@settlemint/dalp-cli 2.1.7-main.26061556440 → 2.1.7-main.26063223238

package/dist/dalp.js

@@ -52349,8 +52349,8 @@ var DAPI_ROUTE_ERROR_ENTRIES = [
       category: "client",
       status: 409,
       message: "Compliance provider cannot transition to the requested state.",
-      why: "The provider is not in a state that permits the requested action (for example, resume requires paused; revoke is terminal).",
-      fix: "Refresh the provider and choose an action that matches its current state.",
+      why: "The provider is not in a state that permits the requested operation (for example, resume requires paused; revoke is terminal).",
+      fix: "Refresh the provider and choose an operation that matches its current state.",
       retryable: false,
       expectedClientError: true,
       surfaces: ["orpc-v2-rest", "orpc-rpc"],
@@ -52384,7 +52384,7 @@ var DAPI_ROUTE_ERROR_ENTRIES = [
       status: 404,
       message: "Compliance provider topic not found.",
       why: "DAPI could not find the requested topic on the compliance provider.",
-      fix: "Verify the webhook identifier and provider before retrying, or add a new topic via the webhooks add endpoint (POST /v2/compliance/providers/{providerId}/webhooks).",
+      fix: "Verify the webhook identifier and provider before retrying, or add a new topic through the provider webhook add endpoint.",
       retryable: false,
       expectedClientError: true,
       surfaces: ["orpc-v2-rest", "orpc-rpc"],
@@ -52650,7 +52650,7 @@ var DAPI_ROUTE_ERROR_ENTRIES = [
       status: 409,
       message: "Idempotency key was reused with a different request",
       why: "The same Idempotency-Key was previously used for a request with a different method, path, or body hash.",
-      fix: "Reuse an Idempotency-Key only for the exact same request, or send a new key for a different request.",
+      fix: "Reuse an Idempotency-Key only for the same request, or send a new key for a different request.",
       retryable: false,
       expectedClientError: true,
       owner: "dapi"
@@ -52664,7 +52664,7 @@ var DAPI_ROUTE_ERROR_ENTRIES = [
       status: 409,
       message: "Idempotency key is already in flight",
       why: "Another request with the same Idempotency-Key is still being processed for this tenant.",
-      fix: "Wait for the in-flight request to finish, then retry the exact same request.",
+      fix: "Wait for the in-flight request to finish, then retry the same request.",
       retryable: true,
       expectedClientError: true,
       owner: "dapi",
@@ -53634,7 +53634,7 @@ var DAPI_ROUTE_ERROR_ENTRIES = [
       status: 504,
       message: "Durable execution engine workflow call timed out",
       why: "A durable execution engine endpoint returned HTTP 504 before the downstream operation completed.",
-      fix: "Check the resource or deployment status before retrying so you do not duplicate a workflow action that may still complete.",
+      fix: "Check the resource or deployment status before retrying so you do not duplicate a workflow step that may still complete.",
       retryable: true,
       expectedClientError: false,
       severity: "warning"
@@ -53983,7 +53983,7 @@ var DAPI_ROUTE_ERROR_ENTRIES = [
       status: 422,
       message: "One or more target currencies are not supported by the configured exchange-rate provider",
       why: "The provider's supported-currency snapshot does not contain every requested code.",
-      fix: "Pick currencies from GET /v2/exchange-rates/supported-currencies, or wait for the next provider refresh if you expect the code to appear.",
+      fix: "Pick currencies from the supported-currencies endpoint, or wait for the next provider refresh if you expect the code to appear.",
       retryable: false,
       expectedClientError: true,
       data: exports_external.object({
@@ -53998,8 +53998,8 @@ var DAPI_ROUTE_ERROR_ENTRIES = [
       category: "dependency",
       status: 503,
       message: "Currency-feed creation could not be queued",
-      why: "The workflow runtime did not durably accept the addCurrencyFeeds dispatch, so the new currencies were not persisted.",
-      fix: "Retry the request; if it continues, contact support with the request id.",
+      why: "The addCurrencyFeeds workflow dispatch was not durably accepted. The new currencies were not persisted.",
+      fix: "Retry the request. If it continues, contact support with the request id.",
       retryable: true,
       expectedClientError: false
     })
@@ -55569,7 +55569,7 @@ var DAPI_ROUTE_ERROR_ENTRIES = [
       category: "client",
       status: 404,
       message: "Paymaster not found with address the requested value. Verify the paymaster address is correct and the paymaster has been indexed. List available paymasters via GET /v2/system/paymasters",
-      why: "DAPI could not find the system paymaster not found address indexed list available paymasters via get v2 in the active system, organization, or indexer scope.",
+      why: "DAPI could not find the requested indexed system paymaster in the active system, organization, or indexer scope.",
       fix: "Verify the identifier, ownership scope, and indexing state before retrying.",
       retryable: false,
       expectedClientError: true
@@ -55966,8 +55966,8 @@ var DAPI_ROUTE_ERROR_ENTRIES = [
       category: "client",
       status: 400,
       message: "Scoped compliance module configuration requires a V2 token compliance engine",
-      why: "The token uses the V1 compliance model, which has no scoped module bindings and cannot atomically update module parameters with a scope.",
-      fix: "Use configureComplianceModule for V1 tokens, or migrate the asset to a V2 token with a per-token compliance engine before configuring scoped modules.",
+      why: "The token uses the legacy compliance model, which has no scoped module bindings and cannot atomically update module parameters with a scope.",
+      fix: "Use configureComplianceModule for legacy tokens, or migrate the asset to a current compliance-engine token before configuring scoped modules.",
       retryable: false,
       expectedClientError: true
     })
@@ -55979,8 +55979,8 @@ var DAPI_ROUTE_ERROR_ENTRIES = [
       category: "client",
       status: 400,
       message: "Scoped compliance module install requires a V2 token compliance engine",
-      why: "The token uses the V1 compliance model, which supports only the legacy single-instance compliance-module install flow.",
-      fix: "Use installComplianceModule for V1 tokens, or migrate the asset to a V2 token with a per-token compliance engine before installing scoped module instances.",
+      why: "The token uses the legacy compliance model, which supports only the single-instance compliance-module install flow.",
+      fix: "Use installComplianceModule for legacy tokens, or migrate the asset to a current compliance-engine token before installing scoped module instances.",
       retryable: false,
       expectedClientError: true
     })
@@ -55992,8 +55992,8 @@ var DAPI_ROUTE_ERROR_ENTRIES = [
       category: "client",
       status: 400,
       message: "Setting a compliance module scope requires a V2 token compliance engine",
-      why: "The token uses the V1 compliance model, which has no per-instance scope state to update.",
-      fix: "Use V1 compliance-module configuration routes for V1 tokens, or migrate the asset to a V2 token with a per-token compliance engine before setting module scope.",
+      why: "The token uses the legacy compliance model, which has no per-instance scope state to update.",
+      fix: "Use legacy compliance-module configuration routes for legacy tokens, or migrate the asset to a current compliance-engine token before setting module scope.",
       retryable: false,
       expectedClientError: true
     })
@@ -57557,7 +57557,7 @@ var DAPI_ROUTE_ERROR_ENTRIES = [
       category: "client",
       status: 404,
       message: "KYC profile not found for this action request",
-      why: "DAPI could not find the user kyc profile not found action in the active system, organization, or indexer scope.",
+      why: "DAPI could not find the user KYC profile for this request in the active system, organization, or indexer scope.",
       fix: "Verify the identifier, ownership scope, and indexing state before retrying.",
       retryable: false,
       expectedClientError: true
@@ -57597,7 +57597,7 @@ var DAPI_ROUTE_ERROR_ENTRIES = [
       category: "client",
       status: 404,
       message: "KYC version not found for this action request",
-      why: "DAPI could not find the user kyc version not found action in the active system, organization, or indexer scope.",
+      why: "DAPI could not find the user KYC version for this request in the active system, organization, or indexer scope.",
       fix: "Verify the identifier, ownership scope, and indexing state before retrying.",
       retryable: false,
       expectedClientError: true
@@ -57978,7 +57978,7 @@ var DAPI_ROUTE_ERROR_ENTRIES = [
       status: 409,
       message: "Maturity-redemption treasury has not granted enough allowance to cover this redemption",
       why: "Before `redeem(amount)` runs, the dapi handler reads `allowance(treasury, featureAddress)` on the denomination asset and compares it to the on-chain `calculatePayout(amount)` payout. The treasury is an externally-owned wallet and its ERC-20 allowance to the maturity-redemption feature contract is below that payout, so `TreasuryPayoutLib.payoutFrom` would revert with `ERC20InsufficientAllowance` inside the redeem transaction. The preflight refuses up front so the redeemer is not charged gas for a doomed tx.",
-      fix: "Sign in as the configured treasury wallet (see `data.treasury`) and grant the maturity-redemption feature an allowance of at least `data.required` base units of the denomination asset via the bond's Manage maturity → Approve allowance action, then retry the redemption. Since ERC-20 `approve` overwrites (not adds), agents should submit `data.required` as the approve amount, not `data.required - data.allowance`. The error's `data` payload carries `allowance` and `required` as base-unit decimal strings, plus the `denominationAsset`, `feature`, and `treasury` addresses.",
+      fix: "Sign in as the configured treasury wallet (see `data.treasury`) and grant the maturity-redemption feature an allowance of at least `data.required` base units of the denomination asset via the bond's Manage maturity → Approve allowance control, then retry the redemption. Since ERC-20 `approve` overwrites (not adds), agents should submit `data.required` as the approve amount, not `data.required - data.allowance`. The error's `data` payload carries `allowance` and `required` as base-unit decimal strings, plus the `denominationAsset`, `feature`, and `treasury` addresses.",
       retryable: true,
       expectedClientError: false,
       data: exports_external.object({
@@ -78517,7 +78517,7 @@ function normalizeDalpBaseUrl(url2) {
 }
 var package_default = {
   name: "@settlemint/dalp-sdk",
-  version: "2.1.7-main.26061556440",
+  version: "2.1.7-main.26063223238",
   private: false,
   description: "Fully typed SDK for the DALP tokenization platform API",
   homepage: "https://settlemint.com",
@@ -79089,7 +79089,7 @@ function toStandardWebhookSecret(secret) {
 // package.json
 var package_default2 = {
   name: "@settlemint/dalp-cli",
-  version: "2.1.7-main.26061556440",
+  version: "2.1.7-main.26063223238",
   private: false,
   description: "CLI for the Digital Asset Lifecycle Platform — manage tokens, identities, compliance, and more from the command line.",
   homepage: "https://settlemint.com",

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@settlemint/dalp-cli",
-  "version": "2.1.7-main.26061556440",
+  "version": "2.1.7-main.26063223238",
   "private": false,
   "description": "CLI for the Digital Asset Lifecycle Platform — manage tokens, identities, compliance, and more from the command line.",
   "homepage": "https://settlemint.com",