@torrent-tv/proxy 2.87.9 → 2.87.11

package/services/encode/output/rates.js

@@ -1,125 +1,125 @@
-/**
- * @file How many bits of film there are per second of playback.
- *
- * A fact about the OUTPUT, and the two figures the HLS specification asks for:
- * the average over the whole variant, and the peak one segment reaches. Both
- * are measured — the average from the file's own length and duration, the peak
- * from the biggest piece actually produced and the span it covers.
- *
- * It used to be `height * height * 3.2`, a rule of thumb, justified by a comment
- * saying the measurement was not available before encoding starts. It is: the
- * length and the duration are known when the session is created, and the peak
- * refines itself as pieces appear. Field 2026-09-08: 3.73 Mbit/s declared for a
- * file carrying 18.4, and the browser's cushion is sized in BYTES from that
- * figure — 120 s asked bought 26 s of film.
- *
- * Pure: plain numbers in, plain numbers out. Nothing here knows what a session,
- * a store or a torrent is.
- */
-
-/**
- * The two rates to declare, from what has been measured of this file.
- *
- * @param {object} params
- * @param {number} params.fileLength - Bytes of the source file, 0 until the
- *   torrent has said. Counts every track and every byte of container, so it is
- *   the better figure of the two.
- * @param {number} params.durationSeconds
- * @param {number} [params.streamBitsPerSecond] - What a probe read off the
- *   video stream, known from session creation. Lower than the whole file's rate
- *   because it is one track of it, and used while the length is not known.
- * @param {{ index: number, size: number }} [params.largest] - The biggest piece
- *   produced so far, with its number. An index of `-1` means none yet.
- * @param {number[]} [params.boundaries] - Where the file is cut, so the biggest
- *   piece's own span is known. Bytes alone cannot give a rate.
- * @returns {{ averageBitsPerSecond: number, peakOverAverage: number }}
- */
-export function declaredRates({
-  fileLength,
-  durationSeconds,
-  streamBitsPerSecond = 0,
-  largest = null,
-  boundaries = null
-}) {
-  const length = Number(fileLength);
-  const duration = Number(durationSeconds);
-  // TWO SOURCES, AND THE LARGER OF THEM, because each is measured and each can
-  // be absent — and absent is 0, so the larger is whichever was measured.
-  //
-  //  - the whole file's length over its duration: the best figure, since it
-  //    counts every track and every byte of container. Known only once the
-  //    torrent has reported the file's size;
-  //  - what the probe read off the video stream: known when the session is
-  //    created, and lower, because it is one track of several.
-  //
-  // The first alone was what shipped in 2.80.14, read from a field that does
-  // not exist on a source file. It came back 0 on every session, so every
-  // variant was declared at the 400 kbit/s floor — nine times WORSE than the
-  // rule of thumb it replaced — and the browser, which sizes its cushion in
-  // bytes from this figure, held 0.1 s of film against 120 s asked. The picture
-  // stood still for 116.7 s of one viewing. Assuming a field instead of
-  // checking it is the whole of that fault.
-  const fromLength = length > 0 && duration > 0 ? (length * 8) / duration : 0;
-  const averageBitsPerSecond = Math.max(fromLength, Number(streamBitsPerSecond) || 0);
-  if (!(averageBitsPerSecond > 0)) {
-    return { averageBitsPerSecond: 0, peakOverAverage: 1 };
-  }
-  const index = Number(largest?.index);
-  const size = Number(largest?.size);
-  if (!Number.isInteger(index) || index < 0 || !(size > 0) || !Array.isArray(boundaries)) {
-    // Nothing has been produced, so the peak is not yet a measured quantity and
-    // is declared equal to the average. It rises as soon as one piece exists,
-    // and a ratio invented meanwhile would be exactly the fabrication this file
-    // replaced.
-    return { averageBitsPerSecond, peakOverAverage: 1 };
-  }
-  const span = Number(boundaries[index + 1]) - Number(boundaries[index]);
-  if (!(span > 0)) {
-    return { averageBitsPerSecond, peakOverAverage: 1 };
-  }
-  // Never below one: the peak cannot be under the average, and a piece that
-  // happens to be the smallest in a short session must not lower the figure the
-  // player sizes its cushion from.
-  return {
-    averageBitsPerSecond,
-    peakOverAverage: Math.max(1, ((size * 8) / span) / averageBitsPerSecond)
-  };
-}
-
-/**
- * The three arguments the master playlist needs to declare its rates.
- *
- * Assembled here rather than at the call site, because all three are facts
- * about the OUTPUT and none of them is a fact about a session: the file's own
- * length and duration, the biggest piece made of it, and the cap imposed on the
- * one height being produced. The caller holds them and passes them as numbers.
- *
- * Only the height being produced has a cap — the other heights do not exist
- * yet, and stating one for them would be a guess about a session nobody has
- * made.
- *
- * @param {object} params
- * @param {number} params.fileLength
- * @param {number} params.durationSeconds
- * @param {number} [params.streamBitsPerSecond]
- * @param {{ index: number, size: number } | null} [params.largest]
- * @param {number[] | null} [params.boundaries]
- * @param {number} [params.producedHeight] - The height this output encodes at.
- * @param {number} [params.capKbps] - What that height is capped at, if it is.
- * @returns {{ averageBitsPerSecond: number, peakOverAverage: number,
- *   capKbpsFor: (height: number) => number }}
- */
-export function masterRateArgs({
-  fileLength,
-  durationSeconds,
-  streamBitsPerSecond = 0,
-  largest = null,
-  boundaries = null,
-  producedHeight = 0,
-  capKbps = 0
-}) {
-  return {
-    ...declaredRates({ fileLength, durationSeconds, streamBitsPerSecond, largest, boundaries }),
-    capKbpsFor: (height) => (height === producedHeight ? capKbps : 0)
-  };
-}
+/**
+ * @file How many bits of film there are per second of playback.
+ *
+ * A fact about the OUTPUT, and the two figures the HLS specification asks for:
+ * the average over the whole variant, and the peak one segment reaches. Both
+ * are measured — the average from the file's own length and duration, the peak
+ * from the biggest piece actually produced and the span it covers.
+ *
+ * It used to be `height * height * 3.2`, a rule of thumb, justified by a comment
+ * saying the measurement was not available before encoding starts. It is: the
+ * length and the duration are known when the session is created, and the peak
+ * refines itself as pieces appear. Field 2026-09-08: 3.73 Mbit/s declared for a
+ * file carrying 18.4, and the browser's cushion is sized in BYTES from that
+ * figure — 120 s asked bought 26 s of film.
+ *
+ * Pure: plain numbers in, plain numbers out. Nothing here knows what a session,
+ * a store or a torrent is.
+ */
+
+/**
+ * The two rates to declare, from what has been measured of this file.
+ *
+ * @param {object} params
+ * @param {number} params.fileLength - Bytes of the source file, 0 until the
+ *   torrent has said. Counts every track and every byte of container, so it is
+ *   the better figure of the two.
+ * @param {number} params.durationSeconds
+ * @param {number} [params.streamBitsPerSecond] - What a probe read off the
+ *   video stream, known from session creation. Lower than the whole file's rate
+ *   because it is one track of it, and used while the length is not known.
+ * @param {{ index: number, size: number }} [params.largest] - The biggest piece
+ *   produced so far, with its number. An index of `-1` means none yet.
+ * @param {number[]} [params.boundaries] - Where the file is cut, so the biggest
+ *   piece's own span is known. Bytes alone cannot give a rate.
+ * @returns {{ averageBitsPerSecond: number, peakOverAverage: number }}
+ */
+export function declaredRates({
+  fileLength,
+  durationSeconds,
+  streamBitsPerSecond = 0,
+  largest = null,
+  boundaries = null
+}) {
+  const length = Number(fileLength);
+  const duration = Number(durationSeconds);
+  // TWO SOURCES, AND THE LARGER OF THEM, because each is measured and each can
+  // be absent — and absent is 0, so the larger is whichever was measured.
+  //
+  //  - the whole file's length over its duration: the best figure, since it
+  //    counts every track and every byte of container. Known only once the
+  //    torrent has reported the file's size;
+  //  - what the probe read off the video stream: known when the session is
+  //    created, and lower, because it is one track of several.
+  //
+  // The first alone was what shipped in 2.80.14, read from a field that does
+  // not exist on a source file. It came back 0 on every session, so every
+  // variant was declared at the 400 kbit/s floor — nine times WORSE than the
+  // rule of thumb it replaced — and the browser, which sizes its cushion in
+  // bytes from this figure, held 0.1 s of film against 120 s asked. The picture
+  // stood still for 116.7 s of one viewing. Assuming a field instead of
+  // checking it is the whole of that fault.
+  const fromLength = length > 0 && duration > 0 ? (length * 8) / duration : 0;
+  const averageBitsPerSecond = Math.max(fromLength, Number(streamBitsPerSecond) || 0);
+  if (!(averageBitsPerSecond > 0)) {
+    return { averageBitsPerSecond: 0, peakOverAverage: 1 };
+  }
+  const index = Number(largest?.index);
+  const size = Number(largest?.size);
+  if (!Number.isInteger(index) || index < 0 || !(size > 0) || !Array.isArray(boundaries)) {
+    // Nothing has been produced, so the peak is not yet a measured quantity and
+    // is declared equal to the average. It rises as soon as one piece exists,
+    // and a ratio invented meanwhile would be exactly the fabrication this file
+    // replaced.
+    return { averageBitsPerSecond, peakOverAverage: 1 };
+  }
+  const span = Number(boundaries[index + 1]) - Number(boundaries[index]);
+  if (!(span > 0)) {
+    return { averageBitsPerSecond, peakOverAverage: 1 };
+  }
+  // Never below one: the peak cannot be under the average, and a piece that
+  // happens to be the smallest in a short session must not lower the figure the
+  // player sizes its cushion from.
+  return {
+    averageBitsPerSecond,
+    peakOverAverage: Math.max(1, ((size * 8) / span) / averageBitsPerSecond)
+  };
+}
+
+/**
+ * The three arguments the master playlist needs to declare its rates.
+ *
+ * Assembled here rather than at the call site, because all three are facts
+ * about the OUTPUT and none of them is a fact about a session: the file's own
+ * length and duration, the biggest piece made of it, and the cap imposed on the
+ * one height being produced. The caller holds them and passes them as numbers.
+ *
+ * Only the height being produced has a cap — the other heights do not exist
+ * yet, and stating one for them would be a guess about a session nobody has
+ * made.
+ *
+ * @param {object} params
+ * @param {number} params.fileLength
+ * @param {number} params.durationSeconds
+ * @param {number} [params.streamBitsPerSecond]
+ * @param {{ index: number, size: number } | null} [params.largest]
+ * @param {number[] | null} [params.boundaries]
+ * @param {number} [params.producedHeight] - The height this output encodes at.
+ * @param {number} [params.capKbps] - What that height is capped at, if it is.
+ * @returns {{ averageBitsPerSecond: number, peakOverAverage: number,
+ *   capKbpsFor: (height: number) => number }}
+ */
+export function masterRateArgs({
+  fileLength,
+  durationSeconds,
+  streamBitsPerSecond = 0,
+  largest = null,
+  boundaries = null,
+  producedHeight = 0,
+  capKbps = 0
+}) {
+  return {
+    ...declaredRates({ fileLength, durationSeconds, streamBitsPerSecond, largest, boundaries }),
+    capKbpsFor: (height) => (height === producedHeight ? capKbps : 0)
+  };
+}

package/services/encode/output-key-format.js

@@ -1,21 +1,21 @@
-/**
- * @file Which container an output's segments are in, read from its key.
- *
- * The key names the format produced, so a directory of segments can be read
- * back without any record kept elsewhere — which is what adopting segments an
- * earlier process left behind needs. A key in a shape this version does not
- * write (one naming the box a viewer asked for rather than the format
- * produced) cannot say what is inside, and the answer is null.
- */
-
-import { OutputSpec } from "./output/index.js";
-import { resolveSegmentFormat, SEGMENT_FORMAT_IDS } from "./segment-formats/index.js";
-
-/**
- * @param {string} key
- * @returns {object | null} The segment format, or null when the key cannot say.
- */
-export function segmentFormatOfKey(key) {
-  const stated = OutputSpec.fromKey(key)?.segmentFormatId ?? "";
-  return SEGMENT_FORMAT_IDS.includes(stated) ? resolveSegmentFormat(stated) : null;
-}
+/**
+ * @file Which container an output's segments are in, read from its key.
+ *
+ * The key names the format produced, so a directory of segments can be read
+ * back without any record kept elsewhere — which is what adopting segments an
+ * earlier process left behind needs. A key in a shape this version does not
+ * write (one naming the box a viewer asked for rather than the format
+ * produced) cannot say what is inside, and the answer is null.
+ */
+
+import { OutputSpec } from "./output/index.js";
+import { resolveSegmentFormat, SEGMENT_FORMAT_IDS } from "./segment-formats/index.js";
+
+/**
+ * @param {string} key
+ * @returns {object | null} The segment format, or null when the key cannot say.
+ */
+export function segmentFormatOfKey(key) {
+  const stated = OutputSpec.fromKey(key)?.segmentFormatId ?? "";
+  return SEGMENT_FORMAT_IDS.includes(stated) ? resolveSegmentFormat(stated) : null;
+}