@sonatype/nexus-iq-api-client 0.192.1 → 0.193.2

package/.openapi-generator/FILES

@@ -10,6 +10,7 @@ src/apis/ApplicationsApi.ts
 src/apis/AuditLogsApi.ts
 src/apis/AutoPolicyWaiverExclusionsApi.ts
 src/apis/AutoPolicyWaiversApi.ts
+src/apis/CPEMatchingConfigurationApi.ts
 src/apis/ClaimComponentsApi.ts
 src/apis/ComponentLabelsApi.ts
 src/apis/ComponentSearchApi.ts
@@ -42,6 +43,7 @@ src/apis/PolicyViolationDetailsApi.ts
 src/apis/PolicyWaiverReasonsApi.ts
 src/apis/PolicyWaiverRequestsApi.ts
 src/apis/PolicyWaiversApi.ts
+src/apis/ProductLicenseApi.ts
 src/apis/ReportsApi.ts
 src/apis/RepositoriesApi.ts
 src/apis/RoleMembershipsApi.ts
@@ -52,7 +54,6 @@ src/apis/SecurityVulnerabilityOverridesApi.ts
 src/apis/SolutionsApi.ts
 src/apis/SourceControlApi.ts
 src/apis/SourceControlMetricsApi.ts
-src/apis/TelemetryApi.ts
 src/apis/ThirdPartyAnalysisApi.ts
 src/apis/UserTokensApi.ts
 src/apis/UsersApi.ts
@@ -260,6 +261,8 @@ src/models/ComponentObligationAttributionDTO.ts
 src/models/ConditionFact.ts
 src/models/ConfigurationValidationResult.ts
 src/models/ConstraintFact.ts
+src/models/CpeMatchingConfigurationDTO.ts
+src/models/CpeMatchingConfigurationRequest.ts
 src/models/CweIdDTO.ts
 src/models/DevelopmentPrioritizationResults.ts
 src/models/FormDataContentDisposition.ts
@@ -267,6 +270,8 @@ src/models/GetSuggestedRemediationForComponent200Response.ts
 src/models/GroupingByDTO.ts
 src/models/ImportSbomRequest.ts
 src/models/InnerSourceData.ts
+src/models/InstallLicenseRequest.ts
+src/models/KevData.ts
 src/models/LabelsByOwner.ts
 src/models/LegalSourceLinkDTO.ts
 src/models/LicenseObligationDTO.ts

package/README.md

@@ -1,4 +1,4 @@
-## @sonatype/nexus-iq-api-client@1.192.0-01
+## @sonatype/nexus-iq-api-client@1.193.0-01
 
 This generator creates TypeScript/JavaScript client that utilizes [Fetch API](https://fetch.spec.whatwg.org/). The generated Node module can be used in the following environments:
 
@@ -36,7 +36,7 @@ navigate to the folder of your consuming project and run one of the following co
 _published:_
 
 ```
-npm install @sonatype/nexus-iq-api-client@1.192.0-01 --save
+npm install @sonatype/nexus-iq-api-client@1.193.0-01 --save
 ```
 
 _unPublished (not recommended):_

package/dist/apis/AdvancedSearchApi.d.ts

@@ -2,7 +2,7 @@
  * Sonatype Lifecycle Public REST API
  * No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
  *
- * The version of the OpenAPI document: 1.192.0-01
+ * The version of the OpenAPI document: 1.193.0-01
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -11,14 +11,14 @@
  */
 import * as runtime from '../runtime';
 import type { SearchResultDTO } from '../models/index';
-export interface GetExportResultsRequest {
+export interface AdvancedSearchApiGetExportResultsRequest {
     query: string;
     pageSize?: number;
     page?: number;
     allComponents?: boolean;
     mode?: GetExportResultsModeEnum;
 }
-export interface SearchIndexRequest {
+export interface AdvancedSearchApiSearchIndexRequest {
     query?: string;
     pageSize?: number;
     page?: number;
@@ -54,11 +54,11 @@ export interface AdvancedSearchApiInterface {
      * @throws {RequiredError}
      * @memberof AdvancedSearchApiInterface
      */
-    getExportResultsRaw(requestParameters: GetExportResultsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<void>>;
+    getExportResultsRaw(requestParameters: AdvancedSearchApiGetExportResultsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<void>>;
     /**
      * Use this method to generate a csv file containing your search results. The default delimiter in the generated file is comma. Use the advancedSearchCSVExportDelimiter property of the Configuration REST API to change the delimiter in the generated file.
      */
-    getExportResults(requestParameters: GetExportResultsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<void>;
+    getExportResults(requestParameters: AdvancedSearchApiGetExportResultsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<void>;
     /**
      * Use this method to perform an Advanced Search.
      * @param {string} [query] Enter your search query here
@@ -70,11 +70,11 @@ export interface AdvancedSearchApiInterface {
      * @throws {RequiredError}
      * @memberof AdvancedSearchApiInterface
      */
-    searchIndexRaw(requestParameters: SearchIndexRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<SearchResultDTO>>;
+    searchIndexRaw(requestParameters: AdvancedSearchApiSearchIndexRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<SearchResultDTO>>;
     /**
      * Use this method to perform an Advanced Search.
      */
-    searchIndex(requestParameters: SearchIndexRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<SearchResultDTO>;
+    searchIndex(requestParameters: AdvancedSearchApiSearchIndexRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<SearchResultDTO>;
 }
 /**
  *
@@ -91,19 +91,19 @@ export declare class AdvancedSearchApi extends runtime.BaseAPI implements Advanc
     /**
      * Use this method to generate a csv file containing your search results. The default delimiter in the generated file is comma. Use the advancedSearchCSVExportDelimiter property of the Configuration REST API to change the delimiter in the generated file.
      */
-    getExportResultsRaw(requestParameters: GetExportResultsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<void>>;
+    getExportResultsRaw(requestParameters: AdvancedSearchApiGetExportResultsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<void>>;
     /**
      * Use this method to generate a csv file containing your search results. The default delimiter in the generated file is comma. Use the advancedSearchCSVExportDelimiter property of the Configuration REST API to change the delimiter in the generated file.
      */
-    getExportResults(requestParameters: GetExportResultsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<void>;
+    getExportResults(requestParameters: AdvancedSearchApiGetExportResultsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<void>;
     /**
      * Use this method to perform an Advanced Search.
      */
-    searchIndexRaw(requestParameters: SearchIndexRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<SearchResultDTO>>;
+    searchIndexRaw(requestParameters: AdvancedSearchApiSearchIndexRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<SearchResultDTO>>;
     /**
      * Use this method to perform an Advanced Search.
      */
-    searchIndex(requestParameters?: SearchIndexRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<SearchResultDTO>;
+    searchIndex(requestParameters?: AdvancedSearchApiSearchIndexRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<SearchResultDTO>;
 }
 /**
  * @export

package/dist/apis/AdvancedSearchApi.js

@@ -5,7 +5,7 @@
  * Sonatype Lifecycle Public REST API
  * No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
  *
- * The version of the OpenAPI document: 1.192.0-01
+ * The version of the OpenAPI document: 1.193.0-01
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/apis/ApplicationCategoriesApi.d.ts

@@ -2,7 +2,7 @@
  * Sonatype Lifecycle Public REST API
  * No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
  *
- * The version of the OpenAPI document: 1.192.0-01
+ * The version of the OpenAPI document: 1.193.0-01
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -11,33 +11,33 @@
  */
 import * as runtime from '../runtime';
 import type { ApiApplicationCategoryDTO, ApplicableTagsDTO, AppliedTagsDTO, PolicyTag } from '../models/index';
-export interface AddTagRequest {
+export interface ApplicationCategoriesApiAddTagRequest {
     organizationId: string;
     apiApplicationCategoryDTO: ApiApplicationCategoryDTO;
 }
-export interface DeleteTagRequest {
+export interface ApplicationCategoriesApiDeleteTagRequest {
     organizationId: string;
     tagId: string;
 }
-export interface GetApplicableTagsRequest {
+export interface ApplicationCategoriesApiGetApplicableTagsRequest {
     organizationId: string;
 }
-export interface GetApplicableTagsByApplicationPublicIdRequest {
+export interface ApplicationCategoriesApiGetApplicableTagsByApplicationPublicIdRequest {
     applicationPublicId: string;
 }
-export interface GetApplicationApplicableTagsRequest {
+export interface ApplicationCategoriesApiGetApplicationApplicableTagsRequest {
     applicationPublicId: string;
 }
-export interface GetAppliedPolicyTagsRequest {
+export interface ApplicationCategoriesApiGetAppliedPolicyTagsRequest {
     organizationId: string;
 }
-export interface GetAppliedTagsRequest {
+export interface ApplicationCategoriesApiGetAppliedTagsRequest {
     organizationId: string;
 }
-export interface GetTagsRequest {
+export interface ApplicationCategoriesApiGetTagsRequest {
     organizationId: string;
 }
-export interface UpdateTagRequest {
+export interface ApplicationCategoriesApiUpdateTagRequest {
     organizationId: string;
     apiApplicationCategoryDTO: ApiApplicationCategoryDTO;
 }
@@ -56,11 +56,11 @@ export interface ApplicationCategoriesApiInterface {
      * @throws {RequiredError}
      * @memberof ApplicationCategoriesApiInterface
      */
-    addTagRaw(requestParameters: AddTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiApplicationCategoryDTO>>;
+    addTagRaw(requestParameters: ApplicationCategoriesApiAddTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiApplicationCategoryDTO>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to add a new application category or tag.
      */
-    addTag(requestParameters: AddTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiApplicationCategoryDTO>;
+    addTag(requestParameters: ApplicationCategoriesApiAddTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiApplicationCategoryDTO>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to update an existing application category.Use this method to delete an existing application category.
      * @param {string} organizationId The organizationId assigned by IQ Server, corresponding to the application category tag you want to delete.
@@ -69,11 +69,11 @@ export interface ApplicationCategoriesApiInterface {
      * @throws {RequiredError}
      * @memberof ApplicationCategoriesApiInterface
      */
-    deleteTagRaw(requestParameters: DeleteTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<void>>;
+    deleteTagRaw(requestParameters: ApplicationCategoriesApiDeleteTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<void>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to update an existing application category.Use this method to delete an existing application category.
      */
-    deleteTag(requestParameters: DeleteTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<void>;
+    deleteTag(requestParameters: ApplicationCategoriesApiDeleteTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<void>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories that can be applied to applications in this organization.
      * @param {string} organizationId The organizationId assigned by IQ Server, for which you want to retrieve the applicable tags or application categories.
@@ -81,11 +81,11 @@ export interface ApplicationCategoriesApiInterface {
      * @throws {RequiredError}
      * @memberof ApplicationCategoriesApiInterface
      */
-    getApplicableTagsRaw(requestParameters: GetApplicableTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApplicableTagsDTO>>;
+    getApplicableTagsRaw(requestParameters: ApplicationCategoriesApiGetApplicableTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApplicableTagsDTO>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories that can be applied to applications in this organization.
      */
-    getApplicableTags(requestParameters: GetApplicableTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApplicableTagsDTO>;
+    getApplicableTags(requestParameters: ApplicationCategoriesApiGetApplicableTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApplicableTagsDTO>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories that can be applied to applications in this organization.
      * @param {string} applicationPublicId Provide the application public ID assigned by IQ Server.
@@ -93,11 +93,11 @@ export interface ApplicationCategoriesApiInterface {
      * @throws {RequiredError}
      * @memberof ApplicationCategoriesApiInterface
      */
-    getApplicableTagsByApplicationPublicIdRaw(requestParameters: GetApplicableTagsByApplicationPublicIdRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<Array<ApiApplicationCategoryDTO>>>;
+    getApplicableTagsByApplicationPublicIdRaw(requestParameters: ApplicationCategoriesApiGetApplicableTagsByApplicationPublicIdRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<Array<ApiApplicationCategoryDTO>>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories that can be applied to applications in this organization.
      */
-    getApplicableTagsByApplicationPublicId(requestParameters: GetApplicableTagsByApplicationPublicIdRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<Array<ApiApplicationCategoryDTO>>;
+    getApplicableTagsByApplicationPublicId(requestParameters: ApplicationCategoriesApiGetApplicableTagsByApplicationPublicIdRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<Array<ApiApplicationCategoryDTO>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories available to applications in this organization.
      * @param {string} applicationPublicId The application public ID
@@ -105,11 +105,11 @@ export interface ApplicationCategoriesApiInterface {
      * @throws {RequiredError}
      * @memberof ApplicationCategoriesApiInterface
      */
-    getApplicationApplicableTagsRaw(requestParameters: GetApplicationApplicableTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApplicableTagsDTO>>;
+    getApplicationApplicableTagsRaw(requestParameters: ApplicationCategoriesApiGetApplicationApplicableTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApplicableTagsDTO>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories available to applications in this organization.
      */
-    getApplicationApplicableTags(requestParameters: GetApplicationApplicableTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApplicableTagsDTO>;
+    getApplicationApplicableTags(requestParameters: ApplicationCategoriesApiGetApplicationApplicableTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApplicableTagsDTO>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories that are applied to applications in this organization.
      * @param {string} organizationId The organizationId assigned by IQ Server.
@@ -117,11 +117,11 @@ export interface ApplicationCategoriesApiInterface {
      * @throws {RequiredError}
      * @memberof ApplicationCategoriesApiInterface
      */
-    getAppliedPolicyTagsRaw(requestParameters: GetAppliedPolicyTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<Array<PolicyTag>>>;
+    getAppliedPolicyTagsRaw(requestParameters: ApplicationCategoriesApiGetAppliedPolicyTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<Array<PolicyTag>>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories that are applied to applications in this organization.
      */
-    getAppliedPolicyTags(requestParameters: GetAppliedPolicyTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<Array<PolicyTag>>;
+    getAppliedPolicyTags(requestParameters: ApplicationCategoriesApiGetAppliedPolicyTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<Array<PolicyTag>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories that can be applied to applications in this organization.
      * @param {string} organizationId The organizationId assigned by IQ Server.
@@ -129,11 +129,11 @@ export interface ApplicationCategoriesApiInterface {
      * @throws {RequiredError}
      * @memberof ApplicationCategoriesApiInterface
      */
-    getAppliedTagsRaw(requestParameters: GetAppliedTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<AppliedTagsDTO>>;
+    getAppliedTagsRaw(requestParameters: ApplicationCategoriesApiGetAppliedTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<AppliedTagsDTO>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories that can be applied to applications in this organization.
      */
-    getAppliedTags(requestParameters: GetAppliedTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<AppliedTagsDTO>;
+    getAppliedTags(requestParameters: ApplicationCategoriesApiGetAppliedTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<AppliedTagsDTO>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories in use by applications in this organization.
      * @param {string} organizationId The organizationId assigned by IQ Server.
@@ -141,11 +141,11 @@ export interface ApplicationCategoriesApiInterface {
      * @throws {RequiredError}
      * @memberof ApplicationCategoriesApiInterface
      */
-    getTagsRaw(requestParameters: GetTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<Array<ApiApplicationCategoryDTO>>>;
+    getTagsRaw(requestParameters: ApplicationCategoriesApiGetTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<Array<ApiApplicationCategoryDTO>>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories in use by applications in this organization.
      */
-    getTags(requestParameters: GetTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<Array<ApiApplicationCategoryDTO>>;
+    getTags(requestParameters: ApplicationCategoriesApiGetTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<Array<ApiApplicationCategoryDTO>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories.
      * @param {*} [options] Override http request option.
@@ -165,11 +165,11 @@ export interface ApplicationCategoriesApiInterface {
      * @throws {RequiredError}
      * @memberof ApplicationCategoriesApiInterface
      */
-    updateTagRaw(requestParameters: UpdateTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiApplicationCategoryDTO>>;
+    updateTagRaw(requestParameters: ApplicationCategoriesApiUpdateTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiApplicationCategoryDTO>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to update an existing application category.
      */
-    updateTag(requestParameters: UpdateTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiApplicationCategoryDTO>;
+    updateTag(requestParameters: ApplicationCategoriesApiUpdateTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiApplicationCategoryDTO>;
 }
 /**
  *
@@ -178,67 +178,67 @@ export declare class ApplicationCategoriesApi extends runtime.BaseAPI implements
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to add a new application category or tag.
      */
-    addTagRaw(requestParameters: AddTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiApplicationCategoryDTO>>;
+    addTagRaw(requestParameters: ApplicationCategoriesApiAddTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiApplicationCategoryDTO>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to add a new application category or tag.
      */
-    addTag(requestParameters: AddTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiApplicationCategoryDTO>;
+    addTag(requestParameters: ApplicationCategoriesApiAddTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiApplicationCategoryDTO>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to update an existing application category.Use this method to delete an existing application category.
      */
-    deleteTagRaw(requestParameters: DeleteTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<void>>;
+    deleteTagRaw(requestParameters: ApplicationCategoriesApiDeleteTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<void>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to update an existing application category.Use this method to delete an existing application category.
      */
-    deleteTag(requestParameters: DeleteTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<void>;
+    deleteTag(requestParameters: ApplicationCategoriesApiDeleteTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<void>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories that can be applied to applications in this organization.
      */
-    getApplicableTagsRaw(requestParameters: GetApplicableTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApplicableTagsDTO>>;
+    getApplicableTagsRaw(requestParameters: ApplicationCategoriesApiGetApplicableTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApplicableTagsDTO>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories that can be applied to applications in this organization.
      */
-    getApplicableTags(requestParameters: GetApplicableTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApplicableTagsDTO>;
+    getApplicableTags(requestParameters: ApplicationCategoriesApiGetApplicableTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApplicableTagsDTO>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories that can be applied to applications in this organization.
      */
-    getApplicableTagsByApplicationPublicIdRaw(requestParameters: GetApplicableTagsByApplicationPublicIdRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<Array<ApiApplicationCategoryDTO>>>;
+    getApplicableTagsByApplicationPublicIdRaw(requestParameters: ApplicationCategoriesApiGetApplicableTagsByApplicationPublicIdRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<Array<ApiApplicationCategoryDTO>>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories that can be applied to applications in this organization.
      */
-    getApplicableTagsByApplicationPublicId(requestParameters: GetApplicableTagsByApplicationPublicIdRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<Array<ApiApplicationCategoryDTO>>;
+    getApplicableTagsByApplicationPublicId(requestParameters: ApplicationCategoriesApiGetApplicableTagsByApplicationPublicIdRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<Array<ApiApplicationCategoryDTO>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories available to applications in this organization.
      */
-    getApplicationApplicableTagsRaw(requestParameters: GetApplicationApplicableTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApplicableTagsDTO>>;
+    getApplicationApplicableTagsRaw(requestParameters: ApplicationCategoriesApiGetApplicationApplicableTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApplicableTagsDTO>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories available to applications in this organization.
      */
-    getApplicationApplicableTags(requestParameters: GetApplicationApplicableTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApplicableTagsDTO>;
+    getApplicationApplicableTags(requestParameters: ApplicationCategoriesApiGetApplicationApplicableTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApplicableTagsDTO>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories that are applied to applications in this organization.
      */
-    getAppliedPolicyTagsRaw(requestParameters: GetAppliedPolicyTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<Array<PolicyTag>>>;
+    getAppliedPolicyTagsRaw(requestParameters: ApplicationCategoriesApiGetAppliedPolicyTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<Array<PolicyTag>>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories that are applied to applications in this organization.
      */
-    getAppliedPolicyTags(requestParameters: GetAppliedPolicyTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<Array<PolicyTag>>;
+    getAppliedPolicyTags(requestParameters: ApplicationCategoriesApiGetAppliedPolicyTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<Array<PolicyTag>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories that can be applied to applications in this organization.
      */
-    getAppliedTagsRaw(requestParameters: GetAppliedTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<AppliedTagsDTO>>;
+    getAppliedTagsRaw(requestParameters: ApplicationCategoriesApiGetAppliedTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<AppliedTagsDTO>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories that can be applied to applications in this organization.
      */
-    getAppliedTags(requestParameters: GetAppliedTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<AppliedTagsDTO>;
+    getAppliedTags(requestParameters: ApplicationCategoriesApiGetAppliedTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<AppliedTagsDTO>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories in use by applications in this organization.
      */
-    getTagsRaw(requestParameters: GetTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<Array<ApiApplicationCategoryDTO>>>;
+    getTagsRaw(requestParameters: ApplicationCategoriesApiGetTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<Array<ApiApplicationCategoryDTO>>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories in use by applications in this organization.
      */
-    getTags(requestParameters: GetTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<Array<ApiApplicationCategoryDTO>>;
+    getTags(requestParameters: ApplicationCategoriesApiGetTagsRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<Array<ApiApplicationCategoryDTO>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to retrieve a list of application categories.
      */
@@ -250,9 +250,9 @@ export declare class ApplicationCategoriesApi extends runtime.BaseAPI implements
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to update an existing application category.
      */
-    updateTagRaw(requestParameters: UpdateTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiApplicationCategoryDTO>>;
+    updateTagRaw(requestParameters: ApplicationCategoriesApiUpdateTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiApplicationCategoryDTO>>;
     /**
      * Grouping applications with similar characteristics into categories makes policy management easier. You can then create a policy that applies to a specific category. Use this method to update an existing application category.
      */
-    updateTag(requestParameters: UpdateTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiApplicationCategoryDTO>;
+    updateTag(requestParameters: ApplicationCategoriesApiUpdateTagRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiApplicationCategoryDTO>;
 }

package/dist/apis/ApplicationCategoriesApi.js

@@ -5,7 +5,7 @@
  * Sonatype Lifecycle Public REST API
  * No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
  *
- * The version of the OpenAPI document: 1.192.0-01
+ * The version of the OpenAPI document: 1.193.0-01
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/apis/ApplicationReportDataApi.d.ts

@@ -2,7 +2,7 @@
  * Sonatype Lifecycle Public REST API
  * No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
  *
- * The version of the OpenAPI document: 1.192.0-01
+ * The version of the OpenAPI document: 1.193.0-01
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -11,15 +11,15 @@
  */
 import * as runtime from '../runtime';
 import type { ApiDependencyTreeResponseDTO, ApiPolicyViolationDiffDTO, ApiReportPolicyDataDTOV2, ApiReportRawDataDTOV2 } from '../models/index';
-export interface GetDataRequest {
+export interface ApplicationReportDataApiGetDataRequest {
     applicationPublicId: string;
     scanId: string;
 }
-export interface GetDependencyTreeRequest {
+export interface ApplicationReportDataApiGetDependencyTreeRequest {
     applicationPublicId: string;
     scanId: string;
 }
-export interface GetPolicyViolationDiffRequest {
+export interface ApplicationReportDataApiGetPolicyViolationDiffRequest {
     applicationPublicId: string;
     fromCommit: string;
     toCommit: string;
@@ -27,12 +27,12 @@ export interface GetPolicyViolationDiffRequest {
     toPolicyEvaluationId?: string;
     includeViolationTimes?: boolean;
 }
-export interface GetPolicyViolations1Request {
+export interface ApplicationReportDataApiGetPolicyViolations1Request {
     applicationPublicId: string;
     scanId: string;
     includeViolationTimes?: boolean;
 }
-export interface GetRawDataRequest {
+export interface ApplicationReportDataApiGetRawDataRequest {
     applicationPublicId: string;
     scanId: string;
 }
@@ -51,11 +51,11 @@ export interface ApplicationReportDataApiInterface {
      * @throws {RequiredError}
      * @memberof ApplicationReportDataApiInterface
      */
-    getDataRaw(requestParameters: GetDataRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<void>>;
+    getDataRaw(requestParameters: ApplicationReportDataApiGetDataRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<void>>;
     /**
      * This is an older version of the endpoint. This call will now be redirected to /api/v2/applications/{applicationPublicId}/reports/{scanId}/raw (see below)
      */
-    getData(requestParameters: GetDataRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<void>;
+    getData(requestParameters: ApplicationReportDataApiGetDataRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<void>;
     /**
      * Use this method to retrieve the dependencies related to the component identified at the time of application evaluation. This is currently available only for Java (Maven) and NPM applications.  Permissions required: View IQ Elements
      * @param {string} applicationPublicId Enter the applicationPublicId created at the time of creating the application.
@@ -64,11 +64,11 @@ export interface ApplicationReportDataApiInterface {
      * @throws {RequiredError}
      * @memberof ApplicationReportDataApiInterface
      */
-    getDependencyTreeRaw(requestParameters: GetDependencyTreeRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiDependencyTreeResponseDTO>>;
+    getDependencyTreeRaw(requestParameters: ApplicationReportDataApiGetDependencyTreeRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiDependencyTreeResponseDTO>>;
     /**
      * Use this method to retrieve the dependencies related to the component identified at the time of application evaluation. This is currently available only for Java (Maven) and NPM applications.  Permissions required: View IQ Elements
      */
-    getDependencyTree(requestParameters: GetDependencyTreeRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiDependencyTreeResponseDTO>;
+    getDependencyTree(requestParameters: ApplicationReportDataApiGetDependencyTreeRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiDependencyTreeResponseDTO>;
     /**
      * By configuring Lifecycle with SCM, policy evaluations can be linked to the Git commit hash. Use this method to compare the violations between policy evaluations for 2 commits, by providing the linked commit hashes.  Permissions required: View IQ Elements
      * @param {string} applicationPublicId Enter the applicationPublicId, created at the time of creating the application
@@ -81,11 +81,11 @@ export interface ApplicationReportDataApiInterface {
      * @throws {RequiredError}
      * @memberof ApplicationReportDataApiInterface
      */
-    getPolicyViolationDiffRaw(requestParameters: GetPolicyViolationDiffRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiPolicyViolationDiffDTO>>;
+    getPolicyViolationDiffRaw(requestParameters: ApplicationReportDataApiGetPolicyViolationDiffRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiPolicyViolationDiffDTO>>;
     /**
      * By configuring Lifecycle with SCM, policy evaluations can be linked to the Git commit hash. Use this method to compare the violations between policy evaluations for 2 commits, by providing the linked commit hashes.  Permissions required: View IQ Elements
      */
-    getPolicyViolationDiff(requestParameters: GetPolicyViolationDiffRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiPolicyViolationDiffDTO>;
+    getPolicyViolationDiff(requestParameters: ApplicationReportDataApiGetPolicyViolationDiffRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiPolicyViolationDiffDTO>;
     /**
      * Use this method to retrieve the policy violation data generated as a result of an application evaluation, for each component identified in the application evaluation./n/nPermissions required: View IQ Elements
      * @param {string} applicationPublicId Enter the applicationPublicId created at the time of creating the application.
@@ -95,11 +95,11 @@ export interface ApplicationReportDataApiInterface {
      * @throws {RequiredError}
      * @memberof ApplicationReportDataApiInterface
      */
-    getPolicyViolations1Raw(requestParameters: GetPolicyViolations1Request, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiReportPolicyDataDTOV2>>;
+    getPolicyViolations1Raw(requestParameters: ApplicationReportDataApiGetPolicyViolations1Request, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiReportPolicyDataDTOV2>>;
     /**
      * Use this method to retrieve the policy violation data generated as a result of an application evaluation, for each component identified in the application evaluation./n/nPermissions required: View IQ Elements
      */
-    getPolicyViolations1(requestParameters: GetPolicyViolations1Request, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiReportPolicyDataDTOV2>;
+    getPolicyViolations1(requestParameters: ApplicationReportDataApiGetPolicyViolations1Request, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiReportPolicyDataDTOV2>;
     /**
      * Use this method to retrieve the \'raw\' data generated as a result of an application evaluation. \'raw\' data includes: the components identified in the application, and the licenses and vulnerabilities associated with the identified components./n/nPermissions required: View IQ Elements
      * @param {string} applicationPublicId Enter the applicationPublicId (assigned at the time of creating a new application.)
@@ -108,11 +108,11 @@ export interface ApplicationReportDataApiInterface {
      * @throws {RequiredError}
      * @memberof ApplicationReportDataApiInterface
      */
-    getRawDataRaw(requestParameters: GetRawDataRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiReportRawDataDTOV2>>;
+    getRawDataRaw(requestParameters: ApplicationReportDataApiGetRawDataRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiReportRawDataDTOV2>>;
     /**
      * Use this method to retrieve the \'raw\' data generated as a result of an application evaluation. \'raw\' data includes: the components identified in the application, and the licenses and vulnerabilities associated with the identified components./n/nPermissions required: View IQ Elements
      */
-    getRawData(requestParameters: GetRawDataRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiReportRawDataDTOV2>;
+    getRawData(requestParameters: ApplicationReportDataApiGetRawDataRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiReportRawDataDTOV2>;
 }
 /**
  *
@@ -121,41 +121,41 @@ export declare class ApplicationReportDataApi extends runtime.BaseAPI implements
     /**
      * This is an older version of the endpoint. This call will now be redirected to /api/v2/applications/{applicationPublicId}/reports/{scanId}/raw (see below)
      */
-    getDataRaw(requestParameters: GetDataRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<void>>;
+    getDataRaw(requestParameters: ApplicationReportDataApiGetDataRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<void>>;
     /**
      * This is an older version of the endpoint. This call will now be redirected to /api/v2/applications/{applicationPublicId}/reports/{scanId}/raw (see below)
      */
-    getData(requestParameters: GetDataRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<void>;
+    getData(requestParameters: ApplicationReportDataApiGetDataRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<void>;
     /**
      * Use this method to retrieve the dependencies related to the component identified at the time of application evaluation. This is currently available only for Java (Maven) and NPM applications.  Permissions required: View IQ Elements
      */
-    getDependencyTreeRaw(requestParameters: GetDependencyTreeRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiDependencyTreeResponseDTO>>;
+    getDependencyTreeRaw(requestParameters: ApplicationReportDataApiGetDependencyTreeRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiDependencyTreeResponseDTO>>;
     /**
      * Use this method to retrieve the dependencies related to the component identified at the time of application evaluation. This is currently available only for Java (Maven) and NPM applications.  Permissions required: View IQ Elements
      */
-    getDependencyTree(requestParameters: GetDependencyTreeRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiDependencyTreeResponseDTO>;
+    getDependencyTree(requestParameters: ApplicationReportDataApiGetDependencyTreeRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiDependencyTreeResponseDTO>;
     /**
      * By configuring Lifecycle with SCM, policy evaluations can be linked to the Git commit hash. Use this method to compare the violations between policy evaluations for 2 commits, by providing the linked commit hashes.  Permissions required: View IQ Elements
      */
-    getPolicyViolationDiffRaw(requestParameters: GetPolicyViolationDiffRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiPolicyViolationDiffDTO>>;
+    getPolicyViolationDiffRaw(requestParameters: ApplicationReportDataApiGetPolicyViolationDiffRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiPolicyViolationDiffDTO>>;
     /**
      * By configuring Lifecycle with SCM, policy evaluations can be linked to the Git commit hash. Use this method to compare the violations between policy evaluations for 2 commits, by providing the linked commit hashes.  Permissions required: View IQ Elements
      */
-    getPolicyViolationDiff(requestParameters: GetPolicyViolationDiffRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiPolicyViolationDiffDTO>;
+    getPolicyViolationDiff(requestParameters: ApplicationReportDataApiGetPolicyViolationDiffRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiPolicyViolationDiffDTO>;
     /**
      * Use this method to retrieve the policy violation data generated as a result of an application evaluation, for each component identified in the application evaluation./n/nPermissions required: View IQ Elements
      */
-    getPolicyViolations1Raw(requestParameters: GetPolicyViolations1Request, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiReportPolicyDataDTOV2>>;
+    getPolicyViolations1Raw(requestParameters: ApplicationReportDataApiGetPolicyViolations1Request, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiReportPolicyDataDTOV2>>;
     /**
      * Use this method to retrieve the policy violation data generated as a result of an application evaluation, for each component identified in the application evaluation./n/nPermissions required: View IQ Elements
      */
-    getPolicyViolations1(requestParameters: GetPolicyViolations1Request, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiReportPolicyDataDTOV2>;
+    getPolicyViolations1(requestParameters: ApplicationReportDataApiGetPolicyViolations1Request, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiReportPolicyDataDTOV2>;
     /**
      * Use this method to retrieve the \'raw\' data generated as a result of an application evaluation. \'raw\' data includes: the components identified in the application, and the licenses and vulnerabilities associated with the identified components./n/nPermissions required: View IQ Elements
      */
-    getRawDataRaw(requestParameters: GetRawDataRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiReportRawDataDTOV2>>;
+    getRawDataRaw(requestParameters: ApplicationReportDataApiGetRawDataRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<runtime.ApiResponse<ApiReportRawDataDTOV2>>;
     /**
      * Use this method to retrieve the \'raw\' data generated as a result of an application evaluation. \'raw\' data includes: the components identified in the application, and the licenses and vulnerabilities associated with the identified components./n/nPermissions required: View IQ Elements
      */
-    getRawData(requestParameters: GetRawDataRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiReportRawDataDTOV2>;
+    getRawData(requestParameters: ApplicationReportDataApiGetRawDataRequest, initOverrides?: RequestInit | runtime.InitOverrideFunction): Promise<ApiReportRawDataDTOV2>;
 }

package/dist/apis/ApplicationReportDataApi.js

@@ -5,7 +5,7 @@
  * Sonatype Lifecycle Public REST API
  * No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
  *
- * The version of the OpenAPI document: 1.192.0-01
+ * The version of the OpenAPI document: 1.193.0-01
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).