@things-factory/figure-ui 10.1.83 → 10.1.85

package/dist-client/modeller/section-controls.d.ts

@@ -0,0 +1,44 @@
+import type { FigureCavityRequest, FigureEvaluatedShape } from '@hatiolab/figure-model';
+type Axis = 'x' | 'y' | 'z';
+type End = 'start' | 'end';
+/** The face each side of a section is, and each end of a push: a push's start is its low side. */
+export declare const SIDE_FACE: Record<string, string>;
+export declare const END_FACE: (axis: Axis, end: End) => string;
+/** The one value every entry holds, or undefined when they differ (or there are none). */
+export declare const sameOf: (values: readonly (number | undefined)[]) => number | undefined;
+export declare const mm: (value: number) => number;
+/** The four sides of a push's section, in the kernel's order: the first plane axis low and high, then the second. */
+export declare const sidesOf: (axis: Axis) => string[];
+/** The wall a new inside starts with: a tenth of the section's narrower side, at least 1 mm. */
+export declare function defaultWallOf(shape: FigureEvaluatedShape): number;
+/**
+ * The inside as the panel asks for it: the part's own, with one thing changed. A part with none yet gets a default
+ * wall all round, a closed start as thick as the wall and an open end -- a tray standing on its floor.
+ */
+export declare function cavityRequestOf(shape: FigureEvaluatedShape, patch?: Partial<FigureCavityRequest>): FigureCavityRequest;
+/** The most a rectangle's corners can reach: half its narrower side (the kernel's CORNER_TOO_LARGE says where). */
+export declare function cornerLimitOf(shape: FigureEvaluatedShape): number | undefined;
+/** Whether a corner radius can be taken; if not, the most it can be. */
+export declare function cornerRefusalOf(shape: FigureEvaluatedShape, radius: number): {
+    max: number;
+} | null;
+/** One side's wall, the others kept: it must leave room inside, so under the width across it less the opposite wall. */
+export declare function sideWallLimitOf(shape: FigureEvaluatedShape, wall: Record<string, number>, side: string): number;
+/** A wall must leave room inside: under half the narrower width the section has. */
+export declare const wallLimitOf: (shape: FigureEvaluatedShape) => number;
+export type FigureCavityAsk = {
+    code: 'wall-too-thick';
+    max: number;
+} | {
+    code: 'ends-too-thick';
+    max: number;
+} | {
+    code: 'not-positive';
+};
+/** Whether an inside can be taken, asked of the kernel; if not, what to change and the most it can be. */
+export declare function cavityRefusalOf(shape: FigureEvaluatedShape, request: FigureCavityRequest): FigureCavityAsk | null;
+/** What the inside makes of the part (§3.3): open at both ends a pipe, at one a container, at neither a closed space. */
+export declare function cavityResultOf(cavity: NonNullable<FigureEvaluatedShape['cavity']>): 'pipe' | 'container' | 'sealed';
+/** How deep the inside is along the push: the length less the closed ends. */
+export declare function cavityDepthOf(shape: FigureEvaluatedShape): number;
+export {};

package/dist-client/modeller/section-controls.js

@@ -0,0 +1,91 @@
+import { FIGURE_SECTION_PLANE, checkFigureSection, figureExtrusionFeaturesOf } from '@hatiolab/figure-model';
+/** The face each side of a section is, and each end of a push: a push's start is its low side. */
+export const SIDE_FACE = { 'x-': 'left', 'x+': 'right', 'y-': 'bottom', 'y+': 'top', 'z-': 'back', 'z+': 'front' };
+export const END_FACE = (axis, end) => SIDE_FACE[`${axis}${end === 'start' ? '-' : '+'}`];
+/** The one value every entry holds, or undefined when they differ (or there are none). */
+export const sameOf = (values) => values.length && values.every(v => v !== undefined && Math.abs(v - values[0]) < 1e-6) ? values[0] : undefined;
+export const mm = (value) => Math.round(value * 1000) / 1000;
+/** The four sides of a push's section, in the kernel's order: the first plane axis low and high, then the second. */
+export const sidesOf = (axis) => FIGURE_SECTION_PLANE[axis].flatMap(a => [`${a}-`, `${a}+`]);
+/** The section's widths across, one per plane axis: a rectangle's sides, an ellipse's diameters. */
+function acrossOf(e) {
+    const s = e.section;
+    if (s.kind === 'rectangle')
+        return FIGURE_SECTION_PLANE[e.axis].map(a => s.size[a]);
+    if (s.kind === 'ellipse')
+        return FIGURE_SECTION_PLANE[e.axis].map(a => 2 * s.radius[a]);
+    return [];
+}
+/** The wall a new inside starts with: a tenth of the section's narrower side, at least 1 mm. */
+export function defaultWallOf(shape) {
+    return Math.max(1, Math.round(Math.min(...acrossOf(shape.extrusion)) / 10));
+}
+/**
+ * The inside as the panel asks for it: the part's own, with one thing changed. A part with none yet gets a default
+ * wall all round, a closed start as thick as the wall and an open end -- a tray standing on its floor.
+ */
+export function cavityRequestOf(shape, patch = {}) {
+    const cavity = shape.cavity;
+    return {
+        wall: cavity ? (sameOf(Object.values(cavity.wall)) ?? { ...cavity.wall }) : defaultWallOf(shape),
+        start: cavity?.start ?? { closed: defaultWallOf(shape) },
+        end: cavity?.end ?? 'open',
+        ...patch
+    };
+}
+/** The most a rectangle's corners can reach: half its narrower side (the kernel's CORNER_TOO_LARGE says where). */
+export function cornerLimitOf(shape) {
+    const e = shape.extrusion;
+    if (e?.section.kind !== 'rectangle')
+        return undefined;
+    const [u, v] = FIGURE_SECTION_PLANE[e.axis];
+    const far = 2 * Math.max(...acrossOf(e));
+    const issues = checkFigureSection({ kind: 'rectangle', size: e.section.size, corner: { [u]: far, [v]: far } }, e.axis);
+    const maxes = issues.flatMap(i => (i.code === 'CORNER_TOO_LARGE' ? [i.max] : []));
+    return maxes.length ? Math.min(...maxes) : undefined;
+}
+/** Whether a corner radius can be taken; if not, the most it can be. */
+export function cornerRefusalOf(shape, radius) {
+    const e = shape.extrusion;
+    if (e?.section.kind !== 'rectangle' || !(radius > 0))
+        return null;
+    const [u, v] = FIGURE_SECTION_PLANE[e.axis];
+    const issues = checkFigureSection({ kind: 'rectangle', size: e.section.size, corner: { [u]: radius, [v]: radius } }, e.axis);
+    return issues.some(i => i.code === 'CORNER_TOO_LARGE') ? { max: cornerLimitOf(shape) } : null;
+}
+/** One side's wall, the others kept: it must leave room inside, so under the width across it less the opposite wall. */
+export function sideWallLimitOf(shape, wall, side) {
+    const e = shape.extrusion;
+    const axis = side[0];
+    const across = acrossOf(e)[FIGURE_SECTION_PLANE[e.axis].indexOf(axis)];
+    return across - (wall[`${axis}${side[1] === '-' ? '+' : '-'}`] ?? 0);
+}
+/** A wall must leave room inside: under half the narrower width the section has. */
+export const wallLimitOf = (shape) => Math.min(...acrossOf(shape.extrusion)) / 2;
+/** Whether an inside can be taken, asked of the kernel; if not, what to change and the most it can be. */
+export function cavityRefusalOf(shape, request) {
+    const e = shape.extrusion;
+    const sides = sidesOf(e.axis);
+    const wall = typeof request.wall === 'number' ? Object.fromEntries(sides.map(s => [s, request.wall])) : request.wall;
+    const made = figureExtrusionFeaturesOf(e, [{ id: 'inside', wall: wall, start: request.start, end: request.end }]);
+    if (!('refused' in made))
+        return null;
+    const r = made.refused;
+    if (r.code === 'CAVITY' && r.refused === 'NO_ROOM_INSIDE')
+        return { code: 'wall-too-thick', max: mm(wallLimitOf(shape)) };
+    if (r.code === 'CAVITY_NO_LENGTH')
+        return { code: 'ends-too-thick', max: mm(e.end - e.start) };
+    return { code: 'not-positive' };
+}
+/** What the inside makes of the part (§3.3): open at both ends a pipe, at one a container, at neither a closed space. */
+export function cavityResultOf(cavity) {
+    const open = [cavity.start, cavity.end].filter(e => e === 'open').length;
+    return open === 2 ? 'pipe' : open === 1 ? 'container' : 'sealed';
+}
+/** How deep the inside is along the push: the length less the closed ends. */
+export function cavityDepthOf(shape) {
+    const e = shape.extrusion, c = shape.cavity;
+    const closed = (x) => (x === 'open' ? 0 : x.closed);
+    return mm(e.end - e.start - closed(c.start) - closed(c.end));
+}
+//# sourceMappingURL=section-controls.js.map

package/dist-client/modeller/section-controls.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"section-controls.js","sourceRoot":"","sources":["../../client/modeller/section-controls.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,oBAAoB,EAAE,kBAAkB,EAAE,yBAAyB,EAAE,MAAM,wBAAwB,CAAA;AAa5G,kGAAkG;AAClG,MAAM,CAAC,MAAM,SAAS,GAA2B,EAAE,IAAI,EAAE,MAAM,EAAE,IAAI,EAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,EAAE,IAAI,EAAE,KAAK,EAAE,IAAI,EAAE,MAAM,EAAE,IAAI,EAAE,OAAO,EAAE,CAAA;AAC1I,MAAM,CAAC,MAAM,QAAQ,GAAG,CAAC,IAAU,EAAE,GAAQ,EAAE,EAAE,CAAC,SAAS,CAAC,GAAG,IAAI,GAAG,GAAG,KAAK,OAAO,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,EAAE,CAAE,CAAA;AAErG,0FAA0F;AAC1F,MAAM,CAAC,MAAM,MAAM,GAAG,CAAC,MAAuC,EAAE,EAAE,CAChE,MAAM,CAAC,MAAM,IAAI,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,KAAK,SAAS,IAAI,IAAI,CAAC,GAAG,CAAC,CAAC,GAAG,MAAM,CAAC,CAAC,CAAE,CAAC,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,SAAS,CAAA;AAEhH,MAAM,CAAC,MAAM,EAAE,GAAG,CAAC,KAAa,EAAE,EAAE,CAAC,IAAI,CAAC,KAAK,CAAC,KAAK,GAAG,IAAI,CAAC,GAAG,IAAI,CAAA;AAEpE,qHAAqH;AACrH,MAAM,CAAC,MAAM,OAAO,GAAG,CAAC,IAAU,EAAE,EAAE,CAAC,oBAAoB,CAAC,IAAI,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,CAAC,GAAG,EAAE,GAAG,CAAC,GAAG,CAAC,CAAC,CAAA;AAElG,oGAAoG;AACpG,SAAS,QAAQ,CAAC,CAAY;IAC5B,MAAM,CAAC,GAAG,CAAC,CAAC,OAAO,CAAA;IACnB,IAAI,CAAC,CAAC,IAAI,KAAK,WAAW;QAAE,OAAO,oBAAoB,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAE,CAAC,CAAA;IACpF,IAAI,CAAC,CAAC,IAAI,KAAK,SAAS;QAAE,OAAO,oBAAoB,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,MAAM,CAAC,CAAC,CAAE,CAAC,CAAA;IACxF,OAAO,EAAE,CAAA;AACX,CAAC;AAED,gGAAgG;AAChG,MAAM,UAAU,aAAa,CAAC,KAA2B;IACvD,OAAO,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,KAAK,CAAC,IAAI,CAAC,GAAG,CAAC,GAAG,QAAQ,CAAC,KAAK,CAAC,SAAU,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAA;AAC9E,CAAC;AAED;;;GAGG;AACH,MAAM,UAAU,eAAe,CAAC,KAA2B,EAAE,QAAsC,EAAE;IACnG,MAAM,MAAM,GAAG,KAAK,CAAC,MAAM,CAAA;IAC3B,OAAO;QACL,IAAI,EAAE,MAAM,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,MAAM,CAAC,MAAM,CAAC,MAAM,CAAC,IAAI,CAAC,CAAC,IAAI,EAAE,GAAG,MAAM,CAAC,IAAI,EAAE,CAAC,CAAC,CAAC,CAAC,aAAa,CAAC,KAAK,CAAC;QAChG,KAAK,EAAE,MAAM,EAAE,KAAK,IAAI,EAAE,MAAM,EAAE,aAAa,CAAC,KAAK,CAAC,EAAE;QACxD,GAAG,EAAE,MAAM,EAAE,GAAG,IAAI,MAAM;QAC1B,GAAG,KAAK;KACT,CAAA;AACH,CAAC;AAED,mHAAmH;AACnH,MAAM,UAAU,aAAa,CAAC,KAA2B;IACvD,MAAM,CAAC,GAAG,KAAK,CAAC,SAAS,CAAA;IACzB,IAAI,CAAC,EAAE,OAAO,CAAC,IAAI,KAAK,WAAW;QAAE,OAAO,SAAS,CAAA;IACrD,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,oBAAoB,CAAC,CAAC,CAAC,IAAI,CAAC,CAAA;IAC3C,MAAM,GAAG,GAAG,CAAC,GAAG,IAAI,CAAC,GAAG,CAAC,GAAG,QAAQ,CAAC,CAAC,CAAC,CAAC,CAAA;IACxC,MAAM,MAAM,GAAG,kBAAkB,CAAC,EAAE,IAAI,EAAE,WAAW,EAAE,IAAI,EAAE,CAAC,CAAC,OAAO,CAAC,IAAI,EAAE,MAAM,EAAE,EAAE,CAAC,CAAC,CAAC,EAAE,GAAG,EAAE,CAAC,CAAC,CAAC,EAAE,GAAG,EAAE,EAAE,EAAE,CAAC,CAAC,IAAI,CAAC,CAAA;IACtH,MAAM,KAAK,GAAG,MAAM,CAAC,OAAO,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,IAAI,KAAK,kBAAkB,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAA;IACjF,OAAO,KAAK,CAAC,MAAM,CAAC,CAAC,CAAC,IAAI,CAAC,GAAG,CAAC,GAAG,KAAK,CAAC,CAAC,CAAC,CAAC,SAAS,CAAA;AACtD,CAAC;AAED,wEAAwE;AACxE,MAAM,UAAU,eAAe,CAAC,KAA2B,EAAE,MAAc;IACzE,MAAM,CAAC,GAAG,KAAK,CAAC,SAAS,CAAA;IACzB,IAAI,CAAC,EAAE,OAAO,CAAC,IAAI,KAAK,WAAW,IAAI,CAAC,CAAC,MAAM,GAAG,CAAC,CAAC;QAAE,OAAO,IAAI,CAAA;IACjE,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,oBAAoB,CAAC,CAAC,CAAC,IAAI,CAAC,CAAA;IAC3C,MAAM,MAAM,GAAG,kBAAkB,CAAC,EAAE,IAAI,EAAE,WAAW,EAAE,IAAI,EAAE,CAAC,CAAC,OAAO,CAAC,IAAI,EAAE,MAAM,EAAE,EAAE,CAAC,CAAC,CAAC,EAAE,MAAM,EAAE,CAAC,CAAC,CAAC,EAAE,MAAM,EAAE,EAAE,EAAE,CAAC,CAAC,IAAI,CAAC,CAAA;IAC5H,OAAO,MAAM,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,IAAI,KAAK,kBAAkB,CAAC,CAAC,CAAC,CAAC,EAAE,GAAG,EAAE,aAAa,CAAC,KAAK,CAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAA;AAChG,CAAC;AAED,wHAAwH;AACxH,MAAM,UAAU,eAAe,CAAC,KAA2B,EAAE,IAA4B,EAAE,IAAY;IACrG,MAAM,CAAC,GAAG,KAAK,CAAC,SAAU,CAAA;IAC1B,MAAM,IAAI,GAAG,IAAI,CAAC,CAAC,CAAS,CAAA;IAC5B,MAAM,MAAM,GAAG,QAAQ,CAAC,CAAC,CAAC,CAAC,oBAAoB,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,OAAO,CAAC,IAAI,CAAC,CAAE,CAAA;IACvE,OAAO,MAAM,GAAG,CAAC,IAAI,CAAC,GAAG,IAAI,GAAG,IAAI,CAAC,CAAC,CAAC,KAAK,GAAG,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,CAAC,CAAA;AACtE,CAAC;AAED,oFAAoF;AACpF,MAAM,CAAC,MAAM,WAAW,GAAG,CAAC,KAA2B,EAAE,EAAE,CAAC,IAAI,CAAC,GAAG,CAAC,GAAG,QAAQ,CAAC,KAAK,CAAC,SAAU,CAAC,CAAC,GAAG,CAAC,CAAA;AAOvG,0GAA0G;AAC1G,MAAM,UAAU,eAAe,CAAC,KAA2B,EAAE,OAA4B;IACvF,MAAM,CAAC,GAAG,KAAK,CAAC,SAAU,CAAA;IAC1B,MAAM,KAAK,GAAG,OAAO,CAAC,CAAC,CAAC,IAAI,CAAC,CAAA;IAC7B,MAAM,IAAI,GAAG,OAAO,OAAO,CAAC,IAAI,KAAK,QAAQ,CAAC,CAAC,CAAC,MAAM,CAAC,WAAW,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,OAAO,CAAC,IAAc,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,OAAO,CAAC,IAAI,CAAA;IAC9H,MAAM,IAAI,GAAG,yBAAyB,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,EAAE,QAAQ,EAAE,IAAI,EAAE,IAA8B,EAAE,KAAK,EAAE,OAAO,CAAC,KAAK,EAAE,GAAG,EAAE,OAAO,CAAC,GAAG,EAAE,CAAC,CAAC,CAAA;IAC3I,IAAI,CAAC,CAAC,SAAS,IAAI,IAAI,CAAC;QAAE,OAAO,IAAI,CAAA;IACrC,MAAM,CAAC,GAAG,IAAI,CAAC,OAAO,CAAA;IACtB,IAAI,CAAC,CAAC,IAAI,KAAK,QAAQ,IAAI,CAAC,CAAC,OAAO,KAAK,gBAAgB;QAAE,OAAO,EAAE,IAAI,EAAE,gBAAgB,EAAE,GAAG,EAAE,EAAE,CAAC,WAAW,CAAC,KAAK,CAAC,CAAC,EAAE,CAAA;IACzH,IAAI,CAAC,CAAC,IAAI,KAAK,kBAAkB;QAAE,OAAO,EAAE,IAAI,EAAE,gBAAgB,EAAE,GAAG,EAAE,EAAE,CAAC,CAAC,CAAC,GAAG,GAAG,CAAC,CAAC,KAAK,CAAC,EAAE,CAAA;IAC9F,OAAO,EAAE,IAAI,EAAE,cAAc,EAAE,CAAA;AACjC,CAAC;AAED,yHAAyH;AACzH,MAAM,UAAU,cAAc,CAAC,MAAmD;IAChF,MAAM,IAAI,GAAG,CAAC,MAAM,CAAC,KAAK,EAAE,MAAM,CAAC,GAAG,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,KAAK,MAAM,CAAC,CAAC,MAAM,CAAA;IACxE,OAAO,IAAI,KAAK,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,IAAI,KAAK,CAAC,CAAC,CAAC,CAAC,WAAW,CAAC,CAAC,CAAC,QAAQ,CAAA;AAClE,CAAC;AAED,8EAA8E;AAC9E,MAAM,UAAU,aAAa,CAAC,KAA2B;IACvD,MAAM,CAAC,GAAG,KAAK,CAAC,SAAU,EACxB,CAAC,GAAG,KAAK,CAAC,MAAO,CAAA;IACnB,MAAM,MAAM,GAAG,CAAC,CAAiB,EAAE,EAAE,CAAC,CAAC,CAAC,KAAK,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,CAAA;IACnE,OAAO,EAAE,CAAC,CAAC,CAAC,GAAG,GAAG,CAAC,CAAC,KAAK,GAAG,MAAM,CAAC,CAAC,CAAC,KAAK,CAAC,GAAG,MAAM,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAA;AAC9D,CAAC","sourcesContent":["import { FIGURE_SECTION_PLANE, checkFigureSection, figureExtrusionFeaturesOf } from '@hatiolab/figure-model'\nimport type { FigureCavityRequest, FigureEvaluatedShape } from '@hatiolab/figure-model'\n\n/*\n * What the 단면 section of the properties tab reads and asks (ADR-0100 §3.3): a pushed part's corners and its inside.\n * Whether a value can be taken is asked of the kernel's own section checks -- the screen keeps no rule of its own -- and\n * the most it can take is said beside the field, so a refusal names the value to type rather than only that it failed.\n */\n\ntype Axis = 'x' | 'y' | 'z'\ntype End = 'start' | 'end'\ntype Extrusion = NonNullable<FigureEvaluatedShape['extrusion']>\n\n/** The face each side of a section is, and each end of a push: a push's start is its low side. */\nexport const SIDE_FACE: Record<string, string> = { 'x-': 'left', 'x+': 'right', 'y-': 'bottom', 'y+': 'top', 'z-': 'back', 'z+': 'front' }\nexport const END_FACE = (axis: Axis, end: End) => SIDE_FACE[`${axis}${end === 'start' ? '-' : '+'}`]!\n\n/** The one value every entry holds, or undefined when they differ (or there are none). */\nexport const sameOf = (values: readonly (number | undefined)[]) =>\n  values.length && values.every(v => v !== undefined && Math.abs(v - values[0]!) < 1e-6) ? values[0] : undefined\n\nexport const mm = (value: number) => Math.round(value * 1000) / 1000\n\n/** The four sides of a push's section, in the kernel's order: the first plane axis low and high, then the second. */\nexport const sidesOf = (axis: Axis) => FIGURE_SECTION_PLANE[axis].flatMap(a => [`${a}-`, `${a}+`])\n\n/** The section's widths across, one per plane axis: a rectangle's sides, an ellipse's diameters. */\nfunction acrossOf(e: Extrusion): number[] {\n  const s = e.section\n  if (s.kind === 'rectangle') return FIGURE_SECTION_PLANE[e.axis].map(a => s.size[a]!)\n  if (s.kind === 'ellipse') return FIGURE_SECTION_PLANE[e.axis].map(a => 2 * s.radius[a]!)\n  return []\n}\n\n/** The wall a new inside starts with: a tenth of the section's narrower side, at least 1 mm. */\nexport function defaultWallOf(shape: FigureEvaluatedShape): number {\n  return Math.max(1, Math.round(Math.min(...acrossOf(shape.extrusion!)) / 10))\n}\n\n/**\n * The inside as the panel asks for it: the part's own, with one thing changed. A part with none yet gets a default\n * wall all round, a closed start as thick as the wall and an open end -- a tray standing on its floor.\n */\nexport function cavityRequestOf(shape: FigureEvaluatedShape, patch: Partial<FigureCavityRequest> = {}): FigureCavityRequest {\n  const cavity = shape.cavity\n  return {\n    wall: cavity ? (sameOf(Object.values(cavity.wall)) ?? { ...cavity.wall }) : defaultWallOf(shape),\n    start: cavity?.start ?? { closed: defaultWallOf(shape) },\n    end: cavity?.end ?? 'open',\n    ...patch\n  }\n}\n\n/** The most a rectangle's corners can reach: half its narrower side (the kernel's CORNER_TOO_LARGE says where). */\nexport function cornerLimitOf(shape: FigureEvaluatedShape): number | undefined {\n  const e = shape.extrusion\n  if (e?.section.kind !== 'rectangle') return undefined\n  const [u, v] = FIGURE_SECTION_PLANE[e.axis]\n  const far = 2 * Math.max(...acrossOf(e))\n  const issues = checkFigureSection({ kind: 'rectangle', size: e.section.size, corner: { [u]: far, [v]: far } }, e.axis)\n  const maxes = issues.flatMap(i => (i.code === 'CORNER_TOO_LARGE' ? [i.max] : []))\n  return maxes.length ? Math.min(...maxes) : undefined\n}\n\n/** Whether a corner radius can be taken; if not, the most it can be. */\nexport function cornerRefusalOf(shape: FigureEvaluatedShape, radius: number): { max: number } | null {\n  const e = shape.extrusion\n  if (e?.section.kind !== 'rectangle' || !(radius > 0)) return null\n  const [u, v] = FIGURE_SECTION_PLANE[e.axis]\n  const issues = checkFigureSection({ kind: 'rectangle', size: e.section.size, corner: { [u]: radius, [v]: radius } }, e.axis)\n  return issues.some(i => i.code === 'CORNER_TOO_LARGE') ? { max: cornerLimitOf(shape)! } : null\n}\n\n/** One side's wall, the others kept: it must leave room inside, so under the width across it less the opposite wall. */\nexport function sideWallLimitOf(shape: FigureEvaluatedShape, wall: Record<string, number>, side: string): number {\n  const e = shape.extrusion!\n  const axis = side[0] as Axis\n  const across = acrossOf(e)[FIGURE_SECTION_PLANE[e.axis].indexOf(axis)]!\n  return across - (wall[`${axis}${side[1] === '-' ? '+' : '-'}`] ?? 0)\n}\n\n/** A wall must leave room inside: under half the narrower width the section has. */\nexport const wallLimitOf = (shape: FigureEvaluatedShape) => Math.min(...acrossOf(shape.extrusion!)) / 2\n\nexport type FigureCavityAsk =\n  | { code: 'wall-too-thick'; max: number }\n  | { code: 'ends-too-thick'; max: number }\n  | { code: 'not-positive' }\n\n/** Whether an inside can be taken, asked of the kernel; if not, what to change and the most it can be. */\nexport function cavityRefusalOf(shape: FigureEvaluatedShape, request: FigureCavityRequest): FigureCavityAsk | null {\n  const e = shape.extrusion!\n  const sides = sidesOf(e.axis)\n  const wall = typeof request.wall === 'number' ? Object.fromEntries(sides.map(s => [s, request.wall as number])) : request.wall\n  const made = figureExtrusionFeaturesOf(e, [{ id: 'inside', wall: wall as Record<string, number>, start: request.start, end: request.end }])\n  if (!('refused' in made)) return null\n  const r = made.refused\n  if (r.code === 'CAVITY' && r.refused === 'NO_ROOM_INSIDE') return { code: 'wall-too-thick', max: mm(wallLimitOf(shape)) }\n  if (r.code === 'CAVITY_NO_LENGTH') return { code: 'ends-too-thick', max: mm(e.end - e.start) }\n  return { code: 'not-positive' }\n}\n\n/** What the inside makes of the part (§3.3): open at both ends a pipe, at one a container, at neither a closed space. */\nexport function cavityResultOf(cavity: NonNullable<FigureEvaluatedShape['cavity']>): 'pipe' | 'container' | 'sealed' {\n  const open = [cavity.start, cavity.end].filter(e => e === 'open').length\n  return open === 2 ? 'pipe' : open === 1 ? 'container' : 'sealed'\n}\n\n/** How deep the inside is along the push: the length less the closed ends. */\nexport function cavityDepthOf(shape: FigureEvaluatedShape): number {\n  const e = shape.extrusion!,\n    c = shape.cavity!\n  const closed = (x: typeof c.start) => (x === 'open' ? 0 : x.closed)\n  return mm(e.end - e.start - closed(c.start) - closed(c.end))\n}\n"]}

package/dist-client/modeller/starting-shape.d.ts

@@ -0,0 +1,32 @@
+/**
+ * What a person calls a part's shape (ADR-0100 §2.1): the starting shape it reads as -- 상자, 둥근 상자, 위가 열린 상자,
+ * 원기둥, 문틀, 구, 원뿔, 그린 단면. A word for the screen, read from the shape node's own params; it is not a kind of
+ * stored shape, and nothing is decided by it.
+ */
+export type StartingShapeKind = 'cube' | 'rounded-box' | 'hollow-box' | 'cylinder' | 'portal' | 'sphere' | 'frustum' | 'polygon';
+export declare function startingShapeKindOf(shape: {
+    op: string;
+    params?: Record<string, unknown>;
+} | undefined): StartingShapeKind | undefined;
+/**
+ * The same word for an evaluated body, when only the shape the kernel evaluated is in hand (a row of the parts list):
+ * a door frame is the section with jambs, a drawn section the rest of the drawn ones.
+ */
+export declare function startingShapeKindOfBody(shape: {
+    provider?: string;
+    dimensions?: Record<string, number>;
+    extrusion?: {
+        section: {
+            kind: string;
+            corner?: unknown;
+        };
+    };
+    cavity?: unknown;
+    revolution?: {
+        profile: {
+            kind: string;
+        };
+    };
+} | undefined): StartingShapeKind | undefined;
+/** Whether a body is round across -- a circle or an ellipse pushed, anything turned: it takes a segment count. */
+export declare const isRoundBody: (shape: Parameters<typeof startingShapeKindOfBody>[0]) => boolean;

package/dist-client/modeller/starting-shape.js

@@ -0,0 +1,37 @@
+export function startingShapeKindOf(shape) {
+    const p = shape?.params ?? {};
+    if (shape?.op === 'revolve@1')
+        return p.profile === 'taper' ? 'frustum' : 'sphere';
+    if (shape?.op !== 'extrude@1')
+        return undefined;
+    if (p.section === 'ellipse')
+        return 'cylinder';
+    if (p.section === 'polygon')
+        return 'polygon';
+    if (p.section === 'portal')
+        return 'portal';
+    if (p.cavity)
+        return 'hollow-box';
+    return p.corner === 'round' ? 'rounded-box' : 'cube';
+}
+/**
+ * The same word for an evaluated body, when only the shape the kernel evaluated is in hand (a row of the parts list):
+ * a door frame is the section with jambs, a drawn section the rest of the drawn ones.
+ */
+export function startingShapeKindOfBody(shape) {
+    if (shape?.revolution)
+        return shape.revolution.profile.kind === 'taper' ? 'frustum' : 'sphere';
+    const s = shape?.extrusion?.section;
+    if (!s)
+        return undefined;
+    if (s.kind === 'ellipse')
+        return 'cylinder';
+    if (s.kind === 'polygon')
+        return shape.dimensions?.jamb !== undefined ? 'portal' : 'polygon';
+    if (shape.cavity)
+        return 'hollow-box';
+    return s.corner ? 'rounded-box' : 'cube';
+}
+/** Whether a body is round across -- a circle or an ellipse pushed, anything turned: it takes a segment count. */
+export const isRoundBody = (shape) => ['cylinder', 'sphere', 'frustum'].includes(startingShapeKindOfBody(shape) ?? '');
+//# sourceMappingURL=starting-shape.js.map

package/dist-client/modeller/starting-shape.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"starting-shape.js","sourceRoot":"","sources":["../../client/modeller/starting-shape.ts"],"names":[],"mappings":"AAOA,MAAM,UAAU,mBAAmB,CAAC,KAAmE;IACrG,MAAM,CAAC,GAAG,KAAK,EAAE,MAAM,IAAI,EAAE,CAAA;IAC7B,IAAI,KAAK,EAAE,EAAE,KAAK,WAAW;QAAE,OAAO,CAAC,CAAC,OAAO,KAAK,OAAO,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,QAAQ,CAAA;IAClF,IAAI,KAAK,EAAE,EAAE,KAAK,WAAW;QAAE,OAAO,SAAS,CAAA;IAC/C,IAAI,CAAC,CAAC,OAAO,KAAK,SAAS;QAAE,OAAO,UAAU,CAAA;IAC9C,IAAI,CAAC,CAAC,OAAO,KAAK,SAAS;QAAE,OAAO,SAAS,CAAA;IAC7C,IAAI,CAAC,CAAC,OAAO,KAAK,QAAQ;QAAE,OAAO,QAAQ,CAAA;IAC3C,IAAI,CAAC,CAAC,MAAM;QAAE,OAAO,YAAY,CAAA;IACjC,OAAO,CAAC,CAAC,MAAM,KAAK,OAAO,CAAC,CAAC,CAAC,aAAa,CAAC,CAAC,CAAC,MAAM,CAAA;AACtD,CAAC;AAED;;;GAGG;AACH,MAAM,UAAU,uBAAuB,CAAC,KAAwM;IAC9O,IAAI,KAAK,EAAE,UAAU;QAAE,OAAO,KAAK,CAAC,UAAU,CAAC,OAAO,CAAC,IAAI,KAAK,OAAO,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,QAAQ,CAAA;IAC9F,MAAM,CAAC,GAAG,KAAK,EAAE,SAAS,EAAE,OAAO,CAAA;IACnC,IAAI,CAAC,CAAC;QAAE,OAAO,SAAS,CAAA;IACxB,IAAI,CAAC,CAAC,IAAI,KAAK,SAAS;QAAE,OAAO,UAAU,CAAA;IAC3C,IAAI,CAAC,CAAC,IAAI,KAAK,SAAS;QAAE,OAAO,KAAM,CAAC,UAAU,EAAE,IAAI,KAAK,SAAS,CAAC,CAAC,CAAC,QAAQ,CAAC,CAAC,CAAC,SAAS,CAAA;IAC7F,IAAI,KAAM,CAAC,MAAM;QAAE,OAAO,YAAY,CAAA;IACtC,OAAO,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,aAAa,CAAC,CAAC,CAAC,MAAM,CAAA;AAC1C,CAAC;AAED,kHAAkH;AAClH,MAAM,CAAC,MAAM,WAAW,GAAG,CAAC,KAAoD,EAAE,EAAE,CAAC,CAAC,UAAU,EAAE,QAAQ,EAAE,SAAS,CAAC,CAAC,QAAQ,CAAC,uBAAuB,CAAC,KAAK,CAAC,IAAI,EAAE,CAAC,CAAA","sourcesContent":["/**\n * What a person calls a part's shape (ADR-0100 §2.1): the starting shape it reads as -- 상자, 둥근 상자, 위가 열린 상자,\n * 원기둥, 문틀, 구, 원뿔, 그린 단면. A word for the screen, read from the shape node's own params; it is not a kind of\n * stored shape, and nothing is decided by it.\n */\nexport type StartingShapeKind = 'cube' | 'rounded-box' | 'hollow-box' | 'cylinder' | 'portal' | 'sphere' | 'frustum' | 'polygon'\n\nexport function startingShapeKindOf(shape: { op: string; params?: Record<string, unknown> } | undefined): StartingShapeKind | undefined {\n  const p = shape?.params ?? {}\n  if (shape?.op === 'revolve@1') return p.profile === 'taper' ? 'frustum' : 'sphere'\n  if (shape?.op !== 'extrude@1') return undefined\n  if (p.section === 'ellipse') return 'cylinder'\n  if (p.section === 'polygon') return 'polygon'\n  if (p.section === 'portal') return 'portal'\n  if (p.cavity) return 'hollow-box'\n  return p.corner === 'round' ? 'rounded-box' : 'cube'\n}\n\n/**\n * The same word for an evaluated body, when only the shape the kernel evaluated is in hand (a row of the parts list):\n * a door frame is the section with jambs, a drawn section the rest of the drawn ones.\n */\nexport function startingShapeKindOfBody(shape: { provider?: string; dimensions?: Record<string, number>; extrusion?: { section: { kind: string; corner?: unknown } }; cavity?: unknown; revolution?: { profile: { kind: string } } } | undefined): StartingShapeKind | undefined {\n  if (shape?.revolution) return shape.revolution.profile.kind === 'taper' ? 'frustum' : 'sphere'\n  const s = shape?.extrusion?.section\n  if (!s) return undefined\n  if (s.kind === 'ellipse') return 'cylinder'\n  if (s.kind === 'polygon') return shape!.dimensions?.jamb !== undefined ? 'portal' : 'polygon'\n  if (shape!.cavity) return 'hollow-box'\n  return s.corner ? 'rounded-box' : 'cube'\n}\n\n/** Whether a body is round across -- a circle or an ellipse pushed, anything turned: it takes a segment count. */\nexport const isRoundBody = (shape: Parameters<typeof startingShapeKindOfBody>[0]) => ['cylinder', 'sphere', 'frustum'].includes(startingShapeKindOfBody(shape) ?? '')\n"]}