@succsoft/succapp 5.0.1 → 5.0.3

package/dist/cli/l10n/bundle.l10n.zh-cn.json

@@ -6,10 +6,22 @@
 	"err.net.connectionFailed": "无法连接到服务器：{url}{causeMessage}",
 	"err.net.connectionFailed.desc": "请检查服务器地址和网络连接，然后重试或重新登录。",
 	"err.login.notlogin": "认证失败，请重新登录",
+	"err.oauth2.tokenExpired": "OAuth2 访问令牌已过期。",
+	"err.login.oauthTimeout": "OAuth2 授权超时。",
+	"err.login.oauthTimeout.desc": "请重新登录并在浏览器中完成授权；无浏览器环境可改用 PAT 登录。",
+	"err.login.oauthStateMismatch": "OAuth2 授权状态不匹配。",
+	"err.login.oauthStateMismatch.desc": "请重新登录，并从新打开的浏览器页面完成授权。",
+	"err.login.oauthInvalidCallback": "OAuth2 授权回调无效。",
+	"err.login.oauthInvalidCallback.desc": "请重新登录，并在浏览器中完成授权。",
+	"err.login.oauthLoopbackFailed": "无法启动本机 OAuth2 回调服务。",
+	"err.login.oauthLoopbackFailed.desc": "请检查本机 loopback 访问是否被拦截，然后重试；也可以改用 PAT 登录。",
+	"err.login.oauthTokenInvalid": "OAuth2 token 响应无效。",
+	"err.login.oauthTokenInvalid.desc": "请检查服务器版本和 OAuth2 配置，然后重试。",
 	"err.sync.conflict": "远程版本已变化：{remotePath}",
 	"err.sync.conflict.desc": "请先拉取或对比后再推送。原因：{reason}",
 	"err.sync.projectUnavailable": "无法{actionName}不可确认的远端项目：{paths}",
 	"err.sync.projectUnavailable.desc": "请先检查服务器、用户、项目权限和项目名称，再重试。",
+	"err.sync.projectUnavailable.hint": "请先运行 'succapp server project list' 查看当前登录可见的项目，再使用准确的项目名重试。",
 	"err.sync.projectNotFound": "工作区项目不存在：{projectNames}",
 	"err.sync.projectRootRenameUnsupported": "无法{actionName}被重命名的远端项目：{paths}",
 	"err.sync.projectRootRenameUnsupported.desc": "暂不支持自动应用项目重命名。请重新 clone 该项目，或在本地改名以保持一致。",
@@ -21,7 +33,7 @@
 	"err.extension.rootUnresolved.desc": "请提供扩展名，或提供扩展目录内的路径。",
 	"err.extension.rootNotFound": "扩展目录不存在：{extensionRoot}",
 	"err.workspace.problem": "检测到工作区同步问题。",
-	"err.workspace.problem.desc": "请先执行工作区检查或修复，再重试需要完整本地基线的操作。",
+	"err.workspace.problem.desc": "请先执行 'succapp workspace repair --dry-run' 或 'succapp workspace repair'，再重试需要完整本地同步基线的操作。",
 	"err.net.invalidUrl": "URL 无效：{url}",
 	"err.meta.invalidPath": "元数据路径不合法",
 	"err.meta.invalidPath.desc": "请使用合法的绝对元数据路径后重试。",
@@ -32,10 +44,29 @@
 	"err.file.notDirectory": "路径不是目录：{path}",
 	"err.workspace.sameServerUrl": "新服务器地址必须和当前地址不同。",
 	"err.workspace.serverAlreadyExists": "服务器已存在：{duplicatedServer}",
+	"err.workspace.issue.E201": "工作区配置缺失",
+	"err.workspace.issue.E202": "工作区配置不是合法 JSON",
+	"err.workspace.issue.E203": "工作区配置缺少请求的服务器",
+	"err.workspace.issue.E204": "工作区活跃服务器与请求的服务器不一致",
+	"err.workspace.issue.E205": "此工作区维护任务需要可用的活跃服务器",
+	"err.workspace.issue.E206": "工作区维护任务尚未实现",
+	"err.workspace.issue.E301": "本地同步基线资源类型与 .meta 不一致",
+	"err.workspace.issue.E302": "本地同步基线记录的资源在磁盘上缺失",
+	"err.workspace.issue.E303": "本地同步基线 .meta 缺失",
+	"err.workspace.issue.E304": "本地同步基线 .meta 无法读取",
+	"err.workspace.issue.E305": "工作区项目缺少本地同步基线",
+	"err.workspace.issue.E306": "fetch 后本地同步基线仍不完整",
+	"err.workspace.issue.E307": "当前登录无法看到当前服务器上的匹配项目",
+	"err.workspace.issue.E401": "推荐的工作区设置缺失",
+	"err.workspace.issue.E402": "SuccApp .gitignore 规则缺失",
+	"err.workspace.issue.E403": "AI agent 工作区文件缺失",
+	"err.workspace.issue.E404": "TypeScript 辅助文件缺失",
+	"err.workspace.issue.E405": "JSON Schema 辅助文件缺失",
+	"err.workspace.issue.E407": "SuccApp 官方文档 skill 文件缺失",
 	"err.lock.busy": "无法{attemptedCommand}：工作区范围 {conflictScope} 正被另一个进程持有。",
 	"err.lock.busy.desc": "请停止正在运行的进程后重试；崩溃进程留下的锁会在下次尝试时自动清理。",
 	"err.lock.compromised": "工作区锁已被另一个进程接管，当前{attemptedCommand}已中止。",
-	"err.lock.compromised.desc": "请先运行状态检查确认一致性，再重试。",
+	"err.lock.compromised.desc": "请先运行 'succapp workspace status' 确认一致性，再重试。",
 	"err.workspace.activeConnectionRequired": "当前没有可用服务器连接，无法{actionName}。",
 	"err.base.operationFailed": "操作失败",
 	"err.base.operationFailed.desc": "操作未能完成，请查看错误详情或联系管理员处理。",
@@ -45,6 +76,7 @@
 	"err.db.tableNotFound": "数据库表不存在：{tableName}",
 	"err.cli.unknownCommand": "未知命令：{commandName}",
 	"err.cli.unknownCommand.hint": "请运行 {helpCommand} 查看可用命令。",
+	"err.cli.unknownCommand.suggestion.hint": "你是不是想运行：{commands}",
 	"err.cli.invalidInvocation": "发现 {count} 个用法问题。",
 	"err.cli.invalidInvocation.hint": "请修正下面列出的用法问题后重试。",
 	"err.cli.unknownOption": "未知选项：{option}",
@@ -75,13 +107,13 @@
 	"err.cli.invalidReadableFile": "输入文件不可读取：{source}。",
 	"err.cli.invalidRegularFile": "输入路径不是普通文件：{source}。",
 	"err.cli.invalidWorkspace": "不是 SuccApp 工作区：{source}。",
-	"err.cli.invalidWorkspace.hint": "请先运行 succapp workspace init，或用 -C <workspace> 选择已有工作区。",
+	"err.cli.invalidWorkspace.hint": "请先运行 'succapp workspace init --server <url>'，或用 '-C <workspace>' 选择已有工作区。",
 	"err.cli.invalidWorkspaceConfigJson": "工作区配置已损坏：{source}。",
 	"err.cli.unconfiguredServer": "当前工作区未配置此服务器：{value}。",
 	"err.cli.serverMismatch": "服务器与当前工作区活跃服务器不一致：{value}。",
 	"err.cli.serverMismatch.hint": "期望的活跃服务器：{expected}。",
 	"err.cli.unsupportedAuthFlow": "认证流程暂未实现：{authType}。",
-	"err.cli.unsupportedAuthFlow.hint": "请使用 succapp auth login --pat <url>，按提示输入 PAT。脚本场景仍可通过管道从标准输入传入 PAT。",
+	"err.cli.unsupportedAuthFlow.hint": "请使用 'succapp auth login --pat <url>'，按提示输入 PAT。脚本场景仍可通过管道从标准输入传入 PAT。",
 	"err.cli.invalidExtensionName": "扩展名无效：{value}。",
 	"err.cli.invalidExtensionName.hint": "请使用 <公司名>-<扩展点>-<短名称> 格式。",
 	"err.cli.unknownExtensionTemplate": "扩展模板不可用：{value}。",
@@ -90,7 +122,7 @@
 	"err.cli.confirmationRequired.dbSourceDelete": "删除此数据源需要确认。",
 	"err.cli.confirmationRequired.dbSourceDelete.hint": "确认此数据源可以删除后，传入 {flag} 继续。",
 	"err.cli.confirmationRequired.dbQueryWriteSql": "db query 只执行只读 SQL。可能修改数据或表结构的 SQL 请改用 db exec。",
-	"err.cli.confirmationRequired.dbQueryWriteSql.hint": "确认 SQL 影响范围后，使用 succapp db exec 并传入 {flag} 执行。",
+	"err.cli.confirmationRequired.dbQueryWriteSql.hint": "确认 SQL 影响范围后，运行 'succapp db exec {flag}'。",
 	"err.cli.confirmationRequired.dbSqlMutation": "这段 SQL 可能修改数据或表结构，需要确认后才能执行。",
 	"err.cli.confirmationRequired.dbSqlMutation.hint": "确认 SQL 影响范围后，传入 {flag} 执行。",
 	"err.cli.confirmationRequired.outputOverwrite": "输出文件已存在，继续操作会覆盖该文件。",
@@ -100,18 +132,72 @@
 	"err.cli.confirmationRequired.cloneOverwrite.hint": "确认这些本地项目可以被覆盖后，传入 {flag} 继续。",
 	"err.cli.confirmationRequired.projRemove": "移除本地工作区项目需要确认：{projectNames}。",
 	"err.cli.confirmationRequired.projRemove.hint": "确认本地项目文件和 mirror 基线可以删除后，传入 {flag} 继续。",
+	"err.cli.confirmationRequired.discardAll": "放弃整个工作区变化需要确认。",
+	"err.cli.confirmationRequired.discardAll.hint": "确认所有本地工作区变化都可以放弃后，传入 {flag} 继续。",
 	"err.db.nonReadOnlySql": "db query 只执行只读 SQL。可能修改数据或表结构的 SQL 请改用 db exec。",
-	"err.db.nonReadOnlySql.hint": "确认 SQL 影响范围后，使用 succapp db exec 并传入 {flag} 执行。",
+	"err.db.nonReadOnlySql.hint": "确认 SQL 影响范围后，运行 'succapp db exec {flag}'。",
 	"err.net.httpStatusUnexpected": "HTTP 响应状态不符合预期",
 	"err.net.httpStatusUnexpected.desc": "远端服务返回了调用方无法归类的 HTTP 状态，请查看错误详情或联系管理员处理。",
 	"workspace.compat.connectedServerAppears": "当前连接的服务器低于此工作区记录过的版本基线，可能连接到了错误的旧服务器。",
 	"workspace.compat.serverVersion": "服务器版本：{0} < {1}",
+	"workspace.extension.progress.create.done": "已创建扩展 {0}。",
+	"workspace.extension.progress.create.running": "正在创建扩展 {0}",
+	"workspace.extension.progress.templates": "正在加载扩展模板",
+	"workspace.maintenance.progress.checkingAll": "正在检查工作区",
+	"workspace.maintenance.progress.blocked": "{0} 被阻断。",
+	"workspace.maintenance.progress.checked": "已检查 {0}。",
+	"workspace.maintenance.progress.checking": "[{1}/{2}] 正在检查 {0}",
+	"workspace.maintenance.progress.failed": "{0} 失败。",
+	"workspace.maintenance.progress.skipped": "已跳过 {0}：{1}。",
+	"workspace.maintenance.progress.skipReason": "已跳过",
+	"workspace.maintenance.progress.updated": "已更新 {0}。",
+	"workspace.maintenance.progress.updatingAll": "正在更新工作区",
+	"workspace.maintenance.progress.upToDate": "{0} 已是最新。",
+	"workspace.maintenance.agentDocs.progress.assets": "正在检查资源",
+	"workspace.maintenance.agentDocs.progress.indexes": "正在获取索引",
+	"workspace.maintenance.agentDocs.progress.markdown": "正在检查 Markdown",
+	"workspace.maintenance.agentDocs.progress.metadata": "正在写入元数据",
+	"workspace.maint.task.frontendDevelopmentSkill": "前端开发 skill",
+	"workspace.maint.task.jsonSchemaSupport": "JSON schema 支持",
+	"workspace.maint.task.succappDocsSkill": "SuccApp 官方文档 skill",
+	"workspace.maint.task.syncBaseline": "同步基线",
+	"workspace.maint.task.typescriptSupport": "TypeScript 支持",
+	"workspace.maint.task.workspaceAgentFiles": "工作区 agent 文件",
+	"workspace.maint.task.workspaceConfig": "工作区配置",
+	"workspace.maint.task.workspaceGitignore": "工作区 gitignore",
+	"workspace.maint.task.workspaceSettings": "工作区 VS Code settings",
 	"workspace.repair.baseline.invisible": "当前登录无法看到当前服务器上的匹配项目：{0}",
-	"workspace.repair.baseline.mirrorMissing": "fetch 后工作区项目镜像基线仍缺失：{0}",
-	"workspace.repair.baseline.missing": "工作区项目缺少本地镜像基线：{0}",
+	"workspace.repair.baseline.metaMissing": "本地同步基线 .meta 缺失：{0}",
+	"workspace.repair.baseline.metaUnreadable": "本地同步基线 .meta 无法读取：{0}",
+	"workspace.repair.baseline.projectMissing": "工作区项目缺少本地同步基线：{0}",
+	"workspace.repair.baseline.resourceMissing": "本地同步基线记录的资源在磁盘上缺失：{0}",
+	"workspace.repair.baseline.stillBroken": "fetch 后本地同步基线仍不完整：{0}",
+	"workspace.repair.baseline.typeMismatch": "本地同步基线资源类型与 .meta 不一致：{0}",
 	"workspace.repair.check.notImpl": "workspace 修复检查尚未实现：{0}",
 	"workspace.server.serverMirrorExists": "服务器本地基线目录已存在：{0}",
 	"workspace.server.serverNotConfigured": "此工作区未配置服务器：{0}",
+	"workspace.sync.progress.backupClear.running": "正在清理合并备份",
+	"workspace.sync.progress.backupList.running": "正在列出合并备份",
+	"workspace.sync.progress.clone.done": "已克隆 {0} 个项目。",
+	"workspace.sync.progress.clone.running": "正在克隆工作区项目",
+	"workspace.sync.progress.diff.running": "正在比较工作区文件",
+	"workspace.sync.progress.history.running": "正在加载文件历史",
+	"workspace.sync.progress.show.running": "正在读取工作区文件",
+	"workspace.sync.progress.pull.done": "已拉取远端变化：更新 {0} 项，删除 {1} 项，冲突 {2} 项。",
+	"workspace.sync.progress.pull.running": "正在拉取远端变化",
+	"workspace.sync.progress.push.done": "已推送本地变化：推送 {0} 项，拒绝 {1} 项，失败 {2} 项。",
+	"workspace.sync.progress.push.running": "正在推送本地变化",
+	"workspace.sync.progress.push.stopped": "push 在上传前停止。",
+	"workspace.sync.progress.refresh.running": "正在刷新工作区变化",
+	"workspace.sync.progress.removeProject.done": "已移除 {0} 个本地项目。",
+	"workspace.sync.progress.removeProject.running": "正在移除本地工作区项目",
+	"workspace.sync.progress.reset.done": "已丢弃本地变更：恢复 {0} 项，删除 {1} 项。",
+	"workspace.sync.progress.reset.running": "正在丢弃本地变更",
+	"workspace.sync.progress.restore.running": "正在恢复本地备份",
+	"workspace.sync.progress.upgradeMeta.apply": "正在升级元数据文件",
+	"workspace.sync.progress.upgradeMeta.checked": "已检查 {0} 个元数据文件：{1} 个可升级。",
+	"workspace.sync.progress.upgradeMeta.done": "已升级元数据文件：变更 {0} 个，失败 {1} 个，检查 {2} 个。",
+	"workspace.sync.progress.upgradeMeta.scan": "正在扫描元数据文件",
 	"workspace.validation.json.invalidJson": "JSON 格式不正确：{0}。",
 	"workspace.validation.json.jsonFileEmpty": "JSON 文件为空。",
 	"cli.cmd.common.desc": "常用命令。",
@@ -132,15 +218,17 @@
 	"cli.cmd.auth.title": "认证",
 	"cli.cmd.auth.summary": "登录、退出并查看本地服务器认证",
 	"cli.cmd.auth.desc": "登录、退出并查看本地服务器认证。",
-	"cli.cmd.auth.noStoredAuth": "没有本地认证配置：{0}",
-	"cli.cmd.auth.storedAuth": "本地认证配置：{0}：{1}",
-	"cli.cmd.auth.storedAuthNoCred": "{0} 已保存认证：没有可用凭据方式",
 	"cli.cmd.auth.login.summary": "登录服务器。",
 	"cli.cmd.auth.login.desc": "使用 OAuth2 或 PAT 登录 SuccBI 服务器并保存本地认证状态。",
 	"cli.cmd.auth.login.oauth": "使用 OAuth2 登录，这是默认方式。",
 	"cli.cmd.auth.login.pat": "使用 Personal Access Token 登录。交互终端会提示输入 token；管道输入仍从标准输入读取。",
 	"cli.cmd.auth.login.patPrompt": "个人访问令牌（PAT）：",
+	"cli.cmd.auth.login.openingBrowser": "正在打开浏览器完成 OAuth2 授权...",
+	"cli.cmd.auth.login.waitingForCallback": "正在等待 OAuth2 授权完成...",
+	"cli.cmd.auth.login.exchangingToken": "正在交换 OAuth2 授权码...",
+	"cli.cmd.auth.login.oauthManualUrl": "请在浏览器中打开此地址授权 SuccApp：{0}",
 	"cli.cmd.auth.login.loggedIn": "已登录：{0}",
+	"cli.cmd.auth.login.loggedInAs": "已登录：{0}，用户：{1}",
 	"cli.cmd.auth.logout.summary": "删除本地认证配置。",
 	"cli.cmd.auth.logout.desc": "从本地认证配置中删除已保存的认证信息。",
 	"cli.cmd.auth.logout.all": "删除所有服务器的本地认证配置。",
@@ -150,6 +238,8 @@
 	"cli.cmd.auth.logout.storedAuth": "没有本地认证配置：{0}",
 	"cli.cmd.auth.status.summary": "显示本地认证状态。",
 	"cli.cmd.auth.status.desc": "显示指定服务器的本地认证信息。",
+	"cli.cmd.auth.status.noStoredOutput": "服务器：{server}\n已保存认证：{storedAuth}",
+	"cli.cmd.auth.status.output": "服务器：{server}\n已保存认证：{storedAuth}\n认证方式：{authType}\n用户名：{username}\n用户 ID：{userId}\nToken：{token}\n刷新 Token：{refreshToken}\n过期时间：{expiresAt}\n上次登录时间：{lastLoginAt}\n更新时间：{updatedAt}",
 	"cli.cmd.db.title": "数据库",
 	"cli.cmd.db.summary": "查看和操作服务器数据库与数据源",
 	"cli.cmd.db.desc": "查看和操作服务器数据库与数据源。",
@@ -261,7 +351,7 @@
 	"cli.cmd.server.ping.summary": "检查服务器是否可达。",
 	"cli.cmd.server.ping.desc": "检查 SuccApp Dev Tool v2 ping 接口是否可达。",
 	"cli.cmd.server.info.summary": "显示服务器信息。",
-	"cli.cmd.server.info.desc": "显示服务器信息和 Dev Tool 能力。",
+	"cli.cmd.server.info.desc": "显示服务器信息和元数据版本。",
 	"cli.cmd.server.cache.title": "服务器缓存",
 	"cli.cmd.server.cache.summary": "管理服务器缓存",
 	"cli.cmd.server.cache.desc": "管理服务器缓存。",
@@ -353,33 +443,49 @@
 	"cli.cmd.server.script.exec.param": "传入脚本参数，可重复。",
 	"cli.cmd.server.script.check.summary": "在服务器上检查本地脚本。",
 	"cli.cmd.server.script.check.desc": "读取本地脚本文件，并在服务器支持时通过 Dev Tool v2 编译。",
+	"cli.cmd.server.settings.title": "服务器设置",
+	"cli.cmd.server.settings.summary": "获取和设置服务器设置",
+	"cli.cmd.server.settings.desc": "通过 Dev Tool v2 获取和设置系统、项目或应用级设置。",
+	"cli.cmd.server.settings.target.system": "系统级",
+	"cli.cmd.server.settings.get.summary": "获取服务器设置。",
+	"cli.cmd.server.settings.get.desc": "读取系统、项目或应用级设置。省略 <target> 或传 system 读取系统级设置。",
+	"cli.cmd.server.settings.get.key": "只返回指定的一级 key，可重复。",
+	"cli.cmd.server.settings.get.header": "{0} 的设置：",
+	"cli.cmd.server.settings.set.summary": "设置服务器设置。",
+	"cli.cmd.server.settings.set.desc": "把增量设置合并到系统、项目或应用级设置。至少提供 --set、--file、--stdin 或 --unset 之一。",
+	"cli.cmd.server.settings.set.set": "内联增量 JSON，可一次设置多个顶层 key。",
+	"cli.cmd.server.settings.set.file": "从本地文件读取增量 JSON。",
+	"cli.cmd.server.settings.set.stdin": "从标准输入读取增量 JSON。",
+	"cli.cmd.server.settings.set.unset": "删除指定的一级 key，可重复。",
+	"cli.cmd.server.settings.set.key": "只在指定的一级 key 下合并。",
+	"cli.cmd.server.settings.set.expectedRevision": "仅当服务器设置版本仍匹配时写入。",
+	"cli.cmd.server.settings.set.success": "已更新 {0} 的设置：{1}",
+	"cli.cmd.server.settings.set.noKeys": "（无 key）",
 	"cli.cmd.workspace.title": "工作区",
 	"cli.cmd.workspace.summary": "使用本地 SuccApp 工作区",
 	"cli.cmd.workspace.desc": "使用本地 SuccApp 工作区。",
 	"cli.cmd.workspace.init.summary": "初始化 SuccApp 工作区。",
-	"cli.cmd.workspace.init.desc": "在目标工作区目录初始化 .succapp/config.json。",
+	"cli.cmd.workspace.init.desc": "初始化 .succapp/config.json、推荐的工作区辅助文件和可选的 SuccApp 官方离线文档 skill。",
 	"cli.cmd.workspace.init.server": "使用该活跃服务器初始化工作区。",
-	"cli.cmd.workspace.init.setup": "初始化后应用推荐的工作区辅助文件。",
+	"cli.cmd.workspace.init.scope": "限制初始化范围。可选值：base、dev、agent-docs、all。",
+	"cli.cmd.workspace.init.force": "即使索引未变化，也强制 SuccApp 官方离线文档 skill 检查本地文件。",
 	"cli.cmd.workspace.init.active": "活跃服务器：{0}",
-	"cli.cmd.workspace.init.alreadyActive": "工作区已使用活跃服务器初始化：{0}。请使用 workspace remote add 或 workspace remote use 切换服务器。",
+	"cli.cmd.workspace.init.agentDocsSummary": "SuccApp 官方文档 skill：共 {0} 个文件，新增 {1}，更新 {2}，删除 {3}，未变 {4}。",
+	"cli.cmd.workspace.init.agentDocsFileSkipped": "SuccApp 官方文档 skill：已跳过 {0} 个 Markdown 文件，详情见日志。",
+	"cli.cmd.workspace.init.agentDocsResourceSkipped": "SuccApp 官方文档 skill：已跳过 {0} 个链接资源，详情见日志。",
+	"cli.cmd.workspace.init.agentDocsUnavailable": "SuccApp 官方文档 skill：文档索引不可访问，已跳过。可通过 SUCCAPP_DOCS_BASE_URL 指向本地或测试文档站；离线交付时也可从交付包或团队仓库复制 .agents/skills/succapp-docs/。",
+	"cli.cmd.workspace.init.alreadyActive": "工作区已使用活跃服务器初始化：{0}。请使用 'succapp workspace remote add <url>' 或 'succapp workspace remote use <url>' 切换服务器。",
 	"cli.cmd.workspace.init.configBad": "工作区配置已损坏：{0}",
 	"cli.cmd.workspace.init.initWorkspace": "已初始化工作区：{0}",
-	"cli.cmd.workspace.init.supportFiles": "已应用工作区辅助文件。",
+	"cli.cmd.workspace.init.nextConfigureServer": "下一步：执行 'succapp workspace init --server <url>' 或 'succapp workspace remote add <url>'。",
+	"cli.cmd.workspace.init.noActiveServer": "尚未配置活跃服务器。",
+	"cli.cmd.workspace.init.supportFiles": "工作区辅助文件：已更新 {0} 项，已跳过 {1} 项。",
 	"cli.cmd.workspace.init.workspaceInit": "工作区已初始化：{0}",
-	"cli.cmd.workspace.setup.summary": "应用推荐的工作区支持文件。",
-	"cli.cmd.workspace.setup.desc": "应用 SuccApp 推荐设置、TypeScript 支持、JSON Schema 支持和 agent 文件。",
-	"cli.cmd.workspace.setup.dryRun": "预览设置计划，不修改文件。",
-	"cli.cmd.workspace.setup.clean": "工作区设置：无需变更。",
-	"cli.cmd.workspace.setup.dry": "工作区设置试运行：待处理 {0}，已是最新 {1}，已跳过 {2}。",
-	"cli.cmd.workspace.setup.updated": "工作区设置：已更新 {0} 项，{1} 个确认请求。",
-	"cli.cmd.workspace.check.summary": "检查工作区一致性。",
-	"cli.cmd.workspace.check.desc": "检查工作区结构和同步状态，不修改文件。",
-	"cli.cmd.workspace.check.only": "只运行指定的工作区检查项。",
 	"cli.cmd.workspace.status.summary": "显示工作区同步状态。",
 	"cli.cmd.workspace.status.desc": "显示工作区同步状态。",
 	"cli.cmd.workspace.status.forceRefresh": "重新检查服务器变化，不使用本地缓存的状态。",
 	"cli.cmd.workspace.status.localOnly": "只显示本地工作区变化，不检查服务器。",
-	"cli.cmd.workspace.status.remoteAuthRequired": "当前未登录，已只显示本地变化。请先执行 `succapp auth login`，再重试查看服务器变化。",
+	"cli.cmd.workspace.status.remoteAuthRequired": "当前未登录，已只显示本地变化。请先执行 'succapp auth login'，再重试查看服务器变化。",
 	"cli.cmd.workspace.upgrade.summary": "规划工作区结构迁移。",
 	"cli.cmd.workspace.upgrade.desc": "规划 SuccApp 工作区结构迁移。当前实现没有迁移项。",
 	"cli.cmd.workspace.upgrade.targetVersion": "规划到目标工作区结构版本的迁移。",
@@ -405,17 +511,23 @@
 	"cli.cmd.workspace.push.pushResultPushed": "推送结果：已推送 {0}，被拒绝 {1}，失败 {2}",
 	"cli.cmd.workspace.push.targetVersion": "目标版本",
 	"cli.cmd.workspace.push.version": "当前版本",
-	"cli.cmd.workspace.repair.summary": "修复工作区一致性问题。",
-	"cli.cmd.workspace.repair.desc": "修复可自动处理的工作区结构和同步状态问题。",
-	"cli.cmd.workspace.repair.only": "只修复指定工作区检查项发现的问题。",
-	"cli.cmd.workspace.repair.dryRun": "预览修复计划，不修改文件。",
-	"cli.cmd.workspace.repair.badCheck": "工作区检查项无效：{0}",
-	"cli.cmd.workspace.repair.check": "检查项",
-	"cli.cmd.workspace.repair.checkClean": "工作区检查：未发现问题。",
-	"cli.cmd.workspace.repair.checkIssue": "工作区检查：发现 {0} 个问题，其中 {1} 个可修复。",
+	"cli.cmd.workspace.discard.summary": "放弃工作区本地变化。",
+	"cli.cmd.workspace.discard.desc": "用本地 mirror 基线恢复工作区文件，并放弃本地变化。",
+	"cli.cmd.workspace.discard.force": "不指定路径时，确认放弃整个工作区的本地变化。",
+	"cli.cmd.workspace.discard.deletedFiles": "已删除文件：{0}",
+	"cli.cmd.workspace.discard.noLocalChanges": "没有本地变更需要放弃",
+	"cli.cmd.workspace.discard.restoredFiles": "已恢复文件：{0}",
+	"cli.cmd.workspace.discard.result": "放弃结果：已恢复 {0}，已删除 {1}",
+	"cli.cmd.workspace.repair.summary": "检查或修复工作区一致性问题。",
+	"cli.cmd.workspace.repair.desc": "检查或修复可自动处理的工作区结构和同步状态问题。",
+	"cli.cmd.workspace.repair.only": "只运行指定的工作区修复检查项。",
+	"cli.cmd.workspace.repair.dryRun": "预演可修复的工作区问题，不修改文件。",
+	"cli.cmd.workspace.repair.badCheck": "工作区修复检查项无效：{0}",
+	"cli.cmd.workspace.repair.checkColumn": "检查项",
+	"cli.cmd.workspace.repair.codeColumn": "错误码",
+	"cli.cmd.workspace.repair.dryRunClean": "工作区修复 dry-run：未发现问题。",
+	"cli.cmd.workspace.repair.dryRunIssue": "工作区修复 dry-run：发现 {0} 个问题，{1} 个可修复，{2} 个不可修复。",
 	"cli.cmd.workspace.repair.clean": "工作区修复：无需修改。",
-	"cli.cmd.workspace.repair.dryRunClean": "工作区修复预览：无需修改。",
-	"cli.cmd.workspace.repair.dryRunIssues": "工作区修复预览：发现 {0} 个问题，{1} 个可修复，{2} 个不可修复。",
 	"cli.cmd.workspace.repair.remotePaths": "远端路径",
 	"cli.cmd.workspace.repair.repairable": "可修复",
 	"cli.cmd.workspace.repair.repaired": "工作区修复：已修复 {0} 个，未解决 {1} 个。",
@@ -430,9 +542,9 @@
 	"cli.cmd.workspace.proj.clone.summary": "克隆服务器项目到工作区。",
 	"cli.cmd.workspace.proj.clone.desc": "从活跃服务器克隆项目到当前工作区。",
 	"cli.cmd.workspace.proj.clone.force": "允许 clone 覆盖已有本地工作区项目。",
+	"cli.cmd.workspace.proj.clone.configuredActive": "已配置活跃服务器：{0}",
 	"cli.cmd.workspace.proj.clone.cloned": "已克隆项目：{0}",
-	"cli.cmd.workspace.proj.clone.oldMeta": "旧版元数据文件：{0}",
-	"cli.cmd.workspace.proj.clone.upgradeCommand": "升级命令：{0}",
+	"cli.cmd.workspace.proj.clone.oldMetaNotice": "注意：{count} 个元数据文件使用较旧格式。\n可选：执行 '{command}' 可将它们升级为新版格式。\n这可能会更新很多文件；如需确认影响范围，可先加 `--dry-run` 预演。\n如果只是查看项目，可以先跳过这一步。",
 	"cli.cmd.workspace.proj.remove.summary": "移除工作区项目。",
 	"cli.cmd.workspace.proj.remove.desc": "移除本地工作区项目和 mirror 基线，不删除服务器项目。",
 	"cli.cmd.workspace.proj.remove.force": "确认删除本地项目文件和 mirror 基线。",
@@ -487,18 +599,14 @@
 	"cli.cmd.workspace.file.history.desc": "显示当前工作区文件的服务器端历史。",
 	"cli.cmd.workspace.file.history.limit": "限制历史记录返回条数。",
 	"cli.cmd.workspace.file.upgrade.summary": "升级旧版 SuccApp 元数据文件。",
-	"cli.cmd.workspace.file.upgrade.desc": "检查或升级本地工作区项目中的旧版 SuccApp 元数据文件。不指定路径时处理所有本地项目。",
-	"cli.cmd.workspace.file.upgrade.check": "只检查升级候选文件，不修改文件。",
+	"cli.cmd.workspace.file.upgrade.desc": "预演或升级本地工作区项目中的旧版 SuccApp 元数据文件。不指定路径时处理所有本地项目。",
+	"cli.cmd.workspace.file.upgrade.dryRun": "预演升级候选文件，不修改文件。",
 	"cli.cmd.workspace.file.upgrade.cands": "升级候选文件：{0}",
-	"cli.cmd.workspace.file.upgrade.checkRes": "元数据升级检查：已检查 {0}，候选 {1}，跳过 {2}，失败 {3}",
+	"cli.cmd.workspace.file.upgrade.dryRunRes": "元数据升级 dry-run：已检查 {0}，候选 {1}，跳过 {2}，失败 {3}",
 	"cli.cmd.workspace.file.upgrade.failed": "失败文件：{0}",
-	"cli.cmd.workspace.file.upgrade.itemFailed": "[{0}/{1}] 失败 {2}：{3}",
-	"cli.cmd.workspace.file.upgrade.itemSkipped": "[{0}/{1}] 跳过 {2}：{3}",
-	"cli.cmd.workspace.file.upgrade.itemUpgraded": "[{0}/{1}] 已升级 {2}",
-	"cli.cmd.workspace.file.upgrade.noCands": "没有需要升级的元数据文件。",
 	"cli.cmd.workspace.file.upgrade.reason": "原因",
 	"cli.cmd.workspace.file.upgrade.result": "元数据升级结果：已检查 {0}，已更新 {1}，跳过 {2}，失败 {3}",
-	"cli.cmd.workspace.file.upgrade.upgradeStart": "开始升级元数据文件...",
+	"cli.cmd.workspace.file.upgrade.skipped": "跳过文件：{0}",
 	"cli.cmd.workspace.file.upgrade.upgraded": "已升级文件：{0}",
 	"cli.cmd.workspace.lock.title": "工作区锁",
 	"cli.cmd.workspace.lock.summary": "查看工作区锁",
@@ -550,13 +658,17 @@
 	"cli.out.common.active": "活跃",
 	"cli.out.common.api": "Dev Tool 接口",
 	"cli.out.common.baseline": "基线",
-	"cli.out.common.capabilities": "能力",
 	"cli.out.common.changes": "没有变更。",
 	"cli.out.common.changesLocalRemote": "变更：{0}（本地 {1}，远端 {2}，冲突 {3}）",
 	"cli.out.common.id": "ID",
+	"cli.out.common.jvmInfo": "JVM 属性",
+	"cli.out.common.metaVersions": "元数据版本",
 	"cli.out.common.noServers": "尚未配置任何服务器。",
 	"cli.out.common.product": "产品",
+	"cli.out.common.productInfo": "产品信息",
 	"cli.out.common.server": "服务器",
+	"cli.out.common.sysInspectInfo": "系统诊断",
+	"cli.out.common.systemEnvirInfo": "环境变量",
 	"cli.out.common.targetVersion": "目标版本",
 	"cli.out.common.version": "当前版本",
 	"cli.out.common.workspace": "工作区",
@@ -572,7 +684,9 @@
 	"cli.out.header.extra": "额外信息",
 	"cli.out.header.field": "字段",
 	"cli.out.header.key": "键",
+	"cli.out.header.latestVersion": "最新版本",
 	"cli.out.header.message": "说明",
+	"cli.out.header.metaType": "元数据类型",
 	"cli.out.header.modified": "已修改",
 	"cli.out.header.modifier": "修改者",
 	"cli.out.header.null": "可空",
@@ -586,6 +700,7 @@
 	"cli.out.header.status": "状态",
 	"cli.out.header.table": "表",
 	"cli.out.header.type": "类型",
+	"cli.out.header.upgrade": "支持升级",
 	"cli.out.header.value": "值",
 	"cli.out.header.version": "版本",
 	"cli.out.help.commandHelpRead": "运行 'succapp {0} <command> --help' 查看具体命令帮助。",
@@ -640,11 +755,13 @@
 	"cli.err.context.exampleUrl": "传入 <url>",
 	"cli.err.context.text": "设置 {envName}",
 	"cli.err.context.workspaceRemoteAdd": "succapp workspace remote add <url>",
+	"cli.err.context.sourceListPair": "{first} 或 {second}",
+	"cli.err.context.sourceListMany": "{head} 或 {tail}",
+	"cli.err.context.sourceListSeparator": "、",
 	"cli.input.accessKeyId": "访问密钥 ID",
 	"cli.input.accessKeySecret": "访问密钥 Secret",
 	"cli.input.activeServer": "活跃服务器",
 	"cli.input.contentSource": "内容来源",
-	"cli.input.credentialType": "凭证类型",
 	"cli.input.dataSourceConfig": "数据源配置",
 	"cli.input.exportTarget": "导出目标",
 	"cli.input.extensionName": "扩展名",
@@ -657,6 +774,8 @@
 	"cli.input.projectName": "项目名",
 	"cli.input.server": "服务器",
 	"cli.input.serverFilePath": "服务器文件路径",
+	"cli.input.settingsPatch": "设置增量",
+	"cli.input.settingsTarget": "设置目标",
 	"cli.input.sql": "SQL 语句",
 	"cli.input.token": "令牌",
 	"cli.input.user": "用户",
@@ -664,10 +783,9 @@
 	"cli.input.workspace": "工作区",
 	"cli.input.workspaceConfig": "工作区配置",
 	"cli.input.revisionOrForce": "版本号或 --force",
-	"vs.cmd.config.apply.applied": "已应用 SuccApp 工作区配置。",
-	"vs.cmd.config.apply.succAppExisting": "检测到已有 TypeScript 诊断辅助文件。是否使用推荐配置更新？",
-	"vs.cmd.config.apply.update": "更新",
-	"vs.cmd.config.apply.upToDate": "SuccApp 工作区配置已是最新。",
+	"vs.cmd.workspace.init.done": "已初始化 SuccApp 工作区，更新 {0} 项。",
+	"vs.cmd.workspace.init.partial": "已初始化 SuccApp 工作区，更新 {0} 项，跳过或阻断 {1} 项。",
+	"vs.cmd.workspace.init.upToDate": "SuccApp 工作区已初始化。",
 	"vs.cmd.misc.copyMeta.fileHaveMeta": "此文件没有元数据 ID。",
 	"vs.cmd.misc.history.changeHaveRemote": "此变更没有可查看的服务器文件历史。",
 	"vs.cmd.misc.history.fileHaveRemote": "此文件没有远端元数据记录。",
@@ -720,7 +838,6 @@
 	"vs.cmd.sync.clone.clone": "克隆",
 	"vs.cmd.sync.clone.cloned": "已克隆",
 	"vs.cmd.sync.clone.cloneProject": "克隆项目 {0}？",
-	"vs.cmd.sync.clone.cloningProjectS": "正在克隆 {0} 个项目...",
 	"vs.cmd.sync.clone.complete": "克隆完成：{0} 个项目。",
 	"vs.cmd.sync.clone.completeOldMeta": "克隆完成：{0} 个项目，{1} 个旧版元数据文件。请先升级再编辑。",
 	"vs.cmd.sync.clone.noWorkspace": "目标工作区不存在：{0}",
@@ -744,13 +861,11 @@
 	"vs.cmd.sync.discard.moreFiles": "... 以及另外 {0} 个文件",
 	"vs.cmd.sync.discard.overwriteFiles": "以下本地文件将被覆盖或删除：\n{0}",
 	"vs.cmd.sync.discard.overwriteWorkspaces": "这会覆盖或删除以下工作区中的本地文件：\n{0}",
-	"vs.cmd.sync.discard.progress": "正在放弃变化...",
 	"vs.cmd.sync.discard.prompt": "丢弃本地变更？",
 	"vs.cmd.sync.discard.selectFiles": "请从 Changes 视图选择一个或多个文件。",
 	"vs.cmd.sync.pull.changePulled": "此变更未拉取。",
 	"vs.cmd.sync.pull.mayOverwriteLocal": "以下本地修改可能被覆盖：\n{0}",
 	"vs.cmd.sync.pull.moreFiles": "... 以及另外 {0} 个文件",
-	"vs.cmd.sync.pull.progress": "正在拉取...",
 	"vs.cmd.sync.pull.pullServerVersion": "拉取所选文件的服务器版本？",
 	"vs.cmd.sync.pull.selectFiles": "请从 Changes 视图选择一个或多个文件。",
 	"vs.cmd.sync.push.addedRemotely": "已在远端新增",
@@ -770,7 +885,6 @@
 	"vs.cmd.sync.push.newMetaVersions": "{0} 个已推送元数据文件使用比当前服务器更新的内容版本。请确认兼容性。",
 	"vs.cmd.sync.push.noLocalChanges": "没有本地变更需要推送",
 	"vs.cmd.sync.push.oldMetaVersions": "{0} 个已推送元数据文件使用较旧内容版本，建议升级。",
-	"vs.cmd.sync.push.progress": "正在推送...",
 	"vs.cmd.sync.push.pushedBlockedFailed": "已推送 {0} 个，阻断 {1} 个，失败 {2} 个",
 	"vs.cmd.sync.push.pushFileS": "确认推送 {0} 个文件到服务器？",
 	"vs.cmd.sync.push.renamedOrMoved": "已在远端重命名或移动",
@@ -778,36 +892,29 @@
 	"vs.cmd.sync.push.serverHasNewer": "服务器上有更新的变化。请回到 Changes 视图或命令面板拉取或对比后再推送。",
 	"vs.cmd.sync.push.showLogs": "查看日志",
 	"vs.cmd.sync.push.successPushedFile": "成功推送 {0} 个文件",
-	"vs.cmd.sync.refresh.progress": "正在刷新变化...",
 	"vs.cmd.sync.removeProject.confirm": "移除本地项目？",
 	"vs.cmd.sync.removeProject.empty": "没有可移除的本地项目",
 	"vs.cmd.sync.removeProject.localProjectS": "已移除 {0} 个本地项目",
-	"vs.cmd.sync.removeProject.progress": "正在移除 {0} 个本地项目...",
 	"vs.cmd.sync.removeProject.projectSWill": "这些项目只会从 workspace 和本地 mirror 副本中移除，不会删除服务器项目：\n{0}",
 	"vs.cmd.sync.removeProject.select": "选择要移除的本地项目",
 	"vs.cmd.sync.removeProject.selectProject": "选择项目",
 	"vs.cmd.sync.repair.cannotRepairWorkspace": "连接服务器前无法修复工作区。请连接或重新登录服务器后再次运行 Repair Workspace。",
-	"vs.cmd.sync.repair.checking": "正在检查工作区",
 	"vs.cmd.sync.repair.complete": "工作区修复完成：已修复 {0} 个问题。",
 	"vs.cmd.sync.repair.completeClean": "工作区修复完成：无需变更。",
-	"vs.cmd.sync.repair.fetched": "工作区修复已从当前服务器拉取，但本地基线仍缺失。详见日志。",
+	"vs.cmd.sync.repair.fetched": "工作区修复已从当前服务器拉取，但本地同步基线仍不完整。详见日志。",
 	"vs.cmd.sync.repair.finished": "工作区修复结束：已修复 {0}，未解决 {1}。详见日志。",
 	"vs.cmd.sync.repair.ifServerConnected": "如果服务器未连接，请先连接或重新登录，再重新修复。",
 	"vs.cmd.sync.repair.moreFiles": "... 以及另外 {0} 个问题。",
-	"vs.cmd.sync.repair.progress": "正在修复工作区",
-	"vs.cmd.sync.repair.repairRefreshesLocal": "当前修复只刷新本地镜像基线，不会覆盖工作区文件。",
+	"vs.cmd.sync.repair.repairRefreshesLocal": "当前修复只刷新本地同步基线，不会覆盖工作区文件。",
 	"vs.cmd.sync.repair.repairWorkspace": "修复工作区",
 	"vs.cmd.sync.repair.repairWorkspaceIssue": "修复 {0} 个工作区问题？",
 	"vs.cmd.sync.repair.showLogs": "查看日志",
-	"vs.cmd.sync.repair.workspaceFsckComplete": "工作区检查完成：未发现问题。",
-	"vs.cmd.sync.repair.workspaceFsckIssue": "工作区检查发现 {0} 个问题。详见日志。",
+	"vs.cmd.sync.repair.workspaceCheckComplete": "工作区修复检查完成：未发现问题。",
 	"vs.cmd.sync.resetProject.confirm": "从服务器重置本地项目？",
 	"vs.cmd.sync.resetProject.empty": "没有可重置的本地项目",
 	"vs.cmd.sync.resetProject.noWorkspace": "目标工作区不存在：{0}",
 	"vs.cmd.sync.resetProject.overwriteDetail": "这些项目里的所有本地修改都会被覆盖，服务器上不存在的本地文件也可能被删除：\n{0}",
-	"vs.cmd.sync.resetProject.progress": "正在重置 {0} 个项目...",
 	"vs.cmd.sync.resetProject.resetProject": "重置项目",
-	"vs.cmd.sync.upgradeMeta.action": "升级元数据",
 	"vs.cmd.sync.upgradeMeta.done": "元数据已在本地 workspace 中升级，远端服务器数据未被修改。",
 	"vs.cmd.sync.upgradeMeta.empty": "没有找到可升级的元数据文件。",
 	"vs.cmd.sync.upgradeMeta.failed": "元数据升级失败：{0}",
@@ -818,12 +925,10 @@
 	"vs.cmd.sync.upgradeMeta.metaUpDate": "元数据已是最新。",
 	"vs.cmd.sync.upgradeMeta.noFile": "没有可升级的当前文件。",
 	"vs.cmd.sync.upgradeMeta.result": "元数据升级完成：已变更 {0} 个，已检查 {1} 个。",
-	"vs.cmd.sync.upgradeMeta.scan": "扫描元数据文件",
 	"vs.cmd.sync.upgradeMeta.upgrade": "升级",
 	"vs.cmd.sync.upgradeMeta.upgradeMetaFile": "升级此文件夹下的 {0} 个元数据文件？",
 	"vs.cmd.ext.create.cannotCreateExt": "无法新建扩展，因为当前工作区尚未 clone sysdata 项目。",
 	"vs.cmd.ext.create.createdExt": "已创建扩展 {0}。",
-	"vs.cmd.ext.create.creatingExt": "正在创建扩展 {0}",
 	"vs.cmd.ext.create.dirNamedSame": "sysdata/extensions/ 下已存在同名目录。",
 	"vs.cmd.ext.create.enterNewExt": "输入新扩展名称",
 	"vs.cmd.ext.create.extNameMust": "扩展名必须符合模式 {0}。",
@@ -840,7 +945,6 @@
 	"vs.cmd.ext.push.pickExtDir": "选择要推送到服务器的扩展目录",
 	"vs.cmd.ext.push.pushExtComplete": "扩展推送完成：已推送 {0}。",
 	"vs.cmd.ext.push.pushExtFinished": "扩展推送完成但存在问题：已推送 {0}，被拒绝 {1}，失败 {2}。",
-	"vs.cmd.ext.push.pushingExt": "正在推送扩展 {0}",
 	"vs.cmd.ext.push.selectExtPush": "选择要推送的扩展",
 	"vs.view.changes.backup": "未找到 {0} 的本地备份",
 	"vs.view.changes.localAdded": "本地新增",
@@ -857,7 +961,6 @@
 	"vs.view.changes.openFile": "打开文件",
 	"vs.view.changes.path": "路径：{0}",
 	"vs.view.changes.previousPath": "原路径：{0}",
-	"vs.view.changes.refreshingChanges": "正在刷新变化...",
 	"vs.view.changes.remoteAdded": "远端新增",
 	"vs.view.changes.remoteChanges": "远程修改",
 	"vs.view.changes.remoteDeleted": "远端删除",
@@ -907,7 +1010,15 @@
 	"vs.ui.error.showLogs": "查看日志",
 	"vs.ui.error.unknownErrorOccurred": "发生未知错误",
 	"vs.ui.login.login": "登录 {0}",
+	"vs.ui.login.method": "选择登录方式",
+	"vs.ui.login.oauth": "OAuth2 授权",
+	"vs.ui.login.oauthDesc": "打开浏览器授权 SuccApp。",
+	"vs.ui.login.openingBrowser": "正在打开浏览器",
+	"vs.ui.login.waitingForCallback": "正在等待授权",
+	"vs.ui.login.exchangingToken": "正在登录",
+	"vs.ui.login.oauthManualUrl": "请在浏览器中打开此地址：{0}",
 	"vs.ui.login.pat": "个人访问令牌（PAT）",
+	"vs.ui.login.patDesc": "手动粘贴 PAT。",
 	"vs.ui.login.patRequired": "请输入个人访问令牌（PAT）。",
 	"vs.ui.remote.remoteServerFiles": "Servers 视图中的远程服务器文件为只读。请使用同步命令编辑本地工作区文件。",
 	"vs.ui.status.clickReconnectOr": "点击重新连接或切换服务器",
@@ -929,59 +1040,58 @@
 	"vs.ui.workspaceProblem.staleBaseline": "SuccApp 检测到本地同步基线过旧。修改工作区前请查看日志详情。",
 	"vs.ui.workspaceProblem.syncProblem": "SuccApp 检测到工作区同步问题。详见日志。",
 	"vs.cmd.title.addServer": "添加服务器",
-	"vs.cmd.title.switchServer": "切换服务器",
-	"vs.cmd.title.relogin": "重新登录",
+	"vs.cmd.title.useServer": "使用服务器",
+	"vs.cmd.title.loginServer": "登录服务器",
 	"vs.cmd.title.disconnectServer": "断开服务器连接",
-	"vs.cmd.title.removeServer": "删除服务器",
-	"vs.cmd.title.changeServerUrl": "修改服务器地址",
+	"vs.cmd.title.removeServer": "移除服务器",
+	"vs.cmd.title.setServerUrl": "设置服务器地址",
 	"vs.cmd.title.openServerConfig": "打开服务器配置",
 	"vs.cmd.title.cloneProject": "克隆项目",
-	"vs.cmd.title.removeProject": "移除本地项目",
+	"vs.cmd.title.removeLocalProject": "移除本地项目",
 	"vs.cmd.title.pullChanges": "拉取变化",
 	"vs.cmd.title.pushChanges": "推送变化",
 	"vs.cmd.title.pushCurrentFile": "推送当前文件",
-	"vs.cmd.title.meta.upgradeFile": "升级元数据文件",
-	"vs.cmd.title.refreshSyncStatus": "重新扫描同步变化",
-	"vs.cmd.title.workspace.fsck": "检查工作区同步状态",
-	"vs.cmd.title.workspace.repair": "修复工作区同步状态",
+	"vs.cmd.title.upgradeFile": "升级文件",
+	"vs.cmd.title.refreshChanges": "刷新变化",
+	"vs.cmd.title.repairWorkspace": "修复工作区",
 	"vs.cmd.title.enableAutoPush": "开启自动推送",
 	"vs.cmd.title.disableAutoPush": "关闭自动推送",
-	"vs.cmd.title.diffWithRemote": "与服务器版本对比",
+	"vs.cmd.title.compareFileWithServer": "与服务器版本对比",
 	"vs.cmd.title.configureSyncIgnore": "配置同步忽略规则",
-	"vs.cmd.title.applyWorkspaceConfiguration": "应用工作区配置",
+	"vs.cmd.title.initWorkspace": "初始化工作区",
 	"vs.cmd.title.showLogs": "查看日志",
 	"vs.cmd.title.createExtension": "从模板新建扩展",
-	"vs.cmd.title.pushExtension": "推送扩展到服务器",
-	"vs.cmd.title.pushFile": "推送到服务器",
-	"vs.cmd.title.pullFile": "从服务器拉取",
-	"vs.cmd.title.discardChanges": "放弃本地修改",
-	"vs.cmd.title.copyMetaPath": "复制元数据路径",
-	"vs.cmd.title.copyMetaId": "复制元数据 ID",
-	"vs.cmd.title.openRemoteView": "打开服务器页面",
-	"vs.cmd.title.openRemoteEdit": "打开服务器编辑页",
+	"vs.cmd.title.pushExtension": "推送扩展",
+	"vs.cmd.title.pushFile": "推送文件",
+	"vs.cmd.title.pullFile": "拉取文件",
+	"vs.cmd.title.discardChanges": "放弃修改",
+	"vs.cmd.title.copyMetaPath": "复制 Meta 路径",
+	"vs.cmd.title.copyMetaId": "复制 Meta ID",
+	"vs.cmd.title.openServerViews": "打开服务器视图",
+	"vs.cmd.title.openServerEditPage": "打开服务器编辑页",
 	"vs.cmd.title.views.refreshServers": "刷新服务器",
 	"vs.cmd.title.views.refreshChanges": "刷新变化",
 	"vs.cmd.title.views.pushChanges": "推送变化",
 	"vs.cmd.title.views.pullChanges": "拉取变化",
-	"vs.cmd.title.views.discardChanges": "放弃本地修改",
+	"vs.cmd.title.views.discardChanges": "放弃修改",
 	"vs.cmd.title.views.toggleChangesViewMode": "切换树/列表视图",
 	"vs.cmd.title.views.connectServer": "连接服务器",
-	"vs.cmd.title.views.removeServer": "删除服务器",
-	"vs.cmd.title.views.changeServerUrl": "修改服务器地址",
+	"vs.cmd.title.views.removeServer": "移除服务器",
+	"vs.cmd.title.views.setServerUrl": "设置服务器地址",
 	"vs.cmd.title.views.cloneProject": "克隆项目",
-	"vs.cmd.title.views.openRemoteFile": "打开服务器源码",
-	"vs.cmd.title.views.loadFileHistory": "加载文件历史",
-	"vs.cmd.title.views.refreshFileHistory": "刷新文件历史",
+	"vs.cmd.title.views.openServerSource": "打开服务器源码",
+	"vs.cmd.title.views.loadServerFileHistory": "加载服务器文件历史",
+	"vs.cmd.title.views.refreshServerFileHistory": "刷新服务器文件历史",
 	"vs.cmd.title.views.compareHistoryWithPrevious": "与上一版本对比",
 	"vs.cmd.title.views.compareHistoryWithWorkspace": "与工作区文件对比",
-	"vs.cmd.title.views.diffChange": "打开文件",
-	"vs.cmd.title.views.pushChange": "推送到服务器",
-	"vs.cmd.title.views.pullChange": "从服务器拉取",
-	"vs.cmd.title.views.discardChange": "放弃本地修改",
+	"vs.cmd.title.views.compareFileWithServer": "与服务器版本对比",
+	"vs.cmd.title.views.pushFile": "推送文件",
+	"vs.cmd.title.views.pullFile": "拉取文件",
+	"vs.cmd.title.views.discardChange": "放弃修改",
 	"vs.cmd.title.views.mergeChange": "合并修改",
-	"vs.cmd.title.views.acceptRemoteChange": "采用服务器版本",
+	"vs.cmd.title.views.acceptServerChange": "采用服务器版本",
 	"vs.cmd.title.views.restoreLocalChange": "恢复本地版本",
 	"vs.cmd.title.openServerSource": "打开服务器源码",
-	"vs.cmd.title.showServerHistory": "查看服务器修改历史",
+	"vs.cmd.title.showServerFileHistory": "查看服务器文件历史",
 	"vs.cmd.title.views.resetProjectFromServer": "从服务器重置本地项目"
 }