@specy/risc-v 3.7.0 → 4.0.0

package/dist/index.d.ts

@@ -44,17 +44,70 @@ type JsInstructionToken = {
     value: string;
     type: string;
 };
+/**
+ * Why a run call (`step`, `simulate`, `simulateWithLimit`, `simulateWithBreakpoints`,
+ * `simulateWithBreakpointsAndLimit`) stopped. The same enum, with the same values, as
+ * `@specy/mips`'s.
+ */
 declare enum StopReason {
-    NONE = -1,// no simulation has run yet
+    /** No run call has stopped since the program was initialized; only `getStopReason` reports it. */
+    NONE = -1,
+    /** A breakpoint address or an `ebreak` was reached. */
     BREAKPOINT = 0,
+    /** Never returned: a runtime failure rejects the run call with a `RuntimeError` instead. */
     EXCEPTION = 1,
-    MAX_STEPS = 2,// includes step mode (where maxSteps is 1)
+    /** The instruction limit was reached, which is what a single `step()` ends on. */
+    MAX_STEPS = 2,
+    /** An exit service (10 or 93) ran, or the program had already exited and nothing ran. */
     NORMAL_TERMINATION = 3,
-    CLIFF_TERMINATION = 4,// run off bottom of program
+    /** The program ran off the end of its code: there is no statement at the program counter. */
+    CLIFF_TERMINATION = 4,
+    /** Not reachable through this package. */
     PAUSE = 5,
+    /** Not reachable through this package. */
     STOP = 6
 }
+/**
+ * What a `RuntimeError` was:
+ * - `exception`: a RISC-V exception the program had no trap handler for: a misaligned or faulting
+ *   access, an illegal instruction, an instruction fetch outside the program.
+ * - `syscall`: an ecall refused its service number, arguments or input, such as "invalid integer
+ *   input (syscall 5)" or "invalid or unimplemented syscall service: 99".
+ * - `handler`: a host handler or memory observer threw, rejected or broke its contract; its `cause`
+ *   is what it threw or rejected with.
+ * - `internal`: the simulator itself failed.
+ */
+type RuntimeErrorKind = 'exception' | 'syscall' | 'handler' | 'internal';
+/**
+ * The error a run call rejects with when the program fails at runtime: an `Error` named
+ * `RuntimeError` with typed fields, so that a host never parses its text. Any other rejection,
+ * such as a run call on a program that did not assemble, is the plain error it is.
+ */
+interface RuntimeError extends Error {
+    readonly name: 'RuntimeError';
+    readonly kind: RuntimeErrorKind;
+    /**
+     * The address of the instruction that failed, or of the program counter that could not be
+     * fetched, as a signed 32 bit int like `JsProgramStatement.address`.
+     */
+    readonly address: number;
+    /** The failing statement's source file, or null when there is no statement. */
+    readonly sourcePath: string | null;
+    /** The failing statement's one-based line in `sourcePath`, or null. */
+    readonly line: number | null;
+    /**
+     * RARS's own words, without the location: "Runtime exception at 0x00400004: invalid or
+     * unimplemented syscall service: 99", "Handler readInt did not return a string".
+     */
+    readonly message: string;
+    /** For a `handler` failure, what the handler threw or rejected with. */
+    readonly cause?: unknown;
+}
+/** Whether a run call's rejection is a typed `RuntimeError`. */
+declare function isRuntimeError(error: unknown): error is RuntimeError;
+/** The kind of message dialog syscall 55 asks for; any other value of a1 asks for a plain message. */
 declare enum DialogType {
+    PLAIN_MESSAGE = -1,
     ERROR_MESSAGE = 0,
     INFORMATION_MESSAGE = 1,
     WARNING_MESSAGE = 2,
@@ -65,97 +118,114 @@ declare enum ConfirmResult {
     NO = 1,
     CANCEL = 2
 }
+/**
+ * The handlers a program's syscalls reach the outside world through, each as its arguments and its
+ * answer. The syscalls own each service's semantics, as RARS defines them: they format what they
+ * print and parse what they read, so a handler only moves text and bytes. Bytes cross as plain
+ * arrays of numbers from 0 to 255.
+ */
 type HandlerMap = {
+    /**
+     * Syscall 1024: open a file, with `flags` 0 to read and 1 to write, `append` set for flags 9. The
+     * path is the program's string decoded from UTF-8. Answer with the new file descriptor, or -1
+     * when the file cannot be opened.
+     */
     openFile: {
         in: [filename: string, flags: number, append: boolean];
         out: number;
     };
+    /** Syscall 57: close a file descriptor that `openFile` returned. */
     closeFile: {
         in: [fileDescriptor: number];
         out: void;
     };
+    /**
+     * Syscall 64 on a file descriptor that `openFile` returned: write the bytes. Answer with the
+     * number of bytes written, or -1 when the write failed; the program receives it in a0.
+     */
     writeFile: {
         in: [fileDescriptor: number, buffer: number[]];
-        out: void;
+        out: number;
     };
+    /**
+     * Syscall 63 on a file descriptor that `openFile` returned: read at most `length` bytes. Answer
+     * with `[count, bytes]`, where a count of 0 is the end of the file and -1 a failed read.
+     */
     readFile: {
-        in: [fileDescriptor: number, destination: number[], length: number];
-        out: [readOrEof: number, buffer: number[]];
+        in: [fileDescriptor: number, length: number];
+        out: [count: number, buffer: number[]];
     };
+    /**
+     * Syscall 50: a Yes, No and Cancel question. Cancel reaches the program as 2. Every dialog's
+     * message is the program's string at a0, decoded from UTF-8.
+     */
     confirm: {
         in: [message: string];
         out: ConfirmResult;
     };
+    /**
+     * Syscalls 51 to 54: ask for a line of text. Answer with the text, or null when the user cancels,
+     * which the program receives as status -2. The syscall parses the text itself, as RARS does;
+     * 54 stores it as UTF-8, measuring the buffer in bytes.
+     */
     inputDialog: {
         in: [message: string];
-        out: string;
+        out: string | null;
     };
+    /** Syscalls 55, 56 and 58 to 60: show a message. The program waits until the handler settles. */
     outputDialog: {
         in: [message: string, type: DialogType];
         out: void;
     };
-    askDouble: {
-        in: [message: string];
-        out: number;
-    };
-    askFloat: {
-        in: [message: string];
-        out: number;
-    };
-    askInt: {
-        in: [message: string];
-        out: number;
-    };
-    askString: {
-        in: [message: string];
-        out: string;
-    };
-    readDouble: {
+    /**
+     * Syscall 5: the line typed. The syscall trims it and parses it as Java's `Integer.parseInt`
+     * does; anything else stops the program with "invalid integer input (syscall 5)".
+     */
+    readInt: {
         in: [];
-        out: number;
+        out: string;
     };
+    /**
+     * Syscall 6: the line typed. The syscall trims it and parses it as Java's `Float.parseFloat`
+     * does; anything else stops the program with "invalid float input (syscall 6)".
+     */
     readFloat: {
         in: [];
-        out: number;
+        out: string;
     };
-    readInt: {
+    /**
+     * Syscall 7: the line typed. The syscall trims it and parses it as Java's `Double.parseDouble`
+     * does; anything else stops the program with "invalid double input (syscall 7)".
+     */
+    readDouble: {
         in: [];
-        out: number;
+        out: string;
     };
+    /**
+     * Syscall 8: the line typed. The syscall stores it as UTF-8, as RARS does: at most the buffer's
+     * length less one characters, then at most that many bytes of them, so a character can be cut
+     * where the buffer ends.
+     */
     readString: {
         in: [];
         out: string;
     };
+    /**
+     * Syscall 12: the character typed, Enter as `"\n"`. The syscall takes the first UTF-16 unit of the
+     * answer, as RARS does (`é` reads as 233, an emoji as its high surrogate); an empty answer stops
+     * the program with "invalid char input (syscall 12)".
+     */
     readChar: {
         in: [];
         out: string;
     };
-    logLine: {
-        in: [message: string];
-        out: void;
-    };
-    log: {
-        in: [message: string];
-        out: void;
-    };
-    printChar: {
-        in: [c: string];
-        out: void;
-    };
-    printDouble: {
-        in: [d: number];
-        out: void;
-    };
-    printFloat: {
-        in: [f: number];
-        out: void;
-    };
-    printInt: {
-        in: [i: number];
-        out: void;
-    };
+    /**
+     * Program output: the text every print syscall (1 to 4, 11 and 34 to 36) formats, exactly as
+     * RARS prints it on Java 21, so a float prints `1.0` and `1.0E-5`. Print string (4) decodes the
+     * string from UTF-8; print char (11) prints the character numbered by the low byte of a0.
+     */
     printString: {
-        in: [l: string];
+        in: [text: string];
         out: void;
     };
     /**
@@ -167,9 +237,10 @@ type HandlerMap = {
         out: void;
     };
     /**
-     * Syscall 30: the program time in milliseconds, split by the syscall into a0 (low word) and
-     * a1 (high word). Answer with `Date.now()` for a live run, or with a virtual clock for a
-     * scripted one, so that elapsed-time output stays reproducible.
+     * Syscall 30, and every instruction that reads the `time` CSR (or `timeh`, its upper half on
+     * RV32): the program time in milliseconds. The syscall splits it into a0 (low word) and a1 (high
+     * word). Answer with `Date.now()` for a live run, or with a virtual clock for a scripted one, so
+     * that elapsed-time output stays reproducible.
      */
     time: {
         in: [];
@@ -181,7 +252,7 @@ type HandlerMap = {
      * of input and -1 a failed read. Return a promise to wait for the user.
      */
     stdIn: {
-        in: [buffer: number[], length: number];
+        in: [length: number];
         out: [count: number, buffer: number[]];
     };
     /**
@@ -192,14 +263,30 @@ type HandlerMap = {
         in: [fileDescriptor: number, offset: number, whence: number];
         out: number;
     };
+    /** Syscall 64 on descriptor 1: the bytes written to standard output. */
     stdOut: {
         in: [buffer: number[]];
         out: void;
     };
+    /** Syscall 64 on descriptor 2: the bytes written to standard error. */
     stdErr: {
         in: [buffer: number[]];
         out: void;
     };
+    /**
+     * Syscalls 41 to 44, on the first use of a generator the program has not seeded with service
+     * 40: the seed it starts from, as `new java.util.Random(seed)` takes it, a whole number from 0
+     * to 2^48 - 1 (every seed a Java long can hold scrambles to the state one of these does).
+     * `index` is the generator's number from a0. Answer with host randomness for a live run, or
+     * with a fixed seed for a scripted one, so that a Testcase gets the same numbers every time.
+     *
+     * Optional: without it a generator starts from host randomness, as in RARS. The generators
+     * implement `java.util.Random` exactly, so a seeded program prints the numbers RARS prints.
+     */
+    randomSeed: {
+        in: [index: number];
+        out: number;
+    };
 };
 /**
  * Notified after a write anywhere in an observed address range.
@@ -361,12 +448,26 @@ declare enum BackStepAction {
      * A whole Poke: every value one `beginPoke`/`endPoke` transaction wrote, restored together.
      * A Poke is a single back step, so it takes one slot of the undo size whatever it wrote.
      */
-    POKE = 13
+    POKE = 13,
+    /**
+     * An exit service (10 or 93): undoing it leaves the program running on the ecall again.
+     * `param1` is 1 if the program had already exited (never, as nothing runs after an exit),
+     * `oldValue` the exit code it replaced and `newValue` the code the exit set.
+     */
+    EXIT_RESTORE = 14,
+    /**
+     * A random service (40 to 44) advanced or reseeded generator `param1`: undoing it puts the
+     * generator back, so that stepping the service again draws the same number. The generator's
+     * state is the simulator's own, so `param2`, `oldValue` and `newValue` are 0.
+     */
+    RANDOM_STREAM_RESTORE = 15
 }
 /**
  * Represents a back step in the simulation undo stack.
  */
 interface JsBackStep {
+    /** Opaque decimal identity, unique across Undo, initialize and reassembly in this module. */
+    readonly serial: string;
     /**
      * The action performed (e.g., register write, memory write).
      */
@@ -396,8 +497,10 @@ interface JsBackStep {
      *   was made, in the low order bits.
      * - `PC_RESTORE`: the address the restore puts back - the same value as `param1`, which is
      *   where this action has always kept it, its `param2` being unused and 0.
+     * - `EXIT_RESTORE`: the exit code the exit replaced.
      * - `'0'` for `CONTROL_AND_STATUS_COUNTERS_DECREMENT`, `DO_NOTHING` and `POKE`, which replace
      *   no single value; a Poke reports both sides of everything it wrote through its own `writes`.
+     *   Also for `RANDOM_STREAM_RESTORE`, whose generator state is the simulator's own.
      */
     readonly oldValue: string;
     /**
@@ -407,9 +510,9 @@ interface JsBackStep {
      *
      * `CONTROL_AND_STATUS_REGISTER_BACKDOOR` is the simulator sampling the wall clock into `time`
      * rather than a program writing a register, but it is a write all the same and reports the
-     * millisecond reading it stored. `'0'` for `CONTROL_AND_STATUS_COUNTERS_DECREMENT` and
-     * `DO_NOTHING`, which write no value of their own, and for `POKE`, whose `writes` carry both
-     * sides already.
+     * millisecond reading it stored. `EXIT_RESTORE` reports the exit code the exit set. `'0'` for
+     * `CONTROL_AND_STATUS_COUNTERS_DECREMENT` and `DO_NOTHING`, which write no value of their own,
+     * for `POKE`, whose `writes` carry both sides already, and for `RANDOM_STREAM_RESTORE`.
      */
     readonly newValue: string;
     /**
@@ -469,6 +572,8 @@ type JsUndoGroup = JsInstructionUndoGroup | JsPokeUndoGroup;
  * overwrote, and the `cycle`/`instret` decrement every instruction pushes on top of them.
  */
 type JsInstructionUndoGroup = {
+    /** Opaque decimal identity, unique across Undo, initialize and reassembly in this module. */
+    readonly serial: string;
     readonly kind: 'instruction';
     readonly pc: number;
     /** The instruction's back steps, newest first. */
@@ -483,6 +588,8 @@ type JsInstructionUndoGroup = {
  * alone.
  */
 type JsPokeUndoGroup = {
+    /** Opaque decimal identity, unique across Undo, initialize and reassembly in this module. */
+    readonly serial: string;
     readonly kind: 'poke';
     readonly pc: -1;
     /** The single back step the Poke is: one slot of the history, whatever the Poke wrote. */
@@ -546,8 +653,13 @@ type HandlerName = keyof HandlerMap;
  * user, reading a file, awaiting a worker) without blocking the event loop. If the promise
  * rejects, the pending `step`/`simulate*` call rejects too.
  */
+type HandlerFn<K extends HandlerName> = (...args: HandlerMap[K]['in']) => HandlerMap[K]['out'] | Promise<HandlerMap[K]['out']>;
+/** The handlers a host may leave out: the simulator then does what RARS does on its own. */
+type OptionalHandlerName = 'randomSeed';
 type HandlerMapFns = {
-    [K in HandlerName]: (...args: HandlerMap[K]['in']) => HandlerMap[K]['out'] | Promise<HandlerMap[K]['out']>;
+    [K in Exclude<HandlerName, OptionalHandlerName>]: HandlerFn<K>;
+} & {
+    [K in OptionalHandlerName]?: HandlerFn<K>;
 };
 declare function registerHandlers(riscv: JsRiscV, handlers: HandlerMapFns): void;
 declare function unimplementedHandler(name: HandlerName): () => never;
@@ -560,23 +672,39 @@ interface JsRiscV {
      */
     assemble(): RISCVAssembleResult;
     /**
-     * Initializes the simulator.
+     * Initializes the simulator for a new run: the registers, the program counter, and the state
+     * of the run - not exited, exit code 0, no stop reason, and the random generators forgotten, so
+     * that each starts from a new seed on its first use. Assembling leaves the run state alone.
      * @param startAtMain If true, starts execution at the 'main' label. Otherwise, starts at the first instruction.
      */
     initialize(startAtMain: boolean): void;
     /**
-     * Gets the current stop reason.
+     * Why the last run call stopped: `NONE` when none has since the program was initialized, and
+     * `EXCEPTION` after one rejected with a `RuntimeError`. Undo does not change it; read
+     * `terminated` for whether the program can run.
      */
     getStopReason(): StopReason;
+    /**
+     * The program's exit code: exit2's (93) operand once it has run, 0 otherwise - after exit (10),
+     * after running off the end, while the program runs. `initialize` resets it to 0, and undoing
+     * the exit puts back the code before it.
+     */
+    readonly exitCode: number;
     /**
      * Executes a single instruction.
      *
-     * The promise settles on a microtask unless an IO handler returned a promise, in which case
-     * it settles once that handler and the rest of the instruction have finished.
+     * Resolves to why it stopped: `MAX_STEPS` normally, `NORMAL_TERMINATION` for an exit,
+     * `CLIFF_TERMINATION` when the instruction was the program's last (or there was none to run),
+     * `BREAKPOINT` for an `ebreak`. A program that has exited runs nothing more and resolves to
+     * `NORMAL_TERMINATION` again. Rejects with a `RuntimeError` when the program fails. The
+     * promise settles on a microtask unless an IO handler returned a promise, in which case it
+     * settles once that handler and the rest of the instruction have finished.
      */
     step(): Promise<StopReason>;
     /**
-     * Sets the size of the undo stack, must be called before assembling the program.
+     * Sets the maximum raw restore slots, before assembly. A Poke uses one slot; instructions
+     * use one slot per restore. Oldest instructions are evicted whole. An instruction larger
+     * than the capacity is discarded whole. Zero retains no history; negative sizes throw.
      * @param size
      */
     setUndoSize(size: number): void;
@@ -617,32 +745,45 @@ interface JsRiscV {
     getLabelAtAddress(address: number): string | null;
     /** Address of a defined label/alias, or -1 if absent. Requires successful assembly. */
     getAddressOfLabel(label: string): number;
+    /**
+     * Where the program's heap, and so the first block sbrk (9) hands out, starts. RARS's heap base,
+     * 0x10040000, unless the program is a `gnu-compiler-v1` Build whose static data (`.data`,
+     * `.rodata`, `.bss`, common symbols) reaches past it: then the heap starts at the first 4 KiB page
+     * after static data, where ld and a kernel put the break. A RARS-dialect program keeps the heap
+     * base whatever its size, as RARS does. Requires successful assembly; `initialize` empties the
+     * heap again.
+     */
+    getHeapStart(): number;
     /**
      * Sets whether the undo feature is enabled.
      * @param enabled True to enable the undo feature, false to disable it.
      */
     setUndoEnabled(enabled: boolean): void;
     /**
-     * Simulates until the stop condition is met. it might be a breakpoint, exception, etc...
+     * Simulates until the program stops: an exit, running off the end, an `ebreak`, or a failure,
+     * which rejects with a `RuntimeError`.
      */
     simulate(): Promise<StopReason>;
     /**
      * Simulates the program for a limited number of instructions.
      * @param limit The maximum number of instructions to execute.
-     * @returns A promise resolving to the reason the simulation stopped.
+     * @returns A promise resolving to the reason the simulation stopped (`MAX_STEPS` when the
+     * limit did), rejecting with a `RuntimeError` when the program fails.
      */
     simulateWithLimit(limit: number): Promise<StopReason>;
     /**
      * Simulates the program until a breakpoint is reached.
      * @param breakpoints An array of memory addresses where the simulation should pause.
-     * @returns A promise resolving to the reason the simulation stopped.
+     * @returns A promise resolving to the reason the simulation stopped, rejecting with a
+     * `RuntimeError` when the program fails.
      */
     simulateWithBreakpoints(breakpoints: number[]): Promise<StopReason>;
     /**
      * Simulates the program with both breakpoints and a limit.
      * @param breakpoints An array of memory addresses where the simulation should pause.
      * @param limit The maximum number of instructions to execute.
-     * @returns A promise resolving to the reason the simulation stopped.
+     * @returns A promise resolving to the reason the simulation stopped, rejecting with a
+     * `RuntimeError` when the program fails.
      */
     simulateWithBreakpointsAndLimit(breakpoints: number[], limit: number): Promise<StopReason>;
     /**
@@ -658,11 +799,12 @@ interface JsRiscV {
      */
     getRegisterValueLong(register: RegisterName): string;
     /**
-     * Registers a handler function for a specific event or condition.
+     * Registers a handler function for a specific event or condition. Handlers are shared by every
+     * `JsRiscV` instance. An optional handler (`randomSeed`) is removed by registering `undefined`.
      * @param name The name of the event or condition.
      * @param handler The handler function to be called when the event occurs. The function signature depends on the event name.
      */
-    registerHandler<T extends HandlerName>(name: T, handler: (...args: HandlerMap[T]['in']) => HandlerMap[T]['out'] | Promise<HandlerMap[T]['out']>): void;
+    registerHandler<T extends HandlerName>(name: T, handler: HandlerFn<T> | (T extends OptionalHandlerName ? undefined : never)): void;
     /**
      * Gets the current value of the stack pointer.
      * @returns The value of the stack pointer.
@@ -753,6 +895,15 @@ interface JsRiscV {
      * carries what it changed, with the old and the new value of each write.
      */
     getUndoGroups(): JsUndoGroup[];
+    /**
+     * The current dynamic instruction's serial, or null outside execution. Read it inside a host
+     * handler to journal an effect under the same identity its eventual Undo group carries. It
+     * remains stable while an async handler waits. Failures and exits have identities too.
+     * Serials are allocated even with Undo disabled; such runs retain no groups. Treat the decimal
+     * string as opaque (or compare with BigInt), never convert it to a JS number. Serials never
+     * rewind or alias after Undo, initialize or reassembly; initialize clears retained history.
+     */
+    getCurrentInstructionSerial(): string | null;
     /**
      * The newest `max` entries of `getUndoGroups`, read from the top of the history without
      * grouping the rest of it: what a panel showing the latest steps of a large history wants.
@@ -860,9 +1011,10 @@ interface JsRiscV {
     countMemoryObservers(): number;
     /**
      * Gets the next statement to be executed.
-     * @returns The next `JsProgramStatement`.
+     * @returns The next `JsProgramStatement`, or null once the program has ended (`terminated`):
+     * after an exit the statement that follows the ecall is not one the program will run.
      */
-    getNextStatement(): JsProgramStatement;
+    getNextStatement(): JsProgramStatement | null;
     /**
      * Sets the value of a register. Outside a Poke the write is direct: it records no undo step.
      * Inside a Poke it joins the open transaction, except for `zero`, which holds no value and so
@@ -872,10 +1024,12 @@ interface JsRiscV {
      */
     setRegisterValue(register: RegisterName, high: number, low: number): void;
     /**
-     * Checks if the simulation has terminated.
-     * @returns True if the simulation has terminated, false otherwise.
+     * Whether the program has ended, read from its state rather than from the last run call, so
+     * that it is right after `undo()` too: an exit service has run, or there is no statement at
+     * the program counter because execution ran off the end. It is true as soon as the last
+     * instruction has run. A runtime failure does not set it: the run call's rejection reports it.
      */
-    terminated: boolean;
+    readonly terminated: boolean;
 }
 /**
  * Creates a RISC-V simulator from a virtual source tree and its entry file.
@@ -900,4 +1054,4 @@ declare function bigintToHighLow(value: bigint): [high: number, low: number];
  */
 declare function highLowToBigint(high: number, low: number): bigint;
 
-export { type AssemblerProfile, type AssemblyOptions, BackStepAction, ConfirmResult, type CsrRegisterName, DialogType, type FloatingPointRegisterName, type GnuUnitSymbols, type HandlerMap, type HandlerMapFns, type JsBackStep, type JsInstruction, type JsInstructionToken, type JsInstructionUndoGroup, type JsPokeMemoryWrite, type JsPokeRegisterWrite, type JsPokeUndoGroup, type JsPokeWrite, type JsProgramStatement, type JsRiscV, type JsRiscVStackFrame, type JsUndoGroup, type MemoryAccessObserver, type MemoryObserverHandle, type MemoryWriteObserver, RISCV, type RISCVAssembleError, type RISCVAssembleResult, RISCVRegisters, type RISCVSourceLocation, type RISCVSourceSet, RISCV_CSR_REGISTERS, RISCV_FLOATING_POINT_REGISTERS, RISCV_REGISTERS, type RegisterName, type RiscvTokenizedLine, type RuntimeLibrary, StopReason, bigintToHighLow, highLowToBigint, makeRiscVFromFiles, registerHandlers, unimplementedHandler };
+export { type AssemblerProfile, type AssemblyOptions, BackStepAction, ConfirmResult, type CsrRegisterName, DialogType, type FloatingPointRegisterName, type GnuUnitSymbols, type HandlerMap, type HandlerMapFns, type JsBackStep, type JsInstruction, type JsInstructionToken, type JsInstructionUndoGroup, type JsPokeMemoryWrite, type JsPokeRegisterWrite, type JsPokeUndoGroup, type JsPokeWrite, type JsProgramStatement, type JsRiscV, type JsRiscVStackFrame, type JsUndoGroup, type MemoryAccessObserver, type MemoryObserverHandle, type MemoryWriteObserver, type OptionalHandlerName, RISCV, type RISCVAssembleError, type RISCVAssembleResult, RISCVRegisters, type RISCVSourceLocation, type RISCVSourceSet, RISCV_CSR_REGISTERS, RISCV_FLOATING_POINT_REGISTERS, RISCV_REGISTERS, type RegisterName, type RiscvTokenizedLine, type RuntimeError, type RuntimeErrorKind, type RuntimeLibrary, StopReason, bigintToHighLow, highLowToBigint, isRuntimeError, makeRiscVFromFiles, registerHandlers, unimplementedHandler };