
-var simulation_transient_voltage_graph = z120.object({
-  type: z120.literal("simulation_transient_voltage_graph"),
+var simulation_transient_voltage_graph = z126.object({
+  type: z126.literal("simulation_transient_voltage_graph"),
   simulation_transient_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_voltage_graph"
   ),
-  simulation_experiment_id: z120.string(),
-  timestamps_ms: z120.array(z120.number()).optional(),
-  voltage_levels: z120.array(z120.number()),
-  schematic_voltage_probe_id: z120.string().optional(),
-  subcircuit_connectivity_map_key: z120.string().optional(),
+  simulation_experiment_id: z126.string(),
+  timestamps_ms: z126.array(z126.number()).optional(),
+  voltage_levels: z126.array(z126.number()),
+  schematic_voltage_probe_id: z126.string().optional(),
+  simulation_voltage_probe_id: z126.string().optional(),
+  subcircuit_connectivity_map_key: z126.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z120.string().optional()
+  name: z126.string().optional()
 }).describe("Stores voltage measurements over time for a simulation");
 expectTypesMatch(true);
-var simulation_switch = z121.object({
-  type: z121.literal("simulation_switch"),
+var simulation_switch = z127.object({
+  type: z127.literal("simulation_switch"),
   simulation_switch_id: getZodPrefixedIdWithDefault("simulation_switch"),
+  source_component_id: z127.string().optional(),
   closes_at: ms.optional(),
   opens_at: ms.optional(),
-  starts_closed: z121.boolean().optional(),
+  starts_closed: z127.boolean().optional(),
   switching_frequency: frequency.optional()
 }).describe("Defines a switch for simulation timing control");
 expectTypesMatch(true);
-var simulation_voltage_probe = z122.object({
-  type: z122.literal("simulation_voltage_probe"),
+var simulation_voltage_probe = z128.object({
+  type: z128.literal("simulation_voltage_probe"),
   simulation_voltage_probe_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_probe"
   ),
-  source_port_id: z122.string().optional(),
-  source_net_id: z122.string().optional(),
-  name: z122.string().optional(),
-  subcircuit_id: z122.string().optional()
+  source_port_id: z128.string().optional(),
+  source_net_id: z128.string().optional(),
+  name: z128.string().optional(),
+  subcircuit_id: z128.string().optional()
 }).describe(
   "Defines a voltage probe for simulation, connected to a port or a net"
 ).refine(
@@ -17153,7 +17277,18 @@ var simulation_voltage_probe = z122.object({
   }
 );
 expectTypesMatch(true);
-var any_circuit_element = z123.union([
+var simulation_unknown_experiment_error = z129.object({
+  type: z129.literal("simulation_unknown_experiment_error"),
+  simulation_unknown_experiment_error_id: getZodPrefixedIdWithDefault(
+    "simulation_unknown_experiment_error"
+  ),
+  error_type: z129.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
+  message: z129.string(),
+  simulation_experiment_id: z129.string().optional(),
+  subcircuit_id: z129.string().optional()
+}).describe("An unknown error occurred during the simulation experiment.");
+expectTypesMatch(true);
+var any_circuit_element = z130.union([
   source_trace,
   source_port,
   any_source_component,
@@ -17182,6 +17317,7 @@ var any_circuit_element = z123.union([
   source_project_metadata,
   source_trace_not_connected_error,
   source_pin_missing_trace_warning,
+  unknown_error_finding_part,
   pcb_component,
   pcb_hole,
   pcb_missing_footprint_error,
@@ -17198,11 +17334,13 @@ var any_circuit_element = z123.union([
   pcb_smtpad,
   pcb_solder_paste,
   pcb_board,
+  pcb_panel,
   pcb_group,
   pcb_trace_hint,
   pcb_silkscreen_line,
   pcb_silkscreen_path,
   pcb_silkscreen_text,
+  pcb_copper_text,
   pcb_silkscreen_rect,
   pcb_silkscreen_circle,
   pcb_silkscreen_oval,
@@ -17230,8 +17368,10 @@ var any_circuit_element = z123.union([
   pcb_thermal_spoke,
   pcb_copper_pour,
   pcb_component_outside_board_error,
+  pcb_component_invalid_layer_error,
   pcb_courtyard_rect,
   pcb_courtyard_outline,
+  pcb_courtyard_polygon,
   schematic_box,
   schematic_text,
   schematic_line,
@@ -17249,6 +17389,7 @@ var any_circuit_element = z123.union([
   schematic_voltage_probe,
   schematic_manual_edit_conflict_warning,
   schematic_group,
+  schematic_sheet,
   schematic_table,
   schematic_table_cell,
   cad_component,
@@ -17256,7 +17397,8 @@ var any_circuit_element = z123.union([
   simulation_experiment,
   simulation_transient_voltage_graph,
   simulation_switch,
-  simulation_voltage_probe
+  simulation_voltage_probe,
+  simulation_unknown_experiment_error
 ]);
 expectTypesMatch(true);
 expectStringUnionsMatch(true);
@@ -17271,7 +17413,7 @@ import { z as z710 } from "zod";
 import { z as z910 } from "zod";
 import "zod";
 import "zod";
-import { z as z125 } from "zod";
+import { z as z1210 } from "zod";
 import { z as z132 } from "zod";
 import { z as z142 } from "zod";
 import { z as z152 } from "zod";
@@ -17447,12 +17589,12 @@ function convertMilToMm(value) {
   }
   return Number(value);
 }
-var lengthInMm = z124.union([z124.string(), z124.number()]).transform((val) => convertMilToMm(val));
-var extendDipDef = (newDefaults) => z124.object({
-  fn: z124.string(),
-  num_pins: z124.number().optional().default(6),
-  wide: z124.boolean().optional(),
-  narrow: z124.boolean().optional(),
+var lengthInMm = z131.union([z131.string(), z131.number()]).transform((val) => convertMilToMm(val));
+var extendDipDef = (newDefaults) => z131.object({
+  fn: z131.string(),
+  num_pins: z131.number().optional().default(6),
+  wide: z131.boolean().optional(),
+  narrow: z131.boolean().optional(),
   w: lengthInMm.optional(),
   p: lengthInMm.default(newDefaults.p ?? "2.54mm"),
   id: lengthInMm.optional(),
@@ -18889,24 +19031,24 @@ function determinePinlabelAnchorSide({
   }
   return pinlabelAnchorSide;
 }
-var pinrow_def = z125.object({
-  fn: z125.string(),
-  num_pins: z125.number().optional().default(6),
-  rows: z125.union([z125.string(), z125.number()]).transform((val) => Number(val)).optional().default(1).describe("number of rows"),
+var pinrow_def = z1210.object({
+  fn: z1210.string(),
+  num_pins: z1210.number().optional().default(6),
+  rows: z1210.union([z1210.string(), z1210.number()]).transform((val) => Number(val)).optional().default(1).describe("number of rows"),
   p: length.default("0.1in").describe("pitch"),
   id: length.default("1.0mm").describe("inner diameter"),
   od: length.default("1.5mm").describe("outer diameter"),
-  male: z125.boolean().optional().describe("for male pin headers"),
-  female: z125.boolean().optional().describe("for female pin headers"),
-  pinlabeltextalignleft: z125.boolean().optional().default(false),
-  pinlabeltextaligncenter: z125.boolean().optional().default(false),
-  pinlabeltextalignright: z125.boolean().optional().default(false),
-  pinlabelverticallyinverted: z125.boolean().optional().default(false),
-  pinlabelorthogonal: z125.boolean().optional().default(false),
-  nosquareplating: z125.boolean().optional().default(false).describe("do not use rectangular pad for pin 1"),
-  nopinlabels: z125.boolean().optional().default(false).describe("omit silkscreen pin labels"),
-  doublesidedpinlabel: z125.boolean().optional().default(false).describe("add silkscreen pins in top and bottom layers"),
-  bottomsidepinlabel: z125.boolean().optional().default(false).describe(
+  male: z1210.boolean().optional().describe("for male pin headers"),
+  female: z1210.boolean().optional().describe("for female pin headers"),
+  pinlabeltextalignleft: z1210.boolean().optional().default(false),
+  pinlabeltextaligncenter: z1210.boolean().optional().default(false),
+  pinlabeltextalignright: z1210.boolean().optional().default(false),
+  pinlabelverticallyinverted: z1210.boolean().optional().default(false),
+  pinlabelorthogonal: z1210.boolean().optional().default(false),
+  nosquareplating: z1210.boolean().optional().default(false).describe("do not use rectangular pad for pin 1"),
+  nopinlabels: z1210.boolean().optional().default(false).describe("omit silkscreen pin labels"),
+  doublesidedpinlabel: z1210.boolean().optional().default(false).describe("add silkscreen pins in top and bottom layers"),
+  bottomsidepinlabel: z1210.boolean().optional().default(false).describe(
     "place the silkscreen reference text on the bottom layer instead of top"
   )
 }).transform((data) => {
@@ -18920,7 +19062,7 @@ var pinrow_def = z125.object({
 }).superRefine((data, ctx) => {
   if (data.male && data.female) {
     ctx.addIssue({
-      code: z125.ZodIssueCode.custom,
+      code: z1210.ZodIssueCode.custom,
       message: "'male' and 'female' cannot both be true; it should be male or female.",
       path: ["male", "female"]
     });
@@ -24552,17 +24694,17 @@ var svgPathPoints = normalizeOnY([
 ]);
 var DIP_PIN_HEIGHT = 5.47;
 var heightAboveSurface = 0.5;
-var DipPinLeg = ({ x, y, z: z126 }) => {
+var DipPinLeg = ({ x, y, z: z133 }) => {
   const isRotated = x > 0;
   return /* @__PURE__ */ jsxs(Fragment22, { children: [
-    /* @__PURE__ */ jsx5(Translate, { offset: { x: x + 0.25 / 2, y, z: z126 }, children: /* @__PURE__ */ jsx5(Rotate, { rotation: ["-90deg", 0, "90deg"], children: /* @__PURE__ */ jsx5(ExtrudeLinear, { height: 0.25, children: /* @__PURE__ */ jsx5(Polygon, { points: svgPathPoints.map((p) => [p.x, p.y]) }) }) }) }),
+    /* @__PURE__ */ jsx5(Translate, { offset: { x: x + 0.25 / 2, y, z: z133 }, children: /* @__PURE__ */ jsx5(Rotate, { rotation: ["-90deg", 0, "90deg"], children: /* @__PURE__ */ jsx5(ExtrudeLinear, { height: 0.25, children: /* @__PURE__ */ jsx5(Polygon, { points: svgPathPoints.map((p) => [p.x, p.y]) }) }) }) }),
     /* @__PURE__ */ jsx5(
       Translate,
       {
         offset: {
           x,
           y: y + (isRotated ? 1 : -1),
-          z: z126
+          z: z133
         },
         children: /* @__PURE__ */ jsx5(Rotate, { rotation: ["-90deg", "90deg", isRotated ? "180deg" : "0deg"], children: /* @__PURE__ */ jsx5(ExtrudeLinear, { height: 2, children: /* @__PURE__ */ jsx5(
           Polygon,
@@ -26647,7 +26789,7 @@ import * as THREE14 from "three";
 // package.json
 var package_default = {
   name: "@tscircuit/3d-viewer",
-  version: "0.0.423",
+  version: "0.0.424",
   main: "./dist/index.js",
   module: "./dist/index.js",
   type: "module",
@@ -26708,7 +26850,7 @@ var package_default = {
     "@vitejs/plugin-react": "^4.3.4",
     "bun-match-svg": "^0.0.9",
     "bun-types": "1.2.1",
-    "circuit-json": "0.0.279",
+    "circuit-json": "0.0.300",
     "circuit-to-svg": "^0.0.179",
     debug: "^4.4.0",
     "jscad-electronics": "^0.0.48",
@@ -27359,11 +27501,11 @@ var useCameraController = ({
 }) => {
   const controlsRef = useRef5(null);
   const baseDistance = useMemo14(() => {
-    const [x, y, z126] = initialCameraPosition ?? [5, 5, 5];
+    const [x, y, z133] = initialCameraPosition ?? [5, 5, 5];
     const distance2 = Math.hypot(
       x - defaultTarget.x,
       y - defaultTarget.y,
-      z126 - defaultTarget.z
+      z133 - defaultTarget.z
     );
     return distance2 > 0 ? distance2 : 5;
   }, [initialCameraPosition, defaultTarget]);
@@ -29080,7 +29222,9 @@ var BoardGeomBuilder = class {
       if (this.boardClipGeom) {
         pourGeom = (0, import_booleans4.intersect)(this.boardClipGeom, pourGeom);
       }
-      const coloredPourGeom = (0, import_colors6.colorize)(colors.copper, pourGeom);
+      const covered = pour.covered_with_solder_mask !== false;
+      const pourMaterialColor = covered ? tracesMaterialColors[this.board.material] ?? colors.fr4GreenSolderWithMask : colors.copper;
+      const coloredPourGeom = (0, import_colors6.colorize)(pourMaterialColor, pourGeom);
       this.copperPourGeoms.push(coloredPourGeom);
     }
   }
@@ -30907,7 +31051,6 @@ function createManifoldBoard(Manifold, CrossSection, boardData, pcbThickness, ma
 
 // src/utils/manifold/process-copper-pours.ts
 import * as THREE23 from "three";
-var COPPER_COLOR4 = new THREE23.Color(...colors.copper);
 var arePointsClockwise4 = (points) => {
   let area = 0;
   for (let i = 0; i < points.length; i++) {
@@ -30973,7 +31116,7 @@ function ringToPoints2(ring2, arcSegments) {
   }
   return allPoints;
 }
-function processCopperPoursForManifold(Manifold, CrossSection, circuitJson, pcbThickness, manifoldInstancesForCleanup, holeUnion, boardClipVolume) {
+function processCopperPoursForManifold(Manifold, CrossSection, circuitJson, pcbThickness, manifoldInstancesForCleanup, boardMaterial, holeUnion, boardClipVolume) {
   const copperPourGeoms = [];
   const copperPours = circuitJson.filter(
     (e) => e.type === "pcb_copper_pour"
@@ -31065,11 +31208,14 @@ function processCopperPoursForManifold(Manifold, CrossSection, circuitJson, pcbT
         manifoldInstancesForCleanup.push(clipped);
         pourOp = clipped;
       }
+      const covered = pour.covered_with_solder_mask !== false;
+      const pourColorArr = covered ? tracesMaterialColors[boardMaterial] ?? colors.fr4GreenSolderWithMask : colors.copper;
+      const pourColor = new THREE23.Color(...pourColorArr);
       const threeGeom = manifoldMeshToThreeGeometry(pourOp.getMesh());
       copperPourGeoms.push({
         key: `coppour-${pour.pcb_copper_pour_id}`,
         geometry: threeGeom,
-        color: COPPER_COLOR4
+        color: pourColor
       });
     }
   }
@@ -31364,6 +31510,7 @@ var useManifoldBoardBuilder = (manifoldJSModule, circuitJson) => {
         circuitJson,
         currentPcbThickness,
         manifoldInstancesForCleanup.current,
+        boardData.material,
         holeUnion,
         boardClipVolume
       );