@tracepass/dpp-schemas 1.10.1 → 1.10.3

package/README.md

@@ -83,10 +83,12 @@ rather than `required`, with the CELEX of the instrument expected to impose them
 **An obligation does not always apply uniformly across a category.** Where the governing
 instrument distinguishes sub-categories, the field carries `validation.requiredBy` — a map
 from sub-category to `required`, `conditional`, or `notApplicable`. Battery uses the
-Regulation (EU) 2023/1542 split (`EV`, `LMT`, `industrial_gt_2kwh`): everything applies to
-EV batteries, LMT is exempt from the capacity-threshold-for-exhaustion field, and industrial
-batteries are largely conditional on gates such as having a battery management system or
-containing Annex X materials. `conditional` means the instrument compels the field only when
+Regulation (EU) 2023/1542 split (`EV`, `LMT`, `industrial_gt_2kwh`). The capacity threshold
+for exhaustion (Annex XIII point 1(k)) and the state of certified energy are EV-only; the
+remaining-capacity, power, round-trip-efficiency, self-discharge, resistance and throughput
+parameters of Annex VII apply to LMT (and stationary storage) but not to EV. Industrial
+batteries are largely conditional on gates such as being rechargeable, having a battery
+management system, or containing Annex X materials. `conditional` means the instrument compels the field only when
 its stated gate is met — so a passport legitimately leaves it empty otherwise. Fields with no
 `requiredBy` apply to the whole category.
 
@@ -286,6 +288,18 @@ runs it on every push:
   validator, EPCIS 2.0 event mapper, and GS1 utilities that consume these specs.
   Apache-2.0, zero dependencies.
 
+Plain-language explainers of the law these specs encode:
+
+- [Article 77 battery passport — Regulation (EU) 2023/1542](https://www.tracepass.eu/regulatory/battery-articles/article-77)
+  — the article behind the `battery` template's required fields.
+- [EU Battery Regulation: the February 2027 compliance guide](https://www.tracepass.eu/resources/eu-battery-regulation-february-2027)
+  — who has to issue a battery passport, and from when.
+- [ESPR delegated acts, category by category](https://www.tracepass.eu/regulatory/delegated-acts)
+  — why most templates carry `anticipated` rather than `required` fields.
+- [Standards are not law](https://www.tracepass.eu/regulatory/standards-are-not-law)
+  — what makes a DPP field mandatory, and what does not.
+- [DPP glossary](https://www.tracepass.eu/glossary) — ESPR, PPWR, delegated act, economic operator, EPCIS.
+
 ## Provenance and limits
 
 These specs are hand-authored from the regulations and the relevant standards, and are

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@tracepass/dpp-schemas",
-  "version": "1.10.1",
+  "version": "1.10.3",
   "description": "Machine-readable field specifications for EU Digital Product Passports (ESPR) — 13 product categories, 987 fields, each traced to the article of EU law that mandates it. Pure JSON, no dependencies.",
   "keywords": [
     "digital-product-passport",

package/standards.json

@@ -1,5 +1,5 @@
 {
-  "_note": "Registry of the technical standards a template field or a DPP system may relate to. Keys are UNDATED designations; editions are listed per entry. A standard never makes a field required - only `regulationRef.kind: legislation` can. `ojCitation` is present only where an implementing decision published the reference in the Official Journal, which is what confers a presumption of conformity. `verified: true` means title and status were checked against the OJ or the standard's own text; `false` means `subject` is a descriptive label, not the official title. Every CEN/CENELEC member adopts an EN identically as a national standard (e.g. DIN EN, BDS EN) - those are aliases of the same text, recorded under `nationalAdoptions` where confirmed, not separate standards.",
+  "_note": "Registry of the technical standards a template field or a DPP system may relate to. Keys are UNDATED designations; editions are listed per entry. A standard never makes a field required - only `regulationRef.kind: legislation` can. `ojCitation` is present only where an implementing decision published the reference in the Official Journal, which is what confers a presumption of conformity. `verified: true` means the title and status were checked against the OJ, the publisher's own catalogue (CEN/CENELEC, ISO Open Data, BSI, GS1) or the standard's own text, and `notes` names the source; `false` means `subject` is a descriptive label, not the official title. Every CEN/CENELEC member adopts an EN identically as a national standard (e.g. DIN EN, BDS EN) - those are aliases of the same text, recorded under `nationalAdoptions` where confirmed, not separate standards.",
   "kinds": {
     "harmonised-standard": "An EN whose reference is published in the OJ under an EU act; conformity gives a presumption of conformity with the provisions named.",
     "european-standard": "A published EN (or EN ISO / EN IEC) not cited in the OJ for DPP purposes.",
@@ -28,128 +28,213 @@
     "BS 5852": {
       "kind": "national-standard",
       "family": "furniture",
-      "body": "BSI (GB)",
-      "subject": "Ignitability of upholstered seating (UK market)",
-      "verified": false
+      "body": "BSI FW/6",
+      "subject": "Test method for the ignitability of upholstered seating. The UK duty to meet it comes from UK furniture fire-safety law, not from the standard.",
+      "verified": true,
+      "title": "Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources",
+      "edition": "BS 5852:2006",
+      "status": "published",
+      "notes": "Title checked against the BSI Knowledge catalogue."
     },
     "EN 10025": {
       "kind": "european-standard",
       "family": "metals",
-      "body": "CEN/TC 459",
+      "body": "CEN/TC 459/SC 3",
       "subject": "Hot rolled products of structural steels",
-      "verified": false
+      "verified": true,
+      "title": "Hot rolled products of structural steels",
+      "editions": [
+        "EN 10025-1:2004",
+        "EN 10025-2:2019",
+        "EN 10025-3:2019",
+        "EN 10025-4:2019+A1:2022",
+        "EN 10025-5:2019",
+        "EN 10025-6:2019+A1:2022"
+      ],
+      "status": "published",
+      "notes": "Multi-part series: Part 1 general technical delivery conditions; Parts 2-6 by steel type. EN 10025-1:2004 is harmonised under Regulation (EU) No 305/2011. Revisions of Parts 2-6 are being drafted. Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 10027-1": {
       "kind": "european-standard",
       "family": "metals",
-      "body": "CEN/TC 459",
+      "body": "CEN/TC 459/SC 12",
       "subject": "Designation systems for steels – steel names",
-      "verified": false
+      "verified": true,
+      "title": "Designation systems for steels - Part 1: Steel names",
+      "edition": "EN 10027-1:2016",
+      "status": "published",
+      "notes": "Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 10027-2": {
       "kind": "european-standard",
       "family": "metals",
-      "body": "CEN/TC 459",
-      "subject": "Designation systems for steels – steel numbers",
-      "verified": false
+      "body": "CEN/TC 459/SC 12",
+      "subject": "Designation systems for steels - numerical system (steel numbers)",
+      "verified": true,
+      "title": "Designation systems for steels - Part 2: Numerical system",
+      "edition": "EN 10027-2:2015",
+      "status": "published",
+      "notes": "Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 10088": {
       "kind": "european-standard",
       "family": "metals",
-      "body": "CEN/TC 459",
+      "body": "CEN/TC 459/SC 13",
       "subject": "Stainless steels",
-      "verified": false
+      "verified": true,
+      "title": "Stainless steels",
+      "editions": [
+        "EN 10088-1:2023",
+        "EN 10088-2:2024",
+        "EN 10088-3:2023",
+        "EN 10088-4:2009",
+        "EN 10088-5:2009"
+      ],
+      "status": "published",
+      "notes": "Multi-part series: Part 1 list of stainless steels; Parts 2-5 technical delivery conditions by product form and use. EN 10088-4 and -5 are harmonised under Regulation (EU) No 305/2011. Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 10204": {
       "kind": "european-standard",
       "family": "metals",
-      "body": "CEN/TC 459",
+      "body": "CEN/TC 459/SC 12",
       "subject": "Metallic products – types of inspection documents",
-      "verified": false
+      "verified": true,
+      "title": "Metallic products - Types of inspection documents",
+      "edition": "EN 10204:2004",
+      "status": "published",
+      "notes": "A revision is being drafted. Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 1021-1": {
       "kind": "european-standard",
       "family": "furniture",
       "body": "CEN/TC 207",
       "subject": "Furniture – ignitability of upholstered furniture – cigarette source",
-      "verified": false
+      "verified": true,
+      "title": "Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette",
+      "edition": "EN 1021-1:2014",
+      "status": "published",
+      "notes": "Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 1021-2": {
       "kind": "european-standard",
       "family": "furniture",
       "body": "CEN/TC 207",
       "subject": "Furniture – ignitability of upholstered furniture – match-flame equivalent",
-      "verified": false
+      "verified": true,
+      "title": "Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent",
+      "edition": "EN 1021-2:2014",
+      "status": "published",
+      "notes": "Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 1090-1": {
       "kind": "european-standard",
       "family": "construction",
       "body": "CEN/TC 135",
       "subject": "Execution of steel and aluminium structures – conformity assessment of structural components",
-      "verified": false
+      "verified": true,
+      "title": "Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components",
+      "edition": "EN 1090-1:2009+A1:2011",
+      "status": "published",
+      "notes": "Harmonised under Regulation (EU) No 305/2011; no edition is yet cited under Regulation (EU) 2024/3110, and a revision is being drafted. Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 12520": {
       "kind": "european-standard",
       "family": "furniture",
       "body": "CEN/TC 207",
       "subject": "Furniture – domestic seating – strength, durability and safety",
-      "verified": false
+      "verified": true,
+      "title": "Furniture - Safety, strength and durability - Requirements for domestic seating",
+      "edition": "EN 12520:2024",
+      "status": "published",
+      "notes": "Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 12521": {
       "kind": "european-standard",
       "family": "furniture",
       "body": "CEN/TC 207",
       "subject": "Furniture – domestic tables – strength, durability and safety",
-      "verified": false
+      "verified": true,
+      "title": "Furniture - Safety, strength and durability - Requirements for domestic tables",
+      "edition": "EN 12521:2023",
+      "status": "published",
+      "notes": "Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 13300": {
       "kind": "european-standard",
       "family": "paints-coatings",
       "body": "CEN/TC 139",
-      "subject": "Paints – water-borne coatings for interior walls and ceilings – classification",
-      "verified": false
+      "subject": "Classification of paints and varnishes for interior walls and ceilings (the 2022 edition is not limited to water-borne products)",
+      "verified": true,
+      "title": "Paints and varnishes - Paints and varnishes for interior walls and ceilings - Classification",
+      "edition": "EN 13300:2022",
+      "status": "published",
+      "notes": "Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 13986": {
       "kind": "european-standard",
       "family": "construction",
       "body": "CEN/TC 112",
       "subject": "Wood-based panels for use in construction",
-      "verified": false
+      "verified": true,
+      "title": "Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking",
+      "edition": "EN 13986:2004+A1:2015",
+      "status": "published",
+      "notes": "Harmonised under Regulation (EU) No 305/2011. Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 15804": {
       "kind": "european-standard",
       "family": "environmental-footprint",
       "body": "CEN/TC 350",
       "subject": "Environmental product declarations – core rules for construction products (A2 amendment)",
-      "verified": false
+      "verified": true,
+      "title": "Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products",
+      "edition": "EN 15804:2012+A2:2019",
+      "status": "published",
+      "notes": "The A2:2019 amendment has a corrigendum (AC:2021). A revision is at preliminary stage. Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 16139": {
       "kind": "european-standard",
       "family": "furniture",
       "body": "CEN/TC 207",
       "subject": "Furniture – non-domestic seating – strength, durability and safety",
-      "verified": false
+      "verified": true,
+      "title": "Furniture - Safety, strength and durability - Requirements and test methods for non-domestic seating",
+      "edition": "EN 16139:2025",
+      "status": "published",
+      "notes": "Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 16516": {
       "kind": "european-standard",
       "family": "construction",
       "body": "CEN/TC 351",
       "subject": "Construction products – determination of emissions into indoor air",
-      "verified": false
+      "verified": true,
+      "title": "Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air",
+      "edition": "EN 16516:2017+A1:2020",
+      "status": "published",
+      "notes": "A test method; not in the harmonised list under Regulation (EU) No 305/2011. Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 1706": {
       "kind": "european-standard",
       "family": "metals",
       "body": "CEN/TC 132",
       "subject": "Aluminium castings – chemical composition and mechanical properties",
-      "verified": false
+      "verified": true,
+      "title": "Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties",
+      "edition": "EN 1706:2020+A1:2021",
+      "status": "published",
+      "notes": "Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 1725": {
       "kind": "european-standard",
       "family": "furniture",
       "body": "CEN/TC 207",
-      "subject": "Domestic furniture – beds and mattresses – safety requirements and test methods",
-      "verified": false
+      "subject": "Safety, strength and durability of beds (mattress test methods are in EN 1957)",
+      "verified": true,
+      "title": "Furniture - Beds - Requirements for safety, strength and durability",
+      "edition": "EN 1725:2023",
+      "status": "published",
+      "notes": "Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 18216": {
       "kind": "harmonised-standard",
@@ -339,69 +424,105 @@
       "family": "furniture",
       "body": "CEN/TC 207",
       "subject": "Furniture – beds and mattresses – test methods for functional characteristics",
-      "verified": false
+      "verified": true,
+      "title": "Furniture - Beds and mattresses - Test methods for the determination of functional characteristics and assessment criteria",
+      "edition": "EN 1957:2012",
+      "status": "published",
+      "notes": "Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 573-3": {
       "kind": "european-standard",
       "family": "metals",
       "body": "CEN/TC 132",
       "subject": "Aluminium – chemical composition of wrought products",
-      "verified": false
+      "verified": true,
+      "title": "Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products",
+      "edition": "EN 573-3:2026",
+      "status": "published",
+      "notes": "Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 71-1": {
       "kind": "european-standard",
       "family": "toys",
       "body": "CEN/TC 52",
       "subject": "Safety of toys – mechanical and physical properties",
-      "verified": false
+      "verified": true,
+      "title": "Safety of toys - Part 1: Mechanical and physical properties",
+      "edition": "EN 71-1:2026",
+      "status": "published",
+      "notes": "The edition cited in the Official Journal under Directive 2009/48/EC is EN 71-1:2014+A1:2018 (with a restriction), per the Commission's summary list of 12.9.2025. Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 71-2": {
       "kind": "european-standard",
       "family": "toys",
       "body": "CEN/TC 52",
       "subject": "Safety of toys – flammability",
-      "verified": false
+      "verified": true,
+      "title": "Safety of toys - Part 2: Flammability",
+      "edition": "EN 71-2:2020+A1:2025",
+      "status": "published",
+      "notes": "The edition cited in the Official Journal under Directive 2009/48/EC is EN 71-2:2020, per the Commission's summary list of 12.9.2025. Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 71-3": {
       "kind": "european-standard",
       "family": "toys",
       "body": "CEN/TC 52",
       "subject": "Safety of toys – migration of certain elements",
-      "verified": false
+      "verified": true,
+      "title": "Safety of toys - Part 3: Migration of certain elements",
+      "edition": "EN 71-3:2019+A2:2024",
+      "status": "published",
+      "notes": "This edition is cited in the Official Journal under Directive 2009/48/EC. Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN 717-1": {
       "kind": "european-standard",
       "family": "construction",
       "body": "CEN/TC 112",
       "subject": "Wood-based panels – formaldehyde release by the chamber method",
-      "verified": false
+      "verified": true,
+      "title": "Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method",
+      "edition": "EN 717-1:2004",
+      "status": "published",
+      "notes": "A replacement edition is at formal vote, so a new edition is expected soon. Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN IEC 61406-1": {
       "kind": "european-standard",
       "family": "identification-and-carriers",
-      "body": "IEC TC 65 / CENELEC",
+      "body": "IEC TC 65 / CLC/TC 65X",
       "subject": "Identification Link – Part 1",
       "editions": [
         "2022"
       ],
-      "verified": false
+      "verified": true,
+      "title": "Identification Link - Part 1: General requirements",
+      "edition": "EN IEC 61406-1:2022",
+      "status": "published",
+      "notes": "A new edition is under approval. Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN IEC 61406-2": {
       "kind": "european-standard",
       "family": "identification-and-carriers",
-      "body": "IEC TC 65 / CENELEC",
+      "body": "IEC TC 65 / CLC/TC 65X",
       "subject": "Identification Link – Part 2",
       "editions": [
         "2024"
       ],
-      "verified": false
+      "verified": true,
+      "title": "Identification link - Part 2: Types/models, lots/batches, items and characteristics",
+      "edition": "EN IEC 61406-2:2024",
+      "status": "published",
+      "notes": "Title checked against the CEN/CENELEC catalogue (committee published-standards list)."
     },
     "EN ISO 845": {
       "kind": "european-standard",
       "family": "furniture",
-      "body": "ISO/TC 61 / CEN",
+      "body": "ISO/TC 61/SC 10 / CEN",
       "subject": "Cellular plastics and rubbers – apparent density",
-      "verified": false
+      "verified": true,
+      "title": "Cellular plastics and rubbers - Determination of apparent density",
+      "edition": "EN ISO 845:2009",
+      "status": "published",
+      "notes": "EN ISO 845:2009 adopts ISO 845:2006. Title checked against the ISO Open Data catalogue."
     },
     "GS1 Digital Link": {
       "kind": "industry-specification",
@@ -412,106 +533,190 @@
         "1.6.0",
         "1.7.0"
       ],
-      "notes": "EN 18219 cites 1.6.0; 1.7.0 was ratified August 2026.",
-      "verified": false
+      "notes": "EN 18219 cites 1.6.0; 1.7.0 was ratified August 2026. Related to, but not the same document as, ISO/IEC 18975 (a generic identifier-over-HTTP standard that does not name GS1). Title checked against the GS1 standards pages.",
+      "verified": true,
+      "title": "GS1 Digital Link Standard: URI Syntax",
+      "edition": "1.7.0",
+      "status": "published"
     },
     "ISO 105-C06": {
       "kind": "international-standard",
       "family": "textiles",
-      "body": "ISO/TC 38",
+      "body": "ISO/TC 38/SC 1",
       "subject": "Textiles – colour fastness to domestic and commercial laundering",
-      "verified": false
+      "verified": true,
+      "title": "Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering",
+      "edition": "ISO 105-C06:2010",
+      "status": "published",
+      "notes": "Title checked against the ISO Open Data catalogue."
     },
     "ISO 12944": {
       "kind": "international-standard",
       "family": "paints-coatings",
-      "body": "ISO/TC 35",
+      "body": "ISO/TC 35/SC 14",
       "subject": "Corrosion protection of steel structures by protective paint systems",
-      "verified": false
+      "verified": true,
+      "title": "Paints and varnishes - Corrosion protection of steel structures by protective paint systems",
+      "editions": [
+        "ISO 12944-1:2017",
+        "ISO 12944-2:2017",
+        "ISO 12944-3:2017",
+        "ISO 12944-4:2017",
+        "ISO 12944-5:2019",
+        "ISO 12944-6:2018",
+        "ISO 12944-7:2017",
+        "ISO 12944-8:2017",
+        "ISO 12944-9:2018"
+      ],
+      "status": "published",
+      "notes": "Multi-part series (Part 2 classifies corrosivity environments). Every part is under revision. Title checked against the ISO Open Data catalogue."
     },
     "ISO 12945": {
       "kind": "international-standard",
       "family": "textiles",
-      "body": "ISO/TC 38",
+      "body": "ISO/TC 38/SC 24",
       "subject": "Textiles – pilling",
-      "verified": false
+      "verified": true,
+      "title": "Textiles - Determination of fabric propensity to surface pilling, fuzzing or matting",
+      "editions": [
+        "ISO 12945-1:2020",
+        "ISO 12945-2:2020",
+        "ISO 12945-3:2020",
+        "ISO 12945-4:2020"
+      ],
+      "status": "published",
+      "notes": "Multi-part series by test method. Title checked against the ISO Open Data catalogue."
     },
     "ISO 12947": {
       "kind": "international-standard",
       "family": "textiles",
-      "body": "ISO/TC 38",
+      "body": "ISO/TC 38/SC 24",
       "subject": "Textiles – abrasion resistance (Martindale)",
-      "verified": false
+      "verified": true,
+      "title": "Textiles - Determination of the abrasion resistance of fabrics by the Martindale method",
+      "editions": [
+        "ISO 12947-1:1998",
+        "ISO 12947-2:2016",
+        "ISO 12947-3:1998",
+        "ISO 12947-4:1998"
+      ],
+      "status": "published",
+      "notes": "Multi-part series. Title checked against the ISO Open Data catalogue."
     },
     "ISO 13937": {
       "kind": "international-standard",
       "family": "textiles",
-      "body": "ISO/TC 38",
+      "body": "ISO/TC 38/SC 24",
       "subject": "Textiles – tear properties of fabrics",
-      "verified": false
+      "verified": true,
+      "title": "Textiles - Tear properties of fabrics",
+      "editions": [
+        "ISO 13937-1:2000",
+        "ISO 13937-2:2000",
+        "ISO 13937-3:2000",
+        "ISO 13937-4:2000"
+      ],
+      "status": "published",
+      "notes": "Multi-part series by specimen shape. Title checked against the ISO Open Data catalogue."
     },
     "ISO 14025": {
       "kind": "international-standard",
-      "family": "environmental-footprint",
-      "body": "ISO/TC 207",
-      "subject": "Type III environmental declarations",
-      "verified": false
+      "family": "environmental-claims",
+      "body": "ISO/TC 207/SC 3",
+      "subject": "Environmental product declarations (EPDs)",
+      "verified": true,
+      "title": "Environmental statements and programmes for products - Environmental product declarations (EPDs)",
+      "edition": "ISO 14025:2026",
+      "status": "published",
+      "notes": "The 2026 edition replaces ISO 14025:2006 (then titled Type III environmental declarations). Title checked against the ISO Open Data catalogue."
     },
     "ISO 14046": {
       "kind": "international-standard",
       "family": "environmental-footprint",
-      "body": "ISO/TC 207",
+      "body": "ISO/TC 207/SC 5",
       "subject": "Water footprint",
-      "verified": false
+      "verified": true,
+      "title": "Environmental management - Water footprint - Principles, requirements and guidelines",
+      "edition": "ISO 14046:2014",
+      "status": "published",
+      "notes": "Title checked against the ISO Open Data catalogue."
     },
     "ISO 14067": {
       "kind": "international-standard",
       "family": "environmental-footprint",
-      "body": "ISO/TC 207",
+      "body": "ISO/TC 207/SC 7",
       "subject": "Carbon footprint of products",
-      "verified": false
+      "verified": true,
+      "title": "Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification",
+      "edition": "ISO 14067:2018",
+      "status": "published",
+      "notes": "A revision is at working-draft stage. Title checked against the ISO Open Data catalogue."
     },
     "ISO 148-1": {
       "kind": "international-standard",
       "family": "metals",
-      "body": "ISO/TC 164",
+      "body": "ISO/TC 164/SC 4",
       "subject": "Charpy pendulum impact test",
-      "verified": false
+      "verified": true,
+      "title": "Metallic materials - Charpy pendulum impact test - Part 1: Test method",
+      "edition": "ISO 148-1:2016",
+      "status": "published",
+      "notes": "A new edition is at FDIS. Title checked against the ISO Open Data catalogue."
     },
     "ISO 19447": {
       "kind": "international-standard",
       "family": "tyres",
       "body": "ISO/TC 31",
       "subject": "Tyres – ice-grip test method for C1 tyres",
-      "verified": false
+      "verified": true,
+      "title": "Passenger car tyres - Method for measuring ice grip performance - Loaded new tyres",
+      "edition": "ISO 19447:2021",
+      "status": "published",
+      "notes": "Title checked against the ISO Open Data catalogue."
     },
     "ISO 2076": {
       "kind": "international-standard",
       "family": "textiles",
       "body": "ISO/TC 38",
       "subject": "Textiles – man-made fibres – generic names",
-      "verified": false
+      "verified": true,
+      "title": "Textiles - Man-made fibres - Generic names",
+      "edition": "ISO 2076:2021",
+      "status": "published",
+      "notes": "A revision retitles it '... Generic names and specific names'. Title checked against the ISO Open Data catalogue."
     },
     "ISO 2813": {
       "kind": "international-standard",
       "family": "paints-coatings",
-      "body": "ISO/TC 35",
-      "subject": "Paints and varnishes – specular gloss",
-      "verified": false
+      "body": "ISO/TC 35/SC 9",
+      "subject": "Paints and varnishes - gloss value at 20°, 60° and 85°",
+      "verified": true,
+      "title": "Paints and varnishes - Determination of gloss value at 20°, 60° and 85°",
+      "edition": "ISO 2813:2014",
+      "status": "published",
+      "notes": "Title checked against the ISO Open Data catalogue."
     },
     "ISO 3758": {
       "kind": "international-standard",
       "family": "textiles",
-      "body": "ISO/TC 38",
+      "body": "ISO/TC 38/SC 2",
       "subject": "Textiles – care labelling code using symbols",
-      "verified": false
+      "verified": true,
+      "title": "Textiles - Care labelling code using symbols",
+      "edition": "ISO 3758:2023",
+      "status": "published",
+      "notes": "Title checked against the ISO Open Data catalogue."
     },
     "ISO 5077": {
       "kind": "international-standard",
       "family": "textiles",
-      "body": "ISO/TC 38",
+      "body": "ISO/TC 38/SC 2",
       "subject": "Textiles – dimensional change in washing and drying",
-      "verified": false
+      "verified": true,
+      "title": "Textiles - Determination of dimensional change in washing and drying",
+      "edition": "ISO 5077:2007",
+      "status": "published",
+      "notes": "Title checked against the ISO Open Data catalogue."
     },
     "ISO/IEC 15418": {
       "kind": "international-standard",
@@ -521,7 +726,11 @@
       "editions": [
         "2016"
       ],
-      "verified": false
+      "verified": true,
+      "title": "Information technology - Automatic identification and data capture techniques - GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance",
+      "edition": "ISO/IEC 15418:2016",
+      "status": "published",
+      "notes": "Title checked against the ISO Open Data catalogue."
     },
     "ISO/IEC 15459": {
       "kind": "international-standard",
@@ -533,11 +742,17 @@
         "32024R1781 Annex III"
       ],
       "editions": [
-        "2014",
-        "2015"
+        "ISO/IEC 15459-1:2014",
+        "ISO/IEC 15459-2:2015",
+        "ISO/IEC 15459-3:2014",
+        "ISO/IEC 15459-4:2014",
+        "ISO/IEC 15459-5:2014",
+        "ISO/IEC 15459-6:2014"
       ],
-      "notes": "The identifier benchmark named by Battery Regulation Art. 77(3) and ESPR Annex III until replaced; Art. 77(3) allows 'or their equivalent'.",
-      "verified": false
+      "notes": "The identifier benchmark named by Battery Regulation Art. 77(3) and ESPR Annex III until replaced; Art. 77(3) allows 'or their equivalent'. Multi-part series (Part 8 is withdrawn). Title checked against the ISO Open Data catalogue.",
+      "verified": true,
+      "title": "Information technology - Automatic identification and data capture techniques - Unique identification",
+      "status": "published"
     },
     "ISO/IEC 16022": {
       "kind": "international-standard",
@@ -547,7 +762,11 @@
       "editions": [
         "2024"
       ],
-      "verified": false
+      "verified": true,
+      "title": "Information technology - Automatic identification and data capture techniques - Data Matrix bar code symbology specification",
+      "edition": "ISO/IEC 16022:2024",
+      "status": "published",
+      "notes": "Title checked against the ISO Open Data catalogue."
     },
     "ISO/IEC 18004": {
       "kind": "international-standard",
@@ -557,52 +776,73 @@
       "editions": [
         "2024"
       ],
-      "verified": false
+      "verified": true,
+      "title": "Information technology - Automatic identification and data capture techniques - QR code bar code symbology specification",
+      "edition": "ISO/IEC 18004:2024",
+      "status": "published",
+      "notes": "A revision is at working-draft stage. Title checked against the ISO Open Data catalogue."
     },
     "ISO/IEC 18975": {
       "kind": "international-standard",
       "family": "identification-and-carriers",
       "body": "ISO/IEC JTC 1/SC 31",
       "subject": "Encoding and resolving identifiers over HTTP",
-      "editions": [
-        "2024"
-      ],
-      "verified": false
+      "verified": true,
+      "title": "Information technology - Automatic identification and data capture techniques - Encoding and resolving identifiers over HTTP",
+      "edition": "ISO/IEC 18975:2024",
+      "status": "published",
+      "notes": "Title checked against the ISO Open Data catalogue."
     },
     "UNECE R108": {
       "kind": "un-regulation",
       "family": "tyres",
       "body": "UNECE WP.29",
       "subject": "Retreaded tyres for passenger cars (C1)",
-      "verified": false
+      "verified": true,
+      "title": "UN Regulation No 108 - Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for motor vehicles and their trailers",
+      "status": "published",
+      "notes": "The current series and amendment level is not confirmed. Title checked against the Official Journal text of the regulation (UNECE's own site blocks automated access)."
     },
     "UNECE R109": {
       "kind": "un-regulation",
       "family": "tyres",
       "body": "UNECE WP.29",
       "subject": "Retreaded tyres for commercial vehicles (C2/C3)",
-      "verified": false
+      "verified": true,
+      "title": "UN Regulation No 109 - Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for commercial vehicles and their trailers",
+      "status": "published",
+      "notes": "The current series and amendment level is not confirmed. Title checked against the Official Journal text of the regulation (UNECE's own site blocks automated access)."
     },
     "UNECE R30": {
       "kind": "un-regulation",
       "family": "tyres",
       "body": "UNECE WP.29",
       "subject": "Pneumatic tyres for passenger cars (C1)",
-      "verified": false
+      "verified": true,
+      "title": "Uniform provisions concerning the approval of pneumatic tyres for motor vehicles and their trailers",
+      "status": "published",
+      "notes": "The current revision is not confirmed. Title checked against the Official Journal text of the regulation (UNECE's own site blocks automated access)."
     },
     "UNECE R54": {
       "kind": "un-regulation",
       "family": "tyres",
       "body": "UNECE WP.29",
       "subject": "Pneumatic tyres for commercial vehicles (C2/C3)",
-      "verified": false
+      "verified": true,
+      "title": "Uniform provisions concerning the approval of pneumatic tyres for commercial vehicles and their trailers",
+      "status": "published",
+      "notes": "The current revision is not confirmed. Title checked against the Official Journal text of the regulation (UNECE's own site blocks automated access)."
     },
     "ISO 14021": {
       "kind": "international-standard",
-      "family": "environmental-footprint",
-      "body": "ISO/TC 207",
-      "subject": "Self-declared environmental claims (Type II), incl. recycled-content definitions",
-      "verified": false
+      "family": "environmental-claims",
+      "body": "ISO/TC 207/SC 3",
+      "subject": "Self-declared environmental claims, incl. recycled-content definitions",
+      "verified": true,
+      "title": "Environmental statements and programmes for products - Self-declared environmental claims",
+      "edition": "ISO 14021:2026",
+      "status": "published",
+      "notes": "The 2026 edition replaces ISO 14021:2016 and its 2021 amendment. Title checked against the ISO Open Data catalogue."
     }
   }
 }

package/templates/jewelry.json

@@ -5756,7 +5756,7 @@
       "label": {
         "en": "Carbon Footprint",
         "bg": "Въглероден отпечатък",
-        "de": "CO2-Fussabdruck",
+        "de": "CO2-Fußabdruck",
         "fr": "Empreinte Carbone",
         "hr": "Ugljični otisak",
         "cs": "Uhlíková stopa",

package/templates/textile.json

@@ -2451,7 +2451,7 @@
       "label": {
         "en": "Carbon Footprint",
         "bg": "Въглероден отпечатък",
-        "de": "CO2-Fussabdruck",
+        "de": "CO2-Fußabdruck",
         "nl": "Koolstofvoetafdruk",
         "hr": "Ugljični otisak",
         "cs": "Uhlíková stopa",
@@ -2568,7 +2568,7 @@
       "label": {
         "en": "Environmental Footprint Score (PEF)",
         "bg": "Екологичен отпечатък (PEF)",
-        "de": "Umweltfussabdruck (PEF)",
+        "de": "Umweltfußabdruck (PEF)",
         "nl": "Milieuvoerafdrukscore (PEF)",
         "hr": "Ocjena otiska na okoliš (PEF)",
         "cs": "Skóre environmentální stopy (PEF)",
@@ -3190,7 +3190,7 @@
       "label": {
         "en": "Pilling Resistance",
         "bg": "Устойчивост на пилинг",
-        "de": "Pillingbestandigkeit",
+        "de": "Pillingbeständigkeit",
         "nl": "Pluisbestendigheid",
         "hr": "Otpornost na pilling",
         "cs": "Odolnost proti žmolkování",
@@ -3650,7 +3650,7 @@
       "label": {
         "en": "Dimensional Stability (Shrinkage)",
         "bg": "Размерна стабилност (свиване)",
-        "de": "Dimensionsstabilitat (Schrumpfung)",
+        "de": "Dimensionsstabilität (Schrumpfung)",
         "nl": "Dimensionale stabiliteit (krimpen)",
         "hr": "Dimenzijska stabilnost (skupljanje)",
         "cs": "Rozměrová stálost (srážlivost)",
@@ -3766,7 +3766,7 @@
       "label": {
         "en": "Tear Strength",
         "bg": "Устойчивост на скъсване",
-        "de": "Reissfestigkeit",
+        "de": "Reißfestigkeit",
         "nl": "Scheuursterkte",
         "hr": "Čvrstoća trganja",
         "cs": "Pevnost v dotržení",
@@ -3993,7 +3993,7 @@
       "label": {
         "en": "Spare Parts Availability",
         "bg": "Наличност на резервни части",
-        "de": "Ersatzteilverfugbarkeit",
+        "de": "Ersatzteilverfügbarkeit",
         "nl": "Beschikbaarheid onderdelen",
         "hr": "Dostupnost rezervnih dijelova",
         "cs": "Dostupnost náhradních dílů",
@@ -4435,7 +4435,7 @@
       "label": {
         "en": "Take-Back Program",
         "bg": "Програма за обратно приемане",
-        "de": "Rucknahmeprogramm",
+        "de": "Rücknahmeprogramm",
         "nl": "Terugneem-programma",
         "hr": "Program preuzimanja",
         "cs": "Program zpětného odběru",
@@ -4771,7 +4771,7 @@
       "label": {
         "en": "Supply Chain Traceability",
         "bg": "Проследимост на веригата за доставки",
-        "de": "Lieferkettenruckverfolgbarkeit",
+        "de": "Lieferkettenrückverfolgbarkeit",
         "nl": "Traceerbaarheid van de toeleveringsketen",
         "hr": "Sljedivost opskrbnog lanca",
         "cs": "Sledovatelnost dodavatelského řetězce",
@@ -4989,7 +4989,7 @@
       "label": {
         "en": "Dyeing Country",
         "bg": "Страна на багрене",
-        "de": "Farbeland",
+        "de": "Färbeland",
         "nl": "Verfland",
         "hr": "Zemlja bojenja",
         "cs": "Země barvení",
@@ -5202,7 +5202,7 @@
       "label": {
         "en": "Dyeing Method",
         "bg": "Метод на багрене",
-        "de": "Farbeverfahren",
+        "de": "Färbeverfahren",
         "nl": "Verfmethode",
         "hr": "Metoda bojenja",
         "cs": "Metoda barvení",
@@ -5872,7 +5872,7 @@
           "label": {
             "en": "Road",
             "bg": "Шосеен",
-            "de": "Strasse",
+            "de": "Straße",
             "nl": "Weg",
             "hr": "Cesta",
             "cs": "Silnice",
@@ -6316,7 +6316,7 @@
       "label": {
         "en": "Packaging Recyclability",
         "bg": "Възможност за възможност за рециклиране на опаковка",
-        "de": "Recyclingfahigkeit der Verpackung",
+        "de": "Recyclingfähigkeit der Verpackung",
         "nl": "Recyclingbaarheid verpakking",
         "hr": "Recikličnost ambalaže",
         "cs": "Recyklovatelnost obalu",
@@ -6425,7 +6425,7 @@
       "label": {
         "en": "Eco-Score Value",
         "bg": "Стойност на еко-оценка",
-        "de": "Oko-Bewertungswert",
+        "de": "Öko-Bewertungswert",
         "nl": "Eco-Score-waarde",
         "hr": "Vrijednost Eco-Scorea",
         "cs": "Hodnota Eco-Score",
@@ -6486,7 +6486,7 @@
       "categoryLabel": {
         "en": "French Eco-Score",
         "bg": "Френска еко-оценка",
-        "de": "Franzosischer Oko-Score",
+        "de": "Französischer Öko-Score",
         "nl": "Franse Eco-Score",
         "hr": "Francuski Eco-Score",
         "cs": "Francouzské Eco-Score",
@@ -6532,7 +6532,7 @@
       "label": {
         "en": "Eco-Score Grade",
         "bg": "Клас на еко-оценка",
-        "de": "Oko-Bewertungsklasse",
+        "de": "Öko-Bewertungsklasse",
         "nl": "Eco-Score-graad",
         "hr": "Ocjena Eco-Scorea",
         "cs": "Třída Eco-Score",
@@ -6739,7 +6739,7 @@
       "categoryLabel": {
         "en": "French Eco-Score",
         "bg": "Френска еко-оценка",
-        "de": "Franzosischer Oko-Score",
+        "de": "Französischer Öko-Score",
         "nl": "Franse Eco-Score",
         "hr": "Francuski Eco-Score",
         "cs": "Francouzské Eco-Score",
@@ -6847,7 +6847,7 @@
       "categoryLabel": {
         "en": "French Eco-Score",
         "bg": "Френска еко-оценка",
-        "de": "Franzosischer Oko-Score",
+        "de": "Französischer Öko-Score",
         "nl": "Franse Eco-Score",
         "hr": "Francuski Eco-Score",
         "cs": "Francouzské Eco-Score",
@@ -6955,7 +6955,7 @@
       "categoryLabel": {
         "en": "French Eco-Score",
         "bg": "Френска еко-оценка",
-        "de": "Franzosischer Oko-Score",
+        "de": "Französischer Öko-Score",
         "nl": "Franse Eco-Score",
         "hr": "Francuski Eco-Score",
         "cs": "Francouzské Eco-Score",
@@ -7062,7 +7062,7 @@
       "categoryLabel": {
         "en": "French Eco-Score",
         "bg": "Френска еко-оценка",
-        "de": "Franzosischer Oko-Score",
+        "de": "Französischer Öko-Score",
         "nl": "Franse Eco-Score",
         "hr": "Francuski Eco-Score",
         "cs": "Francouzské Eco-Score",
@@ -7108,7 +7108,7 @@
       "label": {
         "en": "PEF Resource Depletion",
         "bg": "PEF изчерпване на ресурси",
-        "de": "PEF Ressourcenerschopfung",
+        "de": "PEF Ressourcenerschöpfung",
         "nl": "PEF Bronnenuitputting",
         "hr": "PEF iscrpljivanje resursa",
         "cs": "PEF vyčerpávání zdrojů",
@@ -7169,7 +7169,7 @@
       "categoryLabel": {
         "en": "French Eco-Score",
         "bg": "Френска еко-оценка",
-        "de": "Franzosischer Oko-Score",
+        "de": "Französischer Öko-Score",
         "nl": "Franse Eco-Score",
         "hr": "Francuski Eco-Score",
         "cs": "Francouzské Eco-Score",
@@ -7277,7 +7277,7 @@
       "categoryLabel": {
         "en": "French Eco-Score",
         "bg": "Френска еко-оценка",
-        "de": "Franzosischer Oko-Score",
+        "de": "Französischer Öko-Score",
         "nl": "Franse Eco-Score",
         "hr": "Francuski Eco-Score",
         "cs": "Francouzské Eco-Score",
@@ -7384,7 +7384,7 @@
       "categoryLabel": {
         "en": "French Eco-Score",
         "bg": "Френска еко-оценка",
-        "de": "Franzosischer Oko-Score",
+        "de": "Französischer Öko-Score",
         "nl": "Franse Eco-Score",
         "hr": "Francuski Eco-Score",
         "cs": "Francouzské Eco-Score",
@@ -7644,7 +7644,7 @@
       "label": {
         "en": "French Eco-Score",
         "bg": "Френска еко-оценка",
-        "de": "Franzosischer Oko-Score",
+        "de": "Französischer Öko-Score",
         "nl": "Franse Eco-Score",
         "hr": "Francuski Eco-Score",
         "cs": "Francouzské Eco-Score",

package/templates/tyres.json

@@ -2390,7 +2390,7 @@
       "label": {
         "en": "Tyre Size Designation",
         "bg": "Означение на размера на гумата",
-        "de": "Reifengroeenbezeichnung",
+        "de": "Reifengrößenbezeichnung",
         "hr": "Oznaka veličine gume",
         "cs": "Označení rozměru pneumatiky",
         "da": "Dækstørrelsesbetegnelse",
@@ -2503,7 +2503,7 @@
       "label": {
         "en": "Load Capacity Index",
         "bg": "Индекс на товароносимост",
-        "de": "Tragfaehigkeitsindex",
+        "de": "Tragfähigkeitsindex",
         "hr": "Indeks nosivosti",
         "cs": "Index nosnosti",
         "da": "Belastningsindeks",
@@ -3620,7 +3620,7 @@
       "label": {
         "en": "Aspect Ratio",
         "bg": "Съотношение на профила",
-        "de": "Querschnittsverhaeltnis",
+        "de": "Querschnittsverhältnis",
         "hr": "Omjer visine i širine",
         "cs": "Profil (poměr výšky a šířky)",
         "da": "Højde-bredde-forhold",
@@ -4784,7 +4784,7 @@
       "label": {
         "en": "External Rolling Noise Class",
         "bg": "Клас на външен шум при търкаляне",
-        "de": "Externe Rollgeraeuschklasse",
+        "de": "Externe Rollgeräuschklasse",
         "hr": "Klasa vanjske buke kotrljanja",
         "cs": "Třída vnějšího hluku odvalování",
         "da": "Klasse for ekstern rullestøj",
@@ -4981,7 +4981,7 @@
       "label": {
         "en": "External Rolling Noise (dB)",
         "bg": "Външен шум при търкаляне (dB)",
-        "de": "Externes Rollgeraeusch (dB)",
+        "de": "Externes Rollgeräusch (dB)",
         "hr": "Vanjska buka kotrljanja (dB)",
         "cs": "Vnější hluk odvalování (dB)",
         "da": "Ekstern rullestøj (dB)",
@@ -5533,7 +5533,7 @@
       "label": {
         "en": "Abrasion Test Method",
         "bg": "Метод на изпитване за износване",
-        "de": "Abriebpruefverfahren",
+        "de": "Abriebprüfverfahren",
         "hr": "Metoda ispitivanja abrazije",
         "cs": "Metoda zkoušky otěru",
         "da": "Slid-testmetode",
@@ -6167,7 +6167,7 @@
       "label": {
         "en": "Bill of Materials",
         "bg": "Спецификация на материалите",
-        "de": "Stueckliste",
+        "de": "Stückliste",
         "hr": "Popis materijala",
         "cs": "Kusovník",
         "da": "Materialeliste",
@@ -6724,7 +6724,7 @@
       "label": {
         "en": "Recycled Carbon Black (%)",
         "bg": "Рециклиран въглероден черен (%)",
-        "de": "Recycelter Russ (%)",
+        "de": "Recycelter Ruß (%)",
         "hr": "Reciklirana čađa (%)",
         "cs": "Recyklované saze (%)",
         "da": "Genanvendt carbon black (%)",
@@ -7267,7 +7267,7 @@
       "label": {
         "en": "Heavy Metals Compliance",
         "bg": "Съответствие с изискванията за тежки метали",
-        "de": "Schwermetall-Konformitaet",
+        "de": "Schwermetall-Konformität",
         "hr": "Sukladnost s teškim metalima",
         "cs": "Soulad s limity těžkých kovů",
         "da": "Overensstemmelse med tungmetaller",
@@ -7376,7 +7376,7 @@
       "label": {
         "en": "REACH Compliance",
         "bg": "Съответствие с REACH",
-        "de": "REACH-Konformitaet",
+        "de": "REACH-Konformität",
         "hr": "Sukladnost s REACH-om",
         "cs": "Soulad s REACH",
         "da": "REACH-overensstemmelse",
@@ -7485,7 +7485,7 @@
       "label": {
         "en": "Carbon Footprint (kg CO2e)",
         "bg": "Въглероден отпечатък (kg CO2e)",
-        "de": "CO2-Fussabdruck (kg CO2e)",
+        "de": "CO2-Fußabdruck (kg CO2e)",
         "hr": "Ugljični otisak (kg CO2e)",
         "cs": "Uhlíková stopa (kg CO2e)",
         "da": "CO2-aftryk (kg CO2e)",
@@ -7598,7 +7598,7 @@
       "label": {
         "en": "Carbon Footprint Methodology",
         "bg": "Методология за въглероден отпечатък",
-        "de": "CO2-Fussabdruck-Methodik",
+        "de": "CO2-Fußabdruck-Methodik",
         "hr": "Metodologija ugljičnog otiska",
         "cs": "Metodika uhlíkové stopy",
         "da": "CO2-aftryksmetode",
@@ -7709,7 +7709,7 @@
       "label": {
         "en": "Fuel Savings Over Lifetime (liters)",
         "bg": "Спестяване на гориво за целия живот (литри)",
-        "de": "Kraftstoffeinsparung ueber Lebensdauer (Liter)",
+        "de": "Kraftstoffeinsparung über Lebensdauer (Liter)",
         "hr": "Ušteda goriva tijekom životnog vijeka (litre)",
         "cs": "Úspory paliva za dobu životnosti (litry)",
         "da": "Brændstofbesparelser over levetiden (liter)",
@@ -7816,7 +7816,7 @@
       "label": {
         "en": "CO2 Savings Over Lifetime (kg)",
         "bg": "Спестяване на CO2 за целия живот (кг)",
-        "de": "CO2-Einsparung ueber Lebensdauer (kg)",
+        "de": "CO2-Einsparung über Lebensdauer (kg)",
         "hr": "Ušteda CO2 tijekom životnog vijeka (kg)",
         "cs": "Úspory CO2 za dobu životnosti (kg)",
         "da": "CO2-besparelser over levetiden (kg)",
@@ -8032,7 +8032,7 @@
       "label": {
         "en": "Natural Rubber Sustainability Certification",
         "bg": "Сертификат за устойчивост на натурален каучук",
-        "de": "Nachhaltigkeitszertifizierung fuer Naturkautschuk",
+        "de": "Nachhaltigkeitszertifizierung für Naturkautschuk",
         "hr": "Certifikat održivosti prirodne gume",
         "cs": "Certifikace udržitelnosti přírodního kaučuku",
         "da": "Bæredygtighedscertificering for naturgummi",
@@ -8252,7 +8252,7 @@
       "label": {
         "en": "Treadwear Rating",
         "bg": "Рейтинг на износване на протектора",
-        "de": "Laufflaechen-Abriebwert",
+        "de": "Laufflächen-Abriebwert",
         "hr": "Ocjena trošenja profila",
         "cs": "Hodnocení opotřebení dezénu",
         "da": "Slidklassificering af mønster",
@@ -8576,7 +8576,7 @@
       "label": {
         "en": "Max Age Recommendation (years)",
         "bg": "Препоръчителна максимална възраст (години)",
-        "de": "Empfohlenes Hoechstalter (Jahre)",
+        "de": "Empfohlenes Höchstalter (Jahre)",
         "hr": "Preporuka maksimalne starosti (godine)",
         "cs": "Doporučené maximální stáří (roky)",
         "da": "Anbefalet maksimal alder (år)",
@@ -8907,7 +8907,7 @@
       "label": {
         "en": "Retread Service Life Extension (km)",
         "bg": "Удължаване на живота при регенериране (км)",
-        "de": "Lebensdauerverlaengerung durch Runderneuerung (km)",
+        "de": "Lebensdauerverlängerung durch Runderneuerung (km)",
         "hr": "Produljenje životnog vijeka protektiranjem (km)",
         "cs": "Prodloužení provozní životnosti protektorováním (km)",
         "da": "Forlængelse af servicelevetid ved regummiering (km)",
@@ -9012,7 +9012,7 @@
       "label": {
         "en": "Recyclability (%)",
         "bg": "Възможност за възможност за рециклиране (%)",
-        "de": "Recyclingfaehigkeit (%)",
+        "de": "Recyclingfähigkeit (%)",
         "hr": "Mogućnost recikliranja (%)",
         "cs": "Recyklovatelnost (%)",
         "da": "Genanvendelighed (%)",
@@ -9123,7 +9123,7 @@
       "label": {
         "en": "Recyclability Breakdown",
         "bg": "Разбивка на възможността за възможност за рециклиране",
-        "de": "Recyclingaufschluesselung",
+        "de": "Recyclingaufschlüsselung",
         "hr": "Razrada mogućnosti recikliranja",
         "cs": "Rozpis recyklovatelnosti",
         "da": "Oversigt over genanvendelighed",
@@ -9344,7 +9344,7 @@
       "label": {
         "en": "Disassembly Instructions URL",
         "bg": "URL за инструкции за разглобяване",
-        "de": "URL fuer Demontageanleitungen",
+        "de": "URL für Demontageanleitungen",
         "hr": "URL uputa za rastavljanje",
         "cs": "URL pokynů k demontáži",
         "da": "URL til demonteringsvejledning",
@@ -9724,7 +9724,7 @@
       "categoryLabel": {
         "en": "Compliance and Type Approval",
         "bg": "Съответствие и одобрение на типа",
-        "de": "Konformitaet und Typgenehmigung",
+        "de": "Konformität und Typgenehmigung",
         "hr": "Usklađenost i homologacija",
         "cs": "Soulad a schválení typu",
         "da": "Overensstemmelse og typegodkendelse",
@@ -9773,7 +9773,7 @@
       "label": {
         "en": "Euro 7 Compliance",
         "bg": "Съответствие с Евро 7",
-        "de": "Euro 7-Konformitaet",
+        "de": "Euro 7-Konformität",
         "hr": "Sukladnost s Euro 7",
         "cs": "Soulad s Euro 7",
         "da": "Euro 7-overensstemmelse",
@@ -9834,7 +9834,7 @@
       "categoryLabel": {
         "en": "Compliance and Type Approval",
         "bg": "Съответствие и одобрение на типа",
-        "de": "Konformitaet und Typgenehmigung",
+        "de": "Konformität und Typgenehmigung",
         "hr": "Usklađenost i homologacija",
         "cs": "Soulad a schválení typu",
         "da": "Overensstemmelse og typegodkendelse",
@@ -9942,7 +9942,7 @@
       "categoryLabel": {
         "en": "Compliance and Type Approval",
         "bg": "Съответствие и одобрение на типа",
-        "de": "Konformitaet und Typgenehmigung",
+        "de": "Konformität und Typgenehmigung",
         "hr": "Usklađenost i homologacija",
         "cs": "Soulad a schválení typu",
         "da": "Overensstemmelse og typegodkendelse",
@@ -9990,7 +9990,7 @@
       "label": {
         "en": "Declaration of Conformity URL",
         "bg": "URL на декларация за съответствие",
-        "de": "URL der Konformitaetserklaerung",
+        "de": "URL der Konformitätserklärung",
         "hr": "URL izjave o sukladnosti",
         "cs": "URL prohlášení o shodě",
         "da": "URL til overensstemmelseserklæring",
@@ -10051,7 +10051,7 @@
       "categoryLabel": {
         "en": "Compliance and Type Approval",
         "bg": "Съответствие и одобрение на типа",
-        "de": "Konformitaet und Typgenehmigung",
+        "de": "Konformität und Typgenehmigung",
         "hr": "Usklađenost i homologacija",
         "cs": "Soulad a schválení typu",
         "da": "Overensstemmelse og typegodkendelse",
@@ -10163,7 +10163,7 @@
       "categoryLabel": {
         "en": "Compliance and Type Approval",
         "bg": "Съответствие и одобрение на типа",
-        "de": "Konformitaet und Typgenehmigung",
+        "de": "Konformität und Typgenehmigung",
         "hr": "Usklađenost i homologacija",
         "cs": "Soulad a schválení typu",
         "da": "Overensstemmelse og typegodkendelse",
@@ -10427,7 +10427,7 @@
       "label": {
         "en": "Maximum Load (kg)",
         "bg": "Максимално натоварване (кг)",
-        "de": "Hoechstlast (kg)",
+        "de": "Höchstlast (kg)",
         "hr": "Maksimalno opterećenje (kg)",
         "cs": "Maximální zatížení (kg)",
         "da": "Maksimal belastning (kg)",
@@ -11769,7 +11769,7 @@
       "label": {
         "en": "Compliance and Type Approval",
         "bg": "Съответствие и одобрение на типа",
-        "de": "Konformitaet und Typgenehmigung",
+        "de": "Konformität und Typgenehmigung",
         "hr": "Usklađenost i homologacija",
         "cs": "Soulad a schválení typu",
         "da": "Overensstemmelse og typegodkendelse",