@shopify/react-native-skia 0.1.128 → 0.1.131

package/lib/commonjs/skia/types/Image/ImageFactory.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":["ImageFactory.ts"],"names":["AlphaType","ColorType"],"mappings":";;;;;;;AAAA;IAKYA,S;;;WAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;GAAAA,S,yBAAAA,S;;IAOAC,S;;;WAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;GAAAA,S,yBAAAA,S","sourcesContent":["/* eslint-disable camelcase */\nimport type { SkData } from \"../Data\";\n\nimport type { SkImage } from \"./Image\";\n\nexport enum AlphaType {\n  Unknown,\n  Opaque,\n  Premul,\n  Unpremul,\n}\n\nexport enum ColorType {\n  Unknown, //!< uninitialized\n  Alpha_8, //!< pixel with alpha in 8-bit byte\n  RGB_565, //!< pixel with 5 bits red, 6 bits green, 5 bits blue, in 16-bit word\n  ARGB_4444, //!< pixel with 4 bits for alpha, red, green, blue; in 16-bit word\n  RGBA_8888, //!< pixel with 8 bits for red, green, blue, alpha; in 32-bit word\n  RGB_888x, //!< pixel with 8 bits each for red, green, blue; in 32-bit word\n  BGRA_8888, //!< pixel with 8 bits for blue, green, red, alpha; in 32-bit word\n  RGBA_1010102, //!< 10 bits for red, green, blue; 2 bits for alpha; in 32-bit word\n  BGRA_1010102, //!< 10 bits for blue, green, red; 2 bits for alpha; in 32-bit word\n  RGB_101010x, //!< pixel with 10 bits each for red, green, blue; in 32-bit word\n  BGR_101010x, //!< pixel with 10 bits each for blue, green, red; in 32-bit word\n  Gray_8, //!< pixel with grayscale level in 8-bit byte\n  RGBA_F16Norm, //!< pixel with half floats in [0,1] for red, green, blue, alpha;\n  //   in 64-bit word\n  RGBA_F16, //!< pixel with half floats for red, green, blue, alpha;\n  //   in 64-bit word\n  RGBA_F32, //!< pixel using C float for red, green, blue, alpha; in 128-bit word\n\n  // The following 6 colortypes are just for reading from - not for rendering to\n  R8G8_unorm, //!< pixel with a uint8_t for red and green\n\n  A16_float, //!< pixel with a half float for alpha\n  R16G16_float, //!< pixel with a half float for red and green\n\n  A16_unorm, //!< pixel with a little endian uint16_t for alpha\n  R16G16_unorm, //!< pixel with a little endian uint16_t for red and green\n  R16G16B16A16_unorm, //!< pixel with a little endian uint16_t for red, green, blue\n  //   and alpha\n  SRGBA_8888,\n}\n\nexport interface ImageInfo {\n  alphaType: AlphaType;\n  // TODO: add support for color space\n  // colorSpace: ColorSpace;\n  colorType: ColorType;\n  height: number;\n  width: number;\n}\n\nexport interface ImageFactory {\n  /**\n   * Return an Image backed by the encoded data, but attempt to defer decoding until the image\n   * is actually used/drawn. This deferral allows the system to cache the result, either on the\n   * CPU or on the GPU, depending on where the image is drawn.\n   * This decoding uses the codecs that have been compiled into CanvasKit. If the bytes are\n   * invalid (or an unrecognized codec), null will be returned. See Image.h for more details.\n   * @param data - Data object with bytes of data\n   * @returns If the encoded format is not supported, or subset is outside of the bounds of the decoded\n   *  image, nullptr is returned.\n   */\n  MakeImageFromEncoded: (encoded: SkData) => SkImage | null;\n\n  /**\n   * Returns an image with the given pixel data and format.\n   * Note that we will always make a copy of the pixel data, because of inconsistencies in\n   * behavior between GPU and CPU (i.e. the pixel data will be turned into a GPU texture and\n   * not modifiable after creation).\n   *\n   * @param info\n   * @param data - bytes representing the pixel data.\n   * @param bytesPerRow\n   */\n  MakeImage(info: ImageInfo, data: SkData, bytesPerRow: number): SkImage | null;\n}\n"]}

package/lib/commonjs/skia/types/Image/index.js

@@ -0,0 +1,32 @@
+"use strict";
+
+Object.defineProperty(exports, "__esModule", {
+  value: true
+});
+
+var _Image = require("./Image");
+
+Object.keys(_Image).forEach(function (key) {
+  if (key === "default" || key === "__esModule") return;
+  if (key in exports && exports[key] === _Image[key]) return;
+  Object.defineProperty(exports, key, {
+    enumerable: true,
+    get: function () {
+      return _Image[key];
+    }
+  });
+});
+
+var _ImageFactory = require("./ImageFactory");
+
+Object.keys(_ImageFactory).forEach(function (key) {
+  if (key === "default" || key === "__esModule") return;
+  if (key in exports && exports[key] === _ImageFactory[key]) return;
+  Object.defineProperty(exports, key, {
+    enumerable: true,
+    get: function () {
+      return _ImageFactory[key];
+    }
+  });
+});
+//# sourceMappingURL=index.js.map

package/lib/commonjs/skia/types/Image/index.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":["index.ts"],"names":[],"mappings":";;;;;;AAAA;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;;AACA;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA","sourcesContent":["export * from \"./Image\";\nexport * from \"./ImageFactory\";\n"]}

package/lib/commonjs/skia/types/ImageFilter/ImageFilterFactory.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":["ImageFilterFactory.ts"],"names":["ColorChannel"],"mappings":";;;;;;IASYA,Y;;;WAAAA,Y;AAAAA,EAAAA,Y,CAAAA,Y;AAAAA,EAAAA,Y,CAAAA,Y;AAAAA,EAAAA,Y,CAAAA,Y;AAAAA,EAAAA,Y,CAAAA,Y;GAAAA,Y,4BAAAA,Y","sourcesContent":["import type { SkColor } from \"../Color\";\nimport type { SkColorFilter } from \"../ColorFilter/ColorFilter\";\nimport type { BlendMode } from \"../Paint\";\nimport type { SkRect } from \"../Rect\";\nimport type { SkRuntimeShaderBuilder } from \"../RuntimeEffect\";\nimport type { SkShader } from \"../Shader\";\n\nimport type { SkImageFilter, TileMode } from \"./ImageFilter\";\n\nexport enum ColorChannel {\n  R,\n  G,\n  B,\n  A,\n}\n\nexport interface ImageFilterFactory {\n  /**\n   * Offsets the input image\n   *\n   * @param dx - Offset along the X axis\n   * @param dy - Offset along the X axis\n   * @param input - if null, it will use the dynamic source image\n   */\n  MakeOffset(\n    dx: number,\n    dy: number,\n    input: SkImageFilter | null\n  ): SkImageFilter;\n  /**\n   * Spatially displace pixel values of the filtered image\n   *\n   * @param channelX - Color channel to be used along the X axis\n   * @param channelY - Color channel to be used along the Y axis\n   * @param scale - Scale factor to be used in the displacement\n   * @param in1 - Source image filter to use for the displacement\n   * @param input - if null, it will use the dynamic source image\n   */\n  MakeDisplacementMap(\n    channelX: ColorChannel,\n    channelY: ColorChannel,\n    scale: number,\n    in1: SkImageFilter,\n    input: SkImageFilter | null\n  ): SkImageFilter;\n  /**\n   * Transforms a shader into an impage filter\n   *\n   * @param shader - The Shader to be transformed\n   * @param input - if null, it will use the dynamic source image\n   */\n  MakeShader(shader: SkShader, input: SkImageFilter | null): SkImageFilter;\n  /**\n   * Create a filter that blurs its input by the separate X and Y sigmas. The provided tile mode\n   * is used when the blur kernel goes outside the input image.\n   *\n   * @param sigmaX - The Gaussian sigma value for blurring along the X axis.\n   * @param sigmaY - The Gaussian sigma value for blurring along the Y axis.\n   * @param mode\n   * @param input - if null, it will use the dynamic source image (e.g. a saved layer)\n   */\n  MakeBlur(\n    sigmaX: number,\n    sigmaY: number,\n    mode: TileMode,\n    input: SkImageFilter | null\n  ): SkImageFilter;\n\n  /**\n   * Create a filter that applies the color filter to the input filter results.\n   * @param cf\n   * @param input - if null, it will use the dynamic source image (e.g. a saved layer)\n   */\n  MakeColorFilter(\n    cf: SkColorFilter,\n    input: SkImageFilter | null\n  ): SkImageFilter;\n\n  /**\n   * Create a filter that composes 'inner' with 'outer', such that the results of 'inner' are\n   * treated as the source bitmap passed to 'outer'.\n   * If either param is null, the other param will be returned.\n   * @param outer\n   * @param inner - if null, it will use the dynamic source image (e.g. a saved layer)\n   */\n  MakeCompose(\n    outer: SkImageFilter | null,\n    inner: SkImageFilter | null\n  ): SkImageFilter;\n\n  /**\n   * Create a filter that draws a drop shadow under the input content.\n   * This filter produces an image that includes the inputs' content.\n   * @param dx The X offset of the shadow.\n   * @param dy\tThe Y offset of the shadow.\n   * @param sigmaX\tThe blur radius for the shadow, along the X axis.\n   * @param sigmaY\tThe blur radius for the shadow, along the Y axis.\n   * @param color\tThe color of the drop shadow.\n   * @param input\tThe input filter, or will use the source bitmap if this is null.\n   * @param cropRect\tOptional rectangle that crops the input and output.\n   */\n  MakeDropShadow: (\n    dx: number,\n    dy: number,\n    sigmaX: number,\n    sigmaY: number,\n    color: SkColor,\n    input: SkImageFilter | null,\n    cropRect?: SkRect\n  ) => SkImageFilter;\n  /**\n   * Create a filter that renders a drop shadow, in exactly the same manner as ::DropShadow, except\n   * that the resulting image does not include the input content.\n   * This allows the shadow and input to be composed by a filter DAG in a more flexible manner.\n   * @param dx The X offset of the shadow.\n   * @param dy\tThe Y offset of the shadow.\n   * @param sigmaX\tThe blur radius for the shadow, along the X axis.\n   * @param sigmaY\tThe blur radius for the shadow, along the Y axis.\n   * @param color\tThe color of the drop shadow.\n   * @param input\tThe input filter, or will use the source bitmap if this is null.\n   * @param cropRect\tOptional rectangle that crops the input and output.\n   */\n  MakeDropShadowOnly: (\n    dx: number,\n    dy: number,\n    sigmaX: number,\n    sigmaY: number,\n    color: SkColor,\n    input: SkImageFilter | null,\n    cropRect?: SkRect\n  ) => SkImageFilter;\n  /**\n   *  Create a filter that erodes each input pixel's channel values to the minimum channel value\n   *  within the given radii along the x and y axes.\n   *  @param radiusX  The distance to erode along the x axis to either side of each pixel.\n   *  @param radiusY  The distance to erode along the y axis to either side of each pixel.\n   *  @param input    The image filter that is eroded, using source bitmap if this is null.\n   *  @param cropRect Optional rectangle that crops the input and output.\n   */\n  MakeErode: (\n    rx: number,\n    ry: number,\n    input: SkImageFilter | null,\n    cropRect?: SkRect\n  ) => SkImageFilter;\n  /**\n   *  Create a filter that dilates each input pixel's channel values to the max value within the\n   *  given radii along the x and y axes.\n   *  @param radiusX  The distance to dilate along the x axis to either side of each pixel.\n   *  @param radiusY  The distance to dilate along the y axis to either side of each pixel.\n   *  @param input    The image filter that is dilated, using source bitmap if this is null.\n   *  @param cropRect Optional rectangle that crops the input and output.\n   */\n  MakeDilate: (\n    rx: number,\n    ry: number,\n    input: SkImageFilter | null,\n    cropRect?: SkRect\n  ) => SkImageFilter;\n  /**\n   *  This filter takes an SkBlendMode and uses it to composite the two filters together.\n   *  @param mode       The blend mode that defines the compositing operation\n   *  @param background The Dst pixels used in blending, if null the source bitmap is used.\n   *  @param foreground The Src pixels used in blending, if null the source bitmap is used.\n   *  @cropRect         Optional rectangle to crop input and output.\n   */\n  MakeBlend: (\n    mode: BlendMode,\n    background: SkImageFilter,\n    foreground: SkImageFilter | null,\n    cropRect?: SkRect\n  ) => SkImageFilter;\n  /**\n   *  Create a filter that fills the output with the per-pixel evaluation of the SkShader produced\n   *  by the SkRuntimeShaderBuilder. The shader is defined in the image filter's local coordinate\n   *  system, so it will automatically be affected by SkCanvas' transform.\n   *\n   *  @param builder         The builder used to produce the runtime shader, that will in turn\n   *                         fill the result image\n   *  @param childShaderName The name of the child shader defined in the builder that will be\n   *                         bound to the input param (or the source image if the input param\n   *                         is null).  If null the builder can have exactly one child shader,\n   *                         which automatically binds the input param.\n   *  @param input           The image filter that will be provided as input to the runtime\n   *                         shader. If null the implicit source image is used instead\n   */\n  MakeRuntimeShader: (\n    builder: SkRuntimeShaderBuilder,\n    childShaderName: string | null,\n    input: SkImageFilter | null\n  ) => SkImageFilter;\n}\n"]}

package/lib/commonjs/skia/types/MaskFilter.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":["MaskFilter.ts"],"names":["BlurStyle","isMaskFilter","obj","__typename__"],"mappings":";;;;;;IAEYA,S;;;WAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;GAAAA,S,yBAAAA,S;;AAOL,MAAMC,YAAY,GACvBC,GAD0B,IAEFA,GAAG,KAAK,IAAR,IAAgBA,GAAG,CAACC,YAAJ,KAAqB,YAFxD","sourcesContent":["import type { SkJSIInstance } from \"./JsiInstance\";\n\nexport enum BlurStyle {\n  Normal, //!< fuzzy inside and outside\n  Solid, //!< solid inside, fuzzy outside\n  Outer, //!< nothing inside, fuzzy outside\n  Inner, //!< fuzzy inside, nothing outside\n}\n\nexport const isMaskFilter = (\n  obj: SkJSIInstance<string> | null\n): obj is SkMaskFilter => obj !== null && obj.__typename__ === \"MaskFilter\";\n\nexport type SkMaskFilter = SkJSIInstance<\"MaskFilter\">;\n\n/**\n * See SkMaskFilter.h for more details.\n */\nexport interface MaskFilterFactory {\n  /**\n   * Create a blur maskfilter\n   * @param style\n   * @param sigma - Standard deviation of the Gaussian blur to apply. Must be > 0.\n   * @param respectCTM - if true the blur's sigma is modified by the CTM.\n   */\n  MakeBlur(style: BlurStyle, sigma: number, respectCTM: boolean): SkMaskFilter;\n}\n"]}

package/lib/commonjs/skia/types/Matrix.js

@@ -0,0 +1,78 @@
+"use strict";
+
+Object.defineProperty(exports, "__esModule", {
+  value: true
+});
+exports.processTransform = exports.MatrixIndex = void 0;
+let MatrixIndex;
+exports.MatrixIndex = MatrixIndex;
+
+(function (MatrixIndex) {
+  MatrixIndex[MatrixIndex["ScaleX"] = 0] = "ScaleX";
+  MatrixIndex[MatrixIndex["SkewX"] = 1] = "SkewX";
+  MatrixIndex[MatrixIndex["TransX"] = 2] = "TransX";
+  MatrixIndex[MatrixIndex["SkewY"] = 3] = "SkewY";
+  MatrixIndex[MatrixIndex["ScaleY"] = 4] = "ScaleY";
+  MatrixIndex[MatrixIndex["TransY"] = 5] = "TransY";
+  MatrixIndex[MatrixIndex["Persp0"] = 6] = "Persp0";
+  MatrixIndex[MatrixIndex["Persp1"] = 7] = "Persp1";
+  MatrixIndex[MatrixIndex["persp2"] = 8] = "persp2";
+})(MatrixIndex || (exports.MatrixIndex = MatrixIndex = {}));
+
+const processTransform = (m, transforms) => {
+  for (const transform of transforms) {
+    const key = Object.keys(transform)[0];
+    const value = transform[key];
+
+    if (key === "translateX") {
+      m.translate(value, 0);
+      continue;
+    }
+
+    if (key === "translateY") {
+      m.translate(0, value);
+      continue;
+    }
+
+    if (key === "scale") {
+      m.scale(value, value);
+      continue;
+    }
+
+    if (key === "scaleX") {
+      m.scale(value, 1);
+      continue;
+    }
+
+    if (key === "scaleY") {
+      m.scale(1, value);
+      continue;
+    }
+
+    if (key === "skewX") {
+      m.skew(value, 0);
+      continue;
+    }
+
+    if (key === "skewY") {
+      m.skew(0, value);
+      continue;
+    }
+
+    if (key === "rotate" || key === "rotateZ") {
+      m.rotate(value);
+      continue;
+    }
+
+    exhaustiveCheck(key);
+  }
+
+  return m;
+};
+
+exports.processTransform = processTransform;
+
+const exhaustiveCheck = a => {
+  throw new Error(`Unknown transformation: ${a}`);
+};
+//# sourceMappingURL=Matrix.js.map

package/lib/commonjs/skia/types/Matrix.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":["Matrix.ts"],"names":["MatrixIndex","processTransform","m","transforms","transform","key","Object","keys","value","translate","scale","skew","rotate","exhaustiveCheck","a","Error"],"mappings":";;;;;;IACYA,W;;;WAAAA,W;AAAAA,EAAAA,W,CAAAA,W;AAAAA,EAAAA,W,CAAAA,W;AAAAA,EAAAA,W,CAAAA,W;AAAAA,EAAAA,W,CAAAA,W;AAAAA,EAAAA,W,CAAAA,W;AAAAA,EAAAA,W,CAAAA,W;AAAAA,EAAAA,W,CAAAA,W;AAAAA,EAAAA,W,CAAAA,W;AAAAA,EAAAA,W,CAAAA,W;GAAAA,W,2BAAAA,W;;AAkDL,MAAMC,gBAAgB,GAAG,CAACC,CAAD,EAAcC,UAAd,KAA2C;AACzE,OAAK,MAAMC,SAAX,IAAwBD,UAAxB,EAAoC;AAClC,UAAME,GAAG,GAAGC,MAAM,CAACC,IAAP,CAAYH,SAAZ,EAAuB,CAAvB,CAAZ;AACA,UAAMI,KAAK,GAAIJ,SAAD,CAAiDC,GAAjD,CAAd;;AACA,QAAIA,GAAG,KAAK,YAAZ,EAA0B;AACxBH,MAAAA,CAAC,CAACO,SAAF,CAAYD,KAAZ,EAAmB,CAAnB;AACA;AACD;;AACD,QAAIH,GAAG,KAAK,YAAZ,EAA0B;AACxBH,MAAAA,CAAC,CAACO,SAAF,CAAY,CAAZ,EAAeD,KAAf;AACA;AACD;;AACD,QAAIH,GAAG,KAAK,OAAZ,EAAqB;AACnBH,MAAAA,CAAC,CAACQ,KAAF,CAAQF,KAAR,EAAeA,KAAf;AACA;AACD;;AACD,QAAIH,GAAG,KAAK,QAAZ,EAAsB;AACpBH,MAAAA,CAAC,CAACQ,KAAF,CAAQF,KAAR,EAAe,CAAf;AACA;AACD;;AACD,QAAIH,GAAG,KAAK,QAAZ,EAAsB;AACpBH,MAAAA,CAAC,CAACQ,KAAF,CAAQ,CAAR,EAAWF,KAAX;AACA;AACD;;AACD,QAAIH,GAAG,KAAK,OAAZ,EAAqB;AACnBH,MAAAA,CAAC,CAACS,IAAF,CAAOH,KAAP,EAAc,CAAd;AACA;AACD;;AACD,QAAIH,GAAG,KAAK,OAAZ,EAAqB;AACnBH,MAAAA,CAAC,CAACS,IAAF,CAAO,CAAP,EAAUH,KAAV;AACA;AACD;;AACD,QAAIH,GAAG,KAAK,QAAR,IAAoBA,GAAG,KAAK,SAAhC,EAA2C;AACzCH,MAAAA,CAAC,CAACU,MAAF,CAASJ,KAAT;AACA;AACD;;AACDK,IAAAA,eAAe,CAACR,GAAD,CAAf;AACD;;AACD,SAAOH,CAAP;AACD,CAvCM;;;;AAyCP,MAAMW,eAAe,GAAIC,CAAD,IAAqB;AAC3C,QAAM,IAAIC,KAAJ,CAAW,2BAA0BD,CAAE,EAAvC,CAAN;AACD,CAFD","sourcesContent":["import type { SkJSIInstance } from \"./JsiInstance\";\nexport enum MatrixIndex {\n  ScaleX = 0,\n  SkewX = 1,\n  TransX = 2,\n  SkewY = 3,\n  ScaleY = 4,\n  TransY = 5,\n  Persp0 = 6,\n  Persp1 = 7,\n  persp2 = 8,\n}\n\nexport interface SkMatrix extends SkJSIInstance<\"Matrix\"> {\n  concat: (matrix: SkMatrix) => void;\n  translate: (x: number, y: number) => void;\n  scale: (x: number, y?: number) => void;\n  skew: (x: number, y: number) => void;\n  rotate: (theta: number) => void;\n}\n\ntype Transform2dName =\n  | \"translateX\"\n  | \"translateY\"\n  | \"scale\"\n  | \"skewX\"\n  | \"skewY\"\n  | \"scaleX\"\n  | \"scaleY\"\n  | \"rotateZ\"\n  | \"rotate\";\n\ntype Transformations = {\n  readonly [Name in Transform2dName]: number;\n};\n\nexport type Transforms2d = readonly (\n  | Pick<Transformations, \"translateX\">\n  | Pick<Transformations, \"translateY\">\n  | Pick<Transformations, \"scale\">\n  | Pick<Transformations, \"scaleX\">\n  | Pick<Transformations, \"scaleY\">\n  | Pick<Transformations, \"skewX\">\n  | Pick<Transformations, \"skewY\">\n  | Pick<Transformations, \"rotate\">\n)[];\n\nexport interface TransformProp {\n  transform?: Transforms2d;\n}\n\nexport const processTransform = (m: SkMatrix, transforms: Transforms2d) => {\n  for (const transform of transforms) {\n    const key = Object.keys(transform)[0] as Transform2dName;\n    const value = (transform as Pick<Transformations, typeof key>)[key];\n    if (key === \"translateX\") {\n      m.translate(value, 0);\n      continue;\n    }\n    if (key === \"translateY\") {\n      m.translate(0, value);\n      continue;\n    }\n    if (key === \"scale\") {\n      m.scale(value, value);\n      continue;\n    }\n    if (key === \"scaleX\") {\n      m.scale(value, 1);\n      continue;\n    }\n    if (key === \"scaleY\") {\n      m.scale(1, value);\n      continue;\n    }\n    if (key === \"skewX\") {\n      m.skew(value, 0);\n      continue;\n    }\n    if (key === \"skewY\") {\n      m.skew(0, value);\n      continue;\n    }\n    if (key === \"rotate\" || key === \"rotateZ\") {\n      m.rotate(value);\n      continue;\n    }\n    exhaustiveCheck(key);\n  }\n  return m;\n};\n\nconst exhaustiveCheck = (a: never): never => {\n  throw new Error(`Unknown transformation: ${a}`);\n};\n"]}

package/lib/commonjs/skia/types/Paint/Paint.js

@@ -0,0 +1,36 @@
+"use strict";
+
+Object.defineProperty(exports, "__esModule", {
+  value: true
+});
+exports.isPaint = exports.StrokeJoin = exports.StrokeCap = exports.PaintStyle = void 0;
+let PaintStyle;
+exports.PaintStyle = PaintStyle;
+
+(function (PaintStyle) {
+  PaintStyle[PaintStyle["Fill"] = 0] = "Fill";
+  PaintStyle[PaintStyle["Stroke"] = 1] = "Stroke";
+})(PaintStyle || (exports.PaintStyle = PaintStyle = {}));
+
+let StrokeCap;
+exports.StrokeCap = StrokeCap;
+
+(function (StrokeCap) {
+  StrokeCap[StrokeCap["Butt"] = 0] = "Butt";
+  StrokeCap[StrokeCap["Round"] = 1] = "Round";
+  StrokeCap[StrokeCap["Square"] = 2] = "Square";
+})(StrokeCap || (exports.StrokeCap = StrokeCap = {}));
+
+let StrokeJoin;
+exports.StrokeJoin = StrokeJoin;
+
+(function (StrokeJoin) {
+  StrokeJoin[StrokeJoin["Bevel"] = 0] = "Bevel";
+  StrokeJoin[StrokeJoin["Miter"] = 1] = "Miter";
+  StrokeJoin[StrokeJoin["Round"] = 2] = "Round";
+})(StrokeJoin || (exports.StrokeJoin = StrokeJoin = {}));
+
+const isPaint = obj => obj !== null && obj.__typename__ === "Paint";
+
+exports.isPaint = isPaint;
+//# sourceMappingURL=Paint.js.map

package/lib/commonjs/skia/types/Paint/Paint.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":["Paint.ts"],"names":["PaintStyle","StrokeCap","StrokeJoin","isPaint","obj","__typename__"],"mappings":";;;;;;IAUYA,U;;;WAAAA,U;AAAAA,EAAAA,U,CAAAA,U;AAAAA,EAAAA,U,CAAAA,U;GAAAA,U,0BAAAA,U;;IAKAC,S;;;WAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;GAAAA,S,yBAAAA,S;;IAMAC,U;;;WAAAA,U;AAAAA,EAAAA,U,CAAAA,U;AAAAA,EAAAA,U,CAAAA,U;AAAAA,EAAAA,U,CAAAA,U;GAAAA,U,0BAAAA,U;;AAML,MAAMC,OAAO,GAAIC,GAAD,IACrBA,GAAG,KAAK,IAAR,IAAgBA,GAAG,CAACC,YAAJ,KAAqB,OADhC","sourcesContent":["import type { SkImageFilter } from \"../ImageFilter\";\nimport type { SkMaskFilter } from \"../MaskFilter\";\nimport type { SkColorFilter } from \"../ColorFilter\";\nimport type { SkColor } from \"../Color\";\nimport type { SkPathEffect } from \"../PathEffect\";\nimport type { SkJSIInstance } from \"../JsiInstance\";\nimport type { SkShader } from \"../Shader\";\n\nimport type { BlendMode } from \"./BlendMode\";\n\nexport enum PaintStyle {\n  Fill,\n  Stroke,\n}\n\nexport enum StrokeCap {\n  Butt,\n  Round,\n  Square,\n}\n\nexport enum StrokeJoin {\n  Bevel,\n  Miter,\n  Round,\n}\n\nexport const isPaint = (obj: SkJSIInstance<string> | null): obj is SkPaint =>\n  obj !== null && obj.__typename__ === \"Paint\";\n\nexport interface SkPaint extends SkJSIInstance<\"Paint\"> {\n  /**\n   * Returns a copy of this paint.\n   */\n  copy(): SkPaint;\n\n  /**\n   * Retrieves the alpha and RGB unpremultiplied. RGB are extended sRGB values\n   * (sRGB gamut, and encoded with the sRGB transfer function).\n   */\n  getColor(): SkColor;\n\n  /**\n   * Returns the geometry drawn at the beginning and end of strokes.\n   */\n  getStrokeCap(): StrokeCap;\n\n  /**\n   * Returns the geometry drawn at the corners of strokes.\n   */\n  getStrokeJoin(): StrokeJoin;\n\n  /**\n   *  Returns the limit at which a sharp corner is drawn beveled.\n   */\n  getStrokeMiter(): number;\n\n  /**\n   * Returns the thickness of the pen used to outline the shape.\n   */\n  getStrokeWidth(): number;\n\n  /**\n   * Replaces alpha, leaving RGBA unchanged. 0 means fully transparent, 1.0 means opaque.\n   * @param alpha\n   */\n  setAlphaf(alpha: number): void;\n\n  /**\n   * Requests, but does not require, that edge pixels draw opaque or with\n   * partial transparency.\n   * @param aa\n   */\n  setAntiAlias: (aa: boolean) => void;\n\n  /**\n   * Sets the blend mode that is, the mode used to combine source color\n   * with destination color.\n   * @param mode\n   */\n  setBlendMode: (blendMode: BlendMode) => void;\n\n  /**\n   *  Sets alpha and RGB used when stroking and filling. The color is a 32-bit\n   *  value, unpremultiplied, packing 8-bit components for alpha, red, blue,\n   *  and green.\n   *\n   *   @param color  unpremultiplied ARGB\n   *\n   *    example: https://fiddle.skia.org/c/@Paint_setColor\n   */\n  setColor(color: SkColor): void;\n\n  /**\n   * Sets the current color filter, replacing the existing one if there was one.\n   * @param filter\n   */\n  setColorFilter(filter: SkColorFilter | null): void;\n\n  /**\n   * Sets the current image filter, replacing the existing one if there was one.\n   * @param filter\n   */\n  setImageFilter(filter: SkImageFilter | null): void;\n\n  /**\n   * Sets the current mask filter, replacing the existing one if there was one.\n   * @param filter\n   */\n  setMaskFilter(filter: SkMaskFilter | null): void;\n\n  /**\n   * Sets the current path effect, replacing the existing one if there was one.\n   * @param effect\n   */\n  setPathEffect(effect: SkPathEffect | null): void;\n\n  /**\n   * Sets the current shader, replacing the existing one if there was one.\n   * @param shader\n   */\n  setShader(shader: SkShader | null): void;\n\n  /**\n   * Sets the geometry drawn at the beginning and end of strokes.\n   * @param cap\n   */\n  setStrokeCap(cap: StrokeCap): void;\n\n  /**\n   * Sets the geometry drawn at the corners of strokes.\n   * @param join\n   */\n  setStrokeJoin(join: StrokeJoin): void;\n\n  /**\n   * Sets the limit at which a sharp corner is drawn beveled.\n   * @param limit\n   */\n  setStrokeMiter(limit: number): void;\n\n  /**\n   * Sets the thickness of the pen used to outline the shape.\n   * @param width\n   */\n  setStrokeWidth(width: number): void;\n\n  /**\n   * Sets whether the geometry is filled or stroked.\n   * @param style\n   */\n  setStyle(style: PaintStyle): void;\n}\n"]}

package/lib/commonjs/skia/types/Paint/index.js

@@ -0,0 +1,32 @@
+"use strict";
+
+Object.defineProperty(exports, "__esModule", {
+  value: true
+});
+
+var _Paint = require("./Paint");
+
+Object.keys(_Paint).forEach(function (key) {
+  if (key === "default" || key === "__esModule") return;
+  if (key in exports && exports[key] === _Paint[key]) return;
+  Object.defineProperty(exports, key, {
+    enumerable: true,
+    get: function () {
+      return _Paint[key];
+    }
+  });
+});
+
+var _BlendMode = require("./BlendMode");
+
+Object.keys(_BlendMode).forEach(function (key) {
+  if (key === "default" || key === "__esModule") return;
+  if (key in exports && exports[key] === _BlendMode[key]) return;
+  Object.defineProperty(exports, key, {
+    enumerable: true,
+    get: function () {
+      return _BlendMode[key];
+    }
+  });
+});
+//# sourceMappingURL=index.js.map

package/lib/commonjs/skia/types/Paint/index.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":["index.ts"],"names":[],"mappings":";;;;;;AAAA;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;;AACA;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA","sourcesContent":["export * from \"./Paint\";\nexport * from \"./BlendMode\";\n"]}

package/lib/commonjs/skia/types/Path/Path.js

@@ -0,0 +1,48 @@
+"use strict";
+
+Object.defineProperty(exports, "__esModule", {
+  value: true
+});
+exports.isPath = exports.PathVerb = exports.PathOp = exports.FillType = void 0;
+
+/**
+ * Options used for Path.stroke(). If an option is omitted, a sensible default will be used.
+ */
+let FillType;
+exports.FillType = FillType;
+
+(function (FillType) {
+  FillType[FillType["Winding"] = 0] = "Winding";
+  FillType[FillType["EvenOdd"] = 1] = "EvenOdd";
+  FillType[FillType["InverseWinding"] = 2] = "InverseWinding";
+  FillType[FillType["InverseEvenOdd"] = 3] = "InverseEvenOdd";
+})(FillType || (exports.FillType = FillType = {}));
+
+let PathOp;
+exports.PathOp = PathOp;
+
+(function (PathOp) {
+  PathOp[PathOp["Difference"] = 0] = "Difference";
+  PathOp[PathOp["Intersect"] = 1] = "Intersect";
+  PathOp[PathOp["Union"] = 2] = "Union";
+  PathOp[PathOp["XOR"] = 3] = "XOR";
+  PathOp[PathOp["ReverseDifference"] = 4] = "ReverseDifference";
+})(PathOp || (exports.PathOp = PathOp = {}));
+
+let PathVerb;
+exports.PathVerb = PathVerb;
+
+(function (PathVerb) {
+  PathVerb[PathVerb["Move"] = 0] = "Move";
+  PathVerb[PathVerb["Line"] = 1] = "Line";
+  PathVerb[PathVerb["Quad"] = 2] = "Quad";
+  PathVerb[PathVerb["Conic"] = 3] = "Conic";
+  PathVerb[PathVerb["Cubic"] = 4] = "Cubic";
+  PathVerb[PathVerb["Close"] = 5] = "Close";
+  PathVerb[PathVerb["Done"] = 6] = "Done";
+})(PathVerb || (exports.PathVerb = PathVerb = {}));
+
+const isPath = obj => obj !== null && obj.__typename__ === "Path";
+
+exports.isPath = isPath;
+//# sourceMappingURL=Path.js.map

package/lib/commonjs/skia/types/Path/Path.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":["Path.ts"],"names":["FillType","PathOp","PathVerb","isPath","obj","__typename__"],"mappings":";;;;;;;AAOA;AACA;AACA;IAeYA,Q;;;WAAAA,Q;AAAAA,EAAAA,Q,CAAAA,Q;AAAAA,EAAAA,Q,CAAAA,Q;AAAAA,EAAAA,Q,CAAAA,Q;AAAAA,EAAAA,Q,CAAAA,Q;GAAAA,Q,wBAAAA,Q;;IAOAC,M;;;WAAAA,M;AAAAA,EAAAA,M,CAAAA,M;AAAAA,EAAAA,M,CAAAA,M;AAAAA,EAAAA,M,CAAAA,M;AAAAA,EAAAA,M,CAAAA,M;AAAAA,EAAAA,M,CAAAA,M;GAAAA,M,sBAAAA,M;;IAQAC,Q;;;WAAAA,Q;AAAAA,EAAAA,Q,CAAAA,Q;AAAAA,EAAAA,Q,CAAAA,Q;AAAAA,EAAAA,Q,CAAAA,Q;AAAAA,EAAAA,Q,CAAAA,Q;AAAAA,EAAAA,Q,CAAAA,Q;AAAAA,EAAAA,Q,CAAAA,Q;AAAAA,EAAAA,Q,CAAAA,Q;GAAAA,Q,wBAAAA,Q;;AAYL,MAAMC,MAAM,GAAIC,GAAD,IACpBA,GAAG,KAAK,IAAR,IAAgBA,GAAG,CAACC,YAAJ,KAAqB,MADhC","sourcesContent":["import type { SkRect } from \"../Rect\";\nimport type { SkPoint } from \"../Point\";\nimport type { SkRRect } from \"../RRect\";\nimport type { StrokeJoin, StrokeCap } from \"../Paint\";\nimport type { SkMatrix } from \"../Matrix\";\nimport type { SkJSIInstance } from \"../JsiInstance\";\n\n/**\n * Options used for Path.stroke(). If an option is omitted, a sensible default will be used.\n */\nexport interface StrokeOpts {\n  /** The width of the stroked lines. */\n  width?: number;\n  // eslint-disable-next-line camelcase\n  miter_limit?: number;\n  /**\n   * if > 1, increase precision, else if (0 < resScale < 1) reduce precision to\n   * favor speed and size\n   */\n  precision?: number;\n  join?: StrokeJoin;\n  cap?: StrokeCap;\n}\n\nexport enum FillType {\n  Winding,\n  EvenOdd,\n  InverseWinding,\n  InverseEvenOdd,\n}\n\nexport enum PathOp {\n  Difference, //!< subtract the op path from the first path\n  Intersect, //!< intersect the two paths\n  Union, //!< union (inclusive-or) the two paths\n  XOR, //!< exclusive-or the two paths\n  ReverseDifference,\n}\n\nexport enum PathVerb {\n  Move,\n  Line,\n  Quad,\n  Conic,\n  Cubic,\n  Close,\n  Done,\n}\n\nexport type PathCommand = number[];\n\nexport const isPath = (obj: SkJSIInstance<string> | null): obj is SkPath =>\n  obj !== null && obj.__typename__ === \"Path\";\n\nexport interface SkPath extends SkJSIInstance<\"Path\"> {\n  /**\n   * Appends arc to Path, as the start of new contour. Arc added is part of ellipse\n   * bounded by oval, from startAngle through sweepAngle. Both startAngle and\n   * sweepAngle are measured in degrees, where zero degrees is aligned with the\n   * positive x-axis, and positive sweeps extends arc clockwise.\n   * Returns the modified path for easier chaining.\n   * @param oval\n   * @param startAngle\n   * @param sweepAngle\n   */\n  addArc(\n    oval: SkRect,\n    startAngleInDegrees: number,\n    sweepAngleInDegrees: number\n  ): SkPath;\n\n  /**\n   * Adds oval to Path, appending kMove_Verb, four kConic_Verb, and kClose_Verb.\n   * Oval is upright ellipse bounded by Rect oval with radii equal to half oval width\n   * and half oval height. Oval begins at start and continues clockwise by default.\n   * Returns the modified path for easier chaining.\n   * @param oval\n   * @param isCCW - if the path should be drawn counter-clockwise or not\n   * @param startIndex - index of initial point of ellipse\n   */\n  addOval(oval: SkRect, isCCW?: boolean, startIndex?: number): SkPath;\n\n  /**\n   * Returns the number of points in this path. Initially zero.\n   */\n  countPoints(): number;\n\n  /**\n   * Adds contour created from array of n points, adding (count - 1) line segments.\n   * Contour added starts at pts[0], then adds a line for every additional point\n   * in pts array. If close is true, appends kClose_Verb to Path, connecting\n   * pts[count - 1] and pts[0].\n   * Returns the modified path for easier chaining.\n   * @param points\n   * @param close - if true, will add a line connecting last point to the first point.\n   */\n  addPoly(points: SkPoint[], close: boolean): SkPath;\n\n  /** Adds beginning of contour at SkPoint (x, y).\n\n        @param x  x-axis value of contour start\n        @param y  y-axis value of contour start\n        @return   reference to SkPath\n\n        example: https://fiddle.skia.org/c/@Path_moveTo\n    */\n  moveTo(x: number, y: number): SkPath;\n  /** Adds line from last point to (x, y). If SkPath is empty, or last SkPath::Verb is\n        kClose_Verb, last point is set to (0, 0) before adding line.\n\n        lineTo() appends kMove_Verb to verb array and (0, 0) to SkPoint array, if needed.\n        lineTo() then appends kLine_Verb to verb array and (x, y) to SkPoint array.\n\n        @param x  end of added line on x-axis\n        @param y  end of added line on y-axis\n        @return   reference to SkPath\n\n        example: https://fiddle.skia.org/c/@Path_lineTo\n    */\n  lineTo(x: number, y: number): SkPath;\n\n  /**\n   * Returns a new path that covers the same area as the original path, but with the\n   * Winding FillType. This may re-draw some contours in the path as counter-clockwise\n   * instead of clockwise to achieve that effect. If such a transformation cannot\n   * be done, null is returned.\n   */\n  makeAsWinding(): SkPath | null;\n\n  /**\n   * Translates all the points in the path by dx, dy.\n   * @param dx\n   * @param dy\n   */\n  offset(dx: number, dy: number): SkPath;\n\n  /**\n   * Relative version of arcToRotated.\n   * @param rx\n   * @param ry\n   * @param xAxisRotate\n   * @param useSmallArc\n   * @param isCCW\n   * @param dx\n   * @param dy\n   */\n  rArcTo(\n    rx: number,\n    ry: number,\n    xAxisRotateInDegrees: number,\n    useSmallArc: boolean,\n    isCCW: boolean,\n    dx: number,\n    dy: number\n  ): SkPath;\n\n  /**\n   * Relative version of conicTo.\n   * @param dx1\n   * @param dy1\n   * @param dx2\n   * @param dy2\n   * @param w\n   */\n  rConicTo(\n    dx1: number,\n    dy1: number,\n    dx2: number,\n    dy2: number,\n    w: number\n  ): SkPath;\n\n  /**\n   * Relative version of cubicTo.\n   * @param cpx1\n   * @param cpy1\n   * @param cpx2\n   * @param cpy2\n   * @param x\n   * @param y\n   */\n  rCubicTo(\n    cpx1: number,\n    cpy1: number,\n    cpx2: number,\n    cpy2: number,\n    x: number,\n    y: number\n  ): SkPath;\n\n  /**\n   * Relative version of moveTo.\n   * @param x\n   * @param y\n   */\n  rMoveTo(x: number, y: number): SkPath;\n\n  /**\n   * Relative version of lineTo.\n   * @param x\n   * @param y\n   */\n  rLineTo(x: number, y: number): SkPath;\n\n  /**\n   * Relative version of quadTo.\n   * @param x1\n   * @param y1\n   * @param x2\n   * @param y2\n   */\n  rQuadTo(x1: number, y1: number, x2: number, y2: number): SkPath;\n\n  /**\n   * Sets FillType, the rule used to fill Path.\n   * @param fill\n   */\n  setFillType(fill: FillType): void;\n\n  /**\n   * Specifies whether Path is volatile; whether it will be altered or discarded\n   * by the caller after it is drawn. Path by default have volatile set false.\n   *\n   * Mark animating or temporary paths as volatile to improve performance.\n   * Mark unchanging Path non-volatile to improve repeated rendering.\n   * @param volatile\n   */\n  setIsVolatile(volatile: boolean): void;\n\n  /**\n   * Turns this path into the filled equivalent of the stroked path. Returns false if the operation\n   * fails (e.g. the path is a hairline).\n   * @param opts - describe how stroked path should look.\n   * If such a transformation cannot be done, null is returned.\n   */\n  stroke(opts?: StrokeOpts): null | SkPath;\n\n  /**\n   * Appends CLOSE_VERB to Path. A closed contour connects the first and last point\n   * with a line, forming a continuous loop.\n   */\n  close(): void;\n\n  /**\n   * Sets Path to its initial state.\n   * Removes verb array, point array, and weights, and sets FillType to Winding.\n   * Internal storage associated with Path is released\n   */\n  reset(): void;\n\n  /**\n   * Sets Path to its initial state.\n   * Removes verb array, point array, and weights, and sets FillType to Winding.\n   * Internal storage associated with Path is *not* released.\n   * Use rewind() instead of reset() if Path storage will be reused and performance\n   * is critical.\n   */\n  rewind(): void;\n\n  /**\n   * Returns minimum and maximum axes values of the lines and curves in Path.\n   * Returns (0, 0, 0, 0) if Path contains no points.\n   * Returned bounds width and height may be larger or smaller than area affected\n   * when Path is drawn.\n   *\n   * Behaves identically to getBounds() when Path contains\n   * only lines. If Path contains curves, computed bounds includes\n   * the maximum extent of the quad, conic, or cubic; is slower than getBounds();\n   * and unlike getBounds(), does not cache the result.\n   */\n  computeTightBounds(): SkRect;\n\n  /**\n   * Appends arc to Path. Arc added is part of ellipse\n   * bounded by oval, from startAngle through sweepAngle. Both startAngle and\n   * sweepAngle are measured in degrees, where zero degrees is aligned with the\n   * positive x-axis, and positive sweeps extends arc clockwise.\n   * Returns the modified path for easier chaining.\n   * @param oval\n   * @param startAngleInDegrees\n   * @param sweepAngleInDegrees\n   * @param forceMoveTo\n   */\n  arcToOval(\n    oval: SkRect,\n    startAngleInDegrees: number,\n    sweepAngleInDegrees: number,\n    forceMoveTo: boolean\n  ): SkPath;\n\n  /**\n   * Appends arc to Path. Arc is implemented by one or more conics weighted to\n   * describe part of oval with radii (rx, ry) rotated by xAxisRotate degrees. Arc\n   * curves from last Path Point to (x, y), choosing one of four possible routes:\n   * clockwise or counterclockwise, and smaller or larger. See SkPath.h for more details.\n   * Returns the modified path for easier chaining.\n   * @param rx\n   * @param ry\n   * @param xAxisRotate\n   * @param useSmallArc\n   * @param isCCW\n   * @param x\n   * @param y\n   */\n  arcToRotated(\n    rx: number,\n    ry: number,\n    xAxisRotateInDegrees: number,\n    useSmallArc: boolean,\n    isCCW: boolean,\n    x: number,\n    y: number\n  ): SkPath;\n\n  /**\n   * Appends arc to Path, after appending line if needed. Arc is implemented by conic\n   * weighted to describe part of circle. Arc is contained by tangent from\n   * last Path point to (x1, y1), and tangent from (x1, y1) to (x2, y2). Arc\n   * is part of circle sized to radius, positioned so it touches both tangent lines.\n   * Returns the modified path for easier chaining.\n   * @param x1\n   * @param y1\n   * @param x2\n   * @param y2\n   * @param radius\n   */\n  arcToTangent(\n    x1: number,\n    y1: number,\n    x2: number,\n    y2: number,\n    radius: number\n  ): SkPath;\n\n  /**\n   * Adds conic from last point towards (x1, y1), to (x2, y2), weighted by w.\n   * If Path is empty, or path is closed, the last point is set to (0, 0)\n   * before adding conic.\n   * Returns the modified path for easier chaining.\n   * @param x1\n   * @param y1\n   * @param x2\n   * @param y2\n   * @param w\n   */\n  conicTo(x1: number, y1: number, x2: number, y2: number, w: number): SkPath;\n\n  /**\n   * Returns true if the point (x, y) is contained by Path, taking into\n   * account FillType.\n   * @param x\n   * @param y\n   */\n  contains(x: number, y: number): boolean;\n\n  /**\n   * Returns a copy of this Path.\n   */\n  copy(): SkPath;\n\n  /**\n   *  Adds cubic from last point towards (x1, y1), then towards (x2, y2), ending at\n   * (x3, y3). If Path is empty, or path is closed, the last point is set to\n   * (0, 0) before adding cubic.\n   * @param cpx1\n   * @param cpy1\n   * @param cpx2\n   * @param cpy2\n   * @param x\n   * @param y\n   */\n  cubicTo(\n    cpx1: number,\n    cpy1: number,\n    cpx2: number,\n    cpy2: number,\n    x: number,\n    y: number\n  ): SkPath;\n\n  /**\n   * Changes this path to be the dashed version of itself. This is the same effect as creating\n   * a DashPathEffect and calling filterPath on this path.\n   * @param on\n   * @param off\n   * @param phase\n   */\n  dash(on: number, off: number, phase: number): boolean;\n\n  /**\n   * Returns true if other path is equal to this path.\n   * @param other\n   */\n  equals(other: SkPath): boolean;\n\n  /**\n   * Returns minimum and maximum axes values of Point array.\n   * Returns (0, 0, 0, 0) if Path contains no points. Returned bounds width and height may\n   * be larger or smaller than area affected when Path is drawn.\n   */\n  getBounds(): SkRect;\n\n  /**\n   * Return the FillType for this path.\n   */\n  getFillType(): FillType;\n\n  /**\n   Adds quad from last point towards (x1, y1), to (x2, y2).\n\n   If SkPath is empty, or last SkPath::Verb is kClose_Verb, last point is set to (0, 0) before adding quad.\n\n   Appends kMove_Verb to verb array and (0, 0) to SkPoint array, if needed; then appends kQuad_Verb to verb array;\n   and (x1, y1), (x2, y2) to SkPoint array.\n\n   Parameters\n   x1\tcontrol SkPoint of quad on x-axis\n   y1\tcontrol SkPoint of quad on y-axis\n   x2\tend SkPoint of quad on x-axis\n   y2\tend SkPoint of quad on y-axis\n   Returns\n   reference to SkPath\n   example: https://fiddle.skia.org/c/@Path_quadTo\n  */\n  quadTo(x1: number, y1: number, x2: number, y2: number): void;\n\n  /**\n   * Adds Rect to Path, appending kMove_Verb, three kLine_Verb, and kClose_Verb,\n   * starting with top-left corner of Rect; followed by top-right, bottom-right,\n   * and bottom-left if isCCW is false; or followed by bottom-left,\n   * bottom-right, and top-right if isCCW is true.\n   * Returns the modified path for easier chaining.\n   * @param rect\n   * @param isCCW\n   */\n  addRect(rect: SkRect, isCCW?: boolean): void;\n\n  /**\n   * Adds rrect to Path, creating a new closed contour.\n   * Returns the modified path for easier chaining.\n   * @param rrect\n   * @param isCCW\n   */\n  addRRect(rrect: SkRRect, isCCW?: boolean): SkPath;\n\n  /**\n   * Returns the Point at index in Point array. Valid range for index is\n   * 0 to countPoints() - 1.\n   * @param index\n   */\n  getPoint(index: number): SkPoint;\n\n  /**\n   * Returns true if there are no verbs in the path.\n   */\n  isEmpty(): boolean;\n\n  /**\n   * Returns true if the path is volatile; it will not be altered or discarded\n   * by the caller after it is drawn. Path by default have volatile set false, allowing\n   * Surface to attach a cache of data which speeds repeated drawing. If true, Surface\n   * may not speed repeated drawing.\n   */\n  isVolatile(): boolean;\n\n  /** Adds circle centered at (x, y) of size radius to SkPath, appending kMove_Verb,\n      four kConic_Verb, and kClose_Verb. Circle begins at: (x + radius, y), continuing\n      clockwise if dir is kCW_Direction, and counterclockwise if dir is kCCW_Direction.\n\n      Has no effect if radius is zero or negative.\n\n      @param x       center of circle\n      @param y       center of circle\n      @param radius  distance from center to edge      \n      @return        reference to SkPath\n  */\n  addCircle(x: number, y: number, r: number): SkPath;\n\n  getLastPt(): { x: number; y: number };\n\n  /** Set this path to the result of applying the Op to this path and the\n    specified path: this = (this op operand).\n    The resulting path will be constructed from non-overlapping contours.\n    The curve order is reduced where possible so that cubics may be turned\n    into quadratics, and quadratics maybe turned into lines.\n\n    Returns true if operation was able to produce a result;\n    otherwise, result is unmodified.\n\n    @param path The second path (for difference, the subtrahend)\n    @param op The operator to apply.\n    @param result The product of the operands. The result may be one of the\n                  inputs.\n    @return True if the operation succeeded.\n    */\n  op(path: SkPath, op: PathOp): boolean;\n\n  /** Set this path to a set of non-overlapping contours that describe the\n    same area as the original path.\n    The curve order is reduced where possible so that cubics may\n    be turned into quadratics, and quadratics maybe turned into lines.\n\n    Returns true if operation was able to produce a result;\n    otherwise, result is unmodified.\n\n    @param result The simplified path. The result may be the input.\n    @return True if simplification succeeded.\n  */\n  simplify(): boolean;\n\n  /**\n   * Returns this path as an SVG string.\n   */\n  toSVGString(): string;\n\n  /**\n   * Take start and stop \"t\" values (values between 0...1), and modify this path such that\n   * it is a subset of the original path.\n   * The trim values apply to the entire path, so if it contains several contours, all of them\n   * are including in the calculation.\n   * Null is returned if either input value is NaN.\n   * @param startT - a value in the range [0.0, 1.0]. 0.0 is the beginning of the path.\n   * @param stopT  - a value in the range [0.0, 1.0]. 1.0 is the end of the path.\n   * @param isComplement\n   */\n  trim(startT: number, stopT: number, isComplement: boolean): null | SkPath;\n\n  /**\n   * Transforms the path by the specified matrix.\n   */\n  transform(m3: SkMatrix): void;\n\n  /**\n   * Interpolates between Path with point array of equal size.\n   * Copy verb array and weights to result, and set result path to a weighted\n   * average of this path array and ending path.\n\n   *  weight is most useful when between zero (ending path) and\n      one (this path); will work with values outside of this\n      range.\n\n   * interpolate() returns undefined if path is not\n   * the same size as ending path. Call isInterpolatable() to check Path\n   * compatibility prior to calling interpolate().\n\n   * @param ending  path to interpolate with\n   * @param weight  contribution of this path, and\n   *                 one minus contribution of ending path\n   * @return        Path replaced by interpolated averages or null if \n   *                not interpolatable\n   * */\n  interpolate(end: SkPath, weight: number): SkPath | null;\n\n  /** Returns true if Path contain equal verbs and equal weights.\n   *     @param compare  path to compare\n   *     @return         true if Path can be interpolated equivalent\n   *\n   * */\n  isInterpolatable(compare: SkPath): boolean;\n\n  /**\n   * Serializes the contents of this path as a series of commands.\n   */\n  toCmds(): PathCommand[];\n}\n"]}

package/lib/commonjs/skia/types/Path/index.js

@@ -0,0 +1,32 @@
+"use strict";
+
+Object.defineProperty(exports, "__esModule", {
+  value: true
+});
+
+var _Path = require("./Path");
+
+Object.keys(_Path).forEach(function (key) {
+  if (key === "default" || key === "__esModule") return;
+  if (key in exports && exports[key] === _Path[key]) return;
+  Object.defineProperty(exports, key, {
+    enumerable: true,
+    get: function () {
+      return _Path[key];
+    }
+  });
+});
+
+var _PathFactory = require("./PathFactory");
+
+Object.keys(_PathFactory).forEach(function (key) {
+  if (key === "default" || key === "__esModule") return;
+  if (key in exports && exports[key] === _PathFactory[key]) return;
+  Object.defineProperty(exports, key, {
+    enumerable: true,
+    get: function () {
+      return _PathFactory[key];
+    }
+  });
+});
+//# sourceMappingURL=index.js.map

package/lib/commonjs/skia/types/Path/index.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":["index.ts"],"names":[],"mappings":";;;;;;AAAA;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;;AACA;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA","sourcesContent":["export * from \"./Path\";\nexport * from \"./PathFactory\";\n"]}

package/lib/commonjs/skia/types/PathEffect.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":["PathEffect.ts"],"names":["isPathEffect","obj","__typename__","Path1DEffectStyle"],"mappings":";;;;;;;AAMO,MAAMA,YAAY,GACvBC,GAD0B,IAEFA,GAAG,KAAK,IAAR,IAAgBA,GAAG,CAACC,YAAJ,KAAqB,YAFxD;;;IAIKC,iB;;;WAAAA,iB;AAAAA,EAAAA,iB,CAAAA,iB;AAAAA,EAAAA,iB,CAAAA,iB;AAAAA,EAAAA,iB,CAAAA,iB;GAAAA,iB,iCAAAA,iB","sourcesContent":["import type { SkJSIInstance } from \"./JsiInstance\";\nimport type { SkPath } from \"./Path/Path\";\nimport type { SkMatrix } from \"./Matrix\";\n\nexport type SkPathEffect = SkJSIInstance<\"PathEffect\">;\n\nexport const isPathEffect = (\n  obj: SkJSIInstance<string> | null\n): obj is SkPathEffect => obj !== null && obj.__typename__ === \"PathEffect\";\n\nexport enum Path1DEffectStyle {\n  Translate,\n  Rotate,\n  Morph,\n}\n\nexport interface PathEffectFactory {\n  /**\n   * Returns a PathEffect that can turn sharp corners into rounded corners.\n   * @param radius - if <=0, returns null\n   */\n  MakeCorner(radius: number): SkPathEffect | null;\n\n  /**\n   * Returns a PathEffect that add dashes to the path.\n   *\n   * See SkDashPathEffect.h for more details.\n   *\n   * @param intervals - even number of entries with even indicies specifying the length of\n   *                    the \"on\" intervals, and the odd indices specifying the length of \"off\".\n   * @param phase - offset length into the intervals array. Defaults to 0.\n   */\n  MakeDash(intervals: number[], phase?: number): SkPathEffect;\n\n  /**\n   * Returns a PathEffect that breaks path into segments of segLength length, and randomly move\n   * the endpoints away from the original path by a maximum of deviation.\n   * @param segLength - length of the subsegments.\n   * @param dev - limit of the movement of the endpoints.\n   * @param seedAssist - modifies the randomness. See SkDiscretePathEffect.h for more.\n   */\n  MakeDiscrete(\n    segLength: number,\n    dev: number,\n    seedAssist: number\n  ): SkPathEffect;\n\n  /**\n   *\n   * A pathEffect whose effect is to apply first the inner pathEffect and the the\n   * outer pathEffect (i.e. outer(inner(path))).\n   *\n   */\n  MakeCompose(outer: SkPathEffect, inner: SkPathEffect): SkPathEffect;\n\n  /**\n   *\n   * A pathEffect pathEffect whose effect is to apply two effects,\n   * in sequence (i.e. first(path) + second(path)).\n   *\n   */\n  MakeSum(outer: SkPathEffect, inner: SkPathEffect): SkPathEffect;\n\n  /**\n   * Returns a PathEffect that will fill the drawing path with a pattern made by applying\n   * the given matrix to a repeating set of infinitely long lines of the given width.\n   * For example, the scale of the provided matrix will determine how far apart the lines\n   * should be drawn its rotation affects the lines' orientation.\n   * @param width - must be >= 0\n   * @param matrix\n   */\n  MakeLine2D(width: number, matrix: SkMatrix): SkPathEffect | null;\n\n  /**\n   * Returns a PathEffect which implements dashing by replicating the specified path.\n   *   @param path The path to replicate (dash)\n   *   @param advance The space between instances of path\n   *   @param phase distance (mod advance) along path for its initial position\n   *   @param style how to transform path at each point (based on the current\n   *                position and tangent)\n   */\n  MakePath1D(\n    path: SkPath,\n    advance: number,\n    phase: number,\n    style: Path1DEffectStyle\n  ): SkPathEffect | null;\n\n  /**\n   * Returns a PathEffect that will fill the drawing path with a pattern by repeating the\n   * given path according to the provided matrix. For example, the scale of the matrix\n   * determines how far apart the path instances should be drawn.\n   * @param matrix\n   * @param path\n   */\n  MakePath2D(matrix: SkMatrix, path: SkPath): SkPathEffect | null;\n}\n"]}

package/lib/commonjs/skia/types/Picture/index.js

@@ -0,0 +1,45 @@
+"use strict";
+
+Object.defineProperty(exports, "__esModule", {
+  value: true
+});
+
+var _Picture = require("./Picture");
+
+Object.keys(_Picture).forEach(function (key) {
+  if (key === "default" || key === "__esModule") return;
+  if (key in exports && exports[key] === _Picture[key]) return;
+  Object.defineProperty(exports, key, {
+    enumerable: true,
+    get: function () {
+      return _Picture[key];
+    }
+  });
+});
+
+var _PictureRecorder = require("./PictureRecorder");
+
+Object.keys(_PictureRecorder).forEach(function (key) {
+  if (key === "default" || key === "__esModule") return;
+  if (key in exports && exports[key] === _PictureRecorder[key]) return;
+  Object.defineProperty(exports, key, {
+    enumerable: true,
+    get: function () {
+      return _PictureRecorder[key];
+    }
+  });
+});
+
+var _PictureFactory = require("./PictureFactory");
+
+Object.keys(_PictureFactory).forEach(function (key) {
+  if (key === "default" || key === "__esModule") return;
+  if (key in exports && exports[key] === _PictureFactory[key]) return;
+  Object.defineProperty(exports, key, {
+    enumerable: true,
+    get: function () {
+      return _PictureFactory[key];
+    }
+  });
+});
+//# sourceMappingURL=index.js.map

package/lib/commonjs/skia/types/Picture/index.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":["index.ts"],"names":[],"mappings":";;;;;;AAAA;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;;AACA;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;;AACA;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA","sourcesContent":["export * from \"./Picture\";\nexport * from \"./PictureRecorder\";\nexport * from \"./PictureFactory\";\n"]}

package/lib/commonjs/skia/types/Point.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":["Point.ts"],"names":["PointMode"],"mappings":";;;;;;IAAYA,S;;;WAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;AAAAA,EAAAA,S,CAAAA,S;GAAAA,S,yBAAAA,S","sourcesContent":["export enum PointMode {\n  Points,\n  Lines,\n  Polygon,\n}\n\nexport interface SkPoint {\n  readonly x: number;\n  readonly y: number;\n}\n\nexport type Vector = SkPoint;\n"]}

package/lib/commonjs/skia/types/RRect.js

@@ -0,0 +1,13 @@
+"use strict";
+
+Object.defineProperty(exports, "__esModule", {
+  value: true
+});
+exports.isRRect = void 0;
+
+// We have an issue to check property existence on JSI backed instances
+const isRRect = def => // eslint-disable-next-line @typescript-eslint/no-explicit-any
+def.rect !== undefined;
+
+exports.isRRect = isRRect;
+//# sourceMappingURL=RRect.js.map

package/lib/commonjs/skia/types/RRect.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":["RRect.ts"],"names":["isRRect","def","rect","undefined"],"mappings":";;;;;;;AAQA;AACO,MAAMA,OAAO,GAAIC,GAAD,IACrB;AACCA,GAAD,CAAaC,IAAb,KAAsBC,SAFjB","sourcesContent":["import type { SkRect } from \"./Rect\";\n\nexport interface SkRRect {\n  readonly rect: SkRect;\n  readonly rx: number;\n  readonly ry: number;\n}\n\n// We have an issue to check property existence on JSI backed instances\nexport const isRRect = (def: SkRect | SkRRect): def is SkRRect =>\n  // eslint-disable-next-line @typescript-eslint/no-explicit-any\n  (def as any).rect !== undefined;\n"]}

package/lib/commonjs/skia/types/SVG/index.js

@@ -0,0 +1,32 @@
+"use strict";
+
+Object.defineProperty(exports, "__esModule", {
+  value: true
+});
+
+var _SVG = require("./SVG");
+
+Object.keys(_SVG).forEach(function (key) {
+  if (key === "default" || key === "__esModule") return;
+  if (key in exports && exports[key] === _SVG[key]) return;
+  Object.defineProperty(exports, key, {
+    enumerable: true,
+    get: function () {
+      return _SVG[key];
+    }
+  });
+});
+
+var _SVGFactory = require("./SVGFactory");
+
+Object.keys(_SVGFactory).forEach(function (key) {
+  if (key === "default" || key === "__esModule") return;
+  if (key in exports && exports[key] === _SVGFactory[key]) return;
+  Object.defineProperty(exports, key, {
+    enumerable: true,
+    get: function () {
+      return _SVGFactory[key];
+    }
+  });
+});
+//# sourceMappingURL=index.js.map

package/lib/commonjs/skia/types/SVG/index.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":["index.ts"],"names":[],"mappings":";;;;;;AAAA;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;;AACA;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA","sourcesContent":["export * from \"./SVG\";\nexport * from \"./SVGFactory\";\n"]}