@svgrid/grid 3.0.2 → 3.0.4

package/src/chart.ts

@@ -8,1331 +8,178 @@
  * (per-series type), a secondary (right) Y axis, signed Y domains (negative
  * values drop below a zero baseline), and nice auto-scaled ticks.
  */
-// The one import this module has. `Intl.NumberFormat` is expensive enough to
-// construct that a chart with 8 axis ticks and 200 data labels would rebuild it
-// 200 times a frame, and the grid already solved that for cells - so reuse that
-// cache rather than starting a second one. Still DOM-free: it is plain TS.
-import { getNumberFormatter } from './cell-formatting'
-
-/** Every mark this engine can draw. `bar`, `line` and `area` compose (a series
- *  can override the spec's type for a combo chart); the rest are whole-chart
- *  types that ignore per-series overrides. */
-export type ChartType =
-  | 'bar' | 'line' | 'area' | 'pie' | 'scatter'
-  | 'heatmap' | 'waterfall' | 'funnel' | 'radar'
-  | 'calendar' | 'gauge' | 'treemap' | 'sankey'
-  | 'candlestick' | 'ohlc' | 'boxplot'
-
-/** One open / high / low / close bar. */
-export type OhlcBar = { o: number; h: number; l: number; c: number }
-
-/** A five-number summary: one box, its whiskers, and anything past them.
- *  `min` / `max` are the WHISKER ENDS, not the extremes of the sample - with
- *  the usual 1.5 IQR rule those differ, and the points beyond go in
- *  `outliers` so they can be drawn individually. */
-export type BoxStats = {
-  min: number
-  q1: number
-  median: number
-  q3: number
-  max: number
-  /** Values outside the whiskers, drawn as individual points. */
-  outliers?: number[]
-}
-
-/** A clicked bar / point / slice - the payload of `SvGridChart`'s `onSelect`.
- *  `rowIds` is populated when the spec was built from grid rows (via
- *  `rowsToChartSpec`) and lets a drill handler filter the grid back to the
- *  source rows for the clicked category / series cell. */
-export type ChartSelection = {
-  category: string
-  series: string
-  value: number
-  rowIds?: Array<string | number>
-}
-
-/** A single scatter / bubble point. */
-export type ScatterPoint = { x: number; y: number; r?: number; label?: string }
-
-/** A statistical / smoothing line drawn on top of a source series.
- *  - `'linear'`: ordinary least-squares regression line
- *  - `'sma:N'`: simple moving average over a window of N points
- *  - `'ema:N'`: exponential moving average with smoothing factor 2/(N+1) */
-export type SeriesOverlay = 'linear' | `sma:${number}` | `ema:${number}`
-
-/** A texture fill applied in addition to (and on top of) the series color.
- *  Helps colorblind readers distinguish series at a glance. */
-export type SeriesPattern = 'solid' | 'stripe' | 'crosshatch' | 'dots' | 'diagonal'
-
-/** One plotted series: its label, its values (one per category), and how to draw it. */
-export type ChartSeries = {
-  label: string
-  values: number[]
-  color?: string
-  /** Per-series chart type, for combo charts. Defaults to the spec `type`. */
-  type?: 'bar' | 'line' | 'area' | 'candlestick' | 'ohlc' | 'boxplot'
-  /**
-   * Open / high / low / close per category, parallel to `categories`. `null`
-   * is a gap (a day with no session) and draws nothing.
-   *
-   * Set `values` to the CLOSING prices alongside this. Everything that reads a
-   * series generically reads `values` - the tooltip rows, the CSV export, the
-   * screen-reader table, and `overlay` - so filling it in is what lets a
-   * candlestick series carry a moving average (`overlay: 'sma:20'`) or export
-   * to CSV without a single line of candle-specific code.
-   */
-  ohlc?: Array<OhlcBar | null>
-  /**
-   * Five-number summaries per category, parallel to `categories`. `null` is a
-   * gap and draws nothing.
-   *
-   * Set `values` to the MEDIANS alongside this, for exactly the reason `ohlc`
-   * sets them to the closes: everything that reads a series generically reads
-   * `values`, so the tooltip rows, the CSV export, the screen-reader table and
-   * `overlay` all keep working with no box-specific code.
-   *
-   * `boxStats()` turns a raw sample into one of these.
-   */
-  boxes?: Array<BoxStats | null>
-  /**
-   * Symmetric or asymmetric error bars, parallel to `values`. A number is a
-   * symmetric +/- margin; a pair is an explicit low/high; `null` draws nothing.
-   *
-   * These are an ANNOTATION on an existing mark rather than a mark of their
-   * own, so they compose: a bar, line, area or scatter series can carry them
-   * without changing its type. That is the whole reason they are not a
-   * `ChartType` - "bar chart with error bars" should not be a different chart.
-   */
-  errors?: Array<number | { lo: number; hi: number } | null>
-  /** Plot against the left (default) or right Y axis. */
-  axis?: 'left' | 'right'
-  /** Scatter / bubble points (used when `type === 'scatter'`). */
-  points?: ScatterPoint[]
-  /** Row IDs contributing to each data point - parallel to `values`. When
-   *  present, click handlers receive these in `ChartSelection.rowIds` so
-   *  callers can drill the grid back to the source rows. */
-  rowIds?: Array<Array<string | number>>
-  /** Draw a smoothing / trend overlay on top of this series. */
-  overlay?: SeriesOverlay
-  /** Color for the overlay line. Defaults to the series color. */
-  overlayColor?: string
-  /** Texture fill (e.g. diagonal stripes) layered over the series color.
-   *  Lets colorblind viewers tell two series apart even at the same hue. */
-  pattern?: SeriesPattern
-  /** Interpolate the line as a curve instead of polylines. `'monotone'`
-   *  cubic prevents overshoots between points (best default for data);
-   *  `true` is an alias for `'monotone'`. Only meaningful for line/area. */
-  smooth?: boolean | 'monotone'
-  /** Upper envelope (e.g. forecast 95th percentile) parallel to `values`.
-   *  When set alongside `lowerValues`, the chart shades the band between
-   *  the two as a translucent fill in the series color. */
-  upperValues?: number[]
-  /** Lower envelope; pair with `upperValues` for a confidence band. */
-  lowerValues?: number[]
-}
-
-/** A pinned label drawn over the plot, anchored to a data point or to an
- *  arbitrary (x, y) in data space. Useful for "Release v1", "Outage", etc. */
-export type ChartAnnotation = {
-  /** Anchor in data space. Provide either `category` + `axis` for a point on
-   *  an existing series, OR raw `x` / `y` numeric coordinates in data space. */
-  at:
-    | { category: string; series?: string }
-    | { x: number; y?: number }
-  label: string
-  color?: string
-  /** Where the label sits relative to the marker. Defaults to 'top'. */
-  placement?: 'top' | 'bottom' | 'left' | 'right'
-}
-
-/** A horizontal reference / target line drawn across the plot. */
-export type ChartReferenceLine = {
-  value: number
-  label?: string
-  axis?: 'left' | 'right'
-  color?: string
-  dashed?: boolean
-}
-
-/**
- * What to plot - the input you build and hand to a chart. Categories are the
- * x-axis labels and every series supplies one value per category.
- *
- * {@link buildChart} turns this into a {@link ChartGeometry} for rendering.
- */
-export type ChartSpec = {
-  /** Default type for series that don't set their own `type`. */
-  type: ChartType
-  /** X-axis labels (one per data point). */
-  categories: string[]
-  series: ChartSeries[]
-  width?: number
-  height?: number
-  /** Palette used when a series has no explicit `color`. */
-  palette?: string[]
-  /** Per-category color overrides (by category label) - for pie / donut slice
-   *  recolouring, where colour follows the category, not a series. */
-  categoryColors?: Record<string, string>
-  /** Number format for the value axis, tooltips, data labels and reference
-   *  lines. Unset = the default compact `1.2k` / `1.2M` style. */
-  valueFormat?: ChartValueFormat
-  /** BCP-47 locale for value formatting. Setting this (or `currency`) switches
-   *  formatting to `Intl.NumberFormat`, so thousands separators, the decimal
-   *  mark and the compact suffixes follow the locale rather than the built-in
-   *  English `1.2k` / `1.2M`. Unset = the locale-free default, which is why the
-   *  default output has never changed under anyone's feet. */
-  locale?: string | ReadonlyArray<string>;
-  /** ISO 4217 code for `valueFormat: 'currency'` (`'EUR'`, `'JPY'`, ...). Unset
-   *  means the axis reads `$`, which is wrong everywhere outside the dollar
-   *  zone and was the only currency this chart could draw for a long time. */
-  currency?: string
-  /** Grouped (nested) category axis: a parent tier spanning consecutive leaf
-   *  categories (spans must sum to `categories.length`). Vertical category
-   *  charts only (ignored for time / horizontal / pie). */
-  categoryGroups?: Array<{ label: string; span: number }>
-  /** Stack bar / area series (per axis) instead of grouping them. */
-  stacked?: boolean
-  /** Stack to 100% (each category normalized to its total). Implies stacked. */
-  stacked100?: boolean
-  /**
-   * Bar orientation. `'horizontal'` swaps the axes - categories run down the
-   * left, bars grow rightward - which suits long category labels. Only applies
-   * when every series is a bar (combo / line / area fall back to vertical).
-   */
-  orientation?: 'vertical' | 'horizontal'
-  /** Pie only: inner radius as a fraction of the outer radius (0..1) -> donut. */
-  innerRadius?: number
-  /** Horizontal target / goal / average lines. */
-  referenceLines?: ChartReferenceLine[]
-  /**
-   * How to read `categories` along the x axis.
-   *
-   * - `'category'` (default): evenly spaced labels, taken literally.
-   * - `'time'`: parsed as dates and positioned by ACTUAL elapsed time, so an
-   *   irregular gap renders as a proportional gap.
-   * - `'ordinal-time'`: parsed as dates but spaced EVENLY, with date-derived
-   *   ticks. This is what a series of trading sessions or business days needs:
-   *   on a true time axis every weekend opens a hole a third as wide as the
-   *   working week, which is noise rather than information.
-   */
-  xType?: 'category' | 'time' | 'ordinal-time'
-  /** Axis titles (reserve gutter space + render). */
-  yAxisTitle?: string
-  y2AxisTitle?: string
-  xAxisTitle?: string
-  /** Y-axis scale. `'log'` plots base-10 logarithmic - values <= 0 are
-   *  treated as missing. Necessary for wide-range data (money, audience
-   *  size, scientific). Default `'linear'`. */
-  yScale?: 'linear' | 'log'
-  /** Right (secondary) Y-axis scale. Default `'linear'`. */
-  y2Scale?: 'linear' | 'log'
-  /** Pinned text labels at fixed data-space positions (callouts). */
-  annotations?: ChartAnnotation[]
-  /** When true, automatically cycle through pattern fills for every series
-   *  that doesn't set `pattern` explicitly. Useful as a one-flag colorblind
-   *  fallback. Default false. */
-  patternFallback?: boolean
-  /** Calendar heatmap: array of date+value samples (one per day). Date
-   *  strings are 'YYYY-MM-DD'. Missing days render as blank cells. */
-  calendarValues?: Array<{ date: string; value: number }>
-  /** Calendar heatmap: year window. Default: span the data. */
-  calendarStart?: string
-  calendarEnd?: string
-
-  /** Gauge: the value to display. */
-  gaugeValue?: number
-  /** Gauge: min/max of the dial scale. Defaults [0, 100]. */
-  gaugeMin?: number
-  gaugeMax?: number
-  /** Gauge: target marker (the line/notch on the arc). */
-  gaugeTarget?: number
-  /** Gauge: color bands along the arc (e.g. red/amber/green). */
-  gaugeRanges?: Array<{ from: number; to: number; color: string }>
-  /** Gauge: unit / suffix shown next to the value (e.g. '%', 'ms'). */
-  gaugeUnit?: string
-
-  /** Tree-map: hierarchical root. Leaves have `value`; parents are the
-   *  sum of their children's totals. */
-  treemap?: TreeNode
-
-  /** Sankey: nodes + flow links between them. Link `source` / `target`
-   *  reference node ids. */
-  sankeyNodes?: Array<{ id: string; label?: string; color?: string }>
-  sankeyLinks?: Array<{ source: string; target: string; value: number; color?: string }>
-
-  /** Waterfall: per-category flag marking bars as totals/subtotals that
-   *  reset the running sum and span from 0. Same length as `categories`. */
-  waterfallTotals?: boolean[]
-  /** Waterfall: explicit colors for positive/negative/total bars. The
-   *  series color is ignored when this is set. */
-  waterfallColors?: { positive?: string; negative?: string; total?: string }
-  /** Candlestick / OHLC colors. Direction beats series identity here, the same
-   *  way `waterfallColors` overrides the series color. Defaults to the green /
-   *  red pair from the palette's own vocabulary. */
-  candleColors?: { up?: string; down?: string }
-  /** Heatmap color scale. `'sequential'` maps min->max through one hue,
-   *  `'diverging'` runs cold->neutral->warm around 0. A custom array
-   *  (>=2 hex colors) defines an arbitrary gradient. Default `'sequential'`. */
-  colorScale?: 'sequential' | 'diverging' | string[]
-}
-
-/** A tree-map / sankey / treemap node spec. Used recursively as a tree. */
-export type TreeNode = {
-  name: string
-  value?: number
-  color?: string
-  children?: TreeNode[]
-}
-
-/** A laid-out tree-map rectangle. */
-export type ChartTreemapCell = {
-  x: number
-  y: number
-  w: number
-  h: number
-  color: string
-  textColor: string
-  name: string
-  value: number
-  /** Depth from the root - useful for color cycling per level. */
-  depth: number
-}
-
-/** A calendar-heatmap cell (one day). */
-export type ChartCalendarCell = {
-  x: number
-  y: number
-  size: number
-  date: string
-  value: number
-  /** Defined when a value was supplied for this day; blank otherwise. */
-  defined: boolean
-  color: string
-}
-
-/** A gauge dial layout. */
-export type ChartGaugeLayout = {
-  cx: number
-  cy: number
-  r: number
-  /** Track arc path (background grey). */
-  trackPath: string
-  /** Value arc path (filled to the current value). */
-  valuePath: string
-  /** Optional colored range arcs. */
-  rangePaths: Array<{ path: string; color: string; from: number; to: number }>
-  /** Pixel position of the target marker (when set). */
-  target: { x1: number; y1: number; x2: number; y2: number } | null
-  /** Tick marks around the dial (major ticks are longer). */
-  ticks: Array<{ x1: number; y1: number; x2: number; y2: number; major: boolean }>
-  /** Pointer needle (a kite shape) + its center hub radius. */
-  needle: { path: string; hubR: number }
-  /** Status color of the value arc (the band the value falls in), or null to
-   *  fall back to the theme accent. */
-  valueColor: string | null
-  /** Scale end labels positioned under the two arc ends. */
-  minLabel: { x: number; y: number }
-  maxLabel: { x: number; y: number }
-  value: number
-  min: number
-  max: number
-  unit: string
-}
-
-/** A sankey node + its laid-out rect + total flow. */
-export type ChartSankeyNode = {
-  id: string
-  label: string
-  color: string
-  x: number
-  y: number
-  w: number
-  h: number
-  /** Column (depth) the node was assigned to. */
-  column: number
-  totalIn: number
-  totalOut: number
-}
-
-/** A sankey link rendered as a curved ribbon. */
-export type ChartSankeyLink = {
-  path: string
-  color: string
-  /** Stroke width = link value scaled to pixels. */
-  width: number
-  source: string
-  target: string
-  value: number
-}
-
-/** A single funnel segment (trapezoid) in pixel space. */
-export type ChartFunnelSegment = {
-  /** Pre-built SVG path for the trapezoid. */
-  path: string
-  color: string
-  label: string
-  /** Original value (before any percentile normalisation). */
-  value: number
-  /** Conversion vs. first segment, 0..1. */
-  conversion: number
-  /** Drop-off from the previous segment, 0..1. */
-  dropoff: number
-  /** Centre point (label anchor). */
-  cx: number
-  cy: number
-  /** Auto-picked black/white contrast color for in-segment labels. */
-  textColor: string
-}
-
-/** A radar series' polygon: axis values + the closed polygon path. */
-export type ChartRadarSeries = {
-  label: string
-  color: string
-  path: string
-  /** Per-axis (x, y) endpoints so callers can draw dots / hit targets. */
-  points: Array<{ x: number; y: number; value: number; axis: string }>
-}
-
-/** Radar axis spoke + tick info. */
-export type ChartRadarAxis = {
-  label: string
-  /** Outermost endpoint of the spoke. */
-  x: number
-  y: number
-}
-
-/** A single heatmap rectangle in pixel space. */
-export type ChartHeatmapCell = {
-  x: number
-  y: number
-  w: number
-  h: number
-  color: string
-  /** Text color picked for contrast against `color`. */
-  textColor: string
-  value: number
-  rowLabel: string
-  colLabel: string
-}
-
-/**
- * One candlestick / OHLC bar in SVG coordinates.
- *
- * Kept apart from {@link ChartBar} rather than folded into it: bars pick up
- * series pattern fills, data labels and the brush mini-map, and all three are
- * wrong for a candle. A separate array means every existing loop over `bars`
- * keeps working untouched, which is the point of this flat geometry.
- */
-export type ChartCandle = {
-  /** Body rect left edge and width. In OHLC mode, the span of the two ticks. */
-  x: number
-  w: number
-  /** Wick line, and the OHLC bar's vertical. */
-  xCenter: number
-  yOpen: number
-  yClose: number
-  yHigh: number
-  yLow: number
-  /** Body rect, pre-ordered so the renderer does no min/max of its own. */
-  bodyY: number
-  bodyH: number
-  /** Close at or above open. Drives colour and hollow-vs-filled. */
-  up: boolean
-  color: string
-  label: string
-  series: string
-  o: number
-  h: number
-  l: number
-  c: number
-}
-
-/**
- * A laid-out box plot, in SVG coordinates. Its own array for the same reason
- * candles have one: `bars` carries pattern fills, data labels and the brush
- * mini-map, none of which mean anything for a box.
- */
-export type ChartBox = {
-  /** Box rect left edge and width. */
-  x: number
-  w: number
-  /** Whisker line and the caps, centred on the slot. */
-  xCenter: number
-  yMin: number
-  yQ1: number
-  yMedian: number
-  yQ3: number
-  yMax: number
-  /** Box rect, pre-ordered so the renderer does no min/max of its own. */
-  boxY: number
-  boxH: number
-  /** Points beyond the whiskers, already positioned. */
-  outliers: Array<{ y: number; value: number }>
-  color: string
-  label: string
-  series: string
-  min: number
-  q1: number
-  median: number
-  q3: number
-  max: number
-}
-
-/** One positioned error bar: a vertical span with caps, centred on its mark. */
-export type ChartErrorBar = {
-  xCenter: number
-  yLo: number
-  yHi: number
-  /** Cap half-width, so the renderer draws the same T at both ends. */
-  cap: number
-  color: string
-  label: string
-  series: string
-  lo: number
-  hi: number
-}
-
-/**
- * Five-number summary of a raw sample, with the 1.5 IQR whisker rule.
- *
- * Whiskers stop at the last observation INSIDE the fence rather than at the
- * fence itself, which is what makes them read as real data; anything past them
- * comes back in `outliers`. Quartiles use linear interpolation between the two
- * neighbouring order statistics.
- *
- * Returns `null` for an empty sample, so a category with no observations is a
- * gap rather than a box drawn at zero.
- */
-export function boxStats(sample: ReadonlyArray<number>, whisker = 1.5): BoxStats | null {
-  const v = sample.filter((n) => Number.isFinite(n)).slice().sort((a, b) => a - b)
-  if (!v.length) return null
-  const q = (p: number) => {
-    const pos = (v.length - 1) * p
-    const lo = Math.floor(pos)
-    const hi = Math.ceil(pos)
-    return lo === hi ? v[lo]! : v[lo]! + (v[hi]! - v[lo]!) * (pos - lo)
-  }
-  const q1 = q(0.25)
-  const median = q(0.5)
-  const q3 = q(0.75)
-  const fenceLo = q1 - whisker * (q3 - q1)
-  const fenceHi = q3 + whisker * (q3 - q1)
-  const inside = v.filter((n) => n >= fenceLo && n <= fenceHi)
-  const outliers = v.filter((n) => n < fenceLo || n > fenceHi)
-  return {
-    // `inside` can only be empty if every point is an outlier, which the fence
-    // rule makes impossible (q1 and q3 are always within it) - but a degenerate
-    // sample should still produce a box rather than `undefined` coordinates.
-    min: inside.length ? inside[0]! : v[0]!,
-    q1,
-    median,
-    q3,
-    max: inside.length ? inside[inside.length - 1]! : v[v.length - 1]!,
-    ...(outliers.length ? { outliers } : {}),
-  }
-}
-
-/**
- * Category-axis labels, thinned so they do not overlap.
- *
- * A category axis used to emit one tick per category however many there were.
- * At 5000 categories that is 5000 `<text>` nodes stacked into an unreadable
- * grey band - the labels were the single biggest thing the renderer had to put
- * in the DOM, and none of them could be read. The time and ordinal-time axes
- * already thinned themselves (`dateTicks` / `ordinalDateTicks`); this brings
- * the plain category axis in line.
- *
- * The first category always gets a label, so a thinned axis still starts where
- * the data does.
- */
-function thinCategoryTicks(
-  categories: string[],
-  xCenter: (i: number) => number,
-  slot: number,
-  rotated: boolean,
-): ChartCategoryTick[] {
-  // Rotated labels run diagonally and pack far tighter than upright ones. 18px
-  // is deliberately just under the spacing a 40-category chart at 800px already
-  // had, so charts that read fine before are untouched and only genuinely
-  // overlapping axes get thinned.
-  const minPx = rotated ? 18 : 60
-  const step = Math.max(1, Math.ceil(minPx / Math.max(slot, 0.001)))
-  const out: ChartCategoryTick[] = []
-  for (let i = 0; i < categories.length; i += step) out.push({ label: categories[i]!, x: xCenter(i) })
-  return out
-}
-
-/** Normalize one `errors` entry to an absolute low/high pair around `value`. */
-function errorSpan(
-  e: number | { lo: number; hi: number } | null | undefined,
-  value: number,
-): { lo: number; hi: number } | null {
-  if (e == null) return null
-  if (typeof e === 'number') {
-    if (!Number.isFinite(e)) return null
-    const m = Math.abs(e)
-    return { lo: value - m, hi: value + m }
-  }
-  if (!Number.isFinite(e.lo) || !Number.isFinite(e.hi)) return null
-  return { lo: Math.min(e.lo, e.hi), hi: Math.max(e.lo, e.hi) }
-}
-
-/** A computed bar rectangle in SVG coordinates. Output of {@link buildChart}, not an input. */
-export type ChartBar = {
-  x: number
-  y: number
-  w: number
-  h: number
-  color: string
-  /** Category (x label) this bar belongs to - for tooltips + labels. */
-  label: string
-  /** Series label this bar belongs to. */
-  series: string
-  value: number
-}
-/** One computed point on a line, with whether the series has a value there. */
-export type ChartLinePoint = {
-  x: number
-  y: number
-  label: string
-  value: number
-  /** False for null / NaN values - the line breaks (gap), no dot is drawn. */
-  defined: boolean
-}
-/** A computed line series: its points and the path drawn through them. */
-export type ChartLine = {
-  path: string
-  areaPath: string
-  color: string
-  label: string
-  points: ChartLinePoint[]
-  /** Confidence-band path (between upperValues + lowerValues) for this
-   *  series, when both arrays are supplied. Empty otherwise. */
-  bandPath?: string
-}
-/** A computed pie slice, as an SVG arc plus its label placement. */
-export type ChartPieSlice = {
-  path: string
-  color: string
-  label: string
-  value: number
-  percent: number
-  /** Centroid - anchor point for a data label. */
-  cx: number
-  cy: number
-}
-/** A value-axis tick: the number, where it sits vertically, and its label. */
-export type ChartAxisTick = { value: number; y: number; label: string }
-/** A category-axis tick: the label and its horizontal position. */
-export type ChartCategoryTick = { label: string; x: number }
-/** One legend entry, paired with the series colour it stands for. */
-export type ChartLegendItem = { label: string; color: string }
-/** A computed reference line (target, average, threshold) at its plotted height. */
-export type ChartRefLineGeo = { y: number; label: string; color: string; dashed: boolean }
-/** A vertical reference line (horizontal bar charts) positioned by `x`. */
-export type ChartRefLineGeoV = { x: number; label: string; color: string; dashed: boolean }
-/** A computed scatter point in SVG coordinates. */
-export type ChartScatterDot = {
-  cx: number
-  cy: number
-  r: number
-  color: string
-  label: string
-  series: string
-  x: number
-  y: number
-}
+// This file is the public facade over the chart engine. The types live in
+// chart-types.ts, scales and formatting in chart-scale.ts, statistics in
+// chart-stats.ts, axis resolution in chart-axes.ts and each family's layout in
+// chart-cartesian / chart-polar / chart-flow / chart-grid / chart-hierarchy.
+// buildChart below is the single entry: it resolves the series once and
+// dispatches to the family. Everything a consumer imports from './chart' is
+// re-exported here so the split is invisible from outside.
+import type {
+  ChartResponsiveRule,
+  ChartStyle,
+  BoxStats,
+  ChartAxisConfig,
+  ChartGeometry,
+  ChartLegendItem,
+  ChartMarkerShape,
+  ChartReducer,
+  ChartSeries,
+  ChartSpec,
+  ChartType,
+  ChartValueFormat,
+  LayoutCtx,
+  ResolvedSeries,
+  ScatterPoint,
+  TreeNode,
+} from './chart-types'
+import { DEFAULT_PALETTE, niceScale } from './chart-scale'
+import { binValues, boxStats, bucketStart, reducerNeedsSamples, reduceValues, type ChartTimeBucket } from './chart-stats'
+import { chartFrame, kindOf, resolveAxes } from './chart-axes'
+import { pickCategories } from './chart-decimate'
+import { layoutBullet, layoutCartesian, layoutHorizontalBars, layoutScatter } from './chart-cartesian'
+import { layoutChord, layoutGauge, layoutPie, layoutRadar, layoutRadialBar, layoutRadialColumn, layoutSunburst } from './chart-polar'
+import { layoutFunnel, layoutSankey, layoutWaterfall } from './chart-flow'
+import { layoutCalendar, layoutHeatmap } from './chart-grid'
+import { layoutTreemap } from './chart-hierarchy'
+
+export type * from './chart-types'
+export {
+  DEFAULT_PALETTE,
+  formatChartValue,
+  niceLogScale,
+  niceScale,
+  ordinalDateTicks,
+  pickContrastText,
+  sampleGradient,
+} from './chart-scale'
+export { chartScales } from './chart-axes'
+export { decimateSpec, lttb, minMaxIndices, pickCategories, PER_CATEGORY_SERIES_KEYS, PER_CATEGORY_SPEC_KEYS } from './chart-decimate'
+export { buildLinePath, layoutDataLabels, markerPath, streamBaseline, type ChartDataLabel } from './chart-cartesian'
+export { arcPath } from './chart-polar'
+export { pivotResultToChartSpec, pivotChartType, pivotFilterColumn, bucketsToChartSpec, type PivotResultChartOptions, type PivotResultLike } from './chart-pivot'
+export { heikinAshi, resampleOhlc, rowsToOhlcSpec, guessOhlcColumns, splitPanelIndicators, ohlcDirectOptions, type OhlcColumns, type ChartPanelIndicator } from './chart-financial'
+import { rowsToOhlcSpec } from './chart-financial'
+export {
+  binValues,
+  boxStats,
+  bucketStart,
+  percentile,
+  reduceValues,
+  type ChartBins,
+  type ChartTimeBucket,
+  exponentialMovingAverage,
+  linearTrend,
+  linearFit,
+  polynomialFit,
+  exponentialFit,
+  logarithmicFit,
+  powerFit,
+  rSquared,
+  pearson,
+  type RegressionFit,
+  simpleMovingAverage,
+} from './chart-stats'
+export {
+  computeOverlay,
+  computeOverlayFit,
+  regressionFit,
+  overlayName,
+  bollingerBands,
+  rsi,
+  macd,
+  vwap,
+  atr,
+  stochastic,
+  wma,
+  obv,
+  indicatorPane,
+  type ChartIndicatorSpec,
+} from './chart-indicators'
 
 /**
- * Everything needed to render a chart: the plot rectangle plus every mark
- * already positioned in SVG coordinates. Produced by {@link buildChart} from a
- * {@link ChartSpec}, so a renderer does no maths of its own.
+ * The CSS custom properties `spec.style` sets on the chart's host, as one
+ * inline style string (empty when nothing is set). `background` becomes the
+ * chart's `--sg-bg` (exports read it as the page colour), `textColor` the
+ * text tokens, `gridColor` the border token, `fontSize` a scale every label
+ * multiplies (12px is 1), and `fontFamily` the host's font.
  */
-export type ChartGeometry = {
-  type: ChartType
-  width: number
-  height: number
-  plot: { x: number; y: number; w: number; h: number }
-  /**
-   * The value domain each axis was actually drawn against, and the slot width
-   * of the category axis. Plain data, deliberately: the geometry stays a
-   * serialisable value object, and `chartScales(geo)` turns this into the
-   * `xOf` / `yOf` functions a custom mark needs.
-   *
-   * Null on the types with no cartesian axes (pie, gauge, treemap, sankey,
-   * calendar, radar, funnel), which is also how a caller can tell whether
-   * drawing into plot coordinates means anything.
-   */
-  axes: {
-    y: { min: number; max: number; log: boolean }
-    /** The right axis, when a series is plotted against one. */
-    y2: { min: number; max: number; log: boolean } | null
-    /** Horizontal room per category, in px. */
-    slot: number
-    /** Number of categories the axis was laid out for. */
-    count: number
-  } | null
-  bars: ChartBar[]
-  /** Candlestick / OHLC bars. Empty for every other chart type. */
-  candles: ChartCandle[]
-  /** Box plots. Empty for every other chart type. */
-  boxes: ChartBox[]
-  /** Error bars, from any series carrying `errors`. Empty when none do - they
-   *  annotate whatever mark the series already draws. */
-  errorBars: ChartErrorBar[]
-  lines: ChartLine[]
-  slices: ChartPieSlice[]
-  yTicks: ChartAxisTick[]
-  /** Right-axis ticks (combo / dual-axis); empty when there's no right axis. */
-  y2Ticks: ChartAxisTick[]
-  hasRightAxis: boolean
-  xTicks: ChartCategoryTick[]
-  /** Grouped category axis parent tier: label + span extent (pixels). Empty
-   *  unless `spec.categoryGroups` is set on a vertical category chart. */
-  categoryGroupTicks: Array<{ label: string; xCenter: number; x0: number; x1: number }>
-  /** True when x labels are long/many and should be rotated. */
-  xLabelRotated: boolean
-  legend: ChartLegendItem[]
-  /** Donut centre (pie + innerRadius), for a centre total label. */
-  donut: { cx: number; cy: number; r: number; total: number } | null
-  /** Horizontal reference / target lines. */
-  referenceLines: ChartRefLineGeo[]
-  /** Scatter / bubble points (type === 'scatter'). */
-  scatterPoints: ChartScatterDot[]
-  /** Bar orientation. `'horizontal'` uses `valueTicks` / `catTicks` below. */
-  orientation: 'vertical' | 'horizontal'
-  /** Horizontal bars: value-axis ticks along the bottom (label + x). */
-  valueTicks: ChartCategoryTick[]
-  /** Horizontal bars: category labels down the left (label + y; value = index). */
-  catTicks: ChartAxisTick[]
-  /** Horizontal bars: vertical reference / target lines (positioned by x). */
-  referenceLinesV: ChartRefLineGeoV[]
-  /** Trend / moving-average overlay lines (parallel to `lines`). Drawn
-   *  dashed on top of their source series. */
-  overlays: ChartLine[]
-  /** Pinned annotation labels with pre-resolved screen coordinates. */
-  annotations: Array<{ x: number; y: number; label: string; color: string; placement: 'top' | 'bottom' | 'left' | 'right' }>
-  /** Heatmap cells (type === 'heatmap'). */
-  heatmapCells: ChartHeatmapCell[]
-  /** Heatmap row labels with pre-resolved y positions (left gutter). */
-  heatmapRowTicks: ChartAxisTick[]
-  /** Heatmap column labels (bottom of plot). */
-  heatmapColTicks: ChartCategoryTick[]
-  /** Heatmap color-scale legend: ordered stops with value + color. */
-  heatmapLegend: Array<{ value: number; color: string; label: string }>
-  /** Funnel segments (type === 'funnel'). */
-  funnelSegments: ChartFunnelSegment[]
-  /** Radar concentric grid rings (centred at `radarCenter`). */
-  radarRings: number[]
-  /** Radar axis labels + spoke endpoints. */
-  radarAxes: ChartRadarAxis[]
-  /** Radar series polygons. */
-  radarSeries: ChartRadarSeries[]
-  /** Centre of the radar / pie. Pre-computed so callers don't re-derive. */
-  radarCenter: { cx: number; cy: number; r: number } | null
-  /** Tree-map cells (type === 'treemap'). */
-  treemapCells: ChartTreemapCell[]
-  /** Calendar heatmap (type === 'calendar'). */
-  calendarCells: ChartCalendarCell[]
-  /** Calendar month labels along the top. */
-  calendarMonthTicks: ChartCategoryTick[]
-  /** Calendar legend stops (sequential ramp). */
-  calendarLegend: Array<{ value: number; color: string; label: string }>
-  /** Gauge layout (type === 'gauge'). Null when not a gauge. */
-  gauge: ChartGaugeLayout | null
-  /** Sankey nodes (type === 'sankey'). */
-  sankeyNodes: ChartSankeyNode[]
-  /** Sankey links (type === 'sankey'). */
-  sankeyLinks: ChartSankeyLink[]
-}
-
-/** Series colours used when a {@link ChartSeries} sets none, in order. */
-export const DEFAULT_PALETTE = [
-  '#2563eb',
-  '#16a34a',
-  '#f59e0b',
-  '#ef4444',
-  '#8b5cf6',
-  '#0ea5e9',
-  '#ec4899',
-  '#14b8a6',
-]
-
-function round(n: number): number {
-  return Math.round(n * 100) / 100
-}
-
-function niceNum(range: number, roundIt: boolean): number {
-  if (range <= 0) return 1
-  const exp = Math.floor(Math.log10(range))
-  const f = range / Math.pow(10, exp)
-  let nf: number
-  if (roundIt) nf = f < 1.5 ? 1 : f < 3 ? 2 : f < 7 ? 5 : 10
-  else nf = f <= 1 ? 1 : f <= 2 ? 2 : f <= 5 ? 5 : 10
-  return nf * Math.pow(10, exp)
-}
-
-/** An axis range rounded to human-friendly bounds and tick spacing. */
-export type NiceScale = { min: number; max: number; step: number; ticks: number[] }
-
-// ---- Color helpers for heatmap / pattern fills ----------------------
-
-/** Built-in sequential ramp (light cyan -> deep blue), perception-friendly. */
-const SEQUENTIAL_STOPS = ['#eff6ff', '#bfdbfe', '#60a5fa', '#2563eb', '#1e3a8a']
-/** Built-in diverging ramp (red -> neutral -> blue). Use for signed data. */
-const DIVERGING_STOPS  = ['#b91c1c', '#fca5a5', '#f1f5f9', '#93c5fd', '#1d4ed8']
-/** Dark-theme ramps. The low (sequential) / neutral (diverging) end sits just
- *  above the dark grid surface instead of near-white, so empty / low cells read
- *  as "cold" rather than as glaring white rectangles. */
-const SEQUENTIAL_STOPS_DARK = ['#1c2c4d', '#1d4ed8', '#3b82f6', '#60a5fa', '#bae6fd']
-const DIVERGING_STOPS_DARK  = ['#f87171', '#b91c1c', '#222b3d', '#1d4ed8', '#60a5fa']
-
-function resolveColorScale(
-  scale: 'sequential' | 'diverging' | string[] | undefined,
-  vMin: number,
-  vMax: number,
-  theme: 'light' | 'dark' = 'light',
-): string[] {
-  if (Array.isArray(scale) && scale.length >= 2) return scale
-  const dark = theme === 'dark'
-  if (scale === 'diverging' || (scale == null && vMin < 0 && vMax > 0)) {
-    return dark ? DIVERGING_STOPS_DARK : DIVERGING_STOPS
-  }
-  return dark ? SEQUENTIAL_STOPS_DARK : SEQUENTIAL_STOPS
-}
-
-/** Sample a hex color from an array of hex stops at fractional position t.
- *  Linearly interpolates between the two nearest stops in RGB space. */
-export function sampleGradient(stops: string[], t: number): string {
-  if (!stops.length) return '#888'
-  const clamped = Math.max(0, Math.min(1, t))
-  if (stops.length === 1) return stops[0]!
-  const pos = clamped * (stops.length - 1)
-  const i = Math.floor(pos)
-  const frac = pos - i
-  const a = hexToRgb(stops[i]!)
-  const b = hexToRgb(stops[Math.min(stops.length - 1, i + 1)]!)
-  if (!a || !b) return stops[i] ?? '#888'
-  const lerp = (x: number, y: number) => Math.round(x + (y - x) * frac)
-  const toHex = (n: number) => n.toString(16).padStart(2, '0')
-  return '#' + toHex(lerp(a.r, b.r)) + toHex(lerp(a.g, b.g)) + toHex(lerp(a.b, b.b))
-}
-
-function hexToRgb(hex: string): { r: number; g: number; b: number } | null {
-  const m = /^#?([0-9a-f]{6})$/i.exec(hex.trim())
-  if (!m) return null
-  const n = parseInt(m[1]!, 16)
-  return { r: (n >> 16) & 255, g: (n >> 8) & 255, b: n & 255 }
-}
-
-/** Pick a black or white text color that has the better contrast against
- *  the given background. Uses the WCAG relative-luminance heuristic. */
-export function pickContrastText(bgHex: string): string {
-  const rgb = hexToRgb(bgHex)
-  if (!rgb) return '#0f172a'
-  const lin = (c: number) => {
-    const s = c / 255
-    return s <= 0.03928 ? s / 12.92 : Math.pow((s + 0.055) / 1.055, 2.4)
-  }
-  const L = 0.2126 * lin(rgb.r) + 0.7152 * lin(rgb.g) + 0.0722 * lin(rgb.b)
-  return L > 0.5 ? '#0f172a' : '#ffffff'
-}
-
-/** Pick the largest power of 10 that fits at the bottom of [min,max], and
- *  the smallest that covers the top, then enumerate decade boundaries. Used
- *  by log-scale axes (yScale: 'log'). */
-export function niceLogScale(min: number, max: number): NiceScale {
-  // Only positive values are plottable on a log scale; callers should
-  // strip non-positive values before passing them in.
-  if (!Number.isFinite(min) || min <= 0) min = 1
-  if (!Number.isFinite(max) || max <= min) max = min * 10
-  const lo = Math.floor(Math.log10(min))
-  const hi = Math.ceil(Math.log10(max))
-  const ticks: number[] = []
-  for (let p = lo; p <= hi; p += 1) ticks.push(Math.pow(10, p))
-  return { min: Math.pow(10, lo), max: Math.pow(10, hi), step: 10, ticks }
-}
-
-/** Map a value to a fractional position [0..1] across the axis domain.
- *  Pass the appropriate fn into projection code so linear / log share the
- *  same plumbing. Returns null for non-positive values on log. */
-function project(value: number, min: number, max: number, isLog: boolean): number | null {
-  if (!Number.isFinite(value)) return null
-  if (isLog) {
-    if (value <= 0 || min <= 0) return null
-    return (Math.log10(value) - Math.log10(min)) / (Math.log10(max) - Math.log10(min))
-  }
-  return (value - min) / (max - min)
-}
-
-/** The scale functions for a laid-out cartesian chart. See {@link chartScales}. */
-export type ChartScales = {
-  /** Pixel x at the centre of category `i`. Fractional indices interpolate,
-   *  so `xOf(2.5)` is the midpoint between the third and fourth categories. */
-  xOf: (index: number) => number
-  /** Pixel y for a value on the left axis (or the right, when asked). Returns
-   *  NaN for a value the axis cannot express, e.g. zero on a log scale. */
-  yOf: (value: number, axis?: 'left' | 'right') => number
-  /** The inverse of `xOf`: which category a pixel x falls on. Clamped. */
-  xInvert: (px: number) => number
-  /** The inverse of `yOf`. */
-  yInvert: (px: number, axis?: 'left' | 'right') => number
+export function chartStyleVars(style: ChartStyle | undefined): string {
+  if (!style) return ''
+  const out: string[] = []
+  if (style.background) out.push(`--sg-chart-bg:${style.background}`, `--sg-bg:${style.background}`)
+  if (style.textColor) out.push(`--sg-fg:${style.textColor}`, `--sg-muted:${style.textColor}`)
+  if (style.gridColor) out.push(`--sg-border:${style.gridColor}`)
+  if (style.fontSize && Number.isFinite(style.fontSize) && style.fontSize > 0) out.push(`--sg-chart-font-scale:${Math.round((style.fontSize / 12) * 1000) / 1000}`)
+  if (style.fontFamily) out.push(`font-family:${style.fontFamily}`)
+  return out.join(';')
 }
 
 /**
- * Turn a laid-out chart's axes into functions, so a caller can draw its own
- * marks in the same coordinates the built-in ones use.
- *
- * This is the custom-series seam. Rather than a registry of mark types, the
- * chart hands over its geometry and its scales and lets the caller render
- * whatever SVG it likes into the plot - which is the Svelte-shaped answer, and
- * means a custom mark is ordinary markup rather than a plugin.
- *
- * Deriving the scale from `geo.axes` matters: the domain a chart drew against
- * is the NICE-ROUNDED one, stretched to include zero for bar charts and any
- * reference lines. Recomputing it from the data outside would land custom marks
- * a few pixels off the built-in ones, in a way that looks like a rendering bug.
- *
- * Returns `null` for a chart with no cartesian axes (pie, gauge, treemap,
- * sankey, calendar, radar, funnel), where plot coordinates mean nothing.
+ * The responsive rules that apply at a rendered size, in spec order. Pure:
+ * `SvChart` uses it for the legend field, {@link resolveResponsive} for the
+ * spec patches.
  */
-export function chartScales(geo: ChartGeometry): ChartScales | null {
-  const a = geo.axes
-  if (!a) return null
-  const { x: px, y: py, w: pw, h: ph } = geo.plot
-  const yFor = (dom: { min: number; max: number; log: boolean }) => (value: number) => {
-    const t = project(value, dom.min, dom.max, dom.log)
-    return t === null ? Number.NaN : py + ph - t * ph
-  }
-  const left = yFor(a.y)
-  const right = a.y2 ? yFor(a.y2) : left
-  const invFor = (dom: { min: number; max: number; log: boolean }) => (y: number) => {
-    const t = ph === 0 ? 0 : (py + ph - y) / ph
-    if (!dom.log) return dom.min + t * (dom.max - dom.min)
-    const lo = Math.log10(dom.min)
-    return 10 ** (lo + t * (Math.log10(dom.max) - lo))
-  }
-  return {
-    xOf: (i) => px + a.slot * i + a.slot / 2,
-    yOf: (value, axis) => (axis === 'right' ? right(value) : left(value)),
-    xInvert: (x) =>
-      Math.max(0, Math.min(a.count - 1, Math.floor((x - px) / (a.slot || 1)))),
-    yInvert: (y, axis) => (axis === 'right' && a.y2 ? invFor(a.y2)(y) : invFor(a.y)(y)),
-  }
-}
-
-// ---- Overlay math: trendline + moving averages -----------------------
-
-/** Build an SVG path from a list of (x,y) pairs, optionally smoothed via
- *  monotone cubic interpolation (preserves local extrema - no overshoots).
- *  Breaks the path at `defined === false` gaps. */
-export function buildLinePath(
-  pts: Array<{ x: number; y: number; defined: boolean }>,
-  smooth: boolean,
-): string {
-  if (!smooth) {
-    let path = ''
-    let pen = false
-    for (const p of pts) {
-      if (!p.defined) { pen = false; continue }
-      path += `${pen ? 'L' : 'M'}${p.x},${p.y} `
-      pen = true
-    }
-    return path.trim()
-  }
-  // Group defined-only runs; each run is smoothed independently.
-  const runs: Array<Array<{ x: number; y: number }>> = []
-  let cur: Array<{ x: number; y: number }> = []
-  for (const p of pts) {
-    if (p.defined) cur.push({ x: p.x, y: p.y })
-    else if (cur.length) { runs.push(cur); cur = [] }
-  }
-  if (cur.length) runs.push(cur)
-  return runs.map(monotoneCubicPath).filter(Boolean).join(' ')
-}
-
-/** Fritsch-Carlson monotone cubic interpolation -> cubic-Bezier path.
- *  Slope at each point chosen so the curve passes through every (xi, yi)
- *  AND stays monotonic between them; control points sit 1/3 of the way
- *  to the neighbours along that tangent. */
-function monotoneCubicPath(pts: Array<{ x: number; y: number }>): string {
-  const n = pts.length
-  if (n === 0) return ''
-  if (n === 1) return `M${pts[0]!.x},${pts[0]!.y}`
-  if (n === 2) return `M${pts[0]!.x},${pts[0]!.y} L${pts[1]!.x},${pts[1]!.y}`
-  // Secant slopes between adjacent points.
-  const dx: number[] = new Array(n - 1)
-  const m: number[] = new Array(n - 1)
-  for (let i = 0; i < n - 1; i += 1) {
-    const d = pts[i + 1]!.x - pts[i]!.x
-    dx[i] = d
-    m[i] = d === 0 ? 0 : (pts[i + 1]!.y - pts[i]!.y) / d
-  }
-  // Tangent at each point: average of neighbouring slopes, with sign
-  // checks that flatten the tangent when slopes change sign.
-  const tan: number[] = new Array(n)
-  tan[0] = m[0]!
-  tan[n - 1] = m[n - 2]!
-  for (let i = 1; i < n - 1; i += 1) {
-    if (m[i - 1]! * m[i]! <= 0) tan[i] = 0
-    else tan[i] = (m[i - 1]! + m[i]!) / 2
-  }
-  // Fritsch-Carlson correction: ensure |tan / m| <= 3 to stay monotonic.
-  for (let i = 0; i < n - 1; i += 1) {
-    if (m[i] === 0) { tan[i] = 0; tan[i + 1] = 0; continue }
-    const a = tan[i]! / m[i]!
-    const b = tan[i + 1]! / m[i]!
-    const h = Math.hypot(a, b)
-    if (h > 3) {
-      tan[i] = (3 / h) * a * m[i]!
-      tan[i + 1] = (3 / h) * b * m[i]!
-    }
-  }
-  // Build the Bezier path. Each segment: control points at 1/3 of dx.
-  let path = `M${pts[0]!.x},${pts[0]!.y}`
-  for (let i = 0; i < n - 1; i += 1) {
-    const h = dx[i]!
-    const c1x = pts[i]!.x + h / 3
-    const c1y = pts[i]!.y + (tan[i]! * h) / 3
-    const c2x = pts[i + 1]!.x - h / 3
-    const c2y = pts[i + 1]!.y - (tan[i + 1]! * h) / 3
-    path += ` C${c1x},${c1y} ${c2x},${c2y} ${pts[i + 1]!.x},${pts[i + 1]!.y}`
-  }
-  return path
-}
-
-/** Ordinary least-squares regression on (i, values[i]) pairs (i = x index).
- *  Returns the fitted value at each x index, or NaN where the source value
- *  was non-finite. */
-export function linearTrend(values: number[]): number[] {
-  let n = 0, sumX = 0, sumY = 0, sumXX = 0, sumXY = 0
-  for (let i = 0; i < values.length; i += 1) {
-    const y = values[i]!
-    if (!Number.isFinite(y)) continue
-    n += 1; sumX += i; sumY += y; sumXX += i * i; sumXY += i * y
-  }
-  if (n < 2) return values.map(() => NaN)
-  const denom = n * sumXX - sumX * sumX
-  if (denom === 0) return values.map(() => sumY / n)
-  const slope = (n * sumXY - sumX * sumY) / denom
-  const intercept = (sumY - slope * sumX) / n
-  return values.map((_, i) => slope * i + intercept)
-}
-
-/** Simple moving average over a window of `period` values. Window centres
- *  trail to the right (typical for time-series). NaN for points before the
- *  window is full. */
-export function simpleMovingAverage(values: number[], period: number): number[] {
-  if (period < 1) return values.slice()
-  const out: number[] = new Array(values.length).fill(NaN)
-  let sum = 0, count = 0
-  for (let i = 0; i < values.length; i += 1) {
-    const v = values[i]!
-    if (Number.isFinite(v)) { sum += v; count += 1 }
-    if (i >= period) {
-      const drop = values[i - period]!
-      if (Number.isFinite(drop)) { sum -= drop; count -= 1 }
-    }
-    if (i >= period - 1 && count > 0) out[i] = sum / count
-  }
-  return out
-}
-
-/** Exponential moving average. Smoothing factor alpha = 2 / (period + 1). */
-export function exponentialMovingAverage(values: number[], period: number): number[] {
-  const alpha = 2 / (Math.max(1, period) + 1)
-  const out: number[] = new Array(values.length).fill(NaN)
-  let prev: number | null = null
-  for (let i = 0; i < values.length; i += 1) {
-    const v = values[i]!
-    if (!Number.isFinite(v)) { out[i] = prev ?? NaN; continue }
-    prev = prev == null ? v : alpha * v + (1 - alpha) * prev
-    out[i] = prev
-  }
-  return out
-}
-
-/** Compute overlay values for a series spec like 'sma:7' / 'ema:14' / 'linear'. */
-export function computeOverlay(values: number[], spec: SeriesOverlay): number[] {
-  if (spec === 'linear') return linearTrend(values)
-  const m = /^(sma|ema):(\d+)$/.exec(spec)
-  if (!m) return values.map(() => NaN)
-  const period = Number(m[2])
-  return m[1] === 'ema' ? exponentialMovingAverage(values, period) : simpleMovingAverage(values, period)
-}
-
-/** Round a [min,max] domain out to nice tick boundaries. */
-export function niceScale(min: number, max: number, tickCount = 4): NiceScale {
-  if (!Number.isFinite(min) || !Number.isFinite(max)) {
-    min = 0
-    max = 1
-  }
-  if (min === max) {
-    if (min === 0) max = 1
-    else {
-      min = Math.min(0, min)
-      max = Math.max(0, max)
-    }
-    if (min === max) max = min + 1
-  }
-  const range = niceNum(max - min, false)
-  const step = niceNum(range / Math.max(1, tickCount), true)
-  const nMin = Math.floor(min / step) * step
-  const nMax = Math.ceil(max / step) * step
-  const ticks: number[] = []
-  for (let v = nMin; v <= nMax + step * 0.5; v += step) ticks.push(round(v))
-  return { min: nMin, max: nMax, step, ticks }
-}
-
-function fmtTick(n: number): string {
-  const abs = Math.abs(n)
-  if (abs >= 1_000_000) return `${(n / 1_000_000).toFixed(abs % 1_000_000 ? 1 : 0)}M`
-  if (abs >= 1_000) return `${(n / 1_000).toFixed(abs % 1_000 ? 1 : 0)}k`
-  return String(Math.round(n * 100) / 100)
-}
-
-/** Value-axis / tooltip / label number format. */
-export type ChartValueFormat = 'number' | 'currency' | 'percent' | 'compact'
-
-/** Locale-aware formatting options, a structural subset of `ChartSpec` so a
- *  caller inside the engine can pass the spec straight through. */
-export type ChartFormatLocale = { locale?: string | ReadonlyArray<string>; currency?: string }
-
-/**
- * Format a numeric value for display, honouring an optional `valueFormat`.
- *
- * Two modes, on purpose. With no `locale` and no `currency` this is the original
- * locale-free output: the compact `1.2k` / `1.2M` base, currency prefixed with
- * `$` (sign outside), percent multiplied by 100 and suffixed `%`. Set either one
- * and it switches to `Intl.NumberFormat`, so separators, the decimal mark and the
- * compact suffixes all follow the locale.
- *
- * Keeping the old path as the default is deliberate rather than lazy. `Intl`'s
- * compact notation is not the same string even for `en-US` (`1.2K`, capital),
- * so formatting everything through it would silently restyle every axis in every
- * existing chart. Opting in is the only version of this that is not a surprise.
- */
-export function formatChartValue(
-  n: number,
-  format?: ChartValueFormat,
-  opts?: ChartFormatLocale,
-): string {
-  if (!Number.isFinite(n)) return ''
-  const localized = opts && (opts.locale || opts.currency)
-  if (localized) {
-    // Compact notation because these are axis ticks and data labels, where a
-    // full-precision number is what makes an axis unreadable.
-    const style = format === 'currency' ? 'currency' : format === 'percent' ? 'percent' : 'decimal'
-    const o: Intl.NumberFormatOptions = { notation: 'compact', maximumFractionDigits: 1 }
-    if (style === 'currency') {
-      o.style = 'currency'
-      // `style: 'currency'` throws without a code, so fall back to the symbol
-      // this used to hard-code rather than refusing to draw the chart.
-      o.currency = opts!.currency || 'USD'
-    } else if (style === 'percent') {
-      o.style = 'percent'
-    }
-    return getNumberFormatter(opts!.locale, o).format(n)
-  }
-  if (format === 'currency') return `${n < 0 ? '-' : ''}$${fmtTick(Math.abs(n))}`
-  if (format === 'percent') {
-    const p = n * 100
-    return `${Math.round(p * 10) / 10}%`
-  }
-  return fmtTick(n)
+export function matchResponsiveRules(rules: ChartResponsiveRule[] | undefined, width: number, height: number): ChartResponsiveRule[] {
+  if (!rules?.length) return []
+  return rules.filter(
+    (r) =>
+      (r.maxWidth == null || width <= r.maxWidth) &&
+      (r.minWidth == null || width >= r.minWidth) &&
+      (r.maxHeight == null || height <= r.maxHeight),
+  )
 }
 
-const DAY = 86_400_000
-/** Nice date-tick timestamps across [min, max]. */
-function dateTicks(tMin: number, tMax: number): number[] {
-  const span = tMax - tMin
-  const step =
-    span <= 7 * DAY ? DAY : span <= 70 * DAY ? 7 * DAY : span <= 800 * DAY ? 30 * DAY : 365 * DAY
-  const ticks: number[] = []
-  for (let t = Math.ceil(tMin / step) * step; t <= tMax + 1; t += step) ticks.push(t)
-  if (!ticks.length) ticks.push(tMin, tMax)
-  return ticks
-}
 /**
- * Tick positions for an ordinal (evenly spaced) date axis, as INDICES into
- * `times`.
- *
- * A time axis can put a tick anywhere, because x is a function of the
- * timestamp. An ordinal axis cannot: x is a function of the index, so a tick
- * has to land on a point that exists. This picks the first point of each
- * calendar unit - day, week, month, year, whichever gets closest to `target`
- * ticks without going over - so labels sit on real sessions and a weekend or a
- * holiday never stretches the spacing.
+ * Apply `spec.responsive` for a rendered size: every matching rule's `spec`
+ * is merged over the input in order (later wins), the three axis objects one
+ * level deep. Returns the input itself when nothing matches, so callers can
+ * compare by identity. `width`, `height` and `responsive` in a rule are
+ * ignored; the size is the caller's.
  */
-export function ordinalDateTicks(times: number[], target = 6): number[] {
-  if (times.length <= 1) return times.length ? [0] : []
-  const keyOf: Record<string, (d: Date) => number | string> = {
-    day: (d) => `${d.getUTCFullYear()}-${d.getUTCMonth()}-${d.getUTCDate()}`,
-    week: (d) => Math.floor((Date.UTC(d.getUTCFullYear(), d.getUTCMonth(), d.getUTCDate()) / DAY + 4) / 7),
-    month: (d) => `${d.getUTCFullYear()}-${d.getUTCMonth()}`,
-    year: (d) => d.getUTCFullYear(),
-  }
-  let chosen: number[] | null = null
-  for (const unit of ['day', 'week', 'month', 'year'] as const) {
-    const at: number[] = []
-    let prev: number | string | null = null
-    for (let i = 0; i < times.length; i += 1) {
-      const t = times[i]!
-      if (!Number.isFinite(t)) continue
-      const k = keyOf[unit]!(new Date(t))
-      if (k !== prev) at.push(i)
-      prev = k
+export function resolveResponsive(spec: ChartSpec, width: number, height: number): ChartSpec {
+  const hits = matchResponsiveRules(spec.responsive, width, height)
+  if (!hits.length) return spec
+  let out: ChartSpec = spec
+  for (const rule of hits) {
+    if (!rule.spec) continue
+    const { width: _w, height: _h, responsive: _r, ...patch } = rule.spec
+    const merged: ChartSpec = { ...out, ...patch }
+    for (const k of ['xAxis', 'yAxis', 'y2Axis'] as const) {
+      if (patch[k]) merged[k] = { ...(out[k] ?? {}), ...patch[k] }
     }
-    chosen = at
-    if (at.length <= target * 2) break
-  }
-  let out = chosen ?? []
-  // Even the coarsest unit can be too dense (a decade of yearly points), and a
-  // single trading day yields one boundary. Thin, or fall back to plain strides.
-  if (out.length > target) {
-    const stride = Math.ceil(out.length / target)
-    out = out.filter((_, i) => i % stride === 0)
-  }
-  if (out.length < 2) {
-    const stride = Math.max(1, Math.ceil(times.length / target))
-    out = times.map((_, i) => i).filter((i) => i % stride === 0)
+    out = merged
   }
   return out
 }
 
-function fmtDate(t: number, span: number): string {
-  const d = new Date(t)
-  if (span <= 70 * DAY) return d.toLocaleDateString(undefined, { month: 'short', day: 'numeric' })
-  if (span <= 800 * DAY) return d.toLocaleDateString(undefined, { month: 'short', year: '2-digit' })
-  return String(d.getFullYear())
-}
-
-type ResolvedSeries = ChartSeries & {
-  color: string
-  kind: 'bar' | 'line' | 'area' | 'candle' | 'box'
-  axis: 'left' | 'right'
-}
-
-/**
- * Which mark a series draws.
- *
- * A series counts as a candle when it says so OR when it carries `ohlc` data,
- * so a spec typed `'candlestick'` can still hold a plain volume bar series
- * beside the prices. Boxes work the same way. Anything unrecognised falls back
- * to `'bar'`, which is what pie and scatter have always relied on.
- */
-function kindOf(s: ChartSeries, specType: ChartType): ResolvedSeries['kind'] {
-  const t = s.type ?? specType
-  if (t === 'candlestick' || t === 'ohlc' || s.ohlc) return 'candle'
-  if (t === 'boxplot' || s.boxes) return 'box'
-  if (t === 'line' || t === 'area') return t
-  return 'bar'
-}
-
-/** Data domain for one axis, honoring stacking of its bar/area series.
- *  When `isLog` is true, non-positive values are discarded (log undefined)
- *  and the domain is rounded to decade boundaries instead of nice steps. */
-function axisDomain(
-  list: ResolvedSeries[],
-  categories: string[],
-  stacked: boolean,
-  extra: number[] = [],
-  isLog = false,
-): NiceScale {
-  let dMin = Infinity
-  let dMax = -Infinity
-  const note = (v: number) => {
-    if (!Number.isFinite(v)) return
-    if (isLog && v <= 0) return
-    if (v < dMin) dMin = v
-    if (v > dMax) dMax = v
-  }
-  for (const v of extra) note(v)
-  const stackable = list.filter((s) => s.kind === 'bar' || s.kind === 'area')
-  const lines = list.filter((s) => s.kind === 'line')
-  if (stacked && stackable.length) {
-    for (let i = 0; i < categories.length; i += 1) {
-      let pos = 0
-      let neg = 0
-      for (const s of stackable) {
-        const v = s.values[i] ?? 0
-        if (v >= 0) pos += v
-        else neg += v
-      }
-      note(pos)
-      note(neg)
-    }
-  } else {
-    for (const s of stackable) for (const v of s.values) note(v)
-  }
-  for (const s of lines) for (const v of s.values) note(v)
-  // Candles: note the HIGH and the LOW, not `values` (the closes), or every
-  // wick clips at the body. Note also that candles are deliberately absent
-  // from `stackable`, so the zero-baseline rule below does not fire for them:
-  // a price series running 180 to 195 keeps a readable domain instead of being
-  // flattened against zero.
-  for (const s of list) {
-    if (s.kind !== 'candle') continue
-    for (const k of s.ohlc ?? []) {
-      if (!k) continue
-      note(k.h)
-      note(k.l)
-    }
-  }
-  // Boxes: the whisker ends and any outlier, for the same reason - `values`
-  // holds the medians, so a domain built from those alone would clip half of
-  // every box. Boxes are also absent from `stackable`, so a sample that never
-  // goes near zero keeps a readable domain.
-  for (const s of list) {
-    if (s.kind !== 'box') continue
-    for (const b of s.boxes ?? []) {
-      if (!b) continue
-      note(b.min)
-      note(b.max)
-      for (const o of b.outliers ?? []) note(o)
-    }
-  }
-  // Error bars extend past their own mark, so a whisker that leaves the plot is
-  // the same defect as a clipped candle wick.
-  for (const s of list) {
-    if (!s.errors) continue
-    s.errors.forEach((e, i) => {
-      const span = errorSpan(e, s.values[i] ?? 0)
-      if (!span) return
-      note(span.lo)
-      note(span.hi)
-    })
-  }
-  if (dMin === Infinity) {
-    dMin = isLog ? 1 : 0
-    dMax = isLog ? 10 : 1
-  }
-  // Bar / area charts read against a zero baseline, so always include 0
-  // - but only on linear axes (0 is invalid in log).
-  if (stackable.length && !isLog) {
-    dMin = Math.min(dMin, 0)
-    dMax = Math.max(dMax, 0)
-  }
-  return isLog ? niceLogScale(dMin, dMax) : niceScale(dMin, dMax)
-}
-
 /**
  * Lay out a {@link ChartSpec} into renderable {@link ChartGeometry} - scales,
  * ticks, and the position of every bar, line, slice and dot. Pure: no DOM, so
  * it runs during SSR and can be unit-tested directly.
  */
-export function buildChart(spec: ChartSpec, theme: 'light' | 'dark' = 'light'): ChartGeometry {
-  const width = spec.width ?? 520
-  const height = spec.height ?? 300
+export function buildChart(input: ChartSpec, theme: 'light' | 'dark' = 'light'): ChartGeometry {
+  const width = input.width ?? 520
+  const height = input.height ?? 300
+  // Size rules first, so every family sees the patched spec.
+  const spec = resolveResponsive(input, width, height)
+  // A pareto is a bar chart with a cumulative-share line on the right axis,
+  // sorted by value. Build that spec and lay it out as the combo it is.
+  if (spec.type === 'pareto') return buildChart(paretoSpec(spec), theme)
   const palette = spec.palette ?? DEFAULT_PALETTE
 
   const stacked = !!(spec.stacked || spec.stacked100)
   const series: ResolvedSeries[] = spec.series.map((s, i) => ({
     ...s,
+    // A null is a gap unless the series (or the spec) says it is a zero. Done
+    // here, once, so every family and every overlay sees the same numbers.
+    values: (s.nullAs ?? spec.nullAs) === 'zero' ? s.values.map((v) => (Number.isFinite(v) ? v : 0)) : s.values,
     color: s.color ?? palette[i % palette.length]!,
     kind: kindOf(s, spec.type),
     axis: s.axis ?? 'left',
   }))
+  const frame = chartFrame(spec, width, height)
+  const axes = resolveAxes(spec)
   const legend: ChartLegendItem[] = series.map((s) => ({ label: s.label, color: s.color }))
 
   const empty: ChartGeometry = {
@@ -1341,10 +188,21 @@ export function buildChart(spec: ChartSpec, theme: 'light' | 'dark' = 'light'):
     height,
     plot: { x: 0, y: 0, w: width, h: height },
     axes: null,
+    frame,
+    grid: { x: false, y: false },
+    referenceBands: [],
     bars: [],
     candles: [],
     boxes: [],
     errorBars: [],
+    stems: [],
+    arcs: [],
+    chordRibbons: [],
+    bullets: [],
+    drawings: [],
+    seriesLabels: [],
+    polarAxes: [],
+    polarRings: [],
     lines: [],
     slices: [],
     yTicks: [],
@@ -1353,6 +211,7 @@ export function buildChart(spec: ChartSpec, theme: 'light' | 'dark' = 'light'):
     xTicks: [],
     categoryGroupTicks: [],
     xLabelRotated: false,
+    xLabelAngle: 0,
     legend,
     donut: null,
     referenceLines: [],
@@ -1381,1437 +240,29 @@ export function buildChart(spec: ChartSpec, theme: 'light' | 'dark' = 'light'):
     sankeyLinks: [],
   }
 
-  // ---- Waterfall ----------------------------------------------------
-  // First series provides the values. Each non-total bar starts at the
-  // running cumulative sum; total bars (waterfallTotals[i]) reset and
-  // span from 0 to that sum. Color is derived from sign + total flag, with
-  // optional palette overrides via spec.waterfallColors.
-  if (spec.type === 'waterfall') {
-    const src = series[0]
-    if (!src) return { ...empty }
-    const colors = spec.waterfallColors ?? {}
-    const positive = colors.positive ?? '#16a34a'
-    const negative = colors.negative ?? '#ef4444'
-    const total    = colors.total    ?? '#475569'
-
-    const maxLabel = spec.categories.reduce((m, c) => Math.max(m, c.length), 0)
-    const xLabelRotated = spec.categories.length > 8 || maxLabel > 9
-    const padL = 48 + (spec.yAxisTitle ? 16 : 0)
-    const padR = 12
-    const padT = 10
-    const padB = (xLabelRotated ? 54 : 28) + (spec.xAxisTitle ? 16 : 0)
-    const plotW = Math.max(1, width - padL - padR)
-    const plotH = Math.max(1, height - padT - padB)
-    const plot = { x: padL, y: padT, w: plotW, h: plotH }
-
-    // Compute the running cumulative + per-bar (from, to) pairs.
-    const totals = spec.waterfallTotals ?? []
-    const pairs: Array<{ from: number; to: number; value: number; isTotal: boolean }> = []
-    let cum = 0
-    spec.categories.forEach((_, i) => {
-      const v = src.values[i] ?? 0
-      const isTotal = !!totals[i]
-      if (isTotal) {
-        pairs.push({ from: 0, to: cum, value: cum, isTotal: true })
-      } else {
-        pairs.push({ from: cum, to: cum + v, value: v, isTotal: false })
-        cum += v
-      }
-    })
-    // Y-axis domain spans every visited level (including 0).
-    let dMin = 0, dMax = 0
-    for (const p of pairs) {
-      if (p.from < dMin) dMin = p.from
-      if (p.to   < dMin) dMin = p.to
-      if (p.from > dMax) dMax = p.from
-      if (p.to   > dMax) dMax = p.to
-    }
-    const dom = niceScale(dMin, dMax)
-    const yOfW = (v: number) => round(padT + plotH - ((v - dom.min) / (dom.max - dom.min || 1)) * plotH)
-
-    const slotW = plotW / Math.max(1, spec.categories.length)
-    const barPad = slotW * 0.2
-    const barW = Math.max(1, slotW - barPad)
-    const bars: ChartBar[] = pairs.map((p, i) => {
-      const yTop = yOfW(Math.max(p.from, p.to))
-      const yBot = yOfW(Math.min(p.from, p.to))
-      const x = padL + slotW * i + barPad / 2
-      const color = p.isTotal ? total : p.value >= 0 ? positive : negative
-      return {
-        x: round(x), y: yTop, w: round(barW), h: Math.max(1, yBot - yTop),
-        color, label: spec.categories[i] ?? String(i), series: src.label, value: p.value,
-      }
-    })
-    // Thin connector lines between bar tops -> running total reads cleanly.
-    const connectors: ChartLine[] = [{
-      path: pairs
-        .map((p, i) => {
-          const x0 = padL + slotW * i + barPad / 2 + barW
-          const y  = yOfW(p.to)
-          const x1 = padL + slotW * (i + 1) + barPad / 2
-          // Skip the final connector beyond the last bar.
-          return i < pairs.length - 1 ? `M${x0},${y} L${x1},${y}` : ''
-        })
-        .filter(Boolean)
-        .join(' '),
-      areaPath: '',
-      color: 'var(--sg-muted, #94a3b8)',
-      label: '',
-      points: [],
-    }]
-    const xTicks: ChartCategoryTick[] = spec.categories.map((label, i) => ({
-      label,
-      x: round(padL + slotW * i + slotW / 2),
-    }))
-    const yTicks: ChartAxisTick[] = dom.ticks.map((value) => ({
-      value, y: yOfW(value), label: formatChartValue(value, spec.valueFormat, spec),
-    }))
-    return {
-      ...empty,
-      plot,
-      bars,
-      lines: connectors,
-      yTicks,
-      xTicks,
-      xLabelRotated,
-    }
-  }
-
-  // ---- Funnel -------------------------------------------------------
-  // One series of strictly-decreasing values gets rendered as a stack
-  // of horizontal trapezoids: each level's width is proportional to its
-  // value relative to the largest, slope automatically links level N+1
-  // narrower than level N. Labels show value, conversion vs. top, and
-  // step drop-off.
-  if (spec.type === 'funnel') {
-    const src = series[0]
-    if (!src || !src.values.length) return { ...empty }
-    const padL = 20, padR = 20, padT = 16, padB = 16
-    const plotW = Math.max(1, width - padL - padR)
-    const plotH = Math.max(1, height - padT - padB)
-    const plot = { x: padL, y: padT, w: plotW, h: plotH }
-    const n = src.values.length
-    const stepH = plotH / n
-    const valMax = Math.max(...src.values.map((v) => (Number.isFinite(v) ? v : 0)))
-    const top = src.values[0] ?? 0
-    const widthAt = (v: number) => (valMax > 0 ? (v / valMax) * plotW : 0)
-    const cx = padL + plotW / 2
-    const palette = spec.palette ?? DEFAULT_PALETTE
-    const segments: ChartFunnelSegment[] = src.values.map((v, i) => {
-      const next = src.values[i + 1] ?? v * 0.8   // taper to a point on the last level
-      const w0 = widthAt(v)
-      const w1 = widthAt(next)
-      const y0 = padT + stepH * i
-      const y1 = y0 + stepH
-      const path = `M${cx - w0 / 2},${y0} L${cx + w0 / 2},${y0} L${cx + w1 / 2},${y1} L${cx - w1 / 2},${y1} Z`
-      const color = src.color ?? palette[i % palette.length]!
-      return {
-        path, color,
-        label: spec.categories[i] ?? src.label,
-        value: v,
-        conversion: top > 0 ? v / top : 0,
-        dropoff: i === 0 ? 0 : (src.values[i - 1] ?? v) > 0 ? 1 - v / (src.values[i - 1] ?? v) : 0,
-        cx,
-        cy: (y0 + y1) / 2,
-        textColor: pickContrastText(color),
-      }
-    })
-    return {
-      ...empty,
-      plot,
-      funnelSegments: segments,
-    }
-  }
-
-  // ---- Radar --------------------------------------------------------
-  // Polar coordinates: each `category` is a spoke (axis); each `series`
-  // contributes a polygon connecting its values across the spokes. All
-  // series share the same scale (max across every value). Concentric
-  // ring count derived from data, capped at 5 for legibility.
-  if (spec.type === 'radar') {
-    if (!series.length || !spec.categories.length) return { ...empty }
-    const padL = 30, padR = 30, padT = 24, padB = 24
-    const plotW = Math.max(1, width - padL - padR)
-    const plotH = Math.max(1, height - padT - padB)
-    const plot = { x: padL, y: padT, w: plotW, h: plotH }
-    const cx = padL + plotW / 2
-    const cy = padT + plotH / 2
-    const r = Math.max(20, Math.min(plotW, plotH) / 2 - 20)
-    const axes = spec.categories
-    const k = axes.length
-    let vMax = 0
-    for (const s of series) for (const v of s.values) {
-      if (Number.isFinite(v) && v > vMax) vMax = v
-    }
-    if (vMax === 0) vMax = 1
-    const ringCount = 5
-    const ringValues = Array.from({ length: ringCount }, (_, i) => ((i + 1) / ringCount) * vMax)
-    /** Convert (axis index, value) to (x, y). Angles start at 12 o'clock,
-     *  proceed clockwise so axes lay out left-to-right when k <= 4. */
-    const angleAt = (i: number) => -Math.PI / 2 + (i / k) * Math.PI * 2
-    const pointAt = (i: number, v: number) => {
-      const t = v / vMax
-      const a = angleAt(i)
-      return { x: round(cx + r * t * Math.cos(a)), y: round(cy + r * t * Math.sin(a)) }
-    }
-    const radarAxes: ChartRadarAxis[] = axes.map((label, i) => {
-      const p = pointAt(i, vMax)
-      return { label, x: p.x, y: p.y }
-    })
-    const radarSeriesGeo: ChartRadarSeries[] = series.map((s, si) => {
-      const pts = s.values.map((v, i) => {
-        const safe = Number.isFinite(v) ? v : 0
-        const p = pointAt(i, safe)
-        return { x: p.x, y: p.y, value: v, axis: axes[i] ?? '' }
-      })
-      const path = pts.length
-        ? pts.map((p, i) => `${i === 0 ? 'M' : 'L'}${p.x},${p.y}`).join(' ') + ' Z'
-        : ''
-      const palette = spec.palette ?? DEFAULT_PALETTE
-      return { label: s.label, color: s.color ?? palette[si % palette.length]!, path, points: pts }
-    })
-    return {
-      ...empty,
-      plot,
-      radarRings: ringValues,
-      radarAxes,
-      radarSeries: radarSeriesGeo,
-      radarCenter: { cx, cy, r },
-    }
-  }
-
-  // ---- Calendar heatmap --------------------------------------------
-  // GitHub-style year-of-days view: 7 rows (Sun..Sat) x N weeks. Each
-  // cell is a small square shaded by `calendarValues[i].value` via the
-  // sequential color scale. Days with no value render blank (border only)
-  // so missing data is visually obvious.
-  if (spec.type === 'calendar') {
-    const values = spec.calendarValues ?? []
-    if (!values.length && !spec.calendarStart) return { ...empty }
-    // Build a value lookup + figure out the date range.
-    const valueByDate = new Map<string, number>()
-    let vMin = Infinity, vMax = -Infinity
-    for (const v of values) {
-      valueByDate.set(v.date, v.value)
-      if (Number.isFinite(v.value)) {
-        if (v.value < vMin) vMin = v.value
-        if (v.value > vMax) vMax = v.value
-      }
-    }
-    if (vMin === Infinity) { vMin = 0; vMax = 1 }
-    if (vMin === vMax) vMax = vMin + 1
-    const stops = resolveColorScale(spec.colorScale, vMin, vMax, theme)
-    const colorAt = (v: number) => sampleGradient(stops, (v - vMin) / (vMax - vMin))
-    // Determine date range. If calendarStart/End set, use them, otherwise
-    // span the data + round to whole weeks (Sun..Sat).
-    const sorted = values.map((v) => v.date).sort()
-    const startStr = spec.calendarStart ?? sorted[0] ?? '2026-01-01'
-    const endStr   = spec.calendarEnd   ?? sorted[sorted.length - 1] ?? startStr
-    const start = new Date(startStr + 'T00:00:00Z')
-    const end   = new Date(endStr + 'T00:00:00Z')
-    // Roll start back to its Sunday, end forward to its Saturday.
-    start.setUTCDate(start.getUTCDate() - start.getUTCDay())
-    end.setUTCDate(end.getUTCDate() + (6 - end.getUTCDay()))
-    const totalDays = Math.round((end.getTime() - start.getTime()) / 86_400_000) + 1
-    const weeks = Math.ceil(totalDays / 7)
-    const padL = 36, padR = 80, padT = 26, padB = 16
-    const plotW = Math.max(1, width - padL - padR)
-    const plotH = Math.max(1, height - padT - padB)
-    // Cell size: fit weeks across width, 7 rows down height.
-    const cellW = Math.floor(plotW / weeks)
-    const cellH = Math.floor(plotH / 7)
-    const cellSize = Math.max(6, Math.min(cellW, cellH))
-    const plot = { x: padL, y: padT, w: cellSize * weeks, h: cellSize * 7 }
-    const cells: ChartCalendarCell[] = []
-    let lastMonth = -1
-    const monthTicks: ChartCategoryTick[] = []
-    for (let i = 0; i < totalDays; i += 1) {
-      const day = new Date(start.getTime() + i * 86_400_000)
-      const col = Math.floor(i / 7)
-      const row = i % 7
-      const date = day.toISOString().slice(0, 10)
-      const has = valueByDate.has(date)
-      const v = valueByDate.get(date) ?? 0
-      cells.push({
-        x: padL + col * cellSize,
-        y: padT + row * cellSize,
-        size: cellSize,
-        date, value: v,
-        defined: has,
-        color: has ? colorAt(v) : 'transparent',
-      })
-      if (day.getUTCDate() === 1 && day.getUTCMonth() !== lastMonth) {
-        lastMonth = day.getUTCMonth()
-        monthTicks.push({
-          label: day.toLocaleDateString(undefined, { month: 'short' }),
-          x: padL + col * cellSize,
-        })
-      }
-    }
-    const legend = Array.from({ length: 5 }, (_, i) => {
-      const t = i / 4
-      const value = vMin + (vMax - vMin) * t
-      return { value, color: colorAt(value), label: formatChartValue(value, spec.valueFormat, spec) }
-    })
-    return {
-      ...empty,
-      plot,
-      calendarCells: cells,
-      calendarMonthTicks: monthTicks,
-      calendarLegend: legend,
-    }
-  }
-
-  // ---- Gauge --------------------------------------------------------
-  // Semicircle dial: track arc + value arc + optional colored range bands
-  // + optional target tick. Reads spec.gaugeValue / gaugeMin / gaugeMax.
-  if (spec.type === 'gauge') {
-    const min = spec.gaugeMin ?? 0
-    const max = spec.gaugeMax ?? 100
-    const value = Math.max(min, Math.min(max, spec.gaugeValue ?? 0))
-    const target = spec.gaugeTarget
-    const cx = width / 2
-    const cy = height * 0.78
-    const r = Math.min(width * 0.42, height * 0.65)
-    // Start angle 180deg, end 360deg (drawn clockwise from 9 o'clock to 3).
-    const A0 = Math.PI
-    const A1 = 2 * Math.PI
-    const angleAt = (v: number) => A0 + ((v - min) / (max - min || 1)) * (A1 - A0)
-    const arc = (a0: number, a1: number, radius: number): string => {
-      const x1 = cx + radius * Math.cos(a0)
-      const y1 = cy + radius * Math.sin(a0)
-      const x2 = cx + radius * Math.cos(a1)
-      const y2 = cy + radius * Math.sin(a1)
-      const large = a1 - a0 > Math.PI ? 1 : 0
-      return `M${x1},${y1} A${radius},${radius} 0 ${large} 1 ${x2},${y2}`
-    }
-    const trackPath = arc(A0, A1, r)
-    const valuePath = arc(A0, angleAt(value), r)
-    // Bands sit on their own inner ring, well clear of the value arc's 16px
-    // stroke at `r`. They are context, not the reading: a band covering most
-    // of the scale (an error-rate dial where anything above 0.45 is red) used
-    // to out-shout the value arc completely, so the dial looked pegged at
-    // maximum when the actual value was 9 percent.
-    const rangePaths = (spec.gaugeRanges ?? []).map((band) => ({
-      path: arc(angleAt(band.from), angleAt(band.to), r - 16),
-      color: band.color, from: band.from, to: band.to,
-    }))
-    let targetPx: ChartGaugeLayout['target'] = null
-    if (target != null && Number.isFinite(target)) {
-      const a = angleAt(Math.max(min, Math.min(max, target)))
-      const inner = r - 12
-      const outer = r + 4
-      targetPx = {
-        x1: cx + inner * Math.cos(a), y1: cy + inner * Math.sin(a),
-        x2: cx + outer * Math.cos(a), y2: cy + outer * Math.sin(a),
-      }
-    }
-    // Tick marks just outside the track: a major tick every 1/4 of the scale,
-    // with 4 minor ticks between each. Gives the dial a measured, instrument feel.
-    const ticks: ChartGaugeLayout['ticks'] = []
-    const TICK_MAJOR = 4, TICK_MINOR = 5, TICK_TOTAL = TICK_MAJOR * TICK_MINOR
-    for (let i = 0; i <= TICK_TOTAL; i++) {
-      const a = A0 + (i / TICK_TOTAL) * (A1 - A0)
-      const major = i % TICK_MINOR === 0
-      const inner = r + 9
-      const outer = r + (major ? 17 : 13)
-      ticks.push({
-        x1: cx + inner * Math.cos(a), y1: cy + inner * Math.sin(a),
-        x2: cx + outer * Math.cos(a), y2: cy + outer * Math.sin(a),
-        major,
-      })
-    }
-    // Pointer needle: a kite (long tip toward the value, short counterweight
-    // tail) pivoting on a center hub.
-    //
-    // The proportions matter more than they look, and the counterweight was the
-    // whole problem. A tail sticking out past the hub is a short, solid triangle;
-    // the pointer is a 130px taper that thins to nothing. The compact shape wins
-    // the eye, so on a near-full dial the needle read as an arrow pointing at the
-    // MINIMUM. Keeping the tail inside the hub radius removes the competing
-    // point without giving up the pivot, and the shoulders sit outside the hub so
-    // the needle actually has a visible base to taper from.
-    const aV = angleAt(value)
-    const tipR = r - 14, tailR = 5, baseR = 9
-    const aPerp = aV + Math.PI / 2
-    const pt = (rad: number, ang: number) => `${round(cx + rad * Math.cos(ang))},${round(cy + rad * Math.sin(ang))}`
-    const needlePath =
-      `M${pt(baseR, aPerp)} L${pt(tipR, aV)} L${pt(baseR, aPerp + Math.PI)} L${pt(tailR, aV + Math.PI)} Z`
-    // Color the value arc by the band the value currently sits in.
-    // First match wins, and bands are half-open [from, to). Bands normally
-    // share endpoints - green 0..0.3, amber 0.3..0.45, red 0.45..5 - and with
-    // an inclusive `to` plus last-match-wins, a value sitting exactly ON a
-    // boundary took the colour of the band ABOVE it. An error rate of 0.45
-    // against a 0.45 amber ceiling read as red.
-    let valueColor: string | null = null
-    const bands = spec.gaugeRanges ?? []
-    for (const band of bands) {
-      if (value >= band.from && value < band.to) { valueColor = band.color; break }
-    }
-    // The very top of the scale belongs to the last band that reaches it,
-    // which the half-open test above would otherwise exclude.
-    if (valueColor == null) {
-      for (const band of bands) if (value >= band.from && value <= band.to) valueColor = band.color
-    }
-    return {
-      ...empty,
-      plot: { x: 0, y: 0, w: width, h: height },
-      gauge: {
-        cx, cy, r, trackPath, valuePath, rangePaths, target: targetPx,
-        ticks, needle: { path: needlePath, hubR: 6 }, valueColor,
-        minLabel: { x: cx - r, y: cy + 20 },
-        maxLabel: { x: cx + r, y: cy + 20 },
-        value, min, max, unit: spec.gaugeUnit ?? '',
-      },
-    }
-  }
-
-  // ---- Tree-map -----------------------------------------------------
-  // Squarified tree-map (Bruls et al. 2000): each level recursively
-  // partitions its rectangle in proportion to its children, picking the
-  // split orientation that keeps aspect ratios closest to 1.
-  if (spec.type === 'treemap') {
-    const root = spec.treemap
-    if (!root) return { ...empty }
-    const padL = 4, padR = 4, padT = 4, padB = 4
-    const plotW = Math.max(1, width - padL - padR)
-    const plotH = Math.max(1, height - padT - padB)
-    const plot = { x: padL, y: padT, w: plotW, h: plotH }
-    const palette = spec.palette ?? DEFAULT_PALETTE
-    const cells: ChartTreemapCell[] = []
-    function totalOf(n: TreeNode): number {
-      if (n.children?.length) return n.children.reduce((s, c) => s + totalOf(c), 0)
-      return Math.max(0, n.value ?? 0)
-    }
-    function squarify(items: TreeNode[], x: number, y: number, w: number, h: number, depth: number) {
-      if (!items.length || w <= 0 || h <= 0) return
-      const totals = items.map(totalOf)
-      const sum = totals.reduce((a, b) => a + b, 0)
-      if (sum <= 0) return
-      // Process largest-first so big items dominate the first row.
-      const ordered = items
-        .map((n, i) => ({ node: n, value: totals[i]! }))
-        .sort((a, b) => b.value - a.value)
-      let cx = x, cy = y, cw = w, ch = h, remaining = sum
-      let row: typeof ordered = []
-      const worstRatio = (vals: number[], shortSide: number, rowSum: number, scale: number): number => {
-        if (rowSum <= 0) return Infinity
-        const rowArea = rowSum * scale
-        const rowSide = rowArea / shortSide
-        let worst = 0
-        for (const v of vals) {
-          const cell = v * scale
-          const long = cell / rowSide
-          const r = Math.max(shortSide / long, long / shortSide)
-          if (r > worst) worst = r
-        }
-        return worst
-      }
-      function flushRow() {
-        if (!row.length) return
-        const rowSum = row.reduce((a, b) => a + b.value, 0)
-        const scale = (cw * ch) / remaining
-        const horizontal = cw >= ch
-        const shortSide = horizontal ? ch : cw
-        const rowSide = (rowSum * scale) / shortSide
-        let offset = 0
-        for (const it of row) {
-          const cellSize = (it.value * scale) / rowSide
-          const cx2 = horizontal ? cx : cx + offset
-          const cy2 = horizontal ? cy + offset : cy
-          const ww  = horizontal ? rowSide : cellSize
-          const hh  = horizontal ? cellSize : rowSide
-          const color = it.node.color ?? palette[(depth + cells.length) % palette.length]!
-          // Leaf: emit a cell. Branch: recurse into the rect minus a label gutter.
-          if (it.node.children?.length) {
-            cells.push({
-              x: round(cx2), y: round(cy2), w: round(ww), h: round(hh),
-              color, textColor: pickContrastText(color),
-              name: it.node.name, value: it.value, depth,
-            })
-            const labelH = Math.min(18, hh * 0.25)
-            squarify(it.node.children, cx2 + 1, cy2 + labelH, ww - 2, hh - labelH - 1, depth + 1)
-          } else {
-            cells.push({
-              x: round(cx2), y: round(cy2), w: round(ww), h: round(hh),
-              color, textColor: pickContrastText(color),
-              name: it.node.name, value: it.value, depth,
-            })
-          }
-          offset += cellSize
-        }
-        // Shrink the remaining strip.
-        if (horizontal) { cx += rowSide; cw -= rowSide } else { cy += rowSide; ch -= rowSide }
-        remaining -= rowSum
-        row = []
-      }
-      for (const it of ordered) {
-        const scale = (cw * ch) / remaining
-        const shortSide = Math.min(cw, ch)
-        const rowSum = row.reduce((a, b) => a + b.value, 0)
-        const currWorst = worstRatio(row.map((r) => r.value), shortSide, rowSum, scale)
-        const nextWorst = worstRatio([...row.map((r) => r.value), it.value], shortSide, rowSum + it.value, scale)
-        if (row.length && nextWorst > currWorst) {
-          flushRow()
-        }
-        row.push(it)
-      }
-      flushRow()
-    }
-    const seedItems = root.children ?? [root]
-    squarify(seedItems, padL, padT, plotW, plotH, 0)
-    return { ...empty, plot, treemapCells: cells }
-  }
-
-  // ---- Sankey -------------------------------------------------------
-  // Multi-column flow layout. Each node assigned to a column by longest
-  // path from any source. Within a column, nodes are stacked vertically;
-  // height proportional to max(totalIn, totalOut). Links render as
-  // bezier ribbons whose width is the link value (in pixels).
-  if (spec.type === 'sankey') {
-    const nodes = spec.sankeyNodes ?? []
-    const links = spec.sankeyLinks ?? []
-    if (!nodes.length || !links.length) return { ...empty }
-    const padL = 10, padR = 10, padT = 14, padB = 14
-    const plotW = Math.max(1, width - padL - padR)
-    const plotH = Math.max(1, height - padT - padB)
-    const plot = { x: padL, y: padT, w: plotW, h: plotH }
-    const palette = spec.palette ?? DEFAULT_PALETTE
-    const nodeById = new Map(nodes.map((n) => [n.id, n]))
-    // Column = longest path from any node with no incoming edges.
-    const targets = new Set(links.map((l) => l.target))
-    const sources = nodes.filter((n) => !targets.has(n.id))
-    const column = new Map<string, number>()
-    function visit(id: string, depth: number, seen: Set<string>) {
-      if (seen.has(id)) return
-      seen.add(id)
-      const cur = column.get(id) ?? 0
-      if (depth > cur || !column.has(id)) column.set(id, depth)
-      for (const l of links) if (l.source === id) visit(l.target, depth + 1, seen)
-      seen.delete(id)
-    }
-    for (const s of sources) visit(s.id, 0, new Set())
-    // Cover any nodes with no path from a source (orphan rings).
-    for (const n of nodes) if (!column.has(n.id)) column.set(n.id, 0)
-    const maxCol = Math.max(...column.values())
-    const cols = maxCol + 1
-    const nodeW = 14
-    const gapBetweenColumns = cols > 1 ? (plotW - nodeW * cols) / (cols - 1) : 0
-    // Totals per node.
-    const totalIn = new Map<string, number>()
-    const totalOut = new Map<string, number>()
-    for (const l of links) {
-      totalIn.set(l.target, (totalIn.get(l.target) ?? 0) + l.value)
-      totalOut.set(l.source, (totalOut.get(l.source) ?? 0) + l.value)
-    }
-    // Per-column groups + max total in that column.
-    const byCol: Map<number, string[]> = new Map()
-    for (const n of nodes) {
-      const c = column.get(n.id) ?? 0
-      const arr = byCol.get(c) ?? []
-      arr.push(n.id); byCol.set(c, arr)
-    }
-    // Per-column total height + node height scale.
-    let maxColTotal = 0
-    for (const ids of byCol.values()) {
-      const t = ids.reduce((s, id) => s + Math.max(totalIn.get(id) ?? 0, totalOut.get(id) ?? 0), 0)
-      if (t > maxColTotal) maxColTotal = t
-    }
-    if (maxColTotal === 0) return { ...empty, plot }
-    const nodeGapPx = 8
-    const heightScale = (plotH - nodeGapPx * 8) / maxColTotal  // leave gap room
-    const placed: ChartSankeyNode[] = []
-    for (const [c, ids] of byCol) {
-      const heights = ids.map((id) => Math.max(8, Math.max(totalIn.get(id) ?? 0, totalOut.get(id) ?? 0) * heightScale))
-      const totalH = heights.reduce((s, h) => s + h, 0) + nodeGapPx * (ids.length - 1)
-      let yCursor = padT + (plotH - totalH) / 2
-      const xCol = padL + c * (nodeW + gapBetweenColumns)
-      ids.forEach((id, idx) => {
-        const node = nodeById.get(id)!
-        const h = heights[idx]!
-        placed.push({
-          id,
-          label: node.label ?? id,
-          color: node.color ?? palette[(placed.length) % palette.length]!,
-          x: xCol, y: yCursor, w: nodeW, h,
-          column: c,
-          totalIn: totalIn.get(id) ?? 0,
-          totalOut: totalOut.get(id) ?? 0,
-        })
-        yCursor += h + nodeGapPx
-      })
-    }
-    const placedById = new Map(placed.map((n) => [n.id, n]))
-    // Per-node sub-cursor so multiple links from one node stack vertically.
-    const inCursor = new Map<string, number>()
-    const outCursor = new Map<string, number>()
-    const builtLinks: ChartSankeyLink[] = []
-    // Sort links so wider ribbons render first (so thin ribbons stack on top).
-    const sortedLinks = links.slice().sort((a, b) => b.value - a.value)
-    for (const link of sortedLinks) {
-      const a = placedById.get(link.source)
-      const b = placedById.get(link.target)
-      if (!a || !b) continue
-      const linkH = Math.max(1, link.value * heightScale)
-      const aY = a.y + (outCursor.get(a.id) ?? 0) + linkH / 2
-      const bY = b.y + (inCursor.get(b.id) ?? 0) + linkH / 2
-      outCursor.set(a.id, (outCursor.get(a.id) ?? 0) + linkH)
-      inCursor.set(b.id, (inCursor.get(b.id) ?? 0) + linkH)
-      const x0 = a.x + a.w
-      const x1 = b.x
-      const mid = (x0 + x1) / 2
-      const path = `M${x0},${aY} C${mid},${aY} ${mid},${bY} ${x1},${bY}`
-      builtLinks.push({
-        path, color: link.color ?? a.color, width: linkH,
-        source: link.source, target: link.target, value: link.value,
-      })
-    }
-    return { ...empty, plot, sankeyNodes: placed, sankeyLinks: builtLinks }
-  }
-
-  // ---- Heatmap ------------------------------------------------------
-  // Each series is one row, series.values are the cells across categories.
-  // Color comes from a sequential/diverging/custom palette mapped to the
-  // global value range. Cell text contrasts black/white against the cell.
-  if (spec.type === 'heatmap') {
-    if (!series.length || !spec.categories.length) return { ...empty, plot: { x: 0, y: 0, w: width, h: height } }
-    // Layout: left gutter for row labels, bottom for column labels.
-    const maxRowLabel = series.reduce((m, s) => Math.max(m, s.label.length), 0)
-    const padL = 12 + Math.min(180, Math.max(60, maxRowLabel * 7))
-    const padR = 64   // room for the right-side legend bar
-    const padT = 12
-    const padB = 32
-    const plotW = Math.max(1, width - padL - padR)
-    const plotH = Math.max(1, height - padT - padB)
-    const plot = { x: padL, y: padT, w: plotW, h: plotH }
-    const cellW = plotW / spec.categories.length
-    const cellH = plotH / series.length
-    // Resolve value range across the whole matrix.
-    let vMin = Infinity, vMax = -Infinity
-    for (const s of series) for (const v of s.values) {
-      if (!Number.isFinite(v)) continue
-      if (v < vMin) vMin = v
-      if (v > vMax) vMax = v
-    }
-    if (vMin === Infinity) { vMin = 0; vMax = 1 }
-    if (vMin === vMax) vMax = vMin + 1
-    // Pick the palette stops.
-    const stops = resolveColorScale(spec.colorScale, vMin, vMax, theme)
-    const colorAt = (v: number) => sampleGradient(stops, (v - vMin) / (vMax - vMin))
-    const heatmapCells: ChartHeatmapCell[] = []
-    series.forEach((s, ri) => {
-      s.values.forEach((v, ci) => {
-        if (!Number.isFinite(v)) return
-        const color = colorAt(v)
-        heatmapCells.push({
-          x: round(padL + cellW * ci),
-          y: round(padT + cellH * ri),
-          w: round(cellW),
-          h: round(cellH),
-          color,
-          textColor: pickContrastText(color),
-          value: v,
-          rowLabel: s.label,
-          colLabel: spec.categories[ci] ?? '',
-        })
-      })
-    })
-    const heatmapRowTicks: ChartAxisTick[] = series.map((s, i) => ({
-      value: i,
-      y: round(padT + cellH * i + cellH / 2),
-      label: s.label,
-    }))
-    const heatmapColTicks: ChartCategoryTick[] = spec.categories.map((label, i) => ({
-      label,
-      x: round(padL + cellW * i + cellW / 2),
-    }))
-    // Legend: sample 5 stops across the range.
-    const heatmapLegend = Array.from({ length: 5 }, (_, i) => {
-      const t = i / 4
-      const value = vMin + (vMax - vMin) * t
-      return { value, color: colorAt(value), label: formatChartValue(value, spec.valueFormat, spec) }
-    })
-    return {
-      ...empty,
-      plot,
-      heatmapCells,
-      heatmapRowTicks,
-      heatmapColTicks,
-      heatmapLegend,
-    }
-  }
-
-  if (spec.type === 'pie') {
-    const s = series[0]
-    if (!s) return empty
-    const total = s.values.reduce((a, b) => a + Math.max(0, b), 0) || 1
-    const cx = width / 2
-    const cy = height / 2
-    const r = Math.min(width, height) / 2 - 10
-    const innerFrac = Math.min(0.9, Math.max(0, spec.innerRadius ?? 0))
-    const ir = r * innerFrac
-    let angle = -Math.PI / 2
-    const slices: ChartPieSlice[] = s.values.map((v, i) => {
-      const frac = Math.max(0, v) / total
-      const a0 = angle
-      const a1 = angle + frac * Math.PI * 2
-      angle = a1
-      const large = a1 - a0 > Math.PI ? 1 : 0
-      const mid = (a0 + a1) / 2
-      const labelR = (r + ir) / 2 || r * 0.6
-      const ox0 = cx + r * Math.cos(a0)
-      const oy0 = cy + r * Math.sin(a0)
-      const ox1 = cx + r * Math.cos(a1)
-      const oy1 = cy + r * Math.sin(a1)
-      let path: string
-      if (frac >= 0.999) {
-        path = ir
-          ? `M${round(cx - r)},${round(cy)} A${r},${r} 0 1 1 ${round(cx + r)},${round(cy)} A${r},${r} 0 1 1 ${round(cx - r)},${round(cy)} Z` +
-            `M${round(cx - ir)},${round(cy)} A${ir},${ir} 0 1 0 ${round(cx + ir)},${round(cy)} A${ir},${ir} 0 1 0 ${round(cx - ir)},${round(cy)} Z`
-          : `M${round(cx - r)},${round(cy)} A${r},${r} 0 1 1 ${round(cx + r)},${round(cy)} A${r},${r} 0 1 1 ${round(cx - r)},${round(cy)} Z`
-      } else if (ir > 0) {
-        const ix0 = cx + ir * Math.cos(a0)
-        const iy0 = cy + ir * Math.sin(a0)
-        const ix1 = cx + ir * Math.cos(a1)
-        const iy1 = cy + ir * Math.sin(a1)
-        path =
-          `M${round(ox0)},${round(oy0)} A${r},${r} 0 ${large} 1 ${round(ox1)},${round(oy1)} ` +
-          `L${round(ix1)},${round(iy1)} A${ir},${ir} 0 ${large} 0 ${round(ix0)},${round(iy0)} Z`
-      } else {
-        path = `M${round(cx)},${round(cy)} L${round(ox0)},${round(oy0)} A${r},${r} 0 ${large} 1 ${round(ox1)},${round(oy1)} Z`
-      }
-      const catLabel = spec.categories[i] ?? String(i)
-      return {
-        path,
-        color: spec.categoryColors?.[catLabel] ?? palette[i % palette.length]!,
-        label: catLabel,
-        value: v,
-        percent: frac * 100,
-        cx: round(cx + labelR * Math.cos(mid)),
-        cy: round(cy + labelR * Math.sin(mid)),
-      }
-    })
-    return {
-      ...empty,
-      slices,
-      legend: spec.categories.map((label, i) => ({ label, color: spec.categoryColors?.[label] ?? palette[i % palette.length]! })),
-      donut: ir > 0 ? { cx: round(cx), cy: round(cy), r: round(ir), total: s.values.reduce((a, b) => a + Math.max(0, b), 0) } : null,
-    }
-  }
-
-  if (spec.type === 'scatter') {
-    const padL = 48 + (spec.yAxisTitle ? 16 : 0)
-    const padR = 12
-    const padT = 10
-    const padB = 28 + (spec.xAxisTitle ? 16 : 0)
-    const plotW = Math.max(1, width - padL - padR)
-    const plotH = Math.max(1, height - padT - padB)
-    const plot = { x: padL, y: padT, w: plotW, h: plotH }
-
-    let xMin = Infinity
-    let xMax = -Infinity
-    let yMin = Infinity
-    let yMax = -Infinity
-    let rMin = Infinity
-    let rMax = -Infinity
-    for (const s of series) {
-      for (const pt of s.points ?? []) {
-        if (Number.isFinite(pt.x)) { xMin = Math.min(xMin, pt.x); xMax = Math.max(xMax, pt.x) }
-        if (Number.isFinite(pt.y)) { yMin = Math.min(yMin, pt.y); yMax = Math.max(yMax, pt.y) }
-        if (pt.r != null && Number.isFinite(pt.r)) { rMin = Math.min(rMin, pt.r); rMax = Math.max(rMax, pt.r) }
-      }
-    }
-    if (xMin === Infinity) return { ...empty, plot }
-    const xDom = niceScale(xMin, xMax)
-    const yDom = niceScale(yMin, yMax)
-    const hasR = rMax > rMin
-    const xOf = (v: number) => round(padL + ((v - xDom.min) / (xDom.max - xDom.min || 1)) * plotW)
-    const yOf = (v: number) => round(padT + plotH - ((v - yDom.min) / (yDom.max - yDom.min || 1)) * plotH)
-    const rOf = (r?: number) =>
-      hasR && r != null && Number.isFinite(r)
-        ? round(4 + ((r - rMin) / (rMax - rMin || 1)) * 14)
-        : 5
-
-    const scatterPoints: ChartScatterDot[] = []
-    for (const s of series) {
-      for (const pt of s.points ?? []) {
-        if (!Number.isFinite(pt.x) || !Number.isFinite(pt.y)) continue
-        scatterPoints.push({
-          cx: xOf(pt.x),
-          cy: yOf(pt.y),
-          r: rOf(pt.r),
-          color: s.color,
-          label: pt.label ?? '',
-          series: s.label,
-          x: pt.x,
-          y: pt.y,
-        })
-      }
-    }
-    const referenceLines: ChartRefLineGeo[] = (spec.referenceLines ?? []).map((ref) => ({
-      y: yOf(ref.value),
-      label: ref.label ?? formatChartValue(ref.value, spec.valueFormat, spec),
-      color: ref.color ?? '#ef4444',
-      dashed: ref.dashed !== false,
-    }))
-    return {
-      ...empty,
-      plot,
-      scatterPoints,
-      referenceLines,
-      yTicks: yDom.ticks.map((value) => ({ value, y: yOf(value), label: formatChartValue(value, spec.valueFormat, spec) })),
-      xTicks: xDom.ticks.map((value) => ({ label: fmtTick(value), x: xOf(value) })),
-    }
-  }
+  const ctx: LayoutCtx = { spec, theme, width, height, palette, stacked, series, legend, empty, frame, axes }
+  if (spec.type === 'waterfall') return layoutWaterfall(ctx)
+  if (spec.type === 'funnel') return layoutFunnel(ctx)
+  if (spec.type === 'radar') return layoutRadar(ctx)
+  if (spec.type === 'calendar') return layoutCalendar(ctx)
+  if (spec.type === 'gauge') return layoutGauge(ctx)
+  if (spec.type === 'treemap') return layoutTreemap(ctx)
+  if (spec.type === 'sankey') return layoutSankey(ctx)
+  if (spec.type === 'heatmap') return layoutHeatmap(ctx)
+  if (spec.type === 'pie') return layoutPie(ctx)
+  if (spec.type === 'scatter') return layoutScatter(ctx)
+  if (spec.type === 'sunburst') return layoutSunburst(ctx)
+  if (spec.type === 'radial-bar') return layoutRadialBar(ctx)
+  if (spec.type === 'radial-column' || spec.type === 'nightingale') return layoutRadialColumn(ctx)
+  if (spec.type === 'chord') return layoutChord(ctx)
+  if (spec.type === 'bullet') return layoutBullet(ctx)
 
   // ---- Horizontal bars ----------------------------------------------------
   // Categories run down the left, bars grow rightward. Bars-only (no combo).
   const horizontal =
-    spec.orientation === 'horizontal' && series.length > 0 && series.every((s) => s.kind === 'bar')
-  if (horizontal) {
-    const maxLabel = spec.categories.reduce((m, c) => Math.max(m, c.length), 0)
-    const padL = Math.min(150, 18 + maxLabel * 6.4) + (spec.yAxisTitle ? 16 : 0)
-    const padR = 16
-    const padT = 8
-    const padB = 26 + (spec.xAxisTitle ? 16 : 0)
-    const plotW = Math.max(1, width - padL - padR)
-    const plotH = Math.max(1, height - padT - padB)
-    const plot = { x: padL, y: padT, w: plotW, h: plotH }
-
-    const refs = (spec.referenceLines ?? []).map((r) => r.value)
-    const dom = spec.stacked100 ? niceScale(0, 100) : axisDomain(series, spec.categories, stacked, refs)
-    const xOf = (v: number) => round(padL + ((v - dom.min) / (dom.max - dom.min || 1)) * plotW)
-
-    const n = spec.categories.length
-    const slot = plotH / Math.max(1, n)
-    const groupPad = slot * 0.2
-    const inner = slot - groupPad
-    const bandTop = (i: number) => padT + slot * i + groupPad / 2
-    const xBase = xOf(Math.min(Math.max(0, dom.min), dom.max))
-
-    const bars: ChartBar[] = []
-    if (stacked) {
-      const totals = spec.stacked100
-        ? spec.categories.map(
-            (_, i) => series.reduce((sum, s) => sum + Math.abs(Number.isFinite(s.values[i]!) ? s.values[i]! : 0), 0) || 1,
-          )
-        : null
-      const pos = new Array(n).fill(0)
-      const neg = new Array(n).fill(0)
-      for (const s of series) {
-        s.values.forEach((v, i) => {
-          if (!Number.isFinite(v)) return
-          const vp = totals ? (v / totals[i]!) * 100 : v
-          let xL: number
-          let xR: number
-          if (vp >= 0) {
-            xL = xOf(pos[i])
-            xR = xOf(pos[i] + vp)
-            pos[i] += vp
-          } else {
-            xL = xOf(neg[i] + vp)
-            xR = xOf(neg[i])
-            neg[i] += vp
-          }
-          bars.push({
-            x: Math.min(xL, xR),
-            y: round(bandTop(i)),
-            w: round(Math.abs(xR - xL)),
-            h: round(Math.max(1, inner)),
-            color: s.color,
-            label: spec.categories[i] ?? String(i),
-            series: s.label,
-            value: v,
-          })
-        })
-      }
-    } else {
-      const barH = inner / series.length
-      series.forEach((s, bi) => {
-        s.values.forEach((v, i) => {
-          if (!Number.isFinite(v)) return
-          const xV = xOf(v)
-          bars.push({
-            x: Math.min(xV, xBase),
-            y: round(bandTop(i) + barH * bi),
-            w: round(Math.max(1, Math.abs(xV - xBase))),
-            h: round(Math.max(1, barH - 1)),
-            color: s.color,
-            label: spec.categories[i] ?? String(i),
-            series: s.label,
-            value: v,
-          })
-        })
-      })
-    }
-
-    const valueTicks: ChartCategoryTick[] = dom.ticks.map((value) => ({
-      label: spec.stacked100 ? `${fmtTick(value)}%` : formatChartValue(value, spec.valueFormat, spec),
-      x: xOf(value),
-    }))
-    const catTicks: ChartAxisTick[] = spec.categories.map((label, i) => ({
-      value: i,
-      y: round(bandTop(i) + inner / 2),
-      label,
-    }))
-    const referenceLinesV: ChartRefLineGeoV[] = (spec.referenceLines ?? []).map((ref) => ({
-      x: xOf(ref.value),
-      label: ref.label ?? formatChartValue(ref.value, spec.valueFormat, spec),
-      color: ref.color ?? '#ef4444',
-      dashed: ref.dashed !== false,
-    }))
-
-    return {
-      ...empty,
-      plot,
-      bars,
-      orientation: 'horizontal',
-      valueTicks,
-      catTicks,
-      referenceLinesV,
-      xLabelRotated: false,
-    }
-  }
-
-  // ---- Cartesian (bar / line / area, possibly combo + dual axis) ----------
-  const leftSeries = series.filter((s) => s.axis === 'left')
-  const rightSeries = series.filter((s) => s.axis === 'right')
-  const hasRightAxis = rightSeries.length > 0
-
-  const maxLabel = spec.categories.reduce((m, c) => Math.max(m, c.length), 0)
-  const xLabelRotated = spec.categories.length > 8 || maxLabel > 9
-  // Grouped (nested) category axis: valid only when the spans cover every leaf.
-  const validGroups =
-    spec.categoryGroups &&
-    spec.categoryGroups.length > 0 &&
-    spec.xType !== 'time' &&
-    spec.orientation !== 'horizontal' &&
-    spec.categoryGroups.reduce((a, g) => a + g.span, 0) === spec.categories.length
-      ? spec.categoryGroups
-      : null
-  const groupTierH = validGroups ? 18 : 0
-  const padL = 48 + (spec.yAxisTitle ? 16 : 0)
-  const padR = (hasRightAxis ? 48 : 12) + (spec.y2AxisTitle ? 16 : 0)
-  const padT = 10
-  const padB = (xLabelRotated ? 54 : 28) + (spec.xAxisTitle ? 16 : 0) + groupTierH
-  const plotW = Math.max(1, width - padL - padR)
-  const plotH = Math.max(1, height - padT - padB)
-  const plot = { x: padL, y: padT, w: plotW, h: plotH }
-
-  const refsLeft = (spec.referenceLines ?? []).filter((r) => r.axis !== 'right').map((r) => r.value)
-  const refsRight = (spec.referenceLines ?? []).filter((r) => r.axis === 'right').map((r) => r.value)
-  const leftLog = spec.yScale === 'log'
-  const rightLog = spec.y2Scale === 'log'
-  const leftDom = spec.stacked100
-    ? niceScale(0, 100)
-    : axisDomain(leftSeries, spec.categories, stacked, refsLeft, leftLog)
-  const rightDom = hasRightAxis
-    ? spec.stacked100
-      ? niceScale(0, 100)
-      : axisDomain(rightSeries, spec.categories, stacked, refsRight, rightLog)
-    : null
-
-  /** Map a data value to a y pixel. Returns NaN for non-positive values on
-   *  a log axis so callers can drop the point (line gap / missing bar). */
-  const yOf = (dom: NiceScale, v: number, isLog = false) => {
-    const t = project(v, dom.min, dom.max, isLog)
-    if (t === null) return NaN
-    return round(padT + plotH - t * plotH)
-  }
-  const yLeft = (v: number) => yOf(leftDom, v, leftLog)
-  const yRight = (v: number) => yOf(rightDom ?? leftDom, v, rightLog)
-  const domOf = (s: ResolvedSeries) => (s.axis === 'right' ? rightDom ?? leftDom : leftDom)
-  const isLogOf = (s: ResolvedSeries) => (s.axis === 'right' ? rightLog : leftLog)
-
-  const n = spec.categories.length
-  const slot = plotW / Math.max(1, n)
-
-  // X positions. A time axis spaces points by actual time (irregular gaps);
-  // a category axis is uniform. (Bars stay uniform either way.)
-  // Two date modes, and the difference is only where the marks go: `'time'`
-  // positions by the timestamp, `'ordinal-time'` positions by the index and
-  // uses the dates for labels alone. Both parse; only one scales.
-  const isDateAxis = spec.xType === 'time' || spec.xType === 'ordinal-time'
-  const timeVals = isDateAxis ? spec.categories.map((c) => Date.parse(c)) : null
-  const timeOk = !!timeVals && timeVals.some((t) => Number.isFinite(t))
-  const timeScaled = timeOk && spec.xType === 'time'
-  const tMin = timeOk ? Math.min(...timeVals!.filter(Number.isFinite)) : 0
-  const tSpan = timeOk ? Math.max(...timeVals!.filter(Number.isFinite)) - tMin || 1 : 1
-  const xCenter = (i: number) =>
-    timeScaled && Number.isFinite(timeVals![i])
-      ? round(padL + ((timeVals![i]! - tMin) / tSpan) * plotW)
-      : round(padL + slot * i + slot / 2)
-  const xTicks: ChartCategoryTick[] = timeScaled
-    ? dateTicks(tMin, tMin + tSpan).map((t) => ({
-        label: fmtDate(t, tSpan),
-        x: round(padL + ((t - tMin) / tSpan) * plotW),
-      }))
-    : timeOk
-      ? // Ordinal: ticks land on points that exist, labelled from their dates.
-        ordinalDateTicks(timeVals!).map((i) => ({
-          label: fmtDate(timeVals![i]!, tSpan),
-          x: xCenter(i),
-        }))
-      : thinCategoryTicks(spec.categories, xCenter, slot, xLabelRotated)
-
-  // Parent-tier ticks for a grouped category axis: each spans its leaves.
-  const categoryGroupTicks: ChartGeometry['categoryGroupTicks'] = []
-  if (validGroups && !timeOk) {
-    let start = 0
-    for (const g of validGroups) {
-      const x0 = round(padL + slot * start)
-      const x1 = round(padL + slot * (start + g.span))
-      categoryGroupTicks.push({ label: g.label, x0, x1, xCenter: round((x0 + x1) / 2) })
-      start += g.span
-    }
-  }
-
-  const barSeries = series.filter((s) => s.kind === 'bar')
-  const bars: ChartBar[] = []
-  if (barSeries.length) {
-    const groupPad = slot * 0.2
-    if (stacked) {
-      const inner = slot - groupPad
-      const x0 = (i: number) => padL + slot * i + groupPad / 2
-      // Stack independently per axis so dual-axis stacks line up to their own scale.
-      for (const axis of ['left', 'right'] as const) {
-        const axisBars = barSeries.filter((s) => s.axis === axis)
-        if (!axisBars.length) continue
-        const yA = axis === 'right' ? yRight : yLeft
-        // 100% mode normalizes each category to its absolute total.
-        const totals = spec.stacked100
-          ? spec.categories.map(
-              (_, i) =>
-                axisBars.reduce(
-                  (sum, s) => sum + Math.abs(Number.isFinite(s.values[i]!) ? s.values[i]! : 0),
-                  0,
-                ) || 1,
-            )
-          : null
-        const pos = new Array(n).fill(0)
-        const neg = new Array(n).fill(0)
-        for (const s of axisBars) {
-          s.values.forEach((v, i) => {
-            if (!Number.isFinite(v)) return
-            const vp = totals ? (v / totals[i]!) * 100 : v
-            let yTop: number
-            let yBot: number
-            if (vp >= 0) {
-              yTop = yA(pos[i] + vp)
-              yBot = yA(pos[i])
-              pos[i] += vp
-            } else {
-              yTop = yA(neg[i])
-              yBot = yA(neg[i] + vp)
-              neg[i] += vp
-            }
-            bars.push({
-              x: round(x0(i)),
-              y: Math.min(yTop, yBot),
-              w: round(Math.max(1, inner)),
-              h: round(Math.abs(yBot - yTop)),
-              color: s.color,
-              label: spec.categories[i] ?? String(i),
-              series: s.label,
-              value: v,
-            })
-          })
-        }
-      }
-    } else {
-      const inner = slot - groupPad
-      const barW = inner / barSeries.length
-      barSeries.forEach((s, bi) => {
-        const dom = domOf(s)
-        const log = isLogOf(s)
-        // Log axis: bars grow from the axis floor (dom.min) up to v rather
-        // than from 0, since 0 is invalid in log space.
-        const base = log ? yOf(dom, dom.min, log) : yOf(dom, Math.min(Math.max(0, dom.min), dom.max), log)
-        s.values.forEach((v, i) => {
-          if (!Number.isFinite(v)) return
-          if (log && v <= 0) return
-          const x = padL + slot * i + groupPad / 2 + barW * bi
-          const yV = yOf(dom, v, log)
-          bars.push({
-            x: round(x),
-            y: Math.min(yV, base),
-            w: round(Math.max(1, barW - 1)),
-            h: round(Math.max(1, Math.abs(yV - base))),
-            color: s.color,
-            label: spec.categories[i] ?? String(i),
-            series: s.label,
-            value: v,
-          })
-        })
-      })
-    }
-  }
-
-  // Candlesticks / OHLC bars. Laid out once; the two marks differ only in how
-  // the renderer paints them, so there is no second geometry pass.
-  const candleSeries = series.filter((s) => s.kind === 'candle')
-  const candles: ChartCandle[] = []
-  if (candleSeries.length) {
-    const upColor = spec.candleColors?.up ?? '#16a34a'
-    const downColor = spec.candleColors?.down ?? '#ef4444'
-    // Share the slot when two instruments are charted together, the same way
-    // grouped bars do.
-    const bodyW = Math.max(1, (slot * 0.7) / candleSeries.length)
-    candleSeries.forEach((s, si) => {
-      const dom = domOf(s)
-      const log = isLogOf(s)
-      ;(s.ohlc ?? []).forEach((k, i) => {
-        if (!k) return
-        if (![k.o, k.h, k.l, k.c].every(Number.isFinite)) return
-        // A log price axis is genuinely used for long histories, and a
-        // non-positive price has no place on one.
-        if (log && (k.o <= 0 || k.h <= 0 || k.l <= 0 || k.c <= 0)) return
-        const centre = padL + slot * i + slot / 2
-        const x = centre - (bodyW * candleSeries.length) / 2 + bodyW * si
-        const yOpen = yOf(dom, k.o, log)
-        const yClose = yOf(dom, k.c, log)
-        const up = k.c >= k.o
-        candles.push({
-          x: round(x),
-          w: round(bodyW),
-          xCenter: round(x + bodyW / 2),
-          yOpen,
-          yClose,
-          yHigh: yOf(dom, k.h, log),
-          yLow: yOf(dom, k.l, log),
-          bodyY: Math.min(yOpen, yClose),
-          // A doji closes where it opened; keep it visible as a 1px line
-          // rather than a zero-height rect that paints nothing.
-          bodyH: Math.max(1, Math.abs(yClose - yOpen)),
-          up,
-          color: up ? upColor : downColor,
-          label: spec.categories[i] ?? String(i),
-          series: s.label,
-          o: k.o,
-          h: k.h,
-          l: k.l,
-          c: k.c,
-        })
-      })
-    })
-  }
-
-  // Box plots. Same slot-sharing as grouped bars and candles, so several
-  // samples can sit side by side under one category.
-  const boxSeries = series.filter((s) => s.kind === 'box')
-  const boxes: ChartBox[] = []
-  if (boxSeries.length) {
-    const boxW = Math.max(1, (slot * 0.6) / boxSeries.length)
-    boxSeries.forEach((s, si) => {
-      const dom = domOf(s)
-      const log = isLogOf(s)
-      ;(s.boxes ?? []).forEach((b, i) => {
-        if (!b) return
-        if (![b.min, b.q1, b.median, b.q3, b.max].every(Number.isFinite)) return
-        if (log && b.min <= 0) return
-        const centre = padL + slot * i + slot / 2
-        const x = centre - (boxW * boxSeries.length) / 2 + boxW * si
-        const yQ1 = yOf(dom, b.q1, log)
-        const yQ3 = yOf(dom, b.q3, log)
-        boxes.push({
-          x: round(x),
-          w: round(boxW),
-          xCenter: round(x + boxW / 2),
-          yMin: yOf(dom, b.min, log),
-          yQ1,
-          yMedian: yOf(dom, b.median, log),
-          yQ3,
-          yMax: yOf(dom, b.max, log),
-          boxY: Math.min(yQ1, yQ3),
-          // A sample with no spread would otherwise paint nothing at all.
-          boxH: Math.max(1, Math.abs(yQ1 - yQ3)),
-          outliers: (b.outliers ?? [])
-            .filter((o) => Number.isFinite(o) && (!log || o > 0))
-            .map((o) => ({ y: yOf(dom, o, log), value: o })),
-          color: s.color,
-          label: spec.categories[i] ?? String(i),
-          series: s.label,
-          min: b.min,
-          q1: b.q1,
-          median: b.median,
-          q3: b.q3,
-          max: b.max,
-        })
-      })
-    })
-  }
-
-  // Error bars. Not a mark of their own: they annotate whatever the series
-  // already draws, so this runs over every series carrying `errors` regardless
-  // of kind, and the geometry sits in its own array so no existing loop changes.
-  const errorBars: ChartErrorBar[] = []
-  for (const s of series) {
-    if (!s.errors) continue
-    const dom = domOf(s)
-    const log = isLogOf(s)
-    s.errors.forEach((e, i) => {
-      const v = s.values[i]
-      if (!Number.isFinite(v)) return
-      const span = errorSpan(e, v!)
-      if (!span) return
-      if (log && span.lo <= 0) return
-      errorBars.push({
-        xCenter: round(padL + slot * i + slot / 2),
-        yLo: yOf(dom, span.lo, log),
-        yHi: yOf(dom, span.hi, log),
-        cap: round(Math.min(6, slot * 0.15)),
-        color: s.color,
-        label: spec.categories[i] ?? String(i),
-        series: s.label,
-        lo: span.lo,
-        hi: span.hi,
-      })
-    })
-  }
-
-  // Lines / areas. Stacked areas accumulate per axis; others fill to baseline.
-  const lines: ChartLine[] = []
-  const areaCum: Record<'left' | 'right', number[]> = {
-    left: new Array(n).fill(0),
-    right: new Array(n).fill(0),
-  }
-  // 100% mode: per-axis per-category totals to normalize stacked areas to 100.
-  const areaTotals: Record<'left' | 'right', number[] | null> = { left: null, right: null }
-  if (spec.stacked100) {
-    for (const axis of ['left', 'right'] as const) {
-      const areaSeries = series.filter((s) => s.kind === 'area' && s.axis === axis)
-      if (areaSeries.length) {
-        areaTotals[axis] = spec.categories.map(
-          (_, i) =>
-            areaSeries.reduce(
-              (sum, s) => sum + Math.abs(Number.isFinite(s.values[i]!) ? s.values[i]! : 0),
-              0,
-            ) || 1,
-        )
-      }
-    }
-  }
-  for (const s of series) {
-    // Bars, candles and boxes draw their own marks. Candles and boxes
-    // especially: `values` holds their closes / medians so that tooltips, CSV
-    // and overlays work, and without this guard that same array was ALSO drawn
-    // as a line, laying a dotted close-line straight over every candle. Boxes
-    // would do exactly the same thing through the median.
-    if (s.kind === 'bar' || s.kind === 'candle' || s.kind === 'box') continue
-    const dom = domOf(s)
-    const log = isLogOf(s)
-    const yA = (v: number) => yOf(dom, v, log)
-    const isStackedArea = stacked && s.kind === 'area'
-    const px = (i: number) => xCenter(i)
-    let pts: ChartLinePoint[]
-    let baselinePts: Array<{ x: number; y: number }> | null = null
-    if (isStackedArea) {
-      // Stacked areas treat a gap as 0 so the stack stays continuous.
-      const cum = areaCum[s.axis]
-      const prev = cum.slice()
-      const totals = areaTotals[s.axis]
-      pts = s.values.map((v, i) => {
-        const vv = Number.isFinite(v) ? v : 0
-        // 100% mode positions by share of the category total; value stays original.
-        const norm = totals ? (vv / totals[i]!) * 100 : vv
-        const c = (cum[i] ?? 0) + norm
-        cum[i] = c
-        return { x: px(i), y: yA(c), label: spec.categories[i] ?? String(i), value: v, defined: Number.isFinite(v) }
-      })
-      baselinePts = prev.map((c, i) => ({ x: px(i), y: yA(c) }))
-    } else {
-      pts = s.values.map((v, i) => {
-        const ok = Number.isFinite(v)
-        return { x: px(i), y: ok ? yA(v) : NaN, label: spec.categories[i] ?? String(i), value: v, defined: ok }
-      })
-    }
-    // Build the line - smoothed via monotone cubic when requested, else
-    // straight polylines. Either way, gaps break the path cleanly.
-    const smooth = !!s.smooth
-    const path = buildLinePath(pts, smooth)
-
-    let areaPath = ''
-    if (s.kind === 'area' && pts.length) {
-      if (baselinePts) {
-        const top = smooth
-          ? monotoneCubicPath(pts.map((p) => ({ x: p.x, y: p.y })))
-          : pts.map((p, i) => `${i === 0 ? 'M' : 'L'}${p.x},${p.y}`).join(' ')
-        const back = smooth
-          ? `L${baselinePts[baselinePts.length - 1]!.x},${baselinePts[baselinePts.length - 1]!.y} ` +
-            monotoneCubicPath(baselinePts.slice().reverse()).replace(/^M[^ ]+ /, '')
-          : baselinePts.slice().reverse().map((p) => `L${p.x},${p.y}`).join(' ')
-        areaPath = `${top} ${back} Z`
-      } else {
-        // One filled polygon per contiguous run of defined points.
-        const baseY = round(yA(Math.min(Math.max(0, dom.min), dom.max)))
-        const runs: ChartLinePoint[][] = []
-        let cur: ChartLinePoint[] = []
-        for (const p of pts) {
-          if (p.defined) cur.push(p)
-          else if (cur.length) {
-            runs.push(cur)
-            cur = []
-          }
-        }
-        if (cur.length) runs.push(cur)
-        areaPath = runs
-          .map((run) => {
-            const top = smooth
-              ? monotoneCubicPath(run.map((p) => ({ x: p.x, y: p.y })))
-              : run.map((p, i) => `${i === 0 ? 'M' : 'L'}${p.x},${p.y}`).join(' ')
-            return `${top} L${run[run.length - 1]!.x},${baseY} L${run[0]!.x},${baseY} Z`
-          })
-          .join(' ')
-      }
-    }
-
-    // Confidence band: shaded envelope between upperValues / lowerValues.
-    // Both arrays must be present and aligned to the value array.
-    let bandPath = ''
-    if (s.upperValues?.length === s.values.length && s.lowerValues?.length === s.values.length) {
-      const upperPts: Array<{ x: number; y: number }> = []
-      const lowerPts: Array<{ x: number; y: number }> = []
-      for (let i = 0; i < s.values.length; i += 1) {
-        const u = s.upperValues[i]!
-        const lo = s.lowerValues[i]!
-        if (!Number.isFinite(u) || !Number.isFinite(lo)) continue
-        if (log && (u <= 0 || lo <= 0)) continue
-        upperPts.push({ x: px(i), y: yA(u) })
-        lowerPts.push({ x: px(i), y: yA(lo) })
-      }
-      if (upperPts.length >= 2) {
-        const top = smooth
-          ? monotoneCubicPath(upperPts)
-          : upperPts.map((p, i) => `${i === 0 ? 'M' : 'L'}${p.x},${p.y}`).join(' ')
-        const back = smooth
-          ? `L${lowerPts[lowerPts.length - 1]!.x},${lowerPts[lowerPts.length - 1]!.y} ` +
-            monotoneCubicPath(lowerPts.slice().reverse()).replace(/^M[^ ]+ /, '')
-          : lowerPts.slice().reverse().map((p) => `L${p.x},${p.y}`).join(' ')
-        bandPath = `${top} ${back} Z`
-      }
-    }
-
-    lines.push({ path, areaPath, color: s.color, label: s.label, points: pts, bandPath })
-  }
-
-  // Under `stacked100` the axis is a share of the total, not the measure, so
-  // it is labelled as a percentage whatever `valueFormat` says. Formatting it
-  // as currency gives an axis reading "$0 .. $100" for what are percentages -
-  // which is what it did, unnoticed, while `stacked100` was reachable only
-  // from config.
-  const tickFor = (dom: NiceScale, log: boolean): ChartAxisTick[] =>
-    dom.ticks.map((value) => ({
-      value,
-      y: yOf(dom, value, log),
-      label: spec.stacked100 ? `${round(value)}%` : formatChartValue(value, spec.valueFormat, spec),
-    }))
-
-  const referenceLines: ChartRefLineGeo[] = (spec.referenceLines ?? []).map((ref) => {
-    const onRight = ref.axis === 'right'
-    const dom = onRight ? (rightDom ?? leftDom) : leftDom
-    const log = onRight ? rightLog : leftLog
-    return {
-      y: yOf(dom, ref.value, log),
-      label: ref.label ?? formatChartValue(ref.value, spec.valueFormat, spec),
-      color: ref.color ?? '#ef4444',
-      dashed: ref.dashed !== false,
-    }
-  })
-
-  // ---- Overlays: trendline / moving average ------------------------
-  // For every series with an `overlay`, compute the smoothed values and
-  // render as a dashed line in the source series' color (or overlayColor).
-  const overlays: ChartLine[] = []
-  for (const s of series) {
-    if (!s.overlay) continue
-    const dom = domOf(s)
-    const log = isLogOf(s)
-    const overlayVals = computeOverlay(s.values, s.overlay)
-    const color = s.overlayColor ?? s.color
-    const pts: ChartLinePoint[] = overlayVals.map((v, i) => {
-      const ok = Number.isFinite(v) && (!log || v > 0)
-      return {
-        x: xCenter(i),
-        y: ok ? yOf(dom, v, log) : NaN,
-        label: spec.categories[i] ?? String(i),
-        value: v,
-        defined: ok,
-      }
-    })
-    const path = buildLinePath(pts, !!s.smooth)
-    overlays.push({
-      path,
-      areaPath: '',
-      color,
-      label: `${s.label} (${s.overlay})`,
-      points: pts,
-    })
-  }
-
-  // ---- Annotations: resolve data-space anchors to pixel coords ------
-  const annotations: ChartGeometry['annotations'] = []
-  for (const a of (spec.annotations ?? [])) {
-    let ax: number | null = null
-    let ay: number | null = null
-    if ('category' in a.at) {
-      const ci = spec.categories.indexOf(a.at.category)
-      if (ci < 0) continue
-      ax = xCenter(ci)
-      // Anchor to the named series' value at that category, else just
-      // mid-plot. Picks the first matching series if `series` is set.
-      const seriesName = a.at.series
-      const s = seriesName ? series.find((x) => x.label === seriesName) : series[0]
-      if (s) {
-        const v = s.values[ci]
-        if (Number.isFinite(v)) ay = yOf(domOf(s), v as number, isLogOf(s))
-      }
-      if (ay == null) ay = padT + plotH / 2
-    } else {
-      // Raw x/y in data space (x ignored for category x-axis; takes the
-      // mid-plot in that case). y projects through the left axis.
-      ax = padL + plotW / 2
-      if (Number.isFinite(a.at.y as number)) ay = yOf(leftDom, a.at.y as number, leftLog)
-      else ay = padT + plotH / 2
-    }
-    if (ax != null && ay != null && Number.isFinite(ay)) {
-      annotations.push({
-        x: ax,
-        y: ay,
-        label: a.label,
-        color: a.color ?? '#0f172a',
-        placement: a.placement ?? 'top',
-      })
-    }
-  }
-
-  return {
-    ...empty,
-    plot,
-    // What a caller needs to put its own marks in this chart's coordinates.
-    // Reported rather than recomputed, so a custom mark lands on exactly the
-    // scale the built-in ones did - including the nice-scale rounding and the
-    // "always include zero" rule, which are impossible to guess from outside.
-    axes: {
-      y: { min: leftDom.min, max: leftDom.max, log: leftLog },
-      y2: rightDom ? { min: rightDom.min, max: rightDom.max, log: rightLog } : null,
-      slot,
-      count: spec.categories.length,
-    },
-    bars,
-    candles,
-    boxes,
-    errorBars,
-    lines,
-    yTicks: tickFor(leftDom, leftLog),
-    y2Ticks: rightDom ? tickFor(rightDom, rightLog) : [],
-    hasRightAxis,
-    xTicks,
-    categoryGroupTicks,
-    xLabelRotated: timeOk ? false : xLabelRotated,
-    referenceLines,
-    overlays,
-    annotations,
-  }
+    spec.orientation === 'horizontal' && spec.type !== 'histogram' && series.length > 0 && series.every((s) => s.kind === 'bar')
+  if (horizontal) return layoutHorizontalBars(ctx)
+  return layoutCartesian(ctx)
 }
 
 /**
@@ -2833,32 +284,18 @@ export function buildChart(spec: ChartSpec, theme: 'light' | 'dark' = 'light'):
 export function sliceChartWindow(spec: ChartSpec, lo: number, hi: number): ChartSpec {
   const from = Math.max(0, lo)
   const to = Math.min(spec.categories.length - 1, hi)
-  const cut = <T,>(arr: T[] | undefined): T[] | undefined =>
-    arr ? arr.slice(from, to + 1) : undefined
-  return {
-    ...spec,
-    categories: spec.categories.slice(from, to + 1),
-    // EVERY per-category array on a series has to be cut here, not just the
-    // ones that existed when this function was written. A missed one does not
-    // throw: the geometry keeps indexing the full-length array against the
-    // sliced categories, so marks land at the wrong x or off the plot entirely.
-    // `upperValues` / `lowerValues` were missed once and silently dropped the
-    // confidence band on zoom; `ohlc` was missed the same way and drew a
-    // zoomed candlestick chart against the wrong categories.
-    series: spec.series.map((s) => ({
-      ...s,
-      values: s.values.slice(from, to + 1),
-      rowIds: cut(s.rowIds),
-      upperValues: cut(s.upperValues),
-      lowerValues: cut(s.lowerValues),
-      ohlc: cut(s.ohlc),
-      boxes: cut(s.boxes),
-      errors: cut(s.errors),
-    })),
-    // Per-category, so it has to travel with the window or the waterfall's
-    // running total resets on the wrong bars.
-    waterfallTotals: cut(spec.waterfallTotals),
-  }
+  if (to < from) return { ...spec, categories: [], series: spec.series.map((s) => ({ ...s, values: [] })) }
+  // EVERY per-category array on a series has to be cut here, not just the
+  // ones that existed when this function was written. A missed one does not
+  // throw: the geometry keeps indexing the full-length array against the
+  // sliced categories, so marks land at the wrong x or off the plot entirely.
+  // `upperValues` / `lowerValues` were missed once and silently dropped the
+  // confidence band on zoom; `ohlc` was missed the same way. The list of those
+  // arrays now lives in one constant (PER_CATEGORY_SERIES_KEYS) shared with
+  // decimation, and `pickCategories` is the one function that applies it.
+  const indices: number[] = new Array(to - from + 1)
+  for (let i = from; i <= to; i += 1) indices[i - from] = i
+  return pickCategories(spec, indices)
 }
 
 /**
@@ -2877,14 +314,25 @@ export function rowsToChartSpec<T extends Record<string, unknown>>(
     value: (keyof T & string) | Array<keyof T & string>
     /** Pivot dimension: one series per distinct value of this field. */
     series?: keyof T & string
-    reduce?: 'sum' | 'avg' | 'count'
+    /** How each group collapses to one number. Default `'sum'`. See
+     *  {@link ChartReducer} for the full list (min, max, median, p90, ...). */
+    reduce?: ChartReducer
+    /**
+     * Group a date category by calendar unit instead of by exact value:
+     * `'month'` files every row of March under `2026-03-01`. Categories come
+     * out as ISO dates in chronological order and the spec's x axis is set to
+     * `'ordinal-time'`, so the ticks read as dates. Rows whose category does
+     * not parse as a date are dropped.
+     */
+    bucket?: ChartTimeBucket
     seriesLabel?: string
     width?: number
     height?: number
     stacked?: boolean
     stacked100?: boolean
     palette?: string[]
-    /** Order categories. Defaults to insertion order (or value-desc when topN). */
+    /** Order categories. Defaults to insertion order (or value-desc when topN,
+     *  or chronological when bucketed). */
     sort?: 'value-desc' | 'value-asc' | 'category' | 'none'
     /** Keep only the top N categories; bucket the rest into "Other". */
     topN?: number
@@ -2896,10 +344,15 @@ export function rowsToChartSpec<T extends Record<string, unknown>>(
     idField?: keyof T & string
   },
 ): ChartSpec {
-  const reduce = opts.reduce ?? 'sum'
+  const reduce: ChartReducer = opts.reduce ?? 'sum'
+  const wantSamples = reducerNeedsSamples(reduce)
   const valueFields = Array.isArray(opts.value) ? opts.value : [opts.value]
-  const reduceCell = (sum: number, count: number) =>
-    reduce === 'count' ? count : reduce === 'avg' ? (count ? sum / count : 0) : sum
+  // The three original reducers run on a sum and a count; the rest keep every
+  // observation, which is what a median or a percentile needs.
+  const reduceCell = (cell: Cell) =>
+    wantSamples
+      ? reduceValues(cell.samples, reduce)
+      : reduce === 'count' ? cell.count : reduce === 'avg' ? (cell.count ? cell.sum / cell.count : 0) : cell.sum
 
   const categories: string[] = []
   const catIndex = new Map<string, number>()
@@ -2914,7 +367,7 @@ export function rowsToChartSpec<T extends Record<string, unknown>>(
   }
 
   // Series keyed by name -> per-category {sum,count,rowIds}.
-  type Cell = { sum: number; count: number; rowIds: Array<string | number> }
+  type Cell = { sum: number; count: number; rowIds: Array<string | number>; samples: number[] }
   const seriesMap = new Map<string, Cell[]>()
   const ensureSeries = (name: string) => {
     let arr = seriesMap.get(name)
@@ -2924,42 +377,40 @@ export function rowsToChartSpec<T extends Record<string, unknown>>(
     }
     return arr
   }
+  const note = (cell: Cell, num: number, rowId: string | number | undefined) => {
+    cell.sum += num
+    cell.count += 1
+    if (wantSamples) cell.samples.push(num)
+    if (rowId !== undefined) cell.rowIds.push(rowId)
+  }
+  const fresh = (): Cell => ({ sum: 0, count: 0, rowIds: [], samples: [] })
 
   const trackIds = opts.idField !== undefined
   for (const row of rows) {
-    const cat = String(row[opts.category] ?? '')
+    const raw = row[opts.category]
+    const cat = opts.bucket ? bucketStart(raw as string | number | Date, opts.bucket) : String(raw ?? '')
+    if (opts.bucket && !cat) continue
     const ci = ensureCat(cat)
     const rowId = trackIds ? (row[opts.idField as keyof T] as string | number) : undefined
     if (opts.series) {
       const sName = String(row[opts.series] ?? '')
       const arr = ensureSeries(sName)
       const num = Number(row[valueFields[0]!])
-      const cell = (arr[ci] ??= { sum: 0, count: 0, rowIds: [] })
-      if (Number.isFinite(num)) {
-        cell.sum += num
-        cell.count += 1
-        if (rowId !== undefined) cell.rowIds.push(rowId)
-      }
+      const cell = (arr[ci] ??= fresh())
+      if (Number.isFinite(num)) note(cell, num, rowId)
     } else {
       for (const vf of valueFields) {
         const arr = ensureSeries(vf)
         const num = Number(row[vf])
-        const cell = (arr[ci] ??= { sum: 0, count: 0, rowIds: [] })
-        if (Number.isFinite(num)) {
-          cell.sum += num
-          cell.count += 1
-          if (rowId !== undefined) cell.rowIds.push(rowId)
-        }
+        const cell = (arr[ci] ??= fresh())
+        if (Number.isFinite(num)) note(cell, num, rowId)
       }
     }
   }
 
   const entries = [...seriesMap.entries()].map(([name, arr]) => ({
     label: opts.series ? name : opts.seriesLabel && valueFields.length === 1 ? opts.seriesLabel : name,
-    values: categories.map((_, i) => {
-      const cell = arr[i] ?? { sum: 0, count: 0, rowIds: [] as Array<string | number> }
-      return reduceCell(cell.sum, cell.count)
-    }),
+    values: categories.map((_, i) => reduceCell(arr[i] ?? fresh())),
     rowIds: trackIds
       ? categories.map((_, i) => (arr[i]?.rowIds ?? []).slice())
       : undefined,
@@ -2969,7 +420,7 @@ export function rowsToChartSpec<T extends Record<string, unknown>>(
   const totals = categories.map((_, i) =>
     entries.reduce((sum, e) => sum + (Number.isFinite(e.values[i]!) ? e.values[i]! : 0), 0),
   )
-  const sort = opts.sort ?? (opts.topN ? 'value-desc' : 'none')
+  const sort = opts.sort ?? (opts.topN ? 'value-desc' : opts.bucket ? 'category' : 'none')
   const order = categories.map((_, i) => i)
   if (sort === 'value-desc') order.sort((a, b) => totals[b]! - totals[a]!)
   else if (sort === 'value-asc') order.sort((a, b) => totals[a]! - totals[b]!)
@@ -2978,9 +429,16 @@ export function rowsToChartSpec<T extends Record<string, unknown>>(
   let finalCategories: string[]
   let finalSeries: ChartSeries[]
   if (opts.topN && order.length > opts.topN) {
-    const keep = order.slice(0, opts.topN)
-    const rest = order.slice(opts.topN)
-    finalCategories = keep.map((i) => categories[i]!).concat(opts.otherLabel ?? 'Other')
+    const other = opts.otherLabel ?? 'Other'
+    // A real category may already be called "Other" (a survey's own bucket,
+    // a browser share's long tail). Two categories with one name is a
+    // duplicate key the renderer cannot draw, so the tail folds INTO that
+    // category rather than beside it: it is kept whether or not it made the
+    // top N, and the rest is added to it.
+    const own = order.find((i) => categories[i] === other)
+    const keep = order.slice(0, opts.topN).filter((i) => i !== own)
+    const rest = order.filter((i) => !keep.includes(i))
+    finalCategories = keep.map((i) => categories[i]!).concat(other)
     finalSeries = entries.map((e) => ({
       label: e.label,
       values: keep
@@ -3008,6 +466,146 @@ export function rowsToChartSpec<T extends Record<string, unknown>>(
     stacked: opts.stacked,
     stacked100: opts.stacked100,
     palette: opts.palette,
+    ...(opts.bucket ? { xType: 'ordinal-time' as const } : {}),
+  }
+}
+
+/**
+ * The bar-plus-line spec a pareto chart draws: categories sorted by value,
+ * bars for the values, and a cumulative-share line on the right axis pinned to
+ * 0..100 with a reference line at `threshold` (default 80, the "vital few").
+ * `buildChart` calls this for `type: 'pareto'`; call it yourself to get at the
+ * spec, or pass a ready spec whose first series is the values.
+ */
+export function paretoSpec(spec: ChartSpec, threshold = 80): ChartSpec {
+  const src = spec.series[0]
+  if (!src) return { ...spec, type: 'bar' }
+  const order = spec.categories.map((_, i) => i).sort((a, b) => (src.values[b] ?? 0) - (src.values[a] ?? 0))
+  const sorted = pickCategories(spec, order)
+  const values = sorted.series[0]!.values.map((v) => (Number.isFinite(v) ? Math.max(0, v) : 0))
+  const total = values.reduce((a, b) => a + b, 0) || 1
+  let cum = 0
+  const share = values.map((v) => {
+    cum += v
+    return Math.round((cum / total) * 1000) / 10
+  })
+  return {
+    ...sorted,
+    type: 'bar',
+    series: [
+      { ...sorted.series[0]!, type: 'bar' },
+      { label: 'Cumulative %', values: share, type: 'line', axis: 'right', marker: 'circle', color: sorted.series[0]!.overlayColor ?? '#ef4444' },
+    ],
+    y2Axis: { min: 0, max: 100, tickInterval: 25, formatter: (v) => `${v}%`, ...(spec.y2Axis ?? {}) },
+    referenceLines: [
+      ...(spec.referenceLines ?? []),
+      ...(threshold > 0 ? [{ value: threshold, axis: 'right' as const, label: `${threshold}%`, dashed: true }] : []),
+    ],
+  }
+}
+
+/**
+ * Bin one numeric field of the rows into a histogram spec. The categories are
+ * the bin midpoints on a numeric axis and `binEdges` labels the edges, so the
+ * bars touch and the axis reads `0, 10, 20` rather than `5, 15, 25`.
+ * `series` splits the sample into one histogram per distinct value.
+ */
+export function rowsToHistogramSpec<T extends Record<string, unknown>>(
+  rows: ReadonlyArray<T>,
+  opts: {
+    value: keyof T & string
+    series?: keyof T & string
+    seriesLabel?: string
+    bins?: number
+    binWidth?: number
+    method?: 'sturges' | 'fd' | 'sqrt'
+    min?: number
+    max?: number
+    palette?: string[]
+    width?: number
+    height?: number
+  },
+): ChartSpec {
+  const all = rows.map((r) => Number(r[opts.value])).filter(Number.isFinite)
+  // Bin the whole sample once so every split shares the same edges.
+  const bins = binValues(all, { bins: opts.bins, binWidth: opts.binWidth, method: opts.method, min: opts.min, max: opts.max })
+  const groups: Array<{ label: string; rows: ReadonlyArray<T> }> = opts.series
+    ? [...new Set(rows.map((r) => String(r[opts.series!] ?? '')))].map((g) => ({ label: g, rows: rows.filter((r) => String(r[opts.series!] ?? '') === g) }))
+    : [{ label: opts.seriesLabel ?? String(opts.value), rows }]
+  const series: ChartSeries[] = groups.map((g) => {
+    const counts = new Array<number>(bins.counts.length).fill(0)
+    const lo = bins.edges[0] ?? 0
+    for (const r of g.rows) {
+      const n = Number(r[opts.value])
+      if (!Number.isFinite(n) || !bins.width) continue
+      let i = Math.floor((n - lo) / bins.width)
+      if (i >= counts.length) i = counts.length - 1
+      if (i < 0) i = 0
+      counts[i] = (counts[i] ?? 0) + 1
+    }
+    return { label: g.label, values: counts }
+  })
+  return {
+    type: 'histogram',
+    categories: bins.categories,
+    series,
+    binEdges: bins.edges,
+    xType: 'number',
+    ...(opts.palette ? { palette: opts.palette } : {}),
+    ...(opts.width ? { width: opts.width } : {}),
+    ...(opts.height ? { height: opts.height } : {}),
+  }
+}
+
+/**
+ * A range (floating) bar or area spec from rows: one row per category with a
+ * low field and a high field, e.g. a day's low and high temperature, or a
+ * salary band. `series` splits into one range per distinct value.
+ */
+export function rowsToRangeSpec<T extends Record<string, unknown>>(
+  rows: ReadonlyArray<T>,
+  opts: {
+    type?: 'range-bar' | 'range-area'
+    category: keyof T & string
+    low: keyof T & string
+    high: keyof T & string
+    series?: keyof T & string
+    seriesLabel?: string
+    palette?: string[]
+    width?: number
+    height?: number
+  },
+): ChartSpec {
+  const cats: string[] = []
+  const seen = new Set<string>()
+  for (const r of rows) {
+    const c = String(r[opts.category] ?? '')
+    if (!seen.has(c)) { seen.add(c); cats.push(c) }
+  }
+  const names = opts.series
+    ? [...new Set(rows.map((r) => String(r[opts.series!] ?? '')))]
+    : [opts.seriesLabel ?? `${String(opts.low)} to ${String(opts.high)}`]
+  const series: ChartSeries[] = names.map((name) => {
+    const lows = new Array<number>(cats.length).fill(Number.NaN)
+    const highs = new Array<number>(cats.length).fill(Number.NaN)
+    for (const r of rows) {
+      if (opts.series && String(r[opts.series] ?? '') !== name) continue
+      const i = cats.indexOf(String(r[opts.category] ?? ''))
+      const lo = Number(r[opts.low])
+      const hi = Number(r[opts.high])
+      if (i < 0 || !Number.isFinite(lo) || !Number.isFinite(hi)) continue
+      lows[i] = Math.min(lo, hi)
+      highs[i] = Math.max(lo, hi)
+    }
+    return { label: name, values: highs, lowValues: lows }
+  })
+  return {
+    type: opts.type ?? 'range-bar',
+    categories: cats,
+    series,
+    ...(opts.palette ? { palette: opts.palette } : {}),
+    ...(opts.width ? { width: opts.width } : {}),
+    ...(opts.height ? { height: opts.height } : {}),
   }
 }
 
@@ -3107,6 +705,125 @@ export function specToSankey(spec: ChartSpec): {
   }
 }
 
+
+// ---- Panel format state -----------------------------------------------------
+
+/**
+ * What the grid panel's chart builder lets a reader change about the LOOK of
+ * a chart, as plain data so it can be saved with the view and applied to the
+ * spec the panel derives on every data change. Every field is optional and
+ * additive; an absent field leaves the derived spec alone. Series are keyed
+ * by label, so a per-series colour survives a re-sort of the categories.
+ */
+export type ChartFormatState = {
+  title?: string
+  subtitle?: string
+  caption?: string
+  /** Where the legend goes; `false` hides it. The panel reads this for the
+   *  component prop, it is not a spec field. */
+  legend?: 'top' | 'bottom' | 'left' | 'right' | false
+  xAxis?: { title?: string; gridLines?: boolean; labelRotation?: number | 'auto' }
+  yAxis?: { min?: number | null; max?: number | null; title?: string; gridLines?: boolean; format?: ChartValueFormat }
+  y2Axis?: { min?: number | null; max?: number | null; title?: string; gridLines?: boolean; format?: ChartValueFormat }
+  /** Per-series overrides, keyed by series label. */
+  series?: Record<string, {
+    color?: string
+    type?: 'bar' | 'line' | 'area'
+    axis?: 'left' | 'right'
+    marker?: ChartMarkerShape
+    strokeWidth?: number
+    dash?: string
+    smooth?: boolean
+    /** The stack group a bar or area joins; an empty string leaves the
+     *  group. See {@link ChartSeries.stack}. */
+    stack?: string
+  }>
+  /** Where data labels sit; `null` hides them. */
+  dataLabels?: 'inside' | 'outside' | 'top' | 'center' | null
+  palette?: string[] | null
+  /** Series names at the end of each line (`spec.seriesLabels`). */
+  seriesLabels?: boolean
+  /** The axis value pills on the crosshair. A component prop, like
+   *  `legend`: the panel reads it, the engine does not. */
+  crosshairLabels?: boolean
+  /** Below this rendered width in px the chart goes compact: no series or
+   *  data labels, vertical category labels, no legend. Appended to the
+   *  spec's own `responsive` rules as {@link CHART_RESPONSIVE_PRESETS}.compact. */
+  compactBelow?: number | null
+  /** Font, size and colours for the whole chart (`spec.style`), merged
+   *  over what the spec carries. */
+  style?: ChartStyle
+}
+
+/**
+ * Responsive rules the builder offers by name. `compact(maxWidth)` is the
+ * one the Format tab writes through `compactBelow`: the labels that crowd a
+ * narrow chart go, the category labels turn vertical, and the legend hides.
+ */
+export const CHART_RESPONSIVE_PRESETS = {
+  compact: (maxWidth: number): ChartResponsiveRule => ({
+    maxWidth,
+    spec: { seriesLabels: false, dataLabels: { show: false }, xAxis: { labelRotation: 90 } },
+    legend: false,
+  }),
+} as const
+
+/**
+ * Apply a {@link ChartFormatState} to a spec: a new spec with the titles,
+ * axis settings, palette and per-series styling merged in. Pure, so the
+ * panel can run it on every derived spec and a saved format keeps applying
+ * to fresh data. Unknown series labels are ignored.
+ */
+export function applyChartFormat(spec: ChartSpec, format: ChartFormatState | null | undefined): ChartSpec {
+  if (!format) return spec
+  const out: ChartSpec = { ...spec }
+  if (format.title !== undefined) out.title = format.title || undefined
+  if (format.subtitle !== undefined) out.subtitle = format.subtitle || undefined
+  if (format.caption !== undefined) out.caption = format.caption || undefined
+  if (format.palette) out.palette = format.palette
+  if (format.seriesLabels !== undefined) out.seriesLabels = format.seriesLabels
+  if (format.style) out.style = { ...spec.style, ...format.style }
+  if (format.compactBelow != null && format.compactBelow > 0) {
+    out.responsive = [...(spec.responsive ?? []), CHART_RESPONSIVE_PRESETS.compact(format.compactBelow)]
+  }
+  const axis = (base: ChartAxisConfig | undefined, f: NonNullable<ChartFormatState['yAxis']> | undefined): ChartAxisConfig | undefined => {
+    if (!f) return base
+    const next: ChartAxisConfig = { ...base }
+    if (f.min !== undefined) { if (f.min === null) delete next.min; else next.min = f.min }
+    if (f.max !== undefined) { if (f.max === null) delete next.max; else next.max = f.max }
+    if (f.title !== undefined) next.title = f.title || undefined
+    if (f.gridLines !== undefined) next.gridLines = f.gridLines
+    if (f.format !== undefined) next.format = f.format
+    return next
+  }
+  if (format.xAxis) {
+    const next: ChartAxisConfig = { ...out.xAxis }
+    if (format.xAxis.title !== undefined) next.title = format.xAxis.title || undefined
+    if (format.xAxis.gridLines !== undefined) next.gridLines = format.xAxis.gridLines
+    if (format.xAxis.labelRotation !== undefined) next.labelRotation = format.xAxis.labelRotation
+    out.xAxis = next
+  }
+  if (format.yAxis) out.yAxis = axis(out.yAxis, format.yAxis)
+  if (format.y2Axis) out.y2Axis = axis(out.y2Axis, format.y2Axis)
+  if (format.series) {
+    out.series = spec.series.map((s) => {
+      const f = format.series![s.label]
+      if (!f) return s
+      const next: ChartSeries = { ...s }
+      if (f.color) next.color = f.color
+      if (f.type) next.type = f.type
+      if (f.axis) next.axis = f.axis
+      if (f.marker) next.marker = f.marker
+      if (f.strokeWidth !== undefined) next.strokeWidth = f.strokeWidth
+      if (f.dash !== undefined) next.dash = f.dash || undefined
+      if (f.smooth !== undefined) next.smooth = f.smooth
+      if (f.stack !== undefined) next.stack = f.stack || undefined
+      return next
+    })
+  }
+  return out
+}
+
 /**
  * The chart types that read ROWS directly instead of a grouped grid, behind one
  * call. Returns `null` for every other type, which then goes through
@@ -3128,13 +845,32 @@ export function rowsToDirectSpec<T extends Record<string, unknown>>(
     /** Scatter's Y measure. */
     value2?: string
     series?: string
-    reduce?: 'sum' | 'avg' | 'count'
+    reduce?: ChartReducer
     palette?: string[]
+    /** Histogram: how many bins. Default: Sturges' rule. */
+    bins?: number
+    /** Candlestick / OHLC: the price columns, an optional volume, a calendar
+     *  bucket to roll the bars up to, and the candle style. `category` is
+     *  the date column. */
+    ohlc?: { open: string; high: string; low: string; close: string; volume?: string; bucket?: ChartTimeBucket; candleStyle?: ChartSpec['candleStyle']; lastPriceLine?: boolean }
   },
 ): ChartSpec | null {
   const cat = opts.category as (keyof T & string) | undefined
   const val = opts.value as (keyof T & string) | undefined
   const ser = opts.series as (keyof T & string) | undefined
+  if (type === 'candlestick' || type === 'ohlc') {
+    const o = opts.ohlc
+    if (!cat || !o) return null
+    const k = (f: string) => f as keyof T & string
+    return rowsToOhlcSpec(rows, {
+      date: cat, open: k(o.open), high: k(o.high), low: k(o.low), close: k(o.close),
+      ...(o.volume ? { volume: k(o.volume) } : {}),
+      ...(o.bucket ? { bucket: o.bucket } : {}),
+      ...(o.candleStyle ? { candleStyle: o.candleStyle } : {}),
+      ...(o.lastPriceLine ? { lastPriceLine: true } : {}),
+      type,
+    })
+  }
   if (type === 'scatter') {
     const y = opts.value2 as (keyof T & string) | undefined
     if (!val || !y) return null
@@ -3159,6 +895,46 @@ export function rowsToDirectSpec<T extends Record<string, unknown>>(
     if (opts.palette) spec.palette = opts.palette
     return spec
   }
+  if (type === 'histogram') {
+    if (!val) return null
+    return rowsToHistogramSpec(rows, {
+      value: val,
+      ...(ser ? { series: ser } : {}),
+      ...(opts.bins ? { bins: opts.bins } : {}),
+      ...(opts.palette ? { palette: opts.palette } : {}),
+    })
+  }
+  if (type === 'range-bar' || type === 'range-area' || type === 'dumbbell') {
+    // Two measures: the first is the low end, the second the high end, each
+    // reduced per category the way a bar would be.
+    const hi = opts.value2 as (keyof T & string) | undefined
+    if (!cat || !val || !hi) return null
+    const lows = rowsToChartSpec(rows, { type: 'bar', category: cat, value: val, ...(ser ? { series: ser } : {}), reduce: opts.reduce ?? 'sum' })
+    const highs = rowsToChartSpec(rows, { type: 'bar', category: cat, value: hi, ...(ser ? { series: ser } : {}), reduce: opts.reduce ?? 'sum' })
+    return {
+      type,
+      categories: highs.categories,
+      series: highs.series.map((s, i) => ({
+        ...s,
+        label: ser ? s.label : `${String(val)} to ${String(hi)}`,
+        lowValues: lows.series[i]?.values.map((v, k) => Math.min(v, s.values[k] ?? v)) ?? [],
+        values: s.values.map((v, k) => Math.max(v, lows.series[i]?.values[k] ?? v)),
+      })),
+      ...(opts.palette ? { palette: opts.palette } : {}),
+    }
+  }
+  if (type === 'bullet') {
+    if (!cat || !val) return null
+    const measure = rowsToChartSpec(rows, { type: 'bar', category: cat, value: val, reduce: opts.reduce ?? 'sum' })
+    const t = opts.value2 as (keyof T & string) | undefined
+    const target = t ? rowsToChartSpec(rows, { type: 'bar', category: cat, value: t, reduce: opts.reduce ?? 'sum' }) : null
+    return {
+      type: 'bullet',
+      categories: measure.categories,
+      series: [{ ...measure.series[0]!, ...(target ? { targets: target.series[0]!.values } : {}) }],
+      ...(opts.palette ? { palette: opts.palette } : {}),
+    }
+  }
   return null
 }
 
@@ -3306,7 +1082,7 @@ export function rowsToGaugeSpec<T extends Record<string, unknown>>(
   rows: ReadonlyArray<T>,
   opts: {
     value: keyof T & string
-    reduce?: 'sum' | 'avg' | 'count'
+    reduce?: ChartReducer
     min?: number
     max?: number
     unit?: string
@@ -3315,16 +1091,13 @@ export function rowsToGaugeSpec<T extends Record<string, unknown>>(
     height?: number
   },
 ): ChartSpec {
-  const reduce = opts.reduce ?? 'sum'
-  let sum = 0
-  let count = 0
+  const samples: number[] = []
   for (const row of rows) {
     const v = Number(row[opts.value])
-    if (!Number.isFinite(v)) continue
-    sum += v
-    count += 1
+    if (Number.isFinite(v)) samples.push(v)
   }
-  const value = reduce === 'count' ? count : reduce === 'avg' ? (count ? sum / count : 0) : sum
+  const reduced = reduceValues(samples, opts.reduce ?? 'sum')
+  const value = Number.isFinite(reduced) ? reduced : 0
   const min = opts.min ?? Math.min(0, value)
   const max = opts.max ?? (value > min ? niceScale(min, value).max : min + 1)
   return {