@things-factory/figure-ui 10.1.181 → 10.1.183

package/translations/es.json

@@ -530,7 +530,6 @@
   "figure.label.fastened-to": "sujeta a",
   "figure.label.not-fastened": "sin sujetar",
   "figure.label.my-face": "mi cara",
-  "figure.label.target-part": "pieza de destino",
   "figure.label.target-face": "cara de destino",
   "figure.label.stands-on-plane": "apoyar en el plano de montaje",
   "figure.label.facing-meet": "caras en contacto",
@@ -560,6 +559,10 @@
   "figure.text.preview-face-unknown": "Esta cara no se puede mostrar en el lienzo.",
   "figure.text.target-would-loop": "{part}: unida a {mine}, no se puede elegir",
   "figure.label.fasten-detail": "Detalles",
+  "figure.label.fasten-what": "En qué pieza",
+  "figure.label.fasten-face-on-part": "En qué cara de {part}",
+  "figure.label.fasten-face-on-plane": "Dónde en el {plane}",
+  "figure.label.fasten-how": "Cómo se coloca",
   "figure.label.facing": "Cómo se unen las caras",
   "figure.text.fasten-summary-gap": "separación {mm} mm",
   "figure.text.fasten-summary-gap-worked-out": "separación calculada por una fórmula",
@@ -877,10 +880,8 @@
   "figure.button.show-model-settings": "Mostrar la configuración del modelo",
   "figure.text.new-figure-name": "Nueva figura",
   "figure.text.fasten-editing": "Editando la unión actual: su {face} en {target}",
-  "figure.text.fasten-new": "Unir de nuevo",
   "figure.text.fasten-start": "Una esta pieza a una cara de otra pieza para que mantengan su relación cuando cualquiera de ellas cambie.",
   "figure.button.fasten-start": "Unir a otra pieza",
-  "figure.label.target-part-placeholder": "Elija una pieza",
   "figure.text.fasten-target-first": "Elija primero la pieza a la que unirla.",
   "figure.text.fasten-edit-on-plane": "Esta pieza está conectada a la referencia de colocación del modelo. Sepárela antes de unirla a otra pieza.",
   "figure.button.align-to-floor": "apoyar en el suelo",

package/translations/ja.json

@@ -530,7 +530,6 @@
   "figure.label.fastened-to": "fastened to",
   "figure.label.not-fastened": "not fastened",
   "figure.label.my-face": "my face",
-  "figure.label.target-part": "target part",
   "figure.label.target-face": "target face",
   "figure.label.stands-on-plane": "stand on the mounting plane",
   "figure.label.facing-meet": "faces meet",
@@ -560,6 +559,10 @@
   "figure.text.preview-face-unknown": "この面はキャンバスに表示できません。",
   "figure.text.target-would-loop": "{part} — {mine} に取り付いているため選べません",
   "figure.label.fasten-detail": "詳細",
+  "figure.label.fasten-what": "どの部品に",
+  "figure.label.fasten-face-on-part": "{part}のどの面に",
+  "figure.label.fasten-face-on-plane": "{plane}のどこに",
+  "figure.label.fasten-how": "どう置くか",
   "figure.label.facing": "接し方",
   "figure.text.fasten-summary-gap": "間隔 {mm} mm",
   "figure.text.fasten-summary-gap-worked-out": "間隔は式で決まる",
@@ -877,10 +880,8 @@
   "figure.button.show-model-settings": "モデル設定を表示",
   "figure.text.new-figure-name": "新しい Figure",
   "figure.text.fasten-editing": "現在の取り付けを編集: {face}を{target}に",
-  "figure.text.fasten-new": "新しく取り付ける",
   "figure.text.fasten-start": "別の部品の面に取り付けると、相手の部品が変わっても関係を保ちます。",
   "figure.button.fasten-start": "別の部品に取り付ける",
-  "figure.label.target-part-placeholder": "取り付ける部品を選択",
   "figure.text.fasten-target-first": "先に取り付ける部品を選んでください。",
   "figure.text.fasten-edit-on-plane": "この部品はモデルの設置基準に接続されています。別の部品に取り付ける前に外してください。",
   "figure.button.align-to-floor": "床に合わせる",

package/translations/ko.json

@@ -530,7 +530,6 @@
   "figure.label.fastened-to": "붙은 곳",
   "figure.label.not-fastened": "붙지 않음",
   "figure.label.my-face": "내 면",
-  "figure.label.target-part": "상대 부품",
   "figure.label.target-face": "상대 면",
   "figure.label.stands-on-plane": "장착 평면에 세우기",
   "figure.label.facing-meet": "맞닿게",
@@ -560,6 +559,10 @@
   "figure.text.preview-face-unknown": "이 면은 캔버스에 표시하지 못합니다.",
   "figure.text.target-would-loop": "{part} — {mine}에 붙어 있어 고를 수 없음",
   "figure.label.fasten-detail": "세부",
+  "figure.label.fasten-what": "어느 부품에",
+  "figure.label.fasten-face-on-part": "{part}의 어느 면에",
+  "figure.label.fasten-face-on-plane": "{plane}의 어디에",
+  "figure.label.fasten-how": "어떻게 놓을지",
   "figure.label.facing": "닿는 방식",
   "figure.text.fasten-summary-gap": "간격 {mm} mm",
   "figure.text.fasten-summary-gap-worked-out": "간격은 식으로 정해짐",
@@ -877,10 +880,8 @@
   "figure.button.show-model-settings": "모델 설정 보기",
   "figure.text.new-figure-name": "새 Figure",
   "figure.text.fasten-editing": "현재 관계 수정 — {face} → {target}",
-  "figure.text.fasten-new": "새로 붙이기",
   "figure.text.fasten-start": "이 부품을 다른 부품의 면에 붙여 두면, 상대 부품의 크기나 위치가 바뀌어도 함께 움직입니다.",
   "figure.button.fasten-start": "다른 부품에 붙이기",
-  "figure.label.target-part-placeholder": "붙일 부품 선택",
   "figure.text.fasten-target-first": "먼저 붙일 부품을 선택해 주세요.",
   "figure.text.fasten-edit-on-plane": "이 부품은 현재 모델의 설치 기준면에 연결되어 있습니다. 다른 부품에 붙이려면 먼저 붙임을 푸세요.",
   "figure.button.align-to-floor": "바닥에 내려놓기",

package/translations/ms.json

@@ -530,7 +530,6 @@
   "figure.label.fastened-to": "fastened to",
   "figure.label.not-fastened": "not fastened",
   "figure.label.my-face": "my face",
-  "figure.label.target-part": "target part",
   "figure.label.target-face": "target face",
   "figure.label.stands-on-plane": "stand on the mounting plane",
   "figure.label.facing-meet": "faces meet",
@@ -560,6 +559,10 @@
   "figure.text.preview-face-unknown": "Muka ini tidak dapat ditunjukkan pada kanvas.",
   "figure.text.target-would-loop": "{part} — dilekatkan pada {mine}, tidak boleh dipilih",
   "figure.label.fasten-detail": "Butiran",
+  "figure.label.fasten-what": "Pada bahagian mana",
+  "figure.label.fasten-face-on-part": "Pada muka {part} yang mana",
+  "figure.label.fasten-face-on-plane": "Di mana pada {plane}",
+  "figure.label.fasten-how": "Bagaimana diletakkan",
   "figure.label.facing": "Cara muka bertemu",
   "figure.text.fasten-summary-gap": "jarak {mm} mm",
   "figure.text.fasten-summary-gap-worked-out": "jarak ditentukan oleh formula",
@@ -877,10 +880,8 @@
   "figure.button.show-model-settings": "Tunjukkan tetapan model",
   "figure.text.new-figure-name": "Rajah baharu",
   "figure.text.fasten-editing": "Menyunting lekatan semasa: {face} pada {target}",
-  "figure.text.fasten-new": "Lekatkan baharu",
   "figure.text.fasten-start": "Lekatkan bahagian ini pada muka bahagian lain supaya hubungannya kekal apabila salah satu berubah.",
   "figure.button.fasten-start": "Lekatkan pada bahagian lain",
-  "figure.label.target-part-placeholder": "Pilih bahagian",
   "figure.text.fasten-target-first": "Pilih bahagian yang hendak dilekatkan dahulu.",
   "figure.text.fasten-edit-on-plane": "Bahagian ini disambungkan kepada rujukan peletakan model. Tanggalkan dahulu sebelum melekatkannya pada bahagian lain.",
   "figure.button.align-to-floor": "Jajarkan ke lantai",

package/translations/zh.json

@@ -530,7 +530,6 @@
   "figure.label.fastened-to": "fastened to",
   "figure.label.not-fastened": "not fastened",
   "figure.label.my-face": "my face",
-  "figure.label.target-part": "target part",
   "figure.label.target-face": "target face",
   "figure.label.stands-on-plane": "stand on the mounting plane",
   "figure.label.facing-meet": "faces meet",
@@ -560,6 +559,10 @@
   "figure.text.preview-face-unknown": "此面无法在画布上显示。",
   "figure.text.target-would-loop": "{part} — 已附着于 {mine},无法选择",
   "figure.label.fasten-detail": "详细",
+  "figure.label.fasten-what": "附着到哪个部件",
+  "figure.label.fasten-face-on-part": "{part}的哪个面",
+  "figure.label.fasten-face-on-plane": "{plane}上的哪里",
+  "figure.label.fasten-how": "如何放置",
   "figure.label.facing": "接触方式",
   "figure.text.fasten-summary-gap": "间距 {mm} mm",
   "figure.text.fasten-summary-gap-worked-out": "间距由公式决定",
@@ -877,10 +880,8 @@
   "figure.button.show-model-settings": "查看模型设置",
   "figure.text.new-figure-name": "新 Figure",
   "figure.text.fasten-editing": "编辑当前附着：{face}附着在{target}上",
-  "figure.text.fasten-new": "新建附着",
   "figure.text.fasten-start": "将此部件附着到另一部件的面上，任一部件变化时都会保持该关系。",
   "figure.button.fasten-start": "附着到另一部件",
-  "figure.label.target-part-placeholder": "选择部件",
   "figure.text.fasten-target-first": "请先选择要附着的部件。",
   "figure.text.fasten-edit-on-plane": "此部件当前连接到模型的安装基准。附着到另一部件前请先解除连接。",
   "figure.button.align-to-floor": "对齐地面",