@smartbit4all/playwright-qa 0.2.4 → 0.2.5

package/README.md

@@ -1,625 +1,625 @@
-# @smartbit4all/playwright-qa
-
-Playwright-based testing and documentation framework. Provides screenshot utilities, typed datapools with locale support, and TestStep/TestSuite conventions.
-
-## Installation
-
-```bash
-npm install @smartbit4all/playwright-qa
-```
-
-Requires Node.js 20+ and Playwright as a peer dependency:
-
-```bash
-npm install @playwright/test
-npx playwright install --with-deps chromium
-```
-
-## Quick Start
-
-```typescript
-import { test } from '@playwright/test';
-import { initSuite, screenshot } from '@smartbit4all/playwright-qa';
-
-test.beforeAll(() => {
-  initSuite({ screenshotDir: './screenshots' });
-});
-
-test('take a screenshot', async ({ page }) => {
-  await page.goto('https://demo.playwright.dev/todomvc');
-  await screenshot(page, 'todomvc-home');
-});
-```
-
-## Suite Setup
-
-Every TestSuite should call `initSuite()` in `beforeAll`. This single call resets all internal state (config, datapools, screenshot directory, seed handlers) and optionally sets up the screenshot directory.
-
-```typescript
-import { initSuite } from '@smartbit4all/playwright-qa';
-
-// With screenshots — each run creates a new timestamped subdirectory
-initSuite({ screenshotDir: './screenshots' });
-
-// Clean previous run — deletes the last run's folder before creating a new one
-initSuite({ screenshotDir: './screenshots', cleanScreenshots: true });
-
-// Without screenshots — tests run normally, screenshot calls return null
-initSuite();
-```
-
-By default, each run creates a new timestamped subdirectory and the `latest` symlink always points to the most recent run. Set `cleanScreenshots: true` to delete all previous runs before starting — useful when disk space is limited or only the latest run matters.
-
-When no `screenshotDir` is provided, all screenshot functions (`screenshot`, `screenshotHighlight`, `screenshotRegion`, `screenshotRegionHighlight`) become no-ops and return `null` instead of a file path. This means TestSteps that include screenshot calls work without modification — no conditional logic needed.
-
-When multiple suites run in the same test execution with the same `screenshotDir`, the directory is created once and reused — all screenshots land in a single timestamped folder. This works even if a suite fails mid-run: the next suite picks up the same directory and continues the `autoPrefix` counter from where it left off (e.g., if the failed suite ended at `0005-`, the next suite starts at `0006-`). The framework tracks this via a `.current-run` marker file in the screenshot base directory.
-
-## Viewport
-
-Use `getViewport()` in your `playwright.config.ts` to automatically switch between full-size and headed viewport:
-
-```typescript
-import { defineConfig } from '@playwright/test';
-import { getViewport } from '@smartbit4all/playwright-qa';
-
-export default defineConfig({
-  use: {
-    viewport: getViewport(),
-  },
-});
-```
-
-When running with `--headed`, the viewport automatically shrinks to fit on screen (default: 1280x720). In headless/CI mode, the full viewport is used (default: 1920x1080). Both sizes are configurable in `playwright-qa.config.json`:
-
-```json
-{
-  "viewport": { "width": 1920, "height": 1080 },
-  "headedViewport": { "width": 1280, "height": 720 }
-}
-```
-
-## API Reference
-
-### Screenshot
-
-```typescript
-import { screenshot, screenshotHighlight, screenshotRegion, screenshotRegionHighlight } from '@smartbit4all/playwright-qa';
-
-// Full page screenshot — returns file path, or null if screenshots are disabled
-await screenshot(page, 'page-name');
-await screenshot(page, 'category/page-name');         // name path = subdirectory
-await screenshot(page, 'page-name', { fullPage: true });
-
-// Full page with highlighted element — accepts CSS selector or Locator
-await screenshotHighlight(page, 'name', '#selector');
-await screenshotHighlight(page, 'name', '#selector', { style: 'subtle' });
-await screenshotHighlight(page, 'name', findMenuItem(page, 'Új mappa'));  // Locator
-
-// Region screenshot (single element) — accepts CSS selector or Locator
-await screenshotRegion(page, 'name', '#region-selector');
-
-// Region with highlighted element inside — both accept CSS selector or Locator
-await screenshotRegionHighlight(page, 'name', '#region', '#highlight');
-await screenshotRegionHighlight(page, 'name', findPopupMenu(page), findMenuItem(page, 'Új mappa'));
-```
-
-All screenshot functions return `Promise<string | null>`. They return `null` when no screenshot directory has been configured (see [Suite Setup](#suite-setup)). Highlight and region parameters accept both CSS selectors (string) and Playwright Locators.
-
-### Datapool
-
-```typescript
-import { datapool, configureDatapool } from '@smartbit4all/playwright-qa';
-
-// Global configuration (typically in beforeAll)
-configureDatapool({ locale: 'hu', basePath: './datapools' });
-
-// Load a datapool
-const companies = datapool<Company>('companies');
-
-// Access items
-const item = companies.byKey('it4all');      // by key (meta.key field, default: "code")
-const derived = companies.derive('it4all', { name: 'Modified' }); // template + overrides
-const first = companies.findFirst('city', 'Budapest');            // first match by field
-const matches = companies.findAll('role', 'admin');               // all matches by field
-const random = companies.random();           // random item
-const all = companies.all();                 // all items
-const count = companies.count();             // count
-```
-
-## Built-in Steps
-
-The package ships reusable TestSteps for common smartbit4all UI patterns (grid, tree navigation). These are available via a separate subpath import to keep them distinct from the core API:
-
-```typescript
-import { selectGridRow, navigateInTree } from '@smartbit4all/playwright-qa/steps';
-```
-
-### Forms
-
-```typescript
-import {
-  fillField, fillDate, fillDateTime,
-  selectOption, selectMultiple, selectRadio,
-  setCheckbox, setCheckboxGroup, setToggle,
-  addChip, removeChip, setChips,
-  uploadFile,
-  toggleAccordion,
-} from '@smartbit4all/playwright-qa/steps';
-
-// Fill a text input or textarea — by data-testid (preferred) or label text (fallback)
-await fillField(dialog, 'data.name', 'Teszt mappa');               // data-testid
-await fillField(page, 'dossierContentData.name', 'Teszt dosszié'); // data-testid
-await fillField(page, 'Megjegyzés', 'Ez egy megjegyzés');           // label fallback
-
-// Date picker (ISO format YYYY-MM-DD)
-await fillDate(dialog, 'dataSheet.startDate', '2026-04-15');
-
-// Date-time picker (date + time)
-await fillDateTime(dialog, 'data.deadline', '2026-04-15', '14:30');
-
-// Select from a dropdown (mat-select / p-dropdown) — by data-testid or label
-await selectOption(page, 'selectedDocumentTypeCategory', 'Ügyintézés');  // data-testid
-await selectOption(dialog, 'Kategória', 'Ügyintézés');                   // label fallback
-
-// Multi-select dropdown
-await selectMultiple(dialog, 'data.skills', ['Angular', 'React', 'Vue']);
-
-// Select a radio button — by data-testid on the radio group or label
-await selectRadio(dialog, 'data.canIncludeFiles', 'Nem');       // data-testid
-await selectRadio(dialog, 'Tartalmazhat almappákat', 'Igen');   // label fallback
-
-// Set a checkbox — by data-testid or label
-await setCheckbox(dialog, 'Aktív', true);
-
-// Checkbox group (CHECK_BOX_2) — set multiple checkboxes at once
-await setCheckboxGroup(dialog, 'permissions', { 'Olvasás': true, 'Írás': true, 'Törlés': false });
-
-// Toggle switch
-await setToggle(dialog, 'data.isActive', true);
-
-// Chips — add, remove, or set declaratively
-await addChip(dialog, 'data.tags', 'urgent');
-await removeChip(dialog, 'data.tags', 'draft');
-await setChips(dialog, 'data.tags', ['urgent', 'review']);
-
-// File upload
-await uploadFile(dialog, 'data.attachment', '/path/to/file.pdf');
-
-// Open/close an accordion tab/panel (p-accordion / mat-accordion) — by data-testid or header text.
-// Returns a Locator scoped to the tab's content region, for acting on elements inside it.
-await toggleAccordion(dialog, 'Alapadatok', false);  // close, ignore the returned content
-const content = await toggleAccordion(dialog, 'Alapadatok', true);   // open
-await fillField(content, 'data.note', 'Ez egy megjegyzés');
-```
-
-All form utilities accept a `data-testid` value or a visible label text as identifier. When a `data-testid` match is found on the element, it takes priority; otherwise the function falls back to label text matching (`.smart-form-widget-label`, `h3`, `h4`, or `label`). They work with both Angular Material and PrimeNG components, and accept any `Locator` or `Page` as container — use `topDialog(page)` to scope to a dialog.
-
-#### Generic field setter
-
-For data-driven scenarios, `setField` and `setFields` route to the right utility based on the value type and the widget's DOM signature — no need to know which form widget you are targeting.
-
-```typescript
-import { setField, setFields } from '@smartbit4all/playwright-qa/steps';
-
-// One field at a time
-await setField(dialog, 'data.name', 'Teszt mappa');           // → fillField
-await setField(dialog, 'data.canIncludeFiles', 'Igen');       // → selectRadio (widget has mat-radio-group)
-await setField(dialog, 'data.category', 'Ügyintézés');         // → selectOption (widget has mat-select / p-dropdown)
-await setField(dialog, 'data.isActive', true);                 // → setToggle / setCheckbox
-await setField(dialog, 'data.skills', ['Angular', 'React']);   // → selectMultiple or setChips
-await setField(dialog, 'data.deadline', '2026-04-15 14:30');   // → fillDateTime (matches YYYY-MM-DD HH:mm)
-await setField(dialog, 'data.attachment', '/path/file.pdf');   // → uploadFile (widget has smart-file-editor)
-await setField(dialog, 'permissions', { 'Olvasás': true, 'Írás': false }); // → setCheckboxGroup
-
-// Many fields at once
-await setFields(dialog, {
-  'data.name': 'Teszt mappa',
-  'data.canIncludeFiles': 'Nem',
-  'data.isActive': true,
-  'data.tags': ['urgent', 'review'],
-  'permissions': { 'Olvasás': true, 'Írás': true },
-});
-```
-
-Routing is decided by `value`'s TypeScript type plus the DOM tags inside the widget:
-- `Record<string, boolean>` → `setCheckboxGroup`
-- `boolean` + `mat-slide-toggle` / `p-inputSwitch` → `setToggle`
-- `boolean` + `mat-checkbox` / `p-checkbox` → `setCheckbox`
-- `string[]` + `mat-chip-grid` / `p-chips` → `setChips`
-- `string[]` + `p-multiSelect` / `mat-select[multiple]` → `selectMultiple`
-- `string` + `smart-file-editor` → `uploadFile`
-- `string` + `mat-select` / `p-dropdown` → `selectOption`
-- `string` + `mat-radio-group` / `p-radiobutton` → `selectRadio`
-- `string` matching `YYYY-MM-DD HH:mm` → `fillDateTime`
-- `string` + any `input` / `textarea` → `fillField`
-
-If no branch matches, `setField` throws with the identifier in the message. Datetime detection is value-format based (a single `YYYY-MM-DD HH:mm` string), since the Material datetime widget has no distinctive tag — pass an ISO date+time string and let `setField` split it.
-
-### Grid
-
-```typescript
-import {
-  selectGridRow,
-  checkGridRow,
-  checkGridRowsOnPage,
-  checkAllGridRows,
-  filterAndSelectGridRow,
-  applyGridFilters,
-  clearGridFilters,
-} from '@smartbit4all/playwright-qa/steps';
-
-// Find a row by table content (paginates automatically) and double-click it
-await selectGridRow(page, { 'Azonosító': 'DOC-001' });
-
-// Find by simple text match
-await selectGridRow(page, 'DOC-001');
-
-// Find by row data-testid (rendered from row.id on the <tr>)
-await selectGridRow(page, { rowId: 'doc-12345' });
-
-// Open the row's context menu and click an action
-await selectGridRow(page, { 'Azonosító': 'DOC-001' }, 'Szerkesztés');
-
-// Reach an action nested under submenus — pass an action path (see "Actions" below).
-// Intermediate items are submenu triggers (opened by hover), the last is the leaf (clicked).
-await selectGridRow(page, { 'Azonosító': 'DOC-001' }, ['MORE', 'EXPORT', 'PDF']);
-
-// Open context menu only (for screenshots) — pass true, then close with Escape
-await selectGridRow(page, { 'Azonosító': 'DOC-001' }, true);
-await screenshot(page, 'grid-context-menu');
-await page.keyboard.press('Escape');
-
-// Multi-select grid: check/uncheck a single row (paginates if needed)
-await checkGridRow(page, { 'Cím': 'Dokumentátor' }, true);
-await checkGridRow(page, { 'Cím': 'Dokumentátor' }, false);
-
-// Check/uncheck all matching rows on the current page (no pagination)
-await checkGridRowsOnPage(page, 'Admin', true);
-
-// Select all / deselect all via header checkbox
-await checkAllGridRows(page, true);
-
-// Use the filter form above the grid, then select the row
-await filterAndSelectGridRow(page, { 'Azonosító': 'DOC-001' });
-
-// Apply/clear filters independently
-await applyGridFilters(page, { 'Név': 'Teszt' });
-await clearGridFilters(page);
-```
-
-Column keys in a row filter accept either the header label or the header `data-testid` (rendered from `col.propertyName` on the `<th>`). Both resolve to the same column, so `{ 'Adószám': '12345' }` and `{ 'taxNumber': '12345' }` are equivalent — prefer `data-testid` for stability against label/locale changes.
-
-For row-level addressing, `{ rowId: 'doc-12345' }` matches the `<tr>` `data-testid` attribute (rendered from `row.id`). `rowId` must be the only key in the filter object and is supported by `selectGridRow`, `checkGridRow`, and `checkGridRowsOnPage`. `filterAndSelectGridRow` throws if given a `rowId` filter — use `selectGridRow` instead, since row identifiers do not need a filter form pass.
-
-All grid functions accept `Page` or `Locator` as container — use a Locator to scope to a dialog or section:
-
-```typescript
-const section = dialog.locator('smart-component-layout[data-testid="participants"]');
-await checkGridRow(section, { 'Cím': 'Dokumentátor' }, true);
-```
-
-### Navigation
-
-```typescript
-import { navigateToMain, navigateInTree } from '@smartbit4all/playwright-qa/steps';
-
-// Click the logo to return to the main screen
-await navigateToMain(page);
-
-// Navigate a tree (PrimeNG or Angular Material) — expands intermediate nodes, clicks the last one
-await navigateInTree(page, ['Ügyek']);
-await navigateInTree(page, ['Dokumentumok', 'Tender']);
-
-// Open the last node's context menu (hamburger button) and click an action
-await navigateInTree(page, ['Dokumentumok', 'Bejövő e-mail'], 'Új mappa');
-
-// Nested action: the tree path and the action path are separate arguments.
-// ['Dokumentumok','Bejövő e-mail'] is the tree path; ['MORE','NEW_FOLDER'] is the action path.
-await navigateInTree(page, ['Dokumentumok', 'Bejövő e-mail'], ['MORE', 'NEW_FOLDER']);
-
-// Open context menu only (for screenshots) — pass true, then close with Escape
-await navigateInTree(page, ['Dokumentumok', 'Bejövő e-mail'], true);
-await screenshot(page, 'context-menu-open');
-await page.keyboard.press('Escape');
-```
-
-### Actions
-
-Toolbar, navbar and menu actions — including submenus. Since ng-client #29411 an action that has
-child actions renders a **submenu**: reaching a nested action means opening the intermediate submenu
-triggers first. `clickAction` and `openActionPath` handle that with an **action path**.
-
-```typescript
-import { clickAction, openActionPath } from '@smartbit4all/playwright-qa/steps';
-
-// Single action — clicks a plain toolbar button (by data-testid, then text).
-await clickAction(page, 'SAVE');
-
-// Action path: the last element is the leaf action (clicked); the earlier elements are submenu
-// triggers opened along the way. Works whether the menu opens on hover or on click — you don't
-// need to know which.
-await clickAction(page, ['Administrator', 'Admin beállítások']);
-await clickAction(page, ['MORE', 'EXPORT', 'PDF']);
-
-// Scope to a container (dialog, section, toolbar) by passing a Locator.
-await clickAction(topDialog(page), ['MORE', 'DUPLICATE']);
-```
-
-`openActionPath` opens the same path but **returns the leaf's Locator without clicking it** — so you
-can screenshot the highlighted item and click when ready:
-
-```typescript
-const leaf = await openActionPath(page, ['MORE', 'EXPORT', 'PDF']);
-await screenshotRegionHighlight(page, 'export-pdf-highlight', findPopupMenu(page), leaf);
-await leaf.click();
-```
-
-`openActionPath` is dual-mode by whether a menu is already open: with none open, `path[0]` is the
-top-level trigger to open; with one open (e.g. after a grid/tree menu button, or after
-`navigateInTree(..., true)`), `path[0]` is the first submenu trigger inside it. `clickAction` is
-exactly `openActionPath` followed by clicking the returned leaf.
-
-The same action-path form is accepted by the grid and navigation helpers (`selectGridRow`,
-`filterAndSelectGridRow`, `navigateInTree`) for their menu action argument.
-
-### Dialog
-
-```typescript
-import { topDialog, clickInDialog } from '@smartbit4all/playwright-qa/steps';
-
-// Get the topmost open dialog (Angular Material or PrimeNG)
-const dialog = topDialog(page);
-
-// Click a button inside the topmost dialog — useful when multiple dialogs are stacked
-await clickInDialog(page, 'Mentés');
-
-// Example: dialog-in-dialog workflow
-await clickInDialog(page, 'Akció beállítás');   // opens second dialog on top
-await screenshot(page, 'second-dialog');
-await clickInDialog(page, 'Mentés');             // clicks Mentés in the TOP dialog
-// first dialog is still open
-await clickInDialog(page, 'Bezárás');            // closes first dialog
-```
-
-When multiple dialogs are open, `topDialog` always targets the last (topmost) one. This prevents accidentally clicking buttons in a background dialog.
-
-### Utilities
-
-```typescript
-import { waitForAngularIdle } from '@smartbit4all/playwright-qa/steps';
-
-// Wait for Angular SPA to settle (double networkidle with pause)
-await waitForAngularIdle(page);
-```
-
-`waitForAngularIdle` is also available for project-specific steps that need the same wait pattern.
-
-### Locators
-
-```typescript
-import { findButton, findPopupMenu, findMenuItem } from '@smartbit4all/playwright-qa/steps';
-
-// Find a button by data-testid (preferred) or visible text (fallback)
-await findButton(page, 'REFRESH').click();           // matches data-testid="REFRESH"
-await findButton(page, 'Mentés').click();             // matches button text "Mentés"
-
-// Works inside a container (e.g., dialog)
-await findButton(topDialog(page), 'Mentés').click();
-
-// Find the currently visible popup menu (Angular Material or PrimeNG)
-const menu = findPopupMenu(page);
-
-// Find a menu item by data-testid or text
-await findMenuItem(page, 'Szerkesztés').click();
-await findMenuItem(page, 'DELETE_ACTION').click();    // matches data-testid="DELETE_ACTION"
-
-// Combine with screenshot functions for highlighting
-await screenshotHighlight(page, 'menu-highlight', findMenuItem(page, 'Új mappa'));
-await screenshotRegionHighlight(page, 'menu-region',
-  findPopupMenu(page), findMenuItem(page, 'Új mappa'));
-```
-
-All built-in steps (`clickInDialog`, `selectGridRow`, `navigateInTree`) use these locators internally, so they automatically support `data-testid` values alongside text matching.
-
-### Debug
-
-```typescript
-import { dumpDom } from '@smartbit4all/playwright-qa/steps';
-
-// Dump visible elements on the page — useful when writing a new locator
-console.log(await dumpDom(page));
-
-// Scope to a container (dialog, section, grid row)
-console.log(await dumpDom(topDialog(page)));
-
-// Narrow with a selector
-console.log(await dumpDom(page, { selector: 'button, [data-testid]' }));
-
-// Include hidden elements and longer text
-console.log(await dumpDom(page, { visibleOnly: false, maxText: 200 }));
-```
-
-Each entry contains `tag`, `id`, `classes`, `testId` and own `text` (text nodes only, not the recursive `textContent`). Non-rendering tags (`script`, `style`, `meta`, `link`, `head`, `html`, `noscript`) are filtered out, and by default only visible elements are returned. Use this during test authoring to discover available `data-testid` values without manually inspecting the DOM in DevTools.
-
-The `testId` field falls back through `data-testid` → `data-automationid`. PrimeNG `MenuItem` (e.g. grid row popup menus) does not expose `data-testid`; only the `automationId` MenuItem property is supported, and it renders as the `data-automationid` DOM attribute. `findMenuItem` honors both attributes.
-
-## Developer Guide — Writing TestSteps
-
-TestSteps are simple async functions that implement one atomic UI operation.
-
-**Rules:**
-- Receive data as parameters — never import or reference datapools
-- Include locator logic, waits, technical assertions, and screenshots
-- Group related steps in one file per entity/feature
-
-```typescript
-// steps/company.steps.ts
-import { Page } from '@playwright/test';
-import { screenshot } from '@smartbit4all/playwright-qa';
-
-export async function fillCompanyForm(page: Page, company: Company) {
-  await page.fill('[data-testid="company-name"]', company.name);
-  await page.fill('[data-testid="tax-number"]', company.taxNumber);
-  await screenshot(page, 'company/form-filled');
-  await page.click('[data-testid="save-button"]');
-  await page.waitForSelector('.success-toast');
-  await screenshot(page, 'company/saved');
-}
-```
-
-## Test Designer Guide — Writing TestSuites
-
-TestSuites are Playwright `test.describe` blocks that read like a scenario script.
-
-**Rules:**
-- Call `initSuite()` in `beforeAll` to reset state and configure screenshots
-- Initialize datapools in `beforeAll`
-- Select data, then call TestSteps in order
-- Add business-level assertions
-
-```typescript
-// suites/company-management.suite.ts
-import { test } from '@playwright/test';
-import { initSuite, datapool, unique, type DataPool } from '@smartbit4all/playwright-qa';
-import { navigateToMain, selectGridRow } from '@smartbit4all/playwright-qa/steps';
-import { fillCompanyForm } from '../steps/company.steps';
-import type { Company } from '../types';
-
-test.describe('Company Management', () => {
-  let companies: DataPool<Company>;
-
-  test.beforeAll(() => {
-    initSuite({ screenshotDir: './screenshots' });
-    companies = datapool<Company>('companies');
-  });
-
-  test('Create new company', async ({ page }) => {
-    const company = companies.derive('it4all', { taxNumber: unique('TAX') });
-    await fillCompanyForm(page, company);
-    await navigateToMain(page);
-    await selectGridRow(page, { 'Adószám': company.taxNumber });
-  });
-});
-```
-
-## Seed Framework
-
-Seed populates application data from datapools — either via API or through the UI.
-
-### API Seeding
-
-```typescript
-import { registerSeedHandler, seedViaApi } from '@smartbit4all/playwright-qa';
-
-// Register a handler (project-specific)
-registerSeedHandler<Company>('companies', {
-  seed: async (company, options) => {
-    await fetch(`${options.baseUrl}/api/companies`, {
-      method: 'POST',
-      headers: { Authorization: `Bearer ${options.authToken}` },
-      body: JSON.stringify(company),
-    });
-  },
-});
-
-// Seed all companies
-const result = await seedViaApi('companies', { baseUrl, authToken });
-console.log(`Seeded ${result.success}/${result.total}`);
-```
-
-### UI Seeding
-
-```typescript
-import { registerUiSeedStep, seedViaUi } from '@smartbit4all/playwright-qa';
-
-// Register a UI seed step (reuses your TestSteps)
-registerUiSeedStep<Company>('companies', async (page, company) => {
-  await fillCompanyForm(page, company);
-});
-
-// Seed through the UI
-const result = await seedViaUi(page, 'companies', { basePath: './datapools', locale: 'hu' });
-```
-
-### Seed Profiles
-
-For complex data with dependencies, use seed profiles:
-
-```json
-{
-  "name": "development-full",
-  "order": ["users", "organizations", "companies", "documents"],
-  "dependencies": {
-    "documents": ["companies", "users"],
-    "companies": ["organizations"]
-  }
-}
-```
-
-```typescript
-import { seed } from '@smartbit4all/playwright-qa';
-
-const profile = JSON.parse(fs.readFileSync('seed-profiles/dev.json', 'utf-8'));
-const results = await seed(profile, 'api', { baseUrl, authToken, basePath: './datapools' });
-```
-
-## CI Setup
-
-### Azure DevOps
-
-1. Copy `templates/ci/playwright-qa-pipeline.yml` to your project repo
-2. Set pipeline variables:
-   - `BASE_URL`: Your application URL (e.g., `https://staging.example.com`)
-   - `LOCALE`: Datapool locale (e.g., `hu`)
-3. The pipeline will:
-   - Run all Playwright tests
-   - Publish JUnit results to the Test tab
-   - Upload screenshots and HTML report as artifacts
-
-### Project Setup
-
-Copy the `templates/playwright-qa/` directory to your project repo:
-
-```bash
-cp -r node_modules/@smartbit4all/playwright-qa/templates/playwright-qa ./playwright-qa
-cd playwright-qa
-npm install
-npx playwright install --with-deps chromium
-```
-
-## Development
-
-```bash
-git clone <repo-url>
-cd platform-playwright
-npm install
-npx playwright install --with-deps chromium
-npm test
-```
-
-### Testing locally in a project
-
-Use `npm link` to try the package in your own project without publishing:
-
-```bash
-# In platform-playwright:
-npm run build
-npm link
-
-# In your project:
-npm link @smartbit4all/playwright-qa
-```
-
-After linking, your project uses the local build directly. When you make changes to the package, rebuild with `npm run build` — no need to re-link.
-
-To remove the link later:
-
-```bash
-# In your project:
-npm unlink @smartbit4all/playwright-qa
-npm install
-```
-
-## License
-
-LGPL-3.0-or-later
+# @smartbit4all/playwright-qa
+
+Playwright-based testing and documentation framework. Provides screenshot utilities, typed datapools with locale support, and TestStep/TestSuite conventions.
+
+## Installation
+
+```bash
+npm install @smartbit4all/playwright-qa
+```
+
+Requires Node.js 20+ and Playwright as a peer dependency:
+
+```bash
+npm install @playwright/test
+npx playwright install --with-deps chromium
+```
+
+## Quick Start
+
+```typescript
+import { test } from '@playwright/test';
+import { initSuite, screenshot } from '@smartbit4all/playwright-qa';
+
+test.beforeAll(() => {
+  initSuite({ screenshotDir: './screenshots' });
+});
+
+test('take a screenshot', async ({ page }) => {
+  await page.goto('https://demo.playwright.dev/todomvc');
+  await screenshot(page, 'todomvc-home');
+});
+```
+
+## Suite Setup
+
+Every TestSuite should call `initSuite()` in `beforeAll`. This single call resets all internal state (config, datapools, screenshot directory, seed handlers) and optionally sets up the screenshot directory.
+
+```typescript
+import { initSuite } from '@smartbit4all/playwright-qa';
+
+// With screenshots — each run creates a new timestamped subdirectory
+initSuite({ screenshotDir: './screenshots' });
+
+// Clean previous run — deletes the last run's folder before creating a new one
+initSuite({ screenshotDir: './screenshots', cleanScreenshots: true });
+
+// Without screenshots — tests run normally, screenshot calls return null
+initSuite();
+```
+
+By default, each run creates a new timestamped subdirectory and the `latest` symlink always points to the most recent run. Set `cleanScreenshots: true` to delete all previous runs before starting — useful when disk space is limited or only the latest run matters.
+
+When no `screenshotDir` is provided, all screenshot functions (`screenshot`, `screenshotHighlight`, `screenshotRegion`, `screenshotRegionHighlight`) become no-ops and return `null` instead of a file path. This means TestSteps that include screenshot calls work without modification — no conditional logic needed.
+
+When multiple suites run in the same test execution with the same `screenshotDir`, the directory is created once and reused — all screenshots land in a single timestamped folder. This works even if a suite fails mid-run: the next suite picks up the same directory and continues the `autoPrefix` counter from where it left off (e.g., if the failed suite ended at `0005-`, the next suite starts at `0006-`). The framework tracks this via a `.current-run` marker file in the screenshot base directory.
+
+## Viewport
+
+Use `getViewport()` in your `playwright.config.ts` to automatically switch between full-size and headed viewport:
+
+```typescript
+import { defineConfig } from '@playwright/test';
+import { getViewport } from '@smartbit4all/playwright-qa';
+
+export default defineConfig({
+  use: {
+    viewport: getViewport(),
+  },
+});
+```
+
+When running with `--headed`, the viewport automatically shrinks to fit on screen (default: 1280x720). In headless/CI mode, the full viewport is used (default: 1920x1080). Both sizes are configurable in `playwright-qa.config.json`:
+
+```json
+{
+  "viewport": { "width": 1920, "height": 1080 },
+  "headedViewport": { "width": 1280, "height": 720 }
+}
+```
+
+## API Reference
+
+### Screenshot
+
+```typescript
+import { screenshot, screenshotHighlight, screenshotRegion, screenshotRegionHighlight } from '@smartbit4all/playwright-qa';
+
+// Full page screenshot — returns file path, or null if screenshots are disabled
+await screenshot(page, 'page-name');
+await screenshot(page, 'category/page-name');         // name path = subdirectory
+await screenshot(page, 'page-name', { fullPage: true });
+
+// Full page with highlighted element — accepts CSS selector or Locator
+await screenshotHighlight(page, 'name', '#selector');
+await screenshotHighlight(page, 'name', '#selector', { style: 'subtle' });
+await screenshotHighlight(page, 'name', findMenuItem(page, 'Új mappa'));  // Locator
+
+// Region screenshot (single element) — accepts CSS selector or Locator
+await screenshotRegion(page, 'name', '#region-selector');
+
+// Region with highlighted element inside — both accept CSS selector or Locator
+await screenshotRegionHighlight(page, 'name', '#region', '#highlight');
+await screenshotRegionHighlight(page, 'name', findPopupMenu(page), findMenuItem(page, 'Új mappa'));
+```
+
+All screenshot functions return `Promise<string | null>`. They return `null` when no screenshot directory has been configured (see [Suite Setup](#suite-setup)). Highlight and region parameters accept both CSS selectors (string) and Playwright Locators.
+
+### Datapool
+
+```typescript
+import { datapool, configureDatapool } from '@smartbit4all/playwright-qa';
+
+// Global configuration (typically in beforeAll)
+configureDatapool({ locale: 'hu', basePath: './datapools' });
+
+// Load a datapool
+const companies = datapool<Company>('companies');
+
+// Access items
+const item = companies.byKey('it4all');      // by key (meta.key field, default: "code")
+const derived = companies.derive('it4all', { name: 'Modified' }); // template + overrides
+const first = companies.findFirst('city', 'Budapest');            // first match by field
+const matches = companies.findAll('role', 'admin');               // all matches by field
+const random = companies.random();           // random item
+const all = companies.all();                 // all items
+const count = companies.count();             // count
+```
+
+## Built-in Steps
+
+The package ships reusable TestSteps for common smartbit4all UI patterns (grid, tree navigation). These are available via a separate subpath import to keep them distinct from the core API:
+
+```typescript
+import { selectGridRow, navigateInTree } from '@smartbit4all/playwright-qa/steps';
+```
+
+### Forms
+
+```typescript
+import {
+  fillField, fillDate, fillDateTime,
+  selectOption, selectMultiple, selectRadio,
+  setCheckbox, setCheckboxGroup, setToggle,
+  addChip, removeChip, setChips,
+  uploadFile,
+  toggleAccordion,
+} from '@smartbit4all/playwright-qa/steps';
+
+// Fill a text input or textarea — by data-testid (preferred) or label text (fallback)
+await fillField(dialog, 'data.name', 'Teszt mappa');               // data-testid
+await fillField(page, 'dossierContentData.name', 'Teszt dosszié'); // data-testid
+await fillField(page, 'Megjegyzés', 'Ez egy megjegyzés');           // label fallback
+
+// Date picker (ISO format YYYY-MM-DD)
+await fillDate(dialog, 'dataSheet.startDate', '2026-04-15');
+
+// Date-time picker (date + time)
+await fillDateTime(dialog, 'data.deadline', '2026-04-15', '14:30');
+
+// Select from a dropdown (mat-select / p-dropdown) — by data-testid or label
+await selectOption(page, 'selectedDocumentTypeCategory', 'Ügyintézés');  // data-testid
+await selectOption(dialog, 'Kategória', 'Ügyintézés');                   // label fallback
+
+// Multi-select dropdown
+await selectMultiple(dialog, 'data.skills', ['Angular', 'React', 'Vue']);
+
+// Select a radio button — by data-testid on the radio group or label
+await selectRadio(dialog, 'data.canIncludeFiles', 'Nem');       // data-testid
+await selectRadio(dialog, 'Tartalmazhat almappákat', 'Igen');   // label fallback
+
+// Set a checkbox — by data-testid or label
+await setCheckbox(dialog, 'Aktív', true);
+
+// Checkbox group (CHECK_BOX_2) — set multiple checkboxes at once
+await setCheckboxGroup(dialog, 'permissions', { 'Olvasás': true, 'Írás': true, 'Törlés': false });
+
+// Toggle switch
+await setToggle(dialog, 'data.isActive', true);
+
+// Chips — add, remove, or set declaratively
+await addChip(dialog, 'data.tags', 'urgent');
+await removeChip(dialog, 'data.tags', 'draft');
+await setChips(dialog, 'data.tags', ['urgent', 'review']);
+
+// File upload
+await uploadFile(dialog, 'data.attachment', '/path/to/file.pdf');
+
+// Open/close an accordion tab/panel (p-accordion / mat-accordion) — by data-testid or header text.
+// Returns a Locator scoped to the tab's content region, for acting on elements inside it.
+await toggleAccordion(dialog, 'Alapadatok', false);  // close, ignore the returned content
+const content = await toggleAccordion(dialog, 'Alapadatok', true);   // open
+await fillField(content, 'data.note', 'Ez egy megjegyzés');
+```
+
+All form utilities accept a `data-testid` value or a visible label text as identifier. When a `data-testid` match is found on the element, it takes priority; otherwise the function falls back to label text matching (`.smart-form-widget-label`, `h3`, `h4`, or `label`). They work with both Angular Material and PrimeNG components, and accept any `Locator` or `Page` as container — use `topDialog(page)` to scope to a dialog.
+
+#### Generic field setter
+
+For data-driven scenarios, `setField` and `setFields` route to the right utility based on the value type and the widget's DOM signature — no need to know which form widget you are targeting.
+
+```typescript
+import { setField, setFields } from '@smartbit4all/playwright-qa/steps';
+
+// One field at a time
+await setField(dialog, 'data.name', 'Teszt mappa');           // → fillField
+await setField(dialog, 'data.canIncludeFiles', 'Igen');       // → selectRadio (widget has mat-radio-group)
+await setField(dialog, 'data.category', 'Ügyintézés');         // → selectOption (widget has mat-select / p-dropdown)
+await setField(dialog, 'data.isActive', true);                 // → setToggle / setCheckbox
+await setField(dialog, 'data.skills', ['Angular', 'React']);   // → selectMultiple or setChips
+await setField(dialog, 'data.deadline', '2026-04-15 14:30');   // → fillDateTime (matches YYYY-MM-DD HH:mm)
+await setField(dialog, 'data.attachment', '/path/file.pdf');   // → uploadFile (widget has smart-file-editor)
+await setField(dialog, 'permissions', { 'Olvasás': true, 'Írás': false }); // → setCheckboxGroup
+
+// Many fields at once
+await setFields(dialog, {
+  'data.name': 'Teszt mappa',
+  'data.canIncludeFiles': 'Nem',
+  'data.isActive': true,
+  'data.tags': ['urgent', 'review'],
+  'permissions': { 'Olvasás': true, 'Írás': true },
+});
+```
+
+Routing is decided by `value`'s TypeScript type plus the DOM tags inside the widget:
+- `Record<string, boolean>` → `setCheckboxGroup`
+- `boolean` + `mat-slide-toggle` / `p-inputSwitch` → `setToggle`
+- `boolean` + `mat-checkbox` / `p-checkbox` → `setCheckbox`
+- `string[]` + `mat-chip-grid` / `p-chips` → `setChips`
+- `string[]` + `p-multiSelect` / `mat-select[multiple]` → `selectMultiple`
+- `string` + `smart-file-editor` → `uploadFile`
+- `string` + `mat-select` / `p-dropdown` → `selectOption`
+- `string` + `mat-radio-group` / `p-radiobutton` → `selectRadio`
+- `string` matching `YYYY-MM-DD HH:mm` → `fillDateTime`
+- `string` + any `input` / `textarea` → `fillField`
+
+If no branch matches, `setField` throws with the identifier in the message. Datetime detection is value-format based (a single `YYYY-MM-DD HH:mm` string), since the Material datetime widget has no distinctive tag — pass an ISO date+time string and let `setField` split it.
+
+### Grid
+
+```typescript
+import {
+  selectGridRow,
+  checkGridRow,
+  checkGridRowsOnPage,
+  checkAllGridRows,
+  filterAndSelectGridRow,
+  applyGridFilters,
+  clearGridFilters,
+} from '@smartbit4all/playwright-qa/steps';
+
+// Find a row by table content (paginates automatically) and double-click it
+await selectGridRow(page, { 'Azonosító': 'DOC-001' });
+
+// Find by simple text match
+await selectGridRow(page, 'DOC-001');
+
+// Find by row data-testid (rendered from row.id on the <tr>)
+await selectGridRow(page, { rowId: 'doc-12345' });
+
+// Open the row's context menu and click an action
+await selectGridRow(page, { 'Azonosító': 'DOC-001' }, 'Szerkesztés');
+
+// Reach an action nested under submenus — pass an action path (see "Actions" below).
+// Intermediate items are submenu triggers (opened by hover), the last is the leaf (clicked).
+await selectGridRow(page, { 'Azonosító': 'DOC-001' }, ['MORE', 'EXPORT', 'PDF']);
+
+// Open context menu only (for screenshots) — pass true, then close with Escape
+await selectGridRow(page, { 'Azonosító': 'DOC-001' }, true);
+await screenshot(page, 'grid-context-menu');
+await page.keyboard.press('Escape');
+
+// Multi-select grid: check/uncheck a single row (paginates if needed)
+await checkGridRow(page, { 'Cím': 'Dokumentátor' }, true);
+await checkGridRow(page, { 'Cím': 'Dokumentátor' }, false);
+
+// Check/uncheck all matching rows on the current page (no pagination)
+await checkGridRowsOnPage(page, 'Admin', true);
+
+// Select all / deselect all via header checkbox
+await checkAllGridRows(page, true);
+
+// Use the filter form above the grid, then select the row
+await filterAndSelectGridRow(page, { 'Azonosító': 'DOC-001' });
+
+// Apply/clear filters independently
+await applyGridFilters(page, { 'Név': 'Teszt' });
+await clearGridFilters(page);
+```
+
+Column keys in a row filter accept either the header label or the header `data-testid` (rendered from `col.propertyName` on the `<th>`). Both resolve to the same column, so `{ 'Adószám': '12345' }` and `{ 'taxNumber': '12345' }` are equivalent — prefer `data-testid` for stability against label/locale changes.
+
+For row-level addressing, `{ rowId: 'doc-12345' }` matches the `<tr>` `data-testid` attribute (rendered from `row.id`). `rowId` must be the only key in the filter object and is supported by `selectGridRow`, `checkGridRow`, and `checkGridRowsOnPage`. `filterAndSelectGridRow` throws if given a `rowId` filter — use `selectGridRow` instead, since row identifiers do not need a filter form pass.
+
+All grid functions accept `Page` or `Locator` as container — use a Locator to scope to a dialog or section:
+
+```typescript
+const section = dialog.locator('smart-component-layout[data-testid="participants"]');
+await checkGridRow(section, { 'Cím': 'Dokumentátor' }, true);
+```
+
+### Navigation
+
+```typescript
+import { navigateToMain, navigateInTree } from '@smartbit4all/playwright-qa/steps';
+
+// Click the logo to return to the main screen
+await navigateToMain(page);
+
+// Navigate a tree (PrimeNG or Angular Material) — expands intermediate nodes, clicks the last one
+await navigateInTree(page, ['Ügyek']);
+await navigateInTree(page, ['Dokumentumok', 'Tender']);
+
+// Open the last node's context menu (hamburger button) and click an action
+await navigateInTree(page, ['Dokumentumok', 'Bejövő e-mail'], 'Új mappa');
+
+// Nested action: the tree path and the action path are separate arguments.
+// ['Dokumentumok','Bejövő e-mail'] is the tree path; ['MORE','NEW_FOLDER'] is the action path.
+await navigateInTree(page, ['Dokumentumok', 'Bejövő e-mail'], ['MORE', 'NEW_FOLDER']);
+
+// Open context menu only (for screenshots) — pass true, then close with Escape
+await navigateInTree(page, ['Dokumentumok', 'Bejövő e-mail'], true);
+await screenshot(page, 'context-menu-open');
+await page.keyboard.press('Escape');
+```
+
+### Actions
+
+Toolbar, navbar and menu actions — including submenus. Since ng-client #29411 an action that has
+child actions renders a **submenu**: reaching a nested action means opening the intermediate submenu
+triggers first. `clickAction` and `openActionPath` handle that with an **action path**.
+
+```typescript
+import { clickAction, openActionPath } from '@smartbit4all/playwright-qa/steps';
+
+// Single action — clicks a plain toolbar button (by data-testid, then text).
+await clickAction(page, 'SAVE');
+
+// Action path: the last element is the leaf action (clicked); the earlier elements are submenu
+// triggers opened along the way. Works whether the menu opens on hover or on click — you don't
+// need to know which.
+await clickAction(page, ['Administrator', 'Admin beállítások']);
+await clickAction(page, ['MORE', 'EXPORT', 'PDF']);
+
+// Scope to a container (dialog, section, toolbar) by passing a Locator.
+await clickAction(topDialog(page), ['MORE', 'DUPLICATE']);
+```
+
+`openActionPath` opens the same path but **returns the leaf's Locator without clicking it** — so you
+can screenshot the highlighted item and click when ready:
+
+```typescript
+const leaf = await openActionPath(page, ['MORE', 'EXPORT', 'PDF']);
+await screenshotRegionHighlight(page, 'export-pdf-highlight', findPopupMenu(page), leaf);
+await leaf.click();
+```
+
+`openActionPath` is dual-mode by whether a menu is already open: with none open, `path[0]` is the
+top-level trigger to open; with one open (e.g. after a grid/tree menu button, or after
+`navigateInTree(..., true)`), `path[0]` is the first submenu trigger inside it. `clickAction` is
+exactly `openActionPath` followed by clicking the returned leaf.
+
+The same action-path form is accepted by the grid and navigation helpers (`selectGridRow`,
+`filterAndSelectGridRow`, `navigateInTree`) for their menu action argument.
+
+### Dialog
+
+```typescript
+import { topDialog, clickInDialog } from '@smartbit4all/playwright-qa/steps';
+
+// Get the topmost open dialog (Angular Material or PrimeNG)
+const dialog = topDialog(page);
+
+// Click a button inside the topmost dialog — useful when multiple dialogs are stacked
+await clickInDialog(page, 'Mentés');
+
+// Example: dialog-in-dialog workflow
+await clickInDialog(page, 'Akció beállítás');   // opens second dialog on top
+await screenshot(page, 'second-dialog');
+await clickInDialog(page, 'Mentés');             // clicks Mentés in the TOP dialog
+// first dialog is still open
+await clickInDialog(page, 'Bezárás');            // closes first dialog
+```
+
+When multiple dialogs are open, `topDialog` always targets the last (topmost) one. This prevents accidentally clicking buttons in a background dialog.
+
+### Utilities
+
+```typescript
+import { waitForAngularIdle } from '@smartbit4all/playwright-qa/steps';
+
+// Wait for Angular SPA to settle (double networkidle with pause)
+await waitForAngularIdle(page);
+```
+
+`waitForAngularIdle` is also available for project-specific steps that need the same wait pattern.
+
+### Locators
+
+```typescript
+import { findButton, findPopupMenu, findMenuItem } from '@smartbit4all/playwright-qa/steps';
+
+// Find a button by data-testid (preferred) or visible text (fallback)
+await findButton(page, 'REFRESH').click();           // matches data-testid="REFRESH"
+await findButton(page, 'Mentés').click();             // matches button text "Mentés"
+
+// Works inside a container (e.g., dialog)
+await findButton(topDialog(page), 'Mentés').click();
+
+// Find the currently visible popup menu (Angular Material or PrimeNG)
+const menu = findPopupMenu(page);
+
+// Find a menu item by data-testid or text
+await findMenuItem(page, 'Szerkesztés').click();
+await findMenuItem(page, 'DELETE_ACTION').click();    // matches data-testid="DELETE_ACTION"
+
+// Combine with screenshot functions for highlighting
+await screenshotHighlight(page, 'menu-highlight', findMenuItem(page, 'Új mappa'));
+await screenshotRegionHighlight(page, 'menu-region',
+  findPopupMenu(page), findMenuItem(page, 'Új mappa'));
+```
+
+All built-in steps (`clickInDialog`, `selectGridRow`, `navigateInTree`) use these locators internally, so they automatically support `data-testid` values alongside text matching.
+
+### Debug
+
+```typescript
+import { dumpDom } from '@smartbit4all/playwright-qa/steps';
+
+// Dump visible elements on the page — useful when writing a new locator
+console.log(await dumpDom(page));
+
+// Scope to a container (dialog, section, grid row)
+console.log(await dumpDom(topDialog(page)));
+
+// Narrow with a selector
+console.log(await dumpDom(page, { selector: 'button, [data-testid]' }));
+
+// Include hidden elements and longer text
+console.log(await dumpDom(page, { visibleOnly: false, maxText: 200 }));
+```
+
+Each entry contains `tag`, `id`, `classes`, `testId` and own `text` (text nodes only, not the recursive `textContent`). Non-rendering tags (`script`, `style`, `meta`, `link`, `head`, `html`, `noscript`) are filtered out, and by default only visible elements are returned. Use this during test authoring to discover available `data-testid` values without manually inspecting the DOM in DevTools.
+
+The `testId` field falls back through `data-testid` → `data-automationid`. PrimeNG `MenuItem` (e.g. grid row popup menus) does not expose `data-testid`; only the `automationId` MenuItem property is supported, and it renders as the `data-automationid` DOM attribute. `findMenuItem` honors both attributes.
+
+## Developer Guide — Writing TestSteps
+
+TestSteps are simple async functions that implement one atomic UI operation.
+
+**Rules:**
+- Receive data as parameters — never import or reference datapools
+- Include locator logic, waits, technical assertions, and screenshots
+- Group related steps in one file per entity/feature
+
+```typescript
+// steps/company.steps.ts
+import { Page } from '@playwright/test';
+import { screenshot } from '@smartbit4all/playwright-qa';
+
+export async function fillCompanyForm(page: Page, company: Company) {
+  await page.fill('[data-testid="company-name"]', company.name);
+  await page.fill('[data-testid="tax-number"]', company.taxNumber);
+  await screenshot(page, 'company/form-filled');
+  await page.click('[data-testid="save-button"]');
+  await page.waitForSelector('.success-toast');
+  await screenshot(page, 'company/saved');
+}
+```
+
+## Test Designer Guide — Writing TestSuites
+
+TestSuites are Playwright `test.describe` blocks that read like a scenario script.
+
+**Rules:**
+- Call `initSuite()` in `beforeAll` to reset state and configure screenshots
+- Initialize datapools in `beforeAll`
+- Select data, then call TestSteps in order
+- Add business-level assertions
+
+```typescript
+// suites/company-management.suite.ts
+import { test } from '@playwright/test';
+import { initSuite, datapool, unique, type DataPool } from '@smartbit4all/playwright-qa';
+import { navigateToMain, selectGridRow } from '@smartbit4all/playwright-qa/steps';
+import { fillCompanyForm } from '../steps/company.steps';
+import type { Company } from '../types';
+
+test.describe('Company Management', () => {
+  let companies: DataPool<Company>;
+
+  test.beforeAll(() => {
+    initSuite({ screenshotDir: './screenshots' });
+    companies = datapool<Company>('companies');
+  });
+
+  test('Create new company', async ({ page }) => {
+    const company = companies.derive('it4all', { taxNumber: unique('TAX') });
+    await fillCompanyForm(page, company);
+    await navigateToMain(page);
+    await selectGridRow(page, { 'Adószám': company.taxNumber });
+  });
+});
+```
+
+## Seed Framework
+
+Seed populates application data from datapools — either via API or through the UI.
+
+### API Seeding
+
+```typescript
+import { registerSeedHandler, seedViaApi } from '@smartbit4all/playwright-qa';
+
+// Register a handler (project-specific)
+registerSeedHandler<Company>('companies', {
+  seed: async (company, options) => {
+    await fetch(`${options.baseUrl}/api/companies`, {
+      method: 'POST',
+      headers: { Authorization: `Bearer ${options.authToken}` },
+      body: JSON.stringify(company),
+    });
+  },
+});
+
+// Seed all companies
+const result = await seedViaApi('companies', { baseUrl, authToken });
+console.log(`Seeded ${result.success}/${result.total}`);
+```
+
+### UI Seeding
+
+```typescript
+import { registerUiSeedStep, seedViaUi } from '@smartbit4all/playwright-qa';
+
+// Register a UI seed step (reuses your TestSteps)
+registerUiSeedStep<Company>('companies', async (page, company) => {
+  await fillCompanyForm(page, company);
+});
+
+// Seed through the UI
+const result = await seedViaUi(page, 'companies', { basePath: './datapools', locale: 'hu' });
+```
+
+### Seed Profiles
+
+For complex data with dependencies, use seed profiles:
+
+```json
+{
+  "name": "development-full",
+  "order": ["users", "organizations", "companies", "documents"],
+  "dependencies": {
+    "documents": ["companies", "users"],
+    "companies": ["organizations"]
+  }
+}
+```
+
+```typescript
+import { seed } from '@smartbit4all/playwright-qa';
+
+const profile = JSON.parse(fs.readFileSync('seed-profiles/dev.json', 'utf-8'));
+const results = await seed(profile, 'api', { baseUrl, authToken, basePath: './datapools' });
+```
+
+## CI Setup
+
+### Azure DevOps
+
+1. Copy `templates/ci/playwright-qa-pipeline.yml` to your project repo
+2. Set pipeline variables:
+   - `BASE_URL`: Your application URL (e.g., `https://staging.example.com`)
+   - `LOCALE`: Datapool locale (e.g., `hu`)
+3. The pipeline will:
+   - Run all Playwright tests
+   - Publish JUnit results to the Test tab
+   - Upload screenshots and HTML report as artifacts
+
+### Project Setup
+
+Copy the `templates/playwright-qa/` directory to your project repo:
+
+```bash
+cp -r node_modules/@smartbit4all/playwright-qa/templates/playwright-qa ./playwright-qa
+cd playwright-qa
+npm install
+npx playwright install --with-deps chromium
+```
+
+## Development
+
+```bash
+git clone <repo-url>
+cd platform-playwright
+npm install
+npx playwright install --with-deps chromium
+npm test
+```
+
+### Testing locally in a project
+
+Use `npm link` to try the package in your own project without publishing:
+
+```bash
+# In platform-playwright:
+npm run build
+npm link
+
+# In your project:
+npm link @smartbit4all/playwright-qa
+```
+
+After linking, your project uses the local build directly. When you make changes to the package, rebuild with `npm run build` — no need to re-link.
+
+To remove the link later:
+
+```bash
+# In your project:
+npm unlink @smartbit4all/playwright-qa
+npm install
+```
+
+## License
+
+LGPL-3.0-or-later