@spicenet-io/spiceflow-ui 4.14.2 → 4.14.3-rc.0

package/README.md

@@ -0,0 +1,499 @@
+# SpiceFlow UI SDK
+
+A React component library for building DeFi swap interfaces with multi-chain support.
+
+## Version and migration
+
+Release `4.11.0` includes quote prewarming, scoped fee-hint reuse, concurrent fee
+checks, configurable fee-estimate tolerance, and faster execution-status polling.
+It uses `@spicenet-io/spiceflow-core@0.7.3`. Source spend caps, destination minimums
+and required destination receipts remain enforced. See the fee-estimate tolerance
+section below for the default and configuration.
+
+Check the actual registry tag and client pin before adopting it. See
+[CONSISTENCY-MIGRATION.md](CONSISTENCY-MIGRATION.md) for the earlier inventory/action
+migration. Publishing the SDK does not upgrade consuming apps automatically.
+
+## Installation and provider setup
+
+Select an approved exact version, preserving the app's dependency-age and security policies:
+
+```bash
+bun add --exact @spicenet-io/spiceflow-ui@4.11.0
+```
+
+Reuse compatible host-owned Privy, wagmi and QueryClient providers. Read the exact
+package's peer dependencies; do not replace the wallet stack as part of a version bump.
+
+The SDK adds its stylesheet (spinner keyframes, focus ring, reduced-motion rule) to the
+page when it loads, so no CSS import is needed. `@spicenet-io/spiceflow-ui/styles.css`
+is still exported for a host whose Content Security Policy forbids inline styles;
+importing it as well is harmless.
+
+```tsx
+import { SpiceFlowProvider } from "@spicenet-io/spiceflow-ui";
+
+// Inside the host's existing WagmiProvider → QueryClientProvider → PrivyProvider stack.
+<SpiceFlowProvider
+  provider="privy"
+  network="mainnet"
+  nativeChainId={8453}
+  rpcOverrides={clientRpcUrls}
+>
+  {children}
+</SpiceFlowProvider>;
+```
+
+Configure Privy credentials/policy on the host's `PrivyProvider`. Supply client RPCs
+through `rpcOverrides` for the chains you exercise, and keep the SDK/wallet chain sets
+aligned. An entry in `rpcOverrides` always wins; a chain without one uses the chain's
+built-in endpoint, so an integration that passes none keeps working. Wallet-library
+transports alone do not configure SDK reads. Rollup price lookups read only a
+host-configured RPC. Keep private credentials out of browser bundles.
+
+## Integration ownership
+
+- Use stock components when they fit the approved UI; use `useSpiceSupply` for custom
+  action forms. `useSpiceLock` and legacy `useSpiceAction` delegate to that controller.
+- In this source (not yet published), `useSpiceSupply` defaults `enabled` to `true`.
+  Omit it for a mounted action form, or pass `enabled: isOpen` when a hidden form stays
+  mounted. Use `canExecute` for submit-button readiness; fee calculation does not
+  require toggling `enabled`. Published 4.10.0 still requires an explicit value.
+- Declare the destination token by chain and address:
+  `destinationToken={{ chainId: 8453, address: USDC }}`. The SDK takes the symbol and
+  decimals from the chain's token registry, then from the token contract, and holds the
+  action until they are known. Decimals that cannot be read block the action; a symbol
+  that cannot be read falls back to the shortened address. Any field you pass wins, so a
+  full `{ address, symbol, decimals, chainId }` object behaves exactly as before.
+- Supply destination metadata, protocol `buildActionCalls` or destination-only
+  `lockBatches`, beneficiary semantics, and awaited application updates. The SDK owns
+  inventory, routing, Max, fees, accepted plans, funding, execution and recovery.
+- For the account, use `useSpiceAccount()` instead of reading `SpiceFlowProviderContext`:
+  `mode` (`"embedded"` or `"external"`), `setMode`, `ownerAddress` for the current mode,
+  both wallet addresses and the whitelist state. A provider with a fixed `mode` prop
+  ignores `setMode`.
+- For custom holdings, use `useSpiceInventory` and `assetPositionId`. Keep raw balance,
+  default visibility and spend eligibility separate. Preserve rows during refresh;
+  stale/failed balances cannot authorize spending, and confirmed zero wins.
+- In this unreleased source, eligible External-mode actions with a matching wallet token
+  and destination chain execute directly from the external signer, without embedded funding.
+  Other assets/chains still use embedded funding and the shared routed executor.
+  `onPayExecute` and `onLockExecute` remain blocked; the deprecated external-caller hint
+  supports only the direct case. Verify contract caller/beneficiary and NFT receiver behavior.
+  Published `.16` does not contain this restoration.
+- Supply `input` adds fees to principal; `input-inclusive` uses a total budget; Pay
+  `output` fixes the destination amount. Use controller readiness/Max/status instead of
+  constructing an executor context or duplicating fee arithmetic in the host.
+- Use controller recovery for uncertain funding and `retryFinalization()` for failed
+  application updates after settlement. Preserve original host terms across reload.
+- Deposit and rollup Withdraw retain distinct execution semantics while sharing
+  inventory/policy. Account wallet withdrawal uses the fee-only Supply path.
+
+Inventory isolation does not establish support for simultaneous differently configured
+providers: underlying quote/execution transports still have global state.
+
+## Liquidity venues
+
+When a flow has to swap on the destination chain, the SDK quotes every liquidity
+venue that covers that chain and takes the best fill: the most output on a
+supply, the least input on a pay. Routing is decided here, on your RPC. The
+solver only executes the calls the winning quote produced.
+
+Leave `liquidityVenues` off and you get the built-in venues. Declare it once on
+the provider to add your own, and every component picks them up.
+
+```tsx
+<SpiceFlowProvider
+  network="mainnet"
+  nativeChainId={4663}
+  rpcOverrides={{ 4663: ROBINHOOD_RPC }}
+  liquidityVenues={{
+    venues: [
+      {
+        protocol: "uniswap-v3",
+        chainId: 4663,
+        swapRouter: "0x1e406484F1F204b23cE84B9901C0171a738fd406",
+        quoterV2: "0x3E290e5E01818002A0b672148BdC7514D861C7B3",
+        hubCurrencies: ["0x0bd7d308f8e1639fab988df18a8011f41eacad73"],
+      },
+    ],
+  }}
+>
+```
+
+Your venues race the built-ins on price; they do not override them. Set
+`includeDefaults: false` to drop the built-ins and route only through what you
+declared. On a chain with no venue at all, quoting fails with that chain named
+rather than falling back to something you did not configure.
+
+Every entry names one chain and one protocol family, and serves both swap
+directions. Supply the **deployment's** addresses, not a pool address: a
+v3-style pool calls back into `msg.sender`, so swaps go through the router and
+quotes through the quoter. The SDK finds the pools from the fee tiers (or tick
+spacings) and hub currencies.
+
+| `protocol`             | Required                                          | Optional                                                 |
+| ---------------------- | ------------------------------------------------- | -------------------------------------------------------- |
+| `uniswap-v3`           | `chainId`, `swapRouter`, `quoterV2`               | `name`, `feeTiers`, `hubCurrencies`, `routerHasDeadline` |
+| `uniswap-v4`           | `chainId`, `quoter`, `universalRouter`, `permit2` | `name`, `hubCurrencies`                                  |
+| `aerodrome-slipstream` | `chainId`, `swapRouter`, `quoterV2`               | `name`, `tickSpacings`, `hubCurrencies`                  |
+
+`name` is the label shown to the user as "via <name>" once a swap is quoted, so
+give it the name people know the venue by. It defaults to the protocol, which
+means a swap always names something real rather than a family it does not belong
+to.
+
+`hubCurrencies` are the intermediate tokens tried for two-hop routes, usually
+wrapped native and the chain's main stablecoin. Set `routerHasDeadline` when the
+deployment forked the original Uniswap `SwapRouter`, whose exact-output structs
+carry a deadline; SwapRouter02 forks do not.
+
+Most DEXs are forks of one of these families, so adding one is addresses only.
+A venue from a different family (a Uniswap v2 pair, Curve, Balancer) needs an
+adapter in the SDK — send us the chain, router, quoter and one funded pool and
+it becomes a `protocol` everyone can name.
+
+## Components
+
+- **SwapWidget** - Main swap interface component
+- **AssetSelector** - Token selection component
+- **SpiceDeposit** - Deposit modal component
+- **StatusDisplay** - Transaction status display
+- **ProviderLogin** - Wallet connection component
+- **DebugWidget** - Development debugging component
+- **Button**, **Input**, **Modal** - UI primitives
+
+## Development
+
+### Rollup balance pricing
+
+Rollup USD values use the host-configured RPC provider's pricing capability when the balance API has no valid value. The built-in account panel and withdrawal modal enable this while open; custom `useSpiceAssets` consumers can opt in with `priceEnabled`. Quantities arrive independently. Lookups follow receipt mappings, prefer `nativeChainId`, and fall back to other supported chains with a configured Alchemy endpoint. Explicit account `tokenPrices` overrides still take precedence over provider quotes.
+
+Wallet discovery and rollup balances share a one-minute quote cache. Pricing polls only while the view is open and the page is visible. A failed refresh can retain a marked stale quote for up to five minutes; an unavailable quote displays `—`. No extra key, internal RPC, or symbol-based ERC-20 price fallback is used.
+
+### Host tokens
+
+A token the SDK does not know (a protocol's own token, a receipt token) is declared
+once on the provider. Every surface that lists balances then reads it: Supply, Pay,
+Lock, the account panel and Withdraw.
+
+```tsx
+<SpiceFlowProvider
+  additionalSourceTokens={[{ address: TOKEN, chainId: 8453, symbol: "TOKEN", decimals: 18 }]}
+>
+```
+
+A component's or hook's own `additionalSourceTokens` still works and is added to the
+provider's list.
+
+### Host token prices
+
+A host token usually has no price the SDK can find, so the account panel lists it
+without a USD value. `AccountDisplay.tokenPrices` takes the host's own price for it,
+keyed by `chainId:address`. The value counts toward the account total and the row
+sorts with the rest.
+
+```tsx
+<AccountDisplay tokenPrices={{ [`8453:${TOKEN}`]: tokenUsdPrice }} />
+```
+
+The SDK's own price wins whenever it has one. A symbol key prices rollup balances
+only: any wallet token can carry any symbol, so a wallet balance is matched by address
+alone. The price is for display and never changes which balance an action spends.
+
+### Host-supplied token logos
+
+`AccountDisplay.tokenLogos` maps a token symbol to a logo URL, the same key
+shape `tokenPrices` uses. A discovered embedded-wallet balance falls back to
+it when the RPC provider returns no logo, which is what happens for a token
+that is not in the chain's configured token list. Provider metadata still
+wins when it has a logo.
+
+```tsx
+<AccountDisplay tokenLogos={{ TOKEN: tokenLogoUrl }} />
+```
+
+For a host-rendered asset row, this source also exports the SDK's existing logo
+resolver from the package root:
+
+```tsx
+const logo = useTokenLogo(asset.logoURI, asset.chainId, asset.address);
+```
+
+Import `useTokenLogo` from `@spicenet-io/spiceflow-ui`. It returns the supplied logo
+immediately, otherwise resolves the shared chain/address token list asynchronously.
+Until a logo is available, it returns `undefined`; keep the balance and selection
+usable and render the host's usual fallback. This source export requires an SDK
+release before a consuming app can adopt it.
+
+### Account with Deposit and Withdraw
+
+`SpiceAccount` renders `AccountDisplay` together with `SpiceDeposit` and
+`SpiceWithdraw`, and owns their open state. Withdraw on an idle rollup balance opens
+the modal with that balance selected. It takes every `AccountDisplay` prop except the
+two click handlers; `depositProps` and `withdrawProps` pass through to the modals.
+`styles` and `onDepositSuccess` are shared with the modals unless those props set
+their own.
+
+```tsx
+<SpiceAccount appName="MyApp" onDepositSuccess={refresh} />
+```
+
+Use `AccountDisplay` directly to hide one of the buttons or to open your own flow
+from them.
+
+### Withdraw from an account balance
+
+`AccountDisplay.onWithdrawClick` receives the rollup receipt-token ID when a
+user clicks Withdraw on an idle rollup balance. The main Withdraw button calls
+it without an ID. Pass the ID to `SpiceWithdraw.initialSourceAssetId` to open
+the existing modal with that asset selected; the user chooses the destination
+network inside the modal. Existing callbacks that take no arguments continue
+to work.
+
+```tsx
+const [withdrawOpen, setWithdrawOpen] = useState(false);
+const [withdrawAssetId, setWithdrawAssetId] = useState<string>();
+
+<AccountDisplay
+  onWithdrawClick={(receiptTokenId) => {
+    setWithdrawAssetId(receiptTokenId);
+    setWithdrawOpen(true);
+  }}
+/>
+<SpiceWithdraw
+  isOpen={withdrawOpen}
+  onClose={() => setWithdrawOpen(false)}
+  initialSourceAssetId={withdrawAssetId}
+/>
+```
+
+`buildSpicenetBatch` defaults to the SDK's `buildSpicenetWithdrawalBatch`. An
+integration that already passes a builder keeps it as an override, and its
+callbacks are unchanged.
+`initialSourceAssetId` selects a current balance by ID; it does not supply a
+cached balance or change the receipt's supported withdrawal routes.
+
+### Funding sources
+
+Supply, Pay and Lock list every balance that can fund the action: the embedded wallet
+and rollup balances, and the connected external wallet, in either wallet mode. To keep a
+mode to its own wallet, pass `includeExternalWalletAssets={false}` (Embedded mode) or
+`includeCrossChainEmbeddedAssets={false}` (External mode). A user who holds the same
+token in both wallets sees one row per wallet; a host that preselects a source should
+match on `assetPositionId`, not on symbol or address alone.
+
+### Action Fee Readiness
+
+- Routed Supply, Pay and Lock actions must surface fee estimation before enabling submission.
+- Eligible direct external actions still require an accepted plan but charge no Spicenet fee. Network gas remains payable in the external wallet; native Max reserves gas.
+- Deposit gas and rollup withdrawal semantics remain distinct from action intent fees. Preserve their existing quote/readiness requirements.
+- Account wallet withdrawal is a fee-only Supply action. Do not bypass its fee/readiness gates based on the label "withdraw".
+- Custom actions use the shared controller's `canExecute`; an available balance or old quote alone is insufficient.
+- `onSubmit` on `SpiceSupply`, `SpiceLock`, `SpiceDeposit` and the shared controller fires once when the user submits and the SDK accepts it, before any wallet prompt. Use it for "transaction in progress" feedback instead of listening for clicks on SDK buttons.
+- `max()` on the shared controller (`useSpiceSupply`, `useSpiceLock`) resolves the fee-aware Max for the selected source, or `null` when there is none or the action fixes its output. The host sets the result as the amount.
+
+### Fee funding for funded actions
+
+Set `feeFunding: ["input", "proceeds", "balance"]` on `useSpiceSupply`,
+`SpiceSupply`, `useSpiceAction`, `useSpiceLock` or `SpiceLock` to use the shared
+hierarchy for wallet-funded actions on the destination chain. This applies to
+arbitrary protocol calls: swaps, deposits, staking, lending and repayments.
+Direct payment precedes conversion **within each tier**. Existing defaults remain
+unchanged; `feeFunding: []` retains the existing selected-source path.
+
+- `amountDirection: "input-inclusive"` offers the selected budget as input.
+  Fees reduce that input and the SDK requotes the conversion before building
+  protocol calls. The builder must honour the amount passed to it.
+- `"input"` preserves the selected principal; `"output"` preserves the exact
+  payment or repayment. Neither offers required principal to the input tier.
+- `actionProceeds: { token, resolve }` declares an amount remaining in the
+  executor **after all protocol calls**. Conversion output that is deposited,
+  staked, used for repayment or sent away is not available for fees. The SDK
+  resolves proceeds only if it reaches that tier and rechecks them before signing.
+  The object declaration alone does not opt a funded action in: it requires a
+  nonempty `feeFunding` order, preserving existing callers' selected-source planning.
+- Balance fallback reserves the selected principal. Only the remaining amount
+  of that exact position can pay fees. `fees.sourceSpendCap` includes fee spending
+  from the same position, and `fees.fundingSource` reports the chosen source.
+
+For an input-inclusive swap whose output stays in the executor,
+`actionProceeds: "output"` enables the same hierarchy and declares the output as
+available proceeds. If proceeds pay fees, `fees.destinationAmount` and
+`quote.estimatedOutput` show the net minimum and expected output respectively.
+Do not use this shortcut for calls that consume or send away the conversion output.
+
+Local external-wallet funding still transfers the principal to the executor
+first. Direct external execution keeps its native-gas path. External native Max
+reserves transfer gas, and fixed-principal Max reserves execution fees.
+Cross-chain and rollup **principal** routes retain their existing funding planner;
+this extension does not let destination proceeds pay earlier source or bridge
+costs, or add balance fallback to those routes. Custom fee orders on those routes fail
+explicitly instead of silently charging a different tier. Rollup balances can still fund
+fees for a local action through the existing fee-funding withdrawal leg. Standalone
+`SpiceDeposit` and rollup `SpiceWithdraw` retain their distinct transfer semantics;
+protocol deposits/withdrawals through the action controller use the contract above.
+
+All paths retain fee readiness and accepted-plan validation. This capability
+requires an SDK release and explicit integration opt-in; it does not upgrade
+published packages or deployed apps.
+
+### Supply fee-estimate tolerance
+
+In `4.11.0`, `SpiceFlowProvider` defaults `feeToleranceBps` to
+`4000` (40%). Clients can override it, for example:
+
+```tsx
+<SpiceFlowProvider {...config} feeToleranceBps={100}>
+  {children}
+</SpiceFlowProvider>
+```
+
+`100` is 1%; `0` disables the drift allowance. Existing conservative fixed-fee
+retention still applies when estimates fall. Values must be integers from `0` to
+`10000`. The allowance is relative to each accepted fee component: a fee of 100
+allows a fresh estimate up to 140 at the default. A zero fee cannot become positive.
+
+This setting covers fee convergence and pre-sign validation for user-transfer
+Supply plans, including stock/controlled Supply and input-mode Lock consumers.
+Within tolerance, the SDK keeps the quoted fee amounts and transaction calls;
+it does not add a 40% fee buffer, increase the source spend cap, or relax swap
+slippage/minimum outputs. Changing the setting invalidates prepared plans.
+Backend acceptance and funding checks still apply. Exact-output Pay, fee-only
+funding, deposits and backend-transfer convergence retain their separate rules.
+
+The open Supply controller retains fee construction hints for at most 30 seconds
+across amount edits in the same wallet, route and configuration scope. These hints
+do not enable submission: the SDK rebuilds the current calls, then checks source
+gas and destination fees concurrently. User-transfer source gas uses the same
+configured fee tolerance; accepted amounts and source caps stay unchanged. A hint
+that no longer fits falls back to full preparation. Closing the form clears hints.
+Servers advertising fee validation price the already constructed destination fee
+calls; older servers retain the estimate path. Cold preparation still sizes fees
+from scratch. Input route quotes debounce for 100 ms; routed fee preparation adds
+no second debounce. These optimizations do not establish a latency SLA.
+
+Fee-inclusive, user-transfer Supply also prewarms when an eligible source is
+selected with an empty/zero amount. It constructs a provisional quote for at most
+one token, capped by the available balance, and retains only fee hints. The amount,
+fee preview and executable plan remain empty. Typing can await in-flight prewarming
+before validating the real amount; closing or changing wallet/configuration
+cancels it. Failed provisional preparation leaves normal quoting available.
+This does not apply to direct external actions, exact-output Pay, fee-only actions
+or actions with explicit funding inputs/proceeds. No signature or submission occurs
+during prewarming. The time available before typing determines how much work it hides.
+
+### Fee funding for fee-only actions
+
+- A fee-only action (`feeOnlyAction`) runs on what the executing wallet already holds; the SDK funds only the Spicenet fees, in the chain's fee token (`destinationToken`).
+- With no `selectedAsset`, the SDK picks the fee source and the user is never asked. The action's input (`actionInput`) comes first, then its proceeds (`actionProceeds`), so the fee stays inside the action the user submitted; then other balances: same-chain embedded wallet before rollup, and within each, balances already in the fee token before balances that swap into it. The first source that simulates and covers the fee wins and is reported as `fees.fundingSource`; a source whose swap has no route, or that cannot cover the fee within slippage, is skipped for the next.
+- Declare `actionInput` for every token the action consumes and honour the amount passed to `buildActionCalls`: when fees come from an input, the action is built for the remainder. Declare `actionProceeds` for a token the action leaves in the wallet. Both are optional; with neither, only balances can pay. Omit `actionProceeds` when the output is delivered to another owner.
+- `feeFunding` overrides the level order per transaction, for example `["proceeds", "input", "balance"]`; the order inside the balance level is fixed. An empty list leaves the choice to the host's `selectedAsset`.
+- A `selectedAsset` on a fee-only action is an explicit host choice and funds the fee from that balance as before.
+- Account wallet withdrawals use this hierarchy automatically and display the chosen fee asset without a selector. The exact withdrawal amount is reserved before ranking balances; only its remainder can pay fees. Custom `useSpiceSupply` actions that must preserve an exact principal can declare `feeFundingReserve: { asset, amount }` instead of offering that principal as `actionInput`.
+- `feeOnlyAction` alone declares the action: `amountDirection` defaults to `"output"` and `paymentAmount` to `"0"`. Explicit values still win.
+- `submit()` on the controller runs the executor that matches `amountDirection`. `submitSupply()` and `submitPay()` remain for existing callers.
+
+### Updating and releasing
+
+Change the shared inventory/policy/controller owner and audit affected stock and custom
+consumers. Use the central team's `workflow`, `ui-quality` and `shared/sdk.md` guidance;
+keep skills in the skills repo rather than copying them here.
+
+Read the central `shared/client-design-decisions.md` register before an upgrade. Map
+applicable decision IDs to affected consumers and regression scenarios, and report each
+result with exact candidate evidence. Preserve agreed behavior and ownership even when
+types compile; a deliberate change needs an explicit product decision and migration plan.
+
+Run focused regressions, `bun test`, `bun run typecheck` and `bun run build`, then validate
+affected consumer builds and rendered/financial behavior on the exact candidate. Record
+package identity, configuration, acceptance coverage and untested cases. Earlier candidate
+results do not automatically apply to newer main or a new client.
+
+If core/API changes are needed, resolve those dependencies before their UI/app consumers.
+An inventory/controller-only change does not inherently require a core release. After
+explicit release authorization, publish a prerelease with a non-`latest` tag, verify its
+registry artifact, and pin/test that exact version in each adopting app. Stable promotion,
+client deployment and docs targeting are separate release decisions. This refactor adds
+no automatic npm publishing.
+
+### Building the Library
+
+```bash
+bun run build
+```
+
+### Type Checking
+
+```bash
+bun run typecheck
+```
+
+CI runs this on every pull request, so a type error fails the build.
+
+### Formatting
+
+```bash
+bun run format
+```
+
+Prettier runs over staged files on commit via lint-staged. There is no ESLint
+setup in this repository.
+
+## Component Playground
+
+This repository includes a lightweight React playground app for viewing and testing all components without the complexity of Storybook.
+
+### Running the Playground
+
+1. Install dependencies (if not already done):
+
+   ```bash
+   bun install --frozen-lockfile
+   ```
+
+2. Navigate to the playground directory:
+
+   ```bash
+   cd playground
+   ```
+
+3. Install playground dependencies:
+
+   ```bash
+   bun install --frozen-lockfile
+   ```
+
+4. Start the development server:
+
+   ```bash
+   bun run dev
+   ```
+
+   The playground will open automatically at `http://localhost:3000`
+
+### Using the Playground
+
+- **Left Sidebar**: Browse available components
+- **Main Area**: View the selected component with different example variants
+- **Example Tabs**: Switch between different states/examples for each component
+
+### Adding a New Component Example
+
+To add a new example variant for a component:
+
+1. Open `playground/src/ComponentRegistry.tsx`
+2. Find the component's entry in the `examples` object
+3. Add a new entry to the array:
+   ```tsx
+   {
+     label: 'Your Example Name',
+     render: () => <YourComponent {...props} />,
+   }
+   ```
+
+The playground will automatically pick up the new example and display it as a tab.
+
+## License
+
+MIT

package/dist/auth-privy.js

@@ -1,3 +1,3 @@
 "use client";
 (function(){if(typeof document==="undefined"||document.getElementById("spiceflow-styles"))return;var s=document.createElement("style");s.id="spiceflow-styles";s.textContent="@keyframes spiceflow-spin{0%{transform:rotate(0deg)}to{transform:rotate(1turn)}}@keyframes spin{0%{transform:rotate(0deg)}to{transform:rotate(1turn)}}@media (prefers-reduced-motion:reduce){*,:after,:before{animation-duration:.001ms!important;animation-iteration-count:1!important;scroll-behavior:auto!important;transition-duration:.001ms!important}}.spiceflow-focus-ring:focus-visible,[data-spiceflow-focus]:focus-visible{border-radius:4px;outline:2px solid currentColor;outline-offset:2px}@media (forced-colors:active){.spiceflow-focus-ring:focus-visible,[data-spiceflow-focus]:focus-visible{outline:2px solid Highlight}}.ibm-plex-mono-thin{font-weight:100}.ibm-plex-mono-extralight,.ibm-plex-mono-thin{font-family:IBM Plex Mono,monospace!important;font-style:normal}.ibm-plex-mono-extralight{font-weight:200}.ibm-plex-mono-light{font-weight:300}.ibm-plex-mono-light,.ibm-plex-mono-regular{font-family:IBM Plex Mono,monospace!important;font-style:normal}.ibm-plex-mono-regular{font-weight:400}.ibm-plex-mono-medium{font-weight:500}.ibm-plex-mono-medium,.ibm-plex-mono-semibold{font-family:IBM Plex Mono,monospace!important;font-style:normal}.ibm-plex-mono-semibold{font-weight:600}.ibm-plex-mono-bold{font-family:IBM Plex Mono,monospace!important;font-style:normal;font-weight:700}#privy-modal-content button{border-radius:6px;font-family:IBM Plex Mono,monospace!important;font-size:small;letter-spacing:-.5px;text-transform:uppercase}#privy-modal-content input{background:#fff;border-radius:6px;padding-top:5px!important}#privy-dialog-title{display:none!important;font-size:18px;padding-bottom:10px;padding-top:10px}.AppLogoContainer-sc-a206bd44-0{display:none}#privy-modal-content{background:var(--Neutral-0,#fafafa);border:6px solid var(--Neutral-1,#e9e9e9);box-shadow:inset 0 0 0 1px rgba(0,0,0,.15),0 330px 92px transparent,0 211px 84px rgba(0,0,0,.01),0 119px 71px rgba(0,0,0,.05),0 53px 53px rgba(0,0,0,.09),0 13px 29px rgba(0,0,0,.1);height:auto!important;padding-bottom:10px}.Subtitle-sc-ddbf22b4-4{font-size:12px;margin-top:-14px;opacity:.5}.StyledLink-sc-1c6127e5-0{background:none!important}.StyledLink-sc-c8577138-0,.login-method-button{font-family:IBM Plex Mono,monospace!important}.StyledLink-sc-c8577138-0{font-style:uppercase}#protected-by-privy{color:#000!important}";document.head.appendChild(s)})();
-import{P as g}from"./privy-B7TjILWd.js";import"react/jsx-runtime";import"react";import"@spicenet-io/spiceflow-core";import"@tanstack/react-query";import"viem";import"@privy-io/react-auth";import"wagmi";import"viem/actions";export{g as PrivyLogin};
+import{P as g}from"./privy-BHcRHRsA.js";import"react/jsx-runtime";import"react";import"@spicenet-io/spiceflow-core";import"@tanstack/react-query";import"viem";import"@privy-io/react-auth";import"wagmi";import"viem/actions";export{g as PrivyLogin};