@shopify/cli 3.69.3 → 3.70.0

package/dist/assets/cli-ruby/vendor/deps/webrick/lib/webrick/httpversion.rb

@@ -1,76 +0,0 @@
-# frozen_string_literal: true
-#--
-# HTTPVersion.rb -- presentation of HTTP version
-#
-# Author: IPR -- Internet Programming with Ruby -- writers
-# Copyright (c) 2002 Internet Programming with Ruby writers. All rights
-# reserved.
-#
-# $IPR: httpversion.rb,v 1.5 2002/09/21 12:23:37 gotoyuzo Exp $
-
-module WEBrick
-
-  ##
-  # Represents an HTTP protocol version
-
-  class HTTPVersion
-    include Comparable
-
-    ##
-    # The major protocol version number
-
-    attr_accessor :major
-
-    ##
-    # The minor protocol version number
-
-    attr_accessor :minor
-
-    ##
-    # Converts +version+ into an HTTPVersion
-
-    def self.convert(version)
-      version.is_a?(self) ? version : new(version)
-    end
-
-    ##
-    # Creates a new HTTPVersion from +version+.
-
-    def initialize(version)
-      case version
-      when HTTPVersion
-        @major, @minor = version.major, version.minor
-      when String
-        if /^(\d+)\.(\d+)$/ =~ version
-          @major, @minor = $1.to_i, $2.to_i
-        end
-      end
-      if @major.nil? || @minor.nil?
-        raise ArgumentError,
-          format("cannot convert %s into %s", version.class, self.class)
-      end
-    end
-
-    ##
-    # Compares this version with +other+ according to the HTTP specification
-    # rules.
-
-    def <=>(other)
-      unless other.is_a?(self.class)
-        other = self.class.new(other)
-      end
-      if (ret = @major <=> other.major) == 0
-        return @minor <=> other.minor
-      end
-      return ret
-    end
-
-    ##
-    # The HTTP version as show in the HTTP request and response.  For example,
-    # "1.1"
-
-    def to_s
-      format("%d.%d", @major, @minor)
-    end
-  end
-end

package/dist/assets/cli-ruby/vendor/deps/webrick/lib/webrick/log.rb

@@ -1,156 +0,0 @@
-# frozen_string_literal: true
-#--
-# log.rb -- Log Class
-#
-# Author: IPR -- Internet Programming with Ruby -- writers
-# Copyright (c) 2000, 2001 TAKAHASHI Masayoshi, GOTOU Yuuzou
-# Copyright (c) 2002 Internet Programming with Ruby writers. All rights
-# reserved.
-#
-# $IPR: log.rb,v 1.26 2002/10/06 17:06:10 gotoyuzo Exp $
-
-module WEBrick
-
-  ##
-  # A generic logging class
-
-  class BasicLog
-
-    # Fatal log level which indicates a server crash
-
-    FATAL = 1
-
-    # Error log level which indicates a recoverable error
-
-    ERROR = 2
-
-    # Warning log level which indicates a possible problem
-
-    WARN  = 3
-
-    # Information log level which indicates possibly useful information
-
-    INFO  = 4
-
-    # Debugging error level for messages used in server development or
-    # debugging
-
-    DEBUG = 5
-
-    # log-level, messages above this level will be logged
-    attr_accessor :level
-
-    ##
-    # Initializes a new logger for +log_file+ that outputs messages at +level+
-    # or higher.  +log_file+ can be a filename, an IO-like object that
-    # responds to #<< or nil which outputs to $stderr.
-    #
-    # If no level is given INFO is chosen by default
-
-    def initialize(log_file=nil, level=nil)
-      @level = level || INFO
-      case log_file
-      when String
-        @log = File.open(log_file, "a+")
-        @log.sync = true
-        @opened = true
-      when NilClass
-        @log = $stderr
-      else
-        @log = log_file  # requires "<<". (see BasicLog#log)
-      end
-    end
-
-    ##
-    # Closes the logger (also closes the log device associated to the logger)
-    def close
-      @log.close if @opened
-      @log = nil
-    end
-
-    ##
-    # Logs +data+ at +level+ if the given level is above the current log
-    # level.
-
-    def log(level, data)
-      if @log && level <= @level
-        data += "\n" if /\n\Z/ !~ data
-        @log << data
-      end
-    end
-
-    ##
-    # Synonym for log(INFO, obj.to_s)
-    def <<(obj)
-      log(INFO, obj.to_s)
-    end
-
-    # Shortcut for logging a FATAL message
-    def fatal(msg) log(FATAL, "FATAL " + format(msg)); end
-    # Shortcut for logging an ERROR message
-    def error(msg) log(ERROR, "ERROR " + format(msg)); end
-    # Shortcut for logging a WARN message
-    def warn(msg)  log(WARN,  "WARN  " + format(msg)); end
-    # Shortcut for logging an INFO message
-    def info(msg)  log(INFO,  "INFO  " + format(msg)); end
-    # Shortcut for logging a DEBUG message
-    def debug(msg) log(DEBUG, "DEBUG " + format(msg)); end
-
-    # Will the logger output FATAL messages?
-    def fatal?; @level >= FATAL; end
-    # Will the logger output ERROR messages?
-    def error?; @level >= ERROR; end
-    # Will the logger output WARN messages?
-    def warn?;  @level >= WARN; end
-    # Will the logger output INFO messages?
-    def info?;  @level >= INFO; end
-    # Will the logger output DEBUG messages?
-    def debug?; @level >= DEBUG; end
-
-    private
-
-    ##
-    # Formats +arg+ for the logger
-    #
-    # * If +arg+ is an Exception, it will format the error message and
-    #   the back trace.
-    # * If +arg+ responds to #to_str, it will return it.
-    # * Otherwise it will return +arg+.inspect.
-    def format(arg)
-      if arg.is_a?(Exception)
-        +"#{arg.class}: #{AccessLog.escape(arg.message)}\n\t" <<
-        arg.backtrace.join("\n\t") << "\n"
-      elsif arg.respond_to?(:to_str)
-        AccessLog.escape(arg.to_str)
-      else
-        arg.inspect
-      end
-    end
-  end
-
-  ##
-  # A logging class that prepends a timestamp to each message.
-
-  class Log < BasicLog
-    # Format of the timestamp which is applied to each logged line.  The
-    # default is <tt>"[%Y-%m-%d %H:%M:%S]"</tt>
-    attr_accessor :time_format
-
-    ##
-    # Same as BasicLog#initialize
-    #
-    # You can set the timestamp format through #time_format
-    def initialize(log_file=nil, level=nil)
-      super(log_file, level)
-      @time_format = "[%Y-%m-%d %H:%M:%S]"
-    end
-
-    ##
-    # Same as BasicLog#log
-    def log(level, data)
-      tmp = Time.now.strftime(@time_format)
-      tmp << " " << data
-      super(level, tmp)
-    end
-  end
-end

package/dist/assets/cli-ruby/vendor/deps/webrick/lib/webrick/server.rb

@@ -1,381 +0,0 @@
-# frozen_string_literal: true
-#
-# server.rb -- GenericServer Class
-#
-# Author: IPR -- Internet Programming with Ruby -- writers
-# Copyright (c) 2000, 2001 TAKAHASHI Masayoshi, GOTOU Yuuzou
-# Copyright (c) 2002 Internet Programming with Ruby writers. All rights
-# reserved.
-#
-# $IPR: server.rb,v 1.62 2003/07/22 19:20:43 gotoyuzo Exp $
-
-require 'socket'
-require_relative 'config'
-require_relative 'log'
-
-module WEBrick
-
-  ##
-  # Server error exception
-
-  class ServerError < StandardError; end
-
-  ##
-  # Base server class
-
-  class SimpleServer
-
-    ##
-    # A SimpleServer only yields when you start it
-
-    def SimpleServer.start
-      yield
-    end
-  end
-
-  ##
-  # A generic module for daemonizing a process
-
-  class Daemon
-
-    ##
-    # Performs the standard operations for daemonizing a process.  Runs a
-    # block, if given.
-
-    def Daemon.start
-      Process.daemon
-      File.umask(0)
-      yield if block_given?
-    end
-  end
-
-  ##
-  # Base TCP server class.  You must subclass GenericServer and provide a #run
-  # method.
-
-  class GenericServer
-
-    ##
-    # The server status.  One of :Stop, :Running or :Shutdown
-
-    attr_reader :status
-
-    ##
-    # The server configuration
-
-    attr_reader :config
-
-    ##
-    # The server logger.  This is independent from the HTTP access log.
-
-    attr_reader :logger
-
-    ##
-    # Tokens control the number of outstanding clients.  The
-    # <code>:MaxClients</code> configuration sets this.
-
-    attr_reader :tokens
-
-    ##
-    # Sockets listening for connections.
-
-    attr_reader :listeners
-
-    ##
-    # Creates a new generic server from +config+.  The default configuration
-    # comes from +default+.
-
-    def initialize(config={}, default=Config::General)
-      @config = default.dup.update(config)
-      @status = :Stop
-      @config[:Logger] ||= Log::new
-      @logger = @config[:Logger]
-
-      @tokens = Thread::SizedQueue.new(@config[:MaxClients])
-      @config[:MaxClients].times{ @tokens.push(nil) }
-
-      webrickv = WEBrick::VERSION
-      rubyv = "#{RUBY_VERSION} (#{RUBY_RELEASE_DATE}) [#{RUBY_PLATFORM}]"
-      @logger.info("WEBrick #{webrickv}")
-      @logger.info("ruby #{rubyv}")
-
-      @listeners = []
-      @shutdown_pipe = nil
-      unless @config[:DoNotListen]
-        raise ArgumentError, "Port must an integer" unless @config[:Port].to_s == @config[:Port].to_i.to_s
-
-        @config[:Port] = @config[:Port].to_i
-        if @config[:Listen]
-          warn(":Listen option is deprecated; use GenericServer#listen", uplevel: 1)
-        end
-        listen(@config[:BindAddress], @config[:Port])
-        if @config[:Port] == 0
-          @config[:Port] = @listeners[0].addr[1]
-        end
-      end
-    end
-
-    ##
-    # Retrieves +key+ from the configuration
-
-    def [](key)
-      @config[key]
-    end
-
-    ##
-    # Adds listeners from +address+ and +port+ to the server.  See
-    # WEBrick::Utils::create_listeners for details.
-
-    def listen(address, port)
-      @listeners += Utils::create_listeners(address, port)
-    end
-
-    ##
-    # Starts the server and runs the +block+ for each connection.  This method
-    # does not return until the server is stopped from a signal handler or
-    # another thread using #stop or #shutdown.
-    #
-    # If the block raises a subclass of StandardError the exception is logged
-    # and ignored.  If an IOError or Errno::EBADF exception is raised the
-    # exception is ignored.  If an Exception subclass is raised the exception
-    # is logged and re-raised which stops the server.
-    #
-    # To completely shut down a server call #shutdown from ensure:
-    #
-    #   server = WEBrick::GenericServer.new
-    #   # or WEBrick::HTTPServer.new
-    #
-    #   begin
-    #     server.start
-    #   ensure
-    #     server.shutdown
-    #   end
-
-    def start(&block)
-      raise ServerError, "already started." if @status != :Stop
-      server_type = @config[:ServerType] || SimpleServer
-
-      setup_shutdown_pipe
-
-      server_type.start{
-        @logger.info \
-          "#{self.class}#start: pid=#{$$} port=#{@config[:Port]}"
-        @status = :Running
-        call_callback(:StartCallback)
-
-        shutdown_pipe = @shutdown_pipe
-
-        thgroup = ThreadGroup.new
-        begin
-          while @status == :Running
-            begin
-              sp = shutdown_pipe[0]
-              if svrs = IO.select([sp, *@listeners])
-                if svrs[0].include? sp
-                  # swallow shutdown pipe
-                  buf = String.new
-                  nil while String ===
-                            sp.read_nonblock([sp.nread, 8].max, buf, exception: false)
-                  break
-                end
-                svrs[0].each{|svr|
-                  @tokens.pop          # blocks while no token is there.
-                  if sock = accept_client(svr)
-                    unless config[:DoNotReverseLookup].nil?
-                      sock.do_not_reverse_lookup = !!config[:DoNotReverseLookup]
-                    end
-                    th = start_thread(sock, &block)
-                    th[:WEBrickThread] = true
-                    thgroup.add(th)
-                  else
-                    @tokens.push(nil)
-                  end
-                }
-              end
-            rescue Errno::EBADF, Errno::ENOTSOCK, IOError => ex
-              # if the listening socket was closed in GenericServer#shutdown,
-              # IO::select raise it.
-            rescue StandardError => ex
-              msg = "#{ex.class}: #{ex.message}\n\t#{ex.backtrace[0]}"
-              @logger.error msg
-            rescue Exception => ex
-              @logger.fatal ex
-              raise
-            end
-          end
-        ensure
-          cleanup_shutdown_pipe(shutdown_pipe)
-          cleanup_listener
-          @status = :Shutdown
-          @logger.info "going to shutdown ..."
-          thgroup.list.each{|th| th.join if th[:WEBrickThread] }
-          call_callback(:StopCallback)
-          @logger.info "#{self.class}#start done."
-          @status = :Stop
-        end
-      }
-    end
-
-    ##
-    # Stops the server from accepting new connections.
-
-    def stop
-      if @status == :Running
-        @status = :Shutdown
-      end
-
-      alarm_shutdown_pipe {|f| f.write_nonblock("\0")}
-    end
-
-    ##
-    # Shuts down the server and all listening sockets.  New listeners must be
-    # provided to restart the server.
-
-    def shutdown
-      stop
-
-      alarm_shutdown_pipe(&:close)
-    end
-
-    ##
-    # You must subclass GenericServer and implement \#run which accepts a TCP
-    # client socket
-
-    def run(sock)
-      @logger.fatal "run() must be provided by user."
-    end
-
-    private
-
-    # :stopdoc:
-
-    ##
-    # Accepts a TCP client socket from the TCP server socket +svr+ and returns
-    # the client socket.
-
-    def accept_client(svr)
-      case sock = svr.to_io.accept_nonblock(exception: false)
-      when :wait_readable
-        nil
-      else
-        if svr.respond_to?(:start_immediately)
-          sock = OpenSSL::SSL::SSLSocket.new(sock, ssl_context)
-          sock.sync_close = true
-          # we cannot do OpenSSL::SSL::SSLSocket#accept here because
-          # a slow client can prevent us from accepting connections
-          # from other clients
-        end
-        sock
-      end
-    rescue Errno::ECONNRESET, Errno::ECONNABORTED,
-           Errno::EPROTO, Errno::EINVAL
-      nil
-    rescue StandardError => ex
-      msg = "#{ex.class}: #{ex.message}\n\t#{ex.backtrace[0]}"
-      @logger.error msg
-      nil
-    end
-
-    ##
-    # Starts a server thread for the client socket +sock+ that runs the given
-    # +block+.
-    #
-    # Sets the socket to the <code>:WEBrickSocket</code> thread local variable
-    # in the thread.
-    #
-    # If any errors occur in the block they are logged and handled.
-
-    def start_thread(sock, &block)
-      Thread.start{
-        begin
-          Thread.current[:WEBrickSocket] = sock
-          begin
-            addr = sock.peeraddr
-            @logger.debug "accept: #{addr[3]}:#{addr[1]}"
-          rescue SocketError
-            @logger.debug "accept: <address unknown>"
-            raise
-          end
-          if sock.respond_to?(:sync_close=) && @config[:SSLStartImmediately]
-            WEBrick::Utils.timeout(@config[:RequestTimeout]) do
-              begin
-                sock.accept # OpenSSL::SSL::SSLSocket#accept
-              rescue Errno::ECONNRESET, Errno::ECONNABORTED,
-                     Errno::EPROTO, Errno::EINVAL
-                Thread.exit
-              end
-            end
-          end
-          call_callback(:AcceptCallback, sock)
-          block ? block.call(sock) : run(sock)
-        rescue Errno::ENOTCONN
-          @logger.debug "Errno::ENOTCONN raised"
-        rescue ServerError => ex
-          msg = "#{ex.class}: #{ex.message}\n\t#{ex.backtrace[0]}"
-          @logger.error msg
-        rescue Exception => ex
-          @logger.error ex
-        ensure
-          @tokens.push(nil)
-          Thread.current[:WEBrickSocket] = nil
-          if addr
-            @logger.debug "close: #{addr[3]}:#{addr[1]}"
-          else
-            @logger.debug "close: <address unknown>"
-          end
-          sock.close
-        end
-      }
-    end
-
-    ##
-    # Calls the callback +callback_name+ from the configuration with +args+
-
-    def call_callback(callback_name, *args)
-      @config[callback_name]&.call(*args)
-    end
-
-    def setup_shutdown_pipe
-      return @shutdown_pipe ||= IO.pipe
-    end
-
-    def cleanup_shutdown_pipe(shutdown_pipe)
-      @shutdown_pipe = nil
-      shutdown_pipe&.each(&:close)
-    end
-
-    def alarm_shutdown_pipe
-      _, pipe = @shutdown_pipe # another thread may modify @shutdown_pipe.
-      if pipe
-        if !pipe.closed?
-          begin
-            yield pipe
-          rescue IOError # closed by another thread.
-          end
-        end
-      end
-    end
-
-    def cleanup_listener
-      @listeners.each{|s|
-        if @logger.debug?
-          addr = s.addr
-          @logger.debug("close TCPSocket(#{addr[2]}, #{addr[1]})")
-        end
-        begin
-          s.shutdown
-        rescue Errno::ENOTCONN
-          # when `Errno::ENOTCONN: Socket is not connected' on some platforms,
-          # call #close instead of #shutdown.
-          # (ignore @config[:ShutdownSocketWithoutClose])
-          s.close
-        else
-          unless @config[:ShutdownSocketWithoutClose]
-            s.close
-          end
-        end
-      }
-      @listeners.clear
-    end
-  end    # end of GenericServer
-end