@toolpath/dfm 1.0.0 → 1.1.0

package/dist/{chunk-XHYPKN4E.js → chunk-IB42AM6A.js}

@@ -488,7 +488,7 @@ var FEATURE_METRICS = [
     op: "gte",
     start: { mm: 500, inch: 508 },
     path: ["facts.wallLength.length", "facts.length"],
-    kinds: ["Pocket", "Boss", "Wall", "Profile"],
+    kinds: ["Pocket", "Boss", "Wall", "CircularWall", "Profile"],
     hint: "How far a pass around its outline travels, with a tool of no width"
   }),
   define({
@@ -980,11 +980,11 @@ var GROUP_SUBJECTS = [
   { value: "pocket", label: "Pockets", group: "Groups", kinds: POCKET_KINDS },
   { value: "slot", label: "Slots", group: "Groups", kinds: UNDERCUT_KINDS },
   { value: "undercut", label: "Undercuts", group: "Groups", kinds: UNDERCUT_KINDS },
-  { value: "boss", label: "Bosses", group: "Groups", kinds: ["Boss"] },
+  { value: "boss", label: "Bosses", group: "Groups", kinds: ["Boss", "CircularWall"] },
   { value: "countersink", label: "Countersinks", group: "Groups", kinds: ["Hole", "Chamfer"] },
   { value: "profile", label: "Profiles", group: "Groups", kinds: ["Profile"] },
   { value: "contour", label: "3D surfaces", group: "Groups", kinds: SURFACE_KINDS },
-  { value: "wall", label: "Walls", group: "Groups", kinds: ["Wall"] },
+  { value: "wall", label: "Walls", group: "Groups", kinds: ["Wall", "CircularWall"] },
   { value: "face", label: "Faces", group: "Groups", kinds: ["Face", "Three"] },
   { value: "fillet", label: "Fillets", group: "Groups", kinds: SURFACE_KINDS },
   { value: "chamfer", label: "Chamfers", group: "Groups", kinds: ["Chamfer"] }
@@ -1007,6 +1007,7 @@ var TYPES = [
   ["filleted_open_pocket", "Filleted open pockets", POCKET_KINDS],
   ["boss", "Bosses", ["Boss"]],
   ["filleted_boss", "Filleted bosses", ["Boss"]],
+  ["circular_wall", "Circular walls", ["CircularWall"]],
   ["wall", "Wall features", ["Wall"]],
   ["face", "Face features", ["Face"]],
   ["slanted_face", "Slanted faces", ["Face", "Three"]],
@@ -1339,6 +1340,7 @@ var howCut = (sheet) => {
 var featureIs = (subject, featureType, sheet) => {
   const type = featureType.toLowerCase();
   const kind = sheet?.kind?.toLowerCase() ?? "";
+  const boss = sheet?.standsOnAFloor === true;
   if (subject.startsWith(TYPE_SUBJECT)) return type === subject.slice(TYPE_SUBJECT.length);
   switch (subject) {
     case "any":
@@ -1360,7 +1362,7 @@ var featureIs = (subject, featureType, sheet) => {
     case "contour":
       return type.includes("contour") || kind.includes("contour");
     case "wall":
-      return type.includes("wall") || kind === "wall";
+      return !boss && (type.includes("wall") || kind === "wall");
     case "face":
       return type === "face" || kind === "face";
     case "fillet":
@@ -1368,7 +1370,7 @@ var featureIs = (subject, featureType, sheet) => {
     case "chamfer":
       return type.includes("chamfer") || kind === "chamfer";
     case "boss":
-      return type.includes("boss") || kind === "boss";
+      return boss || type.includes("boss") || kind === "boss";
     case "countersink":
       return type === "sink";
     case "profile":
@@ -1725,6 +1727,7 @@ var featureSheet = (datasheet) => {
   fields.fitToolDiameter = asNumber2(toolFit.toolDiameter);
   fields.fitCornerRadius = asNumber2(toolFit.cornerRadius);
   const ballOnly = (facts.useOnlyBallToolsForFinish ?? recordOf2(facts.three).useOnlyBallToolsForFinish) === true;
+  const standsOnAFloor = kind === "CircularWall" && facts.standsOnAFloor === true;
   const measured = Object.fromEntries(
     Object.entries(fields).filter(([, value]) => value !== void 0)
   );
@@ -1751,6 +1754,7 @@ var featureSheet = (datasheet) => {
     ...sharp ? { sharpCorners: pinchCentres(sheet.pinchPoints) } : {},
     ...cramped ? { noToolFits: true } : {},
     ...ballOnly ? { ballOnly: true } : {},
+    ...standsOnAFloor ? { standsOnAFloor: true } : {},
     ...threading ? { threading } : {},
     ...undercut ? { undercut } : {}
   };

package/dist/index.js

@@ -63,7 +63,7 @@ import {
   withOp,
   withSubject,
   withSurroundedFaces
-} from "./chunk-XHYPKN4E.js";
+} from "./chunk-IB42AM6A.js";
 export {
   CRITICAL_COLOR,
   FILE_KIND,

package/dist/model/index.d.ts

@@ -123,6 +123,12 @@ interface FeatureSheet {
     toolFitPath?: string;
     /** For a contour surface: only a ball end mill can finish it, not a bull nose. */
     ballOnly?: true;
+    /**
+     * For a circular wall — the outside of a whole cylinder: it rises from a
+     * floor, so it is machined as a boss, as a stud or round boss is, rather than
+     * as a wall, as a turned part's outline is.
+     */
+    standsOnAFloor?: true;
     /**
      * The feature's minimum clearance: the smallest of its pinch discs
      * (`pinchPoints`), the tolerance taken out, leaving out the zero-wide ones
@@ -248,7 +254,7 @@ type DfmOp = 'gte' | 'gt' | 'lte' | 'lt' | 'eq' | 'ne' | 'between';
  */
 type DfmQuantity = 'length' | 'area' | 'angle' | 'ratio' | 'count' | 'percent' | 'flag' | 'presence';
 /** A datasheet's `facts.kind`: which family of measurements the Engine took. */
-type FactsKind = 'Hole' | 'Pocket' | 'Boss' | 'Wall' | 'Face' | 'Three' | 'Chamfer' | 'Profile' | 'Dovetail' | 'Tslot';
+type FactsKind = 'Hole' | 'Pocket' | 'Boss' | 'Wall' | 'CircularWall' | 'Face' | 'Three' | 'Chamfer' | 'Profile' | 'Dovetail' | 'Tslot';
 /** A datasheet's `facts.kind`, milled or turned. */
 type AnyFactsKind = FactsKind | TurnedFactsKind;
 interface DfmMetric {

package/dist/model/index.js

@@ -63,7 +63,7 @@ import {
   withOp,
   withSubject,
   withSurroundedFaces
-} from "../chunk-XHYPKN4E.js";
+} from "../chunk-IB42AM6A.js";
 export {
   CRITICAL_COLOR,
   FILE_KIND,

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@toolpath/dfm",
-  "version": "1.0.0",
+  "version": "1.1.0",
   "description": "Toolpath DFM rules: the rules, the part checker, and the rule-set file. Logic only; the views are in @toolpath/ui",
   "license": "MIT",
   "engines": {
@@ -47,7 +47,7 @@
     "tsup": "8.5.1",
     "typescript": "5.9.3",
     "vitest": "4.1.10",
-    "@toolpath/api": "^0.9.0"
+    "@toolpath/api": "^0.10.0"
   },
   "scripts": {
     "build": "tsup src/index.ts src/model/index.ts --format esm --dts --clean",