@splitsoftware/splitio-commons 2.4.2-rc.3 → 11.5.0-rc.0

package/cjs/utils/constants/index.js

@@ -1,100 +0,0 @@
-"use strict";
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.MEMBERSHIPS = exports.SEGMENT = exports.TOKEN = exports.TELEMETRY = exports.EVENTS = exports.IMPRESSIONS_COUNT = exports.IMPRESSIONS = exports.SPLITS = exports.NONE_ENUM = exports.DEBUG_ENUM = exports.OPTIMIZED_ENUM = exports.CONSUMER_PARTIAL_ENUM = exports.CONSUMER_ENUM = exports.STANDALONE_ENUM = exports.DEDUPED = exports.DROPPED = exports.QUEUED = exports.NAMES_FN_LABEL = exports.SPLITS_FN_LABEL = exports.SPLIT_FN_LABEL = exports.TRACK_FN_LABEL = exports.GET_TREATMENTS_WITH_CONFIG_BY_FLAG_SETS = exports.GET_TREATMENTS_WITH_CONFIG_BY_FLAG_SET = exports.GET_TREATMENTS_BY_FLAG_SETS = exports.GET_TREATMENTS_BY_FLAG_SET = exports.GET_TREATMENTS_WITH_CONFIG = exports.GET_TREATMENT_WITH_CONFIG = exports.GET_TREATMENTS = exports.GET_TREATMENT = exports.CONSENT_UNKNOWN = exports.CONSENT_DECLINED = exports.CONSENT_GRANTED = exports.STORAGE_PLUGGABLE = exports.STORAGE_REDIS = exports.STORAGE_LOCALSTORAGE = exports.STORAGE_MEMORY = exports.CONSUMER_PARTIAL_MODE = exports.CONSUMER_MODE = exports.PRODUCER_MODE = exports.STANDALONE_MODE = exports.LOCALHOST_MODE = exports.NONE = exports.OPTIMIZED = exports.DEBUG = exports.SPLIT_EVENT = exports.SPLIT_IMPRESSION = exports.NA = exports.UNKNOWN = exports.CONTROL_WITH_CONFIG = exports.CONTROL = void 0;
-exports.RULE_BASED_SEGMENT = exports.LARGE_SEGMENT = exports.STANDARD_SEGMENT = exports.IN_RULE_BASED_SEGMENT = exports.IN_LARGE_SEGMENT = exports.IN_SEGMENT = exports.FLAG_SPEC_VERSION = exports.PAUSED = exports.ENABLED = exports.DISABLED = exports.NON_REQUESTED = exports.REQUESTED = exports.POLLING = exports.STREAMING = exports.AUTH_REJECTION = exports.SYNC_MODE_UPDATE = exports.ABLY_ERROR = exports.TOKEN_REFRESH = exports.SSE_CONNECTION_ERROR = exports.STREAMING_STATUS = exports.OCCUPANCY_SEC = exports.OCCUPANCY_PRI = exports.CONNECTION_ESTABLISHED = exports.TRACK = exports.TREATMENTS_WITH_CONFIG_BY_FLAGSETS = exports.TREATMENTS_WITH_CONFIG_BY_FLAGSET = exports.TREATMENTS_BY_FLAGSETS = exports.TREATMENTS_BY_FLAGSET = exports.TREATMENTS_WITH_CONFIG = exports.TREATMENT_WITH_CONFIG = exports.TREATMENTS = exports.TREATMENT = void 0;
-// Special treatments
-exports.CONTROL = 'control';
-exports.CONTROL_WITH_CONFIG = {
-    treatment: exports.CONTROL,
-    config: null
-};
-// Constants for unknown and not-applicable values
-exports.UNKNOWN = 'unknown';
-exports.NA = 'NA';
-// Integration data types
-exports.SPLIT_IMPRESSION = 'IMPRESSION';
-exports.SPLIT_EVENT = 'EVENT';
-// Impression collection modes
-exports.DEBUG = 'DEBUG';
-exports.OPTIMIZED = 'OPTIMIZED';
-exports.NONE = 'NONE';
-// SDK Modes
-exports.LOCALHOST_MODE = 'localhost';
-exports.STANDALONE_MODE = 'standalone';
-exports.PRODUCER_MODE = 'producer';
-exports.CONSUMER_MODE = 'consumer';
-exports.CONSUMER_PARTIAL_MODE = 'consumer_partial';
-// Storage types
-exports.STORAGE_MEMORY = 'MEMORY';
-exports.STORAGE_LOCALSTORAGE = 'LOCALSTORAGE';
-exports.STORAGE_REDIS = 'REDIS';
-exports.STORAGE_PLUGGABLE = 'PLUGGABLE';
-// User consent
-exports.CONSENT_GRANTED = 'GRANTED'; // The user has granted consent for tracking events and impressions
-exports.CONSENT_DECLINED = 'DECLINED'; // The user has declined consent for tracking events and impressions
-exports.CONSENT_UNKNOWN = 'UNKNOWN'; // The user has neither granted nor declined consent for tracking events and impressions
-// Client method names
-exports.GET_TREATMENT = 'getTreatment';
-exports.GET_TREATMENTS = 'getTreatments';
-exports.GET_TREATMENT_WITH_CONFIG = 'getTreatmentWithConfig';
-exports.GET_TREATMENTS_WITH_CONFIG = 'getTreatmentsWithConfig';
-exports.GET_TREATMENTS_BY_FLAG_SET = 'getTreatmentsByFlagSet';
-exports.GET_TREATMENTS_BY_FLAG_SETS = 'getTreatmentsByFlagSets';
-exports.GET_TREATMENTS_WITH_CONFIG_BY_FLAG_SET = 'getTreatmentsWithConfigByFlagSet';
-exports.GET_TREATMENTS_WITH_CONFIG_BY_FLAG_SETS = 'getTreatmentsWithConfigByFlagSets';
-exports.TRACK_FN_LABEL = 'track';
-// Manager method names
-exports.SPLIT_FN_LABEL = 'split';
-exports.SPLITS_FN_LABEL = 'splits';
-exports.NAMES_FN_LABEL = 'names';
-// Telemetry
-exports.QUEUED = 0;
-exports.DROPPED = 1;
-exports.DEDUPED = 2;
-exports.STANDALONE_ENUM = 0;
-exports.CONSUMER_ENUM = 1;
-exports.CONSUMER_PARTIAL_ENUM = 2;
-exports.OPTIMIZED_ENUM = 0;
-exports.DEBUG_ENUM = 1;
-exports.NONE_ENUM = 2;
-exports.SPLITS = 'sp';
-exports.IMPRESSIONS = 'im';
-exports.IMPRESSIONS_COUNT = 'ic';
-exports.EVENTS = 'ev';
-exports.TELEMETRY = 'te';
-exports.TOKEN = 'to';
-exports.SEGMENT = 'se';
-exports.MEMBERSHIPS = 'ms';
-exports.TREATMENT = 't';
-exports.TREATMENTS = 'ts';
-exports.TREATMENT_WITH_CONFIG = 'tc';
-exports.TREATMENTS_WITH_CONFIG = 'tcs';
-exports.TREATMENTS_BY_FLAGSET = 'tf';
-exports.TREATMENTS_BY_FLAGSETS = 'tfs';
-exports.TREATMENTS_WITH_CONFIG_BY_FLAGSET = 'tcf';
-exports.TREATMENTS_WITH_CONFIG_BY_FLAGSETS = 'tcfs';
-exports.TRACK = 'tr';
-exports.CONNECTION_ESTABLISHED = 0;
-exports.OCCUPANCY_PRI = 10;
-exports.OCCUPANCY_SEC = 20;
-exports.STREAMING_STATUS = 30;
-exports.SSE_CONNECTION_ERROR = 40;
-exports.TOKEN_REFRESH = 50;
-exports.ABLY_ERROR = 60;
-exports.SYNC_MODE_UPDATE = 70;
-exports.AUTH_REJECTION = 80;
-exports.STREAMING = 0;
-exports.POLLING = 1;
-exports.REQUESTED = 0;
-exports.NON_REQUESTED = 1;
-exports.DISABLED = 0;
-exports.ENABLED = 1;
-exports.PAUSED = 2;
-exports.FLAG_SPEC_VERSION = '1.3';
-// Matcher types
-exports.IN_SEGMENT = 'IN_SEGMENT';
-exports.IN_LARGE_SEGMENT = 'IN_LARGE_SEGMENT';
-exports.IN_RULE_BASED_SEGMENT = 'IN_RULE_BASED_SEGMENT';
-exports.STANDARD_SEGMENT = 'standard';
-exports.LARGE_SEGMENT = 'large';
-exports.RULE_BASED_SEGMENT = 'rule-based';

package/cjs/utils/decompress/index.js

@@ -1,427 +0,0 @@
-"use strict";
-/*
-Trimmed version of "fflate" library (https://www.npmjs.com/package/fflate/v/0.7.1)
-used for GZIP/Zlib decompression in JavaScript, with the minimal modules used by the SDK.
-
-MIT License
-
-Copyright (c) 2020 Arjun Barrett
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-*/
-/* eslint-disable */
-// @ts-nocheck
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.algorithms = void 0;
-exports.algorithms = (function iifeDecompress() {
-    // Handle runtimes without typed arrays
-    if ([typeof Uint8Array, typeof Uint16Array, typeof Uint32Array].some(function (v) { return v != 'function'; })) {
-        return 'global Uint8Array object is not available for gzip/zlib decompression';
-    }
-    // DEFLATE is a complex format; to read this code, you should probably check the RFC first:
-    // aliases for shorter compressed code (most minifers don't do this)
-    var u8 = Uint8Array, u16 = Uint16Array, u32 = Uint32Array;
-    // fixed length extra bits
-    var fleb = new u8([0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, /* unused */ 0, 0, /* impossible */ 0]);
-    // fixed distance extra bits
-    // see fleb note
-    var fdeb = new u8([0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 13, 13, /* unused */ 0, 0]);
-    // code length index map
-    var clim = new u8([16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15]);
-    // get base, reverse index map from extra bits
-    var freb = function (eb, start) {
-        var b = new u16(31);
-        for (var i = 0; i < 31; ++i) {
-            b[i] = start += 1 << eb[i - 1];
-        }
-        // numbers here are at max 18 bits
-        var r = new u32(b[30]);
-        for (var i = 1; i < 30; ++i) {
-            for (var j = b[i]; j < b[i + 1]; ++j) {
-                r[j] = ((j - b[i]) << 5) | i;
-            }
-        }
-        return [b, r];
-    };
-    var _a = freb(fleb, 2), fl = _a[0], revfl = _a[1];
-    // we can ignore the fact that the other numbers are wrong; they never happen anyway
-    fl[28] = 258, revfl[258] = 28;
-    var _b = freb(fdeb, 0), fd = _b[0];
-    // map of value to reverse (assuming 16 bits)
-    var rev = new u16(32768);
-    for (var i = 0; i < 32768; ++i) {
-        // reverse table algorithm from SO
-        var x = ((i & 0xAAAA) >>> 1) | ((i & 0x5555) << 1);
-        x = ((x & 0xCCCC) >>> 2) | ((x & 0x3333) << 2);
-        x = ((x & 0xF0F0) >>> 4) | ((x & 0x0F0F) << 4);
-        rev[i] = (((x & 0xFF00) >>> 8) | ((x & 0x00FF) << 8)) >>> 1;
-    }
-    // create huffman tree from u8 "map": index -> code length for code index
-    // mb (max bits) must be at most 15
-    // TODO: optimize/split up?
-    var hMap = (function (cd, mb, r) {
-        var s = cd.length;
-        // index
-        var i = 0;
-        // u16 "map": index -> # of codes with bit length = index
-        var l = new u16(mb);
-        // length of cd must be 288 (total # of codes)
-        for (; i < s; ++i)
-            ++l[cd[i] - 1];
-        // u16 "map": index -> minimum code for bit length = index
-        var le = new u16(mb);
-        for (i = 0; i < mb; ++i) {
-            le[i] = (le[i - 1] + l[i - 1]) << 1;
-        }
-        var co;
-        if (r) {
-            // u16 "map": index -> number of actual bits, symbol for code
-            co = new u16(1 << mb);
-            // bits to remove for reverser
-            var rvb = 15 - mb;
-            for (i = 0; i < s; ++i) {
-                // ignore 0 lengths
-                if (cd[i]) {
-                    // num encoding both symbol and bits read
-                    var sv = (i << 4) | cd[i];
-                    // free bits
-                    var r_1 = mb - cd[i];
-                    // start value
-                    var v = le[cd[i] - 1]++ << r_1;
-                    // m is end value
-                    for (var m = v | ((1 << r_1) - 1); v <= m; ++v) {
-                        // every 16 bit value starting with the code yields the same result
-                        co[rev[v] >>> rvb] = sv;
-                    }
-                }
-            }
-        }
-        else {
-            co = new u16(s);
-            for (i = 0; i < s; ++i) {
-                if (cd[i]) {
-                    co[i] = rev[le[cd[i] - 1]++] >>> (15 - cd[i]);
-                }
-            }
-        }
-        return co;
-    });
-    // fixed length tree
-    var flt = new u8(288);
-    for (var i = 0; i < 144; ++i)
-        flt[i] = 8;
-    for (var i = 144; i < 256; ++i)
-        flt[i] = 9;
-    for (var i = 256; i < 280; ++i)
-        flt[i] = 7;
-    for (var i = 280; i < 288; ++i)
-        flt[i] = 8;
-    // fixed distance tree
-    var fdt = new u8(32);
-    for (var i = 0; i < 32; ++i)
-        fdt[i] = 5;
-    // fixed length map
-    var flrm = /*#__PURE__*/ hMap(flt, 9, 1);
-    // fixed distance map
-    var fdrm = /*#__PURE__*/ hMap(fdt, 5, 1);
-    // find max of array
-    var max = function (a) {
-        var m = a[0];
-        for (var i = 1; i < a.length; ++i) {
-            if (a[i] > m)
-                m = a[i];
-        }
-        return m;
-    };
-    // read d, starting at bit p and mask with m
-    var bits = function (d, p, m) {
-        var o = (p / 8) | 0;
-        return ((d[o] | (d[o + 1] << 8)) >> (p & 7)) & m;
-    };
-    // read d, starting at bit p continuing for at least 16 bits
-    var bits16 = function (d, p) {
-        var o = (p / 8) | 0;
-        return ((d[o] | (d[o + 1] << 8) | (d[o + 2] << 16)) >> (p & 7));
-    };
-    // get end of byte
-    var shft = function (p) { return ((p + 7) / 8) | 0; };
-    // typed array slice - allows garbage collector to free original reference,
-    // while being more compatible than .slice
-    var slc = function (v, s, e) {
-        if (s == null || s < 0)
-            s = 0;
-        if (e == null || e > v.length)
-            e = v.length;
-        // can't use .constructor in case user-supplied
-        var n = new (v instanceof u16 ? u16 : v instanceof u32 ? u32 : u8)(e - s);
-        n.set(v.subarray(s, e));
-        return n;
-    };
-    // error codes
-    var ec = [
-        'unexpected EOF',
-        'invalid block type',
-        'invalid length/literal',
-        'invalid distance',
-        'stream finished',
-        'no stream handler',
-        ,
-        'no callback',
-        'invalid UTF-8 data',
-        'extra field too long',
-        'date not in range 1980-2099',
-        'filename too long',
-        'stream finishing',
-        'invalid zip data'
-        // determined by unknown compression method
-    ];
-    var err = function (ind, msg, nt) {
-        var e = new Error(msg || ec[ind]);
-        e.code = ind;
-        if (Error.captureStackTrace)
-            Error.captureStackTrace(e, err);
-        if (!nt)
-            throw e;
-        return e;
-    };
-    // expands raw DEFLATE data
-    var inflt = function (dat, buf, st) {
-        // source length
-        var sl = dat.length;
-        if (!sl || (st && st.f && !st.l))
-            return buf || new u8(0);
-        // have to estimate size
-        var noBuf = !buf || st;
-        // no state
-        var noSt = !st || st.i;
-        if (!st)
-            st = {};
-        // Assumes roughly 33% compression ratio average
-        if (!buf)
-            buf = new u8(sl * 3);
-        // ensure buffer can fit at least l elements
-        var cbuf = function (l) {
-            var bl = buf.length;
-            // need to increase size to fit
-            if (l > bl) {
-                // Double or set to necessary, whichever is greater
-                var nbuf = new u8(Math.max(bl * 2, l));
-                nbuf.set(buf);
-                buf = nbuf;
-            }
-        };
-        //  last chunk         bitpos           bytes
-        var final = st.f || 0, pos = st.p || 0, bt = st.b || 0, lm = st.l, dm = st.d, lbt = st.m, dbt = st.n;
-        // total bits
-        var tbts = sl * 8;
-        do {
-            if (!lm) {
-                // BFINAL - this is only 1 when last chunk is next
-                final = bits(dat, pos, 1);
-                // type: 0 = no compression, 1 = fixed huffman, 2 = dynamic huffman
-                var type = bits(dat, pos + 1, 3);
-                pos += 3;
-                if (!type) {
-                    // go to end of byte boundary
-                    var s = shft(pos) + 4, l = dat[s - 4] | (dat[s - 3] << 8), t = s + l;
-                    if (t > sl) {
-                        if (noSt)
-                            err(0);
-                        break;
-                    }
-                    // ensure size
-                    if (noBuf)
-                        cbuf(bt + l);
-                    // Copy over uncompressed data
-                    buf.set(dat.subarray(s, t), bt);
-                    // Get new bitpos, update byte count
-                    st.b = bt += l, st.p = pos = t * 8, st.f = final;
-                    continue;
-                }
-                else if (type == 1)
-                    lm = flrm, dm = fdrm, lbt = 9, dbt = 5;
-                else if (type == 2) {
-                    //  literal                            lengths
-                    var hLit = bits(dat, pos, 31) + 257, hcLen = bits(dat, pos + 10, 15) + 4;
-                    var tl = hLit + bits(dat, pos + 5, 31) + 1;
-                    pos += 14;
-                    // length+distance tree
-                    var ldt = new u8(tl);
-                    // code length tree
-                    var clt = new u8(19);
-                    for (var i = 0; i < hcLen; ++i) {
-                        // use index map to get real code
-                        clt[clim[i]] = bits(dat, pos + i * 3, 7);
-                    }
-                    pos += hcLen * 3;
-                    // code lengths bits
-                    var clb = max(clt), clbmsk = (1 << clb) - 1;
-                    // code lengths map
-                    var clm = hMap(clt, clb, 1);
-                    for (var i = 0; i < tl;) {
-                        var r = clm[bits(dat, pos, clbmsk)];
-                        // bits read
-                        pos += r & 15;
-                        // symbol
-                        var s = r >>> 4;
-                        // code length to copy
-                        if (s < 16) {
-                            ldt[i++] = s;
-                        }
-                        else {
-                            //  copy   count
-                            var c = 0, n = 0;
-                            if (s == 16)
-                                n = 3 + bits(dat, pos, 3), pos += 2, c = ldt[i - 1];
-                            else if (s == 17)
-                                n = 3 + bits(dat, pos, 7), pos += 3;
-                            else if (s == 18)
-                                n = 11 + bits(dat, pos, 127), pos += 7;
-                            while (n--)
-                                ldt[i++] = c;
-                        }
-                    }
-                    //    length tree                 distance tree
-                    var lt = ldt.subarray(0, hLit), dt = ldt.subarray(hLit);
-                    // max length bits
-                    lbt = max(lt);
-                    // max dist bits
-                    dbt = max(dt);
-                    lm = hMap(lt, lbt, 1);
-                    dm = hMap(dt, dbt, 1);
-                }
-                else
-                    err(1);
-                if (pos > tbts) {
-                    if (noSt)
-                        err(0);
-                    break;
-                }
-            }
-            // Make sure the buffer can hold this + the largest possible addition
-            // Maximum chunk size (practically, theoretically infinite) is 2^17;
-            if (noBuf)
-                cbuf(bt + 131072);
-            var lms = (1 << lbt) - 1, dms = (1 << dbt) - 1;
-            var lpos = pos;
-            for (;; lpos = pos) {
-                // bits read, code
-                var c = lm[bits16(dat, pos) & lms], sym = c >>> 4;
-                pos += c & 15;
-                if (pos > tbts) {
-                    if (noSt)
-                        err(0);
-                    break;
-                }
-                if (!c)
-                    err(2);
-                if (sym < 256)
-                    buf[bt++] = sym;
-                else if (sym == 256) {
-                    lpos = pos, lm = null;
-                    break;
-                }
-                else {
-                    var add = sym - 254;
-                    // no extra bits needed if less
-                    if (sym > 264) {
-                        // index
-                        var i = sym - 257, b = fleb[i];
-                        add = bits(dat, pos, (1 << b) - 1) + fl[i];
-                        pos += b;
-                    }
-                    // dist
-                    var d = dm[bits16(dat, pos) & dms], dsym = d >>> 4;
-                    if (!d)
-                        err(3);
-                    pos += d & 15;
-                    var dt = fd[dsym];
-                    if (dsym > 3) {
-                        var b = fdeb[dsym];
-                        dt += bits16(dat, pos) & ((1 << b) - 1), pos += b;
-                    }
-                    if (pos > tbts) {
-                        if (noSt)
-                            err(0);
-                        break;
-                    }
-                    if (noBuf)
-                        cbuf(bt + 131072);
-                    var end = bt + add;
-                    for (; bt < end; bt += 4) {
-                        buf[bt] = buf[bt - dt];
-                        buf[bt + 1] = buf[bt + 1 - dt];
-                        buf[bt + 2] = buf[bt + 2 - dt];
-                        buf[bt + 3] = buf[bt + 3 - dt];
-                    }
-                    bt = end;
-                }
-            }
-            st.l = lm, st.p = lpos, st.b = bt, st.f = final;
-            if (lm)
-                final = 1, st.m = lbt, st.d = dm, st.n = dbt;
-        } while (!final);
-        return bt == buf.length ? buf : slc(buf, 0, bt);
-    };
-    // gzip footer: -8 to -4 = CRC, -4 to -0 is length
-    // gzip start
-    var gzs = function (d) {
-        if (d[0] != 31 || d[1] != 139 || d[2] != 8)
-            err(6, 'invalid gzip data');
-        var flg = d[3];
-        var st = 10;
-        if (flg & 4)
-            st += d[10] | (d[11] << 8) + 2;
-        for (var zs = (flg >> 3 & 1) + (flg >> 4 & 1); zs > 0; zs -= !d[st++])
-            ;
-        return st + (flg & 2);
-    };
-    // gzip length
-    var gzl = function (d) {
-        var l = d.length;
-        return ((d[l - 4] | d[l - 3] << 8 | d[l - 2] << 16) | (d[l - 1] << 24)) >>> 0;
-    };
-    // zlib valid
-    var zlv = function (d) {
-        if ((d[0] & 15) != 8 || (d[0] >>> 4) > 7 || ((d[0] << 8 | d[1]) % 31))
-            err(6, 'invalid zlib data');
-        if (d[1] & 32)
-            err(6, 'invalid zlib data: preset dictionaries not supported');
-    };
-    return {
-        /**
-         * Expands GZIP data
-         * @param data - The data to decompress
-         * @param out - Where to write the data. GZIP already encodes the output size, so providing this doesn't save memory.
-         * @returns The decompressed version of the data
-         */
-        gunzipSync: function (data, out) {
-            return inflt(data.subarray(gzs(data), -8), out || new u8(gzl(data)));
-        },
-        /**
-         * Expands Zlib data
-         * @param data - The data to decompress
-         * @param out - Where to write the data. Saves memory if you know the decompressed size and provide an output buffer of that length.
-         * @returns The decompressed version of the data
-         */
-        unzlibSync: function (data, out) {
-            return inflt((zlv(data), data.subarray(2, -4)), out);
-        }
-    };
-})();

package/cjs/utils/env/isLocalStorageAvailable.js

@@ -1,39 +0,0 @@
-"use strict";
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.isWebStorage = exports.isValidStorageWrapper = exports.isLocalStorageAvailable = void 0;
-function isLocalStorageAvailable() {
-    try {
-        // eslint-disable-next-line no-undef
-        return isValidStorageWrapper(localStorage);
-    }
-    catch (e) {
-        return false;
-    }
-}
-exports.isLocalStorageAvailable = isLocalStorageAvailable;
-function isValidStorageWrapper(wrapper) {
-    var mod = '__SPLITSOFTWARE__';
-    try {
-        wrapper.setItem(mod, mod);
-        wrapper.getItem(mod);
-        wrapper.removeItem(mod);
-        return true;
-    }
-    catch (e) {
-        return false;
-    }
-}
-exports.isValidStorageWrapper = isValidStorageWrapper;
-function isWebStorage(wrapper) {
-    if (typeof wrapper.length === 'number') {
-        try {
-            wrapper.key(0);
-            return true;
-        }
-        catch (e) {
-            return false;
-        }
-    }
-    return false;
-}
-exports.isWebStorage = isWebStorage;

package/cjs/utils/env/isNode.js

@@ -1,9 +0,0 @@
-"use strict";
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.isNode = void 0;
-/**
- * 'true' if running in Node.js, or 'false' otherwise.
- * We check for version truthiness since most shims will have that as empty string.
- */
-// eslint-disable-next-line no-undef
-exports.isNode = typeof process !== 'undefined' && typeof process.version !== 'undefined' && !!process.version ? true : false;

package/cjs/utils/inputValidation/apiKey.js

@@ -1,54 +0,0 @@
-"use strict";
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.releaseApiKey = exports.validateAndTrackApiKey = exports.usedKeysMap = exports.validateApiKey = void 0;
-var constants_1 = require("../../logger/constants");
-var lang_1 = require("../lang");
-var item = 'sdk_key';
-// @TODO replace ApiKey with SdkKey in function names
-/** validates the given SDK key */
-function validateApiKey(log, maybeSdkKey) {
-    var sdkKey = false;
-    if (maybeSdkKey == undefined) { // eslint-disable-line eqeqeq
-        log.error(constants_1.ERROR_NULL, [constants_1.LOG_PREFIX_INSTANTIATION, item]);
-    }
-    else if ((0, lang_1.isString)(maybeSdkKey)) {
-        if (maybeSdkKey.length > 0)
-            sdkKey = maybeSdkKey;
-        else
-            log.error(constants_1.ERROR_EMPTY, [constants_1.LOG_PREFIX_INSTANTIATION, item]);
-    }
-    else {
-        log.error(constants_1.ERROR_INVALID, [constants_1.LOG_PREFIX_INSTANTIATION, item]);
-    }
-    return sdkKey;
-}
-exports.validateApiKey = validateApiKey;
-// Exported for telemetry
-exports.usedKeysMap = {};
-/** validates the given SDK key and also warns if it is in use */
-function validateAndTrackApiKey(log, maybeSdkKey) {
-    var sdkKey = validateApiKey(log, maybeSdkKey);
-    // If sdkKey is correct, we'll save it as the instance creation should work.
-    if (sdkKey) {
-        if (!exports.usedKeysMap[sdkKey]) {
-            // If this key is not present, only warning scenarios is that we have factories for other keys.
-            exports.usedKeysMap[sdkKey] = 1;
-            if (Object.keys(exports.usedKeysMap).length > 1) {
-                log.warn(constants_1.WARN_SDK_KEY, ['an instance of the Split factory']);
-            }
-        }
-        else {
-            log.warn(constants_1.WARN_SDK_KEY, [exports.usedKeysMap[sdkKey] + " factory/ies with this SDK Key"]);
-            exports.usedKeysMap[sdkKey]++;
-        }
-    }
-    return sdkKey;
-}
-exports.validateAndTrackApiKey = validateAndTrackApiKey;
-function releaseApiKey(sdkKey) {
-    if (exports.usedKeysMap[sdkKey])
-        exports.usedKeysMap[sdkKey]--;
-    if (exports.usedKeysMap[sdkKey] === 0)
-        delete exports.usedKeysMap[sdkKey];
-}
-exports.releaseApiKey = releaseApiKey;

package/cjs/utils/inputValidation/attribute.js

@@ -1,20 +0,0 @@
-"use strict";
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.validateAttribute = void 0;
-var lang_1 = require("../../utils/lang");
-function validateAttribute(log, attributeKey, attributeValue, method) {
-    if (!(0, lang_1.isString)(attributeKey) || attributeKey.length === 0) {
-        log.warn(method + ": you passed an invalid attribute name, attribute name must be a non-empty string.");
-        return false;
-    }
-    var isStringVal = (0, lang_1.isString)(attributeValue);
-    var isFiniteVal = (0, lang_1.isFiniteNumber)(attributeValue);
-    var isBoolVal = (0, lang_1.isBoolean)(attributeValue);
-    var isArrayVal = Array.isArray(attributeValue);
-    if (!(isStringVal || isFiniteVal || isBoolVal || isArrayVal)) { // If it's not of valid type.
-        log.warn(method + ": you passed an invalid attribute value for " + attributeKey + ". Acceptable types are: string, number, boolean and array of strings.");
-        return false;
-    }
-    return true;
-}
-exports.validateAttribute = validateAttribute;

package/cjs/utils/inputValidation/attributes.js

@@ -1,25 +0,0 @@
-"use strict";
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.validateAttributesDeep = exports.validateAttributes = void 0;
-var lang_1 = require("../lang");
-var attribute_1 = require("./attribute");
-var constants_1 = require("../../logger/constants");
-function validateAttributes(log, maybeAttrs, method) {
-    // Attributes are optional
-    if (maybeAttrs == undefined || (0, lang_1.isObject)(maybeAttrs)) // eslint-disable-line eqeqeq
-        return maybeAttrs;
-    log.error(constants_1.ERROR_NOT_PLAIN_OBJECT, [method, 'attributes']);
-    return false;
-}
-exports.validateAttributes = validateAttributes;
-function validateAttributesDeep(log, maybeAttributes, method) {
-    if (!validateAttributes(log, maybeAttributes, method))
-        return false;
-    var result = true;
-    Object.keys(maybeAttributes).forEach(function (attributeKey) {
-        if (!(0, attribute_1.validateAttribute)(log, attributeKey, maybeAttributes[attributeKey], method))
-            result = false;
-    });
-    return result;
-}
-exports.validateAttributesDeep = validateAttributesDeep;