@snaptrude/plugin-core 0.0.0-bimsvg-20260928124803

package/dist/api/entity/buildableEnvelope.d.ts

@@ -0,0 +1,265 @@
+import * as z from "zod";
+import { PluginApiReturn } from "../../types";
+/**
+ * Buildable Envelope management — create and update parametric zoning envelopes.
+ *
+ * A **buildable envelope** is the regulated volume inside which a building may
+ * be massed. The host owns envelope identity: {@linkcode PluginBuildableEnvelopeApi.create create}
+ * mints a `buildableEnvelopeId` and returns it; {@linkcode PluginBuildableEnvelopeApi.update update}
+ * requires that id to target the existing envelope.
+ *
+ * Accessed via `snaptrude.entity.buildableEnvelope`.
+ */
+export declare abstract class PluginBuildableEnvelopeApi {
+    constructor();
+    /**
+     * Create a new parametric buildable envelope — the zoning-regulated volume a
+     * building may occupy — generated from a site polygon, tiered setbacks, a
+     * height or floor-count cap, and optional FAR and lot-coverage limits.
+     *
+     * @param sitePolygon - Site polygon vertices in `lengthUnit`; minimum 3 vertices.
+     * @param lengthUnit - Unit used by all length fields (`"ft" | "m"`).
+     * @param setbacks - Setback profile, ground tier first; minimum 1 tier.
+     * @param verticalCap - Maximum height or floor count.
+     * @param floorToFloor - Required floor-to-floor height in `lengthUnit`.
+     * @param farRatio - Optional FAR value, positive when provided.
+     * @param lotCoverageMaxPct - Optional lot coverage cap, `0..100`.
+     * @returns A {@linkcode PluginBuildableEnvelopeCreateResult} with the
+     *   `buildableEnvelopeId` of the created envelope.
+     * @throws If validation fails or generation produces no renderable geometry.
+     *
+     * @examplePrompt Create a buildable envelope for my site
+     * @examplePrompt Generate the zoning envelope with 10ft front setbacks
+     * @examplePrompt Show the maximum buildable volume with a 150ft height limit
+     * @examplePrompt Model the allowable massing from the setback rules
+     * @examplePrompt Create a zoning envelope capped at 12 floors with FAR 3
+     *
+     * # Example
+     * ```ts
+     * const { buildableEnvelopeId } = await snaptrude.entity.buildableEnvelope.create(
+     *   [
+     *     { x: 0, z: 0 },
+     *     { x: 100, z: 0 },
+     *     { x: 100, z: 80 },
+     *     { x: 0, z: 80 },
+     *   ],
+     *   "ft",
+     *   [
+     *     { aboveHeight: 0, front: 10, side: 5, rear: 10 },
+     *     { aboveHeight: 100, front: 20, side: 10, rear: 20 },
+     *   ],
+     *   { kind: "max_height", maxHeight: 150 },
+     *   12,
+     * )
+     * ```
+     *
+     * @deprecated Use `design.create.buildableEnvelope`
+     */
+    abstract create(sitePolygon: PluginBuildableEnvelopePolygonVertex[], lengthUnit: "ft" | "m", setbacks: PluginBuildableEnvelopeSetbackTier[], verticalCap: PluginBuildableEnvelopeVerticalCap, floorToFloor: number, farRatio?: number, lotCoverageMaxPct?: number): PluginApiReturn<PluginBuildableEnvelopeCreateResult>;
+    /**
+     * Update an existing parametric buildable envelope — regenerate the zoning
+     * volume from a revised site polygon, setbacks, vertical cap, or FAR and
+     * lot-coverage limits, keeping the same envelope id.
+     *
+     * @param buildableEnvelopeId - Existing envelope ID to update; non-empty and
+     *   must match an existing envelope on the canvas.
+     * @param sitePolygon - Site polygon vertices in `lengthUnit`; minimum 3 vertices.
+     * @param lengthUnit - Unit used by all length fields (`"ft" | "m"`).
+     * @param setbacks - Setback profile, ground tier first; minimum 1 tier.
+     * @param verticalCap - Maximum height or floor count.
+     * @param floorToFloor - Required floor-to-floor height in `lengthUnit`.
+     * @param farRatio - Optional FAR value, positive when provided.
+     * @param lotCoverageMaxPct - Optional lot coverage cap, `0..100`.
+     * @returns A {@linkcode PluginBuildableEnvelopeUpdateResult} with the
+     *   `buildableEnvelopeId` of the updated envelope.
+     * @throws If validation fails, the envelope does not exist, or generation
+     *   produces no renderable geometry.
+     *
+     * @examplePrompt Change the envelope's height limit to 175 feet
+     * @examplePrompt Update the setbacks on the buildable envelope
+     * @examplePrompt Regenerate the zoning envelope with a new site boundary
+     * @examplePrompt Increase the FAR on the buildable volume
+     * @examplePrompt Modify the envelope to allow 15 storeys instead
+     *
+     * # Example
+     * ```ts
+     * const { buildableEnvelopeId } = await snaptrude.entity.buildableEnvelope.update(
+     *   existingId,
+     *   [
+     *     { x: 0, z: 0 },
+     *     { x: 100, z: 0 },
+     *     { x: 100, z: 80 },
+     *     { x: 0, z: 80 },
+     *   ],
+     *   "ft",
+     *   [{ aboveHeight: 0, front: 10, side: 5, rear: 10 }],
+     *   { kind: "max_height", maxHeight: 175 },
+     *   12,
+     * )
+     * ```
+     *
+     * @deprecated Use `design.update.buildableEnvelope`
+     */
+    abstract update(buildableEnvelopeId: string, sitePolygon: PluginBuildableEnvelopePolygonVertex[], lengthUnit: "ft" | "m", setbacks: PluginBuildableEnvelopeSetbackTier[], verticalCap: PluginBuildableEnvelopeVerticalCap, floorToFloor: number, farRatio?: number, lotCoverageMaxPct?: number): PluginApiReturn<PluginBuildableEnvelopeUpdateResult>;
+}
+/**
+ * Site polygon vertex in the request `lengthUnit`.
+ *
+ * Vertices may be passed as `{x, z}` objects or `[x, z]` tuples. Numeric
+ * values must be finite (no `NaN` or `±Infinity`).
+ */
+export declare const PluginBuildableEnvelopePolygonVertex: z.ZodUnion<readonly [z.ZodObject<{
+    x: z.ZodNumber;
+    z: z.ZodNumber;
+}, z.core.$strict>, z.ZodTuple<[z.ZodNumber, z.ZodNumber], null>]>;
+export type PluginBuildableEnvelopePolygonVertex = z.infer<typeof PluginBuildableEnvelopePolygonVertex>;
+/**
+ * Vertical cap for a buildable envelope.
+ *
+ * Use exactly one shape:
+ * - `{ kind: "max_height", maxHeight }`
+ * - `{ kind: "max_floors", maxFloors }`
+ *
+ * Floor-to-floor height is not nested here; it is always supplied as the
+ * top-level `floorToFloor` argument.
+ */
+export declare const PluginBuildableEnvelopeVerticalCap: z.ZodDiscriminatedUnion<[z.ZodObject<{
+    kind: z.ZodLiteral<"max_height">;
+    maxHeight: z.ZodNumber;
+}, z.core.$strict>, z.ZodObject<{
+    kind: z.ZodLiteral<"max_floors">;
+    maxFloors: z.ZodNumber;
+}, z.core.$strict>], "kind">;
+export type PluginBuildableEnvelopeVerticalCap = z.infer<typeof PluginBuildableEnvelopeVerticalCap>;
+/**
+ * One tier of a buildable envelope's setback profile.
+ *
+ * Tiers are ordered by `aboveHeight`. The first tier (index 0) must have
+ * `aboveHeight: 0` and describes the ground footprint; each subsequent tier
+ * describes the complete setback at a strictly greater height. Each tier
+ * carries its own `front`, `side`, and `rear` values — there is no
+ * inheritance from earlier tiers.
+ *
+ * All numeric values must be finite and nonnegative, in the request
+ * `lengthUnit`.
+ *
+ * | Property | Type | Description |
+ * |---|---|---|
+ * | `aboveHeight` | `number` | Height at or above which this tier applies; the ground tier uses `0` |
+ * | `front` | `number` | Front setback for this tier |
+ * | `side` | `number` | Side setback for this tier |
+ * | `rear` | `number` | Rear setback for this tier |
+ */
+export declare const PluginBuildableEnvelopeSetbackTier: z.ZodObject<{
+    aboveHeight: z.ZodNumber;
+    front: z.ZodNumber;
+    side: z.ZodNumber;
+    rear: z.ZodNumber;
+}, z.core.$strict>;
+export type PluginBuildableEnvelopeSetbackTier = z.infer<typeof PluginBuildableEnvelopeSetbackTier>;
+/**
+ * Arguments for {@linkcode PluginBuildableEnvelopeApi.create}.
+ *
+ * Strict schema. The host owns identity — no `buildableEnvelopeId` is accepted
+ * on create; the id is minted by the host and returned in
+ * {@linkcode PluginBuildableEnvelopeCreateResult}.
+ *
+ * | Property | Type | Description |
+ * |---|---|---|
+ * | `sitePolygon` | {@linkcode PluginBuildableEnvelopePolygonVertex}`[]` | Site polygon vertices in `lengthUnit`; minimum 3 vertices |
+ * | `lengthUnit` | `"ft" \| "m"` | Unit used by all length fields |
+ * | `setbacks` | {@linkcode PluginBuildableEnvelopeSetbackTier}`[]` | Setback profile, ground tier first; minimum 1 tier |
+ * | `verticalCap` | {@linkcode PluginBuildableEnvelopeVerticalCap} | Maximum height or floor count |
+ * | `floorToFloor` | `number` | Required floor-to-floor height in `lengthUnit` |
+ * | `farRatio` | `number?` | Optional FAR value, positive when provided |
+ * | `lotCoverageMaxPct` | `number?` | Optional lot coverage cap, `0..100` |
+ */
+export declare const PluginBuildableEnvelopeCreateArgs: z.ZodObject<{
+    sitePolygon: z.ZodArray<z.ZodUnion<readonly [z.ZodObject<{
+        x: z.ZodNumber;
+        z: z.ZodNumber;
+    }, z.core.$strict>, z.ZodTuple<[z.ZodNumber, z.ZodNumber], null>]>>;
+    lengthUnit: z.ZodUnion<readonly [z.ZodLiteral<"ft">, z.ZodLiteral<"m">]>;
+    setbacks: z.ZodArray<z.ZodObject<{
+        aboveHeight: z.ZodNumber;
+        front: z.ZodNumber;
+        side: z.ZodNumber;
+        rear: z.ZodNumber;
+    }, z.core.$strict>>;
+    verticalCap: z.ZodDiscriminatedUnion<[z.ZodObject<{
+        kind: z.ZodLiteral<"max_height">;
+        maxHeight: z.ZodNumber;
+    }, z.core.$strict>, z.ZodObject<{
+        kind: z.ZodLiteral<"max_floors">;
+        maxFloors: z.ZodNumber;
+    }, z.core.$strict>], "kind">;
+    floorToFloor: z.ZodNumber;
+    farRatio: z.ZodOptional<z.ZodNumber>;
+    lotCoverageMaxPct: z.ZodOptional<z.ZodNumber>;
+}, z.core.$strict>;
+export type PluginBuildableEnvelopeCreateArgs = z.infer<typeof PluginBuildableEnvelopeCreateArgs>;
+/**
+ * Result of {@linkcode PluginBuildableEnvelopeApi.create}.
+ *
+ * | Property | Type | Description |
+ * |---|---|---|
+ * | `buildableEnvelopeId` | `string` | Non-empty unique ID of the created buildable envelope |
+ */
+export declare const PluginBuildableEnvelopeCreateResult: z.ZodObject<{
+    buildableEnvelopeId: z.ZodString;
+}, z.core.$strict>;
+export type PluginBuildableEnvelopeCreateResult = z.infer<typeof PluginBuildableEnvelopeCreateResult>;
+/**
+ * Arguments for {@linkcode PluginBuildableEnvelopeApi.update}.
+ *
+ * Strict schema. `buildableEnvelopeId` is required and identifies the prior
+ * envelope on the canvas to update.
+ *
+ * | Property | Type | Description |
+ * |---|---|---|
+ * | `buildableEnvelopeId` | `string` | Existing envelope ID to update; non-empty |
+ * | `sitePolygon` | {@linkcode PluginBuildableEnvelopePolygonVertex}`[]` | Site polygon vertices in `lengthUnit`; minimum 3 vertices |
+ * | `lengthUnit` | `"ft" \| "m"` | Unit used by all length fields |
+ * | `setbacks` | {@linkcode PluginBuildableEnvelopeSetbackTier}`[]` | Setback profile, ground tier first; minimum 1 tier |
+ * | `verticalCap` | {@linkcode PluginBuildableEnvelopeVerticalCap} | Maximum height or floor count |
+ * | `floorToFloor` | `number` | Required floor-to-floor height in `lengthUnit` |
+ * | `farRatio` | `number?` | Optional FAR value, positive when provided |
+ * | `lotCoverageMaxPct` | `number?` | Optional lot coverage cap, `0..100` |
+ */
+export declare const PluginBuildableEnvelopeUpdateArgs: z.ZodObject<{
+    buildableEnvelopeId: z.ZodString;
+    sitePolygon: z.ZodArray<z.ZodUnion<readonly [z.ZodObject<{
+        x: z.ZodNumber;
+        z: z.ZodNumber;
+    }, z.core.$strict>, z.ZodTuple<[z.ZodNumber, z.ZodNumber], null>]>>;
+    lengthUnit: z.ZodUnion<readonly [z.ZodLiteral<"ft">, z.ZodLiteral<"m">]>;
+    setbacks: z.ZodArray<z.ZodObject<{
+        aboveHeight: z.ZodNumber;
+        front: z.ZodNumber;
+        side: z.ZodNumber;
+        rear: z.ZodNumber;
+    }, z.core.$strict>>;
+    verticalCap: z.ZodDiscriminatedUnion<[z.ZodObject<{
+        kind: z.ZodLiteral<"max_height">;
+        maxHeight: z.ZodNumber;
+    }, z.core.$strict>, z.ZodObject<{
+        kind: z.ZodLiteral<"max_floors">;
+        maxFloors: z.ZodNumber;
+    }, z.core.$strict>], "kind">;
+    floorToFloor: z.ZodNumber;
+    farRatio: z.ZodOptional<z.ZodNumber>;
+    lotCoverageMaxPct: z.ZodOptional<z.ZodNumber>;
+}, z.core.$strict>;
+export type PluginBuildableEnvelopeUpdateArgs = z.infer<typeof PluginBuildableEnvelopeUpdateArgs>;
+/**
+ * Result of {@linkcode PluginBuildableEnvelopeApi.update}.
+ *
+ * | Property | Type | Description |
+ * |---|---|---|
+ * | `buildableEnvelopeId` | `string` | Non-empty unique ID of the updated buildable envelope |
+ */
+export declare const PluginBuildableEnvelopeUpdateResult: z.ZodObject<{
+    buildableEnvelopeId: z.ZodString;
+}, z.core.$strict>;
+export type PluginBuildableEnvelopeUpdateResult = z.infer<typeof PluginBuildableEnvelopeUpdateResult>;
+//# sourceMappingURL=buildableEnvelope.d.ts.map

package/dist/api/entity/buildableEnvelope.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"buildableEnvelope.d.ts","sourceRoot":"","sources":["../../../src/api/entity/buildableEnvelope.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,CAAC,MAAM,KAAK,CAAA;AACxB,OAAO,EAAE,eAAe,EAAE,MAAM,aAAa,CAAA;AAE7C;;;;;;;;;GASG;AACH,8BAAsB,0BAA0B;;IAG9C;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OA0CG;aACa,MAAM,CACpB,WAAW,EAAE,oCAAoC,EAAE,EACnD,UAAU,EAAE,IAAI,GAAG,GAAG,EACtB,QAAQ,EAAE,kCAAkC,EAAE,EAC9C,WAAW,EAAE,kCAAkC,EAC/C,YAAY,EAAE,MAAM,EACpB,QAAQ,CAAC,EAAE,MAAM,EACjB,iBAAiB,CAAC,EAAE,MAAM,GACzB,eAAe,CAAC,mCAAmC,CAAC;IAEvD;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OA2CG;aACa,MAAM,CACpB,mBAAmB,EAAE,MAAM,EAC3B,WAAW,EAAE,oCAAoC,EAAE,EACnD,UAAU,EAAE,IAAI,GAAG,GAAG,EACtB,QAAQ,EAAE,kCAAkC,EAAE,EAC9C,WAAW,EAAE,kCAAkC,EAC/C,YAAY,EAAE,MAAM,EACpB,QAAQ,CAAC,EAAE,MAAM,EACjB,iBAAiB,CAAC,EAAE,MAAM,GACzB,eAAe,CAAC,mCAAmC,CAAC;CACxD;AAED;;;;;GAKG;AACH,eAAO,MAAM,oCAAoC;;;kEAG/C,CAAA;AAEF,MAAM,MAAM,oCAAoC,GAAG,CAAC,CAAC,KAAK,CACxD,OAAO,oCAAoC,CAC5C,CAAA;AAED;;;;;;;;;GASG;AACH,eAAO,MAAM,kCAAkC;;;;;;4BAS7C,CAAA;AAEF,MAAM,MAAM,kCAAkC,GAAG,CAAC,CAAC,KAAK,CACtD,OAAO,kCAAkC,CAC1C,CAAA;AAED;;;;;;;;;;;;;;;;;;GAkBG;AACH,eAAO,MAAM,kCAAkC;;;;;kBAKpC,CAAA;AAEX,MAAM,MAAM,kCAAkC,GAAG,CAAC,CAAC,KAAK,CACtD,OAAO,kCAAkC,CAC1C,CAAA;AA+BD;;;;;;;;;;;;;;;;GAgBG;AACH,eAAO,MAAM,iCAAiC;;;;;;;;;;;;;;;;;;;;;;kBAWZ,CAAA;AAElC,MAAM,MAAM,iCAAiC,GAAG,CAAC,CAAC,KAAK,CACrD,OAAO,iCAAiC,CACzC,CAAA;AAED;;;;;;GAMG;AACH,eAAO,MAAM,mCAAmC;;kBAErC,CAAA;AAEX,MAAM,MAAM,mCAAmC,GAAG,CAAC,CAAC,KAAK,CACvD,OAAO,mCAAmC,CAC3C,CAAA;AAED;;;;;;;;;;;;;;;;GAgBG;AACH,eAAO,MAAM,iCAAiC;;;;;;;;;;;;;;;;;;;;;;;kBAYZ,CAAA;AAElC,MAAM,MAAM,iCAAiC,GAAG,CAAC,CAAC,KAAK,CACrD,OAAO,iCAAiC,CACzC,CAAA;AAED;;;;;;GAMG;AACH,eAAO,MAAM,mCAAmC;;kBAErC,CAAA;AAEX,MAAM,MAAM,mCAAmC,GAAG,CAAC,CAAC,KAAK,CACvD,OAAO,mCAAmC,CAC3C,CAAA"}

package/dist/api/entity/department.d.ts

@@ -0,0 +1 @@
+//# sourceMappingURL=department.d.ts.map

package/dist/api/entity/department.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"department.d.ts","sourceRoot":"","sources":["../../../src/api/entity/department.ts"],"names":[],"mappings":""}

package/dist/api/entity/index.d.ts

@@ -0,0 +1,28 @@
+import { PluginBuildableEnvelopeApi } from "./buildableEnvelope";
+import { PluginReferenceLineApi } from "./referenceLine";
+import { PluginStoryApi } from "./story";
+/**
+ * CRUD operations on Snaptrude building entities.
+ *
+ * - {@linkcode PluginEntityApi.story} — Create, query, and update stories (floors)
+ * - {@linkcode PluginEntityApi.referenceLine} — Create, query, and delete reference lines
+ * - {@linkcode PluginEntityApi.buildableEnvelope} — Create or update parametric buildable envelopes
+ *
+ * Space operations moved to `design.create.spaces` / `design.update.*` /
+ * `design.query.*` / `design.delete.entities` (the `entity.space` API was removed);
+ * `./space` still exports the shared space value types.
+ */
+export declare abstract class PluginEntityApi {
+    /** Story (floor/storey) operations. See {@linkcode PluginStoryApi}. */
+    abstract story: PluginStoryApi;
+    /** Reference line operations. See {@linkcode PluginReferenceLineApi}. */
+    abstract referenceLine: PluginReferenceLineApi;
+    /** Buildable Envelope operations. See {@linkcode PluginBuildableEnvelopeApi}. */
+    abstract buildableEnvelope: PluginBuildableEnvelopeApi;
+    constructor();
+}
+export * from "./buildableEnvelope";
+export * from "./referenceLine";
+export * from "./space";
+export * from "./story";
+//# sourceMappingURL=index.d.ts.map

package/dist/api/entity/index.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../../src/api/entity/index.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,0BAA0B,EAAE,MAAM,qBAAqB,CAAA;AAChE,OAAO,EAAE,sBAAsB,EAAE,MAAM,iBAAiB,CAAA;AACxD,OAAO,EAAE,cAAc,EAAE,MAAM,SAAS,CAAA;AAExC;;;;;;;;;;GAUG;AACH,8BAAsB,eAAe;IACnC,uEAAuE;IACvE,SAAgB,KAAK,EAAE,cAAc,CAAA;IACrC,yEAAyE;IACzE,SAAgB,aAAa,EAAE,sBAAsB,CAAA;IACrD,iFAAiF;IACjF,SAAgB,iBAAiB,EAAE,0BAA0B,CAAA;;CAG9D;AAED,cAAc,qBAAqB,CAAA;AACnC,cAAc,iBAAiB,CAAA;AAC/B,cAAc,SAAS,CAAA;AACvB,cAAc,SAAS,CAAA"}

package/dist/api/entity/referenceLine.d.ts

@@ -0,0 +1,210 @@
+import * as z from "zod";
+import { PluginApiReturn } from "../../types";
+import { ProfileHandle } from "../../handles";
+/**
+ * Reference line management — create, query, and delete reference lines.
+ *
+ * A **reference line** is a 2D guide line (or arc) in the Snaptrude scene,
+ * typically used for grid lines and alignment guides. Reference lines
+ * carry properties such as grid tags, labels, and line styles.
+ *
+ * All methods are **host API calls** that return Promises and support
+ * undo/redo via Snaptrude's command system.
+ *
+ * Accessed via `snaptrude.entity.referenceLine`.
+ */
+export declare abstract class PluginReferenceLineApi {
+    constructor();
+    /**
+     * Create multiple reference lines from a profile.
+     *
+     * Each curve in the given {@linkcode ProfileHandle} becomes
+     * a separate reference line. Uses `ReferenceLineConstructor.createFromProfile`
+     * internally.
+     *
+     * @param profile - A {@linkcode ProfileHandle} whose curves define the
+     *   reference lines to create
+     * @returns A {@linkcode PluginReferenceLineCreateMultiResult} with the
+     *   `referenceLineIds` of the created reference lines
+     * @throws If reference line creation fails
+     *
+     * @examplePrompt Draw grid lines across the site
+     * @examplePrompt Create reference lines from these curves
+     * @examplePrompt Add alignment guides along the building edge
+     * @examplePrompt Set up a structural grid using guide lines
+     * @examplePrompt Turn this profile into reference lines
+     *
+     * # Example
+     * ```ts
+     * const { vec3 } = snaptrude.core.math
+     *
+     * const start = await vec3.new(0, 0, 0)
+     * const mid = await vec3.new(10, 0, 0)
+     * const end = await vec3.new(10, 0, 10)
+     * const l1 = await snaptrude.core.geom.create.line(start, mid)
+     * const l2 = await snaptrude.core.geom.create.line(mid, end)
+     * const profile = await snaptrude.core.geom.create.profileFromCurves([l1, l2])
+     *
+     * const { referenceLineIds } = await snaptrude.entity.referenceLine.createMulti(profile)
+     * ```
+     *
+     * @deprecated Use `design.create.referenceLines`
+     */
+    abstract createMulti(profile: ProfileHandle): PluginApiReturn<PluginReferenceLineCreateMultiResult>;
+    /**
+     * Get properties of a reference line by its ID.
+     *
+     * Only the properties listed in `properties` are returned — unlisted
+     * properties will be `undefined` in the result.
+     *
+     * @param referenceLineId - The unique reference line ID
+     * @param properties - Array of property names to retrieve. See
+     *   {@linkcode PluginReferenceLineGetProperty}.
+     * @returns A partial {@linkcode PluginReferenceLineGetResult} containing only the
+     *   requested properties
+     * @throws If the reference line does not exist
+     *
+     * @examplePrompt Get the curve geometry of this reference line
+     * @examplePrompt Where does this grid line run?
+     * @examplePrompt Read the geometry of a guide line by its id
+     * @examplePrompt Look up the curve of the selected reference line
+     *
+     * # Example
+     * ```ts
+     * const result = await snaptrude.entity.referenceLine.get("some-ref-line-id", ["curve"])
+     * // result.curve is an opaque CurveHandle; a dedicated curve read API for its
+     * // coordinates is exposed separately via `snaptrude.core.geom.curve`.
+     * ```
+     *
+     * @deprecated Use `design.query.referenceLines.get`
+     */
+    abstract get(referenceLineId: string, properties: z.infer<typeof PluginReferenceLineGetProperty>[]): PluginApiReturn<PluginReferenceLineGetResult>;
+    /**
+     * Get the IDs of all reference lines in the current project.
+     *
+     * Returns every reference line across all stories.
+     * Use the returned IDs with {@linkcode PluginReferenceLineApi.get} to query
+     * individual reference line properties.
+     *
+     * @returns A {@linkcode PluginReferenceLineGetAllResult} with a
+     *   `referenceLineIds` array
+     *
+     * @examplePrompt How many grid lines are in the project?
+     * @examplePrompt List all the reference lines in my model
+     * @examplePrompt Show every guide line in the file
+     * @examplePrompt Do I have any reference lines in this project?
+     *
+     * # Example
+     * ```ts
+     * const { referenceLineIds } = await snaptrude.entity.referenceLine.getAll()
+     * console.log(`Project has ${referenceLineIds.length} reference lines`)
+     * ```
+     *
+     * @deprecated Use `design.query.listReferenceLines`
+     */
+    abstract getAll(): PluginApiReturn<PluginReferenceLineGetAllResult>;
+    /**
+     * Delete a reference line by its ID.
+     *
+     * Permanently removes the reference line and its associated mesh from
+     * the scene. This operation is undoable via Snaptrude's command system.
+     *
+     * @param referenceLineId - The unique reference line ID to delete
+     * @throws If the reference line does not exist
+     *
+     * @examplePrompt Delete this reference line
+     * @examplePrompt Remove the grid line I just drew
+     * @examplePrompt Get rid of the alignment guide on the left
+     * @examplePrompt Erase a reference line by its id
+     *
+     * # Example
+     * ```ts
+     * await snaptrude.entity.referenceLine.delete("some-ref-line-id")
+     * ```
+     *
+     * @deprecated Use `design.delete.entities`
+     */
+    abstract delete(referenceLineId: string): PluginApiReturn<PluginReferenceLineDeleteResult>;
+}
+/**
+ * Arguments for {@linkcode PluginReferenceLineApi.createMulti}.
+ *
+ * | Property | Type | Description |
+ * |---|---|---|
+ * | `profile` | {@linkcode ProfileHandle} | Profile handle whose curves define reference lines |
+ */
+export declare const PluginReferenceLineCreateMultiArgs: z.ZodObject<{
+    profile: z.ZodPipe<z.ZodPipe<z.ZodTransform<unknown, unknown>, z.ZodString>, z.ZodTransform<import("../..").Handle<"profile">, string>>;
+}, z.core.$strip>;
+export type PluginReferenceLineCreateMultiArgs = z.infer<typeof PluginReferenceLineCreateMultiArgs>;
+/**
+ * Result of {@linkcode PluginReferenceLineApi.createMulti}.
+ *
+ * | Property | Type | Description |
+ * |---|---|---|
+ * | `referenceLineIds` | `string[]` | IDs of the created reference lines |
+ */
+export declare const PluginReferenceLineCreateMultiResult: z.ZodObject<{
+    referenceLineIds: z.ZodArray<z.ZodString>;
+}, z.core.$strip>;
+export type PluginReferenceLineCreateMultiResult = z.infer<typeof PluginReferenceLineCreateMultiResult>;
+/**
+ * Available properties that can be queried on a reference line.
+ *
+ * | Value | Return Type | Description |
+ * |---|---|---|
+ * | `"curve"` | {@linkcode CurveHandle} | The curve geometry of the reference line, as an opaque handle |
+ */
+export declare const PluginReferenceLineGetProperty: z.ZodEnum<{
+    curve: "curve";
+}>;
+/**
+ * Arguments for {@linkcode PluginReferenceLineApi.get}.
+ *
+ * | Property | Type | Description |
+ * |---|---|---|
+ * | `referenceLineId` | `string` | The reference line ID to query |
+ * | `properties` | {@linkcode PluginReferenceLineGetProperty}`[]` | Properties to retrieve |
+ */
+export declare const PluginReferenceLineGetArgs: z.ZodObject<{
+    referenceLineId: z.ZodString;
+    properties: z.ZodArray<z.ZodEnum<{
+        curve: "curve";
+    }>>;
+}, z.core.$strip>;
+export type PluginReferenceLineGetArgs = z.infer<typeof PluginReferenceLineGetArgs>;
+/**
+ * Result of {@linkcode PluginReferenceLineApi.get}.
+ *
+ * A partial object — only the properties that were requested in
+ * {@linkcode PluginReferenceLineGetArgs.properties} will be present.
+ */
+export declare const PluginReferenceLineGetResult: z.ZodObject<{
+    curve: z.ZodOptional<z.ZodUnion<readonly [z.ZodPipe<z.ZodPipe<z.ZodTransform<unknown, unknown>, z.ZodString>, z.ZodTransform<import("../..").Handle<"line">, string>>, z.ZodPipe<z.ZodPipe<z.ZodTransform<unknown, unknown>, z.ZodString>, z.ZodTransform<import("../..").Handle<"arc">, string>>]>>;
+}, z.core.$strip>;
+export type PluginReferenceLineGetResult = z.infer<typeof PluginReferenceLineGetResult>;
+/**
+ * Result of {@linkcode PluginReferenceLineApi.getAll}.
+ *
+ * | Property | Type | Description |
+ * |---|---|---|
+ * | `referenceLineIds` | `string[]` | IDs of all reference lines in the project |
+ */
+export declare const PluginReferenceLineGetAllResult: z.ZodObject<{
+    referenceLineIds: z.ZodArray<z.ZodString>;
+}, z.core.$strip>;
+export type PluginReferenceLineGetAllResult = z.infer<typeof PluginReferenceLineGetAllResult>;
+/**
+ * Arguments for {@linkcode PluginReferenceLineApi.delete}.
+ *
+ * | Property | Type | Description |
+ * |---|---|---|
+ * | `referenceLineId` | `string` | The reference line ID to delete |
+ */
+export declare const PluginReferenceLineDeleteArgs: z.ZodObject<{
+    referenceLineId: z.ZodString;
+}, z.core.$strip>;
+export type PluginReferenceLineDeleteArgs = z.infer<typeof PluginReferenceLineDeleteArgs>;
+/** Result type for {@linkcode PluginReferenceLineApi.delete} — returns nothing on success. */
+export type PluginReferenceLineDeleteResult = void;
+//# sourceMappingURL=referenceLine.d.ts.map

package/dist/api/entity/referenceLine.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"referenceLine.d.ts","sourceRoot":"","sources":["../../../src/api/entity/referenceLine.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,CAAC,MAAM,KAAK,CAAA;AACxB,OAAO,EAAE,eAAe,EAAE,MAAM,aAAa,CAAA;AAC7C,OAAO,EAAE,aAAa,EAAe,MAAM,eAAe,CAAA;AAE1D;;;;;;;;;;;GAWG;AACH,8BAAsB,sBAAsB;;IAG1C;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;OAkCG;aACa,WAAW,CACzB,OAAO,EAAE,aAAa,GACrB,eAAe,CAAC,oCAAoC,CAAC;IAExD;;;;;;;;;;;;;;;;;;;;;;;;;;OA0BG;aACa,GAAG,CACjB,eAAe,EAAE,MAAM,EACvB,UAAU,EAAE,CAAC,CAAC,KAAK,CAAC,OAAO,8BAA8B,CAAC,EAAE,GAC3D,eAAe,CAAC,4BAA4B,CAAC;IAEhD;;;;;;;;;;;;;;;;;;;;;;OAsBG;aACa,MAAM,IAAI,eAAe,CAAC,+BAA+B,CAAC;IAE1E;;;;;;;;;;;;;;;;;;;;OAoBG;aACa,MAAM,CACpB,eAAe,EAAE,MAAM,GACtB,eAAe,CAAC,+BAA+B,CAAC;CACpD;AAED;;;;;;GAMG;AACH,eAAO,MAAM,kCAAkC;;iBAE7C,CAAA;AAEF,MAAM,MAAM,kCAAkC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,kCAAkC,CAAC,CAAA;AAEnG;;;;;;GAMG;AACH,eAAO,MAAM,oCAAoC;;iBAE/C,CAAA;AAEF,MAAM,MAAM,oCAAoC,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,oCAAoC,CAAC,CAAA;AAEvG;;;;;;GAMG;AACH,eAAO,MAAM,8BAA8B;;EAEzC,CAAA;AAEF;;;;;;;GAOG;AACH,eAAO,MAAM,0BAA0B;;;;;iBAGrC,CAAA;AAEF,MAAM,MAAM,0BAA0B,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,0BAA0B,CAAC,CAAA;AAEnF;;;;;GAKG;AACH,eAAO,MAAM,4BAA4B;;iBAI7B,CAAA;AAEZ,MAAM,MAAM,4BAA4B,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,4BAA4B,CAAC,CAAA;AAEvF;;;;;;GAMG;AACH,eAAO,MAAM,+BAA+B;;iBAE1C,CAAA;AAEF,MAAM,MAAM,+BAA+B,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,+BAA+B,CAAC,CAAA;AAE7F;;;;;;GAMG;AACH,eAAO,MAAM,6BAA6B;;iBAExC,CAAA;AAEF,MAAM,MAAM,6BAA6B,GAAG,CAAC,CAAC,KAAK,CAAC,OAAO,6BAA6B,CAAC,CAAA;AAEzF,8FAA8F;AAC9F,MAAM,MAAM,+BAA+B,GAAG,IAAI,CAAA"}