@things-factory/figure-ui 10.1.104 → 10.1.106

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@things-factory/figure-ui",
-  "version": "10.1.104",
+  "version": "10.1.106",
   "publishConfig": {
     "access": "public",
     "@things-factory:registry": "https://registry.npmjs.org"
@@ -27,8 +27,8 @@
     "clean": "npm run clean:server && npm run clean:client"
   },
   "dependencies": {
-    "@hatiolab/figure-model": "^0.2.4",
-    "@hatiolab/things-scene": "^10.1.64",
+    "@hatiolab/figure-model": "^0.2.7",
+    "@hatiolab/things-scene": "^10.1.65",
     "@material/web": "^2.0.0",
     "@operato/data-grist": "^10.0.0",
     "@operato/graphql": "^10.0.0",
@@ -40,9 +40,9 @@
     "@operato/shell": "^10.0.0",
     "@operato/styles": "^10.0.0",
     "@operato/utils": "^10.0.0",
-    "@things-factory/ai-assistant": "^10.1.104",
-    "@things-factory/figure-service": "^10.1.84",
+    "@things-factory/ai-assistant": "^10.1.106",
+    "@things-factory/figure-service": "^10.1.106",
     "three": "^0.185.1"
   },
-  "gitHead": "0d05c7573220c6da2dec2654a4b86d7bd8e3c4fb"
+  "gitHead": "8d78c14708420773ec32d18b8dd44c300771c44d"
 }

package/test/cavity-drawing.test.ts

@@ -61,9 +61,18 @@ test('커널이 거절할 모양은 보내지 않고 까닭을 말한다 — 끄
 })
 
 test('단면 칸에 그림이 들어간다: 속 공간이 있을 때, 면마다 벽 토글을 따른다', () => {
-  has(panel, /cavity \? html`<figure-cavity-drawing \.body=\$\{body\} \.perSide=\$\{this\.perSide\} \?locked=\$\{this\.locked\}><\/figure-cavity-drawing>` : nothing/)
+  has(panel, /\? html`<figure-cavity-drawing \.body=\$\{body\} \.perSide=\$\{this\.perSide\} \?locked=\$\{this\.locked\}><\/figure-cavity-drawing>/)
+  /* The number fields under the drawing went: a wall's number or a closed end's is pressed and typed in the drawing. */
+  assert.ok(!panel.includes("cavityField(") && !panel.includes('renderEnd('), 'no number fields repeating the drawing')
+  has(drawing, /@pointerdown=\$\{\(ev: PointerEvent\) => this\.type\(ev, \{ kind: 'wall', side \}, 'top', w\.wall\[side\]!\)\}/)
+  has(drawing, /!open && this\.type\(ev, \{ kind: 'end', end \}, 'side'/)
   for (const lang of ['ko', 'en', 'ja', 'zh', 'ms']) {
     const t = JSON.parse(read(`../translations/${lang}.json`)) as Record<string, string>
     for (const key of ['figure.label.section-cavity-top', 'figure.label.section-cavity-side']) assert.ok(t[key], `${lang} ${key}`)
   }
 })
+
+test('맞은편 벽의 숫자와 손잡이가 겹치지 않는다: 숫자는 단면 바깥, 좁은 속에서는 손잡이가 비킨다', () => {
+  has(drawing, /const tx = a === h \? ox \+ sign \* \(half\[a\] \+ 5\) : ox,\s*ty = a === v \? oy \+ sign \* \(half\[a\] \+ \(low \? 5 : 13\)\) : oy \+ 4/, 'past the outer edge on its own side')
+  has(drawing, /const aside = room < 16 \? sign \* 9 : 0/, 'two handles close together step apart')
+})

package/test/command-preview.test.ts

@@ -86,13 +86,16 @@ test('the editor shows it only for the figure, version and part it was worked ou
   assert.ok(links.includes('<button act ?disabled=${this.locked || !action} @click=${() => action && this.command(action)}>'), 'the button applies the command the preview showed')
 })
 
-test('the details fold, and what they hold that is not the default stays said', () => {
+test('the details fold, and what they hold that is not the default stays said -- nothing for the default', () => {
   const links = read('../client/modeller/figure-links.ts')
   assert.ok(links.includes('<details fasten-detail>'))
-  assert.ok(links.includes("detail.length ? detail.join(' · ') : i18next.t('figure.text.fasten-summary-default')"))
+  assert.ok(links.includes("${detail.length ? html` · <span fasten-summary>${detail.join(' · ')}</span>` : nothing}"))
+  /* The way and the place on the face are the drawing's: not said again in the summary, nor chosen again in the details. */
+  assert.ok(!links.includes('fasten-summary-edge') && !links.includes('fasten-summary-off-centre') && !links.includes("'figure.label.facing-flush'"))
+  assert.ok(links.includes('({ axis }) => !view || !view.axes.includes(axis) || !!f.alignInput?.[axis] || hasInstanceSize(asset, axis)'), 'a row only where the drawing cannot set it')
   for (const lang of ['en', 'ja', 'ko', 'ms', 'zh']) {
     const t = JSON.parse(read(`../translations/${lang}.json`))
-    for (const key of ['preview-refused', 'preview-stays', 'preview-moves', 'preview-turns-named', 'preview-turns-slanted', 'preview-carries', 'preview-copies', 'preview-clips', 'preview-face-unknown', 'target-would-loop', 'fasten-summary-default', 'fasten-summary-gap', 'fasten-summary-twist', 'fasten-summary-off-centre', 'fasten-summary-edge-min', 'fasten-summary-edge-max', 'fasten-summary-follows'])
+    for (const key of ['preview-refused', 'preview-stays', 'preview-moves', 'preview-turns-named', 'preview-turns-slanted', 'preview-carries', 'preview-copies', 'preview-clips', 'preview-face-unknown', 'target-would-loop', 'fasten-summary-gap', 'fasten-summary-twist'])
       assert.ok(t[`figure.text.${key}`], `${lang} ${key}`)
     assert.ok(t['figure.label.fasten-detail'] && t['figure.label.facing'], lang)
   }
@@ -153,6 +156,9 @@ test('a row is seen before it is made, read as figure-model draws it -- and said
   assert.deepEqual(rowWordsOf(three, say), ['roller 3개 · X 방향 · pitch 970 mm (중심 간격)', '가운데 정렬 · 양 끝에 0 mm씩 남음'])
   const links = read('../client/modeller/figure-links.ts')
   assert.ok(links.includes("<p hint row-blocked>${i18next.t(`figure.text.row-blocked-${blocked ?? 'unfastened'}`, { part: this.partId })}</p>"), 'not hidden: why')
+  /* Folded, its head the section's: opened, it says why; open by itself only while it is worked. */
+  assert.ok(links.includes("const head = html`<summary><h3>${i18next.t('figure.label.repeat')}</h3></summary>`"))
+  assert.ok(links.includes("<section row><details row-fold>") && links.includes("<details row-fold ?open=${this.working === 'row'}>"))
   assert.ok(links.includes("this.candidate = this.working === 'row' && this.rowCandidate ? { action: this.rowCandidate } : this.fastenCandidate"), 'the form being worked on is the one seen')
   const editor = read('../client/modeller/editor.ts')
   assert.ok(editor.includes("const row = candidate.action.kind === 'make-repeat' ? figureRowOf(seen.asset, this.selected, this.currentInputs()) : undefined"))
@@ -231,7 +237,8 @@ test('past the edge of its face is said beside the fastening, with the way to ch
   assert.ok(editor.includes("else if (own?.state === 'possible') words.push(say('figure.text.overhang-possible', where(own)))"))
   assert.ok(editor.includes("else if (own?.state === 'unknown') words.push(say('figure.text.overhang-unknown', where(own)))"))
   const links = read('../client/modeller/figure-links.ts')
-  assert.ok(links.includes("<button act @click=${() => this.openDetail()}><md-icon>tune</md-icon>${i18next.t('figure.button.fix-alignment')}</button>"))
+  assert.ok(links.includes("<button act @click=${() => this.showWhere()}><md-icon>tune</md-icon>${i18next.t('figure.button.fix-alignment')}</button>"))
+  assert.ok(links.includes("shadowRoot?.querySelector<HTMLElement>('div[where]')"), 'to the face in the drawing, where the place is dragged or keyed')
   assert.equal(say('figure.text.overhang-out', { on: 'top', face: '윗면', sides: say('figure.text.overhang-side-high', { axis: 'X', mm: '100' }) }), 'top의 윗면 가장자리 밖으로 나와 있습니다: X 높은 쪽 100 mm. 모델의 점유 공간과는 따로 봅니다.')
   for (const lang of ['en', 'ja', 'ko', 'ms', 'zh']) {
     const t = JSON.parse(read(`../translations/${lang}.json`))

package/test/first-minute.test.ts

@@ -98,8 +98,12 @@ test('the fastening form says whether it edits the current relation or fastens a
   /* Anew is said; the one it has is said once, by the sentence over the drawing (user 2026-10-01: no third line). */
   assert.ok(links.includes("${current ? nothing : html`<p fasten-mode>${editing}</p>`}"))
   assert.ok(links.includes('<p fasten-sentence>'))
-  assert.ok(links.includes("i18next.t(current ? 'figure.button.fasten-update' : 'figure.button.fasten')"))
+  /* A fastening the part has is changed as soon as something is chosen (2026-10-02): 붙이기 only for a new one. */
+  assert.ok(links.includes("${held\n        ? nothing\n        : html`<button act ?disabled=${this.locked || !action} @click=${() => action && this.command(action)}>"))
+  assert.ok(links.includes('if (value) settle()'), 'another target taken at once')
+  assert.ok(links.includes("action && !held && this.working === 'fasten' ? this.renderPreviewWords() : nothing"), 'no words for a command no button sends')
+  assert.ok(links.includes('const settle = () => this.onFastenRelease(!!held)'))
   const ko = JSON.parse(read('../translations/ko.json'))
   assert.equal(ko['figure.text.fasten-new'], '새로 붙이기')
-  assert.equal(ko['figure.button.fasten-update'], '이 붙임 수정')
+  assert.equal(ko['figure.button.fasten-update'], undefined)
 })

package/test/layout.test.ts

@@ -97,3 +97,14 @@ test('맞추기는 글자 단추로 — 옮기는 넷(가운데 X·Z, 면에 대
   )
   assert.ok(!ko['figure.text.center-on-x']!.includes('기준 상자'), 'says what the centre is')
 })
+
+test('불러오는 동안 빈 무대에 「도형을 추가해…」가 깜빡이지 않고, 좁은 화면 알림은 이 브라우저에서 한 번', () => {
+  const canvas = read('../client/modeller/canvas.ts')
+  /* A new figure's start card says how to begin; an empty stage otherwise is one loading, or with every part hidden. */
+  assert.ok(canvas.includes('return html`<div stage></div>`'))
+  assert.ok(!canvas.includes('add-a-shape-to-start') && !editor.includes('startShown'))
+  for (const lang of ['ko', 'en', 'ja', 'zh', 'ms'])
+    assert.equal((JSON.parse(read(`../translations/${lang}.json`)) as Record<string, string>)['figure.text.add-a-shape-to-start'], undefined, lang)
+  assert.ok(editor.includes("if (!foldSaid()) notify({ level: 'info', message: i18next.t('figure.text.parts-panel-folded-narrow') })"))
+  assert.ok(/function foldSaid\(\): boolean \{\s*try \{\s*if \(localStorage\.getItem\('figure-fold-said'\)\) return true\s*localStorage\.setItem\('figure-fold-said', '1'\)\s*\} catch/.test(editor), 'storage refused: said, as before')
+})

package/test/section-editor.test.ts

@@ -111,7 +111,8 @@ test('치는 동안 입체는 그 점으로 그려지고, 잘못된 동안은
   const body = drawn.find(p => p.id === 'wedge') as unknown as { shape: FigureEvaluatedShape }
   assert.equal((body.shape.extrusion!.section as { points: unknown[] }).points.length, 4)
   assert.equal(pointsOf(t).length, 3, 'the figure itself is not changed')
-  has(editorPanel, /detail: \{ action: this\.action\(this\.lastValid\) \}/, 'the preview is always of a valid shape')
+  has(editorPanel, /private preview\(w = this\.lastValid\) \{\s*this\.dispatchEvent\(new CustomEvent\('command-live', \{ detail: \{ action: this\.action\(w\) \}/, 'the preview is always of a valid shape')
+  has(editorPanel, /this\.preview\(c && this\.valid\(\{ \.\.\.this\.working, cavity: c \}\) \? \{ \.\.\.this\.working, cavity: c \} : this\.lastValid\)/, 'the one other: the inside being dragged, when valid')
   has(editorPanel, /figure\.text\.section-editor-last-valid/)
 })
 
@@ -181,7 +182,9 @@ test('편집 창이 열린 동안 모델러의 키는 비켜선다 — Esc 가
 test('속성의 형상 치수에는 점·꼭짓점 칸이 없다 (사용자 10-01) — 높이만 남고, 단면 칸이 점 개수를 말한다', async () => {
   const { groupFields } = await import('../client/modeller/fields.ts')
   const f = (id: string) => ({ id, value: 0, unit: 'mm' })
-  const ids = ['tip.dimension.height', 'tip.point.p1.x', 'tip.point.p1.z', 'tip.point.p12.x', 'tip.apex.x', 'tip.apex.z', 'tip.position.x']
+  const ids = ['tip.dimension.height', 'tip.point.p1.x', 'tip.point.p1.z', 'tip.point.p12.x', 'tip.apex.x', 'tip.apex.z', 'tip.position.x',
+    /* A tote's corners and inside are the 단면 group's too, not the shape's list under inner names. */
+    'tip.dimension.round', 'tip.dimension.wall', 'tip.dimension.closed.start', 'tip.dimension.wallX', 'tip.corner.x', 'tip.wall.x-']
   const { singles } = groupFields(ids.map(f) as never, 'tip')
   assert.deepEqual(singles.map(g => (g as { field: { id: string } }).field.id), ['tip.dimension.height'])
   has(sectionPanel, /e\.apex \? 'figure\.text\.section-points-apex' : 'figure\.text\.section-points', \{ points: String\(e\.section\.points\.length\) \}/)
@@ -202,7 +205,7 @@ test('사각형·원도 같은 창에서 — 폭·지름·길이를 한 명령
   const box = applyFigureAuthoring(addFigureBox(createFigureAsset('B'), { id: 'b', size: { x: 400, y: 200, z: 300 }, position: { x: 0, y: 100, z: 0 } }), { kind: 'set-placement', placement: 'floor' })
   const shape = (compileFigureAsset(box).evaluate().geometry.find(g => (g as { id: string }).id === 'b') as unknown as { shape: FigureEvaluatedShape }).shape
   const w = workingOf(shape)
-  assert.deepEqual(w, { points: [], across: { x: 400, z: 300 }, length: 200, apex: null })
+  assert.deepEqual(w, { points: [], across: { x: 400, z: 300 }, length: 200, apex: null, cavity: null })
   assert.deepEqual(sectionOf(shape, { ...w, across: { x: 500, z: 300 } }), { kind: 'rectangle', size: { x: 500, z: 300 } })
   assert.deepEqual(figureSectionMeasuresOf(box, 'b')!.measures, { y: 'editable', x: 'editable', z: 'editable' })
   /* The editor sends only what changed: a measure left alone may follow another value and must not be written. */
@@ -229,6 +232,32 @@ test('속 공간이 있으면 폭·길이가 그 벽과 막힌 끝을 남기는
   assert.deepEqual(workingIssuesOf(shape, { ...workingOf(shape), across: { x: 90, z: 300 } }).words, [])
 })
 
+test('창 안에서 폭과 속 공간을 함께 — 넓힌 폭에서만 들어가는 벽이 한 명령으로 들어가고, 그림은 고치는 중인 폭으로 판정한다', async () => {
+  const { addFigureBox } = await import('@hatiolab/figure-model')
+  const { workingOf, workingIssuesOf, workingShapeOf } = await import('../client/modeller/section-drawing.ts')
+  const { cavityRefusalOf } = await import('../client/modeller/section-controls.ts')
+  const tray = applyFigureAuthoring(addFigureBox(createFigureAsset('T'), { id: 't', size: { x: 400, y: 200, z: 300 }, position: { x: 0, y: 100, z: 0 } }), { kind: 'set-cavity', part: 't', cavity: { wall: 40, start: { closed: 30 }, end: 'open' } })
+  const shape = (compileFigureAsset(tray).evaluate().geometry.find(g => (g as { id: string }).id === 't') as unknown as { shape: FigureEvaluatedShape }).shape
+  const w = workingOf(shape)
+  assert.deepEqual(w.cavity, { wall: { 'x-': 40, 'x+': 40, 'z-': 40, 'z+': 40 }, start: { closed: 30 }, end: 'open' })
+  /* 160 mm walls leave no room in 300 deep; widened to 600 × 400 they do. */
+  const thick = { ...w.cavity!, wall: { 'x-': 160, 'x+': 160, 'z-': 160, 'z+': 160 } }
+  assert.equal(cavityRefusalOf(shape, thick)?.code, 'wall-too-thick', 'judged on the opened widths: refused')
+  const wide = { ...w, across: { x: 600, z: 400 }, cavity: thick }
+  assert.equal(cavityRefusalOf(workingShapeOf(shape, wide), thick), null, 'judged on the widths being typed: taken')
+  assert.deepEqual(workingIssuesOf(shape, wide).words, [])
+  assert.equal(workingIssuesOf(shape, { ...wide, across: { x: 400, z: 300 } }).words[0]!.key, 'figure.text.section-issue-cavity-walls')
+  assert.deepEqual(workingIssuesOf(shape, { ...w, across: { x: 70, z: 300 }, cavity: null }).words, [], 'no inside, no walls to fit')
+  const next = applyFigureAuthoring(tray, { kind: 'set-section', part: 't', across: { x: 600, z: 400 }, cavity: thick })
+  const t = (compileFigureAsset(next).evaluate().geometry.find(g => (g as { id: string }).id === 't') as unknown as { shape: FigureEvaluatedShape }).shape
+  assert.deepEqual(t.cavity!.wall, thick.wall)
+  /* The drawing in the editor is the panel's, its commands kept in the editor as working state, sent with the widths. */
+  has(editorPanel, /<figure-cavity-drawing\s+\.body=\$\{\{ id: this\.body!\.id, shape \}\}/)
+  has(editorPanel, /@command=\$\{\(ev: CustomEvent\) => \{\s*ev\.stopPropagation\(\)\s*const c = this\.cavityOf\(ev\.detail\.action\)\s*if \(c\) this\.change\(\{ \.\.\.this\.working, cavity: c \}\)/)
+  has(editorPanel, /\.\.\.\(cavityMoved \? \{ cavity: w\.cavity \? \{ wall: \{ \.\.\.w\.cavity\.wall \}, start: w\.cavity\.start, end: w\.cavity\.end \} : null \} : \{\}\)/, 'only when changed')
+  has(editorPanel, /private get hollowable\(\) \{\s*return !!this\.body\?\.shape\.extrusion && \(this\.kind === 'rectangle' \|\| this\.kind === 'ellipse'\)/, 'no inside for a drawn section')
+})
+
 test('길이를 바꿀 때 남는 면은 부품의 관계가 정한 것을 읽어 보여 준다 (§4.1) — 다른 값을 따르는 치수는 칸을 막는다', () => {
   has(editor, /const kept = figureScaleAnchorOf\(asset, this\.selected\)\?\.\[drawn\.axis\]/)
   has(editorPanel, /m\?\.\[this\.axis\] === 'linked' \? linked : this\.keptWords\(\)/)

package/test/section-panel.test.ts

@@ -30,6 +30,8 @@ const read = (path: string) => readFileSync(fileURLToPath(new URL(path, import.m
 const has = (source: string, re: RegExp, message?: string) => assert.ok(re.test(source), message ?? `missing: ${re}`)
 const hasNot = (source: string, re: RegExp, message?: string) => assert.ok(!re.test(source), message ?? `present: ${re}`)
 const panel = read('../client/modeller/figure-section-panel.ts')
+/* The inside is drawn and typed in its own element (user 2026-10-01): its words and limits are read there. */
+const drawing = read('../client/modeller/figure-cavity-drawing.ts')
 const editor = read('../client/modeller/editor.ts')
 const ko = JSON.parse(read('../translations/ko.json')) as Record<string, string>
 
@@ -92,7 +94,7 @@ test('편집기는 단면 칸의 명령을 세션의 이력 하나로 돌리고,
   has(editor, /private linkCommand\(action: FigureAuthoringAction\) \{\s*\/\*[^*]*\*\/\s*this\.holdAction\(null\)/, 'a command sent lets go of the one in hand')
   for (const lang of ['ko', 'en', 'ja', 'zh', 'ms']) {
     const words = JSON.parse(read(`../translations/${lang}.json`)) as Record<string, string>
-    const used = [...new Set([...panel.matchAll(/'(figure\.(?:label|text)\.section-[\w-]+|figure\.label\.group-section)'/g)].map(m => m[1]!))]
+    const used = [...new Set([...(panel + drawing).matchAll(/'(figure\.(?:label|text)\.section-[\w-]+|figure\.label\.group-section)'/g)].map(m => m[1]!))]
     /* The keys the panel builds: each result, and the wall's and the ends' over-limit words. */
     used.push(...['pipe', 'container', 'sealed'].map(r => `figure.label.section-result-${r}`), 'figure.text.section-wall-over', 'figure.text.section-ends-over')
     assert.ok(used.length >= 16)
@@ -150,7 +152,7 @@ test('치는 동안의 값은 사본에 그려지고 원본은 그대로다 —
 
 test('다각 단면에는 속 공간을 만들 수 없다고 그 자리에서 말한다', () => {
   /* A drawn section has no inside control at all, rather than a line saying it cannot have one (user 2026-10-01). */
-  has(panel, /kind === 'rectangle' \|\| kind === 'ellipse' \? this\.renderCavity\(body, e\.axis\) : nothing/)
+  has(panel, /kind === 'rectangle' \|\| kind === 'ellipse' \? this\.renderCavity\(body\) : nothing/)
 })
 
 test('붙어 있는 것이 기대는 면을 없애는 편집은 거절되고, 그 면을 사람의 말로 부른다', () => {
@@ -191,5 +193,5 @@ test('한 면의 벽 한도는 그 방향의 너비에서 맞은편 벽을 뺀
   /* The kernel agrees: just under takes, the limit refuses. */
   assert.equal(cavityRefusalOf(shape, cavityRequestOf(shape, { wall: { ...walls, 'x-': 359 } })), null)
   assert.equal(cavityRefusalOf(shape, cavityRequestOf(shape, { wall: { ...walls, 'x-': 360 } }))!.code, 'wall-too-thick')
-  has(panel, /sideWallLimitOf\(body\.shape, cavity\.wall, side\)/)
+  has(drawing, /this\.perSide && side \? mm\(sideWallLimitOf\(this\.body!\.shape, w\.wall, side\)\) : ask\.max/)
 })

package/translations/en.json

@@ -116,6 +116,7 @@
   "figure.label.clips": "animation (plays over time)",
   "figure.label.coordinate-ground": "coordinate ground",
   "figure.label.detail-L": "detailed",
+  "figure.label.detail-XL": "fine",
   "figure.label.detail-M": "normal",
   "figure.label.detail-S": "simple",
   "figure.label.detail-level": "detail level",
@@ -398,7 +399,7 @@
   "figure.text.coordinate-ground-explained": "draws the origin and a grid on the floor",
   "figure.text.delete-figure-confirm": "delete {name}? drawings already using this type will no longer find it.",
   "figure.text.designate-in-properties": "nothing designated yet. select a part and set its role in the properties tab.",
-  "figure.text.detail-level-explained": "S for signs and posts, M for most equipment, L for the large equipment a view centres on. the level sets the part limit.",
+  "figure.text.detail-level-explained": "S for signs and posts, M for most equipment, L for the large equipment a view centres on, XL for a mechanism of many joints such as a legged robot. the level sets the part limit.",
   "figure.text.discard-changes-and-start-new": "there are unsaved changes. discard them and start a new figure?",
   "figure.text.leave-without-saving": "there are unsaved changes. discard them and leave?",
   "figure.button.leave-without-saving": "discard and leave",
@@ -467,7 +468,6 @@
   "figure.text.nothing-released-yet": "nothing released yet.",
   "figure.text.on-by-default-explained": "the starting state when placed on a drawing. a value set on the instance takes priority.",
   "figure.text.other-segment-count": "enter a value",
-  "figure.text.palette-purpose-explained": "choose the color role this part plays on screen.",
   "figure.text.part-limit-reached": "the detail level allows no more parts — raise the level or remove a part.",
   "figure.text.part-limit-reached-short": "level {level} allows {limit} parts. raise the level or remove a part.",
   "figure.text.part-name-cannot-be-empty": "give the part a name.",
@@ -535,7 +535,6 @@
   "figure.label.target-face": "target face",
   "figure.label.stands-on-plane": "stand on the mounting plane",
   "figure.label.facing-meet": "faces meet",
-  "figure.label.facing-flush": "same plane",
   "figure.text.overhang-out": "It comes past the edge of {on}'s {face}: {sides}. This is apart from the figure's room.",
   "figure.text.overhang-larger": "Wider than {on}'s {face}, it comes past its edges: {sides}.",
   "figure.text.overhang-lopsided": "It sits off to one side along {axes}.",
@@ -561,11 +560,6 @@
   "figure.text.target-would-loop": "{part} — attached to {mine}, cannot be chosen",
   "figure.label.fasten-detail": "Details",
   "figure.label.facing": "How faces meet",
-  "figure.text.fasten-summary-default": "Defaults (meeting · centred · gap 0 · twist 0)",
-  "figure.text.fasten-summary-edge-min": "{axis} lower edge",
-  "figure.text.fasten-summary-edge-max": "{axis} upper edge",
-  "figure.text.fasten-summary-off-centre": "{axis} {mm} mm off centre",
-  "figure.text.fasten-summary-follows": "{axis} follows a value",
   "figure.text.fasten-summary-gap": "gap {mm} mm",
   "figure.text.fasten-summary-twist": "twist {degrees}°",
   "figure.label.gap": "gap (mm)",
@@ -661,7 +655,6 @@
   "figure.label.clip": "Clip",
   "figure.label.new-clip": "New clip",
   "figure.button.add-track": "Add",
-  "figure.text.add-a-shape-to-start": "Add a shape to start modelling.",
   "figure.label.primitive-frustum": "Cone",
   "figure.label.primitive-plate": "Plate",
   "figure.label.field-width": "Width",
@@ -882,7 +875,6 @@
   "figure.label.target-part-placeholder": "Choose a part",
   "figure.text.fasten-target-first": "Choose the part to attach to first.",
   "figure.text.fasten-edit-on-plane": "This part is connected to the model's placement reference. Detach it before attaching it to another part.",
-  "figure.button.fasten-update": "Update this attachment",
   "figure.button.align-to-floor": "set on the floor",
   "figure.button.align-to-ceiling": "up to the ceiling",
   "figure.button.align-to-wall": "back to the wall",

package/translations/ja.json

@@ -116,6 +116,7 @@
   "figure.label.clips": "アニメーション (時間に沿って再生)",
   "figure.label.coordinate-ground": "coordinate ground",
   "figure.label.detail-L": "detailed",
+  "figure.label.detail-XL": "fine",
   "figure.label.detail-M": "normal",
   "figure.label.detail-S": "simple",
   "figure.label.detail-level": "detail level",
@@ -398,7 +399,7 @@
   "figure.text.coordinate-ground-explained": "原点と目盛りを床に表示します",
   "figure.text.delete-figure-confirm": "delete {name}? drawings already using this type will no longer find it.",
   "figure.text.designate-in-properties": "まだ指定された部品がありません。部品を選び、プロパティタブで「能力での役割」を指定してください。",
-  "figure.text.detail-level-explained": "S は標識・柱、M はほとんどの設備、L は画面の中心となる大きな設備に使います。等級で部品数の上限が決まります。",
+  "figure.text.detail-level-explained": "S は標識・柱、M はほとんどの設備、L は画面の中心となる大きな設備、XL は脚のあるロボットのように関節の多い装置に使います。等級で部品数の上限が決まります。",
   "figure.text.discard-changes-and-start-new": "保存していない変更があります。破棄して新しく始めますか？",
   "figure.text.leave-without-saving": "保存していない変更があります。破棄して移動しますか?",
   "figure.button.leave-without-saving": "破棄して移動",
@@ -467,7 +468,6 @@
   "figure.text.nothing-released-yet": "まだ発行したバージョンがありません。",
   "figure.text.on-by-default-explained": "図面に置いたときの最初の状態です。インスタンスで切り替えた値が優先されます。",
   "figure.text.other-segment-count": "enter a value",
-  "figure.text.palette-purpose-explained": "この部品が画面で担う色の役割を選びます。",
   "figure.text.part-limit-reached": "the detail level allows no more parts — raise the level or remove a part.",
   "figure.text.part-limit-reached-short": "level {level} allows {limit} parts. Raise the level or remove a part.",
   "figure.text.part-name-cannot-be-empty": "部品に名前を付けてください。",
@@ -535,7 +535,6 @@
   "figure.label.target-face": "target face",
   "figure.label.stands-on-plane": "stand on the mounting plane",
   "figure.label.facing-meet": "faces meet",
-  "figure.label.facing-flush": "same plane",
   "figure.text.overhang-out": "{on} の {face} の縁から出ています: {sides}。モデルの占有空間とは別に扱います。",
   "figure.text.overhang-larger": "{on} の {face} より広いため縁から出ています: {sides}。",
   "figure.text.overhang-lopsided": "{axes} 方向で片側に寄っています。",
@@ -561,11 +560,6 @@
   "figure.text.target-would-loop": "{part} — {mine} に取り付いているため選べません",
   "figure.label.fasten-detail": "詳細",
   "figure.label.facing": "接し方",
-  "figure.text.fasten-summary-default": "既定値(接する · 中央 · 間隔 0 · ひねり 0)",
-  "figure.text.fasten-summary-edge-min": "{axis} 低い側の縁",
-  "figure.text.fasten-summary-edge-max": "{axis} 高い側の縁",
-  "figure.text.fasten-summary-off-centre": "{axis} 中央から {mm} mm",
-  "figure.text.fasten-summary-follows": "{axis} 値に従う",
   "figure.text.fasten-summary-gap": "間隔 {mm} mm",
   "figure.text.fasten-summary-twist": "ひねり {degrees}°",
   "figure.label.gap": "gap (mm)",
@@ -661,7 +655,6 @@
   "figure.label.clip": "クリップ",
   "figure.label.new-clip": "新しいクリップ",
   "figure.button.add-track": "追加",
-  "figure.text.add-a-shape-to-start": "図形を追加してモデリングを始めましょう。",
   "figure.label.primitive-frustum": "円錐",
   "figure.label.primitive-plate": "板",
   "figure.label.field-width": "幅",
@@ -882,7 +875,6 @@
   "figure.label.target-part-placeholder": "取り付ける部品を選択",
   "figure.text.fasten-target-first": "先に取り付ける部品を選んでください。",
   "figure.text.fasten-edit-on-plane": "この部品はモデルの設置基準に接続されています。別の部品に取り付ける前に外してください。",
-  "figure.button.fasten-update": "この取り付けを更新",
   "figure.button.align-to-floor": "床に合わせる",
   "figure.button.align-to-ceiling": "天井に合わせる",
   "figure.button.align-to-wall": "壁に合わせる",

package/translations/ko.json

@@ -116,6 +116,7 @@
   "figure.label.clips": "애니메이션 (시간에 따라 재생)",
   "figure.label.coordinate-ground": "좌표 바탕",
   "figure.label.detail-L": "상세",
+  "figure.label.detail-XL": "정밀",
   "figure.label.detail-M": "보통",
   "figure.label.detail-S": "단순",
   "figure.label.detail-level": "디테일 등급",
@@ -398,7 +399,7 @@
   "figure.text.coordinate-ground-explained": "원점과 눈금을 바닥에 표시합니다",
   "figure.text.delete-figure-confirm": "{name} 을 삭제하시겠습니까? 이 타입을 쓰고 있는 도면은 더 이상 찾지 못합니다.",
   "figure.text.designate-in-properties": "아직 지정된 부품이 없습니다. 부품을 선택하고 속성 탭에서 「능력에서의 역할」을 지정하세요.",
-  "figure.text.detail-level-explained": "S 는 표지·기둥, M 은 대부분의 설비, L 은 화면의 중심이 되는 큰 설비에 씁니다. 등급에 따라 부품 수 한도가 정해집니다.",
+  "figure.text.detail-level-explained": "S 는 표지·기둥, M 은 대부분의 설비, L 은 화면의 중심이 되는 큰 설비, XL 은 다리 달린 로봇처럼 관절이 많은 장치에 씁니다. 등급에 따라 부품 수 한도가 정해집니다.",
   "figure.text.discard-changes-and-start-new": "저장하지 않은 변경이 있습니다. 버리고 새로 시작할까요?",
   "figure.text.leave-without-saving": "저장하지 않은 변경이 있습니다. 버리고 나갈까요?",
   "figure.button.leave-without-saving": "버리고 나가기",
@@ -467,7 +468,6 @@
   "figure.text.nothing-released-yet": "아직 발행한 버전이 없습니다.",
   "figure.text.on-by-default-explained": "도면에 놓았을 때의 처음 상태입니다. 인스턴스에서 켜고 끈 값이 우선합니다.",
   "figure.text.other-segment-count": "직접 입력",
-  "figure.text.palette-purpose-explained": "이 부품이 화면에서 맡을 색 역할을 고릅니다.",
   "figure.text.part-limit-reached": "디테일 등급이 허용하는 부품 수를 모두 사용했습니다. 등급을 올리거나 부품을 삭제하세요.",
   "figure.text.part-limit-reached-short": "{level} 등급은 부품 {limit}개까지입니다. 등급을 올리거나 부품을 삭제하세요.",
   "figure.text.part-name-cannot-be-empty": "부품 이름을 입력해 주세요.",
@@ -535,7 +535,6 @@
   "figure.label.target-face": "상대 면",
   "figure.label.stands-on-plane": "장착 평면에 세우기",
   "figure.label.facing-meet": "맞닿게",
-  "figure.label.facing-flush": "같은 평면에",
   "figure.text.overhang-out": "{on}의 {face} 가장자리 밖으로 나와 있습니다: {sides}. 모델의 점유 공간과는 따로 봅니다.",
   "figure.text.overhang-larger": "{on}의 {face}보다 넓어 가장자리 밖으로 나와 있습니다: {sides}.",
   "figure.text.overhang-lopsided": "{axes} 방향으로 한쪽에 치우쳐 있습니다.",
@@ -561,11 +560,6 @@
   "figure.text.target-would-loop": "{part} — {mine}에 붙어 있어 고를 수 없음",
   "figure.label.fasten-detail": "세부",
   "figure.label.facing": "닿는 방식",
-  "figure.text.fasten-summary-default": "기본값 (맞닿게 · 가운데 · 간격 0 · 비틀기 0)",
-  "figure.text.fasten-summary-edge-min": "{axis} 낮은 쪽 모서리",
-  "figure.text.fasten-summary-edge-max": "{axis} 높은 쪽 모서리",
-  "figure.text.fasten-summary-off-centre": "{axis} 가운데서 {mm} mm",
-  "figure.text.fasten-summary-follows": "{axis} 값을 따름",
   "figure.text.fasten-summary-gap": "간격 {mm} mm",
   "figure.text.fasten-summary-twist": "비틀기 {degrees}°",
   "figure.label.gap": "간격 (mm)",
@@ -661,7 +655,6 @@
   "figure.label.clip": "클립",
   "figure.label.new-clip": "새 클립",
   "figure.button.add-track": "재생 추가",
-  "figure.text.add-a-shape-to-start": "도형을 추가해 모델링을 시작하세요.",
   "figure.label.primitive-frustum": "원뿔",
   "figure.label.primitive-plate": "판",
   "figure.label.field-width": "너비",
@@ -882,7 +875,6 @@
   "figure.label.target-part-placeholder": "붙일 부품 선택",
   "figure.text.fasten-target-first": "먼저 붙일 부품을 고르세요.",
   "figure.text.fasten-edit-on-plane": "이 부품은 현재 모델의 설치 기준면에 연결되어 있습니다. 다른 부품에 붙이려면 먼저 붙임을 푸세요.",
-  "figure.button.fasten-update": "이 붙임 수정",
   "figure.button.align-to-floor": "바닥에 내려놓기",
   "figure.button.align-to-ceiling": "천장에 대기",
   "figure.button.align-to-wall": "벽에 대기",

package/translations/ms.json

@@ -116,6 +116,7 @@
   "figure.label.clips": "animasi (dimainkan mengikut masa)",
   "figure.label.coordinate-ground": "coordinate ground",
   "figure.label.detail-L": "detailed",
+  "figure.label.detail-XL": "fine",
   "figure.label.detail-M": "normal",
   "figure.label.detail-S": "simple",
   "figure.label.detail-level": "detail level",
@@ -398,7 +399,7 @@
   "figure.text.coordinate-ground-explained": "melukis asalan dan grid pada lantai",
   "figure.text.delete-figure-confirm": "delete {name}? drawings already using this type will no longer find it.",
   "figure.text.designate-in-properties": "belum ada yang ditetapkan. pilih bahagian dan tetapkan peranannya dalam tab sifat.",
-  "figure.text.detail-level-explained": "S untuk papan tanda dan tiang, M untuk kebanyakan peralatan, L untuk peralatan besar yang menjadi tumpuan. tahap menentukan had bahagian.",
+  "figure.text.detail-level-explained": "S untuk papan tanda dan tiang, M untuk kebanyakan peralatan, L untuk peralatan besar yang menjadi tumpuan, XL untuk mekanisme banyak sendi seperti robot berkaki. tahap menentukan had bahagian.",
   "figure.text.discard-changes-and-start-new": "ada perubahan belum disimpan. buang dan mulakan yang baharu?",
   "figure.text.leave-without-saving": "ada perubahan yang belum disimpan. buang dan keluar?",
   "figure.button.leave-without-saving": "buang dan keluar",
@@ -467,7 +468,6 @@
   "figure.text.nothing-released-yet": "belum ada yang diterbitkan.",
   "figure.text.on-by-default-explained": "keadaan permulaan apabila diletakkan pada lukisan. nilai yang ditetapkan pada instans diutamakan.",
   "figure.text.other-segment-count": "enter a value",
-  "figure.text.palette-purpose-explained": "pilih peranan warna yang dimainkan bahagian ini pada skrin.",
   "figure.text.part-limit-reached": "the detail level allows no more parts — raise the level or remove a part.",
   "figure.text.part-limit-reached-short": "level {level} allows {limit} parts. Raise the level or remove a part.",
   "figure.text.part-name-cannot-be-empty": "beri nama kepada bahagian.",
@@ -535,7 +535,6 @@
   "figure.label.target-face": "target face",
   "figure.label.stands-on-plane": "stand on the mounting plane",
   "figure.label.facing-meet": "faces meet",
-  "figure.label.facing-flush": "same plane",
   "figure.text.overhang-out": "Ia terkeluar melepasi tepi {face} {on}: {sides}. Ini berasingan daripada ruang rajah.",
   "figure.text.overhang-larger": "Lebih lebar daripada {face} {on}, ia melepasi tepinya: {sides}.",
   "figure.text.overhang-lopsided": "Ia terletak ke satu sisi sepanjang {axes}.",
@@ -561,11 +560,6 @@
   "figure.text.target-would-loop": "{part} — dilekatkan pada {mine}, tidak boleh dipilih",
   "figure.label.fasten-detail": "Butiran",
   "figure.label.facing": "Cara muka bertemu",
-  "figure.text.fasten-summary-default": "Lalai (bertemu · tengah · jarak 0 · pulasan 0)",
-  "figure.text.fasten-summary-edge-min": "{axis} tepi bawah",
-  "figure.text.fasten-summary-edge-max": "{axis} tepi atas",
-  "figure.text.fasten-summary-off-centre": "{axis} {mm} mm dari tengah",
-  "figure.text.fasten-summary-follows": "{axis} mengikut nilai",
   "figure.text.fasten-summary-gap": "jarak {mm} mm",
   "figure.text.fasten-summary-twist": "pulasan {degrees}°",
   "figure.label.gap": "gap (mm)",
@@ -661,7 +655,6 @@
   "figure.label.clip": "Klip",
   "figure.label.new-clip": "Klip baharu",
   "figure.button.add-track": "Tambah",
-  "figure.text.add-a-shape-to-start": "Tambah bentuk untuk mula memodel.",
   "figure.label.primitive-frustum": "Kon",
   "figure.label.primitive-plate": "Plat",
   "figure.label.field-width": "Lebar",
@@ -882,7 +875,6 @@
   "figure.label.target-part-placeholder": "Pilih bahagian",
   "figure.text.fasten-target-first": "Pilih bahagian yang hendak dilekatkan dahulu.",
   "figure.text.fasten-edit-on-plane": "Bahagian ini disambungkan kepada rujukan peletakan model. Tanggalkan dahulu sebelum melekatkannya pada bahagian lain.",
-  "figure.button.fasten-update": "Kemas kini lekatan ini",
   "figure.button.align-to-floor": "Jajarkan ke lantai",
   "figure.button.align-to-ceiling": "Jajarkan ke siling",
   "figure.button.align-to-wall": "Jajarkan ke dinding",

package/translations/zh.json

@@ -116,6 +116,7 @@
   "figure.label.clips": "动画 (随时间播放)",
   "figure.label.coordinate-ground": "coordinate ground",
   "figure.label.detail-L": "detailed",
+  "figure.label.detail-XL": "fine",
   "figure.label.detail-M": "normal",
   "figure.label.detail-S": "simple",
   "figure.label.detail-level": "detail level",
@@ -398,7 +399,7 @@
   "figure.text.coordinate-ground-explained": "在地面显示原点和网格",
   "figure.text.delete-figure-confirm": "delete {name}? drawings already using this type will no longer find it.",
   "figure.text.designate-in-properties": "还没有指定部件。请选择部件，在属性标签页中设置「在能力中的角色」。",
-  "figure.text.detail-level-explained": "S 用于标志和立柱，M 用于大多数设备，L 用于作为画面中心的大型设备。等级决定部件数量上限。",
+  "figure.text.detail-level-explained": "S 用于标志和立柱，M 用于大多数设备，L 用于作为画面中心的大型设备，XL 用于腿式机器人等关节众多的装置。等级决定部件数量上限。",
   "figure.text.discard-changes-and-start-new": "有未保存的更改。放弃并新建吗？",
   "figure.text.leave-without-saving": "有未保存的更改。放弃并离开吗?",
   "figure.button.leave-without-saving": "放弃并离开",
@@ -467,7 +468,6 @@
   "figure.text.nothing-released-yet": "还没有已发布的版本。",
   "figure.text.on-by-default-explained": "放置到图面时的初始状态。实例上设置的值优先。",
   "figure.text.other-segment-count": "enter a value",
-  "figure.text.palette-purpose-explained": "选择此部件在画面上承担的颜色角色。",
   "figure.text.part-limit-reached": "the detail level allows no more parts — raise the level or remove a part.",
   "figure.text.part-limit-reached-short": "level {level} allows {limit} parts. Raise the level or remove a part.",
   "figure.text.part-name-cannot-be-empty": "请为部件命名。",
@@ -535,7 +535,6 @@
   "figure.label.target-face": "target face",
   "figure.label.stands-on-plane": "stand on the mounting plane",
   "figure.label.facing-meet": "faces meet",
-  "figure.label.facing-flush": "same plane",
   "figure.text.overhang-out": "超出了 {on} 的 {face} 边缘:{sides}。这与模型的占用空间分开看待。",
   "figure.text.overhang-larger": "比 {on} 的 {face} 宽,超出边缘:{sides}。",
   "figure.text.overhang-lopsided": "沿 {axes} 偏向一侧。",
@@ -561,11 +560,6 @@
   "figure.text.target-would-loop": "{part} — 已附着于 {mine},无法选择",
   "figure.label.fasten-detail": "详细",
   "figure.label.facing": "接触方式",
-  "figure.text.fasten-summary-default": "默认值(贴合 · 居中 · 间距 0 · 扭转 0)",
-  "figure.text.fasten-summary-edge-min": "{axis} 低侧边缘",
-  "figure.text.fasten-summary-edge-max": "{axis} 高侧边缘",
-  "figure.text.fasten-summary-off-centre": "{axis} 距中心 {mm} mm",
-  "figure.text.fasten-summary-follows": "{axis} 跟随数值",
   "figure.text.fasten-summary-gap": "间距 {mm} mm",
   "figure.text.fasten-summary-twist": "扭转 {degrees}°",
   "figure.label.gap": "gap (mm)",
@@ -661,7 +655,6 @@
   "figure.label.clip": "片段",
   "figure.label.new-clip": "新片段",
   "figure.button.add-track": "添加",
-  "figure.text.add-a-shape-to-start": "添加一个形状开始建模。",
   "figure.label.primitive-frustum": "圆锥",
   "figure.label.primitive-plate": "板",
   "figure.label.field-width": "宽度",
@@ -882,7 +875,6 @@
   "figure.label.target-part-placeholder": "选择部件",
   "figure.text.fasten-target-first": "请先选择要附着的部件。",
   "figure.text.fasten-edit-on-plane": "此部件当前连接到模型的安装基准。附着到另一部件前请先解除连接。",
-  "figure.button.fasten-update": "更新此附着",
   "figure.button.align-to-floor": "对齐地面",
   "figure.button.align-to-ceiling": "对齐天花板",
   "figure.button.align-to-wall": "对齐墙面",