@simplysm/sd-cli 14.0.1 → 14.0.5

package/tests/angular/fixtures/basic-app/node_modules/rxjs/src/internal/operators/connect.ts

@@ -0,0 +1,109 @@
+import { OperatorFunction, ObservableInput, ObservedValueOf, SubjectLike } from '../types';
+import { Observable } from '../Observable';
+import { Subject } from '../Subject';
+import { innerFrom } from '../observable/innerFrom';
+import { operate } from '../util/lift';
+import { fromSubscribable } from '../observable/fromSubscribable';
+
+/**
+ * An object used to configure {@link connect} operator.
+ */
+export interface ConnectConfig<T> {
+  /**
+   * A factory function used to create the Subject through which the source
+   * is multicast. By default, this creates a {@link Subject}.
+   */
+  connector: () => SubjectLike<T>;
+}
+
+/**
+ * The default configuration for `connect`.
+ */
+const DEFAULT_CONFIG: ConnectConfig<unknown> = {
+  connector: () => new Subject<unknown>(),
+};
+
+/**
+ * Creates an observable by multicasting the source within a function that
+ * allows the developer to define the usage of the multicast prior to connection.
+ *
+ * This is particularly useful if the observable source you wish to multicast could
+ * be synchronous or asynchronous. This sets it apart from {@link share}, which, in the
+ * case of totally synchronous sources will fail to share a single subscription with
+ * multiple consumers, as by the time the subscription to the result of {@link share}
+ * has returned, if the source is synchronous its internal reference count will jump from
+ * 0 to 1 back to 0 and reset.
+ *
+ * To use `connect`, you provide a `selector` function that will give you
+ * a multicast observable that is not yet connected. You then use that multicast observable
+ * to create a resulting observable that, when subscribed, will set up your multicast. This is
+ * generally, but not always, accomplished with {@link merge}.
+ *
+ * Note that using a {@link takeUntil} inside of `connect`'s `selector` _might_ mean you were looking
+ * to use the {@link takeWhile} operator instead.
+ *
+ * When you subscribe to the result of `connect`, the `selector` function will be called. After
+ * the `selector` function returns, the observable it returns will be subscribed to, _then_ the
+ * multicast will be connected to the source.
+ *
+ * ## Example
+ *
+ * Sharing a totally synchronous observable
+ *
+ * ```ts
+ * import { of, tap, connect, merge, map, filter } from 'rxjs';
+ *
+ * const source$ = of(1, 2, 3, 4, 5).pipe(
+ *   tap({
+ *     subscribe: () => console.log('subscription started'),
+ *     next: n => console.log(`source emitted ${ n }`)
+ *   })
+ * );
+ *
+ * source$.pipe(
+ *   // Notice in here we're merging 3 subscriptions to `shared$`.
+ *   connect(shared$ => merge(
+ *     shared$.pipe(map(n => `all ${ n }`)),
+ *     shared$.pipe(filter(n => n % 2 === 0), map(n => `even ${ n }`)),
+ *     shared$.pipe(filter(n => n % 2 === 1), map(n => `odd ${ n }`))
+ *   ))
+ * )
+ * .subscribe(console.log);
+ *
+ * // Expected output: (notice only one subscription)
+ * 'subscription started'
+ * 'source emitted 1'
+ * 'all 1'
+ * 'odd 1'
+ * 'source emitted 2'
+ * 'all 2'
+ * 'even 2'
+ * 'source emitted 3'
+ * 'all 3'
+ * 'odd 3'
+ * 'source emitted 4'
+ * 'all 4'
+ * 'even 4'
+ * 'source emitted 5'
+ * 'all 5'
+ * 'odd 5'
+ * ```
+ *
+ * @param selector A function used to set up the multicast. Gives you a multicast observable
+ * that is not yet connected. With that, you're expected to create and return
+ * and Observable, that when subscribed to, will utilize the multicast observable.
+ * After this function is executed -- and its return value subscribed to -- the
+ * operator will subscribe to the source, and the connection will be made.
+ * @param config The configuration object for `connect`.
+ */
+export function connect<T, O extends ObservableInput<unknown>>(
+  selector: (shared: Observable<T>) => O,
+  config: ConnectConfig<T> = DEFAULT_CONFIG
+): OperatorFunction<T, ObservedValueOf<O>> {
+  const { connector } = config;
+  return operate((source, subscriber) => {
+    const subject = connector();
+    innerFrom(selector(fromSubscribable(subject))).subscribe(subscriber);
+    subscriber.add(source.subscribe(subject));
+  });
+}

package/tests/angular/fixtures/basic-app/node_modules/rxjs/src/internal/operators/count.ts

@@ -0,0 +1,61 @@
+import { OperatorFunction } from '../types';
+import { reduce } from './reduce';
+
+/**
+ * Counts the number of emissions on the source and emits that number when the
+ * source completes.
+ *
+ * <span class="informal">Tells how many values were emitted, when the source
+ * completes.</span>
+ *
+ * ![](count.png)
+ *
+ * `count` transforms an Observable that emits values into an Observable that
+ * emits a single value that represents the number of values emitted by the
+ * source Observable. If the source Observable terminates with an error, `count`
+ * will pass this error notification along without emitting a value first. If
+ * the source Observable does not terminate at all, `count` will neither emit
+ * a value nor terminate. This operator takes an optional `predicate` function
+ * as argument, in which case the output emission will represent the number of
+ * source values that matched `true` with the `predicate`.
+ *
+ * ## Examples
+ *
+ * Counts how many seconds have passed before the first click happened
+ *
+ * ```ts
+ * import { interval, fromEvent, takeUntil, count } from 'rxjs';
+ *
+ * const seconds = interval(1000);
+ * const clicks = fromEvent(document, 'click');
+ * const secondsBeforeClick = seconds.pipe(takeUntil(clicks));
+ * const result = secondsBeforeClick.pipe(count());
+ * result.subscribe(x => console.log(x));
+ * ```
+ *
+ * Counts how many odd numbers are there between 1 and 7
+ *
+ * ```ts
+ * import { range, count } from 'rxjs';
+ *
+ * const numbers = range(1, 7);
+ * const result = numbers.pipe(count(i => i % 2 === 1));
+ * result.subscribe(x => console.log(x));
+ * // Results in:
+ * // 4
+ * ```
+ *
+ * @see {@link max}
+ * @see {@link min}
+ * @see {@link reduce}
+ *
+ * @param predicate A function that is used to analyze the value and the index and
+ * determine whether or not to increment the count. Return `true` to increment the count,
+ * and return `false` to keep the count the same.
+ * If the predicate is not provided, every value will be counted.
+ * @return A function that returns an Observable that emits one number that
+ * represents the count of emissions.
+ */
+export function count<T>(predicate?: (value: T, index: number) => boolean): OperatorFunction<T, number> {
+  return reduce((total, value, i) => (!predicate || predicate(value, i) ? total + 1 : total), 0);
+}

package/tests/angular/fixtures/basic-app/node_modules/rxjs/src/internal/operators/debounce.ts

@@ -0,0 +1,119 @@
+import { Subscriber } from '../Subscriber';
+import { MonoTypeOperatorFunction, ObservableInput } from '../types';
+import { operate } from '../util/lift';
+import { noop } from '../util/noop';
+import { createOperatorSubscriber } from './OperatorSubscriber';
+import { innerFrom } from '../observable/innerFrom';
+
+/**
+ * Emits a notification from the source Observable only after a particular time span
+ * determined by another Observable has passed without another source emission.
+ *
+ * <span class="informal">It's like {@link debounceTime}, but the time span of
+ * emission silence is determined by a second Observable.</span>
+ *
+ * ![](debounce.svg)
+ *
+ * `debounce` delays notifications emitted by the source Observable, but drops previous
+ * pending delayed emissions if a new notification arrives on the source Observable.
+ * This operator keeps track of the most recent notification from the source
+ * Observable, and spawns a duration Observable by calling the
+ * `durationSelector` function. The notification is emitted only when the duration
+ * Observable emits a next notification, and if no other notification was emitted on
+ * the source Observable since the duration Observable was spawned. If a new
+ * notification appears before the duration Observable emits, the previous notification will
+ * not be emitted and a new duration is scheduled from `durationSelector` is scheduled.
+ * If the completing event happens during the scheduled duration the last cached notification
+ * is emitted before the completion event is forwarded to the output observable.
+ * If the error event happens during the scheduled duration or after it only the error event is
+ * forwarded to the output observable. The cache notification is not emitted in this case.
+ *
+ * Like {@link debounceTime}, this is a rate-limiting operator, and also a
+ * delay-like operator since output emissions do not necessarily occur at the
+ * same time as they did on the source Observable.
+ *
+ * ## Example
+ *
+ * Emit the most recent click after a burst of clicks
+ *
+ * ```ts
+ * import { fromEvent, scan, debounce, interval } from 'rxjs';
+ *
+ * const clicks = fromEvent(document, 'click');
+ * const result = clicks.pipe(
+ *   scan(i => ++i, 1),
+ *   debounce(i => interval(200 * i))
+ * );
+ * result.subscribe(x => console.log(x));
+ * ```
+ *
+ * @see {@link audit}
+ * @see {@link auditTime}
+ * @see {@link debounceTime}
+ * @see {@link delay}
+ * @see {@link sample}
+ * @see {@link sampleTime}
+ * @see {@link throttle}
+ * @see {@link throttleTime}
+ *
+ * @param durationSelector A function
+ * that receives a value from the source Observable, for computing the timeout
+ * duration for each source value, returned as an Observable or a Promise.
+ * @return A function that returns an Observable that delays the emissions of
+ * the source Observable by the specified duration Observable returned by
+ * `durationSelector`, and may drop some values if they occur too frequently.
+ */
+export function debounce<T>(durationSelector: (value: T) => ObservableInput<any>): MonoTypeOperatorFunction<T> {
+  return operate((source, subscriber) => {
+    let hasValue = false;
+    let lastValue: T | null = null;
+    // The subscriber/subscription for the current debounce, if there is one.
+    let durationSubscriber: Subscriber<any> | null = null;
+
+    const emit = () => {
+      // Unsubscribe any current debounce subscription we have,
+      // we only cared about the first notification from it, and we
+      // want to clean that subscription up as soon as possible.
+      durationSubscriber?.unsubscribe();
+      durationSubscriber = null;
+      if (hasValue) {
+        // We have a value! Free up memory first, then emit the value.
+        hasValue = false;
+        const value = lastValue!;
+        lastValue = null;
+        subscriber.next(value);
+      }
+    };
+
+    source.subscribe(
+      createOperatorSubscriber(
+        subscriber,
+        (value: T) => {
+          // Cancel any pending debounce duration. We don't
+          // need to null it out here yet tho, because we're just going
+          // to create another one in a few lines.
+          durationSubscriber?.unsubscribe();
+          hasValue = true;
+          lastValue = value;
+          // Capture our duration subscriber, so we can unsubscribe it when we're notified
+          // and we're going to emit the value.
+          durationSubscriber = createOperatorSubscriber(subscriber, emit, noop);
+          // Subscribe to the duration.
+          innerFrom(durationSelector(value)).subscribe(durationSubscriber);
+        },
+        () => {
+          // Source completed.
+          // Emit any pending debounced values then complete
+          emit();
+          subscriber.complete();
+        },
+        // Pass all errors through to consumer
+        undefined,
+        () => {
+          // Finalization.
+          lastValue = durationSubscriber = null;
+        }
+      )
+    );
+  });
+}

package/tests/angular/fixtures/basic-app/node_modules/rxjs/src/internal/operators/debounceTime.ts

@@ -0,0 +1,123 @@
+import { asyncScheduler } from '../scheduler/async';
+import { Subscription } from '../Subscription';
+import { MonoTypeOperatorFunction, SchedulerAction, SchedulerLike } from '../types';
+import { operate } from '../util/lift';
+import { createOperatorSubscriber } from './OperatorSubscriber';
+
+/**
+ * Emits a notification from the source Observable only after a particular time span
+ * has passed without another source emission.
+ *
+ * <span class="informal">It's like {@link delay}, but passes only the most
+ * recent notification from each burst of emissions.</span>
+ *
+ * ![](debounceTime.png)
+ *
+ * `debounceTime` delays notifications emitted by the source Observable, but drops
+ * previous pending delayed emissions if a new notification arrives on the source
+ * Observable. This operator keeps track of the most recent notification from the
+ * source Observable, and emits that only when `dueTime` has passed
+ * without any other notification appearing on the source Observable. If a new value
+ * appears before `dueTime` silence occurs, the previous notification will be dropped
+ * and will not be emitted and a new `dueTime` is scheduled.
+ * If the completing event happens during `dueTime` the last cached notification
+ * is emitted before the completion event is forwarded to the output observable.
+ * If the error event happens during `dueTime` or after it only the error event is
+ * forwarded to the output observable. The cache notification is not emitted in this case.
+ *
+ * This is a rate-limiting operator, because it is impossible for more than one
+ * notification to be emitted in any time window of duration `dueTime`, but it is also
+ * a delay-like operator since output emissions do not occur at the same time as
+ * they did on the source Observable. Optionally takes a {@link SchedulerLike} for
+ * managing timers.
+ *
+ * ## Example
+ *
+ * Emit the most recent click after a burst of clicks
+ *
+ * ```ts
+ * import { fromEvent, debounceTime } from 'rxjs';
+ *
+ * const clicks = fromEvent(document, 'click');
+ * const result = clicks.pipe(debounceTime(1000));
+ * result.subscribe(x => console.log(x));
+ * ```
+ *
+ * @see {@link audit}
+ * @see {@link auditTime}
+ * @see {@link debounce}
+ * @see {@link sample}
+ * @see {@link sampleTime}
+ * @see {@link throttle}
+ * @see {@link throttleTime}
+ *
+ * @param dueTime The timeout duration in milliseconds (or the time unit determined
+ * internally by the optional `scheduler`) for the window of time required to wait
+ * for emission silence before emitting the most recent source value.
+ * @param scheduler The {@link SchedulerLike} to use for managing the timers that
+ * handle the timeout for each value.
+ * @return A function that returns an Observable that delays the emissions of
+ * the source Observable by the specified `dueTime`, and may drop some values
+ * if they occur too frequently.
+ */
+export function debounceTime<T>(dueTime: number, scheduler: SchedulerLike = asyncScheduler): MonoTypeOperatorFunction<T> {
+  return operate((source, subscriber) => {
+    let activeTask: Subscription | null = null;
+    let lastValue: T | null = null;
+    let lastTime: number | null = null;
+
+    const emit = () => {
+      if (activeTask) {
+        // We have a value! Free up memory first, then emit the value.
+        activeTask.unsubscribe();
+        activeTask = null;
+        const value = lastValue!;
+        lastValue = null;
+        subscriber.next(value);
+      }
+    };
+    function emitWhenIdle(this: SchedulerAction<unknown>) {
+      // This is called `dueTime` after the first value
+      // but we might have received new values during this window!
+
+      const targetTime = lastTime! + dueTime;
+      const now = scheduler.now();
+      if (now < targetTime) {
+        // On that case, re-schedule to the new target
+        activeTask = this.schedule(undefined, targetTime - now);
+        subscriber.add(activeTask);
+        return;
+      }
+
+      emit();
+    }
+
+    source.subscribe(
+      createOperatorSubscriber(
+        subscriber,
+        (value: T) => {
+          lastValue = value;
+          lastTime = scheduler.now();
+
+          // Only set up a task if it's not already up
+          if (!activeTask) {
+            activeTask = scheduler.schedule(emitWhenIdle, dueTime);
+            subscriber.add(activeTask);
+          }
+        },
+        () => {
+          // Source completed.
+          // Emit any pending debounced values then complete
+          emit();
+          subscriber.complete();
+        },
+        // Pass all errors through to consumer.
+        undefined,
+        () => {
+          // Finalization.
+          lastValue = activeTask = null;
+        }
+      )
+    );
+  });
+}

package/tests/angular/fixtures/basic-app/node_modules/rxjs/src/internal/operators/defaultIfEmpty.ts

@@ -0,0 +1,59 @@
+import { OperatorFunction } from '../types';
+import { operate } from '../util/lift';
+import { createOperatorSubscriber } from './OperatorSubscriber';
+
+/**
+ * Emits a given value if the source Observable completes without emitting any
+ * `next` value, otherwise mirrors the source Observable.
+ *
+ * <span class="informal">If the source Observable turns out to be empty, then
+ * this operator will emit a default value.</span>
+ *
+ * ![](defaultIfEmpty.png)
+ *
+ * `defaultIfEmpty` emits the values emitted by the source Observable or a
+ * specified default value if the source Observable is empty (completes without
+ * having emitted any `next` value).
+ *
+ * ## Example
+ *
+ * If no clicks happen in 5 seconds, then emit 'no clicks'
+ *
+ * ```ts
+ * import { fromEvent, takeUntil, interval, defaultIfEmpty } from 'rxjs';
+ *
+ * const clicks = fromEvent(document, 'click');
+ * const clicksBeforeFive = clicks.pipe(takeUntil(interval(5000)));
+ * const result = clicksBeforeFive.pipe(defaultIfEmpty('no clicks'));
+ * result.subscribe(x => console.log(x));
+ * ```
+ *
+ * @see {@link empty}
+ * @see {@link last}
+ *
+ * @param defaultValue The default value used if the source
+ * Observable is empty.
+ * @return A function that returns an Observable that emits either the
+ * specified `defaultValue` if the source Observable emits no items, or the
+ * values emitted by the source Observable.
+ */
+export function defaultIfEmpty<T, R>(defaultValue: R): OperatorFunction<T, T | R> {
+  return operate((source, subscriber) => {
+    let hasValue = false;
+    source.subscribe(
+      createOperatorSubscriber(
+        subscriber,
+        (value) => {
+          hasValue = true;
+          subscriber.next(value);
+        },
+        () => {
+          if (!hasValue) {
+            subscriber.next(defaultValue!);
+          }
+          subscriber.complete();
+        }
+      )
+    );
+  });
+}

package/tests/angular/fixtures/basic-app/node_modules/rxjs/src/internal/operators/delay.ts

@@ -0,0 +1,65 @@
+import { asyncScheduler } from '../scheduler/async';
+import { MonoTypeOperatorFunction, SchedulerLike } from '../types';
+import { delayWhen } from './delayWhen';
+import { timer } from '../observable/timer';
+
+/**
+ * Delays the emission of items from the source Observable by a given timeout or
+ * until a given Date.
+ *
+ * <span class="informal">Time shifts each item by some specified amount of
+ * milliseconds.</span>
+ *
+ * ![](delay.svg)
+ *
+ * If the delay argument is a Number, this operator time shifts the source
+ * Observable by that amount of time expressed in milliseconds. The relative
+ * time intervals between the values are preserved.
+ *
+ * If the delay argument is a Date, this operator time shifts the start of the
+ * Observable execution until the given date occurs.
+ *
+ * ## Examples
+ *
+ * Delay each click by one second
+ *
+ * ```ts
+ * import { fromEvent, delay } from 'rxjs';
+ *
+ * const clicks = fromEvent(document, 'click');
+ * const delayedClicks = clicks.pipe(delay(1000)); // each click emitted after 1 second
+ * delayedClicks.subscribe(x => console.log(x));
+ * ```
+ *
+ * Delay all clicks until a future date happens
+ *
+ * ```ts
+ * import { fromEvent, delay } from 'rxjs';
+ *
+ * const clicks = fromEvent(document, 'click');
+ * const date = new Date('March 15, 2050 12:00:00'); // in the future
+ * const delayedClicks = clicks.pipe(delay(date)); // click emitted only after that date
+ * delayedClicks.subscribe(x => console.log(x));
+ * ```
+ *
+ * @see {@link delayWhen}
+ * @see {@link throttle}
+ * @see {@link throttleTime}
+ * @see {@link debounce}
+ * @see {@link debounceTime}
+ * @see {@link sample}
+ * @see {@link sampleTime}
+ * @see {@link audit}
+ * @see {@link auditTime}
+ *
+ * @param due The delay duration in milliseconds (a `number`) or a `Date` until
+ * which the emission of the source items is delayed.
+ * @param scheduler The {@link SchedulerLike} to use for managing the timers
+ * that handle the time-shift for each item.
+ * @return A function that returns an Observable that delays the emissions of
+ * the source Observable by the specified timeout or Date.
+ */
+export function delay<T>(due: number | Date, scheduler: SchedulerLike = asyncScheduler): MonoTypeOperatorFunction<T> {
+  const duration = timer(due, scheduler);
+  return delayWhen(() => duration);
+}

package/tests/angular/fixtures/basic-app/node_modules/rxjs/src/internal/operators/delayWhen.ts

@@ -0,0 +1,103 @@
+import { Observable } from '../Observable';
+import { MonoTypeOperatorFunction, ObservableInput } from '../types';
+import { concat } from '../observable/concat';
+import { take } from './take';
+import { ignoreElements } from './ignoreElements';
+import { mapTo } from './mapTo';
+import { mergeMap } from './mergeMap';
+import { innerFrom } from '../observable/innerFrom';
+
+/** @deprecated The `subscriptionDelay` parameter will be removed in v8. */
+export function delayWhen<T>(
+  delayDurationSelector: (value: T, index: number) => ObservableInput<any>,
+  subscriptionDelay: Observable<any>
+): MonoTypeOperatorFunction<T>;
+export function delayWhen<T>(delayDurationSelector: (value: T, index: number) => ObservableInput<any>): MonoTypeOperatorFunction<T>;
+
+/**
+ * Delays the emission of items from the source Observable by a given time span
+ * determined by the emissions of another Observable.
+ *
+ * <span class="informal">It's like {@link delay}, but the time span of the
+ * delay duration is determined by a second Observable.</span>
+ *
+ * ![](delayWhen.png)
+ *
+ * `delayWhen` operator shifts each emitted value from the source Observable by
+ * a time span determined by another Observable. When the source emits a value,
+ * the `delayDurationSelector` function is called with the value emitted from
+ * the source Observable as the first argument to the `delayDurationSelector`.
+ * The `delayDurationSelector` function should return an {@link ObservableInput},
+ * that is internally converted to an Observable that is called the "duration"
+ * Observable.
+ *
+ * The source value is emitted on the output Observable only when the "duration"
+ * Observable emits ({@link guide/glossary-and-semantics#next next}s) any value.
+ * Upon that, the "duration" Observable gets unsubscribed.
+ *
+ * Before RxJS V7, the {@link guide/glossary-and-semantics#complete completion}
+ * of the "duration" Observable would have been triggering the emission of the
+ * source value to the output Observable, but with RxJS V7, this is not the case
+ * anymore.
+ *
+ * Only next notifications (from the "duration" Observable) trigger values from
+ * the source Observable to be passed to the output Observable. If the "duration"
+ * Observable only emits the complete notification (without next), the value
+ * emitted by the source Observable will never get to the output Observable - it
+ * will be swallowed. If the "duration" Observable errors, the error will be
+ * propagated to the output Observable.
+ *
+ * Optionally, `delayWhen` takes a second argument, `subscriptionDelay`, which
+ * is an Observable. When `subscriptionDelay` emits its first value or
+ * completes, the source Observable is subscribed to and starts behaving like
+ * described in the previous paragraph. If `subscriptionDelay` is not provided,
+ * `delayWhen` will subscribe to the source Observable as soon as the output
+ * Observable is subscribed.
+ *
+ * ## Example
+ *
+ * Delay each click by a random amount of time, between 0 and 5 seconds
+ *
+ * ```ts
+ * import { fromEvent, delayWhen, interval } from 'rxjs';
+ *
+ * const clicks = fromEvent(document, 'click');
+ * const delayedClicks = clicks.pipe(
+ *   delayWhen(() => interval(Math.random() * 5000))
+ * );
+ * delayedClicks.subscribe(x => console.log(x));
+ * ```
+ *
+ * @see {@link delay}
+ * @see {@link throttle}
+ * @see {@link throttleTime}
+ * @see {@link debounce}
+ * @see {@link debounceTime}
+ * @see {@link sample}
+ * @see {@link sampleTime}
+ * @see {@link audit}
+ * @see {@link auditTime}
+ *
+ * @param delayDurationSelector A function that returns an `ObservableInput` for
+ * each `value` emitted by the source Observable, which is then used to delay the
+ * emission of that `value` on the output Observable until the `ObservableInput`
+ * returned from this function emits a next value. When called, beside `value`,
+ * this function receives a zero-based `index` of the emission order.
+ * @param subscriptionDelay An Observable that triggers the subscription to the
+ * source Observable once it emits any value.
+ * @return A function that returns an Observable that delays the emissions of
+ * the source Observable by an amount of time specified by the Observable
+ * returned by `delayDurationSelector`.
+ */
+export function delayWhen<T>(
+  delayDurationSelector: (value: T, index: number) => ObservableInput<any>,
+  subscriptionDelay?: Observable<any>
+): MonoTypeOperatorFunction<T> {
+  if (subscriptionDelay) {
+    // DEPRECATED PATH
+    return (source: Observable<T>) =>
+      concat(subscriptionDelay.pipe(take(1), ignoreElements()), source.pipe(delayWhen(delayDurationSelector)));
+  }
+
+  return mergeMap((value, index) => innerFrom(delayDurationSelector(value, index)).pipe(take(1), mapTo(value)));
+}