@swiftbrowser/wasm-sdk 0.0.0-stage → 0.9.0

package/wasm32-unknown-wasip1/swift.xctoolchain/usr/lib/swift_static/clang/include/xray/xray_interface.h

@@ -0,0 +1,178 @@
+//===- xray_interface.h -----------------------------------------*- C++ -*-===//
+//
+// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
+// See https://llvm.org/LICENSE.txt for license information.
+// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
+//
+//===----------------------------------------------------------------------===//
+//
+// This file is a part of XRay, a dynamic runtime instrumentation system.
+//
+// APIs for controlling XRay functionality explicitly.
+//===----------------------------------------------------------------------===//
+
+#ifndef XRAY_XRAY_INTERFACE_H
+#define XRAY_XRAY_INTERFACE_H
+
+#include <cstddef>
+#include <cstdint>
+
+extern "C" {
+
+/// Synchronize this with AsmPrinter::SledKind in LLVM.
+enum XRayEntryType {
+  ENTRY = 0,
+  EXIT = 1,
+  TAIL = 2,
+  LOG_ARGS_ENTRY = 3,
+  CUSTOM_EVENT = 4,
+  TYPED_EVENT = 5,
+};
+
+/// Provide a function to invoke for when instrumentation points are hit. This
+/// is a user-visible control surface that overrides the default implementation.
+/// The function provided should take the following arguments:
+///
+///   - function id: an identifier that indicates the id of a function; this id
+///                  is generated by xray; the mapping between the function id
+///                  and the actual function pointer is available through
+///                  __xray_table.
+///   - entry type: identifies what kind of instrumentation point was
+///                 encountered (function entry, function exit, etc.). See the
+///                 enum XRayEntryType for more details.
+///
+/// The user handler must handle correctly spurious calls after this handler is
+/// removed or replaced with another handler, because it would be too costly for
+/// XRay runtime to avoid spurious calls.
+/// To prevent circular calling, the handler function itself and all its
+/// direct&indirect callees must not be instrumented with XRay, which can be
+/// achieved by marking them all with: __attribute__((xray_never_instrument))
+///
+/// Returns 1 on success, 0 on error.
+extern int __xray_set_handler(void (*entry)(int32_t, XRayEntryType));
+
+/// This removes whatever the currently provided handler is. Returns 1 on
+/// success, 0 on error.
+extern int __xray_remove_handler();
+
+/// Use XRay to log the first argument of each (instrumented) function call.
+/// When this function exits, all threads will have observed the effect and
+/// start logging their subsequent affected function calls (if patched).
+///
+/// Returns 1 on success, 0 on error.
+extern int __xray_set_handler_arg1(void (*entry)(int32_t, XRayEntryType,
+                                                 uint64_t));
+
+/// Disables the XRay handler used to log first arguments of function calls.
+/// Returns 1 on success, 0 on error.
+extern int __xray_remove_handler_arg1();
+
+/// Provide a function to invoke when XRay encounters a custom event.
+extern int __xray_set_customevent_handler(void (*entry)(void *, std::size_t));
+
+/// This removes whatever the currently provided custom event handler is.
+/// Returns 1 on success, 0 on error.
+extern int __xray_remove_customevent_handler();
+
+/// Set a handler for xray typed event logging. The first parameter is a type
+/// identifier, the second is a payload, and the third is the payload size.
+/// NOTE: fdrLoggingHandleTypedEvent only supports uint16_t event type.
+extern int __xray_set_typedevent_handler(void (*entry)(size_t, const void *,
+                                                       size_t));
+
+/// Removes the currently set typed event handler.
+/// Returns 1 on success, 0 on error.
+extern int __xray_remove_typedevent_handler();
+
+extern uint16_t __xray_register_event_type(const char *event_type);
+
+enum XRayPatchingStatus {
+  NOT_INITIALIZED = 0,
+  SUCCESS = 1,
+  ONGOING = 2,
+  FAILED = 3,
+};
+
+/// This tells XRay to patch the instrumentation points in all currently loaded
+/// objects. See XRayPatchingStatus for possible result values.
+extern XRayPatchingStatus __xray_patch();
+
+/// This tells XRay to patch the instrumentation points in the given object.
+/// See XRayPatchingStatus for possible result values.
+extern XRayPatchingStatus __xray_patch_object(int32_t ObjId);
+
+/// Reverses the effect of __xray_patch(). See XRayPatchingStatus for possible
+/// result values.
+extern XRayPatchingStatus __xray_unpatch();
+
+/// Reverses the effect of __xray_patch_object. See XRayPatchingStatus for
+/// possible result values.
+extern XRayPatchingStatus __xray_unpatch_object(int32_t ObjId);
+
+/// This unpacks the given (packed) function id and patches
+/// the corresponding function.  See XRayPatchingStatus for possible
+/// result values.
+extern XRayPatchingStatus __xray_patch_function(int32_t FuncId);
+
+/// This patches a specific function in the given object. See XRayPatchingStatus
+/// for possible result values.
+extern XRayPatchingStatus __xray_patch_function_in_object(int32_t FuncId,
+                                                          int32_t ObjId);
+
+/// This unpacks the given (packed) function id and unpatches
+/// the corresponding function. See XRayPatchingStatus for possible
+/// result values.
+extern XRayPatchingStatus __xray_unpatch_function(int32_t FuncId);
+
+/// This unpatches a specific function in the given object.
+/// See XRayPatchingStatus for possible result values.
+extern XRayPatchingStatus __xray_unpatch_function_in_object(int32_t FuncId,
+                                                            int32_t ObjId);
+
+/// This function unpacks the given (packed) function id and returns the address
+/// of the corresponding function. We return 0 if we encounter any error, even
+/// if 0 may be a valid function address.
+extern uintptr_t __xray_function_address(int32_t FuncId);
+
+/// This function returns the address of the function in the given object
+/// provided valid function and object ids. We return 0 if we encounter any
+/// error, even if 0 may be a valid function address.
+extern uintptr_t __xray_function_address_in_object(int32_t FuncId,
+                                                   int32_t ObjId);
+
+/// This function returns the maximum valid function id for the main executable
+/// (object id = 0). Returns 0 if we encounter errors (when there are no
+/// instrumented functions, etc.).
+extern size_t __xray_max_function_id();
+
+/// This function returns the maximum valid function id for the given object.
+/// Returns 0 if we encounter errors (when there are no instrumented functions,
+/// etc.).
+extern size_t __xray_max_function_id_in_object(int32_t ObjId);
+
+/// This function returns the number of previously registered objects
+/// (executable + loaded DSOs). Returns 0 if XRay has not been initialized.
+extern size_t __xray_num_objects();
+
+/// Unpacks the function id from the given packed id.
+extern int32_t __xray_unpack_function_id(int32_t PackedId);
+
+/// Unpacks the object id from the given packed id.
+extern int32_t __xray_unpack_object_id(int32_t PackedId);
+
+/// Creates and returns a packed id from the given function and object ids.
+/// If the ids do not fit within the reserved number of bits for each part, the
+/// high bits are truncated.
+extern int32_t __xray_pack_id(int32_t FuncId, int32_t ObjId);
+
+/// Initialize the required XRay data structures. This is useful in cases where
+/// users want to control precisely when the XRay instrumentation data
+/// structures are initialized, for example when the XRay library is built with
+/// the XRAY_NO_PREINIT preprocessor definition.
+///
+/// Calling __xray_init() more than once is safe across multiple threads.
+extern void __xray_init();
+
+} // end extern "C"
+
+#endif // XRAY_XRAY_INTERFACE_H

package/wasm32-unknown-wasip1/swift.xctoolchain/usr/lib/swift_static/clang/include/xray/xray_log_interface.h

@@ -0,0 +1,357 @@
+//===-- xray_log_interface.h ----------------------------------------------===//
+//
+// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
+// See https://llvm.org/LICENSE.txt for license information.
+// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
+//
+//===----------------------------------------------------------------------===//
+//
+// This file is a part of XRay, a function call tracing system.
+//
+// APIs for installing a new logging implementation.
+//
+//===----------------------------------------------------------------------===//
+///
+/// XRay allows users to implement their own logging handlers and install them
+/// to replace the default runtime-controllable implementation that comes with
+/// compiler-rt/xray. The "flight data recorder" (FDR) mode implementation uses
+/// this API to install itself in an XRay-enabled binary. See
+/// compiler-rt/lib/xray_fdr_logging.{h,cc} for details of that implementation.
+///
+/// The high-level usage pattern for these APIs look like the following:
+///
+///   // We choose the mode which we'd like to install, and check whether this
+///   // has succeeded. Each mode will have their own set of flags they will
+///   // support, outside of the global XRay configuration options that are
+///   // defined in the XRAY_OPTIONS environment variable.
+///   auto select_status = __xray_log_select_mode("xray-fdr");
+///   if (select_status != XRayLogRegisterStatus::XRAY_REGISTRATION_OK) {
+///     // This failed, we should not proceed with attempting to initialise
+///     // the currently selected mode.
+///     return;
+///   }
+///
+///   // Once that's done, we can now attempt to configure the implementation.
+///   // To do this, we provide the string flags configuration for the mode.
+///   auto config_status = __xray_log_init_mode(
+///       "xray-fdr", "verbosity=1 some_flag=1 another_flag=2");
+///   if (config_status != XRayLogInitStatus::XRAY_LOG_INITIALIZED) {
+///     // deal with the error here, if there is one.
+///   }
+///
+///   // When the log implementation has had the chance to initialize, we can
+///   // now patch the instrumentation points. Note that we could have patched
+///   // the instrumentation points first, but there's no strict ordering to
+///   // these operations.
+///   auto patch_status = __xray_patch();
+///   if (patch_status != XRayPatchingStatus::SUCCESS) {
+///     // deal with the error here, if it is an error.
+///   }
+///
+///   // If we want to stop the implementation, we can then finalize it (before
+///   // optionally flushing the log).
+///   auto fin_status = __xray_log_finalize();
+///   if (fin_status != XRayLogInitStatus::XRAY_LOG_FINALIZED) {
+///     // deal with the error here, if it is an error.
+///   }
+///
+///   // We can optionally wait before flushing the log to give other threads a
+///   // chance to see that the implementation is already finalized. Also, at
+///   // this point we can optionally unpatch the instrumentation points to
+///   // reduce overheads at runtime.
+///   auto unpatch_status = __xray_unpatch();
+///   if (unpatch_status != XRayPatchingStatus::SUCCESS) {
+///     // deal with the error here, if it is an error.
+///   }
+///
+///   // If there are logs or data to be flushed somewhere, we can do so only
+///   // after we've finalized the log. Some implementations may not actually
+///   // have anything to log (it might keep the data in memory, or periodically
+///   // be logging the data anyway).
+///   auto flush_status = __xray_log_flushLog();
+///   if (flush_status != XRayLogFlushStatus::XRAY_LOG_FLUSHED) {
+///     // deal with the error here, if it is an error.
+///   }
+///
+///   // Alternatively, we can go through the buffers ourselves without
+///   // relying on the implementations' flushing semantics (if the
+///   // implementation supports exporting this data directly).
+///   auto MyBufferProcessor = +[](const char* mode, XRayBuffer buffer) {
+///     // Check the "mode" to see if it's something we know how to handle...
+///     // and/or do something with an XRayBuffer instance.
+///   };
+///   auto process_status = __xray_log_process_buffers(MyBufferProcessor);
+///   if (process_status != XRayLogFlushStatus::XRAY_LOG_FLUSHED) {
+///     // deal with the error here, if it is an error.
+///   }
+///
+/// NOTE: Before calling __xray_patch() again, consider re-initializing the
+/// implementation first. Some implementations might stay in an "off" state when
+/// they are finalized, while some might be in an invalid/unknown state.
+///
+#ifndef XRAY_XRAY_LOG_INTERFACE_H
+#define XRAY_XRAY_LOG_INTERFACE_H
+
+#include "xray/xray_interface.h"
+#include <stddef.h>
+
+extern "C" {
+
+/// This enum defines the valid states in which the logging implementation can
+/// be at.
+enum XRayLogInitStatus {
+  /// The default state is uninitialized, and in case there were errors in the
+  /// initialization, the implementation MUST return XRAY_LOG_UNINITIALIZED.
+  XRAY_LOG_UNINITIALIZED = 0,
+
+  /// Some implementations support multi-stage init (or asynchronous init), and
+  /// may return XRAY_LOG_INITIALIZING to signal callers of the API that
+  /// there's an ongoing initialization routine running. This allows
+  /// implementations to support concurrent threads attempting to initialize,
+  /// while only signalling success in one.
+  XRAY_LOG_INITIALIZING = 1,
+
+  /// When an implementation is done initializing, it MUST return
+  /// XRAY_LOG_INITIALIZED. When users call `__xray_patch()`, they are
+  /// guaranteed that the implementation installed with
+  /// `__xray_set_log_impl(...)` has been initialized.
+  XRAY_LOG_INITIALIZED = 2,
+
+  /// Some implementations might support multi-stage finalization (or
+  /// asynchronous finalization), and may return XRAY_LOG_FINALIZING to signal
+  /// callers of the API that there's an ongoing finalization routine running.
+  /// This allows implementations to support concurrent threads attempting to
+  /// finalize, while only signalling success/completion in one.
+  XRAY_LOG_FINALIZING = 3,
+
+  /// When an implementation is done finalizing, it MUST return
+  /// XRAY_LOG_FINALIZED. It is up to the implementation to determine what the
+  /// semantics of a finalized implementation is. Some implementations might
+  /// allow re-initialization once the log is finalized, while some might always
+  /// be on (and that finalization is a no-op).
+  XRAY_LOG_FINALIZED = 4,
+};
+
+/// This enum allows an implementation to signal log flushing operations via
+/// `__xray_log_flushLog()`, and the state of flushing the log.
+enum XRayLogFlushStatus {
+  XRAY_LOG_NOT_FLUSHING = 0,
+  XRAY_LOG_FLUSHING = 1,
+  XRAY_LOG_FLUSHED = 2,
+};
+
+/// This enum indicates the installation state of a logging implementation, when
+/// associating a mode to a particular logging implementation through
+/// `__xray_log_register_impl(...)` or through `__xray_log_select_mode(...`.
+enum XRayLogRegisterStatus {
+  XRAY_REGISTRATION_OK = 0,
+  XRAY_DUPLICATE_MODE = 1,
+  XRAY_MODE_NOT_FOUND = 2,
+  XRAY_INCOMPLETE_IMPL = 3,
+};
+
+/// A valid XRay logging implementation MUST provide all of the function
+/// pointers in XRayLogImpl when being installed through `__xray_set_log_impl`.
+/// To be precise, ALL the functions pointers MUST NOT be nullptr.
+struct XRayLogImpl {
+  /// The log initialization routine provided by the implementation, always
+  /// provided with the following parameters:
+  ///
+  ///   - buffer size (unused)
+  ///   - maximum number of buffers (unused)
+  ///   - a pointer to an argument struct that the implementation MUST handle
+  ///   - the size of the argument struct
+  ///
+  /// See XRayLogInitStatus for details on what the implementation MUST return
+  /// when called.
+  ///
+  /// If the implementation needs to install handlers aside from the 0-argument
+  /// function call handler, it MUST do so in this initialization handler.
+  ///
+  /// See xray_interface.h for available handler installation routines.
+  XRayLogInitStatus (*log_init)(size_t, size_t, void *, size_t);
+
+  /// The log finalization routine provided by the implementation.
+  ///
+  /// See XRayLogInitStatus for details on what the implementation MUST return
+  /// when called.
+  XRayLogInitStatus (*log_finalize)();
+
+  /// The 0-argument function call handler. XRay logging implementations MUST
+  /// always have a handler for function entry and exit events. In case the
+  /// implementation wants to support arg1 (or other future extensions to XRay
+  /// logging) those MUST be installed by the installed 'log_init' handler.
+  ///
+  /// Because we didn't want to change the ABI of this struct, the arg1 handler
+  /// may be silently overwritten during initialization as well.
+  void (*handle_arg0)(int32_t, XRayEntryType);
+
+  /// The log implementation provided routine for when __xray_log_flushLog() is
+  /// called.
+  ///
+  /// See XRayLogFlushStatus for details on what the implementation MUST return
+  /// when called.
+  XRayLogFlushStatus (*flush_log)();
+};
+
+/// DEPRECATED: Use the mode registration workflow instead with
+/// __xray_log_register_mode(...) and __xray_log_select_mode(...). See the
+/// documentation for those function.
+///
+/// This function installs a new logging implementation that XRay will use. In
+/// case there are any nullptr members in Impl, XRay will *uninstall any
+/// existing implementations*. It does NOT patch the instrumentation points.
+///
+/// NOTE: This function does NOT attempt to finalize the currently installed
+/// implementation. Use with caution.
+///
+/// It is guaranteed safe to call this function in the following states:
+///
+///   - When the implementation is UNINITIALIZED.
+///   - When the implementation is FINALIZED.
+///   - When there is no current implementation installed.
+///
+/// It is logging implementation defined what happens when this function is
+/// called while in any other states.
+void __xray_set_log_impl(XRayLogImpl Impl);
+
+/// This function registers a logging implementation against a "mode"
+/// identifier. This allows multiple modes to be registered, and chosen at
+/// runtime using the same mode identifier through
+/// `__xray_log_select_mode(...)`.
+///
+/// We treat the Mode identifier as a null-terminated byte string, as the
+/// identifier used when retrieving the log impl.
+///
+/// Returns:
+///   - XRAY_REGISTRATION_OK on success.
+///   - XRAY_DUPLICATE_MODE when an implementation is already associated with
+///     the provided Mode; does not update the already-registered
+///     implementation.
+XRayLogRegisterStatus __xray_log_register_mode(const char *Mode,
+                                               XRayLogImpl Impl);
+
+/// This function selects the implementation associated with Mode that has been
+/// registered through __xray_log_register_mode(...) and installs that
+/// implementation (as if through calling __xray_set_log_impl(...)). The same
+/// caveats apply to __xray_log_select_mode(...) as with
+/// __xray_log_set_log_impl(...).
+///
+/// Returns:
+///   - XRAY_REGISTRATION_OK on success.
+///   - XRAY_MODE_NOT_FOUND if there is no implementation associated with Mode;
+///     does not update the currently installed implementation.
+XRayLogRegisterStatus __xray_log_select_mode(const char *Mode);
+
+/// Returns an identifier for the currently selected XRay mode chosen through
+/// the __xray_log_select_mode(...) function call. Returns nullptr if there is
+/// no currently installed mode.
+const char *__xray_log_get_current_mode();
+
+/// This function removes the currently installed implementation. It will also
+/// uninstall any handlers that have been previously installed. It does NOT
+/// unpatch the instrumentation points.
+///
+/// NOTE: This function does NOT attempt to finalize the currently installed
+/// implementation. Use with caution.
+///
+/// It is guaranteed safe to call this function in the following states:
+///
+///   - When the implementation is UNINITIALIZED.
+///   - When the implementation is FINALIZED.
+///   - When there is no current implementation installed.
+///
+/// It is logging implementation defined what happens when this function is
+/// called while in any other states.
+void __xray_remove_log_impl();
+
+/// DEPRECATED: Use __xray_log_init_mode() instead, and provide all the options
+/// in string form.
+/// Invokes the installed implementation initialization routine. See
+/// XRayLogInitStatus for what the return values mean.
+XRayLogInitStatus __xray_log_init(size_t BufferSize, size_t MaxBuffers,
+                                  void *Args, size_t ArgsSize);
+
+/// Invokes the installed initialization routine, which *must* support the
+/// string based form.
+///
+/// NOTE: When this API is used, we still invoke the installed initialization
+/// routine, but we will call it with the following convention to signal that we
+/// are using the string form:
+///
+/// - BufferSize = 0
+/// - MaxBuffers = 0
+/// - ArgsSize = 0
+/// - Args will be the pointer to the character buffer representing the
+///   configuration.
+///
+/// FIXME: Updating the XRayLogImpl struct is an ABI breaking change. When we
+/// are ready to make a breaking change, we should clean this up appropriately.
+XRayLogInitStatus __xray_log_init_mode(const char *Mode, const char *Config);
+
+/// Like __xray_log_init_mode(...) this version allows for providing
+/// configurations that might have non-null-terminated strings. This will
+/// operate similarly to __xray_log_init_mode, with the exception that
+/// |ArgsSize| will be what |ConfigSize| is.
+XRayLogInitStatus __xray_log_init_mode_bin(const char *Mode, const char *Config,
+                                           size_t ConfigSize);
+
+/// Invokes the installed implementation finalization routine. See
+/// XRayLogInitStatus for what the return values mean.
+XRayLogInitStatus __xray_log_finalize();
+
+/// Invokes the install implementation log flushing routine. See
+/// XRayLogFlushStatus for what the return values mean.
+XRayLogFlushStatus __xray_log_flushLog();
+
+/// An XRayBuffer represents a section of memory which can be treated by log
+/// processing functions as bytes stored in the logging implementation's
+/// buffers.
+struct XRayBuffer {
+  const void *Data;
+  size_t Size;
+};
+
+/// Registers an iterator function which takes an XRayBuffer argument, then
+/// returns another XRayBuffer function representing the next buffer. When the
+/// Iterator function returns an empty XRayBuffer (Data = nullptr, Size = 0),
+/// this signifies the end of the buffers.
+///
+/// The first invocation of this Iterator function will always take an empty
+/// XRayBuffer (Data = nullptr, Size = 0).
+void __xray_log_set_buffer_iterator(XRayBuffer (*Iterator)(XRayBuffer));
+
+/// Removes the currently registered buffer iterator function.
+void __xray_log_remove_buffer_iterator();
+
+/// Invokes the provided handler to process data maintained by the logging
+/// handler. This API will be provided raw access to the data available in
+/// memory from the logging implementation. The callback function must:
+///
+/// 1) Not modify the data, to avoid running into undefined behaviour.
+///
+/// 2) Either know the data layout, or treat the data as raw bytes for later
+///    interpretation.
+///
+/// This API is best used in place of the `__xray_log_flushLog()` implementation
+/// above to enable the caller to provide an alternative means of extracting the
+/// data from the XRay implementation.
+///
+/// Implementations MUST then provide:
+///
+/// 1) A function that will return an XRayBuffer. Functions that return an
+///    "empty" XRayBuffer signifies that there are no more buffers to be
+///    processed. This function should be registered through the
+///    `__xray_log_set_buffer_iterator(...)` function.
+///
+/// 2) Its own means of converting data it holds in memory into an XRayBuffer
+///    structure.
+///
+/// See XRayLogFlushStatus for what the return values mean.
+///
+XRayLogFlushStatus __xray_log_process_buffers(void (*Processor)(const char *,
+                                                                XRayBuffer));
+
+} // extern "C"
+
+#endif // XRAY_XRAY_LOG_INTERFACE_H

package/wasm32-unknown-wasip1/swift.xctoolchain/usr/lib/swift_static/clang/include/xray/xray_records.h

@@ -0,0 +1,134 @@
+//===-- xray_records.h ------------------------------------------*- C++ -*-===//
+//
+// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
+// See https://llvm.org/LICENSE.txt for license information.
+// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
+//
+//===----------------------------------------------------------------------===//
+//
+// This file is a part of XRay, a dynamic runtime instrumentation system.
+//
+// This header exposes some record types useful for the XRay in-memory logging
+// implementation.
+//
+//===----------------------------------------------------------------------===//
+
+#ifndef XRAY_XRAY_RECORDS_H
+#define XRAY_XRAY_RECORDS_H
+
+#include <cstdint>
+
+namespace __xray {
+
+enum FileTypes {
+  NAIVE_LOG = 0,
+  FDR_LOG = 1,
+};
+
+// FDR mode use of the union field in the XRayFileHeader.
+struct alignas(16) FdrAdditionalHeaderData {
+  uint64_t ThreadBufferSize;
+};
+
+static_assert(sizeof(FdrAdditionalHeaderData) == 16,
+              "FdrAdditionalHeaderData != 16 bytes");
+
+// This data structure is used to describe the contents of the file. We use this
+// for versioning the supported XRay file formats.
+struct alignas(32) XRayFileHeader {
+  uint16_t Version = 0;
+
+  // The type of file we're writing out. See the FileTypes enum for more
+  // information. This allows different implementations of the XRay logging to
+  // have different files for different information being stored.
+  uint16_t Type = 0;
+
+  // What follows are a set of flags that indicate useful things for when
+  // reading the data in the file.
+  bool ConstantTSC : 1;
+  bool NonstopTSC : 1;
+
+  // The frequency by which TSC increases per-second.
+  alignas(8) uint64_t CycleFrequency = 0;
+
+  union {
+    char FreeForm[16];
+    // The current civiltime timestamp, as retrieved from 'clock_gettime'. This
+    // allows readers of the file to determine when the file was created or
+    // written down.
+    struct timespec TS;
+
+    struct FdrAdditionalHeaderData FdrData;
+  };
+} __attribute__((packed));
+
+static_assert(sizeof(XRayFileHeader) == 32, "XRayFileHeader != 32 bytes");
+
+enum RecordTypes {
+  NORMAL = 0,
+  ARG_PAYLOAD = 1,
+};
+
+struct alignas(32) XRayRecord {
+  // This is the type of the record being written. We use 16 bits to allow us to
+  // treat this as a discriminant, and so that the first 4 bytes get packed
+  // properly. See RecordTypes for more supported types.
+  uint16_t RecordType = RecordTypes::NORMAL;
+
+  // The CPU where the thread is running. We assume number of CPUs <= 256.
+  uint8_t CPU = 0;
+
+  // The type of the event. One of the following:
+  //   ENTER = 0
+  //   EXIT = 1
+  //   TAIL_EXIT = 2
+  //   ENTER_ARG = 3
+  uint8_t Type = 0;
+
+  // The function ID for the record.
+  int32_t FuncId = 0;
+
+  // Get the full 8 bytes of the TSC when we get the log record.
+  uint64_t TSC = 0;
+
+  // The thread ID for the currently running thread.
+  uint32_t TId = 0;
+
+  // The ID of process that is currently running
+  uint32_t PId = 0;
+  
+  // Use some bytes in the end of the record for buffers.
+  char Buffer[8] = {};
+} __attribute__((packed));
+
+static_assert(sizeof(XRayRecord) == 32, "XRayRecord != 32 bytes");
+
+struct alignas(32) XRayArgPayload {
+  // We use the same 16 bits as a discriminant for the records in the log here
+  // too, and so that the first 4 bytes are packed properly.
+  uint16_t RecordType = RecordTypes::ARG_PAYLOAD;
+
+  // Add a few bytes to pad.
+  uint8_t Padding[2] = {};
+
+  // The function ID for the record.
+  int32_t FuncId = 0;
+
+  // The thread ID for the currently running thread.
+  uint32_t TId = 0;
+
+  // The ID of process that is currently running
+  uint32_t PId = 0;
+
+  // The argument payload.
+  uint64_t Arg = 0;
+
+  // The rest of this record ought to be left as padding.
+  uint8_t TailPadding[8] = {};
+} __attribute__((packed));
+
+static_assert(sizeof(XRayArgPayload) == 32, "XRayArgPayload != 32 bytes");
+
+} // namespace __xray
+
+#endif // XRAY_XRAY_RECORDS_H