@sitevision/api 2023.2.1 → 2023.2.2-beta.2

package/types/senselogic/sitevision/api/property/VersionedPropertyUtil/index.d.ts

@@ -1,52 +1,57 @@
+import type { String } from "../../../../../java/lang/String";
+import type { List } from "../../../../../java/util/List";
+
+import type { Calendar } from "../../../../../java/util/Calendar";
+
 import type { Binary } from "../../../../../javax/jcr/Binary";
 
 /**
  * Utility interface for getting Node property values in a specific version.
  *
- * <p>
- *    This is an exotic sibling interface to {@link senselogic.sitevision.api.property.PropertyUtil} that can be used to extract property
- *    values from another version than the one you are currently executing in. If you don't know what a version is or haven't
- *    thought much about it, you would typically use the "normal" property extraction interface - {@link PropertyUtil}.
- * </p>
+ *  <p>
+ *     This is an exotic sibling interface to {@link senselogic.sitevision.api.property.PropertyUtil} that can be used to extract property
+ *     values from another version than the one you are currently executing in. If you don't know what a version is or haven't
+ *     thought much about it, you would typically use the "normal" property extraction interface - {@link PropertyUtil}.
+ *  </p>
  *
- * <p>
- *    <strong>Performance note!</strong> {@link PropertyUtil} will always outperform <code>VersionedPropertyUtil</code> when executing
- *    in the same version! <em>(Tip! Use {@link senselogic.sitevision.api.versioning.VersionUtil#getCurrentVersion()} to check what
- *    version you are currently executing in to decide if you should use <code>PropertyUtil</code> or <code>VersionedPropertyUtil</code>)</em>.
- * </p>
+ *  <p>
+ *     <strong>Performance note!</strong> {@link PropertyUtil} will always outperform <code>VersionedPropertyUtil</code> when executing
+ *     in the same version! <em>(Tip! Use {@link senselogic.sitevision.api.versioning.VersionUtil#getCurrentVersion()} to check what
+ *     version you are currently executing in to decide if you should use <code>PropertyUtil</code> or <code>VersionedPropertyUtil</code>)</em>.
+ *  </p>
  *
- * <p>
- *    <strong>Note!</strong> Ensure to take the necessary precautions when using this interface. Even if a node exists in the
- *    version you are currently executing in, it might not exist in another version.
- * </p>
+ *  <p>
+ *     <strong>Note!</strong> Ensure to take the necessary precautions when using this interface. Even if a node exists in the
+ *     version you are currently executing in, it might not exist in another version.
+ *  </p>
  *
- * <p>
- *    <strong>An example</strong> of a usecase where you actually might need to use this interface instead of <code>PropertyUtil</code>:
- *    <em>You have a function that depends on "Friendly URL" values. Since Friendly URLs only exist in the ONLINE ("published")
- *    version, you might need this interface to ensure that your function will work properly in the OFFLINE version ("editing mode") as well.
- *    Velocity excerpt below:</em>
- * </p>
- * <pre><code>
- *    <em>## Extract display name</em>
- *    #set ($propertyUtil = ...)
- *    #set ($theName = $propertyUtil.getString($myNode, 'displayName'))
+ *  <p>
+ *     <strong>An example</strong> of a usecase where you actually might need to use this interface instead of <code>PropertyUtil</code>:
+ *     <em>You have a function that depends on "Friendly URL" values. Since Friendly URLs only exist in the ONLINE ("published")
+ *     version, you might need this interface to ensure that your function will work properly in the OFFLINE version ("editing mode") as well.
+ *     Velocity excerpt below:</em>
+ *  </p>
+ *  <pre><code>
+ *     <em>## Extract display name</em>
+ *     #set ($propertyUtil = ...)
+ *     #set ($theName = $propertyUtil.getString($myNode, 'displayName'))
  *
- *    <em>## Extract online URL when possible</em>
- *    #set ($theURL = '')
- *    #set ($versionUtil = ...)
- *    #if ($versionUtil.currentVersion != $versionUtil.ONLINE_VERSION)
- *       #set ($versionedPropertyUtil = $sitevisionUtils.getVersionedPropertyUtil($versionUtil.ONLINE_VERSION))
- *       #set ($theURL = $versionedPropertyUtil.getString($myNode.identifier, 'URL', ''))
- *    #end
- *    #if ($theURL == '')
- *       #set ($theURL = $propertyUtil.getString($myNode, 'URL'))
- *    #end</code></pre>
+ *     <em>## Extract online URL when possible</em>
+ *     #set ($theURL = '')
+ *     #set ($versionUtil = ...)
+ *     #if ($versionUtil.currentVersion != $versionUtil.ONLINE_VERSION)
+ *        #set ($versionedPropertyUtil = $sitevisionUtils.getVersionedPropertyUtil($versionUtil.ONLINE_VERSION))
+ *        #set ($theURL = $versionedPropertyUtil.getString($myNode.identifier, 'URL', ''))
+ *     #end
+ *     #if ($theURL == '')
+ *        #set ($theURL = $propertyUtil.getString($myNode, 'URL'))
+ *     #end</code></pre>
  *
- * <p>
- *    An instance of the Sitevision class implementing this interface can be obtained via
- *    {@link senselogic.sitevision.api.Utils#getVersionedPropertyUtil(int)}.
- *    See {@link senselogic.sitevision.api.Utils} for how to obtain an instance of the <code>Utils</code> interface.
- * </p>
+ *  <p>
+ *     An instance of the Sitevision class implementing this interface can be obtained via
+ *     {@link senselogic.sitevision.api.Utils#getVersionedPropertyUtil(int)}.
+ *     See {@link senselogic.sitevision.api.Utils} for how to obtain an instance of the <code>Utils</code> interface.
+ *  </p>
  * @author Magnus Lövgren
  * @since Sitevision 3.0
  * @see OfflineVersionPropertyUtil
@@ -56,79 +61,82 @@ export type VersionedPropertyUtil = {
   /**
    * Gets a String property from a potential Node in a specific version.
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aPropertyName the name of the property
    * @return the value for <code>aPropertyName</code> as <code>String</code>. If no node or property exists, <code>null</code> is returned.
    */
-  getString(aNodeIdentifier: string, aPropertyName: string): string;
+  getString(
+    aNodeIdentifier: String | string,
+    aPropertyName: String | string
+  ): string;
 
   /**
    * Gets a String property from a potential Node in a specific version - with a fallback value if the property doesn't exist.
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aPropertyName the name of the property
    * @param aDefaultValue fallback value if no value exists
    * @return the value for <code>aPropertyName</code> as <code>String</code>. If no node or property exists, <code>aDefaultValue</code> is returned.
    */
   getString(
-    aNodeIdentifier: string,
-    aPropertyName: string,
-    aDefaultValue: string
+    aNodeIdentifier: String | string,
+    aPropertyName: String | string,
+    aDefaultValue: String | string
   ): string;
 
   /**
    * Gets a String property from a potential "nested" Node's property in a specific version.
-   * (i.e. the base <code>Node</code> has a property that is a <code>Node</code>,
-   * and that "inner/nested" <code>Node</code> has a <code>String</code> property).
+   *  (i.e. the base <code>Node</code> has a property that is a <code>Node</code>,
+   *  and that "inner/nested" <code>Node</code> has a <code>String</code> property).
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aNodePropertyName</code> and <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aNodePropertyName</code> and <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aNodePropertyName the name of the "inner/nested" <code>Node</code> that is a property on aNode
    * @param aPropertyName the name of the property for the "inner/nested" <code>Node</code>
    * @return the value for <code>aPropertyName</code> as <code>String</code>. If no node or property exists, <code>null</code> is returned.
    */
   getNestedString(
-    aNodeIdentifier: string,
-    aNodePropertyName: string,
-    aPropertyName: string
+    aNodeIdentifier: String | string,
+    aNodePropertyName: String | string,
+    aPropertyName: String | string
   ): string;
 
   /**
    * Gets a String property from a potential "nested" Node's property in a specific version - with a fallback value if the property doesn't exist.
-   * (i.e. the base <code>Node</code> has a property that is a <code>Node</code>,
-   * and that "inner/nested" <code>Node</code> has a <code>String</code> property).
+   *  (i.e. the base <code>Node</code> has a property that is a <code>Node</code>,
+   *  and that "inner/nested" <code>Node</code> has a <code>String</code> property).
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aNodePropertyName</code> and <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aNodePropertyName</code> and <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aNodePropertyName the name of the "inner/nested" <code>Node</code> that is a property on aNode
    * @param aPropertyName the name of the property for the "inner/nested" <code>Node</code>
@@ -136,316 +144,334 @@ export type VersionedPropertyUtil = {
    * @return the value for <code>aPropertyName</code> as <code>String</code>. If no node or property exists, <code>aDefaultValue</code> is returned.
    */
   getNestedString(
-    aNodeIdentifier: string,
-    aNodePropertyName: string,
-    aPropertyName: string,
-    aDefaultValue: string
+    aNodeIdentifier: String | string,
+    aNodePropertyName: String | string,
+    aPropertyName: String | string,
+    aDefaultValue: String | string
   ): string;
 
   /**
    * Gets a <code>List</code> of property values from a potential Node in a specific version.
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aPropertyName the name of the property
-   * @return the value for <code>aPropertyName</code> as <code>String</code>. If the property is single valued a list with one element is returned. If no node or property exists, <code>null</code> is returned.
+   * @return the value for <code>aPropertyName</code> as <code>String</code>.&#xA; If the property is single valued a list with one element is returned. If no node or property exists, <code>null</code> is returned.
    */
-  getStrings(aNodeIdentifier: string, aPropertyName: string): unknown;
+  getStrings(
+    aNodeIdentifier: String | string,
+    aPropertyName: String | string
+  ): List;
 
   /**
    * Gets a <code>List</code> of property values from a potential Node in a specific version - with a fallback value if the property doesn't exist.
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aPropertyName the name of the property
    * @param aDefaultValue fallback value if no value exists
-   * @return the value for <code>aPropertyName</code> as <code>String</code>. If the property is single valued a list with one element is returned. If no node or property exists, <code>aDefaultValue</code> is returned.
+   * @return the value for <code>aPropertyName</code> as <code>String</code>.&#xA; If the property is single valued a list with one element is returned.&#xA; If no node or property exists, <code>aDefaultValue</code> is returned.
    */
   getStrings(
-    aNodeIdentifier: string,
-    aPropertyName: string,
-    aDefaultValue: unknown
-  ): unknown;
+    aNodeIdentifier: String | string,
+    aPropertyName: String | string,
+    aDefaultValue: List | unknown[]
+  ): List;
 
   /**
    * Gets a <code>List</code> of property values from a potential "nested" Node's property in a specific version.
-   * (i.e. the base <code>Node</code> has a property that is a <code>Node</code>,
-   * and that "inner/nested" <code>Node</code> has a <code>String</code> property).
+   *  (i.e. the base <code>Node</code> has a property that is a <code>Node</code>,
+   *  and that "inner/nested" <code>Node</code> has a <code>String</code> property).
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aNodePropertyName</code> and <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aNodePropertyName</code> and <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aNodePropertyName the name of the "inner/nested" <code>Node</code> that is a property on aNode
    * @param aPropertyName the name of the property for the "inner/nested" <code>Node</code>
-   * @return the value for <code>aPropertyName</code> as <code>String</code>. If the property is single valued a list with one element is returned. If no node or property exists, <code>null</code> is returned.
+   * @return the value for <code>aPropertyName</code> as <code>String</code>.&#xA; If the property is single valued a list with one element is returned. If no node or property exists, <code>null</code> is returned.
    */
   getNestedStrings(
-    aNodeIdentifier: string,
-    aNodePropertyName: string,
-    aPropertyName: string
-  ): unknown;
+    aNodeIdentifier: String | string,
+    aNodePropertyName: String | string,
+    aPropertyName: String | string
+  ): List;
 
   /**
    * Gets a <code>List</code> of property values from a potential "nested" Node's property in a specific version
-   * - with a fallback value if the property doesn't exist.
-   * (i.e. the base <code>Node</code> has a property that is a <code>Node</code>,
-   * and that "inner/nested" <code>Node</code> has a <code>String</code> property).
+   *  - with a fallback value if the property doesn't exist.
+   *  (i.e. the base <code>Node</code> has a property that is a <code>Node</code>,
+   *  and that "inner/nested" <code>Node</code> has a <code>String</code> property).
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aNodePropertyName</code> and <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aNodePropertyName</code> and <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aNodePropertyName the name of the "inner/nested" <code>Node</code> that is a property on aNode
    * @param aPropertyName the name of the property for the "inner/nested" <code>Node</code>
    * @param aDefaultValue fallback value if no value exists
-   * @return the value for <code>aPropertyName</code> as <code>String</code>. If the property is single valued a list with one element is returned. If no node or property exists, <code>aDefaultValue</code> is returned.
+   * @return the value for <code>aPropertyName</code> as <code>String</code>.&#xA; If the property is single valued a list with one element is returned.&#xA; If no node or property exists, <code>aDefaultValue</code> is returned.
    */
   getNestedStrings(
-    aNodeIdentifier: string,
-    aNodePropertyName: string,
-    aPropertyName: string,
-    aDefaultValue: unknown
-  ): unknown;
+    aNodeIdentifier: String | string,
+    aNodePropertyName: String | string,
+    aPropertyName: String | string,
+    aDefaultValue: List | unknown[]
+  ): List;
 
   /**
    * Gets an int property from a potential Node in a specific version.
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aPropertyName the name of the property
-   * @return the <code>int</code> value for aPropertyName. If no node or property exists or it isn't compatible with an <code>int</code>, 0 is returned.
+   * @return the <code>int</code> value for aPropertyName.&#xA; If no node or property exists or it isn't compatible with an <code>int</code>, 0 is returned.
    */
-  getInt(aNodeIdentifier: string, aPropertyName: string): number;
+  getInt(
+    aNodeIdentifier: String | string,
+    aPropertyName: String | string
+  ): number;
 
   /**
    * Gets an int property from a potential node in a specific version -  with a fallback value if the property doesn't exist.
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aPropertyName the name of the property
    * @param aDefaultValue fallback value if no value exists
-   * @return the <code>int</code> value for <code>aPropertyName</code>. If no node or property exists or it isn't compatible with an <code>int</code>, <code>aDefaultValue</code> is returned.
+   * @return the <code>int</code> value for <code>aPropertyName</code>.&#xA; If no node or property exists or it isn't compatible with an <code>int</code>, <code>aDefaultValue</code> is returned.
    */
   getInt(
-    aNodeIdentifier: string,
-    aPropertyName: string,
+    aNodeIdentifier: String | string,
+    aPropertyName: String | string,
     aDefaultValue: number
   ): number;
 
   /**
    * Gets a boolean property from a potential Node in a specific version.
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aPropertyName the name of the property
-   * @return the value for <code>aPropertyName</code> as <code>boolean</code>. If no node or property exists or it isn't compatible with a <code>boolean</code>, <code>false</code> is returned.
+   * @return the value for <code>aPropertyName</code> as <code>boolean</code>.&#xA; If no node or property exists or it isn't compatible with a <code>boolean</code>, <code>false</code> is returned.
    */
-  getBoolean(aNodeIdentifier: string, aPropertyName: string): boolean;
+  getBoolean(
+    aNodeIdentifier: String | string,
+    aPropertyName: String | string
+  ): boolean;
 
   /**
    * Gets a boolean property from a potential Node in a specific version - with a fallback value if the property doesn't exist.
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aPropertyName the name of the property
    * @param aDefaultValue fallback value if no value exists
-   * @return the value for <code>aPropertyName</code> as <code>boolean</code>. If no node or property exists or it isn't compatible with a <code>boolean</code>, <code>aDefaultValue</code> is returned.
+   * @return the value for <code>aPropertyName</code> as <code>boolean</code>.&#xA; If no node or property exists or it isn't compatible with a <code>boolean</code>, <code>aDefaultValue</code> is returned.
    */
   getBoolean(
-    aNodeIdentifier: string,
-    aPropertyName: string,
+    aNodeIdentifier: String | string,
+    aPropertyName: String | string,
     aDefaultValue: boolean
   ): boolean;
 
   /**
    * Gets a Calendar property from a potential Node in a specific version.
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aPropertyName the name of the property
-   * @return the value for <code>aPropertyName</code> as <code>Calendar</code>. If no node or property exists or it isn't a <code>Calendar</code>, <code>null</code> is returned.
+   * @return the value for <code>aPropertyName</code> as <code>Calendar</code>.&#xA; If no node or property exists or it isn't a <code>Calendar</code>, <code>null</code> is returned.
    */
-  getCalendar(aNodeIdentifier: string, aPropertyName: string): unknown;
+  getCalendar(
+    aNodeIdentifier: String | string,
+    aPropertyName: String | string
+  ): Calendar;
 
   /**
    * Gets a Calendar property from a potential Node in a specific version - with a fallback value if the property doesn't exist.
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aPropertyName the name of the property
    * @param aDefaultValue fallback value if no value exists
-   * @return the value for <code>aPropertyName</code> as <code>Calendar</code>. If no node or property exists or it isn't compatible with a <code>Calendar</code>, <code>aDefaultValue</code> is returned.
+   * @return the value for <code>aPropertyName</code> as <code>Calendar</code>.&#xA; If no node or property exists or it isn't compatible with a <code>Calendar</code>, <code>aDefaultValue</code> is returned.
    */
   getCalendar(
-    aNodeIdentifier: string,
-    aPropertyName: string,
-    aDefaultValue: unknown
-  ): unknown;
+    aNodeIdentifier: String | string,
+    aPropertyName: String | string,
+    aDefaultValue: Calendar
+  ): Calendar;
 
   /**
    * Gets a double property from a potential Node in a specific version.
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aPropertyName the name of the property
-   * @return the value for <code>aPropertyName</code> as <code>double</code>. If no node or property exists or it isn't a <code>double</code>, <code>0.0</code> is returned.
+   * @return the value for <code>aPropertyName</code> as <code>double</code>.&#xA; If no node or property exists or it isn't a <code>double</code>, <code>0.0</code> is returned.
    * @since Sitevision 3.5
    */
-  getDouble(aNodeIdentifier: string, aPropertyName: string): number;
+  getDouble(
+    aNodeIdentifier: String | string,
+    aPropertyName: String | string
+  ): number;
 
   /**
    * Gets a double property from a potential Node in a specific version - with a fallback value if the property doesn't exist.
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aPropertyName the name of the property
    * @param aDefaultValue fallback value if no value exists
-   * @return the value for <code>aPropertyName</code> as <code>double</code>. If no node or property exists or it isn't compatible with a <code>double</code>, <code>aDefaultValue</code> is returned.
+   * @return the value for <code>aPropertyName</code> as <code>double</code>.&#xA; If no node or property exists or it isn't compatible with a <code>double</code>, <code>aDefaultValue</code> is returned.
    * @since Sitevision 3.5
    */
   getDouble(
-    aNodeIdentifier: string,
-    aPropertyName: string,
+    aNodeIdentifier: String | string,
+    aPropertyName: String | string,
     aDefaultValue: number
   ): number;
 
   /**
    * Gets a Binary property from a potential Node in a specific version.
    *
-   * <p>
-   *    Ensure to always handle resources appropriately when working with Binary! If you get a stream via {@link javax.jcr.Binary#getStream()},
-   *    you must also <code>close</code> the stream when you are done.
-   * </p>
+   *  <p>
+   *     Ensure to always handle resources appropriately when working with Binary! If you get a stream via {@link javax.jcr.Binary#getStream()},
+   *     you must also <code>close</code> the stream when you are done.
+   *  </p>
    *
-   * <p>
-   *    <strong>Note!</strong> The <code>Binary</code> support is limited, see {@link javax.jcr.Property#getBinary()} for more information!
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> The <code>Binary</code> support is limited, see {@link javax.jcr.Property#getBinary()} for more information!
+   *  </p>
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aPropertyName the name of the property
-   * @return the value for <code>aPropertyName</code> as <code>Binary</code>. If no node or property exists or it isn't a <code>Binary</code>, <code>null</code> is returned.
+   * @return the value for <code>aPropertyName</code> as <code>Binary</code>.&#xA; If no node or property exists or it isn't a <code>Binary</code>, <code>null</code> is returned.
    * @since Sitevision 3.5
    */
-  getBinary(aNodeIdentifier: string, aPropertyName: string): Binary;
+  getBinary(
+    aNodeIdentifier: String | string,
+    aPropertyName: String | string
+  ): Binary;
 
   /**
    * Gets a Binary property from a potential Node in a specific version - with a fallback value if the property doesn't exist.
    *
-   * <p>
-   *    Ensure to always handle resources appropriately when working with Binary! If you get a stream via {@link javax.jcr.Binary#getStream()},
-   *    you must also <code>close</code> the stream when you are done.
-   * </p>
+   *  <p>
+   *     Ensure to always handle resources appropriately when working with Binary! If you get a stream via {@link javax.jcr.Binary#getStream()},
+   *     you must also <code>close</code> the stream when you are done.
+   *  </p>
    *
-   * <p>
-   *    <strong>Note!</strong> The <code>Binary</code> support is limited, see {@link javax.jcr.Property#getBinary()} for more information!
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> The <code>Binary</code> support is limited, see {@link javax.jcr.Property#getBinary()} for more information!
+   *  </p>
    *
-   * <p>
-   *    <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
-   *    Illegal characters in node names and property names must always be escaped,
-   *    typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
-   *    For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
-   *    Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
-   *    (e.g. metadata properties) might contain illegal characters.
-   * </p>
+   *  <p>
+   *     <strong>Note!</strong> This method does <em>not</em> escape names (i.e. <code>aPropertyName</code>).
+   *     Illegal characters in node names and property names must always be escaped,
+   *     typically via {@link senselogic.sitevision.api.text.EndecUtil#escapeJcrName(String)}.
+   *     For best performance - never escape a name if you are certain that it doesn't contain any illegal characters.
+   *     Sitevision model properties never contain illegal characters. Though, depending on configuration "dynamic" ones
+   *     (e.g. metadata properties) might contain illegal characters.
+   *  </p>
    * @param aNodeIdentifier the identifier (see {@link javax.jcr.Node#getIdentifier()}) of a potential <code>Node</code> that has a property
    * @param aPropertyName the name of the property
    * @param aDefaultValue fallback value if no value exists
-   * @return the value for <code>aPropertyName</code> as <code>Binary</code>. f no node or property exists or it isn't compatible with a <code>Binary</code>, <code>aDefaultValue</code> is returned.
+   * @return the value for <code>aPropertyName</code> as <code>Binary</code>.&#xA; f no node or property exists or it isn't compatible with a <code>Binary</code>, <code>aDefaultValue</code> is returned.
    * @since Sitevision 3.5
    */
   getBinary(
-    aNodeIdentifier: string,
-    aPropertyName: string,
+    aNodeIdentifier: String | string,
+    aPropertyName: String | string,
     aDefaultValue: Binary
   ): Binary;
 };