@things-factory/figure-ui 10.1.84 → 10.1.86

package/dist-client/modeller/section-controls.js

@@ -1,15 +1,24 @@
+import { FIGURE_SECTION_PLANE, checkFigureSection, figureExtrusionFeaturesOf } from '@hatiolab/figure-model';
+/** The face each side of a section is, and each end of a push: a push's start is its low side. */
+export const SIDE_FACE = { 'x-': 'left', 'x+': 'right', 'y-': 'bottom', 'y+': 'top', 'z-': 'back', 'z+': 'front' };
+export const END_FACE = (axis, end) => SIDE_FACE[`${axis}${end === 'start' ? '-' : '+'}`];
 /** The one value every entry holds, or undefined when they differ (or there are none). */
 export const sameOf = (values) => values.length && values.every(v => v !== undefined && Math.abs(v - values[0]) < 1e-6) ? values[0] : undefined;
 export const mm = (value) => Math.round(value * 1000) / 1000;
+/** The four sides of a push's section, in the kernel's order: the first plane axis low and high, then the second. */
+export const sidesOf = (axis) => FIGURE_SECTION_PLANE[axis].flatMap(a => [`${a}-`, `${a}+`]);
+/** The section's widths across, one per plane axis: a rectangle's sides, an ellipse's diameters. */
+function acrossOf(e) {
+    const s = e.section;
+    if (s.kind === 'rectangle')
+        return FIGURE_SECTION_PLANE[e.axis].map(a => s.size[a]);
+    if (s.kind === 'ellipse')
+        return FIGURE_SECTION_PLANE[e.axis].map(a => 2 * s.radius[a]);
+    return [];
+}
 /** The wall a new inside starts with: a tenth of the section's narrower side, at least 1 mm. */
 export function defaultWallOf(shape) {
-    const section = shape.extrusion.section;
-    const across = section.kind === 'rectangle'
-        ? Object.values(section.size)
-        : section.kind === 'ellipse'
-            ? Object.values(section.radius).map(r => 2 * r)
-            : [];
-    return Math.max(1, Math.round(Math.min(...across) / 10));
+    return Math.max(1, Math.round(Math.min(...acrossOf(shape.extrusion)) / 10));
 }
 /**
  * The inside as the panel asks for it: the part's own, with one thing changed. A part with none yet gets a default
@@ -24,4 +33,59 @@ export function cavityRequestOf(shape, patch = {}) {
         ...patch
     };
 }
+/** The most a rectangle's corners can reach: half its narrower side (the kernel's CORNER_TOO_LARGE says where). */
+export function cornerLimitOf(shape) {
+    const e = shape.extrusion;
+    if (e?.section.kind !== 'rectangle')
+        return undefined;
+    const [u, v] = FIGURE_SECTION_PLANE[e.axis];
+    const far = 2 * Math.max(...acrossOf(e));
+    const issues = checkFigureSection({ kind: 'rectangle', size: e.section.size, corner: { [u]: far, [v]: far } }, e.axis);
+    const maxes = issues.flatMap(i => (i.code === 'CORNER_TOO_LARGE' ? [i.max] : []));
+    return maxes.length ? Math.min(...maxes) : undefined;
+}
+/** Whether a corner radius can be taken; if not, the most it can be. */
+export function cornerRefusalOf(shape, radius) {
+    const e = shape.extrusion;
+    if (e?.section.kind !== 'rectangle' || !(radius > 0))
+        return null;
+    const [u, v] = FIGURE_SECTION_PLANE[e.axis];
+    const issues = checkFigureSection({ kind: 'rectangle', size: e.section.size, corner: { [u]: radius, [v]: radius } }, e.axis);
+    return issues.some(i => i.code === 'CORNER_TOO_LARGE') ? { max: cornerLimitOf(shape) } : null;
+}
+/** One side's wall, the others kept: it must leave room inside, so under the width across it less the opposite wall. */
+export function sideWallLimitOf(shape, wall, side) {
+    const e = shape.extrusion;
+    const axis = side[0];
+    const across = acrossOf(e)[FIGURE_SECTION_PLANE[e.axis].indexOf(axis)];
+    return across - (wall[`${axis}${side[1] === '-' ? '+' : '-'}`] ?? 0);
+}
+/** A wall must leave room inside: under half the narrower width the section has. */
+export const wallLimitOf = (shape) => Math.min(...acrossOf(shape.extrusion)) / 2;
+/** Whether an inside can be taken, asked of the kernel; if not, what to change and the most it can be. */
+export function cavityRefusalOf(shape, request) {
+    const e = shape.extrusion;
+    const sides = sidesOf(e.axis);
+    const wall = typeof request.wall === 'number' ? Object.fromEntries(sides.map(s => [s, request.wall])) : request.wall;
+    const made = figureExtrusionFeaturesOf(e, [{ id: 'inside', wall: wall, start: request.start, end: request.end }]);
+    if (!('refused' in made))
+        return null;
+    const r = made.refused;
+    if (r.code === 'CAVITY' && r.refused === 'NO_ROOM_INSIDE')
+        return { code: 'wall-too-thick', max: mm(wallLimitOf(shape)) };
+    if (r.code === 'CAVITY_NO_LENGTH')
+        return { code: 'ends-too-thick', max: mm(e.end - e.start) };
+    return { code: 'not-positive' };
+}
+/** What the inside makes of the part (§3.3): open at both ends a pipe, at one a container, at neither a closed space. */
+export function cavityResultOf(cavity) {
+    const open = [cavity.start, cavity.end].filter(e => e === 'open').length;
+    return open === 2 ? 'pipe' : open === 1 ? 'container' : 'sealed';
+}
+/** How deep the inside is along the push: the length less the closed ends. */
+export function cavityDepthOf(shape) {
+    const e = shape.extrusion, c = shape.cavity;
+    const closed = (x) => (x === 'open' ? 0 : x.closed);
+    return mm(e.end - e.start - closed(c.start) - closed(c.end));
+}
 //# sourceMappingURL=section-controls.js.map

package/dist-client/modeller/section-controls.js.map

@@ -1 +1 @@
-{"version":3,"file":"section-controls.js","sourceRoot":"","sources":["../../client/modeller/section-controls.ts"],"names":[],"mappings":"AAEA,0FAA0F;AAC1F,MAAM,CAAC,MAAM,MAAM,GAAG,CAAC,MAAuC,EAAE,EAAE,CAChE,MAAM,CAAC,MAAM,IAAI,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,KAAK,SAAS,IAAI,IAAI,CAAC,GAAG,CAAC,CAAC,GAAG,MAAM,CAAC,CAAC,CAAE,CAAC,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,SAAS,CAAA;AAEhH,MAAM,CAAC,MAAM,EAAE,GAAG,CAAC,KAAa,EAAE,EAAE,CAAC,IAAI,CAAC,KAAK,CAAC,KAAK,GAAG,IAAI,CAAC,GAAG,IAAI,CAAA;AAEpE,gGAAgG;AAChG,MAAM,UAAU,aAAa,CAAC,KAA2B;IACvD,MAAM,OAAO,GAAG,KAAK,CAAC,SAAU,CAAC,OAAO,CAAA;IACxC,MAAM,MAAM,GACV,OAAO,CAAC,IAAI,KAAK,WAAW;QAC1B,CAAC,CAAC,MAAM,CAAC,MAAM,CAAC,OAAO,CAAC,IAAI,CAAC;QAC7B,CAAC,CAAC,OAAO,CAAC,IAAI,KAAK,SAAS;YAC1B,CAAC,CAAC,MAAM,CAAC,MAAM,CAAC,OAAO,CAAC,MAAM,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,CAAE,CAAC;YAChD,CAAC,CAAC,EAAE,CAAA;IACV,OAAO,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,KAAK,CAAC,IAAI,CAAC,GAAG,CAAC,GAAI,MAAmB,CAAC,GAAG,EAAE,CAAC,CAAC,CAAA;AACxE,CAAC;AAED;;;GAGG;AACH,MAAM,UAAU,eAAe,CAAC,KAA2B,EAAE,QAAsC,EAAE;IACnG,MAAM,MAAM,GAAG,KAAK,CAAC,MAAM,CAAA;IAC3B,OAAO;QACL,IAAI,EAAE,MAAM,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,MAAM,CAAC,MAAM,CAAC,MAAM,CAAC,IAAI,CAAC,CAAC,IAAI,EAAE,GAAG,MAAM,CAAC,IAAI,EAAE,CAAC,CAAC,CAAC,CAAC,aAAa,CAAC,KAAK,CAAC;QAChG,KAAK,EAAE,MAAM,EAAE,KAAK,IAAI,EAAE,MAAM,EAAE,aAAa,CAAC,KAAK,CAAC,EAAE;QACxD,GAAG,EAAE,MAAM,EAAE,GAAG,IAAI,MAAM;QAC1B,GAAG,KAAK;KACT,CAAA;AACH,CAAC","sourcesContent":["import type { FigureCavityRequest, FigureEvaluatedShape } from '@hatiolab/figure-model'\n\n/** The one value every entry holds, or undefined when they differ (or there are none). */\nexport const sameOf = (values: readonly (number | undefined)[]) =>\n  values.length && values.every(v => v !== undefined && Math.abs(v - values[0]!) < 1e-6) ? values[0] : undefined\n\nexport const mm = (value: number) => Math.round(value * 1000) / 1000\n\n/** The wall a new inside starts with: a tenth of the section's narrower side, at least 1 mm. */\nexport function defaultWallOf(shape: FigureEvaluatedShape): number {\n  const section = shape.extrusion!.section\n  const across =\n    section.kind === 'rectangle'\n      ? Object.values(section.size)\n      : section.kind === 'ellipse'\n        ? Object.values(section.radius).map(r => 2 * r!)\n        : []\n  return Math.max(1, Math.round(Math.min(...(across as number[])) / 10))\n}\n\n/**\n * The inside as the panel asks for it: the part's own, with one thing changed. A part with none yet gets a default\n * wall all round, a closed start as thick as the wall and an open end -- a tray standing on its floor.\n */\nexport function cavityRequestOf(shape: FigureEvaluatedShape, patch: Partial<FigureCavityRequest> = {}): FigureCavityRequest {\n  const cavity = shape.cavity\n  return {\n    wall: cavity ? (sameOf(Object.values(cavity.wall)) ?? { ...cavity.wall }) : defaultWallOf(shape),\n    start: cavity?.start ?? { closed: defaultWallOf(shape) },\n    end: cavity?.end ?? 'open',\n    ...patch\n  }\n}\n\n"]}
+{"version":3,"file":"section-controls.js","sourceRoot":"","sources":["../../client/modeller/section-controls.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,oBAAoB,EAAE,kBAAkB,EAAE,yBAAyB,EAAE,MAAM,wBAAwB,CAAA;AAa5G,kGAAkG;AAClG,MAAM,CAAC,MAAM,SAAS,GAA2B,EAAE,IAAI,EAAE,MAAM,EAAE,IAAI,EAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,EAAE,IAAI,EAAE,KAAK,EAAE,IAAI,EAAE,MAAM,EAAE,IAAI,EAAE,OAAO,EAAE,CAAA;AAC1I,MAAM,CAAC,MAAM,QAAQ,GAAG,CAAC,IAAU,EAAE,GAAQ,EAAE,EAAE,CAAC,SAAS,CAAC,GAAG,IAAI,GAAG,GAAG,KAAK,OAAO,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,EAAE,CAAE,CAAA;AAErG,0FAA0F;AAC1F,MAAM,CAAC,MAAM,MAAM,GAAG,CAAC,MAAuC,EAAE,EAAE,CAChE,MAAM,CAAC,MAAM,IAAI,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,KAAK,SAAS,IAAI,IAAI,CAAC,GAAG,CAAC,CAAC,GAAG,MAAM,CAAC,CAAC,CAAE,CAAC,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,SAAS,CAAA;AAEhH,MAAM,CAAC,MAAM,EAAE,GAAG,CAAC,KAAa,EAAE,EAAE,CAAC,IAAI,CAAC,KAAK,CAAC,KAAK,GAAG,IAAI,CAAC,GAAG,IAAI,CAAA;AAEpE,qHAAqH;AACrH,MAAM,CAAC,MAAM,OAAO,GAAG,CAAC,IAAU,EAAE,EAAE,CAAC,oBAAoB,CAAC,IAAI,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,CAAC,GAAG,EAAE,GAAG,CAAC,GAAG,CAAC,CAAC,CAAA;AAElG,oGAAoG;AACpG,SAAS,QAAQ,CAAC,CAAY;IAC5B,MAAM,CAAC,GAAG,CAAC,CAAC,OAAO,CAAA;IACnB,IAAI,CAAC,CAAC,IAAI,KAAK,WAAW;QAAE,OAAO,oBAAoB,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAE,CAAC,CAAA;IACpF,IAAI,CAAC,CAAC,IAAI,KAAK,SAAS;QAAE,OAAO,oBAAoB,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,MAAM,CAAC,CAAC,CAAE,CAAC,CAAA;IACxF,OAAO,EAAE,CAAA;AACX,CAAC;AAED,gGAAgG;AAChG,MAAM,UAAU,aAAa,CAAC,KAA2B;IACvD,OAAO,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,KAAK,CAAC,IAAI,CAAC,GAAG,CAAC,GAAG,QAAQ,CAAC,KAAK,CAAC,SAAU,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAA;AAC9E,CAAC;AAED;;;GAGG;AACH,MAAM,UAAU,eAAe,CAAC,KAA2B,EAAE,QAAsC,EAAE;IACnG,MAAM,MAAM,GAAG,KAAK,CAAC,MAAM,CAAA;IAC3B,OAAO;QACL,IAAI,EAAE,MAAM,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,MAAM,CAAC,MAAM,CAAC,MAAM,CAAC,IAAI,CAAC,CAAC,IAAI,EAAE,GAAG,MAAM,CAAC,IAAI,EAAE,CAAC,CAAC,CAAC,CAAC,aAAa,CAAC,KAAK,CAAC;QAChG,KAAK,EAAE,MAAM,EAAE,KAAK,IAAI,EAAE,MAAM,EAAE,aAAa,CAAC,KAAK,CAAC,EAAE;QACxD,GAAG,EAAE,MAAM,EAAE,GAAG,IAAI,MAAM;QAC1B,GAAG,KAAK;KACT,CAAA;AACH,CAAC;AAED,mHAAmH;AACnH,MAAM,UAAU,aAAa,CAAC,KAA2B;IACvD,MAAM,CAAC,GAAG,KAAK,CAAC,SAAS,CAAA;IACzB,IAAI,CAAC,EAAE,OAAO,CAAC,IAAI,KAAK,WAAW;QAAE,OAAO,SAAS,CAAA;IACrD,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,oBAAoB,CAAC,CAAC,CAAC,IAAI,CAAC,CAAA;IAC3C,MAAM,GAAG,GAAG,CAAC,GAAG,IAAI,CAAC,GAAG,CAAC,GAAG,QAAQ,CAAC,CAAC,CAAC,CAAC,CAAA;IACxC,MAAM,MAAM,GAAG,kBAAkB,CAAC,EAAE,IAAI,EAAE,WAAW,EAAE,IAAI,EAAE,CAAC,CAAC,OAAO,CAAC,IAAI,EAAE,MAAM,EAAE,EAAE,CAAC,CAAC,CAAC,EAAE,GAAG,EAAE,CAAC,CAAC,CAAC,EAAE,GAAG,EAAE,EAAE,EAAE,CAAC,CAAC,IAAI,CAAC,CAAA;IACtH,MAAM,KAAK,GAAG,MAAM,CAAC,OAAO,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,IAAI,KAAK,kBAAkB,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAA;IACjF,OAAO,KAAK,CAAC,MAAM,CAAC,CAAC,CAAC,IAAI,CAAC,GAAG,CAAC,GAAG,KAAK,CAAC,CAAC,CAAC,CAAC,SAAS,CAAA;AACtD,CAAC;AAED,wEAAwE;AACxE,MAAM,UAAU,eAAe,CAAC,KAA2B,EAAE,MAAc;IACzE,MAAM,CAAC,GAAG,KAAK,CAAC,SAAS,CAAA;IACzB,IAAI,CAAC,EAAE,OAAO,CAAC,IAAI,KAAK,WAAW,IAAI,CAAC,CAAC,MAAM,GAAG,CAAC,CAAC;QAAE,OAAO,IAAI,CAAA;IACjE,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,oBAAoB,CAAC,CAAC,CAAC,IAAI,CAAC,CAAA;IAC3C,MAAM,MAAM,GAAG,kBAAkB,CAAC,EAAE,IAAI,EAAE,WAAW,EAAE,IAAI,EAAE,CAAC,CAAC,OAAO,CAAC,IAAI,EAAE,MAAM,EAAE,EAAE,CAAC,CAAC,CAAC,EAAE,MAAM,EAAE,CAAC,CAAC,CAAC,EAAE,MAAM,EAAE,EAAE,EAAE,CAAC,CAAC,IAAI,CAAC,CAAA;IAC5H,OAAO,MAAM,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,IAAI,KAAK,kBAAkB,CAAC,CAAC,CAAC,CAAC,EAAE,GAAG,EAAE,aAAa,CAAC,KAAK,CAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAA;AAChG,CAAC;AAED,wHAAwH;AACxH,MAAM,UAAU,eAAe,CAAC,KAA2B,EAAE,IAA4B,EAAE,IAAY;IACrG,MAAM,CAAC,GAAG,KAAK,CAAC,SAAU,CAAA;IAC1B,MAAM,IAAI,GAAG,IAAI,CAAC,CAAC,CAAS,CAAA;IAC5B,MAAM,MAAM,GAAG,QAAQ,CAAC,CAAC,CAAC,CAAC,oBAAoB,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,OAAO,CAAC,IAAI,CAAC,CAAE,CAAA;IACvE,OAAO,MAAM,GAAG,CAAC,IAAI,CAAC,GAAG,IAAI,GAAG,IAAI,CAAC,CAAC,CAAC,KAAK,GAAG,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,CAAC,CAAA;AACtE,CAAC;AAED,oFAAoF;AACpF,MAAM,CAAC,MAAM,WAAW,GAAG,CAAC,KAA2B,EAAE,EAAE,CAAC,IAAI,CAAC,GAAG,CAAC,GAAG,QAAQ,CAAC,KAAK,CAAC,SAAU,CAAC,CAAC,GAAG,CAAC,CAAA;AAOvG,0GAA0G;AAC1G,MAAM,UAAU,eAAe,CAAC,KAA2B,EAAE,OAA4B;IACvF,MAAM,CAAC,GAAG,KAAK,CAAC,SAAU,CAAA;IAC1B,MAAM,KAAK,GAAG,OAAO,CAAC,CAAC,CAAC,IAAI,CAAC,CAAA;IAC7B,MAAM,IAAI,GAAG,OAAO,OAAO,CAAC,IAAI,KAAK,QAAQ,CAAC,CAAC,CAAC,MAAM,CAAC,WAAW,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,OAAO,CAAC,IAAc,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,OAAO,CAAC,IAAI,CAAA;IAC9H,MAAM,IAAI,GAAG,yBAAyB,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,EAAE,QAAQ,EAAE,IAAI,EAAE,IAA8B,EAAE,KAAK,EAAE,OAAO,CAAC,KAAK,EAAE,GAAG,EAAE,OAAO,CAAC,GAAG,EAAE,CAAC,CAAC,CAAA;IAC3I,IAAI,CAAC,CAAC,SAAS,IAAI,IAAI,CAAC;QAAE,OAAO,IAAI,CAAA;IACrC,MAAM,CAAC,GAAG,IAAI,CAAC,OAAO,CAAA;IACtB,IAAI,CAAC,CAAC,IAAI,KAAK,QAAQ,IAAI,CAAC,CAAC,OAAO,KAAK,gBAAgB;QAAE,OAAO,EAAE,IAAI,EAAE,gBAAgB,EAAE,GAAG,EAAE,EAAE,CAAC,WAAW,CAAC,KAAK,CAAC,CAAC,EAAE,CAAA;IACzH,IAAI,CAAC,CAAC,IAAI,KAAK,kBAAkB;QAAE,OAAO,EAAE,IAAI,EAAE,gBAAgB,EAAE,GAAG,EAAE,EAAE,CAAC,CAAC,CAAC,GAAG,GAAG,CAAC,CAAC,KAAK,CAAC,EAAE,CAAA;IAC9F,OAAO,EAAE,IAAI,EAAE,cAAc,EAAE,CAAA;AACjC,CAAC;AAED,yHAAyH;AACzH,MAAM,UAAU,cAAc,CAAC,MAAmD;IAChF,MAAM,IAAI,GAAG,CAAC,MAAM,CAAC,KAAK,EAAE,MAAM,CAAC,GAAG,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,KAAK,MAAM,CAAC,CAAC,MAAM,CAAA;IACxE,OAAO,IAAI,KAAK,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,IAAI,KAAK,CAAC,CAAC,CAAC,CAAC,WAAW,CAAC,CAAC,CAAC,QAAQ,CAAA;AAClE,CAAC;AAED,8EAA8E;AAC9E,MAAM,UAAU,aAAa,CAAC,KAA2B;IACvD,MAAM,CAAC,GAAG,KAAK,CAAC,SAAU,EACxB,CAAC,GAAG,KAAK,CAAC,MAAO,CAAA;IACnB,MAAM,MAAM,GAAG,CAAC,CAAiB,EAAE,EAAE,CAAC,CAAC,CAAC,KAAK,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,CAAA;IACnE,OAAO,EAAE,CAAC,CAAC,CAAC,GAAG,GAAG,CAAC,CAAC,KAAK,GAAG,MAAM,CAAC,CAAC,CAAC,KAAK,CAAC,GAAG,MAAM,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAA;AAC9D,CAAC","sourcesContent":["import { FIGURE_SECTION_PLANE, checkFigureSection, figureExtrusionFeaturesOf } from '@hatiolab/figure-model'\nimport type { FigureCavityRequest, FigureEvaluatedShape } from '@hatiolab/figure-model'\n\n/*\n * What the 단면 section of the properties tab reads and asks (ADR-0100 §3.3): a pushed part's corners and its inside.\n * Whether a value can be taken is asked of the kernel's own section checks -- the screen keeps no rule of its own -- and\n * the most it can take is said beside the field, so a refusal names the value to type rather than only that it failed.\n */\n\ntype Axis = 'x' | 'y' | 'z'\ntype End = 'start' | 'end'\ntype Extrusion = NonNullable<FigureEvaluatedShape['extrusion']>\n\n/** The face each side of a section is, and each end of a push: a push's start is its low side. */\nexport const SIDE_FACE: Record<string, string> = { 'x-': 'left', 'x+': 'right', 'y-': 'bottom', 'y+': 'top', 'z-': 'back', 'z+': 'front' }\nexport const END_FACE = (axis: Axis, end: End) => SIDE_FACE[`${axis}${end === 'start' ? '-' : '+'}`]!\n\n/** The one value every entry holds, or undefined when they differ (or there are none). */\nexport const sameOf = (values: readonly (number | undefined)[]) =>\n  values.length && values.every(v => v !== undefined && Math.abs(v - values[0]!) < 1e-6) ? values[0] : undefined\n\nexport const mm = (value: number) => Math.round(value * 1000) / 1000\n\n/** The four sides of a push's section, in the kernel's order: the first plane axis low and high, then the second. */\nexport const sidesOf = (axis: Axis) => FIGURE_SECTION_PLANE[axis].flatMap(a => [`${a}-`, `${a}+`])\n\n/** The section's widths across, one per plane axis: a rectangle's sides, an ellipse's diameters. */\nfunction acrossOf(e: Extrusion): number[] {\n  const s = e.section\n  if (s.kind === 'rectangle') return FIGURE_SECTION_PLANE[e.axis].map(a => s.size[a]!)\n  if (s.kind === 'ellipse') return FIGURE_SECTION_PLANE[e.axis].map(a => 2 * s.radius[a]!)\n  return []\n}\n\n/** The wall a new inside starts with: a tenth of the section's narrower side, at least 1 mm. */\nexport function defaultWallOf(shape: FigureEvaluatedShape): number {\n  return Math.max(1, Math.round(Math.min(...acrossOf(shape.extrusion!)) / 10))\n}\n\n/**\n * The inside as the panel asks for it: the part's own, with one thing changed. A part with none yet gets a default\n * wall all round, a closed start as thick as the wall and an open end -- a tray standing on its floor.\n */\nexport function cavityRequestOf(shape: FigureEvaluatedShape, patch: Partial<FigureCavityRequest> = {}): FigureCavityRequest {\n  const cavity = shape.cavity\n  return {\n    wall: cavity ? (sameOf(Object.values(cavity.wall)) ?? { ...cavity.wall }) : defaultWallOf(shape),\n    start: cavity?.start ?? { closed: defaultWallOf(shape) },\n    end: cavity?.end ?? 'open',\n    ...patch\n  }\n}\n\n/** The most a rectangle's corners can reach: half its narrower side (the kernel's CORNER_TOO_LARGE says where). */\nexport function cornerLimitOf(shape: FigureEvaluatedShape): number | undefined {\n  const e = shape.extrusion\n  if (e?.section.kind !== 'rectangle') return undefined\n  const [u, v] = FIGURE_SECTION_PLANE[e.axis]\n  const far = 2 * Math.max(...acrossOf(e))\n  const issues = checkFigureSection({ kind: 'rectangle', size: e.section.size, corner: { [u]: far, [v]: far } }, e.axis)\n  const maxes = issues.flatMap(i => (i.code === 'CORNER_TOO_LARGE' ? [i.max] : []))\n  return maxes.length ? Math.min(...maxes) : undefined\n}\n\n/** Whether a corner radius can be taken; if not, the most it can be. */\nexport function cornerRefusalOf(shape: FigureEvaluatedShape, radius: number): { max: number } | null {\n  const e = shape.extrusion\n  if (e?.section.kind !== 'rectangle' || !(radius > 0)) return null\n  const [u, v] = FIGURE_SECTION_PLANE[e.axis]\n  const issues = checkFigureSection({ kind: 'rectangle', size: e.section.size, corner: { [u]: radius, [v]: radius } }, e.axis)\n  return issues.some(i => i.code === 'CORNER_TOO_LARGE') ? { max: cornerLimitOf(shape)! } : null\n}\n\n/** One side's wall, the others kept: it must leave room inside, so under the width across it less the opposite wall. */\nexport function sideWallLimitOf(shape: FigureEvaluatedShape, wall: Record<string, number>, side: string): number {\n  const e = shape.extrusion!\n  const axis = side[0] as Axis\n  const across = acrossOf(e)[FIGURE_SECTION_PLANE[e.axis].indexOf(axis)]!\n  return across - (wall[`${axis}${side[1] === '-' ? '+' : '-'}`] ?? 0)\n}\n\n/** A wall must leave room inside: under half the narrower width the section has. */\nexport const wallLimitOf = (shape: FigureEvaluatedShape) => Math.min(...acrossOf(shape.extrusion!)) / 2\n\nexport type FigureCavityAsk =\n  | { code: 'wall-too-thick'; max: number }\n  | { code: 'ends-too-thick'; max: number }\n  | { code: 'not-positive' }\n\n/** Whether an inside can be taken, asked of the kernel; if not, what to change and the most it can be. */\nexport function cavityRefusalOf(shape: FigureEvaluatedShape, request: FigureCavityRequest): FigureCavityAsk | null {\n  const e = shape.extrusion!\n  const sides = sidesOf(e.axis)\n  const wall = typeof request.wall === 'number' ? Object.fromEntries(sides.map(s => [s, request.wall as number])) : request.wall\n  const made = figureExtrusionFeaturesOf(e, [{ id: 'inside', wall: wall as Record<string, number>, start: request.start, end: request.end }])\n  if (!('refused' in made)) return null\n  const r = made.refused\n  if (r.code === 'CAVITY' && r.refused === 'NO_ROOM_INSIDE') return { code: 'wall-too-thick', max: mm(wallLimitOf(shape)) }\n  if (r.code === 'CAVITY_NO_LENGTH') return { code: 'ends-too-thick', max: mm(e.end - e.start) }\n  return { code: 'not-positive' }\n}\n\n/** What the inside makes of the part (§3.3): open at both ends a pipe, at one a container, at neither a closed space. */\nexport function cavityResultOf(cavity: NonNullable<FigureEvaluatedShape['cavity']>): 'pipe' | 'container' | 'sealed' {\n  const open = [cavity.start, cavity.end].filter(e => e === 'open').length\n  return open === 2 ? 'pipe' : open === 1 ? 'container' : 'sealed'\n}\n\n/** How deep the inside is along the push: the length less the closed ends. */\nexport function cavityDepthOf(shape: FigureEvaluatedShape): number {\n  const e = shape.extrusion!,\n    c = shape.cavity!\n  const closed = (x: typeof c.start) => (x === 'open' ? 0 : x.closed)\n  return mm(e.end - e.start - closed(c.start) - closed(c.end))\n}\n"]}

package/dist-client/modeller/section-drawing.d.ts

@@ -0,0 +1,33 @@
+import type { FigureSectionIssue, FigureSectionPoint } from '@hatiolab/figure-model';
+type Axis = 'x' | 'y' | 'z';
+export type Points = readonly FigureSectionPoint[];
+/** The number a point is shown by: its name's number. */
+export declare const pointLabel: (id: string) => string;
+/** The next point's name: one past the highest number the loop has, so a new point never takes a gap's number. */
+export declare function nextPointId(points: Points): string;
+/** A point in the middle of the side from `from` to the point after it, whole millimetres; the new point's id with it. */
+export declare function insertAfter(points: Points, from: string, axis: Axis): {
+    points: FigureSectionPoint[];
+    id: string;
+};
+/** The points less one, or why not: a section is three points or more. */
+export declare function removePoint(points: Points, id: string): FigureSectionPoint[] | {
+    refused: 'too-few';
+};
+export declare function movePoint(points: Points, id: string, at: Partial<Record<Axis, number>>): FigureSectionPoint[];
+/** What is wrong with the points, by the kernel's own check. */
+export declare const issuesOf: (points: Points, axis: Axis) => FigureSectionIssue[];
+/** An issue as the words that say it: an i18n key and its values. */
+export declare function issueWords(issue: FigureSectionIssue, points: Points, axis: Axis): {
+    key: string;
+    params: Record<string, string>;
+};
+/** Every side and point an issue names, to mark on the drawing -- by more than colour: the list says them too. */
+export declare function markedBy(issues: readonly FigureSectionIssue[]): {
+    sides: Set<string>;
+    points: Set<string>;
+};
+/** How far the drawing reaches from the origin: the points' farthest coordinate with room around, in 50 mm steps. */
+export declare function extentOf(points: Points, axis: Axis): number;
+export declare const POINT_LIMIT = 256;
+export {};

package/dist-client/modeller/section-drawing.js

@@ -0,0 +1,82 @@
+import { FIGURE_SECTION_PLANE, FIGURE_SECTION_POINT_LIMIT, checkFigureSection, figureSectionSidesOf } from '@hatiolab/figure-model';
+/** The number a point is shown by: its name's number. */
+export const pointLabel = (id) => /^p(\d+)$/.exec(id)?.[1] ?? id;
+/** The next point's name: one past the highest number the loop has, so a new point never takes a gap's number. */
+export function nextPointId(points) {
+    return `p${Math.max(0, ...points.map(p => Number(/^p(\d+)$/.exec(p.id)?.[1] ?? 0))) + 1}`;
+}
+/** A point in the middle of the side from `from` to the point after it, whole millimetres; the new point's id with it. */
+export function insertAfter(points, from, axis) {
+    const [u, v] = FIGURE_SECTION_PLANE[axis];
+    const i = points.findIndex(p => p.id === from);
+    const a = points[i], b = points[(i + 1) % points.length];
+    const id = nextPointId(points);
+    const mid = { id, [u]: Math.round((a[u] + b[u]) / 2), [v]: Math.round((a[v] + b[v]) / 2) };
+    return { points: [...points.slice(0, i + 1), mid, ...points.slice(i + 1)], id };
+}
+/** The points less one, or why not: a section is three points or more. */
+export function removePoint(points, id) {
+    if (points.length <= 3)
+        return { refused: 'too-few' };
+    return points.filter(p => p.id !== id);
+}
+export function movePoint(points, id, at) {
+    return points.map(p => (p.id === id ? { ...p, ...at } : p));
+}
+/** What is wrong with the points, by the kernel's own check. */
+export const issuesOf = (points, axis) => checkFigureSection({ kind: 'polygon', points: [...points] }, axis);
+/** A side said in the loop's order, 3–4 not 4–3: its id is the pair in name order, which a person never sees. */
+function sideLabel(points, axis, side) {
+    const s = figureSectionSidesOf({ kind: 'polygon', points: [...points] }, axis).find(x => x.id === side);
+    const [a, b] = s?.from ? [s.from, s.to] : side.split('~');
+    return `${pointLabel(a)}–${pointLabel(b)}`;
+}
+/** An issue as the words that say it: an i18n key and its values. */
+export function issueWords(issue, points, axis) {
+    const line = (s) => sideLabel(points, axis, s);
+    switch (issue.code) {
+        case 'SIDES_CROSS':
+            return { key: 'figure.text.section-issue-cross', params: { a: line(issue.sides[0]), b: line(issue.sides[1]) } };
+        case 'SIDES_TOUCH':
+            return { key: 'figure.text.section-issue-touch', params: { a: line(issue.sides[0]), b: line(issue.sides[1]) } };
+        case 'SIDES_FOLD':
+            return { key: 'figure.text.section-issue-fold', params: { a: line(issue.sides[0]), b: line(issue.sides[1]) } };
+        case 'ZERO_LENGTH_SIDE':
+            return { key: 'figure.text.section-issue-zero-length', params: { a: line(issue.side) } };
+        case 'ZERO_AREA':
+            return { key: 'figure.text.section-issue-zero-area', params: {} };
+        case 'TOO_FEW_POINTS':
+            return { key: 'figure.text.section-issue-too-few', params: {} };
+        case 'TOO_MANY_POINTS':
+            return { key: 'figure.text.section-issue-too-many', params: { limit: String(issue.limit) } };
+        default:
+            return { key: 'figure.text.section-issue-number', params: {} };
+    }
+}
+/** Every side and point an issue names, to mark on the drawing -- by more than colour: the list says them too. */
+export function markedBy(issues) {
+    const sides = new Set(), points = new Set();
+    for (const i of issues) {
+        if ('sides' in i)
+            for (const s of i.sides)
+                sides.add(s);
+        if ('side' in i)
+            sides.add(i.side);
+        if ('point' in i)
+            points.add(i.point);
+        if ('at' in i)
+            points.add(String(i.at).split('.')[0]);
+    }
+    for (const s of sides)
+        for (const p of s.split('~'))
+            points.add(p);
+    return { sides, points };
+}
+/** How far the drawing reaches from the origin: the points' farthest coordinate with room around, in 50 mm steps. */
+export function extentOf(points, axis) {
+    const [u, v] = FIGURE_SECTION_PLANE[axis];
+    const far = Math.max(1, ...points.flatMap(p => [Math.abs(p[u] ?? 0), Math.abs(p[v] ?? 0)]));
+    return Math.ceil((far * 1.4 + 40) / 50) * 50;
+}
+export const POINT_LIMIT = FIGURE_SECTION_POINT_LIMIT;
+//# sourceMappingURL=section-drawing.js.map

package/dist-client/modeller/section-drawing.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"section-drawing.js","sourceRoot":"","sources":["../../client/modeller/section-drawing.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,oBAAoB,EAAE,0BAA0B,EAAE,kBAAkB,EAAE,oBAAoB,EAAE,MAAM,wBAAwB,CAAA;AAanI,yDAAyD;AACzD,MAAM,CAAC,MAAM,UAAU,GAAG,CAAC,EAAU,EAAE,EAAE,CAAC,UAAU,CAAC,IAAI,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,IAAI,EAAE,CAAA;AAExE,kHAAkH;AAClH,MAAM,UAAU,WAAW,CAAC,MAAc;IACxC,OAAO,IAAI,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,GAAG,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,MAAM,CAAC,UAAU,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,CAAA;AAC3F,CAAC;AAED,0HAA0H;AAC1H,MAAM,UAAU,WAAW,CAAC,MAAc,EAAE,IAAY,EAAE,IAAU;IAClE,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,oBAAoB,CAAC,IAAI,CAAC,CAAA;IACzC,MAAM,CAAC,GAAG,MAAM,CAAC,SAAS,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,KAAK,IAAI,CAAC,CAAA;IAC9C,MAAM,CAAC,GAAG,MAAM,CAAC,CAAC,CAAE,EAClB,CAAC,GAAG,MAAM,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,MAAM,CAAC,MAAM,CAAE,CAAA;IACtC,MAAM,EAAE,GAAG,WAAW,CAAC,MAAM,CAAC,CAAA;IAC9B,MAAM,GAAG,GAAG,EAAE,EAAE,EAAE,CAAC,CAAC,CAAC,EAAE,IAAI,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC,CAAE,GAAG,CAAC,CAAC,CAAC,CAAE,CAAC,GAAG,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,IAAI,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC,CAAE,GAAG,CAAC,CAAC,CAAC,CAAE,CAAC,GAAG,CAAC,CAAC,EAAwB,CAAA;IACpH,OAAO,EAAE,MAAM,EAAE,CAAC,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC,EAAE,CAAC,GAAG,CAAC,CAAC,EAAE,GAAG,EAAE,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,EAAE,CAAA;AACjF,CAAC;AAED,0EAA0E;AAC1E,MAAM,UAAU,WAAW,CAAC,MAAc,EAAE,EAAU;IACpD,IAAI,MAAM,CAAC,MAAM,IAAI,CAAC;QAAE,OAAO,EAAE,OAAO,EAAE,SAAS,EAAE,CAAA;IACrD,OAAO,MAAM,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,KAAK,EAAE,CAAC,CAAA;AACxC,CAAC;AAED,MAAM,UAAU,SAAS,CAAC,MAAc,EAAE,EAAU,EAAE,EAAiC;IACrF,OAAO,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,EAAE,KAAK,EAAE,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,EAAE,GAAG,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAA;AAC7D,CAAC;AAED,gEAAgE;AAChE,MAAM,CAAC,MAAM,QAAQ,GAAG,CAAC,MAAc,EAAE,IAAU,EAAE,EAAE,CAAC,kBAAkB,CAAC,EAAE,IAAI,EAAE,SAAS,EAAE,MAAM,EAAE,CAAC,GAAG,MAAM,CAAC,EAAE,EAAE,IAAI,CAAC,CAAA;AAE1H,iHAAiH;AACjH,SAAS,SAAS,CAAC,MAAc,EAAE,IAAU,EAAE,IAAY;IACzD,MAAM,CAAC,GAAG,oBAAoB,CAAC,EAAE,IAAI,EAAE,SAAS,EAAE,MAAM,EAAE,CAAC,GAAG,MAAM,CAAC,EAAE,EAAE,IAAI,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,KAAK,IAAI,CAAC,CAAA;IACvG,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,CAAC,EAAE,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC,CAAC,EAAG,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,KAAK,CAAC,GAAG,CAAC,CAAA;IAC1D,OAAO,GAAG,UAAU,CAAC,CAAE,CAAC,IAAI,UAAU,CAAC,CAAE,CAAC,EAAE,CAAA;AAC9C,CAAC;AAED,qEAAqE;AACrE,MAAM,UAAU,UAAU,CAAC,KAAyB,EAAE,MAAc,EAAE,IAAU;IAC9E,MAAM,IAAI,GAAG,CAAC,CAAS,EAAE,EAAE,CAAC,SAAS,CAAC,MAAM,EAAE,IAAI,EAAE,CAAC,CAAC,CAAA;IACtD,QAAQ,KAAK,CAAC,IAAI,EAAE,CAAC;QACnB,KAAK,aAAa;YAChB,OAAO,EAAE,GAAG,EAAE,iCAAiC,EAAE,MAAM,EAAE,EAAE,CAAC,EAAE,IAAI,CAAC,KAAK,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,IAAI,CAAC,KAAK,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,EAAE,CAAA;QACjH,KAAK,aAAa;YAChB,OAAO,EAAE,GAAG,EAAE,iCAAiC,EAAE,MAAM,EAAE,EAAE,CAAC,EAAE,IAAI,CAAC,KAAK,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,IAAI,CAAC,KAAK,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,EAAE,CAAA;QACjH,KAAK,YAAY;YACf,OAAO,EAAE,GAAG,EAAE,gCAAgC,EAAE,MAAM,EAAE,EAAE,CAAC,EAAE,IAAI,CAAC,KAAK,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,IAAI,CAAC,KAAK,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,EAAE,CAAA;QAChH,KAAK,kBAAkB;YACrB,OAAO,EAAE,GAAG,EAAE,uCAAuC,EAAE,MAAM,EAAE,EAAE,CAAC,EAAE,IAAI,CAAC,KAAK,CAAC,IAAI,CAAC,EAAE,EAAE,CAAA;QAC1F,KAAK,WAAW;YACd,OAAO,EAAE,GAAG,EAAE,qCAAqC,EAAE,MAAM,EAAE,EAAE,EAAE,CAAA;QACnE,KAAK,gBAAgB;YACnB,OAAO,EAAE,GAAG,EAAE,mCAAmC,EAAE,MAAM,EAAE,EAAE,EAAE,CAAA;QACjE,KAAK,iBAAiB;YACpB,OAAO,EAAE,GAAG,EAAE,oCAAoC,EAAE,MAAM,EAAE,EAAE,KAAK,EAAE,MAAM,CAAC,KAAK,CAAC,KAAK,CAAC,EAAE,EAAE,CAAA;QAC9F;YACE,OAAO,EAAE,GAAG,EAAE,kCAAkC,EAAE,MAAM,EAAE,EAAE,EAAE,CAAA;IAClE,CAAC;AACH,CAAC;AAED,kHAAkH;AAClH,MAAM,UAAU,QAAQ,CAAC,MAAqC;IAC5D,MAAM,KAAK,GAAG,IAAI,GAAG,EAAU,EAC7B,MAAM,GAAG,IAAI,GAAG,EAAU,CAAA;IAC5B,KAAK,MAAM,CAAC,IAAI,MAAM,EAAE,CAAC;QACvB,IAAI,OAAO,IAAI,CAAC;YAAE,KAAK,MAAM,CAAC,IAAI,CAAC,CAAC,KAAK;gBAAE,KAAK,CAAC,GAAG,CAAC,CAAC,CAAC,CAAA;QACvD,IAAI,MAAM,IAAI,CAAC;YAAE,KAAK,CAAC,GAAG,CAAC,CAAC,CAAC,IAAI,CAAC,CAAA;QAClC,IAAI,OAAO,IAAI,CAAC;YAAE,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,KAAK,CAAC,CAAA;QACrC,IAAI,IAAI,IAAI,CAAC;YAAE,MAAM,CAAC,GAAG,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC,CAAC,CAAE,CAAC,CAAA;IACxD,CAAC;IACD,KAAK,MAAM,CAAC,IAAI,KAAK;QAAE,KAAK,MAAM,CAAC,IAAI,CAAC,CAAC,KAAK,CAAC,GAAG,CAAC;YAAE,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,CAAA;IAClE,OAAO,EAAE,KAAK,EAAE,MAAM,EAAE,CAAA;AAC1B,CAAC;AAED,qHAAqH;AACrH,MAAM,UAAU,QAAQ,CAAC,MAAc,EAAE,IAAU;IACjD,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,oBAAoB,CAAC,IAAI,CAAC,CAAA;IACzC,MAAM,GAAG,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,GAAG,MAAM,CAAC,OAAO,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,IAAI,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,EAAE,IAAI,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC,CAAA;IAC3F,OAAO,IAAI,CAAC,IAAI,CAAC,CAAC,GAAG,GAAG,GAAG,GAAG,EAAE,CAAC,GAAG,EAAE,CAAC,GAAG,EAAE,CAAA;AAC9C,CAAC;AAED,MAAM,CAAC,MAAM,WAAW,GAAG,0BAA0B,CAAA","sourcesContent":["import { FIGURE_SECTION_PLANE, FIGURE_SECTION_POINT_LIMIT, checkFigureSection, figureSectionSidesOf } from '@hatiolab/figure-model'\nimport type { FigureSectionIssue, FigureSectionPoint } from '@hatiolab/figure-model'\n\n/*\n * What the section editor does to a drawn section's points, and how it says what is wrong with them (ADR-0100 §3.2).\n * The points are the kernel's own (`{ id, x, z }` for a push along Y), their validity is the kernel's own check, and a\n * point's number on screen is its own name's number (Q9): p3 is 「3」 before and after any edit, and deleting it leaves\n * 1, 2 and 4.\n */\n\ntype Axis = 'x' | 'y' | 'z'\nexport type Points = readonly FigureSectionPoint[]\n\n/** The number a point is shown by: its name's number. */\nexport const pointLabel = (id: string) => /^p(\\d+)$/.exec(id)?.[1] ?? id\n\n/** The next point's name: one past the highest number the loop has, so a new point never takes a gap's number. */\nexport function nextPointId(points: Points): string {\n  return `p${Math.max(0, ...points.map(p => Number(/^p(\\d+)$/.exec(p.id)?.[1] ?? 0))) + 1}`\n}\n\n/** A point in the middle of the side from `from` to the point after it, whole millimetres; the new point's id with it. */\nexport function insertAfter(points: Points, from: string, axis: Axis): { points: FigureSectionPoint[]; id: string } {\n  const [u, v] = FIGURE_SECTION_PLANE[axis]\n  const i = points.findIndex(p => p.id === from)\n  const a = points[i]!,\n    b = points[(i + 1) % points.length]!\n  const id = nextPointId(points)\n  const mid = { id, [u]: Math.round((a[u]! + b[u]!) / 2), [v]: Math.round((a[v]! + b[v]!) / 2) } as FigureSectionPoint\n  return { points: [...points.slice(0, i + 1), mid, ...points.slice(i + 1)], id }\n}\n\n/** The points less one, or why not: a section is three points or more. */\nexport function removePoint(points: Points, id: string): FigureSectionPoint[] | { refused: 'too-few' } {\n  if (points.length <= 3) return { refused: 'too-few' }\n  return points.filter(p => p.id !== id)\n}\n\nexport function movePoint(points: Points, id: string, at: Partial<Record<Axis, number>>): FigureSectionPoint[] {\n  return points.map(p => (p.id === id ? { ...p, ...at } : p))\n}\n\n/** What is wrong with the points, by the kernel's own check. */\nexport const issuesOf = (points: Points, axis: Axis) => checkFigureSection({ kind: 'polygon', points: [...points] }, axis)\n\n/** A side said in the loop's order, 3–4 not 4–3: its id is the pair in name order, which a person never sees. */\nfunction sideLabel(points: Points, axis: Axis, side: string): string {\n  const s = figureSectionSidesOf({ kind: 'polygon', points: [...points] }, axis).find(x => x.id === side)\n  const [a, b] = s?.from ? [s.from, s.to!] : side.split('~')\n  return `${pointLabel(a!)}–${pointLabel(b!)}`\n}\n\n/** An issue as the words that say it: an i18n key and its values. */\nexport function issueWords(issue: FigureSectionIssue, points: Points, axis: Axis): { key: string; params: Record<string, string> } {\n  const line = (s: string) => sideLabel(points, axis, s)\n  switch (issue.code) {\n    case 'SIDES_CROSS':\n      return { key: 'figure.text.section-issue-cross', params: { a: line(issue.sides[0]), b: line(issue.sides[1]) } }\n    case 'SIDES_TOUCH':\n      return { key: 'figure.text.section-issue-touch', params: { a: line(issue.sides[0]), b: line(issue.sides[1]) } }\n    case 'SIDES_FOLD':\n      return { key: 'figure.text.section-issue-fold', params: { a: line(issue.sides[0]), b: line(issue.sides[1]) } }\n    case 'ZERO_LENGTH_SIDE':\n      return { key: 'figure.text.section-issue-zero-length', params: { a: line(issue.side) } }\n    case 'ZERO_AREA':\n      return { key: 'figure.text.section-issue-zero-area', params: {} }\n    case 'TOO_FEW_POINTS':\n      return { key: 'figure.text.section-issue-too-few', params: {} }\n    case 'TOO_MANY_POINTS':\n      return { key: 'figure.text.section-issue-too-many', params: { limit: String(issue.limit) } }\n    default:\n      return { key: 'figure.text.section-issue-number', params: {} }\n  }\n}\n\n/** Every side and point an issue names, to mark on the drawing -- by more than colour: the list says them too. */\nexport function markedBy(issues: readonly FigureSectionIssue[]): { sides: Set<string>; points: Set<string> } {\n  const sides = new Set<string>(),\n    points = new Set<string>()\n  for (const i of issues) {\n    if ('sides' in i) for (const s of i.sides) sides.add(s)\n    if ('side' in i) sides.add(i.side)\n    if ('point' in i) points.add(i.point)\n    if ('at' in i) points.add(String(i.at).split('.')[0]!)\n  }\n  for (const s of sides) for (const p of s.split('~')) points.add(p)\n  return { sides, points }\n}\n\n/** How far the drawing reaches from the origin: the points' farthest coordinate with room around, in 50 mm steps. */\nexport function extentOf(points: Points, axis: Axis): number {\n  const [u, v] = FIGURE_SECTION_PLANE[axis]\n  const far = Math.max(1, ...points.flatMap(p => [Math.abs(p[u] ?? 0), Math.abs(p[v] ?? 0)]))\n  return Math.ceil((far * 1.4 + 40) / 50) * 50\n}\n\nexport const POINT_LIMIT = FIGURE_SECTION_POINT_LIMIT\n"]}