@snaptrude/plugin-core 0.9.3 → 0.9.5

package/dist/api/core/geom/create/index.d.ts

@@ -232,28 +232,52 @@ export declare abstract class PluginGeomCreateApi {
     /**
      * Create a closed solid **B-rep** by lofting between a bottom and a top
      * contour, optionally through intermediate cross-sections. Host API call —
-     * returns a {@linkcode BrepHandle}. All sections must have the same number
-     * of edges; side faces connect corresponding edges by authored index.
-     * Corresponding edges must stay coplanar segment to segment (matching hole
-     * counts allowed in the two-section form) — a twisted loft would produce
-     * non-planar side faces and is rejected. With intermediates the loft is a
-     * chain of ruled segments folded into one solid: sections must be planar
-     * and hole-free, ordered bottom → intermediates → top. The contours are
-     * copied — the input handles are never mutated.
+     * returns a {@linkcode BrepHandle}. Sections with different edge counts are
+     * auto-matched: vertices are deterministically inserted on the smaller
+     * sections at the larger section's perimeter positions, so the same input
+     * always yields the same solid. For straight-edge (all-line) sections the
+     * seam is auto-aligned too — winding and start-vertex correspondence are
+     * chosen to avoid a twist, so outlines authored from any starting corner
+     * loft cleanly; arc-bearing sections keep the authored correspondence
+     * unchanged. A pair whose side faces would be non-planar under every
+     * correspondence still builds for hole-free straight-edged pairs — planar
+     * side quads stay quads and warped ones split into planar triangles (the
+     * triangulated lane); arc-bearing or holed twisted pairs are rejected, as is
+     * auto-matching that would pair an arc with a straight edge. Matching hole
+     * counts are allowed in the two-section form. With intermediates the loft
+     * is a chain of ruled segments folded into one solid: sections must be
+     * planar and hole-free, ordered bottom → intermediates → top. The contours
+     * are copied — the input handles are never mutated.
      *
      * Inspect the result via `core.geom.query.brep.*`, or commit it to the scene
      * with `design.create.massFromBrep`.
      *
      * @param bottomContour The bottom cross-section
-     * @param topContour The top cross-section (same edge count as the bottom)
+     * @param topContour The top cross-section (edge count may differ from the
+     *   bottom — sections are auto-matched)
      * @param intermediateContours Optional in-between cross-sections, ordered
-     *   bottom to top (hole-free, same edge count as the bottom and top)
+     *   bottom to top (hole-free; edge counts may differ — every section is
+     *   normalized to the largest)
+     * @param options Optional behavior switches. `compatibility` — `"auto"`
+     *   (default) inserts vertices to match differing edge counts; `"strict"`
+     *   skips normalization and throws VALIDATION when outer edge counts (or,
+     *   in the two-section form, hole-pair counts) differ. `seamAlignment` —
+     *   `"auto"` (default) searches seam rotations on straight-edge sections to
+     *   avoid a twist; `"authored"` keeps the authored start-vertex
+     *   correspondence unchanged (a twisted correspondence then builds through
+     *   the triangulated lane for hole-free straight-edged pairs).
+     *   `{ compatibility: "strict", seamAlignment: "authored" }` reproduces
+     *   pre-0.9.4 lofting exactly.
      * @returns The new solid as a {@linkcode BrepHandle}
-     * @throws VALIDATION if the contours are coincident, their edge or hole
-     *   counts differ, any section has holes when intermediates are present
+     * @throws VALIDATION if the contours are coincident, their hole counts
+     *   differ, any section has holes when intermediates are present
      *   (multi-section lofts take hole-free sections), a section is non-planar,
-     *   or a side face between corresponding edges would be non-planar (a
-     *   twisted section pair — the error names the offending sections)
+     *   sections are too dissimilar to auto-match, auto-matching would pair an
+     *   arc with a straight edge, or — for arc-bearing or holed pairs only — no vertex correspondence avoids a twist (a
+     *   side face between corresponding edges would be non-planar — the error
+     *   names the offending sections); with `compatibility: "strict"`, if
+     *   section edge counts (or hole-pair counts) differ — the error names the
+     *   sections and counts and points at `compatibility: "auto"`
      * @throws OPERATION_FAILED if the lofted segments cannot be joined into a
      *   valid solid
      *
@@ -261,6 +285,10 @@ export declare abstract class PluginGeomCreateApi {
      * @examplePrompt Loft between a large base and a smaller top
      * @examplePrompt Create a frustum from two squares
      * @examplePrompt Loft the tower through these three floor outlines
+     * @examplePrompt Loft a four-sided base to a five-sided top
+     * @examplePrompt Loft these outlines even though their corners don't line up
+     * @examplePrompt Loft these outlines exactly as authored, corner to corner
+     * @examplePrompt Fail the loft if my sections don't have matching edge counts
      *
      * # Example
      * ```ts
@@ -274,7 +302,10 @@ export declare abstract class PluginGeomCreateApi {
      * const faceCount = await snaptrude.core.geom.query.brep.getFaceCount(brep) // 6
      * ```
      */
-    abstract brepFromLoft(bottomContour: ContourHandle, topContour: ContourHandle, intermediateContours?: ContourHandle[]): PluginApiReturn<BrepHandle>;
+    abstract brepFromLoft(bottomContour: ContourHandle, topContour: ContourHandle, intermediateContours?: ContourHandle[], options?: {
+        compatibility?: "strict" | "auto";
+        seamAlignment?: "authored" | "auto";
+    }): PluginApiReturn<BrepHandle>;
     /**
      * Create a closed solid **B-rep** from indexed mesh data: a vertex position
      * array plus face loops of indices into it. Host API call — returns a
@@ -571,24 +602,59 @@ export declare abstract class PluginGeomCreateApi {
      */
     abstract brepFromChamfer(brep: BrepHandle, edges: EdgeHandle[], distance: number): PluginApiReturn<BrepHandle>;
     /**
-     * Sweeps a planar profile along an open polyline path, with mitred corners
-     * at each bend. Host API call — returns a new {@linkcode BrepHandle}; the
+     * Sweeps a planar profile along a polyline path, with mitred corners at
+     * each bend. Host API call — returns a new {@linkcode BrepHandle}; the
      * input contour is read-only. The profile must be hole-free and must not
-     * lie in a plane containing the first path segment's direction.
-     *
-     * Runs on the OpenCascade kernel (the first kernel call loads a wasm of
-     * tens of MB — expect a pause of seconds).
+     * lie in a plane containing the first path segment's direction. Repeating
+     * the first point as the last closes the path into a ring solid (a picture
+     * frame): closed paths must be flat and straight-segmented and take a
+     * straight-edged (arc-free) profile — the ring's cross-section is the
+     * authored profile projected along the first leg onto the first mitre
+     * plane, so a profile not perpendicular to the first leg appears sheared.
+     * An optional scale law tapers the sweep: `startScale`/`endScale`
+     * interpolate linearly by arc length, or `scales` gives one factor per path
+     * point (scaling is about the profile centroid). A uniform scale (all
+     * factors equal) works on any path today's sweep accepts; a varying scale
+     * takes straight (collinear) open paths with straight-edged profiles —
+     * tapering across a bend or along an arc edge would create faces Snaptrude
+     * cannot represent and throws (sweep each straight run separately and union
+     * the results instead). An optional `transition` picks the corner
+     * treatment: `"miter"` (default) is today's sharp mitred bend;
+     * `{ bevel: b }` chamfers each turning corner by cutting `b` back along
+     * both adjacent legs (works on open and closed paths — each leg must be
+     * long enough for its cuts). On a corner-less path `transition` has no effect, and the
+     * varying-scale lane takes straight paths, so it never sees a corner.
+     *
+     * Open paths run on the OpenCascade kernel (the first kernel call loads a
+     * wasm of tens of MB — expect a pause of seconds); closed paths are
+     * computed host-side and never load the kernel.
      *
      * Inspect the result via `core.geom.query.brep.*`, or commit it to the scene
      * with `design.create.massFromBrep`.
      *
      * @param profile The cross-section to sweep (hole-free contour)
-     * @param path The polyline path as plain `{x, y, z}` points (≥2, open — first ≠ last)
+     * @param path The polyline path as plain `{x, y, z}` points (≥2; repeat the
+     *   first point as the last to close the path into a ring)
+     * @param options Optional scale law and corner transition. Scale law:
+     *   `startScale`/`endScale` (linear taper by arc length) or `scales` (one
+     *   factor per path point; mutually exclusive with
+     *   `startScale`/`endScale`); every factor must be finite and within
+     *   1e-3..1e3. `transition`: `"miter"` (default, sharp corners) or
+     *   `{ bevel: b }` (chamfered corners, `b` finite within 1e-3..1e3; open
+     *   and closed paths)
      * @returns The swept solid as a new {@linkcode BrepHandle}
      * @throws VALIDATION if the profile has holes, the path has fewer than 2
-     *   points, consecutive path points coincide, the path is closed (open
-     *   paths only in v1), a coordinate is not finite, or the profile plane
-     *   contains the first path segment's direction (degenerate sweep)
+     *   points, consecutive path points coincide, a coordinate is not finite,
+     *   or the profile plane contains the first path segment's direction
+     *   (degenerate sweep); for closed paths, if the ring has fewer than 3
+     *   distinct corners, the path is non-planar, a corner doubles back, the
+     *   profile has an arc edge, or the profile is too large for a mitred
+     *   corner; for scale options, if a factor is outside 1e-3..1e3, `scales`
+     *   is combined with `startScale`/`endScale`, `scales` does not match the
+     *   path length, or a varying scale is used on a bent or closed path or
+     *   with an arc-edged profile; for `{ bevel }`, if a leg is too short for
+     *   the cuts its beveled corners take from it or a corner nearly doubles
+     *   back so its chamfer collapses (the errors name the corner)
      * @throws OPERATION_FAILED if the kernel cannot sweep the profile into a
      *   valid solid or a transition patch is a curved surface Snaptrude cannot
      *   represent
@@ -596,6 +662,10 @@ export declare abstract class PluginGeomCreateApi {
      * @examplePrompt Sweep this profile along the corridor path
      * @examplePrompt Extrude the railing section along this route
      * @examplePrompt Run a duct profile through these points
+     * @examplePrompt Sweep a frame profile around a closed rectangular loop
+     * @examplePrompt Taper this duct from 1x1 to 2x2 along its run
+     * @examplePrompt Sweep a column section that narrows toward the top
+     * @examplePrompt Chamfer the corners of this swept frame by 200mm
      *
      * # Example
      * ```ts
@@ -608,9 +678,33 @@ export declare abstract class PluginGeomCreateApi {
      *   { x: 0, y: 2.8, z: 0 },
      *   { x: 10, y: 2.8, z: 0 },
      * ])
+     * // A closed ring (picture frame): repeat the first point as the last
+     * const frame = await snaptrude.core.geom.create.brepFromSweep(profile, [
+     *   { x: 0, y: 0, z: 0 },
+     *   { x: 0, y: 3, z: 0 },
+     *   { x: 4, y: 3, z: 0 },
+     *   { x: 4, y: 0, z: 0 },
+     *   { x: 0, y: 0, z: 0 },
+     * ])
+     * // A tapered straight run: 0.4x0.4 at the start, 0.8x0.8 at the end
+     * const flue = await snaptrude.core.geom.create.brepFromSweep(
+     *   profile,
+     *   [
+     *     { x: 0, y: 0, z: 0 },
+     *     { x: 0, y: 10, z: 0 },
+     *   ],
+     *   { startScale: 1, endScale: 2 },
+     * )
      * ```
      */
-    abstract brepFromSweep(profile: ContourHandle, path: Vec3Components[]): PluginApiReturn<BrepHandle>;
+    abstract brepFromSweep(profile: ContourHandle, path: Vec3Components[], options?: {
+        startScale?: number;
+        endScale?: number;
+        scales?: number[];
+        transition?: "miter" | {
+            bevel: number;
+        };
+    }): PluginApiReturn<BrepHandle>;
     /**
      * Revolves a planar profile about an axis to make a solid of revolution — a
      * full turn by default. Host API call — returns a new
@@ -793,11 +887,22 @@ export type PluginGeomCreateBrepFromExtrusionArgs = z.infer<typeof PluginGeomCre
  * | `bottomContour` | {@linkcode ContourHandle} | The bottom cross-section |
  * | `topContour` | {@linkcode ContourHandle} | The top cross-section |
  * | `intermediateContours` | {@linkcode ContourHandle}`[]`? | Optional in-between cross-sections, ordered bottom to top |
+ * | `options` | `object`? | Optional behavior switches: `compatibility` (`"strict"` throws on mismatched edge counts instead of auto-matching; default `"auto"`) and `seamAlignment` (`"authored"` keeps the authored correspondence instead of searching seam rotations; default `"auto"`) |
  */
 export declare const PluginGeomCreateBrepFromLoftArgs: z.ZodObject<{
     bottomContour: z.ZodPipe<z.ZodPipe<z.ZodTransform<unknown, unknown>, z.ZodString>, z.ZodTransform<import("../../../..").Handle<"contour">, string>>;
     topContour: z.ZodPipe<z.ZodPipe<z.ZodTransform<unknown, unknown>, z.ZodString>, z.ZodTransform<import("../../../..").Handle<"contour">, string>>;
     intermediateContours: z.ZodOptional<z.ZodArray<z.ZodPipe<z.ZodPipe<z.ZodTransform<unknown, unknown>, z.ZodString>, z.ZodTransform<import("../../../..").Handle<"contour">, string>>>>;
+    options: z.ZodOptional<z.ZodObject<{
+        compatibility: z.ZodOptional<z.ZodEnum<{
+            strict: "strict";
+            auto: "auto";
+        }>>;
+        seamAlignment: z.ZodOptional<z.ZodEnum<{
+            auto: "auto";
+            authored: "authored";
+        }>>;
+    }, z.core.$strip>>;
 }, z.core.$strip>;
 export type PluginGeomCreateBrepFromLoftArgs = z.infer<typeof PluginGeomCreateBrepFromLoftArgs>;
 /**
@@ -920,7 +1025,8 @@ export type PluginGeomCreateBrepFromChamferArgs = z.infer<typeof PluginGeomCreat
  * | Property | Type | Description |
  * |---|---|---|
  * | `profile` | {@linkcode ContourHandle} | The cross-section to sweep (hole-free) |
- * | `path` | {@linkcode Vec3Components}`[]` | The open polyline path (≥2 points, finite components) |
+ * | `path` | {@linkcode Vec3Components}`[]` | The polyline path (≥2 points, finite components; repeating the first point as the last closes it into a ring — closed paths must be flat and straight-segmented and take a straight-edged profile) |
+ * | `options` | `object`? | Optional scale law: `startScale`/`endScale` (linear taper by arc length) or per-point `scales` (mutually exclusive; factors finite, 1e-3..1e3; `scales.length` must equal `path.length`). Optional corner `transition`: `"miter"` (default) or `{ bevel }` (chamfered corners; finite, 1e-3..1e3) |
  */
 export declare const PluginGeomCreateBrepFromSweepArgs: z.ZodObject<{
     profile: z.ZodPipe<z.ZodPipe<z.ZodTransform<unknown, unknown>, z.ZodString>, z.ZodTransform<import("../../../..").Handle<"contour">, string>>;
@@ -929,6 +1035,14 @@ export declare const PluginGeomCreateBrepFromSweepArgs: z.ZodObject<{
         y: z.ZodNumber;
         z: z.ZodNumber;
     }, z.core.$strip>>;
+    options: z.ZodOptional<z.ZodObject<{
+        startScale: z.ZodOptional<z.ZodNumber>;
+        endScale: z.ZodOptional<z.ZodNumber>;
+        scales: z.ZodOptional<z.ZodArray<z.ZodNumber>>;
+        transition: z.ZodOptional<z.ZodUnion<readonly [z.ZodLiteral<"miter">, z.ZodObject<{
+            bevel: z.ZodNumber;
+        }, z.core.$strip>]>>;
+    }, z.core.$strip>>;
 }, z.core.$strip>;
 export type PluginGeomCreateBrepFromSweepArgs = z.infer<typeof PluginGeomCreateBrepFromSweepArgs>;
 /**

package/dist/api/core/geom/create/index.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../../../../src/api/core/geom/create/index.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,CAAC,MAAM,KAAK,CAAA;AACxB,OAAO,EAAE,eAAe,EAAE,MAAM,mBAAmB,CAAA;AACnD,OAAO,EAAE,UAAU,EAAE,UAAU,EAAE,SAAS,EAAE,YAAY,EAAE,WAAW,EAAE,aAAa,EAAE,aAAa,EAAE,UAAU,EAAE,UAAU,EAAE,UAAU,EAAE,cAAc,EAAE,MAAM,qBAAqB,CAAA;AAEpL;;;;;;;;;;GAUG;AACH,8BAAsB,mBAAmB;;IAGvC;;;;;;;;;;;;;;;OAeG;aACa,IAAI,CAAC,UAAU,EAAE,UAAU,EAAE,QAAQ,EAAE,UAAU,GAAG,eAAe,CAAC,UAAU,CAAC;IAE/F;;;;;;;;;;;;;;;;;OAiBG;aACa,GAAG,CACjB,UAAU,EAAE,UAAU,EACtB,QAAQ,EAAE,UAAU,EACpB,WAAW,EAAE,UAAU,EACvB,IAAI,EAAE,UAAU,GACf,eAAe,CAAC,SAAS,CAAC;IAE7B;;;;;;;;;;;;;;;;;OAiBG;aACa,MAAM,CACpB,WAAW,EAAE,UAAU,EACvB,IAAI,EAAE,UAAU,EAChB,MAAM,EAAE,MAAM,GACb,eAAe,CAAC,YAAY,CAAC;IAEhC;;;;;;;;;;;;;;OAcG;aACa,qBAAqB,CAAC,MAAM,EAAE,UAAU,EAAE,GAAG,eAAe,CAAC,aAAa,CAAC;IAE3F;;;;;;;;;;;;;OAaG;aACa,iBAAiB,CAAC,MAAM,EAAE,WAAW,EAAE,GAAG,eAAe,CAAC,aAAa,CAAC;IAExF;;;;;;;;;;;;;;;;;;;;;;OAsBG;aACa,WAAW,CACzB,KAAK,EAAE,MAAM,EACb,KAAK,EAAE,MAAM,EACb,MAAM,CAAC,EAAE,UAAU,GAClB,eAAe,CAAC,aAAa,CAAC;IAEjC;;;;;;;;;OASG;aACa,kBAAkB,CAAC,KAAK,EAAE,aAAa,GAAG,eAAe,CAAC,aAAa,CAAC;IAExF;;;;;;;;;;;;;;;OAeG;aACa,mBAAmB,CACjC,KAAK,EAAE,aAAa,EACpB,KAAK,CAAC,EAAE,aAAa,EAAE,GACtB,eAAe,CAAC,aAAa,CAAC;IAEjC;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OA2CG;aACa,aAAa,CAAC,KAAK,EAAE,cAAc,EAAE,EAAE,GAAG,eAAe,CAAC,UAAU,CAAC;IAErF;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OA8BG;aACa,iBAAiB,CAC/B,OAAO,EAAE,aAAa,EACtB,SAAS,EAAE,cAAc,EACzB,MAAM,EAAE,MAAM,GACb,eAAe,CAAC,UAAU,CAAC;IAE9B;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OA4CG;aACa,YAAY,CAC1B,aAAa,EAAE,aAAa,EAC5B,UAAU,EAAE,aAAa,EACzB,oBAAoB,CAAC,EAAE,aAAa,EAAE,GACrC,eAAe,CAAC,UAAU,CAAC;IAE9B;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OAsCG;aACa,YAAY,CAC1B,SAAS,EAAE,cAAc,EAAE,EAC3B,KAAK,EAAE,MAAM,EAAE,EAAE,GAChB,eAAe,CAAC,UAAU,CAAC;IAE9B;;;;;;;;;;;;;;;;;;;;;;;;;;;OA2BG;aACa,aAAa,CAAC,CAAC,EAAE,UAAU,EAAE,CAAC,EAAE,UAAU,GAAG,eAAe,CAAC,UAAU,CAAC;IAExF;;;;;;;;;;;;;;;;;;;;;;;;;;;OA2BG;aACa,mBAAmB,CAAC,CAAC,EAAE,UAAU,EAAE,CAAC,EAAE,UAAU,GAAG,eAAe,CAAC,UAAU,CAAC;IAE9F;;;;;;;;;;;;;;;;;;;;;;;;;OAyBG;aACa,oBAAoB,CAAC,CAAC,EAAE,UAAU,EAAE,CAAC,EAAE,UAAU,GAAG,eAAe,CAAC,UAAU,CAAC;IAE/F;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OAkCG;aACa,cAAc,CAC5B,IAAI,EAAE,UAAU,EAChB,KAAK,EAAE,UAAU,EAAE,EACnB,MAAM,EAAE,MAAM,GACb,eAAe,CAAC,UAAU,CAAC;IAE9B;;;;;;;;;;;;;;;;;;;;;;;;;;;;OA4BG;aACa,cAAc,CAAC,IAAI,EAAE,UAAU,EAAE,QAAQ,EAAE,MAAM,GAAG,eAAe,CAAC,UAAU,CAAC;IAE/F;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OAgCG;aACa,aAAa,CAC3B,IAAI,EAAE,UAAU,EAChB,SAAS,EAAE,UAAU,EAAE,EACvB,SAAS,EAAE,MAAM,GAChB,eAAe,CAAC,UAAU,CAAC;IAE9B;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OAiCG;aACa,cAAc,CAC5B,IAAI,EAAE,UAAU,EAChB,WAAW,EAAE,cAAc,EAC3B,WAAW,EAAE,cAAc,GAC1B,eAAe,CAAC,UAAU,EAAE,CAAC;IAEhC;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OAiCG;aACa,eAAe,CAC7B,IAAI,EAAE,UAAU,EAChB,KAAK,EAAE,UAAU,EAAE,EACnB,QAAQ,EAAE,MAAM,GACf,eAAe,CAAC,UAAU,CAAC;IAE9B;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OAuCG;aACa,aAAa,CAC3B,OAAO,EAAE,aAAa,EACtB,IAAI,EAAE,cAAc,EAAE,GACrB,eAAe,CAAC,UAAU,CAAC;IAE9B;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OA8CG;aACa,kBAAkB,CAChC,OAAO,EAAE,aAAa,EACtB,UAAU,EAAE,cAAc,EAC1B,aAAa,EAAE,cAAc,EAC7B,cAAc,CAAC,EAAE,MAAM,GACtB,eAAe,CAAC,UAAU,CAAC;CAC/B;AAED;;;;;;;GAOG;AACH,eAAO,MAAM,wBAAwB;;;iBAGnC,CAAA;AAEF,MAAM,MAAM,wBAAwB,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,wBAAwB,CAAC,CAAA;AAE/E;;;;;;;;;GASG;AACH,eAAO,MAAM,uBAAuB;;;;;iBAKlC,CAAA;AAEF,MAAM,MAAM,uBAAuB,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,uBAAuB,CAAC,CAAA;AAE7E;;;;;;;;GAQG;AACH,eAAO,MAAM,0BAA0B;;;;iBAIrC,CAAA;AAEF,MAAM,MAAM,0BAA0B,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,0BAA0B,CAAC,CAAA;AAEnF;;;;;;GAMG;AACH,eAAO,MAAM,yCAAyC;;iBAEpD,CAAA;AAEF,MAAM,MAAM,yCAAyC,GAAG,CAAC,CAAC,KAAK,CAC7D,OAAO,yCAAyC,CACjD,CAAA;AAED;;;;;;GAMG;AACH,eAAO,MAAM,qCAAqC;;iBAEhD,CAAA;AAEF,MAAM,MAAM,qCAAqC,GAAG,CAAC,CAAC,KAAK,CACzD,OAAO,qCAAqC,CAC7C,CAAA;AAED;;;;;;GAMG;AACH,eAAO,MAAM,sCAAsC;;iBAEjD,CAAA;AAEF,MAAM,MAAM,sCAAsC,GAAG,CAAC,CAAC,KAAK,CAC1D,OAAO,sCAAsC,CAC9C,CAAA;AAED;;;;;;;GAOG;AACH,eAAO,MAAM,uCAAuC;;;iBAGlD,CAAA;AAEF,MAAM,MAAM,uCAAuC,GAAG,CAAC,CAAC,KAAK,CAC3D,OAAO,uCAAuC,CAC/C,CAAA;AAED;;;;;;GAMG;AACH,eAAO,MAAM,iCAAiC;;;;;;iBAE5C,CAAA;AAEF,MAAM,MAAM,iCAAiC,GAAG,CAAC,CAAC,KAAK,CACrD,OAAO,iCAAiC,CACzC,CAAA;AAED;;;;;;;;GAQG;AACH,eAAO,MAAM,qCAAqC;;;;;;;;iBAWhD,CAAA;AAEF,MAAM,MAAM,qCAAqC,GAAG,CAAC,CAAC,KAAK,CACzD,OAAO,qCAAqC,CAC7C,CAAA;AAED;;;;;;;;GAQG;AACH,eAAO,MAAM,gCAAgC;;;;iBAI3C,CAAA;AAEF,MAAM,MAAM,gCAAgC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,gCAAgC,CAAC,CAAA;AAE/F;;;;;;;GAOG;AACH,eAAO,MAAM,gCAAgC;;;;;;;iBAG3C,CAAA;AAEF,MAAM,MAAM,gCAAgC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,gCAAgC,CAAC,CAAA;AAE/F;;;;;;;;;;GAUG;AACH,eAAO,MAAM,+BAA+B;;;iBAG1C,CAAA;AAEF,MAAM,MAAM,+BAA+B,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,+BAA+B,CAAC,CAAA;AAS7F;;;;;;;;GAQG;AACH,eAAO,MAAM,kCAAkC;;;;iBAI7C,CAAA;AAEF,MAAM,MAAM,kCAAkC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,kCAAkC,CAAC,CAAA;AAEnG;;;;;;;GAOG;AACH,eAAO,MAAM,kCAAkC;;;iBAM7C,CAAA;AAEF,MAAM,MAAM,kCAAkC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,kCAAkC,CAAC,CAAA;AAEnG;;;;;;;;GAQG;AACH,eAAO,MAAM,iCAAiC;;;;iBAI5C,CAAA;AAEF,MAAM,MAAM,iCAAiC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,iCAAiC,CAAC,CAAA;AAEjG;;;;;;;;GAQG;AACH,eAAO,MAAM,kCAAkC;;;;;;;;;;;;iBAI7C,CAAA;AAEF,MAAM,MAAM,kCAAkC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,kCAAkC,CAAC,CAAA;AAEnG;;;;;;;;GAQG;AACH,eAAO,MAAM,mCAAmC;;;;iBAI9C,CAAA;AAEF,MAAM,MAAM,mCAAmC,GAAG,CAAC,CAAC,KAAK,CACvD,OAAO,mCAAmC,CAC3C,CAAA;AAED;;;;;;;GAOG;AACH,eAAO,MAAM,iCAAiC;;;;;;;iBAG5C,CAAA;AAEF,MAAM,MAAM,iCAAiC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,iCAAiC,CAAC,CAAA;AAEjG;;;;;;;;;GASG;AACH,eAAO,MAAM,sCAAsC;;;;;;;;;;;;;iBAKjD,CAAA;AAEF,MAAM,MAAM,sCAAsC,GAAG,CAAC,CAAC,KAAK,CAC1D,OAAO,sCAAsC,CAC9C,CAAA"}
+{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../../../../src/api/core/geom/create/index.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,CAAC,MAAM,KAAK,CAAA;AACxB,OAAO,EAAE,eAAe,EAAE,MAAM,mBAAmB,CAAA;AACnD,OAAO,EAAE,UAAU,EAAE,UAAU,EAAE,SAAS,EAAE,YAAY,EAAE,WAAW,EAAE,aAAa,EAAE,aAAa,EAAE,UAAU,EAAE,UAAU,EAAE,UAAU,EAAE,cAAc,EAAE,MAAM,qBAAqB,CAAA;AAEpL;;;;;;;;;;GAUG;AACH,8BAAsB,mBAAmB;;IAGvC;;;;;;;;;;;;;;;OAeG;aACa,IAAI,CAAC,UAAU,EAAE,UAAU,EAAE,QAAQ,EAAE,UAAU,GAAG,eAAe,CAAC,UAAU,CAAC;IAE/F;;;;;;;;;;;;;;;;;OAiBG;aACa,GAAG,CACjB,UAAU,EAAE,UAAU,EACtB,QAAQ,EAAE,UAAU,EACpB,WAAW,EAAE,UAAU,EACvB,IAAI,EAAE,UAAU,GACf,eAAe,CAAC,SAAS,CAAC;IAE7B;;;;;;;;;;;;;;;;;OAiBG;aACa,MAAM,CACpB,WAAW,EAAE,UAAU,EACvB,IAAI,EAAE,UAAU,EAChB,MAAM,EAAE,MAAM,GACb,eAAe,CAAC,YAAY,CAAC;IAEhC;;;;;;;;;;;;;;OAcG;aACa,qBAAqB,CAAC,MAAM,EAAE,UAAU,EAAE,GAAG,eAAe,CAAC,aAAa,CAAC;IAE3F;;;;;;;;;;;;;OAaG;aACa,iBAAiB,CAAC,MAAM,EAAE,WAAW,EAAE,GAAG,eAAe,CAAC,aAAa,CAAC;IAExF;;;;;;;;;;;;;;;;;;;;;;OAsBG;aACa,WAAW,CACzB,KAAK,EAAE,MAAM,EACb,KAAK,EAAE,MAAM,EACb,MAAM,CAAC,EAAE,UAAU,GAClB,eAAe,CAAC,aAAa,CAAC;IAEjC;;;;;;;;;OASG;aACa,kBAAkB,CAAC,KAAK,EAAE,aAAa,GAAG,eAAe,CAAC,aAAa,CAAC;IAExF;;;;;;;;;;;;;;;OAeG;aACa,mBAAmB,CACjC,KAAK,EAAE,aAAa,EACpB,KAAK,CAAC,EAAE,aAAa,EAAE,GACtB,eAAe,CAAC,aAAa,CAAC;IAEjC;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OA2CG;aACa,aAAa,CAAC,KAAK,EAAE,cAAc,EAAE,EAAE,GAAG,eAAe,CAAC,UAAU,CAAC;IAErF;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OA8BG;aACa,iBAAiB,CAC/B,OAAO,EAAE,aAAa,EACtB,SAAS,EAAE,cAAc,EACzB,MAAM,EAAE,MAAM,GACb,eAAe,CAAC,UAAU,CAAC;IAE9B;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OAwEG;aACa,YAAY,CAC1B,aAAa,EAAE,aAAa,EAC5B,UAAU,EAAE,aAAa,EACzB,oBAAoB,CAAC,EAAE,aAAa,EAAE,EACtC,OAAO,CAAC,EAAE;QAAE,aAAa,CAAC,EAAE,QAAQ,GAAG,MAAM,CAAC;QAAC,aAAa,CAAC,EAAE,UAAU,GAAG,MAAM,CAAA;KAAE,GACnF,eAAe,CAAC,UAAU,CAAC;IAE9B;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OAsCG;aACa,YAAY,CAC1B,SAAS,EAAE,cAAc,EAAE,EAC3B,KAAK,EAAE,MAAM,EAAE,EAAE,GAChB,eAAe,CAAC,UAAU,CAAC;IAE9B;;;;;;;;;;;;;;;;;;;;;;;;;;;OA2BG;aACa,aAAa,CAAC,CAAC,EAAE,UAAU,EAAE,CAAC,EAAE,UAAU,GAAG,eAAe,CAAC,UAAU,CAAC;IAExF;;;;;;;;;;;;;;;;;;;;;;;;;;;OA2BG;aACa,mBAAmB,CAAC,CAAC,EAAE,UAAU,EAAE,CAAC,EAAE,UAAU,GAAG,eAAe,CAAC,UAAU,CAAC;IAE9F;;;;;;;;;;;;;;;;;;;;;;;;;OAyBG;aACa,oBAAoB,CAAC,CAAC,EAAE,UAAU,EAAE,CAAC,EAAE,UAAU,GAAG,eAAe,CAAC,UAAU,CAAC;IAE/F;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OAkCG;aACa,cAAc,CAC5B,IAAI,EAAE,UAAU,EAChB,KAAK,EAAE,UAAU,EAAE,EACnB,MAAM,EAAE,MAAM,GACb,eAAe,CAAC,UAAU,CAAC;IAE9B;;;;;;;;;;;;;;;;;;;;;;;;;;;;OA4BG;aACa,cAAc,CAAC,IAAI,EAAE,UAAU,EAAE,QAAQ,EAAE,MAAM,GAAG,eAAe,CAAC,UAAU,CAAC;IAE/F;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OAgCG;aACa,aAAa,CAC3B,IAAI,EAAE,UAAU,EAChB,SAAS,EAAE,UAAU,EAAE,EACvB,SAAS,EAAE,MAAM,GAChB,eAAe,CAAC,UAAU,CAAC;IAE9B;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OAiCG;aACa,cAAc,CAC5B,IAAI,EAAE,UAAU,EAChB,WAAW,EAAE,cAAc,EAC3B,WAAW,EAAE,cAAc,GAC1B,eAAe,CAAC,UAAU,EAAE,CAAC;IAEhC;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OAiCG;aACa,eAAe,CAC7B,IAAI,EAAE,UAAU,EAChB,KAAK,EAAE,UAAU,EAAE,EACnB,QAAQ,EAAE,MAAM,GACf,eAAe,CAAC,UAAU,CAAC;IAE9B;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OA+FG;aACa,aAAa,CAC3B,OAAO,EAAE,aAAa,EACtB,IAAI,EAAE,cAAc,EAAE,EACtB,OAAO,CAAC,EAAE;QACR,UAAU,CAAC,EAAE,MAAM,CAAA;QACnB,QAAQ,CAAC,EAAE,MAAM,CAAA;QACjB,MAAM,CAAC,EAAE,MAAM,EAAE,CAAA;QACjB,UAAU,CAAC,EAAE,OAAO,GAAG;YAAE,KAAK,EAAE,MAAM,CAAA;SAAE,CAAA;KACzC,GACA,eAAe,CAAC,UAAU,CAAC;IAE9B;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OA8CG;aACa,kBAAkB,CAChC,OAAO,EAAE,aAAa,EACtB,UAAU,EAAE,cAAc,EAC1B,aAAa,EAAE,cAAc,EAC7B,cAAc,CAAC,EAAE,MAAM,GACtB,eAAe,CAAC,UAAU,CAAC;CAC/B;AAED;;;;;;;GAOG;AACH,eAAO,MAAM,wBAAwB;;;iBAGnC,CAAA;AAEF,MAAM,MAAM,wBAAwB,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,wBAAwB,CAAC,CAAA;AAE/E;;;;;;;;;GASG;AACH,eAAO,MAAM,uBAAuB;;;;;iBAKlC,CAAA;AAEF,MAAM,MAAM,uBAAuB,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,uBAAuB,CAAC,CAAA;AAE7E;;;;;;;;GAQG;AACH,eAAO,MAAM,0BAA0B;;;;iBAIrC,CAAA;AAEF,MAAM,MAAM,0BAA0B,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,0BAA0B,CAAC,CAAA;AAEnF;;;;;;GAMG;AACH,eAAO,MAAM,yCAAyC;;iBAEpD,CAAA;AAEF,MAAM,MAAM,yCAAyC,GAAG,CAAC,CAAC,KAAK,CAC7D,OAAO,yCAAyC,CACjD,CAAA;AAED;;;;;;GAMG;AACH,eAAO,MAAM,qCAAqC;;iBAEhD,CAAA;AAEF,MAAM,MAAM,qCAAqC,GAAG,CAAC,CAAC,KAAK,CACzD,OAAO,qCAAqC,CAC7C,CAAA;AAED;;;;;;GAMG;AACH,eAAO,MAAM,sCAAsC;;iBAEjD,CAAA;AAEF,MAAM,MAAM,sCAAsC,GAAG,CAAC,CAAC,KAAK,CAC1D,OAAO,sCAAsC,CAC9C,CAAA;AAED;;;;;;;GAOG;AACH,eAAO,MAAM,uCAAuC;;;iBAGlD,CAAA;AAEF,MAAM,MAAM,uCAAuC,GAAG,CAAC,CAAC,KAAK,CAC3D,OAAO,uCAAuC,CAC/C,CAAA;AAED;;;;;;GAMG;AACH,eAAO,MAAM,iCAAiC;;;;;;iBAE5C,CAAA;AAEF,MAAM,MAAM,iCAAiC,GAAG,CAAC,CAAC,KAAK,CACrD,OAAO,iCAAiC,CACzC,CAAA;AAED;;;;;;;;GAQG;AACH,eAAO,MAAM,qCAAqC;;;;;;;;iBAWhD,CAAA;AAEF,MAAM,MAAM,qCAAqC,GAAG,CAAC,CAAC,KAAK,CACzD,OAAO,qCAAqC,CAC7C,CAAA;AAED;;;;;;;;;GASG;AACH,eAAO,MAAM,gCAAgC;;;;;;;;;;;;;;iBAU3C,CAAA;AAEF,MAAM,MAAM,gCAAgC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,gCAAgC,CAAC,CAAA;AAE/F;;;;;;;GAOG;AACH,eAAO,MAAM,gCAAgC;;;;;;;iBAG3C,CAAA;AAEF,MAAM,MAAM,gCAAgC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,gCAAgC,CAAC,CAAA;AAE/F;;;;;;;;;;GAUG;AACH,eAAO,MAAM,+BAA+B;;;iBAG1C,CAAA;AAEF,MAAM,MAAM,+BAA+B,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,+BAA+B,CAAC,CAAA;AAS7F;;;;;;;;GAQG;AACH,eAAO,MAAM,kCAAkC;;;;iBAI7C,CAAA;AAEF,MAAM,MAAM,kCAAkC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,kCAAkC,CAAC,CAAA;AAEnG;;;;;;;GAOG;AACH,eAAO,MAAM,kCAAkC;;;iBAM7C,CAAA;AAEF,MAAM,MAAM,kCAAkC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,kCAAkC,CAAC,CAAA;AAEnG;;;;;;;;GAQG;AACH,eAAO,MAAM,iCAAiC;;;;iBAI5C,CAAA;AAEF,MAAM,MAAM,iCAAiC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,iCAAiC,CAAC,CAAA;AAEjG;;;;;;;;GAQG;AACH,eAAO,MAAM,kCAAkC;;;;;;;;;;;;iBAI7C,CAAA;AAEF,MAAM,MAAM,kCAAkC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,kCAAkC,CAAC,CAAA;AAEnG;;;;;;;;GAQG;AACH,eAAO,MAAM,mCAAmC;;;;iBAI9C,CAAA;AAEF,MAAM,MAAM,mCAAmC,GAAG,CAAC,CAAC,KAAK,CACvD,OAAO,mCAAmC,CAC3C,CAAA;AAMD;;;;;;;;GAQG;AACH,eAAO,MAAM,iCAAiC;;;;;;;;;;;;;;;iBAiC1C,CAAA;AAEJ,MAAM,MAAM,iCAAiC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,iCAAiC,CAAC,CAAA;AAEjG;;;;;;;;;GASG;AACH,eAAO,MAAM,sCAAsC;;;;;;;;;;;;;iBAKjD,CAAA;AAEF,MAAM,MAAM,sCAAsC,GAAG,CAAC,CAAC,KAAK,CAC1D,OAAO,sCAAsC,CAC9C,CAAA"}

package/dist/api/core/geom/query/brep.d.ts

@@ -134,6 +134,61 @@ export declare abstract class PluginGeomQueryBrepApi {
      * ```
      */
     abstract listEdgesBetween(brep: BrepHandle, vertexIndexA: number, vertexIndexB: number): PluginApiReturn<EdgeHandle[]>;
+    /**
+     * Read the exact curve of a brep edge as plain values — a discriminated
+     * union on `type`. Pure read: no geometry kernel is loaded. Points and
+     * directions are {@linkcode Vec3Components}; lengths and radii are raw
+     * Babylon units.
+     *
+     * | `type` | Fields |
+     * |---|---|
+     * | `"line"` | `startPoint`, `endPoint`, `length` |
+     * | `"arc"` | `startPoint`, `endPoint`, `centre`, `axis`, `radius`, `length` |
+     * | `"circle"` | `centre`, `axis`, `radius`, `length` — a full-circle edge (e.g. a cylinder cap rim) |
+     *
+     * @param brep The brep the edge belongs to
+     * @param edge The edge whose curve to read
+     * @returns The curve data as a discriminated union on `type` (see table above)
+     * @throws VALIDATION if the edge is not on `brep`
+     *
+     * @examplePrompt Read the radius of this curved edge
+     * @examplePrompt Is this edge straight or an arc?
+     * @examplePrompt Get the exact start and end points of this edge
+     * @examplePrompt Measure the length of each edge of this mass
+     *
+     * # Example
+     * ```ts
+     * const [mass] = await snaptrude.design.query.listMasses()
+     * const brep = await snaptrude.design.query.geometry.getBrep(mass)
+     * if (brep) {
+     *   const edges = await snaptrude.core.geom.query.brep.listEdges(brep)
+     *   for (const edge of edges) {
+     *     const curve = await snaptrude.core.geom.query.brep.getEdgeCurve(brep, edge)
+     *     if (curve.type === "arc") console.log("arc radius:", curve.radius)
+     *   }
+     * }
+     * ```
+     */
+    abstract getEdgeCurve(brep: BrepHandle, edge: EdgeHandle): PluginApiReturn<{
+        type: "line";
+        startPoint: Vec3Components;
+        endPoint: Vec3Components;
+        length: number;
+    } | {
+        type: "arc";
+        startPoint: Vec3Components;
+        endPoint: Vec3Components;
+        centre: Vec3Components;
+        axis: Vec3Components;
+        radius: number;
+        length: number;
+    } | {
+        type: "circle";
+        centre: Vec3Components;
+        axis: Vec3Components;
+        radius: number;
+        length: number;
+    }>;
     /**
      * Get the position of a vertex within a brep.
      * @param brep The brep to query
@@ -369,6 +424,19 @@ export declare const PluginGeomQueryBrepListEdgesBetweenArgs: z.ZodObject<{
     vertexIndexB: z.ZodNumber;
 }, z.core.$strip>;
 export type PluginGeomQueryBrepListEdgesBetweenArgs = z.infer<typeof PluginGeomQueryBrepListEdgesBetweenArgs>;
+/**
+ * Arguments for {@linkcode PluginGeomQueryBrepApi.getEdgeCurve}.
+ *
+ * | Property | Type | Description |
+ * |---|---|---|
+ * | `brep` | {@linkcode BrepHandle} | The brep the edge belongs to |
+ * | `edge` | {@linkcode EdgeHandle} | The edge whose curve to read |
+ */
+export declare const PluginGeomQueryBrepGetEdgeCurveArgs: z.ZodObject<{
+    brep: z.ZodPipe<z.ZodPipe<z.ZodTransform<unknown, unknown>, z.ZodString>, z.ZodTransform<import("../../../..").Handle<"brep">, string>>;
+    edge: z.ZodPipe<z.ZodPipe<z.ZodTransform<unknown, unknown>, z.ZodString>, z.ZodTransform<import("../../../..").Handle<"edge">, string>>;
+}, z.core.$strip>;
+export type PluginGeomQueryBrepGetEdgeCurveArgs = z.infer<typeof PluginGeomQueryBrepGetEdgeCurveArgs>;
 /**
  * Arguments for {@linkcode PluginGeomQueryBrepApi.getVertexPosition}.
  *

package/dist/api/core/geom/query/brep.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"brep.d.ts","sourceRoot":"","sources":["../../../../../src/api/core/geom/query/brep.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,CAAC,MAAM,KAAK,CAAA;AACxB,OAAO,EAAE,eAAe,EAAE,MAAM,mBAAmB,CAAA;AACnD,OAAO,EACL,UAAU,EACV,UAAU,EACV,UAAU,EACV,YAAY,EACZ,cAAc,EACd,cAAc,EACd,cAAc,EACf,MAAM,qBAAqB,CAAA;AAE5B;;;;;;;;;;;;GAYG;AACH,8BAAsB,sBAAsB;;IAG1C;;;;;;;;;;;;;OAaG;aACa,SAAS,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,UAAU,EAAE,CAAC;IAE1E;;;;;;;;;;;;;OAaG;aACa,SAAS,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,UAAU,EAAE,CAAC;IAE1E;;;;;;;;;;;;;OAaG;aACa,YAAY,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,YAAY,EAAE,CAAC;IAE/E;;;;;;;;;;;;;OAaG;aACa,aAAa,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,cAAc,EAAE,CAAC;IAElF;;;;;;;;;;;;;;;;;;;OAmBG;aACa,OAAO,CACrB,IAAI,EAAE,UAAU,EAChB,YAAY,EAAE,MAAM,EACpB,YAAY,EAAE,MAAM,GACnB,eAAe,CAAC,UAAU,GAAG,IAAI,CAAC;IAErC;;;;;;;;;;;;;;;;OAgBG;aACa,OAAO,CACrB,IAAI,EAAE,UAAU,EAChB,YAAY,EAAE,MAAM,EACpB,YAAY,EAAE,MAAM,GACnB,eAAe,CAAC,OAAO,CAAC;IAE3B;;;;;;;;;;;;;;;;;OAiBG;aACa,gBAAgB,CAC9B,IAAI,EAAE,UAAU,EAChB,YAAY,EAAE,MAAM,EACpB,YAAY,EAAE,MAAM,GACnB,eAAe,CAAC,UAAU,EAAE,CAAC;IAEhC;;;;;;;;;;;;;;;OAeG;aACa,iBAAiB,CAC/B,IAAI,EAAE,UAAU,EAChB,MAAM,EAAE,YAAY,GACnB,eAAe,CAAC,cAAc,CAAC;IAElC;;;;;;;;;;;;;;;;;OAiBG;aACa,mBAAmB,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,cAAc,EAAE,CAAC;IAExF;;;;;;;;;;;;;;;;;OAiBG;aACa,WAAW,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,cAAc,CAAC;IAE9E;;;;;;;;;;;;;OAaG;aACa,YAAY,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,MAAM,CAAC;IAEvE;;;;;;;;;;;;;OAaG;aACa,YAAY,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,MAAM,CAAC;IAEvE;;;;;;;;;;;;;OAaG;aACa,cAAc,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,MAAM,CAAC;IAEzE;;;;;;;;;;;;;OAaG;aACa,gBAAgB,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,MAAM,CAAC;IAE3E;;;;;;;;;;;;;;;;;OAiBG;aACa,cAAc,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,cAAc,CAAC;IAEjF;;;;;;;;;;;;;;;;;;OAkBG;aACa,OAAO,CAAC,KAAK,EAAE,UAAU,EAAE,KAAK,EAAE,UAAU,GAAG,eAAe,CAAC,OAAO,CAAC;IAEvF;;;;;;;;;;;;;;;;;;;;;;;;;OAyBG;aACa,WAAW,CACzB,KAAK,EAAE,UAAU,EACjB,KAAK,EAAE,UAAU,GAChB,eAAe,CAAC;QAAE,QAAQ,EAAE,MAAM,CAAC;QAAC,MAAM,EAAE,cAAc,CAAC;QAAC,MAAM,EAAE,cAAc,CAAA;KAAE,CAAC;CACzF;AASD,yFAAyF;AACzF,eAAO,MAAM,gCAAgC;;iBAAU,CAAA;AACvD,MAAM,MAAM,gCAAgC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,gCAAgC,CAAC,CAAA;AAE/F,yFAAyF;AACzF,eAAO,MAAM,gCAAgC;;iBAAU,CAAA;AACvD,MAAM,MAAM,gCAAgC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,gCAAgC,CAAC,CAAA;AAE/F,4FAA4F;AAC5F,eAAO,MAAM,mCAAmC;;iBAAU,CAAA;AAC1D,MAAM,MAAM,mCAAmC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,mCAAmC,CAAC,CAAA;AAErG,6FAA6F;AAC7F,eAAO,MAAM,oCAAoC;;iBAAU,CAAA;AAC3D,MAAM,MAAM,oCAAoC,GAAG,CAAC,CAAC,KAAK,CACxD,OAAO,oCAAoC,CAC5C,CAAA;AAED;;;;;;;;GAQG;AACH,eAAO,MAAM,8BAA8B;;;;iBAAc,CAAA;AACzD,MAAM,MAAM,8BAA8B,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,8BAA8B,CAAC,CAAA;AAE3F,uGAAuG;AACvG,eAAO,MAAM,8BAA8B;;;;iBAAc,CAAA;AACzD,MAAM,MAAM,8BAA8B,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,8BAA8B,CAAC,CAAA;AAE3F,gHAAgH;AAChH,eAAO,MAAM,uCAAuC;;;;iBAAc,CAAA;AAClE,MAAM,MAAM,uCAAuC,GAAG,CAAC,CAAC,KAAK,CAC3D,OAAO,uCAAuC,CAC/C,CAAA;AAED;;;;;;;GAOG;AACH,eAAO,MAAM,wCAAwC;;;iBAGnD,CAAA;AACF,MAAM,MAAM,wCAAwC,GAAG,CAAC,CAAC,KAAK,CAC5D,OAAO,wCAAwC,CAChD,CAAA;AAED,mGAAmG;AACnG,eAAO,MAAM,0CAA0C;;iBAAU,CAAA;AACjE,MAAM,MAAM,0CAA0C,GAAG,CAAC,CAAC,KAAK,CAC9D,OAAO,0CAA0C,CAClD,CAAA;AAED,2FAA2F;AAC3F,eAAO,MAAM,kCAAkC;;iBAAU,CAAA;AACzD,MAAM,MAAM,kCAAkC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,kCAAkC,CAAC,CAAA;AAEnG,4FAA4F;AAC5F,eAAO,MAAM,mCAAmC;;iBAAU,CAAA;AAC1D,MAAM,MAAM,mCAAmC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,mCAAmC,CAAC,CAAA;AAErG,4FAA4F;AAC5F,eAAO,MAAM,mCAAmC;;iBAAU,CAAA;AAC1D,MAAM,MAAM,mCAAmC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,mCAAmC,CAAC,CAAA;AAErG,8FAA8F;AAC9F,eAAO,MAAM,qCAAqC;;iBAAU,CAAA;AAC5D,MAAM,MAAM,qCAAqC,GAAG,CAAC,CAAC,KAAK,CACzD,OAAO,qCAAqC,CAC7C,CAAA;AAED,gGAAgG;AAChG,eAAO,MAAM,uCAAuC;;iBAAU,CAAA;AAC9D,MAAM,MAAM,uCAAuC,GAAG,CAAC,CAAC,KAAK,CAC3D,OAAO,uCAAuC,CAC/C,CAAA;AAED,8FAA8F;AAC9F,eAAO,MAAM,qCAAqC;;iBAAU,CAAA;AAC5D,MAAM,MAAM,qCAAqC,GAAG,CAAC,CAAC,KAAK,CACzD,OAAO,qCAAqC,CAC7C,CAAA;AAED;;;;;;;GAOG;AACH,eAAO,MAAM,8BAA8B;;;iBAGzC,CAAA;AACF,MAAM,MAAM,8BAA8B,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,8BAA8B,CAAC,CAAA;AAE3F;;;;;;;GAOG;AACH,eAAO,MAAM,kCAAkC;;;iBAG7C,CAAA;AACF,MAAM,MAAM,kCAAkC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,kCAAkC,CAAC,CAAA"}
+{"version":3,"file":"brep.d.ts","sourceRoot":"","sources":["../../../../../src/api/core/geom/query/brep.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,CAAC,MAAM,KAAK,CAAA;AACxB,OAAO,EAAE,eAAe,EAAE,MAAM,mBAAmB,CAAA;AACnD,OAAO,EACL,UAAU,EACV,UAAU,EACV,UAAU,EACV,YAAY,EACZ,cAAc,EACd,cAAc,EACd,cAAc,EACf,MAAM,qBAAqB,CAAA;AAE5B;;;;;;;;;;;;GAYG;AACH,8BAAsB,sBAAsB;;IAG1C;;;;;;;;;;;;;OAaG;aACa,SAAS,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,UAAU,EAAE,CAAC;IAE1E;;;;;;;;;;;;;OAaG;aACa,SAAS,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,UAAU,EAAE,CAAC;IAE1E;;;;;;;;;;;;;OAaG;aACa,YAAY,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,YAAY,EAAE,CAAC;IAE/E;;;;;;;;;;;;;OAaG;aACa,aAAa,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,cAAc,EAAE,CAAC;IAElF;;;;;;;;;;;;;;;;;;;OAmBG;aACa,OAAO,CACrB,IAAI,EAAE,UAAU,EAChB,YAAY,EAAE,MAAM,EACpB,YAAY,EAAE,MAAM,GACnB,eAAe,CAAC,UAAU,GAAG,IAAI,CAAC;IAErC;;;;;;;;;;;;;;;;OAgBG;aACa,OAAO,CACrB,IAAI,EAAE,UAAU,EAChB,YAAY,EAAE,MAAM,EACpB,YAAY,EAAE,MAAM,GACnB,eAAe,CAAC,OAAO,CAAC;IAE3B;;;;;;;;;;;;;;;;;OAiBG;aACa,gBAAgB,CAC9B,IAAI,EAAE,UAAU,EAChB,YAAY,EAAE,MAAM,EACpB,YAAY,EAAE,MAAM,GACnB,eAAe,CAAC,UAAU,EAAE,CAAC;IAEhC;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OAkCG;aACa,YAAY,CAC1B,IAAI,EAAE,UAAU,EAChB,IAAI,EAAE,UAAU,GACf,eAAe,CACd;QAAE,IAAI,EAAE,MAAM,CAAC;QAAC,UAAU,EAAE,cAAc,CAAC;QAAC,QAAQ,EAAE,cAAc,CAAC;QAAC,MAAM,EAAE,MAAM,CAAA;KAAE,GACtF;QACE,IAAI,EAAE,KAAK,CAAA;QACX,UAAU,EAAE,cAAc,CAAA;QAC1B,QAAQ,EAAE,cAAc,CAAA;QACxB,MAAM,EAAE,cAAc,CAAA;QACtB,IAAI,EAAE,cAAc,CAAA;QACpB,MAAM,EAAE,MAAM,CAAA;QACd,MAAM,EAAE,MAAM,CAAA;KACf,GACD;QACE,IAAI,EAAE,QAAQ,CAAA;QACd,MAAM,EAAE,cAAc,CAAA;QACtB,IAAI,EAAE,cAAc,CAAA;QACpB,MAAM,EAAE,MAAM,CAAA;QACd,MAAM,EAAE,MAAM,CAAA;KACf,CACJ;IAED;;;;;;;;;;;;;;;OAeG;aACa,iBAAiB,CAC/B,IAAI,EAAE,UAAU,EAChB,MAAM,EAAE,YAAY,GACnB,eAAe,CAAC,cAAc,CAAC;IAElC;;;;;;;;;;;;;;;;;OAiBG;aACa,mBAAmB,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,cAAc,EAAE,CAAC;IAExF;;;;;;;;;;;;;;;;;OAiBG;aACa,WAAW,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,cAAc,CAAC;IAE9E;;;;;;;;;;;;;OAaG;aACa,YAAY,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,MAAM,CAAC;IAEvE;;;;;;;;;;;;;OAaG;aACa,YAAY,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,MAAM,CAAC;IAEvE;;;;;;;;;;;;;OAaG;aACa,cAAc,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,MAAM,CAAC;IAEzE;;;;;;;;;;;;;OAaG;aACa,gBAAgB,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,MAAM,CAAC;IAE3E;;;;;;;;;;;;;;;;;OAiBG;aACa,cAAc,CAAC,IAAI,EAAE,UAAU,GAAG,eAAe,CAAC,cAAc,CAAC;IAEjF;;;;;;;;;;;;;;;;;;OAkBG;aACa,OAAO,CAAC,KAAK,EAAE,UAAU,EAAE,KAAK,EAAE,UAAU,GAAG,eAAe,CAAC,OAAO,CAAC;IAEvF;;;;;;;;;;;;;;;;;;;;;;;;;OAyBG;aACa,WAAW,CACzB,KAAK,EAAE,UAAU,EACjB,KAAK,EAAE,UAAU,GAChB,eAAe,CAAC;QAAE,QAAQ,EAAE,MAAM,CAAC;QAAC,MAAM,EAAE,cAAc,CAAC;QAAC,MAAM,EAAE,cAAc,CAAA;KAAE,CAAC;CACzF;AASD,yFAAyF;AACzF,eAAO,MAAM,gCAAgC;;iBAAU,CAAA;AACvD,MAAM,MAAM,gCAAgC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,gCAAgC,CAAC,CAAA;AAE/F,yFAAyF;AACzF,eAAO,MAAM,gCAAgC;;iBAAU,CAAA;AACvD,MAAM,MAAM,gCAAgC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,gCAAgC,CAAC,CAAA;AAE/F,4FAA4F;AAC5F,eAAO,MAAM,mCAAmC;;iBAAU,CAAA;AAC1D,MAAM,MAAM,mCAAmC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,mCAAmC,CAAC,CAAA;AAErG,6FAA6F;AAC7F,eAAO,MAAM,oCAAoC;;iBAAU,CAAA;AAC3D,MAAM,MAAM,oCAAoC,GAAG,CAAC,CAAC,KAAK,CACxD,OAAO,oCAAoC,CAC5C,CAAA;AAED;;;;;;;;GAQG;AACH,eAAO,MAAM,8BAA8B;;;;iBAAc,CAAA;AACzD,MAAM,MAAM,8BAA8B,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,8BAA8B,CAAC,CAAA;AAE3F,uGAAuG;AACvG,eAAO,MAAM,8BAA8B;;;;iBAAc,CAAA;AACzD,MAAM,MAAM,8BAA8B,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,8BAA8B,CAAC,CAAA;AAE3F,gHAAgH;AAChH,eAAO,MAAM,uCAAuC;;;;iBAAc,CAAA;AAClE,MAAM,MAAM,uCAAuC,GAAG,CAAC,CAAC,KAAK,CAC3D,OAAO,uCAAuC,CAC/C,CAAA;AAED;;;;;;;GAOG;AACH,eAAO,MAAM,mCAAmC;;;iBAG9C,CAAA;AACF,MAAM,MAAM,mCAAmC,GAAG,CAAC,CAAC,KAAK,CACvD,OAAO,mCAAmC,CAC3C,CAAA;AAED;;;;;;;GAOG;AACH,eAAO,MAAM,wCAAwC;;;iBAGnD,CAAA;AACF,MAAM,MAAM,wCAAwC,GAAG,CAAC,CAAC,KAAK,CAC5D,OAAO,wCAAwC,CAChD,CAAA;AAED,mGAAmG;AACnG,eAAO,MAAM,0CAA0C;;iBAAU,CAAA;AACjE,MAAM,MAAM,0CAA0C,GAAG,CAAC,CAAC,KAAK,CAC9D,OAAO,0CAA0C,CAClD,CAAA;AAED,2FAA2F;AAC3F,eAAO,MAAM,kCAAkC;;iBAAU,CAAA;AACzD,MAAM,MAAM,kCAAkC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,kCAAkC,CAAC,CAAA;AAEnG,4FAA4F;AAC5F,eAAO,MAAM,mCAAmC;;iBAAU,CAAA;AAC1D,MAAM,MAAM,mCAAmC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,mCAAmC,CAAC,CAAA;AAErG,4FAA4F;AAC5F,eAAO,MAAM,mCAAmC;;iBAAU,CAAA;AAC1D,MAAM,MAAM,mCAAmC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,mCAAmC,CAAC,CAAA;AAErG,8FAA8F;AAC9F,eAAO,MAAM,qCAAqC;;iBAAU,CAAA;AAC5D,MAAM,MAAM,qCAAqC,GAAG,CAAC,CAAC,KAAK,CACzD,OAAO,qCAAqC,CAC7C,CAAA;AAED,gGAAgG;AAChG,eAAO,MAAM,uCAAuC;;iBAAU,CAAA;AAC9D,MAAM,MAAM,uCAAuC,GAAG,CAAC,CAAC,KAAK,CAC3D,OAAO,uCAAuC,CAC/C,CAAA;AAED,8FAA8F;AAC9F,eAAO,MAAM,qCAAqC;;iBAAU,CAAA;AAC5D,MAAM,MAAM,qCAAqC,GAAG,CAAC,CAAC,KAAK,CACzD,OAAO,qCAAqC,CAC7C,CAAA;AAED;;;;;;;GAOG;AACH,eAAO,MAAM,8BAA8B;;;iBAGzC,CAAA;AACF,MAAM,MAAM,8BAA8B,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,8BAA8B,CAAC,CAAA;AAE3F;;;;;;;GAOG;AACH,eAAO,MAAM,kCAAkC;;;iBAG7C,CAAA;AACF,MAAM,MAAM,kCAAkC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,kCAAkC,CAAC,CAAA"}