@spardutti/claude-skills 2.25.0 → 2.25.2

package/README.md

@@ -1,22 +1,31 @@
 # Claude Skills
 
-> **Make Claude Code write like a senior engineer who actually keeps up.**
+Guardrails for Claude Code — best-practice skills, planning commands, and delivery gates.
 
 [![npm version](https://img.shields.io/npm/v/@spardutti/claude-skills)](https://www.npmjs.com/package/@spardutti/claude-skills)
 [![npm downloads](https://img.shields.io/npm/dm/@spardutti/claude-skills)](https://www.npmjs.com/package/@spardutti/claude-skills)
 [![license](https://img.shields.io/npm/l/@spardutti/claude-skills)](./LICENSE)
 
-Opinionated, always-current best-practice playbooks that load while Claude codes — so it writes today's idioms for the tools you actually use, not the averaged, two-years-stale code its training defaults to. This repo is the source catalog; the CLI installs exactly what each project needs from an interactive menu, pulling in any subagents your chosen commands depend on.
+Coding agents are good at writing code. They are much worse at holding to
+engineering discipline — reading the codebase before changing it, keeping to
+current idioms, proving a test would actually catch a break.
 
-## Why This Exists
-
-Coding agents don't fail because they can't code — they fail because they write **dated** code. A model's knowledge is frozen and averaged: ask for React and it reaches for `useEffect` and manual `useMemo`; ask for TypeScript and it assumes 5.x; it defaults to patterns that were fine two years ago and are wrong today.
-
-The ecosystem's answer has been **process** — planning frameworks, spec-driven workflows, agent orchestration. Those steer *how* the agent works. None of them fix *what the code looks like*.
+This installs both halves into your project: **current technical guidance**, and
+**the enforcement that makes it stick**. Guidance your agent can skip is a
+suggestion. Every skill here loads behind a hook that requires it to be applied,
+and nothing reaches a PR without passing a gate that ran for real.
 
-**This is the other half.** Each skill is a tight, opinionated playbook that pins Claude to current, senior-level practice for one tool — React 19.2 + the React Compiler, TypeScript 7.0, TanStack Query v5, Drizzle, FastAPI, SQL. Claude loads only the skills a task touches, so many can stay installed cheaply. Bring whatever planning framework you like on top; this makes sure the code that comes out isn't 2023-vintage.
+## Contents
 
-**Freshness is the feature.** These track the changelogs as the tools move — the React Compiler going stable, TS 7.0's native compiler, Drizzle Relations v2 — so you don't have to.
+- [Quick Start](#quick-start)
+- [Why This Exists](#why-this-exists)
+- [Skill Catalog](#skill-catalog)
+- [Commands](#commands)
+- [How It Works](#how-it-works)
+- [Hooks & Internals](./HOOKS.md)
+- [Repository Layout](#repository-layout)
+- [Getting Help](#getting-help)
+- [Contributing](#contributing)
 
 ## Quick Start
 
@@ -27,7 +36,7 @@ npx @spardutti/claude-skills
 ```
 
 ```text
-  Claude Skills Installer v2.6.0
+  Claude Skills Installer v2.25.0
 
   ── Frontend ──────────────────────────────
   ◉ react              ◯ tanstack-query
@@ -47,11 +56,33 @@ The CLI will:
 2. Let you pick skills to install → `.claude/skills/`
 3. Let you pick commands to install → `.claude/commands/`
 4. Auto-install any subagents the selected commands declare → `.claude/agents/`
-5. Optionally set up the **hooks** — skill evaluation before edits, verification after (recommended — see [How It Works](#how-it-works))
+5. Optionally set up the **hooks** — skill evaluation before edits, verification after (recommended)
+
+## Why This Exists
+
+**A model's knowledge is frozen and averaged.** Ask for React and it reaches for
+`useEffect` and manual `useMemo`. Ask for TypeScript and it assumes 5.x. The code
+compiles, passes review, and is two years out of date. Skills fix that: tight,
+opinionated playbooks pinned to current practice for one tool each — React 19.2 and
+the Compiler, TypeScript 7.0, TanStack Query v5, Drizzle, FastAPI, SQL. They track
+the changelogs so you don't.
+
+**But guidance nobody checks is a suggestion.** An agent under deadline pressure
+skips the playbook, writes the test after the code, and reports a pass. So the same
+install adds the part that does not negotiate:
+
+- A gate that blocks the first edit until your skills have been applied to the file
+  being written — not just read.
+- A `Stop` hook that runs your typecheck and tests on the changed files every turn,
+  and refuses to let the turn end red.
+- A delivery gate that **changes your code on purpose and checks whether any test
+  notices.** When none do, the PR does not open.
+
+That last one is the difference. Your agent says the tests pass. This finds out.
 
 ## Skill Catalog
 
-**14 skills**, grouped the same way the installer presents them.
+**16 skills**, grouped the same way the installer presents them.
 
 > [!NOTE]
 > Skills marked **📦 Bundle** ship a concise always-loaded entry point plus reference files Claude reads only when a task needs them — comprehensive coverage at a low context cost.
@@ -91,7 +122,7 @@ Cross-cutting craft — applies to any stack, any language.
 | `git-merge-conflicts` | Resolve a merge/rebase conflict by intent, not by side — `zdiff3` to see the merge base, the inverted meaning of `ours`/`theirs` during a rebase, the semantic and tree conflicts git never marks, lockfiles and migrations you regenerate instead of merging |
 | `research` | Open the source, don't recall it — route to the tool that owns the answer, primary sources only, pin the version you're actually on, run the validator instead of guessing, and mark every claim VERIFIED / INFERRED / UNVERIFIED |
 | `typescript-best-practices` | TypeScript 7.x — type design, generics, type guards, `satisfies`, `using`, error handling, `tsconfig` |
-| `testing-best-practices` 📦 | Arrange-Act-Assert, factory-based test data, isolation, mocking boundaries, a pyramid-balanced suite; bundle covers mutation testing — Stryker and mutmut setup, diff-scoped runs, the traps, and working score thresholds |
+| `testing-best-practices` 📦 | Arrange-Act-Assert, factory-based test data, isolation, mocking boundaries, a pyramid-balanced suite; bundle covers mutation testing — Stryker and mutmut setup, `ignoreStatic`, diff-scoped runs, the traps, and working score thresholds |
 | `security-practices` | OWASP Top 10 prevention, input validation, auth, SQL injection, XSS, CSRF, secure defaults |
 
 ## Commands
@@ -106,8 +137,8 @@ Portable slash commands installed to `.claude/commands/`. Some orchestrate paral
 | `/refactor` | Detect size / complexity / duplication / coupling issues via 4 parallel subagents, then refactor |
 | `/deep-review` | Multi-agent deep code review — 5 parallel subagents catch guard bypasses, lost async state, wrong-table queries, dead references, protocol violations |
 | `/test-review` | Write-then-verify test review — scopes to the diff, runs red-green + mutation gates, then an isolated read-only subagent proves each test would catch a regression instead of rubber-stamping it |
+| `/handoff` | Write a handoff doc so a fresh session picks the work up — captures what auto-compaction loses: decisions made and rejected, dead ends already ruled out, why the tree is dirty, and the one next step |
 | `/lockdown` | Per-repo supply-chain hardening — detects the package managers, Dockerfiles, and CI in use, then guides you through and applies install-time, deploy, and pipeline hardening for npm/pnpm, pip/uv, Docker, and GitHub Actions |
-| `/handoff` | Write a handoff doc so a fresh session picks the work up — captures what auto-compaction loses: decisions made and rejected, dead ends already ruled out, why the tree is dirty, and the one next step. Links to specs, commits, and PRs instead of restating them |
 
 ## How It Works
 
@@ -117,239 +148,35 @@ The CLI installs three kinds of artifact into your project's `.claude/` director
 - **Commands** → `.claude/commands/` — slash commands you invoke directly.
 - **Subagents** → `.claude/agents/` — declared by commands via `requires-agents`, installed for you.
 
+It then offers to install the hooks. Two guard the **front**: nothing is written
+until your skills have been evaluated *and* applied to the file being written.
+Two guard the **back**: a `Stop` hook runs your typecheck and tests on the changed
+files every turn, and a `PreToolUse` gate refuses to open or merge a PR without a
+receipt proving the delivery gate passed on exactly that code.
+
+Full details — every hook, every marker, every config key, and what to do when one
+blocks something it shouldn't — are in **[HOOKS.md](./HOOKS.md)**.
+
 ### Tracking & Updates
 
 Every install writes a manifest at `.claude/.claude-skills.json` recording what the CLI installed and the catalog version. On the next run it uses the manifest to:
 
 - **Pre-check what you already have** in the picker — re-running doubles as an update screen; toggle to add or remove.
-- **Detect stale items** — skills/commands renamed or removed from the catalog upstream (e.g. when several skills are merged into a bundle) are flagged, and the CLI offers to delete them.
+- **Detect stale items** — skills/commands renamed or removed from the catalog upstream are flagged, and the CLI offers to delete them.
 - **Never touch what it didn't install** — the manifest is the CLI's own record; hand-written skills are invisible to it and always safe.
 
 ```bash
 npx @spardutti/claude-skills --sync
 ```
 
-`--local[=path]` reads the catalog from a working copy instead of GitHub, so an unreleased
-change can be installed and tried without publishing it first:
-
-```bash
-node ~/projects/claude-skills/cli/bin/cli.mjs --local
-```
-
 `--sync` refreshes every tracked item to the latest catalog and prunes stale ones in one shot — no menu. For a project that predates the manifest, the first normal run offers a one-time cleanup of `.claude/` content no longer in the catalog.
 
-### Automatic Skill Evaluation
-
-After installing skills, the CLI offers to set up a hook that **guarantees** Claude evaluates your skills before writing code — instead of a soft reminder it can ignore.
-
-It installs four hooks and appends a rule to your `CLAUDE.md`. Three guard the
-**front** — nothing is written until your skills are considered:
-
-- `skill-gate.sh` — a `PreToolUse` gate on `Write|Edit|MultiEdit|Bash`
-- `skill-application-gate.sh` — a second `PreToolUse` gate requiring each loaded skill to be applied, not just read
-
-Both cover **Bash**, not only the file-writing tools. A session that edits through
-`python3 - <<'PY'` in Bash walked past the old matcher entirely — twelve source files, not
-one prompt — and some harnesses actively tell the model to prefer Bash for edits. Only
-commands that can write are gated (a redirect, `tee`, `sed -i`, `cp`/`mv`, or an
-interpreter given inline code or a heredoc); `git status` and a redirect to `/dev/null`
-pass untouched, and the command that clears the gate is never gated against itself.
-
-Neither gate fires on **prose** — `.md`, `.mdx`, `.txt`, `.rst`, `.adoc`, images. Skills
-are about code, and a repo full of `PLAN_*.md` otherwise hits the gate on every write.
-Config files (`.json`, `.yml`, `.toml`) stay gated, because skills do have rules about
-`tsconfig`, `package.json`, and Compose.
-- `skill-gate-automark.sh` — a `PostToolUse` hook on `Skill` that clears the gate
-
-The last two guard the **back** — nothing finishes or ships until the code passes:
-
-- `gauntlet.sh` — a `Stop` hook running the fast gates on your changed files (see [Automatic Verification](#automatic-verification-gauntlet))
-- `ship-gate-hook.sh` — a `PreToolUse` gate on `Bash` that refuses `git commit` and `git push` without a receipt from `ship-gate.sh`
-
-One more hook stays out of the way entirely:
-
-- `version-check.sh` — a `SessionStart` hook that mentions a newer catalog at most once a day. It never touches the network in the foreground: it reads a cache the previous session refreshed in the background, so it costs a file read. Silent when there is no cache, no network, or nothing new. `CLAUDE_SKILLS_NO_VERSION_CHECK=1` turns it off.
-
-<details>
-<summary>How the gate works</summary>
-
-The gate hard-blocks `Write`, `Edit`, and `MultiEdit` until a per-session marker exists at `/tmp/claude-skill-gate-<SESSION_ID>`. The marker is created automatically the first time Claude invokes any `Skill()` in the session — so the normal flow is: Claude lists skills as ACTIVATE/SKIP, calls `Skill()` for the ACTIVATE ones, and the gate clears for the rest of the session. If every skill is SKIP, Claude clears the gate with `touch /tmp/claude-skill-gate-<SESSION_ID>`.
-
-The marker is **per-session, not per-turn** — short follow-ups like "yes" don't re-lock it. The gate auto-passes when a project has no `.claude/skills/*/SKILL.md`, so it's safe to leave on globally.
-
-It registers in `.claude/settings.json`:
-
-```json
-{
-  "hooks": {
-    "PreToolUse": [
-      { "matcher": "Write|Edit|MultiEdit|Bash", "hooks": [
-        { "type": "command", "command": "$CLAUDE_PROJECT_DIR/.claude/hooks/skill-gate.sh" } ] },
-      { "matcher": "Write|Edit|MultiEdit|Bash", "hooks": [
-        { "type": "command", "command": "$CLAUDE_PROJECT_DIR/.claude/hooks/skill-application-gate.sh" } ] }
-    ],
-    "PostToolUse": [
-      { "matcher": "Skill", "hooks": [
-        { "type": "command", "command": "$CLAUDE_PROJECT_DIR/.claude/hooks/skill-gate-automark.sh" } ] }
-    ]
-  }
-}
-```
-
-</details>
-
-### Automatic Verification (Gauntlet)
-
-The same install adds `gauntlet.sh` — a `Stop` hook that runs the cheap, deterministic
-gates on your changed files every time Claude finishes a turn. Green is silent; red exits 2,
-which keeps the turn from ending, shows you the failure, and hands it to Claude to fix.
-
-Exit 2 matters: `{"decision":"continue"}` also keeps the turn going, but its reason reaches
-Claude alone. A failing gate was then invisible from the outside — indistinguishable from a
-gauntlet that does nothing.
-
-Keep the gates fast for a reason beyond patience: a `command` hook that reaches its timeout
-(600s by default) is cancelled and its **output discarded**, so the turn ends as if the hook
-never ran. A stalled gate is a silent pass, not a block.
-
-Only fast gates live here (target: under ~30s). Mutation testing and deep review stay
-manual — they belong to `/test-review` and `/deep-review`, not to every turn.
-
-At install time the CLI reports what it found, so a silent no-op is never a surprise:
-
-```text
-Gauntlet detected tsc + vitest — it will run those on changed files.
-```
-
-If no test runner is detected it says so, and offers to write a `.claude/gauntlet.conf`
-pointing at your test command. Detection covers vitest, jest, pytest, `tsc`, and `mypy`;
-everything else needs that one config line.
-
-<details>
-<summary>How the gauntlet hook works</summary>
-
-It runs a skip ladder first, cheapest check first, and quits at the first "no":
-
-1. no changed files (planning turns, questions)
-2. no changed **code** files (docs/config only)
-3. this exact diff already passed — the hash of a green run is cached per session and repo
-4. no gates detected for this repo
-
-Rule 3 is what makes repeated `/ship` runs free: the gates run once per distinct diff.
-
-To confirm it is alive when everything is green — green prints nothing, by design:
+`--local[=path]` reads the catalog from a working copy instead of GitHub, so an unreleased change can be installed and tried without publishing it first:
 
 ```bash
-ls -t /tmp/claude-gauntlet-*.why | head -1 | xargs cat
-```
-
-Every run records why it ended in `/tmp/claude-gauntlet-<session>.why`, so a green run
-and a skipped one are told apart without re-running the hook. `GAUNTLET_DEBUG=1` prints
-the same line to stderr:
-
-```text
-gauntlet: green: gates passed
-gauntlet: skipped: no changed code files (docs/config only)
-gauntlet: green: gates passed, but the runner matched 0 test files — the changed code was never executed
-```
-
-That last one is the false green worth knowing about. A test runner given files it has no
-tests for exits 0 and looks exactly like a pass — in a monorepo whose vitest workspace
-excludes a package, **no** change in that package can ever be covered. The hook names it
-instead of reporting green. Set `GAUNTLET_REQUIRE_TESTS=1` to make it block instead.
-
-The stack is auto-detected: vitest / jest / pytest for tests, and for typechecking the
-repo's own `typecheck` script if it has one, else bare `tsc --noEmit` or `mypy`. The script
-is preferred because a workspace root `tsconfig.json` is often solution-style, where
-`tsc --noEmit` does not mean what the repo's `tsc -b` means.
-
-**Monorepos work, including the ones with nothing at the root.** Detection collects every
-gate it finds rather than stopping at the first, and each gate carries the file pattern it
-applies to — so a JS + Python repo gets four gates, and a turn that touched only `.py` files
-runs the Python two and skips the JS two entirely. Typechecks always run before tests, and
-the first red stops the rest.
-
-When the root has no manifest, detection looks two levels down for `package.json` /
-`pyproject.toml` / `pytest.ini` — the `web/` + `api/`, `apps/*`, `packages/*` layouts — and
-scopes each gate to that folder's files, running the command from inside it. Nested gates
-are only added for the kind the root did not already provide, so a repo that works today
-keeps working.
-
-Setting `GAUNTLET_TEST` or `GAUNTLET_TYPECHECK` switches the repo to explicit mode:
-auto-detection is off and only what you set runs.
-
-**A missing tool is a skip, not a red.** A fresh clone with no `node_modules`, or a venv
-without pytest, would otherwise fail every gate and block every turn — so the hook reports
-`skipped: node_modules is missing — run your install first` and gets out of the way. Only
-a gate that actually ran and actually failed blocks. Override anything in
-a config file — two are read, in this order, and the project's wins key by key:
-
-```text
-~/.claude/gauntlet.conf          your defaults for every project
-<project>/.claude/gauntlet.conf  overrides for this one
-```
-
-```bash
-GAUNTLET_OFF=1                       # disable entirely
-GAUNTLET_TYPECHECK='npm run check'   # "" to skip the gate
-GAUNTLET_TEST='npm test -- $FILES'   # $FILES = changed code files
-GAUNTLET_CODE_EXT='ts|tsx|py'        # what counts as a change worth checking
-GAUNTLET_DEBUG=1                     # print the outcome to stderr every run
-GAUNTLET_REQUIRE_TESTS=1             # block when the runner matched 0 test files
-
-# /ship's gate reads its own keys from the same file
-GAUNTLET_MAX_LINES=200               # per-file limit; 0 turns the check off
-GAUNTLET_SOURCE_EXT='ts|tsx|py'      # what counts as SOURCE — not the same question
-GAUNTLET_MUTATE='bash mutate.sh'     # replace per-project mutation detection
-GAUNTLET_IGNORE_FILES='*.gen.ts'     # globs that are never gated — see below
-```
-
-`GAUNTLET_IGNORE_FILES` holds files nobody wrote, so the line limit and mutation both
-skip them. It defaults to `*.gen.ts *.gen.tsx *.generated.* */migrations/*.py
-*/alembic/versions/*.py */components/ui/*.tsx` — a TanStack `routeTree.gen.ts`, a Django
-or Alembic migration, and a vendored shadcn component are all over 200 lines, none of
-them can be split, and gating them only teaches `--force`. Every skipped file is named in
-the output. Patterns match against `/<path>`, so `*/components/ui/*.tsx` covers the repo
-root and `apps/web/src` alike. Set it to `""` to gate everything.
-
-`GAUNTLET_SOURCE_EXT` is separate from `GAUNTLET_CODE_EXT` on purpose. The Stop hook asks
-"did anything worth checking change", so a docs repo sets `CODE_EXT` to include `.md`. The
-line limit and mutation ask about source code, where that answer is wrong.
-
-Set your house rules once in `~/.claude/gauntlet.conf`; only reach for the project file
-where a repo does something unusual (or set `GAUNTLET_OFF=1` there to opt one out).
-
-It registers in `.claude/settings.json`:
-
-```json
-{
-  "hooks": {
-    "Stop": [
-      { "hooks": [
-        { "type": "command", "command": "$CLAUDE_PROJECT_DIR/.claude/hooks/gauntlet.sh" } ] }
-    ]
-  }
-}
-```
-
-</details>
-
-<details>
-<summary>Manual install (without the CLI)</summary>
-
-```bash
-# Skills
-cp -r skills/<skill-name> /path/to/project/.claude/skills/
-
-# Commands
-cp commands/<command-name>.md /path/to/project/.claude/commands/
-
-# Subagents — see the command's `requires-agents` frontmatter
-cp agents/<agent-name>.md /path/to/project/.claude/agents/
+node ~/projects/claude-skills/cli/bin/cli.mjs --local
 ```
 
-</details>
-
 ## Repository Layout
 
 ```text
@@ -359,7 +186,7 @@ agents/        Subagent definitions — commands declare which they need via req
 scripts/       validate-skills.mjs — checks skill length caps and reference integrity
                gauntlet.sh — the Stop-hook verification gates, embedded by the CLI
                ship-gate.sh — /ship's file-length and mutation checks, behind an exit code
-               ship-gate-hook.sh — refuses git commit/push without a ship-gate receipt
+               ship-gate-hook.sh — refuses gh pr create/merge without a ship-gate receipt
                version-check.sh — SessionStart nudge when a newer catalog is published
                gauntlet-selftest.sh — behavioural tests for the hooks (runs on pre-push)
                gauntlet-survey.sh — what the hook would do in every repo under a directory
@@ -370,6 +197,12 @@ cli/           The npm installer (npx @spardutti/claude-skills); version in cli/
 package.json   Private dev-tooling package (claude-skills-dev) — not the published one
 ```
 
+## Getting Help
+
+- **Something broken, or a skill teaching something stale?** [Open an issue](https://github.com/Spardutti/claude-skills/issues).
+- **A hook not firing, or a gate blocking something it shouldn't?** [HOOKS.md](./HOOKS.md) covers the markers, the matchers, and the escape hatches — including the auto-mode permission rule the gates need.
+- **Want a skill for a tool that isn't here?** Issues are the place; see [Contributing](#contributing) for what a good one looks like.
+
 ## Contributing
 
 Skills live in `skills/<name>/SKILL.md`. Authoring conventions are in [CLAUDE.md](./CLAUDE.md) — the short version:
@@ -388,9 +221,8 @@ Skills live in `skills/<name>/SKILL.md`. Authoring conventions are in [CLAUDE.md
   anything. Read the rows that say `nothing`.
 
 To get the validator on **every turn** instead of only on push, drop this into
-this repo's `.claude/gauntlet.conf` — `.claude/` is gitignored, so each contributor adds it
-locally. It has to be the project file, not `~/.claude/gauntlet.conf`: these settings are
-only right for a skills repo:
+this repo's `.claude/gauntlet.conf`. It has to be the project file, not
+`~/.claude/gauntlet.conf`: these settings are only right for a skills repo:
 
 ```bash
 GAUNTLET_CODE_EXT='md|mjs|js|json|sh'   # markdown IS the product here

package/bin/cli.mjs

@@ -273,6 +273,7 @@ async function main() {
         });
         if (doScaffold) {
           const installs = [];
+          const apiInstalls = [];
           const vitest = [];
           for (const n of stryker) {
             const r = await scaffoldStryker(CWD, n.rel);
@@ -284,7 +285,9 @@ async function main() {
             }
             // A project that already runs Stryker needs neither the install nor
             // the vitest exclude repeated at it; it only lacked the ignorer.
-            if (!n.ignorerOnly) {
+            if (n.ignorerOnly) {
+              apiInstalls.push(r.apiInstall);
+            } else {
               installs.push(r.install);
               vitest.push(r.vitest);
             }
@@ -300,9 +303,10 @@ async function main() {
           // The ignorer imports @stryker-mutator/api, which npm hoists by
           // accident and pnpm does not. Missing, it prints one WARN PluginLoader
           // line, loads nothing, and every className mutant comes back survived.
-          if (stryker.some((n) => n.ignorerOnly)) {
+          if (apiInstalls.length > 0) {
             console.log(`\n  ${chalk.yellow("!")} ${chalk.bold("The ignorer needs its own dependency:")}`);
-            console.log(`      ${chalk.cyan("add @stryker-mutator/api as a dev dependency")} ${chalk.dim("— pnpm does not hoist it, and without it the ignorer silently does not load")}`);
+            for (const c of apiInstalls) console.log(`      ${chalk.cyan(c)}`);
+            console.log(`      ${chalk.dim("without it the ignorer silently does not load")}`);
           }
         }
       }

package/lib/scaffold-stryker.mjs

@@ -78,9 +78,11 @@ async function exists(p) {
 // npm's flat node_modules hoists it so the import resolves by accident, and
 // pnpm's isolated store does not. The failure is one WARN PluginLoader line and
 // an ignorer that never loads, so every class-name mutant comes back survived.
-async function installCommand(dir, rel) {
-  const pnpm = await exists(join(dir, "pnpm-lock.yaml"));
-  const pkgs = "@stryker-mutator/core @stryker-mutator/vitest-runner @stryker-mutator/api";
+// A workspace keeps its lockfile at the root, not in apps/web, so asking only
+// the sub-project hands a pnpm monorepo an npm command.
+async function installCommand(projectDir, dir, rel, pkgs) {
+  const pnpm =
+    (await exists(join(projectDir, "pnpm-lock.yaml"))) || (await exists(join(dir, "pnpm-lock.yaml")));
   return pnpm
     ? `pnpm --dir ${rel || "."} add -D ${pkgs}`
     : `npm --prefix ${rel || "."} i -D ${pkgs}`;
@@ -185,7 +187,17 @@ export async function scaffoldStryker(projectDir, rel) {
     kept,
     patched,
     unreadable,
-    install: await installCommand(dir, rel),
+    install: await installCommand(
+      projectDir,
+      dir,
+      rel,
+      "@stryker-mutator/core @stryker-mutator/vitest-runner @stryker-mutator/api",
+    ),
+    // A project that already runs Stryker has the other two packages and needs
+    // only this one, which nothing depends on directly. Printed as a command
+    // rather than a sentence: the sentence made every reader guess their own
+    // package manager and path.
+    apiInstall: await installCommand(projectDir, dir, rel, "@stryker-mutator/api"),
     // Stryker copies the whole project into .stryker-tmp/sandbox-*/, so every
     // test file briefly exists twice and the runner collects both. They pass,
     // so a doubled test count is the only symptom. Spread configDefaults.exclude

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@spardutti/claude-skills",
-  "version": "2.25.0",
-  "description": "CLI to install Claude Code skills from the claude-skills collection",
+  "version": "2.25.2",
+  "description": "Guardrails for Claude Code — best-practice skills, planning commands, and delivery gates.",
   "type": "module",
   "repository": {
     "type": "git",