@spcsn/taro 0.1.2 → 1.0.0

package/types/api/device/bluetooth-ble.d.ts

@@ -311,7 +311,7 @@ declare module '../../index' {
      * - 小程序不会对写入数据包大小做限制，但系统与蓝牙设备会限制蓝牙4.0单次传输的数据大小，超过最大字节数后会发生写入错误，建议每次写入不超过20字节。
      * - 若单次写入数据过长，iOS 上存在系统不会有任何回调的情况（包括错误回调）。
      * - 安卓平台上，在调用 `notifyBLECharacteristicValueChange` 成功后立即调用 `writeBLECharacteristicValue` 接口，在部分机型上会发生 10008 系统错误
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * // 向蓝牙设备发送一个0x00的16进制数据
@@ -342,7 +342,7 @@ declare module '../../index' {
      *
      * - 需在 Taro.createBLEConnection 调用成功后调用
      * - 仅安卓系统 5.1 以上版本有效，iOS 因系统限制不支持。
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-ble/wx.setBLEMTU.html
      */
     setBLEMTU(
@@ -354,7 +354,7 @@ declare module '../../index' {
      * **注意**
      * - 并行调用多次会存在读失败的可能性。
      * - 接口读取到的信息需要在 `onBLECharacteristicValueChange` 方法注册的回调中获取。
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * // 必须在这里的回调才能获取
@@ -395,7 +395,7 @@ declare module '../../index' {
     ): void
 
     /** 监听低功耗蓝牙连接状态的改变事件。包括开发者主动连接或断开连接，设备丢失，连接异常断开等等
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.onBLEConnectionStateChange(function (res) {
@@ -411,7 +411,7 @@ declare module '../../index' {
     ): void
 
     /** 监听低功耗蓝牙设备的特征值变化事件。必须先启用 `notifyBLECharacteristicValueChange` 接口才能接收到设备推送的 notification。
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * // ArrayBuffer转16进制字符串示例
@@ -446,7 +446,7 @@ declare module '../../index' {
     ): void
 
     /** 取消监听蓝牙低功耗连接状态的改变事件
-     * @supported weapp, alipay
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-ble/wx.offBLEConnectionStateChange.html
      */
     offBLEConnectionStateChange(
@@ -455,7 +455,7 @@ declare module '../../index' {
     ): void
 
     /** 取消监听蓝牙低功耗设备的特征值变化事件
-     * @supported weapp, alipay
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-ble/wx.offBLECharacteristicValueChange.html
      */
     offBLECharacteristicValueChange(
@@ -470,7 +470,7 @@ declare module '../../index' {
      * **注意**
      * - 订阅操作成功后需要设备主动更新特征值的 value，才会触发 Taro.onBLECharacteristicValueChange 回调。
      * - 安卓平台上，在调用 `notifyBLECharacteristicValueChange` 成功后立即调用 `writeBLECharacteristicValue` 接口，在部分机型上会发生 10008 系统错误
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.notifyBLECharacteristicValueChange({
@@ -497,7 +497,7 @@ declare module '../../index' {
      * 注意:
      *  - 小程序中 MTU 为 ATT_MTU，包含 Op-Code 和 Attribute Handle 的长度，实际可以传输的数据长度为 ATT_MTU - 3
      *  - iOS 系统中 MTU 为固定值；安卓系统中，MTU 会在系统协商成功之后发生改变，建议使用 [Taro.onBLEMTUChange](/docs/apis/device/bluetooth-ble/onBLEMTUChange) 监听。
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.getBLEMTU({
@@ -515,7 +515,7 @@ declare module '../../index' {
     ): Promise<getBLEMTU.SuccessCallbackResult>
 
     /** 获取蓝牙设备所有服务(service)。
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.getBLEDeviceServices({
@@ -533,7 +533,7 @@ declare module '../../index' {
     ): Promise<getBLEDeviceServices.SuccessCallbackResult>
 
     /** 获取蓝牙低功耗设备的信号强度 (Received Signal Strength Indication, RSSI)。
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-ble/wx.getBLEDeviceRSSI.html
      */
     getBLEDeviceRSSI(
@@ -541,7 +541,7 @@ declare module '../../index' {
     ): Promise<getBLEDeviceRSSI.SuccessCallbackResult>
 
     /** 获取蓝牙设备某个服务中所有特征值(characteristic)。
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.getBLEDeviceCharacteristics({
@@ -568,7 +568,7 @@ declare module '../../index' {
      * - 请保证尽量成对的调用 `createBLEConnection` 和 `closeBLEConnection` 接口。安卓如果多次调用 `createBLEConnection` 创建连接，有可能导致系统持有同一设备多个连接的实例，导致调用 `closeBLEConnection` 的时候并不能真正的断开与设备的连接。
      * - 蓝牙连接随时可能断开，建议监听 Taro.onBLEConnectionStateChange 回调事件，当蓝牙设备断开时按需执行重连操作
      * - 若对未连接的设备或已断开连接的设备调用数据读写操作的接口，会返回 10006 错误，建议进行重连操作。
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.createBLEConnection({
@@ -584,7 +584,7 @@ declare module '../../index' {
     createBLEConnection(option: createBLEConnection.Option): Promise<createBLEConnection.Promised>
 
     /** 断开与低功耗蓝牙设备的连接。
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.closeBLEConnection({

package/types/api/device/bluetooth-peripheral.d.ts

@@ -38,7 +38,7 @@ declare module '../../index' {
    */
   interface BLEPeripheralServer {
     /** 添加服务
-     * @supported weapp, jd
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-peripheral/BLEPeripheralServer.addService.html
      */
     addService(option: BLEPeripheralServer.addService.Option): Promise<TaroGeneral.BluetoothError>
@@ -48,7 +48,7 @@ declare module '../../index' {
      */
     close(option: BLEPeripheralServer.close.Option): Promise<TaroGeneral.BluetoothError>
     /** 取消监听已连接的设备请求读当前外围设备的特征值事件
-     * @supported weapp, jd
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-peripheral/BLEPeripheralServer.offCharacteristicReadRequest.html
      */
     offCharacteristicReadRequest(
@@ -56,7 +56,7 @@ declare module '../../index' {
       callback?: BLEPeripheralServer.onCharacteristicReadRequest.Callback,
     ): void
     /** 取消监听特征订阅事件
-     * @supported weapp, jd
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-peripheral/BLEPeripheralServer.offCharacteristicSubscribed.html
      */
     offCharacteristicSubscribed(
@@ -72,7 +72,7 @@ declare module '../../index' {
       callback?: BLEPeripheralServer.onCharacteristicUnsubscribed.Callback,
     ): void
     /** 取消监听已连接的设备请求写当前外围设备的特征值事件
-     * @supported weapp, jd
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-peripheral/BLEPeripheralServer.offCharacteristicWriteRequest.html
      */
     offCharacteristicWriteRequest(
@@ -82,7 +82,7 @@ declare module '../../index' {
     /** 监听已连接的设备请求读当前外围设备的特征值事件
      *
      * 收到该消息后需要立刻调用 [writeCharacteristicValue](/docs/apis/device/bluetooth-peripheral/BLEPeripheralServer#writecharacteristicvalue) 写回数据，否则主机不会收到响应。
-     * @supported weapp, jd
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-peripheral/BLEPeripheralServer.onCharacteristicReadRequest.html
      */
     onCharacteristicReadRequest(
@@ -90,7 +90,7 @@ declare module '../../index' {
       callback: BLEPeripheralServer.onCharacteristicReadRequest.Callback,
     ): void
     /** 监听特征订阅事件，仅 iOS 支持
-     * @supported weapp, jd
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-peripheral/BLEPeripheralServer.onCharacteristicSubscribed.html
      */
     onCharacteristicSubscribed(
@@ -98,7 +98,7 @@ declare module '../../index' {
       callback: BLEPeripheralServer.onCharacteristicSubscribed.Callback,
     ): void
     /** 监听取消特征订阅事件，仅 iOS 支持
-     * @supported weapp, jd
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-peripheral/BLEPeripheralServer.onCharacteristicUnsubscribed.html
      */
     onCharacteristicUnsubscribed(
@@ -106,7 +106,7 @@ declare module '../../index' {
       callback: BLEPeripheralServer.onCharacteristicUnsubscribed.Callback,
     ): void
     /** 监听已连接的设备请求写当前外围设备的特征值事件
-     * @supported weapp, jd
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-peripheral/BLEPeripheralServer.onCharacteristicWriteRequest.html
      */
     onCharacteristicWriteRequest(
@@ -114,22 +114,22 @@ declare module '../../index' {
       callback: BLEPeripheralServer.onCharacteristicWriteRequest.Callback,
     ): void
     /** 移除服务
-     * @supported weapp, jd
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-peripheral/BLEPeripheralServer.removeService.html
      */
     removeService(option: BLEPeripheralServer.removeService.Option): Promise<TaroGeneral.BluetoothError>
     /** 开始广播本地创建的外围设备
-     * @supported weapp, jd
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-peripheral/BLEPeripheralServer.startAdvertising.html
      */
     startAdvertising(option: BLEPeripheralServer.startAdvertising.Option): Promise<TaroGeneral.BluetoothError>
     /** 停止广播
-     * @supported weapp, jd
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-peripheral/BLEPeripheralServer.stopAdvertising.html
      */
     stopAdvertising(option: BLEPeripheralServer.stopAdvertising.Option): Promise<TaroGeneral.BluetoothError>
     /** 往指定特征写入二进制数据值，并通知已连接的主机，从机的特征值已发生变化，该接口会处理是走回包还是走订阅
-     * @supported weapp, jd
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-peripheral/BLEPeripheralServer.writeCharacteristicValue.html
      */
     writeCharacteristicValue(option: BLEPeripheralServer.writeCharacteristicValue.Option): Promise<TaroGeneral.BluetoothError>
@@ -402,7 +402,7 @@ declare module '../../index' {
 
   interface TaroStatic {
     /** 监听当前外围设备被连接或断开连接事件
-     * @supported weapp, jd
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-peripheral/wx.onBLEPeripheralConnectionStateChanged.html
      */
     onBLEPeripheralConnectionStateChanged(
@@ -411,7 +411,7 @@ declare module '../../index' {
     ): void
 
     /** 取消监听当前外围设备被连接或断开连接事件
-     * @supported weapp, jd
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-peripheral/wx.offBLEPeripheralConnectionStateChanged.html
      */
      offBLEPeripheralConnectionStateChanged(
@@ -420,7 +420,7 @@ declare module '../../index' {
     ): void
 
     /** 建立本地作为蓝牙低功耗外围设备的服务端，可创建多个
-     * @supported weapp, jd
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth-peripheral/wx.createBLEPeripheralServer.html
      */
      createBLEPeripheralServer(

package/types/api/device/bluetooth.d.ts

@@ -253,7 +253,7 @@ declare module '../../index' {
 
   interface TaroStatic {
     /** 停止搜寻附近的蓝牙外围设备。若已经找到需要的蓝牙设备并不需要继续搜索时，建议调用该接口停止蓝牙搜索。
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.stopBluetoothDevicesDiscovery({
@@ -269,7 +269,7 @@ declare module '../../index' {
     ): Promise<stopBluetoothDevicesDiscovery.Promised>
 
     /** 开始搜寻附近的蓝牙外围设备。**此操作比较耗费系统资源，请在搜索并连接到设备后调用 Taro.stopBluetoothDevicesDiscovery 方法停止搜索。**
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * // 以微信硬件平台的蓝牙智能灯为例，主服务的 UUID 是 FEE7。传入这个参数，只搜索主服务 UUID 为 FEE7 的设备
@@ -291,7 +291,7 @@ declare module '../../index' {
      * **注意**
      * - 其他蓝牙相关 API 必须在 Taro.openBluetoothAdapter 调用之后使用。否则 API 会返回错误（errCode=10000）。
      * - 在用户蓝牙开关未开启或者手机不支持蓝牙功能的情况下，调用 Taro.openBluetoothAdapter 监听手机蓝牙状态的改变，也可以调用蓝牙模块的所有API。
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.openBluetoothAdapter({
@@ -309,7 +309,7 @@ declare module '../../index' {
      * **注意**
      * - 若在 Taro.onBluetoothDeviceFound 回调了某个设备，则此设备会添加到 Taro.getBluetoothDevices 接口获取到的数组中。
      * - 安卓下部分机型需要有位置权限才能搜索到设备，需留意是否开启了位置权限
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * // ArrayBuffer转16进度字符串示例
@@ -337,7 +337,7 @@ declare module '../../index' {
     ): void
 
     /** 监听蓝牙适配器状态变化事件
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.onBluetoothAdapterStateChange(function (res) {
@@ -352,7 +352,7 @@ declare module '../../index' {
     ): void
 
     /** 取消监听寻找到新设备的事件
-     * @supported weapp, alipay
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth/wx.offBluetoothDeviceFound.html
      */
     offBluetoothDeviceFound(
@@ -361,7 +361,7 @@ declare module '../../index' {
     ): void
   
     /** 取消监听蓝牙适配器状态变化事件
-     * @supported weapp, alipay
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/bluetooth/wx.offBluetoothAdapterStateChange.html
      */
     offBluetoothAdapterStateChange(
@@ -384,7 +384,7 @@ declare module '../../index' {
     isBluetoothDevicePaired(option: isBluetoothDevicePaired.Option): Promise<TaroGeneral.CallbackResult>
 
     /** 根据 uuid 获取处于已连接状态的设备。
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.getConnectedBluetoothDevices({
@@ -404,7 +404,7 @@ declare module '../../index' {
      * **注意事项**
      * - 该接口获取到的设备列表为**蓝牙模块生效期间所有搜索到的蓝牙设备**，若在蓝牙模块使用流程结束后未及时调用 Taro.closeBluetoothAdapter 释放资源，会存在调用该接口会返回之前的蓝牙使用流程中搜索到的蓝牙设备，可能设备已经不在用户身边，无法连接。
      * - 蓝牙设备在被搜索到时，系统返回的 name 字段一般为广播包中的 LocalName 字段中的设备名称，而如果与蓝牙设备建立连接，系统返回的 name 字段会改为从蓝牙设备上获取到的 `GattName`。若需要动态改变设备名称并展示，建议使用 `localName` 字段。
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * // ArrayBuffer转16进度字符串示例
@@ -431,7 +431,7 @@ declare module '../../index' {
     getBluetoothDevices(option?: getBluetoothDevices.Option): Promise<getBluetoothDevices.SuccessCallbackResult>
 
     /** 获取本机蓝牙适配器状态。
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.getBluetoothAdapterState({
@@ -447,7 +447,7 @@ declare module '../../index' {
     ): Promise<getBluetoothAdapterState.SuccessCallbackResult>
 
     /** 关闭蓝牙模块。调用该方法将断开所有已建立的连接并释放系统资源。建议在使用蓝牙流程后，与 Taro.openBluetoothAdapter 成对调用。
-     * @supported weapp, alipay, jd
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.closeBluetoothAdapter({

package/types/api/device/calendar.d.ts

@@ -85,12 +85,12 @@ declare module '../../index' {
 
   interface TaroStatic {
     /** 向系统日历添加重复事件
-     * @supported weapp, h5
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/calendar/wx.addPhoneRepeatCalendar.html
      */
     addPhoneRepeatCalendar(option: addPhoneRepeatCalendar.Option): Promise<TaroGeneral.CallbackResult>
     /** 向系统日历添加事件
-     * @supported weapp, tt, h5
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/calendar/wx.addPhoneCalendar.html
      */
     addPhoneCalendar(option: addPhoneCalendar.Option): Promise<TaroGeneral.CallbackResult>

package/types/api/device/clipboard.d.ts

@@ -43,8 +43,7 @@ declare module '../../index' {
 
   interface TaroStatic {
     /** 设置系统剪贴板的内容。调用成功后，会弹出 toast 提示"内容已复制"，持续 1.5s
-     * @supported weapp, swan, jd, qq, tt, h5, rn, harmony, harmony_hybrid
-     * @h5 部分实现
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.setClipboardData({
@@ -64,8 +63,7 @@ declare module '../../index' {
 
     /**
      * 获取系统剪贴板内容
-     * @supported weapp, swan, jd, qq, tt, h5, rn, harmony, harmony_hybrid
-     * @h5 部分实现
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.getClipboardData({

package/types/api/device/compass.d.ts

@@ -59,7 +59,7 @@ declare module '../../index' {
 
   interface TaroStatic {
     /** 停止监听罗盘数据
-     * @supported weapp, swan, qq, h5, tt
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.stopCompass()
@@ -69,7 +69,7 @@ declare module '../../index' {
     stopCompass(option?: stopCompass.Option): Promise<TaroGeneral.CallbackResult>
 
     /** 开始监听罗盘数据
-     * @supported weapp, swan, qq, h5, tt
+     * @supported weapp
      * @example
      * ```js
      * Taro.startCompass()
@@ -79,7 +79,7 @@ declare module '../../index' {
     startCompass(option?: startCompass.Option): Promise<TaroGeneral.CallbackResult>
 
     /** 监听罗盘数据变化事件。频率：5 次/秒，接口调用后会自动开始监听，可使用 Taro.stopCompass 停止监听。
-     * @supported weapp, swan, qq, h5, tt
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.onCompassChange(function (res) {
@@ -94,7 +94,7 @@ declare module '../../index' {
     ): void
 
     /** 取消监听罗盘数据变化事件，参数为空，则取消所有的事件监听。
-     * @supported weapp, swan, qq, h5
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/compass/wx.offCompassChange.html
      */
     offCompassChange(

package/types/api/device/gyroscope.d.ts

@@ -53,19 +53,19 @@ declare module '../../index' {
 
   interface TaroStatic {
     /** 停止监听陀螺仪数据。
-     * @supported weapp, alipay, swan, jd, qq, tt, rn
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/gyroscope/wx.stopGyroscope.html
      */
     stopGyroscope(option?: stopGyroscope.Option): Promise<TaroGeneral.CallbackResult>
 
     /** 开始监听陀螺仪数据。
-     * @supported weapp, rn, tt
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/gyroscope/wx.startGyroscope.html
      */
     startGyroscope(option: startGyroscope.Option): Promise<TaroGeneral.CallbackResult>
 
     /** 监听陀螺仪数据变化事件。频率根据 Taro.startGyroscope() 的 interval 参数。可以使用 Taro.stopGyroscope() 停止监听。
-     * @supported weapp, alipay, swan, jd, qq, tt, rn
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/gyroscope/wx.onGyroscopeChange.html
      */
     onGyroscopeChange(
@@ -74,7 +74,7 @@ declare module '../../index' {
     ): void
 
     /** 取消监听陀螺仪数据变化事件。
-     * @supported weapp, alipay, swan, jd, tt, rn
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/gyroscope/wx.offGyroscopeChange.html
      */
     offGyroscopeChange(

package/types/api/device/iBeacon.d.ts

@@ -102,7 +102,7 @@ declare module '../../index' {
 
   interface TaroStatic {
     /** 停止搜索附近的 iBeacon 设备
-     * @supported weapp, alipay
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.stopBeaconDiscovery(params).then(...)
@@ -112,7 +112,7 @@ declare module '../../index' {
     stopBeaconDiscovery(option?: stopBeaconDiscovery.Option): Promise<TaroGeneral.IBeaconError>
 
     /** 开始搜索附近的 iBeacon 设备
-     * @supported weapp, alipay
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.startBeaconDiscovery({
@@ -124,7 +124,7 @@ declare module '../../index' {
     startBeaconDiscovery(option: startBeaconDiscovery.Option): Promise<TaroGeneral.IBeaconError>
 
     /** 监听 iBeacon 设备更新事件，仅能注册一个监听
-     * @supported weapp, alipay
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/ibeacon/wx.onBeaconUpdate.html
      */
     onBeaconUpdate(
@@ -133,7 +133,7 @@ declare module '../../index' {
     ): void
 
     /** 监听 iBeacon 服务状态变化事件，仅能注册一个监听
-     * @supported weapp, alipay
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/ibeacon/wx.onBeaconServiceChange.html
      */
     onBeaconServiceChange(
@@ -142,7 +142,7 @@ declare module '../../index' {
     ): void
 
     /** 取消监听 iBeacon 设备更新事件
-     * @supported weapp, alipay
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/ibeacon/wx.offBeaconUpdate.html
      */
     offBeaconUpdate(
@@ -151,7 +151,7 @@ declare module '../../index' {
     ): void
 
     /** 取消监听 iBeacon 服务状态变化事件
-     * @supported weapp, alipay
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/ibeacon/wx.offBeaconServiceChange.html
      */
     offBeaconServiceChange(
@@ -160,7 +160,7 @@ declare module '../../index' {
     ): void
 
     /** 获取所有已搜索到的 iBeacon 设备
-     * @supported weapp, alipay
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/ibeacon/wx.getBeacons.html
      */
     getBeacons(option?: getBeacons.Option): Promise<getBeacons.CallbackResult>

package/types/api/device/keyboard.d.ts

@@ -43,7 +43,7 @@ declare module '../../index' {
 
   interface TaroStatic {
     /** 在input、textarea等focus拉起键盘之后，手动调用此接口收起键盘
-     * @supported weapp, alipay, swan, jd, tt, rn, harmony_hybrid, harmony
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.hideKeyboard({
@@ -71,7 +71,7 @@ declare module '../../index' {
     getSelectedTextRange(option?: getSelectedTextRange.Option): Promise<getSelectedTextRange.SuccessCallbackResult>
 
     /** 监听键盘高度变化
-     * @supported weapp, swan, jd, qq, rn, harmony
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.onKeyboardHeightChange(res => {
@@ -86,7 +86,7 @@ declare module '../../index' {
 
     /**
      * 取消监听键盘高度变化事件。
-     * @supported weapp, swan, jd, rn, harmony
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/keyboard/wx.offKeyboardHeightChange.html
      */
     offKeyboardHeightChange(

package/types/api/device/memory.d.ts

@@ -26,7 +26,7 @@ declare module '../../index' {
     /** 监听内存不足告警事件。
      *
      * 当 iOS/Android 向小程序进程发出内存警告时，触发该事件。触发该事件不意味小程序被杀，大部分情况下仅仅是告警，开发者可在收到通知后回收一些不必要资源避免进一步加剧内存紧张。
-     * @supported weapp, alipay, swan, jd, tt, harmony
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.onMemoryWarning(function () {
@@ -41,7 +41,7 @@ declare module '../../index' {
     ): void
 
     /** 取消监听内存不足告警事件。
-     * @supported weapp, alipay, swan, harmony
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/memory/wx.offMemoryWarning.html
      */
     offMemoryWarning(

package/types/api/device/motion.d.ts

@@ -51,7 +51,7 @@ declare module '../../index' {
 
   interface TaroStatic {
     /** 开始监听设备方向的变化。
-     * @supported weapp, swan, jd, h5, rn
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/motion/wx.startDeviceMotionListening.html
      */
     startDeviceMotionListening(
@@ -60,7 +60,7 @@ declare module '../../index' {
 
     /**
      * 停止监听设备方向的变化。
-     * @supported weapp, swan, jd, h5, rn
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/motion/wx.stopDeviceMotionListening.html
      */
     stopDeviceMotionListening(
@@ -69,7 +69,7 @@ declare module '../../index' {
 
     /**
      * 监听设备方向变化事件。频率根据 Taro.startDeviceMotionListening() 的 interval 参数。可以使用 Taro.stopDeviceMotionListening() 停止监听。
-     * @supported weapp, alipay, swan, jd, h5, rn
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/motion/wx.onDeviceMotionChange.html
      */
     onDeviceMotionChange(
@@ -77,7 +77,7 @@ declare module '../../index' {
     ): void
 
     /** 取消监听设备方向变化事件，参数为空，则取消所有的事件监听。
-     * @supported weapp, alipay, swan, jd, h5, rn
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/motion/wx.offDeviceMotionChange.html
      */
     offDeviceMotionChange(

package/types/api/device/network.d.ts

@@ -89,25 +89,10 @@ declare module '../../index' {
 
   interface TaroStatic {
     /** 监听弱网状态变化事件
-     * @supported weapp, swan, qq, tt
-     * @example
-     * ```tsx
-     * Taro.onNetworkWeakChange(function (res) {
-     *   console.log(res.weakNet)
-     *   console.log(res.networkType)
-     * })
-     * // 取消监听
-     * Taro.offNetworkWeakChange()
-     * ```
-     * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/network/wx.onNetworkWeakChange.html
-     */
-    onNetworkWeakChange(
-      /** 弱网状态变化事件的回调函数 */
-      callback: onNetworkWeakChange.Callback,
-    ): void
+     * @supported weapp
 
     /** 监听网络状态变化。
-     * @supported weapp, swan, h5, rn, tt, harmony, harmony_hybrid
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.onNetworkStatusChange(function (res) {
@@ -123,7 +108,7 @@ declare module '../../index' {
     ): void
 
     /** 取消监听弱网状态变化事件
-     * @supported weapp, swan
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/network/wx.offNetworkWeakChange.html
      */
     offNetworkWeakChange(
@@ -132,7 +117,7 @@ declare module '../../index' {
     ): void
 
     /** 取消监听网络状态变化事件，参数为空，则取消所有的事件监听。
-     * @supported weapp, swan, h5, rn, harmony, harmony_hybrid
+     * @supported weapp
      * @see https://developers.weixin.qq.com/miniprogram/dev/api/device/network/wx.offNetworkStatusChange.html
      */
     offNetworkStatusChange(
@@ -141,7 +126,7 @@ declare module '../../index' {
     ): void
 
     /** 获取网络类型。
-     * @supported weapp, swan, qq, h5, rn, tt, harmony, harmony_hybrid
+     * @supported weapp
      * @example
      * ```tsx
      * Taro.getNetworkType({