@things-factory/figure-ui 10.1.42 → 10.1.44

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@things-factory/figure-ui",
-  "version": "10.1.42",
+  "version": "10.1.44",
   "publishConfig": {
     "access": "public",
     "@things-factory:registry": "https://registry.npmjs.org"
@@ -37,8 +37,8 @@
     "@operato/shell": "^10.0.0",
     "@operato/styles": "^10.0.0",
     "@operato/utils": "^10.0.0",
-    "@things-factory/figure-service": "^10.1.42",
+    "@things-factory/figure-service": "^10.1.44",
     "three": "^0.185.1"
   },
-  "gitHead": "982aa01403b979c4e348fd207a3fb4d1a7b5f521"
+  "gitHead": "7c95c4e75e155e51c714409e865d96f317232c23"
 }

package/test/v3-parts-wiring.test.ts

@@ -54,3 +54,13 @@ test('둥근 상자는 제 이름으로 부른다 — 「사각 단면」은 V2
   for (const lang of ['ko', 'en', 'ja', 'zh', 'ms'])
     assert.ok(JSON.parse(read(`../translations/${lang}.json`))['figure.label.primitive-rounded-box'], lang)
 })
+
+test('부품 이름은 figure-model 의 rename-part 로 바꾸고, 거절은 까닭별로 사람의 말로 한다', () => {
+  assert.match(editor, /this\.session!\.edit\(\{ kind: 'rename-part', target: from, name \}\)/)
+  assert.match(editor, /this\.selected = name/, '바꾼 이름의 부품이 그대로 골라져 있다')
+  assert.match(editor, /'figure\.text\.part-name-taken' : 'figure\.text\.part-name-invalid'/)
+  for (const lang of ['ko', 'en', 'ja', 'zh', 'ms']) {
+    const table = JSON.parse(read(`../translations/${lang}.json`))
+    for (const key of ['figure.text.part-name-taken', 'figure.text.part-name-invalid']) assert.ok(table[key]?.includes('{name}'), `${lang}: ${key}`)
+  }
+})

package/translations/en.json

@@ -46,6 +46,8 @@
   "figure.text.declared-space-none": "not declared yet.",
   "figure.text.mounting-face-needs-space": "declare the space first to choose one.",
   "figure.text.part-is-referenced": "'{part}' cannot be deleted: another part is fastened to it or follows its size. Undo that link first.",
+  "figure.text.part-name-invalid": "'{name}' cannot be a part name. Start with a letter and use letters, digits, - and _.",
+  "figure.text.part-name-taken": "'{name}' is already used in this figure.",
   "figure.text.placement-redeclares": "changing it declares the space again from the parts as they are now.",
   "figure.text.recommended-fix-explained": "{n} changes rechecked against every resize case. They apply to this draft only; review and save when ready.",
   "figure.text.show-affected-parts": "show affected parts",

package/translations/ja.json

@@ -44,6 +44,8 @@
   "figure.text.declared-space-none": "まだ宣言していません。",
   "figure.text.mounting-face-needs-space": "先に空間を宣言すると選べます。",
   "figure.text.part-is-referenced": "'{part}' には他の部品が取り付けられているか、そのサイズに従っているため削除できません。先にその連結を外してください。",
+  "figure.text.part-name-invalid": "'{name}' は部品名に使えません。英字で始め、英字・数字・-・_ のみ使えます。",
+  "figure.text.part-name-taken": "'{name}' はこの図形ですでに使われている名前です。",
   "figure.text.placement-redeclares": "変更すると、今の部品で空間を宣言し直します。",
   "figure.text.recommended-fix-explained": "すべてのサイズ変更ケースを再検査した {n} 件の修正です。下書きだけに適用され、保存前に確認できます。",
   "figure.text.show-affected-parts": "影響する部品を見る",
@@ -553,5 +555,9 @@
   "figure.label.state-inputs": "state inputs",
   "figure.label.design-inputs": "design inputs",
   "figure.text.release-blocked": "Release is blocked — {count}",
-  "figure.text.release-ready": "Ready to release"
+  "figure.text.release-ready": "Ready to release",
+  "figure.button.keep-changed-appearance": "調整したモデル幅で公開",
+  "figure.button.restore-released-base": "以前のモデル幅に戻す",
+  "figure.text.appearance-choice-explained": "戻すと X と Z を直前の公開値に戻し、Y とほかの編集はそのまま残します。調整した幅で公開すると、今のモデルの外形を残します。",
+  "figure.text.choose-appearance-change": "調整したモデル幅の扱いを選んでください"
 }

package/translations/ko.json

@@ -46,6 +46,8 @@
   "figure.text.declared-space-none": "아직 선언하지 않았습니다.",
   "figure.text.mounting-face-needs-space": "공간을 먼저 선언해야 고를 수 있습니다.",
   "figure.text.part-is-referenced": "'{part}' 에 다른 부품이 붙어 있거나 그 크기를 따르고 있어 지울 수 없습니다. 그 연결을 먼저 푸세요.",
+  "figure.text.part-name-invalid": "'{name}' 은 부품 이름으로 쓸 수 없습니다. 영문자로 시작하고 영문자·숫자·-·_ 만 씁니다.",
+  "figure.text.part-name-taken": "'{name}' 은 이 도형에서 이미 쓰는 이름입니다.",
   "figure.text.placement-redeclares": "바꾸면 지금 부품으로 공간을 다시 선언합니다.",
   "figure.text.recommended-fix-explained": "서버가 전체 크기 변경을 다시 검사한 {n}개 수정입니다. 초안에만 적용되며 저장 전 확인할 수 있습니다.",
   "figure.text.show-affected-parts": "영향 받는 부품 보기",

package/translations/ms.json

@@ -44,6 +44,8 @@
   "figure.text.declared-space-none": "belum diisytiharkan.",
   "figure.text.mounting-face-needs-space": "isytiharkan ruang dahulu untuk memilih.",
   "figure.text.part-is-referenced": "'{part}' tidak boleh dipadam: bahagian lain dipasang padanya atau mengikut saiznya. Leraikan pautan itu dahulu.",
+  "figure.text.part-name-invalid": "'{name}' tidak boleh menjadi nama bahagian. Mulakan dengan huruf dan gunakan huruf, digit, - dan _.",
+  "figure.text.part-name-taken": "'{name}' sudah digunakan dalam bentuk ini.",
   "figure.text.placement-redeclares": "menukarnya mengisytiharkan semula ruang daripada bahagian semasa.",
   "figure.text.recommended-fix-explained": "{n} pembetulan telah diperiksa semula untuk semua keadaan saiz. Ia hanya digunakan pada draf ini; semak dan simpan apabila sedia.",
   "figure.text.show-affected-parts": "tunjukkan bahagian terjejas",
@@ -553,5 +555,9 @@
   "figure.label.state-inputs": "state inputs",
   "figure.label.design-inputs": "design inputs",
   "figure.text.release-blocked": "Release is blocked — {count}",
-  "figure.text.release-ready": "Ready to release"
+  "figure.text.release-ready": "Ready to release",
+  "figure.button.keep-changed-appearance": "terbitkan dengan lebar model yang dilaraskan",
+  "figure.button.restore-released-base": "pulihkan lebar model sebelumnya",
+  "figure.text.appearance-choice-explained": "Pulihkan mengembalikan X dan Z kepada nilai terbitan sebelumnya dan mengekalkan Y serta semua suntingan lain. Menerbitkan dengan lebar yang dilaraskan mengekalkan garis luar model semasa.",
+  "figure.text.choose-appearance-change": "pilih cara mengendalikan lebar model yang dilaraskan"
 }

package/translations/zh.json

@@ -44,6 +44,8 @@
   "figure.text.declared-space-none": "尚未声明。",
   "figure.text.mounting-face-needs-space": "请先声明空间，然后才能选择。",
   "figure.text.part-is-referenced": "无法删除 '{part}'：有其他部件固定在它上面或跟随它的尺寸。请先解除该连接。",
+  "figure.text.part-name-invalid": "'{name}' 不能作为部件名称。请以字母开头，只使用字母、数字、- 和 _。",
+  "figure.text.part-name-taken": "'{name}' 在此图形中已被使用。",
   "figure.text.placement-redeclares": "更改后将按当前部件重新声明空间。",
   "figure.text.recommended-fix-explained": "已针对所有尺寸变化情况重新检查的 {n} 项修正。它们只应用到草稿；请确认后再保存。",
   "figure.text.show-affected-parts": "查看受影响部件",
@@ -553,5 +555,9 @@
   "figure.label.state-inputs": "state inputs",
   "figure.label.design-inputs": "design inputs",
   "figure.text.release-blocked": "Release is blocked — {count}",
-  "figure.text.release-ready": "Ready to release"
+  "figure.text.release-ready": "Ready to release",
+  "figure.button.keep-changed-appearance": "以调整后的模型宽度发布",
+  "figure.button.restore-released-base": "恢复为之前的模型宽度",
+  "figure.text.appearance-choice-explained": "恢复会把 X 和 Z 还原为上次发布的值，并保留 Y 及其他所有编辑。以调整后的宽度发布则保留当前模型轮廓。",
+  "figure.text.choose-appearance-change": "请选择如何处理调整后的模型宽度"
 }