@tellahq/rescript 10.1.0-alpha.2 → 10.1.4-republish-2

package/lib/ocaml/list.mli

@@ -1,347 +0,0 @@
-(**************************************************************************)
-(*                                                                        *)
-(*                                 OCaml                                  *)
-(*                                                                        *)
-(*             Xavier Leroy, projet Cristal, INRIA Rocquencourt           *)
-(*                                                                        *)
-(*   Copyright 1996 Institut National de Recherche en Informatique et     *)
-(*     en Automatique.                                                    *)
-(*                                                                        *)
-(*   All rights reserved.  This file is distributed under the terms of    *)
-(*   the GNU Lesser General Public License version 2.1, with the          *)
-(*   special exception on linking described in the file LICENSE.          *)
-(*                                                                        *)
-(**************************************************************************)
-
-(** List operations.
-
-   Some functions are flagged as not tail-recursive.  A tail-recursive
-   function uses constant stack space, while a non-tail-recursive function
-   uses stack space proportional to the length of its list argument, which
-   can be a problem with very long lists.  When the function takes several
-   list arguments, an approximate formula giving stack usage (in some
-   unspecified constant unit) is shown in parentheses.
-
-   The above considerations can usually be ignored if your lists are not
-   longer than about 10000 elements.
-*)
-
-val length : 'a list -> int
-(** Return the length (number of elements) of the given list. *)
-
-val compare_lengths : 'a list -> 'b list -> int
-(** Compare the lengths of two lists. [compare_lengths l1 l2] is
-   equivalent to [compare (length l1) (length l2)], except that
-   the computation stops after itering on the shortest list.
-   @since 4.05.0
- *)
-
-val compare_length_with : 'a list -> int -> int
-(** Compare the length of a list to an integer. [compare_length_with l n] is
-   equivalent to [compare (length l) n], except that
-   the computation stops after at most [n] iterations on the list.
-   @since 4.05.0
-*)
-
-val cons : 'a -> 'a list -> 'a list
-(** [cons x xs] is [x :: xs]
-    @since 4.03.0
-*)
-
-val hd : 'a list -> 'a
-(** Return the first element of the given list. Raise
-   [Failure "hd"] if the list is empty. *)
-
-val tl : 'a list -> 'a list
-(** Return the given list without its first element. Raise
-    [Failure "tl"] if the list is empty. *)
-
-val nth: 'a list -> int -> 'a
-(** Return the [n]-th element of the given list.
-   The first element (head of the list) is at position 0.
-   Raise [Failure "nth"] if the list is too short.
-   Raise [Invalid_argument "List.nth"] if [n] is negative. *)
-
-val nth_opt: 'a list -> int -> 'a option
-(** Return the [n]-th element of the given list.
-    The first element (head of the list) is at position 0.
-    Return [None] if the list is too short.
-    Raise [Invalid_argument "List.nth"] if [n] is negative.
-    @since 4.05
-*)
-
-val rev : 'a list -> 'a list
-(** List reversal. *)
-
-val init : int -> (int -> 'a) -> 'a list
-(** [List.init len f] is [f 0; f 1; ...; f (len-1)], evaluated left to right.
-
-    @raise Invalid_argument if len < 0.
-    @since 4.06.0
-*)
-
-val append : 'a list -> 'a list -> 'a list
-(** Concatenate two lists.  Same as the infix operator [@].
-   Not tail-recursive (length of the first argument).  *)
-
-val rev_append : 'a list -> 'a list -> 'a list
-(** [List.rev_append l1 l2] reverses [l1] and concatenates it to [l2].
-   This is equivalent to {!List.rev}[ l1 @ l2], but [rev_append] is
-   tail-recursive and more efficient. *)
-
-val concat : 'a list list -> 'a list
-(** Concatenate a list of lists.  The elements of the argument are all
-   concatenated together (in the same order) to give the result.
-   Not tail-recursive
-   (length of the argument + length of the longest sub-list). *)
-
-val flatten : 'a list list -> 'a list
-(** An alias for [concat]. *)
-
-
-(** {1 Iterators} *)
-
-
-val iter : ('a -> unit) -> 'a list -> unit
-(** [List.iter f [a1; ...; an]] applies function [f] in turn to
-   [a1; ...; an]. It is equivalent to
-   [begin f a1; f a2; ...; f an; () end]. *)
-
-val iteri : (int -> 'a -> unit) -> 'a list -> unit
-(** Same as {!List.iter}, but the function is applied to the index of
-   the element as first argument (counting from 0), and the element
-   itself as second argument.
-   @since 4.00.0
-*)
-
-val map : ('a -> 'b) -> 'a list -> 'b list
-(** [List.map f [a1; ...; an]] applies function [f] to [a1, ..., an],
-   and builds the list [[f a1; ...; f an]]
-   with the results returned by [f].  Not tail-recursive. *)
-
-val mapi : (int -> 'a -> 'b) -> 'a list -> 'b list
-(** Same as {!List.map}, but the function is applied to the index of
-   the element as first argument (counting from 0), and the element
-   itself as second argument.  Not tail-recursive.
-   @since 4.00.0
-*)
-
-val rev_map : ('a -> 'b) -> 'a list -> 'b list
-(** [List.rev_map f l] gives the same result as
-   {!List.rev}[ (]{!List.map}[ f l)], but is tail-recursive and
-   more efficient. *)
-
-val fold_left : ('a -> 'b -> 'a) -> 'a -> 'b list -> 'a
-(** [List.fold_left f a [b1; ...; bn]] is
-   [f (... (f (f a b1) b2) ...) bn]. *)
-
-val fold_right : ('a -> 'b -> 'b) -> 'a list -> 'b -> 'b
-(** [List.fold_right f [a1; ...; an] b] is
-   [f a1 (f a2 (... (f an b) ...))].  Not tail-recursive. *)
-
-
-(** {1 Iterators on two lists} *)
-
-
-val iter2 : ('a -> 'b -> unit) -> 'a list -> 'b list -> unit
-(** [List.iter2 f [a1; ...; an] [b1; ...; bn]] calls in turn
-   [f a1 b1; ...; f an bn].
-   Raise [Invalid_argument] if the two lists are determined
-   to have different lengths. *)
-
-val map2 : ('a -> 'b -> 'c) -> 'a list -> 'b list -> 'c list
-(** [List.map2 f [a1; ...; an] [b1; ...; bn]] is
-   [[f a1 b1; ...; f an bn]].
-   Raise [Invalid_argument] if the two lists are determined
-   to have different lengths.  Not tail-recursive. *)
-
-val rev_map2 : ('a -> 'b -> 'c) -> 'a list -> 'b list -> 'c list
-(** [List.rev_map2 f l1 l2] gives the same result as
-   {!List.rev}[ (]{!List.map2}[ f l1 l2)], but is tail-recursive and
-   more efficient. *)
-
-val fold_left2 : ('a -> 'b -> 'c -> 'a) -> 'a -> 'b list -> 'c list -> 'a
-(** [List.fold_left2 f a [b1; ...; bn] [c1; ...; cn]] is
-   [f (... (f (f a b1 c1) b2 c2) ...) bn cn].
-   Raise [Invalid_argument] if the two lists are determined
-   to have different lengths. *)
-
-val fold_right2 : ('a -> 'b -> 'c -> 'c) -> 'a list -> 'b list -> 'c -> 'c
-(** [List.fold_right2 f [a1; ...; an] [b1; ...; bn] c] is
-   [f a1 b1 (f a2 b2 (... (f an bn c) ...))].
-   Raise [Invalid_argument] if the two lists are determined
-   to have different lengths.  Not tail-recursive. *)
-
-
-(** {1 List scanning} *)
-
-
-val for_all : ('a -> bool) -> 'a list -> bool
-(** [for_all p [a1; ...; an]] checks if all elements of the list
-   satisfy the predicate [p]. That is, it returns
-   [(p a1) && (p a2) && ... && (p an)]. *)
-
-val exists : ('a -> bool) -> 'a list -> bool
-(** [exists p [a1; ...; an]] checks if at least one element of
-   the list satisfies the predicate [p]. That is, it returns
-   [(p a1) || (p a2) || ... || (p an)]. *)
-
-val for_all2 : ('a -> 'b -> bool) -> 'a list -> 'b list -> bool
-(** Same as {!List.for_all}, but for a two-argument predicate.
-   Raise [Invalid_argument] if the two lists are determined
-   to have different lengths. *)
-
-val exists2 : ('a -> 'b -> bool) -> 'a list -> 'b list -> bool
-(** Same as {!List.exists}, but for a two-argument predicate.
-   Raise [Invalid_argument] if the two lists are determined
-   to have different lengths. *)
-
-val mem : 'a -> 'a list -> bool
-(** [mem a l] is true if and only if [a] is equal
-   to an element of [l]. *)
-
-val memq : 'a -> 'a list -> bool
-(** Same as {!List.mem}, but uses physical equality instead of structural
-   equality to compare list elements. *)
-
-
-(** {1 List searching} *)
-
-
-val find : ('a -> bool) -> 'a list -> 'a
-(** [find p l] returns the first element of the list [l]
-   that satisfies the predicate [p].
-   Raise [Not_found] if there is no value that satisfies [p] in the
-   list [l]. *)
-
-val find_opt: ('a -> bool) -> 'a list -> 'a option
-(** [find_opt p l] returns the first element of the list [l] that
-    satisfies the predicate [p], or [None] if there is no value that
-    satisfies [p] in the list [l].
-    @since 4.05 *)
-
-val filter : ('a -> bool) -> 'a list -> 'a list
-(** [filter p l] returns all the elements of the list [l]
-   that satisfy the predicate [p].  The order of the elements
-   in the input list is preserved.  *)
-
-val find_all : ('a -> bool) -> 'a list -> 'a list
-(** [find_all] is another name for {!List.filter}. *)
-
-val partition : ('a -> bool) -> 'a list -> 'a list * 'a list
-(** [partition p l] returns a pair of lists [(l1, l2)], where
-   [l1] is the list of all the elements of [l] that
-   satisfy the predicate [p], and [l2] is the list of all the
-   elements of [l] that do not satisfy [p].
-   The order of the elements in the input list is preserved. *)
-
-
-(** {1 Association lists} *)
-
-
-val assoc : 'a -> ('a * 'b) list -> 'b
-(** [assoc a l] returns the value associated with key [a] in the list of
-   pairs [l]. That is,
-   [assoc a [ ...; (a,b); ...] = b]
-   if [(a,b)] is the leftmost binding of [a] in list [l].
-   Raise [Not_found] if there is no value associated with [a] in the
-   list [l]. *)
-
-val assoc_opt: 'a -> ('a * 'b) list -> 'b option
-(** [assoc_opt a l] returns the value associated with key [a] in the list of
-   pairs [l]. That is,
-   [assoc_opt a [ ...; (a,b); ...] = b]
-   if [(a,b)] is the leftmost binding of [a] in list [l].
-   Returns [None] if there is no value associated with [a] in the
-   list [l].
-   @since 4.05 *)
-
-val assq : 'a -> ('a * 'b) list -> 'b
-(** Same as {!List.assoc}, but uses physical equality instead of structural
-   equality to compare keys. *)
-
-val assq_opt : 'a -> ('a * 'b) list -> 'b option
-(** Same as {!List.assoc_opt}, but uses physical equality instead of structural
-    equality to compare keys.
-    @since 4.05 *)
-
-val mem_assoc : 'a -> ('a * 'b) list -> bool
-(** Same as {!List.assoc}, but simply return true if a binding exists,
-   and false if no bindings exist for the given key. *)
-
-val mem_assq : 'a -> ('a * 'b) list -> bool
-(** Same as {!List.mem_assoc}, but uses physical equality instead of
-   structural equality to compare keys. *)
-
-val remove_assoc : 'a -> ('a * 'b) list -> ('a * 'b) list
-(** [remove_assoc a l] returns the list of
-   pairs [l] without the first pair with key [a], if any.
-   Not tail-recursive. *)
-
-val remove_assq : 'a -> ('a * 'b) list -> ('a * 'b) list
-(** Same as {!List.remove_assoc}, but uses physical equality instead
-   of structural equality to compare keys.  Not tail-recursive. *)
-
-
-(** {1 Lists of pairs} *)
-
-
-val split : ('a * 'b) list -> 'a list * 'b list
-(** Transform a list of pairs into a pair of lists:
-   [split [(a1,b1); ...; (an,bn)]] is [([a1; ...; an], [b1; ...; bn])].
-   Not tail-recursive.
-*)
-
-val combine : 'a list -> 'b list -> ('a * 'b) list
-(** Transform a pair of lists into a list of pairs:
-   [combine [a1; ...; an] [b1; ...; bn]] is
-   [[(a1,b1); ...; (an,bn)]].
-   Raise [Invalid_argument] if the two lists
-   have different lengths.  Not tail-recursive. *)
-
-
-(** {1 Sorting} *)
-
-
-val sort : ('a -> 'a -> int) -> 'a list -> 'a list
-(** Sort a list in increasing order according to a comparison
-   function.  The comparison function must return 0 if its arguments
-   compare as equal, a positive integer if the first is greater,
-   and a negative integer if the first is smaller (see Array.sort for
-   a complete specification).  For example,
-   {!Pervasives.compare} is a suitable comparison function.
-   The resulting list is sorted in increasing order.
-   [List.sort] is guaranteed to run in constant heap space
-   (in addition to the size of the result list) and logarithmic
-   stack space.
-
-   The current implementation uses Merge Sort. It runs in constant
-   heap space and logarithmic stack space.
-*)
-
-val stable_sort : ('a -> 'a -> int) -> 'a list -> 'a list
-(** Same as {!List.sort}, but the sorting algorithm is guaranteed to
-   be stable (i.e. elements that compare equal are kept in their
-   original order) .
-
-   The current implementation uses Merge Sort. It runs in constant
-   heap space and logarithmic stack space.
-*)
-
-val fast_sort : ('a -> 'a -> int) -> 'a list -> 'a list
-(** Same as {!List.sort} or {!List.stable_sort}, whichever is faster
-    on typical input. *)
-
-val sort_uniq : ('a -> 'a -> int) -> 'a list -> 'a list
-(** Same as {!List.sort}, but also remove duplicates.
-    @since 4.02.0 *)
-
-val merge : ('a -> 'a -> int) -> 'a list -> 'a list -> 'a list
-(** Merge two lists:
-    Assuming that [l1] and [l2] are sorted according to the
-    comparison function [cmp], [merge cmp l1 l2] will return a
-    sorted list containing all the elements of [l1] and [l2].
-    If several elements compare equal, the elements of [l1] will be
-    before the elements of [l2].
-    Not tail-recursive (sum of the lengths of the arguments).
-*)