@tikoci/quickchr 0.5.1 → 0.5.2

package/.bun-version

@@ -0,0 +1 @@
+1.4.4

package/DESIGN.md

@@ -245,7 +245,9 @@ CI, integration and release all install, enforced by `scripts/check-bun-pin.ts`
 runtime could change between two identical commits — and did: a six-week gap with no `ci.yml`
 runs spanned the Bun 1.4.0 release, and the next PR inherited a 1.3.14 → 1.4.2 jump as if it
 were its own regression. Anything that can turn the build red is a dependency and belongs in
-a reviewable diff; "whatever is newest at run time" is not a version.
+a reviewable diff; "whatever is newest at run time" is not a version. The same
+`.bun-version` file ships in the npm package so `doctor` can name the tested
+runtime and warn when the running Bun is older without duplicating the pin.
 
 **The 2026-07 refactor (#29)** replaced the organically-grown scheme (integration on every
 PR push, three parallel copies of the runner logic, `continue-on-error` green-washing)

package/MANUAL.md

@@ -64,7 +64,7 @@ by the user (or their AI agent) using `quickchr` as a building block.
 | Bun ≥ 1.1 | runtime | macOS/Linux: `curl -fsSL https://bun.sh/install \| bash` · Windows: `powershell -c "irm bun.sh/install.ps1 \| iex"` (or `winget install Oven-sh.Bun`) |
 | `qemu-system-x86_64` | x86 CHR | brew/apt/dnf/pacman · Windows: `winget install SoftwareFreedomConservancy.QEMU` |
 | `qemu-system-aarch64` | arm64 CHR | brew/apt/dnf/pacman · Windows: bundled in the SFC QEMU package above |
-| `qemu-img` | `--boot-size`, `--add-disk`, snapshots | included in all standard QEMU packages (brew, apt, dnf, SFC installer) |
+| `qemu-img` | Default qcow2 creation, setup wizard, `--boot-size`, `--add-disk`, snapshots | included in all standard QEMU packages (brew, apt, dnf, SFC installer) |
 | UEFI firmware (edk2) | arm64 CHR | `qemu-efi-aarch64` (apt), `edk2-aarch64` (dnf), bundled with `qemu` (brew) |
 | `socket_vmnet` (optional) | rootless `shared`/`bridged` networking on macOS | `brew install socket_vmnet` |
 | `socat` (optional) | piping serial console externally | brew/apt |
@@ -116,7 +116,9 @@ The `--json` form emits `{ ok, checks, staleImages }`, where `checks` is an
 array of `{ label, status, detail }` and `staleImages` lists cached images older
 than the current long-term release. The exit code still reflects `ok`.
 
-![quickchr doctor output](./images/doctor-demo.gif)
+`doctor` reports the tested Bun pin and warns when the running runtime is older.
+
+![quickchr doctor output](./docs/images/doctor-demo.gif)
 
 Use this whenever a `start` fails — the diagnostic almost always points
 at a missing dependency, missing firmware, or insufficient disk.
@@ -125,7 +127,7 @@ at a missing dependency, missing firmware, or insufficient disk.
 
 ## 3. CLI command reference
 
-The dispatcher lives in `src/cli/index.ts` (lines 121–194). Help text is
+The dispatcher lives in `src/cli/index.ts`. Help text is
 available for every command via `quickchr help <command>`.
 
 ### Lifecycle
@@ -138,14 +140,14 @@ directory, downloads the RouterOS image (cached), and writes
 
 | Flag | Default | Notes |
 |---|---|---|
-| `--name <s>` | auto | `host-arch-N` if omitted |
+| `--name <s>` | auto | `version-arch-N` if omitted |
 | `--version <ver>` | latest in channel | e.g., `7.22.1` |
 | `--channel <ch>` | `stable` | `stable`, `long-term`, `testing`, `development` |
 | `--arch <a>` | host native | `arm64`, `x86`, or `auto` |
 | `--cpu <n>` | `1` | vCPU count |
 | `--mem <mb>` | `512` | RAM (cross-arch TCG bumps to `1024`) |
 | `--boot-disk-format <f>` | `qcow2` | `qcow2` or `raw` |
-| `--boot-size <size>` | — | Resize boot disk; needs `qemu-img`; auto-converts to qcow2 |
+| `--boot-size <size>` | — | Resize qcow2 boot disk; needs `qemu-img`; explicit raw is refused |
 | `--add-disk <size>` | — | Extra blank qcow2 disk; repeatable |
 | `--forward <spec>` | — | Extra hostfwd port or built-in service host-port pin; repeatable. See §Custom port forwards. |
 | `--add-package <pkg>` | — | Provisioning, repeatable, ≥ 7.20.8 |
@@ -486,7 +488,7 @@ Interactive wizard (`@clack/prompts`) that walks through all machine creation
 options and starts the CHR. Triggered by `quickchr setup` or automatically
 when `quickchr` is run with no subcommand on a TTY.
 
-![quickchr setup wizard walkthrough](./images/wizard-demo.gif)
+![quickchr setup wizard walkthrough](./docs/images/wizard-demo.gif)
 
 **First-run detection**: if no machines exist yet, the wizard opens with a
 welcome message before the first prompt.
@@ -513,7 +515,10 @@ another machine, view status, or quit.
 | 12 | Run mode: background / foreground | background | (default) / `--fg` |
 | 13 | Final confirmation | — | — |
 
-Steps 7–9 are skipped when `qemu-img` is absent (a warning is shown). Step 10
+The wizard requires `qemu-img` and refuses before any prompts or image downloads
+when it is absent, showing the install remedy. For a raw x86 boot without `qemu-img`,
+use `quickchr add --arch x86 --boot-disk-format raw` to create a stopped machine,
+then `quickchr start <name>` with the returned name to boot it. Step 10
 only appears when the platform supports networks beyond user-mode (macOS or
 Linux). The provisioning gate (step 11) only appears for RouterOS ≥ 7.20.8;
 older versions show an upgrade prompt.
@@ -597,7 +602,7 @@ default output form when writing step outputs directly.
   process that wrote it is alive (an extraction: for 30 minutes after its last
   write). `prune` removes stale ones before anything else.
 
-`cache list --json` prints one object per entry, including `kind` (`image`, `image-zip`,
+`cache list --json` prints an array of entry objects, including `kind` (`image`, `image-zip`,
 `packages` or `partial`) and `paths` (every file deleting the entry removes).
 Files in the cache that quickchr did not write are reported as "Other files"
 and never deleted. `prune` and `clear` never delete an in-use entry.
@@ -690,7 +695,7 @@ mutate any machine's `machine.json`.
 
 | Env var | Effect |
 |---|---|
-| `QUICKCHR_DATA_DIR` | Override the data root (defaults to `$XDG_DATA_HOME/quickchr` or platform equivalent — see §8) |
+| `QUICKCHR_DATA_DIR` | Override the data root (defaults to `~/.local/share/quickchr` on POSIX or the Windows path — see §8) |
 | `QUICKCHR_NO_PROMPT` | Force non-interactive mode (skips all wizards) |
 | `QUICKCHR_DEBUG` | Emit `[debug]` lines from the progress logger |
 | `QUICKCHR_INTEGRATION` | Required to run `test/integration/` |
@@ -1257,10 +1262,10 @@ restrictions, half-open SLiRP under TCG), see `docs/networking.md`.
 
 ## 8. Storage layout
 
-### macOS / Linux (XDG)
+### macOS / Linux
 
 ```text
-$XDG_DATA_HOME/quickchr/  (defaults to ~/.local/share/quickchr/)
+~/.local/share/quickchr/
 ├── .allocate.lock/              held while a new machine picks its ports/MACs
 ├── cache/                       Downloaded RouterOS images
 │   ├── chr-7.22.1.img.zip
@@ -1283,8 +1288,8 @@ $XDG_DATA_HOME/quickchr/  (defaults to ~/.local/share/quickchr/)
     └── <name>.json
 ```
 
-`$XDG_DATA_HOME` defaults to `~/.local/share/quickchr/`. Override the
-whole tree with `QUICKCHR_DATA_DIR=/some/path`.
+The data root is `~/.local/share/quickchr/`; `XDG_DATA_HOME` does not
+change it. Override the whole tree with `QUICKCHR_DATA_DIR=/some/path`.
 
 **Global settings** live separately, under the XDG **config** tier, not this
 data tree: `~/.config/quickchr/quickchr.env` (dotenv-style). See §3's
@@ -1581,12 +1586,16 @@ ceiling.
 
 ### Boot disk
 
-Default format is **raw** (the image MikroTik ships). `--boot-size`
-auto-converts to **qcow2** before the first boot and resizes to the
-requested size. Requires `qemu-img` on the host.
+The CLI and wizard default to **qcow2**, converted from the raw MikroTik
+image before first boot. Creating qcow2 requires `qemu-img` even without resize.
+`--boot-size` resizes qcow2 to the requested size; explicitly selecting raw
+with a boot size is refused. Without `--boot-size`, qcow2 keeps the original
+image size and enables snapshots.
 
-`--boot-disk-format=qcow2` (without `--boot-size`) just keeps the
-default size but enables snapshots.
+Library callers default to **raw** unless `bootSize` implies qcow2. CLI users
+can select raw explicitly with `--boot-disk-format raw`. On x86, this permits
+creation without `qemu-img` when no resize or extra disks are requested. ARM64
+also needs `qemu-img` for its writable UEFI firmware disk.
 
 ### Extra disks
 

package/README.md

@@ -1,11 +1,5 @@
 # quickchr
 
-> **Experimental** — quickchr is under active development. Most testing has been on
-> macOS (Apple Silicon + Intel), with CI on Linux (x86_64 + aarch64). Windows support
-> is early-stage: unit tests pass on `windows-latest` CI, and a weekly sweep boots a real
-> CHR on Windows (TCG, anchor smoke subset only). Expect rough edges on Windows — bug
-> reports welcome.
-
 CLI and library to download, launch, and manage MikroTik CHR virtual machines via QEMU.
 
 ## Quick Start
@@ -14,7 +8,7 @@ CLI and library to download, launch, and manage MikroTik CHR virtual machines vi
 
 - [Bun](https://bun.sh) runtime
 - [QEMU](https://www.qemu.org) with `qemu-system-x86_64` and/or `qemu-system-aarch64`
-- `qemu-img` for disk resize and extra-disk features (`--boot-size`, `--add-disk`, `quickchr disk`)
+- `qemu-img` for default qcow2 creation, the setup wizard, disk resize, extra disks, and snapshots
 - UEFI firmware (edk2) for arm64 CHR
 
 Install QEMU:
@@ -60,7 +54,7 @@ bun add @tikoci/quickchr
 ### Prerelease QA (0.5.1)
 
 0.5.1 is published to npm `next` first; the unqualified install above uses `latest`,
-and 0.5.1 is promoted there once QA passes. After 0.5.1 is published, pin it for
+and 0.5.1 is promoted there once QA passes. Pin this published candidate for
 reproducible CLI or library QA:
 
 ```bash
@@ -77,7 +71,8 @@ The [0.5.0 notes](./CHANGELOG.md#050--2026-10-22) cover migration from 0.4.x.
 ### CLI Usage
 
 The easiest way to start is the interactive wizard — it walks through
-every option and starts the CHR for you:
+every option and starts the CHR for you. It requires `qemu-img` and reports
+a missing tool before prompting or downloading:
 
 ```bash
 quickchr setup
@@ -201,6 +196,7 @@ reports a forced power cut if the guest does not stop within the grace budget.
 | `--install-all-packages` | Install all packages from `all_packages.zip` | |
 | `--add-user <user:pass>` | Create a user after boot | |
 | `--disable-admin` | Disable the default admin account | |
+| `--secure-login` | Create a managed login; use `--disable-admin` to disable admin | |
 | `--no-secure-login` | Keep admin with no password (skip managed account creation) | |
 | `--add-network <spec>` | Add a network NIC (repeatable). Specs: `user`, `shared`, `bridged:<iface>`, `socket::<name>`, `tap:<iface>`. Default: single user NIC. | |
 | `--no-network` | Start with no NICs (headless) | |
@@ -260,7 +256,8 @@ In **foreground** mode, your terminal becomes the CHR serial console. Use these
 
 ### Disk Support
 
-- The CHR boot image starts as raw. Using `--boot-size` converts it to qcow2 and resizes it before first boot.
+- CLI and wizard boot disks default to qcow2, converted from the raw MikroTik image using `qemu-img`. Library callers default to raw unless `bootSize` implies qcow2.
+- `--boot-size` resizes qcow2 before first boot; explicitly combining raw with a boot size is refused.
 - Extra disks from `--add-disk` are always created as blank qcow2 images.
 - `quickchr clean <name>` removes any resized boot disk and extra disks, then recreates them from the saved machine config.
 - `quickchr disk <name>` shows the stored disk layout. If `qemu-img` is installed, it also shows virtual and actual sizes.

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@tikoci/quickchr",
-  "version": "0.5.1",
+  "version": "0.5.2",
   "description": "CLI and library to download, launch, and manage MikroTik CHR virtual machines via QEMU",
   "module": "src/index.ts",
   "main": "src/index.ts",
@@ -15,6 +15,7 @@
     }
   },
   "files": [
+    ".bun-version",
     "src",
     "README.md",
     "DESIGN.md",

package/src/cli/index.ts

@@ -3233,7 +3233,7 @@ options still work on older versions when the required host tools are installed.
 ${ROUTEROS6_HELP}
 
 Options:
-  --name <name>         Instance name (required)
+  --name <name>         Instance name (auto-generated if omitted)
   --version <ver>       RouterOS version (e.g., 7.22.1)
   --channel <ch>        Channel: stable, long-term, testing, development
   --arch <arch>         Architecture: arm64, x86, auto (default: host native)
@@ -3257,6 +3257,7 @@ Options:
   --install-all-packages  Install all packages on first boot
   --add-user <u:p>      Create user on first boot (name:password)
   --disable-admin       Disable the default admin account on first boot
+  --secure-login        Create a managed login; use --disable-admin to disable admin
   --no-secure-login     Keep admin with no password (skip managed account)
   --port-base <port>    Starting port number (default: auto-allocated from 9100)
   --no-winbox           Exclude WinBox port mapping
@@ -3319,7 +3320,7 @@ ${CENTRS_SEE_ALSO}`);
 		case "start":
 			console.log(`quickchr start [<name>] [options]
 
-  <name>              Restart an existing stopped machine by name.
+  <name>              Restart a stopped machine; an unknown name creates a fresh machine.
                       Omit to see a list of stopped machines.
 
 Creation flags below apply when using 'start' to create a new machine in one step.
@@ -3367,6 +3368,7 @@ Options:
                         btest:9200-9210:2000-2010/udp.
   --add-user <u:p>      Create user with name:password
   --disable-admin       Disable the default admin account
+  --secure-login        Create a managed login; use --disable-admin to disable admin
   --no-secure-login     Keep admin with no password (skip managed account)
   --port-base <port>    Starting port number (default: auto-allocated from 9100)
   --no-winbox           Exclude WinBox port mapping

package/src/cli/wizard.ts

@@ -37,6 +37,9 @@ export function resolveUserChoiceOptions(
 
 /** Run the interactive wizard using @clack/prompts. */
 export async function runWizard(wizardOpts?: { firstRun?: boolean }): Promise<void> {
+	const { requireQemuImg } = await import("../lib/platform.ts");
+	requireQemuImg();
+
 	// Dynamic import — only loaded when wizard is actually used
 	const clack = await import("@clack/prompts");
 	const { QuickCHR } = await import("../lib/quickchr.ts");
@@ -148,75 +151,68 @@ export async function runWizard(wizardOpts?: { firstRun?: boolean }): Promise<vo
 	});
 	if (clack.isCancel(mem)) { clack.cancel("Cancelled."); process.exit(0); }
 
-	// 4b. Disk configuration — requires qemu-img; skip gracefully if absent
+	// 4b. Disk configuration — qemu-img was checked before any prompts
 	let bootSize: string | undefined;
 	let bootDiskFormat: "qcow2" | "raw" = "qcow2";
 	const extraDisks: string[] = [];
 
-	const { findQemuImg, getQemuInstallHint } = await import("../lib/platform.ts");
 	const { isValidDiskSize } = await import("../lib/disk.ts");
-	const qemuImg = findQemuImg();
+	const diskFormatChoice = await clack.select({
+		message: "Boot disk format:",
+		options: [
+			{ value: "qcow2", label: "qcow2 (recommended)", hint: "supports snapshots and resize" },
+			{ value: "raw", label: "raw", hint: "no resize support" },
+		],
+		initialValue: "qcow2",
+	});
+	if (clack.isCancel(diskFormatChoice)) { clack.cancel("Cancelled."); process.exit(0); }
+	bootDiskFormat = diskFormatChoice as "qcow2" | "raw";
 
-	if (!qemuImg) {
-		clack.log.warn(`Disk features (boot resize, extra disks) require qemu-img. Run 'quickchr doctor' to confirm setup. ${getQemuInstallHint()}`);
-	} else {
-		const diskFormatChoice = await clack.select({
-			message: "Boot disk format:",
-			options: [
-				{ value: "qcow2", label: "qcow2 (recommended)", hint: "supports snapshots and resize" },
-				{ value: "raw", label: "raw", hint: "no resize support" },
-			],
-			initialValue: "qcow2",
+	if (bootDiskFormat === "qcow2") {
+		const wantBootResize = await clack.confirm({
+			message: "Resize the boot disk? (default is ~128 MB)",
+			initialValue: false,
 		});
-		if (clack.isCancel(diskFormatChoice)) { clack.cancel("Cancelled."); process.exit(0); }
-		bootDiskFormat = diskFormatChoice as "qcow2" | "raw";
-
-		if (bootDiskFormat === "qcow2") {
-			const wantBootResize = await clack.confirm({
-				message: "Resize the boot disk? (default is ~128 MB)",
-				initialValue: false,
+		if (clack.isCancel(wantBootResize)) { clack.cancel("Cancelled."); process.exit(0); }
+
+		if (wantBootResize) {
+			const size = await clack.text({
+				message: "Boot disk size (e.g., 512M, 1G, 2G):",
+				validate: (v) => {
+					if (!isValidDiskSize(v)) return "Size like 512M, 1G, or 2048";
+				},
 			});
-			if (clack.isCancel(wantBootResize)) { clack.cancel("Cancelled."); process.exit(0); }
-
-			if (wantBootResize) {
-				const size = await clack.text({
-					message: "Boot disk size (e.g., 512M, 1G, 2G):",
-					validate: (v) => {
-						if (!isValidDiskSize(v)) return "Size like 512M, 1G, or 2048";
-					},
-				});
-				if (clack.isCancel(size)) { clack.cancel("Cancelled."); process.exit(0); }
-				bootSize = size.trim();
-			}
-		} else {
-			clack.log.info("Raw boot disk selected — boot resize is disabled.");
+			if (clack.isCancel(size)) { clack.cancel("Cancelled."); process.exit(0); }
+			bootSize = size.trim();
 		}
+	} else {
+		clack.log.info("Raw boot disk selected — boot resize is disabled.");
+	}
 
-		const wantExtraDisks = await clack.confirm({
-			message: "Add extra blank disks?",
-			initialValue: false,
-		});
-		if (clack.isCancel(wantExtraDisks)) { clack.cancel("Cancelled."); process.exit(0); }
-
-		if (wantExtraDisks) {
-			let addMore = true;
-			while (addMore) {
-				const diskSize = await clack.text({
-					message: `Extra disk ${extraDisks.length + 1} size (e.g., 64M, 512M, 1G):`,
-					validate: (v) => {
-						if (!isValidDiskSize(v)) return "Size like 64M, 512M, or 1G";
-					},
-				});
-				if (clack.isCancel(diskSize)) { clack.cancel("Cancelled."); process.exit(0); }
-				extraDisks.push(diskSize.trim());
+	const wantExtraDisks = await clack.confirm({
+		message: "Add extra blank disks?",
+		initialValue: false,
+	});
+	if (clack.isCancel(wantExtraDisks)) { clack.cancel("Cancelled."); process.exit(0); }
+
+	if (wantExtraDisks) {
+		let addMore = true;
+		while (addMore) {
+			const diskSize = await clack.text({
+				message: `Extra disk ${extraDisks.length + 1} size (e.g., 64M, 512M, 1G):`,
+				validate: (v) => {
+					if (!isValidDiskSize(v)) return "Size like 64M, 512M, or 1G";
+				},
+			});
+			if (clack.isCancel(diskSize)) { clack.cancel("Cancelled."); process.exit(0); }
+			extraDisks.push(diskSize.trim());
 
-				const another = await clack.confirm({
-					message: "Add another disk?",
-					initialValue: false,
-				});
-				if (clack.isCancel(another)) { clack.cancel("Cancelled."); process.exit(0); }
-				addMore = another;
-			}
+			const another = await clack.confirm({
+				message: "Add another disk?",
+				initialValue: false,
+			});
+			if (clack.isCancel(another)) { clack.cancel("Cancelled."); process.exit(0); }
+			addMore = another;
 		}
 	}
 

package/src/lib/platform.ts

@@ -3,7 +3,7 @@
  */
 
 import { existsSync, readdirSync, statSync } from "node:fs";
-import type { AccelMode, EfiFirmwarePaths, HostInterface, PackageManager, PlatformInfo, SocketVmnetInfo } from "./types.ts";
+import type { AccelMode, EfiFirmwarePaths, HostInterface, PackageManager, PlatformInfo, SocketVmnetInfo, DoctorCheck } from "./types.ts";
 import { QuickCHRError as QError, parseAccelMode } from "./types.ts";
 // settings-file.ts, not settings.ts: the latter's graph (cache → state → network
 // → platform) is a cycle that would load eagerly on every CLI start.
@@ -590,3 +590,15 @@ export function resolveInterfaceAlias(
 		`No interface found for alias '${alias}' — run 'quickchr doctor' to see available interfaces`,
 	);
 }
+
+/** Compare the running Bun against the same pin CI installs. */
+export async function bunRuntimeCheck(version = Bun.version): Promise<DoctorCheck> {
+	const pin = (await Bun.file(new URL("../../.bun-version", import.meta.url)).text()).trim();
+	// Runtimes predating the Semver API are also older than the tested pin.
+	const older = typeof Bun.semver?.order !== "function" || Bun.semver.order(version, pin) < 0;
+	return {
+		label: "Bun runtime",
+		status: older ? "warn" : "ok",
+		detail: `bun ${version}; tested with Bun ${pin}${older ? ` — upgrade to ${pin} or newer` : ""}`,
+	};
+}

package/src/lib/quickchr.ts

@@ -30,7 +30,7 @@ import type {
 import { QuickCHRError, ARCHES, CHANNELS, SERVICE_IDS, QUICKCHR_DESCRIPTOR_VERSION, HOST_GATEWAY_IP, PORTS_PER_BLOCK } from "./types.ts";
 import { assertValidResourceName, assertPathSafeName, shellQuote } from "./names.ts";
 import packageJson from "../../package.json";
-import { detectPlatform, requireQemu, requireFirmware, getQemuVersion, getQemuInstallHint, isCrossArchEmulation, accelTimeoutFactor, detectAccel, accelNote, resolveAccelOverrideWithSource, accelSourceLabel, findQemuImg, qgaKvmWarning, detectSocketVmnet, isSocketVmnetDaemonRunning, findCommandOnPath } from "./platform.ts";
+import { bunRuntimeCheck, detectPlatform, requireQemu, requireFirmware, getQemuVersion, getQemuInstallHint, isCrossArchEmulation, accelTimeoutFactor, detectAccel, accelNote, resolveAccelOverrideWithSource, accelSourceLabel, findQemuImg, qgaKvmWarning, detectSocketVmnet, isSocketVmnetDaemonRunning, findCommandOnPath } from "./platform.ts";
 import {
 	resolveVersion,
 	isValidVersion,
@@ -2997,12 +2997,7 @@ export class QuickCHR {
 	static async doctor(): Promise<DoctorResult> {
 		const checks: DoctorResult["checks"] = [];
 
-		// Bun version
-		checks.push({
-			label: "Bun runtime",
-			status: "ok",
-			detail: `bun ${Bun.version}`,
-		});
+		checks.push(await bunRuntimeCheck());
 
 		// QEMU for each arch
 		for (const arch of ARCHES) {
@@ -3125,7 +3120,7 @@ export class QuickCHR {
 			});
 		}
 
-		// qemu-img (optional, for disk resize and extra disks)
+		// qemu-img (default qcow2 creation and disk features)
 		const qemuImgPath = findQemuImg();
 		if (qemuImgPath) {
 			checks.push({
@@ -3137,7 +3132,7 @@ export class QuickCHR {
 			checks.push({
 				label: "qemu-img",
 				status: "warn",
-				detail: `not found — required for --boot-size and --add-disk (${getQemuInstallHint()})`,
+				detail: `not found — required for default qcow2 creation, setup, --boot-size and --add-disk (${getQemuInstallHint()})`,
 			});
 		}