@tellahq/rescript 10.1.4-republish-1 → 10.1.4-republish-2

package/lib/ocaml/set.mli

@@ -1,266 +0,0 @@
-(**************************************************************************)
-(*                                                                        *)
-(*                                 OCaml                                  *)
-(*                                                                        *)
-(*             Xavier Leroy, projet Cristal, INRIA Rocquencourt           *)
-(*                                                                        *)
-(*   Copyright 1996 Institut National de Recherche en Informatique et     *)
-(*     en Automatique.                                                    *)
-(*                                                                        *)
-(*   All rights reserved.  This file is distributed under the terms of    *)
-(*   the GNU Lesser General Public License version 2.1, with the          *)
-(*   special exception on linking described in the file LICENSE.          *)
-(*                                                                        *)
-(**************************************************************************)
-
-(** Sets over ordered types.
-
-   This module implements the set data structure, given a total ordering
-   function over the set elements. All operations over sets
-   are purely applicative (no side-effects).
-   The implementation uses balanced binary trees, and is therefore
-   reasonably efficient: insertion and membership take time
-   logarithmic in the size of the set, for instance.
-
-   The {!Make} functor constructs implementations for any type, given a
-   [compare] function.
-   For instance:
-   {[
-     module IntPairs =
-       struct
-         type t = int * int
-         let compare (x0,y0) (x1,y1) =
-           match Pervasives.compare x0 x1 with
-               0 -> Pervasives.compare y0 y1
-             | c -> c
-       end
-
-     module PairsSet = Set.Make(IntPairs)
-
-     let m = PairsSet.(empty |> add (2,3) |> add (5,7) |> add (11,13))
-   ]}
-
-   This creates a new module [PairsSet], with a new type [PairsSet.t]
-   of sets of [int * int].
-*)
-
-module type OrderedType =
-  sig
-    type t
-      (** The type of the set elements. *)
-
-    val compare : t -> t -> int
-      (** A total ordering function over the set elements.
-          This is a two-argument function [f] such that
-          [f e1 e2] is zero if the elements [e1] and [e2] are equal,
-          [f e1 e2] is strictly negative if [e1] is smaller than [e2],
-          and [f e1 e2] is strictly positive if [e1] is greater than [e2].
-          Example: a suitable ordering function is the generic structural
-          comparison function {!Pervasives.compare}. *)
-  end
-(** Input signature of the functor {!Set.Make}. *)
-
-module type S =
-  sig
-    type elt
-    (** The type of the set elements. *)
-
-    type t
-    (** The type of sets. *)
-
-    val empty: t
-    (** The empty set. *)
-
-    val is_empty: t -> bool
-    (** Test whether a set is empty or not. *)
-
-    val mem: elt -> t -> bool
-    (** [mem x s] tests whether [x] belongs to the set [s]. *)
-
-    val add: elt -> t -> t
-    (** [add x s] returns a set containing all elements of [s],
-       plus [x]. If [x] was already in [s], [s] is returned unchanged
-       (the result of the function is then physically equal to [s]).
-       @before 4.03 Physical equality was not ensured. *)
-
-    val singleton: elt -> t
-    (** [singleton x] returns the one-element set containing only [x]. *)
-
-    val remove: elt -> t -> t
-    (** [remove x s] returns a set containing all elements of [s],
-       except [x]. If [x] was not in [s], [s] is returned unchanged
-       (the result of the function is then physically equal to [s]).
-       @before 4.03 Physical equality was not ensured. *)
-
-    val union: t -> t -> t
-    (** Set union. *)
-
-    val inter: t -> t -> t
-    (** Set intersection. *)
-
-    val diff: t -> t -> t
-    (** Set difference. *)
-
-    val compare: t -> t -> int
-    (** Total ordering between sets. Can be used as the ordering function
-       for doing sets of sets. *)
-
-    val equal: t -> t -> bool
-    (** [equal s1 s2] tests whether the sets [s1] and [s2] are
-       equal, that is, contain equal elements. *)
-
-    val subset: t -> t -> bool
-    (** [subset s1 s2] tests whether the set [s1] is a subset of
-       the set [s2]. *)
-
-    val iter: (elt -> unit) -> t -> unit
-    (** [iter f s] applies [f] in turn to all elements of [s].
-       The elements of [s] are presented to [f] in increasing order
-       with respect to the ordering over the type of the elements. *)
-
-    val map: (elt -> elt) -> t -> t
-    (** [map f s] is the set whose elements are [f a0],[f a1]... [f
-        aN], where [a0],[a1]...[aN] are the elements of [s].
-
-       The elements are passed to [f] in increasing order
-       with respect to the ordering over the type of the elements.
-
-       If no element of [s] is changed by [f], [s] is returned
-       unchanged. (If each output of [f] is physically equal to its
-       input, the returned set is physically equal to [s].)
-       @since 4.04.0 *)
-
-    val fold: (elt -> 'a -> 'a) -> t -> 'a -> 'a
-    (** [fold f s a] computes [(f xN ... (f x2 (f x1 a))...)],
-       where [x1 ... xN] are the elements of [s], in increasing order. *)
-
-    val for_all: (elt -> bool) -> t -> bool
-    (** [for_all p s] checks if all elements of the set
-       satisfy the predicate [p]. *)
-
-    val exists: (elt -> bool) -> t -> bool
-    (** [exists p s] checks if at least one element of
-       the set satisfies the predicate [p]. *)
-
-    val filter: (elt -> bool) -> t -> t
-    (** [filter p s] returns the set of all elements in [s]
-       that satisfy predicate [p]. If [p] satisfies every element in [s],
-       [s] is returned unchanged (the result of the function is then
-       physically equal to [s]).
-       @before 4.03 Physical equality was not ensured.*)
-
-    val partition: (elt -> bool) -> t -> t * t
-    (** [partition p s] returns a pair of sets [(s1, s2)], where
-       [s1] is the set of all the elements of [s] that satisfy the
-       predicate [p], and [s2] is the set of all the elements of
-       [s] that do not satisfy [p]. *)
-
-    val cardinal: t -> int
-    (** Return the number of elements of a set. *)
-
-    val elements: t -> elt list
-    (** Return the list of all elements of the given set.
-       The returned list is sorted in increasing order with respect
-       to the ordering [Ord.compare], where [Ord] is the argument
-       given to {!Set.Make}. *)
-
-    val min_elt: t -> elt
-    (** Return the smallest element of the given set
-       (with respect to the [Ord.compare] ordering), or raise
-       [Not_found] if the set is empty. *)
-
-    val min_elt_opt: t -> elt option
-    (** Return the smallest element of the given set
-       (with respect to the [Ord.compare] ordering), or [None]
-       if the set is empty.
-        @since 4.05
-    *)
-
-    val max_elt: t -> elt
-    (** Same as {!Set.S.min_elt}, but returns the largest element of the
-       given set. *)
-
-    val max_elt_opt: t -> elt option
-    (** Same as {!Set.S.min_elt_opt}, but returns the largest element of the
-        given set.
-        @since 4.05
-    *)
-
-    val choose: t -> elt
-    (** Return one element of the given set, or raise [Not_found] if
-       the set is empty. Which element is chosen is unspecified,
-       but equal elements will be chosen for equal sets. *)
-
-    val choose_opt: t -> elt option
-    (** Return one element of the given set, or [None] if
-        the set is empty. Which element is chosen is unspecified,
-        but equal elements will be chosen for equal sets.
-        @since 4.05
-    *)
-
-    val split: elt -> t -> t * bool * t
-    (** [split x s] returns a triple [(l, present, r)], where
-          [l] is the set of elements of [s] that are
-          strictly less than [x];
-          [r] is the set of elements of [s] that are
-          strictly greater than [x];
-          [present] is [false] if [s] contains no element equal to [x],
-          or [true] if [s] contains an element equal to [x]. *)
-
-    val find: elt -> t -> elt
-    (** [find x s] returns the element of [s] equal to [x] (according
-        to [Ord.compare]), or raise [Not_found] if no such element
-        exists.
-        @since 4.01.0 *)
-
-    val find_opt: elt -> t -> elt option
-    (** [find_opt x s] returns the element of [s] equal to [x] (according
-        to [Ord.compare]), or [None] if no such element
-        exists.
-        @since 4.05 *)
-
-    val find_first: (elt -> bool) -> t -> elt
-    (** [find_first f s], where [f] is a monotonically increasing function,
-       returns the lowest element [e] of [s] such that [f e],
-       or raises [Not_found] if no such element exists.
-
-       For example, [find_first (fun e -> Ord.compare e x >= 0) s] will return
-       the first element [e] of [s] where [Ord.compare e x >= 0] (intuitively:
-       [e >= x]), or raise [Not_found] if [x] is greater than any element of
-       [s].
-
-        @since 4.05
-       *)
-
-    val find_first_opt: (elt -> bool) -> t -> elt option
-    (** [find_first_opt f s], where [f] is a monotonically increasing function,
-       returns an option containing the lowest element [e] of [s] such that
-       [f e], or [None] if no such element exists.
-        @since 4.05
-       *)
-
-    val find_last: (elt -> bool) -> t -> elt
-    (** [find_last f s], where [f] is a monotonically decreasing function,
-       returns the highest element [e] of [s] such that [f e],
-       or raises [Not_found] if no such element exists.
-        @since 4.05
-       *)
-
-    val find_last_opt: (elt -> bool) -> t -> elt option
-    (** [find_last_opt f s], where [f] is a monotonically decreasing function,
-       returns an option containing the highest element [e] of [s] such that
-       [f e], or [None] if no such element exists.
-        @since 4.05
-       *)
-
-    val of_list: elt list -> t
-    (** [of_list l] creates a set from a list of elements.
-        This is usually more efficient than folding [add] over the list,
-        except perhaps for lists with many duplicated elements.
-        @since 4.02.0 *)
-  end
-(** Output signature of the functor {!Set.Make}. *)
-
-module Make (Ord : OrderedType) : S with type elt = Ord.t
-(** Functor building an implementation of the set structure
-   given a totally ordered type. *)