@t2000/engine 1.16.0 → 1.17.1

package/dist/index.d.ts

@@ -1819,6 +1819,96 @@ declare function checkValidPair(producer: string, consumer: string): {
     ok: false;
     pair: string;
 };
+/**
+ * [SPEC 15 v0.7 follow-up — single-write regenerate, 2026-05-04]
+ * Shared helper that derives the Quote-Refresh fields
+ * (`canRegenerate`, `regenerateInput.toolUseIds`, `quoteAge`) from a
+ * collection of same-turn read tool_results. Used by both
+ * `composeBundleFromToolResults` (bundle path, N≥2) AND the engine's
+ * single-write `pending_action` yield path (N=1) — keeping the
+ * derivation in one place so the two paths can't drift on what
+ * counts as "regeneratable" or how `quoteAge` is computed.
+ *
+ * **Why the same logic on N=1.** Pre-v0.7 single-write actions never
+ * carried these fields (the original SPEC 7 P2.4b assumed bundles
+ * only), which left a UX gap: a single-write confirm-tier swap whose
+ * Cetus quote went stale had no Refresh-quote affordance. Bundles
+ * had it; single-writes didn't. v0.7 closes the gap by populating
+ * the same fields here, so the host's PermissionCard can render the
+ * same regenerate slot for either shape and `regenerateBundle()`
+ * can re-fire the same reads regardless of N.
+ *
+ * **Conservative inclusion.** Any same-turn read whose name is in
+ * `REGENERATABLE_READ_TOOLS` contributes — we don't inspect the
+ * write's input shape to confirm the read was actually consumed.
+ * False positives just enable the Refresh button when it could've
+ * stayed off; they don't change correctness (the re-fire is
+ * deterministic and the new bundle's input is recomputed from
+ * scratch).
+ *
+ * **`quoteAge` semantics.** Milliseconds since the stalest
+ * contributing read. `min` not `max` — we report the freshness of
+ * the WORST input because that's what gates UX. Clamped at ≥0
+ * against NTP clock skew (negative ages would render as
+ * "QUOTE -3s OLD" otherwise — see SPEC 7 P2.3 audit BUG 12).
+ *
+ * Returns `{ canRegenerate: false, regenerateToolUseIds: [],
+ * quoteAge: undefined }` when no contributing reads landed — the
+ * caller should NOT spread `regenerateInput` onto the action in
+ * that case (omit the field entirely).
+ */
+declare function computeRegenerateFields(readResults: Array<{
+    toolUseId: string;
+    toolName: string;
+    timestamp: number;
+}>): {
+    canRegenerate: boolean;
+    regenerateToolUseIds: string[];
+    quoteAge: number | undefined;
+};
+interface BundleCompositionInput {
+    /** All confirm-tier bundleable writes the LLM emitted in this turn. MUST be ≥2. */
+    pendingWrites: PendingToolCall[];
+    /** Tools registered with the engine — for description + modifiableFields lookup. */
+    tools: Tool[];
+    /**
+     * Same-turn earlier read tool_use ids + their results, in the order they
+     * landed. The helper extracts `regenerateInput.toolUseIds` from this set
+     * by intersecting it with the canonical regeneratable-read allow-list
+     * (`REGENERATABLE_READ_TOOLS`).
+     */
+    readResults: Array<{
+        toolUseId: string;
+        toolName: string;
+        timestamp: number;
+    }>;
+    /** Full assistant message blocks for the deferred turn (engine.ts uses this). */
+    assistantContent: ContentBlock[];
+    /** Already-resolved tool_result blocks (early-dispatched reads + auto writes). */
+    completedResults: Array<{
+        toolUseId: string;
+        content: string;
+        isError: boolean;
+    }>;
+    /** Per-write-call optional guard injections (already resolved, not re-run here). */
+    guardInjectionsByCallId?: Record<string, Array<{
+        _gate: string;
+        _hint?: string;
+        _warning?: string;
+    }>>;
+    /** Monotonic turn index — same value the legacy single-write path stamps. */
+    turnIndex: number;
+}
+/**
+ * Produce a bundled `PendingAction` from collected pending writes.
+ * Caller MUST have already verified pendingWrites.length >= 2 and that
+ * every entry's tool has `bundleable: true` + `permissionLevel: 'confirm'`.
+ *
+ * The helper additionally re-checks `bundleable: true` on each tool as a
+ * defensive guard against caller bugs (cheap, catches future call sites
+ * that misuse the helper).
+ */
+declare function composeBundleFromToolResults(input: BundleCompositionInput): PendingAction;
 
 /**
  * SPEC 7 v0.3 Quote-Refresh ReviewCard — engine-side bundle regeneration.
@@ -3747,7 +3837,7 @@ declare function fetchAudricHistory(address: string, opts: {
     limit?: number;
 }, env?: Record<string, string>, signal?: AbortSignal): Promise<AudricHistoryRecord[] | null>;
 
-declare const DEFAULT_SYSTEM_PROMPT = "You are Audric \u2014 a financial agent on Sui. Audric is exactly five products: Audric Passport (the trust layer \u2014 Google sign-in, non-custodial wallet, tap-to-confirm consent, sponsored gas \u2014 wraps every other product), Audric Intelligence (you \u2014 the 5-system brain: Agent Harness with 34 tools, Reasoning Engine with 14 guards and 6 skill recipes, Silent Profile, Chain Memory, AdviceLog), Audric Finance (manage money on Sui \u2014 Save via NAVI lending at 3-8% APY USDC, Credit via NAVI borrowing with health factor, Swap via Cetus aggregator across 20+ DEXs at 0.1% fee, Charts for yield/health/portfolio viz), Audric Pay (move money \u2014 send USDC, receive via payment links / invoices / QR; free, global, instant on Sui), and Audric Store (creator marketplace, ships Phase 5 \u2014 say \"coming soon\" if asked). Save, swap, borrow, repay, withdraw, charts \u2192 Audric Finance. Send, receive, payment-link, invoice, QR \u2192 Audric Pay. Your silent context (profile, memory, chain facts, advice log) shapes your replies but never surfaces as a notification \u2014 you act only when the user asks, and every write waits on their tap-to-confirm via Passport. You can also call 41 paid APIs (music, image, research, translation, weather, fulfilment) via MPP micropayments using the pay_api tool \u2014 this is an internal capability, not a promoted product, so only mention it when the user asks for something that needs it.\n\n## Response rules\n- 1-2 sentences max. No bullet lists unless asked. No preambles.\n- Never say \"Would you like me to...\", \"Sure!\", \"Great question!\", \"Absolutely!\" \u2014 just do it or say you can't.\n- Present amounts as $1,234.56 and rates as X.XX% APY.\n- Show top 3 results unless asked for more. Summarize totals in one line.\n\n## Caption rules (after tool calls)\n- **When a canvas was rendered (`render_canvas` was called, or any tool that auto-renders a card like balance_check / portfolio_analysis / savings_info / health_check / transaction_history): the canvas IS the answer.** Your chat message must NOT restate wallet, savings, debt, holdings, or net-worth numbers \u2014 they are already on screen. Add at most ONE sentence of context, advice, or next step (e.g. \"Your USDC is idle \u2014 consider depositing for ~4.5% APY\"), or say nothing.\n- **When NO canvas was rendered:** lead with the result and quote the actual numbers from the tool. One sentence.\n- **NEVER describe a position as \"no\", \"none\", \"minimal\", \"zero\", or \"inactive\" if the tool result contains a positive value for that field.** The tool result is the source of truth \u2014 never your interior summary. If the canvas shows $100 in savings, you cannot say \"no active savings\" in the caption.\n- **NEVER claim \"no DeFi positions\" when the tool result says the DeFi slice is UNAVAILABLE.** When `balance_check` displayText contains \"DeFi positions: UNAVAILABLE\" or \"DeFi data source unreachable\", the slice is unknown \u2014 say \"DeFi data is currently unavailable\" or omit the mention. Only claim \"no DeFi positions\" when the displayText explicitly omits any DeFi line (i.e. the fetch succeeded with $0 across every covered protocol).\n\n## Execution rule\nOnly offer to execute actions you have tools for. If you retrieved a quote, data, or information but have no tool to act on it, give the user the result and tell them where to execute manually \u2014 in one sentence. Never say \"Would you like me to proceed?\" unless you have a tool that can actually proceed.\n\n## Before acting\n- ALWAYS call a read tool first before any write tool \u2014 balance_check before save/send/borrow, savings_info before withdraw.\n- Show real numbers from tools \u2014 never fabricate rates, amounts, or balances.\n- When user says \"all\" or an imprecise amount, call the read tool first to get the exact number.\n\n## Tool usage\n- Use tools proactively \u2014 don't refuse requests you can handle.\n- For real-world questions (weather, search, news, prices), use pay_api. Tell the user the cost first.\n- For NAVI lending APYs, use rates_info; for VOLO liquid staking stats, use volo_stats; for spot token prices, use token_prices.\n- For protocol-level due diligence (TVL, fees, audits, safety) on Sui DeFi protocols, use protocol_deep_dive with the slug.\n- Run multiple read-only tools in parallel when you need several data points.\n- If a tool errors, say what went wrong and what to try instead. One sentence.\n\n## Savings = USDC or USDsui (critical)\n- save_deposit and borrow accept ONLY USDC or USDsui. No other token can be deposited or borrowed.\n- USDC is the canonical default. USDsui is permitted because it has a productive NAVI pool (often a higher APY than USDC). All other holdings (GOLD, SUI, USDT, USDe, ETH, NAVX, WAL) are NOT saveable.\n- When asked \"how much can I save?\":\n  - Report saveableUsdc from balance_check (the user's USDC wallet balance \u2014 canonical saveable).\n  - If the user also holds USDsui in their wallet, report that separately as \"USDsui (saveable): X.XX\". Do NOT roll the two together \u2014 the LLM must keep the per-asset distinction so the user can pick.\n- When the user says \"save 10 USDC\" \u2192 call save_deposit with asset=\"USDC\". When they say \"save 10 USDsui\" \u2192 call with asset=\"USDsui\". Never silently substitute.\n- When the user says \"save 10\" (no asset) \u2192 call balance_check first and ask which stable they want, OR pick whichever they hold more of with a one-line explanation.\n- \"Best stable to save right now?\" \u2192 call rates_info to compare USDC vs USDsui APY on NAVI; let the user pick.\n- NEVER say a non-saveable token (GOLD, SUI, USDT, etc.) is \"in savings\" or \"earning APY in savings\". Wallet holdings \u2260 savings positions, even for stables we don't accept.\n- If user wants to save a non-saveable token, tell them to swap to USDC or USDsui first. Do NOT auto-chain swap + deposit.\n- Repay symmetry: a USDsui debt MUST be repaid with USDsui (and USDC debt with USDC). When calling repay_debt, pass asset=\"USDsui\" if the borrow is USDsui. If the user asks \"repay my debt\" and savings_info shows borrows in BOTH stables, list both and ask which to repay first. If the user holds the wrong stable, tell them to swap manually \u2014 do NOT auto-chain swap + repay.\n\n## Multi-step flows\n- \"How much X for Y?\": swap_quote first, then swap_execute if user confirms.\n- \"Swap then save\": swap_execute \u2192 balance_check \u2192 save_deposit. Confirm each step.\n- \"Buy $X of token\": token_prices \u2192 calculate amount \u2192 swap_execute.\n- \"Best yield on SUI\": compare rates_info (NAVI lending) + volo_stats (vSUI liquid staking).\n- withdraw supports legacy positions: USDC, USDe, USDsui, SUI. Pass asset param to withdraw a specific token.\n- \"Deposit SUI to earn yield\": volo_stake for SUI liquid staking. save_deposit only accepts USDC or USDsui.\n- \"Is protocol X safe?\" / \"Tell me about NAVI\": protocol_deep_dive with the slug.\n- \"Full account report\" / \"account summary\" / \"give me everything\" / \"complete overview\": triggers the `account_report` recipe \u2014 when the recipe block appears, follow EVERY step including all six tool calls. Each step renders a distinct rich card; skipping a step means a missing card.\n\n## Safety\n- Never encourage risky financial behavior.\n- Warn when health factor < 1.5.\n- All amounts in USDC unless stated otherwise.";
+declare const DEFAULT_SYSTEM_PROMPT = "You are Audric \u2014 a financial agent on Sui. Audric is exactly five products: Audric Passport (the trust layer \u2014 Google sign-in, non-custodial wallet, tap-to-confirm consent, sponsored gas \u2014 wraps every other product), Audric Intelligence (you \u2014 the 5-system brain: Agent Harness with 34 tools, Reasoning Engine with 14 guards and 6 skill recipes, Silent Profile, Chain Memory, AdviceLog), Audric Finance (manage money on Sui \u2014 Save via NAVI lending at 3-8% APY USDC, Credit via NAVI borrowing with health factor, Swap via Cetus aggregator across 20+ DEXs at 0.1% fee, Charts for yield/health/portfolio viz), Audric Pay (move money \u2014 send USDC, receive via payment links / invoices / QR; free, global, instant on Sui), and Audric Store (creator marketplace, ships Phase 5 \u2014 say \"coming soon\" if asked). Save, swap, borrow, repay, withdraw, charts \u2192 Audric Finance. Send, receive, payment-link, invoice, QR \u2192 Audric Pay. Your silent context (profile, memory, chain facts, advice log) shapes your replies but never surfaces as a notification \u2014 you act only when the user asks, and every write waits on their tap-to-confirm via Passport. You can also call 41 paid APIs (music, image, research, translation, weather, fulfilment) via MPP micropayments using the pay_api tool \u2014 this is an internal capability, not a promoted product, so only mention it when the user asks for something that needs it.\n\n## Response rules\n- 1-2 sentences max. No bullet lists unless asked. No preambles.\n- Never say \"Would you like me to...\", \"Sure!\", \"Great question!\", \"Absolutely!\" \u2014 just do it or say you can't.\n- Present amounts as $1,234.56 and rates as X.XX% APY.\n- Show top 3 results unless asked for more. Summarize totals in one line.\n\n## Caption rules (after tool calls)\n- **When a canvas was rendered (`render_canvas` was called, or any tool that auto-renders a card like balance_check / portfolio_analysis / savings_info / health_check / transaction_history): the canvas IS the answer.** Your chat message must NOT restate wallet, savings, debt, holdings, or net-worth numbers \u2014 they are already on screen. Add at most ONE sentence of context, advice, or next step (e.g. \"Your USDC is idle \u2014 consider depositing for ~4.5% APY\"), or say nothing.\n- **When NO canvas was rendered:** lead with the result and quote the actual numbers from the tool. One sentence.\n- **NEVER describe a position as \"no\", \"none\", \"minimal\", \"zero\", or \"inactive\" if the tool result contains a positive value for that field.** The tool result is the source of truth \u2014 never your interior summary. If the canvas shows $100 in savings, you cannot say \"no active savings\" in the caption.\n- **NEVER claim \"no DeFi positions\" when the tool result says the DeFi slice is UNAVAILABLE.** When `balance_check` displayText contains \"DeFi positions: UNAVAILABLE\" or \"DeFi data source unreachable\", the slice is unknown \u2014 say \"DeFi data is currently unavailable\" or omit the mention. Only claim \"no DeFi positions\" when the displayText explicitly omits any DeFi line (i.e. the fetch succeeded with $0 across every covered protocol).\n\n## Execution rule\nOnly offer to execute actions you have tools for. If you retrieved a quote, data, or information but have no tool to act on it, give the user the result and tell them where to execute manually \u2014 in one sentence. Never say \"Would you like me to proceed?\" unless you have a tool that can actually proceed.\n\n## Before acting\n- ALWAYS call a read tool first before any write tool \u2014 balance_check before save/send/borrow, savings_info before withdraw.\n- Show real numbers from tools \u2014 never fabricate rates, amounts, or balances.\n- When user says \"all\" or an imprecise amount, call the read tool first to get the exact number.\n\n## Tool usage\n- Use tools proactively \u2014 don't refuse requests you can handle.\n- For real-world questions (weather, search, news, prices), use pay_api. Tell the user the cost first.\n- For NAVI lending APYs, use rates_info; for VOLO liquid staking stats, use volo_stats; for spot token prices, use token_prices.\n- For protocol-level due diligence (TVL, fees, audits, safety) on Sui DeFi protocols, use protocol_deep_dive with the slug.\n- Run multiple read-only tools in parallel when you need several data points.\n- If a tool errors, say what went wrong and what to try instead. One sentence.\n\n## Savings = USDC or USDsui (critical)\n- save_deposit and borrow accept ONLY USDC or USDsui. No other token can be deposited or borrowed.\n- USDC is the canonical default. USDsui is permitted because it has a productive NAVI pool (often a higher APY than USDC). All other holdings (GOLD, SUI, USDT, USDe, ETH, NAVX, WAL) are NOT saveable.\n- When asked \"how much can I save?\":\n  - Report saveableUsdc from balance_check (the user's USDC wallet balance \u2014 canonical saveable).\n  - If the user also holds USDsui in their wallet, report that separately as \"USDsui (saveable): X.XX\". Do NOT roll the two together \u2014 the LLM must keep the per-asset distinction so the user can pick.\n- When the user says \"save 10 USDC\" \u2192 call save_deposit with asset=\"USDC\". When they say \"save 10 USDsui\" \u2192 call with asset=\"USDsui\". Never silently substitute.\n- When the user says \"save 10\" (no asset) \u2192 call balance_check first and ask which stable they want, OR pick whichever they hold more of with a one-line explanation.\n- \"Best stable to save right now?\" \u2192 call rates_info to compare USDC vs USDsui APY on NAVI; let the user pick.\n- NEVER say a non-saveable token (GOLD, SUI, USDT, etc.) is \"in savings\" or \"earning APY in savings\". Wallet holdings \u2260 savings positions, even for stables we don't accept.\n- If user wants to save a non-saveable token, tell them to swap to USDC or USDsui first. Do NOT auto-chain swap + deposit.\n- Repay symmetry: a USDsui debt MUST be repaid with USDsui (and USDC debt with USDC). When calling repay_debt, pass asset=\"USDsui\" if the borrow is USDsui. If the user asks \"repay my debt\" and savings_info shows borrows in BOTH stables, list both and ask which to repay first. If the user holds the wrong stable, tell them to swap manually \u2014 do NOT auto-chain swap + repay.\n\n## Fees (critical \u2014 never deny having fees)\n- **Swap:** 0.1% Audric overlay fee on the output amount, taken by the aggregator and sent to the Audric treasury. The Cetus DEX fee (typically 0.01\u20130.25%) is separate and goes to the DEX. Both are shown on the swap card. Never say Audric takes no cut on swaps \u2014 it does.\n- **Save (deposit):** 0.1% Audric fee on the deposit amount, taken atomically in the same transaction.\n- **Borrow:** 0.05% Audric fee on the borrow amount, taken atomically in the same transaction.\n- **Withdraw / Repay / Send / Receive:** No Audric fee. Gas is sponsored (free to the user).\n- When a user asks about fees, quote the above. Do NOT say \"I don't take a cut\", \"fees are zero\", \"all your value stays with you\", or \"I'm here to execute, not extract\" \u2014 those are incorrect for swap, save, and borrow.\n\n## Multi-step flows\n- \"How much X for Y?\": swap_quote first, then swap_execute if user confirms.\n- \"Swap then save\": swap_execute \u2192 balance_check \u2192 save_deposit. Confirm each step.\n- \"Buy $X of token\": token_prices \u2192 calculate amount \u2192 swap_execute.\n- \"Best yield on SUI\": compare rates_info (NAVI lending) + volo_stats (vSUI liquid staking).\n- withdraw supports legacy positions: USDC, USDe, USDsui, SUI. Pass asset param to withdraw a specific token.\n- \"Deposit SUI to earn yield\": volo_stake for SUI liquid staking. save_deposit only accepts USDC or USDsui.\n- \"Is protocol X safe?\" / \"Tell me about NAVI\": protocol_deep_dive with the slug.\n- \"Full account report\" / \"account summary\" / \"give me everything\" / \"complete overview\": triggers the `account_report` recipe \u2014 when the recipe block appears, follow EVERY step including all six tool calls. Each step renders a distinct rich card; skipping a step means a missing card.\n\n## Safety\n- Never encourage risky financial behavior.\n- Warn when health factor < 1.5.\n- All amounts in USDC unless stated otherwise.";
 
 /** Cache entry shape. `cachedAt` is the wall-clock ms at write time. */
 interface NaviCacheEntry {
@@ -3830,4 +3920,4 @@ declare function getTelemetrySink(): TelemetrySink;
 /** Restore the default noop sink. Used by test teardowns. */
 declare function resetTelemetrySink(): void;
 
-export { type AddressPortfolio, AnthropicProvider, type AnthropicProviderConfig, type AudricHistoryRecord, type AudricPortfolioResult, type AwaitOrFetchOpts, type BalancePrices, type BalanceResult, BalanceTracker, type BuildToolOptions, CANVAS_TEMPLATES, type CanvasTemplate, type ChatParams, type CompactOptions, type ContentBlock, ContextBudget, type ContextBudgetConfig, type ConversationState, type ConversationStateStore, type CostSnapshot, CostTracker, type CostTrackerConfig, DEFAULT_GUARD_CONFIG, DEFAULT_LEASE_SEC, DEFAULT_PERMISSION_CONFIG, DEFAULT_POLL_BUDGET_MS, DEFAULT_POLL_INTERVAL_MS, DEFAULT_SYSTEM_PROMPT, DEFAULT_TOOL_TTL_MS, type DefiCacheEntry, type DefiCacheStore, type DefiProtocol, type DefiSummary, EFFORT_THINKING_BUDGET_CAPS, EarlyToolDispatcher, type EngineConfig, type EngineEvent, type EvalSummaryParseResult, type EvaluationItem, type EvaluationStatus, type FetchLock, type GuardCheckResult, type GuardConfig, type GuardEvent, type GuardInjection, type GuardResult, type GuardRunnerState, type GuardTier, type GuardVerdict, type HarnessShape, type HealthFactorResult, InMemoryDefiCacheStore, InMemoryFetchLock, InMemoryNaviCacheStore, InMemoryWalletCacheStore, InvalidAddressError, type LLMProvider, MAX_BUNDLE_OPS, type McpCallResult, McpClientManager, McpResponseCache, type McpServerConfig, type McpServerConnection, type McpToolAdapterConfig, type McpToolDescriptor, MemorySessionStore, type Message, NAVI_ADDR_TTL_SEC, NAVI_MCP_CONFIG, NAVI_MCP_URL, NAVI_RATES_TTL_SEC, NAVI_SERVER_NAME, type NaviCacheEntry, type NaviCacheStore, type NaviRawCoin, type NaviRawHealthFactor, type NaviRawPool, type NaviRawPosition, type NaviRawPositionsResponse, type NaviRawProtocolStats, type NaviRawRewardsResponse, type NaviReadOptions, NaviTools, type NormalizedAddress, type OutputConfig, PERMISSION_PRESETS, type PendingAction, type PendingActionModifiableField, type PendingActionStep, type PendingReward, type PendingToolCall, type PermissionLevel, type PermissionOperation, type PermissionResponse, type PermissionRule, type PortfolioCoin, type PositionEntry, type PreflightResult, type ProtocolStats, type ProviderEvent, QueryEngine, READ_TOOLS, REGENERATABLE_READ_TOOLS, type RatesResult, type Recipe, type RecipePrerequisite, RecipeRegistry, type RecipeStep, type RecipeStepOnError, type RegenerateFailure, type RegenerateResult, type RegenerateSuccess, type RegenerateTimelineEvent, RetryTracker, type SSEEvent, SUINS_NAME_REGEX, SUI_ADDRESS_REGEX, SUI_ADDRESS_STRICT_REGEX, type SavingsResult, type ServerPositionData, type SessionData, type SessionStore, type StateType, type StopReason, type SuiCoinBalance, SuinsNotRegisteredError, SuinsRpcError, type SystemBlock, type SystemPrompt, TOOL_FLAGS, TOOL_MODIFIABLE_FIELDS, TOOL_TTL_MS, type TelemetrySink, type TelemetryTags, type ThinkingConfig, type ThinkingEffort, type TodoItem$1 as TodoItem, type Tool, type ToolChoice, type ToolContext, type ToolDefinition, type ToolFlags, type ToolJsonSchema, type ToolResult, TxMutex, type UpdateTodoInput, type TodoItem as UpdateTodoItem, type UserFinancialProfile, type UserPermissionConfig, VALID_PAIRS, WRITE_TOOLS, type WalletCacheEntry, type WalletCacheStore, type WalletCoin, _resetNaviCircuitBreaker, activitySummaryTool, adaptAllMcpTools, adaptAllServerTools, adaptMcpTool, applyToolFlags, awaitOrFetch, balanceCheckTool, borrowTool, budgetToolResult, buildCachedSystemPrompt, buildMcpTools, buildProactivenessInstructions, buildProfileContext, buildSelfEvaluationInstruction, buildStateContext, buildTool, bundleShortestTtl, checkValidPair, claimRewardsTool, clampThinkingForEffort, classifyEffort, clearPortfolioCache, clearPortfolioCacheFor, clearPriceMapCache, compactMessages, createGuardRunnerState, engineToSSE, estimateTokens, explainTxTool, extractConversationText, extractMcpText, fetchAddressDefiPortfolio, fetchAddressPortfolio, fetchAudricHistory, fetchAudricPortfolio, fetchAvailableRewards, fetchBalance, fetchHealthFactor, fetchPositions, fetchProtocolStats, fetchRates, fetchSavings, fetchTokenPrices, fetchWalletCoins, findTool, getAudricApiBase, getDefaultTools, getDefiCacheStore, getFetchLock, getMcpManager, getModifiableFields, getNaviCacheStore, getTelemetrySink, getToolFlags, getWalletAddress, getWalletCacheStore, guardArtifactPreview, guardStaleData, harnessShapeForEffort, hasNaviMcp, healthCheckTool, isBundleableTool, loadRecipes, looksLikeSuiNs, microcompact, mppServicesTool, naviKey, normalizeAddressInput, parseEvalSummary, parseMcpJson, parseRecipe, parseSSE, payApiTool, portfolioAnalysisTool, protocolDeepDiveTool, ratesInfoTool, regenerateBundle, registerEngineTools, renderCanvasTool, repayDebtTool, requireAgent, resetDefiCacheStore, resetFetchLock, resetNaviCacheStore, resetTelemetrySink, resetWalletCacheStore, resolveAddressToSuinsViaRpc, resolvePermissionTier, resolveSuinsTool, resolveSuinsViaRpc, resolveUsdValue, runGuards, runTools, saveContactTool, saveDepositTool, savingsInfoTool, sendTransferTool, serializeSSE, setDefiCacheStore, setFetchLock, setNaviCacheStore, setTelemetrySink, setWalletCacheStore, spendingAnalyticsTool, swapExecuteTool, swapQuoteTool, tokenPricesTool, toolNameToOperation, toolsToDefinitions, transactionHistoryTool, transformBalance, transformHealthFactor, transformPositions, transformRates, transformRewards, transformSavings, updateGuardStateAfterToolResult, updateTodoTool, validateHistory, voloStakeTool, voloStatsTool, voloUnstakeTool, webSearchTool, withdrawTool, yieldSummaryTool };
+export { type AddressPortfolio, AnthropicProvider, type AnthropicProviderConfig, type AudricHistoryRecord, type AudricPortfolioResult, type AwaitOrFetchOpts, type BalancePrices, type BalanceResult, BalanceTracker, type BuildToolOptions, type BundleCompositionInput, CANVAS_TEMPLATES, type CanvasTemplate, type ChatParams, type CompactOptions, type ContentBlock, ContextBudget, type ContextBudgetConfig, type ConversationState, type ConversationStateStore, type CostSnapshot, CostTracker, type CostTrackerConfig, DEFAULT_GUARD_CONFIG, DEFAULT_LEASE_SEC, DEFAULT_PERMISSION_CONFIG, DEFAULT_POLL_BUDGET_MS, DEFAULT_POLL_INTERVAL_MS, DEFAULT_SYSTEM_PROMPT, DEFAULT_TOOL_TTL_MS, type DefiCacheEntry, type DefiCacheStore, type DefiProtocol, type DefiSummary, EFFORT_THINKING_BUDGET_CAPS, EarlyToolDispatcher, type EngineConfig, type EngineEvent, type EvalSummaryParseResult, type EvaluationItem, type EvaluationStatus, type FetchLock, type GuardCheckResult, type GuardConfig, type GuardEvent, type GuardInjection, type GuardResult, type GuardRunnerState, type GuardTier, type GuardVerdict, type HarnessShape, type HealthFactorResult, InMemoryDefiCacheStore, InMemoryFetchLock, InMemoryNaviCacheStore, InMemoryWalletCacheStore, InvalidAddressError, type LLMProvider, MAX_BUNDLE_OPS, type McpCallResult, McpClientManager, McpResponseCache, type McpServerConfig, type McpServerConnection, type McpToolAdapterConfig, type McpToolDescriptor, MemorySessionStore, type Message, NAVI_ADDR_TTL_SEC, NAVI_MCP_CONFIG, NAVI_MCP_URL, NAVI_RATES_TTL_SEC, NAVI_SERVER_NAME, type NaviCacheEntry, type NaviCacheStore, type NaviRawCoin, type NaviRawHealthFactor, type NaviRawPool, type NaviRawPosition, type NaviRawPositionsResponse, type NaviRawProtocolStats, type NaviRawRewardsResponse, type NaviReadOptions, NaviTools, type NormalizedAddress, type OutputConfig, PERMISSION_PRESETS, type PendingAction, type PendingActionModifiableField, type PendingActionStep, type PendingReward, type PendingToolCall, type PermissionLevel, type PermissionOperation, type PermissionResponse, type PermissionRule, type PortfolioCoin, type PositionEntry, type PreflightResult, type ProtocolStats, type ProviderEvent, QueryEngine, READ_TOOLS, REGENERATABLE_READ_TOOLS, type RatesResult, type Recipe, type RecipePrerequisite, RecipeRegistry, type RecipeStep, type RecipeStepOnError, type RegenerateFailure, type RegenerateResult, type RegenerateSuccess, type RegenerateTimelineEvent, RetryTracker, type SSEEvent, SUINS_NAME_REGEX, SUI_ADDRESS_REGEX, SUI_ADDRESS_STRICT_REGEX, type SavingsResult, type ServerPositionData, type SessionData, type SessionStore, type StateType, type StopReason, type SuiCoinBalance, SuinsNotRegisteredError, SuinsRpcError, type SystemBlock, type SystemPrompt, TOOL_FLAGS, TOOL_MODIFIABLE_FIELDS, TOOL_TTL_MS, type TelemetrySink, type TelemetryTags, type ThinkingConfig, type ThinkingEffort, type TodoItem$1 as TodoItem, type Tool, type ToolChoice, type ToolContext, type ToolDefinition, type ToolFlags, type ToolJsonSchema, type ToolResult, TxMutex, type UpdateTodoInput, type TodoItem as UpdateTodoItem, type UserFinancialProfile, type UserPermissionConfig, VALID_PAIRS, WRITE_TOOLS, type WalletCacheEntry, type WalletCacheStore, type WalletCoin, _resetNaviCircuitBreaker, activitySummaryTool, adaptAllMcpTools, adaptAllServerTools, adaptMcpTool, applyToolFlags, awaitOrFetch, balanceCheckTool, borrowTool, budgetToolResult, buildCachedSystemPrompt, buildMcpTools, buildProactivenessInstructions, buildProfileContext, buildSelfEvaluationInstruction, buildStateContext, buildTool, bundleShortestTtl, checkValidPair, claimRewardsTool, clampThinkingForEffort, classifyEffort, clearPortfolioCache, clearPortfolioCacheFor, clearPriceMapCache, compactMessages, composeBundleFromToolResults, computeRegenerateFields, createGuardRunnerState, engineToSSE, estimateTokens, explainTxTool, extractConversationText, extractMcpText, fetchAddressDefiPortfolio, fetchAddressPortfolio, fetchAudricHistory, fetchAudricPortfolio, fetchAvailableRewards, fetchBalance, fetchHealthFactor, fetchPositions, fetchProtocolStats, fetchRates, fetchSavings, fetchTokenPrices, fetchWalletCoins, findTool, getAudricApiBase, getDefaultTools, getDefiCacheStore, getFetchLock, getMcpManager, getModifiableFields, getNaviCacheStore, getTelemetrySink, getToolFlags, getWalletAddress, getWalletCacheStore, guardArtifactPreview, guardStaleData, harnessShapeForEffort, hasNaviMcp, healthCheckTool, isBundleableTool, loadRecipes, looksLikeSuiNs, microcompact, mppServicesTool, naviKey, normalizeAddressInput, parseEvalSummary, parseMcpJson, parseRecipe, parseSSE, payApiTool, portfolioAnalysisTool, protocolDeepDiveTool, ratesInfoTool, regenerateBundle, registerEngineTools, renderCanvasTool, repayDebtTool, requireAgent, resetDefiCacheStore, resetFetchLock, resetNaviCacheStore, resetTelemetrySink, resetWalletCacheStore, resolveAddressToSuinsViaRpc, resolvePermissionTier, resolveSuinsTool, resolveSuinsViaRpc, resolveUsdValue, runGuards, runTools, saveContactTool, saveDepositTool, savingsInfoTool, sendTransferTool, serializeSSE, setDefiCacheStore, setFetchLock, setNaviCacheStore, setTelemetrySink, setWalletCacheStore, spendingAnalyticsTool, swapExecuteTool, swapQuoteTool, tokenPricesTool, toolNameToOperation, toolsToDefinitions, transactionHistoryTool, transformBalance, transformHealthFactor, transformPositions, transformRates, transformRewards, transformSavings, updateGuardStateAfterToolResult, updateTodoTool, validateHistory, voloStakeTool, voloStatsTool, voloUnstakeTool, webSearchTool, withdrawTool, yieldSummaryTool };

package/dist/index.js

@@ -3073,7 +3073,7 @@ var transactionHistoryTool = buildTool({
 var SAVE_ASSETS = ["USDC", "USDsui"];
 var saveDepositTool = buildTool({
   name: "save_deposit",
-  description: 'Deposit USDC or USDsui into NAVI savings to earn yield. ONLY these two stables are accepted. If the user asks to save/deposit any other token (GOLD, SUI, USDT, USDe, ETH, etc.), do NOT call this tool and do NOT automatically swap their tokens and deposit. Instead, tell the user that only USDC and USDsui deposits are supported and ask if they would like to swap first. Let the user decide \u2014 never auto-chain swap + deposit. When the user says "save 10 USDC" pass asset="USDC". When they say "save 10 USDsui" pass asset="USDsui". When they say "save 10" with no asset, ALWAYS call balance_check first and ask which stable they want to deposit (or default to whichever they hold more of, with a one-line note). Never silently substitute USDsui for USDC or vice versa. Payment Stream: bundleable \u2014 when paired with another bundleable write in the same request (e.g. "swap to USDC and save"), emit all calls in the same assistant turn so the engine collapses them into one atomic PTB the user signs once.',
+  description: 'Deposit USDC or USDsui into NAVI savings to earn yield. ONLY these two stables are accepted. If the user asks to save/deposit any other token (GOLD, SUI, USDT, USDe, ETH, etc.), do NOT call this tool and do NOT automatically swap their tokens and deposit. Instead, tell the user that only USDC and USDsui deposits are supported and ask if they would like to swap first. Let the user decide \u2014 never auto-chain swap + deposit. When the user says "save 10 USDC" pass asset="USDC". When they say "save 10 USDsui" pass asset="USDsui". When they say "save 10" with no asset, ALWAYS call balance_check first and ask which stable they want to deposit (or default to whichever they hold more of, with a one-line note). Never silently substitute USDsui for USDC or vice versa. Payment Intent: composable \u2014 when paired with another composable write in the same request (e.g. "swap to USDC and save"), emit all calls in the same assistant turn so the engine compiles them into one atomic Payment Intent the user signs once.',
   inputSchema: z.object({
     amount: z.number().positive(),
     asset: z.enum(SAVE_ASSETS).optional().describe('"USDC" or "USDsui". Defaults to USDC when omitted.')
@@ -3126,7 +3126,7 @@ var saveDepositTool = buildTool({
 });
 var withdrawTool = buildTool({
   name: "withdraw",
-  description: `Withdraw USDC or USDsui from NAVI lending back to wallet. Defaults to USDC. Audric supports ONLY USDC and USDsui \u2014 these are the same two stables save_deposit accepts. NAVI may also surface legacy positions (USDe, SUI, etc.) in savings_info / balance_check; those are READ-ONLY through Audric. For non-canonical positions, direct the user to NAVI's app (https://app.naviprotocol.io) \u2014 Audric will not withdraw them. Payment Stream: bundleable \u2014 when paired with another bundleable write in the same request (e.g. "withdraw and send to Mom"), emit all calls in the same assistant turn so the engine collapses them into one atomic PTB the user signs once.`,
+  description: `Withdraw USDC or USDsui from NAVI lending back to wallet. Defaults to USDC. Audric supports ONLY USDC and USDsui \u2014 these are the same two stables save_deposit accepts. NAVI may also surface legacy positions (USDe, SUI, etc.) in savings_info / balance_check; those are READ-ONLY through Audric. For non-canonical positions, direct the user to NAVI's app (https://app.naviprotocol.io) \u2014 Audric will not withdraw them. Payment Intent: composable \u2014 when paired with another composable write in the same request (e.g. "withdraw and send to Mom"), emit all calls in the same assistant turn so the engine compiles them into one atomic Payment Intent the user signs once.`,
   inputSchema: z.object({
     amount: z.number().positive(),
     asset: z.string().optional().describe("Asset to withdraw \u2014 must be USDC (default) or USDsui. Other assets surfaced in savings_info are read-only via Audric.")
@@ -3169,7 +3169,7 @@ var withdrawTool = buildTool({
 var ASSET_LIST = ALL_NAVI_ASSETS.map((a) => String(a)).join(", ");
 var sendTransferTool = buildTool({
   name: "send_transfer",
-  description: `Send ANY supported token (${ASSET_LIST}) to another Sui address or contact name. Validates the address, checks balance, and executes the on-chain transfer. MUST set the \`asset\` field to the token symbol you want to send (case-insensitive). If \`asset\` is omitted, USDC is assumed \u2014 only do this when the user explicitly asks for USDC. When the user asks to send a token by name (SUI, USDT, etc.) or to send the proceeds of a just-completed swap, you MUST pass \`asset\` matching that token. Returns tx hash, gas cost, and updated balance. Payment Stream: bundleable \u2014 when paired with another bundleable write in the same request (e.g. "swap to USDC and send to Mom", "withdraw and send"), emit all calls in the same assistant turn so the engine collapses them into one atomic PTB the user signs once.`,
+  description: `Send ANY supported token (${ASSET_LIST}) to another Sui address or contact name. Validates the address, checks balance, and executes the on-chain transfer. MUST set the \`asset\` field to the token symbol you want to send (case-insensitive). If \`asset\` is omitted, USDC is assumed \u2014 only do this when the user explicitly asks for USDC. When the user asks to send a token by name (SUI, USDT, etc.) or to send the proceeds of a just-completed swap, you MUST pass \`asset\` matching that token. Returns tx hash, gas cost, and updated balance. Payment Intent: composable \u2014 when paired with another composable write in the same request (e.g. "swap to USDC and send to Mom", "withdraw and send"), emit all calls in the same assistant turn so the engine compiles them into one atomic Payment Intent the user signs once.`,
   inputSchema: z.object({
     to: z.string().min(1),
     amount: z.number().positive(),
@@ -3246,7 +3246,7 @@ var sendTransferTool = buildTool({
 var BORROW_ASSETS = ["USDC", "USDsui"];
 var borrowTool = buildTool({
   name: "borrow",
-  description: 'Borrow USDC or USDsui against savings collateral. ONLY these two stables are supported. Requires existing savings deposits as collateral. Checks max safe borrow and health factor. Returns tx hash, fee, asset borrowed, and post-borrow health factor. When the user says "borrow 10 USDC" pass asset="USDC". When they say "borrow 10 USDsui" pass asset="USDsui". When they say "borrow 10" with no asset, default to USDC unless the user has only USDsui collateral. Payment Stream: bundleable \u2014 when paired with another bundleable write in the same request (e.g. "borrow $50 and send to Mom"), emit all calls in the same assistant turn so the engine collapses them into one atomic PTB the user signs once.',
+  description: 'Borrow USDC or USDsui against savings collateral. ONLY these two stables are supported. Requires existing savings deposits as collateral. Checks max safe borrow and health factor. Returns tx hash, fee, asset borrowed, and post-borrow health factor. When the user says "borrow 10 USDC" pass asset="USDC". When they say "borrow 10 USDsui" pass asset="USDsui". When they say "borrow 10" with no asset, default to USDC unless the user has only USDsui collateral. Payment Intent: composable \u2014 when paired with another composable write in the same request (e.g. "borrow $50 and send to Mom"), emit all calls in the same assistant turn so the engine compiles them into one atomic Payment Intent the user signs once.',
   inputSchema: z.object({
     amount: z.number().positive(),
     asset: z.enum(BORROW_ASSETS).optional().describe('"USDC" or "USDsui". Defaults to USDC when omitted.')
@@ -3300,7 +3300,7 @@ var borrowTool = buildTool({
 var REPAY_ASSETS = ["USDC", "USDsui"];
 var repayDebtTool = buildTool({
   name: "repay_debt",
-  description: 'Repay outstanding USDC or USDsui debt. Always call balance_check first to know the debt amount + which asset is owed (savings_info shows per-asset borrow positions). Pass asset="USDC" or asset="USDsui" to target a specific debt. When omitted, repays the highest-APY borrow first. Important: a USDsui debt MUST be repaid with USDsui (and USDC debt with USDC) \u2014 the SDK fetches the correct coin type for the targeted asset, but the user must hold enough of that stable in their wallet. If the user has only the wrong stable, do NOT auto-swap \u2014 tell them to swap manually first. Returns tx hash, amount repaid, asset, and remaining debt. Payment Stream: bundleable \u2014 when paired with another bundleable write in the same request (e.g. "repay debt then withdraw the rest"), emit all calls in the same assistant turn so the engine collapses them into one atomic PTB the user signs once.',
+  description: 'Repay outstanding USDC or USDsui debt. Always call balance_check first to know the debt amount + which asset is owed (savings_info shows per-asset borrow positions). Pass asset="USDC" or asset="USDsui" to target a specific debt. When omitted, repays the highest-APY borrow first. Important: a USDsui debt MUST be repaid with USDsui (and USDC debt with USDC) \u2014 the SDK fetches the correct coin type for the targeted asset, but the user must hold enough of that stable in their wallet. If the user has only the wrong stable, do NOT auto-swap \u2014 tell them to swap manually first. Returns tx hash, amount repaid, asset, and remaining debt. Payment Intent: composable \u2014 when paired with another composable write in the same request (e.g. "repay debt then withdraw the rest"), emit all calls in the same assistant turn so the engine compiles them into one atomic Payment Intent the user signs once.',
   inputSchema: z.object({
     amount: z.number().positive(),
     asset: z.enum(REPAY_ASSETS).optional().describe('"USDC" or "USDsui". When omitted, repays the highest-APY borrow first.')
@@ -3357,7 +3357,7 @@ function formatAmount(amount) {
 }
 var claimRewardsTool = buildTool({
   name: "claim_rewards",
-  description: 'Claim all pending protocol rewards across lending adapters. Returns the claimed reward breakdown (per-asset symbol + amount), total USD value (best effort \u2014 may be 0 when oracle prices are unavailable), and the on-chain tx hash. When the rewards list is empty the response will explicitly say "no pending rewards"; when it is non-empty narrate the per-symbol amounts even if totalValueUsd is 0 (the on-chain credit still happened). Payment Stream: bundleable \u2014 when paired with another bundleable write in the same request (e.g. "claim rewards and stake them"), emit all calls in the same assistant turn so the engine collapses them into one atomic PTB the user signs once.',
+  description: 'Claim all pending protocol rewards across lending adapters. Returns the claimed reward breakdown (per-asset symbol + amount), total USD value (best effort \u2014 may be 0 when oracle prices are unavailable), and the on-chain tx hash. When the rewards list is empty the response will explicitly say "no pending rewards"; when it is non-empty narrate the per-symbol amounts even if totalValueUsd is 0 (the on-chain credit still happened). Payment Intent: composable \u2014 when paired with another composable write in the same request (e.g. "claim rewards and stake them"), emit all calls in the same assistant turn so the engine compiles them into one atomic Payment Intent the user signs once.',
   inputSchema: z.object({}),
   jsonSchema: { type: "object", properties: {}, required: [] },
   isReadOnly: false,
@@ -3617,7 +3617,7 @@ var mppServicesTool = buildTool({
 });
 var swapExecuteTool = buildTool({
   name: "swap_execute",
-  description: 'Swap tokens on Sui via Cetus Aggregator (20+ DEXs). Supports any token pair with liquidity. Use user-friendly names (SUI, USDC, CETUS, DEEP, etc.) or full coin types. Payment Stream: bundleable \u2014 when paired with another bundleable write in the same request (e.g. "swap to USDC and save", "swap and send to Mom"), emit all calls in the same assistant turn so the engine collapses them into one atomic PTB the user signs once.',
+  description: 'Swap tokens on Sui via Cetus Aggregator (20+ DEXs). Supports any token pair with liquidity. Use user-friendly names (SUI, USDC, CETUS, DEEP, etc.) or full coin types. Payment Intent: composable \u2014 when paired with another composable write in the same request (e.g. "swap to USDC and save", "swap and send to Mom"), emit all calls in the same assistant turn so the engine compiles them into one atomic Payment Intent the user signs once.',
   inputSchema: z.object({
     from: z.string().describe('Source token (e.g. "SUI", "USDC", or full coin type)'),
     to: z.string().describe('Target token (e.g. "USDC", "CETUS", or full coin type)'),
@@ -3724,7 +3724,7 @@ var swapQuoteTool = buildTool({
 });
 var voloStakeTool = buildTool({
   name: "volo_stake",
-  description: 'Stake SUI for vSUI via VOLO liquid staking. Earn ~3-5% APY. Rewards compound automatically via exchange rate \u2014 no claiming needed. Minimum 1 SUI. Payment Stream: bundleable \u2014 when paired with another bundleable write in the same request (e.g. "swap USDC to SUI and stake"), emit all calls in the same assistant turn so the engine collapses them into one atomic PTB the user signs once.',
+  description: 'Stake SUI for vSUI via VOLO liquid staking. Earn ~3-5% APY. Rewards compound automatically via exchange rate \u2014 no claiming needed. Minimum 1 SUI. Payment Intent: composable \u2014 when paired with another composable write in the same request (e.g. "swap USDC to SUI and stake"), emit all calls in the same assistant turn so the engine compiles them into one atomic Payment Intent the user signs once.',
   inputSchema: z.object({
     amount: z.number().min(1).describe("Amount of SUI to stake (minimum 1)")
   }),
@@ -3755,7 +3755,7 @@ var voloStakeTool = buildTool({
 });
 var voloUnstakeTool = buildTool({
   name: "volo_unstake",
-  description: 'Unstake vSUI back to SUI. Returns SUI including accumulated yield. Use amount in vSUI units or "all" to unstake entire position. Payment Stream: bundleable \u2014 when paired with another bundleable write in the same request (e.g. "unstake vSUI and send to Mom"), emit all calls in the same assistant turn so the engine collapses them into one atomic PTB the user signs once.',
+  description: 'Unstake vSUI back to SUI. Returns SUI including accumulated yield. Use amount in vSUI units or "all" to unstake entire position. Payment Intent: composable \u2014 when paired with another composable write in the same request (e.g. "unstake vSUI and send to Mom"), emit all calls in the same assistant turn so the engine compiles them into one atomic Payment Intent the user signs once.',
   inputSchema: z.object({
     amount: z.union([z.number().positive(), z.literal("all")]).describe('Amount of vSUI to unstake, or "all"')
   }),
@@ -5447,6 +5447,13 @@ Only offer to execute actions you have tools for. If you retrieved a quote, data
 - If user wants to save a non-saveable token, tell them to swap to USDC or USDsui first. Do NOT auto-chain swap + deposit.
 - Repay symmetry: a USDsui debt MUST be repaid with USDsui (and USDC debt with USDC). When calling repay_debt, pass asset="USDsui" if the borrow is USDsui. If the user asks "repay my debt" and savings_info shows borrows in BOTH stables, list both and ask which to repay first. If the user holds the wrong stable, tell them to swap manually \u2014 do NOT auto-chain swap + repay.
 
+## Fees (critical \u2014 never deny having fees)
+- **Swap:** 0.1% Audric overlay fee on the output amount, taken by the aggregator and sent to the Audric treasury. The Cetus DEX fee (typically 0.01\u20130.25%) is separate and goes to the DEX. Both are shown on the swap card. Never say Audric takes no cut on swaps \u2014 it does.
+- **Save (deposit):** 0.1% Audric fee on the deposit amount, taken atomically in the same transaction.
+- **Borrow:** 0.05% Audric fee on the borrow amount, taken atomically in the same transaction.
+- **Withdraw / Repay / Send / Receive:** No Audric fee. Gas is sponsored (free to the user).
+- When a user asks about fees, quote the above. Do NOT say "I don't take a cut", "fees are zero", "all your value stays with you", or "I'm here to execute, not extract" \u2014 those are incorrect for swap, save, and borrow.
+
 ## Multi-step flows
 - "How much X for Y?": swap_quote first, then swap_execute if user confirms.
 - "Swap then save": swap_execute \u2192 balance_check \u2192 save_deposit. Confirm each step.
@@ -8619,11 +8626,11 @@ var RecipeRegistry = class {
       const gateNote = step.gate && step.gate !== "none" ? ` [GATE: ${step.gate}]` : "";
       if (showBundleHeader && step.bundle === true && !openedBundleHeader) {
         lines.push(
-          "PAYMENT STREAM \u2014 emit ALL the following bundleable writes as parallel `tool_use` blocks IN THE SAME ASSISTANT TURN. The engine collapses them into ONE atomic PTB the user signs once. Do NOT execute step-by-step across turns:"
+          "PAYMENT INTENT \u2014 emit ALL the following composable writes as parallel `tool_use` blocks IN THE SAME ASSISTANT TURN. The engine compiles them into ONE atomic Payment Intent the user signs once. Do NOT execute step-by-step across turns:"
         );
         openedBundleHeader = true;
       }
-      const bundleTag = showBundleHeader && step.bundle === true ? " [PAYMENT STREAM]" : "";
+      const bundleTag = showBundleHeader && step.bundle === true ? " [PAYMENT INTENT]" : "";
       let line = `${num}. ${step.name}${toolNote}${serviceNote}${costNote}${gateNote}${bundleTag}`;
       if (step.gate_prompt) {
         line += ` \u2014 "${step.gate_prompt}"`;
@@ -9524,6 +9531,6 @@ function sanitizeAnthropicMessages(messages) {
   return merged;
 }
 
-export { AnthropicProvider, BalanceTracker, CANVAS_TEMPLATES, ContextBudget, CostTracker, DEFAULT_GUARD_CONFIG, DEFAULT_LEASE_SEC, DEFAULT_PERMISSION_CONFIG, DEFAULT_POLL_BUDGET_MS, DEFAULT_POLL_INTERVAL_MS, DEFAULT_SYSTEM_PROMPT, DEFAULT_TOOL_TTL_MS, EFFORT_THINKING_BUDGET_CAPS, EarlyToolDispatcher, InMemoryDefiCacheStore, InMemoryFetchLock, InMemoryNaviCacheStore, InMemoryWalletCacheStore, InvalidAddressError, MAX_BUNDLE_OPS, McpClientManager, McpResponseCache, MemorySessionStore, NAVI_ADDR_TTL_SEC, NAVI_MCP_CONFIG, NAVI_MCP_URL, NAVI_RATES_TTL_SEC, NAVI_SERVER_NAME, NaviTools, PERMISSION_PRESETS, QueryEngine, READ_TOOLS, REGENERATABLE_READ_TOOLS, RecipeRegistry, RetryTracker, SUINS_NAME_REGEX, SUI_ADDRESS_REGEX, SUI_ADDRESS_STRICT_REGEX, SuinsNotRegisteredError, SuinsRpcError, TOOL_FLAGS, TOOL_MODIFIABLE_FIELDS, TOOL_TTL_MS, TxMutex, VALID_PAIRS, WRITE_TOOLS, _resetNaviCircuitBreaker, activitySummaryTool, adaptAllMcpTools, adaptAllServerTools, adaptMcpTool, applyToolFlags, awaitOrFetch, balanceCheckTool, borrowTool, budgetToolResult, buildCachedSystemPrompt, buildMcpTools, buildProactivenessInstructions, buildProfileContext, buildSelfEvaluationInstruction, buildStateContext, buildTool, bundleShortestTtl, checkValidPair, claimRewardsTool, clampThinkingForEffort, classifyEffort, clearPortfolioCache, clearPortfolioCacheFor, clearPriceMapCache, compactMessages, createGuardRunnerState, engineToSSE, estimateTokens, explainTxTool, extractConversationText, extractMcpText, fetchAddressDefiPortfolio, fetchAddressPortfolio, fetchAudricHistory, fetchAudricPortfolio, fetchAvailableRewards, fetchBalance, fetchHealthFactor, fetchPositions, fetchProtocolStats, fetchRates, fetchSavings, fetchTokenPrices, fetchWalletCoins, findTool, getAudricApiBase, getDefaultTools, getDefiCacheStore, getFetchLock, getMcpManager, getModifiableFields, getNaviCacheStore, getTelemetrySink, getToolFlags, getWalletAddress, getWalletCacheStore, guardArtifactPreview, guardStaleData, harnessShapeForEffort, hasNaviMcp, healthCheckTool, isBundleableTool, loadRecipes, looksLikeSuiNs, microcompact, mppServicesTool, naviKey, normalizeAddressInput, parseEvalSummary, parseMcpJson, parseRecipe, parseSSE, payApiTool, portfolioAnalysisTool, protocolDeepDiveTool, ratesInfoTool, regenerateBundle, registerEngineTools, renderCanvasTool, repayDebtTool, requireAgent, resetDefiCacheStore, resetFetchLock, resetNaviCacheStore, resetTelemetrySink, resetWalletCacheStore, resolveAddressToSuinsViaRpc, resolvePermissionTier, resolveSuinsTool, resolveSuinsViaRpc, resolveUsdValue, runGuards, runTools, saveContactTool, saveDepositTool, savingsInfoTool, sendTransferTool, serializeSSE, setDefiCacheStore, setFetchLock, setNaviCacheStore, setTelemetrySink, setWalletCacheStore, spendingAnalyticsTool, swapExecuteTool, swapQuoteTool, tokenPricesTool, toolNameToOperation, toolsToDefinitions, transactionHistoryTool, transformBalance, transformHealthFactor, transformPositions, transformRates, transformRewards, transformSavings, updateGuardStateAfterToolResult, updateTodoTool, validateHistory, voloStakeTool, voloStatsTool, voloUnstakeTool, webSearchTool, withdrawTool, yieldSummaryTool };
+export { AnthropicProvider, BalanceTracker, CANVAS_TEMPLATES, ContextBudget, CostTracker, DEFAULT_GUARD_CONFIG, DEFAULT_LEASE_SEC, DEFAULT_PERMISSION_CONFIG, DEFAULT_POLL_BUDGET_MS, DEFAULT_POLL_INTERVAL_MS, DEFAULT_SYSTEM_PROMPT, DEFAULT_TOOL_TTL_MS, EFFORT_THINKING_BUDGET_CAPS, EarlyToolDispatcher, InMemoryDefiCacheStore, InMemoryFetchLock, InMemoryNaviCacheStore, InMemoryWalletCacheStore, InvalidAddressError, MAX_BUNDLE_OPS, McpClientManager, McpResponseCache, MemorySessionStore, NAVI_ADDR_TTL_SEC, NAVI_MCP_CONFIG, NAVI_MCP_URL, NAVI_RATES_TTL_SEC, NAVI_SERVER_NAME, NaviTools, PERMISSION_PRESETS, QueryEngine, READ_TOOLS, REGENERATABLE_READ_TOOLS, RecipeRegistry, RetryTracker, SUINS_NAME_REGEX, SUI_ADDRESS_REGEX, SUI_ADDRESS_STRICT_REGEX, SuinsNotRegisteredError, SuinsRpcError, TOOL_FLAGS, TOOL_MODIFIABLE_FIELDS, TOOL_TTL_MS, TxMutex, VALID_PAIRS, WRITE_TOOLS, _resetNaviCircuitBreaker, activitySummaryTool, adaptAllMcpTools, adaptAllServerTools, adaptMcpTool, applyToolFlags, awaitOrFetch, balanceCheckTool, borrowTool, budgetToolResult, buildCachedSystemPrompt, buildMcpTools, buildProactivenessInstructions, buildProfileContext, buildSelfEvaluationInstruction, buildStateContext, buildTool, bundleShortestTtl, checkValidPair, claimRewardsTool, clampThinkingForEffort, classifyEffort, clearPortfolioCache, clearPortfolioCacheFor, clearPriceMapCache, compactMessages, composeBundleFromToolResults, computeRegenerateFields, createGuardRunnerState, engineToSSE, estimateTokens, explainTxTool, extractConversationText, extractMcpText, fetchAddressDefiPortfolio, fetchAddressPortfolio, fetchAudricHistory, fetchAudricPortfolio, fetchAvailableRewards, fetchBalance, fetchHealthFactor, fetchPositions, fetchProtocolStats, fetchRates, fetchSavings, fetchTokenPrices, fetchWalletCoins, findTool, getAudricApiBase, getDefaultTools, getDefiCacheStore, getFetchLock, getMcpManager, getModifiableFields, getNaviCacheStore, getTelemetrySink, getToolFlags, getWalletAddress, getWalletCacheStore, guardArtifactPreview, guardStaleData, harnessShapeForEffort, hasNaviMcp, healthCheckTool, isBundleableTool, loadRecipes, looksLikeSuiNs, microcompact, mppServicesTool, naviKey, normalizeAddressInput, parseEvalSummary, parseMcpJson, parseRecipe, parseSSE, payApiTool, portfolioAnalysisTool, protocolDeepDiveTool, ratesInfoTool, regenerateBundle, registerEngineTools, renderCanvasTool, repayDebtTool, requireAgent, resetDefiCacheStore, resetFetchLock, resetNaviCacheStore, resetTelemetrySink, resetWalletCacheStore, resolveAddressToSuinsViaRpc, resolvePermissionTier, resolveSuinsTool, resolveSuinsViaRpc, resolveUsdValue, runGuards, runTools, saveContactTool, saveDepositTool, savingsInfoTool, sendTransferTool, serializeSSE, setDefiCacheStore, setFetchLock, setNaviCacheStore, setTelemetrySink, setWalletCacheStore, spendingAnalyticsTool, swapExecuteTool, swapQuoteTool, tokenPricesTool, toolNameToOperation, toolsToDefinitions, transactionHistoryTool, transformBalance, transformHealthFactor, transformPositions, transformRates, transformRewards, transformSavings, updateGuardStateAfterToolResult, updateTodoTool, validateHistory, voloStakeTool, voloStatsTool, voloUnstakeTool, webSearchTool, withdrawTool, yieldSummaryTool };
 //# sourceMappingURL=index.js.map
 //# sourceMappingURL=index.js.map