@things-factory/figure-ui 10.1.151 → 10.1.152

package/test/browser/screen.check.mjs

@@ -648,7 +648,8 @@ describe('the preview: registered as a board registers it, posed and played, the
     await mode('preview')
     await until('the preview stands', () => !!screenCheck.deep('figure-preview')[0]?.shadowRoot?.querySelector('div[clips]'))
     const type = await read(() => screenCheck.previewTypeOf(screenCheck.editor().session.read().context))
-    assert.equal(await read(type => screenCheck.registered(type), type), true, `registered as ${type}`)
+    /* The preview made earlier stands hidden and is shown again first: registered once it has the figure as it is now. */
+    await until(`registered as ${type}`, type => screenCheck.registered(type), type)
     assert.equal(await read(() => screenCheck.registered('figure-preview-new') && screenCheck.editor().session.read().context !== ''), false, 'not under another figure\'s type')
     await boardsUp()
     await read(() => {

package/test/fields.test.ts

@@ -76,12 +76,8 @@ test('pitch 는 한 곳에서 하나의 값이고, 늘 set-repeat 로 바꿔 최
   }
 })
 
-test('기즈모로 끈, 규칙이 자리를 정하는 부품은 규칙을 지킨 채 옮겨지고, 관절·붙이기가 정하는 부품은 까닭을 말한다 — 튕겨 돌아가지 않는다', () => {
-  const editor = readFileSync(fileURLToPath(new URL('../client/modeller/editor.ts', import.meta.url)), 'utf8')
-  const moved = editor.slice(editor.indexOf('  private transformed('), editor.indexOf('  /** 맞추기'))
-  assert.ok(moved.includes("kind: 'nudge-part',"), '사용자 2026-09-24: 「기즈모 컨트롤도 전혀 작동이 안되는군」')
-  assert.ok(moved.includes('...(Object.keys(grow).length ? { grow } : {})'), '크기 끌기도 배율로 — 「되는 듯하다가 다시 원래 크기로 돌아간다」')
-  /* Which of the two places it is said from the refusal's details (refusals.test.ts makes both with the kernel, ADR-0127). */
-  assert.ok(moved.includes('placedRefusalOf(error, partLabelOf(id)'), moved)
-})
-
+/*
+ * A gizmo drag on a part a rule places is written as the rule's nudge, growing by a ratio on a scale drag
+ * (modeller.check.mjs, the gizmo on a part placed by worked-out rules); one a joint places is refused in words from the
+ * kernel's details (editing.check.mjs).
+ */

package/test/fix-alignment.test.ts

@@ -0,0 +1,32 @@
+/*
+ * 정렬·간격 고치기 (fasten-geometry `insideAlignmentOf`): the alignment that brings a part inside the face it is fastened
+ * on -- the least move on each side it is out, the centre when it is wider -- or why there is nothing to move.
+ */
+import { test } from 'node:test'
+import assert from 'node:assert/strict'
+
+import { insideAlignmentOf, type FaceView } from '../client/modeller/fasten-geometry.js'
+
+/* A 400 × 1000 top, a 100 × 100 footprint on it; edges offered on X, a distance only on Z. */
+const view = (part = { x: 100, y: 100, z: 100 }): FaceView => ({ axes: ['x', 'z'], face: { x: 400, z: 1000 }, part, edges: { x: true, y: true, z: false } })
+
+test('out past the low edge: moved to that edge from inside, the other axis left as it was', () => {
+  const fixed = insideAlignmentOf(view(), { x: 'mm', z: 'centre' }, { x: -1000 })
+  assert.deepEqual(fixed, { align: { x: 'min', z: 'centre' }, alignMm: { x: -1000 }, moved: ['x'] })
+})
+
+test('out past the high edge where edges are not offered: that edge as a distance', () => {
+  const fixed = insideAlignmentOf(view(), { x: 'centre', z: 'mm' }, { z: 900 })
+  assert.deepEqual(fixed, { align: { x: 'centre', z: 'mm' }, alignMm: { z: 450 }, moved: ['z'] })
+})
+
+test('wider than the face: centred, the most of it on the face', () => {
+  const fixed = insideAlignmentOf(view({ x: 600, y: 100, z: 100 }), { x: 'max' }, {})
+  assert.deepEqual(fixed, { align: { x: 'centre' }, alignMm: {}, moved: ['x'] })
+})
+
+test('nothing of it out: inside -- what is out is fastened on it; no face size: unmeasured', () => {
+  assert.deepEqual(insideAlignmentOf(view(), { x: 'max', z: 'centre' }, {}), { cannot: 'inside' })
+  assert.deepEqual(insideAlignmentOf(undefined, {}, {}), { cannot: 'unmeasured' })
+  assert.deepEqual(insideAlignmentOf({ ...view(), face: { x: 400 } }, {}, {}), { cannot: 'unmeasured' })
+})

package/test/mesh-import.test.ts

@@ -8,7 +8,7 @@ import assert from 'node:assert/strict'
 import { readFileSync } from 'node:fs'
 import { fileURLToPath } from 'node:url'
 
-import { meshChoicesOf, meshPartIdOf, meshPartOf, type MeshUpload } from '../client/modeller/mesh-import.js'
+import { meshChoicesOf, meshPartOf, type MeshUpload } from '../client/modeller/mesh-import.js'
 
 const read = (path: string) => readFileSync(fileURLToPath(new URL(path, import.meta.url)), 'utf8')
 const HASH = 'c'.repeat(64)
@@ -59,13 +59,6 @@ test('a node: its own bounds and counts, standing and turned where the file had
   assert.throws(() => meshPartOf(upload, { node: 3 }, 'x'), 'a node that cannot be a part is not made one')
 })
 
-test("a part's id from a node's name: letter-led and clean, another number when taken", () => {
-  assert.equal(meshPartIdOf('Hoist Unit #2', new Set()), 'Hoist-Unit-2')
-  assert.equal(meshPartIdOf('2nd beam', new Set()), 'nd-beam')
-  assert.equal(meshPartIdOf('###', new Set()), 'mesh')
-  assert.equal(meshPartIdOf('hoist', new Set(['hoist', 'hoist-2'])), 'hoist-3')
-})
-
 /* The screen itself -- the palette's button, the upload, the question, the step added -- is driven in browser/places-mesh.check.mjs. */
 test('the mesh words are in every language', () => {
   for (const lang of ['en', 'es', 'ja', 'ko', 'ms', 'zh']) {

package/test/parts-wiring.test.ts

@@ -11,7 +11,6 @@ import { readFileSync } from 'node:fs'
 import { fileURLToPath } from 'node:url'
 
 const read = (path: string) => readFileSync(fileURLToPath(new URL(path, import.meta.url)), 'utf8')
-const editor = read('../client/modeller/editor.ts')
 
 /*
  * Each event the panel sends answered by the editor -- picked, moved, duplicated, removed, added, hidden -- as one step
@@ -37,10 +36,7 @@ test('팔레트는 시작 모양만 낸다 — 둥근 상자와 통은 상자의
 })
 
 test('부품 이름은 figure-model 의 rename-part 로 바꾸고, 거절은 까닭별로 사람의 말로 한다', () => {
-  assert.match(editor, /this\.session!\.edit\(\{ kind: 'rename-part', target: from, name \}\)/)
-  assert.match(editor, /this\.selected = name/, '바꾼 이름의 부품이 그대로 골라져 있다')
-  /* The reason is the kernel's refusal (ADR-0127): the screen does not check the name again (refusals.test.ts makes all three). */
-  assert.match(editor, /this\.error = partNameRefusalOf\(error, /)
+  /* Renamed in one step and still selected, and a refused name said from the kernel's details: parts.check.mjs. */
   for (const lang of ['ko', 'en', 'ja', 'zh', 'ms', 'es']) {
     const table = JSON.parse(read(`../translations/${lang}.json`))
     for (const key of ['figure.text.part-name-taken', 'figure.text.part-name-invalid']) assert.ok(table[key]?.includes('{name}'), `${lang}: ${key}`)

package/test/refusals.test.ts

@@ -210,6 +210,34 @@ test('줄이 한도를 넘으면 몇 개가 되는지와 한도를 말한다 —
   assert.ok(bodies.includes('19,402') && bodies.includes('10,000'), bodies)
 })
 
+test('일상에서 코드로만 보이던 거절 넷 — 줄이 안 들어감 · 같은 축의 줄 안의 줄 · 기준면이 걸린 부품의 줄 · 쓰인 부품 id (:3300, 2026-10-11)', () => {
+  const shelf = () => {
+    let a = fm.addFigureBox(fm.createFigureAsset('Shelf'), { id: 'board', size: { x: 400, y: 50, z: 1000 }, position: { x: 0, y: 0, z: 0 } })
+    a = fm.addFigureBox(a, { id: 'bin', size: { x: 100, y: 100, z: 100 }, position: { x: 0, y: 0, z: 0 } })
+    a = act(a, { kind: 'attach', part: 'board', face: 'bottom', to: { plane: 'mounting-plane' } })
+    return act(a, { kind: 'attach', part: 'bin', face: 'bottom', to: { part: 'board', face: 'top' } })
+  }
+  /* Five 100 mm bins asked for on 400 mm. */
+  const fit = editRefusalOf(refusalOf(() => act(shelf(), { kind: 'make-repeat', part: 'bin', axis: 'x', pitch: 1, count: 5 })), keyed)
+  assert.match(fit, /row-does-not-fit .*"count":"5".*"length":"400".*"extent":"100"/)
+  /* A cap on the roller made a row along X, as the roller's row is. */
+  let capped = fm.addFigureBox(conveyor(), { id: 'cap', size: { x: 20, y: 20, z: 20 }, position: { x: 0, y: 0, z: 0 } })
+  capped = act(capped, { kind: 'attach', part: 'cap', face: 'bottom', to: { part: 'roller', face: 'top' } })
+  assert.match(editRefusalOf(refusalOf(() => act(capped, { kind: 'make-repeat', part: 'cap', axis: 'x', pitch: 10 })), keyed), /row-same-axis .*"part":"cap","outer":"roller","axis":"X"/)
+  /* The bin's top holds the slot layout: made a row, the layout would stand on no one bin. */
+  const slotted = act(shelf(), {
+    kind: 'set-slot-layout',
+    label: 'Bin',
+    role: 'seat',
+    anchors: [{ id: 'bin', part: 'bin', face: 'top' }],
+    layout: { tiers: [{ tierNo: 1, anchorId: 'bin', mount: 'ON', position: { x: 0, y: 0, z: 0 }, rotation: 0, layout: { pattern: 'SINGLE', slot: { allowed: { width: 100, depth: 100, height: 100 }, accepts: ['TOTE'] } } }] }
+  })
+  const held = editRefusalOf(refusalOf(() => act(slotted, { kind: 'make-repeat', part: 'bin', axis: 'x', pitch: 150 })), say)
+  assert.ok(held.includes('bin') && held.includes('자리 배치') && !held.includes('SURFACE_PROVENANCE'), held)
+  /* A new part named as the row's part is (its copies drawn under ids of their own): the same words as a rename. */
+  assert.match(editRefusalOf(refusalOf(() => fm.addFigureBox(conveyor(), { id: 'roller', size: { x: 1, y: 1, z: 1 }, position: { x: 0, y: 0, z: 0 } })), keyed), /part-name-taken .*"name":"roller"/)
+})
+
 test('기즈모로 옮길 수 없는 부품 — 관절이 자리를 정하는지, 붙은 면이 정하는지', () => {
   assert.match(placedRefusalOf(refusalOf(() => act(conveyor(), { kind: 'nudge-part', part: 'roller', by: { x: 10 } })), '롤러', keyed)!, /gizmo-joint-places .*"part":"롤러"/)
   assert.match(placedRefusalOf(refusalOf(() => act(conveyor(), { kind: 'scale-position', part: 'roller', axis: 'x' })), '롤러', keyed)!, /gizmo-fastening-places .*"part":"롤러"/)

package/translations/en.json

@@ -59,6 +59,12 @@
   "figure.text.row-copies-over-limit": "At this pitch the row has {count} copies. A row takes up to {limit}. Widen the pitch.",
   "figure.text.row-geometry-over-limit": "Laid out, the row would draw {count} bodies. A figure draws up to {limit}.",
   "figure.text.row-copies-out-of-range": "A row has {min} to {max} copies. Given: {count}",
+  "figure.text.row-does-not-fit": "{count} do not fit in {length} mm: each is {extent} mm. Make fewer, or make the part smaller.",
+  "figure.text.row-same-axis": "{outer}'s row already runs along {axis}. A row of {part} inside it runs along another axis.",
+  "figure.text.row-face-held-slot-layout": "The slot layout stands on a face of {part}, so it cannot be made a row. Move that anchor of the slot layout first.",
+  "figure.text.row-face-held-place": "A place is on a face of {part}, so it cannot be made a row. Remove that place first.",
+  "figure.text.row-face-held-footprint": "The figure's room is measured from a face of {part}, so it cannot be made a row. Change the room first.",
+  "figure.text.row-face-held-other": "A face of {part} is used elsewhere, so it cannot be made a row.",
   "figure.text.gizmo-joint-places": "a joint places {part}. move it with its control in the motion tab.",
   "figure.label.motion-continuous": "turn without end",
   "figure.text.fasten-before-moving": "fasten it to another part or the floor first; then it can move.",
@@ -549,6 +555,8 @@
   "figure.text.overhang-side-low": "{axis} low side {mm} mm",
   "figure.text.overhang-side-high": "{axis} high side {mm} mm",
   "figure.button.fix-alignment": "change alignment and gap",
+  "figure.text.fix-alignment-inside": "{part} is inside the face. What is out is a part fastened on {part}: pick that part to fix it.",
+  "figure.text.fix-alignment-unmeasured": "The face of {on} cannot be measured, so it cannot be lined up for you. Drag the part in the drawing below.",
   "figure.text.detach-moves": "Detached, it moves:",
   "figure.text.detach-keeps-children": "Parts fastened to it ({parts}) stay fastened to it.",
   "figure.text.detach-clips": "Detaching removes clips: {clips}. You will be asked when you detach.",

package/translations/es.json

@@ -59,6 +59,12 @@
   "figure.text.row-copies-over-limit": "Con este paso la fila tiene {count} copias. Una fila admite hasta {limit}. Amplíe el paso.",
   "figure.text.row-geometry-over-limit": "Desplegada, la fila dibujaría {count} cuerpos. Una figura dibuja hasta {limit}.",
   "figure.text.row-copies-out-of-range": "Una fila tiene de {min} a {max} copias. Valor dado: {count}",
+  "figure.text.row-does-not-fit": "{count} no caben en {length} mm: cada una mide {extent} mm. Ponga menos o haga la pieza más pequeña.",
+  "figure.text.row-same-axis": "La fila de {outer} ya va a lo largo de {axis}. Una fila de {part} dentro de ella va por otro eje.",
+  "figure.text.row-face-held-slot-layout": "La disposición de huecos se apoya en una cara de {part}, así que no puede convertirse en fila. Cambie antes esa referencia de la disposición.",
+  "figure.text.row-face-held-place": "Hay un lugar en una cara de {part}, así que no puede convertirse en fila. Quite antes ese lugar.",
+  "figure.text.row-face-held-footprint": "El espacio de la figura se mide desde una cara de {part}, así que no puede convertirse en fila. Cambie antes ese espacio.",
+  "figure.text.row-face-held-other": "Una cara de {part} se usa en otro lugar, así que no puede convertirse en fila.",
   "figure.text.gizmo-joint-places": "una articulación coloca {part}. muévala con su control en la pestaña de movimiento.",
   "figure.label.motion-continuous": "girar sin fin",
   "figure.text.fasten-before-moving": "primero sujétela a otra pieza o al suelo; después podrá moverse.",
@@ -549,6 +555,8 @@
   "figure.text.overhang-side-low": "{axis} lado inferior {mm} mm",
   "figure.text.overhang-side-high": "{axis} lado superior {mm} mm",
   "figure.button.fix-alignment": "cambiar alineación y separación",
+  "figure.text.fix-alignment-inside": "{part} está dentro de la cara. Lo que sobresale es una pieza sujeta a {part}: selecciónela para corregirla.",
+  "figure.text.fix-alignment-unmeasured": "No se puede medir la cara de {on}, así que no se puede alinear automáticamente. Arrastre la pieza en el dibujo de abajo.",
   "figure.text.detach-moves": "Al separarla, se mueve:",
   "figure.text.detach-keeps-children": "Las piezas sujetas a ella ({parts}) siguen sujetas a ella.",
   "figure.text.detach-clips": "Al separarla se eliminan clips: {clips}. Se le preguntará al separarla.",

package/translations/ja.json

@@ -59,6 +59,12 @@
   "figure.text.row-copies-over-limit": "この間隔では列が {count} 個になります。1 列は {limit} 個までです。間隔を広げてください。",
   "figure.text.row-geometry-over-limit": "列を展開すると形状が {count} 個になります。図形は {limit} 個まで描きます。",
   "figure.text.row-copies-out-of-range": "列の個数は {min}~{max} 個です。入力値: {count}",
+  "figure.text.row-does-not-fit": "{count} 個は {length} mm に収まりません。1 個が {extent} mm です。個数を減らすか部品を小さくしてください。",
+  "figure.text.row-same-axis": "{outer} の列はすでに {axis} 方向です。{part} の列は別の方向に並べてください。",
+  "figure.text.row-face-held-slot-layout": "{part} の面を場所の配置が基準面として使っているため、列にできません。先に場所の配置の基準面を変えてください。",
+  "figure.text.row-face-held-place": "{part} の面に場所があるため、列にできません。先にその場所を削除してください。",
+  "figure.text.row-face-held-footprint": "{part} の面が占有空間の基準のため、列にできません。先に占有空間を変えてください。",
+  "figure.text.row-face-held-other": "{part} の面がほかで使われているため、列にできません。",
   "figure.text.gizmo-joint-places": "{part} は関節に付いていて、関節が位置を決めます。動きタブの操作値で動かしてください。",
   "figure.label.motion-continuous": "無限回転",
   "figure.text.fasten-before-moving": "先に他の部品か床に取り付けると、動きを付けられます。",
@@ -549,6 +555,8 @@
   "figure.text.overhang-side-low": "{axis} 低い側 {mm} mm",
   "figure.text.overhang-side-high": "{axis} 高い側 {mm} mm",
   "figure.button.fix-alignment": "位置合わせ・間隔を直す",
+  "figure.text.fix-alignment-inside": "{part} は面の内側にあります。はみ出しているのは {part} に付いた部品です。その部品を選んで直してください。",
+  "figure.text.fix-alignment-unmeasured": "{on} の面の大きさを測れないため、自動では合わせられません。下の図で部品をドラッグして動かしてください。",
   "figure.text.detach-moves": "外すと位置が変わります:",
   "figure.text.detach-keeps-children": "この部品に取り付いた部品({parts})はそのまま取り付いています。",
   "figure.text.detach-clips": "外すとクリップが削除されます: {clips}。外すときにもう一度確認します。",

package/translations/ko.json

@@ -59,6 +59,12 @@
   "figure.text.row-copies-over-limit": "간격이 좁아 줄이 {count}개가 됩니다. 한 줄은 {limit}개까지입니다. 간격을 넓혀 주세요.",
   "figure.text.row-geometry-over-limit": "줄을 펼치면 형상이 {count}개가 됩니다. 도형은 {limit}개까지 그립니다.",
   "figure.text.row-copies-out-of-range": "줄의 개수는 {min}~{max}개입니다. 넣은 값: {count}",
+  "figure.text.row-does-not-fit": "{count}개가 {length} mm 안에 들어가지 않습니다. 하나가 {extent} mm입니다. 개수를 줄이거나 부품을 줄여 주세요.",
+  "figure.text.row-same-axis": "{outer}의 줄이 이미 {axis} 방향입니다. {part}의 줄은 다른 방향으로 늘어나야 합니다.",
+  "figure.text.row-face-held-slot-layout": "{part}의 면을 자리 배치가 기준면으로 쓰고 있어 줄로 바꿀 수 없습니다. 자리 배치의 기준면을 먼저 바꿔 주세요.",
+  "figure.text.row-face-held-place": "{part}의 면에 자리가 있어 줄로 바꿀 수 없습니다. 그 자리를 먼저 지워 주세요.",
+  "figure.text.row-face-held-footprint": "{part}의 면이 점유 공간의 기준이라 줄로 바꿀 수 없습니다. 점유 공간을 먼저 바꿔 주세요.",
+  "figure.text.row-face-held-other": "{part}의 면을 다른 곳에서 쓰고 있어 줄로 바꿀 수 없습니다.",
   "figure.text.gizmo-joint-places": "{part} 부품은 관절에 달려 있어 관절이 자리를 정합니다. 움직임 탭의 조작값으로 움직이세요.",
   "figure.label.motion-continuous": "끝없이 회전",
   "figure.text.fasten-before-moving": "먼저 다른 부품이나 바닥에 붙여야 움직임을 줄 수 있습니다.",
@@ -549,6 +555,8 @@
   "figure.text.overhang-side-low": "{axis} 낮은 쪽 {mm} mm",
   "figure.text.overhang-side-high": "{axis} 높은 쪽 {mm} mm",
   "figure.button.fix-alignment": "정렬·간격 고치기",
+  "figure.text.fix-alignment-inside": "{part}은(는) 면 안에 있습니다. 밖으로 나온 것은 {part}에 붙은 부품이니, 그 부품을 골라 고쳐 주세요.",
+  "figure.text.fix-alignment-unmeasured": "{on}의 면 크기를 잴 수 없어 자동으로 맞출 수 없습니다. 아래 그림에서 끌어 옮겨 주세요.",
   "figure.text.detach-moves": "떼면 자리가 바뀝니다:",
   "figure.text.detach-keeps-children": "이 부품에 붙은 부품({parts})은 그대로 이 부품에 붙어 있습니다.",
   "figure.text.detach-clips": "떼면 클립이 지워집니다: {clips}. 뗄 때 다시 묻습니다.",

package/translations/ms.json

@@ -59,6 +59,12 @@
   "figure.text.row-copies-over-limit": "Pada jarak ini barisan mempunyai {count} salinan. Satu barisan mengambil sehingga {limit}. Lebarkan jarak.",
   "figure.text.row-geometry-over-limit": "Apabila dibentangkan, barisan akan melukis {count} jasad. Rajah melukis sehingga {limit}.",
   "figure.text.row-copies-out-of-range": "Satu barisan mempunyai {min} hingga {max} salinan. Diberi: {count}",
+  "figure.text.row-does-not-fit": "{count} tidak muat dalam {length} mm: setiap satu {extent} mm. Kurangkan bilangan atau kecilkan bahagian.",
+  "figure.text.row-same-axis": "Baris {outer} sudah berjalan sepanjang {axis}. Baris {part} di dalamnya mesti berjalan pada paksi lain.",
+  "figure.text.row-face-held-slot-layout": "Susun atur slot berdiri pada permukaan {part}, jadi ia tidak boleh dijadikan baris. Tukar sauh susun atur slot itu dahulu.",
+  "figure.text.row-face-held-place": "Ada tempat pada permukaan {part}, jadi ia tidak boleh dijadikan baris. Buang tempat itu dahulu.",
+  "figure.text.row-face-held-footprint": "Ruang rajah diukur dari permukaan {part}, jadi ia tidak boleh dijadikan baris. Tukar ruang rajah dahulu.",
+  "figure.text.row-face-held-other": "Permukaan {part} digunakan di tempat lain, jadi ia tidak boleh dijadikan baris.",
   "figure.text.gizmo-joint-places": "sendi menentukan kedudukan {part}. gerakkannya dengan kawalannya di tab gerakan.",
   "figure.label.motion-continuous": "putaran tanpa henti",
   "figure.text.fasten-before-moving": "lekatkan pada bahagian lain atau lantai dahulu; kemudian ia boleh bergerak.",
@@ -549,6 +555,8 @@
   "figure.text.overhang-side-low": "{axis} sisi bawah {mm} mm",
   "figure.text.overhang-side-high": "{axis} sisi atas {mm} mm",
   "figure.button.fix-alignment": "ubah penjajaran dan jarak",
+  "figure.text.fix-alignment-inside": "{part} berada di dalam permukaan. Yang terkeluar ialah bahagian yang diikat pada {part}: pilih bahagian itu untuk membetulkannya.",
+  "figure.text.fix-alignment-unmeasured": "Permukaan {on} tidak dapat diukur, jadi ia tidak dapat dijajarkan secara automatik. Seret bahagian dalam lukisan di bawah.",
   "figure.text.detach-moves": "Apabila ditanggalkan, ia bergerak:",
   "figure.text.detach-keeps-children": "Bahagian yang dilekatkan padanya ({parts}) kekal dilekatkan.",
   "figure.text.detach-clips": "Menanggalkan membuang klip: {clips}. Anda akan ditanya semasa menanggalkan.",

package/translations/zh.json

@@ -59,6 +59,12 @@
   "figure.text.row-copies-over-limit": "此间距下一排有 {count} 个。一排最多 {limit} 个。请加大间距。",
   "figure.text.row-geometry-over-limit": "展开后这一排有 {count} 个形体。图形最多绘制 {limit} 个。",
   "figure.text.row-copies-out-of-range": "一排的数量为 {min}~{max} 个。输入值: {count}",
+  "figure.text.row-does-not-fit": "{length} mm 内放不下 {count} 个：每个 {extent} mm。请减少个数或缩小部件。",
+  "figure.text.row-same-axis": "{outer} 的排列已沿 {axis} 方向。{part} 的排列须沿另一个方向。",
+  "figure.text.row-face-held-slot-layout": "位置布局以 {part} 的面为基准面，因此不能改为排列。请先更改位置布局的基准面。",
+  "figure.text.row-face-held-place": "{part} 的面上有位置，因此不能改为排列。请先删除该位置。",
+  "figure.text.row-face-held-footprint": "占用空间以 {part} 的面为基准，因此不能改为排列。请先更改占用空间。",
+  "figure.text.row-face-held-other": "{part} 的面在别处被使用，因此不能改为排列。",
   "figure.text.gizmo-joint-places": "{part} 由关节决定位置。请用运动标签中的控制值移动它。",
   "figure.label.motion-continuous": "无限旋转",
   "figure.text.fasten-before-moving": "请先将其固定到其他部件或地面上，然后才能添加运动。",
@@ -549,6 +555,8 @@
   "figure.text.overhang-side-low": "{axis} 低侧 {mm} mm",
   "figure.text.overhang-side-high": "{axis} 高侧 {mm} mm",
   "figure.button.fix-alignment": "修改对齐和间距",
+  "figure.text.fix-alignment-inside": "{part} 在面内。超出的是固定在 {part} 上的部件，请选中该部件进行修正。",
+  "figure.text.fix-alignment-unmeasured": "无法测量 {on} 的面，因此无法自动对齐。请在下方图中拖动部件。",
   "figure.text.detach-moves": "拆下后位置会改变:",
   "figure.text.detach-keeps-children": "附着在此部件上的部件({parts})仍附着在它上面。",
   "figure.text.detach-clips": "拆下会删除片段:{clips}。拆下时会再次确认。",