@tencent-rtc/mcp 1.6.4 → 1.6.6

package/resource/knowledge/trtc/c++/TXLiteAVCode.md

@@ -48,18 +48,18 @@
 | ERR_UNSUPPORTED_SAMPLERATE | -1306 | Unsupported audio sample rate. |
 | ERR_SYSTEM_LOOPBACK_START_FAILED | -1307 | System audio loopback startup encountered an error. Common error reasons and solutions are: 1. The current system version does not support the include or excluded specified process loopback function, which requires Windows system version 10.0.19042 (20H2) or higher. For x64 specified path loopback function, it also requires Windows system version 10.0.19042 (20H2) or higher. Please check the current system version. 2. Invalid input parameters (including empty parameters, non-existent input paths, non-existent process IDs, and non-existent device names). Please check whether the input parameters are legal. 3. No available speaker device, please check whether it is available. |
 | ERR_SYSTEM_LOOPBACK_THIRD_PARTY_APP_EXIT | -1324 | The third party app loopback capture encountered an error. This error occurred after the third party app loopback was successfully started. During the sound collection process, the specified process or application unexpectedly exited. Please check the status of the specified process or application and try again by re-entering the process number |
-| ERR_TRTC_ENTER_ROOM_FAILED | -3301 | Failed to enter the room. For the reason, refer to the error message for -3301 in <code> onError </code>. |
+| ERR_TRTC_ENTER_ROOM_FAILED | -3301 | Failed to enter the room. For the reason, refer to the error message for -3301 in  <code>onError</code> . |
 | ERR_TRTC_REQUEST_IP_TIMEOUT | -3307 | IP and signature request timed out. Check your network connection and whether your firewall allows UDP.<br>Try visiting the IP address 162.14.22.165:8000 or 162.14.6.105:8000 and the domain default-query.trtc.tencent-cloud.com:8000. |
 | ERR_TRTC_CONNECT_SERVER_TIMEOUT | -3308 | Room entry request timed out. Check your network connection and whether VPN is used. You can also switch to 4G to run a test. |
-| ERR_TRTC_ROOM_PARAM_NULL | -3316 | Empty room entry parameters. Please check whether valid parameters were passed in to the <code> enterRoom:appScene: </code> API. |
-| ERR_TRTC_INVALID_SDK_APPID | -3317 | Incorrect room entry parameter. Check whether <code> TRTCParams.sdkAppId </code> is empty. |
-| ERR_TRTC_INVALID_ROOM_ID | -3318 | Incorrect room entry parameter. Check whether <code> TRTCParams.roomId </code> or <code> TRTCParams.strRoomId </code> is empty. Note that you cannot set both parameters. |
-| ERR_TRTC_INVALID_USER_ID | -3319 | Incorrect room entry parameter. Check whether <code> TRTCParams.userId </code> is empty. |
-| ERR_TRTC_INVALID_USER_SIG | -3320 | Incorrect room entry parameter. Check whether <code> TRTCParams.userSig </code> is empty. |
-| ERR_TRTC_ENTER_ROOM_REFUSED | -3340 | Request to enter room denied. Check whether you called <code> enterRoom </code> twice to enter the same room. |
-| ERR_TRTC_INVALID_PRIVATE_MAPKEY | -100006 | Advanced permission control is enabled but failed to verify <code> TRTCParams.privateMapKey </code>.<br>For details, see <a href="https://intl.cloud.tencent.com/document/product/647/35157">Enabling Advanced Permission Control</a>. |
+| ERR_TRTC_ROOM_PARAM_NULL | -3316 | Empty room entry parameters. Please check whether valid parameters were passed in to the  <code>enterRoom:appScene:</code>  API. |
+| ERR_TRTC_INVALID_SDK_APPID | -3317 | Incorrect room entry parameter. Check whether  <code>TRTCParams.sdkAppId</code>  is empty. |
+| ERR_TRTC_INVALID_ROOM_ID | -3318 | Incorrect room entry parameter. Check whether  <code>TRTCParams.roomId</code>  or  <code>TRTCParams.strRoomId</code>  is empty. Note that you cannot set both parameters. |
+| ERR_TRTC_INVALID_USER_ID | -3319 | Incorrect room entry parameter. Check whether  <code>TRTCParams.userId</code>  is empty. |
+| ERR_TRTC_INVALID_USER_SIG | -3320 | Incorrect room entry parameter. Check whether  <code>TRTCParams.userSig</code>  is empty. |
+| ERR_TRTC_ENTER_ROOM_REFUSED | -3340 | Request to enter room denied. Check whether you called  <code>enterRoom</code>  twice to enter the same room. |
+| ERR_TRTC_INVALID_PRIVATE_MAPKEY | -100006 | Advanced permission control is enabled but failed to verify  <code>TRTCParams.privateMapKey</code> .<br>For details, see <a href="https://intl.cloud.tencent.com/document/product/647/35157">Enabling Advanced Permission Control</a>. |
 | ERR_TRTC_SERVICE_SUSPENDED | -100013 | The service is unavailable. Check if you have used up your package or whether your Tencent Cloud account has overdue payments. |
-| ERR_TRTC_USER_SIG_CHECK_FAILED | -100018 | Failed to verify <code> UserSig </code>. Check whether <code> TRTCParams.userSig </code> is correct or valid.<br>For details, see <a href="https://intl.cloud.tencent.com/document/product/647/39074">UserSig Generation and Verification</a>. |
+| ERR_TRTC_USER_SIG_CHECK_FAILED | -100018 | Failed to verify  <code>UserSig</code> . Check whether  <code>TRTCParams.userSig</code>  is correct or valid.<br>For details, see <a href="https://intl.cloud.tencent.com/document/product/647/39074">UserSig Generation and Verification</a>. |
 | ERR_TRTC_PUSH_THIRD_PARTY_CLOUD_TIMEOUT | -3321 | The relay to CDN request timed out |
 | ERR_TRTC_MIX_TRANSCODING_TIMEOUT | -3322 | The On-Cloud MixTranscoding request timed out. |
 | ERR_TRTC_PUSH_THIRD_PARTY_CLOUD_FAILED | -3323 | Abnormal response packets for relay. |
@@ -71,7 +71,7 @@
 | ERR_TRTC_CONNECT_OTHER_ROOM_TIMEOUT | -3326 | The co-anchoring request timed out. |
 | ERR_TRTC_DISCONNECT_OTHER_ROOM_TIMEOUT | -3327 | The request to stop co-anchoring timed out. |
 | ERR_TRTC_CONNECT_OTHER_ROOM_INVALID_PARAMETER | -3328 | Invalid parameter. |
-| ERR_TRTC_CONNECT_OTHER_ROOM_AS_AUDIENCE | -3330 | The current user is an audience member and cannot request or stop cross-room communication. Please call <code> switchRole </code> to switch to an anchor first. |
+| ERR_TRTC_CONNECT_OTHER_ROOM_AS_AUDIENCE | -3330 | The current user is an audience member and cannot request or stop cross-room communication. Please call  <code>switchRole</code>  to switch to an anchor first. |
 | ERR_BGM_OPEN_FAILED | -4001 | Failed to open the file, such as invalid data found when processing input, ffmpeg protocol not found, etc. |
 | ERR_BGM_DECODE_FAILED | -4002 | Audio file decoding failed. |
 | ERR_BGM_OVER_LIMIT | -4003 | The number exceeds the limit, such as preloading two background music at the same time. |
@@ -88,7 +88,7 @@
 | Enum | Value | DESC |
 | --- | --- | --- |
 | WARNING_HW_ENCODER_START_FAIL | 1103 | Failed to start the hardware encoder. Switched to software encoding. |
-| WARNING_CURRENT_ENCODE_TYPE_CHANGED | 1104 | The codec changed.<br>The additional field <code> type </code> in <code> onWarning </code> indicates the codec currently in use. <code> 0 </code> indicates H.264, and <code> 1 </code> indicates H.265.<br>The additional field <code> hardware </code> in <code> onWarning </code> indicates the encoder type currently in use. <code> 0 </code> indicates software encoder, and <code> 1 </code> indicates hardware encoder.<br>The additional field <code> stream </code> in <code> onWarning </code> indicates the stream type currently in use. <code> 0 </code> indicates big stream, and <code> 1 </code> indicates small stream, and <code> 2 </code> indicates sub stream. |
+| WARNING_CURRENT_ENCODE_TYPE_CHANGED | 1104 | The codec changed.<br>The additional field  <code>type</code>  in  <code>onWarning</code>  indicates the codec currently in use.  <code>0</code>  indicates H.264, and  <code>1</code>  indicates H.265.<br>The additional field  <code>hardware</code>  in  <code>onWarning</code>  indicates the encoder type currently in use.  <code>0</code>  indicates software encoder, and  <code>1</code>  indicates hardware encoder.<br>The additional field  <code>stream</code>  in  <code>onWarning</code>  indicates the stream type currently in use.  <code>0</code>  indicates big stream, and  <code>1</code>  indicates small stream, and  <code>2</code>  indicates sub stream. |
 | WARNING_VIDEO_ENCODER_SW_TO_HW | 1107 | Insufficient CPU for software encoding. Switched to hardware encoding. |
 | WARNING_INSUFFICIENT_CAPTURE_FPS | 1108 | The capturing frame rate of the camera is insufficient. This error occurs on some Android phones with built-in beauty filters. |
 | WARNING_SW_ENCODER_START_FAIL | 1109 | Failed to start the software encoder. |
@@ -102,7 +102,7 @@
 | WARNING_CAMERA_START_FAILED | 1117 | The camera is started failed. |
 | WARNING_CAMERA_SERVER_DIED | 1118 | The camera sever is died. |
 | WARNING_SCREEN_CAPTURE_NOT_AUTHORIZED | 1206 | The user didn’t grant the application screen recording permission. |
-| WARNING_CURRENT_DECODE_TYPE_CHANGED | 2008 | The codec changed. The additional field <code> type </code> in <code> onWarning </code> indicates the codec currently in use. <code> 1 </code> indicates H.265, and <code> 0 </code> indicates H.264. This field is not supported on Windows. |
+| WARNING_CURRENT_DECODE_TYPE_CHANGED | 2008 | The codec changed. The additional field  <code>type</code>  in  <code>onWarning</code>  indicates the codec currently in use.  <code>1</code>  indicates H.265, and  <code>0</code>  indicates H.264. This field is not supported on Windows. |
 | WARNING_VIDEO_FRAME_DECODE_FAIL | 2101 | Failed to decode the current video frame. |
 | WARNING_HW_DECODER_START_FAIL | 2106 | Failed to start the hardware decoder. The software decoder is used instead. |
 | WARNING_VIDEO_DECODER_HW_TO_SW | 2108 | The hardware decoder failed to decode the first I-frame of the current stream. The SDK automatically switched to the software decoder. |