@toolpath/tool-scraper 0.1.0 → 2.1.0

package/dist/families/harvey.d.ts

@@ -0,0 +1,1782 @@
+/**
+ * Harvey Tool's families — one per product page, 52 of them.
+ *
+ * A family here is a product page, because that is the unit Harvey publishes:
+ * one page carries one product line's whole variant table, and its
+ * `productCode` — `HT-Harvey-EndMill-008` — is the vendor's own name for it.
+ * That code is the `familyCode`; the CSV name and the family id are derived
+ * from it, so nothing here invents a label.
+ *
+ * ## Where the scrape target lives, and why it is not in the definition
+ *
+ * A Harvey scrape needs a product-page **path**, and `FamilyDefinition` has no
+ * key for one — `familyCode` is the vendor's code and a path is not that.
+ * Harvey's slugs are also not derivable from the code: three of the 52 say
+ * `end-mills-` where the rest say `miniature-end-mills-`, and the separators
+ * change from `---` to `-` partway through the catalog.
+ *
+ * So {@link PRODUCT_PAGES} is a second table beside the first, keyed by the same
+ * CSV name, and `tests/harvey-families.test.ts` holds the two to the same keys.
+ * The alternative — widening the shared `FamilyDefinition` with a key one vendor
+ * uses — would put a Harvey fact in the type every family in the catalog is
+ * written against.
+ *
+ * ## `rows` is Harvey's count, not this adapter's
+ *
+ * Every count below was read on 2026-08-29 by summing the `T` entries of each
+ * table row's own add-to-cart payload (`atc.j`) across all 80 tables — Harvey's
+ * independent statement of what is orderable, not a number this adapter
+ * produced. That is what makes `receipts.checkRows` worth running, and it is the
+ * same list `vendors/harvey/scrape.ts` checks the matrix explosion against on
+ * every row.
+ *
+ * It is still a script's count rather than a person's. The payload lists 12,799
+ * entries across 5,033 HTML rows; **26 of them are not parts.** Two families
+ * carry the marketing string `25x Diameter!` / `30x Diameter!` in a tool-number
+ * column, with no product link and no CAD model, and Harvey's own payload lists
+ * those as if they were orderable. The adapter drops them and warns, so the two
+ * counts below are the payload's minus that vendor fault: 12,773 real parts.
+ *
+ * ## `NOF` maps a column the adapter synthesises
+ *
+ * Half these tables state the flute count in a column of their own and half
+ * state it in a coating group's sub-header, so `vendors/harvey/scrape.ts`
+ * writes one `FLUTES` column either way and every family maps `NOF` to it. The
+ * two exceptions are the deburring families, which publish right- and left-hand
+ * tooth counts and no flute count at all — `NOF` is absent there because the
+ * vendor states none, not because the mapping was forgotten.
+ *
+ * ## Every family is `endmill`
+ *
+ * Including the twelve keyseat-cutter families. `records.ToolKind` has three
+ * values — `drill`, `tap`, `endmill` — and a keyseat cutter is a side-cutting
+ * milling tool with a cutting diameter, a width of cut, a shank and an overall
+ * length, so it maps onto the endmill contract exactly. Adding a fourth kind for
+ * it would be a cross-package contract change, and nothing downstream is asking
+ * for one yet.
+ */
+import type { UnitSystem } from '../conventions.js';
+import type { Fact } from '../provenance.js';
+export declare const FAMILIES: {
+    readonly 'harvey_endmill_001.csv': {
+        readonly id: "endmill-001";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-001";
+        readonly rows: 28;
+        readonly columns: {
+            readonly DC: "CUTTER DIAMETER";
+            readonly SFDM: "SHANK DIAMETER";
+            readonly OAL: "OVERALL LENGTH";
+            readonly LCF: "LENGTH OF CUT";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_002.csv': {
+        readonly id: "endmill-002";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-002";
+        readonly rows: 44;
+        readonly columns: {
+            readonly DC: "CUTTER DIAMETER";
+            readonly SFDM: "SHANK DIAMETER";
+            readonly OAL: "OVERALL LENGTH";
+            readonly LCF: "LENGTH OF CUT";
+            readonly RE: "CORNER RADIUS";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_003.csv': {
+        readonly id: "endmill-003";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-003";
+        readonly rows: 49;
+        readonly columns: {
+            readonly DC: "CUTTER DIAMETER";
+            readonly SFDM: "SHANK DIAMETER";
+            readonly OAL: "OVERALL LENGTH";
+            readonly LCF: "LENGTH OF CUT";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_004.csv': {
+        readonly id: "endmill-004";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-004";
+        readonly rows: 389;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LENGTH OF CUT";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_005.csv': {
+        readonly id: "endmill-005";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-005";
+        readonly rows: 95;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LENGTH OF CUT";
+            readonly 'shoulder-length': "OVERALL REACH";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_006.csv': {
+        readonly id: "endmill-006";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-006";
+        readonly rows: 284;
+        readonly columns: {
+            readonly DC: "CUTTER DIAMETER";
+            readonly SFDM: "SHANK DIAMETER";
+            readonly OAL: "OVERALL LENGTH";
+            readonly LCF: "LENGTH OF CUT";
+            readonly 'shoulder-length': "OVERALL REACH";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_007.csv': {
+        readonly id: "endmill-007";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-007";
+        readonly rows: 718;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LOC";
+            readonly 'shoulder-length': "OVERALL REACH";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_008.csv': {
+        readonly id: "endmill-008";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-008";
+        readonly rows: 840;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LOC";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_009.csv': {
+        readonly id: "endmill-009";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-009";
+        readonly rows: 171;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LOC";
+            readonly 'shoulder-length': "OVERALL REACH";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_010.csv': {
+        readonly id: "endmill-010";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-010";
+        readonly rows: 178;
+        readonly columns: {
+            readonly DC: "CUTTER DIAMETER";
+            readonly SFDM: "SHANK DIAMETER";
+            readonly OAL: "OVERALL LENGTH";
+            readonly LCF: "LENGTH OF CUT";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_011.csv': {
+        readonly id: "endmill-011";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-011";
+        readonly rows: 293;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LENGTH OF CUT";
+            readonly RE: "CORNER RADIUS";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_012.csv': {
+        readonly id: "endmill-012";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-012";
+        readonly rows: 154;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LOC";
+            readonly RE: "CORNER RADIUS";
+            readonly 'shoulder-length': "OVERALL REACH";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_013.csv': {
+        readonly id: "endmill-013";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-013";
+        readonly rows: 598;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LOC";
+            readonly RE: "CORNER RADIUS";
+            readonly 'shoulder-length': "OVERALL REACH";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_014.csv': {
+        readonly id: "endmill-014";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-014";
+        readonly rows: 1344;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LENGTH OF CUT";
+            readonly RE: "CORNER RADIUS";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_015.csv': {
+        readonly id: "endmill-015";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-015";
+        readonly rows: 18;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LOC";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_016.csv': {
+        readonly id: "endmill-016";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-016";
+        readonly rows: 734;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LENGTH OF CUT";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_017.csv': {
+        readonly id: "endmill-017";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-017";
+        readonly rows: 194;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LENGTH OF CUT";
+            readonly 'shoulder-length': "OVERALL REACH";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_018.csv': {
+        readonly id: "endmill-018";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-018";
+        readonly rows: 519;
+        readonly columns: {
+            readonly DC: "CUTTER DIAMETER";
+            readonly SFDM: "SHANK DIAMETER";
+            readonly OAL: "OVERALL LENGTH";
+            readonly LCF: "LENGTH OF CUT";
+            readonly 'shoulder-length': "OVERALL REACH";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_019.csv': {
+        readonly id: "endmill-019";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-019";
+        readonly rows: 1026;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LOC";
+            readonly 'shoulder-length': "OVERALL REACH";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_020.csv': {
+        readonly id: "endmill-020";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-020";
+        readonly rows: 1239;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LOC";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_021.csv': {
+        readonly id: "endmill-021";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-021";
+        readonly rows: 88;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LOC";
+            readonly 'shoulder-length': "OVERALL REACH";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_022.csv': {
+        readonly id: "endmill-022";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-022";
+        readonly rows: 371;
+        readonly columns: {
+            readonly DC: "CUTTER DIAMETER";
+            readonly SFDM: "SHANK DIAMETER";
+            readonly OAL: "OVERALL LENGTH";
+            readonly LCF: "LENGTH OF CUT";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_023.csv': {
+        readonly id: "endmill-023";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-023";
+        readonly rows: 26;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LOC";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_025.csv': {
+        readonly id: "endmill-025";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-025";
+        readonly rows: 10;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LOC";
+            readonly 'shoulder-length': "OVERALL REACH";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_026.csv': {
+        readonly id: "endmill-026";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-026";
+        readonly rows: 12;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LOC";
+            readonly RE: "CORNER RADIUS";
+            readonly 'shoulder-length': "OVERALL REACH";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_027.csv': {
+        readonly id: "endmill-027";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-027";
+        readonly rows: 20;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LOC";
+            readonly 'shoulder-length': "OVERALL REACH";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_028.csv': {
+        readonly id: "endmill-028";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-028";
+        readonly rows: 36;
+        readonly columns: {
+            readonly DC: "CUTTER DIAMETER";
+            readonly SFDM: "SHANK DIAMETER";
+            readonly OAL: "OVERALL LENGTH";
+            readonly LCF: "LENGTH OF CUT";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_029.csv': {
+        readonly id: "endmill-029";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-029";
+        readonly rows: 152;
+        readonly columns: {
+            readonly DC: "CUTTER DIAMETER";
+            readonly SFDM: "SHANK DIAMETER";
+            readonly OAL: "OVERALL LENGTH";
+            readonly LCF: "LENGTH OF CUT";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_030.csv': {
+        readonly id: "endmill-030";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-030";
+        readonly rows: 144;
+        readonly columns: {
+            readonly DC: "CUTTER DIAMETER";
+            readonly SFDM: "SHANK DIAMETER";
+            readonly OAL: "OVERALL LENGTH";
+            readonly LCF: "LENGTH OF CUT";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_031.csv': {
+        readonly id: "endmill-031";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-031";
+        readonly rows: 170;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LOC";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_032.csv': {
+        readonly id: "endmill-032";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-032";
+        readonly rows: 24;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LOC";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: true;
+                readonly source: "vendor-stated";
+                readonly cite: "the page's own productTitle, 'Miniature End Mills - Square - Coolant Through'";
+            };
+        };
+    };
+    readonly 'harvey_endmill_033.csv': {
+        readonly id: "endmill-033";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-033";
+        readonly rows: 122;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LOC";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_034.csv': {
+        readonly id: "endmill-034";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-034";
+        readonly rows: 154;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LENGTH OF CUT";
+            readonly RE: "CORNER RADIUS";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_035.csv': {
+        readonly id: "endmill-035";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-035";
+        readonly rows: 40;
+        readonly columns: {
+            readonly DC: "CUTTER DIAMETER";
+            readonly SFDM: "SHANK DIAMETER";
+            readonly OAL: "OVERALL LENGTH";
+            readonly LCF: "LENGTH OF CUT";
+            readonly RE: "CORNER RADIUS";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_036.csv': {
+        readonly id: "endmill-036";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-036";
+        readonly rows: 32;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LENGTH OF CUT";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_037.csv': {
+        readonly id: "endmill-037";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-037";
+        readonly rows: 32;
+        readonly columns: {
+            readonly DC: "CUTTER DIAMETER";
+            readonly SFDM: "SHANK DIAMETER";
+            readonly OAL: "OVERALL LENGTH";
+            readonly LCF: "LENGTH OF CUT";
+            readonly 'shoulder-length': "OVERALL REACH";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_038.csv': {
+        readonly id: "endmill-038";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-038";
+        readonly rows: 64;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LENGTH OF CUT";
+            readonly RE: "CORNER RADIUS";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_039.csv': {
+        readonly id: "endmill-039";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-039";
+        readonly rows: 44;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LENGTH OF CUT";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_041.csv': {
+        readonly id: "endmill-041";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-041";
+        readonly rows: 32;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LENGTH OF CUT";
+            readonly 'shoulder-length': "OVERALL REACH";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_endmill_042.csv': {
+        readonly id: "endmill-042";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-EndMill-042";
+        readonly rows: 24;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "LENGTH OF CUT";
+            readonly RE: "CORNER RADIUS";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_keyseat_001.csv': {
+        readonly id: "keyseat-001";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-Keyseat-001";
+        readonly rows: 345;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "CUTTER WIDTH";
+            readonly RE: "CORNER RADIUS";
+            readonly 'shoulder-length': "NECK LENGTH";
+            readonly 'shoulder-diameter': "NECK DIA.";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_keyseat_002.csv': {
+        readonly id: "keyseat-002";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-Keyseat-002";
+        readonly rows: 114;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "CUTTER WIDTH";
+            readonly RE: "CORNER RADIUS";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_keyseat_003.csv': {
+        readonly id: "keyseat-003";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-Keyseat-003";
+        readonly rows: 174;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "CUTTER WIDTH";
+            readonly RE: "RADIUS";
+            readonly 'shoulder-length': "NECK LENGTH";
+            readonly 'shoulder-diameter': "NECK DIA.";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_keyseat_004.csv': {
+        readonly id: "keyseat-004";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-Keyseat-004";
+        readonly rows: 74;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "CUTTER WIDTH";
+            readonly RE: "RADIUS";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_keyseat_005.csv': {
+        readonly id: "keyseat-005";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-Keyseat-005";
+        readonly rows: 26;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "CUTTER WIDTH";
+            readonly 'shoulder-length': "NECK LENGTH";
+            readonly 'shoulder-diameter': "NECK DIA.";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: {
+                readonly value: "Square";
+                readonly source: "assumed";
+                readonly note: string;
+                readonly checked: "2026-08-29";
+                readonly by: "JG";
+            };
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_keyseat_006.csv': {
+        readonly id: "keyseat-006";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-Keyseat-006";
+        readonly rows: 926;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "CUTTER WIDTH";
+            readonly 'shoulder-length': "NECK LENGTH";
+            readonly 'shoulder-diameter': "NECK DIA.";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_keyseat_007.csv': {
+        readonly id: "keyseat-007";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-Keyseat-007";
+        readonly rows: 49;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "CUTTER WIDTH";
+            readonly 'shoulder-length': "NECK LENGTH";
+            readonly 'shoulder-diameter': "NECK DIA.";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_keyseat_008.csv': {
+        readonly id: "keyseat-008";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-Keyseat-008";
+        readonly rows: 108;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "CUTTER WIDTH";
+            readonly 'shoulder-length': "NECK LENGTH";
+            readonly 'shoulder-diameter': "NECK DIA.";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_keyseat_009.csv': {
+        readonly id: "keyseat-009";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-Keyseat-009";
+        readonly rows: 220;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "CUTTER WIDTH";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_keyseat_010.csv': {
+        readonly id: "keyseat-010";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-Keyseat-010";
+        readonly rows: 101;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "CUTTER WIDTH";
+            readonly RE: "CORNER RADIUS";
+            readonly 'shoulder-length': "NECK LENGTH";
+            readonly 'shoulder-diameter': "NECK DIA.";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_keyseat_011.csv': {
+        readonly id: "keyseat-011";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-Keyseat-011";
+        readonly rows: 88;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "CUTTER WIDTH";
+            readonly 'shoulder-length': "NECK LENGTH";
+            readonly 'shoulder-diameter': "NECK DIA.";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+    readonly 'harvey_keyseat_012.csv': {
+        readonly id: "keyseat-012";
+        readonly brand: "harvey";
+        readonly kind: "endmill";
+        readonly familyCode: "HT-Harvey-Keyseat-012";
+        readonly rows: 36;
+        readonly columns: {
+            readonly DC: "CUTTER DIA.";
+            readonly SFDM: "SHANK DIA.";
+            readonly OAL: "OAL";
+            readonly LCF: "CUTTER WIDTH";
+            readonly NOF: "FLUTES";
+        };
+        readonly facts: {
+            readonly unit: {
+                readonly value: UnitSystem;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly bmc: {
+                readonly value: string;
+                readonly source: "vendor-stated";
+                readonly cite: string;
+            };
+            readonly profile: Fact<string>;
+            readonly coolantThrough: {
+                readonly value: boolean;
+                readonly source: "derived";
+                readonly note: string;
+            };
+        };
+    };
+};
+/**
+ * The product page each family is scraped from, keyed by its CSV name.
+ *
+ * Paths rather than URLs: `vendors/harvey/scrape.ts` owns the host, so a family
+ * config cannot put a scrape on a different one.
+ */
+export declare const PRODUCT_PAGES: Readonly<Record<string, string>>;