@smartledger/bsv 7.3.0 → 7.5.0

package/CHANGELOG.md

@@ -7,6 +7,106 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## [Unreleased]
 
+## [7.5.0] - 2026-08-05
+
+### Fixed
+
+- **`useGenesisLimits()` now lifts the total script size cap, which it previously
+  could not.** The cap was a literal inside `Interpreter.prototype.evaluate`,
+  carrying its own `// TODO: script size should be configurable. no magic numbers`:
+
+  ```js
+  if (this.script.toBuffer().length > 10000) {
+  ```
+
+  So a caller who opted into post-Genesis limits still hit a **pre-Genesis 10,000
+  byte ceiling** — the function said "post-Genesis limits" and enforced one of the
+  limits Genesis removed. Any script above 10 KB failed `SCRIPT_ERR_SCRIPT_SIZE`
+  no matter what was asked for, which put a sizeable 1Sat Ordinals inscription out
+  of reach of the interpreter entirely: transferring one could not be verified by
+  this library at all, in any version, and callers were pushed into checking the
+  ECDSA signature against the sighash by hand.
+
+  The cap is now `Interpreter.MAX_SCRIPT_SIZE`, still defaulting to the
+  pre-Genesis 10,000, and `useGenesisLimits()` raises it along with the other
+  three. Two limits bite at different sizes and the regression test pins both: a
+  3 KB inscription loads and fails on the 520-byte push cap
+  (`SCRIPT_ERR_PUSH_SIZE`), while a 50 KB one is refused before evaluation begins
+  (`SCRIPT_ERR_SCRIPT_SIZE`).
+
+### Added
+
+- **`Interpreter.getLimits()` / `Interpreter.setLimits()`** — capture and restore
+  the four caps as a unit. The caps are process-wide statics, so anything that
+  raises them must put them back or it silently changes the rules for unrelated
+  code later in the same process. Five test files were each restoring three caps
+  by hand, which would have quietly leaked the new fourth one into the bitcoind
+  consensus fixtures; they now use the pair.
+
+- Regression coverage for the case that prompted this: signing a large inscription
+  transfer over the **full previous locking script** (envelope included, which is
+  the script code the network uses), verifying it through the interpreter under
+  Genesis limits, and confirming the interpreter agrees with a direct
+  signature-against-sighash check. A companion test asserts the trap: a signature
+  made over the **base lock alone** verifies against its own preimage and fails the
+  real one, so that mistake cannot pass unnoticed.
+
+### Note on defaults
+
+Post-Genesis limits remain **opt-in**. Making them the default was measured, not
+assumed: it fails **19 bitcoind consensus fixtures** that assert oversized pushes,
+excess opcodes and oversized numerics must be rejected. Those fixtures encode
+pre-Genesis consensus and share the same process-wide statics, so the default
+cannot move while the caps are global. Making the limits per-`Interpreter` policy
+is the real fix and is deliberately not attempted here — it changes a
+consensus-critical evaluation path and deserves its own change.
+
+Suite 4536 → 4544.
+
+## [7.4.0] - 2026-08-05
+
+Completes BSV-21 coverage. 7.3.0 taught the parser every operation the specification
+defines; this release lets you *build* them too, so the authority-based token model is
+usable end to end rather than only readable.
+
+### Added
+
+- **`BSV20.buildAuth` / `buildDeployAuth` / `buildBurn`**, with matching
+  `createAuthOutput` / `createDeployAuthOutput` / `createBurnOutput` 1-sat output helpers.
+  These complete the BSV-21 authority model, which is the current standard (v1 tickers
+  are deprecated):
+
+  - `deploy+auth` declares a token with **no supply** — `amt` is forbidden, and minting
+    happens later against the deploy's outpoint.
+  - `auth` marks an output as carrying the right to mint, which "can be split, combined,
+    or transferred to delegate minting authority". It carries no amount.
+  - `burn` retires an amount of a BSV-21 token. Id-based only: the specification defines
+    no ticker form, and a `tick` is rejected with a message saying so rather than being
+    quietly reinterpreted.
+
+- **`buildMint` accepts `id`**, so a BSV-21 token can be minted against its outpoint
+  (`{p, op:'mint', id, amt}`, which requires an auth input to be spent on chain). Only
+  the v1 ticker form was previously expressible, which meant a token deployed under the
+  authority model could be read but never minted. The v1 ticker path is byte-for-byte
+  unchanged — a regression test pins the exact emitted JSON.
+
+### Fixed
+
+- **`buildTransfer` no longer silently drops `tick` when `id` is also given.** It
+  preferred `id` and discarded the ticker, but those name *different tokens*, so the
+  caller got a transfer of something other than what they asked for. Both `buildMint` and
+  `buildTransfer` now require exactly one of the two and say which is missing when neither
+  is supplied. Same silent-argument family as 7.0.1, 7.0.2, 7.2.0 and 7.3.0.
+
+### Changed
+
+- `bsv.d.ts`: `buildMint` takes `{amt, tick?, id?}`; the new builders and output helpers
+  are declared; `Payload.op` lists `deploy+auth`, `auth` and `burn`. Verified under
+  `tsc --strict` — valid calls compile, and omitting the required `id` on `buildAuth` is
+  a compile error.
+
+Suite 4525 → 4536.
+
 ## [7.3.0] - 2026-08-05
 
 Conformance pass over the rest of `lib/ordinals/`, checked against the published

package/README.md

@@ -186,42 +186,42 @@ console.log('Status:', status) // 'revoked'
 ### **Core Modules**
 | Module | Size | Use Case | CDN |
 |--------|------|----------|-----|
-| **bsv.min.js** | 1149KB | Core BSV + SmartContract | `unpkg.com/@smartledger/bsv@7.3.0/bsv.min.js` |
-| **bsv.bundle.js** | 1149KB | Everything in one file | `unpkg.com/@smartledger/bsv@7.3.0/bsv.bundle.js` |
+| **bsv.min.js** | 1149KB | Core BSV + SmartContract | `unpkg.com/@smartledger/bsv@7.5.0/bsv.min.js` |
+| **bsv.bundle.js** | 1149KB | Everything in one file | `unpkg.com/@smartledger/bsv@7.5.0/bsv.bundle.js` |
 
 ### **W3C Verifiable Credentials**
 | Module | Size | Use Case | CDN |
 |--------|------|----------|-----|
-| **🟢 bsv-didweb.min.js** | 315KB | **DID:web generation** | `unpkg.com/@smartledger/bsv@7.3.0/bsv-didweb.min.js` |
-| **🟢 bsv-vcjwt.min.js** | 315KB | **VC-JWT issue/verify** | `unpkg.com/@smartledger/bsv@7.3.0/bsv-vcjwt.min.js` |
-| **🟢 bsv-statuslist.min.js** | 415KB | **StatusList2021 revocation** | `unpkg.com/@smartledger/bsv@7.3.0/bsv-statuslist.min.js` |
-| **🟢 bsv-anchor.min.js** | 314KB | **BSV anchoring (hash-only)** | `unpkg.com/@smartledger/bsv@7.3.0/bsv-anchor.min.js` |
+| **🟢 bsv-didweb.min.js** | 315KB | **DID:web generation** | `unpkg.com/@smartledger/bsv@7.5.0/bsv-didweb.min.js` |
+| **🟢 bsv-vcjwt.min.js** | 315KB | **VC-JWT issue/verify** | `unpkg.com/@smartledger/bsv@7.5.0/bsv-vcjwt.min.js` |
+| **🟢 bsv-statuslist.min.js** | 415KB | **StatusList2021 revocation** | `unpkg.com/@smartledger/bsv@7.5.0/bsv-statuslist.min.js` |
+| **🟢 bsv-anchor.min.js** | 314KB | **BSV anchoring (hash-only)** | `unpkg.com/@smartledger/bsv@7.5.0/bsv-anchor.min.js` |
 
 ### **Smart Contract & Development**
 | Module | Size | Use Case | CDN |
 |--------|------|----------|-----|
-| **bsv-smartcontract.min.js** | 873KB | Complete covenant framework | `unpkg.com/@smartledger/bsv@7.3.0/bsv-smartcontract.min.js` |
-| **bsv-covenant.min.js** | 873KB | Covenant operations | `unpkg.com/@smartledger/bsv@7.3.0/bsv-covenant.min.js` |
-| **bsv-script-helper.min.js** | 30KB | Custom script tools | `unpkg.com/@smartledger/bsv@7.3.0/bsv-script-helper.min.js` |
-| **bsv-security.min.js** | 30KB | Security enhancements | `unpkg.com/@smartledger/bsv@7.3.0/bsv-security.min.js` |
+| **bsv-smartcontract.min.js** | 873KB | Complete covenant framework | `unpkg.com/@smartledger/bsv@7.5.0/bsv-smartcontract.min.js` |
+| **bsv-covenant.min.js** | 873KB | Covenant operations | `unpkg.com/@smartledger/bsv@7.5.0/bsv-covenant.min.js` |
+| **bsv-script-helper.min.js** | 30KB | Custom script tools | `unpkg.com/@smartledger/bsv@7.5.0/bsv-script-helper.min.js` |
+| **bsv-security.min.js** | 30KB | Security enhancements | `unpkg.com/@smartledger/bsv@7.5.0/bsv-security.min.js` |
 
 ### **Legal & Compliance**
 | Module | Size | Use Case | CDN |
 |--------|------|----------|-----|
-| **bsv-ltp.min.js** | 1149KB | Legal Token Protocol | `unpkg.com/@smartledger/bsv@7.3.0/bsv-ltp.min.js` |
-| **bsv-gdaf.min.js** | 1149KB | Digital Identity & Attestation | `unpkg.com/@smartledger/bsv@7.3.0/bsv-gdaf.min.js` |
+| **bsv-ltp.min.js** | 1149KB | Legal Token Protocol | `unpkg.com/@smartledger/bsv@7.5.0/bsv-ltp.min.js` |
+| **bsv-gdaf.min.js** | 1149KB | Digital Identity & Attestation | `unpkg.com/@smartledger/bsv@7.5.0/bsv-gdaf.min.js` |
 
 ### **Advanced Cryptography**
 | Module | Size | Use Case | CDN |
 |--------|------|----------|-----|
-| **bsv-shamir.min.js** | 353KB | Threshold Cryptography | `unpkg.com/@smartledger/bsv@7.3.0/bsv-shamir.min.js` |
+| **bsv-shamir.min.js** | 353KB | Threshold Cryptography | `unpkg.com/@smartledger/bsv@7.5.0/bsv-shamir.min.js` |
 
 ### **Utilities**
 | Module | Size | Use Case | CDN |
 |--------|------|----------|-----|
-| **bsv-ecies.min.js** | 79KB | Encryption | `unpkg.com/@smartledger/bsv@7.3.0/bsv-ecies.min.js` |
-| **bsv-message.min.js** | 30KB | Message signing | `unpkg.com/@smartledger/bsv@7.3.0/bsv-message.min.js` |
-| **bsv-mnemonic.min.js** | 592KB | HD wallets | `unpkg.com/@smartledger/bsv@7.3.0/bsv-mnemonic.min.js` |
+| **bsv-ecies.min.js** | 79KB | Encryption | `unpkg.com/@smartledger/bsv@7.5.0/bsv-ecies.min.js` |
+| **bsv-message.min.js** | 30KB | Message signing | `unpkg.com/@smartledger/bsv@7.5.0/bsv-message.min.js` |
+| **bsv-mnemonic.min.js** | 592KB | HD wallets | `unpkg.com/@smartledger/bsv@7.5.0/bsv-mnemonic.min.js` |
 
 ## ⚡ **2-Minute Quick Start**
 
@@ -232,7 +232,7 @@ Get started with Bitcoin SV development in under 2 minutes:
 npm install @smartledger/bsv
 
 # Or include in HTML
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv.min.js"></script>
 ```
 
 > **🔒 v5.0.0 (production hardening — has breaking changes):** Shamir secret
@@ -332,8 +332,8 @@ const covenant = bsv.SmartContract.createCovenantBuilder()
 
 ### 🔧 **Basic Development** (~1.2MB total)
 ```html
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv.min.js"></script>
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv-script-helper.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv-script-helper.min.js"></script>
 <script>
   const privateKey = new bsv.PrivateKey();
   const utxos = new bsv.SmartContract.UTXOGenerator().createRealUTXOs(2, 100000);
@@ -342,9 +342,9 @@ const covenant = bsv.SmartContract.createCovenantBuilder()
 
 ### 🔒 **Smart Contract Development** (~2.8MB total — each bundle re-embeds core BSV)
 ```html
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv.min.js"></script>
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv-covenant.min.js"></script>
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv-smartcontract.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv-covenant.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv-smartcontract.min.js"></script>
 <script>
   const covenant = bsv.SmartContract.createCovenantBuilder()
     .extractField('amount').push(50000).greaterThanOrEqual().verify().build();
@@ -354,9 +354,9 @@ const covenant = bsv.SmartContract.createCovenantBuilder()
 
 ### 🆕 **Legal & Identity Development** (~3.4MB total — each bundle re-embeds core BSV)
 ```html
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv.min.js"></script>
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv-ltp.min.js"></script>
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv-gdaf.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv-ltp.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv-gdaf.min.js"></script>
 <script>
   // Legal Token Protocol
   const propertyToken = bsv.createPropertyToken({
@@ -370,9 +370,9 @@ const covenant = bsv.SmartContract.createCovenantBuilder()
 
 ### 🆕 **Security & Cryptography** (~1.5MB total)
 ```html
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv.min.js"></script>
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv-security.min.js"></script>
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv-shamir.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv-security.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv-shamir.min.js"></script>
 <script>
   // Threshold Cryptography
   const shares = bsv.splitSecret('my_secret_key', 5, 3); // 5 shares, 3 needed
@@ -384,7 +384,7 @@ const covenant = bsv.SmartContract.createCovenantBuilder()
 
 ### 🎯 **Everything Bundle** (~1.1MB)
 ```html
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv.bundle.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv.bundle.js"></script>
 <script>
   // Everything available immediately
   const shares = bsv.splitSecret('secret', 5, 3);           // Shamir Secret Sharing
@@ -494,8 +494,8 @@ const contractTx = covenant.createCovenantTransaction({
 
 #### 1. **Minimal Setup** - Core + Script Helper (~1.2MB)
 ```html
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv.min.js"></script>
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv-script-helper.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv-script-helper.min.js"></script>
 <script>
   const tx = new bsv.Transaction();
   const sig = bsvScriptHelper.createSignature(tx, privateKey, 0, script, satoshis);
@@ -504,9 +504,9 @@ const contractTx = covenant.createCovenantTransaction({
 
 #### 2. **DeFi Development** - Core + Covenants + Debug (~2.8MB — each bundle re-embeds core BSV)
 ```html
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv.min.js"></script>
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv-covenant.min.js"></script>
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv-smartcontract.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv-covenant.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv-smartcontract.min.js"></script>
 <script>
   const covenant = new bsvCovenant.CovenantInterface();
   const debugInfo = SmartContract.interpretScript(script);
@@ -516,8 +516,8 @@ const contractTx = covenant.createCovenantTransaction({
 
 #### 3. **Security First** - Core + Enhanced Security (~1.2MB)
 ```html
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv.min.js"></script>
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv-security.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv.min.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv-security.min.js"></script>
 <script>
   const verified = bsvSecurity.SmartVerify.verify(signature, hash, publicKey);
   const enhanced = bsvSecurity.EllipticFixed.createSignature(privateKey, hash);
@@ -526,7 +526,7 @@ const contractTx = covenant.createCovenantTransaction({
 
 #### 4. **Everything Bundle** - One File Solution (~1.1MB)
 ```html
-<script src="https://unpkg.com/@smartledger/bsv@7.3.0/bsv.bundle.js"></script>
+<script src="https://unpkg.com/@smartledger/bsv@7.5.0/bsv.bundle.js"></script>
 <script>
   // Everything available under bsv namespace
   const keys = bsv.SmartLedgerBundle.generateKeys();
@@ -834,7 +834,7 @@ const timelockScript = helper.createTimelockScript(
 
 See the **[16 Loading Options](#-16-loading-options---choose-your-approach)**
 table near the top for the full list of bundles with current sizes and
-canonical `unpkg.com/@smartledger/bsv@7.3.0/...` URLs.
+canonical `unpkg.com/@smartledger/bsv@7.5.0/...` URLs.
 
 ## 🔐 Security